├── allInOne.bat ├── Documents ├── store.pdn └── store.png ├── FS19_UnfinishedBales.zip ├── deploy.bat ├── FS19_UnfinishedBales ├── store.dds ├── unfinishedBalesConfig.xml ├── modDesc.xml ├── unfinishedBalesRegister.lua ├── unfinishedBales.lua └── mogliBase.lua ├── .gitattributes ├── .gitignore ├── README.md └── LICENSE /allInOne.bat: -------------------------------------------------------------------------------- 1 | @call build.bat 2 | @call deploy.bat -------------------------------------------------------------------------------- /Documents/store.pdn: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Mogli12/UnfinishedBales/HEAD/Documents/store.pdn -------------------------------------------------------------------------------- /Documents/store.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Mogli12/UnfinishedBales/HEAD/Documents/store.png -------------------------------------------------------------------------------- /FS19_UnfinishedBales.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Mogli12/UnfinishedBales/HEAD/FS19_UnfinishedBales.zip -------------------------------------------------------------------------------- /deploy.bat: -------------------------------------------------------------------------------- 1 | @echo "mods" 2 | @xcopy FS19_UnfinishedBales.zip "C:\Work\FarmingSimulator2019Mods" /R/U/Y/Q 3 | -------------------------------------------------------------------------------- /FS19_UnfinishedBales/store.dds: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Mogli12/UnfinishedBales/HEAD/FS19_UnfinishedBales/store.dds -------------------------------------------------------------------------------- /FS19_UnfinishedBales/unfinishedBalesConfig.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | -------------------------------------------------------------------------------- /.gitattributes: -------------------------------------------------------------------------------- 1 | # Auto detect text files and perform LF normalization 2 | * text=auto 3 | 4 | # Custom for Visual Studio 5 | *.cs diff=csharp 6 | *.sln merge=union 7 | *.csproj merge=union 8 | *.vbproj merge=union 9 | *.fsproj merge=union 10 | *.dbproj merge=union 11 | 12 | # Standard to msysgit 13 | *.doc diff=astextplain 14 | *.DOC diff=astextplain 15 | *.docx diff=astextplain 16 | *.DOCX diff=astextplain 17 | *.dot diff=astextplain 18 | *.DOT diff=astextplain 19 | *.pdf diff=astextplain 20 | *.PDF diff=astextplain 21 | *.rtf diff=astextplain 22 | *.RTF diff=astextplain 23 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Windows image file caches 2 | Thumbs.db 3 | ehthumbs.db 4 | 5 | # Folder config file 6 | Desktop.ini 7 | 8 | # Recycle Bin used on file shares 9 | $RECYCLE.BIN/ 10 | 11 | # Windows Installer files 12 | *.cab 13 | *.msi 14 | *.msm 15 | *.msp 16 | ~$*.* 17 | 18 | # ========================= 19 | # Operating System Files 20 | # ========================= 21 | 22 | # OSX 23 | # ========================= 24 | 25 | .DS_Store 26 | .AppleDouble 27 | .LSOverride 28 | 29 | # Icon must ends with two \r. 30 | Icon 31 | 32 | # Thumbnails 33 | ._* 34 | 35 | # Files that might appear on external disk 36 | .Spotlight-V100 37 | .Trashes 38 | -------------------------------------------------------------------------------- /FS19_UnfinishedBales/modDesc.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | mogli 4 | 5 | <en>Unfinished Bales</en> 6 | 7 | 8 | 11 | 14 | 17 | 18 | 19 | store.dds 20 | 1.0.0.0 21 | 22 | 23 | UnfinishedBales v1.0 24 | UnfinishedBales v1.0 25 | 26 | 27 | 28 | 29 | 30 | 31 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # UnfinishedBales for Farming Simulator 2019 2 | 3 | ## How to download? 4 | 5 | Just click here: [Latest version](https://github.com/Mogli12/UnfinishedBales/blob/master/FS19_UnfinishedBales.zip?raw=true) 6 | 7 | ## Motivation 8 | I found it annoying to drive until the baler had exaclty 100% fill level. This small script allows you to unload bales already at 75% fill level. 9 | 10 | ## Description 11 | 12 | ## Developer version 13 | Please be aware you're using a developer version, which may and will contain errors, bugs, mistakes and unfinished code. 14 | 15 | You have been warned. 16 | 17 | If you're still ok with this, please remember to post possible issues that you find in the developer version. 18 | That's the only way we can find sources of error and fix them. 19 | Be as specific as possible: 20 | 21 | * tell us the version number 22 | * only use the vehicles necessary, not 10 other ones at a time 23 | * which vehicles are involved, what is the intended action? 24 | * Post! The! Log! to [Gist](https://gist.github.com/) or [PasteBin](http://pastebin.com/) 25 | 26 | From today on I will close all new issues without the above information! 27 | 28 | ## Credits 29 | * Stefan Biedenstein 30 | -------------------------------------------------------------------------------- /FS19_UnfinishedBales/unfinishedBalesRegister.lua: -------------------------------------------------------------------------------- 1 | unfinishedBalesRegister = {}; 2 | unfinishedBalesRegister.g_currentModDirectory = g_currentModDirectory 3 | unfinishedBalesRegister.specName = "unfinishedBales" 4 | 5 | function unfinishedBalesRegister:beforeFinalizeVehicleTypes() 6 | 7 | if unfinishedBales == nil then 8 | print("Failed to add specialization unfinishedBales") 9 | else 10 | for k, typeDef in pairs(g_vehicleTypeManager.vehicleTypes) do 11 | if typeDef ~= nil and k ~= "locomotive" then 12 | local isBaler = false 13 | local isFillUnit = false 14 | local isNotModified = true 15 | for name, spec in pairs(typeDef.specializationsByName) do 16 | if name == "baler" then 17 | isBaler = true 18 | elseif name == "fillUnit" then 19 | isFillUnit = true 20 | elseif name == unfinishedBalesRegister.specName then 21 | isNotModified = false 22 | end 23 | end 24 | if isNotModified and isBaler and isFillUnit then 25 | print(" adding unfinishedBales to vehicleType '"..tostring(k).."'") 26 | typeDef.specializationsByName[unfinishedBalesRegister.specName] = unfinishedBales 27 | table.insert(typeDef.specializationNames, unfinishedBalesRegister.specName) 28 | table.insert(typeDef.specializations, unfinishedBales) 29 | end 30 | end 31 | end 32 | end 33 | end 34 | VehicleTypeManager.finalizeVehicleTypes = Utils.prependedFunction(VehicleTypeManager.finalizeVehicleTypes, unfinishedBalesRegister.beforeFinalizeVehicleTypes) 35 | 36 | function unfinishedBalesRegister:loadMap(name) 37 | print("--- loading "..g_i18n:getText("ubVERSION").." by mogli ---") 38 | 39 | g_i18n.texts["ubVERSION"] = g_i18n:getText("ubVERSION") 40 | end; 41 | 42 | function unfinishedBalesRegister:deleteMap() 43 | 44 | end; 45 | 46 | function unfinishedBalesRegister:keyEvent(unicode, sym, modifier, isDown) 47 | 48 | end; 49 | 50 | function unfinishedBalesRegister:mouseEvent(posX, posY, isDown, isUp, button) 51 | 52 | end; 53 | 54 | function unfinishedBalesRegister:update(dt) 55 | 56 | end; 57 | 58 | function unfinishedBalesRegister:draw() 59 | 60 | end; 61 | 62 | addModEventListener(unfinishedBalesRegister); -------------------------------------------------------------------------------- /FS19_UnfinishedBales/unfinishedBales.lua: -------------------------------------------------------------------------------- 1 | -- 2 | -- unfinishedBales 3 | -- This is the specialization for unfinishedBales 4 | -- 5 | 6 | --*************************************************************** 7 | source(Utils.getFilename("mogliBase.lua", g_currentModDirectory)) 8 | _G[g_currentModName..".mogliBase"].newClass( "unfinishedBales", "spec_unfinishedBales" ) 9 | --*************************************************************** 10 | 11 | function unfinishedBales.globalsReset( createIfMissing ) 12 | 13 | unfinishedBalesGlobals = {} 14 | 15 | unfinishedBalesGlobals.minFillLevel = 0.0 16 | 17 | unfinishedBalesGlobals.debug = false 18 | 19 | local file 20 | file = unfinishedBales.baseDirectory.."unfinishedBalesConfig.xml" 21 | if fileExists(file) then 22 | unfinishedBales.globalsLoad( file, "unfinishedBalesGlobals", unfinishedBalesGlobals ) 23 | else 24 | print("ERROR: NO GLOBALS IN "..file) 25 | end 26 | 27 | file = getUserProfileAppPath().. "modsSettings/FS19_UnfinishedBales/config.xml" 28 | if fileExists(file) then 29 | print('Loading "'..file..'"...') 30 | unfinishedBales.globalsLoad( file, "unfinishedBalesGlobals", unfinishedBalesGlobals ) 31 | end 32 | 33 | unfinishedBalesGlobals.mathPi2 = 0.5 * math.pi 34 | end 35 | 36 | unfinishedBales.globalsReset( false ) 37 | 38 | function unfinishedBales.debugPrint( ... ) 39 | if unfinishedBalesGlobals.debug then 40 | print( ... ) 41 | end 42 | end 43 | 44 | function unfinishedBales.prerequisitesPresent(specializations) 45 | return true 46 | end 47 | 48 | function unfinishedBales.registerEventListeners(vehicleType) 49 | SpecializationUtil.registerEventListener(vehicleType, "onUpdate", unfinishedBales) 50 | end 51 | 52 | --*************************************************************** 53 | -- onUpdate 54 | --*************************************************************** 55 | function unfinishedBales:onUpdate(dt) 56 | local baler = self.spec_baler 57 | local fillUnit = self.spec_fillUnit 58 | local spec = self.spec_unfinishedBales 59 | 60 | if baler == nil then 61 | return 62 | end 63 | 64 | local c = self:getFillUnitCapacity( baler.fillUnitIndex ) 65 | if c ~= nil then 66 | if not ( baler.canUnloadUnfinishedBale ) then 67 | if spec.canUnloadUnfinishedBale == nil then 68 | spec.unfinishedBalesApplied = true 69 | spec.canUnloadUnfinishedBale = false 70 | spec.unfinishedBaleThreshold = baler.unfinishedBaleThreshold 71 | end 72 | end 73 | if spec.unfinishedBalesApplied then 74 | baler.canUnloadUnfinishedBale = true 75 | baler.unfinishedBaleThreshold = unfinishedBalesGlobals.minFillLevel * c 76 | end 77 | end 78 | end 79 | 80 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | GNU GENERAL PUBLIC LICENSE 2 | Version 3, 29 June 2007 3 | 4 | Copyright (C) 2007 Free Software Foundation, Inc. 5 | Everyone is permitted to copy and distribute verbatim copies 6 | of this license document, but changing it is not allowed. 7 | 8 | Preamble 9 | 10 | The GNU General Public License is a free, copyleft license for 11 | software and other kinds of works. 12 | 13 | The licenses for most software and other practical works are designed 14 | to take away your freedom to share and change the works. By contrast, 15 | the GNU General Public License is intended to guarantee your freedom to 16 | share and change all versions of a program--to make sure it remains free 17 | software for all its users. We, the Free Software Foundation, use the 18 | GNU General Public License for most of our software; it applies also to 19 | any other work released this way by its authors. You can apply it to 20 | your programs, too. 21 | 22 | When we speak of free software, we are referring to freedom, not 23 | price. Our General Public Licenses are designed to make sure that you 24 | have the freedom to distribute copies of free software (and charge for 25 | them if you wish), that you receive source code or can get it if you 26 | want it, that you can change the software or use pieces of it in new 27 | free programs, and that you know you can do these things. 28 | 29 | To protect your rights, we need to prevent others from denying you 30 | these rights or asking you to surrender the rights. Therefore, you have 31 | certain responsibilities if you distribute copies of the software, or if 32 | you modify it: responsibilities to respect the freedom of others. 33 | 34 | For example, if you distribute copies of such a program, whether 35 | gratis or for a fee, you must pass on to the recipients the same 36 | freedoms that you received. You must make sure that they, too, receive 37 | or can get the source code. And you must show them these terms so they 38 | know their rights. 39 | 40 | Developers that use the GNU GPL protect your rights with two steps: 41 | (1) assert copyright on the software, and (2) offer you this License 42 | giving you legal permission to copy, distribute and/or modify it. 43 | 44 | For the developers' and authors' protection, the GPL clearly explains 45 | that there is no warranty for this free software. For both users' and 46 | authors' sake, the GPL requires that modified versions be marked as 47 | changed, so that their problems will not be attributed erroneously to 48 | authors of previous versions. 49 | 50 | Some devices are designed to deny users access to install or run 51 | modified versions of the software inside them, although the manufacturer 52 | can do so. This is fundamentally incompatible with the aim of 53 | protecting users' freedom to change the software. The systematic 54 | pattern of such abuse occurs in the area of products for individuals to 55 | use, which is precisely where it is most unacceptable. Therefore, we 56 | have designed this version of the GPL to prohibit the practice for those 57 | products. If such problems arise substantially in other domains, we 58 | stand ready to extend this provision to those domains in future versions 59 | of the GPL, as needed to protect the freedom of users. 60 | 61 | Finally, every program is threatened constantly by software patents. 62 | States should not allow patents to restrict development and use of 63 | software on general-purpose computers, but in those that do, we wish to 64 | avoid the special danger that patents applied to a free program could 65 | make it effectively proprietary. To prevent this, the GPL assures that 66 | patents cannot be used to render the program non-free. 67 | 68 | The precise terms and conditions for copying, distribution and 69 | modification follow. 70 | 71 | TERMS AND CONDITIONS 72 | 73 | 0. Definitions. 74 | 75 | "This License" refers to version 3 of the GNU General Public License. 76 | 77 | "Copyright" also means copyright-like laws that apply to other kinds of 78 | works, such as semiconductor masks. 79 | 80 | "The Program" refers to any copyrightable work licensed under this 81 | License. Each licensee is addressed as "you". "Licensees" and 82 | "recipients" may be individuals or organizations. 83 | 84 | To "modify" a work means to copy from or adapt all or part of the work 85 | in a fashion requiring copyright permission, other than the making of an 86 | exact copy. The resulting work is called a "modified version" of the 87 | earlier work or a work "based on" the earlier work. 88 | 89 | A "covered work" means either the unmodified Program or a work based 90 | on the Program. 91 | 92 | To "propagate" a work means to do anything with it that, without 93 | permission, would make you directly or secondarily liable for 94 | infringement under applicable copyright law, except executing it on a 95 | computer or modifying a private copy. Propagation includes copying, 96 | distribution (with or without modification), making available to the 97 | public, and in some countries other activities as well. 98 | 99 | To "convey" a work means any kind of propagation that enables other 100 | parties to make or receive copies. Mere interaction with a user through 101 | a computer network, with no transfer of a copy, is not conveying. 102 | 103 | An interactive user interface displays "Appropriate Legal Notices" 104 | to the extent that it includes a convenient and prominently visible 105 | feature that (1) displays an appropriate copyright notice, and (2) 106 | tells the user that there is no warranty for the work (except to the 107 | extent that warranties are provided), that licensees may convey the 108 | work under this License, and how to view a copy of this License. If 109 | the interface presents a list of user commands or options, such as a 110 | menu, a prominent item in the list meets this criterion. 111 | 112 | 1. Source Code. 113 | 114 | The "source code" for a work means the preferred form of the work 115 | for making modifications to it. "Object code" means any non-source 116 | form of a work. 117 | 118 | A "Standard Interface" means an interface that either is an official 119 | standard defined by a recognized standards body, or, in the case of 120 | interfaces specified for a particular programming language, one that 121 | is widely used among developers working in that language. 122 | 123 | The "System Libraries" of an executable work include anything, other 124 | than the work as a whole, that (a) is included in the normal form of 125 | packaging a Major Component, but which is not part of that Major 126 | Component, and (b) serves only to enable use of the work with that 127 | Major Component, or to implement a Standard Interface for which an 128 | implementation is available to the public in source code form. A 129 | "Major Component", in this context, means a major essential component 130 | (kernel, window system, and so on) of the specific operating system 131 | (if any) on which the executable work runs, or a compiler used to 132 | produce the work, or an object code interpreter used to run it. 133 | 134 | The "Corresponding Source" for a work in object code form means all 135 | the source code needed to generate, install, and (for an executable 136 | work) run the object code and to modify the work, including scripts to 137 | control those activities. However, it does not include the work's 138 | System Libraries, or general-purpose tools or generally available free 139 | programs which are used unmodified in performing those activities but 140 | which are not part of the work. For example, Corresponding Source 141 | includes interface definition files associated with source files for 142 | the work, and the source code for shared libraries and dynamically 143 | linked subprograms that the work is specifically designed to require, 144 | such as by intimate data communication or control flow between those 145 | subprograms and other parts of the work. 146 | 147 | The Corresponding Source need not include anything that users 148 | can regenerate automatically from other parts of the Corresponding 149 | Source. 150 | 151 | The Corresponding Source for a work in source code form is that 152 | same work. 153 | 154 | 2. Basic Permissions. 155 | 156 | All rights granted under this License are granted for the term of 157 | copyright on the Program, and are irrevocable provided the stated 158 | conditions are met. This License explicitly affirms your unlimited 159 | permission to run the unmodified Program. The output from running a 160 | covered work is covered by this License only if the output, given its 161 | content, constitutes a covered work. This License acknowledges your 162 | rights of fair use or other equivalent, as provided by copyright law. 163 | 164 | You may make, run and propagate covered works that you do not 165 | convey, without conditions so long as your license otherwise remains 166 | in force. You may convey covered works to others for the sole purpose 167 | of having them make modifications exclusively for you, or provide you 168 | with facilities for running those works, provided that you comply with 169 | the terms of this License in conveying all material for which you do 170 | not control copyright. Those thus making or running the covered works 171 | for you must do so exclusively on your behalf, under your direction 172 | and control, on terms that prohibit them from making any copies of 173 | your copyrighted material outside their relationship with you. 174 | 175 | Conveying under any other circumstances is permitted solely under 176 | the conditions stated below. Sublicensing is not allowed; section 10 177 | makes it unnecessary. 178 | 179 | 3. Protecting Users' Legal Rights From Anti-Circumvention Law. 180 | 181 | No covered work shall be deemed part of an effective technological 182 | measure under any applicable law fulfilling obligations under article 183 | 11 of the WIPO copyright treaty adopted on 20 December 1996, or 184 | similar laws prohibiting or restricting circumvention of such 185 | measures. 186 | 187 | When you convey a covered work, you waive any legal power to forbid 188 | circumvention of technological measures to the extent such circumvention 189 | is effected by exercising rights under this License with respect to 190 | the covered work, and you disclaim any intention to limit operation or 191 | modification of the work as a means of enforcing, against the work's 192 | users, your or third parties' legal rights to forbid circumvention of 193 | technological measures. 194 | 195 | 4. Conveying Verbatim Copies. 196 | 197 | You may convey verbatim copies of the Program's source code as you 198 | receive it, in any medium, provided that you conspicuously and 199 | appropriately publish on each copy an appropriate copyright notice; 200 | keep intact all notices stating that this License and any 201 | non-permissive terms added in accord with section 7 apply to the code; 202 | keep intact all notices of the absence of any warranty; and give all 203 | recipients a copy of this License along with the Program. 204 | 205 | You may charge any price or no price for each copy that you convey, 206 | and you may offer support or warranty protection for a fee. 207 | 208 | 5. Conveying Modified Source Versions. 209 | 210 | You may convey a work based on the Program, or the modifications to 211 | produce it from the Program, in the form of source code under the 212 | terms of section 4, provided that you also meet all of these conditions: 213 | 214 | a) The work must carry prominent notices stating that you modified 215 | it, and giving a relevant date. 216 | 217 | b) The work must carry prominent notices stating that it is 218 | released under this License and any conditions added under section 219 | 7. This requirement modifies the requirement in section 4 to 220 | "keep intact all notices". 221 | 222 | c) You must license the entire work, as a whole, under this 223 | License to anyone who comes into possession of a copy. This 224 | License will therefore apply, along with any applicable section 7 225 | additional terms, to the whole of the work, and all its parts, 226 | regardless of how they are packaged. This License gives no 227 | permission to license the work in any other way, but it does not 228 | invalidate such permission if you have separately received it. 229 | 230 | d) If the work has interactive user interfaces, each must display 231 | Appropriate Legal Notices; however, if the Program has interactive 232 | interfaces that do not display Appropriate Legal Notices, your 233 | work need not make them do so. 234 | 235 | A compilation of a covered work with other separate and independent 236 | works, which are not by their nature extensions of the covered work, 237 | and which are not combined with it such as to form a larger program, 238 | in or on a volume of a storage or distribution medium, is called an 239 | "aggregate" if the compilation and its resulting copyright are not 240 | used to limit the access or legal rights of the compilation's users 241 | beyond what the individual works permit. Inclusion of a covered work 242 | in an aggregate does not cause this License to apply to the other 243 | parts of the aggregate. 244 | 245 | 6. Conveying Non-Source Forms. 246 | 247 | You may convey a covered work in object code form under the terms 248 | of sections 4 and 5, provided that you also convey the 249 | machine-readable Corresponding Source under the terms of this License, 250 | in one of these ways: 251 | 252 | a) Convey the object code in, or embodied in, a physical product 253 | (including a physical distribution medium), accompanied by the 254 | Corresponding Source fixed on a durable physical medium 255 | customarily used for software interchange. 256 | 257 | b) Convey the object code in, or embodied in, a physical product 258 | (including a physical distribution medium), accompanied by a 259 | written offer, valid for at least three years and valid for as 260 | long as you offer spare parts or customer support for that product 261 | model, to give anyone who possesses the object code either (1) a 262 | copy of the Corresponding Source for all the software in the 263 | product that is covered by this License, on a durable physical 264 | medium customarily used for software interchange, for a price no 265 | more than your reasonable cost of physically performing this 266 | conveying of source, or (2) access to copy the 267 | Corresponding Source from a network server at no charge. 268 | 269 | c) Convey individual copies of the object code with a copy of the 270 | written offer to provide the Corresponding Source. This 271 | alternative is allowed only occasionally and noncommercially, and 272 | only if you received the object code with such an offer, in accord 273 | with subsection 6b. 274 | 275 | d) Convey the object code by offering access from a designated 276 | place (gratis or for a charge), and offer equivalent access to the 277 | Corresponding Source in the same way through the same place at no 278 | further charge. You need not require recipients to copy the 279 | Corresponding Source along with the object code. If the place to 280 | copy the object code is a network server, the Corresponding Source 281 | may be on a different server (operated by you or a third party) 282 | that supports equivalent copying facilities, provided you maintain 283 | clear directions next to the object code saying where to find the 284 | Corresponding Source. Regardless of what server hosts the 285 | Corresponding Source, you remain obligated to ensure that it is 286 | available for as long as needed to satisfy these requirements. 287 | 288 | e) Convey the object code using peer-to-peer transmission, provided 289 | you inform other peers where the object code and Corresponding 290 | Source of the work are being offered to the general public at no 291 | charge under subsection 6d. 292 | 293 | A separable portion of the object code, whose source code is excluded 294 | from the Corresponding Source as a System Library, need not be 295 | included in conveying the object code work. 296 | 297 | A "User Product" is either (1) a "consumer product", which means any 298 | tangible personal property which is normally used for personal, family, 299 | or household purposes, or (2) anything designed or sold for incorporation 300 | into a dwelling. In determining whether a product is a consumer product, 301 | doubtful cases shall be resolved in favor of coverage. For a particular 302 | product received by a particular user, "normally used" refers to a 303 | typical or common use of that class of product, regardless of the status 304 | of the particular user or of the way in which the particular user 305 | actually uses, or expects or is expected to use, the product. A product 306 | is a consumer product regardless of whether the product has substantial 307 | commercial, industrial or non-consumer uses, unless such uses represent 308 | the only significant mode of use of the product. 309 | 310 | "Installation Information" for a User Product means any methods, 311 | procedures, authorization keys, or other information required to install 312 | and execute modified versions of a covered work in that User Product from 313 | a modified version of its Corresponding Source. The information must 314 | suffice to ensure that the continued functioning of the modified object 315 | code is in no case prevented or interfered with solely because 316 | modification has been made. 317 | 318 | If you convey an object code work under this section in, or with, or 319 | specifically for use in, a User Product, and the conveying occurs as 320 | part of a transaction in which the right of possession and use of the 321 | User Product is transferred to the recipient in perpetuity or for a 322 | fixed term (regardless of how the transaction is characterized), the 323 | Corresponding Source conveyed under this section must be accompanied 324 | by the Installation Information. But this requirement does not apply 325 | if neither you nor any third party retains the ability to install 326 | modified object code on the User Product (for example, the work has 327 | been installed in ROM). 328 | 329 | The requirement to provide Installation Information does not include a 330 | requirement to continue to provide support service, warranty, or updates 331 | for a work that has been modified or installed by the recipient, or for 332 | the User Product in which it has been modified or installed. Access to a 333 | network may be denied when the modification itself materially and 334 | adversely affects the operation of the network or violates the rules and 335 | protocols for communication across the network. 336 | 337 | Corresponding Source conveyed, and Installation Information provided, 338 | in accord with this section must be in a format that is publicly 339 | documented (and with an implementation available to the public in 340 | source code form), and must require no special password or key for 341 | unpacking, reading or copying. 342 | 343 | 7. Additional Terms. 344 | 345 | "Additional permissions" are terms that supplement the terms of this 346 | License by making exceptions from one or more of its conditions. 347 | Additional permissions that are applicable to the entire Program shall 348 | be treated as though they were included in this License, to the extent 349 | that they are valid under applicable law. If additional permissions 350 | apply only to part of the Program, that part may be used separately 351 | under those permissions, but the entire Program remains governed by 352 | this License without regard to the additional permissions. 353 | 354 | When you convey a copy of a covered work, you may at your option 355 | remove any additional permissions from that copy, or from any part of 356 | it. (Additional permissions may be written to require their own 357 | removal in certain cases when you modify the work.) You may place 358 | additional permissions on material, added by you to a covered work, 359 | for which you have or can give appropriate copyright permission. 360 | 361 | Notwithstanding any other provision of this License, for material you 362 | add to a covered work, you may (if authorized by the copyright holders of 363 | that material) supplement the terms of this License with terms: 364 | 365 | a) Disclaiming warranty or limiting liability differently from the 366 | terms of sections 15 and 16 of this License; or 367 | 368 | b) Requiring preservation of specified reasonable legal notices or 369 | author attributions in that material or in the Appropriate Legal 370 | Notices displayed by works containing it; or 371 | 372 | c) Prohibiting misrepresentation of the origin of that material, or 373 | requiring that modified versions of such material be marked in 374 | reasonable ways as different from the original version; or 375 | 376 | d) Limiting the use for publicity purposes of names of licensors or 377 | authors of the material; or 378 | 379 | e) Declining to grant rights under trademark law for use of some 380 | trade names, trademarks, or service marks; or 381 | 382 | f) Requiring indemnification of licensors and authors of that 383 | material by anyone who conveys the material (or modified versions of 384 | it) with contractual assumptions of liability to the recipient, for 385 | any liability that these contractual assumptions directly impose on 386 | those licensors and authors. 387 | 388 | All other non-permissive additional terms are considered "further 389 | restrictions" within the meaning of section 10. If the Program as you 390 | received it, or any part of it, contains a notice stating that it is 391 | governed by this License along with a term that is a further 392 | restriction, you may remove that term. If a license document contains 393 | a further restriction but permits relicensing or conveying under this 394 | License, you may add to a covered work material governed by the terms 395 | of that license document, provided that the further restriction does 396 | not survive such relicensing or conveying. 397 | 398 | If you add terms to a covered work in accord with this section, you 399 | must place, in the relevant source files, a statement of the 400 | additional terms that apply to those files, or a notice indicating 401 | where to find the applicable terms. 402 | 403 | Additional terms, permissive or non-permissive, may be stated in the 404 | form of a separately written license, or stated as exceptions; 405 | the above requirements apply either way. 406 | 407 | 8. Termination. 408 | 409 | You may not propagate or modify a covered work except as expressly 410 | provided under this License. Any attempt otherwise to propagate or 411 | modify it is void, and will automatically terminate your rights under 412 | this License (including any patent licenses granted under the third 413 | paragraph of section 11). 414 | 415 | However, if you cease all violation of this License, then your 416 | license from a particular copyright holder is reinstated (a) 417 | provisionally, unless and until the copyright holder explicitly and 418 | finally terminates your license, and (b) permanently, if the copyright 419 | holder fails to notify you of the violation by some reasonable means 420 | prior to 60 days after the cessation. 421 | 422 | Moreover, your license from a particular copyright holder is 423 | reinstated permanently if the copyright holder notifies you of the 424 | violation by some reasonable means, this is the first time you have 425 | received notice of violation of this License (for any work) from that 426 | copyright holder, and you cure the violation prior to 30 days after 427 | your receipt of the notice. 428 | 429 | Termination of your rights under this section does not terminate the 430 | licenses of parties who have received copies or rights from you under 431 | this License. If your rights have been terminated and not permanently 432 | reinstated, you do not qualify to receive new licenses for the same 433 | material under section 10. 434 | 435 | 9. Acceptance Not Required for Having Copies. 436 | 437 | You are not required to accept this License in order to receive or 438 | run a copy of the Program. Ancillary propagation of a covered work 439 | occurring solely as a consequence of using peer-to-peer transmission 440 | to receive a copy likewise does not require acceptance. However, 441 | nothing other than this License grants you permission to propagate or 442 | modify any covered work. These actions infringe copyright if you do 443 | not accept this License. Therefore, by modifying or propagating a 444 | covered work, you indicate your acceptance of this License to do so. 445 | 446 | 10. Automatic Licensing of Downstream Recipients. 447 | 448 | Each time you convey a covered work, the recipient automatically 449 | receives a license from the original licensors, to run, modify and 450 | propagate that work, subject to this License. You are not responsible 451 | for enforcing compliance by third parties with this License. 452 | 453 | An "entity transaction" is a transaction transferring control of an 454 | organization, or substantially all assets of one, or subdividing an 455 | organization, or merging organizations. If propagation of a covered 456 | work results from an entity transaction, each party to that 457 | transaction who receives a copy of the work also receives whatever 458 | licenses to the work the party's predecessor in interest had or could 459 | give under the previous paragraph, plus a right to possession of the 460 | Corresponding Source of the work from the predecessor in interest, if 461 | the predecessor has it or can get it with reasonable efforts. 462 | 463 | You may not impose any further restrictions on the exercise of the 464 | rights granted or affirmed under this License. For example, you may 465 | not impose a license fee, royalty, or other charge for exercise of 466 | rights granted under this License, and you may not initiate litigation 467 | (including a cross-claim or counterclaim in a lawsuit) alleging that 468 | any patent claim is infringed by making, using, selling, offering for 469 | sale, or importing the Program or any portion of it. 470 | 471 | 11. Patents. 472 | 473 | A "contributor" is a copyright holder who authorizes use under this 474 | License of the Program or a work on which the Program is based. The 475 | work thus licensed is called the contributor's "contributor version". 476 | 477 | A contributor's "essential patent claims" are all patent claims 478 | owned or controlled by the contributor, whether already acquired or 479 | hereafter acquired, that would be infringed by some manner, permitted 480 | by this License, of making, using, or selling its contributor version, 481 | but do not include claims that would be infringed only as a 482 | consequence of further modification of the contributor version. For 483 | purposes of this definition, "control" includes the right to grant 484 | patent sublicenses in a manner consistent with the requirements of 485 | this License. 486 | 487 | Each contributor grants you a non-exclusive, worldwide, royalty-free 488 | patent license under the contributor's essential patent claims, to 489 | make, use, sell, offer for sale, import and otherwise run, modify and 490 | propagate the contents of its contributor version. 491 | 492 | In the following three paragraphs, a "patent license" is any express 493 | agreement or commitment, however denominated, not to enforce a patent 494 | (such as an express permission to practice a patent or covenant not to 495 | sue for patent infringement). To "grant" such a patent license to a 496 | party means to make such an agreement or commitment not to enforce a 497 | patent against the party. 498 | 499 | If you convey a covered work, knowingly relying on a patent license, 500 | and the Corresponding Source of the work is not available for anyone 501 | to copy, free of charge and under the terms of this License, through a 502 | publicly available network server or other readily accessible means, 503 | then you must either (1) cause the Corresponding Source to be so 504 | available, or (2) arrange to deprive yourself of the benefit of the 505 | patent license for this particular work, or (3) arrange, in a manner 506 | consistent with the requirements of this License, to extend the patent 507 | license to downstream recipients. "Knowingly relying" means you have 508 | actual knowledge that, but for the patent license, your conveying the 509 | covered work in a country, or your recipient's use of the covered work 510 | in a country, would infringe one or more identifiable patents in that 511 | country that you have reason to believe are valid. 512 | 513 | If, pursuant to or in connection with a single transaction or 514 | arrangement, you convey, or propagate by procuring conveyance of, a 515 | covered work, and grant a patent license to some of the parties 516 | receiving the covered work authorizing them to use, propagate, modify 517 | or convey a specific copy of the covered work, then the patent license 518 | you grant is automatically extended to all recipients of the covered 519 | work and works based on it. 520 | 521 | A patent license is "discriminatory" if it does not include within 522 | the scope of its coverage, prohibits the exercise of, or is 523 | conditioned on the non-exercise of one or more of the rights that are 524 | specifically granted under this License. You may not convey a covered 525 | work if you are a party to an arrangement with a third party that is 526 | in the business of distributing software, under which you make payment 527 | to the third party based on the extent of your activity of conveying 528 | the work, and under which the third party grants, to any of the 529 | parties who would receive the covered work from you, a discriminatory 530 | patent license (a) in connection with copies of the covered work 531 | conveyed by you (or copies made from those copies), or (b) primarily 532 | for and in connection with specific products or compilations that 533 | contain the covered work, unless you entered into that arrangement, 534 | or that patent license was granted, prior to 28 March 2007. 535 | 536 | Nothing in this License shall be construed as excluding or limiting 537 | any implied license or other defenses to infringement that may 538 | otherwise be available to you under applicable patent law. 539 | 540 | 12. No Surrender of Others' Freedom. 541 | 542 | If conditions are imposed on you (whether by court order, agreement or 543 | otherwise) that contradict the conditions of this License, they do not 544 | excuse you from the conditions of this License. If you cannot convey a 545 | covered work so as to satisfy simultaneously your obligations under this 546 | License and any other pertinent obligations, then as a consequence you may 547 | not convey it at all. For example, if you agree to terms that obligate you 548 | to collect a royalty for further conveying from those to whom you convey 549 | the Program, the only way you could satisfy both those terms and this 550 | License would be to refrain entirely from conveying the Program. 551 | 552 | 13. Use with the GNU Affero General Public License. 553 | 554 | Notwithstanding any other provision of this License, you have 555 | permission to link or combine any covered work with a work licensed 556 | under version 3 of the GNU Affero General Public License into a single 557 | combined work, and to convey the resulting work. The terms of this 558 | License will continue to apply to the part which is the covered work, 559 | but the special requirements of the GNU Affero General Public License, 560 | section 13, concerning interaction through a network will apply to the 561 | combination as such. 562 | 563 | 14. Revised Versions of this License. 564 | 565 | The Free Software Foundation may publish revised and/or new versions of 566 | the GNU General Public License from time to time. Such new versions will 567 | be similar in spirit to the present version, but may differ in detail to 568 | address new problems or concerns. 569 | 570 | Each version is given a distinguishing version number. If the 571 | Program specifies that a certain numbered version of the GNU General 572 | Public License "or any later version" applies to it, you have the 573 | option of following the terms and conditions either of that numbered 574 | version or of any later version published by the Free Software 575 | Foundation. If the Program does not specify a version number of the 576 | GNU General Public License, you may choose any version ever published 577 | by the Free Software Foundation. 578 | 579 | If the Program specifies that a proxy can decide which future 580 | versions of the GNU General Public License can be used, that proxy's 581 | public statement of acceptance of a version permanently authorizes you 582 | to choose that version for the Program. 583 | 584 | Later license versions may give you additional or different 585 | permissions. However, no additional obligations are imposed on any 586 | author or copyright holder as a result of your choosing to follow a 587 | later version. 588 | 589 | 15. Disclaimer of Warranty. 590 | 591 | THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY 592 | APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT 593 | HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY 594 | OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 595 | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 596 | PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM 597 | IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF 598 | ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 599 | 600 | 16. Limitation of Liability. 601 | 602 | IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING 603 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS 604 | THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY 605 | GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 606 | USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 607 | DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD 608 | PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 609 | EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 610 | SUCH DAMAGES. 611 | 612 | 17. Interpretation of Sections 15 and 16. 613 | 614 | If the disclaimer of warranty and limitation of liability provided 615 | above cannot be given local legal effect according to their terms, 616 | reviewing courts shall apply local law that most closely approximates 617 | an absolute waiver of all civil liability in connection with the 618 | Program, unless a warranty or assumption of liability accompanies a 619 | copy of the Program in return for a fee. 620 | 621 | END OF TERMS AND CONDITIONS 622 | 623 | How to Apply These Terms to Your New Programs 624 | 625 | If you develop a new program, and you want it to be of the greatest 626 | possible use to the public, the best way to achieve this is to make it 627 | free software which everyone can redistribute and change under these terms. 628 | 629 | To do so, attach the following notices to the program. It is safest 630 | to attach them to the start of each source file to most effectively 631 | state the exclusion of warranty; and each file should have at least 632 | the "copyright" line and a pointer to where the full notice is found. 633 | 634 | 635 | Copyright (C) 636 | 637 | This program is free software: you can redistribute it and/or modify 638 | it under the terms of the GNU General Public License as published by 639 | the Free Software Foundation, either version 3 of the License, or 640 | (at your option) any later version. 641 | 642 | This program is distributed in the hope that it will be useful, 643 | but WITHOUT ANY WARRANTY; without even the implied warranty of 644 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 645 | GNU General Public License for more details. 646 | 647 | You should have received a copy of the GNU General Public License 648 | along with this program. If not, see . 649 | 650 | Also add information on how to contact you by electronic and paper mail. 651 | 652 | If the program does terminal interaction, make it output a short 653 | notice like this when it starts in an interactive mode: 654 | 655 | Copyright (C) 656 | This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 657 | This is free software, and you are welcome to redistribute it 658 | under certain conditions; type `show c' for details. 659 | 660 | The hypothetical commands `show w' and `show c' should show the appropriate 661 | parts of the General Public License. Of course, your program's commands 662 | might be different; for a GUI interface, you would use an "about box". 663 | 664 | You should also get your employer (if you work as a programmer) or school, 665 | if any, to sign a "copyright disclaimer" for the program, if necessary. 666 | For more information on this, and how to apply and follow the GNU GPL, see 667 | . 668 | 669 | The GNU General Public License does not permit incorporating your program 670 | into proprietary programs. If your program is a subroutine library, you 671 | may consider it more useful to permit linking proprietary applications with 672 | the library. If this is what you want to do, use the GNU Lesser General 673 | Public License instead of this License. But first, please read 674 | . -------------------------------------------------------------------------------- /FS19_UnfinishedBales/mogliBase.lua: -------------------------------------------------------------------------------- 1 | -- 2 | -- mogliBasics 3 | -- This is the specialization for mogliBasics 4 | -- 5 | -- change log 6 | -- 2.01 initial 2.0 version 7 | -- 2.02 bug fix .../mogliBase30.lua:326: attempt to index field 'mbConfigHandler20' (a nil value) 8 | -- 2.03 bug fix forgot to rename mogliBase201Event 9 | -- 2.04 getText with default text 10 | -- 3.01 initial 3.0 version: use g_currentModDirectory as part of the class name 11 | -- 3.02 bug fix local functions / use local class instead 12 | -- 3.03 input binding: check if shift/alt/crtl is pressed 13 | -- 3.04 hide warnings of missing input bindings 14 | -- 3.05 string support in globalsLoad 15 | -- 3.06 degrees support in globalsLoad 16 | -- 3.10 FS17 version 17 | -- 3.11 postLoad to load old savegame 18 | -- 3.12 getUiScale 19 | -- 3.13 getUiScale (2) 20 | -- 3.14 printCallStack 21 | -- 3.15 more robust event handling 22 | -- 3.16 show call stack if self.object is invalid 23 | -- 3.17 log output in globalsLoad 24 | -- 3.18 sync events instead of readStream / writeStream 25 | -- 3.19 missing syncs in SP and MP 26 | -- 3.20 WARNING: undefined input in gearboxMogli: 27 | -- 4.00 FS19 28 | -- 4.01 problem with events 29 | 30 | -- Usage: source(Utils.getFilename("mogliBase.lua", g_currentModDirectory)); 31 | -- _G[g_currentModDirectory.."mogliBase"].newClass( "AutoCombine", "acParameters" ) 32 | 33 | local mogliBaseVersion = 4.01 34 | local mogliBaseClass = g_currentModName..".mogliBase" 35 | local mogliEventClass = g_currentModName..".mogliEvent" 36 | local mogliSyncRequest = g_currentModName..".mogliSyncRequest" 37 | local mogliSyncReply = g_currentModName..".mogliSyncReply" 38 | --local mogliEventClass_mt = g_currentModDirectory.."mogliEvent_mt" 39 | 40 | if _G[mogliBaseClass] ~= nil and _G[mogliBaseClass].version ~= nil and _G[mogliBaseClass].version >= mogliBaseVersion then 41 | print("Factory class "..tostring(mogliBaseClass).." already exists in version "..tostring(_G[mogliBaseClass].version)) 42 | else 43 | local mogliBase30 = {} 44 | 45 | mogliBase30.version = mogliBaseVersion 46 | 47 | --print(mogliBaseClass..", version "..tostring(mogliBase30.version)..", located in "..g_currentModDirectory) 48 | 49 | --======================================================================================= 50 | -- class mogliBase30Event 51 | --======================================================================================= 52 | local mogliBase30Event = {} 53 | local mogliBase30Request = {} 54 | local mogliBase30Reply = {} 55 | 56 | --======================================================================================= 57 | -- mogliBase30.checkForKeyModifiers 58 | --======================================================================================= 59 | function mogliBase30.checkForKeyModifiers( keys ) 60 | local modifiers = {} 61 | for keyId,bool in pairs( Input.keyIdIsModifier ) do 62 | modifiers[keyId] = true 63 | end 64 | for _, keyId in pairs(keys) do 65 | modifiers[keyId] = false 66 | end 67 | for keyId,bool in pairs(modifiers) do 68 | if bool and Input.isKeyPressed( keyId ) then 69 | --print("Modifier is pressed: "..tostring(Input.keyIdToIdName[keyId])) 70 | return false 71 | end 72 | end 73 | return true 74 | end 75 | 76 | --======================================================================================= 77 | -- mogliBase30.newclass 78 | --======================================================================================= 79 | function mogliBase30.newClass( _globalClassName_, _level0_ ) 80 | local _newClass_ = {} 81 | 82 | --print("Creating new global class in "..g_currentModDirectory.." with name ".._globalClassName_..". Prefix is: "..tostring(_level0_)) 83 | 84 | _newClass_.baseDirectory = g_currentModDirectory 85 | _newClass_.modsDirectory = g_modsDirectory.."/" 86 | 87 | --******************************** 88 | -- globalsReset 89 | --******************************** 90 | function _newClass_.globalsReset( createIfMissing ) 91 | end 92 | 93 | --******************************** 94 | -- globalsLoad 95 | --******************************** 96 | function _newClass_.globalsLoad( file , rootTag, globals, writeLog ) 97 | local xmlFile = loadXMLFile( "mogliBasics", file, rootTag ) 98 | _newClass_.globalsLoad2( xmlFile , rootTag, globals, writeLog ) 99 | end 100 | 101 | --******************************** 102 | -- globalsLoad2 103 | --******************************** 104 | function _newClass_.globalsLoad2( xmlFile , rootTag, globals, writeLog ) 105 | 106 | local wl = true 107 | for name,value in pairs(globals) do 108 | local tp = getXMLString(xmlFile, rootTag.."." .. name .. "#type") 109 | local tm = 1 110 | if tp == nil then 111 | tm = 0 112 | elseif tp == "bool" then 113 | local bool = getXMLBool( xmlFile, rootTag.."." .. name .. "#value" ) 114 | if bool ~= nil then 115 | globals[name] = bool 116 | end 117 | elseif tp == "float" then 118 | local float = getXMLFloat( xmlFile, rootTag.."." .. name .. "#value" ) 119 | if float ~= nil then globals[name] = float end 120 | -- print(file..": "..name.." = "..tostring(globals[name])) 121 | elseif tp == "degree" then 122 | local float = getXMLFloat( xmlFile, rootTag.."." .. name .. "#value" ) 123 | if float ~= nil then globals[name] = math.rad( float ) end 124 | -- print(file..": "..name.." = "..tostring(globals[name])) 125 | elseif tp == "int" then 126 | local int = getXMLInt( xmlFile, rootTag.."." .. name .. "#value" ) 127 | if int ~= nil then globals[name] = int end 128 | -- print(file..": "..name.." = "..tostring(globals[name])) 129 | elseif tp == "string" then 130 | local str = getXMLString( xmlFile, rootTag.."." .. name .. "#value" ) 131 | if str ~= nil then globals[name] = str end 132 | -- print(file..": "..name.." = "..tostring(globals[name])) 133 | else 134 | tm = 2 135 | print(' <'..name..": invalid XML type : "..tp) 136 | end 137 | if writeLog and tm > 0 then 138 | if wl then 139 | wl = false 140 | print('Loading settings...') 141 | end 142 | if tm == 1 then 143 | print(' <'..name..' type="'..tostring(tp)..'" value="'..tostring(globals[name])..'"/>') 144 | else 145 | print(' <'..name..' .../>: invalid XML type : '..tostring(tp)) 146 | end 147 | end 148 | end 149 | end 150 | 151 | --******************************** 152 | -- globalsCreate 153 | --******************************** 154 | function _newClass_.globalsCreate( file , rootTag, globals, writeLog ) 155 | if writeLog then 156 | print('Creating file "'..file..'"...') 157 | end 158 | local xmlFile = createXMLFile( "mogliBasics", file, rootTag ) 159 | _newClass_.globalsCreate2( xmlFile , rootTag, globals, writeLog ) 160 | saveXMLFile(xmlFile) 161 | end 162 | 163 | --******************************** 164 | -- globalsCreate2 165 | --******************************** 166 | function _newClass_.globalsCreate2( xmlFile , rootTag, globals, writeLog ) 167 | 168 | local wl = true 169 | for name,value in pairs(globals) do 170 | local tp = mogliBase30.getValueType( value ) 171 | local tm = 1 172 | if tp == nil then 173 | tm = 0 174 | elseif tp == "boolean" then 175 | tp = "bool" 176 | setXMLBool( xmlFile, rootTag.."." .. name .. "#value", value ) 177 | elseif tp == "float32" or tp == "number" then 178 | tp = "float" 179 | setXMLFloat( xmlFile, rootTag.."." .. name .. "#value", value ) 180 | elseif tp == "int32" or tp == "int8" then 181 | tp = "int" 182 | setXMLInt( xmlFile, rootTag.."." .. name .. "#value", value ) 183 | elseif tp == "string" then 184 | tp = "string" 185 | setXMLString( xmlFile, rootTag.."." .. name .. "#value", value ) 186 | else 187 | tm = 2 188 | print(' <'..name..": invalid XML type : "..tp) 189 | end 190 | if tm == 1 then 191 | setXMLString(xmlFile, rootTag.."." .. name .. "#type", tp) 192 | end 193 | if writeLog and tm > 0 then 194 | if wl then 195 | wl = false 196 | print('Writing settings...') 197 | end 198 | if tm == 1 then 199 | print(' <'..name..' type="'..tostring(tp)..'" value="'..tostring(globals[name])..'"/>') 200 | else 201 | print(' <'..name..' .../>: invalid XML type : '..tostring(tp)) 202 | end 203 | end 204 | end 205 | end 206 | 207 | --******************************** 208 | -- getUiScale 209 | --******************************** 210 | function _newClass_.getUiScale() 211 | local uiScale = 1.0 212 | if g_gameSettings ~= nil and type( g_gameSettings.uiScale ) == "number" then 213 | uiScale = g_gameSettings.uiScale 214 | end 215 | return uiScale 216 | end 217 | 218 | --******************************** 219 | -- getText 220 | --******************************** 221 | function _newClass_.getText(id, default) 222 | if id == nil then 223 | return "nil"; 224 | end; 225 | 226 | if g_i18n:hasText( id ) then 227 | return g_i18n:getText( id ) 228 | end 229 | 230 | if default ~= nil then 231 | return default 232 | end 233 | 234 | return id 235 | end; 236 | 237 | --******************************** 238 | -- normalizeAngle 239 | --******************************** 240 | function _newClass_.normalizeAngle( angle ) 241 | local normalizedAngle = angle 242 | while normalizedAngle > math.pi do 243 | normalizedAngle = normalizedAngle - math.pi - math.pi 244 | end 245 | while normalizedAngle <= -math.pi do 246 | normalizedAngle = normalizedAngle + math.pi + math.pi 247 | end 248 | return normalizedAngle 249 | end 250 | 251 | --******************************** 252 | -- mbClamp 253 | --******************************** 254 | function _newClass_.mbClamp( v, minV, maxV ) 255 | if v == nil then 256 | return 257 | end 258 | if minV ~= nil and v <= minV then 259 | return minV 260 | end 261 | if maxV ~= nil and v >= maxV then 262 | return maxV 263 | end 264 | return v 265 | end 266 | 267 | --******************************** 268 | -- getSaveAttributesAndNodes 269 | --******************************** 270 | --function _newClass_:saveStatsToXMLFile(xmlFile, key) 271 | function _newClass_:saveToXMLFile(xmlFile, key) 272 | if self[_globalClassName_.."StateHandler"] ~= nil then 273 | local i = 0 274 | for level1,state in pairs( self[_globalClassName_.."StateHandler"] ) do 275 | if state.save then 276 | local value = _newClass_.mbGetState( self, level1 ) 277 | 278 | if value ~= nil and ( state.default == nil or not mogliBase30.compare( state.default, value ) ) then 279 | local vType = mogliBase30.getValueType( value ) 280 | local xmlKey = string.format("%s.state(%d)", key, i) 281 | i = i + 1 282 | setXMLString(xmlFile, xmlKey.."#name", HTMLUtil.encodeToHTML(level1)) 283 | setXMLString(xmlFile, xmlKey.."#type", HTMLUtil.encodeToHTML(vType)) 284 | 285 | if vType == "string" then 286 | setXMLString(xmlFile, xmlKey.."#value", HTMLUtil.encodeToHTML(value)) 287 | elseif vType == "int8" 288 | or vType == "int32" then 289 | setXMLInt(xmlFile, xmlKey.."#value", value) 290 | elseif vType == "float32" 291 | or vType == "number" then 292 | setXMLFloat(xmlFile, xmlKey.."#value", value) 293 | elseif vType == "boolean" then 294 | setXMLBool(xmlFile, xmlKey.."#value", value) 295 | end 296 | end 297 | end 298 | end 299 | end 300 | end; 301 | 302 | --******************************** 303 | -- loadFromAttributesAndNodes 304 | --******************************** 305 | function _newClass_:onPostLoad(samegame) 306 | if savegame ~= nil then 307 | local xmlFile = savegame.xmlFile 308 | local key = savegame.key 309 | local i = 0 310 | while true do 311 | local xmlKey = string.format("%s.%s.state(%d)", key, _globalClassName_, i) 312 | i = i + 1 313 | local level1 = HTMLUtil.decodeFromHTML(getXMLString(xmlFile, xmlKey.."#name")) 314 | if level1 == nil then 315 | break 316 | end 317 | local vType = HTMLUtil.decodeFromHTML(getXMLString(xmlFile, xmlKey.."#type")) 318 | local value = nil 319 | if vType == nil then 320 | elseif vType == "string" then 321 | value = HTMLUtil.decodeFromHTML(getXMLString(xmlFile, xmlKey.."#value")) 322 | elseif vType == "int8" 323 | or vType == "int32" then 324 | value = getXMLInt(xmlFile, xmlKey.."#value") 325 | elseif vType == "float32" 326 | or vType == "number" then 327 | value = getXMLFloat(xmlFile, xmlKey.."#value") 328 | elseif vType == "boolean" then 329 | value = getXMLBool(xmlFile, xmlKey.."#value") 330 | end 331 | 332 | --print(tostring(xmlKey).." "..tostring(level1).." "..tostring(vType).." "..tostring(value)) 333 | 334 | if value ~= nil then 335 | _newClass_.mbSetState( self, level1, value, true) 336 | end 337 | end 338 | end 339 | end 340 | 341 | --******************************** 342 | -- initStateHandling 343 | --******************************** 344 | function _newClass_:initStateHandling( ) 345 | if self == nil then 346 | _newClass_:debugEvent( "initStateHandling" ) 347 | end 348 | if self[_globalClassName_.."ConfigHandler"] == nil then 349 | self[_globalClassName_.."ConfigHandler"] = {} 350 | end 351 | if self[_globalClassName_.."StateHandler"] == nil then 352 | self[_globalClassName_.."StateHandler"] = {} 353 | end 354 | if _level0_ ~= nil and _level0_ ~= "" and self[_level0_] == nil then 355 | self[_level0_] = {} 356 | end 357 | end 358 | 359 | --******************************** 360 | -- getValueType 361 | --******************************** 362 | function _newClass_.getValueType( value ) 363 | return mogliBase30.getValueType( value ) 364 | end 365 | 366 | --******************************** 367 | -- mbSetStateInternal 368 | --******************************** 369 | function _newClass_:mbSetStateInternal(level1, value) 370 | if _level0_ == nil or _level0_ == "" then 371 | self[level1] = value 372 | else 373 | if self[_level0_] == nil then 374 | self[_level0_] = {} 375 | end 376 | self[_level0_][level1] = value 377 | end 378 | end 379 | 380 | --******************************** 381 | -- registerState 382 | --******************************** 383 | function _newClass_:registerServerField( level1 ) 384 | _newClass_.initStateHandling( self ) 385 | self[_globalClassName_.."ConfigHandler"][level1] = true 386 | end 387 | 388 | --******************************** 389 | -- mbGetState 390 | --******************************** 391 | function _newClass_:mbGetState(level1) 392 | if _level0_ == nil or _level0_ == "" then 393 | return self[level1] 394 | end 395 | if self[_level0_] == nil then 396 | return nil 397 | end 398 | return self[_level0_][level1] 399 | end 400 | 401 | --******************************** 402 | -- registerState 403 | --******************************** 404 | function _newClass_:registerState( level1, default, handler, saveAttribute ) 405 | _newClass_.initStateHandling( self ) 406 | self[_globalClassName_.."StateHandler"][level1] = {} 407 | if default ~= nil then 408 | self[_globalClassName_.."StateHandler"][level1].default = default 409 | _newClass_.mbSetStateInternal(self,level1,default) 410 | end 411 | if handler ~= nil then 412 | self[_globalClassName_.."StateHandler"][level1].handler = handler 413 | end 414 | self[_globalClassName_.."StateHandler"][level1].save = saveAttribute 415 | end 416 | 417 | --******************************** 418 | -- mbSetState 419 | --******************************** 420 | function _newClass_:mbSetState(level1, value, noEventSend) 421 | --if not _newClass_.mbIsSynced( self ) then return end 422 | _newClass_.initStateHandling( self ) 423 | 424 | if self[_globalClassName_.."StateHandler"][level1] == nil then 425 | _newClass_.registerState( self, level1 ) 426 | end 427 | 428 | local old = _newClass_.mbGetState( self, level1 ) 429 | if old == nil or not ( mogliBase30.compare( old, value ) ) then 430 | if self[_globalClassName_.."StateHandler"][level1].handler ~= nil then 431 | local noEventSend2 = true 432 | if self.isServer then 433 | noEventSend2 = noEventSend 434 | end 435 | 436 | local state, message = pcall( self[_globalClassName_.."StateHandler"][level1].handler, self, old, value, noEventSend2 ) 437 | if not state then 438 | print("Error: "..tostring(message)) 439 | _newClass_.debugEvent( self, self[level1], value, noEventSend ) 440 | _newClass_.mbSetStateInternal(self, level1, value) 441 | end 442 | else 443 | _newClass_.mbSetStateInternal(self, level1, value) 444 | end 445 | 446 | if noEventSend == nil or noEventSend == false then 447 | local eventObject = mogliBase30Event:new(_globalClassName_, self, level1, value) 448 | if g_server ~= nil then 449 | g_server:broadcastEvent( eventObject ) 450 | else 451 | _newClass_.mbSync( self ) 452 | g_client:getServerConnection():sendEvent( eventObject ) 453 | end 454 | end 455 | end 456 | end 457 | 458 | --******************************** 459 | -- toMbDocument 460 | --******************************** 461 | function _newClass_:toMbDocument() 462 | local mbDocument = {} 463 | 464 | if self[_globalClassName_.."ConfigHandler"] ~= nil then 465 | mbDocument.config = {} 466 | for level1,state in pairs( self[_globalClassName_.."ConfigHandler"] ) do 467 | mbDocument.config[level1] = _newClass_.mbGetState( self, level1 ) 468 | end 469 | end 470 | 471 | if self[_globalClassName_.."StateHandler"] ~= nil then 472 | mbDocument.state = {} 473 | for level1,state in pairs( self[_globalClassName_.."StateHandler"] ) do 474 | mbDocument.state[level1] = _newClass_.mbGetState( self, level1 ) 475 | end 476 | end 477 | 478 | return mbDocument 479 | end 480 | 481 | --******************************** 482 | -- fromMbDocument 483 | --******************************** 484 | function _newClass_:fromMbDocument( mbDocument ) 485 | if mbDocument.config ~= nil then 486 | for level1,value in pairs( mbDocument.config ) do 487 | _newClass_.mbSetStateInternal(self, level1, value) 488 | end 489 | end 490 | 491 | if mbDocument.state ~= nil then 492 | for level1,value in pairs( mbDocument.state ) do 493 | _newClass_.mbSetState(self, level1, value, true) 494 | end 495 | end 496 | end 497 | 498 | --******************************** 499 | -- onReadStream 500 | --******************************** 501 | function _newClass_:onReadStream(streamId, connection) 502 | --print(tostring(_globalClassName_).." / "..tostring(self.configFileName)..": synced via readStream") 503 | local mbDocument, pos, err = "", 0, "" 504 | local mode = streamReadString( streamId ) 505 | --print("readStream using mode: "..tostring(mode)) 506 | if mode == "nil" then 507 | mbDocument = {} 508 | else 509 | err, mbDocument = mogliBase30.readStreamEx( streamId ) 510 | if err ~= _globalClassName_ then 511 | print("Error: '".._globalClassName_.."' expected") 512 | mbDocument = {} 513 | end 514 | end 515 | 516 | _newClass_.fromMbDocument( self, mbDocument ) 517 | self[_globalClassName_.."SyncRequested"] = true 518 | self[_globalClassName_.."SyncReceived"] = true 519 | end 520 | 521 | --******************************** 522 | -- onWriteStream 523 | --******************************** 524 | function _newClass_:onWriteStream(streamId, connection) 525 | 526 | if self[_globalClassName_.."ConfigHandler"] == nil 527 | and self[_globalClassName_.."StateHandler"] == nil then 528 | streamWriteString( streamId, "nil" ) 529 | else 530 | streamWriteString( streamId, "no json" ) 531 | mogliBase30.writeStreamEx( streamId, _globalClassName_, _newClass_.toMbDocument( self ) ) 532 | end 533 | end 534 | 535 | --******************************** 536 | -- printCallStack 537 | --******************************** 538 | function _newClass_:printCallStack( depth ) 539 | mogliBase30.printCallStack( depth ) 540 | end 541 | 542 | --******************************** 543 | -- debugEvent 544 | --******************************** 545 | function _newClass_:debugEvent( old, new, noEventSend ) 546 | _newClass_.printCallStack( self ) 547 | print(tostring(old).." "..tostring(new).." "..tostring(noEventSend)) 548 | end 549 | --******************************** 550 | -- mogliBaseTestStream 551 | --******************************** 552 | function _newClass_:mogliBaseTestStream( ) 553 | if self[_globalClassName_.."ConfigHandler"] == nil 554 | and self[_globalClassName_.."StateHandler"] == nil then 555 | return 556 | end 557 | if g_client ~= nil then 558 | self[_globalClassName_.."SyncReceived"] = nil 559 | g_client:getServerConnection():sendEvent(mogliBase30Request:new( _globalClassName_, self ),true) 560 | end 561 | end 562 | 563 | function _newClass_:mbSync() 564 | if self == nil then 565 | print("Error: moglieBase.mbSync called with self == nil") 566 | mogliBase30.printCallStack() 567 | return 568 | end 569 | if g_server ~= nil then 570 | self[_globalClassName_.."SyncReceived"] = true 571 | end 572 | if self[_globalClassName_.."ConfigHandler"] == nil 573 | and self[_globalClassName_.."StateHandler"] == nil then 574 | return 575 | end 576 | if self[_globalClassName_.."SyncConnections"] ~= nil then 577 | local temp = self[_globalClassName_.."SyncConnections"] 578 | self[_globalClassName_.."SyncConnections"] = nil 579 | for connection,doit in pairs(temp) do 580 | connection:sendEvent(mogliBase30Reply:new( _globalClassName_, self ),true) 581 | end 582 | end 583 | if not ( self[_globalClassName_.."SyncRequested"] ) then 584 | self[_globalClassName_.."SyncRequested"] = true 585 | if g_server == nil then 586 | g_client:getServerConnection():sendEvent(mogliBase30Request:new( _globalClassName_, self ),true) 587 | end 588 | end 589 | end 590 | 591 | function _newClass_:mbIsSynced() 592 | if g_server ~= nil then 593 | return true 594 | end 595 | if self == nil then 596 | print("Error: moglieBase.mbIsSynced called with self == nil") 597 | mogliBase30.printCallStack() 598 | return 599 | end 600 | if self[_globalClassName_.."SyncReceived"] then 601 | return true 602 | end 603 | return false 604 | end 605 | 606 | 607 | _G[_globalClassName_] = _newClass_ 608 | end 609 | 610 | --======================================================================================= 611 | -- mogliBase30.printCallStack 612 | --======================================================================================= 613 | function mogliBase30.printCallStack( depth ) 614 | if debug == nil then return end 615 | local i = 2 616 | local d = 10 617 | if type( depth ) == "number" and depth > 1 then 618 | d = depth 619 | end 620 | local info 621 | print("------------------------------------------------------------------------") 622 | while i <= d do 623 | info = debug.getinfo(i) 624 | if info == nil then break end 625 | print(string.format("%i: %s (%i): %s", i, info.short_src, Utils.getNoNil(info.currentline,0), Utils.getNoNil(info.name,""))) 626 | i = i + 1 627 | end 628 | if info ~= nil and info.name ~= nil and info.currentline ~= nil then 629 | print("...") 630 | end 631 | print("------------------------------------------------------------------------") 632 | end 633 | 634 | --======================================================================================= 635 | -- mogliBase30.writeStreamTypedValue 636 | --======================================================================================= 637 | function mogliBase30.writeStreamTypedValue( streamId, valueType, value ) 638 | if valueType == "string" then 639 | streamWriteString(streamId, value) 640 | elseif valueType == "int32" then 641 | streamWriteInt32(streamId, value) 642 | elseif valueType == "int8" then 643 | streamWriteInt8(streamId, value) 644 | elseif valueType == "float32" 645 | or valueType == "number" then 646 | streamWriteFloat32(streamId, value) 647 | elseif valueType == "boolean" then 648 | streamWriteBool(streamId, value) 649 | else 650 | streamWriteString(streamId,tostring(value)) 651 | end 652 | end 653 | 654 | --======================================================================================= 655 | -- mogliBase30.readStreamTypedValue 656 | --======================================================================================= 657 | function mogliBase30.readStreamTypedValue( streamId, valueType ) 658 | local value = nil 659 | if valueType == "string" then 660 | value = streamReadString(streamId) 661 | elseif valueType == "int32" then 662 | value = streamReadInt32(streamId) 663 | elseif valueType == "int8" then 664 | value = streamReadInt8(streamId) 665 | elseif valueType == "float32" 666 | or valueType == "number" then 667 | value = streamReadFloat32(streamId) 668 | elseif valueType == "boolean" then 669 | value = streamReadBool(streamId) 670 | else 671 | value = streamReadString(streamId) 672 | end 673 | return value 674 | end 675 | 676 | --======================================================================================= 677 | -- mogliBase30.writeStreamType 678 | --======================================================================================= 679 | function mogliBase30.writeStreamType( streamId, valueType ) 680 | local uint2 681 | if valueType == "nil" then uint2 = 1 682 | elseif valueType == "string" then uint2 = 2 683 | elseif valueType == "int8" then uint2 = 3 684 | elseif valueType == "int32" then uint2 = 4 685 | elseif valueType == "float32" then uint2 = 5 686 | elseif valueType == "number" then uint2 = 6 687 | elseif valueType == "boolean" then uint2 = 7 688 | elseif valueType == "table" then uint2 = 8 689 | else 690 | print("ERROR in server coding of mogliBase.lua: unknown type: "..tostring(valueType)) 691 | return false 692 | end 693 | --print("MP-INFO: "..valueType.." / "..tostring(uint2)) 694 | streamWriteUInt8( streamId, uint2 ) 695 | return true 696 | end 697 | 698 | --======================================================================================= 699 | -- mogliBase30.readStreamType 700 | --======================================================================================= 701 | function mogliBase30.readStreamType( streamId, debugPrint ) 702 | local uint2 = streamReadUInt8( streamId ) 703 | if uint2 == 1 then valueType = "nil" 704 | elseif uint2 == 2 then valueType = "string" 705 | elseif uint2 == 3 then valueType = "int8" 706 | elseif uint2 == 4 then valueType = "int32" 707 | elseif uint2 == 5 then valueType = "float32" 708 | elseif uint2 == 6 then valueType = "number" 709 | elseif uint2 == 7 then valueType = "boolean" 710 | elseif uint2 == 8 then valueType = "table" 711 | else 712 | print("ERROR in client coding of mogliBase.lua: unknown type: "..tostring(uint2)) 713 | return nil 714 | end 715 | if debugPrint then 716 | print("MP-INFO: "..valueType.." / "..tostring(uint2)) 717 | end 718 | return valueType 719 | end 720 | 721 | --======================================================================================= 722 | -- mogliBase30.writeStreamEx 723 | --======================================================================================= 724 | function mogliBase30.writeStreamEx( streamId, name, value ) 725 | local nameType = mogliBase30.getValueType( name ) 726 | 727 | if nameType ~= "string" 728 | and nameType ~= "int8" 729 | and nameType ~= "int32" 730 | and nameType ~= "float32" 731 | and nameType ~= "number" 732 | and nameType ~= "boolean" then 733 | return false 734 | end 735 | 736 | local valueType = mogliBase30.getValueType( value ) 737 | 738 | if valueType ~= "nil" 739 | and valueType ~= "string" 740 | and valueType ~= "int8" 741 | and valueType ~= "int32" 742 | and valueType ~= "float32" 743 | and valueType ~= "number" 744 | and valueType ~= "boolean" 745 | and valueType ~= "table" then 746 | return false 747 | end 748 | 749 | mogliBase30.writeStreamType( streamId, nameType ) 750 | mogliBase30.writeStreamType( streamId, valueType ) 751 | mogliBase30.writeStreamTypedValue( streamId, nameType, name ) 752 | 753 | --print("MP-INFO: Writing server field "..tostring(name).."("..nameType..") of type "..valueType..":") 754 | 755 | if valueType == "nil" then 756 | elseif valueType ~= "table" then 757 | mogliBase30.writeStreamTypedValue( streamId, valueType, value ) 758 | --print("MP-INFO: ...and value "..tostring(value)) 759 | else 760 | local tableGetn = 0 761 | for n,v in pairs( value ) do 762 | tableGetn = tableGetn + 1 763 | end 764 | streamWriteInt32( streamId, tableGetn ) 765 | --print("MP-INFO: ...and "..tostring( tableGetn ).." elements") 766 | if tableGetn > 0 then 767 | for n,v in pairs( value ) do 768 | mogliBase30.writeStreamEx( streamId, n, v ) 769 | end 770 | end 771 | end 772 | 773 | return true 774 | end 775 | 776 | --======================================================================================= 777 | -- mogliBase30.readStreamEx 778 | --======================================================================================= 779 | function mogliBase30.readStreamEx( streamId, debugPrint ) 780 | local nameType = mogliBase30.readStreamType( streamId, debugPrint ) 781 | local valueType = mogliBase30.readStreamType( streamId, debugPrint ) 782 | local name = mogliBase30.readStreamTypedValue( streamId, nameType ) 783 | 784 | if debugPrint then 785 | print("MP-INFO: Reading server field "..tostring(name).."("..nameType..") of type "..valueType..":") 786 | end 787 | 788 | local value 789 | if valueType == "nil" then 790 | value = nil 791 | elseif valueType ~= "table" then 792 | value = mogliBase30.readStreamTypedValue( streamId, valueType ) 793 | if debugPrint then 794 | print("MP-INFO: ...and value "..tostring(value)) 795 | end 796 | else 797 | value = {} 798 | local tableGetn = streamReadInt32( streamId ) 799 | if debugPrint then 800 | print("MP-INFO: ...and "..tostring(tableGetn).." elements") 801 | end 802 | for i=1,tableGetn do 803 | n,v = mogliBase30.readStreamEx( streamId, debugPrint ) 804 | value[n] = v 805 | end 806 | end 807 | 808 | return name,value 809 | end 810 | 811 | --======================================================================================= 812 | -- mogliBase30.getValueType 813 | --======================================================================================= 814 | function mogliBase30.getValueType( value ) 815 | 816 | if value == nil then 817 | return "string" 818 | end 819 | 820 | local valueType = type( value ) 821 | 822 | if valueType == "number" then 823 | local n = value 824 | if n > -128 825 | and n < 127 826 | and n - math.floor( n ) < 1E-6 then 827 | valueType = "int8" 828 | elseif n > -2e9 829 | and n < 2e9 830 | and n - math.floor( n ) < 1E-6 then 831 | valueType = "int32" 832 | else 833 | valueType = "float32" 834 | end 835 | end 836 | 837 | return valueType 838 | end 839 | 840 | --======================================================================================= 841 | -- mogliBase30.compare 842 | --======================================================================================= 843 | function mogliBase30.compare( value1, value2 ) 844 | if ( value1 == nil and value2 ~= nil ) or ( value1 ~= nil and value2 == nil ) then 845 | return false 846 | end 847 | if value1 == nil and value2 == nil then 848 | return true 849 | end 850 | local vt1 = mogliBase30.getValueType( value1 ) 851 | local vt2 = mogliBase30.getValueType( value2 ) 852 | if vt1 == "table" and vt2 == "table" then 853 | local c1 = 0 854 | local c2 = 0 855 | for n,v in pairs( value1 ) do 856 | c1 = c1 + 1 857 | if not ( mogliBase30.compare( v, value2[n] ) ) then 858 | return false 859 | end 860 | end 861 | for n,v in pairs( value2 ) do 862 | c2 = c2 + 1 863 | if v ~= nil and value1[n] == nil then 864 | return false 865 | end 866 | end 867 | if c1 ~= c2 then 868 | return false 869 | end 870 | return true 871 | elseif vt1 == vt2 then 872 | return value1 == value2 873 | elseif ( vt1 == "int8" or vt1 == "int32" ) 874 | and ( vt2 == "int8" or vt2 == "int32" ) then 875 | return value1 == value2 876 | elseif ( vt1 == "number" or vt1 == "int8" or vt1 == "int32" or vt1 == "float32" ) 877 | and ( vt2 == "number" or vt2 == "int8" or vt2 == "int32" or vt2 == "float32" ) then 878 | local m = math.max( math.abs( value1 ), math.abs( value2 ) ) 879 | if m < 1E-12 then 880 | return true 881 | elseif math.abs( value1 - value2 ) > 1E-6 * m then 882 | return false 883 | end 884 | return true 885 | end 886 | 887 | return false 888 | end 889 | 890 | _G[mogliBaseClass] = mogliBase30 891 | 892 | local mogliBase30Event_mt = Class(mogliBase30Event, Event) 893 | InitEventClass(mogliBase30Event, mogliEventClass) 894 | 895 | --======================================================================================= 896 | -- mogliBase30Event:emptyNew 897 | --======================================================================================= 898 | function mogliBase30Event:emptyNew() 899 | local self = Event:new(mogliBase30Event_mt) 900 | return self 901 | end 902 | 903 | --======================================================================================= 904 | -- mogliBase30Event:new 905 | --======================================================================================= 906 | function mogliBase30Event:new(className, object, level1, value) 907 | local self = mogliBase30Event:emptyNew() 908 | self.className = className 909 | self.object = object 910 | self.level1 = level1 911 | self.value = value 912 | return self 913 | end 914 | 915 | 916 | --======================================================================================= 917 | -- readStream 918 | --======================================================================================= 919 | function mogliBase30Event:readStream(streamId, connection) 920 | self.object = NetworkUtil.readNodeObject( streamId ) 921 | self.className = streamReadString(streamId) 922 | self.level1, self.value = _G[mogliBaseClass].readStreamEx( streamId ) 923 | if self.object == nil then 924 | print("Error: mogliBase30Event received invalid NodeObject") 925 | print(tostring(self.className).."; "..tostring(self.level1).."; "..tostring(self.value)) 926 | else 927 | local state, message = pcall( mogliBase30Event.run, self, connection ) 928 | if not state then 929 | print("Error: "..tostring(message)) 930 | end 931 | end 932 | end 933 | 934 | --======================================================================================= 935 | -- writeStream 936 | --======================================================================================= 937 | function mogliBase30Event:writeStream(streamId, connection) 938 | if self.object == nil then 939 | print("Error: mogliBase30Event has empty object") 940 | end 941 | NetworkUtil.writeNodeObject( streamId, self.object ) 942 | streamWriteString(streamId, self.className ) 943 | _G[mogliBaseClass].writeStreamEx( streamId, self.level1, self.value ) 944 | end 945 | 946 | --======================================================================================= 947 | -- run 948 | --======================================================================================= 949 | function mogliBase30Event:run(connection) 950 | ----both clients and server can "run" this event (after reading it) 951 | if self.object == nil or self.className == nil or self.className == "" then 952 | print("Error running event: nil ("..tostring(self.className)..")") 953 | return 954 | end 955 | 956 | _G[self.className].mbSetState(self.object, self.level1, self.value, true) 957 | if not connection:getIsServer() then 958 | g_server:broadcastEvent(mogliBase30Event:new(self.className, self.object, self.level1, self.value), nil, connection, self.object) 959 | end 960 | end 961 | 962 | 963 | 964 | 965 | 966 | 967 | local mogliBase30Request_mt = Class(mogliBase30Request, Event) 968 | InitEventClass(mogliBase30Request, mogliSyncRequest) 969 | function mogliBase30Request:emptyNew() 970 | local self = Event:new(mogliBase30Request_mt) 971 | return self 972 | end 973 | function mogliBase30Request:new( className, object ) 974 | local self = mogliBase30Request:emptyNew() 975 | self.className = className 976 | self.object = object 977 | return self 978 | end 979 | function mogliBase30Request:readStream(streamId, connection) 980 | self.object = NetworkUtil.readNodeObject( streamId ) 981 | self.className = streamReadString(streamId) 982 | if self.object == nil then 983 | print("Error: mogliBase30Request received invalid NodeObject") 984 | else 985 | local state, message = pcall( mogliBase30Request.run, self, connection ) 986 | if not state then 987 | print("Error: "..tostring(message)) 988 | end 989 | end 990 | end 991 | function mogliBase30Request:writeStream(streamId, connection) 992 | if self.object == nil then 993 | print("Error: mogliBase30Request has empty object") 994 | end 995 | NetworkUtil.writeNodeObject( streamId, self.object ) 996 | streamWriteString(streamId, self.className ) 997 | end 998 | function mogliBase30Request:run(connection) 999 | if self.object[self.className.."SyncConnections"] == nil then 1000 | self.object[self.className.."SyncConnections"] = {} 1001 | end 1002 | self.object[self.className.."SyncConnections"][connection] = true 1003 | end 1004 | 1005 | 1006 | 1007 | 1008 | 1009 | local mogliBase30Reply_mt = Class(mogliBase30Reply, Event) 1010 | InitEventClass(mogliBase30Reply, mogliSyncReply) 1011 | function mogliBase30Reply:emptyNew() 1012 | local self = Event:new(mogliBase30Reply_mt) 1013 | return self 1014 | end 1015 | function mogliBase30Reply:new( className, object ) 1016 | local self = mogliBase30Reply:emptyNew() 1017 | self.className = className 1018 | self.object = object 1019 | self.document = _G[self.className].toMbDocument( self.object ) 1020 | return self 1021 | end 1022 | function mogliBase30Reply:readStream(streamId, connection) 1023 | self.object = NetworkUtil.readNodeObject( streamId ) 1024 | self.className, self.document = mogliBase30.readStreamEx( streamId ) 1025 | if self.object == nil then 1026 | print("Error: mogliBase30Reply received invalid NodeObject") 1027 | else 1028 | local state, message = pcall( mogliBase30Reply.run, self, connection ) 1029 | if not state then 1030 | print("Error: "..tostring(message)) 1031 | end 1032 | end 1033 | end 1034 | function mogliBase30Reply:writeStream(streamId, connection) 1035 | if self.object == nil then 1036 | print("Error: mogliBase30Reply has empty object") 1037 | end 1038 | NetworkUtil.writeNodeObject( streamId, self.object ) 1039 | mogliBase30.writeStreamEx( streamId, self.className, self.document ) 1040 | end 1041 | function mogliBase30Reply:run(connection) 1042 | _G[self.className].fromMbDocument( self.object, self.document ) 1043 | self.object[self.className.."SyncReceived"] = true 1044 | end 1045 | 1046 | 1047 | end --------------------------------------------------------------------------------