├── .gitignore
├── CircularZone
├── CircularZone.py
├── CircularZoneDlg.fbp
├── CircularZoneDlg.py
├── __init__.py
├── round_keepout_area.png
└── round_keepout_area.svg
├── LICENSE.md
├── README.md
├── ViaStitching
├── FillArea.py
├── FillAreaAction.py
├── FillAreaDialog.py
├── FillAreaTpl.fbp
├── __init__.py
├── stitching-vias-help.png
├── stitching-vias-help.svg
├── stitching-vias.png
└── stitching-vias.svg
└── images
├── circular1.png
├── circular2.png
├── circular3.png
├── circular4.png
├── via1.png
└── via2.png
/.gitignore:
--------------------------------------------------------------------------------
1 | *.pyc
2 |
--------------------------------------------------------------------------------
/CircularZone/CircularZone.py:
--------------------------------------------------------------------------------
1 | from math import *
2 | import pcbnew
3 | from .CircularZoneDlg import CircularZoneDlg
4 | import wx
5 | import os
6 |
7 |
8 | class CircularZone(pcbnew.ActionPlugin):
9 |
10 | def defaults(self):
11 | self.name = "Circular Zone\nKeepout Zone Generator"
12 | self.category = "Modify PCB"
13 | self.description = "Create a Circular Zone\nor a Circular Keepout Zone"
14 | self.icon_file_name = os.path.join(os.path.dirname(__file__), "./round_keepout_area.png")
15 | self.show_toolbar_button = True
16 |
17 | def build(self, center_x, center_y, radius, keepout, edge_count):
18 | sp = pcbnew.SHAPE_POLY_SET()
19 | sp.NewOutline()
20 | cnt = edge_count
21 | for i in range(cnt):
22 | x = int(center_x + radius * cos(i * 2 * pi / cnt))
23 | y = int(center_y + radius * sin(i * 2 * pi / cnt))
24 | sp.Append(x, y)
25 | # sp.OutlineCount()
26 | sp.thisown = 0
27 | zone = pcbnew.ZONE_CONTAINER(self.pcb)
28 | zone.SetOutline(sp)
29 | zone.SetLayer(pcbnew.F_Cu)
30 | zone.SetIsKeepout(keepout)
31 | zone.thisown = 0
32 | self.pcb.Add(zone)
33 |
34 | def Warn(self, message, caption='Warning!'):
35 | dlg = wx.MessageDialog(
36 | None, message, caption, wx.OK | wx.ICON_WARNING)
37 | dlg.ShowModal()
38 | dlg.Destroy()
39 |
40 | def CheckInput(self, value, data):
41 | val = None
42 | try:
43 | val = int(value)
44 | if val < 1:
45 | raise Exception("Invalid")
46 | except:
47 | self.Warn(
48 | "Invalid parameter for %s: Must be a positive number" % data)
49 | val = None
50 | return val
51 |
52 | def Run(self):
53 | self.pcb = pcbnew.GetBoard()
54 | a = CircularZoneDlg(None)
55 | x = 0
56 | y = 0
57 | reference = None
58 | for module in self.pcb.GetModules():
59 | if module.IsSelected():
60 | x = module.GetPosition().x
61 | y = module.GetPosition().y
62 | reference = module.GetReference()
63 | break
64 | if reference is None:
65 | a.m_comment.SetLabel("No reference position: start at origin")
66 | else:
67 | a.m_comment.SetLabel("Using %s as position reference" % reference)
68 |
69 | a.m_radiusMM.SetValue("10")
70 | modal_result = a.ShowModal()
71 |
72 | segment = self.CheckInput(
73 | a.m_textCtrl_seg.GetValue(), "segment number")
74 | radius = self.CheckInput(a.m_radiusMM.GetValue(), "radius")
75 |
76 | if segment is not None and radius is not None:
77 | if modal_result == wx.ID_OK:
78 | self.build(x, y, pcbnew.FromMM(
79 | radius), a.m_radio_out.GetValue(), segment)
80 | else:
81 | None # Cancel
82 | else:
83 | None # Invalid input
84 | a.Destroy()
85 |
--------------------------------------------------------------------------------
/CircularZone/CircularZoneDlg.fbp:
--------------------------------------------------------------------------------
1 |
2 |
3 |
4 |
945 |
946 |
--------------------------------------------------------------------------------
/CircularZone/CircularZoneDlg.py:
--------------------------------------------------------------------------------
1 | # -*- coding: utf-8 -*-
2 |
3 | ###########################################################################
4 | ## Python code generated with wxFormBuilder (version Dec 21 2016)
5 | ## http://www.wxformbuilder.org/
6 | ##
7 | ## PLEASE DO "NOT" EDIT THIS FILE!
8 | ###########################################################################
9 |
10 | import wx
11 | import wx.xrc
12 |
13 | ###########################################################################
14 | ## Class CircularZoneDlg
15 | ###########################################################################
16 |
17 | class CircularZoneDlg ( wx.Dialog ):
18 |
19 | def __init__( self, parent ):
20 | wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = u"Circular zone parameters", pos = wx.DefaultPosition, size = wx.Size( 373,290 ), style = wx.DEFAULT_DIALOG_STYLE )
21 |
22 | self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
23 |
24 | bSizer3 = wx.BoxSizer( wx.VERTICAL )
25 |
26 | self.m_comment = wx.StaticText( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
27 | self.m_comment.Wrap( -1 )
28 | bSizer3.Add( self.m_comment, 0, wx.ALL|wx.EXPAND, 5 )
29 |
30 | bSizer31 = wx.BoxSizer( wx.HORIZONTAL )
31 |
32 | self.m_staticText3 = wx.StaticText( self, wx.ID_ANY, u"Radius (mm)", wx.DefaultPosition, wx.DefaultSize, 0 )
33 | self.m_staticText3.Wrap( -1 )
34 | bSizer31.Add( self.m_staticText3, 1, wx.ALL|wx.EXPAND, 5 )
35 |
36 | self.m_radiusMM = wx.TextCtrl( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
37 | self.m_radiusMM.SetMinSize( wx.Size( 1000,-1 ) )
38 |
39 | bSizer31.Add( self.m_radiusMM, 1, wx.ALL|wx.EXPAND, 5 )
40 |
41 |
42 | bSizer3.Add( bSizer31, 0, 0, 5 )
43 |
44 | bSizer4 = wx.BoxSizer( wx.HORIZONTAL )
45 |
46 | sbSizer1 = wx.StaticBoxSizer( wx.StaticBox( self, wx.ID_ANY, u"Type of Zone" ), wx.VERTICAL )
47 |
48 | self.m_radio_std = wx.RadioButton( sbSizer1.GetStaticBox(), wx.ID_ANY, u"Standard", wx.DefaultPosition, wx.DefaultSize, 0 )
49 | sbSizer1.Add( self.m_radio_std, 0, wx.ALL|wx.ALIGN_CENTER_VERTICAL|wx.EXPAND, 5 )
50 |
51 | self.m_radio_out = wx.RadioButton( sbSizer1.GetStaticBox(), wx.ID_ANY, u"Keepout", wx.DefaultPosition, wx.DefaultSize, 0 )
52 | sbSizer1.Add( self.m_radio_out, 0, wx.ALL|wx.ALIGN_CENTER_VERTICAL, 5 )
53 |
54 |
55 | bSizer4.Add( sbSizer1, 1, wx.EXPAND, 5 )
56 |
57 | sbSizer2 = wx.StaticBoxSizer( wx.StaticBox( self, wx.ID_ANY, u"Number of segments" ), wx.VERTICAL )
58 |
59 | self.m_textCtrl_seg = wx.TextCtrl( sbSizer2.GetStaticBox(), wx.ID_ANY, u"64", wx.DefaultPosition, wx.DefaultSize, 0 )
60 | sbSizer2.Add( self.m_textCtrl_seg, 0, wx.ALL|wx.EXPAND, 5 )
61 |
62 |
63 | bSizer4.Add( sbSizer2, 1, wx.EXPAND, 5 )
64 |
65 |
66 | bSizer3.Add( bSizer4, 1, wx.EXPAND, 5 )
67 |
68 | bSizer1 = wx.BoxSizer( wx.HORIZONTAL )
69 |
70 | self.m_staticText101 = wx.StaticText( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
71 | self.m_staticText101.Wrap( -1 )
72 | bSizer1.Add( self.m_staticText101, 1, wx.ALL|wx.EXPAND|wx.ALIGN_CENTER_VERTICAL, 5 )
73 |
74 | self.m_button1 = wx.Button( self, wx.ID_OK, u"Create", wx.DefaultPosition, wx.DefaultSize, 0 )
75 | self.m_button1.SetDefault()
76 | bSizer1.Add( self.m_button1, 0, wx.ALL|wx.ALIGN_CENTER_VERTICAL, 5 )
77 |
78 | self.m_button2 = wx.Button( self, wx.ID_CANCEL, u"Cancel", wx.DefaultPosition, wx.DefaultSize, 0 )
79 | bSizer1.Add( self.m_button2, 0, wx.ALL|wx.ALIGN_CENTER_VERTICAL, 5 )
80 |
81 |
82 | bSizer3.Add( bSizer1, 0, wx.ALIGN_RIGHT|wx.EXPAND, 5 )
83 |
84 |
85 | self.SetSizer( bSizer3 )
86 | self.Layout()
87 |
88 | self.Centre( wx.BOTH )
89 |
90 | def __del__( self ):
91 | pass
92 |
93 |
94 |
--------------------------------------------------------------------------------
/CircularZone/__init__.py:
--------------------------------------------------------------------------------
1 | from __future__ import print_function
2 | import pprint
3 | import traceback
4 | import sys
5 |
6 | print("Starting plugin CircularZone")
7 | try:
8 | from .CircularZone import *
9 | CircularZone().register()
10 | except Exception as e:
11 | traceback.print_exc(file=sys.stdout)
12 | pprint.pprint(e)
13 |
--------------------------------------------------------------------------------
/CircularZone/round_keepout_area.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/CircularZone/round_keepout_area.png
--------------------------------------------------------------------------------
/CircularZone/round_keepout_area.svg:
--------------------------------------------------------------------------------
1 |
2 |
217 |
--------------------------------------------------------------------------------
/LICENSE.md:
--------------------------------------------------------------------------------
1 | GNU GENERAL PUBLIC LICENSE
2 | Version 3, 29 June 2007
3 |
4 | Copyright (C) 2007 Free Software Foundation, Inc.
5 | Everyone is permitted to copy and distribute verbatim copies
6 | of this license document, but changing it is not allowed.
7 |
8 | Preamble
9 |
10 | The GNU General Public License is a free, copyleft license for
11 | software and other kinds of works.
12 |
13 | The licenses for most software and other practical works are designed
14 | to take away your freedom to share and change the works. By contrast,
15 | the GNU General Public License is intended to guarantee your freedom to
16 | share and change all versions of a program--to make sure it remains free
17 | software for all its users. We, the Free Software Foundation, use the
18 | GNU General Public License for most of our software; it applies also to
19 | any other work released this way by its authors. You can apply it to
20 | your programs, too.
21 |
22 | When we speak of free software, we are referring to freedom, not
23 | price. Our General Public Licenses are designed to make sure that you
24 | have the freedom to distribute copies of free software (and charge for
25 | them if you wish), that you receive source code or can get it if you
26 | want it, that you can change the software or use pieces of it in new
27 | free programs, and that you know you can do these things.
28 |
29 | To protect your rights, we need to prevent others from denying you
30 | these rights or asking you to surrender the rights. Therefore, you have
31 | certain responsibilities if you distribute copies of the software, or if
32 | you modify it: responsibilities to respect the freedom of others.
33 |
34 | For example, if you distribute copies of such a program, whether
35 | gratis or for a fee, you must pass on to the recipients the same
36 | freedoms that you received. You must make sure that they, too, receive
37 | or can get the source code. And you must show them these terms so they
38 | know their rights.
39 |
40 | Developers that use the GNU GPL protect your rights with two steps:
41 | (1) assert copyright on the software, and (2) offer you this License
42 | giving you legal permission to copy, distribute and/or modify it.
43 |
44 | For the developers' and authors' protection, the GPL clearly explains
45 | that there is no warranty for this free software. For both users' and
46 | authors' sake, the GPL requires that modified versions be marked as
47 | changed, so that their problems will not be attributed erroneously to
48 | authors of previous versions.
49 |
50 | Some devices are designed to deny users access to install or run
51 | modified versions of the software inside them, although the manufacturer
52 | can do so. This is fundamentally incompatible with the aim of
53 | protecting users' freedom to change the software. The systematic
54 | pattern of such abuse occurs in the area of products for individuals to
55 | use, which is precisely where it is most unacceptable. Therefore, we
56 | have designed this version of the GPL to prohibit the practice for those
57 | products. If such problems arise substantially in other domains, we
58 | stand ready to extend this provision to those domains in future versions
59 | of the GPL, as needed to protect the freedom of users.
60 |
61 | Finally, every program is threatened constantly by software patents.
62 | States should not allow patents to restrict development and use of
63 | software on general-purpose computers, but in those that do, we wish to
64 | avoid the special danger that patents applied to a free program could
65 | make it effectively proprietary. To prevent this, the GPL assures that
66 | patents cannot be used to render the program non-free.
67 |
68 | The precise terms and conditions for copying, distribution and
69 | modification follow.
70 |
71 | TERMS AND CONDITIONS
72 |
73 | 0. Definitions.
74 |
75 | "This License" refers to version 3 of the GNU General Public License.
76 |
77 | "Copyright" also means copyright-like laws that apply to other kinds of
78 | works, such as semiconductor masks.
79 |
80 | "The Program" refers to any copyrightable work licensed under this
81 | License. Each licensee is addressed as "you". "Licensees" and
82 | "recipients" may be individuals or organizations.
83 |
84 | To "modify" a work means to copy from or adapt all or part of the work
85 | in a fashion requiring copyright permission, other than the making of an
86 | exact copy. The resulting work is called a "modified version" of the
87 | earlier work or a work "based on" the earlier work.
88 |
89 | A "covered work" means either the unmodified Program or a work based
90 | on the Program.
91 |
92 | To "propagate" a work means to do anything with it that, without
93 | permission, would make you directly or secondarily liable for
94 | infringement under applicable copyright law, except executing it on a
95 | computer or modifying a private copy. Propagation includes copying,
96 | distribution (with or without modification), making available to the
97 | public, and in some countries other activities as well.
98 |
99 | To "convey" a work means any kind of propagation that enables other
100 | parties to make or receive copies. Mere interaction with a user through
101 | a computer network, with no transfer of a copy, is not conveying.
102 |
103 | An interactive user interface displays "Appropriate Legal Notices"
104 | to the extent that it includes a convenient and prominently visible
105 | feature that (1) displays an appropriate copyright notice, and (2)
106 | tells the user that there is no warranty for the work (except to the
107 | extent that warranties are provided), that licensees may convey the
108 | work under this License, and how to view a copy of this License. If
109 | the interface presents a list of user commands or options, such as a
110 | menu, a prominent item in the list meets this criterion.
111 |
112 | 1. Source Code.
113 |
114 | The "source code" for a work means the preferred form of the work
115 | for making modifications to it. "Object code" means any non-source
116 | form of a work.
117 |
118 | A "Standard Interface" means an interface that either is an official
119 | standard defined by a recognized standards body, or, in the case of
120 | interfaces specified for a particular programming language, one that
121 | is widely used among developers working in that language.
122 |
123 | The "System Libraries" of an executable work include anything, other
124 | than the work as a whole, that (a) is included in the normal form of
125 | packaging a Major Component, but which is not part of that Major
126 | Component, and (b) serves only to enable use of the work with that
127 | Major Component, or to implement a Standard Interface for which an
128 | implementation is available to the public in source code form. A
129 | "Major Component", in this context, means a major essential component
130 | (kernel, window system, and so on) of the specific operating system
131 | (if any) on which the executable work runs, or a compiler used to
132 | produce the work, or an object code interpreter used to run it.
133 |
134 | The "Corresponding Source" for a work in object code form means all
135 | the source code needed to generate, install, and (for an executable
136 | work) run the object code and to modify the work, including scripts to
137 | control those activities. However, it does not include the work's
138 | System Libraries, or general-purpose tools or generally available free
139 | programs which are used unmodified in performing those activities but
140 | which are not part of the work. For example, Corresponding Source
141 | includes interface definition files associated with source files for
142 | the work, and the source code for shared libraries and dynamically
143 | linked subprograms that the work is specifically designed to require,
144 | such as by intimate data communication or control flow between those
145 | subprograms and other parts of the work.
146 |
147 | The Corresponding Source need not include anything that users
148 | can regenerate automatically from other parts of the Corresponding
149 | Source.
150 |
151 | The Corresponding Source for a work in source code form is that
152 | same work.
153 |
154 | 2. Basic Permissions.
155 |
156 | All rights granted under this License are granted for the term of
157 | copyright on the Program, and are irrevocable provided the stated
158 | conditions are met. This License explicitly affirms your unlimited
159 | permission to run the unmodified Program. The output from running a
160 | covered work is covered by this License only if the output, given its
161 | content, constitutes a covered work. This License acknowledges your
162 | rights of fair use or other equivalent, as provided by copyright law.
163 |
164 | You may make, run and propagate covered works that you do not
165 | convey, without conditions so long as your license otherwise remains
166 | in force. You may convey covered works to others for the sole purpose
167 | of having them make modifications exclusively for you, or provide you
168 | with facilities for running those works, provided that you comply with
169 | the terms of this License in conveying all material for which you do
170 | not control copyright. Those thus making or running the covered works
171 | for you must do so exclusively on your behalf, under your direction
172 | and control, on terms that prohibit them from making any copies of
173 | your copyrighted material outside their relationship with you.
174 |
175 | Conveying under any other circumstances is permitted solely under
176 | the conditions stated below. Sublicensing is not allowed; section 10
177 | makes it unnecessary.
178 |
179 | 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
180 |
181 | No covered work shall be deemed part of an effective technological
182 | measure under any applicable law fulfilling obligations under article
183 | 11 of the WIPO copyright treaty adopted on 20 December 1996, or
184 | similar laws prohibiting or restricting circumvention of such
185 | measures.
186 |
187 | When you convey a covered work, you waive any legal power to forbid
188 | circumvention of technological measures to the extent such circumvention
189 | is effected by exercising rights under this License with respect to
190 | the covered work, and you disclaim any intention to limit operation or
191 | modification of the work as a means of enforcing, against the work's
192 | users, your or third parties' legal rights to forbid circumvention of
193 | technological measures.
194 |
195 | 4. Conveying Verbatim Copies.
196 |
197 | You may convey verbatim copies of the Program's source code as you
198 | receive it, in any medium, provided that you conspicuously and
199 | appropriately publish on each copy an appropriate copyright notice;
200 | keep intact all notices stating that this License and any
201 | non-permissive terms added in accord with section 7 apply to the code;
202 | keep intact all notices of the absence of any warranty; and give all
203 | recipients a copy of this License along with the Program.
204 |
205 | You may charge any price or no price for each copy that you convey,
206 | and you may offer support or warranty protection for a fee.
207 |
208 | 5. Conveying Modified Source Versions.
209 |
210 | You may convey a work based on the Program, or the modifications to
211 | produce it from the Program, in the form of source code under the
212 | terms of section 4, provided that you also meet all of these conditions:
213 |
214 | a) The work must carry prominent notices stating that you modified
215 | it, and giving a relevant date.
216 |
217 | b) The work must carry prominent notices stating that it is
218 | released under this License and any conditions added under section
219 | 7. This requirement modifies the requirement in section 4 to
220 | "keep intact all notices".
221 |
222 | c) You must license the entire work, as a whole, under this
223 | License to anyone who comes into possession of a copy. This
224 | License will therefore apply, along with any applicable section 7
225 | additional terms, to the whole of the work, and all its parts,
226 | regardless of how they are packaged. This License gives no
227 | permission to license the work in any other way, but it does not
228 | invalidate such permission if you have separately received it.
229 |
230 | d) If the work has interactive user interfaces, each must display
231 | Appropriate Legal Notices; however, if the Program has interactive
232 | interfaces that do not display Appropriate Legal Notices, your
233 | work need not make them do so.
234 |
235 | A compilation of a covered work with other separate and independent
236 | works, which are not by their nature extensions of the covered work,
237 | and which are not combined with it such as to form a larger program,
238 | in or on a volume of a storage or distribution medium, is called an
239 | "aggregate" if the compilation and its resulting copyright are not
240 | used to limit the access or legal rights of the compilation's users
241 | beyond what the individual works permit. Inclusion of a covered work
242 | in an aggregate does not cause this License to apply to the other
243 | parts of the aggregate.
244 |
245 | 6. Conveying Non-Source Forms.
246 |
247 | You may convey a covered work in object code form under the terms
248 | of sections 4 and 5, provided that you also convey the
249 | machine-readable Corresponding Source under the terms of this License,
250 | in one of these ways:
251 |
252 | a) Convey the object code in, or embodied in, a physical product
253 | (including a physical distribution medium), accompanied by the
254 | Corresponding Source fixed on a durable physical medium
255 | customarily used for software interchange.
256 |
257 | b) Convey the object code in, or embodied in, a physical product
258 | (including a physical distribution medium), accompanied by a
259 | written offer, valid for at least three years and valid for as
260 | long as you offer spare parts or customer support for that product
261 | model, to give anyone who possesses the object code either (1) a
262 | copy of the Corresponding Source for all the software in the
263 | product that is covered by this License, on a durable physical
264 | medium customarily used for software interchange, for a price no
265 | more than your reasonable cost of physically performing this
266 | conveying of source, or (2) access to copy the
267 | Corresponding Source from a network server at no charge.
268 |
269 | c) Convey individual copies of the object code with a copy of the
270 | written offer to provide the Corresponding Source. This
271 | alternative is allowed only occasionally and noncommercially, and
272 | only if you received the object code with such an offer, in accord
273 | with subsection 6b.
274 |
275 | d) Convey the object code by offering access from a designated
276 | place (gratis or for a charge), and offer equivalent access to the
277 | Corresponding Source in the same way through the same place at no
278 | further charge. You need not require recipients to copy the
279 | Corresponding Source along with the object code. If the place to
280 | copy the object code is a network server, the Corresponding Source
281 | may be on a different server (operated by you or a third party)
282 | that supports equivalent copying facilities, provided you maintain
283 | clear directions next to the object code saying where to find the
284 | Corresponding Source. Regardless of what server hosts the
285 | Corresponding Source, you remain obligated to ensure that it is
286 | available for as long as needed to satisfy these requirements.
287 |
288 | e) Convey the object code using peer-to-peer transmission, provided
289 | you inform other peers where the object code and Corresponding
290 | Source of the work are being offered to the general public at no
291 | charge under subsection 6d.
292 |
293 | A separable portion of the object code, whose source code is excluded
294 | from the Corresponding Source as a System Library, need not be
295 | included in conveying the object code work.
296 |
297 | A "User Product" is either (1) a "consumer product", which means any
298 | tangible personal property which is normally used for personal, family,
299 | or household purposes, or (2) anything designed or sold for incorporation
300 | into a dwelling. In determining whether a product is a consumer product,
301 | doubtful cases shall be resolved in favor of coverage. For a particular
302 | product received by a particular user, "normally used" refers to a
303 | typical or common use of that class of product, regardless of the status
304 | of the particular user or of the way in which the particular user
305 | actually uses, or expects or is expected to use, the product. A product
306 | is a consumer product regardless of whether the product has substantial
307 | commercial, industrial or non-consumer uses, unless such uses represent
308 | the only significant mode of use of the product.
309 |
310 | "Installation Information" for a User Product means any methods,
311 | procedures, authorization keys, or other information required to install
312 | and execute modified versions of a covered work in that User Product from
313 | a modified version of its Corresponding Source. The information must
314 | suffice to ensure that the continued functioning of the modified object
315 | code is in no case prevented or interfered with solely because
316 | modification has been made.
317 |
318 | If you convey an object code work under this section in, or with, or
319 | specifically for use in, a User Product, and the conveying occurs as
320 | part of a transaction in which the right of possession and use of the
321 | User Product is transferred to the recipient in perpetuity or for a
322 | fixed term (regardless of how the transaction is characterized), the
323 | Corresponding Source conveyed under this section must be accompanied
324 | by the Installation Information. But this requirement does not apply
325 | if neither you nor any third party retains the ability to install
326 | modified object code on the User Product (for example, the work has
327 | been installed in ROM).
328 |
329 | The requirement to provide Installation Information does not include a
330 | requirement to continue to provide support service, warranty, or updates
331 | for a work that has been modified or installed by the recipient, or for
332 | the User Product in which it has been modified or installed. Access to a
333 | network may be denied when the modification itself materially and
334 | adversely affects the operation of the network or violates the rules and
335 | protocols for communication across the network.
336 |
337 | Corresponding Source conveyed, and Installation Information provided,
338 | in accord with this section must be in a format that is publicly
339 | documented (and with an implementation available to the public in
340 | source code form), and must require no special password or key for
341 | unpacking, reading or copying.
342 |
343 | 7. Additional Terms.
344 |
345 | "Additional permissions" are terms that supplement the terms of this
346 | License by making exceptions from one or more of its conditions.
347 | Additional permissions that are applicable to the entire Program shall
348 | be treated as though they were included in this License, to the extent
349 | that they are valid under applicable law. If additional permissions
350 | apply only to part of the Program, that part may be used separately
351 | under those permissions, but the entire Program remains governed by
352 | this License without regard to the additional permissions.
353 |
354 | When you convey a copy of a covered work, you may at your option
355 | remove any additional permissions from that copy, or from any part of
356 | it. (Additional permissions may be written to require their own
357 | removal in certain cases when you modify the work.) You may place
358 | additional permissions on material, added by you to a covered work,
359 | for which you have or can give appropriate copyright permission.
360 |
361 | Notwithstanding any other provision of this License, for material you
362 | add to a covered work, you may (if authorized by the copyright holders of
363 | that material) supplement the terms of this License with terms:
364 |
365 | a) Disclaiming warranty or limiting liability differently from the
366 | terms of sections 15 and 16 of this License; or
367 |
368 | b) Requiring preservation of specified reasonable legal notices or
369 | author attributions in that material or in the Appropriate Legal
370 | Notices displayed by works containing it; or
371 |
372 | c) Prohibiting misrepresentation of the origin of that material, or
373 | requiring that modified versions of such material be marked in
374 | reasonable ways as different from the original version; or
375 |
376 | d) Limiting the use for publicity purposes of names of licensors or
377 | authors of the material; or
378 |
379 | e) Declining to grant rights under trademark law for use of some
380 | trade names, trademarks, or service marks; or
381 |
382 | f) Requiring indemnification of licensors and authors of that
383 | material by anyone who conveys the material (or modified versions of
384 | it) with contractual assumptions of liability to the recipient, for
385 | any liability that these contractual assumptions directly impose on
386 | those licensors and authors.
387 |
388 | All other non-permissive additional terms are considered "further
389 | restrictions" within the meaning of section 10. If the Program as you
390 | received it, or any part of it, contains a notice stating that it is
391 | governed by this License along with a term that is a further
392 | restriction, you may remove that term. If a license document contains
393 | a further restriction but permits relicensing or conveying under this
394 | License, you may add to a covered work material governed by the terms
395 | of that license document, provided that the further restriction does
396 | not survive such relicensing or conveying.
397 |
398 | If you add terms to a covered work in accord with this section, you
399 | must place, in the relevant source files, a statement of the
400 | additional terms that apply to those files, or a notice indicating
401 | where to find the applicable terms.
402 |
403 | Additional terms, permissive or non-permissive, may be stated in the
404 | form of a separately written license, or stated as exceptions;
405 | the above requirements apply either way.
406 |
407 | 8. Termination.
408 |
409 | You may not propagate or modify a covered work except as expressly
410 | provided under this License. Any attempt otherwise to propagate or
411 | modify it is void, and will automatically terminate your rights under
412 | this License (including any patent licenses granted under the third
413 | paragraph of section 11).
414 |
415 | However, if you cease all violation of this License, then your
416 | license from a particular copyright holder is reinstated (a)
417 | provisionally, unless and until the copyright holder explicitly and
418 | finally terminates your license, and (b) permanently, if the copyright
419 | holder fails to notify you of the violation by some reasonable means
420 | prior to 60 days after the cessation.
421 |
422 | Moreover, your license from a particular copyright holder is
423 | reinstated permanently if the copyright holder notifies you of the
424 | violation by some reasonable means, this is the first time you have
425 | received notice of violation of this License (for any work) from that
426 | copyright holder, and you cure the violation prior to 30 days after
427 | your receipt of the notice.
428 |
429 | Termination of your rights under this section does not terminate the
430 | licenses of parties who have received copies or rights from you under
431 | this License. If your rights have been terminated and not permanently
432 | reinstated, you do not qualify to receive new licenses for the same
433 | material under section 10.
434 |
435 | 9. Acceptance Not Required for Having Copies.
436 |
437 | You are not required to accept this License in order to receive or
438 | run a copy of the Program. Ancillary propagation of a covered work
439 | occurring solely as a consequence of using peer-to-peer transmission
440 | to receive a copy likewise does not require acceptance. However,
441 | nothing other than this License grants you permission to propagate or
442 | modify any covered work. These actions infringe copyright if you do
443 | not accept this License. Therefore, by modifying or propagating a
444 | covered work, you indicate your acceptance of this License to do so.
445 |
446 | 10. Automatic Licensing of Downstream Recipients.
447 |
448 | Each time you convey a covered work, the recipient automatically
449 | receives a license from the original licensors, to run, modify and
450 | propagate that work, subject to this License. You are not responsible
451 | for enforcing compliance by third parties with this License.
452 |
453 | An "entity transaction" is a transaction transferring control of an
454 | organization, or substantially all assets of one, or subdividing an
455 | organization, or merging organizations. If propagation of a covered
456 | work results from an entity transaction, each party to that
457 | transaction who receives a copy of the work also receives whatever
458 | licenses to the work the party's predecessor in interest had or could
459 | give under the previous paragraph, plus a right to possession of the
460 | Corresponding Source of the work from the predecessor in interest, if
461 | the predecessor has it or can get it with reasonable efforts.
462 |
463 | You may not impose any further restrictions on the exercise of the
464 | rights granted or affirmed under this License. For example, you may
465 | not impose a license fee, royalty, or other charge for exercise of
466 | rights granted under this License, and you may not initiate litigation
467 | (including a cross-claim or counterclaim in a lawsuit) alleging that
468 | any patent claim is infringed by making, using, selling, offering for
469 | sale, or importing the Program or any portion of it.
470 |
471 | 11. Patents.
472 |
473 | A "contributor" is a copyright holder who authorizes use under this
474 | License of the Program or a work on which the Program is based. The
475 | work thus licensed is called the contributor's "contributor version".
476 |
477 | A contributor's "essential patent claims" are all patent claims
478 | owned or controlled by the contributor, whether already acquired or
479 | hereafter acquired, that would be infringed by some manner, permitted
480 | by this License, of making, using, or selling its contributor version,
481 | but do not include claims that would be infringed only as a
482 | consequence of further modification of the contributor version. For
483 | purposes of this definition, "control" includes the right to grant
484 | patent sublicenses in a manner consistent with the requirements of
485 | this License.
486 |
487 | Each contributor grants you a non-exclusive, worldwide, royalty-free
488 | patent license under the contributor's essential patent claims, to
489 | make, use, sell, offer for sale, import and otherwise run, modify and
490 | propagate the contents of its contributor version.
491 |
492 | In the following three paragraphs, a "patent license" is any express
493 | agreement or commitment, however denominated, not to enforce a patent
494 | (such as an express permission to practice a patent or covenant not to
495 | sue for patent infringement). To "grant" such a patent license to a
496 | party means to make such an agreement or commitment not to enforce a
497 | patent against the party.
498 |
499 | If you convey a covered work, knowingly relying on a patent license,
500 | and the Corresponding Source of the work is not available for anyone
501 | to copy, free of charge and under the terms of this License, through a
502 | publicly available network server or other readily accessible means,
503 | then you must either (1) cause the Corresponding Source to be so
504 | available, or (2) arrange to deprive yourself of the benefit of the
505 | patent license for this particular work, or (3) arrange, in a manner
506 | consistent with the requirements of this License, to extend the patent
507 | license to downstream recipients. "Knowingly relying" means you have
508 | actual knowledge that, but for the patent license, your conveying the
509 | covered work in a country, or your recipient's use of the covered work
510 | in a country, would infringe one or more identifiable patents in that
511 | country that you have reason to believe are valid.
512 |
513 | If, pursuant to or in connection with a single transaction or
514 | arrangement, you convey, or propagate by procuring conveyance of, a
515 | covered work, and grant a patent license to some of the parties
516 | receiving the covered work authorizing them to use, propagate, modify
517 | or convey a specific copy of the covered work, then the patent license
518 | you grant is automatically extended to all recipients of the covered
519 | work and works based on it.
520 |
521 | A patent license is "discriminatory" if it does not include within
522 | the scope of its coverage, prohibits the exercise of, or is
523 | conditioned on the non-exercise of one or more of the rights that are
524 | specifically granted under this License. You may not convey a covered
525 | work if you are a party to an arrangement with a third party that is
526 | in the business of distributing software, under which you make payment
527 | to the third party based on the extent of your activity of conveying
528 | the work, and under which the third party grants, to any of the
529 | parties who would receive the covered work from you, a discriminatory
530 | patent license (a) in connection with copies of the covered work
531 | conveyed by you (or copies made from those copies), or (b) primarily
532 | for and in connection with specific products or compilations that
533 | contain the covered work, unless you entered into that arrangement,
534 | or that patent license was granted, prior to 28 March 2007.
535 |
536 | Nothing in this License shall be construed as excluding or limiting
537 | any implied license or other defenses to infringement that may
538 | otherwise be available to you under applicable patent law.
539 |
540 | 12. No Surrender of Others' Freedom.
541 |
542 | If conditions are imposed on you (whether by court order, agreement or
543 | otherwise) that contradict the conditions of this License, they do not
544 | excuse you from the conditions of this License. If you cannot convey a
545 | covered work so as to satisfy simultaneously your obligations under this
546 | License and any other pertinent obligations, then as a consequence you may
547 | not convey it at all. For example, if you agree to terms that obligate you
548 | to collect a royalty for further conveying from those to whom you convey
549 | the Program, the only way you could satisfy both those terms and this
550 | License would be to refrain entirely from conveying the Program.
551 |
552 | 13. Use with the GNU Affero General Public License.
553 |
554 | Notwithstanding any other provision of this License, you have
555 | permission to link or combine any covered work with a work licensed
556 | under version 3 of the GNU Affero General Public License into a single
557 | combined work, and to convey the resulting work. The terms of this
558 | License will continue to apply to the part which is the covered work,
559 | but the special requirements of the GNU Affero General Public License,
560 | section 13, concerning interaction through a network will apply to the
561 | combination as such.
562 |
563 | 14. Revised Versions of this License.
564 |
565 | The Free Software Foundation may publish revised and/or new versions of
566 | the GNU General Public License from time to time. Such new versions will
567 | be similar in spirit to the present version, but may differ in detail to
568 | address new problems or concerns.
569 |
570 | Each version is given a distinguishing version number. If the
571 | Program specifies that a certain numbered version of the GNU General
572 | Public License "or any later version" applies to it, you have the
573 | option of following the terms and conditions either of that numbered
574 | version or of any later version published by the Free Software
575 | Foundation. If the Program does not specify a version number of the
576 | GNU General Public License, you may choose any version ever published
577 | by the Free Software Foundation.
578 |
579 | If the Program specifies that a proxy can decide which future
580 | versions of the GNU General Public License can be used, that proxy's
581 | public statement of acceptance of a version permanently authorizes you
582 | to choose that version for the Program.
583 |
584 | Later license versions may give you additional or different
585 | permissions. However, no additional obligations are imposed on any
586 | author or copyright holder as a result of your choosing to follow a
587 | later version.
588 |
589 | 15. Disclaimer of Warranty.
590 |
591 | THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
592 | APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
593 | HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
594 | OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
595 | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
596 | PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
597 | IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
598 | ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
599 |
600 | 16. Limitation of Liability.
601 |
602 | IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
603 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
604 | THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
605 | GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
606 | USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
607 | DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
608 | PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
609 | EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
610 | SUCH DAMAGES.
611 |
612 | 17. Interpretation of Sections 15 and 16.
613 |
614 | If the disclaimer of warranty and limitation of liability provided
615 | above cannot be given local legal effect according to their terms,
616 | reviewing courts shall apply local law that most closely approximates
617 | an absolute waiver of all civil liability in connection with the
618 | Program, unless a warranty or assumption of liability accompanies a
619 | copy of the Program in return for a fee.
620 |
621 | END OF TERMS AND CONDITIONS
622 |
623 | How to Apply These Terms to Your New Programs
624 |
625 | If you develop a new program, and you want it to be of the greatest
626 | possible use to the public, the best way to achieve this is to make it
627 | free software which everyone can redistribute and change under these terms.
628 |
629 | To do so, attach the following notices to the program. It is safest
630 | to attach them to the start of each source file to most effectively
631 | state the exclusion of warranty; and each file should have at least
632 | the "copyright" line and a pointer to where the full notice is found.
633 |
634 | {one line to give the program's name and a brief idea of what it does.}
635 | Copyright (C) {year} {name of author}
636 |
637 | This program is free software: you can redistribute it and/or modify
638 | it under the terms of the GNU General Public License as published by
639 | the Free Software Foundation, either version 3 of the License, or
640 | (at your option) any later version.
641 |
642 | This program is distributed in the hope that it will be useful,
643 | but WITHOUT ANY WARRANTY; without even the implied warranty of
644 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
645 | GNU General Public License for more details.
646 |
647 | You should have received a copy of the GNU General Public License
648 | along with this program. If not, see .
649 |
650 | Also add information on how to contact you by electronic and paper mail.
651 |
652 | If the program does terminal interaction, make it output a short
653 | notice like this when it starts in an interactive mode:
654 |
655 | {project} Copyright (C) {year} {fullname}
656 | This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
657 | This is free software, and you are welcome to redistribute it
658 | under certain conditions; type `show c' for details.
659 |
660 | The hypothetical commands `show w' and `show c' should show the appropriate
661 | parts of the General Public License. Of course, your program's commands
662 | might be different; for a GUI interface, you would use an "about box".
663 |
664 | You should also get your employer (if you work as a programmer) or school,
665 | if any, to sign a "copyright disclaimer" for the program, if necessary.
666 | For more information on this, and how to apply and follow the GNU GPL, see
667 | .
668 |
669 | The GNU General Public License does not permit incorporating your program
670 | into proprietary programs. If your program is a subroutine library, you
671 | may consider it more useful to permit linking proprietary applications with
672 | the library. If this is what you want to do, use the GNU Lesser General
673 | Public License instead of this License. But first, please read
674 | .
675 |
--------------------------------------------------------------------------------
/README.md:
--------------------------------------------------------------------------------
1 | # Some KiCad plugins in Python
2 |
3 | Thoses plugins must be copied inside KiCad's python plugins
4 | directory (~/.kicad_plugins or /usr/share/kicad/scripting/plugins/ for
5 | Linux).
6 | Most of them use python plugin (Action plugins) in KiCad. This feature
7 | is enabled in daily builds of KiCad.
8 | See https://forum.kicad.info/t/howto-register-a-python-plugin-inside-pcbnew-tools-menu/5540
9 |
10 |
11 | ## ViaStitching
12 |
13 | A pure python via stitching.
14 |
15 | After select "Via Stitching" in Tools menu, choose your options in the
16 | interface.
17 |
18 | 
19 |
20 | Then the result should be:
21 |
22 | 
23 |
24 | ## CircularZone
25 |
26 | A pure python script to create circular zone.
27 |
28 | Select a component. This composent will be used as center of the
29 | circular zone. If no component is selected, the origin (0,0) will be
30 | used as center.
31 |
32 | After select "Create a circular zone" in the Tools menu, choose the
33 | radius and the type of zone (normal or keep out).
34 |
35 | 
36 |
37 | A circular zone will be created. Select it to change properties:
38 |
39 | 
40 |
41 | 
42 |
43 | Refill the area (B hotkey) then the circular zone is ready.
44 |
45 | 
46 |
--------------------------------------------------------------------------------
/ViaStitching/FillArea.py:
--------------------------------------------------------------------------------
1 | #!/usr/bin/python
2 | # -*- coding: utf-8 -*-
3 | #
4 | # FillArea.py
5 | #
6 | # Copyright 2017 JS Reynaud
7 | #
8 | # This program is free software; you can redistribute it and/or modify
9 | # it under the terms of the GNU General Public License as published by
10 | # the Free Software Foundation; either version 2 of the License, or
11 | # (at your option) any later version.
12 | #
13 | # This program is distributed in the hope that it will be useful,
14 | # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 | # GNU General Public License for more details.
17 | #
18 | # You should have received a copy of the GNU General Public License
19 | # along with this program; if not, write to the Free Software
20 | # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
21 | # MA 02110-1301, USA.
22 |
23 | from __future__ import print_function
24 | from pcbnew import *
25 | import sys
26 | import tempfile
27 | import shutil
28 | import os
29 | import random
30 | import pprint
31 | import wx
32 |
33 |
34 | def wxPrint(msg):
35 | wx.LogMessage(msg)
36 |
37 |
38 | #
39 | if sys.version[0] == '2': # maui
40 | xrange
41 | else:
42 | xrange = range
43 |
44 |
45 | """
46 | # This script fills all areas of a specific net with Vias (Via Stitching)
47 | #
48 | #
49 | # Usage in pcbnew's python console:
50 | # First you neet to copy this file (named FillArea.py) in your kicad_plugins
51 | # directory (~/.kicad_plugins/ on Linux)
52 | # Launch pcbnew and open python console (last entry of Tools menu)
53 | # Then enter the following line (one by one, Hit enter after each)
54 | import FillArea
55 | FillArea.FillArea().Run()
56 |
57 |
58 | # Other example:
59 | # You can add modifications to parameters by adding functions calls:
60 | FillArea.FillArea().SetDebug().SetNetname("GND").SetStepMM(1.27).SetSizeMM(0.6).SetDrillMM(0.3).SetClearanceMM(0.2).Run()
61 |
62 | # with
63 | # SetDebug: Activate debug mode (print evolution of the board in ascii art)
64 | # SetNetname: Change the netname to consider for the filling
65 | # (default is /GND or fallback to GND)
66 | # SetStepMM: Change step between Via (in mm)
67 | # SetSizeMM: Change Via copper size (in mm)
68 | # SetDrillMM: Change Via drill hole size (in mm)
69 | # SetClearanceMM: Change clearance for Via (in mm)
70 |
71 | # You can also use it in command line. In this case, the first parameter is
72 | # the pcb file path. Default options are applied.
73 |
74 | """
75 |
76 |
77 | class ViaObject:
78 |
79 | """
80 | ViaObject holds all information of a single Via
81 | """
82 |
83 | def __init__(self, x, y, pos_x, pos_y):
84 | self.X = x
85 | self.Y = y
86 | self.PosX = pos_x
87 | self.PosY = pos_y
88 |
89 |
90 | class FillArea:
91 |
92 | """
93 | Automaticaly add via on area where there are no track/existing via,
94 | pads and keepout areas
95 | """
96 |
97 | REASON_OK = 0
98 | REASON_NO_SIGNAL = 1
99 | REASON_OTHER_SIGNAL = 2
100 | REASON_KEEPOUT = 3
101 | REASON_TRACK = 4
102 | REASON_PAD = 5
103 | REASON_DRAWING = 6
104 | REASON_STEP = 7
105 |
106 | def __init__(self, filename=None):
107 | self.filename = None
108 | self.clearance = 0
109 | # Net name to use
110 | self.SetPCB(GetBoard())
111 | # Set the filename
112 | self.SetFile(filename)
113 | # Step between via
114 | self.SetStepMM(2.54)
115 | # Size of the via (diameter of copper)
116 | self.SetSizeMM(0.46)
117 | # Size of the drill (diameter)
118 | self.SetDrillMM(0.20)
119 | # Isolation between via and other elements
120 | # ie: radius from the border of the via
121 | self.SetClearanceMM(0.2)
122 | self.only_selected_area = False
123 | self.delete_vias = False
124 | if self.pcb is not None:
125 | for lnet in ["GND", "/GND"]:
126 | if self.pcb.FindNet(lnet) is not None:
127 | self.SetNetname(lnet)
128 | break
129 | self.netname = None
130 | self.debug = False
131 | self.random = False
132 | self.star = False
133 | if self.netname is None:
134 | self.SetNetname("GND")
135 |
136 | self.tmp_dir = None
137 |
138 | def SetFile(self, filename):
139 | self.filename = filename
140 | if self.filename:
141 | self.SetPCB(LoadBoard(self.filename))
142 |
143 | def SetDebug(self):
144 | wxPrint("Set debug")
145 | self.debug = True
146 | return self
147 |
148 | def SetRandom(self, r):
149 | random.seed()
150 | self.random = r
151 | return self
152 |
153 | def SetStar(self):
154 | self.star = True
155 | return self
156 |
157 | def SetPCB(self, pcb):
158 | self.pcb = pcb
159 | if self.pcb is not None:
160 | self.pcb.BuildListOfNets()
161 | return self
162 |
163 | def SetNetname(self, netname):
164 | self.netname = netname # .upper()
165 | # wx.LogMessage(self.netname)
166 | return self
167 |
168 | def SetStepMM(self, s):
169 | self.step = float(FromMM(s))
170 | return self
171 |
172 | def SetSizeMM(self, s):
173 | self.size = float(FromMM(s))
174 | return self
175 |
176 | def SetDrillMM(self, s):
177 | self.drill = float(FromMM(s))
178 | return self
179 |
180 | def OnlyOnSelectedArea(self):
181 | self.only_selected_area = True
182 | return self
183 |
184 | def DeleteVias(self):
185 | self.delete_vias = True
186 | return self
187 |
188 | def SetClearanceMM(self, s):
189 | self.clearance = float(FromMM(s))
190 | return self
191 |
192 | def GetReasonSymbol(self, reason):
193 | if isinstance(reason, ViaObject):
194 | return "X"
195 | if reason == self.REASON_NO_SIGNAL:
196 | return " "
197 | if reason == self.REASON_OTHER_SIGNAL:
198 | return "O"
199 | if reason == self.REASON_KEEPOUT:
200 | return "K"
201 | if reason == self.REASON_TRACK:
202 | return "T"
203 | if reason == self.REASON_PAD:
204 | return "P"
205 | if reason == self.REASON_DRAWING:
206 | return "D"
207 | if reason == self.REASON_STEP:
208 | return "-"
209 |
210 | return str(reason)
211 |
212 | def PrintRect(self, rectangle):
213 | """debuging tool
214 | Print board in ascii art
215 | """
216 | print("_" * (len(rectangle)+2))
217 | for y in range(len(rectangle[0])):
218 | print("|", end='')
219 | for x in range(len(rectangle)):
220 | print("%s" % self.GetReasonSymbol(rectangle[x][y]), end='')
221 | print("|")
222 | print("_" * (len(rectangle)+2))
223 | print('''
224 | OK = 'X'
225 | NO_SIGNAL = ' '
226 | OTHER_SIGNAL = 'O'
227 | KEEPOUT = 'K'
228 | TRACK = 'T'
229 | PAD = 'P'
230 | DRAWING = 'D'
231 | STEP = '-'
232 | ''')
233 |
234 | def AddVia(self, position, x, y):
235 | m = VIA(self.pcb)
236 | m.SetPosition(position)
237 | m.SetNet(self.pcb.FindNet(self.netname))
238 | m.SetViaType(VIA_THROUGH)
239 | m.SetDrill(int(self.drill))
240 | m.SetWidth(int(self.size))
241 | # again possible to mark via as own since no timestamp_t binding kicad v5.1.4
242 | m.SetTimeStamp(33) # USE 33 as timestamp to mark this via as generated by this script
243 | #wx.LogMessage('adding vias')
244 | self.pcb.Add(m)
245 |
246 | def RefillBoardAreas(self):
247 | for i in range(self.pcb.GetAreaCount()):
248 | area = self.pcb.GetArea(i)
249 | area.ClearFilledPolysList()
250 | area.UnFill()
251 | filler = ZONE_FILLER(self.pcb)
252 | filler.Fill(self.pcb.Zones())
253 |
254 | def CheckViaInAllAreas(self, via, all_areas):
255 | '''
256 | Checks if an existing Via collides with another area
257 | '''
258 | # Enum all area
259 | for area in all_areas:
260 | area_layer = area.GetLayer()
261 | area_clearance = area.GetClearance()
262 | area_priority = area.GetPriority()
263 | is_keepout_area = area.GetIsKeepout()
264 | is_target_net = (area.GetNetname() == self.netname) # (area.GetNetname().upper() == self.netname)
265 | # wx.LogMessage(area.GetNetname()) #wx.LogMessage(area.GetNetname().upper())
266 |
267 | if (not is_target_net): # Only process areas that are not in the target net
268 | # Offset is half the size of the via plus the clearance of the via or the area
269 | offset = max(self.clearance, area_clearance) + self.size / 2
270 | for dx in [-offset, offset]:
271 | # All 4 corners of the via are testet (upper, lower, left, right) but not the center
272 | for dy in [-offset, offset]:
273 | point_to_test = wxPoint(via.PosX + dx, via.PosY + dy)
274 |
275 | hit_test_area = area.HitTestFilledArea(point_to_test) # Collides with a filled area
276 | hit_test_edge = area.HitTestForEdge(point_to_test, 1) # Collides with an edge/corner
277 | try:
278 | hit_test_zone = area.HitTestInsideZone(point_to_test) # Is inside a zone (e.g. KeepOut)
279 | except:
280 | hit_test_zone = False
281 | wxPrint('exception: missing HitTestInsideZone: To Be Fixed')
282 | # hit_test_zone = area.HitTest(point_to_test) # Is inside a zone (e.g. KeepOut) kicad nightly 5.99
283 | if is_keepout_area and (hit_test_area or hit_test_edge or hit_test_zone):
284 | return self.REASON_KEEPOUT # Collides with keepout
285 |
286 | elif (hit_test_area or hit_test_edge):
287 | # Collides with another signal (e.g. on another layer)
288 | return self.REASON_OTHER_SIGNAL
289 |
290 | elif hit_test_zone:
291 | # Check if the zone is higher priority than other zones of the target net in the same point
292 | #target_areas_on_same_layer = filter(lambda x: ((x.GetPriority() > area_priority) and (x.GetLayer() == area_layer) and (x.GetNetname().upper() == self.netname)), all_areas)
293 | target_areas_on_same_layer = filter(lambda x: ((x.GetPriority() > area_priority) and (
294 | x.GetLayer() == area_layer) and (x.GetNetname() == self.netname)), all_areas)
295 | for area_with_higher_priority in target_areas_on_same_layer:
296 | if area_with_higher_priority.HitTestInsideZone(point_to_test):
297 | break # Area of target net has higher priority on this layer
298 | else:
299 | # Collides with another signal (e.g. on another layer)
300 | return self.REASON_OTHER_SIGNAL
301 |
302 | return self.REASON_OK
303 |
304 | def ClearViaInStepSize(self, rectangle, x, y, distance):
305 | '''
306 | Stepsize==0
307 | O O O O O O O O O
308 | O O O O O O O O O
309 | O O O O O O O O O
310 | O O O O O O O O O
311 | O O O O O O O O O
312 | O O O O O O O O O
313 | O O O O O O O O O
314 |
315 | Standard
316 | O O O O O
317 |
318 | O O O O O
319 |
320 | O O O O O
321 |
322 | O O O O O
323 |
324 | Star
325 | O O O O O
326 | O O O O
327 | O O O O O
328 | O O O O
329 | O O O O O
330 | O O O O
331 | O O O O O
332 | '''
333 | for x_pos in range(x-distance, x+distance+1):
334 | if (x_pos >= 0) and (x_pos < len(rectangle)):
335 | distance_y = distance-abs(x-x_pos) if self.star else distance # Star or Standard shape
336 | for y_pos in range(y-distance_y, y+distance_y+1):
337 | if (y_pos >= 0) and (y_pos < len(rectangle[0])):
338 | if (x_pos == x) and (y_pos == y):
339 | continue
340 | rectangle[x_pos][y_pos] = self.REASON_STEP
341 |
342 | def Run(self):
343 | """
344 | Launch the process
345 | """
346 | target_tracks = self.pcb.GetTracks()
347 |
348 | if self.delete_vias:
349 | # timestmap again available
350 | #target_tracks = filter(lambda x: (x.GetNetname().upper() == self.netname), self.pcb.GetTracks())
351 | target_tracks = filter(lambda x: (x.GetNetname() == self.netname), self.pcb.GetTracks())
352 | target_tracks_cp = list(target_tracks)
353 | l = len (target_tracks_cp)
354 | for i in range(l):
355 | if target_tracks_cp[i].Type() == PCB_VIA_T:
356 | if target_tracks_cp[i].GetTimeStamp() == 33:
357 | self.pcb.RemoveNative(target_tracks_cp[i])
358 | self.RefillBoardAreas()
359 | return # no need to run the rest of logic
360 |
361 | lboard = self.pcb.ComputeBoundingBox(False)
362 | origin = lboard.GetPosition()
363 |
364 | # Create an initial rectangle: all is set to "REASON_NO_SIGNAL"
365 | # get a margin to avoid out of range
366 | l_clearance = self.clearance + self.size
367 | x_limit = int((lboard.GetWidth() + l_clearance) / l_clearance) + 1
368 | y_limit = int((lboard.GetHeight() + l_clearance) / l_clearance) + 1
369 |
370 | rectangle = [[self.REASON_NO_SIGNAL]*y_limit for i in xrange(x_limit)]
371 |
372 | all_pads = self.pcb.GetPads()
373 | all_tracks = self.pcb.GetTracks()
374 | try:
375 | all_drawings = filter(lambda x: x.GetClass() == 'PTEXT' and self.pcb.GetLayerID(
376 | x.GetLayerName()) in (F_Cu, B_Cu), self.pcb.DrawingsList())
377 | except:
378 | all_drawings = filter(lambda x: x.GetClass() == 'PTEXT' and self.pcb.GetLayerID(
379 | x.GetLayerName()) in (F_Cu, B_Cu), self.pcb.Drawings())
380 | #wxPrint("exception on missing BOARD.DrawingsList")
381 | all_areas = [self.pcb.GetArea(i) for i in xrange(self.pcb.GetAreaCount())]
382 | # target_areas = filter(lambda x: (x.GetNetname().upper() == self.netname), all_areas) # KeepOuts are filtered because they have no name
383 | # KeepOuts are filtered because they have no name
384 | target_areas = filter(lambda x: (x.GetNetname() == self.netname), all_areas)
385 |
386 | via_list = [] # Create a list of existing vias => faster than scanning through the whole rectangle
387 | max_target_area_clearance = 0
388 |
389 | # Enum all target areas (Search possible positions for vias on the target net)
390 | for area in target_areas:
391 | wxPrint("Processing Target Area: %s, LayerName: %s..." % (area.GetNetname(), area.GetLayerName()))
392 |
393 | is_selected_area = area.IsSelected()
394 | area_clearance = area.GetClearance()
395 | if max_target_area_clearance < area_clearance:
396 | max_target_area_clearance = area_clearance
397 |
398 | if (not self.only_selected_area) or (self.only_selected_area and is_selected_area): # All areas or only the selected area
399 | # Check every possible point in the virtual coordinate system
400 | for x in xrange(len(rectangle)):
401 | for y in xrange(len(rectangle[0])):
402 | # No other "target area" found yet => go on with processing
403 | if rectangle[x][y] == self.REASON_NO_SIGNAL:
404 | current_x = origin.x + (x * l_clearance) # Center of the via
405 | current_y = origin.y + (y * l_clearance)
406 |
407 | test_result = True # Start with true, if a check fails, it is set to false
408 |
409 | # Offset is half the size of the via plus the clearance of the via or the area
410 | offset = max(self.clearance, area_clearance) + self.size / 2
411 | for dx in [-offset, offset]:
412 | # All 4 corners of the via are testet (upper, lower, left, right) but not the center
413 | for dy in [-offset, offset]:
414 | point_to_test = wxPoint(current_x + dx, current_y + dy)
415 | hit_test_area = area.HitTestFilledArea(point_to_test) # Collides with a filled area
416 | # Collides with an edge/corner
417 | hit_test_edge = area.HitTestForEdge(point_to_test, area_clearance)
418 |
419 | # test_result only remains true if the via is inside an area and not on an edge
420 | test_result &= (hit_test_area and not hit_test_edge)
421 |
422 | if test_result:
423 | # Create a via object with information about the via and place it in the rectangle
424 | via_obj = ViaObject(x=x, y=y, pos_x=current_x, pos_y=current_y)
425 | rectangle[x][y] = via_obj
426 | via_list.append(via_obj)
427 |
428 | if self.debug:
429 | wxPrint("\nPost target areas:")
430 | self.PrintRect(rectangle)
431 |
432 | # Enum all vias
433 | wxPrint("Processing all vias of target area...")
434 | for via in via_list:
435 | reason = self.CheckViaInAllAreas(via, all_areas)
436 | if reason != self.REASON_OK:
437 | rectangle[via.X][via.Y] = reason
438 |
439 | if self.debug:
440 | wxPrint("\nPost areas:")
441 | self.PrintRect(rectangle)
442 |
443 | # Same job with all pads => all pads on all layers
444 | wxPrint("Processing all pads...")
445 | for pad in all_pads:
446 | local_offset = max(pad.GetClearance(), self.clearance, max_target_area_clearance) + (self.size / 2)
447 | max_size = max(pad.GetSize().x, pad.GetSize().y)
448 |
449 | start_x = int(floor(((pad.GetPosition().x - (max_size / 2.0 + local_offset)) - origin.x) / l_clearance))
450 | stop_x = int(ceil(((pad.GetPosition().x + (max_size / 2.0 + local_offset)) - origin.x) / l_clearance))
451 |
452 | start_y = int(floor(((pad.GetPosition().y - (max_size / 2.0 + local_offset)) - origin.y) / l_clearance))
453 | stop_y = int(ceil(((pad.GetPosition().y + (max_size / 2.0 + local_offset)) - origin.y) / l_clearance))
454 |
455 | for x in range(start_x, stop_x + 1):
456 | for y in range(start_y, stop_y + 1):
457 | try:
458 | if isinstance(rectangle[x][y], ViaObject):
459 | start_rect = wxPoint(origin.x + (l_clearance * x) - local_offset,
460 | origin.y + (l_clearance * y) - local_offset)
461 | size_rect = wxSize(2 * local_offset, 2 * local_offset)
462 | if pad.HitTest(EDA_RECT(start_rect, size_rect), False):
463 | rectangle[x][y] = self.REASON_PAD
464 | except:
465 | wxPrint("exception on Processing all pads...")
466 | if self.debug:
467 | wxPrint("\nPost pads:")
468 | self.PrintRect(rectangle)
469 |
470 | # Same job with tracks => all tracks on all layers
471 | wxPrint("Processing all tracks...")
472 | for track in all_tracks:
473 | start_x = track.GetStart().x
474 | start_y = track.GetStart().y
475 |
476 | stop_x = track.GetEnd().x
477 | stop_y = track.GetEnd().y
478 |
479 | if start_x > stop_x:
480 | d = stop_x
481 | stop_x = start_x
482 | start_x = d
483 |
484 | if start_y > stop_y:
485 | d = stop_y
486 | stop_y = start_y
487 | start_y = d
488 |
489 | osx = start_x
490 | osy = start_y
491 | opx = stop_x
492 | opy = stop_y
493 |
494 | clearance = max(track.GetClearance(), self.clearance, max_target_area_clearance) + (self.size / 2) + (track.GetWidth() / 2)
495 |
496 | start_x = int(floor(((start_x - clearance) - origin.x) / l_clearance))
497 | stop_x = int(ceil(((stop_x + clearance) - origin.x) / l_clearance))
498 |
499 | start_y = int(floor(((start_y - clearance) - origin.y) / l_clearance))
500 | stop_y = int(ceil(((stop_y + clearance) - origin.y) / l_clearance))
501 |
502 | for x in range(start_x, stop_x + 1):
503 | for y in range(start_y, stop_y + 1):
504 | try:
505 | if isinstance(rectangle[x][y], ViaObject):
506 | start_rect = wxPoint(origin.x + (l_clearance * x) - clearance,
507 | origin.y + (l_clearance * y) - clearance)
508 | size_rect = wxSize(2 * clearance, 2 * clearance)
509 | if track.HitTest(EDA_RECT(start_rect, size_rect), False):
510 | rectangle[x][y] = self.REASON_TRACK
511 | except:
512 | wxPrint("exception on Processing all tracks...")
513 |
514 | if self.debug:
515 | wxPrint("\nPost tracks:")
516 | self.PrintRect(rectangle)
517 |
518 | # Same job with existing text
519 | wxPrint("Processing all existing drawings...")
520 | for draw in all_drawings:
521 | inter = float(self.clearance + self.size)
522 | bbox = draw.GetBoundingBox()
523 |
524 | start_x = int(floor(((bbox.GetPosition().x - inter) - origin.x) / l_clearance))
525 | stop_x = int(ceil(((bbox.GetPosition().x + (bbox.GetSize().x + inter)) - origin.x) / l_clearance))
526 |
527 | start_y = int(floor(((bbox.GetPosition().y - inter) - origin.y) / l_clearance))
528 | stop_y = int(ceil(((bbox.GetPosition().y + (bbox.GetSize().y + inter)) - origin.y) / l_clearance))
529 |
530 | for x in range(start_x, stop_x + 1):
531 | for y in range(start_y, stop_y + 1):
532 | rectangle[x][y] = self.REASON_DRAWING
533 |
534 | if self.debug:
535 | wxPrint("Post Drawnings:")
536 | self.PrintRect(rectangle)
537 |
538 | wxPrint("Remove vias to guarantee step size...")
539 | clear_distance = 0
540 | if self.step != 0.0:
541 | # How much "via steps" should be removed around a via (round up)
542 | clear_distance = int((self.step+l_clearance) / l_clearance)
543 |
544 | via_placed = 0
545 | for x in xrange(len(rectangle)):
546 | for y in xrange(len(rectangle[0])):
547 | if isinstance(rectangle[x][y], ViaObject):
548 | if clear_distance:
549 | self.ClearViaInStepSize(rectangle, x, y, clear_distance)
550 |
551 | via = rectangle[x][y]
552 | ran_x = 0
553 | ran_y = 0
554 |
555 | if self.random:
556 | ran_x = (random.random() * l_clearance / 2.0) - (l_clearance / 4.0)
557 | ran_y = (random.random() * l_clearance / 2.0) - (l_clearance / 4.0)
558 |
559 | self.AddVia(wxPoint(via.PosX + ran_x, via.PosY + ran_y), via.X, via.Y)
560 | via_placed += 1
561 |
562 | if self.debug:
563 | wxPrint("\nFinal result:")
564 | self.PrintRect(rectangle)
565 |
566 | self.RefillBoardAreas()
567 |
568 | if self.filename:
569 | self.pcb.Save(self.filename)
570 | msg = "{:d} vias placed\n".format(via_placed)
571 | wxPrint(msg+"Done!")
572 |
573 |
574 | if __name__ == '__main__':
575 | if len(sys.argv) < 2:
576 | print("Usage: %s " % sys.argv[0])
577 | else:
578 | import sys
579 | FillArea(sys.argv[1]).SetDebug().Run()
580 |
--------------------------------------------------------------------------------
/ViaStitching/FillAreaAction.py:
--------------------------------------------------------------------------------
1 | #
2 | # FillAreaAction.py
3 | #
4 | # Copyright 2017 JS Reynaud
5 | #
6 | # This program is free software; you can redistribute it and/or modify
7 | # it under the terms of the GNU General Public License as published by
8 | # the Free Software Foundation; either version 2 of the License, or
9 | # (at your option) any later version.
10 | #
11 | # This program is distributed in the hope that it will be useful,
12 | # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 | # GNU General Public License for more details.
15 | #
16 | # You should have received a copy of the GNU General Public License
17 | # along with this program; if not, write to the Free Software
18 | # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
19 | # MA 02110-1301, USA.
20 | from __future__ import print_function
21 | import pcbnew
22 | import wx
23 | from . import FillArea
24 | from . import FillAreaDialog
25 | import os
26 |
27 |
28 | def PopulateNets(anet, dlg):
29 | nets = pcbnew.GetBoard().GetNetsByName()
30 | for netname, net in nets.items():
31 | netname = net.GetNetname()
32 | if netname != None and netname != "":
33 | dlg.m_cbNet.Append(netname)
34 | if anet != None:
35 | index = dlg.m_cbNet.FindString(anet)
36 | dlg.m_cbNet.Select(index)
37 | #
38 |
39 |
40 | class FillAreaDialogEx(FillAreaDialog.FillAreaDialog):
41 |
42 | def onDeleteClick(self, event):
43 | return self.EndModal(wx.ID_DELETE)
44 |
45 |
46 | class FillAreaAction(pcbnew.ActionPlugin):
47 |
48 | def defaults(self):
49 | self.name = "Via Stitching Generator"
50 | self.category = "Modify PCB"
51 | self.description = "Via Stitching for PCB Zone"
52 | self.icon_file_name = os.path.join(os.path.dirname(__file__), "./stitching-vias.png")
53 | self.show_toolbar_button = True
54 |
55 | def Run(self):
56 | a = FillAreaDialogEx(None)
57 | # a.m_SizeMM.SetValue("0.8")
58 | a.m_StepMM.SetValue("2.54")
59 | # a.m_DrillMM.SetValue("0.3")
60 | # a.m_Netname.SetValue("GND")
61 | # a.m_ClearanceMM.SetValue("0.2")
62 | a.m_Star.SetValue(True)
63 | a.m_bitmapStitching.SetBitmap(wx.Bitmap(os.path.join(os.path.dirname(os.path.realpath(__file__)), "stitching-vias-help.png")))
64 | self.board = pcbnew.GetBoard()
65 | self.boardDesignSettings = self.board.GetDesignSettings()
66 | a.m_SizeMM.SetValue(str(pcbnew.ToMM(self.boardDesignSettings.GetCurrentViaSize())))
67 | a.m_DrillMM.SetValue(str(pcbnew.ToMM(self.boardDesignSettings.GetCurrentViaDrill())))
68 | a.m_ClearanceMM.SetValue(str(pcbnew.ToMM(self.boardDesignSettings.GetDefault().GetClearance())))
69 | a.SetMinSize(a.GetSize())
70 |
71 | PopulateNets("GND", a)
72 | modal_result = a.ShowModal()
73 | if modal_result == wx.ID_OK:
74 | wx.LogMessage('Via Stitching: Version 1.5')
75 | if 1: # try:
76 | fill = FillArea.FillArea()
77 | fill.SetStepMM(float(a.m_StepMM.GetValue().replace(',', '.')))
78 | fill.SetSizeMM(float(a.m_SizeMM.GetValue().replace(',', '.')))
79 | fill.SetDrillMM(float(a.m_DrillMM.GetValue().replace(',', '.')))
80 | fill.SetClearanceMM(float(a.m_ClearanceMM.GetValue().replace(',', '.')))
81 | # fill.SetNetname(a.m_Netname.GetValue())
82 | netname = a.m_cbNet.GetStringSelection()
83 | fill.SetNetname(netname)
84 | if a.m_Debug.IsChecked():
85 | fill.SetDebug()
86 | fill.SetRandom(a.m_Random.IsChecked())
87 | if a.m_Star.IsChecked():
88 | fill.SetStar()
89 | if a.m_only_selected.IsChecked():
90 | fill.OnlyOnSelectedArea()
91 | fill.Run()
92 | else: # except Exception:
93 | wx.MessageDialog(None, "Invalid parameter")
94 | elif modal_result == wx.ID_DELETE:
95 | if 1: # try:
96 | fill = FillArea.FillArea()
97 | fill.SetNetname(a.m_cbNet.GetStringSelection()) # a.m_Netname.GetValue())
98 | if a.m_Debug.IsChecked():
99 | fill.SetDebug()
100 | fill.DeleteVias()
101 | fill.Run()
102 | else: # except Exception:
103 | wx.MessageDialog(None, "Invalid parameter for delete")
104 | else:
105 | print("Cancel")
106 | a.Destroy()
107 |
108 |
109 | FillAreaAction().register()
110 |
--------------------------------------------------------------------------------
/ViaStitching/FillAreaDialog.py:
--------------------------------------------------------------------------------
1 | # -*- coding: utf-8 -*-
2 |
3 | ###########################################################################
4 | ## Python code generated with wxFormBuilder (version Oct 26 2018)
5 | ## http://www.wxformbuilder.org/
6 | ##
7 | ## PLEASE DO *NOT* EDIT THIS FILE!
8 | ###########################################################################
9 |
10 | import wx
11 | import wx.xrc
12 |
13 | ###########################################################################
14 | ## Class FillAreaDialog
15 | ###########################################################################
16 |
17 | class FillAreaDialog ( wx.Dialog ):
18 |
19 | def __init__( self, parent ):
20 | wx.Dialog.__init__ ( self, parent, id = wx.ID_ANY, title = u"Fill Area parameters", pos = wx.DefaultPosition, size = wx.Size( 402,580 ), style = wx.DEFAULT_DIALOG_STYLE|wx.RESIZE_BORDER )
21 |
22 | import sys
23 | if sys.version_info[0] == 2:
24 | self.SetSizeHintsSz( wx.DefaultSize, wx.DefaultSize )
25 | else:
26 | self.SetSizeHints( wx.DefaultSize, wx.DefaultSize )
27 |
28 | bSizer3 = wx.BoxSizer( wx.VERTICAL )
29 |
30 | fgSizer1 = wx.FlexGridSizer( 0, 2, 0, 0 )
31 | fgSizer1.SetFlexibleDirection( wx.BOTH )
32 | fgSizer1.SetNonFlexibleGrowMode( wx.FLEX_GROWMODE_SPECIFIED )
33 |
34 | self.m_staticText3 = wx.StaticText( self, wx.ID_ANY, u"Via copper size (mm)", wx.DefaultPosition, wx.DefaultSize, 0 )
35 | self.m_staticText3.Wrap( -1 )
36 |
37 | fgSizer1.Add( self.m_staticText3, 1, wx.ALL|wx.EXPAND, 5 )
38 |
39 | self.m_SizeMM = wx.TextCtrl( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
40 | self.m_SizeMM.SetMinSize( wx.Size( 1000,-1 ) )
41 |
42 | fgSizer1.Add( self.m_SizeMM, 1, wx.ALL|wx.EXPAND, 5 )
43 |
44 | self.m_staticText9 = wx.StaticText( self, wx.ID_ANY, u"Via drill size (mm)", wx.DefaultPosition, wx.DefaultSize, 0 )
45 | self.m_staticText9.Wrap( -1 )
46 |
47 | fgSizer1.Add( self.m_staticText9, 1, wx.ALL|wx.EXPAND, 5 )
48 |
49 | self.m_DrillMM = wx.TextCtrl( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
50 | fgSizer1.Add( self.m_DrillMM, 1, wx.ALL|wx.EXPAND, 5 )
51 |
52 | self.m_staticText5 = wx.StaticText( self, wx.ID_ANY, u"Via clearance (mm)", wx.DefaultPosition, wx.DefaultSize, 0 )
53 | self.m_staticText5.Wrap( -1 )
54 |
55 | fgSizer1.Add( self.m_staticText5, 1, wx.ALL|wx.EXPAND, 5 )
56 |
57 | self.m_ClearanceMM = wx.TextCtrl( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
58 | fgSizer1.Add( self.m_ClearanceMM, 1, wx.ALL|wx.EXPAND, 5 )
59 |
60 | self.m_staticText2 = wx.StaticText( self, wx.ID_ANY, u"Via grid (mm)", wx.DefaultPosition, wx.DefaultSize, 0 )
61 | self.m_staticText2.Wrap( -1 )
62 |
63 | fgSizer1.Add( self.m_staticText2, 0, wx.ALL, 5 )
64 |
65 | self.m_StepMM = wx.TextCtrl( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
66 | fgSizer1.Add( self.m_StepMM, 1, wx.ALL|wx.EXPAND, 5 )
67 |
68 |
69 | fgSizer1.Add( ( 0, 0), 1, wx.EXPAND, 5 )
70 |
71 | self.m_bitmapStitching = wx.StaticBitmap( self, wx.ID_ANY, wx.NullBitmap, wx.DefaultPosition, wx.DefaultSize, 0 )
72 | fgSizer1.Add( self.m_bitmapStitching, 0, wx.EXPAND, 5 )
73 |
74 | self.m_staticText6 = wx.StaticText( self, wx.ID_ANY, u"Net name", wx.DefaultPosition, wx.DefaultSize, 0 )
75 | self.m_staticText6.Wrap( -1 )
76 |
77 | fgSizer1.Add( self.m_staticText6, 1, wx.ALL|wx.EXPAND, 5 )
78 |
79 | m_cbNetChoices = []
80 | self.m_cbNet = wx.ComboBox( self, wx.ID_ANY, u"GND", wx.DefaultPosition, wx.DefaultSize, m_cbNetChoices, wx.CB_READONLY )
81 | fgSizer1.Add( self.m_cbNet, 1, wx.ALL|wx.EXPAND, 5 )
82 |
83 | self.m_staticText7 = wx.StaticText( self, wx.ID_ANY, u"Debug mode", wx.DefaultPosition, wx.DefaultSize, 0 )
84 | self.m_staticText7.Wrap( -1 )
85 |
86 | fgSizer1.Add( self.m_staticText7, 1, wx.ALL|wx.EXPAND, 5 )
87 |
88 | self.m_Debug = wx.CheckBox( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
89 | fgSizer1.Add( self.m_Debug, 1, wx.ALL|wx.EXPAND, 5 )
90 |
91 | self.m_staticText8 = wx.StaticText( self, wx.ID_ANY, u"Random it", wx.DefaultPosition, wx.DefaultSize, 0 )
92 | self.m_staticText8.Wrap( -1 )
93 |
94 | fgSizer1.Add( self.m_staticText8, 0, wx.ALL, 5 )
95 |
96 | self.m_Random = wx.CheckBox( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
97 | fgSizer1.Add( self.m_Random, 0, wx.ALL, 5 )
98 |
99 | self.m_staticText42 = wx.StaticText( self, wx.ID_ANY, u"Star Pattern", wx.DefaultPosition, wx.DefaultSize, 0 )
100 | self.m_staticText42.Wrap( -1 )
101 |
102 | fgSizer1.Add( self.m_staticText42, 0, wx.ALL, 5 )
103 |
104 | self.m_Star = wx.CheckBox( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
105 | fgSizer1.Add( self.m_Star, 0, wx.ALL, 5 )
106 |
107 | self.m_staticText81 = wx.StaticText( self, wx.ID_ANY, u"Only under selected Zone", wx.DefaultPosition, wx.DefaultSize, 0 )
108 | self.m_staticText81.Wrap( -1 )
109 |
110 | fgSizer1.Add( self.m_staticText81, 0, wx.ALL, 5 )
111 |
112 | self.m_only_selected = wx.CheckBox( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
113 | fgSizer1.Add( self.m_only_selected, 0, wx.ALL, 5 )
114 |
115 |
116 | bSizer3.Add( fgSizer1, 1, wx.EXPAND, 5 )
117 |
118 | bSizer1 = wx.BoxSizer( wx.HORIZONTAL )
119 |
120 | self.m_staticText101 = wx.StaticText( self, wx.ID_ANY, wx.EmptyString, wx.DefaultPosition, wx.DefaultSize, 0 )
121 | self.m_staticText101.Wrap( -1 )
122 |
123 | bSizer1.Add( self.m_staticText101, 1, wx.ALL, 5 )
124 |
125 | self.m_button1 = wx.Button( self, wx.ID_OK, u"Run", wx.DefaultPosition, wx.DefaultSize, 0 )
126 |
127 | self.m_button1.SetDefault()
128 | bSizer1.Add( self.m_button1, 0, wx.ALL|wx.ALIGN_CENTER_VERTICAL, 5 )
129 |
130 | self.m_button2 = wx.Button( self, wx.ID_CANCEL, u"Cancel", wx.DefaultPosition, wx.DefaultSize, 0 )
131 | bSizer1.Add( self.m_button2, 0, wx.ALL, 5 )
132 |
133 | self.m_button3_delete = wx.Button( self, wx.ID_DELETE, u"Delete Vias", wx.DefaultPosition, wx.DefaultSize, 0 )
134 | bSizer1.Add( self.m_button3_delete, 0, wx.ALL, 5 )
135 |
136 |
137 | bSizer3.Add( bSizer1, 0, wx.EXPAND|wx.ALIGN_RIGHT, 5 )
138 |
139 |
140 | self.SetSizer( bSizer3 )
141 | self.Layout()
142 |
143 | self.Centre( wx.BOTH )
144 |
145 | # Connect Events
146 | self.m_button3_delete.Bind( wx.EVT_BUTTON, self.onDeleteClick )
147 |
148 | def __del__( self ):
149 | pass
150 |
151 |
152 | # Virtual event handlers, overide them in your derived class
153 | def onDeleteClick( self, event ):
154 | event.Skip()
155 |
156 |
157 |
--------------------------------------------------------------------------------
/ViaStitching/__init__.py:
--------------------------------------------------------------------------------
1 | # Two way of installation of this plugin:
2 | # - Copy or link this directory to KiCad plugin directory (~/.kicad_plugin/ViaStitching/)
3 | # - Copy files to ~/.kicad_plugin except __init__.py...
4 | from __future__ import print_function
5 | import pprint
6 | import traceback
7 | import sys
8 |
9 | print("Starting plugin ViaStitching")
10 | try:
11 | from .FillAreaAction import *
12 | except Exception as e:
13 | traceback.print_exc(file=sys.stdout)
14 | pprint.pprint(e)
15 |
--------------------------------------------------------------------------------
/ViaStitching/stitching-vias-help.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/ViaStitching/stitching-vias-help.png
--------------------------------------------------------------------------------
/ViaStitching/stitching-vias-help.svg:
--------------------------------------------------------------------------------
1 |
2 |
253 |
--------------------------------------------------------------------------------
/ViaStitching/stitching-vias.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/ViaStitching/stitching-vias.png
--------------------------------------------------------------------------------
/ViaStitching/stitching-vias.svg:
--------------------------------------------------------------------------------
1 |
2 |
156 |
--------------------------------------------------------------------------------
/images/circular1.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/circular1.png
--------------------------------------------------------------------------------
/images/circular2.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/circular2.png
--------------------------------------------------------------------------------
/images/circular3.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/circular3.png
--------------------------------------------------------------------------------
/images/circular4.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/circular4.png
--------------------------------------------------------------------------------
/images/via1.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/via1.png
--------------------------------------------------------------------------------
/images/via2.png:
--------------------------------------------------------------------------------
https://raw.githubusercontent.com/easyw/kicad-action-scripts/da2a1335e2d6bc7e8560431865d2a56f9d220aae/images/via2.png
--------------------------------------------------------------------------------