├── Images ├── front.png ├── rear.png ├── circuit.png ├── nanite-pic1.jpg ├── nanite-pic2.jpg └── nanite-pic3.jpg ├── Nanite841 ├── Nanite-841.jpg ├── Nanite-841_circuit.PNG ├── Firmware │ ├── Nanite841 │ │ ├── Makefile.inc │ │ └── bootloaderconfig.h │ └── Nanite841_bootloader.hex └── Nanite 841 - Minib v1.0.brd ├── .gitignore ├── Software ├── NaniteExamples.c ├── NaniteLib.c └── Nanite.h ├── README.md ├── Eagle ├── bom.txt └── Nanite 85 micro-b v1.0.brd └── LICENSE /Images/front.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/front.png -------------------------------------------------------------------------------- /Images/rear.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/rear.png -------------------------------------------------------------------------------- /Images/circuit.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/circuit.png -------------------------------------------------------------------------------- /Images/nanite-pic1.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/nanite-pic1.jpg -------------------------------------------------------------------------------- /Images/nanite-pic2.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/nanite-pic2.jpg -------------------------------------------------------------------------------- /Images/nanite-pic3.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Images/nanite-pic3.jpg -------------------------------------------------------------------------------- /Nanite841/Nanite-841.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Nanite841/Nanite-841.jpg -------------------------------------------------------------------------------- /Nanite841/Nanite-841_circuit.PNG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/cpldcpu/Nanite/HEAD/Nanite841/Nanite-841_circuit.PNG -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Object files 2 | *.o 3 | *.ko 4 | 5 | # Libraries 6 | *.lib 7 | *.a 8 | 9 | # Shared objects (inc. Windows DLLs) 10 | *.dll 11 | *.so 12 | *.so.* 13 | *.dylib 14 | 15 | # Executables 16 | *.exe 17 | *.out 18 | *.app 19 | -------------------------------------------------------------------------------- /Software/NaniteExamples.c: -------------------------------------------------------------------------------- 1 | /* 2 | * NaniteExamples.c 3 | * 4 | * Created: 27.10.2013 13:43:04 5 | * Author: tim 6 | */ 7 | 8 | 9 | #include "Nanite.h" 10 | #include 11 | #include 12 | #include 13 | 14 | 15 | int main(void) 16 | { 17 | uint8_t blink=0; 18 | 19 | nanite_init(); // Initialize nanite pin 20 | nanite_init_stdout(); 21 | 22 | while(1) 23 | { 24 | 25 | printf("test %i\n",blink); 26 | 27 | nanite_poll(); // poll reset button and update LED 28 | 29 | blink^=1; 30 | _delay_ms(500); 31 | //TODO:: Please write your application code 32 | } 33 | } -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | Nanite 85 2 | ====== 3 | 4 | The Nanite 85, a nano-sized ATtiny85 devboard with USB Bootloader - most likely the smallest one ever. 5 | 6 | The repository holds the Eagle circuit, PCB design data and a software example to handle the soft reset-button. 7 | 8 | See [Blog post](http://cpldcpu.wordpress.com/2014/04/25/the-nanite-85/) for more information. 9 | 10 | New 11 | === 12 | 13 | I teamed up with [Watterott](http://www.watterott.com) on making the Nanite 85 available for everyone. You can get one [here](http://www.watterott.com/de/Wattuino-Nanite85). Note that changes had to be made for manufacturability. 14 | 15 | 16 | ![The Nanite 85](Images/nanite-pic1.jpg) 17 | -------------------------------------------------------------------------------- /Software/NaniteLib.c: -------------------------------------------------------------------------------- 1 | /* 2 | * NaniteLib.c 3 | * 4 | * Created: 09.11.2013 07:15:26 5 | * Author: tim 6 | */ 7 | 8 | #include "Nanite.h" 9 | 10 | int nanite_putchar(char c, FILE *stream) 11 | { 12 | if (c == '\n') nanite_sendbyte('\r'); 13 | nanite_sendbyte(c); 14 | 15 | return 0; 16 | } 17 | 18 | 19 | void nanite_sendbyte(char data) 20 | { 21 | uint8_t i; 22 | 23 | NANITE_DDR |=_BV(NANITE_PIN); // 0 24 | _delay_us(1000000/NANITE_BAUD); 25 | 26 | for (i=0; i<8; i++) 27 | { 28 | if (data&1) 29 | NANITE_DDR &=~_BV(NANITE_PIN); // 1 30 | else 31 | NANITE_DDR |=_BV(NANITE_PIN); // 0 32 | data>>=1; 33 | _delay_us(1000000/NANITE_BAUD); 34 | } 35 | 36 | NANITE_DDR &=~_BV(NANITE_PIN); // 1 37 | _delay_us(1000000/NANITE_BAUD); 38 | } 39 | -------------------------------------------------------------------------------- /Eagle/bom.txt: -------------------------------------------------------------------------------- 1 | Part Value Device Package 2 | C1 100n CAP0805 0805 3 | D1 3.6V DIODE-ZENER-BZT52 SOD-323 4 | D2 3.6V DIODE-ZENER-BZT52 SOD-323 5 | JP1 HEADER-1X4ROUND 1X04_ROUND 6 | JP2 HEADER-1X4ROUND 1X04_ROUND 7 | JP4 USB-MICROB-HOLE USB-MICROB-HOLE USB-MICROB-HOLES 8 | LED1 LEDCHIPLED_0805 CHIPLED_0805 9 | R1 68 RESISTOR0805-RES 0805 10 | R2 68 RESISTOR0805-RES 0805 11 | R3 1k5 RESISTOR0805-RES 0805 12 | R4 390 RESISTOR0805-RES 0805 13 | S1 SWITCH-MOMENTARY-2-SMD-1101NE SWITCH-MOMENTARY-2-SMD-1101NE TACTILE-SWITCH-1101NE 14 | U6 ATTINY85-SSU ATTINY45TINY85-20-SMT SOIC08 15 | 16 | Notes: 17 | - This is not an easy soldering project! Recommended order is: 1) Rear side 2) Front side 3) Headears 18 | - The USB micro-b socket is a version that come with two alignment pins. It also works without, but is less mechanically stable. 19 | - The tolerances for mounting of the processor are very tight. Make sure it is aligned properly or you will not be able to install the headers. 20 | -------------------------------------------------------------------------------- /Software/Nanite.h: -------------------------------------------------------------------------------- 1 | /* 2 | * Nanite.h 3 | * 4 | * Created: 27.10.2013 13:43:26 5 | * Author: tim , cpldcpu@gmail.com 6 | */ 7 | 8 | 9 | #ifndef NANITE_H_ 10 | #define NANITE_H_ 11 | 12 | #include 13 | #include 14 | #include 15 | #include 16 | 17 | /* 18 | This is usually PB5 19 | */ 20 | 21 | #define NANITE_PORT PORTB 22 | #define NANITE_DDR DDRB 23 | #define NANITE_INP PINB 24 | #define NANITE_PIN PB5 25 | 26 | /* 27 | * serial output 28 | */ 29 | 30 | #define NANITE_BAUD 9600 31 | 32 | void nanite_sendbyte(char); 33 | extern int nanite_putchar(char c, FILE *stream); 34 | 35 | #define nanite_init_stdout() { \ 36 | static FILE nanite_stdout = FDEV_SETUP_STREAM(nanite_putchar, NULL, _FDEV_SETUP_WRITE); \ 37 | stdout = &nanite_stdout; \ 38 | } 39 | 40 | /* 41 | nanite_init 42 | 43 | input: none 44 | output: none 45 | 46 | Initialize pin and turn LED off 47 | */ 48 | 49 | #define nanite_init() { \ 50 | NANITE_PORT &=~_BV(NANITE_PIN); \ 51 | NANITE_DDR &=~_BV(NANITE_PIN); \ 52 | } 53 | 54 | /* 55 | nanite_poll 56 | 57 | input: none 58 | output: none 59 | 60 | nanite_poll_led 61 | 62 | input: boolean to turn the LED on or off 63 | output: none 64 | 65 | Reads the state of the reset switch. Uses the watch dog timer to issue a reset when the button is pressed. 66 | */ 67 | 68 | #define nanite_poll_led(ledon) { \ 69 | NANITE_DDR &=~_BV(NANITE_PIN); \ 70 | _delay_us(5); \ 71 | if (!(NANITE_INP & _BV(NANITE_PIN))) wdt_enable(WDTO_15MS); \ 72 | if (ledon) NANITE_DDR |=_BV(NANITE_PIN); \ 73 | } 74 | 75 | #define nanite_poll() { \ 76 | uint8_t nanite_tmp=NANITE_DDR;\ 77 | NANITE_DDR &=~_BV(NANITE_PIN); \ 78 | _delay_us(5); \ 79 | if (!(NANITE_INP & _BV(NANITE_PIN))) wdt_enable(WDTO_15MS); \ 80 | NANITE_DDR =nanite_tmp; \ 81 | } 82 | 83 | 84 | /* 85 | nanite_led 86 | 87 | input: boolean to turn the LED on or off 88 | output: none 89 | 90 | Turns LED on or off without polling the reset switch. Use this if you do not want the reset functionality. 91 | */ 92 | 93 | #define nanite_setled(ledon) { \ 94 | NANITE_DDR &=~_BV(NANITE_PIN); \ 95 | if (ledon) NANITE_DDR |=_BV(NANITE_PIN); \ 96 | } 97 | 98 | #define nanite_init_wdt() { \ 99 | wdt_enable(WDTO_500MS); \ 100 | NANITE_PORT &=~_BV(NANITE_PIN); \ 101 | NANITE_DDR &=~_BV(NANITE_PIN); \ 102 | } 103 | 104 | #define nanite_poll_wdt(a) { \ 105 | NANITE_DDR &=~_BV(NANITE_PIN); \ 106 | _delay_us(5); \ 107 | if (NANITE_INP & _BV(NANITE_PIN)) wdt_reset(); \ 108 | if (a) NANITE_DDR |=_BV(NANITE_PIN); \ 109 | } 110 | 111 | 112 | #endif /* NANITE_H_ */ -------------------------------------------------------------------------------- /Nanite841/Firmware/Nanite841/Makefile.inc: -------------------------------------------------------------------------------- 1 | # Name: Makefile 2 | # Project: Micronucleus 3 | # License: GNU GPL v2 (see License.txt) 4 | # 5 | # Controller type: ATtiny 841 6 | # Configuration: Default configuration - 12 Mhz RC oscillator 7 | # Last Change: Mar 16,2014 8 | 9 | 10 | F_CPU = 12000000 11 | DEVICE = attiny841 12 | 13 | # hexadecimal address for bootloader section to begin. To calculate the best value: 14 | # - make clean; make main.hex; ### output will list data: 2124 (or something like that) 15 | # - for the size of your device (8kb = 1024 * 8 = 8192) subtract above value 2124... = 6068 16 | # - How many pages in is that? 6068 / 64 (tiny85 page size in bytes) = 94.8125 17 | # - round that down to 94 - our new bootloader address is 94 * 64 = 6016, in hex = 1780 18 | BOOTLOADER_ADDRESS = 19C0 19 | 20 | FUSEOPT = -U lfuse:w:0xe2:m -U hfuse:w:0xdd:m -U efuse:w:0xfe:m 21 | FUSEOPT_DISABLERESET = # TODO 22 | 23 | #--------------------------------------------------------------------- 24 | # ATtiny841 25 | #--------------------------------------------------------------------- 26 | # Fuse extended byte: 27 | # 0xFE = 1 1 1 1 1 1 1 0 28 | # ^ 29 | # | 30 | # +---- SELFPRGEN (enable self programming flash) 31 | # 32 | # Fuse high byte: 33 | # 0xdd = 1 1 0 1 1 1 0 1 34 | # ^ ^ ^ ^ ^ \-+-/ 35 | # | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V) 36 | # | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved) 37 | # | | | +-------------- WDTON (watchdog timer always on -> disable) 38 | # | | +---------------- SPIEN (enable serial programming -> enabled) 39 | # | +------------------ DWEN (debug wire enable) 40 | # +-------------------- RSTDISBL (disable external reset -> enabled) 41 | # 42 | # Fuse high byte ("no reset": external reset disabled, can't program through SPI anymore) 43 | # 0x5d = 0 1 0 1 1 1 0 1 44 | # ^ ^ ^ ^ ^ \-+-/ 45 | # | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V) 46 | # | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved) 47 | # | | | +-------------- WDTON (watchdog timer always on -> disable) 48 | # | | +---------------- SPIEN (enable serial programming -> enabled) 49 | # | +------------------ DWEN (debug wire enable) 50 | # +-------------------- RSTDISBL (disable external reset -> disabled!) 51 | # 52 | # Fuse low byte: 53 | # 0xe2 = 1 1 1 0 0 0 1 0 54 | # ^ ^ \+/ \--+--/ 55 | # | | | +------- CKSEL 3..0 (clock selection -> RC Oscillator) 56 | # | | +--------------- SUT 1..0 (BOD enabled, fast rising power) 57 | # | +------------------ CKOUT (clock output on CKOUT pin -> disabled) 58 | # +-------------------- CKDIV8 (divide clock by 8 -> don't divide) 59 | 60 | 61 | -------------------------------------------------------------------------------- /Nanite841/Firmware/Nanite841_bootloader.hex: -------------------------------------------------------------------------------- 1 | :1019C00017C019BA10859315090212000101008091 2 | :1019D0003209040000000000000012011001FF00A5 3 | :1019E0000008D01653070002000000010403090498 4 | :1019F00011241FBECFEFD2E0CDBFDEBF21E0A0E0BB 5 | :101A0000B1E001C01D92AC32B207E1F78FC1A82F3F 6 | :101A1000B92F80E090E041E050EA609530E009C0E5 7 | :101A20002D9182279795879510F084279527305E12 8 | :101A3000C8F36F5FA8F30895EADF8D939D9308952F 9 | :101A4000CF93CFB7CF93C395B09BE9F7B09B09C0B5 10 | :101A5000B09B07C0B09B05C0B09B03C0B09B01C04A 11 | :101A6000A7C0DF93C0910E01DD27CA5EDE4FB09B99 12 | :101A700002C0DF91EBCF2F930F931F9306B32FEF8D 13 | :101A800000FB20F94F933F9316B34FEF012700FB64 14 | :101A900021F93BE031C04E7F012F16B3216028C0F1 15 | :101AA000102F4D7F2260000006B329C04B7F2460B9 16 | :101AB000012F000016B32BC016B3477F28602AC041 17 | :101AC0004F7E06B320612CC04F7D16B320622FC01D 18 | :101AD0004F7B06B3206432C0422706B349934FEFD1 19 | :101AE0000000102710FB20F916B31370C9F1297FED 20 | :101AF00091F2012700FB21F906B3237F89F23150CF 21 | :101B000058F1102710FB22F916B3277E79F201272E 22 | :101B100000FB23F92F7C81F206B3102710FB24F978 23 | :101B20002F7971F200C016B3012700FB25F92F733E 24 | :101B300059F200C006B3102710FB26F9223040F2FC 25 | :101B400000C016B3012700FB27F9243028F64F7791 26 | :101B5000206816B30000F9CF10E21ABF00271DC09D 27 | :101B60003B503195C31BD04010E21ABF0881033CA3 28 | :101B700019F10B3409F120910C011981110F121385 29 | :101B8000EDCF093641F10D3211F0013E39F7CAE0CF 30 | :101B90001AB715FD02C0CA95D9F7009314013F91F9 31 | :101BA0004F911F910F912F91DF91CAB7C5FD4BCF78 32 | :101BB000CF91CFBFCF91089520911401222379F3C3 33 | :101BC000109112011123E1F43430E2F0309312014C 34 | :101BD00020930D0117C00091120101308CF40AE529 35 | :101BE00030910F0134FD10C000930F01C1E0D1E02E 36 | :101BF0000FC02795A8F45150A9F4220F0000F9CF87 37 | :101C00004AE503C042ED01C0432FC4E1D0E032E019 38 | :101C100017B31360C09A17BB08B320E413E05F93B7 39 | :101C2000012756E008BB279520F4515021F4220FDC 40 | :101C3000F9CF012756E000003B5A08BBD0F22795A8 41 | :101C400028F4515029F4220F0000F9CF012756E063 42 | :101C5000279508BB20F4515021F4220FF9CF01271A 43 | :101C600056E02991332308BB21F60C7F1091130114 44 | :101C7000110FC651D04008BB11F010930C0110E2B7 45 | :101C80001ABF016017B31C7F402F4C7F5F9100C0CB 46 | :101C900000C008BB17BB48BB82CF2FEFB0E8A0E065 47 | :101CA0004BE0B093740000008EE599E0B099FECF50 48 | :101CB000B09BFECF0197B099FDCFB19B09C096B301 49 | :101CC0009370E9F796B39370D1F7B09BFECFECCF4A 50 | :101CD00097FF03C0BA1B819501C0BA0FA69541F4C6 51 | :101CE000A0E430F4281718F030917400282FA1E0F8 52 | :101CF0004150B9F63093740000000895F201309716 53 | :101D000049F02AEB421629E1520631F48091740021 54 | :101D100090E002C08FED9CEC21E00C012093570075 55 | :101D2000E8951124CF0102962C010895809174004A 56 | :101D3000282EEAEBF9E1E491EF3F19F0E09374000B 57 | :101D4000000004B601FC06C0EDEBF9E1E491EF3FC1 58 | :101D500009F04FC114BE88ED8093710087E081BD0A 59 | :101D6000B89A2FE78CEF9AE0215080409040E1F73D 60 | :101D700000C00000B8988AE580930F018FEF809330 61 | :101D8000000180B5826080BD8BB780628BBFC29836 62 | :101D9000712C312C412C512C14E1C0EADFE086B3C8 63 | :101DA000837009F014E1115029F41092130110927C 64 | :101DB0000C0173DF0AB605FE03C042DE712C03C0BE 65 | :101DC0002197209761F7A89522E032120CC0E0EC31 66 | :101DD000F9E1E054F10983E080935700E8953097EA 67 | :101DE000C1F7412C512C832D803459F4F2013297E4 68 | :101DF000E03C89E1F80750F485E080935700E895CE 69 | :101E000005C0843019F4CD2B11F4EFC0312C809132 70 | :101E10001201835087FD98C090910D019D3209F009 71 | :101E200091C0883009F08EC083EC809301018AE56F 72 | :101E300080930F019091170190768091180199235A 73 | :101E400061F1811108C082EC99E1909311018093B6 74 | :101E5000100126E06CC0813059F44114510409F49A 75 | :101E60004CC080911B01807F482E50901C0145C0C2 76 | :101E7000833081F48091190190911A013FDF8091A4 77 | :101E80001B0190911C013ADF842D8F70B1F580E425 78 | :101E9000382E33C08F73382E30C0909119011092B4 79 | :101EA0000A01811106C010920B018AE091E022E044 80 | :101EB0003AC0853019F49093130127C08630F9F4A5 81 | :101EC00080911A01813019F48AED99E104C08230C1 82 | :101ED00041F488EC99E1909311018093100122E183 83 | :101EE00026C0833051F4911108C08CEE99E1909393 84 | :101EF00011018093100124E01AC020E018C088303E 85 | :101F000079F0893031F4909315018AE091E020E076 86 | :101F10000AC021E08A3009F020E08AE091E003C0A5 87 | :101F200085E191E021E0909311018093100180916F 88 | :101F30001E01811105C080911D01821708F4282F10 89 | :101F4000209300011092120180910F0184FF31C093 90 | :101F5000809100018F3F69F1C82F893008F0C8E0F7 91 | :101F60008C1B809300018091010198E88927809360 92 | :101F70000101CC2391F0E0911001F091110182E078 93 | :101F800091E0DC0124912D9331962C2F280F2A13F8 94 | :101F9000F9CFF0931101E09310016C2F82E091E0F2 95 | :101FA0004BDDCC5FCC3019F08FEF80930001C093F4 96 | :101FB0000F01C30101963C01803B944029F4EDEBF5 97 | :101FC000F9E1E491EF3F89F4862D8C7411F0BA9811 98 | :101FD00001C0BA9A0AB605FEDFCE88E1B19988E160 99 | :101FE0008150E1F780E28ABFD7CEBA98B89A1BBE7B 100 | :0C1FF00010BC209274000000E1CCFFCF78 101 | :04000003000019C020 102 | :00000001FF 103 | -------------------------------------------------------------------------------- /Nanite841/Firmware/Nanite841/bootloaderconfig.h: -------------------------------------------------------------------------------- 1 | /* Name: bootloaderconfig.h 2 | * Micronucleus configuration file. 3 | * This file (together with some settings in Makefile.inc) configures the boot loader 4 | * according to the hardware. 5 | * 6 | * Controller type: ATtiny 841 - 12 MHz 7 | * Configuration: Nanite841 8 | * USB D- : PB0 9 | * USB D+ : PB1 10 | * Entry : Always 11 | * LED : PB2, Active Low 12 | * OSCCAL : Revert to precalibrated value (8 MHz) 13 | * Note: can use 12 MHz V-USB without PLL due to stable RC-osc in ATTiny841 14 | * Flash write time may be too 15 | * Last Change: February 8,2015 16 | * 17 | * License: GNU GPL v2 (see License.txt 18 | */ 19 | 20 | #ifndef __bootloaderconfig_h_included__ 21 | #define __bootloaderconfig_h_included__ 22 | 23 | /* ------------------------------------------------------------------------- */ 24 | /* Hardware configuration. */ 25 | /* Change this according to your CPU and USB configuration */ 26 | /* ------------------------------------------------------------------------- */ 27 | 28 | #define USB_CFG_IOPORTNAME B 29 | /* This is the port where the USB bus is connected. When you configure it to 30 | * "B", the registers PORTB, PINB and DDRB will be used. 31 | */ 32 | 33 | #define USB_CFG_DMINUS_BIT 0 34 | /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. 35 | * This may be any bit in the port. 36 | */ 37 | #define USB_CFG_DPLUS_BIT 1 38 | /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. 39 | * This may be any bit in the port, but must be configured as a pin change interrupt. 40 | */ 41 | 42 | #define USB_CFG_CLOCK_KHZ (F_CPU/1000) 43 | /* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, 44 | * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code 45 | * require no crystal, they tolerate +/- 1% deviation from the nominal 46 | * frequency. All other rates require a precision of 2000 ppm and thus a 47 | * crystal! 48 | * Since F_CPU should be defined to your actual clock rate anyway, you should 49 | * not need to modify this setting. 50 | */ 51 | 52 | /* ------------- Set up interrupt configuration (CPU specific) -------------- */ 53 | /* The register names change quite a bit in the ATtiny family. Pay attention */ 54 | /* to the manual. Note that the interrupt flag system is still used even though */ 55 | /* interrupts are disabled. So this has to be configured correctly. */ 56 | 57 | 58 | // setup interrupt for Pin Change for D+ 59 | #define USB_INTR_CFG PCMSK1 60 | #define USB_INTR_CFG_SET (1 << USB_CFG_DPLUS_BIT) 61 | #define USB_INTR_CFG_CLR 0 62 | #define USB_INTR_ENABLE GIMSK 63 | #define USB_INTR_ENABLE_BIT PCIE1 64 | #define USB_INTR_PENDING GIFR 65 | #define USB_INTR_PENDING_BIT PCIF1 66 | #define USB_INTR_VECTOR PCINT1_vect 67 | 68 | /* ------------------------------------------------------------------------- */ 69 | /* Configuration relevant to the CPU the bootloader is running on */ 70 | /* ------------------------------------------------------------------------- */ 71 | 72 | // how many milliseconds should host wait till it sends another erase or write? 73 | // needs to be above 4.5 (and a whole integer) as avr freezes for 4.5ms 74 | 75 | // Set bit 7 to reduce wait time for page erase by factor of four 76 | #define MICRONUCLEUS_WRITE_SLEEP 128 + 5 77 | 78 | // ATtiny841 does not know OSCCAL 79 | #ifndef OSCCAL 80 | #define OSCCAL OSCCAL0 81 | #endif 82 | 83 | /* ---------------------- feature / code size options ---------------------- */ 84 | /* Configure the behavior of the bootloader here */ 85 | /* ------------------------------------------------------------------------- */ 86 | 87 | /* 88 | * Define Bootloader entry condition 89 | * 90 | * If the entry condition is not met, the bootloader will not be activated and the user program 91 | * is executed directly after a reset. If no user program has been loaded, the bootloader 92 | * is always active. 93 | * 94 | * ENTRY_ALWAYS Always activate the bootloader after reset. Requires the least 95 | * amount of code. 96 | * 97 | * ENTRY_WATCHDOG Activate the bootloader after a watchdog reset. This can be used 98 | * to enter the bootloader from the user program. 99 | * Adds 22 bytes. 100 | * 101 | * ENTRY_EXT_RESET Activate the bootloader after an external reset was issued by 102 | * pulling the reset pin low. It may be necessary to add an external 103 | * pull-up resistor to the reset pin if this entry method appears to 104 | * behave unreliably. 105 | * Adds 22 bytes. 106 | * 107 | * ENTRY_JUMPER Activate the bootloader when a specific pin is pulled low by an 108 | * external jumper. 109 | * Adds 34 bytes. 110 | * 111 | * JUMPER_PIN Pin the jumper is connected to. (e.g. PB0) 112 | * JUMPER_PORT Port out register for the jumper (e.g. PORTB) 113 | * JUMPER_DDR Port data direction register for the jumper (e.g. DDRB) 114 | * JUMPER_INP Port inout register for the jumper (e.g. PINB) 115 | * 116 | */ 117 | 118 | #define ENTRYMODE ENTRY_EXT_RESET 119 | 120 | #define JUMPER_PIN PB0 121 | #define JUMPER_PORT PORTB 122 | #define JUMPER_DDR DDRB 123 | #define JUMPER_INP PINB 124 | 125 | /* 126 | Internal implementation, don't change this unless you want to add an entrymode. 127 | */ 128 | 129 | #define ENTRY_ALWAYS 1 130 | #define ENTRY_WATCHDOG 2 131 | #define ENTRY_EXT_RESET 3 132 | #define ENTRY_JUMPER 4 133 | 134 | #if ENTRYMODE==ENTRY_ALWAYS 135 | #define bootLoaderInit() 136 | #define bootLoaderExit() 137 | #define bootLoaderStartCondition() 1 138 | #elif ENTRYMODE==ENTRY_WATCHDOG 139 | #define bootLoaderInit() 140 | #define bootLoaderExit() 141 | #define bootLoaderStartCondition() (MCUSR&_BV(WDRF)) 142 | #elif ENTRYMODE==ENTRY_EXT_RESET 143 | #define bootLoaderInit() 144 | #define bootLoaderExit() 145 | #define bootLoaderStartCondition() (MCUSR&_BV(EXTRF)) 146 | #elif ENTRYMODE==ENTRY_JUMPER 147 | // Enable pull up on jumper pin and delay to stabilize input 148 | #define bootLoaderInit() {JUMPER_DDR&=~_BV(JUMPER_PIN);JUMPER_PORT|=_BV(JUMPER_PIN);_delay_ms(1);} 149 | #define bootLoaderExit() {JUMPER_PORT&=~_BV(JUMPER_PIN);} 150 | #define bootLoaderStartCondition() (!(JUMPER_INP&_BV(JUMPER_PIN))) 151 | #else 152 | #error "No entry mode defined" 153 | #endif 154 | 155 | /* 156 | * Define bootloader timeout value. 157 | * 158 | * The bootloader will only time out if a user program was loaded. 159 | * 160 | * AUTO_EXIT_NO_USB_MS The bootloader will exit after this delay if no USB is connected. 161 | * Set to 0 to disable 162 | * Adds ~6 bytes. 163 | * (This will wait for an USB SE0 reset from the host) 164 | * 165 | * AUTO_EXIT_MS The bootloader will exit after this delay if no USB communication 166 | * from the host tool was received. 167 | * Set to 0 to disable 168 | * 169 | * All values are approx. in milliseconds 170 | */ 171 | 172 | #define AUTO_EXIT_NO_USB_MS 0 173 | #define AUTO_EXIT_MS 6000 174 | 175 | /* 176 | * Defines the setting of the RC-oscillator calibration after quitting the bootloader. (OSCCAL) 177 | * 178 | * OSCCAL_RESTORE_DEFAULT Set this to '1' to revert to OSCCAL factore calibration after bootlaoder exit. 179 | * This is 8 MHz +/-2% on most devices or 16 MHz on the ATtiny 85 with activated PLL. 180 | * Adds ~14 bytes. 181 | * 182 | * OSCCAL_SAVE_CALIB Set this to '1' to save the OSCCAL calibration during program upload. 183 | * This value will be reloaded after reset and will also be used for the user 184 | * program unless "OSCCAL_RESTORE_DEFAULT" is active. This allows calibrate the internal 185 | * RC oscillator to the F_CPU target frequency +/-1% from the USB timing. Please note 186 | * that only true if the ambient temperature does not change. 187 | * Adds ~38 bytes. 188 | * 189 | * OSCCAL_HAVE_XTAL Set this to '1' if you have an external crystal oscillator. In this case no attempt 190 | * will be made to calibrate the oscillator. You should deactivate both options above 191 | * if you use this to avoid redundant code. 192 | * 193 | * If both options are selected, OSCCAL_RESTORE_DEFAULT takes precedence. 194 | * 195 | * If no option is selected, OSCCAL will be left untouched and stays at either factory calibration or F_CPU depending 196 | * on whether the bootloader was activated. This will take the least memory. You can use this if your program 197 | * comes with its own OSCCAL calibration or an external clock source is used. 198 | */ 199 | 200 | #define OSCCAL_RESTORE_DEFAULT 1 201 | #define OSCCAL_SAVE_CALIB 1 202 | #define OSCCAL_HAVE_XTAL 0 203 | 204 | /* 205 | * Defines handling of an indicator LED while the bootloader is active. 206 | * 207 | * LED_MODE Define behavior of attached LED or suppress LED code. 208 | * 209 | * NONE Do not generate LED code (gains 18 bytes). 210 | * ACTIVE_HIGH LED is on when output pin is high. This will toggle bettwen 1 and 0. 211 | * ACTIVE_LOW LED is on when output pin is low. This will toggle between Z and 0. 212 | * 213 | * LED_DDR,LED_PORT,LED_PIN Where is your LED connected? 214 | * 215 | */ 216 | 217 | #define LED_MODE ACTIVE_LOW 218 | 219 | #define LED_DDR DDRB 220 | #define LED_PORT PORTB 221 | #define LED_PIN PB2 222 | 223 | /* 224 | * This is the implementation of the LED code. Change the configuration above unless you want to 225 | * change the led behavior 226 | * 227 | * LED_INIT Called once after bootloader entry 228 | * LED_EXIT Called once during bootloader exit 229 | * LED_MACRO Called in the main loop with the idle counter as parameter. 230 | * Use to define pattern. 231 | */ 232 | 233 | #define NONE 0 234 | #define ACTIVE_HIGH 1 235 | #define ACTIVE_LOW 2 236 | 237 | #if LED_MODE==ACTIVE_HIGH 238 | #define LED_INIT(x) LED_DDR = _BV(LED_PIN); 239 | #define LED_EXIT(x) {LED_DDR &=~_BV(LED_PIN);LED_PORT &=~_BV(LED_PIN);} 240 | #define LED_MACRO(x) if ( x & 0x4c ) {LED_PORT&=~_BV(LED_PIN);} else {LED_PORT|=_BV(LED_PIN);} 241 | #elif LED_MODE==ACTIVE_LOW 242 | #define LED_INIT(x) LED_PORT &=~_BV(LED_PIN); 243 | #define LED_EXIT(x) LED_DDR &=~_BV(LED_PIN); 244 | #define LED_MACRO(x) if ( x & 0x4c ) {LED_DDR&=~_BV(LED_PIN);} else {LED_DDR|=_BV(LED_PIN);} 245 | #elif LED_MODE==NONE 246 | #define LED_INIT(x) 247 | #define LED_EXIT(x) 248 | #define LED_MACRO(x) 249 | #endif 250 | 251 | /* --------------------------------------------------------------------------- */ 252 | /* Micronucleus internal configuration. Do not change anything below this line */ 253 | /* --------------------------------------------------------------------------- */ 254 | 255 | // Microcontroller vectortable entries in the flash 256 | #define RESET_VECTOR_OFFSET 0 257 | 258 | // number of bytes before the boot loader vectors to store the tiny application vector table 259 | #define TINYVECTOR_RESET_OFFSET 4 260 | #define TINYVECTOR_OSCCAL_OFFSET 6 261 | 262 | /* ------------------------------------------------------------------------ */ 263 | // postscript are the few bytes at the end of programmable memory which store tinyVectors 264 | #define POSTSCRIPT_SIZE 6 265 | #define PROGMEM_SIZE (BOOTLOADER_ADDRESS - POSTSCRIPT_SIZE) /* max size of user program */ 266 | 267 | #endif /* __bootloader_h_included__ */ 268 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | GNU GENERAL PUBLIC LICENSE 2 | Version 2, June 1991 3 | 4 | Copyright (C) 1989, 1991 Free Software Foundation, Inc., 5 | 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA 6 | Everyone is permitted to copy and distribute verbatim copies 7 | of this license document, but changing it is not allowed. 8 | 9 | Preamble 10 | 11 | The licenses for most software are designed to take away your 12 | freedom to share and change it. By contrast, the GNU General Public 13 | License is intended to guarantee your freedom to share and change free 14 | software--to make sure the software is free for all its users. This 15 | General Public License applies to most of the Free Software 16 | Foundation's software and to any other program whose authors commit to 17 | using it. (Some other Free Software Foundation software is covered by 18 | the GNU Lesser General Public License instead.) You can apply it to 19 | your programs, too. 20 | 21 | When we speak of free software, we are referring to freedom, not 22 | price. Our General Public Licenses are designed to make sure that you 23 | have the freedom to distribute copies of free software (and charge for 24 | this service if you wish), that you receive source code or can get it 25 | if you want it, that you can change the software or use pieces of it 26 | in new free programs; and that you know you can do these things. 27 | 28 | To protect your rights, we need to make restrictions that forbid 29 | anyone to deny you these rights or to ask you to surrender the rights. 30 | These restrictions translate to certain responsibilities for you if you 31 | distribute copies of the software, or if you modify it. 32 | 33 | For example, if you distribute copies of such a program, whether 34 | gratis or for a fee, you must give the recipients all the rights that 35 | you have. You must make sure that they, too, receive or can get the 36 | source code. And you must show them these terms so they know their 37 | rights. 38 | 39 | We protect your rights with two steps: (1) copyright the software, and 40 | (2) offer you this license which gives you legal permission to copy, 41 | distribute and/or modify the software. 42 | 43 | Also, for each author's protection and ours, we want to make certain 44 | that everyone understands that there is no warranty for this free 45 | software. If the software is modified by someone else and passed on, we 46 | want its recipients to know that what they have is not the original, so 47 | that any problems introduced by others will not reflect on the original 48 | authors' reputations. 49 | 50 | Finally, any free program is threatened constantly by software 51 | patents. We wish to avoid the danger that redistributors of a free 52 | program will individually obtain patent licenses, in effect making the 53 | program proprietary. To prevent this, we have made it clear that any 54 | patent must be licensed for everyone's free use or not licensed at all. 55 | 56 | The precise terms and conditions for copying, distribution and 57 | modification follow. 58 | 59 | GNU GENERAL PUBLIC LICENSE 60 | TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 61 | 62 | 0. This License applies to any program or other work which contains 63 | a notice placed by the copyright holder saying it may be distributed 64 | under the terms of this General Public License. The "Program", below, 65 | refers to any such program or work, and a "work based on the Program" 66 | means either the Program or any derivative work under copyright law: 67 | that is to say, a work containing the Program or a portion of it, 68 | either verbatim or with modifications and/or translated into another 69 | language. (Hereinafter, translation is included without limitation in 70 | the term "modification".) Each licensee is addressed as "you". 71 | 72 | Activities other than copying, distribution and modification are not 73 | covered by this License; they are outside its scope. The act of 74 | running the Program is not restricted, and the output from the Program 75 | is covered only if its contents constitute a work based on the 76 | Program (independent of having been made by running the Program). 77 | Whether that is true depends on what the Program does. 78 | 79 | 1. You may copy and distribute verbatim copies of the Program's 80 | source code as you receive it, in any medium, provided that you 81 | conspicuously and appropriately publish on each copy an appropriate 82 | copyright notice and disclaimer of warranty; keep intact all the 83 | notices that refer to this License and to the absence of any warranty; 84 | and give any other recipients of the Program a copy of this License 85 | along with the Program. 86 | 87 | You may charge a fee for the physical act of transferring a copy, and 88 | you may at your option offer warranty protection in exchange for a fee. 89 | 90 | 2. You may modify your copy or copies of the Program or any portion 91 | of it, thus forming a work based on the Program, and copy and 92 | distribute such modifications or work under the terms of Section 1 93 | above, provided that you also meet all of these conditions: 94 | 95 | a) You must cause the modified files to carry prominent notices 96 | stating that you changed the files and the date of any change. 97 | 98 | b) You must cause any work that you distribute or publish, that in 99 | whole or in part contains or is derived from the Program or any 100 | part thereof, to be licensed as a whole at no charge to all third 101 | parties under the terms of this License. 102 | 103 | c) If the modified program normally reads commands interactively 104 | when run, you must cause it, when started running for such 105 | interactive use in the most ordinary way, to print or display an 106 | announcement including an appropriate copyright notice and a 107 | notice that there is no warranty (or else, saying that you provide 108 | a warranty) and that users may redistribute the program under 109 | these conditions, and telling the user how to view a copy of this 110 | License. (Exception: if the Program itself is interactive but 111 | does not normally print such an announcement, your work based on 112 | the Program is not required to print an announcement.) 113 | 114 | These requirements apply to the modified work as a whole. If 115 | identifiable sections of that work are not derived from the Program, 116 | and can be reasonably considered independent and separate works in 117 | themselves, then this License, and its terms, do not apply to those 118 | sections when you distribute them as separate works. But when you 119 | distribute the same sections as part of a whole which is a work based 120 | on the Program, the distribution of the whole must be on the terms of 121 | this License, whose permissions for other licensees extend to the 122 | entire whole, and thus to each and every part regardless of who wrote it. 123 | 124 | Thus, it is not the intent of this section to claim rights or contest 125 | your rights to work written entirely by you; rather, the intent is to 126 | exercise the right to control the distribution of derivative or 127 | collective works based on the Program. 128 | 129 | In addition, mere aggregation of another work not based on the Program 130 | with the Program (or with a work based on the Program) on a volume of 131 | a storage or distribution medium does not bring the other work under 132 | the scope of this License. 133 | 134 | 3. You may copy and distribute the Program (or a work based on it, 135 | under Section 2) in object code or executable form under the terms of 136 | Sections 1 and 2 above provided that you also do one of the following: 137 | 138 | a) Accompany it with the complete corresponding machine-readable 139 | source code, which must be distributed under the terms of Sections 140 | 1 and 2 above on a medium customarily used for software interchange; or, 141 | 142 | b) Accompany it with a written offer, valid for at least three 143 | years, to give any third party, for a charge no more than your 144 | cost of physically performing source distribution, a complete 145 | machine-readable copy of the corresponding source code, to be 146 | distributed under the terms of Sections 1 and 2 above on a medium 147 | customarily used for software interchange; or, 148 | 149 | c) Accompany it with the information you received as to the offer 150 | to distribute corresponding source code. (This alternative is 151 | allowed only for noncommercial distribution and only if you 152 | received the program in object code or executable form with such 153 | an offer, in accord with Subsection b above.) 154 | 155 | The source code for a work means the preferred form of the work for 156 | making modifications to it. For an executable work, complete source 157 | code means all the source code for all modules it contains, plus any 158 | associated interface definition files, plus the scripts used to 159 | control compilation and installation of the executable. However, as a 160 | special exception, the source code distributed need not include 161 | anything that is normally distributed (in either source or binary 162 | form) with the major components (compiler, kernel, and so on) of the 163 | operating system on which the executable runs, unless that component 164 | itself accompanies the executable. 165 | 166 | If distribution of executable or object code is made by offering 167 | access to copy from a designated place, then offering equivalent 168 | access to copy the source code from the same place counts as 169 | distribution of the source code, even though third parties are not 170 | compelled to copy the source along with the object code. 171 | 172 | 4. You may not copy, modify, sublicense, or distribute the Program 173 | except as expressly provided under this License. Any attempt 174 | otherwise to copy, modify, sublicense or distribute the Program is 175 | void, and will automatically terminate your rights under this License. 176 | However, parties who have received copies, or rights, from you under 177 | this License will not have their licenses terminated so long as such 178 | parties remain in full compliance. 179 | 180 | 5. You are not required to accept this License, since you have not 181 | signed it. However, nothing else grants you permission to modify or 182 | distribute the Program or its derivative works. These actions are 183 | prohibited by law if you do not accept this License. Therefore, by 184 | modifying or distributing the Program (or any work based on the 185 | Program), you indicate your acceptance of this License to do so, and 186 | all its terms and conditions for copying, distributing or modifying 187 | the Program or works based on it. 188 | 189 | 6. Each time you redistribute the Program (or any work based on the 190 | Program), the recipient automatically receives a license from the 191 | original licensor to copy, distribute or modify the Program subject to 192 | these terms and conditions. You may not impose any further 193 | restrictions on the recipients' exercise of the rights granted herein. 194 | You are not responsible for enforcing compliance by third parties to 195 | this License. 196 | 197 | 7. If, as a consequence of a court judgment or allegation of patent 198 | infringement or for any other reason (not limited to patent issues), 199 | conditions are imposed on you (whether by court order, agreement or 200 | otherwise) that contradict the conditions of this License, they do not 201 | excuse you from the conditions of this License. If you cannot 202 | distribute so as to satisfy simultaneously your obligations under this 203 | License and any other pertinent obligations, then as a consequence you 204 | may not distribute the Program at all. For example, if a patent 205 | license would not permit royalty-free redistribution of the Program by 206 | all those who receive copies directly or indirectly through you, then 207 | the only way you could satisfy both it and this License would be to 208 | refrain entirely from distribution of the Program. 209 | 210 | If any portion of this section is held invalid or unenforceable under 211 | any particular circumstance, the balance of the section is intended to 212 | apply and the section as a whole is intended to apply in other 213 | circumstances. 214 | 215 | It is not the purpose of this section to induce you to infringe any 216 | patents or other property right claims or to contest validity of any 217 | such claims; this section has the sole purpose of protecting the 218 | integrity of the free software distribution system, which is 219 | implemented by public license practices. Many people have made 220 | generous contributions to the wide range of software distributed 221 | through that system in reliance on consistent application of that 222 | system; it is up to the author/donor to decide if he or she is willing 223 | to distribute software through any other system and a licensee cannot 224 | impose that choice. 225 | 226 | This section is intended to make thoroughly clear what is believed to 227 | be a consequence of the rest of this License. 228 | 229 | 8. If the distribution and/or use of the Program is restricted in 230 | certain countries either by patents or by copyrighted interfaces, the 231 | original copyright holder who places the Program under this License 232 | may add an explicit geographical distribution limitation excluding 233 | those countries, so that distribution is permitted only in or among 234 | countries not thus excluded. In such case, this License incorporates 235 | the limitation as if written in the body of this License. 236 | 237 | 9. The Free Software Foundation may publish revised and/or new versions 238 | of the General Public License from time to time. Such new versions will 239 | be similar in spirit to the present version, but may differ in detail to 240 | address new problems or concerns. 241 | 242 | Each version is given a distinguishing version number. If the Program 243 | specifies a version number of this License which applies to it and "any 244 | later version", you have the option of following the terms and conditions 245 | either of that version or of any later version published by the Free 246 | Software Foundation. If the Program does not specify a version number of 247 | this License, you may choose any version ever published by the Free Software 248 | Foundation. 249 | 250 | 10. If you wish to incorporate parts of the Program into other free 251 | programs whose distribution conditions are different, write to the author 252 | to ask for permission. For software which is copyrighted by the Free 253 | Software Foundation, write to the Free Software Foundation; we sometimes 254 | make exceptions for this. Our decision will be guided by the two goals 255 | of preserving the free status of all derivatives of our free software and 256 | of promoting the sharing and reuse of software generally. 257 | 258 | NO WARRANTY 259 | 260 | 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY 261 | FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN 262 | OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 263 | PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED 264 | OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 265 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS 266 | TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE 267 | PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, 268 | REPAIR OR CORRECTION. 269 | 270 | 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING 271 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR 272 | REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, 273 | INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING 274 | OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED 275 | TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY 276 | YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER 277 | PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 278 | POSSIBILITY OF SUCH DAMAGES. 279 | 280 | END OF TERMS AND CONDITIONS 281 | 282 | How to Apply These Terms to Your New Programs 283 | 284 | If you develop a new program, and you want it to be of the greatest 285 | possible use to the public, the best way to achieve this is to make it 286 | free software which everyone can redistribute and change under these terms. 287 | 288 | To do so, attach the following notices to the program. It is safest 289 | to attach them to the start of each source file to most effectively 290 | convey the exclusion of warranty; and each file should have at least 291 | the "copyright" line and a pointer to where the full notice is found. 292 | 293 | {description} 294 | Copyright (C) {year} {fullname} 295 | 296 | This program is free software; you can redistribute it and/or modify 297 | it under the terms of the GNU General Public License as published by 298 | the Free Software Foundation; either version 2 of the License, or 299 | (at your option) any later version. 300 | 301 | This program is distributed in the hope that it will be useful, 302 | but WITHOUT ANY WARRANTY; without even the implied warranty of 303 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 304 | GNU General Public License for more details. 305 | 306 | You should have received a copy of the GNU General Public License along 307 | with this program; if not, write to the Free Software Foundation, Inc., 308 | 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. 309 | 310 | Also add information on how to contact you by electronic and paper mail. 311 | 312 | If the program is interactive, make it output a short notice like this 313 | when it starts in an interactive mode: 314 | 315 | Gnomovision version 69, Copyright (C) year name of author 316 | Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 317 | This is free software, and you are welcome to redistribute it 318 | under certain conditions; type `show c' for details. 319 | 320 | The hypothetical commands `show w' and `show c' should show the appropriate 321 | parts of the General Public License. Of course, the commands you use may 322 | be called something other than `show w' and `show c'; they could even be 323 | mouse-clicks or menu items--whatever suits your program. 324 | 325 | You should also get your employer (if you work as a programmer) or your 326 | school, if any, to sign a "copyright disclaimer" for the program, if 327 | necessary. Here is a sample; alter the names: 328 | 329 | Yoyodyne, Inc., hereby disclaims all copyright interest in the program 330 | `Gnomovision' (which makes passes at compilers) written by James Hacker. 331 | 332 | {signature of Ty Coon}, 1 April 1989 333 | Ty Coon, President of Vice 334 | 335 | This General Public License does not permit incorporating your program into 336 | proprietary programs. If your program is a subroutine library, you may 337 | consider it more useful to permit linking proprietary applications with the 338 | library. If this is what you want to do, use the GNU Lesser General 339 | Public License instead of this License. 340 | -------------------------------------------------------------------------------- /Eagle/Nanite 85 micro-b v1.0.brd: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | 113 | 114 | 115 | 116 | 117 | C1 118 | D2 119 | R1 120 | R2 121 | D1 122 | R3 123 | R4 124 | + 125 | 126 | 127 | 128 | 129 | cpld 130 | cpu13 131 | P0 132 | P1 133 | P2 134 | 5V 135 | RS 136 | P3 137 | P4 138 | GND 139 | 140 | 141 | 142 | <h3>SparkFun Electronics' preferred foot prints</h3> 143 | In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.<br><br> 144 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 145 | <br><br> 146 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 147 | 148 | 149 | Fits EIAJ packages (wide version of the SOIC-8). 150 | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | 161 | 162 | 163 | >VALUE 164 | >NAME 165 | 166 | 167 | 168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | 177 | <h3>SparkFun Electronics' preferred foot prints</h3> 178 | In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> 179 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 180 | <br><br> 181 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 182 | 183 | 184 | 185 | 186 | 187 | 188 | >NAME 189 | >VALUE 190 | 191 | 192 | 193 | 194 | <h3>SparkFun Electronics' preferred foot prints</h3> 195 | In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> 196 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 197 | <br><br> 198 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 199 | 200 | 201 | 202 | 203 | 204 | 205 | >NAME 206 | >VALUE 207 | 208 | 209 | 210 | 211 | <h3>SparkFun Electronics' preferred foot prints</h3> 212 | In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br> 213 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 214 | <br><br> 215 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 216 | 217 | 218 | 219 | 220 | 221 | 222 | 223 | 224 | 225 | >NAME 226 | >VALUE 227 | 228 | 229 | 230 | 231 | <b>LEDs</b><p> 232 | <author>Created by librarian@cadsoft.de</author><br> 233 | Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED 234 | 235 | 236 | <b>CHIPLED</b><p> 237 | Source: http://www.osram.convergy.de/ ... LG_R971.pdf 238 | 239 | 240 | 241 | 242 | 243 | 244 | 245 | >NAME 246 | >VALUE 247 | 248 | 249 | 250 | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | 261 | 262 | 263 | <h3>SparkFun Electronics' preferred foot prints</h3> 264 | In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.<br><br> 265 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 266 | <br><br> 267 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 268 | 269 | 270 | Sparkfun SKU# COM-08229 271 | 272 | 273 | 274 | 275 | 276 | 277 | 278 | 279 | 280 | 281 | 282 | 283 | 284 | 285 | 286 | 287 | 288 | 289 | 290 | 291 | 292 | >NAME 293 | >VALUE 294 | 295 | 296 | 297 | 298 | <h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> 299 | 300 | <p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> 301 | 302 | <h3>Obligatory Warning</h3> 303 | <p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> 304 | 305 | <h3>License</h3> 306 | <p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> 307 | <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 308 | </p> 309 | 310 | 311 | 312 | 313 | 314 | 315 | 316 | >NAME 317 | >VALUE 318 | 319 | 320 | 321 | 322 | 323 | 324 | 325 | 326 | <h3>SparkFun Electronics' preferred foot prints</h3> 327 | In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br> 328 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 329 | <br><br> 330 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 331 | 332 | 333 | 334 | 335 | 336 | 337 | 338 | 339 | 340 | 341 | 342 | 343 | 344 | 345 | 346 | 347 | 348 | 349 | 350 | 351 | 352 | 353 | 354 | 355 | 356 | 357 | 358 | 359 | 360 | 361 | 362 | 363 | 364 | 365 | 366 | 367 | >NAME 368 | 369 | 370 | 371 | 372 | 373 | 374 | 375 | 376 | 377 | 378 | 379 | 380 | 381 | 382 | 383 | 384 | 385 | 386 | 387 | 388 | 389 | <b>EAGLE Design Rules</b> 390 | <p> 391 | Die Standard-Design-Rules sind so gewählt, dass sie für 392 | die meisten Anwendungen passen. Sollte ihre Platine 393 | besondere Anforderungen haben, treffen Sie die erforderlichen 394 | Einstellungen hier und speichern die Design Rules unter 395 | einem neuen Namen ab. 396 | <b>Laen's PCB Order Design Rules</b> 397 | <p> 398 | Please make sure your boards conform to these design rules. 399 | 400 | 401 | 402 | 403 | 404 | 405 | 406 | 407 | 408 | 409 | 410 | 411 | 412 | 413 | 414 | 415 | 416 | 417 | 418 | 419 | 420 | 421 | 422 | 423 | 424 | 425 | 426 | 427 | 428 | 429 | 430 | 431 | 432 | 433 | 434 | 435 | 436 | 437 | 438 | 439 | 440 | 441 | 442 | 443 | 444 | 445 | 446 | 447 | 448 | 449 | 450 | 451 | 452 | 453 | 454 | 455 | 456 | 457 | 458 | 459 | 460 | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | 471 | 472 | 473 | 474 | 475 | 476 | 477 | 478 | 479 | 480 | 481 | 482 | 483 | 484 | 485 | 486 | 487 | 488 | 489 | 490 | 491 | 492 | 493 | 494 | 495 | 496 | 497 | 498 | 499 | 500 | 501 | 502 | 503 | 504 | 505 | 506 | 507 | 508 | 509 | 510 | 511 | 512 | 513 | 514 | 515 | 516 | 517 | 518 | 519 | 520 | 521 | 522 | 523 | 524 | 525 | 526 | 527 | 528 | 529 | 530 | 531 | 532 | 533 | 534 | 535 | 536 | 537 | 538 | 539 | 540 | 541 | 542 | 543 | 544 | 545 | 546 | 547 | 548 | 549 | 550 | 551 | 552 | 553 | 554 | 555 | 556 | 557 | 558 | 559 | 560 | 561 | 562 | 563 | 564 | 565 | 566 | 567 | 568 | 569 | 570 | 571 | 572 | 573 | 574 | 575 | 576 | 577 | 578 | 579 | 580 | 581 | 582 | 583 | 584 | 585 | 586 | 587 | 588 | 589 | 590 | 591 | 592 | 593 | 594 | 595 | 596 | 597 | 598 | 599 | 600 | 601 | 602 | 603 | 604 | 605 | 606 | 607 | 608 | 609 | 610 | 611 | 612 | 613 | 614 | 615 | 616 | 617 | 618 | 619 | 620 | 621 | 622 | 623 | 624 | 625 | 626 | 627 | 628 | 629 | 630 | 631 | 632 | 633 | 634 | 635 | 636 | 637 | 638 | 639 | 640 | 641 | 642 | 643 | 644 | 645 | 646 | 647 | 648 | 649 | 650 | 651 | 652 | 653 | 654 | 655 | 656 | 657 | 658 | 659 | 660 | 661 | 662 | 663 | 664 | 665 | 666 | 667 | 668 | 669 | 670 | 671 | 672 | 673 | 674 | 675 | 676 | 677 | 678 | 679 | 680 | 681 | 682 | 683 | 684 | 685 | 686 | 687 | 688 | 689 | 690 | 691 | 692 | 693 | 694 | 695 | 696 | 697 | 698 | 699 | 700 | 701 | 702 | 703 | 704 | 705 | 706 | 707 | 708 | 709 | 710 | 711 | 712 | 713 | 714 | 715 | 716 | 717 | 718 | 719 | 720 | 721 | 722 | 723 | 724 | 725 | 726 | 727 | 728 | 729 | 730 | 731 | 732 | 733 | 734 | 735 | 736 | 737 | 738 | 739 | 740 | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | 751 | 752 | 753 | 754 | 755 | 756 | 757 | 758 | 759 | 760 | 761 | 762 | 763 | 764 | 765 | 766 | 767 | 768 | 769 | 770 | 771 | 772 | 773 | 774 | 775 | 776 | 777 | 778 | 779 | 780 | 781 | 782 | 783 | 784 | 785 | 786 | 787 | 788 | 789 | 790 | 791 | 792 | 793 | 794 | 795 | 796 | 797 | 798 | 799 | 800 | 801 | 802 | 803 | 804 | 805 | 806 | 807 | 808 | 809 | 810 | 811 | 812 | 813 | 814 | 815 | 816 | 817 | 818 | Since Version 6.2.2 text objects can contain more than one line, 819 | which will not be processed correctly with this version. 820 | 821 | 822 | 823 | -------------------------------------------------------------------------------- /Nanite841/Nanite 841 - Minib v1.0.brd: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 5V 122 | RS 123 | B2 124 | A7 125 | A6 126 | A5 127 | A4 128 | A3 129 | A2 130 | A1 131 | A0 132 | GND 133 | + 134 | R3 135 | R3 136 | R1 137 | R2 138 | R4 139 | D1 140 | D2 141 | C1 142 | 143 | 144 | 145 | <h3>SparkFun Electronics' preferred foot prints</h3> 146 | In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> 147 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 148 | <br><br> 149 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 150 | 151 | 152 | 153 | 154 | 155 | 156 | >NAME 157 | >VALUE 158 | 159 | 160 | 161 | 162 | <h3>SparkFun Electronics' preferred foot prints</h3> 163 | In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br> 164 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 165 | <br><br> 166 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 167 | 168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | >NAME 177 | >VALUE 178 | 179 | 180 | 181 | 182 | <h3>SparkFun Electronics' preferred foot prints</h3> 183 | In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> 184 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 185 | <br><br> 186 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 187 | 188 | 189 | 190 | 191 | 192 | 193 | >NAME 194 | >VALUE 195 | 196 | 197 | 198 | 199 | <b>LEDs</b><p> 200 | <author>Created by librarian@cadsoft.de</author><br> 201 | Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED 202 | 203 | 204 | <b>CHIPLED</b><p> 205 | Source: http://www.osram.convergy.de/ ... LG_R971.pdf 206 | 207 | 208 | 209 | 210 | 211 | 212 | 213 | >NAME 214 | >VALUE 215 | 216 | 217 | 218 | 219 | 220 | 221 | 222 | 223 | 224 | 225 | 226 | 227 | 228 | 229 | 230 | 231 | <h3>SparkFun Electronics' preferred foot prints</h3> 232 | In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.<br><br> 233 | We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. 234 | <br><br> 235 | <b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. 236 | 237 | 238 | Sparkfun SKU# COM-08229 239 | 240 | 241 | 242 | 243 | 244 | 245 | 246 | 247 | 248 | 249 | 250 | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | >NAME 261 | >VALUE 262 | 263 | 264 | 265 | 266 | Developed by element14 :<br> 267 | element14 CAD Library consolidation.ulp 268 | at 27/07/2012 14:02:49 269 | 270 | 271 | 272 | 273 | 274 | 275 | 276 | 277 | 278 | 279 | 280 | 281 | 282 | 283 | 284 | 285 | 286 | 287 | 288 | 289 | 290 | 291 | 292 | 293 | 294 | 295 | 296 | 297 | 298 | 299 | 300 | 301 | 302 | 303 | 304 | 305 | 306 | 307 | 308 | 309 | 310 | 311 | 312 | 313 | 314 | 315 | 316 | 317 | 318 | 319 | 320 | 321 | 322 | 323 | 324 | 325 | 326 | 327 | 328 | 329 | 330 | 331 | 332 | 333 | 334 | 335 | 336 | 337 | 338 | 339 | 340 | 341 | 342 | 343 | 344 | 345 | 346 | 347 | 348 | * 349 | 350 | 351 | 352 | 353 | 354 | 355 | * 356 | >NAME 357 | >VALUE 358 | 359 | 360 | 361 | 362 | <h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> 363 | 364 | <p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> 365 | 366 | <h3>Obligatory Warning</h3> 367 | <p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> 368 | 369 | <h3>License</h3> 370 | <p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> 371 | <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 372 | </p> 373 | 374 | 375 | <b>PIN HEADER</b> 376 | 377 | 378 | 379 | 380 | 381 | 382 | 383 | >NAME 384 | >VALUE 385 | 386 | 387 | 388 | 389 | 390 | 391 | 392 | 393 | Surface Mount USB Mini-B Connector 394 | 395 | 396 | 397 | 398 | 399 | 400 | 401 | 402 | 403 | 404 | 405 | 406 | 407 | 408 | 409 | 410 | 411 | 412 | 413 | 414 | 415 | 416 | 417 | 418 | 419 | 420 | 421 | 422 | 423 | 424 | 425 | 426 | 427 | 428 | 429 | 430 | 431 | 432 | 433 | 434 | 435 | 436 | 437 | 438 | 439 | 440 | 441 | 442 | 443 | 444 | 445 | 446 | 447 | 448 | 449 | 450 | 451 | 452 | 453 | 454 | 455 | 456 | 457 | 458 | 459 | 460 | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | 471 | 472 | 473 | 474 | 475 | 476 | 477 | 478 | >NAME 479 | >VALUE 480 | 481 | 482 | 483 | 484 | 485 | 486 | 487 | 488 | 489 | 490 | 491 | 492 | 493 | 494 | 495 | 496 | 497 | 498 | 499 | <b>EAGLE Design Rules</b> 500 | <p> 501 | Die Standard-Design-Rules sind so gewählt, dass sie für 502 | die meisten Anwendungen passen. Sollte ihre Platine 503 | besondere Anforderungen haben, treffen Sie die erforderlichen 504 | Einstellungen hier und speichern die Design Rules unter 505 | einem neuen Namen ab. 506 | <b>Laen's PCB Order Design Rules</b> 507 | <p> 508 | Please make sure your boards conform to these design rules. 509 | 510 | 511 | 512 | 513 | 514 | 515 | 516 | 517 | 518 | 519 | 520 | 521 | 522 | 523 | 524 | 525 | 526 | 527 | 528 | 529 | 530 | 531 | 532 | 533 | 534 | 535 | 536 | 537 | 538 | 539 | 540 | 541 | 542 | 543 | 544 | 545 | 546 | 547 | 548 | 549 | 550 | 551 | 552 | 553 | 554 | 555 | 556 | 557 | 558 | 559 | 560 | 561 | 562 | 563 | 564 | 565 | 566 | 567 | 568 | 569 | 570 | 571 | 572 | 573 | 574 | 575 | 576 | 577 | 578 | 579 | 580 | 581 | 582 | 583 | 584 | 585 | 586 | 587 | 588 | 589 | 590 | 591 | 592 | 593 | 594 | 595 | 596 | 597 | 598 | 599 | 600 | 601 | 602 | 603 | 604 | 605 | 606 | 607 | 608 | 609 | 610 | 611 | 612 | 613 | 614 | 615 | 616 | 617 | 618 | 619 | 620 | 621 | 622 | 623 | 624 | 625 | 626 | 627 | 628 | 629 | 630 | 631 | 632 | 633 | 634 | 635 | 636 | 637 | 638 | 639 | 640 | 641 | 642 | 643 | 644 | 645 | 646 | 647 | 648 | 649 | 650 | 651 | 652 | 653 | 654 | 655 | 656 | 657 | 658 | 659 | 660 | 661 | 662 | 663 | 664 | 665 | 666 | 667 | 668 | 669 | 670 | 671 | 672 | 673 | 674 | 675 | 676 | 677 | 678 | 679 | 680 | 681 | 682 | 683 | 684 | 685 | 686 | 687 | 688 | 689 | 690 | 691 | 692 | 693 | 694 | 695 | 696 | 697 | 698 | 699 | 700 | 701 | 702 | 703 | 704 | 705 | 706 | 707 | 708 | 709 | 710 | 711 | 712 | 713 | 714 | 715 | 716 | 717 | 718 | 719 | 720 | 721 | 722 | 723 | 724 | 725 | 726 | 727 | 728 | 729 | 730 | 731 | 732 | 733 | 734 | 735 | 736 | 737 | 738 | 739 | 740 | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | 751 | 752 | 753 | 754 | 755 | 756 | 757 | 758 | 759 | 760 | 761 | 762 | 763 | 764 | 765 | 766 | 767 | 768 | 769 | 770 | 771 | 772 | 773 | 774 | 775 | 776 | 777 | 778 | 779 | 780 | 781 | 782 | 783 | 784 | 785 | 786 | 787 | 788 | 789 | 790 | 791 | 792 | 793 | 794 | 795 | 796 | 797 | 798 | 799 | 800 | 801 | 802 | 803 | 804 | 805 | 806 | 807 | 808 | 809 | 810 | 811 | 812 | 813 | 814 | 815 | 816 | 817 | 818 | 819 | 820 | 821 | 822 | 823 | 824 | 825 | 826 | 827 | 828 | 829 | 830 | 831 | 832 | 833 | 834 | 835 | 836 | 837 | 838 | 839 | 840 | 841 | 842 | 843 | 844 | 845 | 846 | 847 | 848 | 849 | 850 | 851 | 852 | 853 | 854 | 855 | 856 | 857 | 858 | 859 | 860 | 861 | 862 | 863 | 864 | 865 | 866 | 867 | 868 | 869 | 870 | 871 | 872 | 873 | 874 | 875 | 876 | 877 | 878 | 879 | 880 | 881 | 882 | 883 | 884 | 885 | 886 | 887 | 888 | 889 | 890 | 891 | 892 | 893 | 894 | 895 | 896 | 897 | 898 | 899 | 900 | --------------------------------------------------------------------------------