├── README.rst ├── disable-fa-web.sh ├── dnsmasq.conf ├── dump1090-fa.sh ├── dump1090.sh ├── enable-fa-web.sh ├── hostapd.conf ├── nginx_default ├── reboot-as-ap.sh ├── reboot-as-sta.sh ├── setup.sh ├── stratux_Makefile.patch ├── stratux_network_go.patch ├── wiringPi_Makefile.patch └── wlan0 /README.rst: -------------------------------------------------------------------------------- 1 | Build your own stratux from scratch 2 | ----------------------------------- 3 | 4 | 1. Make sure you have the shell access to your Raspberry Pi. 5 | 2. Run the following commands: 6 | 7 | :: 8 | 9 | # login the `pi` user 10 | cd ~/ 11 | git clone https://github.com/Determinant/stratux-zero.git 12 | stratux-zero/setup.sh 13 | 14 | 3. Pi will reboot after finishing the whole process, now you can access your 15 | stratux AP named "stratux-zero", and the password is "stratux-zero". 16 | 17 | 4. (optional) If you would like to switch to STA mode ("client" mode rather 18 | than AP mode), make sure you have the right config in 19 | ``/etc/wpa_supplicant/wpa_supplicant.conf``, and then run 20 | ``sudo stratux-zero/reboot-as-sta.sh``. 21 | 5. (optional) If you would like to see the FlightAware map UI for dump1090, run 22 | ``stratux-zero/enable-fa-web.sh``, then it will be available at 23 | ``192.168.10.1:8080``. 24 | 25 | Features 26 | -------- 27 | 28 | - Uses up-to-date flightaware dump1090 implementation (instead of the very old one shipped with stratux). 29 | - Uses the latest wiringPi. 30 | - Uses dnsmasq instead of isc-dhcp-server. 31 | - Works on my Raspberry Pi Zero W. (Tested compilation on Pi 3 Model B) 32 | -------------------------------------------------------------------------------- /disable-fa-web.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | if [[ $EUID -ne 0 ]]; then 3 | echo "This script must be run as root" 4 | exit 1 5 | fi 6 | 7 | workdir="$(dirname $(realpath ${BASH_SOURCE[0]}))" 8 | 9 | systemctl stop stratux 10 | rm -f /usr/bin/dump1090 11 | ln -sv "$workdir/dump1090.sh" /usr/bin/dump1090 12 | systemctl start stratux 13 | systemctl stop nginx 14 | systemctl disable nginx 15 | -------------------------------------------------------------------------------- /dnsmasq.conf: -------------------------------------------------------------------------------- 1 | # Configuration file for dnsmasq. 2 | # 3 | # Format is one option per line, legal options are the same 4 | # as the long options legal on the command line. See 5 | # "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. 6 | 7 | # Listen on this specific port instead of the standard DNS port 8 | # (53). Setting this to zero completely disables DNS function, 9 | # leaving only DHCP and/or TFTP. 10 | #port=5353 11 | 12 | # The following two options make you a better netizen, since they 13 | # tell dnsmasq to filter out queries which the public DNS cannot 14 | # answer, and which load the servers (especially the root servers) 15 | # unnecessarily. If you have a dial-on-demand link they also stop 16 | # these requests from bringing up the link unnecessarily. 17 | 18 | # Never forward plain names (without a dot or domain part) 19 | #domain-needed 20 | # Never forward addresses in the non-routed address spaces. 21 | #bogus-priv 22 | 23 | # Uncomment these to enable DNSSEC validation and caching: 24 | # (Requires dnsmasq to be built with DNSSEC option.) 25 | #conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf 26 | #dnssec 27 | 28 | # Replies which are not DNSSEC signed may be legitimate, because the domain 29 | # is unsigned, or may be forgeries. Setting this option tells dnsmasq to 30 | # check that an unsigned reply is OK, by finding a secure proof that a DS 31 | # record somewhere between the root and the domain does not exist. 32 | # The cost of setting this is that even queries in unsigned domains will need 33 | # one or more extra DNS queries to verify. 34 | #dnssec-check-unsigned 35 | 36 | # Uncomment this to filter useless windows-originated DNS requests 37 | # which can trigger dial-on-demand links needlessly. 38 | # Note that (amongst other things) this blocks all SRV requests, 39 | # so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. 40 | # This option only affects forwarding, SRV records originating for 41 | # dnsmasq (via srv-host= lines) are not suppressed by it. 42 | #filterwin2k 43 | 44 | # Change this line if you want dns to get its upstream servers from 45 | # somewhere other that /etc/resolv.conf 46 | #resolv-file= 47 | 48 | # By default, dnsmasq will send queries to any of the upstream 49 | # servers it knows about and tries to favour servers to are known 50 | # to be up. Uncommenting this forces dnsmasq to try each query 51 | # with each server strictly in the order they appear in 52 | # /etc/resolv.conf 53 | #strict-order 54 | 55 | # If you don't want dnsmasq to read /etc/resolv.conf or any other 56 | # file, getting its servers from this file instead (see below), then 57 | # uncomment this. 58 | #no-resolv 59 | 60 | # If you don't want dnsmasq to poll /etc/resolv.conf or other resolv 61 | # files for changes and re-read them then uncomment this. 62 | #no-poll 63 | 64 | # Add other name servers here, with domain specs if they are for 65 | # non-public domains. 66 | #server=/localnet/192.168.0.1 67 | 68 | # Example of routing PTR queries to nameservers: this will send all 69 | # address->name queries for 192.168.3/24 to nameserver 10.1.2.3 70 | #server=/3.168.192.in-addr.arpa/10.1.2.3 71 | 72 | # Add local-only domains here, queries in these domains are answered 73 | # from /etc/hosts or DHCP only. 74 | #local=/localnet/ 75 | 76 | # Add domains which you want to force to an IP address here. 77 | # The example below send any host in double-click.net to a local 78 | # web-server. 79 | #address=/double-click.net/127.0.0.1 80 | 81 | # --address (and --server) work with IPv6 addresses too. 82 | #address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83 83 | 84 | # Add the IPs of all queries to yahoo.com, google.com, and their 85 | # subdomains to the vpn and search ipsets: 86 | #ipset=/yahoo.com/google.com/vpn,search 87 | 88 | # You can control how dnsmasq talks to a server: this forces 89 | # queries to 10.1.2.3 to be routed via eth1 90 | # server=10.1.2.3@eth1 91 | 92 | # and this sets the source (ie local) address used to talk to 93 | # 10.1.2.3 to 192.168.1.1 port 55 (there must be an interface with that 94 | # IP on the machine, obviously). 95 | # server=10.1.2.3@192.168.1.1#55 96 | 97 | # If you want dnsmasq to change uid and gid to something other 98 | # than the default, edit the following lines. 99 | #user= 100 | #group= 101 | 102 | # If you want dnsmasq to listen for DHCP and DNS requests only on 103 | # specified interfaces (and the loopback) give the name of the 104 | # interface (eg eth0) here. 105 | # Repeat the line for more than one interface. 106 | #interface= 107 | # Or you can specify which interface _not_ to listen on 108 | #except-interface= 109 | # Or which to listen on by address (remember to include 127.0.0.1 if 110 | # you use this.) 111 | #listen-address= 112 | # If you want dnsmasq to provide only DNS service on an interface, 113 | # configure it as shown above, and then use the following line to 114 | # disable DHCP and TFTP on it. 115 | #no-dhcp-interface= 116 | 117 | # On systems which support it, dnsmasq binds the wildcard address, 118 | # even when it is listening on only some interfaces. It then discards 119 | # requests that it shouldn't reply to. This has the advantage of 120 | # working even when interfaces come and go and change address. If you 121 | # want dnsmasq to really bind only the interfaces it is listening on, 122 | # uncomment this option. About the only time you may need this is when 123 | # running another nameserver on the same machine. 124 | #bind-interfaces 125 | 126 | # If you don't want dnsmasq to read /etc/hosts, uncomment the 127 | # following line. 128 | #no-hosts 129 | # or if you want it to read another file, as well as /etc/hosts, use 130 | # this. 131 | #addn-hosts=/etc/banner_add_hosts 132 | 133 | # Set this (and domain: see below) if you want to have a domain 134 | # automatically added to simple names in a hosts-file. 135 | #expand-hosts 136 | 137 | # Set the domain for dnsmasq. this is optional, but if it is set, it 138 | # does the following things. 139 | # 1) Allows DHCP hosts to have fully qualified domain names, as long 140 | # as the domain part matches this setting. 141 | # 2) Sets the "domain" DHCP option thereby potentially setting the 142 | # domain of all systems configured by DHCP 143 | # 3) Provides the domain part for "expand-hosts" 144 | #domain=thekelleys.org.uk 145 | 146 | # Set a different domain for a particular subnet 147 | #domain=wireless.thekelleys.org.uk,192.168.2.0/24 148 | 149 | # Same idea, but range rather then subnet 150 | #domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200 151 | 152 | # Uncomment this to enable the integrated DHCP server, you need 153 | # to supply the range of addresses available for lease and optionally 154 | # a lease time. If you have more than one network, you will need to 155 | # repeat this for each network on which you want to supply DHCP 156 | # service. 157 | #dhcp-range=192.168.0.50,192.168.0.150,12h 158 | 159 | # This is an example of a DHCP range where the netmask is given. This 160 | # is needed for networks we reach the dnsmasq DHCP server via a relay 161 | # agent. If you don't know what a DHCP relay agent is, you probably 162 | # don't need to worry about this. 163 | #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 164 | 165 | # This is an example of a DHCP range which sets a tag, so that 166 | # some DHCP options may be set only for this network. 167 | #dhcp-range=set:red,192.168.0.50,192.168.0.150 168 | 169 | # Use this DHCP range only when the tag "green" is set. 170 | #dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h 171 | 172 | # Specify a subnet which can't be used for dynamic address allocation, 173 | # is available for hosts with matching --dhcp-host lines. Note that 174 | # dhcp-host declarations will be ignored unless there is a dhcp-range 175 | # of some type for the subnet in question. 176 | # In this case the netmask is implied (it comes from the network 177 | # configuration on the machine running dnsmasq) it is possible to give 178 | # an explicit netmask instead. 179 | #dhcp-range=192.168.0.0,static 180 | 181 | # Enable DHCPv6. Note that the prefix-length does not need to be specified 182 | # and defaults to 64 if missing/ 183 | #dhcp-range=1234::2, 1234::500, 64, 12h 184 | 185 | # Do Router Advertisements, BUT NOT DHCP for this subnet. 186 | #dhcp-range=1234::, ra-only 187 | 188 | # Do Router Advertisements, BUT NOT DHCP for this subnet, also try and 189 | # add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 190 | # hosts. Use the DHCPv4 lease to derive the name, network segment and 191 | # MAC address and assume that the host will also have an 192 | # IPv6 address calculated using the SLAAC algorithm. 193 | #dhcp-range=1234::, ra-names 194 | 195 | # Do Router Advertisements, BUT NOT DHCP for this subnet. 196 | # Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.) 197 | #dhcp-range=1234::, ra-only, 48h 198 | 199 | # Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA 200 | # so that clients can use SLAAC addresses as well as DHCP ones. 201 | #dhcp-range=1234::2, 1234::500, slaac 202 | 203 | # Do Router Advertisements and stateless DHCP for this subnet. Clients will 204 | # not get addresses from DHCP, but they will get other configuration information. 205 | # They will use SLAAC for addresses. 206 | #dhcp-range=1234::, ra-stateless 207 | 208 | # Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses 209 | # from DHCPv4 leases. 210 | #dhcp-range=1234::, ra-stateless, ra-names 211 | 212 | # Do router advertisements for all subnets where we're doing DHCPv6 213 | # Unless overridden by ra-stateless, ra-names, et al, the router 214 | # advertisements will have the M and O bits set, so that the clients 215 | # get addresses and configuration from DHCPv6, and the A bit reset, so the 216 | # clients don't use SLAAC addresses. 217 | #enable-ra 218 | 219 | # Supply parameters for specified hosts using DHCP. There are lots 220 | # of valid alternatives, so we will give examples of each. Note that 221 | # IP addresses DO NOT have to be in the range given above, they just 222 | # need to be on the same network. The order of the parameters in these 223 | # do not matter, it's permissible to give name, address and MAC in any 224 | # order. 225 | 226 | # Always allocate the host with Ethernet address 11:22:33:44:55:66 227 | # The IP address 192.168.0.60 228 | #dhcp-host=11:22:33:44:55:66,192.168.0.60 229 | 230 | # Always set the name of the host with hardware address 231 | # 11:22:33:44:55:66 to be "fred" 232 | #dhcp-host=11:22:33:44:55:66,fred 233 | 234 | # Always give the host with Ethernet address 11:22:33:44:55:66 235 | # the name fred and IP address 192.168.0.60 and lease time 45 minutes 236 | #dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m 237 | 238 | # Give a host with Ethernet address 11:22:33:44:55:66 or 239 | # 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume 240 | # that these two Ethernet interfaces will never be in use at the same 241 | # time, and give the IP address to the second, even if it is already 242 | # in use by the first. Useful for laptops with wired and wireless 243 | # addresses. 244 | #dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60 245 | 246 | # Give the machine which says its name is "bert" IP address 247 | # 192.168.0.70 and an infinite lease 248 | #dhcp-host=bert,192.168.0.70,infinite 249 | 250 | # Always give the host with client identifier 01:02:02:04 251 | # the IP address 192.168.0.60 252 | #dhcp-host=id:01:02:02:04,192.168.0.60 253 | 254 | # Always give the InfiniBand interface with hardware address 255 | # 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the 256 | # ip address 192.168.0.61. The client id is derived from the prefix 257 | # ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of 258 | # hex digits of the hardware address. 259 | #dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61 260 | 261 | # Always give the host with client identifier "marjorie" 262 | # the IP address 192.168.0.60 263 | #dhcp-host=id:marjorie,192.168.0.60 264 | 265 | # Enable the address given for "judge" in /etc/hosts 266 | # to be given to a machine presenting the name "judge" when 267 | # it asks for a DHCP lease. 268 | #dhcp-host=judge 269 | 270 | # Never offer DHCP service to a machine whose Ethernet 271 | # address is 11:22:33:44:55:66 272 | #dhcp-host=11:22:33:44:55:66,ignore 273 | 274 | # Ignore any client-id presented by the machine with Ethernet 275 | # address 11:22:33:44:55:66. This is useful to prevent a machine 276 | # being treated differently when running under different OS's or 277 | # between PXE boot and OS boot. 278 | #dhcp-host=11:22:33:44:55:66,id:* 279 | 280 | # Send extra options which are tagged as "red" to 281 | # the machine with Ethernet address 11:22:33:44:55:66 282 | #dhcp-host=11:22:33:44:55:66,set:red 283 | 284 | # Send extra options which are tagged as "red" to 285 | # any machine with Ethernet address starting 11:22:33: 286 | #dhcp-host=11:22:33:*:*:*,set:red 287 | 288 | # Give a fixed IPv6 address and name to client with 289 | # DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2 290 | # Note the MAC addresses CANNOT be used to identify DHCPv6 clients. 291 | # Note also that the [] around the IPv6 address are obligatory. 292 | #dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 293 | 294 | # Ignore any clients which are not specified in dhcp-host lines 295 | # or /etc/ethers. Equivalent to ISC "deny unknown-clients". 296 | # This relies on the special "known" tag which is set when 297 | # a host is matched. 298 | #dhcp-ignore=tag:!known 299 | 300 | # Send extra options which are tagged as "red" to any machine whose 301 | # DHCP vendorclass string includes the substring "Linux" 302 | #dhcp-vendorclass=set:red,Linux 303 | 304 | # Send extra options which are tagged as "red" to any machine one 305 | # of whose DHCP userclass strings includes the substring "accounts" 306 | #dhcp-userclass=set:red,accounts 307 | 308 | # Send extra options which are tagged as "red" to any machine whose 309 | # MAC address matches the pattern. 310 | #dhcp-mac=set:red,00:60:8C:*:*:* 311 | 312 | # If this line is uncommented, dnsmasq will read /etc/ethers and act 313 | # on the ethernet-address/IP pairs found there just as if they had 314 | # been given as --dhcp-host options. Useful if you keep 315 | # MAC-address/host mappings there for other purposes. 316 | #read-ethers 317 | 318 | # Send options to hosts which ask for a DHCP lease. 319 | # See RFC 2132 for details of available options. 320 | # Common options can be given to dnsmasq by name: 321 | # run "dnsmasq --help dhcp" to get a list. 322 | # Note that all the common settings, such as netmask and 323 | # broadcast address, DNS server and default route, are given 324 | # sane defaults by dnsmasq. You very likely will not need 325 | # any dhcp-options. If you use Windows clients and Samba, there 326 | # are some options which are recommended, they are detailed at the 327 | # end of this section. 328 | 329 | # Override the default route supplied by dnsmasq, which assumes the 330 | # router is the same machine as the one running dnsmasq. 331 | #dhcp-option=3,1.2.3.4 332 | 333 | # Do the same thing, but using the option name 334 | #dhcp-option=option:router,1.2.3.4 335 | 336 | # Override the default route supplied by dnsmasq and send no default 337 | # route at all. Note that this only works for the options sent by 338 | # default (1, 3, 6, 12, 28) the same line will send a zero-length option 339 | # for all other option numbers. 340 | #dhcp-option=3 341 | 342 | # Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 343 | #dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 344 | 345 | # Send DHCPv6 option. Note [] around IPv6 addresses. 346 | #dhcp-option=option6:dns-server,[1234::77],[1234::88] 347 | 348 | # Send DHCPv6 option for namservers as the machine running 349 | # dnsmasq and another. 350 | #dhcp-option=option6:dns-server,[::],[1234::88] 351 | 352 | # Ask client to poll for option changes every six hours. (RFC4242) 353 | #dhcp-option=option6:information-refresh-time,6h 354 | 355 | # Set option 58 client renewal time (T1). Defaults to half of the 356 | # lease time if not specified. (RFC2132) 357 | #dhcp-option=option:T1,1m 358 | 359 | # Set option 59 rebinding time (T2). Defaults to 7/8 of the 360 | # lease time if not specified. (RFC2132) 361 | #dhcp-option=option:T2,2m 362 | 363 | # Set the NTP time server address to be the same machine as 364 | # is running dnsmasq 365 | #dhcp-option=42,0.0.0.0 366 | 367 | # Set the NIS domain name to "welly" 368 | #dhcp-option=40,welly 369 | 370 | # Set the default time-to-live to 50 371 | #dhcp-option=23,50 372 | 373 | # Set the "all subnets are local" flag 374 | #dhcp-option=27,1 375 | 376 | # Send the etherboot magic flag and then etherboot options (a string). 377 | #dhcp-option=128,e4:45:74:68:00:00 378 | #dhcp-option=129,NIC=eepro100 379 | 380 | # Specify an option which will only be sent to the "red" network 381 | # (see dhcp-range for the declaration of the "red" network) 382 | # Note that the tag: part must precede the option: part. 383 | #dhcp-option = tag:red, option:ntp-server, 192.168.1.1 384 | 385 | # The following DHCP options set up dnsmasq in the same way as is specified 386 | # for the ISC dhcpcd in 387 | # http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt 388 | # adapted for a typical dnsmasq installation where the host running 389 | # dnsmasq is also the host running samba. 390 | # you may want to uncomment some or all of them if you use 391 | # Windows clients and Samba. 392 | #dhcp-option=19,0 # option ip-forwarding off 393 | #dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) 394 | #dhcp-option=45,0.0.0.0 # netbios datagram distribution server 395 | #dhcp-option=46,8 # netbios node type 396 | 397 | # Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave. 398 | #dhcp-option=252,"\n" 399 | 400 | # Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client 401 | # probably doesn't support this...... 402 | #dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com 403 | 404 | # Send RFC-3442 classless static routes (note the netmask encoding) 405 | #dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 406 | 407 | # Send vendor-class specific options encapsulated in DHCP option 43. 408 | # The meaning of the options is defined by the vendor-class so 409 | # options are sent only when the client supplied vendor class 410 | # matches the class given here. (A substring match is OK, so "MSFT" 411 | # matches "MSFT" and "MSFT 5.0"). This example sets the 412 | # mtftp address to 0.0.0.0 for PXEClients. 413 | #dhcp-option=vendor:PXEClient,1,0.0.0.0 414 | 415 | # Send microsoft-specific option to tell windows to release the DHCP lease 416 | # when it shuts down. Note the "i" flag, to tell dnsmasq to send the 417 | # value as a four-byte integer - that's what microsoft wants. See 418 | # http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true 419 | #dhcp-option=vendor:MSFT,2,1i 420 | 421 | # Send the Encapsulated-vendor-class ID needed by some configurations of 422 | # Etherboot to allow is to recognise the DHCP server. 423 | #dhcp-option=vendor:Etherboot,60,"Etherboot" 424 | 425 | # Send options to PXELinux. Note that we need to send the options even 426 | # though they don't appear in the parameter request list, so we need 427 | # to use dhcp-option-force here. 428 | # See http://syslinux.zytor.com/pxe.php#special for details. 429 | # Magic number - needed before anything else is recognised 430 | #dhcp-option-force=208,f1:00:74:7e 431 | # Configuration file name 432 | #dhcp-option-force=209,configs/common 433 | # Path prefix 434 | #dhcp-option-force=210,/tftpboot/pxelinux/files/ 435 | # Reboot time. (Note 'i' to send 32-bit value) 436 | #dhcp-option-force=211,30i 437 | 438 | # Set the boot filename for netboot/PXE. You will only need 439 | # this if you want to boot machines over the network and you will need 440 | # a TFTP server; either dnsmasq's built-in TFTP server or an 441 | # external one. (See below for how to enable the TFTP server.) 442 | #dhcp-boot=pxelinux.0 443 | 444 | # The same as above, but use custom tftp-server instead machine running dnsmasq 445 | #dhcp-boot=pxelinux,server.name,192.168.1.100 446 | 447 | # Boot for iPXE. The idea is to send two different 448 | # filenames, the first loads iPXE, and the second tells iPXE what to 449 | # load. The dhcp-match sets the ipxe tag for requests from iPXE. 450 | #dhcp-boot=undionly.kpxe 451 | #dhcp-match=set:ipxe,175 # iPXE sends a 175 option. 452 | #dhcp-boot=tag:ipxe,http://boot.ipxe.org/demo/boot.php 453 | 454 | # Encapsulated options for iPXE. All the options are 455 | # encapsulated within option 175 456 | #dhcp-option=encap:175, 1, 5b # priority code 457 | #dhcp-option=encap:175, 176, 1b # no-proxydhcp 458 | #dhcp-option=encap:175, 177, string # bus-id 459 | #dhcp-option=encap:175, 189, 1b # BIOS drive code 460 | #dhcp-option=encap:175, 190, user # iSCSI username 461 | #dhcp-option=encap:175, 191, pass # iSCSI password 462 | 463 | # Test for the architecture of a netboot client. PXE clients are 464 | # supposed to send their architecture as option 93. (See RFC 4578) 465 | #dhcp-match=peecees, option:client-arch, 0 #x86-32 466 | #dhcp-match=itanics, option:client-arch, 2 #IA64 467 | #dhcp-match=hammers, option:client-arch, 6 #x86-64 468 | #dhcp-match=mactels, option:client-arch, 7 #EFI x86-64 469 | 470 | # Do real PXE, rather than just booting a single file, this is an 471 | # alternative to dhcp-boot. 472 | #pxe-prompt="What system shall I netboot?" 473 | # or with timeout before first available action is taken: 474 | #pxe-prompt="Press F8 for menu.", 60 475 | 476 | # Available boot services. for PXE. 477 | #pxe-service=x86PC, "Boot from local disk" 478 | 479 | # Loads /pxelinux.0 from dnsmasq TFTP server. 480 | #pxe-service=x86PC, "Install Linux", pxelinux 481 | 482 | # Loads /pxelinux.0 from TFTP server at 1.2.3.4. 483 | # Beware this fails on old PXE ROMS. 484 | #pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4 485 | 486 | # Use bootserver on network, found my multicast or broadcast. 487 | #pxe-service=x86PC, "Install windows from RIS server", 1 488 | 489 | # Use bootserver at a known IP address. 490 | #pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4 491 | 492 | # If you have multicast-FTP available, 493 | # information for that can be passed in a similar way using options 1 494 | # to 5. See page 19 of 495 | # http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf 496 | 497 | 498 | # Enable dnsmasq's built-in TFTP server 499 | #enable-tftp 500 | 501 | # Set the root directory for files available via FTP. 502 | #tftp-root=/var/ftpd 503 | 504 | # Do not abort if the tftp-root is unavailable 505 | #tftp-no-fail 506 | 507 | # Make the TFTP server more secure: with this set, only files owned by 508 | # the user dnsmasq is running as will be send over the net. 509 | #tftp-secure 510 | 511 | # This option stops dnsmasq from negotiating a larger blocksize for TFTP 512 | # transfers. It will slow things down, but may rescue some broken TFTP 513 | # clients. 514 | #tftp-no-blocksize 515 | 516 | # Set the boot file name only when the "red" tag is set. 517 | #dhcp-boot=tag:red,pxelinux.red-net 518 | 519 | # An example of dhcp-boot with an external TFTP server: the name and IP 520 | # address of the server are given after the filename. 521 | # Can fail with old PXE ROMS. Overridden by --pxe-service. 522 | #dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3 523 | 524 | # If there are multiple external tftp servers having a same name 525 | # (using /etc/hosts) then that name can be specified as the 526 | # tftp_servername (the third option to dhcp-boot) and in that 527 | # case dnsmasq resolves this name and returns the resultant IP 528 | # addresses in round robin fashion. This facility can be used to 529 | # load balance the tftp load among a set of servers. 530 | #dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name 531 | 532 | # Set the limit on DHCP leases, the default is 150 533 | #dhcp-lease-max=150 534 | 535 | # The DHCP server needs somewhere on disk to keep its lease database. 536 | # This defaults to a sane location, but if you want to change it, use 537 | # the line below. 538 | #dhcp-leasefile=/var/lib/misc/dnsmasq.leases 539 | 540 | # Set the DHCP server to authoritative mode. In this mode it will barge in 541 | # and take over the lease for any client which broadcasts on the network, 542 | # whether it has a record of the lease or not. This avoids long timeouts 543 | # when a machine wakes up on a new network. DO NOT enable this if there's 544 | # the slightest chance that you might end up accidentally configuring a DHCP 545 | # server for your campus/company accidentally. The ISC server uses 546 | # the same option, and this URL provides more information: 547 | # http://www.isc.org/files/auth.html 548 | #dhcp-authoritative 549 | 550 | # Set the DHCP server to enable DHCPv4 Rapid Commit Option per RFC 4039. 551 | # In this mode it will respond to a DHCPDISCOVER message including a Rapid Commit 552 | # option with a DHCPACK including a Rapid Commit option and fully committed address 553 | # and configuration information. This must only be enabled if either the server is 554 | # the only server for the subnet, or multiple servers are present and they each 555 | # commit a binding for all clients. 556 | #dhcp-rapid-commit 557 | 558 | # Run an executable when a DHCP lease is created or destroyed. 559 | # The arguments sent to the script are "add" or "del", 560 | # then the MAC address, the IP address and finally the hostname 561 | # if there is one. 562 | #dhcp-script=/bin/echo 563 | 564 | # Set the cachesize here. 565 | #cache-size=150 566 | 567 | # If you want to disable negative caching, uncomment this. 568 | #no-negcache 569 | 570 | # Normally responses which come from /etc/hosts and the DHCP lease 571 | # file have Time-To-Live set as zero, which conventionally means 572 | # do not cache further. If you are happy to trade lower load on the 573 | # server for potentially stale date, you can set a time-to-live (in 574 | # seconds) here. 575 | #local-ttl= 576 | 577 | # If you want dnsmasq to detect attempts by Verisign to send queries 578 | # to unregistered .com and .net hosts to its sitefinder service and 579 | # have dnsmasq instead return the correct NXDOMAIN response, uncomment 580 | # this line. You can add similar lines to do the same for other 581 | # registries which have implemented wildcard A records. 582 | #bogus-nxdomain=64.94.110.11 583 | 584 | # If you want to fix up DNS results from upstream servers, use the 585 | # alias option. This only works for IPv4. 586 | # This alias makes a result of 1.2.3.4 appear as 5.6.7.8 587 | #alias=1.2.3.4,5.6.7.8 588 | # and this maps 1.2.3.x to 5.6.7.x 589 | #alias=1.2.3.0,5.6.7.0,255.255.255.0 590 | # and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40 591 | #alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0 592 | 593 | # Change these lines if you want dnsmasq to serve MX records. 594 | 595 | # Return an MX record named "maildomain.com" with target 596 | # servermachine.com and preference 50 597 | #mx-host=maildomain.com,servermachine.com,50 598 | 599 | # Set the default target for MX records created using the localmx option. 600 | #mx-target=servermachine.com 601 | 602 | # Return an MX record pointing to the mx-target for all local 603 | # machines. 604 | #localmx 605 | 606 | # Return an MX record pointing to itself for all local machines. 607 | #selfmx 608 | 609 | # Change the following lines if you want dnsmasq to serve SRV 610 | # records. These are useful if you want to serve ldap requests for 611 | # Active Directory and other windows-originated DNS requests. 612 | # See RFC 2782. 613 | # You may add multiple srv-host lines. 614 | # The fields are ,,,, 615 | # If the domain part if missing from the name (so that is just has the 616 | # service and protocol sections) then the domain given by the domain= 617 | # config option is used. (Note that expand-hosts does not need to be 618 | # set for this to work.) 619 | 620 | # A SRV record sending LDAP for the example.com domain to 621 | # ldapserver.example.com port 389 622 | #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 623 | 624 | # A SRV record sending LDAP for the example.com domain to 625 | # ldapserver.example.com port 389 (using domain=) 626 | #domain=example.com 627 | #srv-host=_ldap._tcp,ldapserver.example.com,389 628 | 629 | # Two SRV records for LDAP, each with different priorities 630 | #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 631 | #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 632 | 633 | # A SRV record indicating that there is no LDAP server for the domain 634 | # example.com 635 | #srv-host=_ldap._tcp.example.com 636 | 637 | # The following line shows how to make dnsmasq serve an arbitrary PTR 638 | # record. This is useful for DNS-SD. (Note that the 639 | # domain-name expansion done for SRV records _does_not 640 | # occur for PTR records.) 641 | #ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" 642 | 643 | # Change the following lines to enable dnsmasq to serve TXT records. 644 | # These are used for things like SPF and zeroconf. (Note that the 645 | # domain-name expansion done for SRV records _does_not 646 | # occur for TXT records.) 647 | 648 | #Example SPF. 649 | #txt-record=example.com,"v=spf1 a -all" 650 | 651 | #Example zeroconf 652 | #txt-record=_http._tcp.example.com,name=value,paper=A4 653 | 654 | # Provide an alias for a "local" DNS name. Note that this _only_ works 655 | # for targets which are names from DHCP or /etc/hosts. Give host 656 | # "bert" another name, bertrand 657 | #cname=bertand,bert 658 | 659 | # For debugging purposes, log each DNS query as it passes through 660 | # dnsmasq. 661 | #log-queries 662 | 663 | # Log lots of extra information about DHCP transactions. 664 | #log-dhcp 665 | 666 | # Include another lot of configuration options. 667 | #conf-file=/etc/dnsmasq.more.conf 668 | #conf-dir=/etc/dnsmasq.d 669 | 670 | # Include all the files in a directory except those ending in .bak 671 | #conf-dir=/etc/dnsmasq.d,.bak 672 | 673 | # Include all files in a directory which end in .conf 674 | #conf-dir=/etc/dnsmasq.d/,*.conf 675 | 676 | # If a DHCP client claims that its name is "wpad", ignore that. 677 | # This fixes a security hole. see CERT Vulnerability VU#598349 678 | #dhcp-name-match=set:wpad-ignore,wpad 679 | #dhcp-ignore-names=tag:wpad-ignore 680 | 681 | # Delays sending DHCPOFFER and proxydhcp replies for at least the specified number of seconds. 682 | dhcp-mac=set:client_is_a_pi,B8:27:EB:*:*:* 683 | dhcp-reply-delay=tag:client_is_a_pi,2 684 | 685 | interface=wlan0 686 | listen-address=192.168.10.1 687 | #bind-interfaces 688 | #server=8.8.8.8 689 | domain-needed 690 | bogus-priv 691 | dhcp-range=192.168.10.10,192.168.10.200,24h 692 | -------------------------------------------------------------------------------- /dump1090-fa.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | /opt/stratux/stratux_src/dump1090/dump1090 --write-json /opt/stratux/stratux_src/dump1090/public_html/data/ "$@" --net-stratux-port 30006 3 | -------------------------------------------------------------------------------- /dump1090.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | /opt/stratux/stratux_src/dump1090/dump1090 "$@" --net-stratux-port 30006 3 | -------------------------------------------------------------------------------- /enable-fa-web.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | if [[ $EUID -ne 0 ]]; then 3 | echo "This script must be run as root" 4 | exit 1 5 | fi 6 | 7 | workdir="$(dirname $(realpath ${BASH_SOURCE[0]}))" 8 | 9 | systemctl stop stratux 10 | rm -f /usr/bin/dump1090 11 | ln -sv "$workdir/dump1090-fa.sh" /usr/bin/dump1090 12 | systemctl start stratux 13 | systemctl start nginx 14 | systemctl enable nginx 15 | -------------------------------------------------------------------------------- /hostapd.conf: -------------------------------------------------------------------------------- 1 | interface=wlan0 2 | driver=nl80211 3 | ssid=stratux-zero 4 | hw_mode=g 5 | channel=7 6 | wmm_enabled=0 7 | macaddr_acl=0 8 | auth_algs=1 9 | ignore_broadcast_ssid=0 10 | wpa=2 11 | wpa_passphrase=stratux-zero 12 | wpa_key_mgmt=WPA-PSK 13 | wpa_pairwise=TKIP 14 | rsn_pairwise=CCMP 15 | -------------------------------------------------------------------------------- /nginx_default: -------------------------------------------------------------------------------- 1 | server { 2 | listen 8080 default_server; 3 | 4 | root /opt/stratux/stratux_src/dump1090/public_html/; 5 | 6 | index index.html index.htm index.nginx-debian.html; 7 | 8 | server_name _; 9 | 10 | location / { 11 | # First attempt to serve request as file, then 12 | # as directory, then fall back to displaying a 404. 13 | try_files $uri $uri/ =404; 14 | } 15 | } 16 | -------------------------------------------------------------------------------- /reboot-as-ap.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | if [[ $EUID -ne 0 ]]; then 3 | echo "This script must be run as root" 4 | exit 1 5 | fi 6 | 7 | workdir="$(dirname $(realpath ${BASH_SOURCE[0]}))" 8 | 9 | #rm -f /etc/network/if-up.d/wpasupplicant 10 | #rm -f /etc/network/if-pre-up.d/wpasupplicant 11 | #rm -f /etc/network/if-down.d/wpasupplicant 12 | #rm -f /etc/network/if-post-down.d/wpasupplicant 13 | systemctl disable dhcpcd 14 | systemctl unmask hostapd 15 | systemctl enable hostapd 16 | systemctl enable dnsmasq 17 | cp "$workdir/wlan0" /etc/network/interfaces.d/ 18 | reboot 19 | -------------------------------------------------------------------------------- /reboot-as-sta.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | if [[ $EUID -ne 0 ]]; then 3 | echo "This script must be run as root" 4 | exit 1 5 | fi 6 | 7 | systemctl disable hostapd 8 | systemctl disable dnsmasq 9 | systemctl enable dhcpcd 10 | rm -f /etc/network/interfaces.d/wlan0 11 | reboot 12 | -------------------------------------------------------------------------------- /setup.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash -e 2 | 3 | workdir="$(dirname $(realpath ${BASH_SOURCE[0]}))" 4 | 5 | # update the base image 6 | function update_base { 7 | sudo apt-get install rpi-update 8 | sudo apt-get update 9 | sudo apt-get dist-upgrade 10 | sudo apt-get upgrade 11 | } 12 | 13 | # install dependencies 14 | function install_dep { 15 | sudo apt-get install -y vim 16 | sudo apt-get install -y iw 17 | sudo apt-get install -y lshw 18 | sudo apt-get install -y wget 19 | sudo apt-get install -y gpsd 20 | sudo apt-get install -y tcpdump 21 | sudo apt-get install -y libusb-1.0-0-dev 22 | sudo apt-get install -y build-essential 23 | sudo apt-get install -y cmake 24 | sudo apt-get install -y golang 25 | sudo apt-get install -y mercurial 26 | sudo apt-get install -y autoconf 27 | sudo apt-get install -y fftw3 28 | sudo apt-get install -y fftw3-dev 29 | sudo apt-get install -y libtool 30 | sudo apt-get install -y automake 31 | sudo apt-get install -y pkg-config 32 | sudo apt-get install -y libjpeg-dev i2c-tools python-smbus python-pip python-dev python-pil python-daemon screen 33 | sudo apt-get install -y libsdl-dev 34 | sudo apt-get install -y git 35 | # dump1090-fa deps 36 | sudo apt-get install -y build-essential debhelper librtlsdr-dev pkg-config dh-systemd libncurses5-dev libbladerf-dev 37 | # optional deps 38 | sudo apt-get install -y hostapd dnsmasq nginx 39 | git config --global http.sslVerify false 40 | } 41 | 42 | # download and compile github packages 43 | function prepare_stratux { 44 | sudo mkdir /opt/stratux 45 | sudo chown pi.pi /opt/stratux 46 | 47 | cd /opt/stratux 48 | git clone --depth=1 --branch v1.6r1 https://github.com/cyoung/stratux.git stratux_src 49 | cd stratux_src 50 | git clone --depth=1 --branch stratux https://github.com/Determinant/dump1090-fa-stratux.git dump1090 51 | git submodule update --init --recursive goflying 52 | patch < "$workdir/stratux_Makefile.patch" Makefile 53 | patch < "$workdir/stratux_network_go.patch" main/network.go 54 | 55 | # build librtlsdr 56 | cd /opt/stratux 57 | git clone https://github.com/jpoirier/librtlsdr 58 | cd librtlsdr 59 | mkdir build 60 | cd build 61 | cmake ../ 62 | make 63 | sudo make install 64 | sudo ldconfig 65 | 66 | # build kalibrate-rtl 67 | cd /opt/stratux 68 | git clone https://github.com/steve-m/kalibrate-rtl 69 | cd kalibrate-rtl 70 | ./bootstrap 71 | ./configure 72 | make 73 | sudo make install 74 | 75 | # build wiringpi 76 | sudo apt-get purge wiringpi 77 | cd /opt/stratux 78 | git clone https://github.com/WiringPi/WiringPi.git wiringPi 79 | cd wiringPi 80 | git checkout 5bbb6e3 81 | patch < "$workdir/wiringPi_Makefile.patch" wiringPi/Makefile 82 | sudo ./build 83 | cd wiringPi 84 | make static 85 | sudo make install-static 86 | } 87 | 88 | function build_stratux { 89 | export GOPATH=/opt/stratux/go 90 | export GOROOT=$(go env | grep GOROOT | sed 's/[^=]*="\(.*\)"$/\1/g') 91 | export CGO_CFLAGS_ALLOW=-L/opt/stratux/stratux_src 92 | export PATH=$GOPATH/bin:$PATH 93 | 94 | cd /opt/stratux/stratux_src 95 | make 96 | sudo rm -f /usr/bin/dump1090 97 | sudo -E make install 98 | } 99 | 100 | # copy various configs to their proper locations 101 | function deploy_config { 102 | sudo cp -f /opt/stratux/stratux_src/image/motd /etc/motd 103 | #sudo cp -f /opt/stratux/stratux_src/image/dhcpd-not_smart.conf /etc/dhcp/dhcpd.conf 104 | sudo cp -f /opt/stratux/stratux_src/image/hostapd.conf /etc/hostapd/hostapd.conf 105 | sudo cp -f /opt/stratux/stratux_src/image/hostapd-edimax.conf /etc/hostapd/hostapd-edimax.conf 106 | sudo cp -f /opt/stratux/stratux_src/image/hostapd_manager.sh /usr/sbin/hostapd_manager.sh 107 | sudo chmod 755 /usr/sbin/hostapd_manager.sh 108 | sudo cp -f /opt/stratux/stratux_src/image/hostapd-edimax /usr/sbin/hostapd-edimax 109 | sudo rm -f mnt/etc/rc*.d/hostapd mnt/etc/network/if-pre-up.d/hostapd mnt/etc/network/if-post-down.d/hostapd mnt/etc/init.d/hostapd mnt/etc/default/hostapd 110 | sudo cp -f /opt/stratux/stratux_src/image/stratux-wifi.sh /usr/sbin/stratux-wifi.sh 111 | sudo chmod 755 /usr/sbin/stratux-wifi.sh 112 | sudo cp -f /opt/stratux/stratux_src/image/sdr-tool.sh /usr/sbin/sdr-tool.sh 113 | sudo chmod 755 /usr/sbin/sdr-tool.sh 114 | #sudo cp -f /opt/stratux/stratux_src/image/.rules /etc/udev/rules.d/ 115 | sudo rm -rf /usr/bin/fancontrol.py 116 | sudo cp -f /opt/stratux/stratux_src/image/stxAliases.txt /root/.stxAliases 117 | sudo cp -f /opt/stratux/stratux_src/image/logrotate_d_stratux /etc/logrotate.d/stratux 118 | 119 | cp -f /opt/stratux/stratux_src/image/stxAliases.txt /home/pi/.stxAliases 120 | cat > /home/pi/.bash_profile < 2 && spaced[0] == "lease" { 25 | - open_block = true 26 | - block_ip = spaced[1] 27 | - } else if open_block && len(spaced) >= 4 && spaced[2] == "client-hostname" { 28 | - hostname := strings.TrimRight(strings.TrimLeft(strings.Join(spaced[3:], " "), "\""), "\";") 29 | - ret[block_ip] = hostname 30 | - open_block = false 31 | - } else if open_block && strings.HasPrefix(spaced[0], "}") { // No hostname. 32 | - open_block = false 33 | - ret[block_ip] = "" 34 | + if len(spaced) > 2 { 35 | + dnsmasq_ip := spaced[2] 36 | + hostname := spaced[3] 37 | + if spaced[3] == "*" { 38 | + hostname = "" 39 | + } 40 | + ret[dnsmasq_ip] = hostname 41 | } 42 | } 43 | 44 | -------------------------------------------------------------------------------- /wiringPi_Makefile.patch: -------------------------------------------------------------------------------- 1 | diff --git a/wiringPi/Makefile b/wiringPi/Makefile 2 | index 287fa58..db2b519 100644 3 | --- a/wiringPi/Makefile 4 | +++ b/wiringPi/Makefile 5 | @@ -70,8 +70,12 @@ OBJ = $(SRC:.c=.o) 6 | all: $(DYNAMIC) 7 | 8 | .PHONY: static 9 | -static: 10 | - $Q cat noMoreStatic 11 | +static: $(STATIC) 12 | + 13 | +$(STATIC): $(OBJ) 14 | + $Q echo "[Link (Static)]" 15 | + $Q ar rcs $(STATIC) $(OBJ) 16 | + $Q ranlib $(STATIC) 17 | 18 | $(DYNAMIC): $(OBJ) 19 | $Q echo "[Link (Dynamic)]" 20 | @@ -104,6 +108,15 @@ install: $(DYNAMIC) 21 | $Q ln -sf $(DESTDIR)$(PREFIX)/lib/libwiringPi.so.$(VERSION) $(DESTDIR)/lib/libwiringPi.so 22 | $Q $(LDCONFIG) 23 | 24 | +.PHONY: install-static 25 | +install-static: $(STATIC) 26 | + $Q echo "[Install Headers]" 27 | + $Q install -m 0755 -d $(DESTDIR)$(PREFIX)/include 28 | + $Q install -m 0644 $(HEADERS) $(DESTDIR)$(PREFIX)/include 29 | + $Q echo "[Install Static Lib]" 30 | + $Q install -m 0755 -d $(DESTDIR)$(PREFIX)/lib 31 | + $Q install -m 0755 libwiringPi.a $(DESTDIR)$(PREFIX)/lib 32 | + 33 | .PHONY: install-deb 34 | install-deb: $(DYNAMIC) 35 | $Q echo "[Install Headers: deb]" 36 | -------------------------------------------------------------------------------- /wlan0: -------------------------------------------------------------------------------- 1 | allow-hotplug wlan0 2 | iface wlan0 inet static 3 | address 192.168.10.1 4 | netmask 255.255.255.0 5 | network 192.168.10.0 6 | broadcast 192.168.10.255 7 | --------------------------------------------------------------------------------