├── .gitattributes
├── BabelFish
    └── BabelFish.ino
└── README.md


/.gitattributes:
--------------------------------------------------------------------------------
1 | # Auto detect text files and perform LF normalization
2 | * text=auto
3 | 


--------------------------------------------------------------------------------
/BabelFish/BabelFish.ino:
--------------------------------------------------------------------------------
  1 | #include <IRremote.h>
  2 | 
  3 | int RECV_PIN = 11;
  4 | int BEEP_PIN = 6;
  5 | 
  6 | unsigned long INTERVALL;
  7 | 
  8 | 
  9 | unsigned long SamsTVon = 0xE0E040BF;
 10 | unsigned long SamsVolPlus = 0xE0E0E01F;
 11 | unsigned long SamsVolMinus = 0xE0E0D02F;
 12 | unsigned long SamsVolMute = 0xE0E0F00F;
 13 | 
 14 | unsigned long SonyTVon = 0xA90;
 15 | unsigned long SonyTVMinus = 0xC90;
 16 | 
 17 | unsigned long YvolPlus = 0x5EA158A7;
 18 | unsigned long YvolMinus = 0x5EA1D827;
 19 | unsigned long YvolMute = 0x5EA138C7;
 20 | 
 21 | long lastMovement;
 22 | int NBRVOLUME = 5;
 23 | 
 24 | 
 25 | IRrecv irrecv(RECV_PIN);
 26 | 
 27 | IRsend irsend;
 28 | 
 29 | decode_results results;
 30 | 
 31 | void setup()
 32 | {
 33 |   // setup LED pins
 34 |   pinMode(BEEP_PIN, OUTPUT);
 35 |   Serial.begin(9600);
 36 |   // In case the interrupt driver crashes on setup, give a clue
 37 |   // to the user what's going on.
 38 |   Serial.println("Enabling IRin");
 39 |   irrecv.enableIRIn(); // Start the receiver
 40 |   Serial.println("Enabled IRin");
 41 |   lastMovement = millis();
 42 | 
 43 |   INTERVALL = 20 * 60000; // 20 minutes
 44 | }
 45 | 
 46 | void loop() {
 47 |   if (millis() > lastMovement + INTERVALL) {
 48 |     lastMovement = millis();
 49 |     Serial.println("Watchdog");
 50 |     beep();
 51 |     for (int i = 0; i < 8; i++) {
 52 |       irsend.sendSony(SonyTVMinus, 12);
 53 |       delay(20);
 54 |     }
 55 |     irrecv.enableIRIn();
 56 |   }
 57 |   if (irrecv.decode(&results)) {
 58 |     Serial.println(results.value , HEX);
 59 |     irrecv.resume(); // Receive the next value
 60 |     if (results.value == SamsVolPlus) {
 61 |       beep();
 62 |       sendPlus(NBRVOLUME);
 63 |       lastMovement = millis();
 64 |     }
 65 |     if (results.value == SamsVolMinus) {
 66 |       beep();
 67 |       sendMinus(NBRVOLUME);
 68 |       lastMovement = millis();
 69 |     }
 70 |     if (results.value == SamsVolMute) {
 71 |       beep();
 72 |       Serial.println("Mute");
 73 |       irsend.sendNEC(YvolMute, 32);
 74 |       irrecv.enableIRIn();
 75 |       lastMovement = millis();
 76 |     }
 77 |     if (results.value == SamsTVon) {
 78 |       beep();
 79 |       Serial.println("TV on");
 80 |       for (int i = 0; i < 10; i++) {
 81 |         irsend.sendSony(0xA90, 12);
 82 |         delay(40);
 83 |       }
 84 |       irrecv.enableIRIn();
 85 |       lastMovement = millis();
 86 |     }
 87 |   }
 88 | }
 89 | 
 90 | void sendPlus(int nbr) {
 91 |   int i = nbr;
 92 |   Serial.println("Plus");
 93 |   while (i > 1) {
 94 |     irsend.sendNEC(YvolPlus, 32);
 95 |     irrecv.enableIRIn();
 96 |     delay(400);
 97 |     i--;
 98 |   }
 99 |   irsend.sendNEC(YvolPlus, 32);
100 |   irrecv.enableIRIn();
101 | }
102 | 
103 | void sendMinus(int nbr) {
104 |   int i = nbr;
105 |   Serial.println("Minus");
106 |   while (i > 1) {
107 |     irsend.sendNEC(YvolMinus, 32);
108 |     irrecv.enableIRIn();
109 |     delay(400);
110 |     i--;
111 |   }
112 |   irsend.sendNEC(YvolMinus, 32);
113 |   irrecv.enableIRIn();
114 | 
115 | }
116 | 
117 | void beep() {
118 |   digitalWrite(BEEP_PIN, HIGH);
119 |   delay(100);
120 |   digitalWrite(BEEP_PIN, LOW);
121 | }
122 | 


--------------------------------------------------------------------------------
/README.md:
--------------------------------------------------------------------------------
1 | # IR-Babelfish
2 | 
3 | 
4 | Code for video: https://youtu.be/5yyy7h7qh80
5 | 


--------------------------------------------------------------------------------