├── README.md ├── profiles ├── Elegoo.idx ├── Elegoo │ ├── neptune_bed.stl │ ├── NEPTUNE1_thumbnail.png │ ├── NEPTUNE2D_thumbnail.png │ ├── NEPTUNE2S_thumbnail.png │ ├── NEPTUNE2_thumbnail.png │ ├── NEPTUNE3_thumbnail.png │ ├── NEPTUNEX_thumbnail.png │ ├── NEPTUNE3MAX_thumbnail.png │ ├── NEPTUNE3PRO_thumbnail.png │ └── NEPTUNE3PLUS_thumbnail.png └── Elegoo.ini └── .gitattributes /README.md: -------------------------------------------------------------------------------- 1 | # PrusaSlicer-Neptune 2 | Neptune系列配置文件 3 | -------------------------------------------------------------------------------- /profiles/Elegoo.idx: -------------------------------------------------------------------------------- 1 | -------------------------------------------------------------------------------- /.gitattributes: -------------------------------------------------------------------------------- 1 | # Auto detect text files and perform LF normalization 2 | * text=auto 3 | -------------------------------------------------------------------------------- /profiles/Elegoo/neptune_bed.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/neptune_bed.stl -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE1_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE1_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE2D_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE2D_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE2S_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE2S_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE2_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE2_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE3_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE3_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNEX_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNEX_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE3MAX_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE3MAX_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE3PRO_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE3PRO_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo/NEPTUNE3PLUS_thumbnail.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/NARUTOfzr/PrusaSlicer-Neptune/HEAD/profiles/Elegoo/NEPTUNE3PLUS_thumbnail.png -------------------------------------------------------------------------------- /profiles/Elegoo.ini: -------------------------------------------------------------------------------- 1 | # PrusaSlicer print profiles for the Elegoo printers. 2 | # By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini 3 | 4 | [vendor] 5 | # Vendor name will be shown by the Config Wizard. 6 | name = Elegoo 7 | # Configuration version of this file. Config file will only be installed, if the config_version differs. 8 | # This means, the server may force the PrusaSlicer configuration to be downgraded. 9 | config_version = 1.0.0 10 | config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Elegoo/ 11 | 12 | # The printer models will be shown by the Configuration Wizard in this order, 13 | # also the first model installed & the first nozzle installed will be activated after install. 14 | # Printer model name will be shown by the installation wizard. 15 | 16 | [printer_model:NEPTUNE1] 17 | name = Elegoo Neptune-1 18 | variants = 0.4 19 | technology = FFF 20 | family = NEPTUNE 21 | bed_model = neptune_bed.stl 22 | bed_texture = 23 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 24 | 25 | [printer_model:NEPTUNE2] 26 | name = Elegoo Neptune-2 27 | variants = 0.4 28 | technology = FFF 29 | family = NEPTUNE 30 | bed_model = neptune_bed.stl 31 | bed_texture = 32 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 33 | 34 | [printer_model:NEPTUNE2D] 35 | name = Elegoo Neptune-2D 36 | variants = 0.4 37 | technology = FFF 38 | family = NEPTUNE 39 | bed_model = neptune_bed.stl 40 | bed_texture = 41 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 42 | 43 | [printer_model:NEPTUNE2S] 44 | name = Elegoo Neptune-2S 45 | variants = 0.4 46 | technology = FFF 47 | family = NEPTUNE 48 | bed_model = neptune_bed.stl 49 | bed_texture = 50 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 51 | 52 | [printer_model:NEPTUNE3] 53 | name = Elegoo Neptune-3 54 | variants = 0.4 55 | technology = FFF 56 | family = NEPTUNE 57 | bed_model = neptune_bed.stl 58 | bed_texture = 59 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 60 | 61 | [printer_model:NEPTUNEX] 62 | name = Elegoo Neptune-X 63 | variants = 0.4 64 | technology = FFF 65 | family = NEPTUNE 66 | bed_model = neptune_bed.stl 67 | bed_texture = 68 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO 69 | 70 | [printer_model:NEPTUNE3PRO] 71 | name = Elegoo Neptune-3 Pro 72 | variants = 0.4 73 | technology = FFF 74 | family = NEPTUNE 75 | bed_model = neptune_bed.stl 76 | bed_texture = 77 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO; Generic PLA-K0.1 @ELEGOO; Generic PETG-K0.11 @ELEGOO; Generic ABS-0.08 @ELEGOO 78 | 79 | [printer_model:NEPTUNE3PLUS] 80 | name = Elegoo Neptune-3 Plus 81 | variants = 0.4 82 | technology = FFF 83 | family = NEPTUNE 84 | bed_model = neptune_bed.stl 85 | bed_texture = 86 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO; Generic PLA-K0.1 @ELEGOO; Generic PETG-K0.11 @ELEGOO; Generic ABS-0.08 @ELEGOO 87 | 88 | [printer_model:NEPTUNE3MAX] 89 | name = Elegoo Neptune-3 Max 90 | variants = 0.4 91 | technology = FFF 92 | family = NEPTUNE 93 | bed_model = neptune_bed.stl 94 | bed_texture = 95 | default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO; Generic PLA-K0.1 @ELEGOO; Generic PETG-K0.11 @ELEGOO; Generic ABS-0.08 @ELEGOO 96 | 97 | # All presets starting with asterisk, for example *common*, are intermediate and they will 98 | # not make it into the user interface. 99 | 100 | # Common print preset 101 | [print:*common*] 102 | avoid_crossing_perimeters = 0 103 | bridge_angle = 0 104 | bridge_flow_ratio = 0.95 105 | bridge_speed = 25 106 | brim_width = 0 107 | clip_multipart_objects = 1 108 | compatible_printers = 109 | complete_objects = 0 110 | dont_support_bridges = 1 111 | elefant_foot_compensation = 0.1 112 | ensure_vertical_shell_thickness = 1 113 | external_fill_pattern = rectilinear 114 | external_perimeters_first = 0 115 | external_perimeter_extrusion_width = 0.45 116 | external_perimeter_speed = 25 117 | extra_perimeters = 0 118 | extruder_clearance_height = 25 119 | extruder_clearance_radius = 45 120 | extrusion_width = 0.45 121 | fill_angle = 45 122 | fill_density = 20% 123 | fill_pattern = grid 124 | first_layer_extrusion_width = 0.42 125 | first_layer_height = 0.2 126 | first_layer_speed = 20 127 | gap_fill_speed = 30 128 | gcode_comments = 0 129 | infill_every_layers = 1 130 | infill_extruder = 1 131 | infill_extrusion_width = 0.45 132 | infill_first = 0 133 | infill_only_where_needed = 0 134 | infill_overlap = 25% 135 | infill_speed = 50 136 | interface_shells = 0 137 | max_print_speed = 100 138 | max_volumetric_extrusion_rate_slope_negative = 0 139 | max_volumetric_extrusion_rate_slope_positive = 0 140 | max_volumetric_speed = 0 141 | min_skirt_length = 4 142 | notes = 143 | overhangs = 0 144 | only_retract_when_crossing_perimeters = 0 145 | ooze_prevention = 0 146 | output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode 147 | perimeters = 2 148 | perimeter_extruder = 1 149 | perimeter_extrusion_width = 0.45 150 | perimeter_speed = 40 151 | post_process = 152 | print_settings_id = 153 | raft_layers = 0 154 | resolution = 0 155 | seam_position = nearest 156 | single_extruder_multi_material_priming = 0 157 | skirts = 1 158 | skirt_distance = 2 159 | skirt_height = 2 160 | small_perimeter_speed = 25 161 | solid_infill_below_area = 0 162 | solid_infill_every_layers = 0 163 | solid_infill_extruder = 1 164 | solid_infill_extrusion_width = 0.45 165 | solid_infill_speed = 40 166 | spiral_vase = 0 167 | standby_temperature_delta = -5 168 | support_material = 0 169 | support_material_extruder = 0 170 | support_material_extrusion_width = 0.38 171 | support_material_interface_extruder = 0 172 | support_material_angle = 0 173 | support_material_buildplate_only = 0 174 | support_material_enforce_layers = 0 175 | support_material_contact_distance = 0.15 176 | support_material_interface_contact_loops = 0 177 | support_material_interface_layers = 2 178 | support_material_interface_spacing = 0.2 179 | support_material_interface_speed = 100% 180 | support_material_pattern = rectilinear 181 | support_material_spacing = 2 182 | support_material_speed = 40 183 | support_material_synchronize_layers = 0 184 | support_material_threshold = 45 185 | support_material_with_sheath = 0 186 | support_material_xy_spacing = 60% 187 | thin_walls = 0 188 | top_infill_extrusion_width = 0.4 189 | top_solid_infill_speed = 30 190 | travel_speed = 150 191 | wipe_tower = 0 192 | wipe_tower_bridging = 10 193 | wipe_tower_rotation_angle = 0 194 | wipe_tower_width = 60 195 | wipe_tower_x = 170 196 | wipe_tower_y = 140 197 | xy_size_compensation = 0 198 | 199 | [print:*0.08mm*] 200 | inherits = *common* 201 | layer_height = 0.08 202 | perimeters = 3 203 | bottom_solid_layers = 9 204 | top_solid_layers = 11 205 | 206 | [print:*0.10mm*] 207 | inherits = *common* 208 | layer_height = 0.1 209 | perimeters = 3 210 | bottom_solid_layers = 7 211 | top_solid_layers = 9 212 | 213 | [print:*0.12mm*] 214 | inherits = *common* 215 | layer_height = 0.12 216 | perimeters = 3 217 | bottom_solid_layers = 6 218 | top_solid_layers = 7 219 | 220 | [print:*0.16mm*] 221 | inherits = *common* 222 | layer_height = 0.16 223 | bottom_solid_layers = 5 224 | top_solid_layers = 7 225 | 226 | [print:*0.20mm*] 227 | inherits = *common* 228 | layer_height = 0.20 229 | bottom_solid_layers = 4 230 | top_solid_layers = 5 231 | 232 | [print:*0.24mm*] 233 | inherits = *common* 234 | layer_height = 0.24 235 | top_infill_extrusion_width = 0.45 236 | bottom_solid_layers = 3 237 | top_solid_layers = 4 238 | 239 | [print:*0.28mm*] 240 | inherits = *common* 241 | layer_height = 0.28 242 | top_infill_extrusion_width = 0.45 243 | bottom_solid_layers = 3 244 | top_solid_layers = 4 245 | 246 | [print:0.08mm SUPERDETAIL @ELEGOO] 247 | inherits = *0.08mm* 248 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 249 | 250 | [print:0.10mm HIGHDETAIL @ELEGOO] 251 | inherits = *0.10mm* 252 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 253 | 254 | [print:0.12mm DETAIL @ELEGOO] 255 | inherits = *0.12mm* 256 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 257 | 258 | [print:0.16mm OPTIMAL @ELEGOO] 259 | inherits = *0.16mm* 260 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 261 | 262 | [print:0.20mm NORMAL @ELEGOO] 263 | inherits = *0.20mm* 264 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 265 | 266 | [print:0.24mm DRAFT @ELEGOO] 267 | inherits = *0.24mm* 268 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 269 | 270 | [print:0.28mm SUPERDRAFT @ELEGOO] 271 | inherits = *0.28mm* 272 | compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4 273 | 274 | # When submitting new filaments please print the following temperature tower at 0.1mm layer height: 275 | # https://www.thingiverse.com/thing:2615842 276 | # Pay particular attention to bridging, overhangs and retractions. 277 | # Also print the following bed adhesion test at 0.1 layer height as well: 278 | # https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test 279 | # At least for PLA, please keep bed temp at 60, as many Elegoo printers do not have any ABL 280 | # So having some leeway to get good bed adhesion is not a luxury for many users 281 | 282 | [filament:*common*] 283 | cooling = 0 284 | compatible_printers = 285 | extrusion_multiplier = 1 286 | filament_cost = 0 287 | filament_density = 0 288 | filament_diameter = 1.75 289 | filament_notes = "" 290 | filament_settings_id = "" 291 | filament_soluble = 0 292 | min_print_speed = 15 293 | slowdown_below_layer_time = 20 294 | compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ELEGOO.*/ 295 | 296 | 297 | 298 | 299 | 300 | [filament:*PLA*] 301 | inherits = *common* 302 | bed_temperature = 60 303 | fan_below_layer_time = 100 304 | filament_colour = #FF8000 305 | filament_max_volumetric_speed = 15 306 | filament_type = PLA 307 | filament_density = 1.24 308 | filament_cost = 20 309 | first_layer_bed_temperature = 60 310 | first_layer_temperature = 210 311 | fan_always_on = 1 312 | cooling = 1 313 | max_fan_speed = 100 314 | min_fan_speed = 100 315 | bridge_fan_speed = 100 316 | disable_fan_first_layers = 1 317 | temperature = 205 318 | 319 | [filament:*PET*] 320 | inherits = *common* 321 | bed_temperature = 70 322 | cooling = 1 323 | disable_fan_first_layers = 3 324 | fan_below_layer_time = 20 325 | filament_colour = #FF8000 326 | filament_max_volumetric_speed = 8 327 | filament_type = PETG 328 | filament_density = 1.27 329 | filament_cost = 20 330 | first_layer_bed_temperature = 70 331 | first_layer_temperature = 240 332 | fan_always_on = 1 333 | max_fan_speed = 50 334 | min_fan_speed = 20 335 | bridge_fan_speed = 100 336 | temperature = 240 337 | 338 | [filament:*ABS*] 339 | inherits = *common* 340 | bed_temperature = 100 341 | cooling = 0 342 | disable_fan_first_layers = 3 343 | fan_below_layer_time = 20 344 | filament_colour = #FFF2EC 345 | filament_max_volumetric_speed = 11 346 | filament_type = ABS 347 | filament_density = 1.04 348 | filament_cost = 20 349 | first_layer_bed_temperature = 100 350 | first_layer_temperature = 245 351 | fan_always_on = 0 352 | max_fan_speed = 0 353 | min_fan_speed = 0 354 | bridge_fan_speed = 30 355 | top_fan_speed = 0 356 | temperature = 245 357 | 358 | [filament:*TPU*] 359 | inherits = *common* 360 | filament_type = TPU 361 | filament_density = 1.14 362 | first_layer_temperature = 230 363 | temperature = 225 364 | filament_vendor = Generic 365 | extrusion_multiplier = 1 366 | filament_colour = #42BDD8 367 | first_layer_bed_temperature = 50 368 | bed_temperature = 50 369 | min_fan_speed = 70 370 | max_fan_speed = 100 371 | bridge_fan_speed = 80 372 | fan_below_layer_time = 30 373 | slowdown_below_layer_time = 15 374 | min_print_speed = 15 375 | fan_always_on = 1 376 | cooling = 1 377 | filament_max_volumetric_speed = 1.2 378 | filament_retract_length = 1.2 379 | filament_retract_speed = 25 380 | filament_deretract_speed = 25 381 | filament_retract_lift = 0 382 | filament_wipe = nil 383 | filament_retract_before_wipe = nil 384 | filament_retract_before_travel = 2 385 | filament_retract_layer_change = 0 386 | filament_notes = "Material Description\nTPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing." 387 | 388 | [filament:Generic PLA @ELEGOO] 389 | inherits = *PLA* 390 | start_filament_gcode = 391 | end_filament_gcode = 392 | filament_vendor = Generic 393 | 394 | 395 | [filament:Generic PETG @ELEGOO] 396 | inherits = *PET* 397 | start_filament_gcode = 398 | end_filament_gcode = 399 | filament_vendor = Generic 400 | 401 | [filament:Generic ABS @ELEGOO] 402 | inherits = *ABS* 403 | start_filament_gcode = 404 | end_filament_gcode = 405 | first_layer_bed_temperature = 90 406 | bed_temperature = 90 407 | filament_vendor = Generic 408 | 409 | [filament:Generic TPU-95A @ELEGOO] 410 | inherits = *TPU* 411 | start_filament_gcode = 412 | end_filament_gcode = 413 | bed_temperature = 50 414 | filament_vendor = Generic 415 | 416 | 417 | 418 | 419 | 420 | [filament:Generic PLA-K0.1 @ELEGOO] 421 | inherits = *PLA* 422 | start_filament_gcode = "M900 K0.1; Filament gcode LA 1.5" 423 | end_filament_gcode = "M900 K0.0" 424 | filament_vendor = Generic 425 | 426 | 427 | [filament:Generic PETG-K0.11 @ELEGOO] 428 | inherits = *PET* 429 | start_filament_gcode = "M900 K0.11; Filament gcode LA 1.5" 430 | end_filament_gcode = "M900 K0.0" 431 | filament_vendor = Generic 432 | 433 | [filament:Generic ABS-K0.08 @ELEGOO] 434 | inherits = *ABS* 435 | start_filament_gcode = "M900 K0.08; Filament gcode LA 1.5" 436 | end_filament_gcode = "M900 K0.0" 437 | first_layer_bed_temperature = 90 438 | bed_temperature = 90 439 | filament_vendor = Generic 440 | 441 | [filament:Generic TPU-95A-K0.55 @ELEGOO] 442 | inherits = *TPU* 443 | start_filament_gcode = "M900 K0.55; Filament gcode LA 1.5" 444 | end_filament_gcode = "M900 K0.0" 445 | bed_temperature = 50 446 | filament_vendor = Generic 447 | 448 | 449 | # Common printer preset 450 | [printer:*common*] 451 | printer_technology = FFF 452 | before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;G92 E0\n;[layer_z]\n\n 453 | bed_shape = 0x0,235x0,235x235,0x235 454 | between_objects_gcode = 455 | pause_print_gcode = 456 | deretract_speed = 0 457 | extruder_colour = #FCE94F 458 | extruder_offset = 0x0 459 | gcode_flavor = marlin 460 | silent_mode = 0 461 | remaining_times = 0 462 | machine_max_acceleration_e = 5000 463 | machine_max_acceleration_extruding = 500 464 | machine_max_acceleration_retracting = 1000 465 | machine_max_acceleration_x = 500 466 | machine_max_acceleration_y = 500 467 | machine_max_acceleration_z = 100 468 | machine_max_feedrate_e = 60 469 | machine_max_feedrate_x = 500 470 | machine_max_feedrate_y = 500 471 | machine_max_feedrate_z = 10 472 | machine_max_jerk_e = 5 473 | machine_max_jerk_x = 8 474 | machine_max_jerk_y = 8 475 | machine_max_jerk_z = 0.4 476 | machine_min_extruding_rate = 0 477 | machine_min_travel_rate = 0 478 | layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] 479 | max_layer_height = 0.3 480 | min_layer_height = 0.07 481 | max_print_height = 250 482 | nozzle_diameter = 0.4 483 | printer_notes = 484 | printer_settings_id = 485 | retract_before_travel = 2 486 | retract_before_wipe = 0% 487 | retract_layer_change = 1 488 | retract_length = 1 489 | retract_length_toolchange = 1 490 | retract_lift = 0 491 | retract_lift_above = 0 492 | retract_lift_below = 0 493 | retract_restart_extra = 0 494 | retract_restart_extra_toolchange = 0 495 | retract_speed = 35 496 | single_extruder_multi_material = 0 497 | thumbnails = 16x16,220x124 498 | toolchange_gcode = 499 | use_firmware_retraction = 0 500 | use_relative_e_distances = 0 501 | use_volumetric_e = 0 502 | variable_layer_height = 1 503 | wipe = 1 504 | z_offset = 0 505 | printer_model = 506 | default_print_profile = 0.20mm NORMAL @ELEGOO 507 | default_filament_profile = Generic PLA @ELEGOO 508 | 509 | [printer:Elegoo Neptune-2] 510 | inherits = *common* 511 | printer_model = NEPTUNE2 512 | printer_variant = 0.4 513 | max_layer_height = 0.28 514 | min_layer_height = 0.08 515 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN 516 | max_print_height = 250 517 | machine_max_acceleration_e = 5000 518 | machine_max_acceleration_extruding = 1000 519 | machine_max_acceleration_retracting = 1000 520 | machine_max_acceleration_x = 1000 521 | machine_max_acceleration_y = 1000 522 | machine_max_acceleration_z = 100 523 | machine_max_feedrate_e = 60 524 | machine_max_feedrate_x = 300 525 | machine_max_feedrate_y = 300 526 | machine_max_feedrate_z = 10 527 | machine_max_jerk_e = 5 528 | machine_max_jerk_x = 8 529 | machine_max_jerk_y = 8 530 | machine_max_jerk_z = 0.4 531 | machine_min_extruding_rate = 0 532 | machine_min_travel_rate = 0 533 | nozzle_diameter = 0.4 534 | retract_before_travel = 2 535 | retract_length = 5 536 | retract_speed = 60 537 | deretract_speed = 40 538 | retract_before_wipe = 70% 539 | start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 540 | end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors 541 | 542 | 543 | # Intended for printers with a smaller bed 544 | # [printer:*fastabl*] 545 | # start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 546 | 547 | # Intended for printers with a larger bed 548 | # [printer:*slowabl*] 549 | # start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 550 | 551 | # Intended for printers with vendor official firmware verified to support M25 552 | # [printer:*pauseprint*] 553 | # pause_print_gcode = M25 ; pause print 554 | 555 | # Intended for printers where the Z-axis lowers the print bed during printing 556 | # [printer:*invertedz*] 557 | # end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors 558 | 559 | # Intended for printers with dual extruders and a single hotend/nozzle 560 | [printer:*dualextruder*] 561 | single_extruder_multi_material = 1 562 | cooling_tube_length = 23 563 | cooling_tube_retraction = 35 564 | extra_loading_move = -2 565 | parking_pos_retraction = 80 566 | deretract_speed = 40,40 567 | extruder_colour = #0080C0;#FFFF9F 568 | extruder_offset = 0x0,0x0 569 | max_layer_height = 0.28,0.28 570 | min_layer_height = 0.08,0.08 571 | nozzle_diameter = 0.4,0.4 572 | retract_before_travel = 2,2 573 | retract_before_wipe = 70%,70% 574 | retract_layer_change = 1,1 575 | retract_length = 5,5 576 | retract_length_toolchange = 1,1 577 | retract_lift = 0,0 578 | retract_lift_above = 0,0 579 | retract_lift_below = 0,0 580 | retract_restart_extra = 0,0 581 | retract_restart_extra_toolchange = 0,0 582 | retract_speed = 60,60 583 | wipe = 1,1 584 | start_gcode = T[initial_tool] ; set active extruder\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder 585 | end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors 586 | 587 | # Copy of Creality CR-X config for the Neptune 2D (dual extruder, single hotend) 588 | 589 | [printer:Elegoo Neptune-2D] 590 | inherits = Elegoo Neptune-2; *dualextruder* 591 | retract_length = 6,6 592 | printer_model = NEPTUNE2D 593 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 594 | 595 | [printer:Elegoo Neptune-2S] 596 | inherits = Elegoo Neptune-2 597 | printer_model = NEPTUNE2S 598 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 599 | 600 | [printer:Elegoo Neptune-X] 601 | inherits = Elegoo Neptune-2 602 | max_print_height = 300 603 | printer_model = NEPTUNEX 604 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 605 | 606 | [printer:Elegoo Neptune-3] 607 | inherits = Elegoo Neptune-2 608 | max_print_height = 280 609 | start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S140 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S[first_layer_bed_temperature] ; set final bed temp\nM109 S140 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 610 | before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;G92 E0\n;[layer_z]\n\n 611 | use_relative_e_distances = 0 612 | printer_model = NEPTUNE3 613 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 614 | 615 | [printer:Elegoo Neptune-1] 616 | inherits = Elegoo Neptune-2 617 | bed_shape = 0x0,210x0,210x210,0x210 618 | max_print_height = 200 619 | printer_model = NEPTUNE1 620 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 621 | 622 | [printer:Elegoo Neptune-3Pro] 623 | inherits = Elegoo Neptune-2 624 | max_print_height = 280 625 | retract_length = 0.8 626 | printer_model = NEPTUNE3PRO 627 | start_gcode = G90 ; use absolute coordinates\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM104 S{first_layer_temperature[0]-60} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]-60} ; set temporary nozzle temp to prevent oozing during homing\nG28 ;home\nM420 S1 ; load mesh\nG1 Z10 F240\nG1 X2 Y10 F3000\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG92 E0 ;Reset Extruder\nG1 Z0.45 F300\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E15 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E30 ;Draw the second line\nG92 E0 ;Reset Extruder 628 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 629 | 630 | [printer:Elegoo Neptune-3Plus] 631 | inherits = Elegoo Neptune-3Pro 632 | bed_shape = 0x0,330x0,330x330,0x330 633 | max_print_height = 410 634 | printer_model = NEPTUNE3PLUS 635 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 636 | 637 | [printer:Elegoo Neptune-3Max] 638 | inherits = Elegoo Neptune-3Pro 639 | bed_shape = 0x0,426x0,426x426,0x426 640 | max_print_height = 510 641 | printer_model = NEPTUNE3MAX 642 | printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN 643 | --------------------------------------------------------------------------------