├── ExpressLRS-3.2.0_ht-ct62.zip
└── README.md


/ExpressLRS-3.2.0_ht-ct62.zip:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/Sekilsgs2/Expresslrs_3.2_HT-CT62_sx1262/HEAD/ExpressLRS-3.2.0_ht-ct62.zip


--------------------------------------------------------------------------------
/README.md:
--------------------------------------------------------------------------------
 1 | # Expresslrs_3.2_HT-CT62_sx1262
 2 | 
 3 | Using Elrs configurator choose local folder with downloaded erls and choose DIY 900 MHz device group and device  DIY 900 RX PWMP
 4 | change needed parameters - freq, pass, wifi and etc..
 5 | 
 6 | ![image](https://github.com/Sekilsgs2/Expresslrs_3.2_HT-CT62_sx1262/assets/5908468/1479f8b6-9ce8-4ae0-a430-eb34c6f3d2af)
 7 | 
 8 | Next build and flash firmware.
 9 | 
10 | HT-CT62 connection diagramm for first flashing (use usb to uart converter 3.3v) - 
11 | 
12 | ![image](https://github.com/Sekilsgs2/Expresslrs_3.2_HT-CT62_sx1262/assets/5908468/32e7d3f5-d1f1-4a7b-8f6b-0575835a1c9f)
13 | 
14 | After flashing - disconnect gnd from gpio 9 - and can using module as erls rx. 200ghz and 100hz 8ch - not working with sx127x modules because not compatible at SF6.
15 | Working 100hz, 50hz, 25hz hybrid switches...
16 | 
17 | After first flashing - can using wifi for next flashing methods..
18 | 
19 | 
20 | 


--------------------------------------------------------------------------------