├── Factory Original Firmware └── 3DPrintMill-firmware-20210114-182039.bin ├── New Firmware ├── Marlin-creality_CR30_printmill_208 │ ├── .editorconfig │ ├── .gitattributes │ ├── .github │ │ ├── FUNDING.yml │ │ ├── code_of_conduct.md │ │ ├── contributing.md │ │ ├── issue_template.md │ │ ├── lock.yml │ │ ├── pull_request_template.md │ │ └── workflows │ │ │ └── test-builds.yml │ ├── .gitignore │ ├── LICENSE │ ├── Makefile │ ├── Marlin │ │ ├── Configuration.h │ │ ├── Configuration_adv.h │ │ ├── Makefile │ │ ├── Marlin.ino │ │ ├── Version.h │ │ ├── _Bootscreen.h │ │ ├── _Statusscreen.h │ │ └── src │ │ │ ├── HAL │ │ │ ├── AVR │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── MarlinSerial.cpp │ │ │ │ ├── MarlinSerial.h │ │ │ │ ├── Servo.cpp │ │ │ │ ├── ServoTimers.h │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fast_pwm.cpp │ │ │ │ ├── fastio.cpp │ │ │ │ ├── fastio.h │ │ │ │ ├── fastio │ │ │ │ │ ├── fastio_1280.h │ │ │ │ │ ├── fastio_1281.h │ │ │ │ │ ├── fastio_168.h │ │ │ │ │ ├── fastio_644.h │ │ │ │ │ └── fastio_AT90USB.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── math.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── pinsDebug_Teensyduino.h │ │ │ │ ├── pinsDebug_plus_70.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.h │ │ │ │ ├── u8g_com_HAL_AVR_sw_spi.cpp │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── DUE │ │ │ │ ├── DebugMonitor.cpp │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── InterruptVectors.cpp │ │ │ │ ├── InterruptVectors.h │ │ │ │ ├── MarlinSerial.cpp │ │ │ │ ├── MarlinSerial.h │ │ │ │ ├── MarlinSerialUSB.cpp │ │ │ │ ├── MarlinSerialUSB.h │ │ │ │ ├── Servo.cpp │ │ │ │ ├── ServoTimers.h │ │ │ │ ├── Tone.cpp │ │ │ │ ├── dogm │ │ │ │ │ ├── u8g_com_HAL_DUE_shared_hw_spi.cpp │ │ │ │ │ ├── u8g_com_HAL_DUE_st7920_sw_spi.cpp │ │ │ │ │ ├── u8g_com_HAL_DUE_sw_spi.cpp │ │ │ │ │ ├── u8g_com_HAL_DUE_sw_spi_shared.cpp │ │ │ │ │ └── u8g_com_HAL_DUE_sw_spi_shared.h │ │ │ │ ├── eeprom_flash.cpp │ │ │ │ ├── eeprom_wired.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── fastio │ │ │ │ │ ├── G2_PWM.cpp │ │ │ │ │ ├── G2_PWM.h │ │ │ │ │ └── G2_pins.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── upload_extra_script.py │ │ │ │ ├── usb │ │ │ │ │ ├── arduino_due_x.h │ │ │ │ │ ├── compiler.h │ │ │ │ │ ├── conf_access.h │ │ │ │ │ ├── conf_clock.h │ │ │ │ │ ├── conf_usb.h │ │ │ │ │ ├── ctrl_access.c │ │ │ │ │ ├── ctrl_access.h │ │ │ │ │ ├── genclk.h │ │ │ │ │ ├── mrepeat.h │ │ │ │ │ ├── osc.h │ │ │ │ │ ├── pll.h │ │ │ │ │ ├── preprocessor.h │ │ │ │ │ ├── sbc_protocol.h │ │ │ │ │ ├── sd_mmc_spi_mem.cpp │ │ │ │ │ ├── sd_mmc_spi_mem.h │ │ │ │ │ ├── spc_protocol.h │ │ │ │ │ ├── stringz.h │ │ │ │ │ ├── sysclk.c │ │ │ │ │ ├── sysclk.h │ │ │ │ │ ├── tpaste.h │ │ │ │ │ ├── udc.c │ │ │ │ │ ├── udc.h │ │ │ │ │ ├── udc_desc.h │ │ │ │ │ ├── udd.h │ │ │ │ │ ├── udi.h │ │ │ │ │ ├── udi_cdc.c │ │ │ │ │ ├── udi_cdc.h │ │ │ │ │ ├── udi_cdc_conf.h │ │ │ │ │ ├── udi_cdc_desc.c │ │ │ │ │ ├── udi_composite_desc.c │ │ │ │ │ ├── udi_msc.c │ │ │ │ │ ├── udi_msc.h │ │ │ │ │ ├── uotghs_device_due.c │ │ │ │ │ ├── uotghs_device_due.h │ │ │ │ │ ├── uotghs_otg.h │ │ │ │ │ ├── usb_protocol.h │ │ │ │ │ ├── usb_protocol_cdc.h │ │ │ │ │ ├── usb_protocol_msc.h │ │ │ │ │ ├── usb_task.c │ │ │ │ │ └── usb_task.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── ESP32 │ │ │ │ ├── FlushableHardwareSerial.cpp │ │ │ │ ├── FlushableHardwareSerial.h │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── WebSocketSerial.cpp │ │ │ │ ├── WebSocketSerial.h │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── i2s.cpp │ │ │ │ ├── i2s.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── ota.cpp │ │ │ │ ├── ota.h │ │ │ │ ├── servotimers.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── spiffs.cpp │ │ │ │ ├── spiffs.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ ├── watchdog.h │ │ │ │ ├── web.cpp │ │ │ │ ├── web.h │ │ │ │ ├── wifi.cpp │ │ │ │ └── wifi.h │ │ │ ├── HAL.h │ │ │ ├── LINUX │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── arduino.cpp │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── fastio.h │ │ │ │ ├── hardware │ │ │ │ │ ├── Clock.cpp │ │ │ │ │ ├── Clock.h │ │ │ │ │ ├── Gpio.cpp │ │ │ │ │ ├── Gpio.h │ │ │ │ │ ├── Heater.cpp │ │ │ │ │ ├── Heater.h │ │ │ │ │ ├── IOLoggerCSV.cpp │ │ │ │ │ ├── IOLoggerCSV.h │ │ │ │ │ ├── LinearAxis.cpp │ │ │ │ │ ├── LinearAxis.h │ │ │ │ │ ├── Timer.cpp │ │ │ │ │ └── Timer.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── include │ │ │ │ │ ├── Arduino.h │ │ │ │ │ ├── pinmapping.cpp │ │ │ │ │ ├── pinmapping.h │ │ │ │ │ └── serial.h │ │ │ │ ├── main.cpp │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── servo_private.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── LPC1768 │ │ │ │ ├── DebugMonitor.cpp │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── MarlinSPI.h │ │ │ │ ├── MarlinSerial.cpp │ │ │ │ ├── MarlinSerial.h │ │ │ │ ├── Servo.h │ │ │ │ ├── eeprom_flash.cpp │ │ │ │ ├── eeprom_sdcard.cpp │ │ │ │ ├── eeprom_wired.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fast_pwm.cpp │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── include │ │ │ │ │ ├── SPI.h │ │ │ │ │ ├── digipot_mcp4451_I2C_routines.c │ │ │ │ │ ├── digipot_mcp4451_I2C_routines.h │ │ │ │ │ ├── i2c_util.c │ │ │ │ │ └── i2c_util.h │ │ │ │ ├── main.cpp │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── tft │ │ │ │ │ ├── tft_spi.cpp │ │ │ │ │ ├── tft_spi.h │ │ │ │ │ ├── xpt2046.cpp │ │ │ │ │ └── xpt2046.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── u8g │ │ │ │ │ ├── LCD_I2C_routines.cpp │ │ │ │ │ ├── LCD_I2C_routines.h │ │ │ │ │ ├── LCD_defines.h │ │ │ │ │ ├── LCD_delay.h │ │ │ │ │ ├── LCD_pin_routines.c │ │ │ │ │ ├── LCD_pin_routines.h │ │ │ │ │ ├── u8g_com_HAL_LPC1768_hw_spi.cpp │ │ │ │ │ ├── u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp │ │ │ │ │ ├── u8g_com_HAL_LPC1768_st7920_hw_spi.cpp │ │ │ │ │ ├── u8g_com_HAL_LPC1768_st7920_sw_spi.cpp │ │ │ │ │ └── u8g_com_HAL_LPC1768_sw_spi.cpp │ │ │ │ ├── upload_extra_script.py │ │ │ │ ├── usb_serial.cpp │ │ │ │ ├── watchdog.cpp │ │ │ │ ├── watchdog.h │ │ │ │ └── win_usb_driver │ │ │ │ │ └── lpc176x_usb_driver.inf │ │ │ ├── SAMD51 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── MarlinSerial_AGCM4.cpp │ │ │ │ ├── MarlinSerial_AGCM4.h │ │ │ │ ├── QSPIFlash.cpp │ │ │ │ ├── QSPIFlash.h │ │ │ │ ├── SAMD51.h │ │ │ │ ├── Servo.cpp │ │ │ │ ├── ServoTimers.h │ │ │ │ ├── eeprom_flash.cpp │ │ │ │ ├── eeprom_qspi.cpp │ │ │ │ ├── eeprom_wired.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── STM32 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── MarlinSPI.cpp │ │ │ │ ├── MarlinSPI.h │ │ │ │ ├── MarlinSerial.cpp │ │ │ │ ├── MarlinSerial.h │ │ │ │ ├── README.md │ │ │ │ ├── Sd2Card_sdio_stm32duino.cpp │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── eeprom_flash.cpp │ │ │ │ ├── eeprom_sdcard.cpp │ │ │ │ ├── eeprom_sram.cpp │ │ │ │ ├── eeprom_wired.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fast_pwm.cpp │ │ │ │ ├── fastio.cpp │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── pins_Xref.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── tft │ │ │ │ │ ├── tft_fsmc.cpp │ │ │ │ │ ├── tft_fsmc.h │ │ │ │ │ ├── tft_spi.cpp │ │ │ │ │ ├── tft_spi.h │ │ │ │ │ ├── xpt2046.cpp │ │ │ │ │ └── xpt2046.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── usb_host.cpp │ │ │ │ ├── usb_host.h │ │ │ │ ├── usb_serial.cpp │ │ │ │ ├── usb_serial.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── STM32F1 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── MarlinSPI.h │ │ │ │ ├── MarlinSerial.cpp │ │ │ │ ├── MarlinSerial.h │ │ │ │ ├── README.md │ │ │ │ ├── SPI.cpp │ │ │ │ ├── SPI.h │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── build_flags.py │ │ │ │ ├── dogm │ │ │ │ │ └── u8g_com_stm32duino_swspi.cpp │ │ │ │ ├── eeprom_bl24cxx.cpp │ │ │ │ ├── eeprom_flash.cpp │ │ │ │ ├── eeprom_if_iic.cpp │ │ │ │ ├── eeprom_sdcard.cpp │ │ │ │ ├── eeprom_wired.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fast_pwm.cpp │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── maple_win_usb_driver │ │ │ │ │ └── maple_serial.inf │ │ │ │ ├── msc_sd.cpp │ │ │ │ ├── msc_sd.h │ │ │ │ ├── onboard_sd.cpp │ │ │ │ ├── onboard_sd.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── sdio.cpp │ │ │ │ ├── sdio.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── tft │ │ │ │ │ ├── tft_fsmc.cpp │ │ │ │ │ ├── tft_fsmc.h │ │ │ │ │ ├── tft_spi.cpp │ │ │ │ │ ├── tft_spi.h │ │ │ │ │ ├── xpt2046.cpp │ │ │ │ │ └── xpt2046.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── TEENSY31_32 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── TEENSY35_36 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── TEENSY40_41 │ │ │ │ ├── HAL.cpp │ │ │ │ ├── HAL.h │ │ │ │ ├── HAL_SPI.cpp │ │ │ │ ├── Servo.cpp │ │ │ │ ├── Servo.h │ │ │ │ ├── eeprom.cpp │ │ │ │ ├── endstop_interrupts.h │ │ │ │ ├── fastio.h │ │ │ │ ├── inc │ │ │ │ │ ├── Conditionals_LCD.h │ │ │ │ │ ├── Conditionals_adv.h │ │ │ │ │ ├── Conditionals_post.h │ │ │ │ │ └── SanityCheck.h │ │ │ │ ├── pinsDebug.h │ │ │ │ ├── spi_pins.h │ │ │ │ ├── timers.cpp │ │ │ │ ├── timers.h │ │ │ │ ├── watchdog.cpp │ │ │ │ └── watchdog.h │ │ │ ├── platforms.h │ │ │ └── shared │ │ │ │ ├── Delay.h │ │ │ │ ├── HAL_SPI.h │ │ │ │ ├── HAL_ST7920.h │ │ │ │ ├── HAL_spi_L6470.cpp │ │ │ │ ├── Marduino.h │ │ │ │ ├── backtrace │ │ │ │ ├── backtrace.cpp │ │ │ │ ├── backtrace.h │ │ │ │ ├── unwarm.cpp │ │ │ │ ├── unwarm.h │ │ │ │ ├── unwarm_arm.cpp │ │ │ │ ├── unwarm_thumb.cpp │ │ │ │ ├── unwarmbytab.cpp │ │ │ │ ├── unwarmbytab.h │ │ │ │ ├── unwarmmem.cpp │ │ │ │ ├── unwarmmem.h │ │ │ │ ├── unwinder.cpp │ │ │ │ ├── unwinder.h │ │ │ │ ├── unwmemaccess.cpp │ │ │ │ └── unwmemaccess.h │ │ │ │ ├── eeprom_api.cpp │ │ │ │ ├── eeprom_api.h │ │ │ │ ├── eeprom_if.h │ │ │ │ ├── eeprom_if_i2c.cpp │ │ │ │ ├── eeprom_if_spi.cpp │ │ │ │ ├── esp_wifi.cpp │ │ │ │ ├── esp_wifi.h │ │ │ │ ├── math_32bit.h │ │ │ │ ├── servo.cpp │ │ │ │ ├── servo.h │ │ │ │ └── servo_private.h │ │ │ ├── MarlinCore.cpp │ │ │ ├── MarlinCore.h │ │ │ ├── core │ │ │ ├── boards.h │ │ │ ├── debug_out.h │ │ │ ├── debug_section.h │ │ │ ├── drivers.h │ │ │ ├── language.h │ │ │ ├── macros.h │ │ │ ├── millis_t.h │ │ │ ├── multi_language.h │ │ │ ├── serial.cpp │ │ │ ├── serial.h │ │ │ ├── types.h │ │ │ ├── utility.cpp │ │ │ └── utility.h │ │ │ ├── feature │ │ │ ├── babystep.cpp │ │ │ ├── babystep.h │ │ │ ├── backlash.cpp │ │ │ ├── backlash.h │ │ │ ├── baricuda.cpp │ │ │ ├── baricuda.h │ │ │ ├── bedlevel │ │ │ │ ├── abl │ │ │ │ │ ├── abl.cpp │ │ │ │ │ └── abl.h │ │ │ │ ├── bedlevel.cpp │ │ │ │ ├── bedlevel.h │ │ │ │ ├── mbl │ │ │ │ │ ├── mesh_bed_leveling.cpp │ │ │ │ │ └── mesh_bed_leveling.h │ │ │ │ └── ubl │ │ │ │ │ ├── ubl.cpp │ │ │ │ │ ├── ubl.h │ │ │ │ │ ├── ubl_G29.cpp │ │ │ │ │ └── ubl_motion.cpp │ │ │ ├── binary_stream.cpp │ │ │ ├── binary_stream.h │ │ │ ├── bltouch.cpp │ │ │ ├── bltouch.h │ │ │ ├── cancel_object.cpp │ │ │ ├── cancel_object.h │ │ │ ├── caselight.cpp │ │ │ ├── caselight.h │ │ │ ├── closedloop.cpp │ │ │ ├── closedloop.h │ │ │ ├── controllerfan.cpp │ │ │ ├── controllerfan.h │ │ │ ├── dac │ │ │ │ ├── dac_dac084s085.cpp │ │ │ │ ├── dac_dac084s085.h │ │ │ │ ├── dac_mcp4728.cpp │ │ │ │ ├── dac_mcp4728.h │ │ │ │ ├── stepper_dac.cpp │ │ │ │ └── stepper_dac.h │ │ │ ├── digipot │ │ │ │ ├── digipot.h │ │ │ │ ├── digipot_mcp4018.cpp │ │ │ │ └── digipot_mcp4451.cpp │ │ │ ├── direct_stepping.cpp │ │ │ ├── direct_stepping.h │ │ │ ├── e_parser.cpp │ │ │ ├── e_parser.h │ │ │ ├── encoder_i2c.cpp │ │ │ ├── encoder_i2c.h │ │ │ ├── ethernet.cpp │ │ │ ├── ethernet.h │ │ │ ├── fanmux.cpp │ │ │ ├── fanmux.h │ │ │ ├── filwidth.cpp │ │ │ ├── filwidth.h │ │ │ ├── fwretract.cpp │ │ │ ├── fwretract.h │ │ │ ├── host_actions.cpp │ │ │ ├── host_actions.h │ │ │ ├── hotend_idle.cpp │ │ │ ├── hotend_idle.h │ │ │ ├── joystick.cpp │ │ │ ├── joystick.h │ │ │ ├── leds │ │ │ │ ├── blinkm.cpp │ │ │ │ ├── blinkm.h │ │ │ │ ├── leds.cpp │ │ │ │ ├── leds.h │ │ │ │ ├── neopixel.cpp │ │ │ │ ├── neopixel.h │ │ │ │ ├── pca9533.cpp │ │ │ │ ├── pca9533.h │ │ │ │ ├── pca9632.cpp │ │ │ │ ├── pca9632.h │ │ │ │ ├── printer_event_leds.cpp │ │ │ │ ├── printer_event_leds.h │ │ │ │ ├── tempstat.cpp │ │ │ │ └── tempstat.h │ │ │ ├── max7219.cpp │ │ │ ├── max7219.h │ │ │ ├── mixing.cpp │ │ │ ├── mixing.h │ │ │ ├── mmu │ │ │ │ ├── mmu.cpp │ │ │ │ ├── mmu.h │ │ │ │ ├── mmu2-serial-protocol.md │ │ │ │ ├── mmu2.cpp │ │ │ │ └── mmu2.h │ │ │ ├── password │ │ │ │ ├── password.cpp │ │ │ │ └── password.h │ │ │ ├── pause.cpp │ │ │ ├── pause.h │ │ │ ├── power.cpp │ │ │ ├── power.h │ │ │ ├── power_monitor.cpp │ │ │ ├── power_monitor.h │ │ │ ├── powerloss.cpp │ │ │ ├── powerloss.h │ │ │ ├── probe_temp_comp.cpp │ │ │ ├── probe_temp_comp.h │ │ │ ├── repeat.cpp │ │ │ ├── repeat.h │ │ │ ├── runout.cpp │ │ │ ├── runout.h │ │ │ ├── solenoid.cpp │ │ │ ├── solenoid.h │ │ │ ├── spindle_laser.cpp │ │ │ ├── spindle_laser.h │ │ │ ├── spindle_laser_types.h │ │ │ ├── tmc_util.cpp │ │ │ ├── tmc_util.h │ │ │ ├── tramming.h │ │ │ ├── twibus.cpp │ │ │ ├── twibus.h │ │ │ ├── z_stepper_align.cpp │ │ │ └── z_stepper_align.h │ │ │ ├── gcode │ │ │ ├── bedlevel │ │ │ │ ├── G26.cpp │ │ │ │ ├── G35.cpp │ │ │ │ ├── G42.cpp │ │ │ │ ├── M420.cpp │ │ │ │ ├── abl │ │ │ │ │ ├── G29.cpp │ │ │ │ │ └── M421.cpp │ │ │ │ ├── mbl │ │ │ │ │ ├── G29.cpp │ │ │ │ │ └── M421.cpp │ │ │ │ └── ubl │ │ │ │ │ ├── G29.cpp │ │ │ │ │ └── M421.cpp │ │ │ ├── calibrate │ │ │ │ ├── G28.cpp │ │ │ │ ├── G33.cpp │ │ │ │ ├── G34.cpp │ │ │ │ ├── G34_M422.cpp │ │ │ │ ├── G425.cpp │ │ │ │ ├── G76_M192_M871.cpp │ │ │ │ ├── M100.cpp │ │ │ │ ├── M12.cpp │ │ │ │ ├── M425.cpp │ │ │ │ ├── M48.cpp │ │ │ │ ├── M665.cpp │ │ │ │ ├── M666.cpp │ │ │ │ └── M852.cpp │ │ │ ├── config │ │ │ │ ├── M200-M205.cpp │ │ │ │ ├── M217.cpp │ │ │ │ ├── M218.cpp │ │ │ │ ├── M220.cpp │ │ │ │ ├── M221.cpp │ │ │ │ ├── M281.cpp │ │ │ │ ├── M301.cpp │ │ │ │ ├── M302.cpp │ │ │ │ ├── M304.cpp │ │ │ │ ├── M305.cpp │ │ │ │ ├── M43.cpp │ │ │ │ ├── M540.cpp │ │ │ │ ├── M575.cpp │ │ │ │ ├── M672.cpp │ │ │ │ └── M92.cpp │ │ │ ├── control │ │ │ │ ├── M108_M112_M410.cpp │ │ │ │ ├── M111.cpp │ │ │ │ ├── M120_M121.cpp │ │ │ │ ├── M17_M18_M84.cpp │ │ │ │ ├── M211.cpp │ │ │ │ ├── M226.cpp │ │ │ │ ├── M280.cpp │ │ │ │ ├── M3-M5.cpp │ │ │ │ ├── M350_M351.cpp │ │ │ │ ├── M380_M381.cpp │ │ │ │ ├── M400.cpp │ │ │ │ ├── M42.cpp │ │ │ │ ├── M605.cpp │ │ │ │ ├── M7-M9.cpp │ │ │ │ ├── M80_M81.cpp │ │ │ │ ├── M85.cpp │ │ │ │ ├── M993_M994.cpp │ │ │ │ ├── M997.cpp │ │ │ │ ├── M999.cpp │ │ │ │ └── T.cpp │ │ │ ├── eeprom │ │ │ │ └── M500-M504.cpp │ │ │ ├── feature │ │ │ │ ├── L6470 │ │ │ │ │ ├── M122.cpp │ │ │ │ │ ├── M906.cpp │ │ │ │ │ └── M916-918.cpp │ │ │ │ ├── advance │ │ │ │ │ └── M900.cpp │ │ │ │ ├── baricuda │ │ │ │ │ └── M126-M129.cpp │ │ │ │ ├── camera │ │ │ │ │ └── M240.cpp │ │ │ │ ├── cancel │ │ │ │ │ └── M486.cpp │ │ │ │ ├── caselight │ │ │ │ │ └── M355.cpp │ │ │ │ ├── clean │ │ │ │ │ └── G12.cpp │ │ │ │ ├── controllerfan │ │ │ │ │ └── M710.cpp │ │ │ │ ├── digipot │ │ │ │ │ └── M907-M910.cpp │ │ │ │ ├── filwidth │ │ │ │ │ └── M404-M407.cpp │ │ │ │ ├── fwretract │ │ │ │ │ ├── G10_G11.cpp │ │ │ │ │ └── M207-M209.cpp │ │ │ │ ├── i2c │ │ │ │ │ └── M260_M261.cpp │ │ │ │ ├── language │ │ │ │ │ └── M414.cpp │ │ │ │ ├── leds │ │ │ │ │ ├── M150.cpp │ │ │ │ │ └── M7219.cpp │ │ │ │ ├── macro │ │ │ │ │ └── M810-M819.cpp │ │ │ │ ├── mixing │ │ │ │ │ ├── M163-M165.cpp │ │ │ │ │ └── M166.cpp │ │ │ │ ├── network │ │ │ │ │ └── M552-M554.cpp │ │ │ │ ├── password │ │ │ │ │ └── M510-M512.cpp │ │ │ │ ├── pause │ │ │ │ │ ├── G27.cpp │ │ │ │ │ ├── G60.cpp │ │ │ │ │ ├── G61.cpp │ │ │ │ │ ├── M125.cpp │ │ │ │ │ ├── M600.cpp │ │ │ │ │ ├── M603.cpp │ │ │ │ │ └── M701_M702.cpp │ │ │ │ ├── power_monitor │ │ │ │ │ └── M430.cpp │ │ │ │ ├── powerloss │ │ │ │ │ ├── M1000.cpp │ │ │ │ │ └── M413.cpp │ │ │ │ ├── prusa_MMU2 │ │ │ │ │ └── M403.cpp │ │ │ │ ├── runout │ │ │ │ │ └── M412.cpp │ │ │ │ └── trinamic │ │ │ │ │ ├── M122.cpp │ │ │ │ │ ├── M569.cpp │ │ │ │ │ ├── M906.cpp │ │ │ │ │ └── M911-M914.cpp │ │ │ ├── gcode.cpp │ │ │ ├── gcode.h │ │ │ ├── gcode_d.cpp │ │ │ ├── geometry │ │ │ │ ├── G17-G19.cpp │ │ │ │ ├── G53-G59.cpp │ │ │ │ ├── G92.cpp │ │ │ │ └── M206_M428.cpp │ │ │ ├── host │ │ │ │ ├── M110.cpp │ │ │ │ ├── M113.cpp │ │ │ │ ├── M114.cpp │ │ │ │ ├── M115.cpp │ │ │ │ ├── M118.cpp │ │ │ │ ├── M119.cpp │ │ │ │ ├── M16.cpp │ │ │ │ ├── M360.cpp │ │ │ │ └── M876.cpp │ │ │ ├── lcd │ │ │ │ ├── M0_M1.cpp │ │ │ │ ├── M117.cpp │ │ │ │ ├── M145.cpp │ │ │ │ ├── M250.cpp │ │ │ │ ├── M300.cpp │ │ │ │ ├── M73.cpp │ │ │ │ └── M995.cpp │ │ │ ├── motion │ │ │ │ ├── G0_G1.cpp │ │ │ │ ├── G2_G3.cpp │ │ │ │ ├── G4.cpp │ │ │ │ ├── G5.cpp │ │ │ │ ├── G6.cpp │ │ │ │ ├── G80.cpp │ │ │ │ └── M290.cpp │ │ │ ├── parser.cpp │ │ │ ├── parser.h │ │ │ ├── probe │ │ │ │ ├── G30.cpp │ │ │ │ ├── G31_G32.cpp │ │ │ │ ├── G38.cpp │ │ │ │ ├── M401_M402.cpp │ │ │ │ ├── M851.cpp │ │ │ │ └── M951.cpp │ │ │ ├── queue.cpp │ │ │ ├── queue.h │ │ │ ├── scara │ │ │ │ └── M360-M364.cpp │ │ │ ├── sd │ │ │ │ ├── M1001.cpp │ │ │ │ ├── M20.cpp │ │ │ │ ├── M21_M22.cpp │ │ │ │ ├── M23.cpp │ │ │ │ ├── M24_M25.cpp │ │ │ │ ├── M26.cpp │ │ │ │ ├── M27.cpp │ │ │ │ ├── M28_M29.cpp │ │ │ │ ├── M30.cpp │ │ │ │ ├── M32.cpp │ │ │ │ ├── M33.cpp │ │ │ │ ├── M34.cpp │ │ │ │ ├── M524.cpp │ │ │ │ ├── M808.cpp │ │ │ │ └── M928.cpp │ │ │ ├── stats │ │ │ │ ├── M31.cpp │ │ │ │ └── M75-M78.cpp │ │ │ ├── temp │ │ │ │ ├── M104_M109.cpp │ │ │ │ ├── M105.cpp │ │ │ │ ├── M106_M107.cpp │ │ │ │ ├── M140_M190.cpp │ │ │ │ ├── M141_M191.cpp │ │ │ │ ├── M155.cpp │ │ │ │ └── M303.cpp │ │ │ └── units │ │ │ │ ├── G20_G21.cpp │ │ │ │ ├── M149.cpp │ │ │ │ └── M82_M83.cpp │ │ │ ├── inc │ │ │ ├── Conditionals_LCD.h │ │ │ ├── Conditionals_adv.h │ │ │ ├── Conditionals_post.h │ │ │ ├── MarlinConfig.h │ │ │ ├── MarlinConfigPre.h │ │ │ ├── SanityCheck.h │ │ │ └── Version.h │ │ │ ├── lcd │ │ │ ├── HD44780 │ │ │ │ ├── lcdprint_hd44780.cpp │ │ │ │ ├── marlinui_HD44780.cpp │ │ │ │ └── marlinui_HD44780.h │ │ │ ├── TFTGLCD │ │ │ │ ├── lcdprint_TFTGLCD.cpp │ │ │ │ ├── marlinui_TFTGLCD.cpp │ │ │ │ └── marlinui_TFTGLCD.h │ │ │ ├── dogm │ │ │ │ ├── HAL_LCD_class_defines.h │ │ │ │ ├── HAL_LCD_com_defines.h │ │ │ │ ├── dogm_Bootscreen.h │ │ │ │ ├── dogm_Statusscreen.h │ │ │ │ ├── fontdata │ │ │ │ │ ├── fontdata_6x9_marlin.h │ │ │ │ │ ├── fontdata_ISO10646_1.h │ │ │ │ │ ├── langdata_an.h │ │ │ │ │ ├── langdata_bg.h │ │ │ │ │ ├── langdata_ca.h │ │ │ │ │ ├── langdata_cz.h │ │ │ │ │ ├── langdata_da.h │ │ │ │ │ ├── langdata_de.h │ │ │ │ │ ├── langdata_el.h │ │ │ │ │ ├── langdata_el_gr.h │ │ │ │ │ ├── langdata_en.h │ │ │ │ │ ├── langdata_es.h │ │ │ │ │ ├── langdata_eu.h │ │ │ │ │ ├── langdata_fi.h │ │ │ │ │ ├── langdata_fr.h │ │ │ │ │ ├── langdata_gl.h │ │ │ │ │ ├── langdata_hr.h │ │ │ │ │ ├── langdata_hu.h │ │ │ │ │ ├── langdata_it.h │ │ │ │ │ ├── langdata_jp_kana.h │ │ │ │ │ ├── langdata_ko_KR.h │ │ │ │ │ ├── langdata_nl.h │ │ │ │ │ ├── langdata_pl.h │ │ │ │ │ ├── langdata_pt.h │ │ │ │ │ ├── langdata_pt_br.h │ │ │ │ │ ├── langdata_ro.h │ │ │ │ │ ├── langdata_ru.h │ │ │ │ │ ├── langdata_sk.h │ │ │ │ │ ├── langdata_test.h │ │ │ │ │ ├── langdata_tr.h │ │ │ │ │ ├── langdata_uk.h │ │ │ │ │ ├── langdata_vi.h │ │ │ │ │ ├── langdata_zh_CN.h │ │ │ │ │ └── langdata_zh_TW.h │ │ │ │ ├── lcdprint_u8g.cpp │ │ │ │ ├── marlinui_DOGM.cpp │ │ │ │ ├── marlinui_DOGM.h │ │ │ │ ├── status │ │ │ │ │ ├── bed.h │ │ │ │ │ ├── chamber.h │ │ │ │ │ ├── combined.h │ │ │ │ │ ├── cutter.h │ │ │ │ │ ├── fan.h │ │ │ │ │ └── hotend.h │ │ │ │ ├── status_screen_DOGM.cpp │ │ │ │ ├── status_screen_lite_ST7920.cpp │ │ │ │ ├── status_screen_lite_ST7920.h │ │ │ │ ├── u8g_dev_ssd1306_sh1106_128x64_I2C.cpp │ │ │ │ ├── u8g_dev_st7565_64128n_HAL.cpp │ │ │ │ ├── u8g_dev_st7920_128x64_HAL.cpp │ │ │ │ ├── u8g_dev_tft_upscale_from_128x64.cpp │ │ │ │ ├── u8g_dev_uc1701_mini12864_HAL.cpp │ │ │ │ ├── u8g_fontutf8.cpp │ │ │ │ ├── u8g_fontutf8.h │ │ │ │ ├── ultralcd_st7920_u8glib_rrd_AVR.cpp │ │ │ │ └── ultralcd_st7920_u8glib_rrd_AVR.h │ │ │ ├── dwin │ │ │ │ ├── dwin_lcd.cpp │ │ │ │ ├── dwin_lcd.h │ │ │ │ └── e3v2 │ │ │ │ │ ├── README.md │ │ │ │ │ ├── dwin.cpp │ │ │ │ │ ├── dwin.h │ │ │ │ │ ├── rotary_encoder.cpp │ │ │ │ │ └── rotary_encoder.h │ │ │ ├── extui │ │ │ │ ├── anycubic_chiron_lcd.cpp │ │ │ │ ├── anycubic_i3mega_lcd.cpp │ │ │ │ ├── dgus_lcd.cpp │ │ │ │ ├── example.cpp │ │ │ │ ├── lib │ │ │ │ │ ├── anycubic_chiron │ │ │ │ │ │ ├── FileNavigator.cpp │ │ │ │ │ │ ├── FileNavigator.h │ │ │ │ │ │ ├── Tunes.cpp │ │ │ │ │ │ ├── Tunes.h │ │ │ │ │ │ ├── chiron_tft.cpp │ │ │ │ │ │ ├── chiron_tft.h │ │ │ │ │ │ └── chiron_tft_defs.h │ │ │ │ │ ├── anycubic_i3mega │ │ │ │ │ │ ├── anycubic_i3mega_lcd.cpp │ │ │ │ │ │ └── anycubic_i3mega_lcd.h │ │ │ │ │ ├── dgus │ │ │ │ │ │ ├── DGUSDisplay.cpp │ │ │ │ │ │ ├── DGUSDisplay.h │ │ │ │ │ │ ├── DGUSDisplayDef.h │ │ │ │ │ │ ├── DGUSScreenHandler.cpp │ │ │ │ │ │ ├── DGUSScreenHandler.h │ │ │ │ │ │ ├── DGUSVPVariable.h │ │ │ │ │ │ ├── fysetc │ │ │ │ │ │ │ ├── DGUSDisplayDef.cpp │ │ │ │ │ │ │ └── DGUSDisplayDef.h │ │ │ │ │ │ ├── hiprecy │ │ │ │ │ │ │ ├── DGUSDisplayDef.cpp │ │ │ │ │ │ │ └── DGUSDisplayDef.h │ │ │ │ │ │ └── origin │ │ │ │ │ │ │ ├── DGUSDisplayDef.cpp │ │ │ │ │ │ │ └── DGUSDisplayDef.h │ │ │ │ │ ├── ftdi_eve_touch_ui │ │ │ │ │ │ ├── archim2-flash │ │ │ │ │ │ │ ├── flash_storage.cpp │ │ │ │ │ │ │ ├── flash_storage.h │ │ │ │ │ │ │ ├── media_file_reader.cpp │ │ │ │ │ │ │ └── media_file_reader.h │ │ │ │ │ │ ├── compat.h │ │ │ │ │ │ ├── config.h │ │ │ │ │ │ ├── ftdi_eve_lib │ │ │ │ │ │ │ ├── LICENSE.txt │ │ │ │ │ │ │ ├── README.md │ │ │ │ │ │ │ ├── basic │ │ │ │ │ │ │ │ ├── boards.h │ │ │ │ │ │ │ │ ├── commands.cpp │ │ │ │ │ │ │ │ ├── commands.h │ │ │ │ │ │ │ │ ├── constants.h │ │ │ │ │ │ │ │ ├── display_list.h │ │ │ │ │ │ │ │ ├── ftdi_basic.h │ │ │ │ │ │ │ │ ├── registers_ft800.h │ │ │ │ │ │ │ │ ├── registers_ft810.h │ │ │ │ │ │ │ │ ├── resolutions.h │ │ │ │ │ │ │ │ ├── spi.cpp │ │ │ │ │ │ │ │ └── spi.h │ │ │ │ │ │ │ ├── compat.h │ │ │ │ │ │ │ ├── extended │ │ │ │ │ │ │ │ ├── bitmap_info.h │ │ │ │ │ │ │ │ ├── command_processor.cpp │ │ │ │ │ │ │ │ ├── command_processor.h │ │ │ │ │ │ │ │ ├── dl_cache.cpp │ │ │ │ │ │ │ │ ├── dl_cache.h │ │ │ │ │ │ │ │ ├── event_loop.cpp │ │ │ │ │ │ │ │ ├── event_loop.h │ │ │ │ │ │ │ │ ├── ftdi_extended.h │ │ │ │ │ │ │ │ ├── grid_layout.h │ │ │ │ │ │ │ │ ├── polygon.h │ │ │ │ │ │ │ │ ├── rgb_t.h │ │ │ │ │ │ │ │ ├── screen_types.cpp │ │ │ │ │ │ │ │ ├── screen_types.h │ │ │ │ │ │ │ │ ├── sound_list.h │ │ │ │ │ │ │ │ ├── sound_player.cpp │ │ │ │ │ │ │ │ ├── sound_player.h │ │ │ │ │ │ │ │ ├── text_box.cpp │ │ │ │ │ │ │ │ ├── text_box.h │ │ │ │ │ │ │ │ ├── text_ellipsis.cpp │ │ │ │ │ │ │ │ ├── text_ellipsis.h │ │ │ │ │ │ │ │ ├── tiny_timer.cpp │ │ │ │ │ │ │ │ ├── tiny_timer.h │ │ │ │ │ │ │ │ └── unicode │ │ │ │ │ │ │ │ │ ├── README.txt │ │ │ │ │ │ │ │ │ ├── cyrillic_char_set.cpp │ │ │ │ │ │ │ │ │ ├── cyrillic_char_set.h │ │ │ │ │ │ │ │ │ ├── cyrillic_char_set_bitmap_31.h │ │ │ │ │ │ │ │ │ ├── font_bitmaps.cpp │ │ │ │ │ │ │ │ │ ├── font_bitmaps.h │ │ │ │ │ │ │ │ │ ├── font_bitmaps │ │ │ │ │ │ │ │ │ ├── cyrillic_char_set_bitmap_31.png │ │ │ │ │ │ │ │ │ ├── cyrillic_char_set_bitmap_31.svg │ │ │ │ │ │ │ │ │ ├── romfont_31.pbm │ │ │ │ │ │ │ │ │ ├── romfont_31.png │ │ │ │ │ │ │ │ │ ├── western_char_set_bitmap_31.png │ │ │ │ │ │ │ │ │ └── western_char_set_bitmap_31.svg │ │ │ │ │ │ │ │ │ ├── font_size_t.cpp │ │ │ │ │ │ │ │ │ ├── font_size_t.h │ │ │ │ │ │ │ │ │ ├── standard_char_set.cpp │ │ │ │ │ │ │ │ │ ├── standard_char_set.h │ │ │ │ │ │ │ │ │ ├── unicode.cpp │ │ │ │ │ │ │ │ │ ├── unicode.h │ │ │ │ │ │ │ │ │ ├── western_char_set.cpp │ │ │ │ │ │ │ │ │ ├── western_char_set.h │ │ │ │ │ │ │ │ │ └── western_char_set_bitmap_31.h │ │ │ │ │ │ │ ├── extras │ │ │ │ │ │ │ │ ├── bitmap2cpp.py │ │ │ │ │ │ │ │ ├── circular_progress.h │ │ │ │ │ │ │ │ ├── poly_ui.h │ │ │ │ │ │ │ │ └── svg2cpp.py │ │ │ │ │ │ │ └── ftdi_eve_lib.h │ │ │ │ │ │ ├── language │ │ │ │ │ │ │ ├── language.cpp │ │ │ │ │ │ │ ├── language.h │ │ │ │ │ │ │ └── language_en.h │ │ │ │ │ │ ├── marlin_events.cpp │ │ │ │ │ │ ├── pin_mappings.h │ │ │ │ │ │ ├── screens │ │ │ │ │ │ │ ├── about_screen.cpp │ │ │ │ │ │ │ ├── advanced_settings_menu.cpp │ │ │ │ │ │ │ ├── alert_dialog_box.cpp │ │ │ │ │ │ │ ├── backlash_compensation_screen.cpp │ │ │ │ │ │ │ ├── base_numeric_adjustment_screen.cpp │ │ │ │ │ │ │ ├── base_screen.cpp │ │ │ │ │ │ │ ├── bed_mesh_screen.cpp │ │ │ │ │ │ │ ├── bio_advanced_settings.cpp │ │ │ │ │ │ │ ├── bio_confirm_home_e.cpp │ │ │ │ │ │ │ ├── bio_confirm_home_xyz.cpp │ │ │ │ │ │ │ ├── bio_main_menu.cpp │ │ │ │ │ │ │ ├── bio_printer_ui_landscape.h │ │ │ │ │ │ │ ├── bio_printer_ui_portrait.h │ │ │ │ │ │ │ ├── bio_printing_dialog_box.cpp │ │ │ │ │ │ │ ├── bio_status_screen.cpp │ │ │ │ │ │ │ ├── bio_tune_menu.cpp │ │ │ │ │ │ │ ├── boot_screen.cpp │ │ │ │ │ │ │ ├── case_light_screen.cpp │ │ │ │ │ │ │ ├── change_filament_screen.cpp │ │ │ │ │ │ │ ├── cocoa_press_advanced_settings_menu.cpp │ │ │ │ │ │ │ ├── cocoa_press_load_chocolate.cpp │ │ │ │ │ │ │ ├── cocoa_press_main_menu.cpp │ │ │ │ │ │ │ ├── cocoa_press_move_e_screen.cpp │ │ │ │ │ │ │ ├── cocoa_press_move_xyz_screen.cpp │ │ │ │ │ │ │ ├── cocoa_press_preheat_menu.cpp │ │ │ │ │ │ │ ├── cocoa_press_preheat_screen.cpp │ │ │ │ │ │ │ ├── cocoa_press_status_screen.cpp │ │ │ │ │ │ │ ├── cocoa_press_ui.h │ │ │ │ │ │ │ ├── cocoa_press_unload_cartridge.cpp │ │ │ │ │ │ │ ├── confirm_abort_print_dialog_box.cpp │ │ │ │ │ │ │ ├── confirm_auto_calibration_dialog_box.cpp │ │ │ │ │ │ │ ├── confirm_erase_flash_dialog_box.cpp │ │ │ │ │ │ │ ├── confirm_start_print_dialog_box.cpp │ │ │ │ │ │ │ ├── confirm_user_request_alert_box.cpp │ │ │ │ │ │ │ ├── custom_user_menus.cpp │ │ │ │ │ │ │ ├── default_acceleration_screen.cpp │ │ │ │ │ │ │ ├── developer_menu.cpp │ │ │ │ │ │ │ ├── dialog_box_base_class.cpp │ │ │ │ │ │ │ ├── display_tuning_screen.cpp │ │ │ │ │ │ │ ├── endstop_state_screen.cpp │ │ │ │ │ │ │ ├── feedrate_percent_screen.cpp │ │ │ │ │ │ │ ├── filament_menu.cpp │ │ │ │ │ │ │ ├── filament_runout_screen.cpp │ │ │ │ │ │ │ ├── files_screen.cpp │ │ │ │ │ │ │ ├── interface_settings_screen.cpp │ │ │ │ │ │ │ ├── interface_sounds_screen.cpp │ │ │ │ │ │ │ ├── jerk_screen.cpp │ │ │ │ │ │ │ ├── junction_deviation_screen.cpp │ │ │ │ │ │ │ ├── kill_screen.cpp │ │ │ │ │ │ │ ├── language_menu.cpp │ │ │ │ │ │ │ ├── leveling_menu.cpp │ │ │ │ │ │ │ ├── linear_advance_screen.cpp │ │ │ │ │ │ │ ├── lock_screen.cpp │ │ │ │ │ │ │ ├── main_menu.cpp │ │ │ │ │ │ │ ├── max_acceleration_screen.cpp │ │ │ │ │ │ │ ├── max_velocity_screen.cpp │ │ │ │ │ │ │ ├── media_player_screen.cpp │ │ │ │ │ │ │ ├── move_axis_screen.cpp │ │ │ │ │ │ │ ├── nozzle_offsets_screen.cpp │ │ │ │ │ │ │ ├── nudge_nozzle_screen.cpp │ │ │ │ │ │ │ ├── restore_failsafe_dialog_box.cpp │ │ │ │ │ │ │ ├── save_settings_dialog_box.cpp │ │ │ │ │ │ │ ├── screen_data.h │ │ │ │ │ │ │ ├── screens.cpp │ │ │ │ │ │ │ ├── screens.h │ │ │ │ │ │ │ ├── spinner_dialog_box.cpp │ │ │ │ │ │ │ ├── statistics_screen.cpp │ │ │ │ │ │ │ ├── status_screen.cpp │ │ │ │ │ │ │ ├── stepper_bump_sensitivity_screen.cpp │ │ │ │ │ │ │ ├── stepper_current_screen.cpp │ │ │ │ │ │ │ ├── steps_screen.cpp │ │ │ │ │ │ │ ├── stress_test_screen.cpp │ │ │ │ │ │ │ ├── string_format.cpp │ │ │ │ │ │ │ ├── string_format.h │ │ │ │ │ │ │ ├── temperature_screen.cpp │ │ │ │ │ │ │ ├── touch_calibration_screen.cpp │ │ │ │ │ │ │ ├── touch_registers_screen.cpp │ │ │ │ │ │ │ ├── tune_menu.cpp │ │ │ │ │ │ │ ├── widget_demo_screen.cpp │ │ │ │ │ │ │ └── z_offset_screen.cpp │ │ │ │ │ │ └── theme │ │ │ │ │ │ │ ├── bitmaps.h │ │ │ │ │ │ │ ├── bootscreen_logo_portrait.h │ │ │ │ │ │ │ ├── colors.h │ │ │ │ │ │ │ ├── fonts.h │ │ │ │ │ │ │ ├── marlin_bootscreen_landscape.h │ │ │ │ │ │ │ ├── marlin_bootscreen_portrait.h │ │ │ │ │ │ │ ├── sounds.cpp │ │ │ │ │ │ │ ├── sounds.h │ │ │ │ │ │ │ └── theme.h │ │ │ │ │ └── mks_ui │ │ │ │ │ │ ├── SPIFlashStorage.cpp │ │ │ │ │ │ ├── SPIFlashStorage.h │ │ │ │ │ │ ├── SPI_TFT.cpp │ │ │ │ │ │ ├── SPI_TFT.h │ │ │ │ │ │ ├── draw_about.cpp │ │ │ │ │ │ ├── draw_about.h │ │ │ │ │ │ ├── draw_acceleration_settings.cpp │ │ │ │ │ │ ├── draw_acceleration_settings.h │ │ │ │ │ │ ├── draw_advance_settings.cpp │ │ │ │ │ │ ├── draw_advance_settings.h │ │ │ │ │ │ ├── draw_auto_level_offset_settings.cpp │ │ │ │ │ │ ├── draw_auto_level_offset_settings.h │ │ │ │ │ │ ├── draw_baby_stepping.cpp │ │ │ │ │ │ ├── draw_baby_stepping.h │ │ │ │ │ │ ├── draw_change_speed.cpp │ │ │ │ │ │ ├── draw_change_speed.h │ │ │ │ │ │ ├── draw_dialog.cpp │ │ │ │ │ │ ├── draw_dialog.h │ │ │ │ │ │ ├── draw_eeprom_settings.cpp │ │ │ │ │ │ ├── draw_eeprom_settings.h │ │ │ │ │ │ ├── draw_encoder_settings.cpp │ │ │ │ │ │ ├── draw_encoder_settings.h │ │ │ │ │ │ ├── draw_error_message.cpp │ │ │ │ │ │ ├── draw_error_message.h │ │ │ │ │ │ ├── draw_extrusion.cpp │ │ │ │ │ │ ├── draw_extrusion.h │ │ │ │ │ │ ├── draw_fan.cpp │ │ │ │ │ │ ├── draw_fan.h │ │ │ │ │ │ ├── draw_filament_change.cpp │ │ │ │ │ │ ├── draw_filament_change.h │ │ │ │ │ │ ├── draw_filament_settings.cpp │ │ │ │ │ │ ├── draw_filament_settings.h │ │ │ │ │ │ ├── draw_home.cpp │ │ │ │ │ │ ├── draw_home.h │ │ │ │ │ │ ├── draw_homing_sensitivity_settings.cpp │ │ │ │ │ │ ├── draw_homing_sensitivity_settings.h │ │ │ │ │ │ ├── draw_jerk_settings.cpp │ │ │ │ │ │ ├── draw_jerk_settings.h │ │ │ │ │ │ ├── draw_keyboard.cpp │ │ │ │ │ │ ├── draw_keyboard.h │ │ │ │ │ │ ├── draw_language.cpp │ │ │ │ │ │ ├── draw_language.h │ │ │ │ │ │ ├── draw_level_settings.cpp │ │ │ │ │ │ ├── draw_level_settings.h │ │ │ │ │ │ ├── draw_machine_para.cpp │ │ │ │ │ │ ├── draw_machine_para.h │ │ │ │ │ │ ├── draw_machine_settings.cpp │ │ │ │ │ │ ├── draw_machine_settings.h │ │ │ │ │ │ ├── draw_manuaLevel.cpp │ │ │ │ │ │ ├── draw_manuaLevel.h │ │ │ │ │ │ ├── draw_manual_level_pos_settings.cpp │ │ │ │ │ │ ├── draw_manual_level_pos_settings.h │ │ │ │ │ │ ├── draw_max_feedrate_settings.cpp │ │ │ │ │ │ ├── draw_max_feedrate_settings.h │ │ │ │ │ │ ├── draw_motor_settings.cpp │ │ │ │ │ │ ├── draw_motor_settings.h │ │ │ │ │ │ ├── draw_move_motor.cpp │ │ │ │ │ │ ├── draw_move_motor.h │ │ │ │ │ │ ├── draw_number_key.cpp │ │ │ │ │ │ ├── draw_number_key.h │ │ │ │ │ │ ├── draw_operation.cpp │ │ │ │ │ │ ├── draw_operation.h │ │ │ │ │ │ ├── draw_pause_message.cpp │ │ │ │ │ │ ├── draw_pause_message.h │ │ │ │ │ │ ├── draw_pause_position.cpp │ │ │ │ │ │ ├── draw_pause_position.h │ │ │ │ │ │ ├── draw_preHeat.cpp │ │ │ │ │ │ ├── draw_preHeat.h │ │ │ │ │ │ ├── draw_print_file.cpp │ │ │ │ │ │ ├── draw_print_file.h │ │ │ │ │ │ ├── draw_printing.cpp │ │ │ │ │ │ ├── draw_printing.h │ │ │ │ │ │ ├── draw_ready_print.cpp │ │ │ │ │ │ ├── draw_ready_print.h │ │ │ │ │ │ ├── draw_set.cpp │ │ │ │ │ │ ├── draw_set.h │ │ │ │ │ │ ├── draw_step_settings.cpp │ │ │ │ │ │ ├── draw_step_settings.h │ │ │ │ │ │ ├── draw_tmc_current_settings.cpp │ │ │ │ │ │ ├── draw_tmc_current_settings.h │ │ │ │ │ │ ├── draw_tmc_step_mode_settings.cpp │ │ │ │ │ │ ├── draw_tmc_step_mode_settings.h │ │ │ │ │ │ ├── draw_tool.cpp │ │ │ │ │ │ ├── draw_tool.h │ │ │ │ │ │ ├── draw_touch_calibration.cpp │ │ │ │ │ │ ├── draw_touch_calibration.h │ │ │ │ │ │ ├── draw_ui.cpp │ │ │ │ │ │ ├── draw_ui.h │ │ │ │ │ │ ├── draw_wifi.cpp │ │ │ │ │ │ ├── draw_wifi.h │ │ │ │ │ │ ├── draw_wifi_list.cpp │ │ │ │ │ │ ├── draw_wifi_list.h │ │ │ │ │ │ ├── draw_wifi_settings.cpp │ │ │ │ │ │ ├── draw_wifi_settings.h │ │ │ │ │ │ ├── draw_wifi_tips.cpp │ │ │ │ │ │ ├── draw_wifi_tips.h │ │ │ │ │ │ ├── gb2312_puhui16.cpp │ │ │ │ │ │ ├── irq_overrid.cpp │ │ │ │ │ │ ├── mks_hardware_test.cpp │ │ │ │ │ │ ├── mks_hardware_test.h │ │ │ │ │ │ ├── pic_manager.cpp │ │ │ │ │ │ ├── pic_manager.h │ │ │ │ │ │ ├── printer_operation.cpp │ │ │ │ │ │ ├── printer_operation.h │ │ │ │ │ │ ├── tft_Language_en.h │ │ │ │ │ │ ├── tft_Language_fr.h │ │ │ │ │ │ ├── tft_Language_it.h │ │ │ │ │ │ ├── tft_Language_ru.h │ │ │ │ │ │ ├── tft_Language_s_cn.h │ │ │ │ │ │ ├── tft_Language_sp.h │ │ │ │ │ │ ├── tft_Language_t_cn.h │ │ │ │ │ │ ├── tft_lvgl_configuration.cpp │ │ │ │ │ │ ├── tft_lvgl_configuration.h │ │ │ │ │ │ ├── tft_multi_language.cpp │ │ │ │ │ │ ├── tft_multi_language.h │ │ │ │ │ │ ├── wifiSerial.cpp │ │ │ │ │ │ ├── wifiSerial.h │ │ │ │ │ │ ├── wifi_module.cpp │ │ │ │ │ │ ├── wifi_module.h │ │ │ │ │ │ ├── wifi_upload.cpp │ │ │ │ │ │ └── wifi_upload.h │ │ │ │ ├── malyan_lcd.cpp │ │ │ │ ├── ui_api.cpp │ │ │ │ └── ui_api.h │ │ │ ├── fontutils.cpp │ │ │ ├── fontutils.h │ │ │ ├── language │ │ │ │ ├── language_an.h │ │ │ │ ├── language_bg.h │ │ │ │ ├── language_ca.h │ │ │ │ ├── language_cz.h │ │ │ │ ├── language_da.h │ │ │ │ ├── language_de.h │ │ │ │ ├── language_el.h │ │ │ │ ├── language_el_gr.h │ │ │ │ ├── language_en.h │ │ │ │ ├── language_es.h │ │ │ │ ├── language_eu.h │ │ │ │ ├── language_fi.h │ │ │ │ ├── language_fr.h │ │ │ │ ├── language_gl.h │ │ │ │ ├── language_hr.h │ │ │ │ ├── language_hu.h │ │ │ │ ├── language_it.h │ │ │ │ ├── language_jp_kana.h │ │ │ │ ├── language_ko_KR.h │ │ │ │ ├── language_nl.h │ │ │ │ ├── language_pl.h │ │ │ │ ├── language_pt.h │ │ │ │ ├── language_pt_br.h │ │ │ │ ├── language_ro.h │ │ │ │ ├── language_ru.h │ │ │ │ ├── language_sk.h │ │ │ │ ├── language_test.h │ │ │ │ ├── language_tr.h │ │ │ │ ├── language_uk.h │ │ │ │ ├── language_vi.h │ │ │ │ ├── language_zh_CN.h │ │ │ │ └── language_zh_TW.h │ │ │ ├── lcdprint.cpp │ │ │ ├── lcdprint.h │ │ │ ├── marlinui.cpp │ │ │ ├── marlinui.h │ │ │ ├── menu │ │ │ │ ├── game │ │ │ │ │ ├── brickout.cpp │ │ │ │ │ ├── brickout.h │ │ │ │ │ ├── game.cpp │ │ │ │ │ ├── game.h │ │ │ │ │ ├── invaders.cpp │ │ │ │ │ ├── invaders.h │ │ │ │ │ ├── maze.cpp │ │ │ │ │ ├── maze.h │ │ │ │ │ ├── snake.cpp │ │ │ │ │ ├── snake.h │ │ │ │ │ └── types.h │ │ │ │ ├── menu.cpp │ │ │ │ ├── menu.h │ │ │ │ ├── menu_addon.h │ │ │ │ ├── menu_advanced.cpp │ │ │ │ ├── menu_backlash.cpp │ │ │ │ ├── menu_bed_corners.cpp │ │ │ │ ├── menu_bed_leveling.cpp │ │ │ │ ├── menu_cancelobject.cpp │ │ │ │ ├── menu_configuration.cpp │ │ │ │ ├── menu_custom.cpp │ │ │ │ ├── menu_delta_calibrate.cpp │ │ │ │ ├── menu_filament.cpp │ │ │ │ ├── menu_game.cpp │ │ │ │ ├── menu_info.cpp │ │ │ │ ├── menu_item.h │ │ │ │ ├── menu_job_recovery.cpp │ │ │ │ ├── menu_language.cpp │ │ │ │ ├── menu_led.cpp │ │ │ │ ├── menu_main.cpp │ │ │ │ ├── menu_media.cpp │ │ │ │ ├── menu_mixer.cpp │ │ │ │ ├── menu_mmu2.cpp │ │ │ │ ├── menu_mmu2.h │ │ │ │ ├── menu_motion.cpp │ │ │ │ ├── menu_password.cpp │ │ │ │ ├── menu_power_monitor.cpp │ │ │ │ ├── menu_probe_offset.cpp │ │ │ │ ├── menu_spindle_laser.cpp │ │ │ │ ├── menu_temperature.cpp │ │ │ │ ├── menu_tmc.cpp │ │ │ │ ├── menu_touch_screen.cpp │ │ │ │ ├── menu_tramming.cpp │ │ │ │ ├── menu_tune.cpp │ │ │ │ └── menu_ubl.cpp │ │ │ ├── scaled_tft.h │ │ │ ├── tft │ │ │ │ ├── bitmaps │ │ │ │ │ ├── back.bmp │ │ │ │ │ ├── bed.bmp │ │ │ │ │ ├── bed_heated.bmp │ │ │ │ │ ├── btn_64x52_rounded.bmp │ │ │ │ │ ├── cancel.bmp │ │ │ │ │ ├── chamber.bmp │ │ │ │ │ ├── chamber_heated.bmp │ │ │ │ │ ├── confirm.bmp │ │ │ │ │ ├── decrease.bmp │ │ │ │ │ ├── directory.bmp │ │ │ │ │ ├── down.bmp │ │ │ │ │ ├── fan0.bmp │ │ │ │ │ ├── fan1.bmp │ │ │ │ │ ├── fan_fast0.bmp │ │ │ │ │ ├── fan_fast1.bmp │ │ │ │ │ ├── fan_slow0.bmp │ │ │ │ │ ├── fan_slow1.bmp │ │ │ │ │ ├── feedrate.bmp │ │ │ │ │ ├── flowrate.bmp │ │ │ │ │ ├── home.bmp │ │ │ │ │ ├── hotend.bmp │ │ │ │ │ ├── increase.bmp │ │ │ │ │ ├── left.bmp │ │ │ │ │ ├── leveling.bmp │ │ │ │ │ ├── marlin-logo │ │ │ │ │ │ ├── Marlin-1500x319.png │ │ │ │ │ │ ├── Marlin-195x59.png │ │ │ │ │ │ ├── Marlin-228x255-greyscale.png │ │ │ │ │ │ ├── Marlin-228x255.png │ │ │ │ │ │ ├── Marlin-280x200.png │ │ │ │ │ │ ├── Marlin-320x240.png │ │ │ │ │ │ ├── Marlin-480x319.png │ │ │ │ │ │ └── Marlin-480x320.png │ │ │ │ │ ├── menu.bmp │ │ │ │ │ ├── pause.bmp │ │ │ │ │ ├── refresh.bmp │ │ │ │ │ ├── right.bmp │ │ │ │ │ ├── sd.bmp │ │ │ │ │ ├── settings.bmp │ │ │ │ │ └── up.bmp │ │ │ │ ├── canvas.cpp │ │ │ │ ├── canvas.h │ │ │ │ ├── fontdata │ │ │ │ │ ├── fontdata_10x20.cpp │ │ │ │ │ ├── fontdata_ISO10646_1.cpp │ │ │ │ │ ├── helvetica_12_bold.cpp │ │ │ │ │ ├── helvetica_14.cpp │ │ │ │ │ ├── helvetica_18.cpp │ │ │ │ │ └── profont_22.cpp │ │ │ │ ├── images │ │ │ │ │ ├── back_32x32x4.cpp │ │ │ │ │ ├── background_320x30x16.cpp │ │ │ │ │ ├── bootscreen_112x38x1.cpp │ │ │ │ │ ├── bootscreen_195x59x16.cpp │ │ │ │ │ ├── bootscreen_228x255x2.cpp │ │ │ │ │ ├── bootscreen_228x255x4.cpp │ │ │ │ │ ├── bootscreen_320x240x16.cpp │ │ │ │ │ ├── bootscreen_480x320x16.cpp │ │ │ │ │ ├── btn_rounded_64x52x4.cpp │ │ │ │ │ ├── cancel_64x64x4.cpp │ │ │ │ │ ├── chamber_64x64x4.cpp │ │ │ │ │ ├── confirm_64x64x4.cpp │ │ │ │ │ ├── decrease_64x64x4.cpp │ │ │ │ │ ├── directory_32x32x4.cpp │ │ │ │ │ ├── down_32x32x4.cpp │ │ │ │ │ ├── fan_64x64x4.cpp │ │ │ │ │ ├── fan_fast_64x64x4.cpp │ │ │ │ │ ├── fan_slow_64x64x4.cpp │ │ │ │ │ ├── feedrate_32x32x4.cpp │ │ │ │ │ ├── flowrate_32x32x4.cpp │ │ │ │ │ ├── heated_bed_64x64x4.cpp │ │ │ │ │ ├── home_64x64x4.cpp │ │ │ │ │ ├── hotend_64x64x4.cpp │ │ │ │ │ ├── increase_64x64x4.cpp │ │ │ │ │ ├── left_32x32x4.cpp │ │ │ │ │ ├── leveling_32x32x4.cpp │ │ │ │ │ ├── menu_64x64x4.cpp │ │ │ │ │ ├── pause_64x64x4.cpp │ │ │ │ │ ├── refresh_32x32x4.cpp │ │ │ │ │ ├── right_32x32x4.cpp │ │ │ │ │ ├── sd_64x64x4.cpp │ │ │ │ │ ├── settings_64x64x4.cpp │ │ │ │ │ ├── slider_8x16x4.cpp │ │ │ │ │ └── up_32x32x4.cpp │ │ │ │ ├── tft.cpp │ │ │ │ ├── tft.h │ │ │ │ ├── tft_color.h │ │ │ │ ├── tft_image.cpp │ │ │ │ ├── tft_image.h │ │ │ │ ├── tft_queue.cpp │ │ │ │ ├── tft_queue.h │ │ │ │ ├── tft_string.cpp │ │ │ │ ├── tft_string.h │ │ │ │ ├── touch.cpp │ │ │ │ ├── touch.h │ │ │ │ ├── ui_320x240.cpp │ │ │ │ ├── ui_320x240.h │ │ │ │ ├── ui_480x320.cpp │ │ │ │ └── ui_480x320.h │ │ │ ├── tft_io │ │ │ │ ├── ili9328.h │ │ │ │ ├── ili9341.h │ │ │ │ ├── ili9488.h │ │ │ │ ├── r65105.h │ │ │ │ ├── ssd1963.h │ │ │ │ ├── st7735.h │ │ │ │ ├── st7789v.h │ │ │ │ ├── st7796s.h │ │ │ │ ├── tft_io.cpp │ │ │ │ ├── tft_io.h │ │ │ │ ├── touch_calibration.cpp │ │ │ │ └── touch_calibration.h │ │ │ ├── thermistornames.h │ │ │ └── touch │ │ │ │ ├── touch_buttons.cpp │ │ │ │ └── touch_buttons.h │ │ │ ├── libs │ │ │ ├── BL24CXX.cpp │ │ │ ├── BL24CXX.h │ │ │ ├── L64XX │ │ │ │ ├── L64XX_Marlin.cpp │ │ │ │ ├── L64XX_Marlin.h │ │ │ │ └── README.md │ │ │ ├── W25Qxx.cpp │ │ │ ├── W25Qxx.h │ │ │ ├── bresenham.h │ │ │ ├── buzzer.cpp │ │ │ ├── buzzer.h │ │ │ ├── circularqueue.h │ │ │ ├── crc16.cpp │ │ │ ├── crc16.h │ │ │ ├── duration_t.h │ │ │ ├── heatshrink │ │ │ │ ├── LICENSE │ │ │ │ ├── heatshrink_common.h │ │ │ │ ├── heatshrink_config.h │ │ │ │ ├── heatshrink_decoder.cpp │ │ │ │ └── heatshrink_decoder.h │ │ │ ├── hex_print.cpp │ │ │ ├── hex_print.h │ │ │ ├── least_squares_fit.cpp │ │ │ ├── least_squares_fit.h │ │ │ ├── nozzle.cpp │ │ │ ├── nozzle.h │ │ │ ├── numtostr.cpp │ │ │ ├── numtostr.h │ │ │ ├── private_spi.h │ │ │ ├── softspi.h │ │ │ ├── stopwatch.cpp │ │ │ ├── stopwatch.h │ │ │ ├── vector_3.cpp │ │ │ └── vector_3.h │ │ │ ├── module │ │ │ ├── delta.cpp │ │ │ ├── delta.h │ │ │ ├── endstops.cpp │ │ │ ├── endstops.h │ │ │ ├── motion.cpp │ │ │ ├── motion.h │ │ │ ├── planner.cpp │ │ │ ├── planner.h │ │ │ ├── planner_bezier.cpp │ │ │ ├── planner_bezier.h │ │ │ ├── printcounter.cpp │ │ │ ├── printcounter.h │ │ │ ├── probe.cpp │ │ │ ├── probe.h │ │ │ ├── scara.cpp │ │ │ ├── scara.h │ │ │ ├── servo.cpp │ │ │ ├── servo.h │ │ │ ├── settings.cpp │ │ │ ├── settings.h │ │ │ ├── speed_lookuptable.h │ │ │ ├── stepper.cpp │ │ │ ├── stepper.h │ │ │ ├── stepper │ │ │ │ ├── L64xx.cpp │ │ │ │ ├── L64xx.h │ │ │ │ ├── TMC26X.cpp │ │ │ │ ├── TMC26X.h │ │ │ │ ├── indirection.cpp │ │ │ │ ├── indirection.h │ │ │ │ ├── trinamic.cpp │ │ │ │ └── trinamic.h │ │ │ ├── temperature.cpp │ │ │ ├── temperature.h │ │ │ ├── thermistor │ │ │ │ ├── thermistor_1.h │ │ │ │ ├── thermistor_10.h │ │ │ │ ├── thermistor_1010.h │ │ │ │ ├── thermistor_1047.h │ │ │ │ ├── thermistor_11.h │ │ │ │ ├── thermistor_110.h │ │ │ │ ├── thermistor_12.h │ │ │ │ ├── thermistor_13.h │ │ │ │ ├── thermistor_147.h │ │ │ │ ├── thermistor_15.h │ │ │ │ ├── thermistor_17.h │ │ │ │ ├── thermistor_18.h │ │ │ │ ├── thermistor_2.h │ │ │ │ ├── thermistor_20.h │ │ │ │ ├── thermistor_201.h │ │ │ │ ├── thermistor_202.h │ │ │ │ ├── thermistor_21.h │ │ │ │ ├── thermistor_22.h │ │ │ │ ├── thermistor_23.h │ │ │ │ ├── thermistor_3.h │ │ │ │ ├── thermistor_30.h │ │ │ │ ├── thermistor_331.h │ │ │ │ ├── thermistor_332.h │ │ │ │ ├── thermistor_4.h │ │ │ │ ├── thermistor_5.h │ │ │ │ ├── thermistor_501.h │ │ │ │ ├── thermistor_502.h │ │ │ │ ├── thermistor_503.h │ │ │ │ ├── thermistor_51.h │ │ │ │ ├── thermistor_512.h │ │ │ │ ├── thermistor_52.h │ │ │ │ ├── thermistor_55.h │ │ │ │ ├── thermistor_6.h │ │ │ │ ├── thermistor_60.h │ │ │ │ ├── thermistor_61.h │ │ │ │ ├── thermistor_66.h │ │ │ │ ├── thermistor_666.h │ │ │ │ ├── thermistor_67.h │ │ │ │ ├── thermistor_7.h │ │ │ │ ├── thermistor_70.h │ │ │ │ ├── thermistor_71.h │ │ │ │ ├── thermistor_75.h │ │ │ │ ├── thermistor_8.h │ │ │ │ ├── thermistor_9.h │ │ │ │ ├── thermistor_99.h │ │ │ │ ├── thermistor_998.h │ │ │ │ ├── thermistor_999.h │ │ │ │ └── thermistors.h │ │ │ ├── tool_change.cpp │ │ │ └── tool_change.h │ │ │ ├── pins │ │ │ ├── esp32 │ │ │ │ ├── pins_E4D.h │ │ │ │ ├── pins_ESP32.h │ │ │ │ ├── pins_FYSETC_E4.h │ │ │ │ ├── pins_MRR_ESPA.h │ │ │ │ └── pins_MRR_ESPE.h │ │ │ ├── linux │ │ │ │ └── pins_RAMPS_LINUX.h │ │ │ ├── lpc1768 │ │ │ │ ├── pins_AZSMZ_MINI.h │ │ │ │ ├── pins_BIQU_B300_V1.0.h │ │ │ │ ├── pins_BIQU_BQ111_A4.h │ │ │ │ ├── pins_BTT_SKR_V1_1.h │ │ │ │ ├── pins_BTT_SKR_V1_3.h │ │ │ │ ├── pins_BTT_SKR_V1_4.h │ │ │ │ ├── pins_BTT_SKR_common.h │ │ │ │ ├── pins_GMARSH_X6_REV1.h │ │ │ │ ├── pins_MKS_SBASE.h │ │ │ │ ├── pins_MKS_SGEN_L.h │ │ │ │ ├── pins_RAMPS_RE_ARM.h │ │ │ │ └── pins_SELENA_COMPACT.h │ │ │ ├── lpc1769 │ │ │ │ ├── pins_AZTEEG_X5_GT.h │ │ │ │ ├── pins_AZTEEG_X5_MINI.h │ │ │ │ ├── pins_AZTEEG_X5_MINI_WIFI.h │ │ │ │ ├── pins_BTT_SKR_E3_TURBO.h │ │ │ │ ├── pins_BTT_SKR_V1_4_TURBO.h │ │ │ │ ├── pins_COHESION3D_MINI.h │ │ │ │ ├── pins_COHESION3D_REMIX.h │ │ │ │ ├── pins_FLY_CDY.h │ │ │ │ ├── pins_MKS_SGEN.h │ │ │ │ ├── pins_MKS_SGEN_L_V2.h │ │ │ │ ├── pins_SMOOTHIEBOARD.h │ │ │ │ └── pins_TH3D_EZBOARD.h │ │ │ ├── mega │ │ │ │ ├── pins_CHEAPTRONIC.h │ │ │ │ ├── pins_CHEAPTRONICv2.h │ │ │ │ ├── pins_CNCONTROLS_11.h │ │ │ │ ├── pins_CNCONTROLS_12.h │ │ │ │ ├── pins_CNCONTROLS_15.h │ │ │ │ ├── pins_EINSTART-S.h │ │ │ │ ├── pins_ELEFU_3.h │ │ │ │ ├── pins_GT2560_REV_A.h │ │ │ │ ├── pins_GT2560_REV_A_PLUS.h │ │ │ │ ├── pins_GT2560_V3.h │ │ │ │ ├── pins_GT2560_V3_A20.h │ │ │ │ ├── pins_GT2560_V3_MC2.h │ │ │ │ ├── pins_HJC2560C_REV2.h │ │ │ │ ├── pins_INTAMSYS40.h │ │ │ │ ├── pins_LEAPFROG.h │ │ │ │ ├── pins_LEAPFROG_XEED2015.h │ │ │ │ ├── pins_MEGACONTROLLER.h │ │ │ │ ├── pins_MEGATRONICS.h │ │ │ │ ├── pins_MEGATRONICS_2.h │ │ │ │ ├── pins_MEGATRONICS_3.h │ │ │ │ ├── pins_MIGHTYBOARD_REVE.h │ │ │ │ ├── pins_MINITRONICS.h │ │ │ │ ├── pins_OVERLORD.h │ │ │ │ ├── pins_PICA.h │ │ │ │ ├── pins_PICAOLD.h │ │ │ │ ├── pins_SILVER_GATE.h │ │ │ │ └── pins_WANHAO_ONEPLUS.h │ │ │ ├── pins.h │ │ │ ├── pinsDebug.h │ │ │ ├── pinsDebug_list.h │ │ │ ├── pins_postprocess.h │ │ │ ├── rambo │ │ │ │ ├── pins_EINSY_RAMBO.h │ │ │ │ ├── pins_EINSY_RETRO.h │ │ │ │ ├── pins_MINIRAMBO.h │ │ │ │ ├── pins_RAMBO.h │ │ │ │ └── pins_SCOOVO_X9H.h │ │ │ ├── ramps │ │ │ │ ├── pins_3DRAG.h │ │ │ │ ├── pins_AZTEEG_X3.h │ │ │ │ ├── pins_AZTEEG_X3_PRO.h │ │ │ │ ├── pins_BAM_DICE_DUE.h │ │ │ │ ├── pins_BIQU_KFB_2.h │ │ │ │ ├── pins_BQ_ZUM_MEGA_3D.h │ │ │ │ ├── pins_COPYMASTER_3D.h │ │ │ │ ├── pins_DAGOMA_F5.h │ │ │ │ ├── pins_DUPLICATOR_I3_PLUS.h │ │ │ │ ├── pins_FELIX2.h │ │ │ │ ├── pins_FORMBOT_RAPTOR.h │ │ │ │ ├── pins_FORMBOT_RAPTOR2.h │ │ │ │ ├── pins_FORMBOT_TREX2PLUS.h │ │ │ │ ├── pins_FORMBOT_TREX3.h │ │ │ │ ├── pins_FYSETC_F6_13.h │ │ │ │ ├── pins_FYSETC_F6_14.h │ │ │ │ ├── pins_K8200.h │ │ │ │ ├── pins_K8400.h │ │ │ │ ├── pins_K8600.h │ │ │ │ ├── pins_K8800.h │ │ │ │ ├── pins_LONGER3D_LKx_PRO.h │ │ │ │ ├── pins_MAKEBOARD_MINI.h │ │ │ │ ├── pins_MKS_BASE_10.h │ │ │ │ ├── pins_MKS_BASE_14.h │ │ │ │ ├── pins_MKS_BASE_15.h │ │ │ │ ├── pins_MKS_BASE_16.h │ │ │ │ ├── pins_MKS_BASE_HEROIC.h │ │ │ │ ├── pins_MKS_BASE_common.h │ │ │ │ ├── pins_MKS_GEN_13.h │ │ │ │ ├── pins_MKS_GEN_L.h │ │ │ │ ├── pins_MKS_GEN_L_V2.h │ │ │ │ ├── pins_MKS_GEN_L_V21.h │ │ │ │ ├── pins_ORTUR_4.h │ │ │ │ ├── pins_RAMPS.h │ │ │ │ ├── pins_RAMPS_13.h │ │ │ │ ├── pins_RAMPS_CREALITY.h │ │ │ │ ├── pins_RAMPS_ENDER_4.h │ │ │ │ ├── pins_RAMPS_OLD.h │ │ │ │ ├── pins_RAMPS_PLUS.h │ │ │ │ ├── pins_RAMPS_S_12.h │ │ │ │ ├── pins_RIGIDBOARD.h │ │ │ │ ├── pins_RIGIDBOARD_V2.h │ │ │ │ ├── pins_RL200.h │ │ │ │ ├── pins_RUMBA.h │ │ │ │ ├── pins_RUMBA_RAISE3D.h │ │ │ │ ├── pins_SAINSMART_2IN1.h │ │ │ │ ├── pins_TANGO.h │ │ │ │ ├── pins_TENLOG_D3_HERO.h │ │ │ │ ├── pins_TRIGORILLA_13.h │ │ │ │ ├── pins_TRIGORILLA_14.h │ │ │ │ ├── pins_TRONXY_V3_1_0.h │ │ │ │ ├── pins_TT_OSCAR.h │ │ │ │ ├── pins_ULTIMAIN_2.h │ │ │ │ ├── pins_ULTIMAKER.h │ │ │ │ ├── pins_ULTIMAKER_OLD.h │ │ │ │ ├── pins_VORON.h │ │ │ │ ├── pins_ZRIB_V20.h │ │ │ │ ├── pins_ZRIB_V52.h │ │ │ │ └── pins_Z_BOLT_X_SERIES.h │ │ │ ├── sam │ │ │ │ ├── pins_ADSK.h │ │ │ │ ├── pins_ALLIGATOR_R2.h │ │ │ │ ├── pins_ARCHIM1.h │ │ │ │ ├── pins_ARCHIM2.h │ │ │ │ ├── pins_CNCONTROLS_15D.h │ │ │ │ ├── pins_DUE3DOM.h │ │ │ │ ├── pins_DUE3DOM_MINI.h │ │ │ │ ├── pins_PRINTRBOARD_G2.h │ │ │ │ ├── pins_RADDS.h │ │ │ │ ├── pins_RAMPS4DUE.h │ │ │ │ ├── pins_RAMPS_DUO.h │ │ │ │ ├── pins_RAMPS_FD_V1.h │ │ │ │ ├── pins_RAMPS_FD_V2.h │ │ │ │ ├── pins_RAMPS_SMART.h │ │ │ │ ├── pins_RURAMPS4D_11.h │ │ │ │ ├── pins_RURAMPS4D_13.h │ │ │ │ └── pins_ULTRATRONICS_PRO.h │ │ │ ├── samd │ │ │ │ └── pins_RAMPS_144.h │ │ │ ├── sanguino │ │ │ │ ├── pins_ANET_10.h │ │ │ │ ├── pins_AZTEEG_X1.h │ │ │ │ ├── pins_GEN3_MONOLITHIC.h │ │ │ │ ├── pins_GEN3_PLUS.h │ │ │ │ ├── pins_GEN6.h │ │ │ │ ├── pins_GEN6_DELUXE.h │ │ │ │ ├── pins_GEN7_12.h │ │ │ │ ├── pins_GEN7_13.h │ │ │ │ ├── pins_GEN7_14.h │ │ │ │ ├── pins_GEN7_CUSTOM.h │ │ │ │ ├── pins_MELZI.h │ │ │ │ ├── pins_MELZI_CREALITY.h │ │ │ │ ├── pins_MELZI_MAKR3D.h │ │ │ │ ├── pins_MELZI_MALYAN.h │ │ │ │ ├── pins_MELZI_TRONXY.h │ │ │ │ ├── pins_MELZI_V2.h │ │ │ │ ├── pins_OMCA.h │ │ │ │ ├── pins_OMCA_A.h │ │ │ │ ├── pins_SANGUINOLOLU_11.h │ │ │ │ ├── pins_SANGUINOLOLU_12.h │ │ │ │ ├── pins_SETHI.h │ │ │ │ ├── pins_STB_11.h │ │ │ │ └── pins_ZMIB_V2.h │ │ │ ├── sensitive_pins.h │ │ │ ├── stm32f0 │ │ │ │ ├── pins_MALYAN_M200_V2.h │ │ │ │ └── pins_MALYAN_M300.h │ │ │ ├── stm32f1 │ │ │ │ ├── pins_BEAST.h │ │ │ │ ├── pins_BTT_SKR_CR6.h │ │ │ │ ├── pins_BTT_SKR_E3_DIP.h │ │ │ │ ├── pins_BTT_SKR_MINI_E3_V1_0.h │ │ │ │ ├── pins_BTT_SKR_MINI_E3_V1_2.h │ │ │ │ ├── pins_BTT_SKR_MINI_E3_V2_0.h │ │ │ │ ├── pins_BTT_SKR_MINI_E3_common.h │ │ │ │ ├── pins_BTT_SKR_MINI_MZ_V1_0.h │ │ │ │ ├── pins_BTT_SKR_MINI_V1_1.h │ │ │ │ ├── pins_CCROBOT_MEEB_3DP.h │ │ │ │ ├── pins_CHITU3D.h │ │ │ │ ├── pins_CHITU3D_V5.h │ │ │ │ ├── pins_CHITU3D_V6.h │ │ │ │ ├── pins_CREALITY_V4.h │ │ │ │ ├── pins_CREALITY_V4210.h │ │ │ │ ├── pins_CREALITY_V427.h │ │ │ │ ├── pins_CREALITY_V431.h │ │ │ │ ├── pins_CREALITY_V452.h │ │ │ │ ├── pins_CREALITY_V453.h │ │ │ │ ├── pins_CREALITY_V45x.h │ │ │ │ ├── pins_FLSUN_HISPEED.h │ │ │ │ ├── pins_FLY_MINI.h │ │ │ │ ├── pins_FYSETC_AIO_II.h │ │ │ │ ├── pins_FYSETC_CHEETAH.h │ │ │ │ ├── pins_FYSETC_CHEETAH_V12.h │ │ │ │ ├── pins_GTM32_MINI.h │ │ │ │ ├── pins_GTM32_MINI_A30.h │ │ │ │ ├── pins_GTM32_PRO_VB.h │ │ │ │ ├── pins_GTM32_REV_B.h │ │ │ │ ├── pins_JGAURORA_A5S_A1.h │ │ │ │ ├── pins_LONGER3D_LK.h │ │ │ │ ├── pins_MALYAN_M200.h │ │ │ │ ├── pins_MKS_ROBIN.h │ │ │ │ ├── pins_MKS_ROBIN_E3.h │ │ │ │ ├── pins_MKS_ROBIN_E3D.h │ │ │ │ ├── pins_MKS_ROBIN_E3D_V1_1.h │ │ │ │ ├── pins_MKS_ROBIN_E3P.h │ │ │ │ ├── pins_MKS_ROBIN_E3_V1_1.h │ │ │ │ ├── pins_MKS_ROBIN_E3_V1_1_common.h │ │ │ │ ├── pins_MKS_ROBIN_E3_common.h │ │ │ │ ├── pins_MKS_ROBIN_LITE.h │ │ │ │ ├── pins_MKS_ROBIN_LITE3.h │ │ │ │ ├── pins_MKS_ROBIN_MINI.h │ │ │ │ ├── pins_MKS_ROBIN_NANO.h │ │ │ │ ├── pins_MKS_ROBIN_NANO_V2.h │ │ │ │ ├── pins_MKS_ROBIN_PRO.h │ │ │ │ ├── pins_MORPHEUS.h │ │ │ │ ├── pins_STM32F1R.h │ │ │ │ ├── pins_STM3R_MINI.h │ │ │ │ └── pins_TRIGORILLA_PRO.h │ │ │ ├── stm32f4 │ │ │ │ ├── pins_ANET_ET4.h │ │ │ │ ├── pins_ANET_ET4P.h │ │ │ │ ├── pins_ARMED.h │ │ │ │ ├── pins_BLACK_STM32F407VE.h │ │ │ │ ├── pins_BTT_BTT002_V1_0.h │ │ │ │ ├── pins_BTT_GTR_V1_0.h │ │ │ │ ├── pins_BTT_SKR_PRO_V1_1.h │ │ │ │ ├── pins_BTT_SKR_PRO_V1_2.h │ │ │ │ ├── pins_BTT_SKR_PRO_common.h │ │ │ │ ├── pins_FLYF407ZG.h │ │ │ │ ├── pins_FYSETC_S6.h │ │ │ │ ├── pins_FYSETC_S6_V2_0.h │ │ │ │ ├── pins_LERDGE_K.h │ │ │ │ ├── pins_LERDGE_S.h │ │ │ │ ├── pins_LERDGE_X.h │ │ │ │ ├── pins_MKS_ROBIN2.h │ │ │ │ ├── pins_MKS_ROBIN_NANO_V3.h │ │ │ │ ├── pins_MKS_ROBIN_PRO_V2.h │ │ │ │ ├── pins_RUMBA32_AUS3D.h │ │ │ │ ├── pins_RUMBA32_MKS.h │ │ │ │ ├── pins_RUMBA32_common.h │ │ │ │ ├── pins_STEVAL_3DP001V1.h │ │ │ │ └── pins_VAKE403D.h │ │ │ ├── stm32f7 │ │ │ │ ├── pins_NUCLEO_F767ZI.h │ │ │ │ └── pins_REMRAM_V1.h │ │ │ ├── teensy2 │ │ │ │ ├── pins_5DPRINT.h │ │ │ │ ├── pins_BRAINWAVE.h │ │ │ │ ├── pins_BRAINWAVE_PRO.h │ │ │ │ ├── pins_PRINTRBOARD.h │ │ │ │ ├── pins_PRINTRBOARD_REVF.h │ │ │ │ ├── pins_SAV_MKI.h │ │ │ │ ├── pins_TEENSY2.h │ │ │ │ └── pins_TEENSYLU.h │ │ │ ├── teensy3 │ │ │ │ ├── pins_TEENSY31_32.h │ │ │ │ └── pins_TEENSY35_36.h │ │ │ └── teensy4 │ │ │ │ ├── pins_T41U5XBB.h │ │ │ │ └── pins_TEENSY41.h │ │ │ └── sd │ │ │ ├── Sd2Card.cpp │ │ │ ├── Sd2Card.h │ │ │ ├── Sd2Card_sdio.h │ │ │ ├── SdBaseFile.cpp │ │ │ ├── SdBaseFile.h │ │ │ ├── SdFatConfig.h │ │ │ ├── SdFatStructs.h │ │ │ ├── SdFatUtil.cpp │ │ │ ├── SdFatUtil.h │ │ │ ├── SdFile.cpp │ │ │ ├── SdFile.h │ │ │ ├── SdInfo.h │ │ │ ├── SdVolume.cpp │ │ │ ├── SdVolume.h │ │ │ ├── cardreader.cpp │ │ │ ├── cardreader.h │ │ │ └── usb_flashdrive │ │ │ ├── Sd2Card_FlashDrive.cpp │ │ │ ├── Sd2Card_FlashDrive.h │ │ │ ├── lib-uhs2 │ │ │ ├── Usb.cpp │ │ │ ├── Usb.h │ │ │ ├── UsbCore.h │ │ │ ├── address.h │ │ │ ├── confdescparser.h │ │ │ ├── hexdump.h │ │ │ ├── macros.h │ │ │ ├── masstorage.cpp │ │ │ ├── masstorage.h │ │ │ ├── max3421e.h │ │ │ ├── message.cpp │ │ │ ├── message.h │ │ │ ├── parsetools.cpp │ │ │ ├── parsetools.h │ │ │ ├── printhex.h │ │ │ ├── settings.h │ │ │ ├── usb_ch9.h │ │ │ ├── usbhost.cpp │ │ │ └── usbhost.h │ │ │ └── lib-uhs3 │ │ │ ├── UHS_host │ │ │ ├── UHS_BULK_STORAGE │ │ │ │ ├── UHS_BULK_STORAGE.h │ │ │ │ ├── UHS_BULK_STORAGE_INLINE.h │ │ │ │ └── UHS_SCSI.h │ │ │ ├── UHS_UNOFFICIAL_IDs.h │ │ │ ├── UHS_USB_IDs.h │ │ │ ├── UHS_UsbCore.h │ │ │ ├── UHS_address.h │ │ │ ├── UHS_hexdump.h │ │ │ ├── UHS_host.h │ │ │ ├── UHS_host_INLINE.h │ │ │ ├── UHS_macros.h │ │ │ ├── UHS_message.h │ │ │ ├── UHS_printf_HELPER.h │ │ │ ├── UHS_printhex.h │ │ │ ├── UHS_settings.h │ │ │ ├── UHS_usb_ch9.h │ │ │ ├── UHS_usbhost.h │ │ │ ├── UHS_util_INLINE.h │ │ │ ├── USB_HOST_SHIELD │ │ │ │ ├── UHS_max3421e.h │ │ │ │ ├── USB_HOST_SHIELD.h │ │ │ │ └── USB_HOST_SHIELD_INLINE.h │ │ │ └── macro_logic.h │ │ │ └── dyn_SWI │ │ │ ├── SWI_INLINE.h │ │ │ └── dyn_SWI.h │ ├── README.md │ ├── buildroot │ │ ├── bin │ │ │ ├── .gitattributes │ │ │ ├── format_code │ │ │ ├── generate_version │ │ │ ├── opt_add │ │ │ ├── opt_disable │ │ │ ├── opt_enable │ │ │ ├── opt_set │ │ │ ├── pins_set │ │ │ ├── restore_configs │ │ │ ├── uncrust │ │ │ └── use_example_configs │ │ ├── etc │ │ │ ├── .astylerc │ │ │ └── udev │ │ │ │ └── rules.d │ │ │ │ └── 99-platformio-udev.rules │ │ ├── share │ │ │ ├── PlatformIO │ │ │ │ ├── boards │ │ │ │ │ ├── BigTree_Btt002.json │ │ │ │ │ ├── BigTree_GTR_v1.json │ │ │ │ │ ├── BigTree_SKR_Pro.json │ │ │ │ │ ├── CHITU_F103.json │ │ │ │ │ ├── FLYF407ZG.json │ │ │ │ │ ├── LERDGE.json │ │ │ │ │ ├── MEEB_3DP.json │ │ │ │ │ ├── STEVAL_STM32F401VE.json │ │ │ │ │ ├── archim.json │ │ │ │ │ ├── at90usb1286.json │ │ │ │ │ ├── blackSTM32F407VET6.json │ │ │ │ │ ├── fysetc_f6.json │ │ │ │ │ ├── genericSTM32F407VGT6.json │ │ │ │ │ ├── malyanM200.json │ │ │ │ │ ├── malyanM200v2.json │ │ │ │ │ └── marlin_fysetc_s6.json │ │ │ │ ├── ldscripts │ │ │ │ │ ├── STM32F103RC_MEEB_3DP.ld │ │ │ │ │ ├── STM32F103RC_SKR_MINI_256K.ld │ │ │ │ │ ├── STM32F103RC_SKR_MINI_512K.ld │ │ │ │ │ ├── STM32F103RE_SKR_E3_DIP.ld │ │ │ │ │ ├── STM32F103VE_longer.ld │ │ │ │ │ ├── chitu_f103.ld │ │ │ │ │ ├── creality.ld │ │ │ │ │ ├── fly_mini.ld │ │ │ │ │ ├── fysetc_stm32f103rc.ld │ │ │ │ │ ├── jgaurora_a5s_a1.ld │ │ │ │ │ ├── lerdge.ld │ │ │ │ │ ├── mks_robin.ld │ │ │ │ │ ├── mks_robin_e3.ld │ │ │ │ │ ├── mks_robin_e3p.ld │ │ │ │ │ ├── mks_robin_lite.ld │ │ │ │ │ ├── mks_robin_lite3.ld │ │ │ │ │ ├── mks_robin_mini.ld │ │ │ │ │ ├── mks_robin_nano.ld │ │ │ │ │ └── mks_robin_pro.ld │ │ │ │ ├── scripts │ │ │ │ │ ├── STEVAL__F401XX.py │ │ │ │ │ ├── STM32F103RC_MEEB_3DP.py │ │ │ │ │ ├── STM32F103RC_SKR_MINI.py │ │ │ │ │ ├── STM32F103RC_fysetc.py │ │ │ │ │ ├── STM32F103RE_SKR_E3_DIP.py │ │ │ │ │ ├── STM32F103VE_longer.py │ │ │ │ │ ├── STM32F1_create_variant.py │ │ │ │ │ ├── add_nanolib.py │ │ │ │ │ ├── anet_et4_openblt.py │ │ │ │ │ ├── chitu_crypt.py │ │ │ │ │ ├── common-cxxflags.py │ │ │ │ │ ├── common-dependencies-post.py │ │ │ │ │ ├── common-dependencies.h │ │ │ │ │ ├── common-dependencies.py │ │ │ │ │ ├── copy_marlin_variant_to_framework.py │ │ │ │ │ ├── creality.py │ │ │ │ │ ├── download_mks_assets.py │ │ │ │ │ ├── fly_mini.py │ │ │ │ │ ├── generic_create_variant.py │ │ │ │ │ ├── jgaurora_a5s_a1_with_bootloader.py │ │ │ │ │ ├── jgaurora_bootloader.bin │ │ │ │ │ ├── lerdge.py │ │ │ │ │ ├── mks_encrypt.py │ │ │ │ │ ├── mks_robin.py │ │ │ │ │ ├── mks_robin_e3.py │ │ │ │ │ ├── mks_robin_e3p.py │ │ │ │ │ ├── mks_robin_lite.py │ │ │ │ │ ├── mks_robin_lite3.py │ │ │ │ │ ├── mks_robin_mini.py │ │ │ │ │ ├── mks_robin_nano.py │ │ │ │ │ ├── mks_robin_nano35.py │ │ │ │ │ ├── mks_robin_pro.py │ │ │ │ │ ├── random-bin.py │ │ │ │ │ └── stm32_bootloader.py │ │ │ │ └── variants │ │ │ │ │ ├── BIGTREE_BTT002 │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_extra.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── BIGTREE_GTR_V1 │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_extra.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── BIGTREE_SKR_PRO_1v1 │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_extra.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── CHITU_F103 │ │ │ │ │ ├── board.cpp │ │ │ │ │ ├── board │ │ │ │ │ │ └── board.h │ │ │ │ │ ├── ld │ │ │ │ │ │ ├── common.inc │ │ │ │ │ │ ├── extra_libs.inc │ │ │ │ │ │ ├── stm32f103z_dfu.ld │ │ │ │ │ │ ├── stm32f103zc.ld │ │ │ │ │ │ ├── stm32f103zd.ld │ │ │ │ │ │ ├── stm32f103ze.ld │ │ │ │ │ │ └── vector_symbols.inc │ │ │ │ │ ├── pins_arduino.h │ │ │ │ │ ├── variant.h │ │ │ │ │ └── wirish │ │ │ │ │ │ ├── boards.cpp │ │ │ │ │ │ ├── boards_setup.cpp │ │ │ │ │ │ ├── start_c.c │ │ │ │ │ │ └── syscalls.c │ │ │ │ │ ├── FLY_F407ZG │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── LERDGE │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MARLIN_F103Vx │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MARLIN_F103Zx │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_custom.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MARLIN_F407VE │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_custom.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MARLIN_F4x7Vx │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_extra.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MARLIN_FYSETC_S6 │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── MEEB_3DP │ │ │ │ │ ├── board.cpp │ │ │ │ │ ├── board │ │ │ │ │ │ └── board.h │ │ │ │ │ ├── ld │ │ │ │ │ │ ├── bootloader.ld │ │ │ │ │ │ ├── common.inc │ │ │ │ │ │ ├── extra_libs.inc │ │ │ │ │ │ ├── flash.ld │ │ │ │ │ │ ├── jtag.ld │ │ │ │ │ │ ├── mem-flash.inc │ │ │ │ │ │ ├── mem-jtag.inc │ │ │ │ │ │ ├── mem-ram.inc │ │ │ │ │ │ ├── ram.ld │ │ │ │ │ │ ├── stm32f103rb.ld │ │ │ │ │ │ ├── stm32f103rb_bootloader.ld │ │ │ │ │ │ ├── stm32f103rc.ld │ │ │ │ │ │ ├── stm32f103rc_bootloader.ld │ │ │ │ │ │ ├── stm32f103re.ld │ │ │ │ │ │ └── vector_symbols.inc │ │ │ │ │ ├── pins_arduino.h │ │ │ │ │ ├── variant.h │ │ │ │ │ └── wirish │ │ │ │ │ │ ├── boards.cpp │ │ │ │ │ │ ├── boards_setup.cpp │ │ │ │ │ │ ├── start_c.c │ │ │ │ │ │ └── syscalls.c │ │ │ │ │ ├── STEVAL_F401VE │ │ │ │ │ ├── PeripheralPins.c │ │ │ │ │ ├── PinNamesVar.h │ │ │ │ │ ├── hal_conf_custom.h │ │ │ │ │ ├── ldscript.ld │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ ├── archim │ │ │ │ │ ├── .gitignore │ │ │ │ │ ├── build_gcc │ │ │ │ │ │ ├── Makefile │ │ │ │ │ │ ├── debug.mk │ │ │ │ │ │ ├── gcc.mk │ │ │ │ │ │ ├── libvariant_arduino_due_x.mk │ │ │ │ │ │ └── release.mk │ │ │ │ │ ├── debug_scripts │ │ │ │ │ │ ├── gcc │ │ │ │ │ │ │ ├── arduino_due_x_flash.gdb │ │ │ │ │ │ │ └── arduino_due_x_sram.gdb │ │ │ │ │ │ └── iar │ │ │ │ │ │ │ ├── arduino_due_flash.mac │ │ │ │ │ │ │ └── arduino_due_sram.mac │ │ │ │ │ ├── libsam_sam3x8e_gcc_rel.a │ │ │ │ │ ├── libsam_sam3x8e_gcc_rel.a.txt │ │ │ │ │ ├── linker_scripts │ │ │ │ │ │ ├── gcc │ │ │ │ │ │ │ ├── flash.ld │ │ │ │ │ │ │ └── sram.ld │ │ │ │ │ │ └── iar │ │ │ │ │ │ │ ├── flash.icf │ │ │ │ │ │ │ └── sram.icf │ │ │ │ │ ├── pins_arduino.h │ │ │ │ │ ├── variant.cpp │ │ │ │ │ └── variant.h │ │ │ │ │ └── megaextendedpins │ │ │ │ │ └── pins_arduino.h │ │ │ ├── extras │ │ │ │ ├── header.h │ │ │ │ └── uncrustify.cfg │ │ │ ├── fonts │ │ │ │ ├── NanumGothic.bdf │ │ │ │ ├── README.md │ │ │ │ ├── genallfont.sh │ │ │ │ ├── genpages.c │ │ │ │ ├── get-bdf2u8g.sh │ │ │ │ ├── getline.c │ │ │ │ ├── getline.h │ │ │ │ ├── marlin-6x12-1.bdf │ │ │ │ ├── marlin-6x12-2.bdf │ │ │ │ ├── marlin-6x12-3.bdf │ │ │ │ ├── marlin-6x9.bdf │ │ │ │ ├── u8glib-bdf2u8g.patch │ │ │ │ ├── uxggenpages.md │ │ │ │ └── uxggenpages.sh │ │ │ ├── git │ │ │ │ ├── README.md │ │ │ │ ├── firstpush │ │ │ │ ├── ghpc │ │ │ │ ├── ghtp │ │ │ │ ├── mfadd │ │ │ │ ├── mfclean │ │ │ │ ├── mfconfig │ │ │ │ ├── mfdoc │ │ │ │ ├── mffp │ │ │ │ ├── mfhelp │ │ │ │ ├── mfinfo │ │ │ │ ├── mfinit │ │ │ │ ├── mfnew │ │ │ │ ├── mfpr │ │ │ │ ├── mfpub │ │ │ │ ├── mfqp │ │ │ │ ├── mfrb │ │ │ │ ├── mftest │ │ │ │ └── mfup │ │ │ ├── pin_interrupt_test │ │ │ │ └── pin_interrupt_test.ino │ │ │ ├── pixmaps │ │ │ │ ├── MarlinIcons.psd │ │ │ │ └── logo │ │ │ │ │ ├── marlin-1080.png │ │ │ │ │ ├── marlin-250.png │ │ │ │ │ ├── marlin-old-250.png │ │ │ │ │ ├── marlin-old-627.png │ │ │ │ │ ├── marlin-old.svg │ │ │ │ │ └── marlin.svg │ │ │ ├── scripts │ │ │ │ ├── MarlinMesh.scad │ │ │ │ ├── config-labels.py │ │ │ │ ├── createSpeedLookupTable.py │ │ │ │ ├── createTemperatureLookupMarlin.py │ │ │ │ ├── findMissingTranslations.sh │ │ │ │ ├── g29_auto.py │ │ │ │ └── pinsformat.js │ │ │ ├── sublime │ │ │ │ ├── MarlinFirmware.sublime-project │ │ │ │ ├── RepRapTools │ │ │ │ │ ├── G-Code.sublime-syntax │ │ │ │ │ └── syntax_test_G-code.gcode │ │ │ │ └── auto_build_sublime_menu │ │ │ │ │ ├── 000_read_me.txt │ │ │ │ │ └── Main.sublime-menu │ │ │ └── vscode │ │ │ │ ├── auto_build.py │ │ │ │ ├── avrdude.conf │ │ │ │ ├── avrdude_5.10_linux │ │ │ │ ├── avrdude_5.10_macOS │ │ │ │ ├── avrdude_linux.conf │ │ │ │ ├── avrdude_macOS.conf │ │ │ │ ├── create_custom_upload_command_CDC.py │ │ │ │ └── create_custom_upload_command_DFU.py │ │ ├── test-gcode │ │ │ └── M808-loops.gcode │ │ └── tests │ │ │ ├── .gitattributes │ │ │ ├── ARMED-tests │ │ │ ├── BIGTREE_BTT002-tests │ │ │ ├── BIGTREE_GTR_V1_0-tests │ │ │ ├── BIGTREE_SKR_PRO-tests │ │ │ ├── DUE-tests │ │ │ ├── DUE_archim-tests │ │ │ ├── FLYF407ZG-tests │ │ │ ├── FYSETC_F6-tests │ │ │ ├── FYSETC_S6-tests │ │ │ ├── LERDGEX-tests │ │ │ ├── LPC1768-tests │ │ │ ├── LPC1769-tests │ │ │ ├── NUCLEO_F767ZI-tests │ │ │ ├── REMRAM_V1-tests │ │ │ ├── SAMD51_grandcentral_m4-tests │ │ │ ├── STM32F070CB_malyan-tests │ │ │ ├── STM32F070RB_malyan-tests │ │ │ ├── STM32F103CB_malyan-tests │ │ │ ├── STM32F103RC_btt-tests │ │ │ ├── STM32F103RC_btt_USB-tests │ │ │ ├── STM32F103RC_fysetc-tests │ │ │ ├── STM32F103RC_meeb-tests │ │ │ ├── STM32F103RE-tests │ │ │ ├── STM32F103RET6_creality-tests │ │ │ ├── STM32F103RE_btt-tests │ │ │ ├── STM32F103RE_btt_USB-tests │ │ │ ├── STM32F103VE_longer-tests │ │ │ ├── STM32F401VE_STEVAL-tests │ │ │ ├── STM32F407VE_black-tests │ │ │ ├── at90usb1286_cdc-tests │ │ │ ├── at90usb1286_dfu-tests │ │ │ ├── esp32-tests │ │ │ ├── jgaurora_a5s_a1-tests │ │ │ ├── linux_native-tests │ │ │ ├── malyan_M300-tests │ │ │ ├── mega1280-tests │ │ │ ├── mega2560-tests │ │ │ ├── mks_robin-tests │ │ │ ├── mks_robin_lite-tests │ │ │ ├── mks_robin_mini-tests │ │ │ ├── mks_robin_nano35-tests │ │ │ ├── mks_robin_nano35_stm32-tests │ │ │ ├── mks_robin_pro-tests │ │ │ ├── mks_robin_stm32-tests │ │ │ ├── rambo-tests │ │ │ ├── rumba32-tests │ │ │ ├── run_tests │ │ │ ├── sanguino1284p-tests │ │ │ ├── sanguino644p-tests │ │ │ ├── teensy31-tests │ │ │ ├── teensy35-tests │ │ │ └── teensy41-tests │ ├── config │ │ └── README.md │ ├── data │ │ └── www │ │ │ ├── bootstrap.min.css │ │ │ ├── bootstrap.min.js │ │ │ ├── bootstrap4-toggle.min.js │ │ │ ├── chart.lineargauge.js │ │ │ ├── chart.min.js │ │ │ ├── filesaver.min.js │ │ │ ├── index-ie.html │ │ │ ├── index.html │ │ │ ├── jquery-3.5.1.slim.min.js │ │ │ ├── jquery.browser.min.js │ │ │ ├── marlin-logo-dark.png │ │ │ ├── marlinui.eot │ │ │ ├── marlinui.svg │ │ │ ├── marlinui.ttf │ │ │ ├── marlinui.woff │ │ │ ├── moment.min.js │ │ │ ├── webmarlin-class.js │ │ │ ├── webmarlin-font.css │ │ │ ├── webmarlin.css │ │ │ └── webmarlin.js │ ├── docker-compose.yml │ ├── docker │ │ └── Dockerfile │ ├── docs │ │ └── Bresenham.md │ ├── get_test_targets.py │ ├── platformio.ini │ └── process-palette.json └── firmware-20210202-235907.bin ├── Pre-Production - Beta tester printers ├── README.md └── V4.2.5 Boards Only │ ├── README.md │ └── firmware-20210120-185535.bin └── README.md /Factory Original Firmware/3DPrintMill-firmware-20210114-182039.bin: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/Factory Original Firmware/3DPrintMill-firmware-20210114-182039.bin -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.editorconfig: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.editorconfig -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.gitattributes: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.gitattributes -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/FUNDING.yml: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/FUNDING.yml -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/code_of_conduct.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/code_of_conduct.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/contributing.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/contributing.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/issue_template.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/issue_template.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/lock.yml: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/lock.yml -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/pull_request_template.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/pull_request_template.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.github/workflows/test-builds.yml: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.github/workflows/test-builds.yml -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/.gitignore: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/.gitignore -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/LICENSE: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/LICENSE -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Makefile: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Makefile -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Configuration.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Configuration.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Configuration_adv.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Configuration_adv.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Makefile: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Makefile -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Marlin.ino: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Marlin.ino -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Version.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/Version.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/_Bootscreen.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/_Bootscreen.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/_Statusscreen.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/_Statusscreen.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/MarlinSerial.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/MarlinSerial.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/MarlinSerial.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/MarlinSerial.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/ServoTimers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/ServoTimers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/eeprom.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/eeprom.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fast_pwm.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fast_pwm.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fastio.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fastio.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/math.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/math.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/AVR/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/MarlinSerial.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/MarlinSerial.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/ServoTimers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/ServoTimers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/Tone.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/Tone.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/fastio/G2_PWM.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/fastio/G2_PWM.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/compiler.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/compiler.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/conf_usb.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/conf_usb.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/genclk.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/genclk.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/mrepeat.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/mrepeat.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/osc.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/osc.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/pll.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/pll.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/stringz.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/stringz.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/sysclk.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/sysclk.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/sysclk.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/sysclk.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/tpaste.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/tpaste.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc_desc.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udc_desc.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udd.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udd.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_cdc.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_cdc.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_cdc.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_cdc.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_msc.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_msc.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_msc.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/udi_msc.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/usb_task.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/usb_task.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/usb_task.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/usb/usb_task.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/DUE/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/eeprom.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/eeprom.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/i2s.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/i2s.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/i2s.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/i2s.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/ota.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/ota.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/ota.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/ota.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/servotimers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/servotimers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spiffs.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spiffs.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spiffs.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/spiffs.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/web.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/web.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/web.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/web.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/wifi.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/wifi.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/wifi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/ESP32/wifi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/arduino.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/arduino.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/eeprom.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/eeprom.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/main.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/main.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LINUX/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/MarlinSPI.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/MarlinSPI.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/main.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/main.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/LPC1768/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/QSPIFlash.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/QSPIFlash.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/SAMD51.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/SAMD51.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/SAMD51/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/MarlinSPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/MarlinSPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/MarlinSPI.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/MarlinSPI.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fast_pwm.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fast_pwm.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fastio.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fastio.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/pins_Xref.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/pins_Xref.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/tft/tft_spi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/tft/tft_spi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/tft/xpt2046.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/tft/xpt2046.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_host.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_host.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_host.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_host.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_serial.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/usb_serial.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/watchdog.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/watchdog.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL_SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/HAL_SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/MarlinSPI.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/MarlinSPI.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/SPI.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/SPI.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/SPI.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/SPI.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/Servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/Servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/fastio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/fastio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/msc_sd.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/msc_sd.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/msc_sd.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/msc_sd.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/sdio.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/sdio.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/sdio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/sdio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/spi_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/spi_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/timers.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/timers.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/timers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/timers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/watchdog.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/STM32F1/watchdog.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY31_32/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY35_36/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/HAL.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/HAL.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/HAL.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/HAL.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/Servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/TEENSY40_41/Servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/platforms.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/platforms.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/Delay.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/Delay.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/HAL_SPI.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/HAL_SPI.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/HAL_ST7920.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/HAL_ST7920.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/Marduino.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/Marduino.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/eeprom_api.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/eeprom_api.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/eeprom_if.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/eeprom_if.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/esp_wifi.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/esp_wifi.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/esp_wifi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/esp_wifi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/math_32bit.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/math_32bit.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/HAL/shared/servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/MarlinCore.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/MarlinCore.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/MarlinCore.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/MarlinCore.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/boards.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/boards.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/debug_out.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/debug_out.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/debug_section.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/debug_section.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/drivers.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/drivers.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/language.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/language.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/macros.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/macros.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/millis_t.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/millis_t.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/multi_language.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/multi_language.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/serial.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/serial.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/serial.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/serial.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/types.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/types.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/utility.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/utility.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/utility.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/core/utility.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/babystep.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/babystep.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/babystep.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/babystep.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/backlash.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/backlash.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/backlash.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/backlash.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/baricuda.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/baricuda.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/baricuda.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/baricuda.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/binary_stream.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/binary_stream.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/bltouch.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/bltouch.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/bltouch.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/bltouch.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/cancel_object.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/cancel_object.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/caselight.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/caselight.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/caselight.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/caselight.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/closedloop.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/closedloop.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/closedloop.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/closedloop.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/controllerfan.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/controllerfan.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/e_parser.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/e_parser.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/e_parser.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/e_parser.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/encoder_i2c.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/encoder_i2c.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/encoder_i2c.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/encoder_i2c.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/ethernet.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/ethernet.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/ethernet.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/ethernet.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fanmux.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fanmux.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fanmux.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fanmux.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/filwidth.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/filwidth.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/filwidth.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/filwidth.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fwretract.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fwretract.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fwretract.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/fwretract.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/host_actions.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/host_actions.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/hotend_idle.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/hotend_idle.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/hotend_idle.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/hotend_idle.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/joystick.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/joystick.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/joystick.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/joystick.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/blinkm.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/blinkm.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/blinkm.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/blinkm.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/leds.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/leds.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/leds.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/leds.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/neopixel.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/neopixel.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/pca9533.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/pca9533.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/pca9632.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/pca9632.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/tempstat.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/leds/tempstat.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/max7219.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/max7219.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/max7219.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/max7219.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mixing.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mixing.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mixing.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mixing.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu2.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu2.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu2.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/mmu/mmu2.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/pause.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/pause.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/pause.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/pause.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power_monitor.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/power_monitor.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/powerloss.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/powerloss.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/powerloss.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/powerloss.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/repeat.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/repeat.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/repeat.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/repeat.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/runout.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/runout.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/runout.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/runout.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/solenoid.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/solenoid.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/solenoid.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/solenoid.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/spindle_laser.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/spindle_laser.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tmc_util.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tmc_util.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tmc_util.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tmc_util.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tramming.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/tramming.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/twibus.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/twibus.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/twibus.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/feature/twibus.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G26.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G26.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G35.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G35.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G42.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/G42.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/M420.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/bedlevel/M420.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G28.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G28.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G33.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G33.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G34.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/G34.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/M12.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/M12.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/M48.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/calibrate/M48.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M217.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M217.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M218.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M218.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M220.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M220.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M221.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M221.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M281.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M281.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M301.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M301.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M302.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M302.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M304.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M304.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M305.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M305.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M43.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M43.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M540.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M540.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M575.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M575.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M672.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M672.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M92.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/config/M92.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M111.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M111.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M211.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M211.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M226.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M226.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M280.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M280.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M3-M5.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M3-M5.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M400.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M400.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M42.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M42.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M605.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M605.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M7-M9.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M7-M9.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M85.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M85.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M997.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M997.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M999.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/M999.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/T.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/control/T.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode_d.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/gcode_d.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/geometry/G92.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/geometry/G92.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M110.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M110.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M113.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M113.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M114.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M114.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M115.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M115.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M118.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M118.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M119.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M119.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M16.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M16.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M360.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M360.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M876.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/host/M876.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M0_M1.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M0_M1.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M117.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M117.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M145.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M145.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M250.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M250.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M300.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M300.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M73.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M73.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M995.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/lcd/M995.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G0_G1.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G0_G1.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G2_G3.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G2_G3.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G4.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G4.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G5.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G5.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G6.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G6.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G80.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/G80.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/M290.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/motion/M290.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/parser.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/parser.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/parser.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/parser.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G30.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G30.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G31_G32.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G31_G32.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G38.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/G38.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/M851.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/M851.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/M951.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/probe/M951.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/queue.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/queue.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/queue.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/queue.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M1001.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M1001.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M20.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M20.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M21_M22.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M21_M22.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M23.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M23.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M24_M25.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M24_M25.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M26.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M26.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M27.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M27.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M28_M29.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M28_M29.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M30.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M30.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M32.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M32.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M33.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M33.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M34.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M34.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M524.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M524.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M808.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M808.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M928.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/sd/M928.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/stats/M31.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/stats/M31.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/stats/M75-M78.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/stats/M75-M78.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M105.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M105.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M155.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M155.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M303.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/temp/M303.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/G20_G21.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/G20_G21.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/M149.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/M149.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/M82_M83.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/gcode/units/M82_M83.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_LCD.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_LCD.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_adv.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_adv.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_post.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Conditionals_post.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/MarlinConfig.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/MarlinConfig.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/MarlinConfigPre.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/MarlinConfigPre.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/SanityCheck.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/SanityCheck.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Version.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/inc/Version.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/status/bed.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/status/bed.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/status/fan.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/status/fan.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/u8g_fontutf8.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dogm/u8g_fontutf8.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/dwin_lcd.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/dwin_lcd.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/dwin_lcd.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/dwin_lcd.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/dwin.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/dwin.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/dwin.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/dwin/e3v2/dwin.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/dgus_lcd.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/dgus_lcd.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/example.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/example.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/ui_api.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/ui_api.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/ui_api.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/extui/ui_api.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/fontutils.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/fontutils.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/fontutils.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/fontutils.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/lcdprint.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/lcdprint.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/lcdprint.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/lcdprint.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/marlinui.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/marlinui.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/marlinui.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/marlinui.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/game.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/game.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/game.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/game.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/maze.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/maze.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/maze.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/maze.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/snake.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/snake.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/snake.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/snake.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/types.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/game/types.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_addon.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_addon.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_game.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_game.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_info.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_info.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_item.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_item.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_led.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_led.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_main.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_main.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_media.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_media.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mixer.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mixer.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mmu2.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mmu2.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mmu2.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_mmu2.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_tmc.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_tmc.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_tune.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_tune.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_ubl.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/menu/menu_ubl.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/scaled_tft.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/scaled_tft.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/bed.bmp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/bed.bmp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/sd.bmp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/sd.bmp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/up.bmp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/bitmaps/up.bmp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/canvas.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/canvas.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/canvas.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/canvas.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_color.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_color.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_image.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_image.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_image.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_image.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_queue.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_queue.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_queue.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_queue.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_string.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_string.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_string.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/tft_string.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/touch.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/touch.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/touch.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/touch.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_320x240.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_320x240.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_320x240.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_320x240.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_480x320.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_480x320.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_480x320.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft/ui_480x320.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9328.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9328.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9341.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9341.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9488.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ili9488.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/r65105.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/r65105.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ssd1963.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/ssd1963.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7735.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7735.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7789v.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7789v.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7796s.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/st7796s.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/tft_io.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/tft_io.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/tft_io.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/tft_io/tft_io.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/thermistornames.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/lcd/thermistornames.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/BL24CXX.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/BL24CXX.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/BL24CXX.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/BL24CXX.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/L64XX/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/L64XX/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/W25Qxx.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/W25Qxx.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/W25Qxx.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/W25Qxx.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/bresenham.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/bresenham.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/buzzer.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/buzzer.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/buzzer.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/buzzer.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/circularqueue.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/circularqueue.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/crc16.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/crc16.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/crc16.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/crc16.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/duration_t.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/duration_t.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/heatshrink/LICENSE: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/heatshrink/LICENSE -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/hex_print.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/hex_print.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/hex_print.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/hex_print.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/nozzle.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/nozzle.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/nozzle.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/nozzle.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/numtostr.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/numtostr.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/numtostr.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/numtostr.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/private_spi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/private_spi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/softspi.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/softspi.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/stopwatch.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/stopwatch.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/stopwatch.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/stopwatch.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/vector_3.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/vector_3.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/vector_3.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/libs/vector_3.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/delta.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/delta.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/delta.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/delta.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/endstops.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/endstops.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/endstops.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/endstops.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/motion.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/motion.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/motion.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/motion.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner_bezier.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/planner_bezier.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/printcounter.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/printcounter.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/printcounter.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/printcounter.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/probe.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/probe.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/probe.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/probe.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/scara.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/scara.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/scara.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/scara.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/servo.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/servo.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/servo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/servo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/settings.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/settings.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/settings.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/settings.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper/L64xx.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper/L64xx.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper/TMC26X.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/stepper/TMC26X.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/temperature.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/temperature.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/temperature.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/temperature.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/tool_change.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/tool_change.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/tool_change.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/module/tool_change.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/esp32/pins_E4D.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/esp32/pins_E4D.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/esp32/pins_ESP32.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/esp32/pins_ESP32.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/mega/pins_PICA.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/mega/pins_PICA.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pinsDebug.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pinsDebug.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pinsDebug_list.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pinsDebug_list.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pins_postprocess.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/pins_postprocess.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/rambo/pins_RAMBO.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/rambo/pins_RAMBO.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_3DRAG.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_3DRAG.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8200.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8200.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8400.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8400.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8600.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8600.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8800.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_K8800.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RAMPS.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RAMPS.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RL200.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RL200.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RUMBA.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_RUMBA.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_TANGO.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_TANGO.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_VORON.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/ramps/pins_VORON.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ADSK.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ADSK.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ARCHIM1.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ARCHIM1.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ARCHIM2.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_ARCHIM2.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_DUE3DOM.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_DUE3DOM.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_RADDS.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sam/pins_RADDS.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sensitive_pins.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/pins/sensitive_pins.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card_sdio.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/Sd2Card_sdio.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdBaseFile.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdBaseFile.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdBaseFile.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdBaseFile.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatConfig.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatConfig.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatStructs.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatStructs.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatUtil.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatUtil.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatUtil.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFatUtil.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFile.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFile.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFile.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdFile.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdInfo.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdInfo.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdVolume.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdVolume.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdVolume.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/SdVolume.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/cardreader.cpp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/cardreader.cpp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/cardreader.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/Marlin/src/sd/cardreader.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/.gitattributes: -------------------------------------------------------------------------------- 1 | * text=auto eol=lf 2 | -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/format_code: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/format_code -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/generate_version: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/generate_version -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_add: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_add -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_disable: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_disable -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_enable: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_enable -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_set: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/opt_set -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/pins_set: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/pins_set -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/restore_configs: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/restore_configs -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/uncrust: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/uncrust -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/use_example_configs: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/bin/use_example_configs -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/etc/.astylerc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/etc/.astylerc -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/PlatformIO/variants/CHITU_F103/pins_arduino.h: -------------------------------------------------------------------------------- 1 | // API compatibility 2 | #include "variant.h" 3 | -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/PlatformIO/variants/MEEB_3DP/pins_arduino.h: -------------------------------------------------------------------------------- 1 | // API compatibility 2 | #include "variant.h" 3 | -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/extras/header.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/extras/header.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/genpages.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/genpages.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/getline.c: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/getline.c -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/getline.h: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/fonts/getline.h -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/firstpush: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/firstpush -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/ghpc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/ghpc -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/ghtp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/ghtp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfadd: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfadd -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfclean: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfclean -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfconfig: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfconfig -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfdoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfdoc -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mffp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mffp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfhelp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfhelp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfinfo: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfinfo -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfinit: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfinit -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfnew: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfnew -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfpr: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfpr -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfpub: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfpub -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfqp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfqp -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfrb: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfrb -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mftest: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mftest -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfup: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/share/git/mfup -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/.gitattributes: -------------------------------------------------------------------------------- 1 | * text=auto eol=lf 2 | -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/ARMED-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/ARMED-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/DUE-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/DUE-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/DUE_archim-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/DUE_archim-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FLYF407ZG-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FLYF407ZG-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FYSETC_F6-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FYSETC_F6-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FYSETC_S6-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/FYSETC_S6-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LERDGEX-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LERDGEX-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LPC1768-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LPC1768-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LPC1769-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/LPC1769-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/REMRAM_V1-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/REMRAM_V1-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/STM32F103RE-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/STM32F103RE-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/esp32-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/esp32-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/linux_native-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/linux_native-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/malyan_M300-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/malyan_M300-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mega1280-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mega1280-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mega2560-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mega2560-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mks_robin-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/mks_robin-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/rambo-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/rambo-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/rumba32-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/rumba32-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/run_tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/run_tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/sanguino644p-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/sanguino644p-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy31-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy31-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy35-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy35-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy41-tests: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/buildroot/tests/teensy41-tests -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/config/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/config/README.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap.min.css: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap.min.css -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap4-toggle.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/bootstrap4-toggle.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/chart.lineargauge.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/chart.lineargauge.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/chart.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/chart.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/filesaver.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/filesaver.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/index-ie.html: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/index-ie.html -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/index.html: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/index.html -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/jquery-3.5.1.slim.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/jquery-3.5.1.slim.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/jquery.browser.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/jquery.browser.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlin-logo-dark.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlin-logo-dark.png -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.eot: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.eot -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.svg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.svg -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.ttf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.ttf -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.woff: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/marlinui.woff -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/moment.min.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/moment.min.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin-class.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin-class.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin-font.css: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin-font.css -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin.css: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin.css -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin.js: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/data/www/webmarlin.js -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/docker-compose.yml: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/docker-compose.yml -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/docker/Dockerfile: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/docker/Dockerfile -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/docs/Bresenham.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/docs/Bresenham.md -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/get_test_targets.py: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/get_test_targets.py -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/platformio.ini: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/platformio.ini -------------------------------------------------------------------------------- /New Firmware/Marlin-creality_CR30_printmill_208/process-palette.json: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/Marlin-creality_CR30_printmill_208/process-palette.json -------------------------------------------------------------------------------- /New Firmware/firmware-20210202-235907.bin: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/New Firmware/firmware-20210202-235907.bin -------------------------------------------------------------------------------- /Pre-Production - Beta tester printers/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/Pre-Production - Beta tester printers/README.md -------------------------------------------------------------------------------- /Pre-Production - Beta tester printers/V4.2.5 Boards Only/README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/Pre-Production - Beta tester printers/V4.2.5 Boards Only/README.md -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NAK3DDesigns/CR-30-Firmware/HEAD/README.md --------------------------------------------------------------------------------