├── Dockerfile
├── README.md
├── conf
    ├── apache
    │   └── 000-default.conf
    └── php
    │   └── php.ini
├── docker-compose.yml
└── src
    └── index.php


/Dockerfile:
--------------------------------------------------------------------------------
 1 | FROM php:8-apache
 2 | 
 3 | MAINTAINER Amin Mkh <mukh_amin@yahoo.com> 
 4 | 
 5 | # installing required stuff
 6 | RUN apt-get update \
 7 |     && apt-get install -y unzip libaio-dev libmcrypt-dev git \
 8 |     && apt-get clean -y
 9 | 
10 | # PHP extensions
11 | RUN \
12 |     docker-php-ext-configure pdo_mysql --with-pdo-mysql=mysqlnd \
13 |     && docker-php-ext-configure mysqli \
14 |     && docker-php-ext-install pdo_mysql
15 |     # && docker-php-ext-install mcrypt
16 | 
17 | # xdebug, if you want to debug
18 | RUN pecl install xdebug \
19 |     && docker-php-ext-enable xdebug
20 | 
21 | # PHP composer
22 | RUN curl -sS https://getcomposer.org/installer | php --  --install-dir=/usr/bin --filename=composer
23 | 
24 | # apache configurations, mod rewrite
25 | RUN ln -s /etc/apache2/mods-available/rewrite.load /etc/apache2/mods-enabled/rewrite.load
26 | 
27 | # Oracle instantclient
28 | 
29 | # copy oracle files
30 | # ADD oracle/instantclient-basic-linux.x64-12.1.0.2.0.zip /tmp/
31 | ADD https://download.oracle.com/otn_software/linux/instantclient/211000/instantclient-basic-linux.x64-21.1.0.0.0.zip /tmp/
32 | # ADD oracle/instantclient-sdk-linux.x64-12.1.0.2.0.zip /tmp/
33 | ADD https://download.oracle.com/otn_software/linux/instantclient/211000/instantclient-sdk-linux.x64-21.1.0.0.0.zip /tmp/
34 | # ADD oracle/instantclient-sqlplus-linux.x64-12.1.0.2.0.zip /tmp/
35 | ADD https://download.oracle.com/otn_software/linux/instantclient/211000/instantclient-sqlplus-linux.x64-21.1.0.0.0.zip /tmp/
36 | 
37 | # unzip them
38 | RUN unzip /tmp/instantclient-basic-linux.x64-*.zip -d /usr/local/ \
39 |     && unzip /tmp/instantclient-sdk-linux.x64-*.zip -d /usr/local/ \
40 |     && unzip /tmp/instantclient-sqlplus-linux.x64-*.zip -d /usr/local/
41 | 
42 | # install oci8
43 | RUN ln -s /usr/local/instantclient_*_1 /usr/local/instantclient \
44 |     && ln -s /usr/local/instantclient/sqlplus /usr/bin/sqlplus 
45 | 
46 | RUN docker-php-ext-configure oci8 --with-oci8=instantclient,/usr/local/instantclient \
47 |     && docker-php-ext-install oci8 \
48 |     && echo /usr/local/instantclient/ > /etc/ld.so.conf.d/oracle-insantclient.conf \
49 |     && ldconfig
50 | 


--------------------------------------------------------------------------------
/README.md:
--------------------------------------------------------------------------------
 1 | # Docker php7-oci8-apache
 2 | 
 3 | This image is built on the [official PHP docker image](https://hub.docker.com/_/php/)
 4 | 
 5 | It contains PHP 7, Apache 2, Oracle's OCI8 extension.
 6 | 
 7 | You can use it to connect your docker instance with Oracle DB.
 8 | 
 9 | To use this image, docker-compose is prefered:
10 | 
11 | ```
12 | docker-compose up
13 | ```
14 | 
15 | Then go to 
16 | 
17 | http://localhost/
18 | 
19 | and you should see the PHP Info page, with OCI8 enabled
20 | 


--------------------------------------------------------------------------------
/conf/apache/000-default.conf:
--------------------------------------------------------------------------------
 1 | <VirtualHost *:80>
 2 | 	ServerAdmin webmaster@localhost
 3 | 	DocumentRoot /var/www/html/
 4 | 
 5 | 	<Directory "/var/www/html/">
 6 | 		AllowOverride all
 7 | 	</Directory>
 8 | 	
 9 | 	#ErrorLog ${APACHE_LOG_DIR}/error.log
10 | 	#CustomLog ${APACHE_LOG_DIR}/access.log combined
11 | <FilesMatch \.php$>
12 |     SetHandler application/x-httpd-php
13 | </FilesMatch>
14 | 
15 | </VirtualHost>
16 | 


--------------------------------------------------------------------------------
/conf/php/php.ini:
--------------------------------------------------------------------------------
   1 | [PHP]
   2 | 
   3 | ;;;;;;;;;;;;;;;;;;;
   4 | ; About php.ini   ;
   5 | ;;;;;;;;;;;;;;;;;;;
   6 | ; PHP's initialization file, generally called php.ini, is responsible for
   7 | ; configuring many of the aspects of PHP's behavior.
   8 | 
   9 | ; PHP attempts to find and load this configuration from a number of locations.
  10 | ; The following is a summary of its search order:
  11 | ; 1. SAPI module specific location.
  12 | ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
  13 | ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
  14 | ; 4. Current working directory (except CLI)
  15 | ; 5. The web server's directory (for SAPI modules), or directory of PHP
  16 | ; (otherwise in Windows)
  17 | ; 6. The directory from the --with-config-file-path compile time option, or the
  18 | ; Windows directory (C:\windows or C:\winnt)
  19 | ; See the PHP docs for more specific information.
  20 | ; http://php.net/configuration.file
  21 | 
  22 | ; The syntax of the file is extremely simple.  Whitespace and lines
  23 | ; beginning with a semicolon are silently ignored (as you probably guessed).
  24 | ; Section headers (e.g. [Foo]) are also silently ignored, even though
  25 | ; they might mean something in the future.
  26 | 
  27 | ; Directives following the section heading [PATH=/www/mysite] only
  28 | ; apply to PHP files in the /www/mysite directory.  Directives
  29 | ; following the section heading [HOST=www.example.com] only apply to
  30 | ; PHP files served from www.example.com.  Directives set in these
  31 | ; special sections cannot be overridden by user-defined INI files or
  32 | ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
  33 | ; CGI/FastCGI.
  34 | ; http://php.net/ini.sections
  35 | 
  36 | ; Directives are specified using the following syntax:
  37 | ; directive = value
  38 | ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
  39 | ; Directives are variables used to configure PHP or PHP extensions.
  40 | ; There is no name validation.  If PHP can't find an expected
  41 | ; directive because it is not set or is mistyped, a default value will be used.
  42 | 
  43 | ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
  44 | ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
  45 | ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
  46 | ; previously set variable or directive (e.g. ${foo})
  47 | 
  48 | ; Expressions in the INI file are limited to bitwise operators and parentheses:
  49 | ; |  bitwise OR
  50 | ; ^  bitwise XOR
  51 | ; &  bitwise AND
  52 | ; ~  bitwise NOT
  53 | ; !  boolean NOT
  54 | 
  55 | ; Boolean flags can be turned on using the values 1, On, True or Yes.
  56 | ; They can be turned off using the values 0, Off, False or No.
  57 | 
  58 | ; An empty string can be denoted by simply not writing anything after the equal
  59 | ; sign, or by using the None keyword:
  60 | 
  61 | ;  foo =         ; sets foo to an empty string
  62 | ;  foo = None    ; sets foo to an empty string
  63 | ;  foo = "None"  ; sets foo to the string 'None'
  64 | 
  65 | ; If you use constants in your value, and these constants belong to a
  66 | ; dynamically loaded extension (either a PHP extension or a Zend extension),
  67 | ; you may only use these constants *after* the line that loads the extension.
  68 | 
  69 | ;;;;;;;;;;;;;;;;;;;
  70 | ; About this file ;
  71 | ;;;;;;;;;;;;;;;;;;;
  72 | ; PHP comes packaged with two INI files. One that is recommended to be used
  73 | ; in production environments and one that is recommended to be used in
  74 | ; development environments.
  75 | 
  76 | ; php.ini-production contains settings which hold security, performance and
  77 | ; best practices at its core. But please be aware, these settings may break
  78 | ; compatibility with older or less security conscience applications. We
  79 | ; recommending using the production ini in production and testing environments.
  80 | 
  81 | ; php.ini-development is very similar to its production variant, except it is
  82 | ; much more verbose when it comes to errors. We recommend using the
  83 | ; development version only in development environments, as errors shown to
  84 | ; application users can inadvertently leak otherwise secure information.
  85 | 
  86 | ; This is php.ini-development INI file.
  87 | 
  88 | ;;;;;;;;;;;;;;;;;;;
  89 | ; Quick Reference ;
  90 | ;;;;;;;;;;;;;;;;;;;
  91 | ; The following are all the settings which are different in either the production
  92 | ; or development versions of the INIs with respect to PHP's default behavior.
  93 | ; Please see the actual settings later in the document for more details as to why
  94 | ; we recommend these changes in PHP's behavior.
  95 | 
  96 | ; display_errors
  97 | ;   Default Value: On
  98 | ;   Development Value: On
  99 | ;   Production Value: Off
 100 | 
 101 | ; display_startup_errors
 102 | ;   Default Value: Off
 103 | ;   Development Value: On
 104 | ;   Production Value: Off
 105 | 
 106 | ; error_reporting
 107 | ;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
 108 | ;   Development Value: E_ALL
 109 | ;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
 110 | 
 111 | ; html_errors
 112 | ;   Default Value: On
 113 | ;   Development Value: On
 114 | ;   Production value: On
 115 | 
 116 | ; log_errors
 117 | ;   Default Value: Off
 118 | ;   Development Value: On
 119 | ;   Production Value: On
 120 | 
 121 | ; max_input_time
 122 | ;   Default Value: -1 (Unlimited)
 123 | ;   Development Value: 60 (60 seconds)
 124 | ;   Production Value: 60 (60 seconds)
 125 | 
 126 | ; output_buffering
 127 | ;   Default Value: Off
 128 | ;   Development Value: 4096
 129 | ;   Production Value: 4096
 130 | 
 131 | ; register_argc_argv
 132 | ;   Default Value: On
 133 | ;   Development Value: Off
 134 | ;   Production Value: Off
 135 | 
 136 | ; request_order
 137 | ;   Default Value: None
 138 | ;   Development Value: "GP"
 139 | ;   Production Value: "GP"
 140 | 
 141 | ; session.gc_divisor
 142 | ;   Default Value: 100
 143 | ;   Development Value: 1000
 144 | ;   Production Value: 1000
 145 | 
 146 | ; session.hash_bits_per_character
 147 | ;   Default Value: 4
 148 | ;   Development Value: 5
 149 | ;   Production Value: 5
 150 | 
 151 | ; short_open_tag
 152 | ;   Default Value: On
 153 | ;   Development Value: Off
 154 | ;   Production Value: Off
 155 | 
 156 | ; track_errors
 157 | ;   Default Value: Off
 158 | ;   Development Value: On
 159 | ;   Production Value: Off
 160 | 
 161 | ; url_rewriter.tags
 162 | ;   Default Value: "a=href,area=href,frame=src,form=,fieldset="
 163 | ;   Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 164 | ;   Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 165 | 
 166 | ; variables_order
 167 | ;   Default Value: "EGPCS"
 168 | ;   Development Value: "GPCS"
 169 | ;   Production Value: "GPCS"
 170 | 
 171 | ;;;;;;;;;;;;;;;;;;;;
 172 | ; php.ini Options  ;
 173 | ;;;;;;;;;;;;;;;;;;;;
 174 | ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
 175 | ;user_ini.filename = ".user.ini"
 176 | 
 177 | ; To disable this feature set this option to empty value
 178 | ;user_ini.filename =
 179 | 
 180 | ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
 181 | ;user_ini.cache_ttl = 300
 182 | 
 183 | ;;;;;;;;;;;;;;;;;;;;
 184 | ; Language Options ;
 185 | ;;;;;;;;;;;;;;;;;;;;
 186 | 
 187 | ; Enable the PHP scripting language engine under Apache.
 188 | ; http://php.net/engine
 189 | engine = On
 190 | 
 191 | ; This directive determines whether or not PHP will recognize code between
 192 | ; <? and ?> tags as PHP source which should be processed as such. It is
 193 | ; generally recommended that <?php and ?> should be used and that this feature
 194 | ; should be disabled, as enabling it may result in issues when generating XML
 195 | ; documents, however this remains supported for backward compatibility reasons.
 196 | ; Note that this directive does not control the <?= shorthand tag, which can be
 197 | ; used regardless of this directive.
 198 | ; Default Value: On
 199 | ; Development Value: Off
 200 | ; Production Value: Off
 201 | ; http://php.net/short-open-tag
 202 | short_open_tag = Off
 203 | 
 204 | ; The number of significant digits displayed in floating point numbers.
 205 | ; http://php.net/precision
 206 | precision = 14
 207 | 
 208 | ; Output buffering is a mechanism for controlling how much output data
 209 | ; (excluding headers and cookies) PHP should keep internally before pushing that
 210 | ; data to the client. If your application's output exceeds this setting, PHP
 211 | ; will send that data in chunks of roughly the size you specify.
 212 | ; Turning on this setting and managing its maximum buffer size can yield some
 213 | ; interesting side-effects depending on your application and web server.
 214 | ; You may be able to send headers and cookies after you've already sent output
 215 | ; through print or echo. You also may see performance benefits if your server is
 216 | ; emitting less packets due to buffered output versus PHP streaming the output
 217 | ; as it gets it. On production servers, 4096 bytes is a good setting for performance
 218 | ; reasons.
 219 | ; Note: Output buffering can also be controlled via Output Buffering Control
 220 | ;   functions.
 221 | ; Possible Values:
 222 | ;   On = Enabled and buffer is unlimited. (Use with caution)
 223 | ;   Off = Disabled
 224 | ;   Integer = Enables the buffer and sets its maximum size in bytes.
 225 | ; Note: This directive is hardcoded to Off for the CLI SAPI
 226 | ; Default Value: Off
 227 | ; Development Value: 4096
 228 | ; Production Value: 4096
 229 | ; http://php.net/output-buffering
 230 | output_buffering = 4096
 231 | 
 232 | ; You can redirect all of the output of your scripts to a function.  For
 233 | ; example, if you set output_handler to "mb_output_handler", character
 234 | ; encoding will be transparently converted to the specified encoding.
 235 | ; Setting any output handler automatically turns on output buffering.
 236 | ; Note: People who wrote portable scripts should not depend on this ini
 237 | ;   directive. Instead, explicitly set the output handler using ob_start().
 238 | ;   Using this ini directive may cause problems unless you know what script
 239 | ;   is doing.
 240 | ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
 241 | ;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
 242 | ; Note: output_handler must be empty if this is set 'On' !!!!
 243 | ;   Instead you must use zlib.output_handler.
 244 | ; http://php.net/output-handler
 245 | ;output_handler =
 246 | 
 247 | ; Transparent output compression using the zlib library
 248 | ; Valid values for this option are 'off', 'on', or a specific buffer size
 249 | ; to be used for compression (default is 4KB)
 250 | ; Note: Resulting chunk size may vary due to nature of compression. PHP
 251 | ;   outputs chunks that are few hundreds bytes each as a result of
 252 | ;   compression. If you prefer a larger chunk size for better
 253 | ;   performance, enable output_buffering in addition.
 254 | ; Note: You need to use zlib.output_handler instead of the standard
 255 | ;   output_handler, or otherwise the output will be corrupted.
 256 | ; http://php.net/zlib.output-compression
 257 | zlib.output_compression = Off
 258 | 
 259 | ; http://php.net/zlib.output-compression-level
 260 | ;zlib.output_compression_level = -1
 261 | 
 262 | ; You cannot specify additional output handlers if zlib.output_compression
 263 | ; is activated here. This setting does the same as output_handler but in
 264 | ; a different order.
 265 | ; http://php.net/zlib.output-handler
 266 | ;zlib.output_handler =
 267 | 
 268 | ; Implicit flush tells PHP to tell the output layer to flush itself
 269 | ; automatically after every output block.  This is equivalent to calling the
 270 | ; PHP function flush() after each and every call to print() or echo() and each
 271 | ; and every HTML block.  Turning this option on has serious performance
 272 | ; implications and is generally recommended for debugging purposes only.
 273 | ; http://php.net/implicit-flush
 274 | ; Note: This directive is hardcoded to On for the CLI SAPI
 275 | implicit_flush = Off
 276 | 
 277 | ; The unserialize callback function will be called (with the undefined class'
 278 | ; name as parameter), if the unserializer finds an undefined class
 279 | ; which should be instantiated. A warning appears if the specified function is
 280 | ; not defined, or if the function doesn't include/implement the missing class.
 281 | ; So only set this entry, if you really want to implement such a
 282 | ; callback-function.
 283 | unserialize_callback_func =
 284 | 
 285 | ; When floats & doubles are serialized store serialize_precision significant
 286 | ; digits after the floating point. The default value ensures that when floats
 287 | ; are decoded with unserialize, the data will remain the same.
 288 | serialize_precision = 17
 289 | 
 290 | ; open_basedir, if set, limits all file operations to the defined directory
 291 | ; and below.  This directive makes most sense if used in a per-directory
 292 | ; or per-virtualhost web server configuration file.
 293 | ; http://php.net/open-basedir
 294 | ;open_basedir =
 295 | 
 296 | ; This directive allows you to disable certain functions for security reasons.
 297 | ; It receives a comma-delimited list of function names.
 298 | ; http://php.net/disable-functions
 299 | disable_functions =
 300 | 
 301 | ; This directive allows you to disable certain classes for security reasons.
 302 | ; It receives a comma-delimited list of class names.
 303 | ; http://php.net/disable-classes
 304 | disable_classes =
 305 | 
 306 | ; Colors for Syntax Highlighting mode.  Anything that's acceptable in
 307 | ; <span style="color: ???????"> would work.
 308 | ; http://php.net/syntax-highlighting
 309 | ;highlight.string  = #DD0000
 310 | ;highlight.comment = #FF9900
 311 | ;highlight.keyword = #007700
 312 | ;highlight.default = #0000BB
 313 | ;highlight.html    = #000000
 314 | 
 315 | ; If enabled, the request will be allowed to complete even if the user aborts
 316 | ; the request. Consider enabling it if executing long requests, which may end up
 317 | ; being interrupted by the user or a browser timing out. PHP's default behavior
 318 | ; is to disable this feature.
 319 | ; http://php.net/ignore-user-abort
 320 | ;ignore_user_abort = On
 321 | 
 322 | ; Determines the size of the realpath cache to be used by PHP. This value should
 323 | ; be increased on systems where PHP opens many files to reflect the quantity of
 324 | ; the file operations performed.
 325 | ; http://php.net/realpath-cache-size
 326 | ;realpath_cache_size = 16k
 327 | 
 328 | ; Duration of time, in seconds for which to cache realpath information for a given
 329 | ; file or directory. For systems with rarely changing files, consider increasing this
 330 | ; value.
 331 | ; http://php.net/realpath-cache-ttl
 332 | ;realpath_cache_ttl = 120
 333 | 
 334 | ; Enables or disables the circular reference collector.
 335 | ; http://php.net/zend.enable-gc
 336 | zend.enable_gc = On
 337 | 
 338 | ; If enabled, scripts may be written in encodings that are incompatible with
 339 | ; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such
 340 | ; encodings.  To use this feature, mbstring extension must be enabled.
 341 | ; Default: Off
 342 | ;zend.multibyte = Off
 343 | 
 344 | ; Allows to set the default encoding for the scripts.  This value will be used
 345 | ; unless "declare(encoding=...)" directive appears at the top of the script.
 346 | ; Only affects if zend.multibyte is set.
 347 | ; Default: ""
 348 | ;zend.script_encoding =
 349 | 
 350 | ;;;;;;;;;;;;;;;;;
 351 | ; Miscellaneous ;
 352 | ;;;;;;;;;;;;;;;;;
 353 | 
 354 | ; Decides whether PHP may expose the fact that it is installed on the server
 355 | ; (e.g. by adding its signature to the Web server header).  It is no security
 356 | ; threat in any way, but it makes it possible to determine whether you use PHP
 357 | ; on your server or not.
 358 | ; http://php.net/expose-php
 359 | expose_php = On
 360 | 
 361 | ;;;;;;;;;;;;;;;;;;;
 362 | ; Resource Limits ;
 363 | ;;;;;;;;;;;;;;;;;;;
 364 | 
 365 | ; Maximum execution time of each script, in seconds
 366 | ; http://php.net/max-execution-time
 367 | ; Note: This directive is hardcoded to 0 for the CLI SAPI
 368 | max_execution_time = 30
 369 | 
 370 | ; Maximum amount of time each script may spend parsing request data. It's a good
 371 | ; idea to limit this time on productions servers in order to eliminate unexpectedly
 372 | ; long running scripts.
 373 | ; Note: This directive is hardcoded to -1 for the CLI SAPI
 374 | ; Default Value: -1 (Unlimited)
 375 | ; Development Value: 60 (60 seconds)
 376 | ; Production Value: 60 (60 seconds)
 377 | ; http://php.net/max-input-time
 378 | max_input_time = 60
 379 | 
 380 | ; Maximum input variable nesting level
 381 | ; http://php.net/max-input-nesting-level
 382 | ;max_input_nesting_level = 64
 383 | 
 384 | ; How many GET/POST/COOKIE input variables may be accepted
 385 | ; max_input_vars = 1000
 386 | 
 387 | ; Maximum amount of memory a script may consume (128MB)
 388 | ; http://php.net/memory-limit
 389 | memory_limit = 128M
 390 | 
 391 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 392 | ; Error handling and logging ;
 393 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 394 | 
 395 | ; This directive informs PHP of which errors, warnings and notices you would like
 396 | ; it to take action for. The recommended way of setting values for this
 397 | ; directive is through the use of the error level constants and bitwise
 398 | ; operators. The error level constants are below here for convenience as well as
 399 | ; some common settings and their meanings.
 400 | ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
 401 | ; those related to E_NOTICE and E_STRICT, which together cover best practices and
 402 | ; recommended coding standards in PHP. For performance reasons, this is the
 403 | ; recommend error reporting setting. Your production server shouldn't be wasting
 404 | ; resources complaining about best practices and coding standards. That's what
 405 | ; development servers and development settings are for.
 406 | ; Note: The php.ini-development file has this setting as E_ALL. This
 407 | ; means it pretty much reports everything which is exactly what you want during
 408 | ; development and early testing.
 409 | ;
 410 | ; Error Level Constants:
 411 | ; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
 412 | ; E_ERROR           - fatal run-time errors
 413 | ; E_RECOVERABLE_ERROR  - almost fatal run-time errors
 414 | ; E_WARNING         - run-time warnings (non-fatal errors)
 415 | ; E_PARSE           - compile-time parse errors
 416 | ; E_NOTICE          - run-time notices (these are warnings which often result
 417 | ;                     from a bug in your code, but it's possible that it was
 418 | ;                     intentional (e.g., using an uninitialized variable and
 419 | ;                     relying on the fact it is automatically initialized to an
 420 | ;                     empty string)
 421 | ; E_STRICT          - run-time notices, enable to have PHP suggest changes
 422 | ;                     to your code which will ensure the best interoperability
 423 | ;                     and forward compatibility of your code
 424 | ; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
 425 | ; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
 426 | ;                     initial startup
 427 | ; E_COMPILE_ERROR   - fatal compile-time errors
 428 | ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
 429 | ; E_USER_ERROR      - user-generated error message
 430 | ; E_USER_WARNING    - user-generated warning message
 431 | ; E_USER_NOTICE     - user-generated notice message
 432 | ; E_DEPRECATED      - warn about code that will not work in future versions
 433 | ;                     of PHP
 434 | ; E_USER_DEPRECATED - user-generated deprecation warnings
 435 | ;
 436 | ; Common Values:
 437 | ;   E_ALL (Show all errors, warnings and notices including coding standards.)
 438 | ;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)
 439 | ;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)
 440 | ;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
 441 | ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
 442 | ; Development Value: E_ALL
 443 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
 444 | ; http://php.net/error-reporting
 445 | error_reporting = E_ALL
 446 | 
 447 | ; This directive controls whether or not and where PHP will output errors,
 448 | ; notices and warnings too. Error output is very useful during development, but
 449 | ; it could be very dangerous in production environments. Depending on the code
 450 | ; which is triggering the error, sensitive information could potentially leak
 451 | ; out of your application such as database usernames and passwords or worse.
 452 | ; For production environments, we recommend logging errors rather than
 453 | ; sending them to STDOUT.
 454 | ; Possible Values:
 455 | ;   Off = Do not display any errors
 456 | ;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
 457 | ;   On or stdout = Display errors to STDOUT
 458 | ; Default Value: On
 459 | ; Development Value: On
 460 | ; Production Value: Off
 461 | ; http://php.net/display-errors
 462 | display_errors = On
 463 | 
 464 | ; The display of errors which occur during PHP's startup sequence are handled
 465 | ; separately from display_errors. PHP's default behavior is to suppress those
 466 | ; errors from clients. Turning the display of startup errors on can be useful in
 467 | ; debugging configuration problems. We strongly recommend you
 468 | ; set this to 'off' for production servers.
 469 | ; Default Value: Off
 470 | ; Development Value: On
 471 | ; Production Value: Off
 472 | ; http://php.net/display-startup-errors
 473 | display_startup_errors = On
 474 | 
 475 | ; Besides displaying errors, PHP can also log errors to locations such as a
 476 | ; server-specific log, STDERR, or a location specified by the error_log
 477 | ; directive found below. While errors should not be displayed on productions
 478 | ; servers they should still be monitored and logging is a great way to do that.
 479 | ; Default Value: Off
 480 | ; Development Value: On
 481 | ; Production Value: On
 482 | ; http://php.net/log-errors
 483 | log_errors = On
 484 | 
 485 | ; Set maximum length of log_errors. In error_log information about the source is
 486 | ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
 487 | ; http://php.net/log-errors-max-len
 488 | log_errors_max_len = 1024
 489 | 
 490 | ; Do not log repeated messages. Repeated errors must occur in same file on same
 491 | ; line unless ignore_repeated_source is set true.
 492 | ; http://php.net/ignore-repeated-errors
 493 | ignore_repeated_errors = Off
 494 | 
 495 | ; Ignore source of message when ignoring repeated messages. When this setting
 496 | ; is On you will not log errors with repeated messages from different files or
 497 | ; source lines.
 498 | ; http://php.net/ignore-repeated-source
 499 | ignore_repeated_source = Off
 500 | 
 501 | ; If this parameter is set to Off, then memory leaks will not be shown (on
 502 | ; stdout or in the log). This has only effect in a debug compile, and if
 503 | ; error reporting includes E_WARNING in the allowed list
 504 | ; http://php.net/report-memleaks
 505 | report_memleaks = On
 506 | 
 507 | ; This setting is on by default.
 508 | ;report_zend_debug = 0
 509 | 
 510 | ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
 511 | ; to On can assist in debugging and is appropriate for development servers. It should
 512 | ; however be disabled on production servers.
 513 | ; Default Value: Off
 514 | ; Development Value: On
 515 | ; Production Value: Off
 516 | ; http://php.net/track-errors
 517 | track_errors = On
 518 | 
 519 | ; Turn off normal error reporting and emit XML-RPC error XML
 520 | ; http://php.net/xmlrpc-errors
 521 | ;xmlrpc_errors = 0
 522 | 
 523 | ; An XML-RPC faultCode
 524 | ;xmlrpc_error_number = 0
 525 | 
 526 | ; When PHP displays or logs an error, it has the capability of formatting the
 527 | ; error message as HTML for easier reading. This directive controls whether
 528 | ; the error message is formatted as HTML or not.
 529 | ; Note: This directive is hardcoded to Off for the CLI SAPI
 530 | ; Default Value: On
 531 | ; Development Value: On
 532 | ; Production value: On
 533 | ; http://php.net/html-errors
 534 | html_errors = On
 535 | 
 536 | ; If html_errors is set to On *and* docref_root is not empty, then PHP
 537 | ; produces clickable error messages that direct to a page describing the error
 538 | ; or function causing the error in detail.
 539 | ; You can download a copy of the PHP manual from http://php.net/docs
 540 | ; and change docref_root to the base URL of your local copy including the
 541 | ; leading '/'. You must also specify the file extension being used including
 542 | ; the dot. PHP's default behavior is to leave these settings empty, in which
 543 | ; case no links to documentation are generated.
 544 | ; Note: Never use this feature for production boxes.
 545 | ; http://php.net/docref-root
 546 | ; Examples
 547 | ;docref_root = "/phpmanual/"
 548 | 
 549 | ; http://php.net/docref-ext
 550 | ;docref_ext = .html
 551 | 
 552 | ; String to output before an error message. PHP's default behavior is to leave
 553 | ; this setting blank.
 554 | ; http://php.net/error-prepend-string
 555 | ; Example:
 556 | ;error_prepend_string = "<span style='color: #ff0000'>"
 557 | 
 558 | ; String to output after an error message. PHP's default behavior is to leave
 559 | ; this setting blank.
 560 | ; http://php.net/error-append-string
 561 | ; Example:
 562 | ;error_append_string = "</span>"
 563 | 
 564 | ; Log errors to specified file. PHP's default behavior is to leave this value
 565 | ; empty.
 566 | ; http://php.net/error-log
 567 | ; Example:
 568 | ;error_log = php_errors.log
 569 | ; Log errors to syslog (Event Log on Windows).
 570 | ;error_log = syslog
 571 | 
 572 | ;windows.show_crt_warning
 573 | ; Default value: 0
 574 | ; Development value: 0
 575 | ; Production value: 0
 576 | 
 577 | ;;;;;;;;;;;;;;;;;
 578 | ; Data Handling ;
 579 | ;;;;;;;;;;;;;;;;;
 580 | 
 581 | ; The separator used in PHP generated URLs to separate arguments.
 582 | ; PHP's default setting is "&".
 583 | ; http://php.net/arg-separator.output
 584 | ; Example:
 585 | ;arg_separator.output = "&amp;"
 586 | 
 587 | ; List of separator(s) used by PHP to parse input URLs into variables.
 588 | ; PHP's default setting is "&".
 589 | ; NOTE: Every character in this directive is considered as separator!
 590 | ; http://php.net/arg-separator.input
 591 | ; Example:
 592 | ;arg_separator.input = ";&"
 593 | 
 594 | ; This directive determines which super global arrays are registered when PHP
 595 | ; starts up. G,P,C,E & S are abbreviations for the following respective super
 596 | ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
 597 | ; paid for the registration of these arrays and because ENV is not as commonly
 598 | ; used as the others, ENV is not recommended on productions servers. You
 599 | ; can still get access to the environment variables through getenv() should you
 600 | ; need to.
 601 | ; Default Value: "EGPCS"
 602 | ; Development Value: "GPCS"
 603 | ; Production Value: "GPCS";
 604 | ; http://php.net/variables-order
 605 | variables_order = "GPCS"
 606 | 
 607 | ; This directive determines which super global data (G,P & C) should be
 608 | ; registered into the super global array REQUEST. If so, it also determines
 609 | ; the order in which that data is registered. The values for this directive
 610 | ; are specified in the same manner as the variables_order directive,
 611 | ; EXCEPT one. Leaving this value empty will cause PHP to use the value set
 612 | ; in the variables_order directive. It does not mean it will leave the super
 613 | ; globals array REQUEST empty.
 614 | ; Default Value: None
 615 | ; Development Value: "GP"
 616 | ; Production Value: "GP"
 617 | ; http://php.net/request-order
 618 | request_order = "GP"
 619 | 
 620 | ; This directive determines whether PHP registers $argv & $argc each time it
 621 | ; runs. $argv contains an array of all the arguments passed to PHP when a script
 622 | ; is invoked. $argc contains an integer representing the number of arguments
 623 | ; that were passed when the script was invoked. These arrays are extremely
 624 | ; useful when running scripts from the command line. When this directive is
 625 | ; enabled, registering these variables consumes CPU cycles and memory each time
 626 | ; a script is executed. For performance reasons, this feature should be disabled
 627 | ; on production servers.
 628 | ; Note: This directive is hardcoded to On for the CLI SAPI
 629 | ; Default Value: On
 630 | ; Development Value: Off
 631 | ; Production Value: Off
 632 | ; http://php.net/register-argc-argv
 633 | register_argc_argv = Off
 634 | 
 635 | ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
 636 | ; first used (Just In Time) instead of when the script starts. If these
 637 | ; variables are not used within a script, having this directive on will result
 638 | ; in a performance gain. The PHP directive register_argc_argv must be disabled
 639 | ; for this directive to have any affect.
 640 | ; http://php.net/auto-globals-jit
 641 | auto_globals_jit = On
 642 | 
 643 | ; Whether PHP will read the POST data.
 644 | ; This option is enabled by default.
 645 | ; Most likely, you won't want to disable this option globally. It causes $_POST
 646 | ; and $_FILES to always be empty; the only way you will be able to read the
 647 | ; POST data will be through the php://input stream wrapper. This can be useful
 648 | ; to proxy requests or to process the POST data in a memory efficient fashion.
 649 | ; http://php.net/enable-post-data-reading
 650 | ;enable_post_data_reading = Off
 651 | 
 652 | ; Maximum size of POST data that PHP will accept.
 653 | ; Its value may be 0 to disable the limit. It is ignored if POST data reading
 654 | ; is disabled through enable_post_data_reading.
 655 | ; http://php.net/post-max-size
 656 | post_max_size = 8M
 657 | 
 658 | ; Automatically add files before PHP document.
 659 | ; http://php.net/auto-prepend-file
 660 | auto_prepend_file =
 661 | 
 662 | ; Automatically add files after PHP document.
 663 | ; http://php.net/auto-append-file
 664 | auto_append_file =
 665 | 
 666 | ; By default, PHP will output a media type using the Content-Type header. To
 667 | ; disable this, simply set it to be empty.
 668 | ;
 669 | ; PHP's built-in default media type is set to text/html.
 670 | ; http://php.net/default-mimetype
 671 | default_mimetype = "text/html"
 672 | 
 673 | ; PHP's default character set is set to UTF-8.
 674 | ; http://php.net/default-charset
 675 | default_charset = "UTF-8"
 676 | 
 677 | ; PHP internal character encoding is set to empty.
 678 | ; If empty, default_charset is used.
 679 | ; http://php.net/internal-encoding
 680 | ;internal_encoding =
 681 | 
 682 | ; PHP input character encoding is set to empty.
 683 | ; If empty, default_charset is used.
 684 | ; http://php.net/input-encoding
 685 | ;input_encoding =
 686 | 
 687 | ; PHP output character encoding is set to empty.
 688 | ; If empty, default_charset is used.
 689 | ; mbstring or iconv output handler is used.
 690 | ; See also output_buffer.
 691 | ; http://php.net/output-encoding
 692 | ;output_encoding =
 693 | 
 694 | ;;;;;;;;;;;;;;;;;;;;;;;;;
 695 | ; Paths and Directories ;
 696 | ;;;;;;;;;;;;;;;;;;;;;;;;;
 697 | 
 698 | ; UNIX: "/path1:/path2"
 699 | ;include_path = ".:/php/includes"
 700 | ;
 701 | ; Windows: "\path1;\path2"
 702 | ;include_path = ".;c:\php\includes"
 703 | ;
 704 | ; PHP's default setting for include_path is ".;/path/to/php/pear"
 705 | ; http://php.net/include-path
 706 | 
 707 | ; The root of the PHP pages, used only if nonempty.
 708 | ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
 709 | ; if you are running php as a CGI under any web server (other than IIS)
 710 | ; see documentation for security issues.  The alternate is to use the
 711 | ; cgi.force_redirect configuration below
 712 | ; http://php.net/doc-root
 713 | doc_root =
 714 | 
 715 | ; The directory under which PHP opens the script using /~username used only
 716 | ; if nonempty.
 717 | ; http://php.net/user-dir
 718 | user_dir =
 719 | 
 720 | ; Directory in which the loadable extensions (modules) reside.
 721 | ; http://php.net/extension-dir
 722 | ; extension_dir = "./"
 723 | ; On windows:
 724 | ; extension_dir = "ext"
 725 | 
 726 | ; Directory where the temporary files should be placed.
 727 | ; Defaults to the system default (see sys_get_temp_dir)
 728 | ; sys_temp_dir = "/tmp"
 729 | 
 730 | ; Whether or not to enable the dl() function.  The dl() function does NOT work
 731 | ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
 732 | ; disabled on them.
 733 | ; http://php.net/enable-dl
 734 | enable_dl = Off
 735 | 
 736 | ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
 737 | ; most web servers.  Left undefined, PHP turns this on by default.  You can
 738 | ; turn it off here AT YOUR OWN RISK
 739 | ; **You CAN safely turn this off for IIS, in fact, you MUST.**
 740 | ; http://php.net/cgi.force-redirect
 741 | ;cgi.force_redirect = 1
 742 | 
 743 | ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
 744 | ; every request. PHP's default behavior is to disable this feature.
 745 | ;cgi.nph = 1
 746 | 
 747 | ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
 748 | ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
 749 | ; will look for to know it is OK to continue execution.  Setting this variable MAY
 750 | ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
 751 | ; http://php.net/cgi.redirect-status-env
 752 | ;cgi.redirect_status_env =
 753 | 
 754 | ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
 755 | ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
 756 | ; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
 757 | ; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
 758 | ; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
 759 | ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
 760 | ; http://php.net/cgi.fix-pathinfo
 761 | ;cgi.fix_pathinfo=1
 762 | 
 763 | ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
 764 | ; security tokens of the calling client.  This allows IIS to define the
 765 | ; security context that the request runs under.  mod_fastcgi under Apache
 766 | ; does not currently support this feature (03/17/2002)
 767 | ; Set to 1 if running under IIS.  Default is zero.
 768 | ; http://php.net/fastcgi.impersonate
 769 | ;fastcgi.impersonate = 1
 770 | 
 771 | ; Disable logging through FastCGI connection. PHP's default behavior is to enable
 772 | ; this feature.
 773 | ;fastcgi.logging = 0
 774 | 
 775 | ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
 776 | ; use when sending HTTP response code. If set to 0, PHP sends Status: header that
 777 | ; is supported by Apache. When this option is set to 1, PHP will send
 778 | ; RFC2616 compliant header.
 779 | ; Default is zero.
 780 | ; http://php.net/cgi.rfc2616-headers
 781 | ;cgi.rfc2616_headers = 0
 782 | 
 783 | ;;;;;;;;;;;;;;;;
 784 | ; File Uploads ;
 785 | ;;;;;;;;;;;;;;;;
 786 | 
 787 | ; Whether to allow HTTP file uploads.
 788 | ; http://php.net/file-uploads
 789 | file_uploads = On
 790 | 
 791 | ; Temporary directory for HTTP uploaded files (will use system default if not
 792 | ; specified).
 793 | ; http://php.net/upload-tmp-dir
 794 | ;upload_tmp_dir =
 795 | 
 796 | ; Maximum allowed size for uploaded files.
 797 | ; http://php.net/upload-max-filesize
 798 | upload_max_filesize = 2M
 799 | 
 800 | ; Maximum number of files that can be uploaded via a single request
 801 | max_file_uploads = 20
 802 | 
 803 | ;;;;;;;;;;;;;;;;;;
 804 | ; Fopen wrappers ;
 805 | ;;;;;;;;;;;;;;;;;;
 806 | 
 807 | ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
 808 | ; http://php.net/allow-url-fopen
 809 | allow_url_fopen = On
 810 | 
 811 | ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
 812 | ; http://php.net/allow-url-include
 813 | allow_url_include = Off
 814 | 
 815 | ; Define the anonymous ftp password (your email address). PHP's default setting
 816 | ; for this is empty.
 817 | ; http://php.net/from
 818 | ;from="john@doe.com"
 819 | 
 820 | ; Define the User-Agent string. PHP's default setting for this is empty.
 821 | ; http://php.net/user-agent
 822 | ;user_agent="PHP"
 823 | 
 824 | ; Default timeout for socket based streams (seconds)
 825 | ; http://php.net/default-socket-timeout
 826 | default_socket_timeout = 60
 827 | 
 828 | ; If your scripts have to deal with files from Macintosh systems,
 829 | ; or you are running on a Mac and need to deal with files from
 830 | ; unix or win32 systems, setting this flag will cause PHP to
 831 | ; automatically detect the EOL character in those files so that
 832 | ; fgets() and file() will work regardless of the source of the file.
 833 | ; http://php.net/auto-detect-line-endings
 834 | ;auto_detect_line_endings = Off
 835 | 
 836 | ;;;;;;;;;;;;;;;;;;;;;;
 837 | ; Dynamic Extensions ;
 838 | ;;;;;;;;;;;;;;;;;;;;;;
 839 | 
 840 | ; If you wish to have an extension loaded automatically, use the following
 841 | ; syntax:
 842 | ;
 843 | ;   extension=modulename.extension
 844 | ;
 845 | ; For example, on Windows:
 846 | ;
 847 | ;   extension=msql.dll
 848 | ;
 849 | ; ... or under UNIX:
 850 | ;
 851 | ;   extension=msql.so
 852 | ;
 853 | ; ... or with a path:
 854 | ;
 855 | ;   extension=/path/to/extension/msql.so
 856 | ;
 857 | ; If you only provide the name of the extension, PHP will look for it in its
 858 | ; default extension directory.
 859 | ;
 860 | ; Windows Extensions
 861 | ; Note that ODBC support is built in, so no dll is needed for it.
 862 | ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5+)
 863 | ; extension folders as well as the separate PECL DLL download (PHP 5+).
 864 | ; Be sure to appropriately set the extension_dir directive.
 865 | ;
 866 | ;extension=php_bz2.dll
 867 | ;extension=php_curl.dll
 868 | ;extension=php_fileinfo.dll
 869 | ;extension=php_gd2.dll
 870 | ;extension=php_gettext.dll
 871 | ;extension=php_gmp.dll
 872 | ;extension=php_intl.dll
 873 | ;extension=php_imap.dll
 874 | ;extension=php_interbase.dll
 875 | ;extension=php_ldap.dll
 876 | ;extension=php_mbstring.so
 877 | ;extension=mbstring.so
 878 | ;extension=mcrypt.so
 879 | 
 880 | ;extension=php_exif.dll      ; Must be after mbstring as it depends on it
 881 | ;extension=php_mysqli.so
 882 | ;extension=php_oci8_12c.dll  ; Use with Oracle Database 12c Instant Client
 883 | ;extension=php_openssl.dll
 884 | ;extension=php_pdo_firebird.dll
 885 | ;extension=pdo_mysql.so
 886 | extension=oci8.so
 887 | ;extension=php_pdo_oci.dll
 888 | ;extension=php_pdo_odbc.dll
 889 | ;extension=php_pdo_pgsql.dll
 890 | ;extension=php_pdo_sqlite.dll
 891 | #extension=php_pgsql.so
 892 | ;extension=php_shmop.dll
 893 | 
 894 | ; The MIBS data available in the PHP distribution must be installed.
 895 | ; See http://www.php.net/manual/en/snmp.installation.php
 896 | ;extension=php_snmp.dll
 897 | 
 898 | ;extension=php_soap.dll
 899 | ;extension=php_sockets.dll
 900 | ;extension=php_sqlite3.dll
 901 | ;extension=php_tidy.dll
 902 | ;extension=php_xmlrpc.dll
 903 | ;extension=php_xsl.dll
 904 | 
 905 | ;;;;;;;;;;;;;;;;;;;
 906 | ; Module Settings ;
 907 | ;;;;;;;;;;;;;;;;;;;
 908 | 
 909 | [CLI Server]
 910 | ; Whether the CLI web server uses ANSI color coding in its terminal output.
 911 | cli_server.color = On
 912 | 
 913 | [Date]
 914 | ; Defines the default timezone used by the date functions
 915 | ; http://php.net/date.timezone
 916 | ;date.timezone =
 917 | 
 918 | ; http://php.net/date.default-latitude
 919 | ;date.default_latitude = 31.7667
 920 | 
 921 | ; http://php.net/date.default-longitude
 922 | ;date.default_longitude = 35.2333
 923 | 
 924 | ; http://php.net/date.sunrise-zenith
 925 | ;date.sunrise_zenith = 90.583333
 926 | 
 927 | ; http://php.net/date.sunset-zenith
 928 | ;date.sunset_zenith = 90.583333
 929 | 
 930 | [filter]
 931 | ; http://php.net/filter.default
 932 | ;filter.default = unsafe_raw
 933 | 
 934 | ; http://php.net/filter.default-flags
 935 | ;filter.default_flags =
 936 | 
 937 | [iconv]
 938 | ; Use of this INI entry is deprecated, use global input_encoding instead.
 939 | ; If empty, default_charset or input_encoding or iconv.input_encoding is used.
 940 | ; The precedence is: default_charset < intput_encoding < iconv.input_encoding
 941 | ;iconv.input_encoding =
 942 | 
 943 | ; Use of this INI entry is deprecated, use global internal_encoding instead.
 944 | ; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
 945 | ; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
 946 | ;iconv.internal_encoding =
 947 | 
 948 | ; Use of this INI entry is deprecated, use global output_encoding instead.
 949 | ; If empty, default_charset or output_encoding or iconv.output_encoding is used.
 950 | ; The precedence is: default_charset < output_encoding < iconv.output_encoding
 951 | ; To use an output encoding conversion, iconv's output handler must be set
 952 | ; otherwise output encoding conversion cannot be performed.
 953 | ;iconv.output_encoding =
 954 | 
 955 | [intl]
 956 | ;intl.default_locale =
 957 | ; This directive allows you to produce PHP errors when some error
 958 | ; happens within intl functions. The value is the level of the error produced.
 959 | ; Default is 0, which does not produce any errors.
 960 | ;intl.error_level = E_WARNING
 961 | 
 962 | [sqlite3]
 963 | ;sqlite3.extension_dir =
 964 | 
 965 | [Pcre]
 966 | ;PCRE library backtracking limit.
 967 | ; http://php.net/pcre.backtrack-limit
 968 | ;pcre.backtrack_limit=100000
 969 | 
 970 | ;PCRE library recursion limit.
 971 | ;Please note that if you set this value to a high number you may consume all
 972 | ;the available process stack and eventually crash PHP (due to reaching the
 973 | ;stack size limit imposed by the Operating System).
 974 | ; http://php.net/pcre.recursion-limit
 975 | ;pcre.recursion_limit=100000
 976 | 
 977 | ;Enables or disables JIT compilation of patterns. This requires the PCRE
 978 | ;library to be compiled with JIT support.
 979 | ;pcre.jit=1
 980 | 
 981 | [Pdo]
 982 | ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
 983 | ; http://php.net/pdo-odbc.connection-pooling
 984 | ;pdo_odbc.connection_pooling=strict
 985 | 
 986 | ;pdo_odbc.db2_instance_name
 987 | 
 988 | [Pdo_mysql]
 989 | ; If mysqlnd is used: Number of cache slots for the internal result set cache
 990 | ; http://php.net/pdo_mysql.cache_size
 991 | pdo_mysql.cache_size = 2000
 992 | 
 993 | ; Default socket name for local MySQL connects.  If empty, uses the built-in
 994 | ; MySQL defaults.
 995 | ; http://php.net/pdo_mysql.default-socket
 996 | pdo_mysql.default_socket=
 997 | 
 998 | [Phar]
 999 | ; http://php.net/phar.readonly
1000 | ;phar.readonly = On
1001 | 
1002 | ; http://php.net/phar.require-hash
1003 | ;phar.require_hash = On
1004 | 
1005 | ;phar.cache_list =
1006 | 
1007 | [mail function]
1008 | ; For Win32 only.
1009 | ; http://php.net/smtp
1010 | SMTP = localhost
1011 | ; http://php.net/smtp-port
1012 | smtp_port = 25
1013 | 
1014 | ; For Win32 only.
1015 | ; http://php.net/sendmail-from
1016 | ;sendmail_from = me@example.com
1017 | 
1018 | ; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
1019 | ; http://php.net/sendmail-path
1020 | ;sendmail_path =
1021 | 
1022 | ; Force the addition of the specified parameters to be passed as extra parameters
1023 | ; to the sendmail binary. These parameters will always replace the value of
1024 | ; the 5th parameter to mail().
1025 | ;mail.force_extra_parameters =
1026 | 
1027 | ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
1028 | mail.add_x_header = On
1029 | 
1030 | ; The path to a log file that will log all mail() calls. Log entries include
1031 | ; the full path of the script, line number, To address and headers.
1032 | ;mail.log =
1033 | ; Log mail to syslog (Event Log on Windows).
1034 | ;mail.log = syslog
1035 | 
1036 | [SQL]
1037 | ; http://php.net/sql.safe-mode
1038 | sql.safe_mode = Off
1039 | 
1040 | [ODBC]
1041 | ; http://php.net/odbc.default-db
1042 | ;odbc.default_db    =  Not yet implemented
1043 | 
1044 | ; http://php.net/odbc.default-user
1045 | ;odbc.default_user  =  Not yet implemented
1046 | 
1047 | ; http://php.net/odbc.default-pw
1048 | ;odbc.default_pw    =  Not yet implemented
1049 | 
1050 | ; Controls the ODBC cursor model.
1051 | ; Default: SQL_CURSOR_STATIC (default).
1052 | ;odbc.default_cursortype
1053 | 
1054 | ; Allow or prevent persistent links.
1055 | ; http://php.net/odbc.allow-persistent
1056 | odbc.allow_persistent = On
1057 | 
1058 | ; Check that a connection is still valid before reuse.
1059 | ; http://php.net/odbc.check-persistent
1060 | odbc.check_persistent = On
1061 | 
1062 | ; Maximum number of persistent links.  -1 means no limit.
1063 | ; http://php.net/odbc.max-persistent
1064 | odbc.max_persistent = -1
1065 | 
1066 | ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
1067 | ; http://php.net/odbc.max-links
1068 | odbc.max_links = -1
1069 | 
1070 | ; Handling of LONG fields.  Returns number of bytes to variables.  0 means
1071 | ; passthru.
1072 | ; http://php.net/odbc.defaultlrl
1073 | odbc.defaultlrl = 4096
1074 | 
1075 | ; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
1076 | ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
1077 | ; of odbc.defaultlrl and odbc.defaultbinmode
1078 | ; http://php.net/odbc.defaultbinmode
1079 | odbc.defaultbinmode = 1
1080 | 
1081 | ;birdstep.max_links = -1
1082 | 
1083 | [Interbase]
1084 | ; Allow or prevent persistent links.
1085 | ibase.allow_persistent = 1
1086 | 
1087 | ; Maximum number of persistent links.  -1 means no limit.
1088 | ibase.max_persistent = -1
1089 | 
1090 | ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
1091 | ibase.max_links = -1
1092 | 
1093 | ; Default database name for ibase_connect().
1094 | ;ibase.default_db =
1095 | 
1096 | ; Default username for ibase_connect().
1097 | ;ibase.default_user =
1098 | 
1099 | ; Default password for ibase_connect().
1100 | ;ibase.default_password =
1101 | 
1102 | ; Default charset for ibase_connect().
1103 | ;ibase.default_charset =
1104 | 
1105 | ; Default timestamp format.
1106 | ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
1107 | 
1108 | ; Default date format.
1109 | ibase.dateformat = "%Y-%m-%d"
1110 | 
1111 | ; Default time format.
1112 | ibase.timeformat = "%H:%M:%S"
1113 | 
1114 | [MySQLi]
1115 | 
1116 | ; Maximum number of persistent links.  -1 means no limit.
1117 | ; http://php.net/mysqli.max-persistent
1118 | mysqli.max_persistent = -1
1119 | 
1120 | ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
1121 | ; http://php.net/mysqli.allow_local_infile
1122 | ;mysqli.allow_local_infile = On
1123 | 
1124 | ; Allow or prevent persistent links.
1125 | ; http://php.net/mysqli.allow-persistent
1126 | mysqli.allow_persistent = On
1127 | 
1128 | ; Maximum number of links.  -1 means no limit.
1129 | ; http://php.net/mysqli.max-links
1130 | mysqli.max_links = -1
1131 | 
1132 | ; If mysqlnd is used: Number of cache slots for the internal result set cache
1133 | ; http://php.net/mysqli.cache_size
1134 | mysqli.cache_size = 2000
1135 | 
1136 | ; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
1137 | ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
1138 | ; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
1139 | ; at MYSQL_PORT.
1140 | ; http://php.net/mysqli.default-port
1141 | mysqli.default_port = 3306
1142 | 
1143 | ; Default socket name for local MySQL connects.  If empty, uses the built-in
1144 | ; MySQL defaults.
1145 | ; http://php.net/mysqli.default-socket
1146 | mysqli.default_socket =
1147 | 
1148 | ; Default host for mysql_connect() (doesn't apply in safe mode).
1149 | ; http://php.net/mysqli.default-host
1150 | mysqli.default_host =
1151 | 
1152 | ; Default user for mysql_connect() (doesn't apply in safe mode).
1153 | ; http://php.net/mysqli.default-user
1154 | mysqli.default_user =
1155 | 
1156 | ; Default password for mysqli_connect() (doesn't apply in safe mode).
1157 | ; Note that this is generally a *bad* idea to store passwords in this file.
1158 | ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
1159 | ; and reveal this password!  And of course, any users with read access to this
1160 | ; file will be able to reveal the password as well.
1161 | ; http://php.net/mysqli.default-pw
1162 | mysqli.default_pw =
1163 | 
1164 | ; Allow or prevent reconnect
1165 | mysqli.reconnect = Off
1166 | 
1167 | [mysqlnd]
1168 | ; Enable / Disable collection of general statistics by mysqlnd which can be
1169 | ; used to tune and monitor MySQL operations.
1170 | ; http://php.net/mysqlnd.collect_statistics
1171 | mysqlnd.collect_statistics = On
1172 | 
1173 | ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
1174 | ; used to tune and monitor MySQL operations.
1175 | ; http://php.net/mysqlnd.collect_memory_statistics
1176 | mysqlnd.collect_memory_statistics = On
1177 | 
1178 | ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
1179 | ; http://php.net/mysqlnd.net_cmd_buffer_size
1180 | ;mysqlnd.net_cmd_buffer_size = 2048
1181 | 
1182 | ; Size of a pre-allocated buffer used for reading data sent by the server in
1183 | ; bytes.
1184 | ; http://php.net/mysqlnd.net_read_buffer_size
1185 | ;mysqlnd.net_read_buffer_size = 32768
1186 | 
1187 | [OCI8]
1188 | 
1189 | ; Connection: Enables privileged connections using external
1190 | ; credentials (OCI_SYSOPER, OCI_SYSDBA)
1191 | ; http://php.net/oci8.privileged-connect
1192 | ;oci8.privileged_connect = Off
1193 | 
1194 | ; Connection: The maximum number of persistent OCI8 connections per
1195 | ; process. Using -1 means no limit.
1196 | ; http://php.net/oci8.max-persistent
1197 | ;oci8.max_persistent = -1
1198 | 
1199 | ; Connection: The maximum number of seconds a process is allowed to
1200 | ; maintain an idle persistent connection. Using -1 means idle
1201 | ; persistent connections will be maintained forever.
1202 | ; http://php.net/oci8.persistent-timeout
1203 | ;oci8.persistent_timeout = -1
1204 | 
1205 | ; Connection: The number of seconds that must pass before issuing a
1206 | ; ping during oci_pconnect() to check the connection validity. When
1207 | ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
1208 | ; pings completely.
1209 | ; http://php.net/oci8.ping-interval
1210 | ;oci8.ping_interval = 60
1211 | 
1212 | ; Connection: Set this to a user chosen connection class to be used
1213 | ; for all pooled server requests with Oracle 11g Database Resident
1214 | ; Connection Pooling (DRCP).  To use DRCP, this value should be set to
1215 | ; the same string for all web servers running the same application,
1216 | ; the database pool must be configured, and the connection string must
1217 | ; specify to use a pooled server.
1218 | ;oci8.connection_class =
1219 | 
1220 | ; High Availability: Using On lets PHP receive Fast Application
1221 | ; Notification (FAN) events generated when a database node fails. The
1222 | ; database must also be configured to post FAN events.
1223 | ;oci8.events = Off
1224 | 
1225 | ; Tuning: This option enables statement caching, and specifies how
1226 | ; many statements to cache. Using 0 disables statement caching.
1227 | ; http://php.net/oci8.statement-cache-size
1228 | ;oci8.statement_cache_size = 20
1229 | 
1230 | ; Tuning: Enables statement prefetching and sets the default number of
1231 | ; rows that will be fetched automatically after statement execution.
1232 | ; http://php.net/oci8.default-prefetch
1233 | ;oci8.default_prefetch = 100
1234 | 
1235 | ; Compatibility. Using On means oci_close() will not close
1236 | ; oci_connect() and oci_new_connect() connections.
1237 | ; http://php.net/oci8.old-oci-close-semantics
1238 | ;oci8.old_oci_close_semantics = Off
1239 | 
1240 | [PostgreSQL]
1241 | ; Allow or prevent persistent links.
1242 | ; http://php.net/pgsql.allow-persistent
1243 | pgsql.allow_persistent = On
1244 | 
1245 | ; Detect broken persistent links always with pg_pconnect().
1246 | ; Auto reset feature requires a little overheads.
1247 | ; http://php.net/pgsql.auto-reset-persistent
1248 | pgsql.auto_reset_persistent = Off
1249 | 
1250 | ; Maximum number of persistent links.  -1 means no limit.
1251 | ; http://php.net/pgsql.max-persistent
1252 | pgsql.max_persistent = -1
1253 | 
1254 | ; Maximum number of links (persistent+non persistent).  -1 means no limit.
1255 | ; http://php.net/pgsql.max-links
1256 | pgsql.max_links = -1
1257 | 
1258 | ; Ignore PostgreSQL backends Notice message or not.
1259 | ; Notice message logging require a little overheads.
1260 | ; http://php.net/pgsql.ignore-notice
1261 | pgsql.ignore_notice = 0
1262 | 
1263 | ; Log PostgreSQL backends Notice message or not.
1264 | ; Unless pgsql.ignore_notice=0, module cannot log notice message.
1265 | ; http://php.net/pgsql.log-notice
1266 | pgsql.log_notice = 0
1267 | 
1268 | [bcmath]
1269 | ; Number of decimal digits for all bcmath functions.
1270 | ; http://php.net/bcmath.scale
1271 | bcmath.scale = 0
1272 | 
1273 | [browscap]
1274 | ; http://php.net/browscap
1275 | ;browscap = extra/browscap.ini
1276 | 
1277 | [Session]
1278 | ; Handler used to store/retrieve data.
1279 | ; http://php.net/session.save-handler
1280 | session.save_handler = files
1281 | 
1282 | ; Argument passed to save_handler.  In the case of files, this is the path
1283 | ; where data files are stored. Note: Windows users have to change this
1284 | ; variable in order to use PHP's session functions.
1285 | ;
1286 | ; The path can be defined as:
1287 | ;
1288 | ;     session.save_path = "N;/path"
1289 | ;
1290 | ; where N is an integer.  Instead of storing all the session files in
1291 | ; /path, what this will do is use subdirectories N-levels deep, and
1292 | ; store the session data in those directories.  This is useful if
1293 | ; your OS has problems with many files in one directory, and is
1294 | ; a more efficient layout for servers that handle many sessions.
1295 | ;
1296 | ; NOTE 1: PHP will not create this directory structure automatically.
1297 | ;         You can use the script in the ext/session dir for that purpose.
1298 | ; NOTE 2: See the section on garbage collection below if you choose to
1299 | ;         use subdirectories for session storage
1300 | ;
1301 | ; The file storage module creates files using mode 600 by default.
1302 | ; You can change that by using
1303 | ;
1304 | ;     session.save_path = "N;MODE;/path"
1305 | ;
1306 | ; where MODE is the octal representation of the mode. Note that this
1307 | ; does not overwrite the process's umask.
1308 | ; http://php.net/session.save-path
1309 | ;session.save_path = "/tmp"
1310 | 
1311 | ; Whether to use strict session mode.
1312 | ; Strict session mode does not accept uninitialized session ID and regenerate
1313 | ; session ID if browser sends uninitialized session ID. Strict mode protects
1314 | ; applications from session fixation via session adoption vulnerability. It is
1315 | ; disabled by default for maximum compatibility, but enabling it is encouraged.
1316 | ; https://wiki.php.net/rfc/strict_sessions
1317 | session.use_strict_mode = 0
1318 | 
1319 | ; Whether to use cookies.
1320 | ; http://php.net/session.use-cookies
1321 | session.use_cookies = 1
1322 | 
1323 | ; http://php.net/session.cookie-secure
1324 | ;session.cookie_secure =
1325 | 
1326 | ; This option forces PHP to fetch and use a cookie for storing and maintaining
1327 | ; the session id. We encourage this operation as it's very helpful in combating
1328 | ; session hijacking when not specifying and managing your own session id. It is
1329 | ; not the be-all and end-all of session hijacking defense, but it's a good start.
1330 | ; http://php.net/session.use-only-cookies
1331 | session.use_only_cookies = 1
1332 | 
1333 | ; Name of the session (used as cookie name).
1334 | ; http://php.net/session.name
1335 | session.name = PHPSESSID
1336 | 
1337 | ; Initialize session on request startup.
1338 | ; http://php.net/session.auto-start
1339 | session.auto_start = 0
1340 | 
1341 | ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
1342 | ; http://php.net/session.cookie-lifetime
1343 | session.cookie_lifetime = 0
1344 | 
1345 | ; The path for which the cookie is valid.
1346 | ; http://php.net/session.cookie-path
1347 | session.cookie_path = /
1348 | 
1349 | ; The domain for which the cookie is valid.
1350 | ; http://php.net/session.cookie-domain
1351 | session.cookie_domain =
1352 | 
1353 | ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
1354 | ; http://php.net/session.cookie-httponly
1355 | session.cookie_httponly =
1356 | 
1357 | ; Handler used to serialize data.  php is the standard serializer of PHP.
1358 | ; http://php.net/session.serialize-handler
1359 | session.serialize_handler = php
1360 | 
1361 | ; Defines the probability that the 'garbage collection' process is started
1362 | ; on every session initialization. The probability is calculated by using
1363 | ; gc_probability/gc_divisor. Where session.gc_probability is the numerator
1364 | ; and gc_divisor is the denominator in the equation. Setting this value to 1
1365 | ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
1366 | ; the gc will run on any give request.
1367 | ; Default Value: 1
1368 | ; Development Value: 1
1369 | ; Production Value: 1
1370 | ; http://php.net/session.gc-probability
1371 | session.gc_probability = 1
1372 | 
1373 | ; Defines the probability that the 'garbage collection' process is started on every
1374 | ; session initialization. The probability is calculated by using the following equation:
1375 | ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
1376 | ; session.gc_divisor is the denominator in the equation. Setting this value to 1
1377 | ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
1378 | ; the gc will run on any give request. Increasing this value to 1000 will give you
1379 | ; a 0.1% chance the gc will run on any give request. For high volume production servers,
1380 | ; this is a more efficient approach.
1381 | ; Default Value: 100
1382 | ; Development Value: 1000
1383 | ; Production Value: 1000
1384 | ; http://php.net/session.gc-divisor
1385 | session.gc_divisor = 1000
1386 | 
1387 | ; After this number of seconds, stored data will be seen as 'garbage' and
1388 | ; cleaned up by the garbage collection process.
1389 | ; http://php.net/session.gc-maxlifetime
1390 | session.gc_maxlifetime = 1440
1391 | 
1392 | ; NOTE: If you are using the subdirectory option for storing session files
1393 | ;       (see session.save_path above), then garbage collection does *not*
1394 | ;       happen automatically.  You will need to do your own garbage
1395 | ;       collection through a shell script, cron entry, or some other method.
1396 | ;       For example, the following script would is the equivalent of
1397 | ;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
1398 | ;          find /path/to/sessions -cmin +24 -type f | xargs rm
1399 | 
1400 | ; Check HTTP Referer to invalidate externally stored URLs containing ids.
1401 | ; HTTP_REFERER has to contain this substring for the session to be
1402 | ; considered as valid.
1403 | ; http://php.net/session.referer-check
1404 | session.referer_check =
1405 | 
1406 | ; How many bytes to read from the file.
1407 | ; http://php.net/session.entropy-length
1408 | ;session.entropy_length = 32
1409 | 
1410 | ; Specified here to create the session id.
1411 | ; http://php.net/session.entropy-file
1412 | ; Defaults to /dev/urandom
1413 | ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
1414 | ; If neither are found at compile time, the default is no entropy file.
1415 | ; On windows, setting the entropy_length setting will activate the
1416 | ; Windows random source (using the CryptoAPI)
1417 | ;session.entropy_file = /dev/urandom
1418 | 
1419 | ; Set to {nocache,private,public,} to determine HTTP caching aspects
1420 | ; or leave this empty to avoid sending anti-caching headers.
1421 | ; http://php.net/session.cache-limiter
1422 | session.cache_limiter = nocache
1423 | 
1424 | ; Document expires after n minutes.
1425 | ; http://php.net/session.cache-expire
1426 | session.cache_expire = 180
1427 | 
1428 | ; trans sid support is disabled by default.
1429 | ; Use of trans sid may risk your users' security.
1430 | ; Use this option with caution.
1431 | ; - User may send URL contains active session ID
1432 | ;   to other person via. email/irc/etc.
1433 | ; - URL that contains active session ID may be stored
1434 | ;   in publicly accessible computer.
1435 | ; - User may access your site with the same session ID
1436 | ;   always using URL stored in browser's history or bookmarks.
1437 | ; http://php.net/session.use-trans-sid
1438 | session.use_trans_sid = 0
1439 | 
1440 | ; Select a hash function for use in generating session ids.
1441 | ; Possible Values
1442 | ;   0  (MD5 128 bits)
1443 | ;   1  (SHA-1 160 bits)
1444 | ; This option may also be set to the name of any hash function supported by
1445 | ; the hash extension. A list of available hashes is returned by the hash_algos()
1446 | ; function.
1447 | ; http://php.net/session.hash-function
1448 | session.hash_function = 0
1449 | 
1450 | ; Define how many bits are stored in each character when converting
1451 | ; the binary hash data to something readable.
1452 | ; Possible values:
1453 | ;   4  (4 bits: 0-9, a-f)
1454 | ;   5  (5 bits: 0-9, a-v)
1455 | ;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
1456 | ; Default Value: 4
1457 | ; Development Value: 5
1458 | ; Production Value: 5
1459 | ; http://php.net/session.hash-bits-per-character
1460 | session.hash_bits_per_character = 5
1461 | 
1462 | ; The URL rewriter will look for URLs in a defined set of HTML tags.
1463 | ; form/fieldset are special; if you include them here, the rewriter will
1464 | ; add a hidden <input> field with the info which is otherwise appended
1465 | ; to URLs.  If you want XHTML conformity, remove the form entry.
1466 | ; Note that all valid entries require a "=", even if no value follows.
1467 | ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
1468 | ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
1469 | ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
1470 | ; http://php.net/url-rewriter.tags
1471 | url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
1472 | 
1473 | ; Enable upload progress tracking in $_SESSION
1474 | ; Default Value: On
1475 | ; Development Value: On
1476 | ; Production Value: On
1477 | ; http://php.net/session.upload-progress.enabled
1478 | ;session.upload_progress.enabled = On
1479 | 
1480 | ; Cleanup the progress information as soon as all POST data has been read
1481 | ; (i.e. upload completed).
1482 | ; Default Value: On
1483 | ; Development Value: On
1484 | ; Production Value: On
1485 | ; http://php.net/session.upload-progress.cleanup
1486 | ;session.upload_progress.cleanup = On
1487 | 
1488 | ; A prefix used for the upload progress key in $_SESSION
1489 | ; Default Value: "upload_progress_"
1490 | ; Development Value: "upload_progress_"
1491 | ; Production Value: "upload_progress_"
1492 | ; http://php.net/session.upload-progress.prefix
1493 | ;session.upload_progress.prefix = "upload_progress_"
1494 | 
1495 | ; The index name (concatenated with the prefix) in $_SESSION
1496 | ; containing the upload progress information
1497 | ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
1498 | ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
1499 | ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
1500 | ; http://php.net/session.upload-progress.name
1501 | ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
1502 | 
1503 | ; How frequently the upload progress should be updated.
1504 | ; Given either in percentages (per-file), or in bytes
1505 | ; Default Value: "1%"
1506 | ; Development Value: "1%"
1507 | ; Production Value: "1%"
1508 | ; http://php.net/session.upload-progress.freq
1509 | ;session.upload_progress.freq =  "1%"
1510 | 
1511 | ; The minimum delay between updates, in seconds
1512 | ; Default Value: 1
1513 | ; Development Value: 1
1514 | ; Production Value: 1
1515 | ; http://php.net/session.upload-progress.min-freq
1516 | ;session.upload_progress.min_freq = "1"
1517 | 
1518 | ; Only write session data when session data is changed. Enabled by default.
1519 | ; http://php.net/session.lazy-write
1520 | ;session.lazy_write = On
1521 | 
1522 | [Assertion]
1523 | ; Switch whether to compile assertions at all (to have no overhead at run-time)
1524 | ; -1: Do not compile at all
1525 | ;  0: Jump over assertion at run-time
1526 | ;  1: Execute assertions
1527 | ; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
1528 | ; Default Value: 1
1529 | ; Development Value: 1
1530 | ; Production Value: -1
1531 | ; http://php.net/zend.assertions
1532 | zend.assertions = 1
1533 | 
1534 | ; Assert(expr); active by default.
1535 | ; http://php.net/assert.active
1536 | ;assert.active = On
1537 | 
1538 | ; Throw an AssertationException on failed assertions
1539 | ; http://php.net/assert.exception
1540 | ;assert.exception = On
1541 | 
1542 | ; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
1543 | ; http://php.net/assert.warning
1544 | ;assert.warning = On
1545 | 
1546 | ; Don't bail out by default.
1547 | ; http://php.net/assert.bail
1548 | ;assert.bail = Off
1549 | 
1550 | ; User-function to be called if an assertion fails.
1551 | ; http://php.net/assert.callback
1552 | ;assert.callback = 0
1553 | 
1554 | ; Eval the expression with current error_reporting().  Set to true if you want
1555 | ; error_reporting(0) around the eval().
1556 | ; http://php.net/assert.quiet-eval
1557 | ;assert.quiet_eval = 0
1558 | 
1559 | [COM]
1560 | ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
1561 | ; http://php.net/com.typelib-file
1562 | ;com.typelib_file =
1563 | 
1564 | ; allow Distributed-COM calls
1565 | ; http://php.net/com.allow-dcom
1566 | ;com.allow_dcom = true
1567 | 
1568 | ; autoregister constants of a components typlib on com_load()
1569 | ; http://php.net/com.autoregister-typelib
1570 | ;com.autoregister_typelib = true
1571 | 
1572 | ; register constants casesensitive
1573 | ; http://php.net/com.autoregister-casesensitive
1574 | ;com.autoregister_casesensitive = false
1575 | 
1576 | ; show warnings on duplicate constant registrations
1577 | ; http://php.net/com.autoregister-verbose
1578 | ;com.autoregister_verbose = true
1579 | 
1580 | ; The default character set code-page to use when passing strings to and from COM objects.
1581 | ; Default: system ANSI code page
1582 | ;com.code_page=
1583 | 
1584 | [mbstring]
1585 | ; language for internal character representation.
1586 | ; This affects mb_send_mail() and mbstring.detect_order.
1587 | ; http://php.net/mbstring.language
1588 | ;mbstring.language = Japanese
1589 | 
1590 | ; Use of this INI entry is deprecated, use global internal_encoding instead.
1591 | ; internal/script encoding.
1592 | ; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
1593 | ; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
1594 | ; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
1595 | ;mbstring.internal_encoding =
1596 | 
1597 | ; Use of this INI entry is deprecated, use global input_encoding instead.
1598 | ; http input encoding.
1599 | ; mbstring.encoding_traslation = On is needed to use this setting.
1600 | ; If empty, default_charset or input_encoding or mbstring.input is used.
1601 | ; The precedence is: default_charset < intput_encoding < mbsting.http_input
1602 | ; http://php.net/mbstring.http-input
1603 | ;mbstring.http_input =
1604 | 
1605 | ; Use of this INI entry is deprecated, use global output_encoding instead.
1606 | ; http output encoding.
1607 | ; mb_output_handler must be registered as output buffer to function.
1608 | ; If empty, default_charset or output_encoding or mbstring.http_output is used.
1609 | ; The precedence is: default_charset < output_encoding < mbstring.http_output
1610 | ; To use an output encoding conversion, mbstring's output handler must be set
1611 | ; otherwise output encoding conversion cannot be performed.
1612 | ; http://php.net/mbstring.http-output
1613 | ;mbstring.http_output =
1614 | 
1615 | ; enable automatic encoding translation according to
1616 | ; mbstring.internal_encoding setting. Input chars are
1617 | ; converted to internal encoding by setting this to On.
1618 | ; Note: Do _not_ use automatic encoding translation for
1619 | ;       portable libs/applications.
1620 | ; http://php.net/mbstring.encoding-translation
1621 | ;mbstring.encoding_translation = Off
1622 | 
1623 | ; automatic encoding detection order.
1624 | ; "auto" detect order is changed according to mbstring.language
1625 | ; http://php.net/mbstring.detect-order
1626 | ;mbstring.detect_order = auto
1627 | 
1628 | ; substitute_character used when character cannot be converted
1629 | ; one from another
1630 | ; http://php.net/mbstring.substitute-character
1631 | ;mbstring.substitute_character = none
1632 | 
1633 | ; overload(replace) single byte functions by mbstring functions.
1634 | ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
1635 | ; etc. Possible values are 0,1,2,4 or combination of them.
1636 | ; For example, 7 for overload everything.
1637 | ; 0: No overload
1638 | ; 1: Overload mail() function
1639 | ; 2: Overload str*() functions
1640 | ; 4: Overload ereg*() functions
1641 | ; http://php.net/mbstring.func-overload
1642 | ;mbstring.func_overload = 0
1643 | 
1644 | ; enable strict encoding detection.
1645 | ; Default: Off
1646 | ;mbstring.strict_detection = On
1647 | 
1648 | ; This directive specifies the regex pattern of content types for which mb_output_handler()
1649 | ; is activated.
1650 | ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
1651 | ;mbstring.http_output_conv_mimetype=
1652 | 
1653 | [gd]
1654 | ; Tell the jpeg decode to ignore warnings and try to create
1655 | ; a gd image. The warning will then be displayed as notices
1656 | ; disabled by default
1657 | ; http://php.net/gd.jpeg-ignore-warning
1658 | ;gd.jpeg_ignore_warning = 0
1659 | 
1660 | [exif]
1661 | ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
1662 | ; With mbstring support this will automatically be converted into the encoding
1663 | ; given by corresponding encode setting. When empty mbstring.internal_encoding
1664 | ; is used. For the decode settings you can distinguish between motorola and
1665 | ; intel byte order. A decode setting cannot be empty.
1666 | ; http://php.net/exif.encode-unicode
1667 | ;exif.encode_unicode = ISO-8859-15
1668 | 
1669 | ; http://php.net/exif.decode-unicode-motorola
1670 | ;exif.decode_unicode_motorola = UCS-2BE
1671 | 
1672 | ; http://php.net/exif.decode-unicode-intel
1673 | ;exif.decode_unicode_intel    = UCS-2LE
1674 | 
1675 | ; http://php.net/exif.encode-jis
1676 | ;exif.encode_jis =
1677 | 
1678 | ; http://php.net/exif.decode-jis-motorola
1679 | ;exif.decode_jis_motorola = JIS
1680 | 
1681 | ; http://php.net/exif.decode-jis-intel
1682 | ;exif.decode_jis_intel    = JIS
1683 | 
1684 | [Tidy]
1685 | ; The path to a default tidy configuration file to use when using tidy
1686 | ; http://php.net/tidy.default-config
1687 | ;tidy.default_config = /usr/local/lib/php/default.tcfg
1688 | 
1689 | ; Should tidy clean and repair output automatically?
1690 | ; WARNING: Do not use this option if you are generating non-html content
1691 | ; such as dynamic images
1692 | ; http://php.net/tidy.clean-output
1693 | tidy.clean_output = Off
1694 | 
1695 | [soap]
1696 | ; Enables or disables WSDL caching feature.
1697 | ; http://php.net/soap.wsdl-cache-enabled
1698 | soap.wsdl_cache_enabled=1
1699 | 
1700 | ; Sets the directory name where SOAP extension will put cache files.
1701 | ; http://php.net/soap.wsdl-cache-dir
1702 | soap.wsdl_cache_dir="/tmp"
1703 | 
1704 | ; (time to live) Sets the number of second while cached file will be used
1705 | ; instead of original one.
1706 | ; http://php.net/soap.wsdl-cache-ttl
1707 | soap.wsdl_cache_ttl=86400
1708 | 
1709 | ; Sets the size of the cache limit. (Max. number of WSDL files to cache)
1710 | soap.wsdl_cache_limit = 5
1711 | 
1712 | [sysvshm]
1713 | ; A default size of the shared memory segment
1714 | ;sysvshm.init_mem = 10000
1715 | 
1716 | [ldap]
1717 | ; Sets the maximum number of open links or -1 for unlimited.
1718 | ldap.max_links = -1
1719 | 
1720 | [mcrypt]
1721 | ; For more information about mcrypt settings see http://php.net/mcrypt-module-open
1722 | 
1723 | ; Directory where to load mcrypt algorithms
1724 | ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
1725 | ;mcrypt.algorithms_dir=
1726 | 
1727 | ; Directory where to load mcrypt modes
1728 | ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
1729 | ;mcrypt.modes_dir=
1730 | 
1731 | [dba]
1732 | ;dba.default_handler=
1733 | 
1734 | [opcache]
1735 | ; Determines if Zend OPCache is enabled
1736 | ;opcache.enable=0
1737 | 
1738 | ; Determines if Zend OPCache is enabled for the CLI version of PHP
1739 | ;opcache.enable_cli=0
1740 | 
1741 | ; The OPcache shared memory storage size.
1742 | ;opcache.memory_consumption=64
1743 | 
1744 | ; The amount of memory for interned strings in Mbytes.
1745 | ;opcache.interned_strings_buffer=4
1746 | 
1747 | ; The maximum number of keys (scripts) in the OPcache hash table.
1748 | ; Only numbers between 200 and 100000 are allowed.
1749 | ;opcache.max_accelerated_files=2000
1750 | 
1751 | ; The maximum percentage of "wasted" memory until a restart is scheduled.
1752 | ;opcache.max_wasted_percentage=5
1753 | 
1754 | ; When this directive is enabled, the OPcache appends the current working
1755 | ; directory to the script key, thus eliminating possible collisions between
1756 | ; files with the same name (basename). Disabling the directive improves
1757 | ; performance, but may break existing applications.
1758 | ;opcache.use_cwd=1
1759 | 
1760 | ; When disabled, you must reset the OPcache manually or restart the
1761 | ; webserver for changes to the filesystem to take effect.
1762 | ;opcache.validate_timestamps=1
1763 | 
1764 | ; How often (in seconds) to check file timestamps for changes to the shared
1765 | ; memory storage allocation. ("1" means validate once per second, but only
1766 | ; once per request. "0" means always validate)
1767 | ;opcache.revalidate_freq=2
1768 | 
1769 | ; Enables or disables file search in include_path optimization
1770 | ;opcache.revalidate_path=0
1771 | 
1772 | ; If disabled, all PHPDoc comments are dropped from the code to reduce the
1773 | ; size of the optimized code.
1774 | ;opcache.save_comments=1
1775 | 
1776 | ; If enabled, a fast shutdown sequence is used for the accelerated code
1777 | ;opcache.fast_shutdown=0
1778 | 
1779 | ; Allow file existence override (file_exists, etc.) performance feature.
1780 | ;opcache.enable_file_override=0
1781 | 
1782 | ; A bitmask, where each bit enables or disables the appropriate OPcache
1783 | ; passes
1784 | ;opcache.optimization_level=0xffffffff
1785 | 
1786 | ;opcache.inherited_hack=1
1787 | ;opcache.dups_fix=0
1788 | 
1789 | ; The location of the OPcache blacklist file (wildcards allowed).
1790 | ; Each OPcache blacklist file is a text file that holds the names of files
1791 | ; that should not be accelerated. The file format is to add each filename
1792 | ; to a new line. The filename may be a full path or just a file prefix
1793 | ; (i.e., /var/www/x  blacklists all the files and directories in /var/www
1794 | ; that start with 'x'). Line starting with a ; are ignored (comments).
1795 | ;opcache.blacklist_filename=
1796 | 
1797 | ; Allows exclusion of large files from being cached. By default all files
1798 | ; are cached.
1799 | ;opcache.max_file_size=0
1800 | 
1801 | ; Check the cache checksum each N requests.
1802 | ; The default value of "0" means that the checks are disabled.
1803 | ;opcache.consistency_checks=0
1804 | 
1805 | ; How long to wait (in seconds) for a scheduled restart to begin if the cache
1806 | ; is not being accessed.
1807 | ;opcache.force_restart_timeout=180
1808 | 
1809 | ; OPcache error_log file name. Empty string assumes "stderr".
1810 | ;opcache.error_log=
1811 | 
1812 | ; All OPcache errors go to the Web server log.
1813 | ; By default, only fatal errors (level 0) or errors (level 1) are logged.
1814 | ; You can also enable warnings (level 2), info messages (level 3) or
1815 | ; debug messages (level 4).
1816 | ;opcache.log_verbosity_level=1
1817 | 
1818 | ; Preferred Shared Memory back-end. Leave empty and let the system decide.
1819 | ;opcache.preferred_memory_model=
1820 | 
1821 | ; Protect the shared memory from unexpected writing during script execution.
1822 | ; Useful for internal debugging only.
1823 | ;opcache.protect_memory=0
1824 | 
1825 | ; Allows calling OPcache API functions only from PHP scripts which path is
1826 | ; started from specified string. The default "" means no restriction
1827 | ;opcache.restrict_api=
1828 | 
1829 | ; Mapping base of shared memory segments (for Windows only). All the PHP
1830 | ; processes have to map shared memory into the same address space. This
1831 | ; directive allows to manually fix the "Unable to reattach to base address"
1832 | ; errors.
1833 | ;opcache.mmap_base=
1834 | 
1835 | ; Enables and sets the second level cache directory.
1836 | ; It should improve performance when SHM memory is full, at server restart or
1837 | ; SHM reset. The default "" disables file based caching.
1838 | ;opcache.file_cache=
1839 | 
1840 | ; Enables or disables opcode caching in shared memory.
1841 | ;opcache.file_cache_only=0
1842 | 
1843 | ; Enables or disables checksum validation when script loaded from file cache.
1844 | ;opcache.file_cache_consistency_checks=1
1845 | 
1846 | ; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
1847 | ; This should improve performance, but requires appropriate OS configuration.
1848 | ;opcache.huge_code_pages=0
1849 | 
1850 | [curl]
1851 | ; A default value for the CURLOPT_CAINFO option. This is required to be an
1852 | ; absolute path.
1853 | ;curl.cainfo =
1854 | 
1855 | [openssl]
1856 | ; The location of a Certificate Authority (CA) file on the local filesystem
1857 | ; to use when verifying the identity of SSL/TLS peers. Most users should
1858 | ; not specify a value for this directive as PHP will attempt to use the
1859 | ; OS-managed cert stores in its absence. If specified, this value may still
1860 | ; be overridden on a per-stream basis via the "cafile" SSL stream context
1861 | ; option.
1862 | ;openssl.cafile=
1863 | 
1864 | ; If openssl.cafile is not specified or if the CA file is not found, the
1865 | ; directory pointed to by openssl.capath is searched for a suitable
1866 | ; certificate. This value must be a correctly hashed certificate directory.
1867 | ; Most users should not specify a value for this directive as PHP will
1868 | ; attempt to use the OS-managed cert stores in its absence. If specified,
1869 | ; this value may still be overridden on a per-stream basis via the "capath"
1870 | ; SSL stream context option.
1871 | ;openssl.capath=
1872 | 
1873 | ; Local Variables:
1874 | ; tab-width: 4
1875 | ; End:
1876 | 


--------------------------------------------------------------------------------
/docker-compose.yml:
--------------------------------------------------------------------------------
 1 | web:
 2 |   container_name: php7_apache_oci8
 3 |   build: .
 4 |   ports:
 5 |     - "80:80"
 6 |   volumes:
 7 |     - ./src:/var/www/html/
 8 |     - ./conf/apache:/etc/apache2/sites-enabled/
 9 |     # - ./conf/php:/usr/local/etc/php/
10 | 
11 | 


--------------------------------------------------------------------------------
/src/index.php:
--------------------------------------------------------------------------------
1 | <?php
2 | 
3 | phpinfo();


--------------------------------------------------------------------------------