├── Satyr 1 FR.png ├── Printing-Instructions.md ├── README.md ├── Bill-of-Materials.md └── Assembly-Instructions.md /Satyr 1 FR.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/CapraAudio/Satyr-1/HEAD/Satyr 1 FR.png -------------------------------------------------------------------------------- /Printing-Instructions.md: -------------------------------------------------------------------------------- 1 | 2 | # [Printing the Comfort Strap](https://github.com/CapraAudio/CapraStrapra-6x0/blob/main/Printing-Instructions.md) 3 | 4 | The Strap{4} and the Center Section of the headband{1} must both be printed in 95a tpu. Its easier to print with than you think. 5 | The only part aside from the comfort strap that requires special settings is the Rear Ring{A} and its very similar instructions to the comfort strap. 6 | Using the per model settings select the center circle of the Rear Housing and change the wall line count, top layers, and bottom layers to 0. 7 | Change the infill line width to .6 and the infill pattern and density to the settings listed below. 8 | 9 | ![image](https://github.com/CapraAudio/Satyr-1/assets/122894651/ede83a8b-932c-4ac9-9478-0e0d43e820a4) 10 | 11 | Tested infill patterns are as follows: 12 | 13 | - Cubic Subdivision at 50% Infill Density 14 | - Lines at 40% Infill Density 15 | - Gyroid at 30% Infill Density 16 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # Satyr-1 2 | 3 | ![20230819_123429](https://github.com/CapraAudio/Satyr-1/assets/122894651/0a2329e6-dab7-4b71-a7d0-419733163c56) 4 | 5 | Follow these instructions to the letter to assemble the Satyr 1 Headphones. Every step of this process will change the way the headphones sound and missing any of these steps will result in a headphone that does not sound like the intended product. This means it will likely will sound worse. 6 | 7 | **You can buy the files on 8 | [Etsy](https://www.etsy.com/listing/1514795781/satyr-1-3d-printable-headphone-files) or [Cults3D](https://cults3d.com/en/3d-model/gadget/satyr-1-headphones).** 9 | 10 | ## [Bill of Materials](https://github.com/CapraAudio/Satyr-1/blob/main/Bill-of-Materials.md) 11 | 12 | ## [Printing Instructions](https://github.com/CapraAudio/Satyr-1/blob/main/Printing-Instructions.md) 13 | 14 | ## [Assembly Instructions](https://github.com/CapraAudio/Satyr-1/blob/main/Assembly-Instructions.md) 15 | 16 | ## [Files for the Headband](https://www.printables.com/model/429232-capra-headband-v2) 17 | 18 | ## [Support Discord](https://discord.gg/fb4HdDvErF) 19 | 20 | Huge thanks to Griffin Silver for help with tuning this design! 21 | 22 | ### Intended Frequency Response 23 | 24 | ![Thumbnail](https://github.com/CapraAudio/Satyr-1/blob/main/Satyr%201%20FR.png) 25 | Measured with a clone IEC-711 coupler on [my own stand](https://www.printables.com/model/506860-iec711-stand). 26 | -------------------------------------------------------------------------------- /Bill-of-Materials.md: -------------------------------------------------------------------------------- 1 | # The following are Affliliate Links to the specific items and materials required to create the Satyr 1 Headphones 2 | 3 | * Pads: [JEUOCOU Replacement Ear Pads (Velour)]() 4 | 5 | (The JEUOCOU Pads listing has been swapped for different pads so they are no longer a reliable source.) 6 | 7 | [Geekria Pads (Velour)](https://www.amazon.com/gp/product/B07CL75L81?th=1&linkCode=ll1&tag=capraaudio-20&linkId=8369d346d71b5d7cd00400a0e6bf4011&language=en_US&ref_=as_li_ss_tl) Cheaper 8 | 9 | [Yaxi Pads (Velour)](https://www.amazon.com/gp/product/B07YD7CD1T?&linkCode=ll1&tag=capraaudio-20&linkId=5147015d23719cda7343fb1221408c5f&language=en_US&ref_=as_li_ss_tl) Expensive but better sound and are more comfortable 10 | 11 | [Dekoni Elite TH900 Pads(Velour)](https://www.amazon.com/dp/B077NNWNBC?th=1&linkCode=ll1&tag=capraaudio-20&linkId=b193c5b41c4a7f0c0a0f565a79b5df9f&language=en_US&ref_=as_li_ss_tl) Expensive but better Bass 12 | 13 | * Speakers: [HPD-40N16PET00-32-ND 40mm Headphone Speaker Peerless by Tympany](https://www.digikey.com/en/products/detail/peerless-by-tymphany/hpd-40n16pet00-32/6211127) 14 | 15 | * Connectors: [3-Pin Mini-XLR Connectors](https://www.amazon.com/gp/product/B01C3QTS5Q?&linkCode=ll1&tag=capraaudio-20&linkId=8fb3428bbb15e9e1d3a434bf4db9ffc6&language=en_US&ref_=as_li_ss_tl) or [3.5mm Connectors](https://www.amazon.com/gp/product/B07MN1RK7F?&linkCode=ll1&tag=capraaudio-20&linkId=889ac526c3858d08f40eced0b0526817&language=en_US&ref_=as_li_ss_tl) 16 | 17 | * Wire: [22 gauge](https://www.amazon.com/dp/B077XBWX8V?th=1&linkCode=ll1&tag=capraaudio-20&linkId=87b6b84dd02e6b85f71e0ccc792992bd&language=en_US&ref_=as_li_ss_tl) 18 | 19 | * Baffle: [Nylon Mesh (10 Micron)](https://www.amazon.com/Micron-Premium-Press-Blowout-Guarantee/dp/B08X16LVRF?th=1&linkCode=ll1&tag=capraaudio-20&linkId=f25c1b5ff076559b7717ec839b8ad7fe&language=en_US&ref_=as_li_ss_tl) 20 | 21 | * Screws: [M3 FHSC Screws recommended kit](https://www.amazon.com/gp/product/B086MC31JT?&linkCode=ll1&tag=capraaudio-20&linkId=abe5d8c31cfe08b197c5421dfdee8ac8&language=en_US&ref_=as_li_ss_tl) 22 | 23 | * Brass Inserts: [M3x4x5.7 Brass Heatset inserts](https://www.amazon.com/dp/B0CDH36ZMX?&linkCode=ll1&tag=capraaudio-20&linkId=92c2094e12d09acf605f935b380a1899&language=en_US&ref_=as_li_ss_tl) 24 | 25 | * Putty: [BluTack](https://www.amazon.com/Sticky-Tack-Samstr%C3%B6ng-Adhesive-Perfect/dp/B0839P2STQ?th=1&linkCode=ll1&tag=capraaudio-20&linkId=2b47356b0467ae3a079e02677992e6f1&language=en_US&ref_=as_li_ss_tl) 26 | 27 | Screws Required: 28 | 29 | * 16 FHSC M3x12mm 30 | * 8 FHSC M3x16mm 31 | * 22 M3x5mmx5mm Brass Heatset Inserts 32 | 33 | Additional Affiliate Links if you want to support us further: 34 | [Polymaker 95a TPU](https://www.amazon.com/gp/product/B09KL2FXNJ?smid=A3MZ696ES2UN1L&th=1&linkCode=ll1&tag=capraaudio-20&linkId=f60adf8d5ecfad1ce2dc8488b56fadd2&language=en_US&ref_=as_li_ss_t) 35 | [Polymaker PLA Pro](https://www.amazon.com/Polymaker-Filament-1-75mm-Rigidity-Cardboard/dp/B099KS2PDW?crid=3VMHU4VVDIRK1&dib=eyJ2IjoiMSJ9.0VboVAURiwa5r9liPUWFPbZei2xZdXiuOzte4NZw7_dCo1Wn7HMryxkPxzdaf6VYVLgoOE7E7v1KSt28LZn8OVwy10tJ7UHhVZUq0dlsoEmQAg-2m-PHVKZLB1cB4dTlpw9uqfo1ql75wSUTEoag9_395ByPy2HKx7SaZ7SWdZxE1O0Ac3UR6uasTPK2ZmjcZ3ARDPbsGAtcoStFhobuQr3wmrbmjFqawzwvAHOfSow.u8ot4LlqxIoZ-Y0L-9qwR6OWTrfDQleeccJQTHlcpm4&dib_tag=se&keywords=polymaker+pla+pro&qid=1737331803&sprefix=polymaker+pla+pro%2Caps%2C132&sr=8-1&linkCode=ll1&tag=capraaudio-20&linkId=13bcaf241bd8cdb9833caa1302dff47a&language=en_US&ref_=as_li_ss_tl) 36 | [Polymaker PETG](https://www.amazon.com/Polymaker-Filament-1-75mm-Strong-Cardboard/dp/B09DKRTSXW?crid=33AK3A94AQ63U&dib=eyJ2IjoiMSJ9.DH_3hg81LF9estvR_fgZpPxgXK3JM4Z611C4kgQ9kCUX6CUxuXOuQAFER5V4bOlmICHR7ccw8Ayyi_G0Z9XWrXBZV1F1D29FmCmO5hSIimXz_Bd6PSwkxU_AIc5tLS-EEFvraypbqr9LSz59FFimKlGxNERF0vmUFmGFIZrRWIG-mkTe8cFexoHy-ZftsB9vYjBdfQSRUMjx_Ilwd36VfK_JDL_n85mS2Q63OyYoiII.Bjmu63Z8C5QjjEjfROdO64kw4-lC91_mha6dHkOAMoU&dib_tag=se&keywords=polymaker+petg&qid=1737331837&sprefix=polymaker+petg%2Caps%2C117&sr=8-1&linkCode=ll1&tag=capraaudio-20&linkId=257e181f2f515b41abc24b6db60b3316&language=en_US&ref_=as_li_ss_tl) 37 | -------------------------------------------------------------------------------- /Assembly-Instructions.md: -------------------------------------------------------------------------------- 1 | # NOTICE 2 | 3 | It is very important to follow all of these steps to the letter, devating from any of these steps will result in a poorly tuned headphone. If at the end your headphones sound off or wrong give it a few days of listening before you make judgements or try to make changes, if you are used to bad headphones it may take you time to get used to good headphones. 4 | 5 | ## Assembling the Cup 6 | 7 | - First Set all of the Brass inserts into the Baffle Plate as shown in the photo below, there are 8 in total. 8 | 9 | - Insert the Grille into the Baffle Plate with the flat side down also shown in the picture.{B}{D} 10 | 11 | ![20230603_173855](https://github.com/CapraAudio/Satyr-1/assets/122894651/e4237306-4665-49e8-b6ce-bf5bcd1c1d08) 12 | 13 | - Solder the wires to the Driver(Speaker) positive and negative are shown on the PCB. 14 | 15 | ![20230603_173937](https://github.com/CapraAudio/Satyr-1/assets/122894651/bdf2af35-ef8e-4ddd-b989-696502b900ba) 16 | 17 | - Feed the wires through the hole on the side of the Rear Housing and pull through. 18 | 19 | # MiniXLR Connectors: 20 | - Solder the wires to the Mini-XLR connector as shown below. (the picture shows you facing the front of the connector) 21 | 22 | ![Screenshot 2023-07-01 113602](https://github.com/CapraAudio/Satyr-1/assets/122894651/2c4a67ad-d952-4a72-a30b-05f7dded4603) 23 | 24 | # 3.5mm Connectors: 25 | - Solder the wires to the 3.5mm connector as shown below. 26 | 27 | ![20240521_201230](https://github.com/CapraAudio/Satyr-1/assets/122894651/d3af9b17-ccc6-4de0-b97f-36079af1eae9) 28 | 29 | - I recommend for cable compatibility that you bridge the two negatives by bending the long pin towards the short negative pin as shown below. 30 | ![20240521_201307](https://github.com/CapraAudio/Satyr-1/assets/122894651/e7518954-67dc-40ed-afff-2cbc53bb133d) 31 | 32 | ![20240521_201533](https://github.com/CapraAudio/Satyr-1/assets/122894651/4e96dd81-bc68-4fd1-b997-00669ef45dd8) 33 | 34 | 35 | - Press in the 4 m3 inserts into the Rear Ring{A}. 36 | 37 | - Then press the Connector into the Rear Ring{A} with 2-3 small dabs of super glue around the outside of the connector to insure a secure connection. 38 | 39 | ![20230603_173916](https://github.com/CapraAudio/Satyr-1/assets/122894651/4936fca1-bb7a-4746-ac89-84923fd9e5bb) 40 | 41 | - Press the Driver(Speaker) into the Baffle Plate{D} as show below. 42 | 43 | - Its very important to line it up correctly as shown in the picture 44 | 45 | ![20230603_173649](https://github.com/CapraAudio/Satyr-1/assets/122894651/4ad110ed-6c15-4515-8538-cbb7567dbb4d) 46 | ![20230603_174003](https://github.com/CapraAudio/Satyr-1/assets/122894651/5de47b06-2cbf-4e90-96a6-a6d06ef0770b) 47 | 48 | - Next add the blutack to the two outside circles on the Driver Clamp{E} 49 | 50 | - **Be sure to use enough to seal the holes in the back of the Driver/Speaker!!** 51 | 52 | ![20230603_173622](https://github.com/CapraAudio/Satyr-1/assets/122894651/7a273329-be6d-4591-a6b8-bddc042d22c5) 53 | 54 | - Screw down the Driver Clamp{E} into the Baffle Plate, press it down to ensure a good seal with the blutack 55 | 56 | ![20230603_174037](https://github.com/CapraAudio/Satyr-1/assets/122894651/ad9fc3b3-26e6-4d30-a414-9879df5e97a8) 57 | 58 | - Screw the Baffle Plate{D} into the Rear Housing using 4 screws. With the thick side towards the rear of the headphone. 59 | - If you have the press bags as the source for the nylon cut it along the seam to make it flat and large enough to cover the Baffle Ring 60 | 61 | - Lay 2 layers of the nylon flat over the baffle plate{D} 62 | 63 | ![20230603_174310](https://github.com/CapraAudio/Satyr-1/assets/122894651/8af2e46b-ab0a-4a07-bd1f-0fbf26b91b17) 64 | 65 | - Press the Baffle Ring{C} into the Baffle Plate to pull the nylon taught. 66 | 67 | ![20230603_174332](https://github.com/CapraAudio/Satyr-1/assets/122894651/8fae627a-8852-4a4a-90c6-46fd478ee86b) 68 | 69 | - While holding the Nylon Taught, screw through the nylon with one of the X Screws on one side and then again on the opposite side, after that screw in the remaining 4 screws 70 | ![20230603_174354](https://github.com/CapraAudio/Satyr-1/assets/122894651/1dc98103-c713-4dbb-b7d4-86a4fe2e4526) 71 | 72 | ![20230603_174449](https://github.com/CapraAudio/Satyr-1/assets/122894651/0f5ae6d4-f049-4501-8b5b-0c3b46cc07f0) 73 | 74 | - Using a razor or other sharp object VERY CAREFULLY trim off the excess nylon. 75 | 76 | ![20230603_174841](https://github.com/CapraAudio/Satyr-1/assets/122894651/eecee1e9-9831-42c9-ba88-808cc688fd55) 77 | 78 | - Now you can install the pad 79 | 80 | ![20230603_175005](https://github.com/CapraAudio/Satyr-1/assets/122894651/5b31aa9a-1e5c-4e7c-ad49-3b810cc6d038) 81 | 82 | - Finally, using 2 M3x12 Screws and 2 M3 Washers you can attach the yoke to the cup. 83 | 84 | ### To install the Headband Follow the Instructions [HERE](https://github.com/CapraAudio/CapraHeadband/tree/main) 85 | --------------------------------------------------------------------------------