├── LICENSE.md ├── README.md ├── REPO-MEDIA ├── bambulab-studio-orca-slicer-presets-init-view.gif ├── presets-import.gif └── show-hidden-files.gif ├── filament ├── 3DJake ecoPLA Neon Orange @X1C.json ├── Atomic Filament PLA Olive Green @X1C.json ├── Atomic Filament PLA Red @X1C.json ├── C-TECH PETG Telecommunications Purple RAL4010 @X1C.json ├── ELEGOO PLA Plus @Qidi Q1 Pro.json ├── ERYONE PLA Silk Rainobw @X1C.json ├── Eryone PLA Glow @X1C.json ├── Eryone PLASilk Tricolor @X1C.json ├── Fiberlogy PCTG Black.json ├── FormFutura ABS (ApolloX) Black @X1C.json ├── FormFutura ABS (TitanX) Red @X1C.json ├── FormFutura ASA (ApolloX) White @X1C.json ├── FormFutura PLA White @X1C.json ├── FormFutura PLA Zinc Yellow @X1C.json ├── FormFutura ePETG (EasyFil) Red Transparent @X1C.json ├── Fusedmaterials PETG (Transparent).json ├── Geeetech ABS Black @X1C.json ├── Hatchbox PLA Pink @X1C.json ├── IEMAI PETG Transparent.json ├── IMEAI PETG.json ├── Jessie PLA Orange @X1C.json ├── Ninjaflex TPU (85A) @X1C.json ├── Ninjaflex TPU (85A).json ├── OlympFila SoftPLA (TRITON) Red @X1C.json ├── Overture Matte PLA @X1C.json ├── Overture PLA (PLA Pro) Yellow @X1C.json ├── Overture PLA Matte.json ├── Overture PLA.json ├── Overture TPU (95A) Black @X1C.json ├── PolyLite ABS.json ├── PolyLite PETG.json ├── PolyLite PLA.json ├── PolyTerra PLA.json ├── Prusament PETG Jungle Green.json ├── Prusament PETG.json ├── Prusament PLA Lipstick Red @X1C.json ├── Prusament PLA Silver @X1C.json ├── R3D PLA Marble @X1C.json ├── README.md ├── RECREUS PETG White @X1C.json ├── Reprapper PLA Mate Red-Blue @X1C.json ├── Reprapper PLA Silk Red-Blue @X1C.json ├── Siddament ABS @P1S.json ├── Siddament ABS @X1C.json ├── Siddament ABS CF @P1S.json ├── Siddament ABS CF @X1C.json ├── Siddament ASA @X1C.json ├── Siddament ASA CF @P1S.json ├── Siddament ASA CF @X1C.json ├── Siddament CF PLA @P1S.json ├── Siddament CF PLA @X1C.json ├── Siddament PCCF @P1S.json ├── Siddament PCCF @X1C.json ├── Siddament PETG @P1S.json ├── Siddament PETG @X1C.json ├── Siddament PETG CF @P1S.json ├── Siddament PETG CF @X1C.json ├── Siddament PLA @P1S.json ├── Siddament PLA @X1C.json ├── Siddament Silk PLA @X1C .json ├── Siddament TPU @X1C.json ├── Sunlu PETG Black.json ├── Sunlu PETG.json ├── Sunlu PLA+ Black @X1C.json ├── Sunlu PLA+ Gold @X1C.json ├── Sunlu PLA+ Gold.json ├── Sunlu PLA+ Green @X1C.json ├── Sunlu PLA+ White @X1C.json ├── Sunlu PLA+ White.json ├── eSUN PETG.json ├── eSUN PLA Wood @X1C.json ├── eSUN PLA+ Black @X1C.json ├── eSUN PLA+ Blue @X1C.json ├── eSUN PLA+ F-Silver @X1C.json ├── eSUN PLA+ Firetruck Red @X1C.json ├── eSUN PLA+ Light Blue @X1C.json ├── eSUN PLA+ Purple @X1C.json ├── eSUN PLA+ White @X1C.json ├── eSUN ePLA+ Matte Lilac @X1C.json ├── eSUN ePLA-SS Rose @X1C.json ├── eSUN eSilk PLA Violet @X1C.json ├── eSun PLA+ Red @X1C.json ├── eSun PLALite Very Peri @X1C.json ├── eSun ePLA Matte Deep Black @X1C.json ├── eSun ePLA Matte White @X1C.json ├── extrudr GreenTEC Pro @X1C.json ├── inherits │ ├── Generic ABS @base.json │ ├── Generic ABS.json │ ├── Generic ASA @base.json │ ├── Generic ASA.json │ ├── Generic HIPS @BBL X1C.json │ ├── Generic HIPS @base.json │ ├── Generic PA-CF.json │ ├── Generic PA.json │ ├── Generic PC @BBL P1S.json │ ├── Generic PC @base.json │ ├── Generic PC.json │ ├── Generic PETG @base.json │ ├── Generic PETG-CF @BBL X1C.json │ ├── Generic PETG-CF @base.json │ ├── Generic PETG.json │ ├── Generic PLA @base.json │ ├── Generic PLA High Speed @BBL P1P.json │ ├── Generic PLA High Speed @BBL X1C.json │ ├── Generic PLA High Speed @base.json │ ├── Generic PLA Silk @base.json │ ├── Generic PLA Silk.json │ ├── Generic PLA-CF @base.json │ ├── Generic PLA-CF.json │ ├── Generic PLA.json │ ├── Generic PVA @0.2 nozzle.json │ ├── Generic PVA @base.json │ ├── Generic PVA.json │ ├── Generic TPU.json │ ├── fdm_filament_abs.json │ ├── fdm_filament_asa.json │ ├── fdm_filament_common.json │ ├── fdm_filament_hips.json │ ├── fdm_filament_pa.json │ ├── fdm_filament_pc.json │ ├── fdm_filament_pet.json │ ├── fdm_filament_pla.json │ ├── fdm_filament_pva.json │ └── fdm_filament_tpu.json └── x PLA Glow Multicolor @X1C.json ├── machine ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT & PURGE & 256mm³.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT & PURGE & WIPE & LINE + 256mm³ + DYNAMIC MESH.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT & PURGE & WIPE & LINE + 256mm³.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT & PURGE + 256mm³.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT & PURGE.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE CURRENT.json ├── Bambu Lab X1 Carbon 0.4 nozzle - REDUCE PURGE.json ├── Flashforge Adventurer 3 Series 0.4 nozzle.json └── README.md └── process ├── 0.08mm Extra Fine @BBL X1C - SLOWED.json ├── 0.12mm Fine @BBL X1C - SLOWED.json ├── 0.16mm Optimal @BBL X1C - SLOWED.json ├── 0.20mm Standard @BBL X1C - SLOWED.json ├── 0.24mm Draft @BBL X1C - SLOWED.json ├── 0.28mm Extra Draft @BBL X1C - SLOWED.json └── README.md /LICENSE.md: -------------------------------------------------------------------------------- 1 | # CC0 1.0 Universal 2 | 3 | ## Statement of Purpose 4 | 5 | The laws of most jurisdictions throughout the world automatically confer exclusive Copyright and Related Rights (defined below) upon the creator and subsequent owner(s) (each and all, an “owner”) of an original work of authorship and/or a database (each, a “Work”). 6 | 7 | Certain owners wish to permanently relinquish those rights to a Work for the purpose of contributing to a commons of creative, cultural and scientific works (“Commons”) that the public can reliably and without fear of later claims of infringement build upon, modify, incorporate in other works, reuse and redistribute as freely as possible in any form whatsoever and for any purposes, including without limitation commercial purposes. These owners may contribute to the Commons to promote the ideal of a free culture and the further production of creative, cultural and scientific works, or to gain reputation or greater distribution for their Work in part through the use and efforts of others. 8 | 9 | For these and/or other purposes and motivations, and without any expectation of additional consideration or compensation, the person associating CC0 with a Work (the “Affirmer”), to the extent that he or she is an owner of Copyright and Related Rights in the Work, voluntarily elects to apply CC0 to the Work and publicly distribute the Work under its terms, with knowledge of his or her Copyright and Related Rights in the Work and the meaning and intended legal effect of CC0 on those rights. 10 | 11 | 1. Copyright and Related Rights. A Work made available under CC0 may be protected by copyright and related or neighboring rights (“Copyright and Related Rights”). Copyright and Related Rights include, but are not limited to, the following: 12 | 1. the right to reproduce, adapt, distribute, perform, display, communicate, and translate a Work; 13 | 2. moral rights retained by the original author(s) and/or performer(s); 14 | 3. publicity and privacy rights pertaining to a person’s image or likeness depicted in a Work; 15 | 4. rights protecting against unfair competition in regards to a Work, subject to the limitations in paragraph 4(i), below; 16 | 5. rights protecting the extraction, dissemination, use and reuse of data in a Work; 17 | 6. database rights (such as those arising under Directive 96/9/EC of the European Parliament and of the Council of 11 March 1996 on the legal protection of databases, and under any national implementation thereof, including any amended or successor version of such directive); and 18 | 7. other similar, equivalent or corresponding rights throughout the world based on applicable law or treaty, and any national implementations thereof. 19 | 20 | 2. Waiver. To the greatest extent permitted by, but not in contravention of, applicable law, Affirmer hereby overtly, fully, permanently, irrevocably and unconditionally waives, abandons, and surrenders all of Affirmer’s Copyright and Related Rights and associated claims and causes of action, whether now known or unknown (including existing as well as future claims and causes of action), in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the “Waiver”). Affirmer makes the Waiver for the benefit of each member of the public at large and to the detriment of Affirmer’s heirs and successors, fully intending that such Waiver shall not be subject to revocation, rescission, cancellation, termination, or any other legal or equitable action to disrupt the quiet enjoyment of the Work by the public as contemplated by Affirmer’s express Statement of Purpose. 21 | 22 | 3. Public License Fallback. Should any part of the Waiver for any reason be judged legally invalid or ineffective under applicable law, then the Waiver shall be preserved to the maximum extent permitted taking into account Affirmer’s express Statement of Purpose. In addition, to the extent the Waiver is so judged Affirmer hereby grants to each affected person a royalty-free, non transferable, non sublicensable, non exclusive, irrevocable and unconditional license to exercise Affirmer’s Copyright and Related Rights in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the “License”). The License shall be deemed effective as of the date CC0 was applied by Affirmer to the Work. Should any part of the License for any reason be judged legally invalid or ineffective under applicable law, such partial invalidity or ineffectiveness shall not invalidate the remainder of the License, and in such case Affirmer hereby affirms that he or she will not (i) exercise any of his or her remaining Copyright and Related Rights in the Work or (ii) assert any associated claims and causes of action with respect to the Work, in either case contrary to Affirmer’s express Statement of Purpose. 23 | 24 | 4. Limitations and Disclaimers. 25 | 1. No trademark or patent rights held by Affirmer are waived, abandoned, surrendered, licensed or otherwise affected by this document. 26 | 2. Affirmer offers the Work as-is and makes no representations or warranties of any kind concerning the Work, express, implied, statutory or otherwise, including without limitation warranties of title, merchantability, fitness for a particular purpose, non infringement, or the absence of latent or other defects, accuracy, or the present or absence of errors, whether or not discoverable, all to the greatest extent permissible under applicable law. 27 | 3. Affirmer disclaims responsibility for clearing rights of other persons that may apply to the Work or any use thereof, including without limitation any person’s Copyright and Related Rights in the Work. Further, Affirmer disclaims responsibility for obtaining any necessary consents, permissions or other rights required for any use of the Work. 28 | 4. Affirmer understands and acknowledges that Creative Commons is not a party to this document and has no duty or obligation with respect to this CC0 or use of the Work. 29 | 30 | For more information, please see https://creativecommons.org/publicdomain/zero/1.0/. 31 | -------------------------------------------------------------------------------- /REPO-MEDIA/bambulab-studio-orca-slicer-presets-init-view.gif: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets/acf34f650ce3de021cc04e5659cc696c18ac6d7b/REPO-MEDIA/bambulab-studio-orca-slicer-presets-init-view.gif -------------------------------------------------------------------------------- /REPO-MEDIA/presets-import.gif: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets/acf34f650ce3de021cc04e5659cc696c18ac6d7b/REPO-MEDIA/presets-import.gif -------------------------------------------------------------------------------- /REPO-MEDIA/show-hidden-files.gif: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets/acf34f650ce3de021cc04e5659cc696c18ac6d7b/REPO-MEDIA/show-hidden-files.gif -------------------------------------------------------------------------------- /filament/3DJake ecoPLA Neon Orange @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF8000" 4 | ], 5 | "filament_cost": [ 6 | "22" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.9702" 10 | ], 11 | "filament_settings_id": [ 12 | "3DJake ecoPLA Neon Orange" 13 | ], 14 | "filament_vendor": [ 15 | "3DJake" 16 | ], 17 | "from": "User", 18 | "inherits": "Generic PLA", 19 | "name": "3DJake ecoPLA Neon Orange", 20 | "nozzle_temperature": [ 21 | "210" 22 | ], 23 | "nozzle_temperature_initial_layer": [ 24 | "210" 25 | ], 26 | "nozzle_temperature_range_high": [ 27 | "215" 28 | ], 29 | "nozzle_temperature_range_low": [ 30 | "195" 31 | ], 32 | "version": "1.7.0.12" 33 | } 34 | -------------------------------------------------------------------------------- /filament/Atomic Filament PLA Olive Green @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#7EA800" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.001" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Atomic Olive Green - OAB 23.08.06" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "Atomic" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Bambu PLA Basic @BBL X1C", 31 | "name": "Atomic Filament PLA Olive Green", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/Atomic Filament PLA Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FD0600" 4 | ], 5 | "filament_cost": [ 6 | "30" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.99" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Atomic Red - OAB 23.08.15" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "Atomic" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Bambu PLA Basic @BBL X1C", 31 | "name": "Atomic Filament PLA Red", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/C-TECH PETG Telecommunications Purple RAL4010 @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "cool_plate_temp": [ 3 | "35" 4 | ], 5 | "cool_plate_temp_initial_layer": [ 6 | "35" 7 | ], 8 | "default_filament_colour": [ 9 | "#DE0191" 10 | ], 11 | "enable_pressure_advance": [ 12 | "1" 13 | ], 14 | "eng_plate_temp": [ 15 | "65" 16 | ], 17 | "filament_cost": [ 18 | "21" 19 | ], 20 | "filament_flow_ratio": [ 21 | "0.953" 22 | ], 23 | "filament_settings_id": [ 24 | "C-TECH PETG Telecommunications Purple RAL4010 @X1C" 25 | ], 26 | "filament_vendor": [ 27 | "C-TECH" 28 | ], 29 | "from": "User", 30 | "hot_plate_temp": [ 31 | "0" 32 | ], 33 | "hot_plate_temp_initial_layer": [ 34 | "0" 35 | ], 36 | "inherits": "Generic PETG", 37 | "name": "C-TECH PETG Telecommunications Purple RAL4010 @X1C", 38 | "nozzle_temperature": [ 39 | "235" 40 | ], 41 | "nozzle_temperature_initial_layer": [ 42 | "235" 43 | ], 44 | "nozzle_temperature_range_high": [ 45 | "260" 46 | ], 47 | "nozzle_temperature_range_low": [ 48 | "235" 49 | ], 50 | "textured_plate_temp": [ 51 | "0" 52 | ], 53 | "textured_plate_temp_initial_layer": [ 54 | "0" 55 | ], 56 | "version": "1.7.0.29" 57 | } 58 | -------------------------------------------------------------------------------- /filament/ERYONE PLA Silk Rainobw @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.142" 7 | ], 8 | "filament_settings_id": [ 9 | "ERYONE PLA Silk Rainobw" 10 | ], 11 | "filament_vendor": [ 12 | "ERYONE" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "ERYONE PLA Silk Rainobw", 17 | "nozzle_temperature": [ 18 | "215" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "215" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "220" 25 | ], 26 | "version": "1.7.0.18" 27 | } 28 | -------------------------------------------------------------------------------- /filament/Eryone PLA Glow @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "additional_cooling_fan_speed": [ 3 | "65" 4 | ], 5 | "default_filament_colour": [ 6 | "#0EE2A3" 7 | ], 8 | "filament_cost": [ 9 | "25" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.96" 13 | ], 14 | "filament_max_volumetric_speed": [ 15 | "17" 16 | ], 17 | "filament_settings_id": [ 18 | "PLA Eryone Glow - OAB 23.08.15" 19 | ], 20 | "filament_start_gcode": [ 21 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175\n\n; needs tuning for PA, temperature, and MVS still" 22 | ], 23 | "filament_vendor": [ 24 | "Eryone" 25 | ], 26 | "from": "User", 27 | "hot_plate_temp": [ 28 | "60" 29 | ], 30 | "hot_plate_temp_initial_layer": [ 31 | "60" 32 | ], 33 | "inherits": "Bambu PLA Basic @BBL X1C", 34 | "name": "Eryone PLA Glow", 35 | "nozzle_temperature": [ 36 | "235" 37 | ], 38 | "nozzle_temperature_initial_layer": [ 39 | "235" 40 | ], 41 | "slow_down_layer_time": [ 42 | "2" 43 | ], 44 | "temperature_vitrification": [ 45 | "60" 46 | ], 47 | "textured_plate_temp": [ 48 | "60" 49 | ], 50 | "textured_plate_temp_initial_layer": [ 51 | "60" 52 | ], 53 | "version": "1.4.1.1" 54 | } 55 | -------------------------------------------------------------------------------- /filament/Eryone PLASilk Tricolor @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF208A" 4 | ], 5 | "filament_cost": [ 6 | "30" 7 | ], 8 | "filament_density": [ 9 | "1.24" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "8" 13 | ], 14 | "filament_retraction_length": [ 15 | "0.6" 16 | ], 17 | "filament_settings_id": [ 18 | "PLA Eryone Tricolor Silk - OAB 23.08.30" 19 | ], 20 | "filament_start_gcode": [ 21 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 22 | ], 23 | "filament_vendor": [ 24 | "Eryone" 25 | ], 26 | "from": "User", 27 | "hot_plate_temp": [ 28 | "60" 29 | ], 30 | "hot_plate_temp_initial_layer": [ 31 | "60" 32 | ], 33 | "inherits": "Bambu PLA Basic @BBL X1C", 34 | "name": "Eryone PLASilk Tricolor", 35 | "nozzle_temperature": [ 36 | "230" 37 | ], 38 | "nozzle_temperature_initial_layer": [ 39 | "230" 40 | ], 41 | "slow_down_layer_time": [ 42 | "2" 43 | ], 44 | "temperature_vitrification": [ 45 | "60" 46 | ], 47 | "textured_plate_temp": [ 48 | "60" 49 | ], 50 | "textured_plate_temp_initial_layer": [ 51 | "60" 52 | ], 53 | "version": "1.4.1.1" 54 | } 55 | -------------------------------------------------------------------------------- /filament/Fiberlogy PCTG Black.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#000000" 4 | ], 5 | "eng_plate_temp": [ 6 | "88" 7 | ], 8 | "eng_plate_temp_initial_layer": [ 9 | "100" 10 | ], 11 | "filament_cost": [ 12 | "45.32" 13 | ], 14 | "filament_flow_ratio": [ 15 | "1.08" 16 | ], 17 | "filament_settings_id": [ 18 | "Fiberlogy PCTG Black" 19 | ], 20 | "filament_vendor": [ 21 | "Fiberlogy" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "88" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "100" 29 | ], 30 | "inherits": "Generic PC", 31 | "name": "Fiberlogy PCTG Black", 32 | "nozzle_temperature": [ 33 | "265" 34 | ], 35 | "nozzle_temperature_range_high": [ 36 | "270" 37 | ], 38 | "nozzle_temperature_range_low": [ 39 | "250" 40 | ], 41 | "textured_plate_temp": [ 42 | "88" 43 | ], 44 | "textured_plate_temp_initial_layer": [ 45 | "100" 46 | ], 47 | "version": "1.7.0.12" 48 | } 49 | -------------------------------------------------------------------------------- /filament/FormFutura ABS (ApolloX) Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#101010" 4 | ], 5 | "filament_settings_id": [ 6 | "FormFutura ABS (ApolloX) Black" 7 | ], 8 | "filament_vendor": [ 9 | "FormFutura" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic ABS", 13 | "name": "FormFutura ABS (ApolloX) Black", 14 | "nozzle_temperature": [ 15 | "255" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "255" 19 | ], 20 | "nozzle_temperature_range_high": [ 21 | "260" 22 | ], 23 | "version": "1.7.0.12" 24 | } 25 | -------------------------------------------------------------------------------- /filament/FormFutura ABS (TitanX) Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF0000" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.118" 7 | ], 8 | "filament_settings_id": [ 9 | "FormFutura ABS (TitanX) Red" 10 | ], 11 | "filament_vendor": [ 12 | "FormFutura" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic ABS", 16 | "name": "FormFutura ABS (TitanX) Red", 17 | "nozzle_temperature": [ 18 | "255" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "255" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "260" 25 | ], 26 | "version": "1.7.0.12" 27 | } 28 | -------------------------------------------------------------------------------- /filament/FormFutura ASA (ApolloX) White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.963" 7 | ], 8 | "filament_settings_id": [ 9 | "FormFutura ASA (ApolloX) White" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic ASA", 13 | "name": "FormFutura ASA (ApolloX) White", 14 | "nozzle_temperature": [ 15 | "255" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "255" 19 | ], 20 | "version": "1.7.0.12" 21 | } 22 | -------------------------------------------------------------------------------- /filament/FormFutura PLA White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.961" 7 | ], 8 | "filament_settings_id": [ 9 | "FormFutura PLA (ReFill) White" 10 | ], 11 | "filament_vendor": [ 12 | "FormFutura" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "FormFutura PLA (ReFill) White", 17 | "nozzle_temperature": [ 18 | "215" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "215" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "220" 25 | ], 26 | "nozzle_temperature_range_low": [ 27 | "200" 28 | ], 29 | "version": "1.7.0.12" 30 | } 31 | -------------------------------------------------------------------------------- /filament/FormFutura PLA Zinc Yellow @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFF00" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.965" 7 | ], 8 | "filament_settings_id": [ 9 | "FormFutura PLA (ReFill) Zinc Yellow" 10 | ], 11 | "filament_vendor": [ 12 | "FormFutura" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "FormFutura PLA (ReFill) Zinc Yellow", 17 | "version": "1.7.0.12" 18 | } 19 | -------------------------------------------------------------------------------- /filament/FormFutura ePETG (EasyFil) Red Transparent @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF5959" 4 | ], 5 | "eng_plate_temp": [ 6 | "85" 7 | ], 8 | "eng_plate_temp_initial_layer": [ 9 | "85" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.9215" 13 | ], 14 | "filament_settings_id": [ 15 | "FormFutura ePETG (EasyFil) Red Transparent" 16 | ], 17 | "from": "User", 18 | "hot_plate_temp": [ 19 | "85" 20 | ], 21 | "hot_plate_temp_initial_layer": [ 22 | "85" 23 | ], 24 | "inherits": "Generic PETG", 25 | "name": "FormFutura ePETG (EasyFil) Red Transparent", 26 | "nozzle_temperature": [ 27 | "250" 28 | ], 29 | "nozzle_temperature_initial_layer": [ 30 | "250" 31 | ], 32 | "nozzle_temperature_range_high": [ 33 | "255" 34 | ], 35 | "nozzle_temperature_range_low": [ 36 | "235" 37 | ], 38 | "temperature_vitrification": [ 39 | "90" 40 | ], 41 | "textured_plate_temp": [ 42 | "85" 43 | ], 44 | "textured_plate_temp_initial_layer": [ 45 | "85" 46 | ], 47 | "version": "1.7.0.12" 48 | } 49 | -------------------------------------------------------------------------------- /filament/Fusedmaterials PETG (Transparent).json: -------------------------------------------------------------------------------- 1 | { 2 | "enable_pressure_advance": [ 3 | "1" 4 | ], 5 | "eng_plate_temp": [ 6 | "60" 7 | ], 8 | "eng_plate_temp_initial_layer": [ 9 | "60" 10 | ], 11 | "fan_cooling_layer_time": [ 12 | "25" 13 | ], 14 | "fan_max_speed": [ 15 | "25" 16 | ], 17 | "fan_min_speed": [ 18 | "15" 19 | ], 20 | "filament_flow_ratio": [ 21 | "0.96" 22 | ], 23 | "filament_max_volumetric_speed": [ 24 | "7" 25 | ], 26 | "filament_retract_before_wipe": [ 27 | "85%" 28 | ], 29 | "filament_settings_id": [ 30 | "PETG FUSEDMATS Transparent - OAB 23.07.11" 31 | ], 32 | "filament_start_gcode": [ 33 | "; chamber fan speed 20% for PETG TRANSPARENT. Increase to S200 if you run your ; printer in a hot environment.\nM106 P3 S51" 34 | ], 35 | "filament_vendor": [ 36 | "FusedMats" 37 | ], 38 | "from": "User", 39 | "hot_plate_temp": [ 40 | "60" 41 | ], 42 | "hot_plate_temp_initial_layer": [ 43 | "60" 44 | ], 45 | "inherits": "Generic PETG", 46 | "name": "PETG FUSEDMATS Transparent - OAB 23.07.11", 47 | "nozzle_temperature": [ 48 | "265" 49 | ], 50 | "nozzle_temperature_initial_layer": [ 51 | "265" 52 | ], 53 | "nozzle_temperature_range_high": [ 54 | "280" 55 | ], 56 | "overhang_fan_speed": [ 57 | "25" 58 | ], 59 | "slow_down_layer_time": [ 60 | "2" 61 | ], 62 | "slow_down_min_speed": [ 63 | "15" 64 | ], 65 | "temperature_vitrification": [ 66 | "85" 67 | ], 68 | "textured_plate_temp": [ 69 | "60" 70 | ], 71 | "textured_plate_temp_initial_layer": [ 72 | "60" 73 | ], 74 | "version": "1.3.0.13" 75 | } 76 | -------------------------------------------------------------------------------- /filament/Geeetech ABS Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#101010" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.051" 7 | ], 8 | "filament_settings_id": [ 9 | "Geeetech ABS Black" 10 | ], 11 | "filament_vendor": [ 12 | "Geeetech" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic ABS", 16 | "name": "Geeetech ABS Black", 17 | "nozzle_temperature": [ 18 | "235" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "235" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "240" 25 | ], 26 | "nozzle_temperature_range_low": [ 27 | "230" 28 | ], 29 | "version": "1.7.0.12" 30 | } 31 | -------------------------------------------------------------------------------- /filament/Hatchbox PLA Pink @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FE529F" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.99" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Hatchbox Pink - OAB 23.08.05" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "Hatchbox" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Bambu PLA Basic @BBL X1C", 31 | "name": "Hatchbox PLA Pink", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/IEMAI PETG Transparent.json: -------------------------------------------------------------------------------- 1 | { 2 | "eng_plate_temp": [ 3 | "60" 4 | ], 5 | "eng_plate_temp_initial_layer": [ 6 | "60" 7 | ], 8 | "fan_cooling_layer_time": [ 9 | "25" 10 | ], 11 | "fan_max_speed": [ 12 | "10" 13 | ], 14 | "fan_min_speed": [ 15 | "10" 16 | ], 17 | "filament_flow_ratio": [ 18 | "0.957" 19 | ], 20 | "filament_max_volumetric_speed": [ 21 | "7" 22 | ], 23 | "filament_settings_id": [ 24 | "PETG IEMAI Transparent - OAB 23.07.14" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 20% for PETG TRANSPARENT. Increase to S200 if you run your ; printer in a hot environment.\nM106 P3 S51" 28 | ], 29 | "filament_vendor": [ 30 | "IEMAI" 31 | ], 32 | "from": "User", 33 | "hot_plate_temp": [ 34 | "60" 35 | ], 36 | "hot_plate_temp_initial_layer": [ 37 | "60" 38 | ], 39 | "inherits": "Generic PETG", 40 | "name": "IEMAI PETG Transparent", 41 | "nozzle_temperature": [ 42 | "265" 43 | ], 44 | "nozzle_temperature_initial_layer": [ 45 | "265" 46 | ], 47 | "nozzle_temperature_range_high": [ 48 | "280" 49 | ], 50 | "overhang_fan_speed": [ 51 | "30" 52 | ], 53 | "slow_down_for_layer_cooling": [ 54 | "0" 55 | ], 56 | "slow_down_layer_time": [ 57 | "2" 58 | ], 59 | "slow_down_min_speed": [ 60 | "15" 61 | ], 62 | "temperature_vitrification": [ 63 | "75" 64 | ], 65 | "textured_plate_temp": [ 66 | "60" 67 | ], 68 | "textured_plate_temp_initial_layer": [ 69 | "60" 70 | ], 71 | "version": "1.3.0.13" 72 | } 73 | -------------------------------------------------------------------------------- /filament/IMEAI PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "fan_max_speed": [ 3 | "70" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.957" 7 | ], 8 | "filament_max_volumetric_speed": [ 9 | "16" 10 | ], 11 | "filament_retract_before_wipe": [ 12 | "85%" 13 | ], 14 | "filament_settings_id": [ 15 | "PETG IMEAI - OAB 23.06.11" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "from": "User", 21 | "hot_plate_temp": [ 22 | "65" 23 | ], 24 | "hot_plate_temp_initial_layer": [ 25 | "65" 26 | ], 27 | "inherits": "Generic PETG", 28 | "name": "IMEAI PETG", 29 | "nozzle_temperature": [ 30 | "260" 31 | ], 32 | "nozzle_temperature_initial_layer": [ 33 | "260" 34 | ], 35 | "nozzle_temperature_range_high": [ 36 | "280" 37 | ], 38 | "overhang_fan_speed": [ 39 | "85" 40 | ], 41 | "slow_down_layer_time": [ 42 | "2" 43 | ], 44 | "slow_down_min_speed": [ 45 | "15" 46 | ], 47 | "temperature_vitrification": [ 48 | "75" 49 | ], 50 | "textured_plate_temp": [ 51 | "65" 52 | ], 53 | "textured_plate_temp_initial_layer": [ 54 | "65" 55 | ], 56 | "version": "1.3.0.13" 57 | } 58 | -------------------------------------------------------------------------------- /filament/Jessie PLA Orange @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF8000" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.96" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Jessie Orange - OAB 23.08.06" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "Printed Solid" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Bambu PLA Basic @BBL X1C", 31 | "name": "Jessie PLA Orange", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/Ninjaflex TPU (85A) @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "additional_cooling_fan_speed": [ 3 | "100" 4 | ], 5 | "default_filament_colour": [ 6 | "#000000" 7 | ], 8 | "filament_cost": [ 9 | "50" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.98" 13 | ], 14 | "filament_max_volumetric_speed": [ 15 | "2.9" 16 | ], 17 | "filament_retract_before_wipe": [ 18 | "55%" 19 | ], 20 | "filament_retraction_length": [ 21 | "nil" 22 | ], 23 | "filament_settings_id": [ 24 | "Ninjaflex TPU (85A) @X1C" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 50% for TPU. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S127" 28 | ], 29 | "filament_vendor": [ 30 | "NinjaTek" 31 | ], 32 | "filament_z_hop_types": [ 33 | "Slope Lift" 34 | ], 35 | "from": "User", 36 | "hot_plate_temp": [ 37 | "30" 38 | ], 39 | "hot_plate_temp_initial_layer": [ 40 | "30" 41 | ], 42 | "inherits": "Generic TPU", 43 | "name": "Ninjaflex TPU (85A) @X1C", 44 | "nozzle_temperature": [ 45 | "250" 46 | ], 47 | "nozzle_temperature_initial_layer": [ 48 | "245" 49 | ], 50 | "nozzle_temperature_range_low": [ 51 | "225" 52 | ], 53 | "slow_down_layer_time": [ 54 | "2" 55 | ], 56 | "temperature_vitrification": [ 57 | "60" 58 | ], 59 | "textured_plate_temp": [ 60 | "30" 61 | ], 62 | "textured_plate_temp_initial_layer": [ 63 | "30" 64 | ], 65 | "version": "1.6.0.3" 66 | } 67 | -------------------------------------------------------------------------------- /filament/Ninjaflex TPU (85A).json: -------------------------------------------------------------------------------- 1 | { 2 | "additional_cooling_fan_speed": [ 3 | "100" 4 | ], 5 | "default_filament_colour": [ 6 | "#000000" 7 | ], 8 | "filament_cost": [ 9 | "50" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.98" 13 | ], 14 | "filament_max_volumetric_speed": [ 15 | "2.9" 16 | ], 17 | "filament_retract_before_wipe": [ 18 | "55%" 19 | ], 20 | "filament_retraction_length": [ 21 | "nil" 22 | ], 23 | "filament_settings_id": [ 24 | "TPU85A Ninjaflex - OAB 23.06.13" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 50% for TPU. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S127" 28 | ], 29 | "filament_vendor": [ 30 | "NinjaTek" 31 | ], 32 | "filament_z_hop_types": [ 33 | "Slope Lift" 34 | ], 35 | "from": "User", 36 | "hot_plate_temp": [ 37 | "30" 38 | ], 39 | "hot_plate_temp_initial_layer": [ 40 | "30" 41 | ], 42 | "inherits": "Generic TPU", 43 | "name": "Ninjaflex TPU (85A)", 44 | "nozzle_temperature": [ 45 | "250" 46 | ], 47 | "nozzle_temperature_initial_layer": [ 48 | "245" 49 | ], 50 | "nozzle_temperature_range_low": [ 51 | "225" 52 | ], 53 | "slow_down_layer_time": [ 54 | "2" 55 | ], 56 | "temperature_vitrification": [ 57 | "60" 58 | ], 59 | "textured_plate_temp": [ 60 | "30" 61 | ], 62 | "textured_plate_temp_initial_layer": [ 63 | "30" 64 | ], 65 | "version": "1.6.0.3" 66 | } 67 | -------------------------------------------------------------------------------- /filament/OlympFila SoftPLA (TRITON) Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "cool_plate_temp": [ 3 | "45" 4 | ], 5 | "cool_plate_temp_initial_layer": [ 6 | "45" 7 | ], 8 | "default_filament_colour": [ 9 | "#FF3333" 10 | ], 11 | "filament_cost": [ 12 | "48" 13 | ], 14 | "filament_flow_ratio": [ 15 | "1.073" 16 | ], 17 | "filament_settings_id": [ 18 | "OlympFila SoftPLA (TRITON) Red @X1C" 19 | ], 20 | "filament_vendor": [ 21 | "Sunlu" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "50" 26 | ], 27 | "inherits": "Generic PLA", 28 | "is_custom_defined": "0", 29 | "name": "OlympFila SoftPLA (TRITON) Red @X1C", 30 | "nozzle_temperature": [ 31 | "210" 32 | ], 33 | "nozzle_temperature_initial_layer": [ 34 | "210" 35 | ], 36 | "nozzle_temperature_range_high": [ 37 | "230" 38 | ], 39 | "nozzle_temperature_range_low": [ 40 | "210" 41 | ], 42 | "textured_cool_plate_temp": [ 43 | "45" 44 | ], 45 | "textured_cool_plate_temp_initial_layer": [ 46 | "45" 47 | ], 48 | "textured_plate_temp": [ 49 | "50" 50 | ], 51 | "version": "1.7.0.18" 52 | } 53 | -------------------------------------------------------------------------------- /filament/Overture Matte PLA @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Overture Matte PLA @BBL X1C", 4 | "inherits": "Overture Matte PLA @base", 5 | "from": "system", 6 | "setting_id": "GFSL05_00", 7 | "instantiation": "true", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 Carbon 0.6 nozzle", 11 | "Bambu Lab X1 Carbon 0.8 nozzle", 12 | "Bambu Lab P1S 0.4 nozzle", 13 | "Bambu Lab P1S 0.6 nozzle", 14 | "Bambu Lab P1S 0.8 nozzle", 15 | "Bambu Lab X1E 0.4 nozzle", 16 | "Bambu Lab X1E 0.6 nozzle", 17 | "Bambu Lab X1E 0.8 nozzle" 18 | ] 19 | } -------------------------------------------------------------------------------- /filament/Overture PLA (PLA Pro) Yellow @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FBE800" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.052" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Overture Pro Yellow - OAB 23.08.17" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "Overture" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Bambu PLA Basic @BBL X1C", 31 | "name": "Overture PLA (PLA Pro) Yellow", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/Overture PLA Matte.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Overture Matte PLA @base", 4 | "inherits": "fdm_filament_pla", 5 | "from": "system", 6 | "filament_id": "GFL05", 7 | "instantiation": "false", 8 | "filament_cost": [ 9 | "24.52" 10 | ], 11 | "filament_density": [ 12 | "1.22" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.98" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "16" 19 | ], 20 | "filament_vendor": [ 21 | "Overture" 22 | ], 23 | "slow_down_layer_time": [ 24 | "6" 25 | ] 26 | } -------------------------------------------------------------------------------- /filament/Overture PLA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Overture PLA @base", 4 | "inherits": "fdm_filament_pla", 5 | "from": "system", 6 | "filament_id": "GFL04", 7 | "instantiation": "false", 8 | "filament_cost": [ 9 | "24.15" 10 | ], 11 | "filament_density": [ 12 | "1.2" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.98" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "15" 19 | ], 20 | "filament_vendor": [ 21 | "Overture" 22 | ], 23 | "slow_down_layer_time": [ 24 | "6" 25 | ] 26 | } -------------------------------------------------------------------------------- /filament/Overture TPU (95A) Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "cool_plate_temp": [ 3 | "1" 4 | ], 5 | "cool_plate_temp_initial_layer": [ 6 | "50" 7 | ], 8 | "default_filament_colour": [ 9 | "#111111" 10 | ], 11 | "eng_plate_temp": [ 12 | "1" 13 | ], 14 | "eng_plate_temp_initial_layer": [ 15 | "50" 16 | ], 17 | "filament_settings_id": [ 18 | "Overture TPU (95A) Black" 19 | ], 20 | "from": "User", 21 | "hot_plate_temp": [ 22 | "1" 23 | ], 24 | "hot_plate_temp_initial_layer": [ 25 | "50" 26 | ], 27 | "inherits": "Generic TPU", 28 | "name": "Overture TPU (95A) Black", 29 | "nozzle_temperature": [ 30 | "225" 31 | ], 32 | "nozzle_temperature_initial_layer": [ 33 | "225" 34 | ], 35 | "nozzle_temperature_range_high": [ 36 | "230" 37 | ], 38 | "nozzle_temperature_range_low": [ 39 | "210" 40 | ], 41 | "temperature_vitrification": [ 42 | "55" 43 | ], 44 | "textured_plate_temp": [ 45 | "1" 46 | ], 47 | "textured_plate_temp_initial_layer": [ 48 | "50" 49 | ], 50 | "version": "1.7.0.25" 51 | } 52 | -------------------------------------------------------------------------------- /filament/PolyLite ABS.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "PolyLite ABS @base", 4 | "inherits": "fdm_filament_abs", 5 | "from": "system", 6 | "filament_id": "GFB60", 7 | "instantiation": "false", 8 | "filament_cost": [ 9 | "26.9" 10 | ], 11 | "filament_density": [ 12 | "1.03" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.95" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "15" 19 | ], 20 | "filament_vendor": [ 21 | "Polymaker" 22 | ] 23 | } -------------------------------------------------------------------------------- /filament/PolyLite PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "PolyLite PETG @base", 4 | "inherits": "fdm_filament_pet", 5 | "from": "system", 6 | "filament_id": "GFG60", 7 | "instantiation": "false", 8 | "cool_plate_temp": [ 9 | "0" 10 | ], 11 | "cool_plate_temp_initial_layer": [ 12 | "0" 13 | ], 14 | "eng_plate_temp": [ 15 | "70" 16 | ], 17 | "eng_plate_temp_initial_layer": [ 18 | "70" 19 | ], 20 | "fan_cooling_layer_time": [ 21 | "30" 22 | ], 23 | "fan_max_speed": [ 24 | "90" 25 | ], 26 | "fan_min_speed": [ 27 | "40" 28 | ], 29 | "filament_flow_ratio": [ 30 | "0.95" 31 | ], 32 | "filament_vendor": [ 33 | "Polymaker" 34 | ], 35 | "hot_plate_temp": [ 36 | "70" 37 | ], 38 | "hot_plate_temp_initial_layer": [ 39 | "70" 40 | ], 41 | "overhang_fan_speed": [ 42 | "90" 43 | ], 44 | "overhang_fan_threshold": [ 45 | "10%" 46 | ], 47 | "slow_down_min_speed": [ 48 | "20" 49 | ], 50 | "textured_plate_temp": [ 51 | "70" 52 | ], 53 | "textured_plate_temp_initial_layer": [ 54 | "70" 55 | ] 56 | } -------------------------------------------------------------------------------- /filament/PolyLite PLA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "PolyLite PLA @base", 4 | "inherits": "fdm_filament_pla", 5 | "from": "system", 6 | "filament_id": "GFL00", 7 | "instantiation": "false", 8 | "filament_cost": [ 9 | "25.4" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.95" 13 | ], 14 | "filament_vendor": [ 15 | "Polymaker" 16 | ] 17 | } -------------------------------------------------------------------------------- /filament/PolyTerra PLA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "PolyTerra PLA @base", 4 | "inherits": "fdm_filament_pla", 5 | "from": "system", 6 | "filament_id": "GFL01", 7 | "instantiation": "false", 8 | "filament_cost": [ 9 | "25.4" 10 | ], 11 | "filament_density": [ 12 | "1.31" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.98" 16 | ], 17 | "filament_vendor": [ 18 | "Polymaker" 19 | ] 20 | } -------------------------------------------------------------------------------- /filament/Prusament PETG Jungle Green.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#00912C" 4 | ], 5 | "eng_plate_temp": [ 6 | "65" 7 | ], 8 | "eng_plate_temp_initial_layer": [ 9 | "65" 10 | ], 11 | "fan_max_speed": [ 12 | "70" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.997" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "16" 19 | ], 20 | "filament_retract_before_wipe": [ 21 | "85%" 22 | ], 23 | "filament_settings_id": [ 24 | "PETG Prusament Jungle Green - OAB 23.08.10" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 50% for PETG. Increase to S255 if you run your ; printer in a hot environment.\nM106 P3 S127" 28 | ], 29 | "from": "User", 30 | "hot_plate_temp": [ 31 | "65" 32 | ], 33 | "hot_plate_temp_initial_layer": [ 34 | "65" 35 | ], 36 | "inherits": "Generic PETG", 37 | "name": "Prusament PETG Jungle Green", 38 | "nozzle_temperature": [ 39 | "260" 40 | ], 41 | "nozzle_temperature_initial_layer": [ 42 | "260" 43 | ], 44 | "nozzle_temperature_range_high": [ 45 | "280" 46 | ], 47 | "overhang_fan_speed": [ 48 | "85" 49 | ], 50 | "slow_down_layer_time": [ 51 | "2" 52 | ], 53 | "temperature_vitrification": [ 54 | "75" 55 | ], 56 | "textured_plate_temp": [ 57 | "65" 58 | ], 59 | "textured_plate_temp_initial_layer": [ 60 | "65" 61 | ], 62 | "version": "1.3.0.13" 63 | } 64 | -------------------------------------------------------------------------------- /filament/Prusament PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "eng_plate_temp": [ 3 | "65" 4 | ], 5 | "eng_plate_temp_initial_layer": [ 6 | "65" 7 | ], 8 | "fan_max_speed": [ 9 | "70" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.93" 13 | ], 14 | "filament_max_volumetric_speed": [ 15 | "16" 16 | ], 17 | "filament_retract_before_wipe": [ 18 | "85%" 19 | ], 20 | "filament_settings_id": [ 21 | "PETG Prusament - OAB 23.06.25" 22 | ], 23 | "filament_start_gcode": [ 24 | "; chamber fan speed 50% for PETG. Increase to S255 if you run your ; printer in a hot environment.\nM106 P3 S127" 25 | ], 26 | "from": "User", 27 | "hot_plate_temp": [ 28 | "65" 29 | ], 30 | "hot_plate_temp_initial_layer": [ 31 | "65" 32 | ], 33 | "inherits": "Generic PETG", 34 | "name": "Prusament PETG", 35 | "nozzle_temperature": [ 36 | "260" 37 | ], 38 | "nozzle_temperature_initial_layer": [ 39 | "260" 40 | ], 41 | "nozzle_temperature_range_high": [ 42 | "280" 43 | ], 44 | "overhang_fan_speed": [ 45 | "85" 46 | ], 47 | "slow_down_layer_time": [ 48 | "2" 49 | ], 50 | "temperature_vitrification": [ 51 | "75" 52 | ], 53 | "textured_plate_temp": [ 54 | "65" 55 | ], 56 | "textured_plate_temp_initial_layer": [ 57 | "65" 58 | ], 59 | "version": "1.3.0.13" 60 | } 61 | -------------------------------------------------------------------------------- /filament/Prusament PLA Lipstick Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF0000" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.958" 10 | ], 11 | "filament_notes": [ 12 | "195C or 205C for a matte finish, or 220 or more for a more shiny finish" 13 | ], 14 | "filament_settings_id": [ 15 | "Prusament PLA Lipstick Red" 16 | ], 17 | "filament_vendor": [ 18 | "PRUSA" 19 | ], 20 | "from": "User", 21 | "inherits": "Generic PLA", 22 | "name": "Prusament PLA Lipstick Red", 23 | "nozzle_temperature": [ 24 | "215" 25 | ], 26 | "nozzle_temperature_initial_layer": [ 27 | "215" 28 | ], 29 | "nozzle_temperature_range_high": [ 30 | "220" 31 | ], 32 | "version": "1.7.0.25" 33 | } 34 | -------------------------------------------------------------------------------- /filament/Prusament PLA Silver @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#C8C8C8" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.019" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA Prusament Silver - OAB 23.08.02" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "from": "User", 21 | "hot_plate_temp": [ 22 | "60" 23 | ], 24 | "hot_plate_temp_initial_layer": [ 25 | "60" 26 | ], 27 | "inherits": "Bambu PLA Basic @BBL X1C", 28 | "name": "Prusament PLA Silver", 29 | "slow_down_layer_time": [ 30 | "2" 31 | ], 32 | "temperature_vitrification": [ 33 | "60" 34 | ], 35 | "textured_plate_temp": [ 36 | "60" 37 | ], 38 | "textured_plate_temp_initial_layer": [ 39 | "60" 40 | ], 41 | "version": "1.4.1.1" 42 | } 43 | -------------------------------------------------------------------------------- /filament/R3D PLA Marble @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#B0B0B0" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.978" 7 | ], 8 | "filament_settings_id": [ 9 | "R3D PLA Marble" 10 | ], 11 | "filament_vendor": [ 12 | "R3D" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "R3D PLA Marble", 17 | "nozzle_temperature": [ 18 | "200" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "200" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "210" 25 | ], 26 | "version": "1.7.0.12" 27 | } 28 | -------------------------------------------------------------------------------- /filament/README.md: -------------------------------------------------------------------------------- 1 | Naming Convention for Filament User Presets 2 | 3 | `\ \ <(SPECIAL NAME OF MATERIAL)> \ @\` 4 | 5 | e.g 6 | 7 | `FormFutura PLA (ReFill) Zinc Yellow @X1C` 8 | -------------------------------------------------------------------------------- /filament/RECREUS PETG White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_settings_id": [ 6 | "RECREUS PETG White" 7 | ], 8 | "filament_vendor": [ 9 | "RECREUS" 10 | ], 11 | "from": "User", 12 | "hot_plate_temp": [ 13 | "0" 14 | ], 15 | "hot_plate_temp_initial_layer": [ 16 | "0" 17 | ], 18 | "inherits": "Generic PETG", 19 | "name": "RECREUS PETG White", 20 | "nozzle_temperature_range_high": [ 21 | "260" 22 | ], 23 | "nozzle_temperature_range_low": [ 24 | "230" 25 | ], 26 | "textured_plate_temp": [ 27 | "0" 28 | ], 29 | "textured_plate_temp_initial_layer": [ 30 | "0" 31 | ], 32 | "version": "1.7.0.29" 33 | } 34 | -------------------------------------------------------------------------------- /filament/Reprapper PLA Mate Red-Blue @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF0000" 4 | ], 5 | "filament_cost": [ 6 | "30" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.975" 10 | ], 11 | "filament_settings_id": [ 12 | "Reprapper PLA Mate Red-Blue @X1C" 13 | ], 14 | "filament_vendor": [ 15 | "Reprapper" 16 | ], 17 | "from": "User", 18 | "inherits": "Bambu PLA Basic @BBL X1C", 19 | "name": "Reprapper PLA Mate Red-Blue @X1C", 20 | "nozzle_temperature": [ 21 | "215" 22 | ], 23 | "nozzle_temperature_initial_layer": [ 24 | "215" 25 | ], 26 | "nozzle_temperature_range_high": [ 27 | "220" 28 | ], 29 | "nozzle_temperature_range_low": [ 30 | "180" 31 | ], 32 | "version": "1.7.0.12" 33 | } 34 | -------------------------------------------------------------------------------- /filament/Reprapper PLA Silk Red-Blue @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF0000" 4 | ], 5 | "filament_cost": [ 6 | "30" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.969" 10 | ], 11 | "filament_settings_id": [ 12 | "Reprapper PLA Silk Red-Blue @X1C" 13 | ], 14 | "filament_vendor": [ 15 | "Reprapper" 16 | ], 17 | "from": "User", 18 | "inherits": "Generic PLA Silk", 19 | "name": "Reprapper PLA Silk Red-Blue @X1C", 20 | "nozzle_temperature_range_high": [ 21 | "220" 22 | ], 23 | "version": "1.7.0.12" 24 | } 25 | -------------------------------------------------------------------------------- /filament/Siddament ABS @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | "Bambu Lab P1P 0.8 nozzle", 19 | "Bambu Lab P1P 0.4 nozzle", 20 | "Bambu Lab P1P 0.6 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "100" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "100" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "20" 60 | ], 61 | "filament_cost": [ 62 | "16.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.92" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ABS P1S BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ABS" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "100" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "100" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ABS P1S BIG PARTS", 145 | "nozzle_temperature": [ 146 | "270" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "260" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "100" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "100" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament ABS @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "100" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "100" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "20" 60 | ], 61 | "filament_cost": [ 62 | "16.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.92" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ABS X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ABS" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "100" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "100" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ABS X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "270" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "260" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "100" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "100" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament ABS CF @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | "Bambu Lab P1P 0.8 nozzle", 19 | "Bambu Lab P1P 0.4 nozzle", 20 | "Bambu Lab P1P 0.6 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "100" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "100" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "80" 60 | ], 61 | "filament_cost": [ 62 | "29.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.93" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ABS CF P1S BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ABS" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "100" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "100" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ABS CF P1S BIG PARTS", 145 | "nozzle_temperature": [ 146 | "270" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "270" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "100" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "100" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament ABS CF @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "110" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "110" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "80" 60 | ], 61 | "filament_cost": [ 62 | "29.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.93" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ABS CF X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ABS" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "110" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "110" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ABS CF X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "270" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "270" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "110" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "110" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament ASA @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "10" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | 22 | ], 23 | "compatible_printers_condition": "", 24 | "compatible_prints": [], 25 | "compatible_prints_condition": "", 26 | "complete_print_exhaust_fan_speed": [ 27 | "70" 28 | ], 29 | "cool_plate_temp": [ 30 | "0" 31 | ], 32 | "cool_plate_temp_initial_layer": [ 33 | "0" 34 | ], 35 | "default_filament_colour": [ 36 | "" 37 | ], 38 | "during_print_exhaust_fan_speed": [ 39 | "70" 40 | ], 41 | "enable_overhang_bridge_fan": [ 42 | "1" 43 | ], 44 | "enable_pressure_advance": [ 45 | "0" 46 | ], 47 | "eng_plate_temp": [ 48 | "110" 49 | ], 50 | "eng_plate_temp_initial_layer": [ 51 | "110" 52 | ], 53 | "fan_cooling_layer_time": [ 54 | "30" 55 | ], 56 | "fan_max_speed": [ 57 | "100" 58 | ], 59 | "fan_min_speed": [ 60 | "20" 61 | ], 62 | "filament_cost": [ 63 | "24.99" 64 | ], 65 | "filament_density": [ 66 | "1.04" 67 | ], 68 | "filament_deretraction_speed": [ 69 | "nil" 70 | ], 71 | "filament_diameter": [ 72 | "1.75" 73 | ], 74 | "filament_end_gcode": [ 75 | "; filament end gcode \nM106 P3 S0\n" 76 | ], 77 | "filament_flow_ratio": [ 78 | "0.92" 79 | ], 80 | "filament_is_support": [ 81 | "0" 82 | ], 83 | "filament_max_volumetric_speed": [ 84 | "22" 85 | ], 86 | "filament_minimal_purge_on_wipe_tower": [ 87 | "15" 88 | ], 89 | "filament_retract_before_wipe": [ 90 | "nil" 91 | ], 92 | "filament_retract_restart_extra": [ 93 | "nil" 94 | ], 95 | "filament_retract_when_changing_layer": [ 96 | "nil" 97 | ], 98 | "filament_retraction_length": [ 99 | "nil" 100 | ], 101 | "filament_retraction_minimum_travel": [ 102 | "nil" 103 | ], 104 | "filament_retraction_speed": [ 105 | "nil" 106 | ], 107 | "filament_settings_id": [ 108 | "Siddament ASA X1C BIG PARTS" 109 | ], 110 | "filament_soluble": [ 111 | "0" 112 | ], 113 | "filament_start_gcode": [ 114 | "; Filament gcode\n" 115 | ], 116 | "filament_type": [ 117 | "ASA" 118 | ], 119 | "filament_vendor": [ 120 | "Siddament" 121 | ], 122 | "filament_wipe": [ 123 | "nil" 124 | ], 125 | "filament_wipe_distance": [ 126 | "nil" 127 | ], 128 | "filament_z_hop": [ 129 | "nil" 130 | ], 131 | "filament_z_hop_types": [ 132 | "nil" 133 | ], 134 | "from": "", 135 | "full_fan_speed_layer": [ 136 | "0" 137 | ], 138 | "hot_plate_temp": [ 139 | "110" 140 | ], 141 | "hot_plate_temp_initial_layer": [ 142 | "110" 143 | ], 144 | "inherits": "Generic ABS", 145 | "name": "Siddament ASA X1C BIG PARTS", 146 | "nozzle_temperature": [ 147 | "290" 148 | ], 149 | "nozzle_temperature_initial_layer": [ 150 | "280" 151 | ], 152 | "nozzle_temperature_range_high": [ 153 | "280" 154 | ], 155 | "nozzle_temperature_range_low": [ 156 | "240" 157 | ], 158 | "overhang_fan_speed": [ 159 | "100" 160 | ], 161 | "overhang_fan_threshold": [ 162 | "10%" 163 | ], 164 | "pressure_advance": [ 165 | "0.02" 166 | ], 167 | "reduce_fan_stop_start_freq": [ 168 | "1" 169 | ], 170 | "required_nozzle_HRC": [ 171 | "3" 172 | ], 173 | "slow_down_for_layer_cooling": [ 174 | "1" 175 | ], 176 | "slow_down_layer_time": [ 177 | "3" 178 | ], 179 | "slow_down_min_speed": [ 180 | "20" 181 | ], 182 | "temperature_vitrification": [ 183 | "100" 184 | ], 185 | "textured_plate_temp": [ 186 | "110" 187 | ], 188 | "textured_plate_temp_initial_layer": [ 189 | "110" 190 | ], 191 | "version": "1.4.1.4" 192 | } 193 | -------------------------------------------------------------------------------- /filament/Siddament ASA CF @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | "Bambu Lab P1P 0.8 nozzle", 19 | "Bambu Lab P1P 0.4 nozzle", 20 | "Bambu Lab P1P 0.6 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "100" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "100" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "20" 60 | ], 61 | "filament_cost": [ 62 | "39.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.92" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ASA CF P1S BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ASA" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "100" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "100" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ASA CF P1S BIG PARTS", 145 | "nozzle_temperature": [ 146 | "290" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "280" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "100" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "100" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament ASA CF @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "100" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "100" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "20" 60 | ], 61 | "filament_cost": [ 62 | "39.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.92" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament ASA CF X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "ASA" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "100" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "100" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament ASA CF X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "290" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "280" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "100" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "100" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament CF PLA @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "10" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | "Bambu Lab P1P 0.8 nozzle", 19 | "Bambu Lab P1P 0.4 nozzle", 20 | "Bambu Lab P1P 0.6 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "60" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "60" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "0" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "0" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "100" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "100" 60 | ], 61 | "filament_cost": [ 62 | "19.99" 63 | ], 64 | "filament_density": [ 65 | "1.24" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.94" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "35" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament CF PLA P1S BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 114 | ], 115 | "filament_type": [ 116 | "PLA-CF" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "55" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "55" 142 | ], 143 | "inherits": "Generic PLA-CF", 144 | "name": "Siddament CF PLA P1S BIG PARTS", 145 | "nozzle_temperature": [ 146 | "220" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "220" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "240" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "190" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "50%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "40" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "7" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "55" 183 | ], 184 | "textured_plate_temp": [ 185 | "55" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "55" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament CF PLA @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "10" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle", 21 | 22 | ], 23 | "compatible_printers_condition": "", 24 | "compatible_prints": [], 25 | "compatible_prints_condition": "", 26 | "complete_print_exhaust_fan_speed": [ 27 | "70" 28 | ], 29 | "cool_plate_temp": [ 30 | "60" 31 | ], 32 | "cool_plate_temp_initial_layer": [ 33 | "60" 34 | ], 35 | "default_filament_colour": [ 36 | "" 37 | ], 38 | "during_print_exhaust_fan_speed": [ 39 | "70" 40 | ], 41 | "enable_overhang_bridge_fan": [ 42 | "1" 43 | ], 44 | "enable_pressure_advance": [ 45 | "0" 46 | ], 47 | "eng_plate_temp": [ 48 | "0" 49 | ], 50 | "eng_plate_temp_initial_layer": [ 51 | "0" 52 | ], 53 | "fan_cooling_layer_time": [ 54 | "100" 55 | ], 56 | "fan_max_speed": [ 57 | "100" 58 | ], 59 | "fan_min_speed": [ 60 | "100" 61 | ], 62 | "filament_cost": [ 63 | "19.99" 64 | ], 65 | "filament_density": [ 66 | "1.24" 67 | ], 68 | "filament_deretraction_speed": [ 69 | "nil" 70 | ], 71 | "filament_diameter": [ 72 | "1.75" 73 | ], 74 | "filament_end_gcode": [ 75 | "; filament end gcode \nM106 P3 S0\n" 76 | ], 77 | "filament_flow_ratio": [ 78 | "0.94" 79 | ], 80 | "filament_is_support": [ 81 | "0" 82 | ], 83 | "filament_max_volumetric_speed": [ 84 | "35" 85 | ], 86 | "filament_minimal_purge_on_wipe_tower": [ 87 | "15" 88 | ], 89 | "filament_retract_before_wipe": [ 90 | "nil" 91 | ], 92 | "filament_retract_restart_extra": [ 93 | "nil" 94 | ], 95 | "filament_retract_when_changing_layer": [ 96 | "nil" 97 | ], 98 | "filament_retraction_length": [ 99 | "nil" 100 | ], 101 | "filament_retraction_minimum_travel": [ 102 | "nil" 103 | ], 104 | "filament_retraction_speed": [ 105 | "nil" 106 | ], 107 | "filament_settings_id": [ 108 | "Siddament CF PLA X1C BIG PARTS" 109 | ], 110 | "filament_soluble": [ 111 | "0" 112 | ], 113 | "filament_start_gcode": [ 114 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 115 | ], 116 | "filament_type": [ 117 | "PLA-CF" 118 | ], 119 | "filament_vendor": [ 120 | "Siddament" 121 | ], 122 | "filament_wipe": [ 123 | "nil" 124 | ], 125 | "filament_wipe_distance": [ 126 | "nil" 127 | ], 128 | "filament_z_hop": [ 129 | "nil" 130 | ], 131 | "filament_z_hop_types": [ 132 | "nil" 133 | ], 134 | "from": "", 135 | "full_fan_speed_layer": [ 136 | "0" 137 | ], 138 | "hot_plate_temp": [ 139 | "55" 140 | ], 141 | "hot_plate_temp_initial_layer": [ 142 | "55" 143 | ], 144 | "inherits": "Generic PLA-CF", 145 | "name": "Siddament CF PLA X1C BIG PARTS", 146 | "nozzle_temperature": [ 147 | "220" 148 | ], 149 | "nozzle_temperature_initial_layer": [ 150 | "220" 151 | ], 152 | "nozzle_temperature_range_high": [ 153 | "240" 154 | ], 155 | "nozzle_temperature_range_low": [ 156 | "190" 157 | ], 158 | "overhang_fan_speed": [ 159 | "100" 160 | ], 161 | "overhang_fan_threshold": [ 162 | "50%" 163 | ], 164 | "pressure_advance": [ 165 | "0.02" 166 | ], 167 | "reduce_fan_stop_start_freq": [ 168 | "1" 169 | ], 170 | "required_nozzle_HRC": [ 171 | "40" 172 | ], 173 | "slow_down_for_layer_cooling": [ 174 | "1" 175 | ], 176 | "slow_down_layer_time": [ 177 | "7" 178 | ], 179 | "slow_down_min_speed": [ 180 | "20" 181 | ], 182 | "temperature_vitrification": [ 183 | "55" 184 | ], 185 | "textured_plate_temp": [ 186 | "55" 187 | ], 188 | "textured_plate_temp_initial_layer": [ 189 | "55" 190 | ], 191 | "version": "1.4.1.4" 192 | } 193 | -------------------------------------------------------------------------------- /filament/Siddament PCCF @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | ], 19 | "compatible_printers_condition": "", 20 | "compatible_prints": [], 21 | "compatible_prints_condition": "", 22 | "complete_print_exhaust_fan_speed": [ 23 | "70" 24 | ], 25 | "cool_plate_temp": [ 26 | "0" 27 | ], 28 | "cool_plate_temp_initial_layer": [ 29 | "0" 30 | ], 31 | "default_filament_colour": [ 32 | "" 33 | ], 34 | "during_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "enable_overhang_bridge_fan": [ 38 | "1" 39 | ], 40 | "enable_pressure_advance": [ 41 | "0" 42 | ], 43 | "eng_plate_temp": [ 44 | "100" 45 | ], 46 | "eng_plate_temp_initial_layer": [ 47 | "100" 48 | ], 49 | "fan_cooling_layer_time": [ 50 | "30" 51 | ], 52 | "fan_max_speed": [ 53 | "100" 54 | ], 55 | "fan_min_speed": [ 56 | "20" 57 | ], 58 | "filament_cost": [ 59 | "39.99" 60 | ], 61 | "filament_density": [ 62 | "1.04" 63 | ], 64 | "filament_deretraction_speed": [ 65 | "nil" 66 | ], 67 | "filament_diameter": [ 68 | "1.75" 69 | ], 70 | "filament_end_gcode": [ 71 | "; filament end gcode \nM106 P3 S0\n" 72 | ], 73 | "filament_flow_ratio": [ 74 | "0.95" 75 | ], 76 | "filament_is_support": [ 77 | "0" 78 | ], 79 | "filament_max_volumetric_speed": [ 80 | "22" 81 | ], 82 | "filament_minimal_purge_on_wipe_tower": [ 83 | "15" 84 | ], 85 | "filament_retract_before_wipe": [ 86 | "nil" 87 | ], 88 | "filament_retract_restart_extra": [ 89 | "nil" 90 | ], 91 | "filament_retract_when_changing_layer": [ 92 | "nil" 93 | ], 94 | "filament_retraction_length": [ 95 | "nil" 96 | ], 97 | "filament_retraction_minimum_travel": [ 98 | "nil" 99 | ], 100 | "filament_retraction_speed": [ 101 | "nil" 102 | ], 103 | "filament_settings_id": [ 104 | "Siddament PCCF P1S BIG PARTS" 105 | ], 106 | "filament_soluble": [ 107 | "0" 108 | ], 109 | "filament_start_gcode": [ 110 | "; Filament gcode\n" 111 | ], 112 | "filament_type": [ 113 | "PC" 114 | ], 115 | "filament_vendor": [ 116 | "Siddament" 117 | ], 118 | "filament_wipe": [ 119 | "nil" 120 | ], 121 | "filament_wipe_distance": [ 122 | "nil" 123 | ], 124 | "filament_z_hop": [ 125 | "nil" 126 | ], 127 | "filament_z_hop_types": [ 128 | "nil" 129 | ], 130 | "from": "", 131 | "full_fan_speed_layer": [ 132 | "0" 133 | ], 134 | "hot_plate_temp": [ 135 | "100" 136 | ], 137 | "hot_plate_temp_initial_layer": [ 138 | "100" 139 | ], 140 | "inherits": "Generic ABS", 141 | "name": "Siddament PCCF P1S BIG PARTS", 142 | "nozzle_temperature": [ 143 | "270" 144 | ], 145 | "nozzle_temperature_initial_layer": [ 146 | "280" 147 | ], 148 | "nozzle_temperature_range_high": [ 149 | "280" 150 | ], 151 | "nozzle_temperature_range_low": [ 152 | "240" 153 | ], 154 | "overhang_fan_speed": [ 155 | "70" 156 | ], 157 | "overhang_fan_threshold": [ 158 | "10%" 159 | ], 160 | "pressure_advance": [ 161 | "0.02" 162 | ], 163 | "reduce_fan_stop_start_freq": [ 164 | "1" 165 | ], 166 | "required_nozzle_HRC": [ 167 | "3" 168 | ], 169 | "slow_down_for_layer_cooling": [ 170 | "1" 171 | ], 172 | "slow_down_layer_time": [ 173 | "3" 174 | ], 175 | "slow_down_min_speed": [ 176 | "20" 177 | ], 178 | "temperature_vitrification": [ 179 | "100" 180 | ], 181 | "textured_plate_temp": [ 182 | "100" 183 | ], 184 | "textured_plate_temp_initial_layer": [ 185 | "100" 186 | ], 187 | "version": "1.4.1.4" 188 | } 189 | -------------------------------------------------------------------------------- /filament/Siddament PCCF @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "1" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "110" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "110" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "20" 60 | ], 61 | "filament_cost": [ 62 | "39.99" 63 | ], 64 | "filament_density": [ 65 | "1.04" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.95" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament PCCF X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; Filament gcode\n" 114 | ], 115 | "filament_type": [ 116 | "PC" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "110" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "110" 142 | ], 143 | "inherits": "Generic ABS", 144 | "name": "Siddament PCCF X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "270" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "280" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "280" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "240" 156 | ], 157 | "overhang_fan_speed": [ 158 | "70" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "10%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "3" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "100" 183 | ], 184 | "textured_plate_temp": [ 185 | "110" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "110" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament PETG @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle" 18 | ], 19 | "compatible_printers_condition": "", 20 | "compatible_prints": [], 21 | "compatible_prints_condition": "", 22 | "complete_print_exhaust_fan_speed": [ 23 | "70" 24 | ], 25 | "cool_plate_temp": [ 26 | "0" 27 | ], 28 | "cool_plate_temp_initial_layer": [ 29 | "0" 30 | ], 31 | "default_filament_colour": [ 32 | "" 33 | ], 34 | "during_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "enable_overhang_bridge_fan": [ 38 | "1" 39 | ], 40 | "enable_pressure_advance": [ 41 | "0" 42 | ], 43 | "eng_plate_temp": [ 44 | "70" 45 | ], 46 | "eng_plate_temp_initial_layer": [ 47 | "70" 48 | ], 49 | "fan_cooling_layer_time": [ 50 | "30" 51 | ], 52 | "fan_max_speed": [ 53 | "90" 54 | ], 55 | "fan_min_speed": [ 56 | "40" 57 | ], 58 | "filament_cost": [ 59 | "16.99" 60 | ], 61 | "filament_density": [ 62 | "1.27" 63 | ], 64 | "filament_deretraction_speed": [ 65 | "nil" 66 | ], 67 | "filament_diameter": [ 68 | "1.75" 69 | ], 70 | "filament_end_gcode": [ 71 | "; filament end gcode \nM106 P3 S0\n" 72 | ], 73 | "filament_flow_ratio": [ 74 | "0.95" 75 | ], 76 | "filament_is_support": [ 77 | "0" 78 | ], 79 | "filament_max_volumetric_speed": [ 80 | "22" 81 | ], 82 | "filament_minimal_purge_on_wipe_tower": [ 83 | "15" 84 | ], 85 | "filament_retract_before_wipe": [ 86 | "nil" 87 | ], 88 | "filament_retract_restart_extra": [ 89 | "nil" 90 | ], 91 | "filament_retract_when_changing_layer": [ 92 | "nil" 93 | ], 94 | "filament_retraction_length": [ 95 | "nil" 96 | ], 97 | "filament_retraction_minimum_travel": [ 98 | "nil" 99 | ], 100 | "filament_retraction_speed": [ 101 | "nil" 102 | ], 103 | "filament_settings_id": [ 104 | "Siddament PETG P1S BIG PARTS" 105 | ], 106 | "filament_soluble": [ 107 | "0" 108 | ], 109 | "filament_start_gcode": [ 110 | " ; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" 111 | ], 112 | "filament_type": [ 113 | "PETG" 114 | ], 115 | "filament_vendor": [ 116 | "Siddament" 117 | ], 118 | "filament_wipe": [ 119 | "nil" 120 | ], 121 | "filament_wipe_distance": [ 122 | "nil" 123 | ], 124 | "filament_z_hop": [ 125 | "nil" 126 | ], 127 | "filament_z_hop_types": [ 128 | "nil" 129 | ], 130 | "from": "", 131 | "full_fan_speed_layer": [ 132 | "0" 133 | ], 134 | "hot_plate_temp": [ 135 | "70" 136 | ], 137 | "hot_plate_temp_initial_layer": [ 138 | "70" 139 | ], 140 | "inherits": "Generic PETG", 141 | "name": "Siddament PETG P1S BIG PARTS", 142 | "nozzle_temperature": [ 143 | "255" 144 | ], 145 | "nozzle_temperature_initial_layer": [ 146 | "255" 147 | ], 148 | "nozzle_temperature_range_high": [ 149 | "270" 150 | ], 151 | "nozzle_temperature_range_low": [ 152 | "220" 153 | ], 154 | "overhang_fan_speed": [ 155 | "90" 156 | ], 157 | "overhang_fan_threshold": [ 158 | "25%" 159 | ], 160 | "pressure_advance": [ 161 | "0.02" 162 | ], 163 | "reduce_fan_stop_start_freq": [ 164 | "1" 165 | ], 166 | "required_nozzle_HRC": [ 167 | "3" 168 | ], 169 | "slow_down_for_layer_cooling": [ 170 | "1" 171 | ], 172 | "slow_down_layer_time": [ 173 | "8" 174 | ], 175 | "slow_down_min_speed": [ 176 | "20" 177 | ], 178 | "temperature_vitrification": [ 179 | "70" 180 | ], 181 | "textured_plate_temp": [ 182 | "70" 183 | ], 184 | "textured_plate_temp_initial_layer": [ 185 | "70" 186 | ], 187 | "version": "1.4.1.4" 188 | } 189 | -------------------------------------------------------------------------------- /filament/Siddament PETG @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "0" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "0" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "70" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "70" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "30" 54 | ], 55 | "fan_max_speed": [ 56 | "90" 57 | ], 58 | "fan_min_speed": [ 59 | "40" 60 | ], 61 | "filament_cost": [ 62 | "16.99" 63 | ], 64 | "filament_density": [ 65 | "1.27" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.95" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament PETG X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | " ; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" 114 | ], 115 | "filament_type": [ 116 | "PETG" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "70" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "70" 142 | ], 143 | "inherits": "Generic PETG", 144 | "name": "Siddament PETG X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "255" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "255" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "270" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "220" 156 | ], 157 | "overhang_fan_speed": [ 158 | "90" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "25%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "3" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "8" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "70" 183 | ], 184 | "textured_plate_temp": [ 185 | "70" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "70" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament PETG CF @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle", 18 | ], 19 | "compatible_printers_condition": "", 20 | "compatible_prints": [], 21 | "compatible_prints_condition": "", 22 | "complete_print_exhaust_fan_speed": [ 23 | "70" 24 | ], 25 | "cool_plate_temp": [ 26 | "0" 27 | ], 28 | "cool_plate_temp_initial_layer": [ 29 | "0" 30 | ], 31 | "default_filament_colour": [ 32 | "" 33 | ], 34 | "during_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "enable_overhang_bridge_fan": [ 38 | "1" 39 | ], 40 | "enable_pressure_advance": [ 41 | "0" 42 | ], 43 | "eng_plate_temp": [ 44 | "70" 45 | ], 46 | "eng_plate_temp_initial_layer": [ 47 | "70" 48 | ], 49 | "fan_cooling_layer_time": [ 50 | "30" 51 | ], 52 | "fan_max_speed": [ 53 | "90" 54 | ], 55 | "fan_min_speed": [ 56 | "40" 57 | ], 58 | "filament_cost": [ 59 | "21.99" 60 | ], 61 | "filament_density": [ 62 | "1.27" 63 | ], 64 | "filament_deretraction_speed": [ 65 | "nil" 66 | ], 67 | "filament_diameter": [ 68 | "1.75" 69 | ], 70 | "filament_end_gcode": [ 71 | "; filament end gcode \nM106 P3 S0\n" 72 | ], 73 | "filament_flow_ratio": [ 74 | "0.95" 75 | ], 76 | "filament_is_support": [ 77 | "0" 78 | ], 79 | "filament_max_volumetric_speed": [ 80 | "22" 81 | ], 82 | "filament_minimal_purge_on_wipe_tower": [ 83 | "15" 84 | ], 85 | "filament_retract_before_wipe": [ 86 | "nil" 87 | ], 88 | "filament_retract_restart_extra": [ 89 | "nil" 90 | ], 91 | "filament_retract_when_changing_layer": [ 92 | "nil" 93 | ], 94 | "filament_retraction_length": [ 95 | "nil" 96 | ], 97 | "filament_retraction_minimum_travel": [ 98 | "nil" 99 | ], 100 | "filament_retraction_speed": [ 101 | "nil" 102 | ], 103 | "filament_settings_id": [ 104 | "Siddament PETG CF P1S BIG PARTS" 105 | ], 106 | "filament_soluble": [ 107 | "0" 108 | ], 109 | "filament_start_gcode": [ 110 | " ; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" 111 | ], 112 | "filament_type": [ 113 | "PETG-CF" 114 | ], 115 | "filament_vendor": [ 116 | "Siddament" 117 | ], 118 | "filament_wipe": [ 119 | "nil" 120 | ], 121 | "filament_wipe_distance": [ 122 | "nil" 123 | ], 124 | "filament_z_hop": [ 125 | "nil" 126 | ], 127 | "filament_z_hop_types": [ 128 | "nil" 129 | ], 130 | "from": "", 131 | "full_fan_speed_layer": [ 132 | "0" 133 | ], 134 | "hot_plate_temp": [ 135 | "70" 136 | ], 137 | "hot_plate_temp_initial_layer": [ 138 | "70" 139 | ], 140 | "inherits": "Generic PETG", 141 | "name": "Siddament PETG CF P1S BIG PARTS", 142 | "nozzle_temperature": [ 143 | "255" 144 | ], 145 | "nozzle_temperature_initial_layer": [ 146 | "255" 147 | ], 148 | "nozzle_temperature_range_high": [ 149 | "270" 150 | ], 151 | "nozzle_temperature_range_low": [ 152 | "220" 153 | ], 154 | "overhang_fan_speed": [ 155 | "90" 156 | ], 157 | "overhang_fan_threshold": [ 158 | "25%" 159 | ], 160 | "pressure_advance": [ 161 | "0.02" 162 | ], 163 | "reduce_fan_stop_start_freq": [ 164 | "1" 165 | ], 166 | "required_nozzle_HRC": [ 167 | "3" 168 | ], 169 | "slow_down_for_layer_cooling": [ 170 | "1" 171 | ], 172 | "slow_down_layer_time": [ 173 | "8" 174 | ], 175 | "slow_down_min_speed": [ 176 | "20" 177 | ], 178 | "temperature_vitrification": [ 179 | "70" 180 | ], 181 | "textured_plate_temp": [ 182 | "70" 183 | ], 184 | "textured_plate_temp_initial_layer": [ 185 | "70" 186 | ], 187 | "version": "1.4.1.4" 188 | } 189 | -------------------------------------------------------------------------------- /filament/Siddament PETG CF @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "3" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | 22 | ], 23 | "compatible_printers_condition": "", 24 | "compatible_prints": [], 25 | "compatible_prints_condition": "", 26 | "complete_print_exhaust_fan_speed": [ 27 | "70" 28 | ], 29 | "cool_plate_temp": [ 30 | "0" 31 | ], 32 | "cool_plate_temp_initial_layer": [ 33 | "0" 34 | ], 35 | "default_filament_colour": [ 36 | "" 37 | ], 38 | "during_print_exhaust_fan_speed": [ 39 | "70" 40 | ], 41 | "enable_overhang_bridge_fan": [ 42 | "1" 43 | ], 44 | "enable_pressure_advance": [ 45 | "0" 46 | ], 47 | "eng_plate_temp": [ 48 | "70" 49 | ], 50 | "eng_plate_temp_initial_layer": [ 51 | "70" 52 | ], 53 | "fan_cooling_layer_time": [ 54 | "30" 55 | ], 56 | "fan_max_speed": [ 57 | "90" 58 | ], 59 | "fan_min_speed": [ 60 | "40" 61 | ], 62 | "filament_cost": [ 63 | "21.99" 64 | ], 65 | "filament_density": [ 66 | "1.27" 67 | ], 68 | "filament_deretraction_speed": [ 69 | "nil" 70 | ], 71 | "filament_diameter": [ 72 | "1.75" 73 | ], 74 | "filament_end_gcode": [ 75 | "; filament end gcode \nM106 P3 S0\n" 76 | ], 77 | "filament_flow_ratio": [ 78 | "0.95" 79 | ], 80 | "filament_is_support": [ 81 | "0" 82 | ], 83 | "filament_max_volumetric_speed": [ 84 | "22" 85 | ], 86 | "filament_minimal_purge_on_wipe_tower": [ 87 | "15" 88 | ], 89 | "filament_retract_before_wipe": [ 90 | "nil" 91 | ], 92 | "filament_retract_restart_extra": [ 93 | "nil" 94 | ], 95 | "filament_retract_when_changing_layer": [ 96 | "nil" 97 | ], 98 | "filament_retraction_length": [ 99 | "nil" 100 | ], 101 | "filament_retraction_minimum_travel": [ 102 | "nil" 103 | ], 104 | "filament_retraction_speed": [ 105 | "nil" 106 | ], 107 | "filament_settings_id": [ 108 | "Siddament PETG CF X1C BIG PARTS" 109 | ], 110 | "filament_soluble": [ 111 | "0" 112 | ], 113 | "filament_start_gcode": [ 114 | " ; filament start gcode\n{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{endif}" 115 | ], 116 | "filament_type": [ 117 | "PETG-CF" 118 | ], 119 | "filament_vendor": [ 120 | "Siddament" 121 | ], 122 | "filament_wipe": [ 123 | "nil" 124 | ], 125 | "filament_wipe_distance": [ 126 | "nil" 127 | ], 128 | "filament_z_hop": [ 129 | "nil" 130 | ], 131 | "filament_z_hop_types": [ 132 | "nil" 133 | ], 134 | "from": "", 135 | "full_fan_speed_layer": [ 136 | "0" 137 | ], 138 | "hot_plate_temp": [ 139 | "70" 140 | ], 141 | "hot_plate_temp_initial_layer": [ 142 | "70" 143 | ], 144 | "inherits": "Generic PETG", 145 | "name": "Siddament PETG CF X1C BIG PARTS", 146 | "nozzle_temperature": [ 147 | "255" 148 | ], 149 | "nozzle_temperature_initial_layer": [ 150 | "255" 151 | ], 152 | "nozzle_temperature_range_high": [ 153 | "270" 154 | ], 155 | "nozzle_temperature_range_low": [ 156 | "220" 157 | ], 158 | "overhang_fan_speed": [ 159 | "90" 160 | ], 161 | "overhang_fan_threshold": [ 162 | "25%" 163 | ], 164 | "pressure_advance": [ 165 | "0.02" 166 | ], 167 | "reduce_fan_stop_start_freq": [ 168 | "1" 169 | ], 170 | "required_nozzle_HRC": [ 171 | "3" 172 | ], 173 | "slow_down_for_layer_cooling": [ 174 | "1" 175 | ], 176 | "slow_down_layer_time": [ 177 | "8" 178 | ], 179 | "slow_down_min_speed": [ 180 | "20" 181 | ], 182 | "temperature_vitrification": [ 183 | "70" 184 | ], 185 | "textured_plate_temp": [ 186 | "70" 187 | ], 188 | "textured_plate_temp_initial_layer": [ 189 | "70" 190 | ], 191 | "version": "1.4.1.4" 192 | } 193 | -------------------------------------------------------------------------------- /filament/Siddament PLA @P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab P1S 0.8 nozzle", 16 | "Bambu Lab P1S 0.4 nozzle", 17 | "Bambu Lab P1S 0.6 nozzle" 18 | ], 19 | "compatible_printers_condition": "", 20 | "compatible_prints": [], 21 | "compatible_prints_condition": "", 22 | "complete_print_exhaust_fan_speed": [ 23 | "70" 24 | ], 25 | "cool_plate_temp": [ 26 | "60" 27 | ], 28 | "cool_plate_temp_initial_layer": [ 29 | "60" 30 | ], 31 | "default_filament_colour": [ 32 | "" 33 | ], 34 | "during_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "enable_overhang_bridge_fan": [ 38 | "1" 39 | ], 40 | "enable_pressure_advance": [ 41 | "0" 42 | ], 43 | "eng_plate_temp": [ 44 | "0" 45 | ], 46 | "eng_plate_temp_initial_layer": [ 47 | "0" 48 | ], 49 | "fan_cooling_layer_time": [ 50 | "100" 51 | ], 52 | "fan_max_speed": [ 53 | "100" 54 | ], 55 | "fan_min_speed": [ 56 | "100" 57 | ], 58 | "filament_cost": [ 59 | "17.99" 60 | ], 61 | "filament_density": [ 62 | "1.24" 63 | ], 64 | "filament_deretraction_speed": [ 65 | "nil" 66 | ], 67 | "filament_diameter": [ 68 | "1.75" 69 | ], 70 | "filament_end_gcode": [ 71 | "; filament end gcode \nM106 P3 S0\n" 72 | ], 73 | "filament_flow_ratio": [ 74 | "0.95" 75 | ], 76 | "filament_is_support": [ 77 | "0" 78 | ], 79 | "filament_max_volumetric_speed": [ 80 | "22" 81 | ], 82 | "filament_minimal_purge_on_wipe_tower": [ 83 | "15" 84 | ], 85 | "filament_retract_before_wipe": [ 86 | "nil" 87 | ], 88 | "filament_retract_restart_extra": [ 89 | "nil" 90 | ], 91 | "filament_retract_when_changing_layer": [ 92 | "nil" 93 | ], 94 | "filament_retraction_length": [ 95 | "nil" 96 | ], 97 | "filament_retraction_minimum_travel": [ 98 | "nil" 99 | ], 100 | "filament_retraction_speed": [ 101 | "nil" 102 | ], 103 | "filament_settings_id": [ 104 | "Siddament PLA P1S BIG PARTS" 105 | ], 106 | "filament_soluble": [ 107 | "0" 108 | ], 109 | "filament_start_gcode": [ 110 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 111 | ], 112 | "filament_type": [ 113 | "PLA" 114 | ], 115 | "filament_vendor": [ 116 | "Siddament" 117 | ], 118 | "filament_wipe": [ 119 | "nil" 120 | ], 121 | "filament_wipe_distance": [ 122 | "nil" 123 | ], 124 | "filament_z_hop": [ 125 | "nil" 126 | ], 127 | "filament_z_hop_types": [ 128 | "nil" 129 | ], 130 | "from": "", 131 | "full_fan_speed_layer": [ 132 | "0" 133 | ], 134 | "hot_plate_temp": [ 135 | "55" 136 | ], 137 | "hot_plate_temp_initial_layer": [ 138 | "55" 139 | ], 140 | "inherits": "Generic PLA-CF", 141 | "name": "Siddament PLA P1S BIG PARTS", 142 | "nozzle_temperature": [ 143 | "220" 144 | ], 145 | "nozzle_temperature_initial_layer": [ 146 | "220" 147 | ], 148 | "nozzle_temperature_range_high": [ 149 | "240" 150 | ], 151 | "nozzle_temperature_range_low": [ 152 | "190" 153 | ], 154 | "overhang_fan_speed": [ 155 | "100" 156 | ], 157 | "overhang_fan_threshold": [ 158 | "50%" 159 | ], 160 | "pressure_advance": [ 161 | "0.02" 162 | ], 163 | "reduce_fan_stop_start_freq": [ 164 | "1" 165 | ], 166 | "required_nozzle_HRC": [ 167 | "40" 168 | ], 169 | "slow_down_for_layer_cooling": [ 170 | "1" 171 | ], 172 | "slow_down_layer_time": [ 173 | "7" 174 | ], 175 | "slow_down_min_speed": [ 176 | "20" 177 | ], 178 | "temperature_vitrification": [ 179 | "55" 180 | ], 181 | "textured_plate_temp": [ 182 | "55" 183 | ], 184 | "textured_plate_temp_initial_layer": [ 185 | "55" 186 | ], 187 | "version": "1.4.1.4" 188 | } 189 | -------------------------------------------------------------------------------- /filament/Siddament PLA @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "0" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle" 21 | ], 22 | "compatible_printers_condition": "", 23 | "compatible_prints": [], 24 | "compatible_prints_condition": "", 25 | "complete_print_exhaust_fan_speed": [ 26 | "70" 27 | ], 28 | "cool_plate_temp": [ 29 | "60" 30 | ], 31 | "cool_plate_temp_initial_layer": [ 32 | "60" 33 | ], 34 | "default_filament_colour": [ 35 | "" 36 | ], 37 | "during_print_exhaust_fan_speed": [ 38 | "70" 39 | ], 40 | "enable_overhang_bridge_fan": [ 41 | "1" 42 | ], 43 | "enable_pressure_advance": [ 44 | "0" 45 | ], 46 | "eng_plate_temp": [ 47 | "0" 48 | ], 49 | "eng_plate_temp_initial_layer": [ 50 | "0" 51 | ], 52 | "fan_cooling_layer_time": [ 53 | "100" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "100" 60 | ], 61 | "filament_cost": [ 62 | "17.99" 63 | ], 64 | "filament_density": [ 65 | "1.24" 66 | ], 67 | "filament_deretraction_speed": [ 68 | "nil" 69 | ], 70 | "filament_diameter": [ 71 | "1.75" 72 | ], 73 | "filament_end_gcode": [ 74 | "; filament end gcode \nM106 P3 S0\n" 75 | ], 76 | "filament_flow_ratio": [ 77 | "0.95" 78 | ], 79 | "filament_is_support": [ 80 | "0" 81 | ], 82 | "filament_max_volumetric_speed": [ 83 | "22" 84 | ], 85 | "filament_minimal_purge_on_wipe_tower": [ 86 | "15" 87 | ], 88 | "filament_retract_before_wipe": [ 89 | "nil" 90 | ], 91 | "filament_retract_restart_extra": [ 92 | "nil" 93 | ], 94 | "filament_retract_when_changing_layer": [ 95 | "nil" 96 | ], 97 | "filament_retraction_length": [ 98 | "nil" 99 | ], 100 | "filament_retraction_minimum_travel": [ 101 | "nil" 102 | ], 103 | "filament_retraction_speed": [ 104 | "nil" 105 | ], 106 | "filament_settings_id": [ 107 | "Siddament PLA X1C BIG PARTS" 108 | ], 109 | "filament_soluble": [ 110 | "0" 111 | ], 112 | "filament_start_gcode": [ 113 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 114 | ], 115 | "filament_type": [ 116 | "PLA" 117 | ], 118 | "filament_vendor": [ 119 | "Siddament" 120 | ], 121 | "filament_wipe": [ 122 | "nil" 123 | ], 124 | "filament_wipe_distance": [ 125 | "nil" 126 | ], 127 | "filament_z_hop": [ 128 | "nil" 129 | ], 130 | "filament_z_hop_types": [ 131 | "nil" 132 | ], 133 | "from": "", 134 | "full_fan_speed_layer": [ 135 | "0" 136 | ], 137 | "hot_plate_temp": [ 138 | "55" 139 | ], 140 | "hot_plate_temp_initial_layer": [ 141 | "55" 142 | ], 143 | "inherits": "Generic PLA-CF", 144 | "name": "Siddament PLA X1C BIG PARTS", 145 | "nozzle_temperature": [ 146 | "220" 147 | ], 148 | "nozzle_temperature_initial_layer": [ 149 | "220" 150 | ], 151 | "nozzle_temperature_range_high": [ 152 | "240" 153 | ], 154 | "nozzle_temperature_range_low": [ 155 | "190" 156 | ], 157 | "overhang_fan_speed": [ 158 | "100" 159 | ], 160 | "overhang_fan_threshold": [ 161 | "50%" 162 | ], 163 | "pressure_advance": [ 164 | "0.02" 165 | ], 166 | "reduce_fan_stop_start_freq": [ 167 | "1" 168 | ], 169 | "required_nozzle_HRC": [ 170 | "40" 171 | ], 172 | "slow_down_for_layer_cooling": [ 173 | "1" 174 | ], 175 | "slow_down_layer_time": [ 176 | "7" 177 | ], 178 | "slow_down_min_speed": [ 179 | "20" 180 | ], 181 | "temperature_vitrification": [ 182 | "55" 183 | ], 184 | "textured_plate_temp": [ 185 | "55" 186 | ], 187 | "textured_plate_temp_initial_layer": [ 188 | "55" 189 | ], 190 | "version": "1.4.1.4" 191 | } 192 | -------------------------------------------------------------------------------- /filament/Siddament Silk PLA @X1C .json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "80" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab A1 mini 0.4 nozzle", 18 | "Bambu Lab A1 mini 0.6 nozzle", 19 | "Bambu Lab A1 mini 0.8 nozzle", 20 | "Bambu Lab X1 Carbon 0.6 nozzle", 21 | "Bambu Lab X1 Carbon 0.8 nozzle", 22 | "Bambu Lab X1 0.6 nozzle", 23 | "Bambu Lab X1 0.8 nozzle", 24 | "Bambu Lab P1S 0.8 nozzle", 25 | "Bambu Lab P1S 0.4 nozzle", 26 | "Bambu Lab P1S 0.6 nozzle", 27 | "Bambu Lab P1P 0.8 nozzle", 28 | "Bambu Lab P1P 0.4 nozzle", 29 | "Bambu Lab P1P 0.6 nozzle" 30 | ], 31 | "compatible_printers_condition": "", 32 | "compatible_prints": [], 33 | "compatible_prints_condition": "", 34 | "complete_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "cool_plate_temp": [ 38 | "60" 39 | ], 40 | "cool_plate_temp_initial_layer": [ 41 | "60" 42 | ], 43 | "default_filament_colour": [ 44 | "" 45 | ], 46 | "during_print_exhaust_fan_speed": [ 47 | "70" 48 | ], 49 | "enable_overhang_bridge_fan": [ 50 | "1" 51 | ], 52 | "enable_pressure_advance": [ 53 | "0" 54 | ], 55 | "eng_plate_temp": [ 56 | "0" 57 | ], 58 | "eng_plate_temp_initial_layer": [ 59 | "0" 60 | ], 61 | "fan_cooling_layer_time": [ 62 | "100" 63 | ], 64 | "fan_max_speed": [ 65 | "100" 66 | ], 67 | "fan_min_speed": [ 68 | "100" 69 | ], 70 | "filament_cost": [ 71 | "21.99" 72 | ], 73 | "filament_density": [ 74 | "1.24" 75 | ], 76 | "filament_deretraction_speed": [ 77 | "nil" 78 | ], 79 | "filament_diameter": [ 80 | "1.75" 81 | ], 82 | "filament_end_gcode": [ 83 | "; filament end gcode \nM106 P3 S0\n" 84 | ], 85 | "filament_flow_ratio": [ 86 | "0.96" 87 | ], 88 | "filament_is_support": [ 89 | "0" 90 | ], 91 | "filament_max_volumetric_speed": [ 92 | "19" 93 | ], 94 | "filament_minimal_purge_on_wipe_tower": [ 95 | "15" 96 | ], 97 | "filament_retract_before_wipe": [ 98 | "nil" 99 | ], 100 | "filament_retract_restart_extra": [ 101 | "nil" 102 | ], 103 | "filament_retract_when_changing_layer": [ 104 | "nil" 105 | ], 106 | "filament_retraction_length": [ 107 | "nil" 108 | ], 109 | "filament_retraction_minimum_travel": [ 110 | "nil" 111 | ], 112 | "filament_retraction_speed": [ 113 | "nil" 114 | ], 115 | "filament_settings_id": [ 116 | "Siddament Silk PLA " 117 | ], 118 | "filament_soluble": [ 119 | "0" 120 | ], 121 | "filament_start_gcode": [ 122 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 123 | ], 124 | "filament_type": [ 125 | "PLA" 126 | ], 127 | "filament_vendor": [ 128 | "Siddament" 129 | ], 130 | "filament_wipe": [ 131 | "nil" 132 | ], 133 | "filament_wipe_distance": [ 134 | "nil" 135 | ], 136 | "filament_z_hop": [ 137 | "nil" 138 | ], 139 | "filament_z_hop_types": [ 140 | "nil" 141 | ], 142 | "from": "", 143 | "full_fan_speed_layer": [ 144 | "0" 145 | ], 146 | "hot_plate_temp": [ 147 | "55" 148 | ], 149 | "hot_plate_temp_initial_layer": [ 150 | "55" 151 | ], 152 | "inherits": "Generic PLA-CF", 153 | "name": "Siddament Silk PLA ", 154 | "nozzle_temperature": [ 155 | "225" 156 | ], 157 | "nozzle_temperature_initial_layer": [ 158 | "225" 159 | ], 160 | "nozzle_temperature_range_high": [ 161 | "240" 162 | ], 163 | "nozzle_temperature_range_low": [ 164 | "190" 165 | ], 166 | "overhang_fan_speed": [ 167 | "100" 168 | ], 169 | "overhang_fan_threshold": [ 170 | "50%" 171 | ], 172 | "pressure_advance": [ 173 | "0.02" 174 | ], 175 | "reduce_fan_stop_start_freq": [ 176 | "1" 177 | ], 178 | "required_nozzle_HRC": [ 179 | "40" 180 | ], 181 | "slow_down_for_layer_cooling": [ 182 | "1" 183 | ], 184 | "slow_down_layer_time": [ 185 | "7" 186 | ], 187 | "slow_down_min_speed": [ 188 | "20" 189 | ], 190 | "temperature_vitrification": [ 191 | "55" 192 | ], 193 | "textured_plate_temp": [ 194 | "55" 195 | ], 196 | "textured_plate_temp_initial_layer": [ 197 | "55" 198 | ], 199 | "version": "1.4.1.4" 200 | } 201 | -------------------------------------------------------------------------------- /filament/Siddament TPU @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "activate_air_filtration": [ 3 | "0" 4 | ], 5 | "additional_cooling_fan_speed": [ 6 | "70" 7 | ], 8 | "chamber_temperatures": [ 9 | "0" 10 | ], 11 | "close_fan_the_first_x_layers": [ 12 | "1" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab A1 mini 0.4 nozzle", 18 | "Bambu Lab A1 mini 0.6 nozzle", 19 | "Bambu Lab A1 mini 0.8 nozzle", 20 | "Bambu Lab X1 Carbon 0.6 nozzle", 21 | "Bambu Lab X1 Carbon 0.8 nozzle", 22 | "Bambu Lab X1 0.6 nozzle", 23 | "Bambu Lab X1 0.8 nozzle", 24 | "Bambu Lab P1S 0.8 nozzle", 25 | "Bambu Lab P1S 0.4 nozzle", 26 | "Bambu Lab P1S 0.6 nozzle", 27 | "Bambu Lab P1P 0.8 nozzle", 28 | "Bambu Lab P1P 0.4 nozzle", 29 | "Bambu Lab P1P 0.6 nozzle" 30 | ], 31 | "compatible_printers_condition": "", 32 | "compatible_prints": [], 33 | "compatible_prints_condition": "", 34 | "complete_print_exhaust_fan_speed": [ 35 | "70" 36 | ], 37 | "cool_plate_temp": [ 38 | "30" 39 | ], 40 | "cool_plate_temp_initial_layer": [ 41 | "30" 42 | ], 43 | "default_filament_colour": [ 44 | "" 45 | ], 46 | "during_print_exhaust_fan_speed": [ 47 | "70" 48 | ], 49 | "enable_overhang_bridge_fan": [ 50 | "1" 51 | ], 52 | "enable_pressure_advance": [ 53 | "0" 54 | ], 55 | "eng_plate_temp": [ 56 | "30" 57 | ], 58 | "eng_plate_temp_initial_layer": [ 59 | "30" 60 | ], 61 | "fan_cooling_layer_time": [ 62 | "100" 63 | ], 64 | "fan_max_speed": [ 65 | "100" 66 | ], 67 | "fan_min_speed": [ 68 | "100" 69 | ], 70 | "filament_cost": [ 71 | "24.99" 72 | ], 73 | "filament_density": [ 74 | "1.24" 75 | ], 76 | "filament_deretraction_speed": [ 77 | "nil" 78 | ], 79 | "filament_diameter": [ 80 | "1.75" 81 | ], 82 | "filament_end_gcode": [ 83 | "; filament end gcode \nM106 P3 S0\n" 84 | ], 85 | "filament_flow_ratio": [ 86 | "1" 87 | ], 88 | "filament_is_support": [ 89 | "0" 90 | ], 91 | "filament_max_volumetric_speed": [ 92 | "10" 93 | ], 94 | "filament_minimal_purge_on_wipe_tower": [ 95 | "15" 96 | ], 97 | "filament_retract_before_wipe": [ 98 | "nil" 99 | ], 100 | "filament_retract_restart_extra": [ 101 | "nil" 102 | ], 103 | "filament_retract_when_changing_layer": [ 104 | "nil" 105 | ], 106 | "filament_retraction_length": [ 107 | "0.4" 108 | ], 109 | "filament_retraction_minimum_travel": [ 110 | "nil" 111 | ], 112 | "filament_retraction_speed": [ 113 | "nil" 114 | ], 115 | "filament_settings_id": [ 116 | "Siddament TPU" 117 | ], 118 | "filament_soluble": [ 119 | "0" 120 | ], 121 | "filament_start_gcode": [ 122 | "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" 123 | ], 124 | "filament_type": [ 125 | "TPU" 126 | ], 127 | "filament_vendor": [ 128 | "Siddament" 129 | ], 130 | "filament_wipe": [ 131 | "nil" 132 | ], 133 | "filament_wipe_distance": [ 134 | "nil" 135 | ], 136 | "filament_z_hop": [ 137 | "nil" 138 | ], 139 | "filament_z_hop_types": [ 140 | "nil" 141 | ], 142 | "from": "", 143 | "full_fan_speed_layer": [ 144 | "0" 145 | ], 146 | "hot_plate_temp": [ 147 | "35" 148 | ], 149 | "hot_plate_temp_initial_layer": [ 150 | "35" 151 | ], 152 | "inherits": "Generic TPU", 153 | "name": "Siddament TPU", 154 | "nozzle_temperature": [ 155 | "240" 156 | ], 157 | "nozzle_temperature_initial_layer": [ 158 | "240" 159 | ], 160 | "nozzle_temperature_range_high": [ 161 | "250" 162 | ], 163 | "nozzle_temperature_range_low": [ 164 | "200" 165 | ], 166 | "overhang_fan_speed": [ 167 | "100" 168 | ], 169 | "overhang_fan_threshold": [ 170 | "95%" 171 | ], 172 | "pressure_advance": [ 173 | "0.02" 174 | ], 175 | "reduce_fan_stop_start_freq": [ 176 | "1" 177 | ], 178 | "required_nozzle_HRC": [ 179 | "3" 180 | ], 181 | "slow_down_for_layer_cooling": [ 182 | "1" 183 | ], 184 | "slow_down_layer_time": [ 185 | "8" 186 | ], 187 | "slow_down_min_speed": [ 188 | "10" 189 | ], 190 | "temperature_vitrification": [ 191 | "35" 192 | ], 193 | "textured_plate_temp": [ 194 | "35" 195 | ], 196 | "textured_plate_temp_initial_layer": [ 197 | "35" 198 | ], 199 | "version": "1.5.0.19" 200 | } 201 | -------------------------------------------------------------------------------- /filament/Sunlu PETG Black.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#1D1D1D" 4 | ], 5 | "eng_plate_temp": [ 6 | "65" 7 | ], 8 | "eng_plate_temp_initial_layer": [ 9 | "65" 10 | ], 11 | "fan_max_speed": [ 12 | "70" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.98" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "16" 19 | ], 20 | "filament_retract_before_wipe": [ 21 | "85%" 22 | ], 23 | "filament_settings_id": [ 24 | "PETG Sunlu Black - OAB 23.08.10" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 50% for PETG. Increase to S255 if you run your ; printer in a hot environment.\nM106 P3 S127" 28 | ], 29 | "filament_vendor": [ 30 | "Sunlu" 31 | ], 32 | "from": "User", 33 | "hot_plate_temp": [ 34 | "65" 35 | ], 36 | "hot_plate_temp_initial_layer": [ 37 | "65" 38 | ], 39 | "inherits": "Generic PETG", 40 | "name": "Sunlu PETG Black", 41 | "nozzle_temperature": [ 42 | "265" 43 | ], 44 | "nozzle_temperature_initial_layer": [ 45 | "265" 46 | ], 47 | "nozzle_temperature_range_high": [ 48 | "280" 49 | ], 50 | "overhang_fan_speed": [ 51 | "85" 52 | ], 53 | "slow_down_layer_time": [ 54 | "2" 55 | ], 56 | "temperature_vitrification": [ 57 | "75" 58 | ], 59 | "textured_plate_temp": [ 60 | "65" 61 | ], 62 | "textured_plate_temp_initial_layer": [ 63 | "65" 64 | ], 65 | "version": "1.3.0.13" 66 | } 67 | -------------------------------------------------------------------------------- /filament/Sunlu PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "eng_plate_temp": [ 3 | "65" 4 | ], 5 | "eng_plate_temp_initial_layer": [ 6 | "65" 7 | ], 8 | "fan_max_speed": [ 9 | "70" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.913" 13 | ], 14 | "filament_max_volumetric_speed": [ 15 | "16" 16 | ], 17 | "filament_retract_before_wipe": [ 18 | "85%" 19 | ], 20 | "filament_settings_id": [ 21 | "PETG Sunlu - OAB 23.06.11" 22 | ], 23 | "filament_start_gcode": [ 24 | "; chamber fan speed 50% for PETG. Increase to S255 if you run your ; printer in a hot environment.\nM106 P3 S127" 25 | ], 26 | "from": "User", 27 | "hot_plate_temp": [ 28 | "65" 29 | ], 30 | "hot_plate_temp_initial_layer": [ 31 | "65" 32 | ], 33 | "inherits": "Generic PETG", 34 | "name": "Sunlu PETG", 35 | "nozzle_temperature": [ 36 | "265" 37 | ], 38 | "nozzle_temperature_initial_layer": [ 39 | "265" 40 | ], 41 | "nozzle_temperature_range_high": [ 42 | "280" 43 | ], 44 | "overhang_fan_speed": [ 45 | "85" 46 | ], 47 | "slow_down_layer_time": [ 48 | "2" 49 | ], 50 | "temperature_vitrification": [ 51 | "75" 52 | ], 53 | "textured_plate_temp": [ 54 | "65" 55 | ], 56 | "textured_plate_temp_initial_layer": [ 57 | "65" 58 | ], 59 | "version": "1.3.0.13" 60 | } 61 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#252525" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.999" 7 | ], 8 | "filament_settings_id": [ 9 | "Sunlu PLA+ Black @X1C" 10 | ], 11 | "filament_vendor": [ 12 | "Sunlu" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "is_custom_defined": "0", 17 | "name": "Sunlu PLA+ Black @X1C", 18 | "nozzle_temperature": [ 19 | "210" 20 | ], 21 | "nozzle_temperature_initial_layer": [ 22 | "210" 23 | ], 24 | "nozzle_temperature_range_high": [ 25 | "215" 26 | ], 27 | "nozzle_temperature_range_low": [ 28 | "205" 29 | ], 30 | "version": "1.7.0.18" 31 | } 32 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ Gold @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#808000" 4 | ], 5 | "enable_pressure_advance": [ 6 | "1" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.058" 10 | ], 11 | "filament_settings_id": [ 12 | "Sunlu PLA+ Gold @X1C" 13 | ], 14 | "filament_vendor": [ 15 | "Sunlu" 16 | ], 17 | "from": "User", 18 | "hot_plate_temp": [ 19 | "42" 20 | ], 21 | "hot_plate_temp_initial_layer": [ 22 | "42" 23 | ], 24 | "inherits": "Generic PLA", 25 | "is_custom_defined": "0", 26 | "name": "Sunlu PLA+ Gold @X1C", 27 | "nozzle_temperature": [ 28 | "210" 29 | ], 30 | "nozzle_temperature_initial_layer": [ 31 | "210" 32 | ], 33 | "nozzle_temperature_range_high": [ 34 | "215" 35 | ], 36 | "nozzle_temperature_range_low": [ 37 | "205" 38 | ], 39 | "pressure_advance": [ 40 | "0.044" 41 | ], 42 | "version": "1.7.0.18" 43 | } 44 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ Gold.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#808000" 4 | ], 5 | "enable_pressure_advance": [ 6 | "1" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.058" 10 | ], 11 | "filament_settings_id": [ 12 | "Sunlu PLA+ Gold" 13 | ], 14 | "filament_vendor": [ 15 | "Sunlu" 16 | ], 17 | "from": "User", 18 | "inherits": "Generic PLA", 19 | "is_custom_defined": "0", 20 | "name": "Sunlu PLA+ Gold", 21 | "nozzle_temperature": [ 22 | "210" 23 | ], 24 | "nozzle_temperature_initial_layer": [ 25 | "210" 26 | ], 27 | "nozzle_temperature_range_high": [ 28 | "215" 29 | ], 30 | "nozzle_temperature_range_low": [ 31 | "205" 32 | ], 33 | "pressure_advance": [ 34 | "0.044" 35 | ], 36 | "version": "1.7.0.18" 37 | } 38 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ Green @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#20FF20" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.954" 7 | ], 8 | "filament_settings_id": [ 9 | "Sunlu PLA+ Green @X1C" 10 | ], 11 | "filament_vendor": [ 12 | "Sunlu" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "Sunlu PLA+ Green @X1C", 17 | "nozzle_temperature": [ 18 | "235" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "235" 22 | ], 23 | "version": "1.7.0.12" 24 | } 25 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.975" 7 | ], 8 | "filament_settings_id": [ 9 | "Sunlu PLA+ White @X1C" 10 | ], 11 | "filament_vendor": [ 12 | "Sunlu" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "is_custom_defined": "0", 17 | "name": "Sunlu PLA+ White @X1C", 18 | "nozzle_temperature": [ 19 | "210" 20 | ], 21 | "nozzle_temperature_initial_layer": [ 22 | "210" 23 | ], 24 | "nozzle_temperature_range_high": [ 25 | "215" 26 | ], 27 | "nozzle_temperature_range_low": [ 28 | "205" 29 | ], 30 | "version": "1.7.0.18" 31 | } 32 | -------------------------------------------------------------------------------- /filament/Sunlu PLA+ White.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.975" 7 | ], 8 | "filament_settings_id": [ 9 | "Sunlu PLA+ White" 10 | ], 11 | "filament_vendor": [ 12 | "Sunlu" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "is_custom_defined": "0", 17 | "name": "Sunlu PLA+ White", 18 | "nozzle_temperature": [ 19 | "210" 20 | ], 21 | "nozzle_temperature_initial_layer": [ 22 | "210" 23 | ], 24 | "nozzle_temperature_range_high": [ 25 | "215" 26 | ], 27 | "nozzle_temperature_range_low": [ 28 | "205" 29 | ], 30 | "version": "1.7.0.18" 31 | } 32 | -------------------------------------------------------------------------------- /filament/eSUN PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "eng_plate_temp": [ 3 | "65" 4 | ], 5 | "eng_plate_temp_initial_layer": [ 6 | "65" 7 | ], 8 | "fan_max_speed": [ 9 | "70" 10 | ], 11 | "filament_cost": [ 12 | "25" 13 | ], 14 | "filament_flow_ratio": [ 15 | "0.976" 16 | ], 17 | "filament_max_volumetric_speed": [ 18 | "16" 19 | ], 20 | "filament_retract_before_wipe": [ 21 | "85%" 22 | ], 23 | "filament_settings_id": [ 24 | "PETG eSun - OAB 23.06.11" 25 | ], 26 | "filament_start_gcode": [ 27 | "; chamber fan speed 50% for PETG. Increase to S255 if you run your ; printer in a hot environment.\nM106 P3 S127" 28 | ], 29 | "from": "User", 30 | "hot_plate_temp": [ 31 | "65" 32 | ], 33 | "hot_plate_temp_initial_layer": [ 34 | "65" 35 | ], 36 | "inherits": "Generic PETG", 37 | "name": "eSUN PETG", 38 | "nozzle_temperature": [ 39 | "265" 40 | ], 41 | "nozzle_temperature_initial_layer": [ 42 | "265" 43 | ], 44 | "nozzle_temperature_range_high": [ 45 | "280" 46 | ], 47 | "overhang_fan_speed": [ 48 | "85" 49 | ], 50 | "slow_down_layer_time": [ 51 | "2" 52 | ], 53 | "temperature_vitrification": [ 54 | "75" 55 | ], 56 | "textured_plate_temp": [ 57 | "65" 58 | ], 59 | "textured_plate_temp_initial_layer": [ 60 | "65" 61 | ], 62 | "version": "1.3.0.13" 63 | } 64 | -------------------------------------------------------------------------------- /filament/eSUN PLA Wood @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFDC64" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.982" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "eSUN PLA Wood @X1C" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "eSUN" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Generic PLA", 31 | "name": "eSUN PLA Wood @X1C", 32 | "nozzle_temperature_range_high": [ 33 | "230" 34 | ], 35 | "nozzle_temperature_range_low": [ 36 | "210" 37 | ], 38 | "slow_down_layer_time": [ 39 | "2" 40 | ], 41 | "temperature_vitrification": [ 42 | "60" 43 | ], 44 | "textured_plate_temp": [ 45 | "60" 46 | ], 47 | "textured_plate_temp_initial_layer": [ 48 | "60" 49 | ], 50 | "version": "1.4.1.1" 51 | } 52 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#101010" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.99" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN PLA+ Black" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSUN PLA+ Black", 14 | "nozzle_temperature": [ 15 | "235" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "235" 19 | ], 20 | "version": "1.7.0.12" 21 | } 22 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ Blue @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#0000FF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.984" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN PLA+ Blue" 10 | ], 11 | "filament_vendor": [ 12 | "eSUN" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "eSUN PLA+ Blue", 17 | "nozzle_temperature_initial_layer": [ 18 | "225" 19 | ], 20 | "nozzle_temperature_range_high": [ 21 | "225" 22 | ], 23 | "nozzle_temperature_range_low": [ 24 | "205" 25 | ], 26 | "version": "1.7.0.18" 27 | } 28 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ F-Silver @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#808080" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.009" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN PLA+ F-Silver" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSUN PLA+ F-Silver", 14 | "nozzle_temperature": [ 15 | "225" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "225" 19 | ], 20 | "nozzle_temperature_range_high": [ 21 | "230" 22 | ], 23 | "nozzle_temperature_range_low": [ 24 | "210" 25 | ], 26 | "version": "1.7.0.12" 27 | } 28 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ Firetruck Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#AA0000" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.95" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN PLA+ Firetruck Red" 10 | ], 11 | "filament_vendor": [ 12 | "eSUN" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "name": "eSUN PLA+ Firetruck Red", 17 | "version": "1.7.0.12" 18 | } 19 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ Light Blue @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#0CD0E7" 4 | ], 5 | "filament_settings_id": [ 6 | "eSUN PLA+ Light Blue" 7 | ], 8 | "filament_vendor": [ 9 | "eSUN" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSUN PLA+ Light Blue", 14 | "nozzle_temperature_initial_layer": [ 15 | "225" 16 | ], 17 | "nozzle_temperature_range_high": [ 18 | "230" 19 | ], 20 | "nozzle_temperature_range_low": [ 21 | "210" 22 | ], 23 | "version": "1.7.0.18" 24 | } 25 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ Purple @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#8000FF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.013" 7 | ], 8 | "filament_max_volumetric_speed": [ 9 | "20" 10 | ], 11 | "filament_settings_id": [ 12 | "PLA eSUN PLA+ Purple - OAB 23.08.31" 13 | ], 14 | "filament_start_gcode": [ 15 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 16 | ], 17 | "from": "User", 18 | "hot_plate_temp": [ 19 | "60" 20 | ], 21 | "hot_plate_temp_initial_layer": [ 22 | "60" 23 | ], 24 | "inherits": "eSUN PLA+ @BBL X1C", 25 | "is_custom_defined": "0", 26 | "name": "eSUN PLA+ Purple", 27 | "slow_down_layer_time": [ 28 | "2" 29 | ], 30 | "temperature_vitrification": [ 31 | "60" 32 | ], 33 | "textured_plate_temp": [ 34 | "60" 35 | ], 36 | "textured_plate_temp_initial_layer": [ 37 | "60" 38 | ], 39 | "version": "1.7.0.10" 40 | } 41 | -------------------------------------------------------------------------------- /filament/eSUN PLA+ White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "filament_cost": [ 6 | "25" 7 | ], 8 | "filament_flow_ratio": [ 9 | "1.016" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "20" 13 | ], 14 | "filament_settings_id": [ 15 | "PLA eSUN PLA+ White - OAB 23.08.31" 16 | ], 17 | "filament_start_gcode": [ 18 | "; chamber fan speed 70% for PLA. Increase to S255 if you run your \n; printer in a hot environment.\nM106 P3 S175" 19 | ], 20 | "filament_vendor": [ 21 | "eSUN" 22 | ], 23 | "from": "User", 24 | "hot_plate_temp": [ 25 | "60" 26 | ], 27 | "hot_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "inherits": "Generic PLA", 31 | "name": "eSUN PLA+ White", 32 | "slow_down_layer_time": [ 33 | "2" 34 | ], 35 | "temperature_vitrification": [ 36 | "60" 37 | ], 38 | "textured_plate_temp": [ 39 | "60" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "60" 43 | ], 44 | "version": "1.4.1.1" 45 | } 46 | -------------------------------------------------------------------------------- /filament/eSUN ePLA+ Matte Lilac @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF55FF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "1.002" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN ePLA+ Matte Lilac @X1C" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSUN ePLA+ Matte Lilac @X1C", 14 | "nozzle_temperature": [ 15 | "225" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "225" 19 | ], 20 | "nozzle_temperature_range_high": [ 21 | "230" 22 | ], 23 | "version": "1.7.0.12" 24 | } 25 | -------------------------------------------------------------------------------- /filament/eSUN ePLA-SS Rose @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF80BF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.99" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN ePLA-SS Rose @X1C" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSUN ePLA-SS Rose @X1C", 14 | "nozzle_temperature": [ 15 | "225" 16 | ], 17 | "nozzle_temperature_initial_layer": [ 18 | "225" 19 | ], 20 | "nozzle_temperature_range_high": [ 21 | "230" 22 | ], 23 | "nozzle_temperature_range_low": [ 24 | "210" 25 | ], 26 | "version": "1.7.0.12" 27 | } 28 | -------------------------------------------------------------------------------- /filament/eSUN eSilk PLA Violet @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#DF00DF" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.964953" 7 | ], 8 | "filament_settings_id": [ 9 | "eSUN eSilk PLA Violet" 10 | ], 11 | "filament_vendor": [ 12 | "eSUN" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA Silk", 16 | "name": "eSUN eSilk PLA Violet", 17 | "nozzle_temperature": [ 18 | "215" 19 | ], 20 | "nozzle_temperature_initial_layer": [ 21 | "215" 22 | ], 23 | "nozzle_temperature_range_high": [ 24 | "220" 25 | ], 26 | "version": "1.7.0.18" 27 | } 28 | -------------------------------------------------------------------------------- /filament/eSun PLA+ Red @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FF0000" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.999" 7 | ], 8 | "filament_settings_id": [ 9 | "eSun PLA+ Red" 10 | ], 11 | "from": "User", 12 | "inherits": "Generic PLA", 13 | "name": "eSun PLA+ Red", 14 | "version": "1.7.0.12" 15 | } 16 | -------------------------------------------------------------------------------- /filament/eSun PLALite Very Peri @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "cool_plate_temp": [ 3 | "54" 4 | ], 5 | "cool_plate_temp_initial_layer": [ 6 | "54" 7 | ], 8 | "default_filament_colour": [ 9 | "#9141AC" 10 | ], 11 | "filament_settings_id": [ 12 | "eSun PLALite Very Peri" 13 | ], 14 | "filament_vendor": [ 15 | "eSun" 16 | ], 17 | "from": "User", 18 | "inherits": "Generic PLA", 19 | "name": "eSun PLALite Very Peri", 20 | "nozzle_temperature_range_high": [ 21 | "230" 22 | ], 23 | "version": "1.7.0.29" 24 | } 25 | -------------------------------------------------------------------------------- /filament/eSun ePLA Matte Deep Black @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#202020" 4 | ], 5 | "enable_pressure_advance": [ 6 | "1" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.983" 10 | ], 11 | "filament_settings_id": [ 12 | "eSun ePLA Matte Deep Black @X1C" 13 | ], 14 | "filament_vendor": [ 15 | "eSun" 16 | ], 17 | "from": "User", 18 | "hot_plate_temp": [ 19 | "42" 20 | ], 21 | "hot_plate_temp_initial_layer": [ 22 | "42" 23 | ], 24 | "inherits": "Generic PLA", 25 | "is_custom_defined": "0", 26 | "name": "eSun ePLA Matte Deep Black @X1C", 27 | "nozzle_temperature": [ 28 | "195" 29 | ], 30 | "nozzle_temperature_initial_layer": [ 31 | "195" 32 | ], 33 | "nozzle_temperature_range_high": [ 34 | "230" 35 | ], 36 | "pressure_advance": [ 37 | "0.028" 38 | ], 39 | "version": "1.7.0.18" 40 | } 41 | -------------------------------------------------------------------------------- /filament/eSun ePLA Matte White @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#FFFFFF" 4 | ], 5 | "enable_pressure_advance": [ 6 | "1" 7 | ], 8 | "filament_flow_ratio": [ 9 | "0.943" 10 | ], 11 | "filament_settings_id": [ 12 | "eSun ePLA Matte White @X1C" 13 | ], 14 | "filament_vendor": [ 15 | "eSun" 16 | ], 17 | "from": "User", 18 | "hot_plate_temp": [ 19 | "42" 20 | ], 21 | "hot_plate_temp_initial_layer": [ 22 | "42" 23 | ], 24 | "inherits": "Generic PLA", 25 | "is_custom_defined": "0", 26 | "name": "eSun ePLA Matte White @X1C", 27 | "nozzle_temperature": [ 28 | "195" 29 | ], 30 | "nozzle_temperature_initial_layer": [ 31 | "195" 32 | ], 33 | "nozzle_temperature_range_high": [ 34 | "230" 35 | ], 36 | "pressure_advance": [ 37 | "0.028" 38 | ], 39 | "textured_plate_temp": [ 40 | "0" 41 | ], 42 | "textured_plate_temp_initial_layer": [ 43 | "0" 44 | ], 45 | "version": "1.7.0.18" 46 | } 47 | -------------------------------------------------------------------------------- /filament/extrudr GreenTEC Pro @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "additional_cooling_fan_speed": [ 3 | "0" 4 | ], 5 | "compatible_printers": [ 6 | "Bambu Lab X1 Carbon 0.4 nozzle", 7 | "Bambu Lab X1 0.4 nozzle", 8 | "Bambu Lab X1 Carbon 0.6 nozzle", 9 | "Bambu Lab X1 Carbon 0.8 nozzle", 10 | "Bambu Lab X1 0.6 nozzle", 11 | "Bambu Lab X1 0.8 nozzle" 12 | ], 13 | "cool_plate_temp": [ 14 | "40" 15 | ], 16 | "cool_plate_temp_initial_layer": [ 17 | "40" 18 | ], 19 | "default_filament_colour": [ 20 | "#C0C0C0" 21 | ], 22 | "filament_flow_ratio": [ 23 | "0.99" 24 | ], 25 | "filament_max_volumetric_speed": [ 26 | "21" 27 | ], 28 | "filament_settings_id": [ 29 | "extrudr GreenTEC Pro @X1C" 30 | ], 31 | "filament_start_gcode": [ 32 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" 33 | ], 34 | "from": "User", 35 | "inherits": "Generic PLA", 36 | "name": "extrudr GreenTEC Pro @X1C", 37 | "nozzle_temperature_initial_layer": [ 38 | "230" 39 | ], 40 | "temperature_vitrification": [ 41 | "55" 42 | ], 43 | "version": "1.4.0.14" 44 | } 45 | -------------------------------------------------------------------------------- /filament/inherits/Generic ABS @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFB99", 4 | "name": "Generic ABS @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_abs", 8 | "filament_flow_ratio": [ 9 | "0.95" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "16" 13 | ] 14 | } 15 | -------------------------------------------------------------------------------- /filament/inherits/Generic ABS.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSB99", 4 | "name": "Generic ABS", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic ABS @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic ASA @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFB98", 4 | "name": "Generic ASA @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_asa", 8 | "filament_flow_ratio": [ 9 | "0.95" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "12" 13 | ] 14 | } -------------------------------------------------------------------------------- /filament/inherits/Generic ASA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSB98", 4 | "name": "Generic ASA", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic ASA @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic HIPS @BBL X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSS98_00", 4 | "name": "Generic HIPS @BBL X1C", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic HIPS @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1P 0.4 nozzle", 16 | "Bambu Lab P1P 0.6 nozzle", 17 | "Bambu Lab P1P 0.8 nozzle", 18 | "Bambu Lab P1S 0.4 nozzle", 19 | "Bambu Lab P1S 0.6 nozzle", 20 | "Bambu Lab P1S 0.8 nozzle" 21 | ], 22 | "version": "01.07.00.18" 23 | } -------------------------------------------------------------------------------- /filament/inherits/Generic HIPS @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFS98", 4 | "name": "Generic HIPS @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_hips", 8 | "filament_vendor": [ 9 | "Generic" 10 | ], 11 | "filament_is_support": [ 12 | "1" 13 | ] 14 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PA-CF.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFN98", 4 | "setting_id": "GFSN99", 5 | "name": "Generic PA-CF", 6 | "from": "system", 7 | "instantiation": "true", 8 | "inherits": "fdm_filament_pa", 9 | "fan_cooling_layer_time": [ 10 | "5" 11 | ], 12 | "fan_max_speed": [ 13 | "30" 14 | ], 15 | "fan_min_speed": [ 16 | "10" 17 | ], 18 | "filament_type": [ 19 | "PA-CF" 20 | ], 21 | "full_fan_speed_layer": [ 22 | "2" 23 | ], 24 | "overhang_fan_speed": [ 25 | "40" 26 | ], 27 | "overhang_fan_threshold": [ 28 | "0%" 29 | ], 30 | "temperature_vitrification": [ 31 | "170" 32 | ], 33 | "compatible_printers": [ 34 | "Bambu Lab X1 Carbon 0.4 nozzle", 35 | "Bambu Lab X1 Carbon 0.6 nozzle", 36 | "Bambu Lab X1 Carbon 0.8 nozzle", 37 | "Bambu Lab X1 0.4 nozzle", 38 | "Bambu Lab X1 0.6 nozzle", 39 | "Bambu Lab X1 0.8 nozzle", 40 | "Bambu Lab P1S 0.4 nozzle", 41 | "Bambu Lab P1S 0.6 nozzle", 42 | "Bambu Lab P1S 0.8 nozzle" 43 | ], 44 | "version": "01.07.00.18" 45 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFN99", 4 | "setting_id": "GFSN98", 5 | "name": "Generic PA", 6 | "from": "system", 7 | "instantiation": "true", 8 | "inherits": "fdm_filament_pa", 9 | "required_nozzle_HRC": [ 10 | "3" 11 | ], 12 | "nozzle_temperature_initial_layer": [ 13 | "280" 14 | ], 15 | "nozzle_temperature": [ 16 | "280" 17 | ], 18 | "filament_max_volumetric_speed": [ 19 | "16" 20 | ], 21 | "compatible_printers": [ 22 | "Bambu Lab X1 Carbon 0.4 nozzle", 23 | "Bambu Lab X1 Carbon 0.6 nozzle", 24 | "Bambu Lab X1 Carbon 0.8 nozzle", 25 | "Bambu Lab X1 0.4 nozzle", 26 | "Bambu Lab X1 0.6 nozzle", 27 | "Bambu Lab X1 0.8 nozzle", 28 | "Bambu Lab P1S 0.4 nozzle", 29 | "Bambu Lab P1S 0.6 nozzle", 30 | "Bambu Lab P1S 0.8 nozzle" 31 | ], 32 | "version": "01.07.00.18" 33 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PC @BBL P1S.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSC99_04", 4 | "name": "Generic PC @BBL P1S", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PC", 8 | "eng_plate_temp": [ 9 | "100" 10 | ], 11 | "eng_plate_temp_initial_layer": [ 12 | "100" 13 | ], 14 | "hot_plate_temp": [ 15 | "100" 16 | ], 17 | "hot_plate_temp_initial_layer": [ 18 | "100" 19 | ], 20 | "textured_plate_temp": [ 21 | "100" 22 | ], 23 | "textured_plate_temp_initial_layer": [ 24 | "100" 25 | ], 26 | "compatible_printers": [ 27 | "Bambu Lab P1S 0.4 nozzle", 28 | "Bambu Lab P1S 0.6 nozzle", 29 | "Bambu Lab P1S 0.8 nozzle" 30 | ], 31 | "version": "01.07.00.18" 32 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PC @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFC99", 4 | "name": "Generic PC @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pc", 8 | "filament_max_volumetric_speed": [ 9 | "16" 10 | ], 11 | "filament_flow_ratio": [ 12 | "0.94" 13 | ] 14 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PC.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSC99", 4 | "name": "Generic PC", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PC @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 Carbon 0.6 nozzle", 11 | "Bambu Lab X1 Carbon 0.8 nozzle", 12 | "Bambu Lab X1 0.4 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle" 15 | ], 16 | "version": "01.07.00.18" 17 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PETG @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFG99", 4 | "name": "Generic PETG @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pet", 8 | "fan_cooling_layer_time": [ 9 | "30" 10 | ], 11 | "overhang_fan_speed": [ 12 | "90" 13 | ], 14 | "overhang_fan_threshold": [ 15 | "10%" 16 | ], 17 | "fan_max_speed": [ 18 | "90" 19 | ], 20 | "fan_min_speed": [ 21 | "40" 22 | ], 23 | "slow_down_min_speed": [ 24 | "20" 25 | ], 26 | "filament_flow_ratio": [ 27 | "0.95" 28 | ], 29 | "filament_max_volumetric_speed": [ 30 | "12" 31 | ], 32 | "nozzle_temperature_range_high": [ 33 | "270" 34 | ], 35 | "cool_plate_temp": [ 36 | "0" 37 | ], 38 | "eng_plate_temp": [ 39 | "70" 40 | ], 41 | "cool_plate_temp_initial_layer": [ 42 | "0" 43 | ], 44 | "eng_plate_temp_initial_layer": [ 45 | "70" 46 | ], 47 | "hot_plate_temp": [ 48 | "70" 49 | ], 50 | "textured_plate_temp": [ 51 | "70" 52 | ], 53 | "textured_plate_temp_initial_layer": [ 54 | "70" 55 | ], 56 | "hot_plate_temp_initial_layer": [ 57 | "70" 58 | ], 59 | "filament_start_gcode": [ 60 | "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" 61 | ] 62 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PETG-CF @BBL X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSG50", 4 | "name": "Generic PETG-CF @BBL X1C", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PETG-CF @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PETG-CF @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFG98", 4 | "name": "Generic PETG-CF @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pet", 8 | "filament_flow_ratio": [ 9 | "0.95" 10 | ], 11 | "temperature_vitrification": [ 12 | "75" 13 | ], 14 | "overhang_fan_threshold": [ 15 | "10%" 16 | ], 17 | "overhang_fan_speed": [ 18 | "90" 19 | ], 20 | "cool_plate_temp": [ 21 | "0" 22 | ], 23 | "eng_plate_temp": [ 24 | "70" 25 | ], 26 | "hot_plate_temp": [ 27 | "70" 28 | ], 29 | "textured_plate_temp": [ 30 | "70" 31 | ], 32 | "cool_plate_temp_initial_layer": [ 33 | "0" 34 | ], 35 | "eng_plate_temp_initial_layer": [ 36 | "70" 37 | ], 38 | "hot_plate_temp_initial_layer": [ 39 | "70" 40 | ], 41 | "textured_plate_temp_initial_layer": [ 42 | "70" 43 | ], 44 | "required_nozzle_HRC": [ 45 | "40" 46 | ], 47 | "filament_vendor": [ 48 | "Bambu Lab" 49 | ], 50 | "filament_type": [ 51 | "PETG-CF" 52 | ], 53 | "nozzle_temperature_range_low": [ 54 | "240" 55 | ], 56 | "nozzle_temperature_range_high": [ 57 | "270" 58 | ], 59 | "filament_cost": [ 60 | "34.99" 61 | ], 62 | "filament_density": [ 63 | "1.25" 64 | ], 65 | "fan_max_speed": [ 66 | "30" 67 | ], 68 | "fan_min_speed": [ 69 | "0" 70 | ], 71 | "filament_max_volumetric_speed": [ 72 | "12" 73 | ], 74 | "slow_down_layer_time": [ 75 | "6" 76 | ], 77 | "filament_start_gcode":[ 78 | "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}" 79 | ] 80 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PETG.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSG99", 4 | "name": "Generic PETG", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PETG @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFL99", 4 | "name": "Generic PLA @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pla", 8 | "filament_flow_ratio": [ 9 | "0.98" 10 | ], 11 | "slow_down_layer_time": [ 12 | "8" 13 | ], 14 | "filament_start_gcode": [ 15 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" 16 | ] 17 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA High Speed @BBL P1P.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Generic PLA High Speed @BBL P1P", 4 | "inherits": "Generic PLA High Speed @base", 5 | "from": "system", 6 | "setting_id": "GFSL95_02", 7 | "instantiation": "true", 8 | "fan_cooling_layer_time": [ 9 | "80" 10 | ], 11 | "fan_min_speed": [ 12 | "50" 13 | ], 14 | "hot_plate_temp": [ 15 | "65" 16 | ], 17 | "hot_plate_temp_initial_layer": [ 18 | "65" 19 | ], 20 | "textured_plate_temp": [ 21 | "65" 22 | ], 23 | "textured_plate_temp_initial_layer": [ 24 | "65" 25 | ], 26 | "compatible_printers": [ 27 | "Bambu Lab P1P 0.4 nozzle", 28 | "Bambu Lab P1P 0.6 nozzle", 29 | "Bambu Lab P1P 0.8 nozzle" 30 | ], 31 | "version": "01.07.00.18" 32 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA High Speed @BBL X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Generic PLA High Speed @BBL X1C", 4 | "inherits": "Generic PLA High Speed @base", 5 | "from": "system", 6 | "setting_id": "GFSL95_00", 7 | "instantiation": "true", 8 | "slow_down_layer_time": [ 9 | "4" 10 | ], 11 | "compatible_printers": [ 12 | "Bambu Lab X1 Carbon 0.4 nozzle", 13 | "Bambu Lab X1 0.4 nozzle", 14 | "Bambu Lab P1S 0.4 nozzle", 15 | "Bambu Lab X1 Carbon 0.6 nozzle", 16 | "Bambu Lab X1 Carbon 0.8 nozzle", 17 | "Bambu Lab X1 0.8 nozzle", 18 | "Bambu Lab X1 0.6 nozzle", 19 | "Bambu Lab P1S 0.6 nozzle", 20 | "Bambu Lab P1S 0.8 nozzle" 21 | ], 22 | "version": "01.07.00.18" 23 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA High Speed @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "Generic PLA High Speed @base", 4 | "inherits": "fdm_filament_pla", 5 | "from": "system", 6 | "filament_id": "GFL95", 7 | "instantiation": "false", 8 | "filament_flow_ratio": [ 9 | "0.98" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "18" 13 | ], 14 | "slow_down_layer_time": [ 15 | "8" 16 | ] 17 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA Silk @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFL96", 4 | "name": "Generic PLA Silk @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pla", 8 | "filament_flow_ratio": [ 9 | "0.98" 10 | ], 11 | "slow_down_layer_time": [ 12 | "8" 13 | ], 14 | "filament_start_gcode": [ 15 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming" 16 | ] 17 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA Silk.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSL99_01", 4 | "name": "Generic PLA Silk", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PLA Silk @base", 8 | "filament_max_volumetric_speed": [ 9 | "7.5" 10 | ], 11 | "filament_retraction_length": [ 12 | "0.5" 13 | ], 14 | "compatible_printers": [ 15 | "Bambu Lab X1 Carbon 0.4 nozzle", 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 Carbon 0.6 nozzle", 18 | "Bambu Lab X1 Carbon 0.8 nozzle", 19 | "Bambu Lab X1 0.6 nozzle", 20 | "Bambu Lab X1 0.8 nozzle", 21 | "Bambu Lab P1S 0.4 nozzle", 22 | "Bambu Lab P1S 0.6 nozzle", 23 | "Bambu Lab P1S 0.8 nozzle" 24 | ], 25 | "version": "01.07.00.18" 26 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA-CF @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFL98", 4 | "name": "Generic PLA-CF @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pla", 8 | "required_nozzle_HRC": [ 9 | "40" 10 | ], 11 | "cool_plate_temp": [ 12 | "45" 13 | ], 14 | "cool_plate_temp_initial_layer": [ 15 | "45" 16 | ], 17 | "filament_flow_ratio": [ 18 | "0.95" 19 | ], 20 | "filament_type": [ 21 | "PLA-CF" 22 | ], 23 | "slow_down_layer_time": [ 24 | "7" 25 | ], 26 | "additional_cooling_fan_speed": [ 27 | "0" 28 | ], 29 | "filament_start_gcode": [ 30 | "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" 31 | ] 32 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA-CF.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSL98", 4 | "name": "Generic PLA-CF", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PLA-CF @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 Carbon 0.6 nozzle", 11 | "Bambu Lab X1 Carbon 0.8 nozzle", 12 | "Bambu Lab X1 0.4 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PLA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSL99", 4 | "name": "Generic PLA", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PLA @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "filament_start_gcode": [ 20 | "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}" 21 | ], 22 | "version": "01.07.00.18" 23 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PVA @0.2 nozzle.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSS99_00", 4 | "name": "Generic PVA @0.2 nozzle", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PVA @base", 8 | "filament_max_volumetric_speed": [ 9 | "0.5" 10 | ], 11 | "compatible_printers": [ 12 | "Bambu Lab X1 Carbon 0.2 nozzle", 13 | "Bambu Lab X1 0.2 nozzle", 14 | "Bambu Lab P1S 0.2 nozzle" 15 | ], 16 | "version": "01.07.00.18" 17 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PVA @base.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFS99", 4 | "name": "Generic PVA @base", 5 | "from": "system", 6 | "instantiation": "false", 7 | "inherits": "fdm_filament_pva", 8 | "filament_flow_ratio": [ 9 | "0.95" 10 | ], 11 | "filament_max_volumetric_speed": [ 12 | "16" 13 | ], 14 | "slow_down_layer_time": [ 15 | "7" 16 | ], 17 | "slow_down_min_speed": [ 18 | "20" 19 | ] 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic PVA.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "setting_id": "GFSS99", 4 | "name": "Generic PVA", 5 | "from": "system", 6 | "instantiation": "true", 7 | "inherits": "Generic PVA @base", 8 | "compatible_printers": [ 9 | "Bambu Lab X1 Carbon 0.4 nozzle", 10 | "Bambu Lab X1 0.4 nozzle", 11 | "Bambu Lab X1 Carbon 0.6 nozzle", 12 | "Bambu Lab X1 Carbon 0.8 nozzle", 13 | "Bambu Lab X1 0.6 nozzle", 14 | "Bambu Lab X1 0.8 nozzle", 15 | "Bambu Lab P1S 0.4 nozzle", 16 | "Bambu Lab P1S 0.6 nozzle", 17 | "Bambu Lab P1S 0.8 nozzle" 18 | ], 19 | "version": "01.07.00.18" 20 | } -------------------------------------------------------------------------------- /filament/inherits/Generic TPU.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "filament_id": "GFU99", 4 | "setting_id": "GFSR99", 5 | "name": "Generic TPU", 6 | "from": "system", 7 | "instantiation": "true", 8 | "inherits": "fdm_filament_tpu", 9 | "filament_max_volumetric_speed": [ 10 | "3.2" 11 | ], 12 | "filament_start_gcode": [ 13 | "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" 14 | ], 15 | "compatible_printers": [ 16 | "Bambu Lab X1 0.4 nozzle", 17 | "Bambu Lab X1 0.6 nozzle", 18 | "Bambu Lab X1 0.8 nozzle", 19 | "Bambu Lab X1 Carbon 0.4 nozzle", 20 | "Bambu Lab X1 Carbon 0.6 nozzle", 21 | "Bambu Lab X1 Carbon 0.8 nozzle", 22 | "Bambu Lab P1S 0.4 nozzle", 23 | "Bambu Lab P1S 0.6 nozzle", 24 | "Bambu Lab P1S 0.8 nozzle" 25 | ], 26 | "version": "01.07.00.18" 27 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_abs.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_abs", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp" : [ 8 | "0" 9 | ], 10 | "eng_plate_temp" : [ 11 | "90" 12 | ], 13 | "hot_plate_temp" : [ 14 | "90" 15 | ], 16 | "textured_plate_temp" : [ 17 | "90" 18 | ], 19 | "cool_plate_temp_initial_layer" : [ 20 | "0" 21 | ], 22 | "eng_plate_temp_initial_layer" : [ 23 | "90" 24 | ], 25 | "hot_plate_temp_initial_layer" : [ 26 | "90" 27 | ], 28 | "textured_plate_temp_initial_layer" : [ 29 | "90" 30 | ], 31 | "slow_down_for_layer_cooling": [ 32 | "1" 33 | ], 34 | "close_fan_the_first_x_layers": [ 35 | "3" 36 | ], 37 | "fan_cooling_layer_time": [ 38 | "30" 39 | ], 40 | "filament_max_volumetric_speed": [ 41 | "28.6" 42 | ], 43 | "filament_type": [ 44 | "ABS" 45 | ], 46 | "filament_density": [ 47 | "1.04" 48 | ], 49 | "filament_cost": [ 50 | "20" 51 | ], 52 | "nozzle_temperature_initial_layer": [ 53 | "260" 54 | ], 55 | "reduce_fan_stop_start_freq": [ 56 | "1" 57 | ], 58 | "fan_max_speed": [ 59 | "80" 60 | ], 61 | "fan_min_speed": [ 62 | "10" 63 | ], 64 | "overhang_fan_threshold": [ 65 | "25%" 66 | ], 67 | "overhang_fan_speed": [ 68 | "80" 69 | ], 70 | "nozzle_temperature": [ 71 | "270" 72 | ], 73 | "temperature_vitrification": [ 74 | "100" 75 | ], 76 | "nozzle_temperature_range_low": [ 77 | "240" 78 | ], 79 | "nozzle_temperature_range_high": [ 80 | "280" 81 | ], 82 | "slow_down_min_speed": [ 83 | "20" 84 | ], 85 | "slow_down_layer_time": [ 86 | "3" 87 | ] 88 | } 89 | -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_asa.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_asa", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp": [ 8 | "0" 9 | ], 10 | "eng_plate_temp": [ 11 | "90" 12 | ], 13 | "hot_plate_temp": [ 14 | "90" 15 | ], 16 | "textured_plate_temp": [ 17 | "90" 18 | ], 19 | "cool_plate_temp_initial_layer": [ 20 | "0" 21 | ], 22 | "eng_plate_temp_initial_layer": [ 23 | "90" 24 | ], 25 | "hot_plate_temp_initial_layer": [ 26 | "90" 27 | ], 28 | "textured_plate_temp_initial_layer": [ 29 | "90" 30 | ], 31 | "fan_cooling_layer_time": [ 32 | "35" 33 | ], 34 | "filament_max_volumetric_speed": [ 35 | "28.6" 36 | ], 37 | "filament_type": [ 38 | "ASA" 39 | ], 40 | "filament_density": [ 41 | "1.04" 42 | ], 43 | "filament_cost": [ 44 | "20" 45 | ], 46 | "nozzle_temperature_initial_layer": [ 47 | "260" 48 | ], 49 | "reduce_fan_stop_start_freq": [ 50 | "1" 51 | ], 52 | "fan_max_speed": [ 53 | "80" 54 | ], 55 | "fan_min_speed": [ 56 | "10" 57 | ], 58 | "overhang_fan_threshold": [ 59 | "25%" 60 | ], 61 | "overhang_fan_speed": [ 62 | "80" 63 | ], 64 | "nozzle_temperature": [ 65 | "260" 66 | ], 67 | "nozzle_temperature_range_low": [ 68 | "240" 69 | ], 70 | "nozzle_temperature_range_high": [ 71 | "280" 72 | ], 73 | "slow_down_min_speed": [ 74 | "20" 75 | ], 76 | "slow_down_layer_time": [ 77 | "3" 78 | ] 79 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_common.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_common", 4 | "from": "system", 5 | "instantiation": "false", 6 | "filament_is_support": [ 7 | "0" 8 | ], 9 | "required_nozzle_HRC": [ 10 | "3" 11 | ], 12 | "cool_plate_temp": [ 13 | "60" 14 | ], 15 | "eng_plate_temp": [ 16 | "60" 17 | ], 18 | "hot_plate_temp": [ 19 | "60" 20 | ], 21 | "textured_plate_temp": [ 22 | "60" 23 | ], 24 | "cool_plate_temp_initial_layer": [ 25 | "60" 26 | ], 27 | "eng_plate_temp_initial_layer": [ 28 | "60" 29 | ], 30 | "hot_plate_temp_initial_layer": [ 31 | "60" 32 | ], 33 | "textured_plate_temp_initial_layer": [ 34 | "60" 35 | ], 36 | "overhang_fan_threshold": [ 37 | "95%" 38 | ], 39 | "overhang_fan_speed": [ 40 | "100" 41 | ], 42 | "slow_down_for_layer_cooling": [ 43 | "1" 44 | ], 45 | "close_fan_the_first_x_layers": [ 46 | "3" 47 | ], 48 | "filament_end_gcode": [ 49 | "; filament end gcode \nM106 P3 S0\n" 50 | ], 51 | "filament_flow_ratio": [ 52 | "1" 53 | ], 54 | "reduce_fan_stop_start_freq": [ 55 | "0" 56 | ], 57 | "fan_cooling_layer_time": [ 58 | "60" 59 | ], 60 | "filament_cost": [ 61 | "0" 62 | ], 63 | "filament_density": [ 64 | "0" 65 | ], 66 | "filament_deretraction_speed": [ 67 | "nil" 68 | ], 69 | "filament_diameter": [ 70 | "1.75" 71 | ], 72 | "filament_max_volumetric_speed": [ 73 | "0" 74 | ], 75 | "filament_minimal_purge_on_wipe_tower": [ 76 | "15" 77 | ], 78 | "filament_retraction_minimum_travel": [ 79 | "nil" 80 | ], 81 | "filament_retract_before_wipe": [ 82 | "nil" 83 | ], 84 | "filament_retract_when_changing_layer": [ 85 | "nil" 86 | ], 87 | "filament_retraction_length": [ 88 | "nil" 89 | ], 90 | "filament_z_hop": [ 91 | "nil" 92 | ], 93 | "filament_z_hop_types": [ 94 | "nil" 95 | ], 96 | "filament_retract_restart_extra": [ 97 | "nil" 98 | ], 99 | "filament_retraction_speed": [ 100 | "nil" 101 | ], 102 | "filament_settings_id": [ 103 | "" 104 | ], 105 | "filament_soluble": [ 106 | "0" 107 | ], 108 | "filament_type": [ 109 | "PLA" 110 | ], 111 | "filament_vendor": [ 112 | "Generic" 113 | ], 114 | "filament_wipe": [ 115 | "nil" 116 | ], 117 | "filament_wipe_distance": [ 118 | "nil" 119 | ], 120 | "nozzle_temperature_initial_layer": [ 121 | "200" 122 | ], 123 | "full_fan_speed_layer": [ 124 | "0" 125 | ], 126 | "fan_max_speed": [ 127 | "100" 128 | ], 129 | "fan_min_speed": [ 130 | "35" 131 | ], 132 | "slow_down_min_speed": [ 133 | "10" 134 | ], 135 | "slow_down_layer_time": [ 136 | "8" 137 | ], 138 | "filament_start_gcode": [ 139 | "; Filament gcode\n" 140 | ], 141 | "nozzle_temperature": [ 142 | "200" 143 | ], 144 | "temperature_vitrification": [ 145 | "100" 146 | ], 147 | "compatible_printers":[] 148 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_hips.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_hips", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp": [ 8 | "0" 9 | ], 10 | "eng_plate_temp": [ 11 | "90" 12 | ], 13 | "hot_plate_temp": [ 14 | "90" 15 | ], 16 | "textured_plate_temp": [ 17 | "90" 18 | ], 19 | "cool_plate_temp_initial_layer": [ 20 | "0" 21 | ], 22 | "eng_plate_temp_initial_layer": [ 23 | "90" 24 | ], 25 | "hot_plate_temp_initial_layer": [ 26 | "90" 27 | ], 28 | "textured_plate_temp_initial_layer": [ 29 | "90" 30 | ], 31 | "fan_cooling_layer_time": [ 32 | "10" 33 | ], 34 | "filament_max_volumetric_speed": [ 35 | "8" 36 | ], 37 | "filament_type": [ 38 | "HIPS" 39 | ], 40 | "filament_density": [ 41 | "1.06" 42 | ], 43 | "filament_cost": [ 44 | "22.99" 45 | ], 46 | "nozzle_temperature_initial_layer": [ 47 | "240" 48 | ], 49 | "fan_max_speed": [ 50 | "60" 51 | ], 52 | "fan_min_speed": [ 53 | "0" 54 | ], 55 | "overhang_fan_threshold": [ 56 | "25%" 57 | ], 58 | "overhang_fan_speed": [ 59 | "80" 60 | ], 61 | "nozzle_temperature": [ 62 | "240" 63 | ], 64 | "nozzle_temperature_range_low": [ 65 | "220" 66 | ], 67 | "nozzle_temperature_range_high": [ 68 | "270" 69 | ], 70 | "slow_down_min_speed": [ 71 | "20" 72 | ], 73 | "slow_down_layer_time": [ 74 | "6" 75 | ], 76 | "temperature_vitrification": [ 77 | "100" 78 | ], 79 | "required_nozzle_HRC": [ 80 | "3" 81 | ], 82 | "additional_cooling_fan_speed":[ 83 | "0" 84 | ] 85 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_pa.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_pa", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "required_nozzle_HRC": [ 8 | "40" 9 | ], 10 | "cool_plate_temp": [ 11 | "0" 12 | ], 13 | "eng_plate_temp": [ 14 | "100" 15 | ], 16 | "hot_plate_temp": [ 17 | "100" 18 | ], 19 | "textured_plate_temp": [ 20 | "100" 21 | ], 22 | "cool_plate_temp_initial_layer": [ 23 | "0" 24 | ], 25 | "eng_plate_temp_initial_layer": [ 26 | "100" 27 | ], 28 | "hot_plate_temp_initial_layer": [ 29 | "100" 30 | ], 31 | "textured_plate_temp_initial_layer": [ 32 | "100" 33 | ], 34 | "fan_cooling_layer_time": [ 35 | "4" 36 | ], 37 | "filament_max_volumetric_speed": [ 38 | "8" 39 | ], 40 | "filament_type": [ 41 | "PA" 42 | ], 43 | "filament_density": [ 44 | "1.04" 45 | ], 46 | "filament_cost": [ 47 | "20" 48 | ], 49 | "nozzle_temperature_initial_layer": [ 50 | "290" 51 | ], 52 | "fan_max_speed": [ 53 | "60" 54 | ], 55 | "fan_min_speed": [ 56 | "0" 57 | ], 58 | "overhang_fan_speed": [ 59 | "30" 60 | ], 61 | "nozzle_temperature": [ 62 | "290" 63 | ], 64 | "temperature_vitrification": [ 65 | "108" 66 | ], 67 | "nozzle_temperature_range_low": [ 68 | "260" 69 | ], 70 | "nozzle_temperature_range_high": [ 71 | "300" 72 | ], 73 | "slow_down_min_speed": [ 74 | "20" 75 | ], 76 | "slow_down_layer_time": [ 77 | "2" 78 | ] 79 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_pc.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_pc", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp": [ 8 | "0" 9 | ], 10 | "eng_plate_temp": [ 11 | "110" 12 | ], 13 | "hot_plate_temp": [ 14 | "110" 15 | ], 16 | "textured_plate_temp": [ 17 | "110" 18 | ], 19 | "cool_plate_temp_initial_layer": [ 20 | "0" 21 | ], 22 | "eng_plate_temp_initial_layer": [ 23 | "110" 24 | ], 25 | "hot_plate_temp_initial_layer": [ 26 | "110" 27 | ], 28 | "textured_plate_temp_initial_layer": [ 29 | "110" 30 | ], 31 | "fan_cooling_layer_time": [ 32 | "30" 33 | ], 34 | "filament_max_volumetric_speed": [ 35 | "23.2" 36 | ], 37 | "filament_type": [ 38 | "PC" 39 | ], 40 | "filament_density": [ 41 | "1.04" 42 | ], 43 | "filament_cost": [ 44 | "20" 45 | ], 46 | "nozzle_temperature_initial_layer": [ 47 | "270" 48 | ], 49 | "reduce_fan_stop_start_freq": [ 50 | "1" 51 | ], 52 | "fan_max_speed": [ 53 | "60" 54 | ], 55 | "fan_min_speed": [ 56 | "10" 57 | ], 58 | "overhang_fan_threshold": [ 59 | "25%" 60 | ], 61 | "overhang_fan_speed": [ 62 | "60" 63 | ], 64 | "nozzle_temperature": [ 65 | "280" 66 | ], 67 | "temperature_vitrification": [ 68 | "120" 69 | ], 70 | "nozzle_temperature_range_low": [ 71 | "260" 72 | ], 73 | "nozzle_temperature_range_high": [ 74 | "290" 75 | ], 76 | "slow_down_min_speed": [ 77 | "20" 78 | ], 79 | "slow_down_layer_time": [ 80 | "2" 81 | ] 82 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_pet.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_pet", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "eng_plate_temp": [ 8 | "0" 9 | ], 10 | "hot_plate_temp": [ 11 | "80" 12 | ], 13 | "textured_plate_temp": [ 14 | "80" 15 | ], 16 | "eng_plate_temp_initial_layer": [ 17 | "0" 18 | ], 19 | "hot_plate_temp_initial_layer": [ 20 | "80" 21 | ], 22 | "textured_plate_temp_initial_layer": [ 23 | "80" 24 | ], 25 | "fan_cooling_layer_time": [ 26 | "20" 27 | ], 28 | "filament_max_volumetric_speed": [ 29 | "25" 30 | ], 31 | "filament_type": [ 32 | "PETG" 33 | ], 34 | "filament_density": [ 35 | "1.27" 36 | ], 37 | "filament_cost": [ 38 | "30" 39 | ], 40 | "nozzle_temperature_initial_layer": [ 41 | "255" 42 | ], 43 | "reduce_fan_stop_start_freq": [ 44 | "1" 45 | ], 46 | "fan_min_speed": [ 47 | "20" 48 | ], 49 | "nozzle_temperature": [ 50 | "255" 51 | ], 52 | "temperature_vitrification": [ 53 | "70" 54 | ], 55 | "nozzle_temperature_range_low": [ 56 | "220" 57 | ], 58 | "nozzle_temperature_range_high": [ 59 | "260" 60 | ], 61 | "filament_start_gcode": [ 62 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming" 63 | ] 64 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_pla.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_pla", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "fan_cooling_layer_time": [ 8 | "100" 9 | ], 10 | "filament_max_volumetric_speed": [ 11 | "12" 12 | ], 13 | "filament_type": [ 14 | "PLA" 15 | ], 16 | "filament_density": [ 17 | "1.24" 18 | ], 19 | "filament_cost": [ 20 | "20" 21 | ], 22 | "cool_plate_temp" : [ 23 | "35" 24 | ], 25 | "eng_plate_temp" : [ 26 | "0" 27 | ], 28 | "hot_plate_temp" : [ 29 | "55" 30 | ], 31 | "textured_plate_temp" : [ 32 | "55" 33 | ], 34 | "cool_plate_temp_initial_layer" : [ 35 | "35" 36 | ], 37 | "eng_plate_temp_initial_layer" : [ 38 | "0" 39 | ], 40 | "hot_plate_temp_initial_layer" : [ 41 | "55" 42 | ], 43 | "textured_plate_temp_initial_layer" : [ 44 | "55" 45 | ], 46 | "nozzle_temperature_initial_layer": [ 47 | "220" 48 | ], 49 | "reduce_fan_stop_start_freq": [ 50 | "1" 51 | ], 52 | "slow_down_for_layer_cooling": [ 53 | "1" 54 | ], 55 | "fan_max_speed": [ 56 | "100" 57 | ], 58 | "fan_min_speed": [ 59 | "100" 60 | ], 61 | "overhang_fan_speed": [ 62 | "100" 63 | ], 64 | "overhang_fan_threshold": [ 65 | "50%" 66 | ], 67 | "close_fan_the_first_x_layers": [ 68 | "1" 69 | ], 70 | "nozzle_temperature": [ 71 | "220" 72 | ], 73 | "temperature_vitrification": [ 74 | "55" 75 | ], 76 | "nozzle_temperature_range_low": [ 77 | "190" 78 | ], 79 | "nozzle_temperature_range_high": [ 80 | "240" 81 | ], 82 | "slow_down_min_speed": [ 83 | "20" 84 | ], 85 | "slow_down_layer_time": [ 86 | "4" 87 | ], 88 | "additional_cooling_fan_speed": [ 89 | "70" 90 | ], 91 | "filament_start_gcode": [ 92 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 93 | ] 94 | } 95 | -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_pva.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_pva", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp": [ 8 | "45" 9 | ], 10 | "eng_plate_temp": [ 11 | "0" 12 | ], 13 | "hot_plate_temp": [ 14 | "55" 15 | ], 16 | "textured_plate_temp": [ 17 | "55" 18 | ], 19 | "cool_plate_temp_initial_layer": [ 20 | "45" 21 | ], 22 | "eng_plate_temp_initial_layer": [ 23 | "0" 24 | ], 25 | "hot_plate_temp_initial_layer": [ 26 | "55" 27 | ], 28 | "textured_plate_temp_initial_layer": [ 29 | "55" 30 | ], 31 | "fan_cooling_layer_time": [ 32 | "100" 33 | ], 34 | "filament_max_volumetric_speed": [ 35 | "15" 36 | ], 37 | "filament_soluble": [ 38 | "1" 39 | ], 40 | "filament_is_support": [ 41 | "1" 42 | ], 43 | "filament_type": [ 44 | "PVA" 45 | ], 46 | "filament_density": [ 47 | "1.24" 48 | ], 49 | "filament_cost": [ 50 | "20" 51 | ], 52 | "nozzle_temperature_initial_layer": [ 53 | "220" 54 | ], 55 | "reduce_fan_stop_start_freq": [ 56 | "1" 57 | ], 58 | "fan_min_speed": [ 59 | "100" 60 | ], 61 | "overhang_fan_threshold": [ 62 | "50%" 63 | ], 64 | "close_fan_the_first_x_layers": [ 65 | "1" 66 | ], 67 | "nozzle_temperature": [ 68 | "220" 69 | ], 70 | "temperature_vitrification": [ 71 | "55" 72 | ], 73 | "nozzle_temperature_range_low": [ 74 | "190" 75 | ], 76 | "nozzle_temperature_range_high": [ 77 | "240" 78 | ], 79 | "slow_down_min_speed": [ 80 | "50" 81 | ], 82 | "slow_down_layer_time": [ 83 | "4" 84 | ], 85 | "additional_cooling_fan_speed": [ 86 | "70" 87 | ], 88 | "filament_start_gcode": [ 89 | "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" 90 | ] 91 | } -------------------------------------------------------------------------------- /filament/inherits/fdm_filament_tpu.json: -------------------------------------------------------------------------------- 1 | { 2 | "type": "filament", 3 | "name": "fdm_filament_tpu", 4 | "from": "system", 5 | "instantiation": "false", 6 | "inherits": "fdm_filament_common", 7 | "cool_plate_temp": [ 8 | "30" 9 | ], 10 | "eng_plate_temp": [ 11 | "30" 12 | ], 13 | "hot_plate_temp": [ 14 | "35" 15 | ], 16 | "textured_plate_temp": [ 17 | "35" 18 | ], 19 | "cool_plate_temp_initial_layer": [ 20 | "30" 21 | ], 22 | "eng_plate_temp_initial_layer": [ 23 | "30" 24 | ], 25 | "hot_plate_temp_initial_layer": [ 26 | "35" 27 | ], 28 | "textured_plate_temp_initial_layer": [ 29 | "35" 30 | ], 31 | "fan_cooling_layer_time": [ 32 | "100" 33 | ], 34 | "filament_max_volumetric_speed": [ 35 | "15" 36 | ], 37 | "filament_type": [ 38 | "TPU" 39 | ], 40 | "filament_density": [ 41 | "1.24" 42 | ], 43 | "filament_cost": [ 44 | "20" 45 | ], 46 | "filament_retraction_length": [ 47 | "0.4" 48 | ], 49 | "nozzle_temperature_initial_layer": [ 50 | "240" 51 | ], 52 | "reduce_fan_stop_start_freq": [ 53 | "1" 54 | ], 55 | "fan_min_speed": [ 56 | "100" 57 | ], 58 | "additional_cooling_fan_speed": [ 59 | "70" 60 | ], 61 | "close_fan_the_first_x_layers": [ 62 | "1" 63 | ], 64 | "nozzle_temperature": [ 65 | "240" 66 | ], 67 | "temperature_vitrification": [ 68 | "35" 69 | ], 70 | "nozzle_temperature_range_low": [ 71 | "200" 72 | ], 73 | "nozzle_temperature_range_high": [ 74 | "250" 75 | ], 76 | "filament_start_gcode": [ 77 | "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}" 78 | ] 79 | } -------------------------------------------------------------------------------- /filament/x PLA Glow Multicolor @X1C.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_filament_colour": [ 3 | "#80FF00" 4 | ], 5 | "filament_flow_ratio": [ 6 | "0.9622" 7 | ], 8 | "filament_settings_id": [ 9 | "x PLA Glow Multicolor @X1C" 10 | ], 11 | "filament_vendor": [ 12 | "x" 13 | ], 14 | "from": "User", 15 | "inherits": "Generic PLA", 16 | "is_custom_defined": "0", 17 | "name": "x PLA Glow Multicolor @X1C", 18 | "nozzle_temperature": [ 19 | "215" 20 | ], 21 | "nozzle_temperature_initial_layer": [ 22 | "215" 23 | ], 24 | "nozzle_temperature_range_high": [ 25 | "220" 26 | ], 27 | "version": "1.7.0.18" 28 | } 29 | -------------------------------------------------------------------------------- /machine/Flashforge Adventurer 3 Series 0.4 nozzle.json: -------------------------------------------------------------------------------- 1 | { 2 | "from": "User", 3 | "host_type": "flashforge", 4 | "inherits": "Flashforge Adventurer 3 0.4 nozzle", 5 | "is_custom_defined": "0", 6 | "name": "Flashforge Adventurer 3 0.4 nozzle", 7 | "print_host": "X.X.X.X", 8 | "print_host_webui": "http://X.X.X.X:8080/?action=stream243", 9 | "printer_settings_id": "Flashforge Adventurer 3 Series 0.4 Nozzle - Multi", 10 | "support_multi_bed_types": "1", 11 | "version": "2.1.1.0" 12 | } 13 | -------------------------------------------------------------------------------- /machine/README.md: -------------------------------------------------------------------------------- 1 | Naming Convention for Machine User Presets 2 | 3 | `\ \ - \` 4 | 5 | e.g 6 | 7 | `Bambu Lab X1 Carbon 0.4 nozzle - REDUCED CURRENT` 8 | -------------------------------------------------------------------------------- /process/0.08mm Extra Fine @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_acceleration": "7000", 3 | "from": "User", 4 | "gap_infill_speed": "120", 5 | "inherits": "0.08mm Extra Fine @BBL X1C", 6 | "initial_layer_acceleration": "400", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_speed": "125", 10 | "internal_solid_infill_speed": "125", 11 | "is_custom_defined": "0", 12 | "name": "0.08mm Extra Fine @BBL X1C - SLOWED", 13 | "outer_wall_acceleration": "4000", 14 | "outer_wall_speed": "100", 15 | "print_settings_id": "0.08mm Extra Fine @BBL X1C - SLOWED", 16 | "sparse_infill_pattern": "cubic", 17 | "sparse_infill_speed": "125", 18 | "top_surface_acceleration": "1000", 19 | "top_surface_speed": "100", 20 | "travel_speed": "400", 21 | "version": "1.7.0.29" 22 | } 23 | -------------------------------------------------------------------------------- /process/0.12mm Fine @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_acceleration": "7000", 3 | "from": "User", 4 | "gap_infill_speed": "150", 5 | "inherits": "0.12mm Fine @BBL X1C", 6 | "initial_layer_acceleration": "300", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_speed": "150", 10 | "internal_solid_infill_speed": "150", 11 | "is_custom_defined": "0", 12 | "name": "0.12mm Fine @BBL X1C - SLOWED", 13 | "outer_wall_acceleration": "4000", 14 | "outer_wall_speed": "100", 15 | "print_settings_id": "0.12mm Fine @BBL X1C - SLOWED", 16 | "sparse_infill_pattern": "cubic", 17 | "sparse_infill_speed": "150", 18 | "top_surface_acceleration": "1000", 19 | "top_surface_speed": "100", 20 | "travel_speed": "300", 21 | "version": "1.7.0.12" 22 | } 23 | -------------------------------------------------------------------------------- /process/0.16mm Optimal @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_acceleration": "7000", 3 | "from": "User", 4 | "gap_infill_speed": "120", 5 | "inherits": "0.16mm Optimal @BBL X1C", 6 | "initial_layer_acceleration": "400", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_speed": "150", 10 | "internal_solid_infill_speed": "150", 11 | "is_custom_defined": "0", 12 | "name": "0.16mm Optimal @BBL X1C - SLOWED", 13 | "outer_wall_acceleration": "4000", 14 | "outer_wall_speed": "100", 15 | "print_settings_id": "0.16mm Optimal @BBL X1C - SLOWED", 16 | "sparse_infill_pattern": "cubic", 17 | "sparse_infill_speed": "140", 18 | "top_surface_acceleration": "1000", 19 | "top_surface_speed": "100", 20 | "travel_speed": "400", 21 | "version": "1.7.0.12" 22 | } 23 | -------------------------------------------------------------------------------- /process/0.20mm Standard @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_acceleration": "7000", 3 | "from": "User", 4 | "gap_infill_speed": "120", 5 | "inherits": "0.20mm Standard @BBL X1C", 6 | "initial_layer_acceleration": "400", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_speed": "150", 10 | "internal_solid_infill_speed": "120", 11 | "is_custom_defined": "0", 12 | "name": "0.20mm Standard @BBL X1C - SLOWED", 13 | "outer_wall_acceleration": "3000", 14 | "outer_wall_speed": "100", 15 | "print_settings_id": "0.20mm Standard @BBL X1C - SLOWED", 16 | "sparse_infill_pattern": "cubic", 17 | "sparse_infill_speed": "140", 18 | "top_surface_acceleration": "1000", 19 | "top_surface_speed": "100", 20 | "travel_speed": "400", 21 | "version": "1.7.0.12" 22 | } 23 | -------------------------------------------------------------------------------- /process/0.24mm Draft @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "brim_type": "no_brim", 3 | "default_acceleration": "7000", 4 | "from": "User", 5 | "inherits": "0.24mm Draft @BBL X1C", 6 | "initial_layer_acceleration": "400", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_speed": "120", 10 | "internal_solid_infill_speed": "120", 11 | "is_custom_defined": "0", 12 | "name": "0.24mm Draft @BBL X1C - SLOWED", 13 | "outer_wall_acceleration": "4000", 14 | "outer_wall_speed": "100", 15 | "print_settings_id": "0.24mm Draft @BBL X1C - SLOWED", 16 | "sparse_infill_pattern": "cubic", 17 | "sparse_infill_speed": "120", 18 | "top_surface_acceleration": "1000", 19 | "top_surface_speed": "100", 20 | "travel_speed": "400", 21 | "version": "1.7.0.18", 22 | "wall_loops": "3" 23 | } 24 | -------------------------------------------------------------------------------- /process/0.28mm Extra Draft @BBL X1C - SLOWED.json: -------------------------------------------------------------------------------- 1 | { 2 | "default_acceleration": "5000", 3 | "from": "User", 4 | "gap_infill_speed": "100", 5 | "inherits": "0.28mm Extra Draft @BBL X1C", 6 | "initial_layer_acceleration": "250", 7 | "initial_layer_infill_speed": "60", 8 | "initial_layer_speed": "40", 9 | "inner_wall_acceleration": "5000", 10 | "inner_wall_speed": "100", 11 | "internal_solid_infill_speed": "100", 12 | "is_custom_defined": "0", 13 | "name": "0.28mm Extra Draft @BBL X1C - SLOWED", 14 | "outer_wall_acceleration": "2500", 15 | "outer_wall_speed": "100", 16 | "print_settings_id": "0.28mm Extra Draft @BBL X1C - SLOWED", 17 | "sparse_infill_pattern": "cubic", 18 | "sparse_infill_speed": "100", 19 | "top_surface_acceleration": "1000", 20 | "top_surface_speed": "100", 21 | "travel_acceleration": "5000", 22 | "version": "1.8.0.25" 23 | } 24 | -------------------------------------------------------------------------------- /process/README.md: -------------------------------------------------------------------------------- 1 | Naming Convention for Process User Presets 2 | 3 | `\ @\ - \` 4 | 5 | e.g 6 | 7 | `0.24mm Draft @BBL X1C - SLOWED` 8 | --------------------------------------------------------------------------------