├── .gitignore ├── Dockerfile ├── Dockerfile-5.6.18 ├── Dockerfile-7.3.02 ├── Dockerfile-old ├── LICENSE ├── README.md ├── build.sh ├── conf5 ├── php-fpm.conf.example └── php.ini.example ├── conf7 ├── README.md ├── docker.conf ├── php-fpm.conf ├── www.conf └── zz-docker.conf ├── exec.sh ├── init.sh ├── php-fpm-dev ├── Dockerfile ├── README.md ├── build.sh ├── phpunit.phar └── run.sh ├── php-fpm-ext ├── Dockerfile └── README.md ├── run.sh.example ├── start.sh └── test └── Dockerfile /.gitignore: -------------------------------------------------------------------------------- 1 | /conf/php.ini 2 | /conf/php-fpm.conf 3 | /run.sh 4 | -------------------------------------------------------------------------------- /Dockerfile: -------------------------------------------------------------------------------- 1 | # 2 | # PHP Dockerfile 3 | # 满足laravel5.2版本的基本要求 4 | # 5 | # https://github.com/ibbd/dockerfile-php-fpm 6 | # 7 | # sudo docker build -t ibbd/php-fpm ./ 8 | # 9 | 10 | # Pull base image. 11 | FROM php:5.6-fpm 12 | 13 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 14 | 15 | # Install modules 16 | # composer需要先安装zip 17 | RUN \ 18 | apt-get update \ 19 | && apt-get install -y --no-install-recommends \ 20 | libmcrypt-dev \ 21 | libssl-dev \ 22 | && apt-get autoremove \ 23 | && apt-get clean \ 24 | && rm -r /var/lib/apt/lists/* 25 | 26 | # install php modules 27 | # pecl install php modules 28 | # 安装mongo扩展时，出现如下错误： 29 | # Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20131226/mongo.so' 30 | # 需要先安装libssl-dev 31 | # 如果本地构建的话，建议先下载好相应的扩展包 32 | # 直接使用pecl install msgpack会报错： 33 | # Failed to download pecl/msgpack within preferred state "stable", latest release is version 0.5.7, stability "beta", use "channel://pecl.php.net/msgpack-0.5.7" to install 34 | # 注意：msgpack 2.0.0需要php7 35 | #&& pecl install msgpack-beta \ 36 | #&& pecl install mongo \ 37 | #&& echo "extension=mongo.so" > /usr/local/etc/php/conf.d/mongo.ini \ 38 | # 2016-05-25 基础镜像与扩展镜像分离 39 | # iconv tokenizer pdo mbstring: 已经包含在基础镜像里 40 | # mysqli, mysql: 都转移到ibbd/php-fpm-ext镜像 41 | # gd库转移到ibbd/php-fpm-ext镜像 42 | # memcache, imagick, mysqli, mysql扩展转移到ibbd/php-fpm-ext库 43 | RUN \ 44 | docker-php-ext-install mcrypt pdo_mysql zip \ 45 | && pecl install redis \ 46 | && echo "extension=redis.so" > /usr/local/etc/php/conf.d/redis.ini \ 47 | && pecl install channel://pecl.php.net/msgpack-0.5.7 \ 48 | && echo "extension=msgpack.so" > /usr/local/etc/php/conf.d/msgpack.ini \ 49 | && pecl install mongodb \ 50 | && echo "extension=mongodb.so" > /usr/local/etc/php/conf.d/mongodb.ini \ 51 | && pecl clear-cache 52 | 53 | # composer 54 | # composer中国镜像 55 | # 注意：需要先安装lumen，在安装laravel，否则报错 56 | # 不应在镜像中绑定国内的镜像，因为镜像可能会用到国外的服务器 57 | # 测试国内的容易抽风。。 58 | #&& curl -sS https://getcomposer.org/installer -o /composer.php \ 59 | #&& php composer.php \ 60 | #&& mv composer.phar /usr/local/bin/composer \ 61 | #&& composer config -g repo.packagist composer http://packagist.phpcomposer.com \ 62 | #&& rm -f composer.php \ 63 | #&& chmod 755 /usr/local/bin/composer \ 64 | #&& php -r "if (hash('SHA384', file_get_contents('composer-setup.php')) === 'fd26ce67e3b237fffd5e5544b45b0d92c41a4afe3e3f778e942e43ce6be197b9cdc7c251dcde6e2a52297ea269370680') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); }" \ 65 | RUN cd / \ 66 | && php -r "readfile('https://getcomposer.org/installer');" > composer-setup.php \ 67 | && php composer-setup.php --filename=composer --install-dir=/usr/local/bin/ \ 68 | && rm composer-setup.php \ 69 | && composer global require "laravel/lumen-installer" \ 70 | && composer global require "laravel/installer" \ 71 | && composer clearcache \ 72 | && composer clear-cache 73 | 74 | 75 | # 解决时区问题 76 | ENV TZ "Asia/Shanghai" 77 | 78 | # 终端设置 79 | # 执行php-fpm时，默认值是dumb，这时在终端操作时可能会出现：terminal is not fully functional 80 | ENV TERM xterm 81 | 82 | # Define mountable directories. 83 | VOLUME /var/www 84 | 85 | # 工作目录 86 | WORKDIR /var/www 87 | 88 | EXPOSE 9000 89 | -------------------------------------------------------------------------------- /Dockerfile-5.6.18: -------------------------------------------------------------------------------- 1 | # 2 | # PHP Dockerfile 3 | # 满足laravel5.2版本的基本要求 4 | # 5 | # https://github.com/ibbd/dockerfile-php-fpm 6 | # 7 | # sudo docker build -t ibbd/php-fpm ./ 8 | # 9 | 10 | # Pull base image. 11 | FROM php:5.6.18-fpm 12 | 13 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 14 | 15 | # Install modules 16 | # composer需要先安装zip 17 | RUN \ 18 | apt-get update \ 19 | && apt-get install -y --no-install-recommends \ 20 | libmcrypt-dev \ 21 | libssl-dev \ 22 | libsasl2-dev \ 23 | && apt-get autoremove \ 24 | && apt-get clean \ 25 | && rm -r /var/lib/apt/lists/* 26 | 27 | # install php modules 28 | # pecl install php modules 29 | # 安装mongo扩展时，出现如下错误： 30 | # Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20131226/mongo.so' 31 | # 需要先安装libssl-dev 32 | # 如果本地构建的话，建议先下载好相应的扩展包 33 | # 直接使用pecl install msgpack会报错： 34 | # Failed to download pecl/msgpack within preferred state "stable", latest release is version 0.5.7, stability "beta", use "channel://pecl.php.net/msgpack-0.5.7" to install 35 | # 注意：msgpack 2.0.0需要php7 36 | #&& pecl install msgpack-beta \ 37 | #&& pecl install mongo \ 38 | #&& echo "extension=mongo.so" > /usr/local/etc/php/conf.d/mongo.ini \ 39 | # 2016-05-25 基础镜像与扩展镜像分离 40 | # iconv tokenizer pdo mbstring: 已经包含在基础镜像里 41 | # mysqli, mysql: 都转移到ibbd/php-fpm-ext镜像 42 | # gd库转移到ibbd/php-fpm-ext镜像 43 | # memcache, imagick, mysqli, mysql扩展转移到ibbd/php-fpm-ext库 44 | #RUN docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \ 45 | #&& docker-php-ext-install gd \ 46 | #&& docker-php-ext-install mcrypt mysqli mysql zip \ 47 | RUN docker-php-ext-install mcrypt mysqli mysql pdo_mysql zip \ 48 | && pecl install redis \ 49 | && echo "extension=redis.so" > /usr/local/etc/php/conf.d/redis.ini \ 50 | && pecl install channel://pecl.php.net/msgpack-0.5.7 \ 51 | && echo "extension=msgpack.so" > /usr/local/etc/php/conf.d/msgpack.ini \ 52 | && pecl install mongodb \ 53 | && echo "extension=mongodb.so" > /usr/local/etc/php/conf.d/mongodb.ini \ 54 | && pecl install mongo \ 55 | && echo "extension=mongo.so" > /usr/local/etc/php/conf.d/mongo.ini \ 56 | && pecl clear-cache 57 | 58 | # composer 59 | # composer中国镜像 60 | # 注意：需要先安装lumen，在安装laravel，否则报错 61 | # 不应在镜像中绑定国内的镜像，因为镜像可能会用到国外的服务器 62 | # 测试国内的容易抽风。。 63 | #&& curl -sS https://getcomposer.org/installer -o /composer.php \ 64 | #&& php composer.php \ 65 | #&& mv composer.phar /usr/local/bin/composer \ 66 | #&& composer config -g repo.packagist composer http://packagist.phpcomposer.com \ 67 | #&& rm -f composer.php \ 68 | #&& chmod 755 /usr/local/bin/composer \ 69 | #&& php -r "if (hash('SHA384', file_get_contents('composer-setup.php')) === 'fd26ce67e3b237fffd5e5544b45b0d92c41a4afe3e3f778e942e43ce6be197b9cdc7c251dcde6e2a52297ea269370680') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); }" \ 70 | RUN cd / \ 71 | && php -r "readfile('https://getcomposer.org/installer');" > composer-setup.php \ 72 | && php composer-setup.php --filename=composer --install-dir=/usr/local/bin/ \ 73 | && rm composer-setup.php \ 74 | && composer global require "laravel/lumen-installer" \ 75 | && composer global require "laravel/installer" \ 76 | && composer clearcache \ 77 | && composer clear-cache 78 | 79 | 80 | # 解决时区问题 81 | ENV TZ "Asia/Shanghai" 82 | 83 | # 终端设置 84 | # 执行php-fpm时，默认值是dumb，这时在终端操作时可能会出现：terminal is not fully functional 85 | ENV TERM xterm 86 | 87 | # Define mountable directories. 88 | VOLUME /var/www 89 | 90 | # 工作目录 91 | WORKDIR /var/www 92 | 93 | EXPOSE 9000 94 | -------------------------------------------------------------------------------- /Dockerfile-7.3.02: -------------------------------------------------------------------------------- 1 | # 在官方的镜像上增加简单 2 | FROM php:7.3.2-fpm 3 | 4 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 5 | 6 | # 安装扩展 7 | # https://github.com/docker-library/php/issues/662 8 | RUN apt-get update \ 9 | && apt-get install -y --no-install-recommends \ 10 | libzip4 \ 11 | libzip-dev \ 12 | unzip \ 13 | libmcrypt-dev \ 14 | libssl-dev \ 15 | libfreetype6-dev \ 16 | libjpeg62-turbo-dev \ 17 | libpng-dev \ 18 | && apt-get autoremove \ 19 | && apt-get clean \ 20 | && rm -r /var/lib/apt/lists/* \ 21 | && cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime 22 | 23 | # 安装扩展 24 | # https://github.com/docker-library/php/issues/541 25 | RUN docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ --with-png-dir=/usr/include/ \ 26 | && docker-php-ext-install gd \ 27 | && docker-php-ext-install pdo_mysql zip mysqli \ 28 | && pecl install mcrypt-1.0.2 \ 29 | && docker-php-ext-enable mcrypt \ 30 | && pecl install msgpack \ 31 | && echo "extension=msgpack.so" > /usr/local/etc/php/conf.d/msgpack.ini \ 32 | && pecl install mongodb \ 33 | && echo "extension=mongodb.so" > /usr/local/etc/php/conf.d/mongodb.ini \ 34 | && pecl install redis \ 35 | && echo "extension=redis.so" > /usr/local/etc/php/conf.d/redis.ini \ 36 | && pecl clear-cache 37 | 38 | # 安装composer 39 | RUN cd / \ 40 | && php -r "readfile('https://getcomposer.org/installer');" > composer-setup.php \ 41 | && php composer-setup.php --filename=composer --install-dir=/usr/local/bin/ \ 42 | && rm composer-setup.php \ 43 | && composer global require "laravel/lumen-installer" \ 44 | && composer global require "laravel/installer" \ 45 | && composer clearcache \ 46 | && composer clear-cache 47 | 48 | # 解决时区问题 49 | ENV TZ "Asia/Shanghai" 50 | 51 | # 终端设置 52 | ENV TERM xterm 53 | 54 | # 工作目录 55 | WORKDIR /var/www 56 | 57 | # 监听端口 58 | EXPOSE 9000 59 | -------------------------------------------------------------------------------- /Dockerfile-old: -------------------------------------------------------------------------------- 1 | # 2 | ######################################### 3 | # 这是就架构下的dockerfile 4 | ######################################### 5 | # 6 | # PHP Dockerfile 7 | # 满足laravel5.1版本的基本要求，包含了很多杂七杂八的扩展 8 | # 9 | # https://github.com/ibbd/dockerfile-php-fpm 10 | # 11 | # 下载相关资源：./download.sh 12 | # sudo docker build -t ibbd/php-fpm ./ 13 | # 14 | 15 | # Pull base image. 16 | FROM php:5.6-fpm 17 | 18 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 19 | 20 | # sources.list 21 | # git clone git@github.com:IBBD/docker-compose.git 22 | # 如果导致apt-get Install不成功，可以先注释这句 23 | #ADD ext/sources.list /etc/apt/sources.list 24 | 25 | # Install modules 26 | # composer需要先安装zip 27 | # pecl install imagick时需要libmagickwand-dev。但是这个安装的东西有点多，python2.7也安装了 28 | RUN \ 29 | apt-get update \ 30 | && apt-get install -y --no-install-recommends \ 31 | libmcrypt-dev \ 32 | libfreetype6-dev \ 33 | libjpeg62-turbo-dev \ 34 | libpng12-dev \ 35 | libssl-dev \ 36 | libmagickwand-dev \ 37 | && apt-get autoremove \ 38 | && apt-get clean \ 39 | && rm -r /var/lib/apt/lists/* 40 | 41 | 42 | #COPY ext/msgpack.tgz /msgpack.tgz 43 | #COPY ext/composer.php /composer.php 44 | 45 | # install php modules 46 | # pecl install php modules 47 | # 安装mongo扩展时，出现如下错误： 48 | # Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20131226/mongo.so' 49 | # 需要先安装libssl-dev 50 | # 如果本地构建的话，建议先下载好相应的扩展包 51 | # 直接使用pecl install msgpack会报错： 52 | # Failed to download pecl/msgpack within preferred state "stable", latest release is version 0.5.7, stability "beta", use "channel://pecl.php.net/msgpack-0.5.7" to install 53 | # 54 | # install imagick 报错如下 55 | # checking ImageMagick MagickWand API configuration program... configure: error: not found. Please provide a path to MagickWand-config or Wand-config program. 56 | # ERROR: `/tmp/pear/temp/imagick/configure --with-php-config=/usr/local/bin/php-config --with-imagick' failed 57 | # 原因：由于安装imagick扩展时需要依赖ImageMagick的函数库，因此必须要先安装ImageMagick, 但是安装了却依然不行。官网上有人评论需要安装libmagickwand-dev 58 | # 解决：apt-get install libmagickwand-dev 59 | # 60 | # 注意：msgpack 2.0.0需要php7 61 | #&& pecl install msgpack-beta \ 62 | # 2016-03-09 增加mysql扩展 63 | # 2016-07-12 增加soap扩展 64 | RUN docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \ 65 | && docker-php-ext-install gd \ 66 | && docker-php-ext-install soap \ 67 | && docker-php-ext-install iconv mcrypt pdo_mysql tokenizer mbstring zip mysqli mysql \ 68 | && pecl install redis-2.2.8 \ 69 | && echo "extension=redis.so" > /usr/local/etc/php/conf.d/redis.ini \ 70 | && pecl install memcache \ 71 | && echo "extension=memcache.so" > /usr/local/etc/php/conf.d/memcache.ini \ 72 | && pecl install channel://pecl.php.net/msgpack-0.5.7 \ 73 | && echo "extension=msgpack.so" > /usr/local/etc/php/conf.d/msgpack.ini \ 74 | && pecl install mongo \ 75 | && echo "extension=mongo.so" > /usr/local/etc/php/conf.d/mongo.ini \ 76 | && pecl install mongodb \ 77 | && echo "extension=mongodb.so" > /usr/local/etc/php/conf.d/mongodb.ini \ 78 | && pecl install imagick-beta \ 79 | && echo "extension=imagick.so" > /usr/local/etc/php/conf.d/imagick.ini \ 80 | && pecl clear-cache 81 | 82 | # composer 83 | # composer中国镜像 84 | # 注意：需要先安装lumen，在安装laravel，否则报错 85 | # 不应在镜像中绑定国内的镜像，因为镜像可能会用到国外的服务器 86 | # 测试国内的容易抽风。。 87 | #&& curl -sS https://getcomposer.org/installer -o /composer.php \ 88 | #&& php composer.php \ 89 | #&& mv composer.phar /usr/local/bin/composer \ 90 | #&& composer config -g repo.packagist composer http://packagist.phpcomposer.com \ 91 | #&& rm -f composer.php \ 92 | #&& chmod 755 /usr/local/bin/composer \ 93 | #&& php -r "if (hash('SHA384', file_get_contents('composer-setup.php')) === 'fd26ce67e3b237fffd5e5544b45b0d92c41a4afe3e3f778e942e43ce6be197b9cdc7c251dcde6e2a52297ea269370680') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); }" \ 94 | RUN cd / \ 95 | && php -r "readfile('https://getcomposer.org/installer');" > composer-setup.php \ 96 | && php composer-setup.php --filename=composer --install-dir=/usr/local/bin/ \ 97 | && rm composer-setup.php \ 98 | && composer global require "laravel/lumen-installer" \ 99 | && composer global require "laravel/installer" \ 100 | && composer clearcache \ 101 | && composer clear-cache 102 | 103 | 104 | # 解决时区问题 105 | ENV TZ "Asia/Shanghai" 106 | 107 | # 终端设置 108 | # 执行php-fpm时，默认值是dumb，这时在终端操作时可能会出现：terminal is not fully functional 109 | ENV TERM xterm 110 | 111 | # Define mountable directories. 112 | VOLUME /var/www 113 | 114 | # 工作目录 115 | WORKDIR /var/www 116 | 117 | EXPOSE 9000 118 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | The MIT License (MIT) 2 | 3 | Copyright (c) 2015 IBBD 4 | 5 | Permission is hereby granted, free of charge, to any person obtaining a copy 6 | of this software and associated documentation files (the "Software"), to deal 7 | in the Software without restriction, including without limitation the rights 8 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 9 | copies of the Software, and to permit persons to whom the Software is 10 | furnished to do so, subject to the following conditions: 11 | 12 | The above copyright notice and this permission notice shall be included in all 13 | copies or substantial portions of the Software. 14 | 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 18 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 20 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 21 | SOFTWARE. 22 | 23 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # PHP FPM 镜像 For Laravel and Lumen 2 | 3 | ## php5.6-fpm镜像体系 4 | 5 | - `php5.6-fpm`: 这是基础镜像 6 | - `ibbd/php-fpm`：用于生产环境。没有多余的插件，包括过时的插件（如mysql）和多余的插件（例如gd等） 7 | - `ibbd/php-fpm-ext`: 用于生产环境, 基于`ibbd/php-fpm`。包含一些项目可能需要用到的插件（例如mysql，gd等） 8 | - `ibbd/php-fpm-dev`: 用于测试环境及本地。在`ibbd/php-fpm-ext`的基础上包含一些测试工具等 9 | 10 | ## 更新记录 11 | 12 | 2017.07.28 13 | 14 | 更新到5.6.31, 用Dockerfile-old文件编译升级成功 15 | 16 | 2017.04.28 17 | 18 | 更新到5.6.30 19 | 20 | 2016.06.28 21 | 22 | 更新到5.6.23 23 | 24 | 2016.05.25 25 | 26 | 镜像结构体系调整，把`ibbd/php-fpm`镜像分拆成了基础镜像`ibbd/php-fpm`和扩展镜像`ibbd/php-fpm-ext` 27 | 28 | 2016.05.03 29 | 30 | - php升级到5.6.21 31 | 32 | 2016.03.18 33 | 34 | - 增加mongodb插件 35 | 36 | 2016.03.09 37 | 38 | - php版本升级到5.6.19 39 | - 增加mysql扩展（有些变态的框架还在用这个扩展） 40 | 41 | 2016.02.26 42 | 43 | 更改composer的安装方式，去掉packagist的国内镜像（可能用到国外服务器，而且也不稳定） 44 | 45 | 2016.02.26 46 | 47 | php版本更新到5.6.18 48 | 49 | 2016.01.22 50 | 51 | php版本更新到5.6.17 52 | 53 | ## 基础说明 54 | 55 | 该镜像主要为满足 `laravel5` 框架而制作，并附加了 `redis`, `mongodb`, `msgpack`等扩展。 56 | 57 | 说明： 58 | 59 | - 基础镜像：[php-fpm](https://hub.docker.com/_/php) 60 | - 如果需要扩展功能，请使用`ibbd/php-fpm-ext` 61 | - 如果需要phpunit，xdebug，pman等测试及开发工具，请使用`ibbd/php-fpm-dev`镜像，对应的dockerfile在目录`php-fpm-dev`下。 62 | - 如果只是使用php的命令行，可以使用对应的cli镜像（含swoole）：`ibbd/php-cli`和`ibbd-cli-dev` 63 | 64 | ## PHP扩展 65 | 66 | - mcrypt 67 | - redis 68 | - mongodb 69 | - msgpack 70 | - zip 71 | 72 | 附加安装 73 | 74 | - composer（全局安装） 75 | - Laravel Installer: 文档https://laravel.com/docs/ 76 | - Lumen Installer: 文档https://lumen.laravel.com/docs/ 77 | 78 | ## 安装 79 | 80 | - Dockerfile: `sudo ./build.sh` 81 | - Pull: `sudo docker pull ibbd/php-fpm` 82 | 83 | ## 使用 84 | 85 | ```sh 86 | # 代码目录 87 | code_path=/var/www 88 | 89 | # 日志目录 90 | logs_path=/var/log/php 91 | 92 | current_path=$(pwd) 93 | docker run --name=ibbd-php-fpm -d \ 94 | -p 9000:9000 \ 95 | -v $code_path:/var/www \ 96 | -v $logs_path:/var/log/php \ 97 | -v $current_path/conf/php.ini:/usr/local/etc/php/php.ini:ro \ 98 | -v $current_path/conf/php-fpm.conf:/usr/local/etc/php-fpm.conf:ro \ 99 | ibbd/php-fpm \ 100 | php-fpm -c /usr/local/etc/php/php.ini -y /usr/local/etc/php-fpm.conf 101 | ``` 102 | 103 | 说明：完整的应用见 `./run.sh.example` 104 | 105 | -------------------------------------------------------------------------------- /build.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | # 清除已有的 4 | docker stop ibbd-php-fpm 5 | docker rm ibbd-php-fpm 6 | docker rmi ibbd/php-fpm 7 | 8 | # 重新生成 9 | docker build -t ibbd/php-fpm ./ 10 | 11 | -------------------------------------------------------------------------------- /conf5/php-fpm.conf.example: -------------------------------------------------------------------------------- 1 | [global] 2 | 3 | error_log = /var/log/php/fpm-error.log 4 | ;error_log = /proc/self/fd/2 5 | daemonize = no 6 | 7 | [www] 8 | 9 | ;access.log = /var/log/php/fpm-access.log 10 | access.log = /proc/self/fd/2 11 | access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" 12 | 13 | user = www-data 14 | group = www-data 15 | 16 | listen = [::]:9000 17 | 18 | pm = dynamic 19 | ;pm = static 20 | pm.max_children = 50 21 | pm.start_servers = 10 22 | pm.min_spare_servers = 10 23 | pm.max_spare_servers = 30 24 | 25 | clear_env = no 26 | 27 | 28 | rlimit_files = 1048576 29 | ;request_terminate_timeout = 0 30 | ;request_slowlog_timeout = 1 31 | ;slowlog = /var/log/php/php-slow.log 32 | 33 | -------------------------------------------------------------------------------- /conf5/php.ini.example: -------------------------------------------------------------------------------- 1 | [PHP] 2 | 3 | ;;;;;;;;;;;;;;;;;;; 4 | ; About php.ini ; 5 | ;;;;;;;;;;;;;;;;;;; 6 | ; PHP's initialization file, generally called php.ini, is responsible for 7 | ; configuring many of the aspects of PHP's behavior. 8 | 9 | ; PHP attempts to find and load this configuration from a number of locations. 10 | ; The following is a summary of its search order: 11 | ; 1. SAPI module specific location. 12 | ; 2. The PHPRC environment variable. (As of PHP 5.2.0) 13 | ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) 14 | ; 4. Current working directory (except CLI) 15 | ; 5. The web server's directory (for SAPI modules), or directory of PHP 16 | ; (otherwise in Windows) 17 | ; 6. The directory from the --with-config-file-path compile time option, or the 18 | ; Windows directory (C:\windows or C:\winnt) 19 | ; See the PHP docs for more specific information. 20 | ; http://php.net/configuration.file 21 | 22 | ; The syntax of the file is extremely simple. Whitespace and lines 23 | ; beginning with a semicolon are silently ignored (as you probably guessed). 24 | ; Section headers (e.g. [Foo]) are also silently ignored, even though 25 | ; they might mean something in the future. 26 | 27 | ; Directives following the section heading [PATH=/www/mysite] only 28 | ; apply to PHP files in the /www/mysite directory. Directives 29 | ; following the section heading [HOST=www.example.com] only apply to 30 | ; PHP files served from www.example.com. Directives set in these 31 | ; special sections cannot be overridden by user-defined INI files or 32 | ; at runtime. Currently, [PATH=] and [HOST=] sections only work under 33 | ; CGI/FastCGI. 34 | ; http://php.net/ini.sections 35 | 36 | ; Directives are specified using the following syntax: 37 | ; directive = value 38 | ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. 39 | ; Directives are variables used to configure PHP or PHP extensions. 40 | ; There is no name validation. If PHP can't find an expected 41 | ; directive because it is not set or is mistyped, a default value will be used. 42 | 43 | ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one 44 | ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression 45 | ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a 46 | ; previously set variable or directive (e.g. ${foo}) 47 | 48 | ; Expressions in the INI file are limited to bitwise operators and parentheses: 49 | ; | bitwise OR 50 | ; ^ bitwise XOR 51 | ; & bitwise AND 52 | ; ~ bitwise NOT 53 | ; ! boolean NOT 54 | 55 | ; Boolean flags can be turned on using the values 1, On, True or Yes. 56 | ; They can be turned off using the values 0, Off, False or No. 57 | 58 | ; An empty string can be denoted by simply not writing anything after the equal 59 | ; sign, or by using the None keyword: 60 | 61 | ; foo = ; sets foo to an empty string 62 | ; foo = None ; sets foo to an empty string 63 | ; foo = "None" ; sets foo to the string 'None' 64 | 65 | ; If you use constants in your value, and these constants belong to a 66 | ; dynamically loaded extension (either a PHP extension or a Zend extension), 67 | ; you may only use these constants *after* the line that loads the extension. 68 | 69 | ;;;;;;;;;;;;;;;;;;; 70 | ; About this file ; 71 | ;;;;;;;;;;;;;;;;;;; 72 | ; PHP comes packaged with two INI files. One that is recommended to be used 73 | ; in production environments and one that is recommended to be used in 74 | ; development environments. 75 | 76 | ; php.ini-production contains settings which hold security, performance and 77 | ; best practices at its core. But please be aware, these settings may break 78 | ; compatibility with older or less security conscience applications. We 79 | ; recommending using the production ini in production and testing environments. 80 | 81 | ; php.ini-development is very similar to its production variant, except it's 82 | ; much more verbose when it comes to errors. We recommending using the 83 | ; development version only in development environments as errors shown to 84 | ; application users can inadvertently leak otherwise secure information. 85 | 86 | ; This is php.ini-production INI file. 87 | 88 | ;;;;;;;;;;;;;;;;;;; 89 | ; Quick Reference ; 90 | ;;;;;;;;;;;;;;;;;;; 91 | ; The following are all the settings which are different in either the production 92 | ; or development versions of the INIs with respect to PHP's default behavior. 93 | ; Please see the actual settings later in the document for more details as to why 94 | ; we recommend these changes in PHP's behavior. 95 | 96 | ; display_errors 97 | ; Default Value: On 98 | ; Development Value: On 99 | ; Production Value: Off 100 | 101 | ; display_startup_errors 102 | ; Default Value: Off 103 | ; Development Value: On 104 | ; Production Value: Off 105 | 106 | ; error_reporting 107 | ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED 108 | ; Development Value: E_ALL 109 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT 110 | 111 | ; html_errors 112 | ; Default Value: On 113 | ; Development Value: On 114 | ; Production value: On 115 | 116 | ; log_errors 117 | ; Default Value: Off 118 | ; Development Value: On 119 | ; Production Value: On 120 | 121 | ; max_input_time 122 | ; Default Value: -1 (Unlimited) 123 | ; Development Value: 60 (60 seconds) 124 | ; Production Value: 60 (60 seconds) 125 | 126 | ; output_buffering 127 | ; Default Value: Off 128 | ; Development Value: 4096 129 | ; Production Value: 4096 130 | 131 | ; register_argc_argv 132 | ; Default Value: On 133 | ; Development Value: Off 134 | ; Production Value: Off 135 | 136 | ; request_order 137 | ; Default Value: None 138 | ; Development Value: "GP" 139 | ; Production Value: "GP" 140 | 141 | ; session.bug_compat_42 142 | ; Default Value: On 143 | ; Development Value: On 144 | ; Production Value: Off 145 | 146 | ; session.bug_compat_warn 147 | ; Default Value: On 148 | ; Development Value: On 149 | ; Production Value: Off 150 | 151 | ; session.gc_divisor 152 | ; Default Value: 100 153 | ; Development Value: 1000 154 | ; Production Value: 1000 155 | 156 | ; session.hash_bits_per_character 157 | ; Default Value: 4 158 | ; Development Value: 5 159 | ; Production Value: 5 160 | 161 | ; short_open_tag 162 | ; Default Value: On 163 | ; Development Value: Off 164 | ; Production Value: Off 165 | 166 | ; track_errors 167 | ; Default Value: Off 168 | ; Development Value: On 169 | ; Production Value: Off 170 | 171 | ; url_rewriter.tags 172 | ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" 173 | ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 174 | ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 175 | 176 | ; variables_order 177 | ; Default Value: "EGPCS" 178 | ; Development Value: "GPCS" 179 | ; Production Value: "GPCS" 180 | 181 | ;;;;;;;;;;;;;;;;;;;; 182 | ; php.ini Options ; 183 | ;;;;;;;;;;;;;;;;;;;; 184 | ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" 185 | ;user_ini.filename = ".user.ini" 186 | 187 | ; To disable this feature set this option to empty value 188 | ;user_ini.filename = 189 | 190 | ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) 191 | ;user_ini.cache_ttl = 300 192 | 193 | ;;;;;;;;;;;;;;;;;;;; 194 | ; Language Options ; 195 | ;;;;;;;;;;;;;;;;;;;; 196 | 197 | ; Enable the PHP scripting language engine under Apache. 198 | ; http://php.net/engine 199 | engine = On 200 | 201 | ; This directive determines whether or not PHP will recognize code between 202 | ; tags as PHP source which should be processed as such. It is 203 | ; generally recommended that should be used and that this feature 204 | ; should be disabled, as enabling it may result in issues when generating XML 205 | ; documents, however this remains supported for backward compatibility reasons. 206 | ; Note that this directive does not control the tags. 215 | ; http://php.net/asp-tags 216 | asp_tags = Off 217 | 218 | ; The number of significant digits displayed in floating point numbers. 219 | ; http://php.net/precision 220 | precision = 14 221 | 222 | ; Output buffering is a mechanism for controlling how much output data 223 | ; (excluding headers and cookies) PHP should keep internally before pushing that 224 | ; data to the client. If your application's output exceeds this setting, PHP 225 | ; will send that data in chunks of roughly the size you specify. 226 | ; Turning on this setting and managing its maximum buffer size can yield some 227 | ; interesting side-effects depending on your application and web server. 228 | ; You may be able to send headers and cookies after you've already sent output 229 | ; through print or echo. You also may see performance benefits if your server is 230 | ; emitting less packets due to buffered output versus PHP streaming the output 231 | ; as it gets it. On production servers, 4096 bytes is a good setting for performance 232 | ; reasons. 233 | ; Note: Output buffering can also be controlled via Output Buffering Control 234 | ; functions. 235 | ; Possible Values: 236 | ; On = Enabled and buffer is unlimited. (Use with caution) 237 | ; Off = Disabled 238 | ; Integer = Enables the buffer and sets its maximum size in bytes. 239 | ; Note: This directive is hardcoded to Off for the CLI SAPI 240 | ; Default Value: Off 241 | ; Development Value: 4096 242 | ; Production Value: 4096 243 | ; http://php.net/output-buffering 244 | output_buffering = 4096 245 | 246 | ; You can redirect all of the output of your scripts to a function. For 247 | ; example, if you set output_handler to "mb_output_handler", character 248 | ; encoding will be transparently converted to the specified encoding. 249 | ; Setting any output handler automatically turns on output buffering. 250 | ; Note: People who wrote portable scripts should not depend on this ini 251 | ; directive. Instead, explicitly set the output handler using ob_start(). 252 | ; Using this ini directive may cause problems unless you know what script 253 | ; is doing. 254 | ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" 255 | ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". 256 | ; Note: output_handler must be empty if this is set 'On' !!!! 257 | ; Instead you must use zlib.output_handler. 258 | ; http://php.net/output-handler 259 | ;output_handler = 260 | 261 | ; Transparent output compression using the zlib library 262 | ; Valid values for this option are 'off', 'on', or a specific buffer size 263 | ; to be used for compression (default is 4KB) 264 | ; Note: Resulting chunk size may vary due to nature of compression. PHP 265 | ; outputs chunks that are few hundreds bytes each as a result of 266 | ; compression. If you prefer a larger chunk size for better 267 | ; performance, enable output_buffering in addition. 268 | ; Note: You need to use zlib.output_handler instead of the standard 269 | ; output_handler, or otherwise the output will be corrupted. 270 | ; http://php.net/zlib.output-compression 271 | zlib.output_compression = Off 272 | 273 | ; http://php.net/zlib.output-compression-level 274 | ;zlib.output_compression_level = -1 275 | 276 | ; You cannot specify additional output handlers if zlib.output_compression 277 | ; is activated here. This setting does the same as output_handler but in 278 | ; a different order. 279 | ; http://php.net/zlib.output-handler 280 | ;zlib.output_handler = 281 | 282 | ; Implicit flush tells PHP to tell the output layer to flush itself 283 | ; automatically after every output block. This is equivalent to calling the 284 | ; PHP function flush() after each and every call to print() or echo() and each 285 | ; and every HTML block. Turning this option on has serious performance 286 | ; implications and is generally recommended for debugging purposes only. 287 | ; http://php.net/implicit-flush 288 | ; Note: This directive is hardcoded to On for the CLI SAPI 289 | implicit_flush = Off 290 | 291 | ; The unserialize callback function will be called (with the undefined class' 292 | ; name as parameter), if the unserializer finds an undefined class 293 | ; which should be instantiated. A warning appears if the specified function is 294 | ; not defined, or if the function doesn't include/implement the missing class. 295 | ; So only set this entry, if you really want to implement such a 296 | ; callback-function. 297 | unserialize_callback_func = 298 | 299 | ; When floats & doubles are serialized store serialize_precision significant 300 | ; digits after the floating point. The default value ensures that when floats 301 | ; are decoded with unserialize, the data will remain the same. 302 | serialize_precision = 17 303 | 304 | ; open_basedir, if set, limits all file operations to the defined directory 305 | ; and below. This directive makes most sense if used in a per-directory 306 | ; or per-virtualhost web server configuration file. This directive is 307 | ; *NOT* affected by whether Safe Mode is turned On or Off. 308 | ; http://php.net/open-basedir 309 | ;open_basedir = 310 | 311 | ; This directive allows you to disable certain functions for security reasons. 312 | ; It receives a comma-delimited list of function names. This directive is 313 | ; *NOT* affected by whether Safe Mode is turned On or Off. 314 | ; http://php.net/disable-functions 315 | disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority, 316 | 317 | ; This directive allows you to disable certain classes for security reasons. 318 | ; It receives a comma-delimited list of class names. This directive is 319 | ; *NOT* affected by whether Safe Mode is turned On or Off. 320 | ; http://php.net/disable-classes 321 | disable_classes = 322 | 323 | ; Colors for Syntax Highlighting mode. Anything that's acceptable in 324 | ; would work. 325 | ; http://php.net/syntax-highlighting 326 | ;highlight.string = #DD0000 327 | ;highlight.comment = #FF9900 328 | ;highlight.keyword = #007700 329 | ;highlight.default = #0000BB 330 | ;highlight.html = #000000 331 | 332 | ; If enabled, the request will be allowed to complete even if the user aborts 333 | ; the request. Consider enabling it if executing long requests, which may end up 334 | ; being interrupted by the user or a browser timing out. PHP's default behavior 335 | ; is to disable this feature. 336 | ; http://php.net/ignore-user-abort 337 | ;ignore_user_abort = On 338 | 339 | ; Determines the size of the realpath cache to be used by PHP. This value should 340 | ; be increased on systems where PHP opens many files to reflect the quantity of 341 | ; the file operations performed. 342 | ; http://php.net/realpath-cache-size 343 | ;realpath_cache_size = 16k 344 | 345 | ; Duration of time, in seconds for which to cache realpath information for a given 346 | ; file or directory. For systems with rarely changing files, consider increasing this 347 | ; value. 348 | ; http://php.net/realpath-cache-ttl 349 | ;realpath_cache_ttl = 120 350 | 351 | ; Enables or disables the circular reference collector. 352 | ; http://php.net/zend.enable-gc 353 | zend.enable_gc = On 354 | 355 | ; If enabled, scripts may be written in encodings that are incompatible with 356 | ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such 357 | ; encodings. To use this feature, mbstring extension must be enabled. 358 | ; Default: Off 359 | ;zend.multibyte = Off 360 | 361 | ; Allows to set the default encoding for the scripts. This value will be used 362 | ; unless "declare(encoding=...)" directive appears at the top of the script. 363 | ; Only affects if zend.multibyte is set. 364 | ; Default: "" 365 | ;zend.script_encoding = 366 | 367 | ;;;;;;;;;;;;;;;;; 368 | ; Miscellaneous ; 369 | ;;;;;;;;;;;;;;;;; 370 | 371 | ; Decides whether PHP may expose the fact that it is installed on the server 372 | ; (e.g. by adding its signature to the Web server header). It is no security 373 | ; threat in any way, but it makes it possible to determine whether you use PHP 374 | ; on your server or not. 375 | ; http://php.net/expose-php 376 | expose_php = On 377 | 378 | ;;;;;;;;;;;;;;;;;;; 379 | ; Resource Limits ; 380 | ;;;;;;;;;;;;;;;;;;; 381 | 382 | ; Maximum execution time of each script, in seconds 383 | ; http://php.net/max-execution-time 384 | ; Note: This directive is hardcoded to 0 for the CLI SAPI 385 | max_execution_time = 30 386 | 387 | ; Maximum amount of time each script may spend parsing request data. It's a good 388 | ; idea to limit this time on productions servers in order to eliminate unexpectedly 389 | ; long running scripts. 390 | ; Note: This directive is hardcoded to -1 for the CLI SAPI 391 | ; Default Value: -1 (Unlimited) 392 | ; Development Value: 60 (60 seconds) 393 | ; Production Value: 60 (60 seconds) 394 | ; http://php.net/max-input-time 395 | max_input_time = 60 396 | 397 | ; Maximum input variable nesting level 398 | ; http://php.net/max-input-nesting-level 399 | ;max_input_nesting_level = 64 400 | 401 | ; How many GET/POST/COOKIE input variables may be accepted 402 | ; max_input_vars = 1000 403 | 404 | ; Maximum amount of memory a script may consume (128MB) 405 | ; http://php.net/memory-limit 406 | memory_limit = 128M 407 | 408 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 409 | ; Error handling and logging ; 410 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 411 | 412 | ; This directive informs PHP of which errors, warnings and notices you would like 413 | ; it to take action for. The recommended way of setting values for this 414 | ; directive is through the use of the error level constants and bitwise 415 | ; operators. The error level constants are below here for convenience as well as 416 | ; some common settings and their meanings. 417 | ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT 418 | ; those related to E_NOTICE and E_STRICT, which together cover best practices and 419 | ; recommended coding standards in PHP. For performance reasons, this is the 420 | ; recommend error reporting setting. Your production server shouldn't be wasting 421 | ; resources complaining about best practices and coding standards. That's what 422 | ; development servers and development settings are for. 423 | ; Note: The php.ini-development file has this setting as E_ALL. This 424 | ; means it pretty much reports everything which is exactly what you want during 425 | ; development and early testing. 426 | ; 427 | ; Error Level Constants: 428 | ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) 429 | ; E_ERROR - fatal run-time errors 430 | ; E_RECOVERABLE_ERROR - almost fatal run-time errors 431 | ; E_WARNING - run-time warnings (non-fatal errors) 432 | ; E_PARSE - compile-time parse errors 433 | ; E_NOTICE - run-time notices (these are warnings which often result 434 | ; from a bug in your code, but it's possible that it was 435 | ; intentional (e.g., using an uninitialized variable and 436 | ; relying on the fact it's automatically initialized to an 437 | ; empty string) 438 | ; E_STRICT - run-time notices, enable to have PHP suggest changes 439 | ; to your code which will ensure the best interoperability 440 | ; and forward compatibility of your code 441 | ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup 442 | ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's 443 | ; initial startup 444 | ; E_COMPILE_ERROR - fatal compile-time errors 445 | ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) 446 | ; E_USER_ERROR - user-generated error message 447 | ; E_USER_WARNING - user-generated warning message 448 | ; E_USER_NOTICE - user-generated notice message 449 | ; E_DEPRECATED - warn about code that will not work in future versions 450 | ; of PHP 451 | ; E_USER_DEPRECATED - user-generated deprecation warnings 452 | ; 453 | ; Common Values: 454 | ; E_ALL (Show all errors, warnings and notices including coding standards.) 455 | ; E_ALL & ~E_NOTICE (Show all errors, except for notices) 456 | ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) 457 | ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) 458 | ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED 459 | ; Development Value: E_ALL 460 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT 461 | ; http://php.net/error-reporting 462 | error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT 463 | 464 | ; This directive controls whether or not and where PHP will output errors, 465 | ; notices and warnings too. Error output is very useful during development, but 466 | ; it could be very dangerous in production environments. Depending on the code 467 | ; which is triggering the error, sensitive information could potentially leak 468 | ; out of your application such as database usernames and passwords or worse. 469 | ; It's recommended that errors be logged on production servers rather than 470 | ; having the errors sent to STDOUT. 471 | ; Possible Values: 472 | ; Off = Do not display any errors 473 | ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) 474 | ; On or stdout = Display errors to STDOUT 475 | ; Default Value: On 476 | ; Development Value: On 477 | ; Production Value: Off 478 | ; http://php.net/display-errors 479 | display_errors = Off 480 | 481 | ; The display of errors which occur during PHP's startup sequence are handled 482 | ; separately from display_errors. PHP's default behavior is to suppress those 483 | ; errors from clients. Turning the display of startup errors on can be useful in 484 | ; debugging configuration problems. But, it's strongly recommended that you 485 | ; leave this setting off on production servers. 486 | ; Default Value: Off 487 | ; Development Value: On 488 | ; Production Value: Off 489 | ; http://php.net/display-startup-errors 490 | display_startup_errors = Off 491 | 492 | ; Besides displaying errors, PHP can also log errors to locations such as a 493 | ; server-specific log, STDERR, or a location specified by the error_log 494 | ; directive found below. While errors should not be displayed on productions 495 | ; servers they should still be monitored and logging is a great way to do that. 496 | ; Default Value: Off 497 | ; Development Value: On 498 | ; Production Value: On 499 | ; http://php.net/log-errors 500 | log_errors = On 501 | 502 | ; Set maximum length of log_errors. In error_log information about the source is 503 | ; added. The default is 1024 and 0 allows to not apply any maximum length at all. 504 | ; http://php.net/log-errors-max-len 505 | log_errors_max_len = 1024 506 | 507 | ; Do not log repeated messages. Repeated errors must occur in same file on same 508 | ; line unless ignore_repeated_source is set true. 509 | ; http://php.net/ignore-repeated-errors 510 | ignore_repeated_errors = Off 511 | 512 | ; Ignore source of message when ignoring repeated messages. When this setting 513 | ; is On you will not log errors with repeated messages from different files or 514 | ; source lines. 515 | ; http://php.net/ignore-repeated-source 516 | ignore_repeated_source = Off 517 | 518 | ; If this parameter is set to Off, then memory leaks will not be shown (on 519 | ; stdout or in the log). This has only effect in a debug compile, and if 520 | ; error reporting includes E_WARNING in the allowed list 521 | ; http://php.net/report-memleaks 522 | report_memleaks = On 523 | 524 | ; This setting is on by default. 525 | ;report_zend_debug = 0 526 | 527 | ; Store the last error/warning message in $php_errormsg (boolean). Setting this value 528 | ; to On can assist in debugging and is appropriate for development servers. It should 529 | ; however be disabled on production servers. 530 | ; Default Value: Off 531 | ; Development Value: On 532 | ; Production Value: Off 533 | ; http://php.net/track-errors 534 | track_errors = Off 535 | 536 | ; Turn off normal error reporting and emit XML-RPC error XML 537 | ; http://php.net/xmlrpc-errors 538 | ;xmlrpc_errors = 0 539 | 540 | ; An XML-RPC faultCode 541 | ;xmlrpc_error_number = 0 542 | 543 | ; When PHP displays or logs an error, it has the capability of formatting the 544 | ; error message as HTML for easier reading. This directive controls whether 545 | ; the error message is formatted as HTML or not. 546 | ; Note: This directive is hardcoded to Off for the CLI SAPI 547 | ; Default Value: On 548 | ; Development Value: On 549 | ; Production value: On 550 | ; http://php.net/html-errors 551 | html_errors = On 552 | 553 | ; If html_errors is set to On *and* docref_root is not empty, then PHP 554 | ; produces clickable error messages that direct to a page describing the error 555 | ; or function causing the error in detail. 556 | ; You can download a copy of the PHP manual from http://php.net/docs 557 | ; and change docref_root to the base URL of your local copy including the 558 | ; leading '/'. You must also specify the file extension being used including 559 | ; the dot. PHP's default behavior is to leave these settings empty, in which 560 | ; case no links to documentation are generated. 561 | ; Note: Never use this feature for production boxes. 562 | ; http://php.net/docref-root 563 | ; Examples 564 | ;docref_root = "/phpmanual/" 565 | 566 | ; http://php.net/docref-ext 567 | ;docref_ext = .html 568 | 569 | ; String to output before an error message. PHP's default behavior is to leave 570 | ; this setting blank. 571 | ; http://php.net/error-prepend-string 572 | ; Example: 573 | ;error_prepend_string = "" 574 | 575 | ; String to output after an error message. PHP's default behavior is to leave 576 | ; this setting blank. 577 | ; http://php.net/error-append-string 578 | ; Example: 579 | ;error_append_string = "" 580 | 581 | ; Log errors to specified file. PHP's default behavior is to leave this value 582 | ; empty. 583 | ; http://php.net/error-log 584 | ; Example: 585 | ;error_log = php_errors.log 586 | ; Log errors to syslog (Event Log on NT, not valid in Windows 95). 587 | ;error_log = syslog 588 | 589 | ;windows.show_crt_warning 590 | ; Default value: 0 591 | ; Development value: 0 592 | ; Production value: 0 593 | 594 | ;;;;;;;;;;;;;;;;; 595 | ; Data Handling ; 596 | ;;;;;;;;;;;;;;;;; 597 | 598 | ; The separator used in PHP generated URLs to separate arguments. 599 | ; PHP's default setting is "&". 600 | ; http://php.net/arg-separator.output 601 | ; Example: 602 | ;arg_separator.output = "&" 603 | 604 | ; List of separator(s) used by PHP to parse input URLs into variables. 605 | ; PHP's default setting is "&". 606 | ; NOTE: Every character in this directive is considered as separator! 607 | ; http://php.net/arg-separator.input 608 | ; Example: 609 | ;arg_separator.input = ";&" 610 | 611 | ; This directive determines which super global arrays are registered when PHP 612 | ; starts up. G,P,C,E & S are abbreviations for the following respective super 613 | ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty 614 | ; paid for the registration of these arrays and because ENV is not as commonly 615 | ; used as the others, ENV is not recommended on productions servers. You 616 | ; can still get access to the environment variables through getenv() should you 617 | ; need to. 618 | ; Default Value: "EGPCS" 619 | ; Development Value: "GPCS" 620 | ; Production Value: "GPCS"; 621 | ; http://php.net/variables-order 622 | variables_order = "GPCS" 623 | 624 | ; This directive determines which super global data (G,P,C,E & S) should 625 | ; be registered into the super global array REQUEST. If so, it also determines 626 | ; the order in which that data is registered. The values for this directive are 627 | ; specified in the same manner as the variables_order directive, EXCEPT one. 628 | ; Leaving this value empty will cause PHP to use the value set in the 629 | ; variables_order directive. It does not mean it will leave the super globals 630 | ; array REQUEST empty. 631 | ; Default Value: None 632 | ; Development Value: "GP" 633 | ; Production Value: "GP" 634 | ; http://php.net/request-order 635 | request_order = "GP" 636 | 637 | ; This directive determines whether PHP registers $argv & $argc each time it 638 | ; runs. $argv contains an array of all the arguments passed to PHP when a script 639 | ; is invoked. $argc contains an integer representing the number of arguments 640 | ; that were passed when the script was invoked. These arrays are extremely 641 | ; useful when running scripts from the command line. When this directive is 642 | ; enabled, registering these variables consumes CPU cycles and memory each time 643 | ; a script is executed. For performance reasons, this feature should be disabled 644 | ; on production servers. 645 | ; Note: This directive is hardcoded to On for the CLI SAPI 646 | ; Default Value: On 647 | ; Development Value: Off 648 | ; Production Value: Off 649 | ; http://php.net/register-argc-argv 650 | register_argc_argv = Off 651 | 652 | ; When enabled, the ENV, REQUEST and SERVER variables are created when they're 653 | ; first used (Just In Time) instead of when the script starts. If these 654 | ; variables are not used within a script, having this directive on will result 655 | ; in a performance gain. The PHP directive register_argc_argv must be disabled 656 | ; for this directive to have any affect. 657 | ; http://php.net/auto-globals-jit 658 | auto_globals_jit = On 659 | 660 | ; Whether PHP will read the POST data. 661 | ; This option is enabled by default. 662 | ; Most likely, you won't want to disable this option globally. It causes $_POST 663 | ; and $_FILES to always be empty; the only way you will be able to read the 664 | ; POST data will be through the php://input stream wrapper. This can be useful 665 | ; to proxy requests or to process the POST data in a memory efficient fashion. 666 | ; http://php.net/enable-post-data-reading 667 | ;enable_post_data_reading = Off 668 | 669 | ; Maximum size of POST data that PHP will accept. 670 | ; Its value may be 0 to disable the limit. It is ignored if POST data reading 671 | ; is disabled through enable_post_data_reading. 672 | ; http://php.net/post-max-size 673 | post_max_size = 8M 674 | 675 | ; Automatically add files before PHP document. 676 | ; http://php.net/auto-prepend-file 677 | auto_prepend_file = 678 | 679 | ; Automatically add files after PHP document. 680 | ; http://php.net/auto-append-file 681 | auto_append_file = 682 | 683 | ; By default, PHP will output a character encoding using 684 | ; the Content-type: header. To disable sending of the charset, simply 685 | ; set it to be empty. 686 | ; 687 | ; PHP's built-in default is text/html 688 | ; http://php.net/default-mimetype 689 | default_mimetype = "text/html" 690 | 691 | ; PHP's default character set is set to empty. 692 | ; http://php.net/default-charset 693 | ;default_charset = "UTF-8" 694 | 695 | ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is 696 | ; to disable this feature. If post reading is disabled through 697 | ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated. 698 | ; http://php.net/always-populate-raw-post-data 699 | ;always_populate_raw_post_data = On 700 | 701 | ;;;;;;;;;;;;;;;;;;;;;;;;; 702 | ; Paths and Directories ; 703 | ;;;;;;;;;;;;;;;;;;;;;;;;; 704 | 705 | ; UNIX: "/path1:/path2" 706 | ;include_path = ".:/usr/share/php" 707 | ; 708 | ; Windows: "\path1;\path2" 709 | ;include_path = ".;c:\php\includes" 710 | ; 711 | ; PHP's default setting for include_path is ".;/path/to/php/pear" 712 | ; http://php.net/include-path 713 | 714 | ; The root of the PHP pages, used only if nonempty. 715 | ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root 716 | ; if you are running php as a CGI under any web server (other than IIS) 717 | ; see documentation for security issues. The alternate is to use the 718 | ; cgi.force_redirect configuration below 719 | ; http://php.net/doc-root 720 | doc_root = 721 | 722 | ; The directory under which PHP opens the script using /~username used only 723 | ; if nonempty. 724 | ; http://php.net/user-dir 725 | user_dir = 726 | 727 | ; Directory in which the loadable extensions (modules) reside. 728 | ; http://php.net/extension-dir 729 | ; extension_dir = "./" 730 | ; On windows: 731 | ; extension_dir = "ext" 732 | 733 | ; Directory where the temporary files should be placed. 734 | ; Defaults to the system default (see sys_get_temp_dir) 735 | ; sys_temp_dir = "/tmp" 736 | 737 | ; Whether or not to enable the dl() function. The dl() function does NOT work 738 | ; properly in multithreaded servers, such as IIS or Zeus, and is automatically 739 | ; disabled on them. 740 | ; http://php.net/enable-dl 741 | enable_dl = Off 742 | 743 | ; cgi.force_redirect is necessary to provide security running PHP as a CGI under 744 | ; most web servers. Left undefined, PHP turns this on by default. You can 745 | ; turn it off here AT YOUR OWN RISK 746 | ; **You CAN safely turn this off for IIS, in fact, you MUST.** 747 | ; http://php.net/cgi.force-redirect 748 | ;cgi.force_redirect = 1 749 | 750 | ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with 751 | ; every request. PHP's default behavior is to disable this feature. 752 | ;cgi.nph = 1 753 | 754 | ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 755 | ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP 756 | ; will look for to know it is OK to continue execution. Setting this variable MAY 757 | ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. 758 | ; http://php.net/cgi.redirect-status-env 759 | ;cgi.redirect_status_env = 760 | 761 | ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's 762 | ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok 763 | ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting 764 | ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting 765 | ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts 766 | ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. 767 | ; http://php.net/cgi.fix-pathinfo 768 | ;cgi.fix_pathinfo=1 769 | 770 | ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate 771 | ; security tokens of the calling client. This allows IIS to define the 772 | ; security context that the request runs under. mod_fastcgi under Apache 773 | ; does not currently support this feature (03/17/2002) 774 | ; Set to 1 if running under IIS. Default is zero. 775 | ; http://php.net/fastcgi.impersonate 776 | ;fastcgi.impersonate = 1 777 | 778 | ; Disable logging through FastCGI connection. PHP's default behavior is to enable 779 | ; this feature. 780 | ;fastcgi.logging = 0 781 | 782 | ; cgi.rfc2616_headers configuration option tells PHP what type of headers to 783 | ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that 784 | ; is supported by Apache. When this option is set to 1 PHP will send 785 | ; RFC2616 compliant header. 786 | ; Default is zero. 787 | ; http://php.net/cgi.rfc2616-headers 788 | ;cgi.rfc2616_headers = 0 789 | 790 | ;;;;;;;;;;;;;;;; 791 | ; File Uploads ; 792 | ;;;;;;;;;;;;;;;; 793 | 794 | ; Whether to allow HTTP file uploads. 795 | ; http://php.net/file-uploads 796 | file_uploads = On 797 | 798 | ; Temporary directory for HTTP uploaded files (will use system default if not 799 | ; specified). 800 | ; http://php.net/upload-tmp-dir 801 | ;upload_tmp_dir = 802 | 803 | ; Maximum allowed size for uploaded files. 804 | ; http://php.net/upload-max-filesize 805 | upload_max_filesize = 2M 806 | 807 | ; Maximum number of files that can be uploaded via a single request 808 | max_file_uploads = 20 809 | 810 | ;;;;;;;;;;;;;;;;;; 811 | ; Fopen wrappers ; 812 | ;;;;;;;;;;;;;;;;;; 813 | 814 | ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. 815 | ; http://php.net/allow-url-fopen 816 | allow_url_fopen = On 817 | 818 | ; Whether to allow include/require to open URLs (like http:// or ftp://) as files. 819 | ; http://php.net/allow-url-include 820 | allow_url_include = Off 821 | 822 | ; Define the anonymous ftp password (your email address). PHP's default setting 823 | ; for this is empty. 824 | ; http://php.net/from 825 | ;from="john@doe.com" 826 | 827 | ; Define the User-Agent string. PHP's default setting for this is empty. 828 | ; http://php.net/user-agent 829 | ;user_agent="PHP" 830 | 831 | ; Default timeout for socket based streams (seconds) 832 | ; http://php.net/default-socket-timeout 833 | default_socket_timeout = 60 834 | 835 | ; If your scripts have to deal with files from Macintosh systems, 836 | ; or you are running on a Mac and need to deal with files from 837 | ; unix or win32 systems, setting this flag will cause PHP to 838 | ; automatically detect the EOL character in those files so that 839 | ; fgets() and file() will work regardless of the source of the file. 840 | ; http://php.net/auto-detect-line-endings 841 | ;auto_detect_line_endings = Off 842 | 843 | ;;;;;;;;;;;;;;;;;;;;;; 844 | ; Dynamic Extensions ; 845 | ;;;;;;;;;;;;;;;;;;;;;; 846 | 847 | ; If you wish to have an extension loaded automatically, use the following 848 | ; syntax: 849 | ; 850 | ; extension=modulename.extension 851 | ; 852 | ; For example, on Windows: 853 | ; 854 | ; extension=msql.dll 855 | ; 856 | ; ... or under UNIX: 857 | ; 858 | ; extension=msql.so 859 | ; 860 | ; ... or with a path: 861 | ; 862 | ; extension=/path/to/extension/msql.so 863 | ; 864 | ; If you only provide the name of the extension, PHP will look for it in its 865 | ; default extension directory. 866 | ; 867 | 868 | ;;;;;;;;;;;;;;;;;;; 869 | ; Module Settings ; 870 | ;;;;;;;;;;;;;;;;;;; 871 | 872 | [CLI Server] 873 | ; Whether the CLI web server uses ANSI color coding in its terminal output. 874 | cli_server.color = On 875 | 876 | [Date] 877 | ; Defines the default timezone used by the date functions 878 | ; http://php.net/date.timezone 879 | date.timezone = "Asia/Shanghai" 880 | 881 | ; http://php.net/date.default-latitude 882 | ;date.default_latitude = 31.7667 883 | 884 | ; http://php.net/date.default-longitude 885 | ;date.default_longitude = 35.2333 886 | 887 | ; http://php.net/date.sunrise-zenith 888 | ;date.sunrise_zenith = 90.583333 889 | 890 | ; http://php.net/date.sunset-zenith 891 | ;date.sunset_zenith = 90.583333 892 | 893 | [filter] 894 | ; http://php.net/filter.default 895 | ;filter.default = unsafe_raw 896 | 897 | ; http://php.net/filter.default-flags 898 | ;filter.default_flags = 899 | 900 | [iconv] 901 | ;iconv.input_encoding = ISO-8859-1 902 | ;iconv.internal_encoding = ISO-8859-1 903 | ;iconv.output_encoding = ISO-8859-1 904 | 905 | [intl] 906 | ;intl.default_locale = 907 | ; This directive allows you to produce PHP errors when some error 908 | ; happens within intl functions. The value is the level of the error produced. 909 | ; Default is 0, which does not produce any errors. 910 | ;intl.error_level = E_WARNING 911 | 912 | [sqlite] 913 | ; http://php.net/sqlite.assoc-case 914 | ;sqlite.assoc_case = 0 915 | 916 | [sqlite3] 917 | ;sqlite3.extension_dir = 918 | 919 | [Pcre] 920 | ;PCRE library backtracking limit. 921 | ; http://php.net/pcre.backtrack-limit 922 | ;pcre.backtrack_limit=100000 923 | 924 | ;PCRE library recursion limit. 925 | ;Please note that if you set this value to a high number you may consume all 926 | ;the available process stack and eventually crash PHP (due to reaching the 927 | ;stack size limit imposed by the Operating System). 928 | ; http://php.net/pcre.recursion-limit 929 | ;pcre.recursion_limit=100000 930 | 931 | [Pdo] 932 | ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" 933 | ; http://php.net/pdo-odbc.connection-pooling 934 | ;pdo_odbc.connection_pooling=strict 935 | 936 | ;pdo_odbc.db2_instance_name 937 | 938 | [Pdo_mysql] 939 | ; If mysqlnd is used: Number of cache slots for the internal result set cache 940 | ; http://php.net/pdo_mysql.cache_size 941 | pdo_mysql.cache_size = 2000 942 | 943 | ; Default socket name for local MySQL connects. If empty, uses the built-in 944 | ; MySQL defaults. 945 | ; http://php.net/pdo_mysql.default-socket 946 | pdo_mysql.default_socket= 947 | 948 | [Phar] 949 | ; http://php.net/phar.readonly 950 | ;phar.readonly = On 951 | 952 | ; http://php.net/phar.require-hash 953 | ;phar.require_hash = On 954 | 955 | ;phar.cache_list = 956 | 957 | [mail function] 958 | ; For Win32 only. 959 | ; http://php.net/smtp 960 | SMTP = localhost 961 | ; http://php.net/smtp-port 962 | smtp_port = 25 963 | 964 | ; For Win32 only. 965 | ; http://php.net/sendmail-from 966 | ;sendmail_from = me@example.com 967 | 968 | ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). 969 | ; http://php.net/sendmail-path 970 | ;sendmail_path = 971 | 972 | ; Force the addition of the specified parameters to be passed as extra parameters 973 | ; to the sendmail binary. These parameters will always replace the value of 974 | ; the 5th parameter to mail(), even in safe mode. 975 | ;mail.force_extra_parameters = 976 | 977 | ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename 978 | mail.add_x_header = On 979 | 980 | ; The path to a log file that will log all mail() calls. Log entries include 981 | ; the full path of the script, line number, To address and headers. 982 | ;mail.log = 983 | ; Log mail to syslog (Event Log on NT, not valid in Windows 95). 984 | ;mail.log = syslog 985 | 986 | [SQL] 987 | ; http://php.net/sql.safe-mode 988 | sql.safe_mode = Off 989 | 990 | [ODBC] 991 | ; http://php.net/odbc.default-db 992 | ;odbc.default_db = Not yet implemented 993 | 994 | ; http://php.net/odbc.default-user 995 | ;odbc.default_user = Not yet implemented 996 | 997 | ; http://php.net/odbc.default-pw 998 | ;odbc.default_pw = Not yet implemented 999 | 1000 | ; Controls the ODBC cursor model. 1001 | ; Default: SQL_CURSOR_STATIC (default). 1002 | ;odbc.default_cursortype 1003 | 1004 | ; Allow or prevent persistent links. 1005 | ; http://php.net/odbc.allow-persistent 1006 | odbc.allow_persistent = On 1007 | 1008 | ; Check that a connection is still valid before reuse. 1009 | ; http://php.net/odbc.check-persistent 1010 | odbc.check_persistent = On 1011 | 1012 | ; Maximum number of persistent links. -1 means no limit. 1013 | ; http://php.net/odbc.max-persistent 1014 | odbc.max_persistent = -1 1015 | 1016 | ; Maximum number of links (persistent + non-persistent). -1 means no limit. 1017 | ; http://php.net/odbc.max-links 1018 | odbc.max_links = -1 1019 | 1020 | ; Handling of LONG fields. Returns number of bytes to variables. 0 means 1021 | ; passthru. 1022 | ; http://php.net/odbc.defaultlrl 1023 | odbc.defaultlrl = 4096 1024 | 1025 | ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. 1026 | ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation 1027 | ; of odbc.defaultlrl and odbc.defaultbinmode 1028 | ; http://php.net/odbc.defaultbinmode 1029 | odbc.defaultbinmode = 1 1030 | 1031 | ;birdstep.max_links = -1 1032 | 1033 | [Interbase] 1034 | ; Allow or prevent persistent links. 1035 | ibase.allow_persistent = 1 1036 | 1037 | ; Maximum number of persistent links. -1 means no limit. 1038 | ibase.max_persistent = -1 1039 | 1040 | ; Maximum number of links (persistent + non-persistent). -1 means no limit. 1041 | ibase.max_links = -1 1042 | 1043 | ; Default database name for ibase_connect(). 1044 | ;ibase.default_db = 1045 | 1046 | ; Default username for ibase_connect(). 1047 | ;ibase.default_user = 1048 | 1049 | ; Default password for ibase_connect(). 1050 | ;ibase.default_password = 1051 | 1052 | ; Default charset for ibase_connect(). 1053 | ;ibase.default_charset = 1054 | 1055 | ; Default timestamp format. 1056 | ibase.timestampformat = "%Y-%m-%d %H:%M:%S" 1057 | 1058 | ; Default date format. 1059 | ibase.dateformat = "%Y-%m-%d" 1060 | 1061 | ; Default time format. 1062 | ibase.timeformat = "%H:%M:%S" 1063 | 1064 | [MySQL] 1065 | ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements 1066 | ; http://php.net/mysql.allow_local_infile 1067 | mysql.allow_local_infile = On 1068 | 1069 | ; Allow or prevent persistent links. 1070 | ; http://php.net/mysql.allow-persistent 1071 | mysql.allow_persistent = On 1072 | 1073 | ; If mysqlnd is used: Number of cache slots for the internal result set cache 1074 | ; http://php.net/mysql.cache_size 1075 | mysql.cache_size = 2000 1076 | 1077 | ; Maximum number of persistent links. -1 means no limit. 1078 | ; http://php.net/mysql.max-persistent 1079 | mysql.max_persistent = -1 1080 | 1081 | ; Maximum number of links (persistent + non-persistent). -1 means no limit. 1082 | ; http://php.net/mysql.max-links 1083 | mysql.max_links = -1 1084 | 1085 | ; Default port number for mysql_connect(). If unset, mysql_connect() will use 1086 | ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the 1087 | ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look 1088 | ; at MYSQL_PORT. 1089 | ; http://php.net/mysql.default-port 1090 | mysql.default_port = 1091 | 1092 | ; Default socket name for local MySQL connects. If empty, uses the built-in 1093 | ; MySQL defaults. 1094 | ; http://php.net/mysql.default-socket 1095 | mysql.default_socket = 1096 | 1097 | ; Default host for mysql_connect() (doesn't apply in safe mode). 1098 | ; http://php.net/mysql.default-host 1099 | mysql.default_host = 1100 | 1101 | ; Default user for mysql_connect() (doesn't apply in safe mode). 1102 | ; http://php.net/mysql.default-user 1103 | mysql.default_user = 1104 | 1105 | ; Default password for mysql_connect() (doesn't apply in safe mode). 1106 | ; Note that this is generally a *bad* idea to store passwords in this file. 1107 | ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") 1108 | ; and reveal this password! And of course, any users with read access to this 1109 | ; file will be able to reveal the password as well. 1110 | ; http://php.net/mysql.default-password 1111 | mysql.default_password = 1112 | 1113 | ; Maximum time (in seconds) for connect timeout. -1 means no limit 1114 | ; http://php.net/mysql.connect-timeout 1115 | mysql.connect_timeout = 60 1116 | 1117 | ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and 1118 | ; SQL-Errors will be displayed. 1119 | ; http://php.net/mysql.trace-mode 1120 | mysql.trace_mode = Off 1121 | 1122 | [MySQLi] 1123 | 1124 | ; Maximum number of persistent links. -1 means no limit. 1125 | ; http://php.net/mysqli.max-persistent 1126 | mysqli.max_persistent = -1 1127 | 1128 | ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements 1129 | ; http://php.net/mysqli.allow_local_infile 1130 | ;mysqli.allow_local_infile = On 1131 | 1132 | ; Allow or prevent persistent links. 1133 | ; http://php.net/mysqli.allow-persistent 1134 | mysqli.allow_persistent = On 1135 | 1136 | ; Maximum number of links. -1 means no limit. 1137 | ; http://php.net/mysqli.max-links 1138 | mysqli.max_links = -1 1139 | 1140 | ; If mysqlnd is used: Number of cache slots for the internal result set cache 1141 | ; http://php.net/mysqli.cache_size 1142 | mysqli.cache_size = 2000 1143 | 1144 | ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use 1145 | ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the 1146 | ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look 1147 | ; at MYSQL_PORT. 1148 | ; http://php.net/mysqli.default-port 1149 | mysqli.default_port = 3306 1150 | 1151 | ; Default socket name for local MySQL connects. If empty, uses the built-in 1152 | ; MySQL defaults. 1153 | ; http://php.net/mysqli.default-socket 1154 | mysqli.default_socket = 1155 | 1156 | ; Default host for mysql_connect() (doesn't apply in safe mode). 1157 | ; http://php.net/mysqli.default-host 1158 | mysqli.default_host = 1159 | 1160 | ; Default user for mysql_connect() (doesn't apply in safe mode). 1161 | ; http://php.net/mysqli.default-user 1162 | mysqli.default_user = 1163 | 1164 | ; Default password for mysqli_connect() (doesn't apply in safe mode). 1165 | ; Note that this is generally a *bad* idea to store passwords in this file. 1166 | ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") 1167 | ; and reveal this password! And of course, any users with read access to this 1168 | ; file will be able to reveal the password as well. 1169 | ; http://php.net/mysqli.default-pw 1170 | mysqli.default_pw = 1171 | 1172 | ; Allow or prevent reconnect 1173 | mysqli.reconnect = Off 1174 | 1175 | [mysqlnd] 1176 | ; Enable / Disable collection of general statistics by mysqlnd which can be 1177 | ; used to tune and monitor MySQL operations. 1178 | ; http://php.net/mysqlnd.collect_statistics 1179 | mysqlnd.collect_statistics = On 1180 | 1181 | ; Enable / Disable collection of memory usage statistics by mysqlnd which can be 1182 | ; used to tune and monitor MySQL operations. 1183 | ; http://php.net/mysqlnd.collect_memory_statistics 1184 | mysqlnd.collect_memory_statistics = Off 1185 | 1186 | ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. 1187 | ; http://php.net/mysqlnd.net_cmd_buffer_size 1188 | ;mysqlnd.net_cmd_buffer_size = 2048 1189 | 1190 | ; Size of a pre-allocated buffer used for reading data sent by the server in 1191 | ; bytes. 1192 | ; http://php.net/mysqlnd.net_read_buffer_size 1193 | ;mysqlnd.net_read_buffer_size = 32768 1194 | 1195 | [OCI8] 1196 | 1197 | ; Connection: Enables privileged connections using external 1198 | ; credentials (OCI_SYSOPER, OCI_SYSDBA) 1199 | ; http://php.net/oci8.privileged-connect 1200 | ;oci8.privileged_connect = Off 1201 | 1202 | ; Connection: The maximum number of persistent OCI8 connections per 1203 | ; process. Using -1 means no limit. 1204 | ; http://php.net/oci8.max-persistent 1205 | ;oci8.max_persistent = -1 1206 | 1207 | ; Connection: The maximum number of seconds a process is allowed to 1208 | ; maintain an idle persistent connection. Using -1 means idle 1209 | ; persistent connections will be maintained forever. 1210 | ; http://php.net/oci8.persistent-timeout 1211 | ;oci8.persistent_timeout = -1 1212 | 1213 | ; Connection: The number of seconds that must pass before issuing a 1214 | ; ping during oci_pconnect() to check the connection validity. When 1215 | ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables 1216 | ; pings completely. 1217 | ; http://php.net/oci8.ping-interval 1218 | ;oci8.ping_interval = 60 1219 | 1220 | ; Connection: Set this to a user chosen connection class to be used 1221 | ; for all pooled server requests with Oracle 11g Database Resident 1222 | ; Connection Pooling (DRCP). To use DRCP, this value should be set to 1223 | ; the same string for all web servers running the same application, 1224 | ; the database pool must be configured, and the connection string must 1225 | ; specify to use a pooled server. 1226 | ;oci8.connection_class = 1227 | 1228 | ; High Availability: Using On lets PHP receive Fast Application 1229 | ; Notification (FAN) events generated when a database node fails. The 1230 | ; database must also be configured to post FAN events. 1231 | ;oci8.events = Off 1232 | 1233 | ; Tuning: This option enables statement caching, and specifies how 1234 | ; many statements to cache. Using 0 disables statement caching. 1235 | ; http://php.net/oci8.statement-cache-size 1236 | ;oci8.statement_cache_size = 20 1237 | 1238 | ; Tuning: Enables statement prefetching and sets the default number of 1239 | ; rows that will be fetched automatically after statement execution. 1240 | ; http://php.net/oci8.default-prefetch 1241 | ;oci8.default_prefetch = 100 1242 | 1243 | ; Compatibility. Using On means oci_close() will not close 1244 | ; oci_connect() and oci_new_connect() connections. 1245 | ; http://php.net/oci8.old-oci-close-semantics 1246 | ;oci8.old_oci_close_semantics = Off 1247 | 1248 | [PostgreSQL] 1249 | ; Allow or prevent persistent links. 1250 | ; http://php.net/pgsql.allow-persistent 1251 | pgsql.allow_persistent = On 1252 | 1253 | ; Detect broken persistent links always with pg_pconnect(). 1254 | ; Auto reset feature requires a little overheads. 1255 | ; http://php.net/pgsql.auto-reset-persistent 1256 | pgsql.auto_reset_persistent = Off 1257 | 1258 | ; Maximum number of persistent links. -1 means no limit. 1259 | ; http://php.net/pgsql.max-persistent 1260 | pgsql.max_persistent = -1 1261 | 1262 | ; Maximum number of links (persistent+non persistent). -1 means no limit. 1263 | ; http://php.net/pgsql.max-links 1264 | pgsql.max_links = -1 1265 | 1266 | ; Ignore PostgreSQL backends Notice message or not. 1267 | ; Notice message logging require a little overheads. 1268 | ; http://php.net/pgsql.ignore-notice 1269 | pgsql.ignore_notice = 0 1270 | 1271 | ; Log PostgreSQL backends Notice message or not. 1272 | ; Unless pgsql.ignore_notice=0, module cannot log notice message. 1273 | ; http://php.net/pgsql.log-notice 1274 | pgsql.log_notice = 0 1275 | 1276 | [Sybase-CT] 1277 | ; Allow or prevent persistent links. 1278 | ; http://php.net/sybct.allow-persistent 1279 | sybct.allow_persistent = On 1280 | 1281 | ; Maximum number of persistent links. -1 means no limit. 1282 | ; http://php.net/sybct.max-persistent 1283 | sybct.max_persistent = -1 1284 | 1285 | ; Maximum number of links (persistent + non-persistent). -1 means no limit. 1286 | ; http://php.net/sybct.max-links 1287 | sybct.max_links = -1 1288 | 1289 | ; Minimum server message severity to display. 1290 | ; http://php.net/sybct.min-server-severity 1291 | sybct.min_server_severity = 10 1292 | 1293 | ; Minimum client message severity to display. 1294 | ; http://php.net/sybct.min-client-severity 1295 | sybct.min_client_severity = 10 1296 | 1297 | ; Set per-context timeout 1298 | ; http://php.net/sybct.timeout 1299 | ;sybct.timeout= 1300 | 1301 | ;sybct.packet_size 1302 | 1303 | ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. 1304 | ; Default: one minute 1305 | ;sybct.login_timeout= 1306 | 1307 | ; The name of the host you claim to be connecting from, for display by sp_who. 1308 | ; Default: none 1309 | ;sybct.hostname= 1310 | 1311 | ; Allows you to define how often deadlocks are to be retried. -1 means "forever". 1312 | ; Default: 0 1313 | ;sybct.deadlock_retry_count= 1314 | 1315 | [bcmath] 1316 | ; Number of decimal digits for all bcmath functions. 1317 | ; http://php.net/bcmath.scale 1318 | bcmath.scale = 0 1319 | 1320 | [browscap] 1321 | ; http://php.net/browscap 1322 | ;browscap = extra/browscap.ini 1323 | 1324 | [Session] 1325 | ; Handler used to store/retrieve data. 1326 | ; http://php.net/session.save-handler 1327 | session.save_handler = files 1328 | 1329 | ; Argument passed to save_handler. In the case of files, this is the path 1330 | ; where data files are stored. Note: Windows users have to change this 1331 | ; variable in order to use PHP's session functions. 1332 | ; 1333 | ; The path can be defined as: 1334 | ; 1335 | ; session.save_path = "N;/path" 1336 | ; 1337 | ; where N is an integer. Instead of storing all the session files in 1338 | ; /path, what this will do is use subdirectories N-levels deep, and 1339 | ; store the session data in those directories. This is useful if you 1340 | ; or your OS have problems with lots of files in one directory, and is 1341 | ; a more efficient layout for servers that handle lots of sessions. 1342 | ; 1343 | ; NOTE 1: PHP will not create this directory structure automatically. 1344 | ; You can use the script in the ext/session dir for that purpose. 1345 | ; NOTE 2: See the section on garbage collection below if you choose to 1346 | ; use subdirectories for session storage 1347 | ; 1348 | ; The file storage module creates files using mode 600 by default. 1349 | ; You can change that by using 1350 | ; 1351 | ; session.save_path = "N;MODE;/path" 1352 | ; 1353 | ; where MODE is the octal representation of the mode. Note that this 1354 | ; does not overwrite the process's umask. 1355 | ; http://php.net/session.save-path 1356 | ;session.save_path = "/var/lib/php5" 1357 | 1358 | ; Whether to use strict session mode. 1359 | ; Strict session mode does not accept uninitialized session ID and regenerate 1360 | ; session ID if browser sends uninitialized session ID. Strict mode protects 1361 | ; applications from session fixation via session adoption vulnerability. It is 1362 | ; disabled by default for maximum compatibility, but enabling it is encouraged. 1363 | ; https://wiki.php.net/rfc/strict_sessions 1364 | session.use_strict_mode = 0 1365 | 1366 | ; Whether to use cookies. 1367 | ; http://php.net/session.use-cookies 1368 | session.use_cookies = 1 1369 | 1370 | ; http://php.net/session.cookie-secure 1371 | ;session.cookie_secure = 1372 | 1373 | ; This option forces PHP to fetch and use a cookie for storing and maintaining 1374 | ; the session id. We encourage this operation as it's very helpful in combating 1375 | ; session hijacking when not specifying and managing your own session id. It is 1376 | ; not the end all be all of session hijacking defense, but it's a good start. 1377 | ; http://php.net/session.use-only-cookies 1378 | session.use_only_cookies = 1 1379 | 1380 | ; Name of the session (used as cookie name). 1381 | ; http://php.net/session.name 1382 | session.name = PHPSESSID 1383 | 1384 | ; Initialize session on request startup. 1385 | ; http://php.net/session.auto-start 1386 | session.auto_start = 0 1387 | 1388 | ; Lifetime in seconds of cookie or, if 0, until browser is restarted. 1389 | ; http://php.net/session.cookie-lifetime 1390 | session.cookie_lifetime = 0 1391 | 1392 | ; The path for which the cookie is valid. 1393 | ; http://php.net/session.cookie-path 1394 | session.cookie_path = / 1395 | 1396 | ; The domain for which the cookie is valid. 1397 | ; http://php.net/session.cookie-domain 1398 | session.cookie_domain = 1399 | 1400 | ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. 1401 | ; http://php.net/session.cookie-httponly 1402 | session.cookie_httponly = 1403 | 1404 | ; Handler used to serialize data. php is the standard serializer of PHP. 1405 | ; http://php.net/session.serialize-handler 1406 | session.serialize_handler = php 1407 | 1408 | ; Defines the probability that the 'garbage collection' process is started 1409 | ; on every session initialization. The probability is calculated by using 1410 | ; gc_probability/gc_divisor. Where session.gc_probability is the numerator 1411 | ; and gc_divisor is the denominator in the equation. Setting this value to 1 1412 | ; when the session.gc_divisor value is 100 will give you approximately a 1% chance 1413 | ; the gc will run on any give request. 1414 | ; Default Value: 1 1415 | ; Development Value: 1 1416 | ; Production Value: 1 1417 | ; http://php.net/session.gc-probability 1418 | session.gc_probability = 0 1419 | 1420 | ; Defines the probability that the 'garbage collection' process is started on every 1421 | ; session initialization. The probability is calculated by using the following equation: 1422 | ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and 1423 | ; session.gc_divisor is the denominator in the equation. Setting this value to 1 1424 | ; when the session.gc_divisor value is 100 will give you approximately a 1% chance 1425 | ; the gc will run on any give request. Increasing this value to 1000 will give you 1426 | ; a 0.1% chance the gc will run on any give request. For high volume production servers, 1427 | ; this is a more efficient approach. 1428 | ; Default Value: 100 1429 | ; Development Value: 1000 1430 | ; Production Value: 1000 1431 | ; http://php.net/session.gc-divisor 1432 | session.gc_divisor = 1000 1433 | 1434 | ; After this number of seconds, stored data will be seen as 'garbage' and 1435 | ; cleaned up by the garbage collection process. 1436 | ; http://php.net/session.gc-maxlifetime 1437 | session.gc_maxlifetime = 1440 1438 | 1439 | ; NOTE: If you are using the subdirectory option for storing session files 1440 | ; (see session.save_path above), then garbage collection does *not* 1441 | ; happen automatically. You will need to do your own garbage 1442 | ; collection through a shell script, cron entry, or some other method. 1443 | ; For example, the following script would is the equivalent of 1444 | ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): 1445 | ; find /path/to/sessions -cmin +24 -type f | xargs rm 1446 | 1447 | ; PHP 4.2 and less have an undocumented feature/bug that allows you to 1448 | ; to initialize a session variable in the global scope. 1449 | ; PHP 4.3 and later will warn you, if this feature is used. 1450 | ; You can disable the feature and the warning separately. At this time, 1451 | ; the warning is only displayed, if bug_compat_42 is enabled. This feature 1452 | ; introduces some serious security problems if not handled correctly. It's 1453 | ; recommended that you do not use this feature on production servers. But you 1454 | ; should enable this on development servers and enable the warning as well. If you 1455 | ; do not enable the feature on development servers, you won't be warned when it's 1456 | ; used and debugging errors caused by this can be difficult to track down. 1457 | ; Default Value: On 1458 | ; Development Value: On 1459 | ; Production Value: Off 1460 | ; http://php.net/session.bug-compat-42 1461 | session.bug_compat_42 = Off 1462 | 1463 | ; This setting controls whether or not you are warned by PHP when initializing a 1464 | ; session value into the global space. session.bug_compat_42 must be enabled before 1465 | ; these warnings can be issued by PHP. See the directive above for more information. 1466 | ; Default Value: On 1467 | ; Development Value: On 1468 | ; Production Value: Off 1469 | ; http://php.net/session.bug-compat-warn 1470 | session.bug_compat_warn = Off 1471 | 1472 | ; Check HTTP Referer to invalidate externally stored URLs containing ids. 1473 | ; HTTP_REFERER has to contain this substring for the session to be 1474 | ; considered as valid. 1475 | ; http://php.net/session.referer-check 1476 | session.referer_check = 1477 | 1478 | ; How many bytes to read from the file. 1479 | ; http://php.net/session.entropy-length 1480 | ;session.entropy_length = 32 1481 | 1482 | ; Specified here to create the session id. 1483 | ; http://php.net/session.entropy-file 1484 | ; Defaults to /dev/urandom 1485 | ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom 1486 | ; If neither are found at compile time, the default is no entropy file. 1487 | ; On windows, setting the entropy_length setting will activate the 1488 | ; Windows random source (using the CryptoAPI) 1489 | ;session.entropy_file = /dev/urandom 1490 | 1491 | ; Set to {nocache,private,public,} to determine HTTP caching aspects 1492 | ; or leave this empty to avoid sending anti-caching headers. 1493 | ; http://php.net/session.cache-limiter 1494 | session.cache_limiter = nocache 1495 | 1496 | ; Document expires after n minutes. 1497 | ; http://php.net/session.cache-expire 1498 | session.cache_expire = 180 1499 | 1500 | ; trans sid support is disabled by default. 1501 | ; Use of trans sid may risk your users security. 1502 | ; Use this option with caution. 1503 | ; - User may send URL contains active session ID 1504 | ; to other person via. email/irc/etc. 1505 | ; - URL that contains active session ID may be stored 1506 | ; in publicly accessible computer. 1507 | ; - User may access your site with the same session ID 1508 | ; always using URL stored in browser's history or bookmarks. 1509 | ; http://php.net/session.use-trans-sid 1510 | session.use_trans_sid = 0 1511 | 1512 | ; Select a hash function for use in generating session ids. 1513 | ; Possible Values 1514 | ; 0 (MD5 128 bits) 1515 | ; 1 (SHA-1 160 bits) 1516 | ; This option may also be set to the name of any hash function supported by 1517 | ; the hash extension. A list of available hashes is returned by the hash_algos() 1518 | ; function. 1519 | ; http://php.net/session.hash-function 1520 | session.hash_function = 0 1521 | 1522 | ; Define how many bits are stored in each character when converting 1523 | ; the binary hash data to something readable. 1524 | ; Possible values: 1525 | ; 4 (4 bits: 0-9, a-f) 1526 | ; 5 (5 bits: 0-9, a-v) 1527 | ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") 1528 | ; Default Value: 4 1529 | ; Development Value: 5 1530 | ; Production Value: 5 1531 | ; http://php.net/session.hash-bits-per-character 1532 | session.hash_bits_per_character = 5 1533 | 1534 | ; The URL rewriter will look for URLs in a defined set of HTML tags. 1535 | ; form/fieldset are special; if you include them here, the rewriter will 1536 | ; add a hidden field with the info which is otherwise appended 1537 | ; to URLs. If you want XHTML conformity, remove the form entry. 1538 | ; Note that all valid entries require a "=", even if no value follows. 1539 | ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" 1540 | ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 1541 | ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" 1542 | ; http://php.net/url-rewriter.tags 1543 | url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" 1544 | 1545 | ; Enable upload progress tracking in $_SESSION 1546 | ; Default Value: On 1547 | ; Development Value: On 1548 | ; Production Value: On 1549 | ; http://php.net/session.upload-progress.enabled 1550 | ;session.upload_progress.enabled = On 1551 | 1552 | ; Cleanup the progress information as soon as all POST data has been read 1553 | ; (i.e. upload completed). 1554 | ; Default Value: On 1555 | ; Development Value: On 1556 | ; Production Value: On 1557 | ; http://php.net/session.upload-progress.cleanup 1558 | ;session.upload_progress.cleanup = On 1559 | 1560 | ; A prefix used for the upload progress key in $_SESSION 1561 | ; Default Value: "upload_progress_" 1562 | ; Development Value: "upload_progress_" 1563 | ; Production Value: "upload_progress_" 1564 | ; http://php.net/session.upload-progress.prefix 1565 | ;session.upload_progress.prefix = "upload_progress_" 1566 | 1567 | ; The index name (concatenated with the prefix) in $_SESSION 1568 | ; containing the upload progress information 1569 | ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" 1570 | ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" 1571 | ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" 1572 | ; http://php.net/session.upload-progress.name 1573 | ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" 1574 | 1575 | ; How frequently the upload progress should be updated. 1576 | ; Given either in percentages (per-file), or in bytes 1577 | ; Default Value: "1%" 1578 | ; Development Value: "1%" 1579 | ; Production Value: "1%" 1580 | ; http://php.net/session.upload-progress.freq 1581 | ;session.upload_progress.freq = "1%" 1582 | 1583 | ; The minimum delay between updates, in seconds 1584 | ; Default Value: 1 1585 | ; Development Value: 1 1586 | ; Production Value: 1 1587 | ; http://php.net/session.upload-progress.min-freq 1588 | ;session.upload_progress.min_freq = "1" 1589 | 1590 | [MSSQL] 1591 | ; Allow or prevent persistent links. 1592 | mssql.allow_persistent = On 1593 | 1594 | ; Maximum number of persistent links. -1 means no limit. 1595 | mssql.max_persistent = -1 1596 | 1597 | ; Maximum number of links (persistent+non persistent). -1 means no limit. 1598 | mssql.max_links = -1 1599 | 1600 | ; Minimum error severity to display. 1601 | mssql.min_error_severity = 10 1602 | 1603 | ; Minimum message severity to display. 1604 | mssql.min_message_severity = 10 1605 | 1606 | ; Compatibility mode with old versions of PHP 3.0. 1607 | mssql.compatibility_mode = Off 1608 | 1609 | ; Connect timeout 1610 | ;mssql.connect_timeout = 5 1611 | 1612 | ; Query timeout 1613 | ;mssql.timeout = 60 1614 | 1615 | ; Valid range 0 - 2147483647. Default = 4096. 1616 | ;mssql.textlimit = 4096 1617 | 1618 | ; Valid range 0 - 2147483647. Default = 4096. 1619 | ;mssql.textsize = 4096 1620 | 1621 | ; Limits the number of records in each batch. 0 = all records in one batch. 1622 | ;mssql.batchsize = 0 1623 | 1624 | ; Specify how datetime and datetim4 columns are returned 1625 | ; On => Returns data converted to SQL server settings 1626 | ; Off => Returns values as YYYY-MM-DD hh:mm:ss 1627 | ;mssql.datetimeconvert = On 1628 | 1629 | ; Use NT authentication when connecting to the server 1630 | mssql.secure_connection = Off 1631 | 1632 | ; Specify max number of processes. -1 = library default 1633 | ; msdlib defaults to 25 1634 | ; FreeTDS defaults to 4096 1635 | ;mssql.max_procs = -1 1636 | 1637 | ; Specify client character set. 1638 | ; If empty or not set the client charset from freetds.conf is used 1639 | ; This is only used when compiled with FreeTDS 1640 | ;mssql.charset = "ISO-8859-1" 1641 | 1642 | [Assertion] 1643 | ; Assert(expr); active by default. 1644 | ; http://php.net/assert.active 1645 | ;assert.active = On 1646 | 1647 | ; Issue a PHP warning for each failed assertion. 1648 | ; http://php.net/assert.warning 1649 | ;assert.warning = On 1650 | 1651 | ; Don't bail out by default. 1652 | ; http://php.net/assert.bail 1653 | ;assert.bail = Off 1654 | 1655 | ; User-function to be called if an assertion fails. 1656 | ; http://php.net/assert.callback 1657 | ;assert.callback = 0 1658 | 1659 | ; Eval the expression with current error_reporting(). Set to true if you want 1660 | ; error_reporting(0) around the eval(). 1661 | ; http://php.net/assert.quiet-eval 1662 | ;assert.quiet_eval = 0 1663 | 1664 | [COM] 1665 | ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs 1666 | ; http://php.net/com.typelib-file 1667 | ;com.typelib_file = 1668 | 1669 | ; allow Distributed-COM calls 1670 | ; http://php.net/com.allow-dcom 1671 | ;com.allow_dcom = true 1672 | 1673 | ; autoregister constants of a components typlib on com_load() 1674 | ; http://php.net/com.autoregister-typelib 1675 | ;com.autoregister_typelib = true 1676 | 1677 | ; register constants casesensitive 1678 | ; http://php.net/com.autoregister-casesensitive 1679 | ;com.autoregister_casesensitive = false 1680 | 1681 | ; show warnings on duplicate constant registrations 1682 | ; http://php.net/com.autoregister-verbose 1683 | ;com.autoregister_verbose = true 1684 | 1685 | ; The default character set code-page to use when passing strings to and from COM objects. 1686 | ; Default: system ANSI code page 1687 | ;com.code_page= 1688 | 1689 | [mbstring] 1690 | ; language for internal character representation. 1691 | ; http://php.net/mbstring.language 1692 | ;mbstring.language = Japanese 1693 | 1694 | ; internal/script encoding. 1695 | ; Some encoding cannot work as internal encoding. 1696 | ; (e.g. SJIS, BIG5, ISO-2022-*) 1697 | ; http://php.net/mbstring.internal-encoding 1698 | ;mbstring.internal_encoding = UTF-8 1699 | 1700 | ; http input encoding. 1701 | ; http://php.net/mbstring.http-input 1702 | ;mbstring.http_input = UTF-8 1703 | 1704 | ; http output encoding. mb_output_handler must be 1705 | ; registered as output buffer to function 1706 | ; http://php.net/mbstring.http-output 1707 | ;mbstring.http_output = pass 1708 | 1709 | ; enable automatic encoding translation according to 1710 | ; mbstring.internal_encoding setting. Input chars are 1711 | ; converted to internal encoding by setting this to On. 1712 | ; Note: Do _not_ use automatic encoding translation for 1713 | ; portable libs/applications. 1714 | ; http://php.net/mbstring.encoding-translation 1715 | ;mbstring.encoding_translation = Off 1716 | 1717 | ; automatic encoding detection order. 1718 | ; auto means 1719 | ; http://php.net/mbstring.detect-order 1720 | ;mbstring.detect_order = auto 1721 | 1722 | ; substitute_character used when character cannot be converted 1723 | ; one from another 1724 | ; http://php.net/mbstring.substitute-character 1725 | ;mbstring.substitute_character = none 1726 | 1727 | ; overload(replace) single byte functions by mbstring functions. 1728 | ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), 1729 | ; etc. Possible values are 0,1,2,4 or combination of them. 1730 | ; For example, 7 for overload everything. 1731 | ; 0: No overload 1732 | ; 1: Overload mail() function 1733 | ; 2: Overload str*() functions 1734 | ; 4: Overload ereg*() functions 1735 | ; http://php.net/mbstring.func-overload 1736 | ;mbstring.func_overload = 0 1737 | 1738 | ; enable strict encoding detection. 1739 | ;mbstring.strict_detection = On 1740 | 1741 | ; This directive specifies the regex pattern of content types for which mb_output_handler() 1742 | ; is activated. 1743 | ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) 1744 | ;mbstring.http_output_conv_mimetype= 1745 | 1746 | [gd] 1747 | ; Tell the jpeg decode to ignore warnings and try to create 1748 | ; a gd image. The warning will then be displayed as notices 1749 | ; disabled by default 1750 | ; http://php.net/gd.jpeg-ignore-warning 1751 | ;gd.jpeg_ignore_warning = 0 1752 | 1753 | [exif] 1754 | ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 1755 | ; With mbstring support this will automatically be converted into the encoding 1756 | ; given by corresponding encode setting. When empty mbstring.internal_encoding 1757 | ; is used. For the decode settings you can distinguish between motorola and 1758 | ; intel byte order. A decode setting cannot be empty. 1759 | ; http://php.net/exif.encode-unicode 1760 | ;exif.encode_unicode = ISO-8859-15 1761 | 1762 | ; http://php.net/exif.decode-unicode-motorola 1763 | ;exif.decode_unicode_motorola = UCS-2BE 1764 | 1765 | ; http://php.net/exif.decode-unicode-intel 1766 | ;exif.decode_unicode_intel = UCS-2LE 1767 | 1768 | ; http://php.net/exif.encode-jis 1769 | ;exif.encode_jis = 1770 | 1771 | ; http://php.net/exif.decode-jis-motorola 1772 | ;exif.decode_jis_motorola = JIS 1773 | 1774 | ; http://php.net/exif.decode-jis-intel 1775 | ;exif.decode_jis_intel = JIS 1776 | 1777 | [Tidy] 1778 | ; The path to a default tidy configuration file to use when using tidy 1779 | ; http://php.net/tidy.default-config 1780 | ;tidy.default_config = /usr/local/lib/php/default.tcfg 1781 | 1782 | ; Should tidy clean and repair output automatically? 1783 | ; WARNING: Do not use this option if you are generating non-html content 1784 | ; such as dynamic images 1785 | ; http://php.net/tidy.clean-output 1786 | tidy.clean_output = Off 1787 | 1788 | [soap] 1789 | ; Enables or disables WSDL caching feature. 1790 | ; http://php.net/soap.wsdl-cache-enabled 1791 | soap.wsdl_cache_enabled=1 1792 | 1793 | ; Sets the directory name where SOAP extension will put cache files. 1794 | ; http://php.net/soap.wsdl-cache-dir 1795 | soap.wsdl_cache_dir="/tmp" 1796 | 1797 | ; (time to live) Sets the number of second while cached file will be used 1798 | ; instead of original one. 1799 | ; http://php.net/soap.wsdl-cache-ttl 1800 | soap.wsdl_cache_ttl=86400 1801 | 1802 | ; Sets the size of the cache limit. (Max. number of WSDL files to cache) 1803 | soap.wsdl_cache_limit = 5 1804 | 1805 | [sysvshm] 1806 | ; A default size of the shared memory segment 1807 | ;sysvshm.init_mem = 10000 1808 | 1809 | [ldap] 1810 | ; Sets the maximum number of open links or -1 for unlimited. 1811 | ldap.max_links = -1 1812 | 1813 | [mcrypt] 1814 | ; For more information about mcrypt settings see http://php.net/mcrypt-module-open 1815 | 1816 | ; Directory where to load mcrypt algorithms 1817 | ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) 1818 | ;mcrypt.algorithms_dir= 1819 | 1820 | ; Directory where to load mcrypt modes 1821 | ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) 1822 | ;mcrypt.modes_dir= 1823 | 1824 | [dba] 1825 | ;dba.default_handler= 1826 | 1827 | [opcache] 1828 | ; Determines if Zend OPCache is enabled 1829 | ;opcache.enable=0 1830 | 1831 | ; Determines if Zend OPCache is enabled for the CLI version of PHP 1832 | ;opcache.enable_cli=0 1833 | 1834 | ; The OPcache shared memory storage size. 1835 | ;opcache.memory_consumption=64 1836 | 1837 | ; The amount of memory for interned strings in Mbytes. 1838 | ;opcache.interned_strings_buffer=4 1839 | 1840 | ; The maximum number of keys (scripts) in the OPcache hash table. 1841 | ; Only numbers between 200 and 100000 are allowed. 1842 | ;opcache.max_accelerated_files=2000 1843 | 1844 | ; The maximum percentage of "wasted" memory until a restart is scheduled. 1845 | ;opcache.max_wasted_percentage=5 1846 | 1847 | ; When this directive is enabled, the OPcache appends the current working 1848 | ; directory to the script key, thus eliminating possible collisions between 1849 | ; files with the same name (basename). Disabling the directive improves 1850 | ; performance, but may break existing applications. 1851 | ;opcache.use_cwd=1 1852 | 1853 | ; When disabled, you must reset the OPcache manually or restart the 1854 | ; webserver for changes to the filesystem to take effect. 1855 | ;opcache.validate_timestamps=1 1856 | 1857 | ; How often (in seconds) to check file timestamps for changes to the shared 1858 | ; memory storage allocation. ("1" means validate once per second, but only 1859 | ; once per request. "0" means always validate) 1860 | ;opcache.revalidate_freq=2 1861 | 1862 | ; Enables or disables file search in include_path optimization 1863 | ;opcache.revalidate_path=0 1864 | 1865 | ; If disabled, all PHPDoc comments are dropped from the code to reduce the 1866 | ; size of the optimized code. 1867 | ;opcache.save_comments=1 1868 | 1869 | ; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments" 1870 | ; may be always stored (save_comments=1), but not loaded by applications 1871 | ; that don't need them anyway. 1872 | ;opcache.load_comments=1 1873 | 1874 | ; If enabled, a fast shutdown sequence is used for the accelerated code 1875 | ;opcache.fast_shutdown=0 1876 | 1877 | ; Allow file existence override (file_exists, etc.) performance feature. 1878 | ;opcache.enable_file_override=0 1879 | 1880 | ; A bitmask, where each bit enables or disables the appropriate OPcache 1881 | ; passes 1882 | ;opcache.optimization_level=0xffffffff 1883 | 1884 | ;opcache.inherited_hack=1 1885 | ;opcache.dups_fix=0 1886 | 1887 | ; The location of the OPcache blacklist file (wildcards allowed). 1888 | ; Each OPcache blacklist file is a text file that holds the names of files 1889 | ; that should not be accelerated. The file format is to add each filename 1890 | ; to a new line. The filename may be a full path or just a file prefix 1891 | ; (i.e., /var/www/x blacklists all the files and directories in /var/www 1892 | ; that start with 'x'). Line starting with a ; are ignored (comments). 1893 | ;opcache.blacklist_filename= 1894 | 1895 | ; Allows exclusion of large files from being cached. By default all files 1896 | ; are cached. 1897 | ;opcache.max_file_size=0 1898 | 1899 | ; Check the cache checksum each N requests. 1900 | ; The default value of "0" means that the checks are disabled. 1901 | ;opcache.consistency_checks=0 1902 | 1903 | ; How long to wait (in seconds) for a scheduled restart to begin if the cache 1904 | ; is not being accessed. 1905 | ;opcache.force_restart_timeout=180 1906 | 1907 | ; OPcache error_log file name. Empty string assumes "stderr". 1908 | ;opcache.error_log= 1909 | 1910 | ; All OPcache errors go to the Web server log. 1911 | ; By default, only fatal errors (level 0) or errors (level 1) are logged. 1912 | ; You can also enable warnings (level 2), info messages (level 3) or 1913 | ; debug messages (level 4). 1914 | ;opcache.log_verbosity_level=1 1915 | 1916 | ; Preferred Shared Memory back-end. Leave empty and let the system decide. 1917 | ;opcache.preferred_memory_model= 1918 | 1919 | ; Protect the shared memory from unexpected writing during script execution. 1920 | ; Useful for internal debugging only. 1921 | ;opcache.protect_memory=0 1922 | 1923 | [curl] 1924 | ; A default value for the CURLOPT_CAINFO option. This is required to be an 1925 | ; absolute path. 1926 | ;curl.cainfo = 1927 | 1928 | ; Local Variables: 1929 | ; tab-width: 4 1930 | ; End: 1931 | -------------------------------------------------------------------------------- /conf7/README.md: -------------------------------------------------------------------------------- 1 | # 配置文件说明 2 | 3 | 基于php7.0.6的配置文件 4 | 5 | - `/usr/local/etc/`目录下有：`php-fpm.conf` 6 | - `/usr/local/etc/php-fpm.d/`目录下有：`www.conf`, `docker.conf`, `zz-docker.conf` 7 | 8 | -------------------------------------------------------------------------------- /conf7/docker.conf: -------------------------------------------------------------------------------- 1 | [global] 2 | error_log = /proc/self/fd/2 3 | 4 | [www] 5 | ; if we send this to /proc/self/fd/1, it never appears 6 | access.log = /proc/self/fd/2 7 | 8 | clear_env = no 9 | 10 | ; Ensure worker stdout and stderr are sent to the main error log. 11 | catch_workers_output = yes 12 | -------------------------------------------------------------------------------- /conf7/php-fpm.conf: -------------------------------------------------------------------------------- 1 | ;;;;;;;;;;;;;;;;;;;;; 2 | ; FPM Configuration ; 3 | ;;;;;;;;;;;;;;;;;;;;; 4 | 5 | ; All relative paths in this configuration file are relative to PHP's install 6 | ; prefix (/usr/local). This prefix can be dynamically changed by using the 7 | ; '-p' argument from the command line. 8 | 9 | ;;;;;;;;;;;;;;;;;; 10 | ; Global Options ; 11 | ;;;;;;;;;;;;;;;;;; 12 | 13 | [global] 14 | ; Pid file 15 | ; Note: the default prefix is /usr/local/var 16 | ; Default Value: none 17 | ;pid = run/php-fpm.pid 18 | 19 | ; Error log file 20 | ; If it's set to "syslog", log is sent to syslogd instead of being written 21 | ; in a local file. 22 | ; Note: the default prefix is /usr/local/var 23 | ; Default Value: log/php-fpm.log 24 | ;error_log = log/php-fpm.log 25 | 26 | ; syslog_facility is used to specify what type of program is logging the 27 | ; message. This lets syslogd specify that messages from different facilities 28 | ; will be handled differently. 29 | ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON) 30 | ; Default Value: daemon 31 | ;syslog.facility = daemon 32 | 33 | ; syslog_ident is prepended to every message. If you have multiple FPM 34 | ; instances running on the same server, you can change the default value 35 | ; which must suit common needs. 36 | ; Default Value: php-fpm 37 | ;syslog.ident = php-fpm 38 | 39 | ; Log level 40 | ; Possible Values: alert, error, warning, notice, debug 41 | ; Default Value: notice 42 | ;log_level = notice 43 | 44 | ; If this number of child processes exit with SIGSEGV or SIGBUS within the time 45 | ; interval set by emergency_restart_interval then FPM will restart. A value 46 | ; of '0' means 'Off'. 47 | ; Default Value: 0 48 | ;emergency_restart_threshold = 0 49 | 50 | ; Interval of time used by emergency_restart_interval to determine when 51 | ; a graceful restart will be initiated. This can be useful to work around 52 | ; accidental corruptions in an accelerator's shared memory. 53 | ; Available Units: s(econds), m(inutes), h(ours), or d(ays) 54 | ; Default Unit: seconds 55 | ; Default Value: 0 56 | ;emergency_restart_interval = 0 57 | 58 | ; Time limit for child processes to wait for a reaction on signals from master. 59 | ; Available units: s(econds), m(inutes), h(ours), or d(ays) 60 | ; Default Unit: seconds 61 | ; Default Value: 0 62 | ;process_control_timeout = 0 63 | 64 | ; The maximum number of processes FPM will fork. This has been design to control 65 | ; the global number of processes when using dynamic PM within a lot of pools. 66 | ; Use it with caution. 67 | ; Note: A value of 0 indicates no limit 68 | ; Default Value: 0 69 | ; process.max = 128 70 | 71 | ; Specify the nice(2) priority to apply to the master process (only if set) 72 | ; The value can vary from -19 (highest priority) to 20 (lower priority) 73 | ; Note: - It will only work if the FPM master process is launched as root 74 | ; - The pool process will inherit the master process priority 75 | ; unless it specified otherwise 76 | ; Default Value: no set 77 | ; process.priority = -19 78 | 79 | ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. 80 | ; Default Value: yes 81 | ;daemonize = yes 82 | 83 | ; Set open file descriptor rlimit for the master process. 84 | ; Default Value: system defined value 85 | ;rlimit_files = 1024 86 | 87 | ; Set max core size rlimit for the master process. 88 | ; Possible Values: 'unlimited' or an integer greater or equal to 0 89 | ; Default Value: system defined value 90 | ;rlimit_core = 0 91 | 92 | ; Specify the event mechanism FPM will use. The following is available: 93 | ; - select (any POSIX os) 94 | ; - poll (any POSIX os) 95 | ; - epoll (linux >= 2.5.44) 96 | ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0) 97 | ; - /dev/poll (Solaris >= 7) 98 | ; - port (Solaris >= 10) 99 | ; Default Value: not set (auto detection) 100 | ;events.mechanism = epoll 101 | 102 | ; When FPM is build with systemd integration, specify the interval, 103 | ; in second, between health report notification to systemd. 104 | ; Set to 0 to disable. 105 | ; Available Units: s(econds), m(inutes), h(ours) 106 | ; Default Unit: seconds 107 | ; Default value: 10 108 | ;systemd_interval = 10 109 | 110 | ;;;;;;;;;;;;;;;;;;;; 111 | ; Pool Definitions ; 112 | ;;;;;;;;;;;;;;;;;;;; 113 | 114 | ; Multiple pools of child processes may be started with different listening 115 | ; ports and different management options. The name of the pool will be 116 | ; used in logs and stats. There is no limitation on the number of pools which 117 | ; FPM can handle. Your system will tell you anyway :) 118 | 119 | ; Include one or more files. If glob(3) exists, it is used to include a bunch of 120 | ; files from a glob(3) pattern. This directive can be used everywhere in the 121 | ; file. 122 | ; Relative path can also be used. They will be prefixed by: 123 | ; - the global prefix if it's been set (-p argument) 124 | ; - /usr/local otherwise 125 | include=etc/php-fpm.d/*.conf 126 | -------------------------------------------------------------------------------- /conf7/www.conf: -------------------------------------------------------------------------------- 1 | ; Start a new pool named 'www'. 2 | ; the variable $pool can we used in any directive and will be replaced by the 3 | ; pool name ('www' here) 4 | [www] 5 | 6 | ; Per pool prefix 7 | ; It only applies on the following directives: 8 | ; - 'access.log' 9 | ; - 'slowlog' 10 | ; - 'listen' (unixsocket) 11 | ; - 'chroot' 12 | ; - 'chdir' 13 | ; - 'php_values' 14 | ; - 'php_admin_values' 15 | ; When not set, the global prefix (or NONE) applies instead. 16 | ; Note: This directive can also be relative to the global prefix. 17 | ; Default Value: none 18 | ;prefix = /path/to/pools/$pool 19 | 20 | ; Unix user/group of processes 21 | ; Note: The user is mandatory. If the group is not set, the default user's group 22 | ; will be used. 23 | user = www-data 24 | group = www-data 25 | 26 | ; The address on which to accept FastCGI requests. 27 | ; Valid syntaxes are: 28 | ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on 29 | ; a specific port; 30 | ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on 31 | ; a specific port; 32 | ; 'port' - to listen on a TCP socket to all addresses 33 | ; (IPv6 and IPv4-mapped) on a specific port; 34 | ; '/path/to/unix/socket' - to listen on a unix socket. 35 | ; Note: This value is mandatory. 36 | listen = 127.0.0.1:9000 37 | 38 | ; Set listen(2) backlog. 39 | ; Default Value: 511 (-1 on FreeBSD and OpenBSD) 40 | ;listen.backlog = 511 41 | 42 | ; Set permissions for unix socket, if one is used. In Linux, read/write 43 | ; permissions must be set in order to allow connections from a web server. Many 44 | ; BSD-derived systems allow connections regardless of permissions. 45 | ; Default Values: user and group are set as the running user 46 | ; mode is set to 0660 47 | ;listen.owner = www-data 48 | ;listen.group = www-data 49 | ;listen.mode = 0660 50 | ; When POSIX Access Control Lists are supported you can set them using 51 | ; these options, value is a comma separated list of user/group names. 52 | ; When set, listen.owner and listen.group are ignored 53 | ;listen.acl_users = 54 | ;listen.acl_groups = 55 | 56 | ; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. 57 | ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original 58 | ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address 59 | ; must be separated by a comma. If this value is left blank, connections will be 60 | ; accepted from any ip address. 61 | ; Default Value: any 62 | ;listen.allowed_clients = 127.0.0.1 63 | 64 | ; Specify the nice(2) priority to apply to the pool processes (only if set) 65 | ; The value can vary from -19 (highest priority) to 20 (lower priority) 66 | ; Note: - It will only work if the FPM master process is launched as root 67 | ; - The pool processes will inherit the master process priority 68 | ; unless it specified otherwise 69 | ; Default Value: no set 70 | ; process.priority = -19 71 | 72 | ; Choose how the process manager will control the number of child processes. 73 | ; Possible Values: 74 | ; static - a fixed number (pm.max_children) of child processes; 75 | ; dynamic - the number of child processes are set dynamically based on the 76 | ; following directives. With this process management, there will be 77 | ; always at least 1 children. 78 | ; pm.max_children - the maximum number of children that can 79 | ; be alive at the same time. 80 | ; pm.start_servers - the number of children created on startup. 81 | ; pm.min_spare_servers - the minimum number of children in 'idle' 82 | ; state (waiting to process). If the number 83 | ; of 'idle' processes is less than this 84 | ; number then some children will be created. 85 | ; pm.max_spare_servers - the maximum number of children in 'idle' 86 | ; state (waiting to process). If the number 87 | ; of 'idle' processes is greater than this 88 | ; number then some children will be killed. 89 | ; ondemand - no children are created at startup. Children will be forked when 90 | ; new requests will connect. The following parameter are used: 91 | ; pm.max_children - the maximum number of children that 92 | ; can be alive at the same time. 93 | ; pm.process_idle_timeout - The number of seconds after which 94 | ; an idle process will be killed. 95 | ; Note: This value is mandatory. 96 | pm = dynamic 97 | 98 | ; The number of child processes to be created when pm is set to 'static' and the 99 | ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. 100 | ; This value sets the limit on the number of simultaneous requests that will be 101 | ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. 102 | ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP 103 | ; CGI. The below defaults are based on a server without much resources. Don't 104 | ; forget to tweak pm.* to fit your needs. 105 | ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' 106 | ; Note: This value is mandatory. 107 | pm.max_children = 5 108 | 109 | ; The number of child processes created on startup. 110 | ; Note: Used only when pm is set to 'dynamic' 111 | ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 112 | pm.start_servers = 2 113 | 114 | ; The desired minimum number of idle server processes. 115 | ; Note: Used only when pm is set to 'dynamic' 116 | ; Note: Mandatory when pm is set to 'dynamic' 117 | pm.min_spare_servers = 1 118 | 119 | ; The desired maximum number of idle server processes. 120 | ; Note: Used only when pm is set to 'dynamic' 121 | ; Note: Mandatory when pm is set to 'dynamic' 122 | pm.max_spare_servers = 3 123 | 124 | ; The number of seconds after which an idle process will be killed. 125 | ; Note: Used only when pm is set to 'ondemand' 126 | ; Default Value: 10s 127 | ;pm.process_idle_timeout = 10s; 128 | 129 | ; The number of requests each child process should execute before respawning. 130 | ; This can be useful to work around memory leaks in 3rd party libraries. For 131 | ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. 132 | ; Default Value: 0 133 | ;pm.max_requests = 500 134 | 135 | ; The URI to view the FPM status page. If this value is not set, no URI will be 136 | ; recognized as a status page. It shows the following informations: 137 | ; pool - the name of the pool; 138 | ; process manager - static, dynamic or ondemand; 139 | ; start time - the date and time FPM has started; 140 | ; start since - number of seconds since FPM has started; 141 | ; accepted conn - the number of request accepted by the pool; 142 | ; listen queue - the number of request in the queue of pending 143 | ; connections (see backlog in listen(2)); 144 | ; max listen queue - the maximum number of requests in the queue 145 | ; of pending connections since FPM has started; 146 | ; listen queue len - the size of the socket queue of pending connections; 147 | ; idle processes - the number of idle processes; 148 | ; active processes - the number of active processes; 149 | ; total processes - the number of idle + active processes; 150 | ; max active processes - the maximum number of active processes since FPM 151 | ; has started; 152 | ; max children reached - number of times, the process limit has been reached, 153 | ; when pm tries to start more children (works only for 154 | ; pm 'dynamic' and 'ondemand'); 155 | ; Value are updated in real time. 156 | ; Example output: 157 | ; pool: www 158 | ; process manager: static 159 | ; start time: 01/Jul/2011:17:53:49 +0200 160 | ; start since: 62636 161 | ; accepted conn: 190460 162 | ; listen queue: 0 163 | ; max listen queue: 1 164 | ; listen queue len: 42 165 | ; idle processes: 4 166 | ; active processes: 11 167 | ; total processes: 15 168 | ; max active processes: 12 169 | ; max children reached: 0 170 | ; 171 | ; By default the status page output is formatted as text/plain. Passing either 172 | ; 'html', 'xml' or 'json' in the query string will return the corresponding 173 | ; output syntax. Example: 174 | ; http://www.foo.bar/status 175 | ; http://www.foo.bar/status?json 176 | ; http://www.foo.bar/status?html 177 | ; http://www.foo.bar/status?xml 178 | ; 179 | ; By default the status page only outputs short status. Passing 'full' in the 180 | ; query string will also return status for each pool process. 181 | ; Example: 182 | ; http://www.foo.bar/status?full 183 | ; http://www.foo.bar/status?json&full 184 | ; http://www.foo.bar/status?html&full 185 | ; http://www.foo.bar/status?xml&full 186 | ; The Full status returns for each process: 187 | ; pid - the PID of the process; 188 | ; state - the state of the process (Idle, Running, ...); 189 | ; start time - the date and time the process has started; 190 | ; start since - the number of seconds since the process has started; 191 | ; requests - the number of requests the process has served; 192 | ; request duration - the duration in µs of the requests; 193 | ; request method - the request method (GET, POST, ...); 194 | ; request URI - the request URI with the query string; 195 | ; content length - the content length of the request (only with POST); 196 | ; user - the user (PHP_AUTH_USER) (or '-' if not set); 197 | ; script - the main script called (or '-' if not set); 198 | ; last request cpu - the %cpu the last request consumed 199 | ; it's always 0 if the process is not in Idle state 200 | ; because CPU calculation is done when the request 201 | ; processing has terminated; 202 | ; last request memory - the max amount of memory the last request consumed 203 | ; it's always 0 if the process is not in Idle state 204 | ; because memory calculation is done when the request 205 | ; processing has terminated; 206 | ; If the process is in Idle state, then informations are related to the 207 | ; last request the process has served. Otherwise informations are related to 208 | ; the current request being served. 209 | ; Example output: 210 | ; ************************ 211 | ; pid: 31330 212 | ; state: Running 213 | ; start time: 01/Jul/2011:17:53:49 +0200 214 | ; start since: 63087 215 | ; requests: 12808 216 | ; request duration: 1250261 217 | ; request method: GET 218 | ; request URI: /test_mem.php?N=10000 219 | ; content length: 0 220 | ; user: - 221 | ; script: /home/fat/web/docs/php/test_mem.php 222 | ; last request cpu: 0.00 223 | ; last request memory: 0 224 | ; 225 | ; Note: There is a real-time FPM status monitoring sample web page available 226 | ; It's available in: /usr/local/share/php/fpm/status.html 227 | ; 228 | ; Note: The value must start with a leading slash (/). The value can be 229 | ; anything, but it may not be a good idea to use the .php extension or it 230 | ; may conflict with a real PHP file. 231 | ; Default Value: not set 232 | ;pm.status_path = /status 233 | 234 | ; The ping URI to call the monitoring page of FPM. If this value is not set, no 235 | ; URI will be recognized as a ping page. This could be used to test from outside 236 | ; that FPM is alive and responding, or to 237 | ; - create a graph of FPM availability (rrd or such); 238 | ; - remove a server from a group if it is not responding (load balancing); 239 | ; - trigger alerts for the operating team (24/7). 240 | ; Note: The value must start with a leading slash (/). The value can be 241 | ; anything, but it may not be a good idea to use the .php extension or it 242 | ; may conflict with a real PHP file. 243 | ; Default Value: not set 244 | ;ping.path = /ping 245 | 246 | ; This directive may be used to customize the response of a ping request. The 247 | ; response is formatted as text/plain with a 200 response code. 248 | ; Default Value: pong 249 | ;ping.response = pong 250 | 251 | ; The access log file 252 | ; Default: not set 253 | ;access.log = log/$pool.access.log 254 | 255 | ; The access log format. 256 | ; The following syntax is allowed 257 | ; %%: the '%' character 258 | ; %C: %CPU used by the request 259 | ; it can accept the following format: 260 | ; - %{user}C for user CPU only 261 | ; - %{system}C for system CPU only 262 | ; - %{total}C for user + system CPU (default) 263 | ; %d: time taken to serve the request 264 | ; it can accept the following format: 265 | ; - %{seconds}d (default) 266 | ; - %{miliseconds}d 267 | ; - %{mili}d 268 | ; - %{microseconds}d 269 | ; - %{micro}d 270 | ; %e: an environment variable (same as $_ENV or $_SERVER) 271 | ; it must be associated with embraces to specify the name of the env 272 | ; variable. Some exemples: 273 | ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e 274 | ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e 275 | ; %f: script filename 276 | ; %l: content-length of the request (for POST request only) 277 | ; %m: request method 278 | ; %M: peak of memory allocated by PHP 279 | ; it can accept the following format: 280 | ; - %{bytes}M (default) 281 | ; - %{kilobytes}M 282 | ; - %{kilo}M 283 | ; - %{megabytes}M 284 | ; - %{mega}M 285 | ; %n: pool name 286 | ; %o: output header 287 | ; it must be associated with embraces to specify the name of the header: 288 | ; - %{Content-Type}o 289 | ; - %{X-Powered-By}o 290 | ; - %{Transfert-Encoding}o 291 | ; - .... 292 | ; %p: PID of the child that serviced the request 293 | ; %P: PID of the parent of the child that serviced the request 294 | ; %q: the query string 295 | ; %Q: the '?' character if query string exists 296 | ; %r: the request URI (without the query string, see %q and %Q) 297 | ; %R: remote IP address 298 | ; %s: status (response code) 299 | ; %t: server time the request was received 300 | ; it can accept a strftime(3) format: 301 | ; %d/%b/%Y:%H:%M:%S %z (default) 302 | ; The strftime(3) format must be encapsuled in a %{}t tag 303 | ; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 304 | ; %T: time the log has been written (the request has finished) 305 | ; it can accept a strftime(3) format: 306 | ; %d/%b/%Y:%H:%M:%S %z (default) 307 | ; The strftime(3) format must be encapsuled in a %{}t tag 308 | ; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 309 | ; %u: remote user 310 | ; 311 | ; Default: "%R - %u %t \"%m %r\" %s" 312 | ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" 313 | 314 | ; The log file for slow requests 315 | ; Default Value: not set 316 | ; Note: slowlog is mandatory if request_slowlog_timeout is set 317 | ;slowlog = log/$pool.log.slow 318 | 319 | ; The timeout for serving a single request after which a PHP backtrace will be 320 | ; dumped to the 'slowlog' file. A value of '0s' means 'off'. 321 | ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 322 | ; Default Value: 0 323 | ;request_slowlog_timeout = 0 324 | 325 | ; The timeout for serving a single request after which the worker process will 326 | ; be killed. This option should be used when the 'max_execution_time' ini option 327 | ; does not stop script execution for some reason. A value of '0' means 'off'. 328 | ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 329 | ; Default Value: 0 330 | ;request_terminate_timeout = 0 331 | 332 | ; Set open file descriptor rlimit. 333 | ; Default Value: system defined value 334 | ;rlimit_files = 1024 335 | 336 | ; Set max core size rlimit. 337 | ; Possible Values: 'unlimited' or an integer greater or equal to 0 338 | ; Default Value: system defined value 339 | ;rlimit_core = 0 340 | 341 | ; Chroot to this directory at the start. This value must be defined as an 342 | ; absolute path. When this value is not set, chroot is not used. 343 | ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one 344 | ; of its subdirectories. If the pool prefix is not set, the global prefix 345 | ; will be used instead. 346 | ; Note: chrooting is a great security feature and should be used whenever 347 | ; possible. However, all PHP paths will be relative to the chroot 348 | ; (error_log, sessions.save_path, ...). 349 | ; Default Value: not set 350 | ;chroot = 351 | 352 | ; Chdir to this directory at the start. 353 | ; Note: relative path can be used. 354 | ; Default Value: current directory or / when chroot 355 | ;chdir = /var/www 356 | 357 | ; Redirect worker stdout and stderr into main error log. If not set, stdout and 358 | ; stderr will be redirected to /dev/null according to FastCGI specs. 359 | ; Note: on highloaded environement, this can cause some delay in the page 360 | ; process time (several ms). 361 | ; Default Value: no 362 | ;catch_workers_output = yes 363 | 364 | ; Clear environment in FPM workers 365 | ; Prevents arbitrary environment variables from reaching FPM worker processes 366 | ; by clearing the environment in workers before env vars specified in this 367 | ; pool configuration are added. 368 | ; Setting to "no" will make all environment variables available to PHP code 369 | ; via getenv(), $_ENV and $_SERVER. 370 | ; Default Value: yes 371 | ;clear_env = no 372 | 373 | ; Limits the extensions of the main script FPM will allow to parse. This can 374 | ; prevent configuration mistakes on the web server side. You should only limit 375 | ; FPM to .php extensions to prevent malicious users to use other extensions to 376 | ; exectute php code. 377 | ; Note: set an empty value to allow all extensions. 378 | ; Default Value: .php 379 | ;security.limit_extensions = .php .php3 .php4 .php5 .php7 380 | 381 | ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from 382 | ; the current environment. 383 | ; Default Value: clean env 384 | ;env[HOSTNAME] = $HOSTNAME 385 | ;env[PATH] = /usr/local/bin:/usr/bin:/bin 386 | ;env[TMP] = /tmp 387 | ;env[TMPDIR] = /tmp 388 | ;env[TEMP] = /tmp 389 | 390 | ; Additional php.ini defines, specific to this pool of workers. These settings 391 | ; overwrite the values previously defined in the php.ini. The directives are the 392 | ; same as the PHP SAPI: 393 | ; php_value/php_flag - you can set classic ini defines which can 394 | ; be overwritten from PHP call 'ini_set'. 395 | ; php_admin_value/php_admin_flag - these directives won't be overwritten by 396 | ; PHP call 'ini_set' 397 | ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. 398 | 399 | ; Defining 'extension' will load the corresponding shared extension from 400 | ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not 401 | ; overwrite previously defined php.ini values, but will append the new value 402 | ; instead. 403 | 404 | ; Note: path INI options can be relative and will be expanded with the prefix 405 | ; (pool, global or /usr/local) 406 | 407 | ; Default Value: nothing is defined by default except the values in php.ini and 408 | ; specified at startup with the -d argument 409 | ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com 410 | ;php_flag[display_errors] = off 411 | ;php_admin_value[error_log] = /var/log/fpm-php.www.log 412 | ;php_admin_flag[log_errors] = on 413 | ;php_admin_value[memory_limit] = 32M 414 | -------------------------------------------------------------------------------- /conf7/zz-docker.conf: -------------------------------------------------------------------------------- 1 | [global] 2 | daemonize = no 3 | 4 | [www] 5 | listen = [::]:9000 6 | -------------------------------------------------------------------------------- /exec.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | docker exec -ti ibbd-php-fpm /bin/bash 4 | 5 | -------------------------------------------------------------------------------- /init.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | # 3 | # 初始化操作 4 | 5 | 6 | # 初始化php的配置文件 7 | [ ! -f run.sh ] && cp run.sh.example run.sh 8 | [ ! -f conf/php.ini ] && cp conf/php.ini.example conf/php.ini 9 | [ ! -f conf/php-fpm.conf ] && cp conf/php-fpm.conf.example conf/php-fpm.conf 10 | 11 | # 下载相关文件 12 | #source ./download.sh 13 | 14 | echo '==> php-fpm init ok' 15 | 16 | -------------------------------------------------------------------------------- /php-fpm-dev/Dockerfile: -------------------------------------------------------------------------------- 1 | # 2 | # PHP FPM Dev Dockerfile 3 | # 在ibbd/php-fpm的基础上安装开发环境 4 | # 5 | # https://github.com/ibbd/dockerfile-fpm-php-fpm/php-dev 6 | # 7 | # sudo docker build -t ibbd/php-fpm-dev ./ 8 | # 9 | 10 | # Pull base image. 11 | FROM ibbd/php-fpm-ext 12 | 13 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 14 | 15 | # 安装公共测试工具及开发工具 16 | # 使用pecl install xdebug, 会有warning：Xdebug MUST be loaded as a Zend extension in Unknown on line 0 17 | # xdebug 必须使用 zend_extension_ts 或者 zend_extension 来标明它是zend的扩展 18 | # extension意为基于php引擎的扩展，zend_extension意为基于zend引擎的扩展 19 | # xdebug does not have REST dependency information 20 | # install phpDocumentor (需要 Graphviz) 21 | # @see http://www.phpdoc.org/ 22 | # @see http://www.phpdoc.org/docs/latest/index.html 23 | # phptrace安装之后会导致php用不了 24 | #&& pecl install trace \ 25 | #&& echo "extension=trace.so" > /usr/local/etc/php/conf.d/trace.ini \ 26 | COPY phpunit.phar /usr/local/bin/phpunit 27 | RUN apt-get update \ 28 | && apt-get install -y --no-install-recommends \ 29 | man \ 30 | git-core \ 31 | vim-tiny \ 32 | Graphviz \ 33 | tcpdump \ 34 | strace \ 35 | && echo "set fileencodings=utf-8" >> /etc/vim/vimrc \ 36 | && echo "set fileencoding=utf-8" >> /etc/vim/vimrc \ 37 | && echo "set encoding=utf-8" >> /etc/vim/vimrc \ 38 | && git config --global push.default simple \ 39 | && pear install doc.php.net/pman \ 40 | && pear upgrade pear \ 41 | && pear channel-discover pear.phpdoc.org \ 42 | && pear install phpdoc/phpDocumentor \ 43 | && pecl install --force --alldeps xdebug \ 44 | && echo "zend_extension=xdebug.so" > /usr/local/etc/php/conf.d/xdebug.ini \ 45 | && pecl install xhprof-0.9.4 \ 46 | && echo "extension=xhprof.so" > /usr/local/etc/php/conf.d/xhprof.ini \ 47 | && chmod +x /usr/local/bin/phpunit \ 48 | && pecl clear-cache \ 49 | && apt-get autoremove \ 50 | && apt-get clean \ 51 | && rm -r /var/lib/apt/lists/* 52 | 53 | 54 | # 终端设置 55 | # 执行php-fpm时，默认值是dumb，这时在终端操作时可能会出现：terminal is not fully functional 56 | #ENV TERM xterm 57 | 58 | WORKDIR /var/www 59 | 60 | -------------------------------------------------------------------------------- /php-fpm-dev/README.md: -------------------------------------------------------------------------------- 1 | ## PHP FPM开发环境镜像构建文档 2 | 3 | - 基础镜像：`docker pull ibbd/php-fpm` 4 | - 使用在本地开发环境和测试环境, 主要是增加了基本的工具（如git，vim）和调试工具（如phpunit，xdebug，xhprof等） 5 | 6 | ## 安装列表 7 | 8 | - phpunit 9 | - xdebug 10 | - man 11 | - vim-tiny 12 | - git-core 13 | - pman 14 | - tcpdump 15 | - strace 16 | - Graphviz : phpDocumentor需要 17 | - phpDocumentor 18 | - xhprof 0.9.4 19 | 20 | 21 | -------------------------------------------------------------------------------- /php-fpm-dev/build.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | name=php-fpm-dev 4 | 5 | # 清除已有的 6 | sudo docker stop ibbd-$name 7 | sudo docker rm ibbd-$name 8 | sudo docker rmi ibbd/$name 9 | 10 | # 重新生成 11 | sudo docker build -t ibbd/$name ./ 12 | 13 | -------------------------------------------------------------------------------- /php-fpm-dev/phpunit.phar: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/IBBD/dockerfile-php-fpm/cd4fd948d6509cfdfc9f8bcb6b8880a6b2956505/php-fpm-dev/phpunit.phar -------------------------------------------------------------------------------- /php-fpm-dev/run.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | # 3 | 4 | name=php-fpm-dev 5 | sudo docker stop ibbd-$name 6 | sudo docker rm ibbd-$name 7 | 8 | sudo docker --debug run -ti --name ibbd-$name -d \ 9 | -p 9000:9000 \ 10 | -v /var/www:/var/www \ 11 | ibbd/$name \ 12 | php-fpm -c /usr/local/etc/php/php.ini -y /usr/local/etc/php-fpm.conf 13 | 14 | -------------------------------------------------------------------------------- /php-fpm-ext/Dockerfile: -------------------------------------------------------------------------------- 1 | # 2 | # PHP Dockerfile 3 | # 满足laravel5.2等项目需求 4 | # 5 | # https://github.com/ibbd/dockerfile-php-fpm/php-fpm-ext 6 | # 7 | # sudo docker build -t ibbd/php-fpm-ext ./ 8 | # 9 | 10 | # Pull base image. 11 | FROM ibbd/php-fpm 12 | 13 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 14 | 15 | # Install modules 16 | # composer需要先安装zip 17 | # pecl install imagick时需要libmagickwand-dev。但是这个安装的东西有点多，python2.7也安装了 18 | RUN \ 19 | apt-get update \ 20 | && apt-get install -y --no-install-recommends \ 21 | libfreetype6-dev \ 22 | libjpeg62-turbo-dev \ 23 | libpng12-dev \ 24 | libmagickwand-dev \ 25 | && apt-get autoremove \ 26 | && apt-get clean \ 27 | && rm -r /var/lib/apt/lists/* 28 | 29 | 30 | # install php modules 31 | # pecl install php modules 32 | # 安装mongo扩展时，出现如下错误： 33 | # Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20131226/mongo.so' 34 | # 需要先安装libssl-dev 35 | # 如果本地构建的话，建议先下载好相应的扩展包 36 | # 直接使用pecl install msgpack会报错： 37 | # Failed to download pecl/msgpack within preferred state "stable", latest release is version 0.5.7, stability "beta", use "channel://pecl.php.net/msgpack-0.5.7" to install 38 | # 39 | # install imagick 报错如下 40 | # checking ImageMagick MagickWand API configuration program... configure: error: not found. Please provide a path to MagickWand-config or Wand-config program. 41 | # ERROR: `/tmp/pear/temp/imagick/configure --with-php-config=/usr/local/bin/php-config --with-imagick' failed 42 | # 原因：由于安装imagick扩展时需要依赖ImageMagick的函数库，因此必须要先安装ImageMagick, 但是安装了却依然不行。官网上有人评论需要安装libmagickwand-dev 43 | # 解决：apt-get install libmagickwand-dev 44 | # 45 | # 注意：msgpack 2.0.0需要php7 46 | #&& pecl install msgpack-beta \ 47 | #&& pecl install mongo \ 48 | #&& echo "extension=mongo.so" > /usr/local/etc/php/conf.d/mongo.ini \ 49 | # 2016-03-09 增加mysql扩展 50 | # iconv tokenizer pdo mbstring: 已经包含在基础镜像里 51 | RUN docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \ 52 | && docker-php-ext-install gd \ 53 | && docker-php-ext-install mysqli mysql \ 54 | #&& pecl install memcache \ 55 | #&& echo "extension=memcache.so" > /usr/local/etc/php/conf.d/memcache.ini \ 56 | #&& pecl install imagick \ 57 | #&& echo "extension=imagick.so" > /usr/local/etc/php/conf.d/imagick.ini \ 58 | && pecl clear-cache 59 | 60 | # Define mountable directories. 61 | VOLUME /var/www 62 | 63 | # 工作目录 64 | WORKDIR /var/www 65 | 66 | EXPOSE 9000 67 | -------------------------------------------------------------------------------- /php-fpm-ext/README.md: -------------------------------------------------------------------------------- 1 | # PHP FPM 镜像 For Laravel and Lumen 2 | 3 | 扩展镜像，主要满足产品项目的特殊需要，基于`ibbd/php-fpm` 4 | 5 | ## php5.6-fpm镜像体系 6 | 7 | - `php5.6-fpm`: 这是基础镜像 8 | - `ibbd/php-fpm`：用于生产环境。没有多余的插件，包括过时的插件（如mysql）和多余的插件（例如gd等） 9 | - `ibbd/php-fpm-ext`: 用于生产环境, 基于`ibbd/php-fpm`。包含一些项目可能需要用到的插件（例如mysql，gd等） 10 | - `ibbd/php-fpm-dev`: 用于测试环境及本地。在`ibbd/php-fpm-ext`的基础上包含一些测试工具等 11 | 12 | ## 更新记录 13 | 14 | ## PHP扩展 15 | 16 | iconv, pdo, tokenizer, mbstring: 已经包含在基础镜像里 17 | 18 | - gd 19 | - mcrypt 20 | - redis 21 | - mongo（已经不需要了） 22 | - mongodb 23 | - msgpack 24 | - zip 25 | - mysqli 26 | - imagick 27 | - mysql（有些旧代码居然还用这个！） 28 | 29 | 附加安装 30 | 31 | - composer（全局安装） 32 | - Laravel Installer: 文档https://laravel.com/docs/ 33 | - Lumen Installer: 文档https://lumen.laravel.com/docs/ 34 | 35 | ## 安装 36 | 37 | - Dockerfile: `sudo ./build.sh` 38 | - Pull: `sudo docker pull ibbd/php-fpm-ext` 39 | 40 | ## 使用 41 | 42 | ```sh 43 | # 代码目录 44 | code_path=/var/www 45 | 46 | # 日志目录 47 | logs_path=/var/log/php 48 | 49 | conf_path=$(pwd) 50 | conf_path=${conf_path%/*} 51 | docker run --name=ibbd-php-fpm -d \ 52 | -p 9000:9000 \ 53 | -v $code_path:/var/www \ 54 | -v $logs_path:/var/log/php \ 55 | -v $conf_path/conf/php.ini:/usr/local/etc/php/php.ini:ro \ 56 | -v $conf_path/conf/php-fpm.conf:/usr/local/etc/php-fpm.conf:ro \ 57 | ibbd/php-fpm-ext \ 58 | php-fpm -c /usr/local/etc/php/php.ini -y /usr/local/etc/php-fpm.conf 59 | ``` 60 | -------------------------------------------------------------------------------- /run.sh.example: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | # 需要重启nginx 3 | # 4 | 5 | #---------------------------------------- 6 | #------- 配置信息 BEGIN ----------------- 7 | #---------------------------------------- 8 | 9 | # 代码目录 10 | code_path=/var/www 11 | 12 | # 日志目录 13 | logs_path=/var/log/php 14 | 15 | #---------------------------------------- 16 | #------- 配置信息 END ------------------- 17 | #---------------------------------------- 18 | 19 | current_path=$(pwd) 20 | if [ ! -f $current_path/conf/php.ini ] 21 | then 22 | echo "ERROR: $current_path is error." 23 | exit 1 24 | fi 25 | 26 | sudo docker run --name=ibbd-php-fpm -d \ 27 | -p 9000:9000 \ 28 | -v $code_path:/var/www \ 29 | -v $logs_path:/var/log/php \ 30 | -v $current_path/conf/php.ini:/usr/local/etc/php/php.ini:ro \ 31 | -v $current_path/conf/php-fpm.conf:/usr/local/etc/php-fpm.conf:ro \ 32 | ibbd/php-fpm \ 33 | php-fpm -c /usr/local/etc/php/php.ini -y /usr/local/etc/php-fpm.conf 34 | 35 | sudo docker ps 36 | -------------------------------------------------------------------------------- /start.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | docker start ibbd-php-fpm 4 | docker ps 5 | 6 | -------------------------------------------------------------------------------- /test/Dockerfile: -------------------------------------------------------------------------------- 1 | # Pull base image. 2 | FROM ibbd/php-fpm 3 | 4 | MAINTAINER Alex Cai "cyy0523xc@gmail.com" 5 | 6 | WORKDIR /var/www 7 | 8 | RUN pecl install --force xhprof 9 | RUN docker-php-ext-install xhprof 10 | #RUN docker-php-ext-configure --enable-phpdbg 11 | #RUN docker-php-ext-enable phpdbg.so 12 | 13 | --------------------------------------------------------------------------------