├── LICENSE ├── OT-One Pro BOM .xlsx ├── OTOne_BOM.xls ├── R1.xlsx ├── README.md └── models ├── 0.75mL tube TOP rack.stl ├── 100 - Y-home switch.stl ├── 1001_A_Baseplate.dxf ├── 1002_Motor_Mount_Plate.dxf ├── 1004_Home_Switch_Mount_Set.dxf ├── 1005_Z_Rail_Spacer.dxf ├── 1006_Pipette_Rail_Mount.dxf ├── 1007_A_Motor Mount_Set.dxf ├── 1008_Z_Motor_Mount.dxf ├── 1009_Z_Motor_Lock.dxf ├── 1010_Cable_Rail_Bracket_A.stl ├── 1011_Baseplate_Rails.dxf ├── 1012_Camera_Mount.dxf ├── 1013_Etips_Rack_Top.dxf ├── 1014_Etips_Rack_Bottom.dxf ├── 1100_F_Belt_Clip.stl ├── 1102_Pipette_Stopper.stl ├── 1151_Z_Switch_F1.stl ├── 132_camera_D.stl ├── 15-50mL tube TOP rack.stl ├── 2mL tube TOP rack.stl ├── 498_C.stl ├── Accupet Pipette Clamp.STL ├── Axygen Multichannel Pipette Stabilizer.stl ├── Axygen Pipette Clamps .STL ├── Axygen Pipette Rail Plate.STL ├── BioHit:Sartorius pipette clamps.STL ├── Camera Mount.STL ├── ClipHolder.STL ├── Cobra Multichannel pipette Stabilizer.STL ├── Cobra Pipette clamp (bottom).STL ├── Cobra Pipette clamp(top).STL ├── Cobra Pipettor Rail.STL ├── Cold deck top frame.STL ├── Corning Multichannel Pipette Stabilizer.stl ├── Corning Pipette Clamps .STL ├── Corning Pipette Rail Plate.STL ├── DragonLab Multichannel Pipette Stabilizer.stl ├── DragonLab Pipette Clamps.stl ├── Eppendorf ES-8-300 Pipette Clamp.STL ├── Eppendorf ES-8-300 Pipette Stabilizer.STL ├── GEB 1000uL Tip Rack Adaptor.STL ├── GEB 10uL Tip Rack Adaptor.STL ├── GEB Tip Rack.STL ├── Gilson Pipette clamp(top).STL ├── Gilson Pipette clamp.STL ├── Gilson Pipettor Rail.STL ├── Home switch(X,A,B).stl ├── HomeSwitchCableClip.stl ├── Hood Camera Mount.STL ├── Hood OTMC Back Plate (Hub).stl ├── Hood OTMC box lock.stl ├── Life Gene 1250 uL tip rack adaptor.STL ├── Locking L-bracket.STL ├── OT1 Case (Right Side).DXF ├── OT1 Case (left Side).DXF ├── OT1 Case (rear).DXF ├── OT1 Case (top)new.DXF ├── Pipette Stopper L-bracket.STL ├── Pipette stopper (Left & Center).STL ├── Pro OTMC Back Plate (Hub).STL ├── Rainin 200uL Tip Rack Adaptor .STL ├── Rainin Multichannel Pipet-Lite XLS Adjustable Spacer.stl ├── Rainin Multichannel pipet-lite XLS.stl ├── Rainin Multichannel pipette LTS.stl ├── Rainin Pipette Clamps.STL ├── Rainin Pipette Rail Plate.STL ├── Rainin Tip Rack Adaptor.stl ├── TipOne 1000uL Tip Rack Adaptor.STL ├── TipOne 10:200:300 uL Tip Rack Adaptor.STL ├── TipOne tip rack.stl ├── TipOne tip-rack (1mL).STL ├── Tube rack BOTTOM all sizes.stl ├── Tube rack BOTTOM.STL ├── WVR 200uL Tip Rack Adaptor.STL ├── X-Rail Bracket.stl ├── X-Rail With Y-Cable Slot.stl ├── Z Motor Mount V1.0.stl ├── Z-Home Switch V1.2.stl ├── Z-Home Switch V1.3.STL ├── Z-Motor Lock V1.3.STL └── Z-Motor Mount V1.2.STL /LICENSE: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/LICENSE -------------------------------------------------------------------------------- /OT-One Pro BOM .xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/OT-One Pro BOM .xlsx -------------------------------------------------------------------------------- /OTOne_BOM.xls: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/OTOne_BOM.xls -------------------------------------------------------------------------------- /R1.xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/R1.xlsx -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/README.md -------------------------------------------------------------------------------- /models/0.75mL tube TOP rack.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/0.75mL tube TOP rack.stl -------------------------------------------------------------------------------- /models/100 - Y-home switch.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/100 - Y-home switch.stl -------------------------------------------------------------------------------- /models/1001_A_Baseplate.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1001_A_Baseplate.dxf -------------------------------------------------------------------------------- /models/1002_Motor_Mount_Plate.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1002_Motor_Mount_Plate.dxf -------------------------------------------------------------------------------- /models/1004_Home_Switch_Mount_Set.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1004_Home_Switch_Mount_Set.dxf -------------------------------------------------------------------------------- /models/1005_Z_Rail_Spacer.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1005_Z_Rail_Spacer.dxf -------------------------------------------------------------------------------- /models/1006_Pipette_Rail_Mount.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1006_Pipette_Rail_Mount.dxf -------------------------------------------------------------------------------- /models/1007_A_Motor Mount_Set.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1007_A_Motor Mount_Set.dxf -------------------------------------------------------------------------------- /models/1008_Z_Motor_Mount.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1008_Z_Motor_Mount.dxf -------------------------------------------------------------------------------- /models/1009_Z_Motor_Lock.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1009_Z_Motor_Lock.dxf -------------------------------------------------------------------------------- /models/1010_Cable_Rail_Bracket_A.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1010_Cable_Rail_Bracket_A.stl -------------------------------------------------------------------------------- /models/1011_Baseplate_Rails.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1011_Baseplate_Rails.dxf -------------------------------------------------------------------------------- /models/1012_Camera_Mount.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1012_Camera_Mount.dxf -------------------------------------------------------------------------------- /models/1013_Etips_Rack_Top.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1013_Etips_Rack_Top.dxf -------------------------------------------------------------------------------- /models/1014_Etips_Rack_Bottom.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1014_Etips_Rack_Bottom.dxf -------------------------------------------------------------------------------- /models/1100_F_Belt_Clip.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1100_F_Belt_Clip.stl -------------------------------------------------------------------------------- /models/1102_Pipette_Stopper.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1102_Pipette_Stopper.stl -------------------------------------------------------------------------------- /models/1151_Z_Switch_F1.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/1151_Z_Switch_F1.stl -------------------------------------------------------------------------------- /models/132_camera_D.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/132_camera_D.stl -------------------------------------------------------------------------------- /models/15-50mL tube TOP rack.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/15-50mL tube TOP rack.stl -------------------------------------------------------------------------------- /models/2mL tube TOP rack.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/2mL tube TOP rack.stl -------------------------------------------------------------------------------- /models/498_C.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/498_C.stl -------------------------------------------------------------------------------- /models/Accupet Pipette Clamp.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Accupet Pipette Clamp.STL -------------------------------------------------------------------------------- /models/Axygen Multichannel Pipette Stabilizer.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Axygen Multichannel Pipette Stabilizer.stl -------------------------------------------------------------------------------- /models/Axygen Pipette Clamps .STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Axygen Pipette Clamps .STL -------------------------------------------------------------------------------- /models/Axygen Pipette Rail Plate.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Axygen Pipette Rail Plate.STL -------------------------------------------------------------------------------- /models/BioHit:Sartorius pipette clamps.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/BioHit:Sartorius pipette clamps.STL -------------------------------------------------------------------------------- /models/Camera Mount.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Camera Mount.STL -------------------------------------------------------------------------------- /models/ClipHolder.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/ClipHolder.STL -------------------------------------------------------------------------------- /models/Cobra Multichannel pipette Stabilizer.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Cobra Multichannel pipette Stabilizer.STL -------------------------------------------------------------------------------- /models/Cobra Pipette clamp (bottom).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Cobra Pipette clamp (bottom).STL -------------------------------------------------------------------------------- /models/Cobra Pipette clamp(top).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Cobra Pipette clamp(top).STL -------------------------------------------------------------------------------- /models/Cobra Pipettor Rail.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Cobra Pipettor Rail.STL -------------------------------------------------------------------------------- /models/Cold deck top frame.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Cold deck top frame.STL -------------------------------------------------------------------------------- /models/Corning Multichannel Pipette Stabilizer.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Corning Multichannel Pipette Stabilizer.stl -------------------------------------------------------------------------------- /models/Corning Pipette Clamps .STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Corning Pipette Clamps .STL -------------------------------------------------------------------------------- /models/Corning Pipette Rail Plate.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Corning Pipette Rail Plate.STL -------------------------------------------------------------------------------- /models/DragonLab Multichannel Pipette Stabilizer.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/DragonLab Multichannel Pipette Stabilizer.stl -------------------------------------------------------------------------------- /models/DragonLab Pipette Clamps.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/DragonLab Pipette Clamps.stl -------------------------------------------------------------------------------- /models/Eppendorf ES-8-300 Pipette Clamp.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Eppendorf ES-8-300 Pipette Clamp.STL -------------------------------------------------------------------------------- /models/Eppendorf ES-8-300 Pipette Stabilizer.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Eppendorf ES-8-300 Pipette Stabilizer.STL -------------------------------------------------------------------------------- /models/GEB 1000uL Tip Rack Adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/GEB 1000uL Tip Rack Adaptor.STL -------------------------------------------------------------------------------- /models/GEB 10uL Tip Rack Adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/GEB 10uL Tip Rack Adaptor.STL -------------------------------------------------------------------------------- /models/GEB Tip Rack.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/GEB Tip Rack.STL -------------------------------------------------------------------------------- /models/Gilson Pipette clamp(top).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Gilson Pipette clamp(top).STL -------------------------------------------------------------------------------- /models/Gilson Pipette clamp.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Gilson Pipette clamp.STL -------------------------------------------------------------------------------- /models/Gilson Pipettor Rail.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Gilson Pipettor Rail.STL -------------------------------------------------------------------------------- /models/Home switch(X,A,B).stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Home switch(X,A,B).stl -------------------------------------------------------------------------------- /models/HomeSwitchCableClip.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/HomeSwitchCableClip.stl -------------------------------------------------------------------------------- /models/Hood Camera Mount.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Hood Camera Mount.STL -------------------------------------------------------------------------------- /models/Hood OTMC Back Plate (Hub).stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Hood OTMC Back Plate (Hub).stl -------------------------------------------------------------------------------- /models/Hood OTMC box lock.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Hood OTMC box lock.stl -------------------------------------------------------------------------------- /models/Life Gene 1250 uL tip rack adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Life Gene 1250 uL tip rack adaptor.STL -------------------------------------------------------------------------------- /models/Locking L-bracket.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Locking L-bracket.STL -------------------------------------------------------------------------------- /models/OT1 Case (Right Side).DXF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/OT1 Case (Right Side).DXF -------------------------------------------------------------------------------- /models/OT1 Case (left Side).DXF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/OT1 Case (left Side).DXF -------------------------------------------------------------------------------- /models/OT1 Case (rear).DXF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/OT1 Case (rear).DXF -------------------------------------------------------------------------------- /models/OT1 Case (top)new.DXF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/OT1 Case (top)new.DXF -------------------------------------------------------------------------------- /models/Pipette Stopper L-bracket.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Pipette Stopper L-bracket.STL -------------------------------------------------------------------------------- /models/Pipette stopper (Left & Center).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Pipette stopper (Left & Center).STL -------------------------------------------------------------------------------- /models/Pro OTMC Back Plate (Hub).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Pro OTMC Back Plate (Hub).STL -------------------------------------------------------------------------------- /models/Rainin 200uL Tip Rack Adaptor .STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin 200uL Tip Rack Adaptor .STL -------------------------------------------------------------------------------- /models/Rainin Multichannel Pipet-Lite XLS Adjustable Spacer.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Multichannel Pipet-Lite XLS Adjustable Spacer.stl -------------------------------------------------------------------------------- /models/Rainin Multichannel pipet-lite XLS.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Multichannel pipet-lite XLS.stl -------------------------------------------------------------------------------- /models/Rainin Multichannel pipette LTS.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Multichannel pipette LTS.stl -------------------------------------------------------------------------------- /models/Rainin Pipette Clamps.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Pipette Clamps.STL -------------------------------------------------------------------------------- /models/Rainin Pipette Rail Plate.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Pipette Rail Plate.STL -------------------------------------------------------------------------------- /models/Rainin Tip Rack Adaptor.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Rainin Tip Rack Adaptor.stl -------------------------------------------------------------------------------- /models/TipOne 1000uL Tip Rack Adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/TipOne 1000uL Tip Rack Adaptor.STL -------------------------------------------------------------------------------- /models/TipOne 10:200:300 uL Tip Rack Adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/TipOne 10:200:300 uL Tip Rack Adaptor.STL -------------------------------------------------------------------------------- /models/TipOne tip rack.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/TipOne tip rack.stl -------------------------------------------------------------------------------- /models/TipOne tip-rack (1mL).STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/TipOne tip-rack (1mL).STL -------------------------------------------------------------------------------- /models/Tube rack BOTTOM all sizes.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Tube rack BOTTOM all sizes.stl -------------------------------------------------------------------------------- /models/Tube rack BOTTOM.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Tube rack BOTTOM.STL -------------------------------------------------------------------------------- /models/WVR 200uL Tip Rack Adaptor.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/WVR 200uL Tip Rack Adaptor.STL -------------------------------------------------------------------------------- /models/X-Rail Bracket.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/X-Rail Bracket.stl -------------------------------------------------------------------------------- /models/X-Rail With Y-Cable Slot.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/X-Rail With Y-Cable Slot.stl -------------------------------------------------------------------------------- /models/Z Motor Mount V1.0.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Z Motor Mount V1.0.stl -------------------------------------------------------------------------------- /models/Z-Home Switch V1.2.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Z-Home Switch V1.2.stl -------------------------------------------------------------------------------- /models/Z-Home Switch V1.3.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Z-Home Switch V1.3.STL -------------------------------------------------------------------------------- /models/Z-Motor Lock V1.3.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Z-Motor Lock V1.3.STL -------------------------------------------------------------------------------- /models/Z-Motor Mount V1.2.STL: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/Opentrons/otone_hardware/HEAD/models/Z-Motor Mount V1.2.STL --------------------------------------------------------------------------------