├── .gitignore ├── COPYING.TXT ├── Open_Hardware_Logo └── Open_Hardware_Logo.zip ├── SketchUp_Part_Models ├── 1X03.skp ├── 1X06.skp ├── 1x10_PinHeader.skp ├── 2X05.skp ├── 4X6@1.skp ├── C0402.skp ├── C050-025X075.skp ├── C0603.skp ├── C0805.skp ├── C1206.skp ├── C402.skp ├── C603.skp ├── C805.skp ├── CHIP-LED0805.skp ├── CHIPLED_0805.skp ├── CONN_USB_MINI-B.skp ├── CW8A.skp ├── D2PACK.skp ├── DEC.skp ├── DIL-08.skp ├── DIL06.skp ├── DIL08.skp ├── DIP14.skp ├── DO323.skp ├── DO35-7.skp ├── DO41-7.6.skp ├── EIA3216.skp ├── EIA3528.skp ├── EIA6032.skp ├── EIA7343.skp ├── F1X1.skp ├── F1X10.skp ├── F1X11.skp ├── F1X12.skp ├── F1X13.skp ├── F1X14.skp ├── F1X15.skp ├── F1X16.skp ├── F1X17.skp ├── F1X18.skp ├── F1X19.skp ├── F1X2.skp ├── F1X20.skp ├── F1X3.skp ├── F1X4.skp ├── F1X5.skp ├── F1X6.skp ├── F1X7.skp ├── F1X8.skp ├── F1X9.skp ├── FB603.skp ├── Ferrite0805.skp ├── HC49U.skp ├── HC49UP.skp ├── HC49US.skp ├── HR911105A.skp ├── IC socket.skp ├── JUMPER.skp ├── LED-0603.skp ├── LED-805.skp ├── LED5MM.skp ├── LQFP64.skp ├── LSH43.skp ├── M0805.skp ├── M1206.skp ├── M1X1.skp ├── M1X10.skp ├── M1X2.skp ├── M1X3.skp ├── M1X4.skp ├── M1X5.skp ├── M1X6.skp ├── M1X8.skp ├── MA03-2.skp ├── MICROSD.skp ├── PINHEAD_-_COPY_PINSHRD_PTH_2X10.skp ├── PINSHRD_PTH_2X05B.skp ├── POWER_JACK_SMD.skp ├── PTC-1206.skp ├── QFN16.skp ├── QSE15X.skp ├── R0603.skp ├── R0805.skp ├── R1206.skp ├── R603.skp ├── R805.skp ├── RN8P-4R-CRA06S.skp ├── RTH025W.skp ├── SM06B-SRSS-TB.skp ├── SMC_A.skp ├── SO-08.skp ├── SO-08M.skp ├── SO08.skp ├── SO28W.skp ├── SOCKET-14.skp ├── SOCKET-28-3.skp ├── SOD-123.skp ├── SOD2514X100N.skp ├── SOD323.skp ├── SOIC8.skp ├── SOT-23-5.skp ├── SOT-23.skp ├── SOT223.skp ├── SOT23-BEC@1.skp ├── SOT23.skp ├── SSOP-28.skp ├── SSOP28.skp ├── TACTILE-PTH.skp ├── TACT_SWITCH_SMALL.skp ├── TC38H.skp ├── TO252.skp ├── TQFP-64-10X10.skp ├── TQFP100.skp ├── TQFP44.skp ├── TQFP64-10X10.skp ├── TSOP18XX.skp ├── TSSOP14.skp ├── VQ44.skp ├── W237-102.skp ├── WE-KI_0805_B.skp ├── XC-TQ100.skp └── contrib │ ├── 1X02.skp │ ├── 3.5mmSingleContact.skp │ ├── 39504xxxx.skp │ ├── 39506xxxx.skp │ ├── 47346-0001.skp │ ├── 5-534998.skp │ ├── 713085414.skp │ ├── 879141416.skp │ ├── ADTSM3.skp │ ├── ATOFuse.skp │ ├── ATOFuseClip.skp │ ├── Battery.skp │ ├── CAP_0603.skp │ ├── CAP_1206.skp │ ├── CPOL-RADIAL-PTH-.1X.25.skp │ ├── DIN Rail 100mm.skp │ ├── F25HP.skp │ ├── FB_0603.skp │ ├── FTSH-105-01-L-DH.skp │ ├── FTSH-105-01-L-DV.skp │ ├── IDGB2.skp │ ├── JUMPER_ATO.skp │ ├── Jack 3,5 mm.skp │ ├── Joystick.skp │ ├── LED-1206.skp │ ├── LED-1206_red.skp │ ├── MOLEX-1X2.skp │ ├── MOLEX-1X4.skp │ ├── MOLEX_44206-0007.skp │ ├── MagJack.skp │ ├── MiniSD.skp │ ├── NX5032GA.skp │ ├── PCI Express Extender with Clips.skp │ ├── PCI Express Extender with Pegs.skp │ ├── PCI Express Extender without Pegs.skp │ ├── Q26 Connector Header.skp │ ├── Q26 Connector Socket.skp │ ├── Q26.skp │ ├── QFN-32.skp │ ├── R2010.skp │ ├── R2512.skp │ ├── RES_0603.skp │ ├── SCREWTERMINAL-3.5MM-2_LOCK.skp │ ├── SIM Card with Holder.skp │ ├── SMA Antenna.skp │ ├── SMA Connector.skp │ ├── SMA Edge Connector.skp │ ├── SO16N.skp │ ├── SO20W.skp │ ├── SOD-323.skp │ ├── SOT143B.skp │ ├── SOT23-5.skp │ ├── SOT23-R.skp │ ├── SPARKFUN_1X20_LOCK.skp │ ├── Samtec SSW.skp │ ├── Screw M 2.9 x 6.5 (H).skp │ ├── Switch.skp │ ├── TRIMPOT-3MM.skp │ ├── U-FL Plug.skp │ ├── U-FL Socket.skp │ ├── USB Type B Connector.skp │ ├── UX60-MB-5ST.skp │ ├── atxSocket.skp │ ├── atxSocketKeyed.skp │ ├── iPod Connector.skp │ └── squonk.lbr ├── arts ├── dia │ ├── NPN.dia │ └── PNP.dia ├── images │ ├── NPN.png │ └── PNP.png └── sketches │ ├── npn-diagram.jpg │ └── pnp-diagram.jpg ├── dp_devices.lbr ├── dp_devices.v6.lbr ├── dp_pcb.lbr ├── eagle_2_partlist_table ├── V2 │ ├── COPYING.TXT │ ├── bom.txt │ ├── e2t.exe │ ├── eagle_2_partlist_table.zip │ ├── make-e2t.bat │ ├── parts.html │ └── run.bat ├── V3 │ ├── COPYING.TXT │ ├── bom.html │ ├── bom.txt │ ├── bom.wiki │ ├── e2t.cbp │ ├── e2t.cbp.save │ ├── e2t.layout │ ├── main.c │ ├── main.c.save │ └── partlist2html.exe ├── csv2html-wiki │ ├── Bus Blaster.csv │ ├── COPYING.TXT │ ├── busblaster.html │ ├── busblaster.wiki │ ├── csv2html-wiki.zip │ ├── csv2wiki.cbp │ ├── csv2wiki.cbp.save │ ├── csv2wiki.depend │ ├── csv2wiki.exe │ ├── csv2wiki.layout │ ├── csv2wiki.layout.save │ ├── main.c │ ├── main.c.save │ └── run.bat └── scripts │ └── csv2wiki-html │ ├── Bus Blaster.csv │ ├── COPYING.TXT │ ├── busblaster.html │ ├── busblaster.wiki │ ├── csv2html-wiki.zip │ ├── csv2wiki.cbp │ ├── csv2wiki.cbp.save │ ├── csv2wiki.depend │ ├── csv2wiki.exe │ ├── csv2wiki.layout │ ├── main.c │ ├── main.c.save │ └── run.bat ├── eagle_part_rename ├── COPYING.TXT ├── b.bom ├── eagle_part_rename.sln ├── eagle_part_rename.vcproj └── main.cpp ├── helpful_scripts ├── COPYING.TXT ├── hide_label_layers.scr ├── revert_layers.scr ├── show_all_bottom_layers.scr ├── show_all_top_layers.scr └── wherelabs_default.scr ├── helpful_ulps ├── COPYING.TXT ├── DP_exporterv1.ulp ├── DP_part2htmlwiki.ulp ├── DPgerbmerge.ulp ├── lbrbuild.ulp └── lbrdump.ulp └── script ├── 2032.sym.scr ├── 23AXX.sym.scr ├── 24AA.sym.scr ├── 25AA.sym.scr ├── 2801A.sym.scr ├── 2T45.sym.scr ├── 3WIRE.sym.scr ├── 4PWR8GND.sym.scr ├── 4T245.sym.scr ├── 555.sym.scr ├── 74138.sym.scr ├── 74141.sym.scr ├── 7416245.sym.scr ├── 74244.sym.scr ├── 74595.sym.scr ├── 74AC573.sym.scr ├── 74HC4017.sym.scr ├── 74LVC1G125.sym.scr ├── 74LVC245A.sym.scr ├── 7SEGCC.sym.scr ├── ADS831.sym.scr ├── ARDUINO.sym.scr ├── ATMEGA328P.sym.scr ├── ATMEGA32U4.sym.scr ├── BATT.sym.scr ├── BATT2032-1060TR.pac.scr ├── BATT2032.pac.scr ├── BATTERY_2032.dev.scr ├── BB_QFP_050.pac.scr ├── BB_QFP_050_065_BREAKOUT_BOARD.pac.scr ├── BB_QFP_050_BREAKOUT_BOARD.pac.scr ├── BB_QFP_065.pac.scr ├── BB_QFP_065_BREAKOUT_BOARD.pac.scr ├── BB_QFP_080.pac.scr ├── BB_QFP_080_050_BREAKOUT_BOARD.pac.scr ├── BB_QFP_080_065_BREAKOUT_BOARD.pac.scr ├── BB_QFP_080_BREAKOUT_BOARD.pac.scr ├── BB_XQFP_050.dev.scr ├── BB_XQFP_050.sym.scr ├── BB_XQFP_050_065.dev.scr ├── BB_XQFP_050_065.sym.scr ├── BB_XQFP_050_080.dev.scr ├── BB_XQFP_050_080.sym.scr ├── BB_XQFP_065.dev.scr ├── BB_XQFP_065.sym.scr ├── BB_XQFP_080.dev.scr ├── BB_XQFP_080.sym.scr ├── BB_XQFP_080_065.dev.scr ├── BB_XQFP_080_065.sym.scr ├── BGA-20.pac.scr ├── C0.1PTH.pac.scr ├── C1206.pac.scr ├── C402.pac.scr ├── C603.pac.scr ├── C805.pac.scr ├── CAP.sym.scr ├── CAPACITOR_NPOL.dev.scr ├── CAPACITOR_POL.dev.scr ├── CAP_POL.sym.scr ├── CASE_A.pac.scr ├── CASE_B.pac.scr ├── CAT16-F8_CAT16-J8.pac.scr ├── CH375.dev.scr ├── CH375.sym.scr ├── COIL.sym.scr ├── CON-EDGE-F-06X2.dev.scr ├── CON-EDGE-M-06X2.dev.scr ├── CON-RJ45-F.dev.scr ├── CON-USB-F-2PB.dev.scr ├── CON-USB-F.dev.scr ├── CON-USB-M.dev.scr ├── CONN_USB.sym.scr ├── CONN_USB_4P.sym.scr ├── CONN_USB_A_F.pac.scr ├── CONN_USB_A_MALE.pac.scr ├── CONN_USB_MICRO-B.pac.scr ├── CONN_USB_MINI-B.pac.scr ├── CON_ARDUINO.dev.scr ├── CON_ARDUINO.pac.scr ├── CON_ATX_PWR.dev.scr ├── CON_ATX_PWR_90DEG.pac.scr ├── CON_BUSPIRATE.dev.scr ├── CON_DC_M.dev.scr ├── CON_HEADER_1X01.dev.scr ├── CON_HEADER_1X02.dev.scr ├── CON_HEADER_1X03.dev.scr ├── CON_HEADER_1X04.dev.scr ├── CON_HEADER_1X05.dev.scr ├── CON_HEADER_1X06.dev.scr ├── CON_HEADER_1X08.dev.scr ├── CON_HEADER_2X02.dev.scr ├── CON_HEADER_2X03.dev.scr ├── CON_HEADER_2X04.dev.scr ├── CON_HEADER_2X05.dev.scr ├── CON_HEADER_2X06.dev.scr ├── CON_HEADER_2X07.dev.scr ├── CON_HEADER_2X08.dev.scr ├── CON_HEADER_2X10.dev.scr ├── CON_HEADER_PRG_AVR_ICSP.dev.scr ├── CON_HEADER_PRG_MSP_SBW.dev.scr ├── CON_HEADER_PRG_PIC_ICSP.dev.scr ├── CON_HEADER_PRG_XILINX_JTAG6.dev.scr ├── CON_MICROSD.dev.scr ├── CON_MICROSD.sym.scr ├── CON_MICROSD_HINGED.pac.scr ├── CON_MPB1_TEST_SOCKET.pac.scr ├── CON_PAD_ROUND_1.02MM.pac.scr ├── CON_PAD_ROUND_32MIL.pac.scr ├── CON_PAD_SQUARE_1.02MM.pac.scr ├── CON_PAD_SQUARE_32MIL.pac.scr ├── CON_POGO_ICSP_PROG.pac.scr ├── CON_POGO_ICSP_TARGET.pac.scr ├── CON_SOLO_STACKER_6.dev.scr ├── CON_SOLO_STACKER_6_CONNECTOR.pac.scr ├── CON_SOLO_STACKER_6_FOOTPRINT.pac.scr ├── CON_TERMINAL_BLOCK_02.dev.scr ├── CON_TERMINAL_BLOCK_03.dev.scr ├── CON_TEST_SOCKET.dev.scr ├── CRYSTAL.sym.scr ├── D2PAK.pac.scr ├── DBV-R-PDSO-G6.pac.scr ├── DCK_R_PDSO_G6.pac.scr ├── DCT_R_PDSO_G8.pac.scr ├── DCU_R_PDSO_G8.pac.scr ├── DC_BARREL_JACK_PTH_2MM.pac.scr ├── DC_BARREL_JACK_PTH_2MM_2.pac.scr ├── DC_BARREL_JACK_SMD_2MM.pac.scr ├── DC_JACK.sym.scr ├── DFN6_3X3.pac.scr ├── DFN8_3X2-EASY.pac.scr ├── DFN8_3X2.pac.scr ├── DFN8_3X3-EASY.pac.scr ├── DGK_S_PDSO_G8.pac.scr ├── DIL-14.sym.scr ├── DIL-16.sym.scr ├── DIL-18.sym.scr ├── DIL-20.sym.scr ├── DIL-24.sym.scr ├── DIL-28.sym.scr ├── DIL-5.sym.scr ├── DIL-6.sym.scr ├── DIL-8.sym.scr ├── DIL16.pac.scr ├── DIL18.pac.scr ├── DIL28-3.pac.scr ├── DIL28-N.pac.scr ├── DIL28-SMD.pac.scr ├── DINA4_L.sym.scr ├── DIODE.dev.scr ├── DIODE.sym.scr ├── DIODE_PHOTO_QSE15X.dev.scr ├── DIP14.pac.scr ├── DIP14W.pac.scr ├── DIP18.pac.scr ├── DIP20.pac.scr ├── DIP8.pac.scr ├── DISP_7SEG.dev.scr ├── DISP_7SEG.pac.scr ├── DISP_8X8_MATRIX_2020.pac.scr ├── DISP_D8035E.dev.scr ├── DISP_D8035E.pac.scr ├── DISP_D8035E.sym.scr ├── DISP_IN-12.sym.scr ├── DISP_IN-12_SOCKET.pac.scr ├── DISP_IN-12_SOCKET_CUTOUT.pac.scr ├── DISP_IN12A.dev.scr ├── DISP_LCD.dev.scr ├── DISP_LCD.sym.scr ├── DISP_LCD_4X20.pac.scr ├── DISP_MATRIX_8X8.dev.scr ├── DISP_MATRIX_8X8.sym.scr ├── DISP_OLED_96X16.dev.scr ├── DISP_TFT18.dev.scr ├── DISP_VFD_IV-22.dev.scr ├── DISP_VFD_IV-22.sym.scr ├── DO-214AC.pac.scr ├── DO323.pac.scr ├── DOCFIELD.sym.scr ├── DP100100_V1.pac.scr ├── DP10050_V1.pac.scr ├── DP10062_V1.pac.scr ├── DP10080_V1.pac.scr ├── DP3030_V1.pac.scr ├── DP4040_V1.pac.scr ├── DP5031_V1.pac.scr ├── DP5050_V1.pac.scr ├── DP6037_V1.pac.scr ├── DP6060_V1.pac.scr ├── DP7043_V1.pac.scr ├── DP7070_V1.pac.scr ├── DP8049_V1.pac.scr ├── DP8080_V1.pac.scr ├── DP8654_V1.pac.scr ├── DP9056_V1.pac.scr ├── DPAK.pac.scr ├── DP_LOGO.pac.scr ├── DP_LOGO.sym.scr ├── DP_LOGO_ART_0.5X0.5.pac.scr ├── DP_LOGO_ART_1.5X1.5.pac.scr ├── DP_LOGO_ART_1X1.pac.scr ├── DP_LOGO_ART_2.5X2.5.pac.scr ├── DP_LOGO_ART_2X2.pac.scr ├── DP_LOGO_ART_3X3.pac.scr ├── DS1085.sym.scr ├── DS1307.sym.scr ├── DSBGA-8.pac.scr ├── DSBGA-8_TI_R-XBGA-N8.pac.scr ├── DUAL_SCHMITT.sym.scr ├── EDGE_CONNECTOR_6X2.pac.scr ├── EDGE_CONNECTOR_6X2.sym.scr ├── EGDE2X10.pac.scr ├── EGDE2X9.pac.scr ├── ENC28J60.sym.scr ├── ENC424J600.sym.scr ├── ENCODER.sym.scr ├── ENCODER_SW1.dev.scr ├── EPM3064A.sym.scr ├── FAN5331.sym.scr ├── FB1206.pac.scr ├── FB402.pac.scr ├── FB603.pac.scr ├── FB805.pac.scr ├── FERRITE.dev.scr ├── FET.sym.scr ├── FRAME_DINA4_L.dev.scr ├── FT-2232.sym.scr ├── FT230X.sym.scr ├── FT232RL-VER2.sym.scr ├── FT232RL.sym.scr ├── FT311D.sym.scr ├── FUSE_PTC.dev.scr ├── FUSE_PTC.sym.scr ├── HC-49U-PTH.pac.scr ├── HC-49U.pac.scr ├── HDR-BUSPIRATE.pac.scr ├── HDR-BUSPIRATE.sym.scr ├── HEADER1X1.sym.scr ├── HEADER1X2.sym.scr ├── HEADER1X3.sym.scr ├── HEADER1X4.sym.scr ├── HEADER1X5.sym.scr ├── HEADER1X6.sym.scr ├── HEADER1X8.sym.scr ├── HEADER2X10.sym.scr ├── HEADER2X2.sym.scr ├── HEADER2X3.sym.scr ├── HEADER2X4.sym.scr ├── HEADER2X5.sym.scr ├── HEADER2X6.sym.scr ├── HEADER2X7.sym.scr ├── HEADER2X8.sym.scr ├── HEADER_PRG_1X04.pac.scr ├── HEADER_PRG_1X05.pac.scr ├── HEADER_PRG_1X05_ICSP_B.pac.scr ├── HEADER_PRG_1X06.pac.scr ├── HEADER_PRG_2X03.pac.scr ├── HR911105A.pac.scr ├── HR911105A.sym.scr ├── IC_555.dev.scr ├── IC_74141.dev.scr ├── IC_74AC573.dev.scr ├── IC_74AUP2G08.dev.scr ├── IC_74HC4017.dev.scr ├── IC_74HC595.dev.scr ├── IC_74LVC138A.dev.scr ├── IC_ADC_ADS831.dev.scr ├── IC_ADC_MAX111__.dev.scr ├── IC_BUFF_74LVC1G125.dev.scr ├── IC_BUFF_74LVC244A.dev.scr ├── IC_BUFF_74LVC245A.dev.scr ├── IC_BUFF_74_16245.dev.scr ├── IC_BUFF_SN74AVC2T45.dev.scr ├── IC_BUFF_SN74AVC4T245.dev.scr ├── IC_BUFF_SN74LVC1T45DBV.dev.scr ├── IC_BUFF_SN74LVC2G17.dev.scr ├── IC_BUFF_SN74LVC2T45DCT.dev.scr ├── IC_BUFF_SN74LVC8T245.dev.scr ├── IC_CPLD_EPM3064A.dev.scr ├── IC_CPLD_LC4032V.dev.scr ├── IC_CPLD_XC2C32A.dev.scr ├── IC_CPLD_XC3S250E_2.dev.scr ├── IC_CPLD_XC9572.dev.scr ├── IC_DIL14.dev.scr ├── IC_DIL16.dev.scr ├── IC_DIL18.dev.scr ├── IC_DIL20.dev.scr ├── IC_DIL24.dev.scr ├── IC_DIL28.dev.scr ├── IC_DIL8.dev.scr ├── IC_DS1085.dev.scr ├── IC_ENC28J60.dev.scr ├── IC_ENC424J600.dev.scr ├── IC_FAN5331.dev.scr ├── IC_FPGA_XC3S250E.dev.scr ├── IC_FPGA_XC6SLX9.dev.scr ├── IC_FT2232H.dev.scr ├── IC_FT230X.dev.scr ├── IC_FT232RL-VER2.dev.scr ├── IC_FT232RL.dev.scr ├── IC_FT311D.dev.scr ├── IC_INA138.dev.scr ├── IC_INA138.sym.scr ├── IC_KSZ8851SNL.dev.scr ├── IC_KSZ8851SNL.sym.scr ├── IC_LM4910.dev.scr ├── IC_LTC4053.dev.scr ├── IC_MAX14500.dev.scr ├── IC_MAX1896.dev.scr ├── IC_MAX31855.dev.scr ├── IC_MAX6921.dev.scr ├── IC_MBI5026.dev.scr ├── IC_MCP2200.dev.scr ├── IC_MCP3001.dev.scr ├── IC_MCP3021.dev.scr ├── IC_MCP4019.dev.scr ├── IC_MCP4131.dev.scr ├── IC_MCP4725.dev.scr ├── IC_MCP4901.dev.scr ├── IC_MCP73831.dev.scr ├── IC_MCP7940M.dev.scr ├── IC_MCP9701A.dev.scr ├── IC_MEM_23A__.dev.scr ├── IC_MEM_23K256.dev.scr ├── IC_MEM_23LC1024.dev.scr ├── IC_MEM_24AA_.dev.scr ├── IC_MEM_25XX__.dev.scr ├── IC_MEM_93C46.dev.scr ├── IC_MIC2027.dev.scr ├── IC_MIC2027.sym.scr ├── IC_MMA7455L.dev.scr ├── IC_OP-AMP_LM358.dev.scr ├── IC_OP-AMP_LMV321.dev.scr ├── IC_OPA2830.dev.scr ├── IC_PCF8563.dev.scr ├── IC_QFX12.dev.scr ├── IC_QFX16.dev.scr ├── IC_QFX20.dev.scr ├── IC_QFX24.dev.scr ├── IC_RTC_DS1307.dev.scr ├── IC_SI4707.dev.scr ├── IC_TC74.dev.scr ├── IC_TD62783.dev.scr ├── IC_TD62783.sym.scr ├── IC_TMP006.dev.scr ├── IC_TPIC6B595.dev.scr ├── IC_TPS2041B.dev.scr ├── IC_TPS6120X.dev.scr ├── IC_TXB0108.dev.scr ├── IC_UC_ATMEGA328P.dev.scr ├── IC_UC_ATMEGA32U4.dev.scr ├── IC_UC_LPC1343.dev.scr ├── IC_UC_MSP430F2132.dev.scr ├── IC_UC_MSP430G2231.dev.scr ├── IC_UC_PIC10F22_.dev.scr ├── IC_UC_PIC12F1822.dev.scr ├── IC_UC_PIC12F508.dev.scr ├── IC_UC_PIC16F1823.dev.scr ├── IC_UC_PIC16F1829.dev.scr ├── IC_UC_PIC18F44J50.dev.scr ├── IC_UC_PIC18FJ2_50.dev.scr ├── IC_UC_PIC24F16KA102.dev.scr ├── IC_UC_PIC24FJ256GB106.dev.scr ├── IC_UC_PIC24FJ256GB110.dev.scr ├── IC_UC_PIC24FJ64GA002.dev.scr ├── IC_UC_PIC24FJ64GB002.dev.scr ├── IC_UC_PIC24J___GP106.dev.scr ├── IC_UC_STM32.dev.scr ├── IC_UC_STM32F103RBTXX.dev.scr ├── IC_ULN2003.dev.scr ├── IC_ULN2803A.dev.scr ├── IC_USB2514.dev.scr ├── IC_USBLC6-2.dev.scr ├── IC_W25X10.dev.scr ├── INDUCTOR.dev.scr ├── INDUCTOR.sym.scr ├── JOYSTICK.dev.scr ├── JOYSTICK.pac.scr ├── JOYSTICK.sym.scr ├── JOYSTICK_SF303GJ26-3.dev.scr ├── JOYSTICK_SF303GJ26-3.pac.scr ├── JOYSTICK_SF303GJ26-3.sym.scr ├── JP3_0805.pac.scr ├── JUMP2X2_DESC.pac.scr ├── JUMP2X2_DESC.sym.scr ├── JUMP2_DESC.pac.scr ├── JUMP2_DESC.sym.scr ├── JUMP2_DESC_OFF.pac.scr ├── JUMP2_DESC_ON.pac.scr ├── JUMP3.sym.scr ├── JUMP3_DESC.pac.scr ├── JUMP3_DESC.sym.scr ├── JUMP3_DESC_LEFT.pac.scr ├── JUMP3_DESC_RIGHT.pac.scr ├── JUMPER_1X3.dev.scr ├── JUMPER_SOLDER.pac.scr ├── JUMPER_SOLDER_1X2.dev.scr ├── JUMPER_SOLDER_1X2.pac.scr ├── JUMP_SOLDER_1X2.sym.scr ├── L10.pac.scr ├── L1812.pac.scr ├── LABEL_JUMPER_1X2.dev.scr ├── LABEL_JUMPER_1X3.dev.scr ├── LABEL_JUMPER_2X2.dev.scr ├── LC4032V.sym.scr ├── LCD_SPI.sym.scr ├── LD-1117.sym.scr ├── LED-3MM.pac.scr ├── LED-5MM-90DEG.pac.scr ├── LED-5MM.pac.scr ├── LED-603.pac.scr ├── LED-805.pac.scr ├── LED.dev.scr ├── LED.sym.scr ├── LED_5050.pac.scr ├── LED_RGB.dev.scr ├── LED_RGB2.dev.scr ├── LED_RGB3.dev.scr ├── LED_RGB_5050.dev.scr ├── LED_RGB_5050.sym.scr ├── LGA-14.pac.scr ├── LM4910.sym.scr ├── LOGIC_AND.sym.scr ├── LOGO_CC-0.dev.scr ├── LOGO_CC-0.pac.scr ├── LOGO_CC-0.sym.scr ├── LOGO_CC-BY-SA.dev.scr ├── LOGO_CC-BY-SA.pac.scr ├── LOGO_CC_BY_SA.sym.scr ├── LOGO_DP.dev.scr ├── LOGO_FLAME.pac.scr ├── LPC1343.sym.scr ├── LQFP-32.pac.scr ├── LQFP48.pac.scr ├── LQFP64.pac.scr ├── LTC4053.sym.scr ├── M1X1.pac.scr ├── M1X2.pac.scr ├── M1X2_08_17.pac.scr ├── M1X2_10_17.pac.scr ├── M1X2_MALE_RIGHT_ANGLED.pac.scr ├── M1X3.pac.scr ├── M1X3_MALE_RIGHT_ANGLED.pac.scr ├── M1X4.pac.scr ├── M1X5.pac.scr ├── M1X6.pac.scr ├── M1X6_MALE_RIGHT_ANGLED.pac.scr ├── M1X6_MALE_RIGHT_ANGLED_SMD.pac.scr ├── M1X6_SMD.pac.scr ├── M1X8.pac.scr ├── M1X8_SMD.pac.scr ├── M2X10.pac.scr ├── M2X2.pac.scr ├── M2X3.pac.scr ├── M2X3_SMD.pac.scr ├── M2X4.pac.scr ├── M2X5.pac.scr ├── M2X6.pac.scr ├── M2X7.pac.scr ├── M2X8.pac.scr ├── MAX111__.sym.scr ├── MAX14500.sym.scr ├── MAX1896.sym.scr ├── MAX31855.sym.scr ├── MAX6921.sym.scr ├── MBI5026.sym.scr ├── MCP2200.sym.scr ├── MCP3001.sym.scr ├── MCP3021.sym.scr ├── MCP4019.sym.scr ├── MCP4131.sym.scr ├── MCP4725.sym.scr ├── MCP4901.sym.scr ├── MCP73831.sym.scr ├── MCP7940M.sym.scr ├── MCP9701A.sym.scr ├── MIC5205.sym.scr ├── MMA7455L.sym.scr ├── MODULE_MRF24WBOMA.dev.scr ├── MRF24WBOMA.pac.scr ├── MRF24WBOMA.sym.scr ├── MSOP-10.pac.scr ├── MSOP8.pac.scr ├── MSP430F21X2.sym.scr ├── MSP430G2XX1.sym.scr ├── N-MOSFET.sym.scr ├── NPN.sym.scr ├── OLED96X16.pac.scr ├── OLED96X16.sym.scr ├── OPA2830.sym.scr ├── OPAMP.sym.scr ├── OPAMP_V+-.sym.scr ├── OPAMP_V+GND.sym.scr ├── OSC-OSCILLATOR.dev.scr ├── OSC-XTAL.dev.scr ├── OSCILLATOR.sym.scr ├── OSCILLATOR_7X5_SMD.pac.scr ├── P-MOSFET.sym.scr ├── PAD_ROUND_4.1MM.pac.scr ├── PAD_TERMINAL.dev.scr ├── PCB_DP_RECTANGLE.dev.scr ├── PCB_DP_SQUARE.dev.scr ├── PCB_EDGE_CONNECTOR_6X2.pac.scr ├── PCB_STANDARD.sym.scr ├── PCF8563.sym.scr ├── PEC12_INCREMENTAL_ENCODER.pac.scr ├── PIC10F22X.sym.scr ├── PIC12F1822.sym.scr ├── PIC12F508.sym.scr ├── PIC16(L)F1829.sym.scr ├── PIC16F1823.sym.scr ├── PIC18F44J50.sym.scr ├── PIC18FJ2X50.sym.scr ├── PIC24F16KA102.sym.scr ├── PIC24FJ128GA.sym.scr ├── PIC24FJ256GB106.sym.scr ├── PIC24FJ256GB110.sym.scr ├── PIC24FJ64GA002.sym.scr ├── PIC24FJ64GB002.sym.scr ├── PINSHRD_PTH_2X05.pac.scr ├── PINSHRD_PTH_2X05B.pac.scr ├── PINSHRD_PTH_2X06.pac.scr ├── PINSHRD_PTH_2X07.pac.scr ├── PINSHRD_PTH_2X10.pac.scr ├── PINSHRD_SMT_2X05.pac.scr ├── PINSHRD_SMT_2X06.pac.scr ├── PLCC4.pac.scr ├── PNP.sym.scr ├── POT.sym.scr ├── PRG_ICSP_AVR.sym.scr ├── PRG_ICSP_PIC.sym.scr ├── PRG_SBW_MSP.sym.scr ├── PROTO_VIAS_01X01.dev.scr ├── PROTO_VIAS_01X01.pac.scr ├── PROTO_VIAS_01X01_1.2.pac.scr ├── PROTO_VIAS_05X05.dev.scr ├── PROTO_VIAS_05X05.pac.scr ├── PROTO_VIAS_05X05_1.2.pac.scr ├── PTC0805.pac.scr ├── PTC1812L.pac.scr ├── QFN-10-GND.sym.scr ├── QFN-10.pac.scr ├── QFN-20.pac.scr ├── QFN12_3X3.pac.scr ├── QFN16_3X3.pac.scr ├── QFN16_4X4-2.pac.scr ├── QFN16_4X4.pac.scr ├── QFN20_4X4.pac.scr ├── QFN24_4X4.pac.scr ├── QFN25_5X5.pac.scr ├── QFN25_GND.sym.scr ├── QFN32_5X5.pac.scr ├── QFN36_6X6.pac.scr ├── QFX-12.sym.scr ├── QFX-16.sym.scr ├── QFX-20.sym.scr ├── QFX-24.sym.scr ├── QFX-XPAD-3.sym.scr ├── QFX-XPAD-4.sym.scr ├── QFX-XPAD-6.sym.scr ├── QSE15X.pac.scr ├── QSE15X.sym.scr ├── R1206.pac.scr ├── R402.pac.scr ├── R603.pac.scr ├── R805.pac.scr ├── RESISTOR.dev.scr ├── RESISTOR.sym.scr ├── RESISTOR_ARRAY_4.dev.scr ├── RESISTOR_ARRAY_8.dev.scr ├── RGB.sym.scr ├── RGB3.sym.scr ├── RGBLED.pac.scr ├── RGBLED.sym.scr ├── RGBLED1206.pac.scr ├── RN8P-4R-CRA06S.pac.scr ├── RTH025W.pac.scr ├── SI4707.sym.scr ├── SLIDE_SWITCH_SMD.pac.scr ├── SLIDE_SWITCH_SMD.sym.scr ├── SMC_A.pac.scr ├── SMC_B.pac.scr ├── SMC_C.pac.scr ├── SMDPAD05X05.pac.scr ├── SN74AVC4T245.sym.scr ├── SN74LVC1T45.sym.scr ├── SN74LVC2T45.sym.scr ├── SN74LVC8T245.sym.scr ├── SO-18.pac.scr ├── SO-18L.pac.scr ├── SO-8.pac.scr ├── SOD-123.pac.scr ├── SOD-323F.pac.scr ├── SOIC-14.pac.scr ├── SOIC-14NW.pac.scr ├── SOIC-14W.pac.scr ├── SOIC-16.pac.scr ├── SOIC-16NW.pac.scr ├── SOIC-16W.pac.scr ├── SOIC-18NW.pac.scr ├── SOIC-18W.pac.scr ├── SOIC-20.pac.scr ├── SOIC-20NW.pac.scr ├── SOIC-24-01.pac.scr ├── SOIC-24.pac.scr ├── SOIC-24NW.pac.scr ├── SOIC-28NW.pac.scr ├── SOIC-28W.pac.scr ├── SOIC-8.pac.scr ├── SOIC-8NW.pac.scr ├── SOIC-8W.pac.scr ├── SOT-223.pac.scr ├── SOT-23-5.pac.scr ├── SOT-23-5LT.pac.scr ├── SOT-23-6.pac.scr ├── SOT-23-6L.pac.scr ├── SOT-23.pac.scr ├── SRAM-23LCXXXX.sym.scr ├── SRAM.sym.scr ├── SSOP-16-FTDI.pac.scr ├── SSOP-16.pac.scr ├── SSOP-20-DBQ.pac.scr ├── SSOP-20.pac.scr ├── SSOP-28.pac.scr ├── SSOP-48DL.pac.scr ├── STM32-48.sym.scr ├── STM32F103RX.sym.scr ├── SUPPLY.sym.scr ├── SUPPLY_+12V.dev.scr ├── SUPPLY_+12V.sym.scr ├── SUPPLY_+3V3.dev.scr ├── SUPPLY_+3V3.sym.scr ├── SUPPLY_+5V.dev.scr ├── SUPPLY_+5V.sym.scr ├── SUPPLY_-12V.dev.scr ├── SUPPLY_-12V.sym.scr ├── SUPPLY_-5V.dev.scr ├── SUPPLY_-5V.sym.scr ├── SUPPLY_GND.dev.scr ├── SUPPLY_GND.sym.scr ├── SUPPLY_VUSB.dev.scr ├── SUPPLY_VUSB.sym.scr ├── SW-SMT-4.pac.scr ├── SWITCH_1.sym.scr ├── SWITCH_2.sym.scr ├── SWITCH_3.sym.scr ├── SWITCH_4.sym.scr ├── SW_DIP_4P.dev.scr ├── SW_DPDT.sym.scr ├── SW_MEMBRANE.dev.scr ├── SW_MEMBRANE.pac.scr ├── SW_MEMBRANE.sym.scr ├── SW_PUSH_BUTTON_MINI.pac.scr ├── SW_PUSH_DPDT.dev.scr ├── SW_SLIDE.dev.scr ├── SW_TACT_2P.dev.scr ├── SW_TACT_3X6.pac.scr ├── SW_TACT_4P.dev.scr ├── SW_TACT_4P_B.dev.scr ├── SW_TACT_SMALL.pac.scr ├── SW_TACT_STANDARD_RIGHT_ANGLE.pac.scr ├── TC-26.pac.scr ├── TC-38.pac.scr ├── TC74.sym.scr ├── TERMINAL.sym.scr ├── TERMINAL_BLOCK_2P_5.pac.scr ├── TERMINAL_BLOCK_3P_5.pac.scr ├── TFT18.pac.scr ├── TI-R-XBGA-N8.pac.scr ├── TMP006.sym.scr ├── TO-220-2.pac.scr ├── TO-220H.pac.scr ├── TO-220V-5.pac.scr ├── TO-220V.pac.scr ├── TO-92.pac.scr ├── TPIC6B595.sym.scr ├── TPS2041B.sym.scr ├── TPS6120X.sym.scr ├── TQFN-40-5X5.pac.scr ├── TQFP-100-12X12.pac.scr ├── TQFP-100.pac.scr ├── TQFP-144.pac.scr ├── TQFP-44.pac.scr ├── TQFP-64-10X10.pac.scr ├── TRANSISTOR_BJT_NPN.dev.scr ├── TRANSISTOR_BJT_PNP.dev.scr ├── TRANSISTOR_FET-N.dev.scr ├── TRANSISTOR_FET_BS170.dev.scr ├── TRANSISTOR_FET_TSM2301CX.dev.scr ├── TRIMMER.dev.scr ├── TRIMMER_3306F.pac.scr ├── TRIMMER_3314G.pac.scr ├── TRIMMER_3362P.pac.scr ├── TSSOP-16.pac.scr ├── TSSOP-20.pac.scr ├── TSSOP-28.pac.scr ├── TSSOP-48.pac.scr ├── TXB0108.sym.scr ├── ULN2003.sym.scr ├── ULN2803.sym.scr ├── USB2514.sym.scr ├── USBLC.sym.scr ├── USB_BODY_PINS.sym.scr ├── USB_BODY_PINS2.sym.scr ├── USB_BODY_PINS_2P.sym.scr ├── VQ-100.pac.scr ├── VQ-44.pac.scr ├── VREG-3PIN-ALT.sym.scr ├── VREG-ADJ.sym.scr ├── VREG_3PINS.dev.scr ├── VREG_3PINS_ADJ-_.dev.scr ├── VREG_3PINS_ALT.dev.scr ├── VREG_5PINS.dev.scr ├── W25X10.sym.scr ├── XC2C32A_VQ44-IAN.sym.scr ├── XC3S100E.sym.scr ├── XC3S250E_VQ100.sym.scr ├── XC3S250E_VQ100_1532.sym.scr ├── XC6SLX9-3TQG144C.sym.scr ├── XC9572XL.sym.scr ├── XILINX_JTAG6.sym.scr ├── XTAL_4X6.pac.scr ├── XTAL_5X8.pac.scr ├── ZENER.dev.scr ├── ZENER.sym.scr └── librarydefaults.scr /.gitignore: -------------------------------------------------------------------------------- 1 | *.l#* -------------------------------------------------------------------------------- /Open_Hardware_Logo/Open_Hardware_Logo.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/Open_Hardware_Logo/Open_Hardware_Logo.zip -------------------------------------------------------------------------------- /SketchUp_Part_Models/1X03.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/1X03.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/1X06.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/1X06.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/1x10_PinHeader.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/1x10_PinHeader.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/2X05.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/2X05.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/4X6@1.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/4X6@1.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C0402.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C0402.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C050-025X075.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C050-025X075.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C402.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C402.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/C805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/C805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/CHIP-LED0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/CHIP-LED0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/CHIPLED_0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/CHIPLED_0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/CONN_USB_MINI-B.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/CONN_USB_MINI-B.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/CW8A.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/CW8A.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/D2PACK.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/D2PACK.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DEC.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DEC.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DIL-08.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DIL-08.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DIL06.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DIL06.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DIL08.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DIL08.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DIP14.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DIP14.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DO323.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DO323.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DO35-7.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DO35-7.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/DO41-7.6.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/DO41-7.6.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/EIA3216.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/EIA3216.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/EIA3528.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/EIA3528.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/EIA6032.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/EIA6032.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/EIA7343.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/EIA7343.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X1.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X1.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X10.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X10.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X11.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X11.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X12.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X12.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X13.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X13.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X14.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X14.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X15.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X15.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X16.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X16.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X17.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X17.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X18.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X18.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X19.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X19.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X2.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X2.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X20.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X20.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X3.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X3.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X4.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X4.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X5.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X5.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X6.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X6.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X7.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X7.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X8.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X8.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/F1X9.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/F1X9.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/FB603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/FB603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/Ferrite0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/Ferrite0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/HC49U.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/HC49U.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/HC49UP.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/HC49UP.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/HC49US.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/HC49US.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/HR911105A.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/HR911105A.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/IC socket.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/IC socket.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/JUMPER.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/JUMPER.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/LED-0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/LED-0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/LED-805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/LED-805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/LED5MM.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/LED5MM.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/LQFP64.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/LQFP64.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/LSH43.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/LSH43.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X1.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X1.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X10.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X10.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X2.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X2.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X3.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X3.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X4.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X4.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X5.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X5.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X6.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X6.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/M1X8.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/M1X8.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/MA03-2.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/MA03-2.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/MICROSD.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/MICROSD.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/PINHEAD_-_COPY_PINSHRD_PTH_2X10.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/PINHEAD_-_COPY_PINSHRD_PTH_2X10.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/PINSHRD_PTH_2X05B.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/PINSHRD_PTH_2X05B.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/POWER_JACK_SMD.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/POWER_JACK_SMD.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/PTC-1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/PTC-1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/QFN16.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/QFN16.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/QSE15X.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/QSE15X.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/R0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/R0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/R0805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/R0805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/R1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/R1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/R603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/R603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/R805.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/R805.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/RN8P-4R-CRA06S.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/RN8P-4R-CRA06S.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/RTH025W.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/RTH025W.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SM06B-SRSS-TB.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SM06B-SRSS-TB.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SMC_A.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SMC_A.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SO-08.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SO-08.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SO-08M.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SO-08M.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SO08.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SO08.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SO28W.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SO28W.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOCKET-14.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOCKET-14.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOCKET-28-3.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOCKET-28-3.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOD-123.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOD-123.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOD2514X100N.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOD2514X100N.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOD323.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOD323.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOIC8.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOIC8.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOT-23-5.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOT-23-5.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOT-23.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOT-23.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOT223.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOT223.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOT23-BEC@1.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOT23-BEC@1.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SOT23.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SOT23.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SSOP-28.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SSOP-28.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/SSOP28.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/SSOP28.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TACTILE-PTH.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TACTILE-PTH.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TACT_SWITCH_SMALL.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TACT_SWITCH_SMALL.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TC38H.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TC38H.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TO252.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TO252.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TQFP-64-10X10.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TQFP-64-10X10.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TQFP100.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TQFP100.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TQFP44.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TQFP44.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TQFP64-10X10.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TQFP64-10X10.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TSOP18XX.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TSOP18XX.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/TSSOP14.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/TSSOP14.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/VQ44.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/VQ44.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/W237-102.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/W237-102.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/WE-KI_0805_B.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/WE-KI_0805_B.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/XC-TQ100.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/XC-TQ100.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/1X02.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/1X02.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/3.5mmSingleContact.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/3.5mmSingleContact.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/39504xxxx.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/39504xxxx.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/39506xxxx.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/39506xxxx.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/47346-0001.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/47346-0001.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/5-534998.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/5-534998.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/713085414.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/713085414.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/879141416.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/879141416.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/ADTSM3.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/ADTSM3.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/ATOFuse.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/ATOFuse.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/ATOFuseClip.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/ATOFuseClip.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Battery.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Battery.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/CAP_0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/CAP_0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/CAP_1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/CAP_1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/CPOL-RADIAL-PTH-.1X.25.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/CPOL-RADIAL-PTH-.1X.25.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/DIN Rail 100mm.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/DIN Rail 100mm.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/F25HP.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/F25HP.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/FB_0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/FB_0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/FTSH-105-01-L-DH.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/FTSH-105-01-L-DH.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/FTSH-105-01-L-DV.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/FTSH-105-01-L-DV.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/IDGB2.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/IDGB2.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/JUMPER_ATO.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/JUMPER_ATO.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Jack 3,5 mm.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Jack 3,5 mm.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Joystick.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Joystick.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/LED-1206.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/LED-1206.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/LED-1206_red.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/LED-1206_red.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/MOLEX-1X2.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/MOLEX-1X2.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/MOLEX-1X4.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/MOLEX-1X4.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/MOLEX_44206-0007.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/MOLEX_44206-0007.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/MagJack.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/MagJack.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/MiniSD.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/MiniSD.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/NX5032GA.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/NX5032GA.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/PCI Express Extender with Clips.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/PCI Express Extender with Clips.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/PCI Express Extender with Pegs.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/PCI Express Extender with Pegs.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/PCI Express Extender without Pegs.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/PCI Express Extender without Pegs.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Q26 Connector Header.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Q26 Connector Header.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Q26 Connector Socket.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Q26 Connector Socket.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Q26.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Q26.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/QFN-32.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/QFN-32.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/R2010.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/R2010.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/R2512.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/R2512.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/RES_0603.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/RES_0603.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SCREWTERMINAL-3.5MM-2_LOCK.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SCREWTERMINAL-3.5MM-2_LOCK.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SIM Card with Holder.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SIM Card with Holder.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SMA Antenna.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SMA Antenna.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SMA Connector.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SMA Connector.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SMA Edge Connector.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SMA Edge Connector.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SO16N.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SO16N.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SO20W.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SO20W.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SOD-323.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SOD-323.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SOT143B.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SOT143B.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SOT23-5.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SOT23-5.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SOT23-R.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SOT23-R.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/SPARKFUN_1X20_LOCK.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/SPARKFUN_1X20_LOCK.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Samtec SSW.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Samtec SSW.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Screw M 2.9 x 6.5 (H).skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Screw M 2.9 x 6.5 (H).skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/Switch.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/Switch.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/TRIMPOT-3MM.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/TRIMPOT-3MM.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/U-FL Plug.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/U-FL Plug.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/U-FL Socket.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/U-FL Socket.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/USB Type B Connector.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/USB Type B Connector.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/UX60-MB-5ST.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/UX60-MB-5ST.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/atxSocket.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/atxSocket.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/atxSocketKeyed.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/atxSocketKeyed.skp -------------------------------------------------------------------------------- /SketchUp_Part_Models/contrib/iPod Connector.skp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/SketchUp_Part_Models/contrib/iPod Connector.skp -------------------------------------------------------------------------------- /arts/dia/NPN.dia: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/dia/NPN.dia -------------------------------------------------------------------------------- /arts/dia/PNP.dia: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/dia/PNP.dia -------------------------------------------------------------------------------- /arts/images/NPN.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/images/NPN.png -------------------------------------------------------------------------------- /arts/images/PNP.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/images/PNP.png -------------------------------------------------------------------------------- /arts/sketches/npn-diagram.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/sketches/npn-diagram.jpg -------------------------------------------------------------------------------- /arts/sketches/pnp-diagram.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/arts/sketches/pnp-diagram.jpg -------------------------------------------------------------------------------- /dp_devices.lbr: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/dp_devices.lbr -------------------------------------------------------------------------------- /dp_pcb.lbr: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/dp_pcb.lbr -------------------------------------------------------------------------------- /eagle_2_partlist_table/V2/e2t.exe: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/V2/e2t.exe -------------------------------------------------------------------------------- /eagle_2_partlist_table/V2/eagle_2_partlist_table.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/V2/eagle_2_partlist_table.zip -------------------------------------------------------------------------------- /eagle_2_partlist_table/V2/make-e2t.bat: -------------------------------------------------------------------------------- 1 | gcc eagle2table.c -o e2t.exe 2 | pause 3 | 4 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/V2/run.bat: -------------------------------------------------------------------------------- 1 | e2t bom.txt parts.html 2 | pause -------------------------------------------------------------------------------- /eagle_2_partlist_table/V3/e2t.layout: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/V3/partlist2html.exe: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/V3/partlist2html.exe -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/Bus Blaster.csv: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/csv2html-wiki/Bus Blaster.csv -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/busblaster.html: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/csv2html-wiki/busblaster.html -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/busblaster.wiki: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/csv2html-wiki/busblaster.wiki -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/csv2html-wiki.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/csv2html-wiki/csv2html-wiki.zip -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/csv2wiki.depend: -------------------------------------------------------------------------------- 1 | # depslib dependency file v1.0 2 | 1289574145 source:c:\users\jamz\desktop\dangerous-prototypes-open-hardware\trunk\eagle_2_partlist_table\csv2html-wiki\csv2wiki\main.c 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/csv2wiki.exe: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/csv2html-wiki/csv2wiki.exe -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/csv2wiki.layout: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/csv2wiki.layout.save: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/csv2html-wiki/run.bat: -------------------------------------------------------------------------------- 1 | csv2wiki --i "bus Blaster.csv" --wiki busblaster.wiki --html busblaster.html 2 | pause 3 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/Bus Blaster.csv: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/scripts/csv2wiki-html/Bus Blaster.csv -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/busblaster.html: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/scripts/csv2wiki-html/busblaster.html -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/busblaster.wiki: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/scripts/csv2wiki-html/busblaster.wiki -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/csv2html-wiki.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/scripts/csv2wiki-html/csv2html-wiki.zip -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/csv2wiki.depend: -------------------------------------------------------------------------------- 1 | # depslib dependency file v1.0 2 | 1289574145 source:c:\users\jamz\desktop\dangerous-prototypes-open-hardware\trunk\eagle_2_partlist_table\csv2html-wiki\csv2wiki\main.c 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/csv2wiki.exe: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/DangerousPrototypes/Eagle_Part_Library/3038a2e987f76bb26f595077a0ba581abe3a1466/eagle_2_partlist_table/scripts/csv2wiki-html/csv2wiki.exe -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/csv2wiki.layout: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | -------------------------------------------------------------------------------- /eagle_2_partlist_table/scripts/csv2wiki-html/run.bat: -------------------------------------------------------------------------------- 1 | csv2wiki --i "bus Blaster.csv" --wiki busblaster.wiki --html busblaster.html 2 | pause 3 | -------------------------------------------------------------------------------- /helpful_scripts/hide_label_layers.scr: -------------------------------------------------------------------------------- 1 | #default visible layers 2 | DISPLAY NONE 1 16 17 18 19 20 21 22 23 24 39 \ 3 | 40 41 42 48 49 50 51 52 56 101 102 104 116 \ 4 | 121 122 151 254; -------------------------------------------------------------------------------- /helpful_scripts/revert_layers.scr: -------------------------------------------------------------------------------- 1 | #default visible layers 2 | DISPLAY NONE 1 16 17 18 19 20 21 22 23 24 25 26 39 \ 3 | 40 41 42 48 49 50 51 52 56 101 102 104 116 \ 4 | 121 122 151 254; -------------------------------------------------------------------------------- /helpful_scripts/show_all_bottom_layers.scr: -------------------------------------------------------------------------------- 1 | display none 16 17 18 19 22 24 26 30; -------------------------------------------------------------------------------- /helpful_scripts/show_all_top_layers.scr: -------------------------------------------------------------------------------- 1 | display none 1 17 18 19 20 21 23 25 51; -------------------------------------------------------------------------------- /helpful_scripts/wherelabs_default.scr: -------------------------------------------------------------------------------- 1 | #units are in mil 2 | grid ON mil 50 ALT mil 12.5; 3 | #wire, pad and drill settings 4 | change width 12; 5 | change shape ROUND; 6 | #change drill 35; #35 for power 7 | change drill 20; #20 for signals -------------------------------------------------------------------------------- /script/2032.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit '2032.sym'; 10 | Pin 'V1' Pwr DotClk Short R0 Both 0 (-7.62 2.54); 11 | Pin 'V2' Pwr DotClk Short R0 Both 0 (-7.62 -2.54); 12 | Pin 'V-' Pwr None Short R180 Both 0 (7.62 0); 13 | Layer 95; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Change Font Vector; 17 | Text '>NAME' R0 (-5.08 5.715); 18 | Layer 94; 19 | Change Style Continuous; 20 | Wire 0.4064 (-5.08 5.08) (5.08 5.08) (5.08 -5.08) (-5.08 -5.08) \ 21 | (-5.08 5.08); 22 | Layer 96; 23 | Change Size 1.778; 24 | Change Ratio 8; 25 | Text '>VALUE' R0 (-5.08 -7.62); 26 | -------------------------------------------------------------------------------- /script/BATT.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'BATT.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-1.27 1.016) (1.27 1.016); 12 | Wire 0.4064 (-2.54 2.54) (2.54 2.54); 13 | Wire 0.4064 (-2.54 -0.508) (2.54 -0.508); 14 | Wire 0.4064 (-1.27 -2.286) (1.27 -2.286); 15 | Pin 'B+' Pwr None Short R270 Pad 0 (0 5.08); 16 | Pin 'B-' Pwr None Short R90 Pad 0 (0 -5.08); 17 | -------------------------------------------------------------------------------- /script/BATTERY_2032.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'BATTERY_2032.dev'; 10 | Prefix 'BATT'; 11 | Description 'BATTERY'; 12 | Value Off; 13 | Add 2032 'BATT' Next 0 (0 0); 14 | Package 'BATT2032' ''''''; 15 | Technology ''; 16 | Connect 'BATT.V1' 'V1' 'BATT.V2' 'V2' 'BATT.V-' 'V-'; 17 | -------------------------------------------------------------------------------- /script/C402.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'C402.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 0.7 0.9 -0 R0 (-0.65 0); 13 | Layer 1; 14 | Smd '2' 0.7 0.9 -0 R0 (0.65 0); 15 | Layer 51; 16 | Wire 0.1524 (-0.245 0.224) (0.245 0.224); 17 | Wire 0.1524 (0.245 -0.224) (-0.245 -0.224); 18 | Layer 51; 19 | Rect R0 (-0.554 -0.3048) (-0.254 0.2951); 20 | Layer 51; 21 | Rect R0 (0.2588 -0.3048) (0.5588 0.2951); 22 | Layer 25; 23 | Change Size 1.27; 24 | Change Ratio 10; 25 | Text '>NAME' R0 (-1.27 0.9525); 26 | Layer 27; 27 | Change Size 1.27; 28 | Change Ratio 10; 29 | Text '>VALUE' R0 (-1.27 -2.2225); 30 | -------------------------------------------------------------------------------- /script/C603.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'C603.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.1 1 -0 R0 (-0.85 0); 13 | Layer 1; 14 | Smd '2' 1.1 1 -0 R0 (0.85 0); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-1.27 0.9525); 19 | Layer 27; 20 | Change Size 1.27; 21 | Change Ratio 10; 22 | Text '>VALUE' R0 (-1.27 -2.2225); 23 | Layer 51; 24 | Rect R180 (0.3302 -0.4699) (0.8302 0.4801); 25 | Layer 51; 26 | Rect R0 (-0.8382 -0.4699) (-0.3381 0.4801); 27 | Layer 51; 28 | Wire 0.1016 (-0.356 0.432) (0.356 0.432); 29 | Wire 0.1016 (-0.356 -0.419) (0.356 -0.419); 30 | -------------------------------------------------------------------------------- /script/C805.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'C805.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.3 1.5 -0 R0 (-0.95 0); 13 | Layer 1; 14 | Smd '2' 1.3 1.5 -0 R0 (0.95 0); 15 | Layer 25; 16 | Change Size 1.016; 17 | Change Ratio 12; 18 | Text '>NAME' R0 (-1.27 1.27); 19 | Layer 27; 20 | Change Size 1.016; 21 | Change Ratio 12; 22 | Text '>VALUE' R0 (-1.27 -2.2225); 23 | Layer 51; 24 | Rect R0 (0.4064 -0.6985) (1.0564 0.7015); 25 | Layer 51; 26 | Rect R0 (-1.0668 -0.6985) (-0.4168 0.7015); 27 | Layer 51; 28 | Wire 0.127 (-0.41 0.635) (0.41 0.635); 29 | Wire 0.127 (-0.41 -0.635) (0.41 -0.635); 30 | -------------------------------------------------------------------------------- /script/CAP.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CAP.sym'; 10 | Pin '1' Pas None Short R270 Off 1 (0 5.08); 11 | Pin '2' Pas None Short R90 Off 1 (0 -2.54); 12 | Layer 95; 13 | Change Size 1.778; 14 | Change Ratio 8; 15 | Text '>NAME' R0 (2.54 5.08); 16 | Layer 96; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>VALUE' R0 (2.54 2.54); 20 | Layer 94; 21 | Rect R0 (-2.032 0.508) (2.032 1.016); 22 | Layer 94; 23 | Rect R0 (-2.032 1.524) (2.032 2.032); 24 | Layer 94; 25 | Wire 0.1524 (0 2.54) (0 2.032); 26 | Wire 0.1524 (0 0) (0 0.508); 27 | -------------------------------------------------------------------------------- /script/COIL.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'COIL.sym'; 10 | Layer 94; 11 | Wire 0.2032 (5.08 0) +180 (2.54 0) +180 (0 0) +180 (-2.54 0) +180 \ 12 | (-5.08 0); 13 | Pin '1' Pas None Short R0 Pad 0 (-7.62 0); 14 | Pin '2' Pas None Short R180 Pad 0 (7.62 0); 15 | Layer 95; 16 | Change Size 1.778; 17 | Change Ratio 8; 18 | Text '>NAME' R0 (-5.08 2.54); 19 | Layer 96; 20 | Change Size 1.778; 21 | Change Ratio 8; 22 | Text '>VALUE' R0 (-5.08 -2.54); 23 | -------------------------------------------------------------------------------- /script/CON-EDGE-F-06X2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON-EDGE-F-06X2.dev'; 10 | Prefix 'CON'; 11 | Description 'Female 6x2 Edge connector'; 12 | Value Off; 13 | Add EDGE_CONNECTOR_6X2 'CON' Next 0 (0 0); 14 | Package 'EDGE_CONNECTOR_6X2' ''''''; 15 | Technology ''; 16 | Connect 'CON.B3' '9' 'CON.A3' '3' 'CON.B2' '8' 'CON.B4' '10' 'CON.B5' '11' \ 17 | 'CON.B1' '7' 'CON.A1' '1' 'CON.A2' '2' 'CON.A4' '4' 'CON.A5' '5' 'CON.B6' '12' \ 18 | 'CON.A6' '6'; 19 | -------------------------------------------------------------------------------- /script/CON-EDGE-M-06X2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON-EDGE-M-06X2.dev'; 10 | Prefix 'CON'; 11 | Description 'Male 6x2 PCB Edge connector'; 12 | Value On; 13 | Add EDGE_CONNECTOR_6X2 'G$1' Next 0 (0 0); 14 | Package 'PCB_EDGE_CONNECTOR_6X2' ''''''; 15 | Technology ''; 16 | Connect 'G$1.A3' 'A3' 'G$1.A4' 'A4' 'G$1.A5' 'A5' 'G$1.A6' 'A6' 'G$1.A2' 'A2' \ 17 | 'G$1.A1' 'A1' 'G$1.B1' 'B1' 'G$1.B2' 'B2' 'G$1.B3' 'B3' 'G$1.B4' 'B4' 'G$1.B5' 'B5' \ 18 | 'G$1.B6' 'B6'; 19 | -------------------------------------------------------------------------------- /script/CON-RJ45-F.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON-RJ45-F.dev'; 10 | Prefix 'ETH'; 11 | Description 'HR911105A Female Ethernet RJ-45 with internal transformer and 2 LEDs'; 12 | Value Off; 13 | Add HR911105A 'ETH' Next 0 (0 0); 14 | Package 'HR911105A' ''''''; 15 | Technology ''; 16 | Connect 'ETH.1' '1' 'ETH.2' '2' 'ETH.3' '3' 'ETH.4' '4' 'ETH.5' '5' \ 17 | 'ETH.6' '6' 'ETH.9' '9' 'ETH.10' '10' 'ETH.11' '11' 'ETH.12' '12' 'ETH.13' '13' \ 18 | 'ETH.14' '14'; 19 | -------------------------------------------------------------------------------- /script/CON-USB-F-2PB.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON-USB-F-2PB.dev'; 10 | Prefix 'USB'; 11 | Description 'USB Female connector with 2 body pins'; 12 | Value Off; 13 | Add CONN_USB_4P 'USB' Next 0 (0 0); 14 | Add USB_BODY_PINS_2P 'B' Request 0 (-7.62 0); 15 | Package 'CONN_USB_A_F' ''''''; 16 | Technology ''; 17 | Connect 'USB.VUSB' '1' 'USB.D-' '2' 'USB.D+' '3' 'USB.GND' '4' 'B.BODY@1' 'B1' \ 18 | 'B.BODY@2' 'B2'; 19 | Grid inch; 20 | -------------------------------------------------------------------------------- /script/CON-USB-M.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON-USB-M.dev'; 10 | Prefix 'USB'; 11 | Description 'USB Male connector'; 12 | Value On; 13 | Add CONN_USB_4P 'USB' Always 0 (0 0); 14 | Add USB_BODY_PINS2 'BODY' Next 0 (-5.08 0); 15 | Package 'CONN_USB_A_MALE' '-A'; 16 | Technology ''; 17 | Connect 'USB.VUSB' 'VUSB' 'USB.D-' 'D-' 'USB.D+' 'D+' 'USB.GND' 'GND' 'BODY.BODY@1' 'BODY@1' \ 18 | 'BODY.BODY@2' 'BODY@2' 'BODY.BODY@4' 'BODY@4' 'BODY.BODY@3' 'BODY@3'; 19 | -------------------------------------------------------------------------------- /script/CONN_USB_4P.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CONN_USB_4P.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-5.08 7.62) (0 7.62) (0 -5.08) (-5.08 -5.08); 12 | Layer 94; 13 | Change Size 2.54; 14 | Change Ratio 10; 15 | Text 'USB' R90 (-2.54 -2.032); 16 | Pin 'GND' I/O None Middle R180 Pad 0 (5.08 5.08); 17 | Pin 'VUSB' I/O None Middle R180 Pad 0 (5.08 2.54); 18 | Pin 'D-' I/O None Middle R180 Pad 0 (5.08 0); 19 | Pin 'D+' I/O None Middle R180 Pad 0 (5.08 -2.54); 20 | -------------------------------------------------------------------------------- /script/CON_ATX_PWR.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_ATX_PWR.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER2X10 'J' Next 0 (0 0); 14 | Package 'CON_ATX_PWR_90DEG' '-90DEG'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.3' '2' 'J.5' '3' 'J.7' '4' 'J.9' '5' \ 17 | 'J.11' '6' 'J.13' '7' 'J.15' '8' 'J.17' '9' 'J.19' '10' 'J.2' '11' \ 18 | 'J.4' '12' 'J.6' '13' 'J.8' '14' 'J.10' '15' 'J.12' '16' 'J.14' '17' \ 19 | 'J.16' '18' 'J.18' '19' 'J.20' '20'; 20 | Grid inch; 21 | -------------------------------------------------------------------------------- /script/CON_BUSPIRATE.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_BUSPIRATE.dev'; 10 | Prefix 'J'; 11 | Description 'PIN HEADER'; 12 | Value On; 13 | Add HDR-BUSPIRATE 'A' Next 0 (0 0); 14 | Package 'HDR-BUSPIRATE' ''''''; 15 | Technology ''; 16 | Connect 'A.1' '1' 'A.2' '2' 'A.3' '3' 'A.4' '4' 'A.5' '5' \ 17 | 'A.6' '6' 'A.7' '7' 'A.8' '8'; 18 | -------------------------------------------------------------------------------- /script/CON_DC_M.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_DC_M.dev'; 10 | Prefix 'J'; 11 | Description 'DC power connector'; 12 | Value On; 13 | Add DC_JACK 'J' Next 0 (0 0); 14 | Package 'DC_BARREL_JACK_SMD_2MM' '-DC_SMD'; 15 | Technology ''; 16 | Connect 'J.P3' 'P3' 'J.P2' 'P2' 'J.P1' 'P1@2'; 17 | Package 'DC_BARREL_JACK_PTH_2MM' '-DC_PTH'; 18 | Technology ''; 19 | Connect 'J.P2' 'P3' 'J.P3' 'P2' 'J.P1' 'P1'; 20 | Package 'DC_BARREL_JACK_PTH_2MM_2' '-DC_PTH2'; 21 | Technology ''; 22 | Connect 'J.P2' 'P3' 'J.P3' 'P2' 'J.P1' 'P1'; 23 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X01.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X01.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X1 'J' Next 0 (0 0); 14 | Package 'M1X1' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1'; 17 | Package 'SMDPAD05X05' '-SMD'; 18 | Technology ''; 19 | Connect 'J.1' '1'; 20 | Package 'M1X2_08_17' '-PTH_08_17'; 21 | Technology ''; 22 | Connect 'J.1' '1'; 23 | Package 'M1X2_10_17' '-PTH_10_17'; 24 | Technology ''; 25 | Connect 'J.1' '1'; 26 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X02.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X02.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X2 'J' Next 0 (0 0); 14 | Package 'M1X2' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2'; 17 | Package 'M1X2_MALE_RIGHT_ANGLED' '-PTH_RIGHT_ANGLED'; 18 | Technology ''; 19 | Connect 'J.1' '1' 'J.2' '2'; 20 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X03.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X03.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X3 'J' Next 0 (0 0); 14 | Package 'M1X3' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3'; 17 | Package 'M1X3_MALE_RIGHT_ANGLED' '-PTH_RIGHT_ANGLED'; 18 | Technology ''; 19 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3'; 20 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X04.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X04.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X4 'J' Next 0 (0 0); 14 | Package 'M1X4' ''''''; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3' 'J.4' '4'; 17 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X05.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X05.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X5 'G$1' Next 0 (0 0); 14 | Package 'M1X5' '-PTH'; 15 | Technology ''; 16 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3' 'G$1.4' '4' 'G$1.5' '5'; 17 | -------------------------------------------------------------------------------- /script/CON_HEADER_1X08.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_1X08.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER1X8 'J' Next 0 (0 0); 14 | Package 'M1X8' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3' 'J.4' '4' 'J.5' '5' \ 17 | 'J.6' '6' 'J.7' '7' 'J.8' '8'; 18 | Package 'M1X8_SMD' '-SMD'; 19 | Technology ''; 20 | Connect 'J.1' '1' 'J.3' '3' 'J.5' '5' 'J.7' '7' 'J.2' '2' \ 21 | 'J.4' '4' 'J.6' '6' 'J.8' '8'; 22 | -------------------------------------------------------------------------------- /script/CON_HEADER_2X02.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_2X02.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER2X2 'J' Next 0 (0 0); 14 | Package 'M2X2' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3' 'J.4' '4'; 17 | -------------------------------------------------------------------------------- /script/CON_HEADER_2X03.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_2X03.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER2X3 'J' Next 0 (2.54 0); 14 | Package 'M2X3' '-PTH'; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3' 'J.4' '4' 'J.5' '5' \ 17 | 'J.6' '6'; 18 | Package 'M2X3_SMD' '-SMD'; 19 | Technology ''; 20 | Connect 'J.1' '1' 'J.3' '3' 'J.5' '5' 'J.6' '6' 'J.4' '4' \ 21 | 'J.2' '2'; 22 | -------------------------------------------------------------------------------- /script/CON_HEADER_2X04.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_2X04.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER2X4 'G$1' Next 0 (0 0); 14 | Package 'M2X4' '-PTH'; 15 | Technology ''; 16 | Connect 'G$1.P$1' '1' 'G$1.P$3' '3' 'G$1.P$5' '5' 'G$1.P$7' '7' 'G$1.P$8' '8' \ 17 | 'G$1.P$6' '6' 'G$1.P$4' '4' 'G$1.P$2' '2'; 18 | -------------------------------------------------------------------------------- /script/CON_HEADER_2X08.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_2X08.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add HEADER2X8 'J' Next 0 (0 0); 14 | Package 'M2X8' ''''''; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2' 'J.3' '3' 'J.4' '4' 'J.5' '5' \ 17 | 'J.6' '6' 'J.7' '7' 'J.8' '8' 'J.9' '9' 'J.10' '10' 'J.11' '11' \ 18 | 'J.12' '12' 'J.13' '13' 'J.14' '14' 'J.15' '15' 'J.16' '16'; 19 | -------------------------------------------------------------------------------- /script/CON_HEADER_PRG_AVR_ICSP.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_PRG_AVR_ICSP.dev'; 10 | Prefix 'J'; 11 | Description '2x3 AVR ICSP programming header'; 12 | Value Off; 13 | Add PRG_ICSP_AVR 'J' Next 0 (0 0); 14 | Package 'HEADER_PRG_2X03' '-PTH'; 15 | Technology ''; 16 | Connect 'J.MISO' '1' 'J.+V' '2' 'J.SCK' '3' 'J.MOSI' '4' 'J.RST' '5' \ 17 | 'J.GND' '6'; 18 | Package 'M2X3_SMD' '-SMD'; 19 | Technology ''; 20 | Connect 'J.MISO' '1' 'J.SCK' '3' 'J.RST' '5' 'J.GND' '6' 'J.MOSI' '4' \ 21 | 'J.+V' '2'; 22 | -------------------------------------------------------------------------------- /script/CON_HEADER_PRG_MSP_SBW.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_PRG_MSP_SBW.dev'; 10 | Prefix 'J'; 11 | Description '4-pin MSP Spy-Bi-Wire programming header'; 12 | Value Off; 13 | Add PRG_SBW_MSP 'J' Next 0 (0 0); 14 | Package 'HEADER_PRG_1X04' ''''''; 15 | Technology ''; 16 | Connect 'J.SBWTCK' '1' 'J.SBWTDIO' '2' 'J.+V' '3' 'J.GND' '4'; 17 | -------------------------------------------------------------------------------- /script/CON_HEADER_PRG_XILINX_JTAG6.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_HEADER_PRG_XILINX_JTAG6.dev'; 10 | Prefix 'J'; 11 | Description '6-pin Xilinx JTAG programming header'; 12 | Value Off; 13 | Add XILINX_JTAG6 'J' Next 0 (0 0); 14 | Package 'HEADER_PRG_1X06' ''''''; 15 | Technology ''; 16 | Connect 'J.+V' '1' 'J.GND' '2' 'J.TCK' '3' 'J.TDO' '4' 'J.TMS' '5' \ 17 | 'J.TDI' '6'; 18 | -------------------------------------------------------------------------------- /script/CON_MICROSD.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_MICROSD.dev'; 10 | Prefix ''; 11 | Description ''; 12 | Value Off; 13 | Add CON_MICROSD 'CON' Next 0 (0 0); 14 | Package 'CON_MICROSD_HINGED' 'HINGED'; 15 | Technology ''; 16 | Connect 'CON.DAT2' '1' 'CON.CD/DAT3' '2' 'CON.CMD' '3' 'CON.VDD' '4' 'CON.CLK' '5' \ 17 | 'CON.VSS' '6' 'CON.DAT0' '7' 'CON.DAT1' '8'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/CON_PAD_ROUND_1.02MM.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_PAD_ROUND_1.02MM.pac'; 10 | Description 'Round pad 1.02 mm drill 1.81 mm pad diameter'; 11 | Change Drill 1.02;Pad 'P' Round 1.81 R0 NOTHERMAL (0 0); 12 | -------------------------------------------------------------------------------- /script/CON_PAD_ROUND_32MIL.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_PAD_ROUND_32MIL.pac'; 10 | Description 'Round pad 0.81 mm (32 mil) drill 1.52 mm (60 mil) pad diameter'; 11 | Change Drill 0.8128;Pad 'P' Round 1.524 R0 NOTHERMAL (0 0); 12 | -------------------------------------------------------------------------------- /script/CON_PAD_SQUARE_1.02MM.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_PAD_SQUARE_1.02MM.pac'; 10 | Description 'Square pad 1.02 mm drill 1.81 mm pad diameter'; 11 | Change Drill 1.02;Pad 'P' Square 1.81 R0 NOTHERMAL (0 0); 12 | -------------------------------------------------------------------------------- /script/CON_PAD_SQUARE_32MIL.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_PAD_SQUARE_32MIL.pac'; 10 | Description 'Square pad 0.81 mm (32 mil) drill 1.52 mm (60 mil) pad diameter'; 11 | Change Drill 0.8128;Pad 'P' Square 1.524 R0 NOTHERMAL FIRST (0 0); 12 | -------------------------------------------------------------------------------- /script/CON_TERMINAL_BLOCK_02.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_TERMINAL_BLOCK_02.dev'; 10 | Prefix 'J'; 11 | Description '2 poles wire to board terminal block'; 12 | Value Off; 13 | Add HEADER1X2 'CON' Next 0 (0 0); 14 | Package 'TERMINAL_BLOCK_2P_5' '-5MM'; 15 | Technology ''; 16 | Connect 'CON.1' '1' 'CON.2' '2'; 17 | -------------------------------------------------------------------------------- /script/CON_TERMINAL_BLOCK_03.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_TERMINAL_BLOCK_03.dev'; 10 | Prefix 'J'; 11 | Description '3 poles, wire to board connector'; 12 | Value Off; 13 | Add HEADER1X3 'CON' Next 0 (0 0); 14 | Package 'TERMINAL_BLOCK_3P_5' '-5MM'; 15 | Technology ''; 16 | Connect 'CON.2' '2' 'CON.3' '3' 'CON.1' '1'; 17 | -------------------------------------------------------------------------------- /script/CON_TEST_SOCKET.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'CON_TEST_SOCKET.dev'; 10 | Prefix 'J'; 11 | Description '\ 12 | 2.0 mm diameter Test and measurement socket PCB mount\n\ 13 |
MPB 1 '; 14 | Value Off; 15 | Add HEADER1X2 'J' Next 0 (0 0); 16 | Package 'CON_MPB1_TEST_SOCKET' ''''''; 17 | Technology ''; 18 | Connect 'J.1' 'P1' 'J.2' 'P2'; 19 | -------------------------------------------------------------------------------- /script/DIODE.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DIODE.dev'; 10 | Prefix 'D'; 11 | Description 'Various Diode Packages'; 12 | Value On; 13 | Add DIODE 'D' Next 0 (0 0); 14 | Package 'DO323' '-DO323'; 15 | Technology ''; 16 | Connect 'D.C' 'C' 'D.A' 'A'; 17 | Package 'SOT-23' '-SOT23'; 18 | Technology ''; 19 | Connect 'D.C' '3' 'D.A' '1'; 20 | Package 'SOD-123' '-SOD-123'; 21 | Technology ''; 22 | Connect 'D.A' 'A' 'D.C' 'C'; 23 | Package 'DO-214AC' '-DO-214AC'; 24 | Technology ''; 25 | Connect 'D.A' '2' 'D.C' '1'; 26 | -------------------------------------------------------------------------------- /script/DIODE.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DIODE.sym'; 10 | Pin 'A' Pas None Short R0 Off 0 (-2.54 0); 11 | Pin 'C' Pas None Short R180 Off 0 (2.54 0); 12 | Layer 95; 13 | Change Size 1.778; 14 | Change Ratio 8; 15 | Text '>NAME' R0 (2.54 0.4826); 16 | Layer 96; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>VALUE' R0 (2.54 -2.3114); 20 | Layer 94; 21 | Wire 0.254 (-1.27 -1.27) (1.27 0) (-1.27 1.27); 22 | Wire 0.254 (1.27 1.27) (1.27 0); 23 | Wire 0.254 (-1.27 1.27) (-1.27 -1.27); 24 | Wire 0.254 (1.27 0) (1.27 -1.27); 25 | -------------------------------------------------------------------------------- /script/DIODE_PHOTO_QSE15X.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DIODE_PHOTO_QSE15X.dev'; 10 | Prefix 'D'; 11 | Description ''; 12 | Value Off; 13 | Add QSE15X 'G$1' Next 0 (-2.54 7.62); 14 | Package 'QSE15X' ''''''; 15 | Technology ''; 16 | Connect 'G$1.VCC' '1' 'G$1.OUT' '2' 'G$1.GND' '3'; 17 | -------------------------------------------------------------------------------- /script/DISP_7SEG.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_7SEG.dev'; 10 | Prefix '7SEG'; 11 | Description ''; 12 | Value Off; 13 | Add 7SEGCC 'G$1' Next 0 (-5.08 0); 14 | Package 'DISP_7SEG' ''''''; 15 | Technology ''; 16 | Connect 'G$1.C2' 'C2' 'G$1.F' 'F' 'G$1.G' 'G' 'G$1.A' 'A' 'G$1.B' 'B' \ 17 | 'G$1.C1' 'C1' 'G$1.C' 'C' 'G$1.DP' 'DP' 'G$1.D' 'D' 'G$1.E' 'E'; 18 | -------------------------------------------------------------------------------- /script/DISP_D8035E.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_D8035E.dev'; 10 | Prefix 'DISP'; 11 | Description '\ 12 | VFD 7-Segment Display\n\ 13 |
Mfr no: NEC LD8035E\n\ 14 |
D-8035-E PDF'; 15 | Value Off; 16 | Add DISP_D8035E 'DISP' Next 0 (0 0); 17 | Package 'DISP_D8035E' ''''''; 18 | Technology ''; 19 | Connect 'DISP.G' '8' 'DISP.F' '9' 'DISP.E' '10' 'DISP.D' '11' 'DISP.C' '12' \ 20 | 'DISP.F+' '1' 'DISP.DP' '2' 'DISP.GRID' '3' 'DISP.F-' '4' 'DISP.-' '5' 'DISP.B' '6' \ 21 | 'DISP.A' '7'; 22 | -------------------------------------------------------------------------------- /script/DISP_IN12A.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_IN12A.dev'; 10 | Prefix 'DISP'; 11 | Description 'IN-12A Nixie Display'; 12 | Value Off; 13 | Add DISP_IN-12 'DISP' Next 0 (0 0); 14 | Package 'DISP_IN-12_SOCKET' ''''''; 15 | Technology ''; 16 | Connect 'DISP.K7' '5' 'DISP.K6' '6' 'DISP.K5' '7' 'DISP.K4' '8' 'DISP.K3' '9' \ 17 | 'DISP.K2' '10' 'DISP.K1' '11' 'DISP.ANODE' '1' 'DISP.K0' '2' 'DISP.K9' '3' 'DISP.K8' '4'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/DISP_LCD.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_LCD.dev'; 10 | Prefix 'LCD'; 11 | Description ''; 12 | Value Off; 13 | Add DISP_LCD 'LCD' Next 0 (0 0); 14 | Package 'DISP_LCD_4X20' '-4X20'; 15 | Technology ''; 16 | Connect 'LCD.GND' '1' 'LCD.VCC' '2' 'LCD.CONTR' '3' 'LCD.RS' '4' 'LCD.R/W' '5' \ 17 | 'LCD.E' '6' 'LCD.D0' '7' 'LCD.D1' '8' 'LCD.D2' '9' 'LCD.D3' '10' 'LCD.D4' '11' \ 18 | 'LCD.D5' '12' 'LCD.D6' '13' 'LCD.D7' '14' 'LCD.A' '15' 'LCD.K' '16'; 19 | -------------------------------------------------------------------------------- /script/DISP_OLED_96X16.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_OLED_96X16.dev'; 10 | Prefix 'DISP'; 11 | Description ''; 12 | Value Off; 13 | Add OLED96X16 'G$1' Next 0 (-12.7 0); 14 | Package 'OLED96X16' ''''''; 15 | Technology ''; 16 | Connect 'G$1.SDA' '4' 'G$1.IREF' '5' 'G$1.VCOMH' '6' 'G$1.VCC' '7' 'G$1.VDD' '8' \ 17 | 'G$1.SCL' '3' 'G$1.RES#' '2' 'G$1.VSS' '1'; 18 | -------------------------------------------------------------------------------- /script/DISP_TFT18.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_TFT18.dev'; 10 | Prefix ''; 11 | Description ''; 12 | Value Off; 13 | Add LCD_SPI 'G$1' Next 0 (-10.16 0); 14 | Package 'TFT18' ''''''; 15 | Technology ''; 16 | Connect 'G$1.NC2' '14' 'G$1.GND3' '13' 'G$1.CS' '12' 'G$1.VCC2' '11' 'G$1.VCC1' '10' \ 17 | 'G$1.SCL' '9' 'G$1.SDA' '8' 'G$1.RS' '7' 'G$1.RST' '6' 'G$1.GND2' '5' 'G$1.LEDA' '4' \ 18 | 'G$1.LEDK' '3' 'G$1.GND1' '2' 'G$1.NC1' '1'; 19 | Grid inch; 20 | -------------------------------------------------------------------------------- /script/DISP_VFD_IV-22.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DISP_VFD_IV-22.dev'; 10 | Prefix 'DISP'; 11 | Description '\ 12 | 7-segment VFD Display
\n\ 13 | Dangerousprototypes.com'; 14 | Value Off; 15 | Add DISP_VFD_IV-22 'DISP' Next 0 (0 0); 16 | Package 'DISP_IN-12_SOCKET' ''''''; 17 | Technology ''; 18 | Connect 'DISP.FA' '5' 'DISP.GRID' '6' 'DISP.A' '7' 'DISP.B' '8' 'DISP.E' '10' \ 19 | 'DISP.G' '11' 'DISP.FB' '12' 'DISP.H' '1' 'DISP.F' '2' 'DISP.D' '3' 'DISP.C' '4'; 20 | -------------------------------------------------------------------------------- /script/DP_LOGO.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'DP_LOGO.sym'; 10 | Layer 94; 11 | Change Size 1.016; 12 | Change Ratio 8; 13 | Text 'DP LOGO ADDED' R0 (0 2.54); 14 | Layer 94; 15 | Change Size 1.016; 16 | Change Ratio 8; 17 | Text '>PROJECT=' R0 (0 0); 18 | Layer 94; 19 | Change Size 1.016; 20 | Change Ratio 8; 21 | Text '>LICENSE=' R0 (0 -2.54); 22 | -------------------------------------------------------------------------------- /script/ENCODER_SW1.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'ENCODER_SW1.dev'; 10 | Prefix 'SW'; 11 | Description 'Incremental Encoder with push switch'; 12 | Value Off; 13 | Add ENCODER 'ENCODER' Next 0 (0 -2.54); 14 | Add SW_MEMBRANE 'SW' Next 0 (0 12.7); 15 | Package 'PEC12_INCREMENTAL_ENCODER' '-PEC12'; 16 | Technology ''; 17 | Connect 'SW.1' 'P1' 'SW.2' 'P2' 'ENCODER.A' 'A' 'ENCODER.C' 'C' 'ENCODER.B' 'B'; 18 | Grid mil; 19 | -------------------------------------------------------------------------------- /script/FAN5331.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FAN5331.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-7.62 -5.08) (-7.62 5.08) (7.62 5.08) (7.62 -5.08) \ 12 | (-7.62 -5.08); 13 | Pin 'SW' I/O None Short R0 Both 0 (-10.16 2.54); 14 | Pin 'GND' I/O None Short R0 Both 0 (-10.16 0); 15 | Pin 'FB' I/O None Short R0 Both 0 (-10.16 -2.54); 16 | Pin '!SHDN' I/O None Short R180 Both 0 (10.16 -2.54); 17 | Pin 'VIN' I/O None Short R180 Both 0 (10.16 2.54); 18 | -------------------------------------------------------------------------------- /script/FB402.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FB402.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 0.7 0.9 -0 R0 (-0.65 0); 13 | Layer 1; 14 | Smd '2' 0.7 0.9 -0 R0 (0.65 0); 15 | Layer 51; 16 | Wire 0.1524 (-0.245 0.224) (0.245 0.224); 17 | Wire 0.1524 (0.245 -0.224) (-0.245 -0.224); 18 | Layer 51; 19 | Rect R0 (-0.554 -0.3048) (-0.254 0.2951); 20 | Layer 51; 21 | Rect R0 (0.2588 -0.3048) (0.5588 0.2951); 22 | Layer 25; 23 | Change Size 1.27; 24 | Change Ratio 10; 25 | Text '>NAME' R0 (-2.54 0.9525); 26 | Layer 27; 27 | Change Size 1.27; 28 | Change Ratio 10; 29 | Text '>VALUE' R0 (-2.54 -2.2225); 30 | -------------------------------------------------------------------------------- /script/FB603.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FB603.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.3 1.5 -0 R0 (-0.85 0); 13 | Layer 1; 14 | Smd '2' 1.3 1.5 -0 R0 (0.85 0); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-2.2225 1.27); 19 | Layer 27; 20 | Change Size 1.27; 21 | Change Ratio 10; 22 | Text '>VALUE' R0 (-2.2225 -2.54); 23 | Layer 51; 24 | Rect R0 (0.4064 -0.6985) (1.0564 0.7015); 25 | Layer 51; 26 | Rect R0 (-1.0668 -0.6985) (-0.4168 0.7015); 27 | Layer 51; 28 | Wire 0.1524 (-0.41 0.635) (0.41 0.635); 29 | Wire 0.1524 (-0.41 -0.635) (0.41 -0.635); 30 | -------------------------------------------------------------------------------- /script/FB805.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FB805.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.3 1.5 -0 R0 (-0.85 0); 13 | Layer 1; 14 | Smd '2' 1.3 1.5 -0 R0 (0.85 0); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-2.2225 1.27); 19 | Layer 27; 20 | Change Size 1.27; 21 | Change Ratio 10; 22 | Text '>VALUE' R0 (-2.2225 -2.54); 23 | Layer 51; 24 | Rect R0 (0.4064 -0.6985) (1.0564 0.7015); 25 | Layer 51; 26 | Rect R0 (-1.0668 -0.6985) (-0.4168 0.7015); 27 | Layer 51; 28 | Wire 0.1524 (-0.41 0.635) (0.41 0.635); 29 | Wire 0.1524 (-0.41 -0.635) (0.41 -0.635); 30 | -------------------------------------------------------------------------------- /script/FERRITE.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FERRITE.dev'; 10 | Prefix 'L'; 11 | Description 'Ferrite bead in various packages'; 12 | Value On; 13 | Add INDUCTOR 'L' Next 0 (0 0); 14 | Package 'FB1206' '-1206'; 15 | Technology ''; 16 | Connect 'L.2' '2' 'L.1' '1'; 17 | Package 'FB402' '-0402'; 18 | Technology ''; 19 | Connect 'L.1' '1' 'L.2' '2'; 20 | Package 'FB805' '-0805'; 21 | Technology ''; 22 | Connect 'L.1' '1' 'L.2' '2'; 23 | Package 'FB603' '-0603'; 24 | Technology ''; 25 | Connect 'L.1' '1' 'L.2' '2'; 26 | Package 'L10' '-PTH-10'; 27 | Technology ''; 28 | Connect 'L.2' '2' 'L.1' '1'; 29 | -------------------------------------------------------------------------------- /script/FUSE_PTC.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'FUSE_PTC.dev'; 10 | Prefix 'F'; 11 | Description 'Resettable PTC'; 12 | Value On; 13 | Add FUSE_PTC 'G$1' Next 0 (0 0); 14 | Package 'PTC0805' '-0805'; 15 | Technology ''; 16 | Connect 'G$1.1' '1' 'G$1.2' '2'; 17 | Package 'PTC1812L' '-1812'; 18 | Technology ''; 19 | Connect 'G$1.1' '1' 'G$1.2' '2'; 20 | -------------------------------------------------------------------------------- /script/HEADER1X1.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X1.sym'; 10 | Pin '1' Pas Dot Short R0 Pad 0 (0 0); 11 | Layer 94; 12 | Wire 0.4064 (3.81 2.54) (3.81 -2.54) (-1.27 -2.54) (-1.27 2.54) \ 13 | (3.81 2.54); 14 | -------------------------------------------------------------------------------- /script/HEADER1X2.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X2.sym'; 10 | Pin '1' Pas Dot Short R0 Pad 0 (0 0); 11 | Pin '2' Pas Dot Short R0 Pad 0 (0 -2.54); 12 | Layer 95; 13 | Change Size 1.778; 14 | Change Ratio 8; 15 | Text '>NAME' R0 (-1.27 3.81); 16 | Layer 94; 17 | Wire 0.4064 (-1.27 2.54) (3.81 2.54) (3.81 -5.08) (-1.27 -5.08) \ 18 | (-1.27 2.54); 19 | -------------------------------------------------------------------------------- /script/HEADER1X3.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X3.sym'; 10 | Pin '1' I/O Dot Short R0 Pad 0 (0 2.54); 11 | Pin '2' I/O Dot Short R0 Pad 0 (0 0); 12 | Pin '3' I/O Dot Short R0 Pad 0 (0 -2.54); 13 | Layer 94; 14 | Wire 0.4064 (-1.27 5.08) (3.81 5.08) (3.81 -5.08) (-1.27 -5.08) \ 15 | (-1.27 5.08); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (-1.27 6.35); 20 | -------------------------------------------------------------------------------- /script/HEADER1X4.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X4.sym'; 10 | Pin '1' I/O Dot Short R0 Pad 0 (0 2.54); 11 | Pin '2' I/O Dot Short R0 Pad 0 (0 0); 12 | Pin '3' I/O Dot Short R0 Pad 0 (0 -2.54); 13 | Layer 94; 14 | Wire 0.4064 (-1.27 5.08) (3.81 5.08) (3.81 -7.62) (-1.27 -7.62) \ 15 | (-1.27 5.08); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (-1.27 6.35); 20 | Pin '4' I/O Dot Short R0 Pad 0 (0 -5.08); 21 | -------------------------------------------------------------------------------- /script/HEADER1X5.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X5.sym'; 10 | Pin '1' I/O Dot Short R0 Pad 0 (0 5.08); 11 | Pin '2' I/O Dot Short R0 Pad 0 (0 2.54); 12 | Pin '3' I/O Dot Short R0 Pad 0 (0 0); 13 | Pin '4' I/O Dot Short R0 Pad 0 (0 -2.54); 14 | Pin '5' I/O Dot Short R0 Pad 0 (0 -5.08); 15 | Layer 94; 16 | Wire 0.4064 (-1.27 7.62) (3.81 7.62) (3.81 -7.62) (-1.27 -7.62) \ 17 | (-1.27 7.62); 18 | Layer 95; 19 | Change Size 1.778; 20 | Change Ratio 8; 21 | Text '>NAME' R0 (-1.27 8.255); 22 | -------------------------------------------------------------------------------- /script/HEADER1X6.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER1X6.sym'; 10 | Pin '1' I/O Dot Short R0 Pad 0 (0 5.08); 11 | Pin '2' I/O Dot Short R0 Pad 0 (0 2.54); 12 | Pin '3' Pas Dot Short R0 Pad 0 (0 0); 13 | Pin '4' Pas Dot Short R0 Pad 0 (0 -2.54); 14 | Pin '5' Pas Dot Short R0 Pad 0 (0 -5.08); 15 | Pin '6' Pas Dot Short R0 Pad 0 (0 -7.62); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (-1.27 8.89); 20 | Layer 94; 21 | Wire 0.4064 (-1.27 7.62) (-1.27 -10.16) (3.81 -10.16) (3.81 7.62) \ 22 | (-1.27 7.62); 23 | -------------------------------------------------------------------------------- /script/HEADER2X2.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER2X2.sym'; 10 | Pin '1' Pas Dot Short R0 Pad 0 (0 0); 11 | Pin '3' Pas Dot Short R0 Pad 0 (0 -2.54); 12 | Pin '2' Pas Dot Short R180 Pad 0 (7.62 0); 13 | Pin '4' Pas Dot Short R180 Pad 0 (7.62 -2.54); 14 | Layer 94; 15 | Wire 0.4064 (-1.27 2.54) (8.89 2.54) (8.89 -5.08) (-1.27 -5.08) \ 16 | (-1.27 2.54); 17 | Layer 95; 18 | Change Size 1.778; 19 | Change Ratio 8; 20 | Text '>NAME' R0 (-1.27 3.4925); 21 | -------------------------------------------------------------------------------- /script/HEADER2X3.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'HEADER2X3.sym'; 10 | Pin '1' Pas Dot Short R0 Pad 0 (0 2.54); 11 | Pin '3' Pas Dot Short R0 Pad 0 (0 0); 12 | Pin '5' Pas Dot Short R0 Pad 0 (0 -2.54); 13 | Pin '2' Pas Dot Short R180 Pad 0 (7.62 2.54); 14 | Pin '4' Pas Dot Short R180 Pad 0 (7.62 0); 15 | Pin '6' Pas Dot Short R180 Pad 0 (7.62 -2.54); 16 | Layer 94; 17 | Wire 0.4064 (-1.27 5.08) (8.89 5.08) (8.89 -5.08) (-1.27 -5.08) \ 18 | (-1.27 5.08); 19 | Layer 95; 20 | Change Size 1.778; 21 | Change Ratio 8; 22 | Text '>NAME' R0 (-1.27 6.0325); 23 | -------------------------------------------------------------------------------- /script/IC_555.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_555.dev'; 10 | Prefix 'IC'; 11 | Description 'Classic 555 IC'; 12 | Value Off; 13 | Add 555 'IC' Next 0 (0 0); 14 | Package 'SOIC-8' '-SOIC8'; 15 | Technology ''; 16 | Connect 'IC.TRIG' '2' 'IC.DIS' '7' 'IC.GND' '1' 'IC.OUT' '3' 'IC.RST' '4' \ 17 | 'IC.VCC' '8' 'IC.THR' '6' 'IC.CTRL' '5'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/IC_74141.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_74141.dev'; 10 | Prefix 'IC'; 11 | Description 'BCD to decimal decoder'; 12 | Value Off; 13 | Add 74141 'IC' Next 0 (0 0); 14 | Add SUPPLY 'SUPPLY' Next 0 (-22.86 -2.54); 15 | Package 'DIL16' '-DIP-16'; 16 | Technology ''; 17 | Connect 'IC.Q8' '1' 'IC.Q9' '2' 'IC.C' '7' 'IC.Q2' '8' 'IC.A' '3' \ 18 | 'IC.D' '4' 'IC.B' '6' 'SUPPLY.V+' '5' 'IC.Q3' '9' 'IC.Q7' '10' 'IC.Q6' '11' \ 19 | 'SUPPLY.GND' '12' 'IC.Q4' '13' 'IC.Q5' '14' 'IC.Q1' '15' 'IC.Q0' '16'; 20 | -------------------------------------------------------------------------------- /script/IC_74AUP2G08.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_74AUP2G08.dev'; 10 | Prefix 'IC'; 11 | Description '\ 12 | Dual 2 input NAND Gate Low Power\n\ 13 |
SN74AUP2G08 '; 14 | Value On; 15 | Add LOGIC_AND 'G1' Next 0 (0 0); 16 | Add LOGIC_AND 'G2' Next 0 (0 -12.7); 17 | Add SUPPLY 'S1' Next 0 (-17.78 0); 18 | Package 'DSBGA-8_TI_R-XBGA-N8' ''''''; 19 | Technology ''; 20 | Connect 'G2.I0' 'P5' 'G2.I1' 'P6' 'G1.O' 'P7' 'S1.V+' 'P8' 'G1.I0' 'P1' \ 21 | 'G1.I1' 'P2' 'G2.O' 'P3' 'S1.GND' 'P4'; 22 | -------------------------------------------------------------------------------- /script/IC_74HC4017.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_74HC4017.dev'; 10 | Prefix 'IC'; 11 | Description 'Decade counter'; 12 | Value Off; 13 | Add 74HC4017 'IC' Next 0 (0 0); 14 | Add SUPPLY 'SUPPLY' Request 0 (-20.32 0); 15 | Package 'TSSOP-16' '-TSSOP-16'; 16 | Technology ''; 17 | Connect 'IC.Q5' '1' 'IC.Q1' '2' 'IC.Q0' '3' 'IC.Q2' '4' 'IC.Q6' '5' \ 18 | 'IC.Q7' '6' 'IC.Q3' '7' 'SUPPLY.GND' '8' 'IC.Q8' '9' 'IC.Q4' '10' 'IC.Q9' '11' \ 19 | 'IC.!Q5-9' '12' 'IC.!CP1' '13' 'IC.CP0' '14' 'IC.MR' '15' 'SUPPLY.V+' '16'; 20 | -------------------------------------------------------------------------------- /script/IC_ADC_MAX111__.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_ADC_MAX111**.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MAX111** 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-6' '-SOT-23-6'; 15 | Technology ''; 16 | Connect 'G$1.VDD' '1' 'G$1.GND' '2' 'G$1.AIN' '3' 'G$1.SCLK' '4' 'G$1.DOUT' '5' \ 17 | 'G$1.!CS' '6'; 18 | -------------------------------------------------------------------------------- /script/IC_BUFF_74LVC1G125.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_BUFF_74LVC1G125.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add 74LVC1G125 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' ''''''; 15 | Technology ''; 16 | Connect 'G$1.OE' '1' 'G$1.A' '2' 'G$1.GND' '3' 'G$1.Y' '4' 'G$1.VCC' '5'; 17 | -------------------------------------------------------------------------------- /script/IC_BUFF_SN74AVC2T45.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_BUFF_SN74AVC2T45.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value On; 13 | Add 2T45 'G$1' Next 0 (0 0); 14 | Package 'DCT_R_PDSO_G8' 'DCT'; 15 | Technology ''; 16 | Connect 'G$1.VCCA' '1' 'G$1.A1' '2' 'G$1.A2' '3' 'G$1.GND' '4' 'G$1.DIR' '5' \ 17 | 'G$1.B2' '6' 'G$1.B1' '7' 'G$1.VCCB' '8'; 18 | Package 'DCU_R_PDSO_G8' 'DCU'; 19 | Technology ''; 20 | Connect 'G$1.VCCA' '1' 'G$1.A1' '2' 'G$1.A2' '3' 'G$1.GND' '4' 'G$1.DIR' '5' \ 21 | 'G$1.B2' '6' 'G$1.B1' '7' 'G$1.VCCB' '8'; 22 | -------------------------------------------------------------------------------- /script/IC_BUFF_SN74LVC1T45DBV.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_BUFF_SN74LVC1T45DBV.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add SN74LVC1T45 'G$1' Next 0 (0 0); 14 | Package 'DBV-R-PDSO-G6' ''''''; 15 | Technology ''; 16 | Connect 'G$1.VCCA' '1' 'G$1.GND' '2' 'G$1.A' '3' 'G$1.B' '4' 'G$1.VCCB' '6' \ 17 | 'G$1.DIR' '5'; 18 | -------------------------------------------------------------------------------- /script/IC_BUFF_SN74LVC2G17.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_BUFF_SN74LVC2G17.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value On; 13 | Add DUAL_SCHMITT 'G$1' Next 0 (-5.08 -2.54); 14 | Package 'DBV-R-PDSO-G6' 'DBV'; 15 | Technology ''; 16 | Connect 'G$1.1A' '1' 'G$1.GND' '2' 'G$1.2A' '3' 'G$1.2Y' '4' 'G$1.1Y' '6' \ 17 | 'G$1.VCC' '5'; 18 | Package 'DCK_R_PDSO_G6' 'DCK'; 19 | Technology ''; 20 | Connect 'G$1.1A' '1' 'G$1.GND' '2' 'G$1.2A' '3' 'G$1.2Y' '4' 'G$1.1Y' '6' \ 21 | 'G$1.VCC' '5'; 22 | -------------------------------------------------------------------------------- /script/IC_BUFF_SN74LVC2T45DCT.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_BUFF_SN74LVC2T45DCT.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add SN74LVC2T45 'G$1' Next 0 (0 0); 14 | Package 'DCT_R_PDSO_G8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.VCCA' '1' 'G$1.A1' '2' 'G$1.A2' '3' 'G$1.GND' '4' 'G$1.DIR' '5' \ 17 | 'G$1.B2' '6' 'G$1.B1' '7' 'G$1.VCCB' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_DS1085.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_DS1085.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add DS1085 'IC' Next 0 (0 0); 14 | Package 'SO-8' '-SO-8'; 15 | Technology ''; 16 | Connect 'IC.OUT1' '1' 'IC.OUT0' '2' 'IC.VCC' '3' 'IC.GND' '4' 'IC.CTRL0' '5' \ 17 | 'IC.CTRL1' '6' 'IC.SDA' '7' 'IC.SCL' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_FAN5331.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_FAN5331.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add FAN5331 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' '-SOT-23-5'; 15 | Technology ''; 16 | Connect 'G$1.SW' '1' 'G$1.GND' '2' 'G$1.FB' '3' 'G$1.!SHDN' '4' 'G$1.VIN' '5'; 17 | -------------------------------------------------------------------------------- /script/IC_FT230X.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_FT230X.dev'; 10 | Prefix 'IC'; 11 | Description 'BASIC USB to UART IC'; 12 | Value Off; 13 | Add FT230X 'IC' Next 0 (0 0); 14 | Package 'SSOP-16-FTDI' '-SSOP-16'; 15 | Technology ''; 16 | Connect 'IC.USB+' '8' 'IC.CBUS0' '15' 'IC.CBUS1' '14' 'IC.CBUS3' '16' 'IC.GND@2' '13' \ 17 | 'IC.VCC' '12' 'IC.!RESET' '11' 'IC.3V3OUT' '10' 'IC.USB-' '9' 'IC.TXD' '1' 'IC.!RTS' '2' \ 18 | 'IC.VCCIO' '3' 'IC.RXD' '4' 'IC.GND@1' '5' 'IC.!CTS' '6' 'IC.CBUS2' '7'; 19 | -------------------------------------------------------------------------------- /script/IC_INA138.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_INA138.dev'; 10 | Prefix 'IC'; 11 | Description '\ 12 | High Side Current Shunt Monitor\n\ 13 |
Mfr no: INA138NA/3K\n\ 14 |
INA138 '; 15 | Value Off; 16 | Add IC_INA138 'IC' Next 0 (0 0); 17 | Package 'SOT-23-5' ''''''; 18 | Technology ''; 19 | Connect 'IC.OUT' '1' 'IC.GND' '2' 'IC.VIN+' '3' 'IC.VIN-' '4' 'IC.V+' '5'; 20 | Grid inch; 21 | -------------------------------------------------------------------------------- /script/IC_LM4910.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_LM4910.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add LM4910 'G$1' Next 0 (0 0); 14 | Package 'SO-8' '-SO-8'; 15 | Technology ''; 16 | Connect 'G$1.IN1' '1' 'G$1.IN2' '2' 'G$1.!SHUTDOWN' '3' 'G$1.GND' '4' 'G$1.VDD' '5' \ 17 | 'G$1.VO3' '6' 'G$1.VO2' '7' 'G$1.VO1' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_LTC4053.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_LTC4053.dev'; 10 | Prefix 'IC'; 11 | Description 'USB Compatible Li-Ion Battery Charger'; 12 | Value Off; 13 | Add LTC4053 'IC' Next 0 (0 0); 14 | Package 'MSOP-10' '-MSOP-10'; 15 | Technology ''; 16 | Connect 'IC.GND@2' 'P11' 'IC.!ACPR' 'P10' 'IC.!SHDN' 'P8' 'IC.PROG' 'P7' 'IC.BAT' 'P9' \ 17 | 'IC.NTC' 'P6' 'IC.GND@1' 'P5' 'IC.TIMER' 'P4' 'IC.!FAULT' 'P3' 'IC.VCC' 'P2' 'IC.!CHRG' 'P1'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/IC_MAX1896.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MAX1896.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MAX1896 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-6' ''''''; 15 | Technology ''; 16 | Connect 'G$1.LX' '1' 'G$1.GND' '2' 'G$1.FB' '3' 'G$1.!SHDN' '4' 'G$1.SS' '5' \ 17 | 'G$1.IN' '6'; 18 | -------------------------------------------------------------------------------- /script/IC_MAX31855.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MAX31855.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MAX31855 'G$1' Next 0 (0 0); 14 | Package 'SO-8' '-SO-8'; 15 | Technology ''; 16 | Connect 'G$1.GND' '1' 'G$1.T-' '2' 'G$1.T+' '3' 'G$1.VCC' '4' 'G$1.SCK' '5' \ 17 | 'G$1.!CS' '6' 'G$1.SO' '7' 'G$1.DNC' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_MCP3001.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP3001.dev'; 10 | Prefix 'IC'; 11 | Description '10-Bit ADC with SPI interface'; 12 | Value Off; 13 | Add MCP3001 'IC' Next 0 (0 0); 14 | Package 'DIP8' '-DIP8'; 15 | Technology ''; 16 | Connect 'IC.VREF' '1' 'IC.+VIN' '2' 'IC.-VIN' '3' 'IC.VSS' '4' 'IC.!CS' '5' \ 17 | 'IC.SDO' '6' 'IC.SCK' '7' 'IC.VDD' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_MCP3021.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP3021.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value On; 13 | Add MCP3021 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' 'SOT-23-5'; 15 | Technology ''; 16 | Technology ''; 17 | Attribute MCP3021 'MCP3021' variable; 18 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3' 'G$1.4' '4' 'G$1.5' '5'; 19 | -------------------------------------------------------------------------------- /script/IC_MCP4019.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP4019.dev'; 10 | Prefix 'IC'; 11 | Description '\ 12 | 7-Bit Single I2C Digital Rheostat\n\ 13 | \n\ 14 | Source: http://ww1.microchip.com/downloads/en/DeviceDoc/22147a.pdf'; 15 | Value Off; 16 | Add MCP4019 'G$1' Next 0 (0 0); 17 | Package 'SOT-23-5LT' ''''''; 18 | Technology ''; 19 | Connect 'G$1.VDD' 'P1' 'G$1.VSS/B' 'P2' 'G$1.SCL' 'P3' 'G$1.SDA' 'P4' 'G$1.W' 'P5'; 20 | -------------------------------------------------------------------------------- /script/IC_MCP4131.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP4131.dev'; 10 | Prefix 'IC'; 11 | Description '\ 12 | 7/8 Bit SPI Digital POT with volatile memory\n\ 13 |
MCP4131 '; 14 | Value Off; 15 | Add MCP4131 'IC' Next 0 (0 0); 16 | Add SUPPLY 'SUP' Request 0 (-30.48 0); 17 | Package 'DIP8' ''''''; 18 | Technology ''; 19 | Connect 'IC.!CS' '1' 'IC.SCK' '2' 'IC.SDI/SDO' '3' 'SUP.GND' '4' 'IC.P0A' '5' \ 20 | 'IC.P0W' '6' 'IC.P0B' '7' 'SUP.V+' '8'; 21 | -------------------------------------------------------------------------------- /script/IC_MCP4725.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP4725.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value On; 13 | Add MCP4725 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-6' ''''''; 15 | Technology ''; 16 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3' 'G$1.4' '4' 'G$1.5' '5' \ 17 | 'G$1.6' '6'; 18 | -------------------------------------------------------------------------------- /script/IC_MCP4901.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP4901.dev'; 10 | Prefix 'IC'; 11 | Description '8-Bit SPI DAC'; 12 | Value Off; 13 | Add MCP4901 'IC' Next 0 (0 0); 14 | Package 'DIP8' '-DIP8'; 15 | Technology ''; 16 | Connect 'IC.VDD' '1' 'IC.!CS' '2' 'IC.SCK' '3' 'IC.SDI' '4' 'IC.!LDAC' '5' \ 17 | 'IC.VREF' '6' 'IC.VSS' '7' 'IC.VOUT' '8'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/IC_MCP73831.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP73831.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MCP73831 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' ''''''; 15 | Technology ''; 16 | Connect 'G$1.STAT' '1' 'G$1.VSS' '2' 'G$1.BAT' '3' 'G$1.VDD' '4' 'G$1.PROG' '5'; 17 | -------------------------------------------------------------------------------- /script/IC_MCP9701A.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MCP9701A.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MCP9701A 'IC' Next 0 (0 0); 14 | Package 'TO-92' '-TO92'; 15 | Technology ''; 16 | Connect 'IC.VSS' '3' 'IC.VDD' '1' 'IC.VOUT' '2'; 17 | -------------------------------------------------------------------------------- /script/IC_MEM_23A__.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_23A**.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add 23AXX 'G$1' Next 0 (0 0); 14 | Package 'SO-8' 'SO8'; 15 | Technology ''; 16 | Connect 'G$1./CS' '1' 'G$1.DO' '2' 'G$1.G' '4' 'G$1.DI' '5' 'G$1.CLK' '6' \ 17 | 'G$1./HOLD' '7' 'G$1.+' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_MEM_23K256.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_23K256.dev'; 10 | Prefix 'IC'; 11 | Description '256K SPI Bus Low power Serial SRAM'; 12 | Value Off; 13 | Add SRAM 'G$1' Next 0 (0 0); 14 | Package 'SOIC-8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.SO' '2' 'G$1.!HOLD' '7' 'G$1.!CS' '1' 'G$1.VSS' '4' 'G$1.VCC' '8' \ 17 | 'G$1.SCK' '6' 'G$1.SI' '5'; 18 | -------------------------------------------------------------------------------- /script/IC_MEM_23LC1024.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_23LC1024.dev'; 10 | Prefix 'IC'; 11 | Description '1Mbit SPI SRAM with Serial dual interface and Serial quad interface'; 12 | Value Off; 13 | Add SRAM-23LCXXXX 'IC' Next 0 (0 0); 14 | Add SUPPLY 'SUP' Request 0 (-20.32 2.54); 15 | Package 'SOIC-8' ''''''; 16 | Technology ''; 17 | Connect 'IC.SO/SIO1' '2' 'IC.!HOLD/SIO3' '7' 'IC.!CS' '1' 'IC.SIO2' '3' 'SUP.GND' '4' \ 18 | 'SUP.V+' '8' 'IC.SCK' '6' 'IC.SI/SIO0' '5'; 19 | Grid inch; 20 | -------------------------------------------------------------------------------- /script/IC_MEM_24AA_.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_24AA*.dev'; 10 | Prefix 'IC'; 11 | Description 'I2C EEPROM'; 12 | Value On; 13 | Add 24AA 'IC' Next 0 (0 0); 14 | Package 'SOT-23-5' '-SOT23-5'; 15 | Technology ''; 16 | Technology ''; 17 | Attribute 24AA '24AA' variable; 18 | Connect 'IC.SCL' '1' 'IC.GND' '2' 'IC.SDA' '3' 'IC.VCC' '4' 'IC.WP' '5'; 19 | Package 'DIP8' '-DIP8'; 20 | Technology ''; 21 | Connect 'IC.A0' '1' 'IC.A1' '2' 'IC.A2' '3' 'IC.GND' '4' 'IC.SDA' '5' \ 22 | 'IC.SCL' '6' 'IC.WP' '7' 'IC.VCC' '8'; 23 | -------------------------------------------------------------------------------- /script/IC_MEM_25XX__.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_25XX**.dev'; 10 | Prefix 'IC'; 11 | Description 'SPI EEPROM'; 12 | Value Off; 13 | Add SUPPLY 'SUP' Request 0 (-22.86 -2.54); 14 | Add 25AA 'IC' Next 0 (0 0); 15 | Package 'DIP8' '-DIP8'; 16 | Technology ''; 17 | Connect 'IC.!CS' '1' 'IC.SO' '2' 'IC.!WP' '3' 'SUP.GND' '4' 'IC.SI' '5' \ 18 | 'IC.SCK' '6' 'IC.!HOLD' '7' 'SUP.V+' '8'; 19 | -------------------------------------------------------------------------------- /script/IC_MEM_93C46.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MEM_93C46.dev'; 10 | Prefix 'IC'; 11 | Description 'Serial EEPROM 1K'; 12 | Value On; 13 | Add 3WIRE 'G$1' Next 0 (0 0); 14 | Package 'SOIC-8' ''''''; 15 | Technology ''; 16 | Technology ''; 17 | Attribute 93C46 '93C46' variable; 18 | Connect 'G$1.SK' '2' 'G$1.DC' '7' 'G$1.CS' '1' 'G$1.DI' '3' 'G$1.DO' '4' \ 19 | 'G$1.VCC' '8' 'G$1.ORG' '6' 'G$1.GND' '5'; 20 | -------------------------------------------------------------------------------- /script/IC_MMA7455L.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_MMA7455L.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add MMA7455L 'G$1' Next 0 (0 0); 14 | Package 'LGA-14' ''''''; 15 | Technology ''; 16 | Connect 'G$1.DVDD_IO' '1' 'G$1.GND1' '2' 'G$1.NC1' '3' 'G$1.IADDR0' '4' 'G$1.GND2' '5' \ 17 | 'G$1.AVDD' '6' 'G$1.!CS' '7' 'G$1.INT1/DRDY' '8' 'G$1.INT2' '9' 'G$1.NC2' '10' 'G$1.NC3' '11' \ 18 | 'G$1.SDO' '12' 'G$1.SDA/SDI/SDO' '13' 'G$1.SCL/SPC' '14'; 19 | -------------------------------------------------------------------------------- /script/IC_OP-AMP_LM358.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_OP-AMP_LM358.dev'; 10 | Prefix 'IC'; 11 | Description 'Dual op-amp'; 12 | Value Off; 13 | Add OPAMP_V+- 'A' Next 1 (-40.64 0); 14 | Add OPAMP 'B' Request 1 (-10.16 0); 15 | Package 'SO-8' '-SO8'; 16 | Technology ''; 17 | Connect 'A.OUT' '1' 'A.-' '2' 'A.+' '3' 'A.V-' '4' 'B.+' '5' \ 18 | 'B.-' '6' 'B.OUT' '7' 'A.V+' '8'; 19 | -------------------------------------------------------------------------------- /script/IC_OP-AMP_LMV321.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_OP-AMP_LMV321.dev'; 10 | Prefix 'IC'; 11 | Description 'Low voltage op-amp (2.7 - 5.0V)'; 12 | Value Off; 13 | Add OPAMP_V+GND 'OPAMP' Next 0 (0 0); 14 | Package 'SOT-23-5' '-SOT-23-5'; 15 | Technology ''; 16 | Connect 'OPAMP.+' '1' 'OPAMP.GND' '2' 'OPAMP.-' '3' 'OPAMP.OUT' '4' 'OPAMP.V+' '5'; 17 | -------------------------------------------------------------------------------- /script/IC_OPA2830.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_OPA2830.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add OPA2830 'G$1' Next 0 (-20.32 0); 14 | Package 'DGK_S_PDSO_G8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.OUT1' '1' 'G$1.INPUT1-' '2' 'G$1.INPUT1+' '3' 'G$1.VS-' '4' 'G$1.INPUT2+' '5' \ 17 | 'G$1.INPUT2-' '6' 'G$1.OUT2' '7' 'G$1.VS+' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_PCF8563.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_PCF8563.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add PCF8563 'G$1' Next 0 (0 0); 14 | Package 'SO-8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.OSCI' '1' 'G$1.OSCO' '2' 'G$1.!INT' '3' 'G$1.VSS' '4' 'G$1.SDA' '5' \ 17 | 'G$1.SCL' '6' 'G$1.CLKOUT' '7' 'G$1.VDD' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_QFX12.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_QFX12.dev'; 10 | Prefix 'IC'; 11 | Description 'Universal Quad Flat Pack/Leadless 12 pins'; 12 | Value Off; 13 | Add QFX-12 'IC' Next 0 (0 0); 14 | Add QFX-XPAD-3 'XPAD' Request 0 (-35.56 0); 15 | Package 'QFN12_3X3' '-QFN12_3X3'; 16 | Technology ''; 17 | Connect 'XPAD.XPAD@1' 'XPAD@1' 'IC.P1' 'P1' 'IC.P2' 'P2' 'IC.P3' 'P3' 'IC.P4' 'P4' \ 18 | 'IC.P5' 'P5' 'IC.P6' 'P6' 'IC.P7' 'P7' 'IC.P8' 'P8' 'IC.P9' 'P9' 'IC.P10' 'P10' \ 19 | 'IC.P11' 'P11' 'IC.P12' 'P12' 'XPAD.XPAD@2' 'XPAD@2' 'XPAD.XPAD@3' 'XPAD@3'; 20 | -------------------------------------------------------------------------------- /script/IC_RTC_DS1307.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_RTC_DS1307.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add DS1307 'G$1' Next 0 (0 -2.54); 14 | Package 'SO-8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.X1' '1' 'G$1.X2' '2' 'G$1.VBAT' '3' 'G$1.GND' '4' 'G$1.SDA' '5' \ 17 | 'G$1.SCL' '6' 'G$1.SQW/OUT' '7' 'G$1.VCC' '8'; 18 | -------------------------------------------------------------------------------- /script/IC_SI4707.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_SI4707.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add SI4707 'G$1' Next 0 (0 0); 14 | Package 'QFN-20' ''''''; 15 | Technology ''; 16 | Connect 'G$1.PAD' '0' 'G$1.NC1' '1' 'G$1.!SEN' '6' 'G$1.VDD' '11' 'G$1.NP3' '16' \ 17 | 'G$1.FMI' '2' 'G$1.RFGND' '3' 'G$1.NP1' '4' 'G$1.!RST' '5' 'G$1.SCLK' '7' 'G$1.SDIO' '8' \ 18 | 'G$1.RCLK' '9' 'G$1.VIO' '10' 'G$1.GND' '12' 'G$1.ROUT' '13' 'G$1.LOUT' '14' 'G$1.NP2' '15' \ 19 | 'G$1.GPO3' '17' 'G$1.GPO2/!INT' '18' 'G$1.GPO1' '19' 'G$1.NC2' '20'; 20 | -------------------------------------------------------------------------------- /script/IC_TC74.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_TC74.dev'; 10 | Prefix 'IC'; 11 | Description 'Serial digital thermal sensor'; 12 | Value Off; 13 | Add TC74 'IC' Next 0 (0 0); 14 | Package 'SOT-23-5' '-SOT23-5'; 15 | Technology ''; 16 | Connect 'IC.GND' '2' 'IC.VDD' '3' 'IC.SCL' '4' 'IC.SDA' '5'; 17 | Package 'TO-220V-5' '-TO220-5'; 18 | Technology ''; 19 | Connect 'IC.SDA' '2' 'IC.GND' '3' 'IC.SCL' '4' 'IC.VDD' '5'; 20 | -------------------------------------------------------------------------------- /script/IC_TMP006.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_TMP006.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add TMP006 'G$1' Next 0 (0 0); 14 | Package 'DSBGA-8' ''''''; 15 | Technology ''; 16 | Connect 'G$1.DGND' 'A1' 'G$1.AGND' 'A2' 'G$1.V+' 'A3' 'G$1.ADR1' 'B1' 'G$1.SCL' 'B3' \ 17 | 'G$1.ADR0' 'C1' 'G$1.!DRDY' 'C2' 'G$1.SDA' 'C3'; 18 | -------------------------------------------------------------------------------- /script/IC_TPIC6B595.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_TPIC6B595.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add TPIC6B595 'G$1' Next 0 (-12.7 12.7); 14 | Package 'SOIC-20' 'DW'; 15 | Technology ''; 16 | Connect 'G$1.VCC' '2' 'G$1.SERIN' '3' 'G$1.DRAIN0' '4' 'G$1.DRAIN1' '5' 'G$1.DRAIN2' '6' \ 17 | 'G$1.DRAIN3' '7' 'G$1.!SCLR' '8' 'G$1.!G' '9' 'G$1.GND' '10' 'G$1.GND1' '11' 'G$1.RCK' '12' \ 18 | 'G$1.SRCK' '13' 'G$1.DRAIN4' '14' 'G$1.DRAIN5' '15' 'G$1.DRAIN6' '16' 'G$1.DRAIN7' '17' 'G$1.SEROUT' '18' \ 19 | 'G$1.GND2' '19'; 20 | -------------------------------------------------------------------------------- /script/IC_TPS2041B.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_TPS2041B.dev'; 10 | Prefix 'IC'; 11 | Description 'High side power distribution switch'; 12 | Value Off; 13 | Add TPS2041B 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' ''''''; 15 | Technology ''; 16 | Connect 'G$1.OUT' '1' 'G$1.GND' '2' 'G$1.!OC' '3' 'G$1.!EN' '4' 'G$1.IN' '5'; 17 | -------------------------------------------------------------------------------- /script/IC_TPS6120X.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_TPS6120X.dev'; 10 | Prefix 'IC'; 11 | Description 'Low input voltage Synchronous Boost converter'; 12 | Value Off; 13 | Add TPS6120X 'IC' Next 0 (0 0); 14 | Add QFN-10-GND 'GND' Request 0 (-30.48 0); 15 | Package 'QFN-10' '-QFN10'; 16 | Technology ''; 17 | Connect 'IC.VAUX' '1' 'IC.VOUT' '2' 'IC.L' '3' 'IC.PGND' '4' 'IC.VIN' '5' \ 18 | 'IC.FB' '10' 'IC.GND' '9' 'IC.PS' '8' 'IC.UVLO' '7' 'IC.EN' '6' 'GND.GND@0' 'P0' \ 19 | 'GND.GND@4' 'P4' 'GND.GND@1' 'P1' 'GND.GND@2' 'P2' 'GND.GND@3' 'P3' 'GND.GND@5' 'V0' 'GND.GND@6' 'V1'; 20 | -------------------------------------------------------------------------------- /script/IC_UC_PIC10F22_.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_UC_PIC10F22*.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add PIC10F22X 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-6' ''''''; 15 | Technology ''; 16 | Connect 'G$1.GP0' '1' 'G$1.VSS' '2' 'G$1.GP1' '3' 'G$1.GP2' '4' 'G$1.VDD' '5' \ 17 | 'G$1.GP3' '6'; 18 | -------------------------------------------------------------------------------- /script/IC_UC_PIC16F1829.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_UC_PIC16F1829.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add PIC16(L)F1829 'G$1' Next 0 (0 0); 14 | Package 'SSOP-20' '-SSOP-20'; 15 | Technology ''; 16 | Connect 'G$1.VDD' '1' 'G$1.RA5' '2' 'G$1.RA4' '3' 'G$1.RA3/!MCLR' '4' 'G$1.RC5' '5' \ 17 | 'G$1.RC4' '6' 'G$1.RC3' '7' 'G$1.RC6' '8' 'G$1.RC7' '9' 'G$1.RB7' '10' 'G$1.RB6' '11' \ 18 | 'G$1.RB5' '12' 'G$1.RB4' '13' 'G$1.RC2' '14' 'G$1.RC1' '15' 'G$1.RC0' '16' 'G$1.RA2' '17' \ 19 | 'G$1.RA1/PGC' '18' 'G$1.RA0/PGD' '19' 'G$1.VSS' '20'; 20 | -------------------------------------------------------------------------------- /script/IC_ULN2003.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_ULN2003.dev'; 10 | Prefix 'IC'; 11 | Description '7 Darlington Array Driver'; 12 | Value Off; 13 | Add ULN2003 'IC' Next 0 (0 0); 14 | Package 'TSSOP-16' '-TSSOP-16'; 15 | Technology ''; 16 | Connect 'IC.1B' '1' 'IC.2B' '2' 'IC.3B' '3' 'IC.4B' '4' 'IC.5B' '5' \ 17 | 'IC.6B' '6' 'IC.7B' '7' 'IC.GND' '8' 'IC.COM' '9' 'IC.7C' '10' 'IC.6C' '11' \ 18 | 'IC.5C' '12' 'IC.4C' '13' 'IC.3C' '14' 'IC.2C' '15' 'IC.1C' '16'; 19 | -------------------------------------------------------------------------------- /script/IC_USBLC6-2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_USBLC6-2.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add USBLC 'G$1' Next 0 (7.62 -7.62); 14 | Package 'SOT-23-6L' ''''''; 15 | Technology ''; 16 | Connect 'G$1.I/O1' '6' 'G$1.VBUS' '5' 'G$1.I/O2' '4' 'G$1.I/O_1' '1' 'G$1.GND' '2' \ 17 | 'G$1.I/O_2' '3'; 18 | -------------------------------------------------------------------------------- /script/IC_W25X10.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'IC_W25X10.dev'; 10 | Prefix 'IC'; 11 | Description ''; 12 | Value Off; 13 | Add W25X10 'G$1' Next 0 (0 0); 14 | Package 'SOIC-8W' ''''''; 15 | Technology ''; 16 | Connect 'G$1.DO' '2' 'G$1.HOLD' '7' 'G$1.CS' '1' 'G$1.WP' '3' 'G$1.GND' '4' \ 17 | 'G$1.VCC' '8' 'G$1.CLK' '6' 'G$1.DIO' '5'; 18 | -------------------------------------------------------------------------------- /script/INDUCTOR.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'INDUCTOR.dev'; 10 | Prefix 'L'; 11 | Description 'Inductor'; 12 | Value Off; 13 | Add COIL 'L' Next 0 (0 0); 14 | Package 'L1812' '-L1812'; 15 | Technology ''; 16 | Connect 'L.2' '2' 'L.1' '1'; 17 | -------------------------------------------------------------------------------- /script/INDUCTOR.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'INDUCTOR.sym'; 10 | Pin '1' Pas None Short R270 Off 1 (0 7.62); 11 | Pin '2' Pas None Short R90 Off 1 (0 -7.62); 12 | Layer 95; 13 | Change Size 1.778; 14 | Change Ratio 8; 15 | Text '>NAME' R0 (2.54 6.35); 16 | Layer 96; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>VALUE' R0 (2.54 -6.35); 20 | Layer 94; 21 | Rect R0 (-1.27 -5.08) (1.27 5.08); 22 | Layer 94; 23 | Wire 0.254 (-2.032 -5.08) (-2.032 5.08); 24 | -------------------------------------------------------------------------------- /script/JOYSTICK.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JOYSTICK.dev'; 10 | Prefix 'JOY'; 11 | Description ''; 12 | Value Off; 13 | Add JOYSTICK 'G$1' Next 0 (0 0); 14 | Package 'JOYSTICK' ''''''; 15 | Technology ''; 16 | Connect 'G$1.COM' '1' 'G$1.LEFT' '2' 'G$1.RIGHT' '5' 'G$1.UP' '6' 'G$1.ACT' '3' \ 17 | 'G$1.DOWN' '4'; 18 | -------------------------------------------------------------------------------- /script/JOYSTICK_SF303GJ26-3.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JOYSTICK_SF303GJ26-3.dev'; 10 | Prefix 'SW'; 11 | Description '\ 12 | Multi way switch\n\ 13 |
Mfr no: SF303GJ26-3\n\ 14 |
SF303GJ26-3'; 15 | Value Off; 16 | Add JOYSTICK_SF303GJ26-3 'SW' Next 0 (0 0); 17 | Package 'JOYSTICK_SF303GJ26-3' ''''''; 18 | Technology ''; 19 | Connect 'SW.B' '4' 'SW.COMMON' '5' 'SW.D' '6' 'SW.C' '3' 'SW.CENTER' '2' \ 20 | 'SW.A' '1'; 21 | Grid inch; 22 | -------------------------------------------------------------------------------- /script/JUMP2X2_DESC.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMP2X2_DESC.sym'; 10 | Layer 94; 11 | Change Size 1.27; 12 | Change Ratio 8; 13 | Text '(JUMP2x2 desc)' R0 (-7.62 5.08); 14 | Layer 94; 15 | Change Size 1.27; 16 | Change Ratio 8; 17 | Text '00 = >OPT1=' R0 (-7.62 2.54); 18 | Layer 94; 19 | Change Size 1.27; 20 | Change Ratio 8; 21 | Text '01 = >OPT2=' R0 (-7.62 0); 22 | Layer 94; 23 | Change Size 1.27; 24 | Change Ratio 8; 25 | Text '10 = >OPT3=' R0 (-7.62 -2.54); 26 | Layer 94; 27 | Change Size 1.27; 28 | Change Ratio 8; 29 | Text '11 = >OPT4=' R0 (-7.62 -5.08); 30 | -------------------------------------------------------------------------------- /script/JUMP2_DESC.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMP2_DESC.sym'; 10 | Layer 94; 11 | Change Size 1.27; 12 | Change Ratio 8; 13 | Text '(Jumper description)' R0 (-10.16 0); 14 | Layer 94; 15 | Change Size 1.27; 16 | Change Ratio 8; 17 | Text '>ON=' R0 (-10.16 -2.54); 18 | Layer 94; 19 | Change Size 1.27; 20 | Change Ratio 8; 21 | Text '>OFF=' R0 (-10.16 -5.08); 22 | -------------------------------------------------------------------------------- /script/JUMP3.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMP3.sym'; 10 | Pin '1' Pas Dot Short R0 Pad 0 (-2.54 2.54); 11 | Pin '2' Pas Dot Short R0 Pad 0 (-2.54 0); 12 | Pin '3' Pas Dot Short R0 Pad 0 (-2.54 -2.54); 13 | Layer 94; 14 | Wire 0.4064 (-5.08 5.08) (-5.08 -5.08) (2.54 -5.08) (2.54 5.08) \ 15 | (-5.08 5.08); 16 | Layer 94; 17 | Change Size 1.27; 18 | Change Ratio 8; 19 | Text '>J12=' R0 (3.4925 1.27); 20 | Layer 94; 21 | Change Size 1.27; 22 | Change Ratio 8; 23 | Text '>J23=' R0 (3.4925 -1.27); 24 | Layer 95; 25 | Change Size 1.778; 26 | Change Ratio 8; 27 | Text '>NAME' R0 (-5.08 5.715); 28 | -------------------------------------------------------------------------------- /script/JUMP3_DESC.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMP3_DESC.sym'; 10 | Layer 94; 11 | Change Size 1.27; 12 | Change Ratio 8; 13 | Text '(Jumper description)' R0 (-10.16 0); 14 | Layer 94; 15 | Change Size 1.27; 16 | Change Ratio 8; 17 | Text '>LEFT=' R0 (-10.16 -2.54); 18 | Layer 94; 19 | Change Size 1.27; 20 | Change Ratio 8; 21 | Text '>RIGHT=' R0 (-10.16 -5.08); 22 | -------------------------------------------------------------------------------- /script/JUMPER_1X3.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMPER_1X3.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add JUMP3 'G$1' Next 0 (0 0); 14 | Package 'JP3_0805' '0805'; 15 | Technology ''; 16 | Technology ''; 17 | Attribute J12 'optA' variable; 18 | Attribute J23 'optB' variable; 19 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3'; 20 | Package 'JUMPER_SOLDER' 'ALT'; 21 | Technology ''; 22 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3'; 23 | -------------------------------------------------------------------------------- /script/JUMPER_SOLDER_1X2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMPER_SOLDER_1X2.dev'; 10 | Prefix 'J'; 11 | Description ''; 12 | Value Off; 13 | Add JUMP_SOLDER_1X2 'J' Next 0 (0 0); 14 | Package 'JUMPER_SOLDER_1X2' ''''''; 15 | Technology ''; 16 | Connect 'J.1' '1' 'J.2' '2'; 17 | Grid mil; 18 | -------------------------------------------------------------------------------- /script/JUMPER_SOLDER_1X2.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'JUMPER_SOLDER_1X2.pac'; 10 | Description 'Solder jumper 6mil clearance'; 11 | Layer 1; 12 | Smd '1' 1.4224 1.143 -0 R90 NOCREAM (-0.6604 0); 13 | Layer 1; 14 | Smd '2' 1.4224 1.143 -0 R90 NOCREAM (0.6604 0); 15 | Layer 21; 16 | Wire 0.3048 (-1.476 1) (-1.476 -1) (-0.0191 -1) (1.476 -1) \ 17 | (1.476 1) (-0.0191 1) (-1.476 1); 18 | Layer 25; 19 | Change Size 1.27; 20 | Change Ratio 10; 21 | Text '>NAME' SR0 (-1.425 1.425); 22 | Layer 21; 23 | Wire 0.3048 (-0.0191 -1) (-0.0191 -0.75); 24 | Wire 0.3048 (-0.0191 1) (-0.0191 0.75); 25 | -------------------------------------------------------------------------------- /script/LABEL_JUMPER_1X2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LABEL_JUMPER_1X2.dev'; 10 | Prefix ''; 11 | Description '\ 12 | Nice formatted two legged jumperdescription
\n\ 13 |
\n\ 14 | Use attributes to change the values
\n\ 15 | ON = With jumper
\n\ 16 | OFF = Without jumper
'; 17 | Value Off; 18 | Add JUMP2_DESC 'G$1' Next 0 (0 0); 19 | Package 'JUMP2_DESC' ''''''; 20 | Technology ''; 21 | Technology ''; 22 | Attribute OFF 'off' variable; 23 | Attribute ON 'on' variable; 24 | -------------------------------------------------------------------------------- /script/LABEL_JUMPER_1X3.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LABEL_JUMPER_1X3.dev'; 10 | Prefix ''; 11 | Description '\ 12 | Nice formatted three legged jumperdescription
\n\ 13 |
\n\ 14 | Use attributes to change the values
\n\ 15 | LEFT = With jumper to the left
\n\ 16 | RIGHT = With jumper to the right
'; 17 | Value Off; 18 | Add JUMP3_DESC 'G$1' Next 0 (0 0); 19 | Package 'JUMP3_DESC' ''''''; 20 | Technology ''; 21 | Technology ''; 22 | Attribute LEFT 'left' variable; 23 | Attribute RIGHT 'right' variable; 24 | -------------------------------------------------------------------------------- /script/LABEL_JUMPER_2X2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LABEL_JUMPER_2X2.dev'; 10 | Prefix ''; 11 | Description ''; 12 | Value Off; 13 | Add JUMP2X2_DESC 'G$1' Next 0 (0 0); 14 | Package 'JUMP2X2_DESC' ''''''; 15 | Technology ''; 16 | Technology ''; 17 | Attribute OPT1 'option1' variable; 18 | Attribute OPT2 'option2' variable; 19 | Attribute OPT3 'option3' variable; 20 | Attribute OPT4 'option4' variable; 21 | -------------------------------------------------------------------------------- /script/LD-1117.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LD-1117.sym'; 10 | Pin 'GND' I/O None Short R90 Pad 0 (0 -7.62); 11 | Pin 'VIN' I/O None Short R0 Pin 0 (-10.16 0); 12 | Pin 'VOUT' I/O None Short R180 Pin 0 (10.16 0); 13 | Layer 94; 14 | Wire 0.4064 (-7.62 2.54) (7.62 2.54) (7.62 -5.08) (-7.62 -5.08) \ 15 | (-7.62 2.54); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (-7.62 5.842); 20 | Layer 96; 21 | Change Size 1.778; 22 | Change Ratio 8; 23 | Text '>VALUE' R0 (-7.62 3.556); 24 | Layer 95; 25 | Change Size 1.6764; 26 | Change Ratio 8; 27 | Text 'GND' R0 (-2.286 -4.318); 28 | -------------------------------------------------------------------------------- /script/LED_RGB.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LED_RGB.dev'; 10 | Prefix 'LED'; 11 | Description ''; 12 | Value Off; 13 | Add RGB 'G$1' Next 0 (0 0); 14 | Package 'PLCC4' ''''''; 15 | Technology ''; 16 | Connect 'G$1.A' '2' 'G$1.B' '3' 'G$1.G' '4' 'G$1.R' '1' 'G$1.A1' 'A1' \ 17 | 'G$1.A2' 'A2'; 18 | -------------------------------------------------------------------------------- /script/LED_RGB2.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LED_RGB2.dev'; 10 | Prefix 'LED'; 11 | Description ''; 12 | Value Off; 13 | Add RGBLED 'G$1' Next 0 (0 0); 14 | Package 'RGBLED1206' '1206'; 15 | Technology ''; 16 | Connect 'G$1.A' 'A' 'G$1.R' 'R' 'G$1.G' 'G' 'G$1.B' 'B'; 17 | -------------------------------------------------------------------------------- /script/LED_RGB3.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LED_RGB3.dev'; 10 | Prefix 'LED'; 11 | Description ''; 12 | Value Off; 13 | Add RGB3 'G$1' Next 0 (0 0); 14 | Package 'RGBLED' ''''''; 15 | Technology ''; 16 | Connect 'G$1.CB' 'CB' 'G$1.CR' 'CR' 'G$1.CG' 'CG' 'G$1.AB' 'AB' 'G$1.AR' 'AR' \ 17 | 'G$1.AG' 'AG'; 18 | -------------------------------------------------------------------------------- /script/LED_RGB_5050.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LED_RGB_5050.dev'; 10 | Prefix ''; 11 | Description ''; 12 | Value Off; 13 | Add LED_RGB_5050 'G$1' Next 0 (0 0); 14 | Package 'LED_5050' ''''''; 15 | Technology ''; 16 | Connect 'G$1.GA' '1' 'G$1.RA' '2' 'G$1.BA' '3' 'G$1.BC' '4' 'G$1.RC' '5' \ 17 | 'G$1.GC' '6'; 18 | Grid inch; 19 | -------------------------------------------------------------------------------- /script/LOGIC_AND.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LOGIC_AND.sym'; 10 | Pin 'I0' In None Middle R0 Pad 1 (-7.62 2.54); 11 | Pin 'I1' In None Middle R0 Pad 1 (-7.62 -2.54); 12 | Pin 'O' Out None Middle R180 Pad 0 (7.62 0); 13 | Layer 95; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Change Font Proportional; 17 | Text '>NAME' R0 (2.54 3.175); 18 | Layer 96; 19 | Change Size 1.778; 20 | Change Ratio 8; 21 | Text '>VALUE' R0 (2.54 -5.08); 22 | Layer 94; 23 | Wire 0.4064 (-2.54 5.08) (-2.54 -5.08); 24 | Wire 0.4064 (-2.54 5.08) -180 (-2.54 -5.08); 25 | -------------------------------------------------------------------------------- /script/LOGO_CC-0.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LOGO_CC-0.dev'; 10 | Prefix 'LOGO'; 11 | Description ''; 12 | Value Off; 13 | Add LOGO_CC-0 'LOGO' Next 0 (0 0); 14 | Package 'LOGO_CC-0' ''''''; 15 | Technology ''; 16 | Grid inch; 17 | -------------------------------------------------------------------------------- /script/LOGO_CC-0.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LOGO_CC-0.sym'; 10 | Layer 94; 11 | Change Size 2.54; 12 | Change Ratio 8; 13 | Text 'CC-0' R0 (-4.445 -1.016); 14 | Layer 94; 15 | Wire 0.254 (-10.16 3.81) +90 (-11.43 2.54) (-11.43 -2.54) +90 (-10.16 -3.81) \ 16 | (10.16 -3.81) +90 (11.43 -2.54) (11.43 2.54) +90 (10.16 3.81) \ 17 | (-10.16 3.81); 18 | Layer 94; 19 | Circle 0.1524 (-10.16 2.54) (-9.711 2.54); 20 | Layer 94; 21 | Circle 0.1524 (-10.16 -2.54) (-9.711 -2.54); 22 | Layer 94; 23 | Circle 0.1524 (10.16 -2.54) (10.609 -2.54); 24 | Layer 94; 25 | Circle 0.1524 (10.16 2.54) (10.609 2.54); 26 | -------------------------------------------------------------------------------- /script/LOGO_CC-BY-SA.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'LOGO_CC-BY-SA.dev'; 10 | Prefix 'LOGO'; 11 | Description ''; 12 | Value Off; 13 | Add LOGO_CC_BY_SA 'LOGO' Next 0 (0 0); 14 | Package 'CC-BY-SA' ''''''; 15 | Technology ''; 16 | -------------------------------------------------------------------------------- /script/M1X1.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X1.pac'; 10 | Description ''; 11 | Change Drill 0.8;Pad '1' Square 0 R0 FIRST (0 0); 12 | Layer 21; 13 | Wire 0.1524 (-1.27 1.27) (1.27 1.27) (1.27 -1.27) (-1.27 -1.27) \ 14 | (-1.27 1.27); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-1.27 1.5875); 19 | -------------------------------------------------------------------------------- /script/M1X2.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X2.pac'; 10 | Description ''; 11 | Change Drill 0.8;Pad '1' Square 0 R0 FIRST (-1.27 0); 12 | Change Drill 0.8;Pad '2' Round 0 R0 (1.27 0); 13 | Layer 21; 14 | Wire 0.1524 (-2.54 -1.27) (-2.54 1.27) (0 1.27) (2.54 1.27) \ 15 | (2.54 -1.27) (0 -1.27) (-2.54 -1.27); 16 | Wire 0.1524 (0 -1.27) (0 1.27); 17 | Layer 25; 18 | Change Size 1.27; 19 | Change Ratio 10; 20 | Text '>NAME' R0 (-2.54 1.5875); 21 | -------------------------------------------------------------------------------- /script/M1X2_08_17.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X2_08_17.pac'; 10 | Description '\ 11 | square pad
\n\ 12 | drill: 0.8 mm
\n\ 13 | pad diameter: 1.7 mm'; 14 | Change Drill 0.8;Pad '1' Square 1.7 R0 FIRST (0 0); 15 | Layer 21; 16 | Wire 0.1524 (-1.27 1.27) (1.27 1.27) (1.27 -1.27) (-1.27 -1.27) \ 17 | (-1.27 1.27); 18 | Layer 25; 19 | Change Size 1.27; 20 | Change Ratio 10; 21 | Text '>NAME' R0 (-1.27 1.5875); 22 | -------------------------------------------------------------------------------- /script/M1X2_10_17.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X2_10_17.pac'; 10 | Description '\ 11 | square pad
\n\ 12 | drill: 1 mm
\n\ 13 | pad diameter: 1.7 mm'; 14 | Change Drill 1;Pad '1' Square 1.7 R0 FIRST (0 0); 15 | Layer 21; 16 | Wire 0.1524 (-1.27 1.27) (1.27 1.27) (1.27 -1.27) (-1.27 -1.27) \ 17 | (-1.27 1.27); 18 | Layer 25; 19 | Change Size 1.27; 20 | Change Ratio 10; 21 | Text '>NAME' R0 (-1.27 1.5875); 22 | -------------------------------------------------------------------------------- /script/M1X3.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X3.pac'; 10 | Description ''; 11 | Change Drill 0.8;Pad '1' Square 0 R0 FIRST (0 0); 12 | Change Drill 0.8;Pad '2' Round 0 R0 (2.54 0); 13 | Change Drill 0.8;Pad '3' Round 0 R0 (5.08 0); 14 | Layer 21; 15 | Wire 0.1524 (-1.27 -1.27) (-1.27 1.27) (1.27 1.27) (6.35 1.27) 0.127 \ 16 | (6.35 -1.27) 0.1524 (1.27 -1.27) (-1.27 -1.27); 17 | Wire 0.1524 (1.27 -1.27) (1.27 1.27); 18 | Layer 25; 19 | Change Size 1.27; 20 | Change Ratio 10; 21 | Text '>NAME' R0 (-1.27 1.5875); 22 | -------------------------------------------------------------------------------- /script/M1X4.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'M1X4.pac'; 10 | Description ''; 11 | Change Drill 1.02;Pad '1' Square 1.632 R0 FIRST (0 0); 12 | Change Drill 1.02;Pad '2' Round 1.632 R0 (2.54 0); 13 | Change Drill 1.02;Pad '3' Round 1.632 R0 (5.08 0); 14 | Layer 21; 15 | Wire 0.1524 (-1.27 -1.27) (-1.27 1.27) (1.27 1.27) (8.89 1.27) \ 16 | (8.89 -1.27) (1.27 -1.27) (-1.27 -1.27); 17 | Wire 0.1524 (1.27 -1.27) (1.27 1.27); 18 | Layer 25; 19 | Change Size 1.27; 20 | Change Ratio 10; 21 | Text '>NAME' R0 (-1.27 1.5875); 22 | Change Drill 1.02;Pad '4' Round 1.632 R0 (7.62 0); 23 | -------------------------------------------------------------------------------- /script/OSC-OSCILLATOR.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'OSC-OSCILLATOR.dev'; 10 | Prefix 'XTAL'; 11 | Description 'Oscillator'; 12 | Value Off; 13 | Add OSCILLATOR 'G$1' Next 0 (0 0); 14 | Package 'OSCILLATOR_7X5_SMD' ''''''; 15 | Technology ''; 16 | Connect 'G$1.EN' '1' 'G$1.VCC' '4' 'G$1.OUT' '3' 'G$1.GND' '2'; 17 | -------------------------------------------------------------------------------- /script/OSCILLATOR.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'OSCILLATOR.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-7.62 -5.08) (-7.62 5.08); 12 | Wire 0.4064 (-7.62 -5.08) (7.62 -5.08) (7.62 5.08) (-7.62 5.08); 13 | Pin 'VCC' Pwr None Middle R0 Both 0 (-12.7 2.54); 14 | Pin 'GND' Pwr None Middle R180 Both 0 (12.7 -2.54); 15 | Pin 'EN' In None Middle R0 Both 0 (-12.7 -2.54); 16 | Pin 'OUT' Out None Middle R180 Both 0 (12.7 2.54); 17 | Layer 96; 18 | Change Size 1.778; 19 | Change Ratio 8; 20 | Text '>VALUE' R0 (-7.62 -7.62); 21 | Layer 96; 22 | Change Size 1.778; 23 | Change Ratio 8; 24 | Text '>NAME' R0 (-7.62 5.715); 25 | -------------------------------------------------------------------------------- /script/PAD_ROUND_4.1MM.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'PAD_ROUND_4.1MM.pac'; 10 | Description 'Round pad 4.1mm hole 8mm pad diameter'; 11 | Change Drill 4.1;Pad 'P' Round 8 R0 NOTHERMAL (0 0); 12 | Layer 25; 13 | Change Size 1.27; 14 | Change Ratio 10; 15 | Change Font Proportional; 16 | Text '>NAME' R0 (-3.81 5.08); 17 | Layer 26; 18 | Change Size 1.27; 19 | Change Ratio 10; 20 | Text '>NAME' MR0 (3.81 -6.35); 21 | -------------------------------------------------------------------------------- /script/PROTO_VIAS_01X01.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'PROTO_VIAS_01X01.dev'; 10 | Prefix 'P'; 11 | Description 'Single Pad for Protoboard Filling'; 12 | Value Off; 13 | Add HEADER1X1 'P' Next 0 (0 0); 14 | Package 'PROTO_VIAS_01X01' ''''''; 15 | Technology ''; 16 | Connect 'P.1' '1'; 17 | Grid inch; 18 | -------------------------------------------------------------------------------- /script/PROTO_VIAS_01X01.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'PROTO_VIAS_01X01.pac'; 10 | Description 'square pad 0.04 inch/1.016 mm drill prototyping block'; 11 | Change Drill 1.016;Pad '1' Square 0 R0 (0 0); 12 | -------------------------------------------------------------------------------- /script/PROTO_VIAS_01X01_1.2.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'PROTO_VIAS_01X01_1.2.pac'; 10 | Description 'square pad1.2 mm drill prototyping block'; 11 | Change Drill 1.2;Pad '1' Square 0 R0 (0 0); 12 | -------------------------------------------------------------------------------- /script/PROTO_VIAS_05X05.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'PROTO_VIAS_05X05.dev'; 10 | Prefix ''; 11 | Description '5x5 square pad 0.04 inch prototyping block'; 12 | Value Off; 13 | Package 'PROTO_VIAS_05X05' ''''''; 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/QFX-XPAD-3.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'QFX-XPAD-3.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-7.62 5.08) (7.62 5.08) (7.62 -5.08) (-7.62 -5.08) \ 12 | (-7.62 5.08); 13 | Pin 'XPAD@1' Pas None Short R0 Both 0 (-10.16 2.54); 14 | Pin 'XPAD@2' Pas None Short R0 Both 0 (-10.16 0); 15 | Pin 'XPAD@3' Pas None Short R0 Both 0 (-10.16 -2.54); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (-7.62 -7.62); 20 | -------------------------------------------------------------------------------- /script/QFX-XPAD-4.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'QFX-XPAD-4.sym'; 10 | Layer 94; 11 | Wire 0.4064 (0 12.7) (15.24 12.7) (15.24 0) (0 0) \ 12 | (0 12.7); 13 | Pin 'XPAD@1' Pas None Short R0 Both 0 (-2.54 10.16); 14 | Pin 'XPAD@2' Pas None Short R0 Both 0 (-2.54 7.62); 15 | Pin 'XPAD@3' Pas None Short R0 Both 0 (-2.54 5.08); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (0 -2.54); 20 | Pin 'XPAD@4' Pas None Short R0 Both 0 (-2.54 2.54); 21 | -------------------------------------------------------------------------------- /script/QFX-XPAD-6.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'QFX-XPAD-6.sym'; 10 | Layer 94; 11 | Wire 0.4064 (0 17.78) (15.24 17.78) (15.24 0) (0 0) \ 12 | (0 17.78); 13 | Pin 'XPAD@1' Pas None Short R0 Both 0 (-2.54 15.24); 14 | Pin 'XPAD@2' Pas None Short R0 Both 0 (-2.54 12.7); 15 | Pin 'XPAD@3' Pas None Short R0 Both 0 (-2.54 10.16); 16 | Layer 95; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>NAME' R0 (0 -2.54); 20 | Pin 'XPAD@4' Pas None Short R0 Both 0 (-2.54 7.62); 21 | Pin 'XPAD@5' Pas None Short R0 Both 0 (-2.54 5.08); 22 | Pin 'XPAD@6' Pas None Short R0 Both 0 (-2.54 2.54); 23 | -------------------------------------------------------------------------------- /script/R603.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'R603.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1 1.1 -0 R0 (-0.85 0); 13 | Layer 1; 14 | Smd '2' 1 1.1 -0 R0 (0.85 0); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-0.762 1.016); 19 | Layer 27; 20 | Change Size 1.27; 21 | Change Ratio 10; 22 | Text '>VALUE' R0 (-0.762 -2.286); 23 | Layer 51; 24 | Rect R0 (0.4318 -0.4318) (0.8382 0.4318); 25 | Layer 51; 26 | Rect R0 (-0.8382 -0.4318) (-0.4318 0.4318); 27 | Layer 51; 28 | Wire 0.1524 (0.432 0.356) (-0.432 0.356); 29 | Wire 0.1524 (-0.432 -0.356) (0.432 -0.356); 30 | -------------------------------------------------------------------------------- /script/R805.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'R805.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.3 1.5 -0 R0 (-0.95 0); 13 | Layer 1; 14 | Smd '2' 1.3 1.5 -0 R0 (0.95 0); 15 | Layer 25; 16 | Change Size 1.27; 17 | Change Ratio 10; 18 | Text '>NAME' R0 (-0.762 1.016); 19 | Layer 27; 20 | Change Size 1.27; 21 | Change Ratio 10; 22 | Text '>VALUE' R0 (-0.762 -2.286); 23 | Layer 51; 24 | Rect R0 (0.4064 -0.6985) (1.0564 0.7015); 25 | Layer 51; 26 | Rect R0 (-1.0668 -0.6985) (-0.4168 0.7015); 27 | Layer 51; 28 | Wire 0.1524 (-0.41 0.635) (0.41 0.635); 29 | Wire 0.1524 (-0.41 -0.635) (0.41 -0.635); 30 | -------------------------------------------------------------------------------- /script/RESISTOR.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'RESISTOR.sym'; 10 | Layer 94; 11 | Wire 0.254 (-2.54 -0.889) (2.54 -0.889); 12 | Wire 0.254 (2.54 0.889) (-2.54 0.889); 13 | Pin '2' Pas None Short R180 Off 1 (5.08 0); 14 | Layer 95; 15 | Change Size 1.778; 16 | Change Ratio 8; 17 | Text '>NAME' R0 (-3.81 1.4986); 18 | Layer 96; 19 | Change Size 1.778; 20 | Change Ratio 8; 21 | Text '>VALUE' R0 (-3.81 -3.302); 22 | Layer 94; 23 | Wire 0.254 (2.54 -0.889) (2.54 0.889); 24 | Wire 0.254 (-2.54 -0.889) (-2.54 0.889); 25 | Pin '1' Pas None Short R0 Off 1 (-5.08 0); 26 | -------------------------------------------------------------------------------- /script/RESISTOR_ARRAY_4.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'RESISTOR_ARRAY_4.dev'; 10 | Prefix 'RN'; 11 | Description '4 Resistor Array 0603'; 12 | Value On; 13 | Add RESISTOR 'B' Always 1 (0 5.08); 14 | Add RESISTOR 'C' Always 1 (0 -2.54); 15 | Add RESISTOR 'D' Always 1 (0 -10.16); 16 | Add RESISTOR 'A' Always 1 (0 12.7); 17 | Package 'RN8P-4R-CRA06S' ''''''; 18 | Technology ''; 19 | Connect 'C.1' '3' 'B.1' '2' 'B.2' '7' 'C.2' '6' 'A.1' '1' \ 20 | 'A.2' '8' 'D.2' '5' 'D.1' '4'; 21 | -------------------------------------------------------------------------------- /script/RGBLED.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'RGBLED.sym'; 10 | Pin 'A' I/O None Middle R180 Both 0 (12.7 0); 11 | Pin 'R' I/O None Middle R0 Both 0 (-10.16 2.54); 12 | Pin 'G' I/O None Middle R0 Both 0 (-10.16 0); 13 | Pin 'B' I/O None Middle R0 Both 0 (-10.16 -2.54); 14 | Layer 94; 15 | Wire 0.4064 (-5.08 -5.08) (-5.08 5.08) (7.62 5.08) (7.62 -5.08) \ 16 | (-5.08 -5.08); 17 | Layer 95; 18 | Change Size 1.778; 19 | Change Ratio 8; 20 | Text '>NAME' R0 (-5.08 5.715); 21 | Layer 96; 22 | Change Size 1.778; 23 | Change Ratio 8; 24 | Text '>VALUE' R0 (-5.08 -7.62); 25 | -------------------------------------------------------------------------------- /script/SLIDE_SWITCH_SMD.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SLIDE_SWITCH_SMD.sym'; 10 | Pin 'COM' Pas None Short R0 Both 0 (-7.62 0); 11 | Pin 'NC' Pas Dot Short R180 Both 0 (2.54 2.54); 12 | Pin 'NO' Pas Dot Short R180 Both 0 (2.54 -2.54); 13 | Layer 94; 14 | Wire 0.1524 (-5.08 0) (0 2.54); 15 | Layer 95; 16 | Change Size 1.778; 17 | Change Ratio 8; 18 | Text '>NAME' R0 (-7.62 5.08); 19 | -------------------------------------------------------------------------------- /script/SMDPAD05X05.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SMDPAD05X05.pac'; 10 | Description ''; 11 | Layer 1; 12 | Smd '1' 1.27 1.27 -0 R90 (0 0); 13 | Layer 25; 14 | Change Size 1.27; 15 | Change Ratio 10; 16 | Change Font Proportional; 17 | Text '>NAME' R0 (-2.54 1.27); 18 | -------------------------------------------------------------------------------- /script/SUPPLY.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY.sym'; 10 | Pin 'V+' Sup None Middle R270 Both 0 (0 12.7); 11 | Pin 'GND' Sup None Middle R90 Both 0 (0 -12.7); 12 | -------------------------------------------------------------------------------- /script/SUPPLY_+12V.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+12V.dev'; 10 | Prefix '+12V'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_+12V 'SUPPLY' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_+12V.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+12V.sym'; 10 | Pin '+12V' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Change Font Proportional; 17 | Text '>VALUE' R0 (0 2.54); 18 | -------------------------------------------------------------------------------- /script/SUPPLY_+3V3.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+3V3.dev'; 10 | Prefix '+3V3'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_+3V3 'G$1' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_+3V3.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+3V3.sym'; 10 | Pin '+3V3' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Text '>VALUE' R0 (0 2.54); 17 | -------------------------------------------------------------------------------- /script/SUPPLY_+5V.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+5V.dev'; 10 | Prefix '+5V'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_+5V 'SUPPLY' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_+5V.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_+5V.sym'; 10 | Pin '+5V' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Change Font Proportional; 17 | Text '>VALUE' R0 (0 2.54); 18 | -------------------------------------------------------------------------------- /script/SUPPLY_-12V.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_-12V.dev'; 10 | Prefix '-12V'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_-12V 'SUPPLY' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_-12V.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_-12V.sym'; 10 | Pin '-12V' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Text '>VALUE' R0 (0 2.54); 17 | -------------------------------------------------------------------------------- /script/SUPPLY_-5V.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_-5V.dev'; 10 | Prefix '-5V'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_-5V 'SUPPLY' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_-5V.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_-5V.sym'; 10 | Pin '-5V' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Text '>VALUE' R0 (0 2.54); 17 | -------------------------------------------------------------------------------- /script/SUPPLY_GND.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_GND.dev'; 10 | Prefix 'GND'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_GND 'G$1' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_GND.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_GND.sym'; 10 | Pin 'GND' Sup None Short R270 Off 0 (0 2.54); 11 | Layer 94; 12 | Wire 0.254 (1.27 0) (-1.27 0); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Text '>VALUE' R0 (-1.524 -2.032); 17 | -------------------------------------------------------------------------------- /script/SUPPLY_VUSB.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_VUSB.dev'; 10 | Prefix 'VUSB'; 11 | Description ''; 12 | Value Off; 13 | Add SUPPLY_VUSB 'G$1' Next 0 (0 0); 14 | Technology ''; 15 | -------------------------------------------------------------------------------- /script/SUPPLY_VUSB.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SUPPLY_VUSB.sym'; 10 | Pin 'VUSB' Sup None Short R90 Off 0 (0 0); 11 | Layer 94; 12 | Wire 0.254 (1.27 0.635) (0 2.54) (-1.27 0.635); 13 | Layer 96; 14 | Change Size 1.778; 15 | Change Ratio 8; 16 | Text '>VALUE' R0 (0 2.54); 17 | -------------------------------------------------------------------------------- /script/SWITCH_4.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SWITCH_4.sym'; 10 | Pin '1' Pas None Short R0 Pad 2 (-5.08 -2.54); 11 | Pin '2' Pas None Short R180 Pad 1 (5.08 -2.54); 12 | Layer 94; 13 | Change Style ShortDash; 14 | Wire 0.254 (1.905 -2.54) (2.54 -2.54); 15 | Layer 95; 16 | Change Size 1.778; 17 | Change Ratio 8; 18 | Text '>NAME' R0 (-2.54 0); 19 | Layer 94; 20 | Circle 0.4064 (-2.54 -2.54) (-2.413 -2.54); 21 | Layer 94; 22 | Circle 0.4064 (2.54 -2.54) (2.667 -2.54); 23 | Layer 94; 24 | Wire 0.254 (-2.54 -2.54) (1.905 -1.27); 25 | -------------------------------------------------------------------------------- /script/SW_DIP_4P.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_DIP_4P.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SWITCH_4 'SA' Next 0 (0 2.54); 14 | Add SWITCH_4 'SB' Next 0 (0 -2.54); 15 | Add SWITCH_4 'SC' Next 0 (0 -7.62); 16 | Add SWITCH_4 'SD' Next 0 (0 -12.7); 17 | Package 'SW-SMT-4' ''''''; 18 | Technology ''; 19 | Connect 'SA.2' 'SA2' 'SB.2' 'SB2' 'SC.2' 'SC2' 'SD.2' 'SD2' 'SA.1' 'SA1' \ 20 | 'SB.1' 'SB1' 'SC.1' 'SC1' 'SD.1' 'SD1'; 21 | Grid mil; 22 | -------------------------------------------------------------------------------- /script/SW_MEMBRANE.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_MEMBRANE.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SW_MEMBRANE 'G$1' Next 0 (0 0); 14 | Package 'SW_MEMBRANE' ''''''; 15 | Technology ''; 16 | Connect 'G$1.2' 'P$2' 'G$1.1' 'P$1'; 17 | -------------------------------------------------------------------------------- /script/SW_MEMBRANE.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_MEMBRANE.pac'; 10 | Description ''; 11 | Layer 21; 12 | Wire 0.1524 (-3 3) (-3 -3) (3 -3) (3 3) \ 13 | (-3 3); 14 | Layer 1; 15 | Circle 1 (0 0) (2.5 0); 16 | Layer 1; 17 | Smd 'P$2' 1 1 -100 R0 (-2.5 0); 18 | Layer 29; 19 | Circle 1.2 (0 0) (2.5 0); 20 | Layer 31; 21 | Circle 1 (0 0) (2.5 0); 22 | Change Drill 0.5;Pad 'P$1' Round 2.5 R0 (0 0); 23 | Layer 21; 24 | Change Size 1.27; 25 | Change Ratio 10; 26 | Change Font Proportional; 27 | Text '>NAME' R0 (-2.8575 3.81); 28 | -------------------------------------------------------------------------------- /script/SW_PUSH_DPDT.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_PUSH_DPDT.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SW_DPDT 'SW' Next 0 (0 0); 14 | Package 'SW_PUSH_BUTTON_MINI' ''''''; 15 | Technology ''; 16 | Connect 'SW.NO1' '3' 'SW.COM1' '2' 'SW.NC1' '1' 'SW.NC2' '4' 'SW.COM2' '5' \ 17 | 'SW.NO2' '6'; 18 | -------------------------------------------------------------------------------- /script/SW_SLIDE.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_SLIDE.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SLIDE_SWITCH_SMD 'G$1' Next 0 (0 0); 14 | Package 'SLIDE_SWITCH_SMD' ''''''; 15 | Technology ''; 16 | Connect 'G$1.NO' 'NO' 'G$1.COM' 'COM' 'G$1.NC' 'NC'; 17 | -------------------------------------------------------------------------------- /script/SW_TACT_2P.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_TACT_2P.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SWITCH_1 'SW' Next 0 (0 0); 14 | Package 'SW_TACT_3X6' '-3X6'; 15 | Technology ''; 16 | Connect 'SW.1' '1' 'SW.3' '2'; 17 | -------------------------------------------------------------------------------- /script/SW_TACT_4P.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_TACT_4P.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value On; 13 | Add SWITCH_2 'G$1' Next 0 (-2.54 0); 14 | Package 'SW_TACT_SMALL' ''''''; 15 | Technology ''; 16 | Connect 'G$1.1' '1' 'G$1.2' '2' 'G$1.3' '3' 'G$1.4' '4'; 17 | -------------------------------------------------------------------------------- /script/SW_TACT_4P_B.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'SW_TACT_4P_B.dev'; 10 | Prefix 'SW'; 11 | Description ''; 12 | Value Off; 13 | Add SWITCH_3 'SW' Next 0 (0 0); 14 | Package 'SW_TACT_STANDARD_RIGHT_ANGLE' ''''''; 15 | Technology ''; 16 | Connect 'SW.3' '3' 'SW.4' '4' 'SW.1' '1' 'SW.2' '2'; 17 | Grid inch; 18 | -------------------------------------------------------------------------------- /script/TC74.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TC74.sym'; 10 | Layer 94; 11 | Wire 0.4064 (-7.62 2.54) (-7.62 -5.08) (7.62 -5.08) (7.62 2.54) \ 12 | (-7.62 2.54); 13 | Pin 'VDD' Pwr None Middle R0 Both 0 (-12.7 0); 14 | Pin 'GND' Pwr None Middle R0 Both 0 (-12.7 -2.54); 15 | Pin 'SDA' I/O None Middle R180 Both 0 (12.7 0); 16 | Pin 'SCL' I/O None Middle R180 Both 0 (12.7 -2.54); 17 | Layer 95; 18 | Change Size 1.778; 19 | Change Ratio 8; 20 | Text '>NAME' R0 (-7.62 3.175); 21 | Layer 96; 22 | Change Size 1.778; 23 | Change Ratio 8; 24 | Text '>VALUE' R0 (-7.62 -7.62); 25 | -------------------------------------------------------------------------------- /script/TERMINAL.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TERMINAL.sym'; 10 | Pin 'P' Pas Dot Short R90 Off 0 (0 -2.54); 11 | Layer 95; 12 | Change Size 1.778; 13 | Change Ratio 12; 14 | Text '>NAME' R0 (-2.54 0.635); 15 | -------------------------------------------------------------------------------- /script/TI-R-XBGA-N8.pac.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TI-R-XBGA-N8.pac'; 10 | Description ''; 11 | -------------------------------------------------------------------------------- /script/TRANSISTOR_FET-N.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TRANSISTOR_FET-N.dev'; 10 | Prefix 'Q'; 11 | Description ''; 12 | Value On; 13 | Add FET 'G$1' Next 0 (0 0); 14 | Package 'SOT-23' ''''''; 15 | Technology ''; 16 | Connect 'G$1.D' '3' 'G$1.S' '2' 'G$1.G' '1'; 17 | -------------------------------------------------------------------------------- /script/TRANSISTOR_FET_BS170.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TRANSISTOR_FET_BS170.dev'; 10 | Prefix 'Q'; 11 | Description 'N-Channel Enhancement Mode Field Effect Transistor'; 12 | Value On; 13 | Add N-MOSFET 'G$1' Next 0 (0 0); 14 | Package 'SOT-23' '-SOT-23'; 15 | Technology ''; 16 | Connect 'G$1.D' '3' 'G$1.S' '2' 'G$1.G' '1'; 17 | -------------------------------------------------------------------------------- /script/TRANSISTOR_FET_TSM2301CX.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TRANSISTOR_FET_TSM2301CX.dev'; 10 | Prefix 'Q'; 11 | Description '20V P-Channel Enhancement Mode MOSFET'; 12 | Value On; 13 | Add P-MOSFET 'G$1' Next 0 (0 0); 14 | Package 'SOT-23' ''''''; 15 | Technology ''; 16 | Connect 'G$1.D' '3' 'G$1.S' '2' 'G$1.G' '1'; 17 | -------------------------------------------------------------------------------- /script/TRIMMER.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'TRIMMER.dev'; 10 | Prefix 'R'; 11 | Description 'Trimmer resistor'; 12 | Value On; 13 | Add POT 'R' Next 0 (0 0); 14 | Package 'TRIMMER_3362P' '-3362P'; 15 | Technology ''; 16 | Connect 'R.3' '3' 'R.1' '1' 'R.2' '2'; 17 | Package 'TRIMMER_3306F' '-3306F'; 18 | Technology ''; 19 | Connect 'R.2' '2' 'R.3' '3' 'R.1' '1'; 20 | Package 'TRIMMER_3314G' '-3314G'; 21 | Technology ''; 22 | Connect 'R.1' '1' 'R.3' '3' 'R.2' '2'; 23 | -------------------------------------------------------------------------------- /script/USB_BODY_PINS.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'USB_BODY_PINS.sym'; 10 | Pin 'BODY@4' Hiz None Middle R270 Off 0 (0 12.7); 11 | Pin 'BODY@3' Hiz None Middle R270 Off 0 (5.08 12.7); 12 | Pin 'BODY@1' Hiz None Middle R90 Off 0 (0 -12.7); 13 | Pin 'BODY@2' Hiz None Middle R90 Off 0 (5.08 -12.7); 14 | -------------------------------------------------------------------------------- /script/USB_BODY_PINS2.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'USB_BODY_PINS2.sym'; 10 | Pin 'BODY@4' Hiz None Middle R270 Off 0 (0 12.7); 11 | Pin 'BODY@3' Hiz None Middle R270 Off 0 (5.08 12.7); 12 | Pin 'BODY@1' Hiz None Middle R90 Off 0 (0 -10.16); 13 | Pin 'BODY@2' Hiz None Middle R90 Off 0 (5.08 -10.16); 14 | -------------------------------------------------------------------------------- /script/USB_BODY_PINS_2P.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'USB_BODY_PINS_2P.sym'; 10 | Pin 'BODY@1' Hiz None Middle R90 Off 0 (0 -12.7); 11 | Pin 'BODY@2' Hiz None Middle R270 Off 0 (0 12.7); 12 | -------------------------------------------------------------------------------- /script/VREG_3PINS_ADJ-_.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'VREG_3PINS_ADJ-*.dev'; 10 | Prefix 'VREG'; 11 | Description 'Adjustable 3 pins voltage regulators'; 12 | Value Off; 13 | Add VREG-ADJ 'VREG' Next 0 (0 0); 14 | Package 'TO-220V' '-TO-220VA'; 15 | Technology -'' 'LM317T'; 16 | Connect 'VREG.ADJ' '1' 'VREG.VOUT' '2' 'VREG.VIN' '3'; 17 | Package 'TO-220V' '-TO-220VB'; 18 | Technology -'' 'LM337T'; 19 | Connect 'VREG.ADJ' '1' 'VREG.VIN' '2' 'VREG.VOUT' '3'; 20 | Grid inch; 21 | -------------------------------------------------------------------------------- /script/VREG_3PINS_ALT.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'VREG_3PINS_ALT.dev'; 10 | Prefix 'VREG'; 11 | Description 'Various 3 pin voltage regulators in different packages with 4th pin connected to tab
Double check the right pinout for the right part'; 12 | Value Off; 13 | Add VREG-3PIN-ALT 'VREG' Next 0 (0 0); 14 | Package 'SOT-223' '-SOT-223'; 15 | Technology ''; 16 | Connect 'VREG.GND' '1' 'VREG.VOUT' '2' 'VREG.VIN' '3' 'VREG.TAB' '4'; 17 | Grid inch; 18 | -------------------------------------------------------------------------------- /script/VREG_5PINS.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'VREG_5PINS.dev'; 10 | Prefix 'VREG'; 11 | Description '5 pins voltage regulator'; 12 | Value On; 13 | Add MIC5205 'G$1' Next 0 (0 0); 14 | Package 'SOT-23-5' '-SOT-23-5'; 15 | Technology ''; 16 | Connect 'G$1.IN' '1' 'G$1.GND' '2' 'G$1.EN' '3' 'G$1.BYP' '4' 'G$1.OUT' '5'; 17 | -------------------------------------------------------------------------------- /script/ZENER.dev.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'ZENER.dev'; 10 | Prefix 'ZD'; 11 | Description 'Zener Diode SOD-323'; 12 | Value On; 13 | Add ZENER 'G$1' Next 0 (0 0); 14 | Package 'SOD-323F' 'SOD-323F'; 15 | Technology ''; 16 | Connect 'G$1.A' 'A' 'G$1.C' 'C'; 17 | Package 'SOD-123' 'SOD-123'; 18 | Technology ''; 19 | Connect 'G$1.A' 'A' 'G$1.C' 'C'; 20 | -------------------------------------------------------------------------------- /script/ZENER.sym.scr: -------------------------------------------------------------------------------- 1 | # Autogenerated by lbrdump.ulp use lbrbuild.ulp to reconstruct library 2 | # 3 | # more info about the script: http://dangerousprototypes.com/docs/Dangerous_Prototypes_Cadsoft_Eagle_parts_library 4 | # 5 | 6 | Set Wire_Bend 2; 7 | Grid mm; 8 | 9 | Edit 'ZENER.sym'; 10 | Pin 'A' Pas None Short R0 Off 0 (-2.54 0); 11 | Pin 'C' Pas None Short R180 Off 0 (2.54 0); 12 | Layer 95; 13 | Change Size 1.778; 14 | Change Ratio 8; 15 | Text '>NAME' R0 (-2.54 1.905); 16 | Layer 96; 17 | Change Size 1.778; 18 | Change Ratio 8; 19 | Text '>VALUE' R0 (-2.54 -3.8989); 20 | Layer 94; 21 | Wire 0.254 (-1.27 -1.27) (1.27 0) (-1.27 1.27); 22 | Wire 0.254 (1.27 1.27) (1.27 0); 23 | Wire 0.254 (-1.27 1.27) (-1.27 -1.27); 24 | Wire 0.254 (1.27 0) (1.27 -1.27) (0.508 -1.27); 25 | --------------------------------------------------------------------------------