├── fdm_requirements.txt ├── conandata.yml ├── run_check_material_profiles.sh ├── .gitignore ├── .github └── workflows │ ├── process-pull-request.yml │ ├── cicd.yml │ ├── build_on_push_pr.yml │ └── conan-package.yml ├── CPackConfig.cmake ├── fiberlogy_hd_pla.xml.fdm_material ├── polyflex_pla.xml.fdm_material ├── polywood_pla.xml.fdm_material ├── scripts └── update_version_by_one.py ├── docker_env ├── buildenv_check.sh ├── Dockerfile └── make_docker.sh ├── innofill_innoflex60_175.xml.fdm_material ├── redd_asa.xml.fdm_material ├── redd_petg.xml.fdm_material ├── redd_tpe.xml.fdm_material ├── filo3d_pla.xml.fdm_material ├── filo3d_pla_red.xml.fdm_material ├── redd_abs.xml.fdm_material ├── redd_hips.xml.fdm_material ├── redd_nylon.xml.fdm_material ├── redd_pla.xml.fdm_material ├── filo3d_pla_green.xml.fdm_material ├── goofoo_pa.xml.fdm_material ├── goofoo_pc.xml.fdm_material ├── goofoo_pva.xml.fdm_material ├── chromatik_pla.xml.fdm_material ├── goofoo_abs.xml.fdm_material ├── goofoo_hips.xml.fdm_material ├── goofoo_petg.xml.fdm_material ├── goofoo_pla.xml.fdm_material ├── octofiber_pla.xml.fdm_material ├── goofoo_bronze_pla.xml.fdm_material ├── goofoo_esilk_pla.xml.fdm_material ├── goofoo_pa_cf.xml.fdm_material ├── goofoo_peek.xml.fdm_material ├── goofoo_tpe_83a.xml.fdm_material ├── goofoo_tpu_87a.xml.fdm_material ├── goofoo_tpu_95a.xml.fdm_material ├── goofoo_wood_pla.xml.fdm_material ├── goofoo_emarble_pla.xml.fdm_material ├── fabtotum_pla.xml.fdm_material ├── polymax_pla.xml.fdm_material ├── polyplus_pla.xml.fdm_material ├── goofoo_asa.xml.fdm_material ├── .gitlab-ci.yml ├── fabtotum_abs.xml.fdm_material ├── run_shellcheck.sh ├── eSUN_PETG_Grey.xml.fdm_material ├── eSUN_PETG_Black.xml.fdm_material ├── eSUN_PETG_Purple.xml.fdm_material ├── ideagen3D_ToughPLA.xml.fdm_material ├── fabtotum_tpu.xml.fdm_material ├── xyzprinting_tpu.xml.fdm_material ├── xyzprinting_pc.xml.fdm_material ├── Vertex_Delta_PET.xml.fdm_material ├── Vertex_Delta_PLA.xml.fdm_material ├── Vertex_Delta_PLA_Mat.xml.fdm_material ├── volumic_cu80_ultra.xml.fdm_material ├── xyzprinting_colorinkjet_pla.xml.fdm_material ├── Vertex_Delta_PLA_Satin.xml.fdm_material ├── Vertex_Delta_PLA_Wood.xml.fdm_material ├── Vertex_Delta_PLA_Glitter.xml.fdm_material ├── eSUN_PLA_PRO_Grey.xml.fdm_material ├── volumic_br80_ultra.xml.fdm_material ├── eSUN_PLA_PRO_Black.xml.fdm_material ├── eSUN_PLA_PRO_Purple.xml.fdm_material ├── eSUN_PLA_PRO_White.xml.fdm_material ├── eazao_clay.xml.fdm_material ├── zyyx_pro_pla.xml.fdm_material ├── xyzprinting_petcf15.xml.fdm_material ├── CMakeLists.txt ├── fabtotum_nylon.xml.fdm_material ├── xyzprinting_pahtcf15.xml.fdm_material ├── Vertex_Delta_ABS.xml.fdm_material ├── volumic_bumper_ultra.xml.fdm_material ├── volumic_asa_ultra.xml.fdm_material ├── fdplast_abs_tomato.xml.fdm_material ├── fdplast_pla_olive.xml.fdm_material ├── volumic_flex93_ultra.xml.fdm_material ├── bestfilament_abs_skyblue.xml.fdm_material ├── bestfilament_pla_green.xml.fdm_material ├── volumic_medical_ultra.xml.fdm_material ├── Vertex_Delta_TPU.xml.fdm_material ├── xyzprinting_nylon.xml.fdm_material ├── xyzprinting_ppgf30.xml.fdm_material ├── zyyx_pro_flex.xml.fdm_material ├── xyzprinting_flexible.xml.fdm_material ├── volumic_pla_ultra.xml.fdm_material ├── volumic_support_ultra.xml.fdm_material ├── volumic_abs_ultra.xml.fdm_material ├── volumic_nylon_ultra.xml.fdm_material ├── volumic_petg_ultra.xml.fdm_material ├── 3D-Fuel_PLA_SnapSupport.xml.fdm_material ├── volumic_petgcarbone_ultra.xml.fdm_material ├── volumic_pekk_carbone.xml.fdm_material ├── volumic_pp_ultra.xml.fdm_material ├── fdplast_petg_gray.xml.fdm_material ├── xyzprinting_metallic_pla.xml.fdm_material ├── bestfilament_petg_orange.xml.fdm_material ├── volumic_arma_ultra.xml.fdm_material ├── generic_cpe_175.xml.fdm_material ├── 3D-Fuel_PLA_PRO_Black.xml.fdm_material ├── volumic_strong_ultra.xml.fdm_material ├── verbatim_bvoh_175.xml.fdm_material ├── eryone_pla.xml.fdm_material ├── eryone_pla_glow.xml.fdm_material ├── eryone_pla_wood.xml.fdm_material ├── eryone_pla_matte.xml.fdm_material ├── generic_bvoh_175.xml.fdm_material ├── generic_tpu_175.xml.fdm_material ├── xyzprinting_carbon_fiber.xml.fdm_material ├── eryone_tpu.xml.fdm_material ├── eryone_petg.xml.fdm_material ├── generic_asa_175.xml.fdm_material ├── xyzprinting_antibact_pla.xml.fdm_material ├── xyzprinting_tough_pla.xml.fdm_material ├── xyzprinting_pla.xml.fdm_material ├── conanfile.py ├── leapfrog_pva_natural.xml.fdm_material ├── layer_one_white_pla.xml.fdm_material ├── layer_one_black_pla.xml.fdm_material ├── leapfrog_abs_natural.xml.fdm_material ├── layer_one_dark_gray_pla.xml.fdm_material ├── leapfrog_epla_natural.xml.fdm_material ├── xyzprinting_petg.xml.fdm_material ├── dsm_arnitel2045_175.xml.fdm_material ├── dsm_novamid1070_175.xml.fdm_material ├── xyzprinting_abs.xml.fdm_material ├── Extrudr_GreenTECPro_Black_175.xml.fdm_material ├── Extrudr_GreenTECPro_Blue_175.xml.fdm_material ├── Extrudr_GreenTECPro_Red_175.xml.fdm_material ├── Extrudr_GreenTECPro_White_175.xml.fdm_material ├── Extrudr_GreenTECPro_Anthracite_175.xml.fdm_material ├── Extrudr_GreenTECPro_Nature_175.xml.fdm_material ├── Extrudr_GreenTECPro_Silver_175.xml.fdm_material ├── generic_hips_175.xml.fdm_material ├── tizyx_pva.xml.fdm_material ├── tizyx_pla_bois.xml.fdm_material ├── structur3d_dap100silicone.xml.fdm_material ├── generic_pva_175.xml.fdm_material ├── tizyx_petg.xml.fdm_material ├── generic_hips.xml.fdm_material ├── imade3d_pla_175.xml.fdm_material ├── tizyx_abs.xml.fdm_material ├── generic_pc_175.xml.fdm_material ├── tizyx_flex.xml.fdm_material ├── emotiontech_nylon_1030.xml.fdm_material ├── emotiontech_nylon_1070.xml.fdm_material ├── emotiontech_nylon_1030cf.xml.fdm_material ├── generic_nylon_175.xml.fdm_material ├── ultimaker_metallic_pla_175.xml.fdm_material └── imade3d_petg_175.xml.fdm_material /fdm_requirements.txt: -------------------------------------------------------------------------------- 1 | lxml==6.0.0 2 | -------------------------------------------------------------------------------- /conandata.yml: -------------------------------------------------------------------------------- 1 | version: "5.12.0-alpha.0" 2 | -------------------------------------------------------------------------------- /run_check_material_profiles.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | set -eu 4 | 5 | . ./docker_env/make_docker.sh 6 | 7 | run_in_docker python3 scripts/check_material_profiles.py || echo "Failed!" 8 | 9 | exit 0 10 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | #IDEs 2 | .idea 3 | 4 | cura_build/* 5 | jedi_build/* 6 | build/* 7 | _build_armhf/* 8 | *.deb 9 | .coverage 10 | 11 | !cura_build/CMakeList.txt 12 | !jedi_build/CMakeList.txt 13 | !jedi_build/CPackConfig.cmake 14 | /conanbuildinfo.txt 15 | /graph_info.json 16 | 17 | *.bak 18 | *~ 19 | -------------------------------------------------------------------------------- /.github/workflows/process-pull-request.yml: -------------------------------------------------------------------------------- 1 | name: process-pull-request 2 | 3 | on: 4 | pull_request_target: 5 | types: [ opened, reopened, edited, review_requested, ready_for_review, assigned ] 6 | 7 | jobs: 8 | add_label: 9 | uses: ultimaker/cura-workflows/.github/workflows/process-pull-request.yml@main 10 | secrets: inherit -------------------------------------------------------------------------------- /.github/workflows/cicd.yml: -------------------------------------------------------------------------------- 1 | name: CI/CD 2 | on: [push, pull_request] 3 | jobs: 4 | build: 5 | name: Validate 6 | runs-on: ubuntu-latest 7 | container: python:3.7-slim 8 | steps: 9 | - name: Checkout master 10 | uses: actions/checkout@v4 11 | - name: Install lxml 12 | run: python -m pip install lxml==4.6.5 13 | - name: 14 | run: python scripts/check_material_profiles.py 15 | -------------------------------------------------------------------------------- /CPackConfig.cmake: -------------------------------------------------------------------------------- 1 | set(CPACK_PACKAGE_VENDOR "Ultimaker") 2 | set(CPACK_PACKAGE_CONTACT "Ultimaker ") 3 | set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Ultimaker Embedded services") 4 | set(CPACK_PACKAGE_VERSION_MAJOR 999) 5 | set(CPACK_PACKAGE_VERSION_MINOR 999) 6 | set(CPACK_PACKAGE_VERSION_PATCH 999) 7 | set(CPACK_GENERATOR "DEB") 8 | set(CPACK_DEBIAN_PACKAGE_ARCHITECTURE all) 9 | 10 | include(CPack) 11 | -------------------------------------------------------------------------------- /fiberlogy_hd_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Fiberlogy HD 6 | PLA 7 | Generic 8 | 9 | 78f8b7d3-e129-4ba3-bdb1-1c9eed8a923f 10 | 1 11 | #dba500 12 | 13 | 14 | 1.24 15 | 1.74 16 | 17 | 18 | 210 19 | 20 | 21 | -------------------------------------------------------------------------------- /polyflex_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Polymaker 6 | 7 | PLA 8 | Generic 9 | 10 | 88924e7b-a124-418f-a9b5-9fa56dbc47a3 11 | 1 12 | #ffc924 13 | 14 | 15 | 1.24 16 | 1.75 17 | 18 | 19 | 230 20 | 21 | 22 | -------------------------------------------------------------------------------- /polywood_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Polymaker 6 | 7 | PLA 8 | Generic 9 | 10 | adda5a78-f1e8-42e5-8837-6d6e6297dfa9 11 | 1 12 | #ffeecc 13 | 14 | 15 | 1.24 16 | 1.75 17 | 18 | 19 | 210 20 | 21 | 22 | -------------------------------------------------------------------------------- /scripts/update_version_by_one.py: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env python 2 | import os 3 | import sys 4 | 5 | 6 | if __name__ == '__main__': 7 | for filename in sys.argv[1:]: 8 | with open(filename, 'r', encoding='utf-8') as f: 9 | lines = f.readlines() 10 | for i, line in enumerate(lines): 11 | if "" in line.strip() and "" in line.strip(): 12 | idx = line.find("") + len("") 13 | idx2 = line.find("") 14 | num = int(line[idx:idx2]) 15 | num += 1 16 | new_line = line[:idx] + str(num) + line[idx2:] 17 | lines[i] = new_line 18 | break 19 | with open(filename, 'w', encoding='utf-8') as f: 20 | f.writelines(lines) 21 | -------------------------------------------------------------------------------- /docker_env/buildenv_check.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | set -eu 4 | 5 | CROSS_COMPILE="${CROSS_COMPILE:-""}" 6 | 7 | COMMANDS=" \ 8 | cmake \ 9 | make \ 10 | python3 \ 11 | pip3 \ 12 | git \ 13 | " 14 | result=0 15 | 16 | echo_line(){ 17 | echo "--------------------------------------------------------------------------------" 18 | } 19 | 20 | check_command_installation() 21 | { 22 | for pkg in ${COMMANDS}; do 23 | PATH="${PATH}:/sbin:/usr/sbin:/usr/local/sbin" command -V "${pkg}" || result=1 24 | done 25 | } 26 | 27 | echo_line 28 | echo "Verifying build environment commands:" 29 | check_command_installation 30 | echo_line 31 | 32 | if [ "${result}" -ne 0 ]; then 33 | echo "ERROR: Missing preconditions, cannot continue." 34 | exit 1 35 | fi 36 | 37 | echo_line 38 | echo "Build environment OK" 39 | echo_line 40 | 41 | exit 0 42 | -------------------------------------------------------------------------------- /docker_env/Dockerfile: -------------------------------------------------------------------------------- 1 | FROM --platform=linux/amd64 registry.hub.docker.com/library/debian:bookworm 2 | 3 | # Set up a Python virtual environment. 4 | # This isolates project dependencies from the system's Python. 5 | # We include --system-site-packages to allow access to apt-installed modules 6 | # like dbus or gi, which are often system-level dependencies. 7 | ENV VIRTUAL_ENV=/opt/venv 8 | ENV PATH="/opt/venv/bin:$PATH" 9 | 10 | LABEL Maintainer="software-embedded-platform@ultimaker.com" \ 11 | Comment="Ultimaker update-tools filesystem" 12 | 13 | RUN apt-get update && apt-get -y install cmake make python3 python3-pip python3-venv git libxml2-dev libxslt-dev 14 | 15 | # Create the Python virtual environment. 16 | RUN python3 -m venv --system-site-packages ${VIRTUAL_ENV} 17 | 18 | COPY docker_env/buildenv_check.sh buildenv_check.sh 19 | 20 | COPY fdm_requirements.txt fdm_requirements.txt 21 | 22 | RUN pip3 install -r fdm_requirements.txt 23 | -------------------------------------------------------------------------------- /innofill_innoflex60_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Innofill 6 | Innoflex 60 7 | Generic 8 | 9 | 093c0407-a7ab-4772-a2a1-4c52677f11d3 10 | 3 11 | #ecece7 12 | Shore-A hardness of 60. Suitable for applications that require flexibility. 13 | 14 | 15 | 1.23 16 | 1.75 17 | 18 | 19 | 220 20 | true 21 | 22 | 23 | -------------------------------------------------------------------------------- /redd_asa.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | ASA 7 | Generic 8 | 9 | 4fe9c869-7580-4de3-80fd-031cfe47901b 10 | 2 11 | #FFC924 12 | REDD generic ASA profile. 13 | Recommended nozzle temperature: 250 C, bed temperature: 110 C, layer fan: off, adhesion type: raft. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 250 21 | 110 22 | 23 | 24 | -------------------------------------------------------------------------------- /redd_petg.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | PETG 7 | Generic 8 | 9 | 95b51816-6749-4366-9f6a-1d95518cbbb5 10 | 2 11 | #FFC924 12 | REDD generic PETG profile. 13 | Recommended nozzle temperature: 245 C, bed temperature: 80 C, layer fan: off, adhesion type: raft. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 245 21 | 80 22 | 23 | 24 | -------------------------------------------------------------------------------- /redd_tpe.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | TPE 7 | Generic 8 | 9 | f0454f97-2b49-46c0-b1cf-aa2986ac62eb 10 | 2 11 | #FFC924 12 | REDD generic TPE profile. 13 | Recommended nozzle temperature: 240 C, bed temperature: 60 C, layer fan: off, adhesion type: skirt. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 240 21 | 60 22 | 23 | 24 | -------------------------------------------------------------------------------- /filo3d_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Filo3D 6 | PLA 7 | Generic 8 | 9 | cf078efd-d15d-4e6d-8f00-401b5e3f6d19 10 | 1 11 | #ffc924 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | Print on bare glass. Use tape for cold build plates. 14 | 15 | 16 | 1.24 17 | 1.75 18 | 19 | 20 | 205 21 | 22 | 23 | -------------------------------------------------------------------------------- /filo3d_pla_red.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Filo3D 6 | PLA 7 | Red 8 | 9 | 92652f77-93fb-4139-abca-30658ec9e0f9 10 | 1 11 | #bb1e10 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | Print on bare glass. Use tape for cold build plates. 14 | 15 | 16 | 1.24 17 | 1.75 18 | 19 | 20 | 220 21 | 22 | 23 | -------------------------------------------------------------------------------- /redd_abs.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | ABS 7 | Generic 8 | 9 | 5a716a8c-022e-4354-bad1-ae5bad11470a 10 | 2 11 | #FFC924 12 | REDD generic ABS profile. 13 | Recommended nozzle temperature: 235 - 240 C, bed temperature: 110 C, layer fan: off, adhesion type: Raft. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 240 21 | 110 22 | 23 | 24 | -------------------------------------------------------------------------------- /redd_hips.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | HIPS 7 | Generic 8 | 9 | cc227de1-8f69-4742-9569-b7902989328a 10 | 2 11 | #FFC924 12 | REDD generic HIPS profile. 13 | Recommended nozzle temperature: 250 C, bed temperature: 110 C, layer fan: off, adhesion type: raft. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 250 21 | 110 22 | 23 | 24 | -------------------------------------------------------------------------------- /redd_nylon.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | Nylon 7 | Generic 8 | 9 | 1f221d1a-5201-45f6-b143-d1f678224254 10 | 2 11 | #FFC924 12 | REDD generic NYLON profile. 13 | Recommended nozzle temperature: 240 C, bed temperature: 90 C, layer fan: off, adhesion type: raft. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 240 21 | 90 22 | 23 | 24 | -------------------------------------------------------------------------------- /redd_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | REDD 6 | PLA 7 | Generic 8 | 9 | 0526b3f6-3452-4554-8f15-9de224445581 10 | 2 11 | #FFC924 12 | REDD generic PLA profile. 13 | Recommended nozzle temperature: 210 - 215 C, bed temperature: 60 -70 C, layer fan: on, adhesion type: skirt. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 210 21 | 60 22 | 23 | 24 | -------------------------------------------------------------------------------- /filo3d_pla_green.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Filo3D 6 | PLA 7 | Green 8 | 9 | 6a738af3-55ce-4467-b7e2-231a2db58bce 10 | 1 11 | #61993b 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | Print on bare glass. Use tape for cold build plates. 14 | 15 | 16 | 1.24 17 | 1.75 18 | 19 | 20 | 200 21 | 22 | 23 | -------------------------------------------------------------------------------- /goofoo_pa.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PA 7 | Generic 8 | 9 | 10 | 67e9f8b1-bd26-44da-874c-cc62f52df739 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 260 20 | 120 21 | 260 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_pc.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PC 7 | Generic 8 | 9 | 10 | 5793ca11-4b63-46cb-87d6-0162413ebd4a 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 250 20 | 100 21 | 250 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_pva.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PVA 7 | Generic 8 | 9 | 10 | 698750a7-885b-4b50-b83d-daca8e86768f 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 210 20 | 60 21 | 210 22 | 1 23 | 20 24 | 25 | 26 | -------------------------------------------------------------------------------- /chromatik_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Chromatik 6 | PLA 7 | Generic 8 | 9 | 69fd1f24-f411-470e-8158-9e5552f36147 10 | 1 11 | #ffc924 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | Print on bare glass. Use tape for cold build plates. 14 | 15 | 16 | 1.24 17 | 1.74 18 | 19 | 20 | 205 21 | 22 | 23 | -------------------------------------------------------------------------------- /goofoo_abs.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | ABS 7 | Generic 8 | 9 | 10 | f975e1d4-734f-5a0c-b5ac-6551704c2c37 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 240 20 | 80 21 | 240 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_hips.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | HIPS 7 | Generic 8 | 9 | 10 | 018afb87-7e12-4489-87ee-ad482137a583 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 210 20 | 60 21 | 210 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_petg.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PETG 7 | Generic 8 | 9 | 10 | 749281e3-7bec-4432-aa4b-71f38379997f 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 210 20 | 60 21 | 210 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PLA 7 | Generic 8 | 9 | 10 | 89e8eee3-574e-35c5-54c8-c3adf4b53bf8 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 190 20 | 50 21 | 190 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /octofiber_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | OctoFiber 6 | PLA 7 | Generic 8 | 9 | f7aaa835-b1ca-44b1-a35a-746031d3076f 10 | 1 11 | #ffc924 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | Print on bare glass. Use tape for cold build plates. 14 | 15 | 16 | 1.24 17 | 1.74 18 | 19 | 20 | 210 21 | 22 | 23 | -------------------------------------------------------------------------------- /goofoo_bronze_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PLA 7 | Generic 8 | 9 | 10 | a8f825d6-a8e3-4e89-94f0-456b9f0c6d89 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 200 20 | 60 21 | 200 22 | 1 23 | 10 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_esilk_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PLA 7 | Generic 8 | 9 | 10 | 76fc11c6-a0e3-4e5e-a363-5a0b3010b07e 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 200 20 | 60 21 | 200 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_pa_cf.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PA 7 | Generic 8 | 9 | 10 | b288a835-0e10-45cd-b47c-cb32673d4ec1 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 260 20 | 120 21 | 260 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_peek.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PEEK 7 | Generic 8 | 9 | 10 | 7236ce0c-2e2a-4c5a-90f1-00537482761f 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 420 20 | 120 21 | 420 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_tpe_83a.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | TPE 7 | Generic 8 | 9 | 10 | 25359cb4-9b0b-469f-b29c-4c1f5336d36a 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 220 20 | 50 21 | 220 22 | 1 23 | 10 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_tpu_87a.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | TPU 7 | Generic 8 | 9 | 10 | 3bcc8751-3ec0-43b6-9f72-8d8202eaf42c 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 210 20 | 60 21 | 210 22 | 1 23 | 10 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_tpu_95a.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | TPU 7 | Generic 8 | 9 | 10 | ddc7203d-923f-4dd7-bf26-448a0834cdce 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 220 20 | 50 21 | 220 22 | 1 23 | 10 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_wood_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PLA 7 | Generic 8 | 9 | 10 | 6a8a4700-f2be-4a0c-9370-5ef74ac1b22e 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 180 20 | 50 21 | 180 22 | 5 23 | 80 24 | 25 | 26 | -------------------------------------------------------------------------------- /goofoo_emarble_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | PLA 7 | Generic 8 | 9 | 10 | 15d15996-4f14-4edb-bc4c-f8ba06544578 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 200 20 | 60 21 | 200 22 | 4.5 23 | 60 24 | 25 | 26 | -------------------------------------------------------------------------------- /fabtotum_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FABtotum 6 | PLA 7 | Generic 8 | 9 | 2adcb50b-94b5-4393-bcc8-e6d4e45d8a87 10 | 2 11 | #FFC924 12 | FABtotum generic PLA profile. 13 | Recommended nozzle temperature: 190...200C, bed temperature: 40...50C, layer fan: on, adhesion type: skirt. 14 | 15 | 16 | 1.75 17 | 1.24 18 | 19 | 20 | 200.0 21 | 40.0 22 | 23 | 24 | -------------------------------------------------------------------------------- /polymax_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Polymaker 6 | 7 | PLA 8 | Generic 9 | 10 | 4cf5cf01-76b2-43d9-93f0-3b713d5730a8 11 | 1 12 | #ffc924 13 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.24 18 | 1.75 19 | 20 | 21 | 210 22 | 23 | 24 | -------------------------------------------------------------------------------- /polyplus_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Polymaker 6 | 7 | PLA 8 | Generic 9 | 10 | 5b4745da-5b2e-4f3c-bd6c-3d760b9aaef8 11 | 1 12 | #ffc924 13 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.24 18 | 1.75 19 | 20 | 21 | 210 22 | 23 | 24 | -------------------------------------------------------------------------------- /goofoo_asa.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | GOOFOO 6 | ASA 7 | Generic 8 | 9 | 10 | ba91a8a4-ea28-4af8-a7ef-0e9e1bba1994 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 240 20 | 100 21 | 240 22 | 4.5 23 | 60 24 | 0 25 | 26 | 27 | -------------------------------------------------------------------------------- /.github/workflows/build_on_push_pr.yml: -------------------------------------------------------------------------------- 1 | name: Build package on Push or Pull Request 2 | 3 | on: 4 | push 5 | 6 | jobs: 7 | Prepare: 8 | name: 'Prepare' 9 | uses: Ultimaker/embedded-workflows/.github/workflows/prepare_env.yml@main 10 | with: 11 | BUILD_DOCKER_CACHE: true 12 | secrets: inherit 13 | 14 | Build: 15 | name: 'Build' 16 | needs: Prepare 17 | uses: Ultimaker/embedded-workflows/.github/workflows/build.yml@main 18 | with: 19 | RELEASE_VERSION: ${{ needs.Prepare.outputs.RELEASE_VERSION }} 20 | secrets: inherit 21 | 22 | Release_Package: 23 | name: 'Release' 24 | needs: [Prepare, Build] 25 | if: ${{ (success() && needs.Prepare.outputs.RELEASE_REPO != 'none') || 26 | (failure() && needs.Build.result == 'success' && needs.Prepare.outputs.RELEASE_REPO == 'packages-dev') }} 27 | uses: Ultimaker/embedded-workflows/.github/workflows/release_pkg.yml@main 28 | with: 29 | RELEASE_REPO: ${{ needs.Prepare.outputs.RELEASE_REPO }} 30 | secrets: inherit 31 | -------------------------------------------------------------------------------- /.gitlab-ci.yml: -------------------------------------------------------------------------------- 1 | # yamllint disable rule:line-length 2 | # 3 | # Copyright (C) 2019 Ultimaker B.V. 4 | 5 | include: 6 | - project: ultimaker/embedded/prime-jedi 7 | ref: master 8 | file: /gitlab_ci_templates/jedi-gitlab-ci-template.yml 9 | 10 | # Prepare stage, prepares a Docker image based on the Docker file in /docker_env subfolder of the repository. 11 | # To have early feedback when setting up your Docker image, make sure you implement a buildenv_check.sh script, 12 | # see the exeample in this repository. 13 | # ================================================================================== 14 | prepare_environment: 15 | extends: 16 | - .jobs_common 17 | - .environment_common 18 | stage: prepare 19 | variables: 20 | GIT_STRATEGY: clone 21 | script: 22 | - ./make_docker.sh "${BUILD_PIPELINE_IMAGE}" 23 | 24 | XSD_test: 25 | extends: 26 | - .jobs_common 27 | - .build_test_common 28 | stage: test 29 | script: 30 | - git fetch origin master:master 31 | - ./run_check_material_profiles_new_with_lxml.sh 32 | -------------------------------------------------------------------------------- /fabtotum_abs.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FABtotum 6 | ABS 7 | Generic 8 | 9 | 956b9054-e5e8-4852-8f5b-1332b73fcd07 10 | 3 11 | #8CB219 12 | FABtotum generic ABS profile. 13 | Recommended nozzle temperature: 250...260C, bed temperature: 90...100C, layer fan: off...50%, adhesion type: raft. 14 | 15 | 16 | 1.1 17 | 1.75 18 | 19 | 20 | 250.0 21 | 95.0 22 | 36 23 | 24 | 25 | -------------------------------------------------------------------------------- /run_shellcheck.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | # 3 | # Copyright (C) 2019 Ultimaker B.V. 4 | # 5 | # SPDX-License-Identifier: LGPL-3.0+ 6 | 7 | # This script is mandatory in a repository, to make sure the shell scripts are correct and of good quality. 8 | 9 | set -eu 10 | 11 | SHELLCHECK_FAILURE="false" 12 | 13 | # Add your scripts or search paths here 14 | SHELLCHECK_PATHS=" \ 15 | *.sh \ 16 | ./docker_env/*.sh \ 17 | " 18 | 19 | # shellcheck disable=SC2086 20 | SCRIPTS="$(find ${SHELLCHECK_PATHS} -name '*.sh')" 21 | 22 | for script in ${SCRIPTS}; do 23 | if [ ! -r "${script}" ]; then 24 | echo_line 25 | echo "WARNING: skipping shellcheck for '${script}'." 26 | echo_line 27 | continue 28 | fi 29 | 30 | echo "Running shellcheck on '${script}'" 31 | shellcheck -x -C -f tty "${script}" || SHELLCHECK_FAILURE="true" 32 | done 33 | 34 | if [ "${SHELLCHECK_FAILURE}" = "true" ]; then 35 | echo "WARNING: One or more scripts did not pass shellcheck." 36 | exit 1 37 | fi 38 | 39 | echo "All scripts passed shellcheck." 40 | 41 | exit 0 42 | -------------------------------------------------------------------------------- /.github/workflows/conan-package.yml: -------------------------------------------------------------------------------- 1 | name: conan-package 2 | 3 | on: 4 | workflow_dispatch: 5 | push: 6 | paths: 7 | - '*.xml.*' 8 | - '*.sig' 9 | - 'conanfile.py' 10 | - 'conandata.yml' 11 | - '.github/workflows/conan-package.yml' 12 | - '.github/workflows/requirements*.txt' 13 | branches: 14 | - main 15 | - master 16 | - 'CURA-*' 17 | - 'PP-*' 18 | - 'NP-*' 19 | - '[0-9].[0-9]*' 20 | - '[0-9].[0-9][0-9]*' 21 | 22 | jobs: 23 | conan-package: 24 | uses: ultimaker/cura-workflows/.github/workflows/conan-package.yml@main 25 | with: 26 | platform_windows: false 27 | platform_mac: false 28 | install_system_dependencies: false 29 | secrets: inherit 30 | 31 | signal-curator: 32 | needs: conan-package 33 | runs-on: ubuntu-latest 34 | steps: 35 | - name: Trigger Curator Workflow 36 | run: | 37 | gh workflow run --repo ultimaker/curator -r main package.yml 38 | env: 39 | GITHUB_TOKEN: ${{ secrets.CURATOR_TRIGGER_PAT_C3PO }} 40 | -------------------------------------------------------------------------------- /eSUN_PETG_Grey.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PETG 7 | Grey 8 | 9 | #999999 10 | d4d215e9-0344-4caf-a5d5-d2dda7b57e2e 11 | 12 | 1 13 | 14 | 15 | 16 | 1.75 17 | 1.23 18 | 1000 19 | 20 | 21 | 205.0 22 | 40.0 23 | 3 24 | 245.0 25 | 80.0 26 | 20.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /eSUN_PETG_Black.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PETG 7 | Black 8 | 9 | #333333 10 | b4cd8cf7-2e98-44bd-9e4c-600b5d339e54 11 | 12 | 1 13 | 14 | 15 | 16 | 1.75 17 | 1.23 18 | 1000 19 | 20 | 21 | 205.0 22 | 40.0 23 | 3 24 | 245.0 25 | 80.0 26 | 20.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /eSUN_PETG_Purple.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PETG 7 | Purple 8 | 9 | #9900CC 10 | 35162ee9-b39f-4747-b915-d867a93cc7ba 11 | 12 | 1 13 | 14 | 15 | 16 | 1.75 17 | 1.23 18 | 1000 19 | 20 | 21 | 205.0 22 | 40.0 23 | 3 24 | 245.0 25 | 80.0 26 | 20.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /ideagen3D_ToughPLA.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | ideagen3D 6 | Tough PLA 7 | Black 8 | 9 | 10 | 1 11 | #333333 12 | e0825104-a855-407d-a58d-a67a8ed7c24b 13 | 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 195.0 23 | 100.0 24 | 3.0 25 | 210.0 26 | 60.0 27 | 45.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /fabtotum_tpu.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FABtotum 6 | TPU 7 | Generic 8 | 9 | 97e6aaf1-0da2-47f8-a473-16b8b485bcf5 10 | 3 11 | #B22744 12 | FABtotum TPU Black profile. 13 | Recommended nozzle temperature: 210...220C, bed temperature: 40...50C, layer fan: on, adhesion type: skirt. 14 | 15 | 16 | 1.24 17 | 1.75 18 | 19 | 20 | 220.0 21 | 40.0 22 | true 23 | 24 | 25 | -------------------------------------------------------------------------------- /xyzprinting_tpu.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | TPU 7 | Nature White 8 | 9 | 10 | 11 | 0f3dfe82-1e7e-4f45-8269-d6d272cde884 12 | TPU (thermoplastic polyurethane) filaments are tough, strong and durable, and shaped products are soft and elastic. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.25 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 210.0 24 | 45 25 | 210 26 | 27 | 28 | -------------------------------------------------------------------------------- /xyzprinting_pc.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PC 7 | Black 8 | 9 | 10 | 11 | bd60253b-6d27-5cc3-399d-fe94fe9b4cb0 12 | Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ยบC, mechanical strength and toughness. 13 | #0e0e10 14 | 5 15 | 16 | 17 | 1.19 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 250.0 24 | 90 25 | 250 26 | 27 | 28 | -------------------------------------------------------------------------------- /Vertex_Delta_PET.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PET 7 | Generic 8 | 9 | 10 | #ffc924 11 | 0e20a24a-3248-4b9f-96f9-69ee388abd0c 12 | 13 | 4 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 215.0 22 | 10.0 23 | 3.0 24 | 255.0 25 | 0.0 26 | 150.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /Vertex_Delta_PLA.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PLA 7 | Generic 8 | 9 | 10 | #ffc924 11 | 8d2731c8-b209-4202-b5d0-0d2d57070736 12 | 13 | 4 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 190.0 22 | 100.0 23 | 3.0 24 | 200.0 25 | 0.0 26 | 30.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /Vertex_Delta_PLA_Mat.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PLA-Mat 7 | Generic 8 | 9 | 10 | #ffc924 11 | 13256f8c-b72d-401d-afad-89a5b59eaac3 12 | 13 | 1 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 195.0 22 | 100.0 23 | 3.5 24 | 210.0 25 | 0.0 26 | 30.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /volumic_cu80_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | Metal 7 | Generic 8 | 9 | 10 | b0dc1bca-2a22-43bc-bd06-4f9588aa2c6c 11 | PLA Ultra with 80% pure copper. 12 | 2 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 3.4 18 | 1.75 19 | 20 | 21 | 80.0 22 | 1.0 23 | 165.0 24 | 25.0 25 | 45.0 26 | 190.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /xyzprinting_colorinkjet_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PLA 7 | White 8 | 9 | 10 | 11 | a2b4e314-02f3-44fc-847e-e695b98304e9 12 | 3D Color-inkjet PLA is the filament designed for da Vinci Color to bring full color to your 3D-printed models. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.25 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 210.0 24 | 45 25 | 210 26 | 27 | 28 | 29 | -------------------------------------------------------------------------------- /Vertex_Delta_PLA_Satin.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PLA-Satin 7 | Generic 8 | 9 | 10 | #ffc924 11 | 8a73c724-a1d6-40ec-af71-17a6fbe9b019 12 | 13 | 1 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 195.0 22 | 100.0 23 | 3.0 24 | 220.0 25 | 0.0 26 | 30.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /Vertex_Delta_PLA_Wood.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PLA-Wood 7 | Generic 8 | 9 | 10 | #ffc924 11 | 340127b7-2361-4d08-8cea-4a170a9bdbe7 12 | 13 | 1 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 195.0 22 | 75.0 23 | 5.0 24 | 210.0 25 | 0.0 26 | 50.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /Vertex_Delta_PLA_Glitter.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | PLA-Glitter 7 | Generic 8 | 9 | 10 | #ffc924 11 | 29e505c5-a092-4c4f-bf17-725b6c82fd42 12 | 13 | 1 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 195.0 22 | 100.0 23 | 3.0 24 | 210.0 25 | 0.0 26 | 30.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /eSUN_PLA_PRO_Grey.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PLA 7 | Grey 8 | 9 | 10 | #999999 11 | 061cc7c6-77b1-4d76-996f-d049546b41d2 12 | 13 | 2 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 195.0 23 | 100.0 24 | 3 25 | 210.0 26 | 60.0 27 | 40.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_br80_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | Metal 7 | Generic 8 | 9 | 10 | 2 11 | PLA Ultra with 80% pure bronze (no additive). 12 | 3DLac or Dimafix 13 | #00ff00 14 | 948865b1-27bb-45ec-b8de-d56a1ff1bdd0 15 | 16 | 17 | 3.5 18 | 1.75 19 | 20 | 21 | 80.0 22 | 1.0 23 | 165.0 24 | 25.0 25 | 45.0 26 | 190.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /eSUN_PLA_PRO_Black.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PLA 7 | Black 8 | 9 | 10 | #333333 11 | 5c4e29a1-0722-4cfa-b147-338924afc075 12 | 13 | 2 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 195.0 23 | 100.0 24 | 3 25 | 210.0 26 | 60.0 27 | 40.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /eSUN_PLA_PRO_Purple.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PLA 7 | Purple 8 | 9 | 10 | #9900CC 11 | ae0c8895-b4b3-4a12-a5a5-3ae754940ced 12 | 13 | 2 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 195.0 23 | 100.0 24 | 3 25 | 210.0 26 | 60.0 27 | 40.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /eSUN_PLA_PRO_White.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eSUN 6 | PLA 7 | White 8 | 9 | 10 | #EEEEEE 11 | 832e163d-db99-4a58-80b9-f82073ae0a9b 12 | 13 | 2 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 195.0 23 | 100.0 24 | 3 25 | 210.0 26 | 60.0 27 | 40.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /eazao_clay.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eazao 6 | Clay 7 | White 8 | 9 | 10 | e0752072-a685-8721-dfd4-837075eb4f57 11 | 2 12 | #eeeeee 13 | 14 | 15 | 16 | 17 | 1.75 18 | 1600 19 | 800 20 | 21 | 22 | 0 23 | 100.0 24 | 3 25 | 0 26 | 0 27 | 25 28 | 29 | 30 | -------------------------------------------------------------------------------- /zyyx_pro_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | ZYYX 6 | PLA 7 | Generic 8 | 9 | 10 | Use with ZYYX standard build plate 11 | Fast, safe and reliable printing. ZYYX proPLA is ideal for printing parts and prototypes with a great surface quality. 12 | 1 13 | #ffc924 14 | cece7f55-2ccc-4807-bbb6-4a5df9c9df81 15 | 16 | 17 | 1.24 18 | 1.75 19 | 20 | 21 | 210 22 | 0 23 | 200 24 | 100 25 | 26 | 27 | -------------------------------------------------------------------------------- /xyzprinting_petcf15.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PET 7 | Nature White 8 | 9 | 10 | 11 | b5c963c1-2663-9737-7013-05df4e3c51a5 12 | PET CF15 is a kind of wire with good toughness and good gloss, which can withstand high impact force to prevent breakage, suitable for printing card fasteners. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.27 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 260.0 24 | 70 25 | 260 26 | 27 | 28 | -------------------------------------------------------------------------------- /CMakeLists.txt: -------------------------------------------------------------------------------- 1 | project(fdm-materials NONE) 2 | 3 | cmake_minimum_required(VERSION 2.8.12) 4 | 5 | include(CMakePackageConfigHelpers) 6 | 7 | option(EMBEDDED "Build for Ultimaker Embedded software" OFF) 8 | 9 | if(NOT EMBEDDED) 10 | set(INSTALL_PATH "share/cura/resources/materials" 11 | CACHE PATH 12 | "The path to install the materials to. Should ideally be relative to CMAKE_INSTALL_PREFIX" 13 | ) 14 | else() 15 | # Then we're cmaking for Jedi 16 | set(INSTALL_PATH "share/fdm_materials" 17 | CACHE STRING 18 | "Destination to install the materials to. Should be relative to CMAKE_INSTALL_PREFIX") 19 | 20 | if(IS_ABSOLUTE ${INSTALL_PATH}) 21 | set(INSTALL_PATH ${INSTALL_PATH}) 22 | else() 23 | set(INSTALL_PATH ${CMAKE_INSTALL_PREFIX}/${INSTALL_PATH}) 24 | endif() 25 | endif() 26 | 27 | file(GLOB _files *.fdm_material *.sig) 28 | 29 | # Determine version number 30 | find_package(Git) 31 | 32 | if (DEFINED ENV{GITHUB_ACTIONS}) 33 | set(CPACK_PACKAGE_VERSION "${GIT_VERSION}+$ENV{GITHUB_SHA}") 34 | endif() 35 | 36 | install(FILES ${_files} DESTINATION ${INSTALL_PATH}) 37 | 38 | include(CPackConfig.cmake) 39 | -------------------------------------------------------------------------------- /fabtotum_nylon.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FABtotum 6 | Nylon 7 | Generic 8 | 9 | 68c674d6-1289-4a44-8d69-e8a2b1a49855 10 | 4 11 | #3DF266 12 | FABtotum generic Nylon profile. 13 | Recommended nozzle temperature: 230...240C, bed temperature: 80...90C, layer fan: off, adhesion type: raft. 14 | 15 | 16 | 1.14 17 | 1.75 18 | 19 | 20 | 240.0 21 | 90.0 22 | true 23 | 35 24 | 25 | 26 | -------------------------------------------------------------------------------- /xyzprinting_pahtcf15.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PAHT 7 | Nature White 8 | 9 | 10 | 11 | c35c2e96-ef48-7c82-1671-08559df94d1b 12 | PAHT CF15 is a tough, wear-resistant and oil-resistant wire with high strength and high density, which can show excellent surface quality and is not easy to warp during printing. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.15 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 260.0 24 | 70 25 | 260 26 | 27 | 28 | -------------------------------------------------------------------------------- /Vertex_Delta_ABS.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | ABS 7 | Generic 8 | 9 | 10 | #ffc924 11 | 4edd8fce-0851-43e5-808a-970b4bfe8b10 12 | 13 | 4 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 225.0 22 | 0.0 23 | 3.0 24 | 250.0 25 | 0.0 26 | 150.0 27 | 36 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_bumper_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PLA 7 | Generic 8 | 9 | 10 | 2 11 | The Bumper ULTRA, high performance semi-flexible (Shore 60D) for impact-resistant objects. 12 | 3DLac or Dimafix 13 | #00ff00 14 | 7bebd9d6-d485-4c23-b644-34d535e97494 15 | 16 | 17 | 1.3 18 | 1.75 19 | 20 | 21 | 100.0 22 | 0.5 23 | 175.0 24 | 25.0 25 | 50.0 26 | 230.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /volumic_asa_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | ASA 7 | Generic 8 | 9 | 10 | 2 11 | Professional grade ASA (Acrylonitirle Styrene Acrylate) 12 | 831a6fdd-80a7-4f1b-936c-cf77b469a3d4 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.05 18 | 1.75 19 | 20 | 21 | 30.0 22 | 0 23 | 1.2 24 | 180.0 25 | 30.0 26 | 90.0 27 | 245.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /fdplast_abs_tomato.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FDplast 6 | ABS 7 | Tomato 8 | 9 | 10 | Use glue, to avoid chipping of the glass. 11 | faca2421-e10c-4dbf-a1dc-9f3b620fd969 12 | Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85C. 13 | #ff6347 14 | 5 15 | 16 | 17 | 1.1 18 | 1.75 19 | 1000 20 | 21 | 22 | 50.0 23 | 250.0 24 | 100 25 | 210 26 | 27 | 28 | -------------------------------------------------------------------------------- /fdplast_pla_olive.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FDplast 6 | PLA 7 | Olive 8 | 9 | 10 | Print on bare glass. Use tape for cold build plates. 11 | b9865b5d-e8fe-41e6-a0ab-e34c58aa66a2 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | #808000 14 | 5 15 | 16 | 17 | 1.24 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 215.0 24 | 65 25 | 150 26 | 27 | 28 | -------------------------------------------------------------------------------- /volumic_flex93_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | TPU 7 | Generic 8 | 9 | 10 | 2 11 | The Flex93 ULTRA, finally a flexible (Shore 93A) that prints quickly! Print flex quickly with exceptional rendering. 12 | Clean bed, no need of lac 13 | #00ff00 14 | 4fa79814-709b-45f5-b6af-1b61dd4ded15 15 | 16 | 17 | 1.2 18 | 1.75 19 | 20 | 21 | 75.0 22 | 3.0 23 | 175.0 24 | 15.0 25 | 45.0 26 | 235.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /bestfilament_abs_skyblue.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Best Filament 6 | ABS 7 | SkyBlue 8 | 9 | 10 | Use glue, to avoid chipping of the glass. 11 | 17668dfb-eb1c-46a5-a513-bdb7c06959ff 12 | Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85C 13 | #87CEEB 14 | 5 15 | 16 | 17 | 1.1 18 | 1.75 19 | 1000 20 | 21 | 22 | 50.0 23 | 232.0 24 | 90 25 | 200 26 | 27 | 28 | -------------------------------------------------------------------------------- /bestfilament_pla_green.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Best Filament 6 | PLA 7 | Green 8 | 9 | 10 | Print on bare glass. Use tape for cold build plates. 11 | bc3900a5-f6e6-4e94-9a18-2704c303094e 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | #008000 14 | 5 15 | 16 | 17 | 1.24 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 195.0 24 | 60 25 | 150 26 | 27 | 28 | -------------------------------------------------------------------------------- /volumic_medical_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | ABS 7 | Generic 8 | 9 | 10 | 2 11 | The medical ULTRA have a USP Classe VI / ISO 10993-1 certification for medical use. 12 | 3DLac or Dimafix 13 | #00ff00 14 | 397bdd04-a387-4cb8-84c5-f9ee2d792782 15 | 16 | 17 | 1.05 18 | 1.75 19 | 20 | 21 | 30.0 22 | 0 23 | 1.2 24 | 175.0 25 | 30.0 26 | 100.0 27 | 235.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /Vertex_Delta_TPU.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Velleman 6 | TPU 7 | Generic 8 | 9 | 10 | #ffc924 11 | a5ab90e5-9f5d-445b-b0c5-5312dafa2e27 12 | 13 | 4 14 | 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 195.0 22 | 20.0 23 | 3.0 24 | 220.0 25 | 0.0 26 | 150.0 27 | true 28 | 29 | 30 | -------------------------------------------------------------------------------- /xyzprinting_nylon.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | Nylon 7 | Nature White 8 | 9 | 10 | 11 | 450beae3-730a-496c-af06-54c5e4506736 12 | This filament is ideal for users who desire a structural component with heat resistance, high strength and higher impact resistance. 13 | 14 | Applications： 15 | - Assembly testing 16 | - Functional prototyping 17 | - Tooling 18 | - End-use parts 19 | #ffffff 20 | 5 21 | 22 | 23 | 1.11 24 | 1.75 25 | 600 26 | 27 | 28 | 100.0 29 | 255.0 30 | 80 31 | 255 32 | 33 | 34 | -------------------------------------------------------------------------------- /xyzprinting_ppgf30.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PP 7 | Nature White 8 | 9 | 10 | 11 | 83db87f5-092a-8acd-38e0-9466ba51cd93 12 | PP is a semi-rigid and lightweight material. Its semi-crystalline structure causes 3D printed parts to warp easily when cooled. PP is tough and has good fatigue resistance, suitable for low-strength applications such as living hinges and belts. 13 | #ffffff 14 | 5 15 | 16 | 17 | 0.9 18 | 1.75 19 | 1000 20 | 21 | 22 | 100.0 23 | 240.0 24 | 90 25 | 240 26 | 27 | 28 | -------------------------------------------------------------------------------- /docker_env/make_docker.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | # 3 | # SPDX-License-Identifier: LGPL-3.0+ 4 | # 5 | # Copyright (C) 2019 Ultimaker B.V. 6 | # 7 | 8 | set -eu 9 | 10 | GIT_HASH="$(git rev-parse HEAD)" 11 | 12 | DOCKER_IMAGE_NAME="${1:-fdm-materials_${GIT_HASH}}" 13 | 14 | DOCKER_FILE_CHANGES=$(git diff docker_env/Dockerfile) 15 | 16 | if ! docker inspect --type=image "${DOCKER_IMAGE_NAME}" > /dev/null || [ -n "${DOCKER_FILE_CHANGES}" ]; then 17 | 18 | docker build --rm -f docker_env/Dockerfile -t "${DOCKER_IMAGE_NAME}" . 19 | 20 | if ! docker run --rm --privileged "${DOCKER_IMAGE_NAME}" "./buildenv_check.sh"; then 21 | echo "Something is wrong with the build environment, please check your Dockerfile." 22 | docker image rm "${DOCKER_IMAGE_NAME}" 23 | exit 1 24 | fi 25 | fi 26 | 27 | DOCKER_WORK_DIR="${WORKDIR:-/build}" 28 | PREFIX="/usr" 29 | 30 | run_in_docker() 31 | { 32 | echo "Running '${*}' in docker." 33 | docker run \ 34 | --rm \ 35 | --privileged \ 36 | -v "$(pwd):${DOCKER_WORK_DIR}" \ 37 | -e "PREFIX=${PREFIX}" \ 38 | -e "RELEASE_VERSION=${RELEASE_VERSION:-}" \ 39 | -w "${DOCKER_WORK_DIR}" \ 40 | "${DOCKER_IMAGE_NAME}" \ 41 | "${@}" 42 | } 43 | -------------------------------------------------------------------------------- /zyyx_pro_flex.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | ZYYX 6 | TPU 7 | Generic 8 | 9 | 10 | Use with ZYYX standard build plate 11 | Fast, safe and reliable printing. ZYYX proFlex is ideal for flexible parts or soft grip parts. 12 | 2 13 | #c0c0c0 14 | 182d2e1d-02cf-4208-b5e7-08607d0af2d8 15 | 16 | 17 | 1.2 18 | 1.75 19 | 20 | 21 | 230 22 | 0 23 | 200 24 | 100 25 | true 26 | 27 | 28 | -------------------------------------------------------------------------------- /xyzprinting_flexible.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | TPE 7 | White 8 | 9 | 10 | 11 | 08273a5e-2c8b-4a87-be39-9b5d1cb83c1f 12 | XYZprinting’s Thermoplastic Elastomer is a specially formulated filament that has elastic properties that provide flexible and durable prints. It is non-toxic and completely waterproof, making this a safe and resilient filament for all of your innovative projects. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.11 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 220.0 24 | 70 25 | 220 26 | 27 | 28 | -------------------------------------------------------------------------------- /volumic_pla_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PLA 7 | Generic 8 | 9 | 10 | 2 11 | 3f84ad4e-5fc8-4b1a-83d1-1c2636053e07 12 | The professional PLA. Very easy to print, excellent adhesion at low temperature, flexibility worthy of ABS, a very high quality material (industrial grade) and a perfect finish. 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.25 18 | 1.75 19 | 20 | 21 | 100.0 22 | 2.0 23 | 165.0 24 | 25.0 25 | 50.0 26 | 210.0 27 | 28 | 29 | -------------------------------------------------------------------------------- /volumic_support_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PVA 7 | Generic 8 | 9 | 10 | The Support Ultra is a modified PVA to increase bed adhesion and to other materials, much easier than a standard PVA. 11 | a14eeb2d-3faa-4892-ade6-c56bb34d38eb 12 | 2 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.22 18 | 1.75 19 | 20 | 21 | 25.0 22 | 0.0 23 | 2.0 24 | 175.0 25 | 0 26 | 65.0 27 | 245.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_abs_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | ABS 7 | Generic 8 | 9 | 10 | 6cc2db78-1538-43c8-964a-24a4f33119ce 11 | Professional ABS that doesn't warp! Much easier to print than standard ABS, low warping, very high quality material and excellent rendering. 12 | 2 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.05 18 | 1.75 19 | 20 | 21 | 30.0 22 | 30.0 23 | 1.2 24 | 175.0 25 | 0 26 | 75.0 27 | 235.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_nylon_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | Nylon 7 | Generic 8 | 9 | 10 | 2 11 | The must of nylons, easy to print, with very good adhesion and low warping. Very high quality material (industrial grade) and a very nice finish. 12 | 3DLac or Dimafix 13 | #00ff00 14 | 432b8465-48e2-4ef2-a02c-803250300a6e 15 | 16 | 17 | 1.24 18 | 1.75 19 | 20 | 21 | 0.0 22 | 0 23 | 2.0 24 | 175.0 25 | 25.0 26 | 65.0 27 | 238.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_petg_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PETG 7 | Generic 8 | 9 | 10 | 2 11 | 12bd6afe-0741-472f-970e-33ac4c3a6b15 12 | Professional PETG, very easy to print, very good adhesion at low temperature, very high quality material (industrial grade) and a very nice finish. 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.38 18 | 1.75 19 | 20 | 21 | 25.0 22 | 50.0 23 | 2.0 24 | 175.0 25 | 0 26 | 50.0 27 | 235.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /3D-Fuel_PLA_SnapSupport.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 3D-Fuel 6 | PLA 7 | Generic 8 | 9 | 10 | 3333145a-b9b0-4388-9c5c-e5dfab37e246 11 | #aaaa7f 12 | Breakaway Support Material 13 | 14 | 1 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 40.0 22 | 1.0 23 | 0 24 | 200.0 25 | 100 26 | 100.0 27 | 210.0 28 | 60.0 29 | 28 30 | 31 | 32 | -------------------------------------------------------------------------------- /volumic_petgcarbone_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PETG 7 | Generic 8 | 9 | 10 | 2 11 | Professional PETG loaded with carbon, very easy to print, increased strength and Tg with significant weight gain, the best technical PETG. 12 | 3DLac or Dimafix 13 | #00ff00 14 | 64569342-86c5-4bc2-90a7-e85af1acbb58 15 | 16 | 17 | 1.2 18 | 1.75 19 | 20 | 21 | 30.0 22 | 0 23 | 2.0 24 | 175.0 25 | 25.0 26 | 70.0 27 | 240.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_pekk_carbone.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PEKK 7 | Generic 8 | 9 | 10 | 2 11 | PEKK, easier to print than PEEK, and having similar characteristics. Please note, this material requires a good knowledge of 3D printing. 12 | 78b50ccb-12de-4119-8fb2-7b90a4c0fa46 13 | PEI/ULTEM bed sticker and Hardened steel nozzle 14 | #00ff00 15 | 16 | 17 | 1.32 18 | 1.75 19 | 20 | 21 | 0.0 22 | 0 23 | 2.0 24 | 260.0 25 | 15.0 26 | 135.0 27 | 340.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /volumic_pp_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | PP 7 | Generic 8 | 9 | 10 | 2 11 | Polypropylene ULTRA, with its exceptional properties, makes it a very versatile material for prototyping as well as for the functional part. 12 | e9b053a4-bb38-4ad5-be20-3fa8198c08be 13 | Best with PP adhesive or PP juice, or 3DLac/Dimafix 14 | #00ff00 15 | 16 | 17 | 0.9 18 | 1.75 19 | 20 | 21 | 50.0 22 | 0 23 | 1.2 24 | 175.0 25 | 25.0 26 | 90.0 27 | 230.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /fdplast_petg_gray.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | FDplast 6 | PETG 7 | Gray 8 | 9 | 10 | Hot bed is more or less a necessity! Expect slight warping on cold bed. Use blue tape with cold bed and a bare PEI sheet with hot bed. 11 | fdff3c20-1d38-4de5-89ee-81789ad8d682 12 | PETG is strong and chemically resistant. A great material for mechanical applications. It's more sticky, oozy, and moderately hydrophilic. You must keep it dry! 13 | #808080 14 | 5 15 | 16 | 17 | 1.27 18 | 1.75 19 | 1000 20 | 21 | 22 | 50.0 23 | 220.0 24 | 70 25 | 120 26 | 27 | 28 | -------------------------------------------------------------------------------- /xyzprinting_metallic_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PLA 7 | Copper 8 | 9 | 10 | 11 | 76309616-ac81-40e0-8c69-d6e2bc5394d9 12 | Made from a mixture of PLA (polylactic acid) and copper powder, our Premium Metallic PLA filament lets you print 3D models with a unique metallic finish and appearance. 13 | 14 | * All images shown are for illustrative purposes only and may differ from the actual product. The weight of the Premium Metallic PLA is 600g. 15 | #974c28 16 | 5 17 | 18 | 19 | 2.71 20 | 1.75 21 | 600 22 | 23 | 24 | 100.0 25 | 200.0 26 | 45 27 | 200 28 | 29 | 30 | -------------------------------------------------------------------------------- /bestfilament_petg_orange.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Best Filament 6 | PETG 7 | Orange 8 | 9 | 10 | Hot bed is more or less a necessity! Expect slight warping on cold bed. Use blue tape with cold bed and a bare PEI sheet with hot bed. 11 | 9fb18c5f-b707-47d4-b898-087e515beefa 12 | PETG is strong and chemically resistant. A great material for mechanical applications. It's more sticky, oozy, and moderately hydrophilic. You must keep it dry! 13 | #FFA500 14 | 5 15 | 16 | 17 | 1.27 18 | 1.75 19 | 1000 20 | 21 | 22 | 50.0 23 | 220.0 24 | 70 25 | 120 26 | 27 | 28 | -------------------------------------------------------------------------------- /volumic_arma_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | Nylon 7 | Generic 8 | 9 | 10 | 2 11 | The Armadillo Ultra is a Nylon-Kevlar (Aramid) filament, giving it unparalleled resistance to large impacts. Make your own custom bulletproof armor! Hardened steel nozzle and training compulsory. 12 | a0cf166b-0c06-4873-a2be-b46190edc25c 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.35 18 | 1.75 19 | 20 | 21 | 0.0 22 | 0 23 | 2.0 24 | 175.0 25 | 25.0 26 | 65.0 27 | 245.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /generic_cpe_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | CPE 10 | Generic 11 | 12 | da1872c1-b991-4795-80ad-bdac0f131726 13 | 6 14 | #159499 15 | Chemically resistant and tough. CPE is chemically inert, tough, dimensionally stable and handles temperatures up to 70ºC. 16 | Use glue. 17 | 18 | 19 | 1.27 20 | 1.75 21 | 22 | 23 | 240 24 | 175 25 | 70 26 | 37 27 | 0 28 | 70 29 | 30 | 31 | -------------------------------------------------------------------------------- /3D-Fuel_PLA_PRO_Black.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 3D-Fuel 6 | PLA 7 | Black 8 | 9 | 10 | #000000 11 | ca27d214-ea51-418e-a43f-7f82e319d814 12 | 13 | 1 14 | Pro PLA has higher impact strength than ABS and Standard PLA with a heat resistance rivaling that of ABS! 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 40.0 23 | 1.0 24 | 0 25 | 220.0 26 | 60.0 27 | 240.0 28 | 100 29 | 28 30 | 31 | 32 | -------------------------------------------------------------------------------- /volumic_strong_ultra.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Volumic 6 | Nylon 7 | Generic 8 | 9 | 10 | e266efca-37e9-4af8-bb04-a4c43877073a 11 | Strong Ultra is a nylon filled with fiberglass, giving it unparalleled resistance. Made with a unique anti-abrasive technology that drastically decreases abrasion making it much easier to print with reasonable nozzle / drag wear. Hardened steel nozzle and stainless steel drive compulsory. 12 | 2 13 | 3DLac or Dimafix 14 | #00ff00 15 | 16 | 17 | 1.35 18 | 1.75 19 | 20 | 21 | 25.0 22 | 0.0 23 | 2.0 24 | 175.0 25 | 0 26 | 75.0 27 | 245.0 28 | 29 | 30 | -------------------------------------------------------------------------------- /verbatim_bvoh_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Verbatim 6 | BVOH 7 | Generic 8 | 9 | 10 | c860a504-f47c-4c57-a251-1e2ecd79600a 11 | 3 12 | #a32bcc 13 | Water soluble support material. BVOH is a matching support material for PLA, CPE and PET. 14 | Use the same temperatures and adhesion method as your build material(s). 15 | 16 | 17 | 1.14 18 | 1.75 19 | 500 20 | 21 | 22 | 210 23 | 24 | 25 | 26 | 175 27 | 60 28 | 45 29 | 5 30 | 31 | 32 | 33 | -------------------------------------------------------------------------------- /eryone_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | PLA 7 | Generic 8 | 9 | 10 | 8 11 | 4cb53666-594b-452f-aba4-0e5a12b185d9 12 | #ff0000 13 | Eryone PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 60.0 23 | 100.0 24 | 195.0 25 | 6.5 26 | 45.0 27 | 175.0 28 | 29 | 30 | 0.3 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /eryone_pla_glow.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | PLA 7 | Generic 8 | 9 | 10 | 8 11 | 1573692f-472b-4d08-ab99-967a3ab514c0 12 | #00aa7f 13 | Eryone Glow PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.24 18 | 1.75 19 | 1000 20 | 21 | 22 | 60.0 23 | 100.0 24 | 205.0 25 | 3.5 26 | 35.0 27 | 175 28 | 29 | 30 | 0.25 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /eryone_pla_wood.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | PLA 7 | Generic 8 | 9 | 10 | 8 11 | #be8e5e 12 | 5fa210e0-4edd-4cfb-b2fa-897981444fe4 13 | Eryone Wood PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.75 18 | 1.24 19 | 1000 20 | 21 | 22 | 60.0 23 | 100.0 24 | 215.0 25 | 4.5 26 | 45.0 27 | 175.0 28 | 29 | 30 | 0.3 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /eryone_pla_matte.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | PLA 7 | Generic 8 | 9 | 10 | 1 11 | 03e828a2-7e43-4e83-8de0-2cd7ed9f2f7c 12 | #bfbfa7 13 | Eryone Matte PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.45 18 | 1.75 19 | 1000 20 | 21 | 22 | 60.0 23 | 100.0 24 | 205.0 25 | 3.5 26 | 45.0 27 | 175.0 28 | 29 | 30 | 0.2 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /generic_bvoh_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | BVOH 10 | Generic 11 | 12 | 923e604c-8432-4b09-96aa-9bbbd42207f4 13 | 2 14 | #ffaaff 15 | This is the baseline profile for the Water soluble support material BVOH. BVOH is a matching support material for PLA, ABS, ASA, PET-G, Nylon, TPU. 16 | Use the same temperatures and adhesion method as your build material(s). 17 | 18 | 19 | 1.14 20 | 1.75 21 | 22 | 23 | 24 | 25 | true 26 | 27 | 205 28 | 150 29 | 60 30 | 88 31 | 32 | 33 | -------------------------------------------------------------------------------- /generic_tpu_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | TPU 95A 10 | Generic 11 | 12 | 19baa6a9-94ff-478b-b4a1-8157b74358d2 13 | 12 14 | #B22744 15 | Wear and tear resistant. TPU features a Shore-A hardness of 95 and an elongation of up to 580% at break. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance. 16 | Use glue. 17 | 18 | 19 | 1.22 20 | 1.75 21 | 22 | 23 | 228 24 | 175 25 | 0 26 | 27 27 | 3 28 | 100 29 | true 30 | 31 | 32 | 33 | -------------------------------------------------------------------------------- /xyzprinting_carbon_fiber.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | Carbon Fiber 7 | Black 8 | 9 | 10 | 11 | 20d9036a-4bea-46a3-bfc2-9e147de5a543 12 | Made from a mixture of PLA (polylactic acid) and carbon fiber, our XYZ Carbon Fiber filament lets you print 3D models with better impact resistance and an exotic finish. 13 | #000000 14 | 5 15 | 16 | 17 | 1.20 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 215.0 24 | 45 25 | 215 26 | 27 | 28 | yes 29 | 30 | 205 31 | 45 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /eryone_tpu.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | TPU 7 | Generic 8 | 9 | 10 | 8 11 | ff52b30e-5740-4f70-a7b5-8c436fc9954f 12 | #0055ff 13 | Wear and tear resistant. Eryone TPU features a Shore hardness of 95A. Suitable for applications that require slight flexibility, wear and tear, and chemical resistance. 14 | Print on bare glass. Use tape for cold build plates. 15 | 16 | 17 | 1.75 18 | 1.22 19 | 500 20 | 21 | 22 | 50.0 23 | 100.0 24 | 235 25 | 6.0 26 | 40.0 27 | 175.0 28 | 29 | 30 | 0.35 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /eryone_petg.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Eryone 6 | PETG 7 | Generic 8 | 9 | 10 | 8 11 | 6fbaf274-d93a-4b84-8072-ac6af432bd4a 12 | #ff5500 13 | Eryone PETG is easily printable and a good all-round material. For anyone needing parts that require more chemical and heat resistance than PLA, this is an excellent material to use. 14 | Print on bare glass. Heated build plates is recommended. 15 | 16 | 17 | 1.75 18 | 1.27 19 | 1000 20 | 21 | 22 | 80.0 23 | 50.0 24 | 230.0 25 | 4.5 26 | 45.0 27 | 175 28 | 29 | 30 | 0.3 31 | 35.0 32 | 33 | 34 | 35 | -------------------------------------------------------------------------------- /generic_asa_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | ASA 10 | Generic 11 | 12 | 416eead4-0d8e-4f0b-8bfc-a91a519befa5 13 | 7 14 | #ffe92a 15 | ASA combines the qualities of ABS with the added benefit of UV resistance and additional moisture resistance making it ideal for equipment exposed to sunlight and rain over long periods of time – such as products for the agriculture, transportation, and power and utility industries. 16 | No glue needed 17 | 18 | 19 | 1.07 20 | 1.75 21 | 22 | 23 | 240 24 | 200 25 | 90 26 | 36 27 | 0 28 | yes 29 | 30 | 31 | 32 | -------------------------------------------------------------------------------- /xyzprinting_antibact_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PLA 7 | White 8 | 9 | 10 | 11 | ef6b0b09-06e7-4c57-a79c-dbf10cf0171d 12 | Designed with antibacterial properties, our Antibacterial PLA (polylactic acid) greatly reduces the spread of germs and infections. It’s a material ideal for bringing 3D printing into daily lives, households, and schools. 13 | #FFFFFF 14 | 5 15 | 16 | 17 | 1.25 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 210.0 24 | 45 25 | 210 26 | 27 | 28 | yes 29 | 30 | 190 31 | 45 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /xyzprinting_tough_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | Tough PLA 7 | Nature White 8 | 9 | 10 | 11 | 8a996944-7f7b-4e89-8af9-b9b8841c2471 12 | XYZprinting Tough PLA is a biocompostible consumable that has better toughness than ABS and has stronger impact resistance than PLA. This allows you to create durable, impact resistant tools, accessories, and parts that make your finished product more reliable. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.25 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 210.0 24 | 45 25 | 210 26 | 27 | 28 | yes 29 | 30 | 190 31 | 45 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /xyzprinting_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PLA 7 | Nature White 8 | 9 | 10 | 11 | 9e61f199-6a9c-44b8-91d2-d3ebfb17319f 12 | XYZprinting PLA (polylactic acid) filament produces quality prints with good strength and surface finish. Extracted from biocompostable materials, it’s a 3D printing filament that’s safe, reliable, and very easy to use. This makes it the go-to filament for both beginner and advanced users. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.25 18 | 1.75 19 | 600 20 | 21 | 22 | 100.0 23 | 210.0 24 | 45 25 | 210 26 | 27 | 28 | yes 29 | 30 | 190 31 | 45 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /conanfile.py: -------------------------------------------------------------------------------- 1 | import os 2 | 3 | from conan import ConanFile 4 | from conan.tools.files import copy, update_conandata 5 | 6 | required_conan_version = ">=2.7.0" 7 | 8 | 9 | class FDM_MaterialsConan(ConanFile): 10 | name = "fdm_materials" 11 | license = "LGPL-3.0" 12 | author = "Ultimaker B.V." 13 | url = "https://github.com/Ultimaker/fdm_materials" 14 | description = "FDM Material database" 15 | topics = ("conan", "profiles", "cura", "ultimaker", "filament") 16 | build_policy = "missing" 17 | exports = "LICENSE*" 18 | settings = "os", "compiler", "build_type", "arch" 19 | no_copy_source = True 20 | 21 | def set_version(self): 22 | if not self.version: 23 | self.version = self.conan_data["version"] 24 | 25 | def export(self): 26 | update_conandata(self, {"version": self.version}) 27 | 28 | def export_sources(self): 29 | copy(self, "*.fdm_material", self.recipe_folder, self.export_sources_folder) 30 | copy(self, "*.sig", self.recipe_folder, self.export_sources_folder) 31 | 32 | def package(self): 33 | copy(self, "*.fdm_material", self.source_folder, os.path.join(self.package_folder, "res", "resources", "materials"), keep_path = False) 34 | copy(self, "*.sig", self.source_folder, os.path.join(self.package_folder, "res", "resources", "materials"), keep_path = False) 35 | 36 | def package_info(self): 37 | self.cpp_info.includedirs = [] 38 | self.cpp_info.resdirs = ["res"] 39 | self.runenv_info.append_path("CURA_RESOURCES", os.path.join(self.package_folder, "res", "resources")) 40 | 41 | def package_id(self): 42 | self.info.clear() 43 | # 44 | -------------------------------------------------------------------------------- /leapfrog_pva_natural.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Leapfrog 6 | PVA 7 | Natural 8 | 9 | Water soluble support material. PVA is a matching support material for PLA, EPLA and Nylon. 10 | 570022e7-e038-40f0-af85-98f204cc558d 11 | 4 12 | Use the same temperatures and adhesion method as your build material(s). 13 | https://www.lpfrg.com/products/scaffold-filament/ 14 | #737577 15 | 16 | 17 | 1.19 18 | 1.75 19 | 20 | 21 | 45.0 22 | 215 23 | 215 24 | 100 25 | 26 | 27 | 28 | 29 | yes 30 | 31 | 32 | yes 33 | 34 | 35 | 36 | 37 | -------------------------------------------------------------------------------- /layer_one_white_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Layer One 6 | PLA 7 | White 8 | 9 | 10 | 11 | 1 12 | af740bcf-6e7e-457d-a3bb-534699b3378a 13 | #ffffff 14 | Simple, fast and reliable option for day to day printing. Not very heat resistant (40°C), medium strength and low toughness but good surface finish. 15 | Use heated bed or blue tape to increase adheasion. 16 | https://atom3dp.squarespace.com/filament-en 17 | 18 | Layer One 19 | Daniel Kurth 20 | software@kurth.online 21 | 22 | 23 | 24 | 25 | 1.75 26 | 1.18 27 | 1000 28 | 29 | 30 | 31 | 200.0 32 | 60.0 33 | 100.0 34 | 180.0 35 | 36 | 37 | 38 | yes 39 | 40 | 41 | 42 | yes 43 | 44 | 45 | 46 | 47 | -------------------------------------------------------------------------------- /layer_one_black_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Layer One 6 | PLA 7 | Black 8 | 9 | 10 | 11 | 1 12 | 80b4b88f-85ee-4f2a-a48b-fd7a5dccb604 13 | #141414 14 | Simple, fast and reliable option for day to day printing. Not very heat resistant (40°C), medium strength and low toughness but good surface finish. 15 | Use heated bed or blue tape to increase adheasion. 16 | https://atom3dp.squarespace.com/filament-en 17 | 18 | Layer One 19 | Daniel Kurth 20 | software@kurth.online 21 | 22 | 23 | 24 | 25 | 1.75 26 | 1.18 27 | 1000 28 | 29 | 30 | 31 | 200.0 32 | 60.0 33 | 100.0 34 | 180.0 35 | 36 | 37 | 38 | yes 39 | 40 | 41 | 42 | 43 | yes 44 | 45 | 46 | 47 | 48 | -------------------------------------------------------------------------------- /leapfrog_abs_natural.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Leapfrog 6 | ABS 7 | Natural 8 | 9 | Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 100ºC. 10 | 0e720dc6-45c4-4f6e-aa55-86d632005fe5 11 | 3 12 | ABS can be printed on a BuildTak sticker. Make sure the sticker is clean and free of debris. DO NOT use heavy duty solvents, such as acetone, to clean it, nothing stronger than rubbing alcohol. 13 | https://www.lpfrg.com/products/abs-filament/ 14 | #E9E6E6 15 | 16 | 17 | 1.04 18 | 1.75 19 | 20 | 21 | 90.0 22 | 230 23 | 230 24 | 100 25 | 26 | 27 | 28 | yes 29 | 30 | 31 | yes 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /layer_one_dark_gray_pla.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Layer One 6 | PLA 7 | Dark Grey 8 | 9 | 10 | 11 | 1 12 | f509bb68-ee78-4947-a3db-9d097522089c 13 | #969696 14 | Simple, fast and reliable option for day to day printing. Not very heat resistant (40°C), medium strength and low toughness but good surface finish. 15 | Use heated bed or blue tape to increase adheasion. 16 | https://atom3dp.squarespace.com/filament-en 17 | 18 | Layer One 19 | Daniel Kurth 20 | software@kurth.online 21 | 22 | 23 | 24 | 25 | 1.75 26 | 1.18 27 | 1000 28 | 29 | 30 | 31 | 200.0 32 | 60.0 33 | 100.0 34 | 180.0 35 | 36 | 37 | 38 | yes 39 | 40 | 41 | 42 | 43 | yes 44 | 45 | 46 | 47 | 48 | -------------------------------------------------------------------------------- /leapfrog_epla_natural.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Leapfrog 6 | EPLA 7 | Natural 8 | 9 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 10 | 98d4d76c-3b31-46be-979b-72166fce5938 11 | 3 12 | EPLA can be printed on a BuildTak sticker. Make sure the sticker is clean and free of debris. DO NOT use heavy duty solvents, such as acetone, to clean it, nothing stronger than rubbing alcohol. 13 | https://www.lpfrg.com/products/engineering-pla-filament 14 | #E9E6E6 15 | 16 | 17 | 1.24 18 | 1.75 19 | 20 | 21 | 40.0 22 | 210 23 | 210 24 | 100 25 | 26 | 27 | 28 | yes 29 | 30 | 31 | yes 32 | 33 | 34 | 35 | 36 | -------------------------------------------------------------------------------- /xyzprinting_petg.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | PETG 7 | Nature White 8 | 9 | 10 | 11 | 17668dfb-eb1c-46a5-a513-bdb7c06959p3 12 | XYZprinting's PETG filament is a versatile material with high transparency and high impact resistance. It's easy to print with, tough, warp resistant, and recyclable. 13 | 14 | * PETG cannot be used with 0.3 mm nozzles on Jr. Series printers. 15 | #FFFFFF 16 | 5 17 | 18 | 19 | 1.28 20 | 1.75 21 | 600 22 | 23 | 24 | 100.0 25 | 220.0 26 | 45 27 | 220 28 | 29 | 30 | yes 31 | 32 | 220.0 33 | 60 34 | 35 | 36 | 37 | 38 | yes 39 | 40 | 235 41 | 45 42 | 43 | 44 | 45 | 46 | -------------------------------------------------------------------------------- /dsm_arnitel2045_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | DSM 6 | TPC 7 | Generic 8 | 9 | 10 | fc67dfa2-7f71-4ca8-8ba5-dfe802fda22c 11 | 2 12 | #ee51f8 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 215 20 | 50 21 | 160 22 | 23 | 24 | 25 | 40.0 26 | 160 27 | 20 28 | 50 29 | 215 30 | 31 | yes 32 | 1.0 33 | 34 | 35 | yes 36 | 1.0 37 | 38 | 39 | yes 40 | 1.5 41 | 42 | 43 | 44 | 45 | -------------------------------------------------------------------------------- /dsm_novamid1070_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | DSM 6 | PA copolymer 7 | Generic 8 | 9 | 10 | edcde954-ee11-4a23-9f11-56d2aa03284b 11 | 2 12 | #f395f9 13 | 14 | 15 | 1.10 16 | 1.75 17 | 18 | 19 | 255 20 | 75 21 | 220 22 | 23 | 24 | 25 | 0.0 26 | 220 27 | 20 28 | 75 29 | 255 30 | 31 | yes 32 | 1.0 33 | 34 | 35 | yes 36 | 1.0 37 | 38 | 39 | yes 40 | 1.5 41 | 42 | 43 | 44 | 45 | -------------------------------------------------------------------------------- /xyzprinting_abs.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | XYZprinting 6 | ABS 7 | White 8 | 9 | 10 | 11 | f1912a12-0129-46e0-b55f-f168950ce08e 12 | XYZprinting produces high quality, long lasting, ABS filaments that offer better impact resistance making it suitable for external components or model parts. Additionally, you can easily use common modeling tools to decorate, assemble or connect different parts to create your next big project. 13 | #ffffff 14 | 5 15 | 16 | 17 | 1.02 18 | 1.75 19 | 600 20 | 21 | 22 | 100 23 | 240 24 | 90 25 | 240 26 | 27 | 28 | 29 | yes 30 | 31 | 240 32 | 70 33 | 34 | 35 | 36 | 37 | yes 38 | 39 | 210 40 | 90 41 | 42 | 43 | 44 | 45 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Black_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Black 8 | 9 | 10 | 1 11 | a0a33de4-44ca-406e-bd38-edb371f40c8f 12 | #000000 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Blue_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Blue RAL 5003 8 | 9 | 10 | 1 11 | cb8232aa-f33b-4aa0-930d-4d7506c0d4e7 12 | #193058 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% Layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Red_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Red RAL 3001 8 | 9 | 10 | 1 11 | 20e170ef-764b-4873-8c70-b88da09e9906 12 | #a02128 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% Layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_White_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | White RAL 9003 8 | 9 | 10 | 1 11 | 3fe941d9-1ef9-4a3f-bd87-7e0f16fc1bdd 12 | #f8f9fb 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% Layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Anthracite_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Antracite 8 | 9 | 10 | 1 11 | b84f6f15-4a92-4896-8d8e-7e83c8c91fd2 12 | #363d43 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, Max 50% layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Nature_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Nature RAL 1013 8 | 9 | 10 | 1 11 | 6f71f502-5ee7-4b56-8970-87eb1aa0897d 12 | #e9e5ce 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% Layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /Extrudr_GreenTECPro_Silver_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Extrudr 6 | GreenTEC Pro 7 | Silver RAL 9006 8 | 9 | 10 | 1 11 | 2797961b-46c6-4bbd-9636-b38701cb1a3e 12 | #A3A8AC 13 | GreenTEC Pro from the BIO-Performance series by Extrudr was specially developed for high-performance applications. The material is characterized by good flexural strength and low warping as well as the high-quality surface. In addition, it remains dimensionally stable at temperatures of up to 160 ° C. 14 | Manufacturer recommendation: Nozzle 210-230°C, bed 20-90°C, speed 40-60mm/s, cooling 30-80%, max 50% Layer height. 15 | 16 | 17 | 18 | 1.35 19 | 1.75 20 | 750 21 | 22 | 23 | 220.0 24 | 60 25 | 175 26 | 50 27 | 0 28 | 100 29 | 28 30 | 45 31 | 5 32 | 33 | 34 | 35 | 210.0 36 | 40 37 | 5.5 38 | 39 | 40 | 41 | -------------------------------------------------------------------------------- /generic_hips_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | HIPS 10 | Generic 11 | 12 | a468d86a-220c-47eb-99a5-bbb47e514eb0 13 | 5 14 | #12f3e0 15 | Support material. 16 | Use the same temperatures and adhesion method as your build material(s). 17 | 18 | 19 | 1.24 20 | 1.75 21 | 22 | 23 | 24 | 215 25 | 160 26 | 60 27 | 28 | 29 | true 30 | 31 | 32 | 33 | 0.0 34 | 160 35 | 40 36 | 85 37 | 225 38 | 39 | yes 40 | 1.0 41 | 42 | 43 | yes 44 | 1.0 45 | 46 | 47 | yes 48 | 1.5 49 | 50 | 51 | 52 | 53 | 54 | -------------------------------------------------------------------------------- /tizyx_pva.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | TiZYX 6 | PVA 7 | Generic 8 | 9 | 10 | 3 11 | #aa00ff 12 | Easily peeled off with a flexible build plate. 13 | 89df7af9-5c23-4c82-a4ee-e4749bed47f8 14 | 15 | 16 | 1.24 17 | 1.75 18 | 19 | 20 | 60 21 | 210.0 22 | 210.0 23 | 4.0 24 | 30.0 25 | 26 | 27 | 50 28 | 185 29 | 40.0 30 | 160 31 | 1.0 32 | 40 33 | 34 | yes 35 | 1.5 36 | 37 | 38 | yes 39 | 40 | 41 | yes 42 | 43 | 44 | 45 | 46 | 55 47 | 175 48 | 1.0 49 | 10.0 50 | 51 | yes 52 | 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /tizyx_pla_bois.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | TiZYX 6 | PLA Bois 7 | bois 8 | 9 | 10 | 3 11 | #ac7300 12 | 60e6c0e4-b22f-42d7-9807-aef7f0c6fee7 13 | Easily peeled off with a flexible build plate. 14 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 50.0 22 | 200 23 | 200.0 24 | 60 25 | 5 26 | 27 | 28 | 50 29 | 185 30 | 160 31 | 40.0 32 | 40 33 | 34 | yes 35 | 36 | 37 | yes 38 | 39 | 40 | yes 41 | 1.5 42 | 43 | 44 | 45 | 46 | 55 47 | 210 48 | 175 49 | 50 | yes 51 | 52 | 53 | 54 | 55 | -------------------------------------------------------------------------------- /structur3d_dap100silicone.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Structur3d 6 | Silicone 7 | Clear 8 | 9 | 10 | Print on wax paper. Use tape to affix wax paper to bed. 11 | #057ec7 12 | 13 13 | 9bce7bd3-53fd-467a-8b92-0d70720683d9 14 | Safe and reliable silicone printing. DAP 100% Silicone is ideal for the printing of parts and prototypes with flexibility, compressibility, as well as chemical and temperature resistance. Cure time is several minutes to hours. 15 | 16 | 17 | 3.175 18 | 1 19 | 20 | 21 | 0 22 | 0.0 23 | 100 24 | 0.0 25 | 0.0 26 | 0.0 27 | 0.0 28 | no 29 | 30 | 31 | yes 32 | 33 | yes 34 | 35 | 36 | yes 37 | 38 | 39 | yes 40 | 41 | 42 | yes 43 | 44 | 45 | yes 46 | 47 | 48 | yes 49 | 50 | 51 | yes 52 | 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /generic_pva_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | PVA 10 | Generic 11 | 12 | a4255da2-cb2a-4042-be49-4a83957a2f9a 13 | 11 14 | #a32bcc 15 | Water soluble support material. PVA is a matching support material for PLA, CPE and Nylon. 16 | Use the same temperatures and adhesion method as your build material(s). 17 | 18 | 19 | 1.23 20 | 1.75 21 | 22 | 23 | 24 | 215 25 | 175 26 | true 27 | 28 | 29 | True 30 | 31 | 32 | 33 | 0.0 34 | 160 35 | 40 36 | 50 37 | 205 38 | 39 | yes 40 | 1.0 41 | 42 | 43 | yes 44 | 1.0 45 | 46 | 47 | yes 48 | 1.5 49 | 50 | 51 | 52 | 53 | 54 | -------------------------------------------------------------------------------- /tizyx_petg.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | TiZYX 6 | PETG 7 | Generic 8 | 9 | 10 | #00ff00 11 | 3 12 | a37db29f-c289-4e44-817a-52b1f016e898 13 | Easily peeled off with a flexible build plate. 14 | 15 | 16 | 17 | 1.27 18 | 1.75 19 | 20 | 21 | 235.0 22 | 70.0 23 | 235.0 24 | 5 25 | 50 26 | 27 | 28 | 210 29 | 55 30 | 175 31 | 1.0 32 | 10.0 33 | 34 | yes 35 | 36 | 37 | 38 | 39 | 185 40 | 50 41 | 160 42 | 1.0 43 | 40.0 44 | 40 45 | 46 | yes 47 | 1.5 48 | 49 | 50 | yes 51 | 52 | 53 | yes 54 | 55 | 56 | 57 | 58 | -------------------------------------------------------------------------------- /generic_hips.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | HIPS 10 | Generic 11 | 12 | b6f76172-bb0f-4326-bdbc-ee8f0e84b283 13 | 14 14 | #12f3e0 15 | Support material. 16 | Use the same temperatures and adhesion method as your build material(s). 17 | False 18 | False 19 | 20 | 21 | 1.24 22 | 2.85 23 | 24 | 25 | 26 | -8 27 | 25 28 | 0 29 | 2 30 | 250 31 | -20 32 | 25 33 | 145 34 | 7200 35 | 0.95 36 | 0.5 37 | 0.5 38 | 60 39 | 20 40 | 41 | 42 | 225 43 | 125 44 | 85 45 | 46 | 47 | 1.0 48 | 0 49 | 50 | 51 | true 52 | 53 | 54 | 55 | -------------------------------------------------------------------------------- /imade3d_pla_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | IMADE3D 9 | PLA 10 | Generic 11 | 12 | e7cda2de-0ad6-441e-9340-6d408c98def2 13 | 3 14 | #a5da00 15 | PLA is ideal for fast and reliable printing. 16 | Use blue tape with cold bed and a bare PEI sheet with hot bed. 17 | 18 | 19 | 1.24 20 | 1.75 21 | 22 | 23 | 210 24 | 55 25 | 175 26 | 0 27 | 100 28 | 29 | 30 | 31 | 32 | yes 33 | 1.3 34 | 40 35 | 95 36 | 100 37 | 80 38 | 39 | 40 | 41 | 42 | 43 | 44 | yes 45 | 1.3 46 | 40 47 | 95 48 | 100 49 | 80 50 | 51 | 52 | 53 | 54 | 55 | -------------------------------------------------------------------------------- /tizyx_abs.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | TiZYX 6 | ABS 7 | Generic 8 | 9 | 10 | 4 11 | #0097e8 12 | ae03b4fd-2aa6-4957-aaea-b7ca0bbf0370 13 | Use glue, to avoid chipping of the glass. 14 | Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC. 15 | 16 | 17 | 1.75 18 | 1.10 19 | 20 | 21 | 235.0 22 | 200 23 | 10.0 24 | 95.0 25 | 45 26 | 3 27 | 50 28 | 29 | 30 | 90 31 | 230 32 | 160 33 | 0.0 34 | 40 35 | 4.0 36 | 37 | yes 38 | 1.0 39 | 40 | 41 | yes 42 | 1.0 43 | 44 | 45 | yes 46 | 1.5 47 | 48 | 49 | 50 | 51 | -------------------------------------------------------------------------------- /generic_pc_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | PC 10 | Generic 11 | 12 | 62414577-94d1-490d-b1e4-7ef3ec40db02 13 | 7 14 | #F29030 15 | Strong, tough and temperature resistant. PC offers a great print quality, heat resistance up to 110ºC, mechanical strength and toughness. 16 | Use glue for small prints. An adhesion sheet is recommended for larger prints. Set your print speed to a low value (10mm/sec) to get better layer bonding. 17 | 18 | 19 | 1.19 20 | 1.75 21 | 22 | 23 | 270 24 | 175 25 | 107 26 | 41 27 | 0 28 | 29 | 30 | 31 | 0.0 32 | 160 33 | 40 34 | 135 35 | 245 36 | 37 | yes 38 | 1.0 39 | 40 | 41 | yes 42 | 1.0 43 | 44 | 45 | yes 46 | 1.5 47 | 48 | 49 | 50 | 51 | 52 | -------------------------------------------------------------------------------- /tizyx_flex.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | TiZYX 6 | FLEX 7 | Generic 8 | 9 | 10 | f42acc2b-f5b0-467c-8fb5-bd02005dc586 11 | Easily peeled off with a flexible build plate. 12 | Fast, safe and reliable printing. PLA is ideal for the fast and reliable printing of parts and prototypes with a great surface quality. 13 | #FF55FF 14 | 3 15 | 16 | 17 | 1.75 18 | 1.24 19 | 20 | 21 | 4 22 | 210.0 23 | 30 24 | 210.0 25 | 60 26 | 27 | 28 | 1.0 29 | 185 30 | 40.0 31 | 40 32 | 160 33 | 50 34 | 35 | yes 36 | 37 | 38 | yes 39 | 1.5 40 | 41 | 42 | yes 43 | 44 | 45 | 46 | 47 | 1.0 48 | 10.0 49 | 175 50 | 55 51 | 52 | yes 53 | 54 | 55 | 56 | 57 | -------------------------------------------------------------------------------- /emotiontech_nylon_1030.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eMotionTech 6 | Nylon 7 | Generic 8 | 9 | 10 | cb7cbe23-bb0b-4d54-95e0-340aaac4541f 11 | 14 12 | #27292b 13 | 14 | 15 | 16 | 17 | 1.12 18 | 1.75 19 | 1000 20 | 21 | 22 | 250 23 | 100 24 | 150 25 | 2 26 | 35 27 | 28 | 29 | 30 | yes 31 | 240 32 | 1.9 33 | 34 | 35 | yes 36 | 245 37 | 2.0 38 | 39 | 40 | yes 41 | 250 42 | 2.1 43 | 44 | 45 | yes 46 | 255 47 | 2.2 48 | 49 | 50 | yes 51 | 260 52 | 2.3 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /emotiontech_nylon_1070.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eMotionTech 6 | Nylon 7 | Generic 8 | 9 | 10 | e8ec7612-b626-4861-af93-56549c209bad 11 | 14 12 | #27292b 13 | 14 | 15 | 16 | 17 | 1.12 18 | 1.75 19 | 1000 20 | 21 | 22 | 260 23 | 100 24 | 150 25 | 2 26 | 35 27 | 28 | 29 | 30 | yes 31 | 250 32 | 2.1 33 | 34 | 35 | yes 36 | 255 37 | 2.3 38 | 39 | 40 | yes 41 | 260 42 | 2.3 43 | 44 | 45 | yes 46 | 265 47 | 2.7 48 | 49 | 50 | yes 51 | 270 52 | 2.7 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /emotiontech_nylon_1030cf.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | eMotionTech 6 | Nylon 7 | Generic 8 | 9 | 10 | 744e712a-d4b7-4617-9a5d-9e7221c3a295 11 | 14 12 | #27292b 13 | 14 | 15 | 16 | 17 | 1.12 18 | 1.75 19 | 1000 20 | 21 | 22 | 265 23 | 100 24 | 150 25 | 1.5 26 | 35 27 | 28 | 29 | 30 | yes 31 | 255 32 | 1.4 33 | 34 | 35 | yes 36 | 260 37 | 1.5 38 | 39 | 40 | yes 41 | 265 42 | 1.6 43 | 44 | 45 | yes 46 | 270 47 | 1.7 48 | 49 | 50 | yes 51 | 275 52 | 1.8 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /generic_nylon_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | Generic 9 | Nylon 10 | Generic 11 | 12 | 283d439a-3490-4481-920c-c51d8cdecf9c 13 | 8 14 | #3DF266 15 | Nylon is strong, abrasion-resistant, durable and engineered for low moisture sensitivity. 16 | Use glue. 17 | 18 | 19 | 1.14 20 | 1.75 21 | 22 | 23 | 245 24 | 175 25 | 60 26 | 35 27 | 8 28 | 25 29 | 2 30 | 100 31 | true 32 | 33 | 34 | 35 | 0.0 36 | 160 37 | 40 38 | 60 39 | 230 40 | 41 | yes 42 | 1.0 43 | 44 | 45 | yes 46 | 1.0 47 | 48 | 49 | yes 50 | 1.5 51 | 52 | 53 | 54 | 55 | 56 | -------------------------------------------------------------------------------- /ultimaker_metallic_pla_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | Ultimaker 6 | Metallic PLA 7 | Generic 8 | 9 | 3fac1543-dd0c-462d-9cbc-d94137d43999 10 | metallic-pla 11 | 3 12 | #80643f 13 | Fast, safe and reliable printing. Metallic PLA is ideal for the fast and reliable printing of parts and prototypes with a shiny surface quality. 14 | Print directly on a clean build surface. 15 | 16 | 17 | 1.24 18 | 1.75 19 | 750 20 | 21 | 22 | 230 23 | 55 24 | 100 25 | 0 26 | 100 27 | 28 | 29 | 30 | 31 | 230 32 | 100 33 | 34 | yes 35 | 36 | 37 | 38 | 39 | 230 40 | 180 41 | 100 42 | 55 43 | 60 44 | 220 45 | 235 46 | 47 | yes 48 | 49 | 50 | 51 | 52 | 53 | -------------------------------------------------------------------------------- /imade3d_petg_175.xml.fdm_material: -------------------------------------------------------------------------------- 1 | 2 | 5 | 6 | 7 | 8 | IMADE3D 9 | PETG 10 | Generic 11 | 12 | 255d0c5b-25c8-46ff-ad71-6d389790f50a 13 | 2 14 | #eb006a 15 | PETG is strong and chemically resistant. A great material for mechanical applications. It's more sticky, oozy, and moderately hydrophilic. You must keep it dry! 16 | Hot bed is more or less a necessity! Expect slight warping on cold bed. Use blue tape with cold bed and a bare PEI sheet with hot bed. 17 | 18 | 19 | 1.38 20 | 1.75 21 | 22 | 23 | 230 24 | 65 25 | 120 26 | 27 | 28 | 29 | 30 | yes 31 | 1.7 32 | 40 33 | 95 34 | 50 35 | 30 36 | 37 | 38 | 39 | 40 | 41 | yes 42 | 1.7 43 | 40 44 | 95 45 | 50 46 | 30 47 | 48 | 49 | 50 | 51 | 52 | 70 53 | 54 | 55 | 56 | --------------------------------------------------------------------------------