├── Assembly process ├── 01.The CF-PCMCIA adapter.JPG ├── 02.The CF-PCMCIA connector.JPG ├── 03.Opening the CF-PCMCIA adapter.JPG ├── 04.The metallic clipses you need to open.JPG ├── 05.The CF-PCMCIA adapter once opened.JPG ├── 06.Desoldering the PCMCIA connector.JPG ├── 07.The PCB with SMD soldered.JPG ├── 08.The PCB with the connector.JPG ├── 09.Testing the board.JPG ├── 10.The board is detected by PrepCard.JPG ├── 11.The board is detected by SysInfo.JPG ├── 12.Measure where to cut the enclosure.JPG ├── 13.Cut 1 or 2mm after the edge of the PCB.JPG ├── 14.Measure where to cut the metallic covers.JPG ├── 15.Use old strong scissors to cut the metal sheet.JPG ├── 16.Place insulating tape just in case to prevent shorts.JPG ├── 17.Close the lid.JPG ├── 18.Seal the end with hot glue or whatever.JPG └── 19.Ready to go.JPG ├── CC-BY-NC-SA-4.0 ├── CPLD ├── PCMCIA_RAM.xsvf ├── PCMCIA_RAM_no_attribute_ROM.xsvf ├── pcmcia_sram.ucf └── pcmcia_sram.v ├── Doc └── PCMCIA_CF_Adapter.jpg ├── Kicad ├── PCMCIA_SRAM.kicad_pcb ├── PCMCIA_SRAM.kicad_pro └── PCMCIA_SRAM.kicad_sch ├── PCB ├── PCMCIA-SRAM schematic.pdf ├── PCMCIA_SRAM-B_Cu.gbl ├── PCMCIA_SRAM-B_Mask.gbs ├── PCMCIA_SRAM-B_Paste.gbp ├── PCMCIA_SRAM-B_Silkscreen.gbo ├── PCMCIA_SRAM-Edge_Cuts.gm1 ├── PCMCIA_SRAM-F_Cu.gtl ├── PCMCIA_SRAM-F_Mask.gts ├── PCMCIA_SRAM-F_Paste.gtp ├── PCMCIA_SRAM-F_Silkscreen.gto ├── PCMCIA_SRAM-NPTH-drl_map.gbr ├── PCMCIA_SRAM-NPTH.drl ├── PCMCIA_SRAM-PTH-drl_map.gbr ├── PCMCIA_SRAM-PTH.drl └── ibom.html ├── PCMCIA-SRAM.JPG └── README.md /Assembly process/01.The CF-PCMCIA adapter.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/01.The CF-PCMCIA adapter.JPG -------------------------------------------------------------------------------- /Assembly process/02.The CF-PCMCIA connector.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/02.The CF-PCMCIA connector.JPG -------------------------------------------------------------------------------- /Assembly process/03.Opening the CF-PCMCIA adapter.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/03.Opening the CF-PCMCIA adapter.JPG -------------------------------------------------------------------------------- /Assembly process/04.The metallic clipses you need to open.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/04.The metallic clipses you need to open.JPG -------------------------------------------------------------------------------- /Assembly process/05.The CF-PCMCIA adapter once opened.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/05.The CF-PCMCIA adapter once opened.JPG -------------------------------------------------------------------------------- /Assembly process/06.Desoldering the PCMCIA connector.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/06.Desoldering the PCMCIA connector.JPG -------------------------------------------------------------------------------- /Assembly process/07.The PCB with SMD soldered.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/07.The PCB with SMD soldered.JPG -------------------------------------------------------------------------------- /Assembly process/08.The PCB with the connector.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/08.The PCB with the connector.JPG -------------------------------------------------------------------------------- /Assembly process/09.Testing the board.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/09.Testing the board.JPG -------------------------------------------------------------------------------- /Assembly process/10.The board is detected by PrepCard.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/10.The board is detected by PrepCard.JPG -------------------------------------------------------------------------------- /Assembly process/11.The board is detected by SysInfo.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/11.The board is detected by SysInfo.JPG -------------------------------------------------------------------------------- /Assembly process/12.Measure where to cut the enclosure.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/12.Measure where to cut the enclosure.JPG -------------------------------------------------------------------------------- /Assembly process/13.Cut 1 or 2mm after the edge of the PCB.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/13.Cut 1 or 2mm after the edge of the PCB.JPG -------------------------------------------------------------------------------- /Assembly process/14.Measure where to cut the metallic covers.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/14.Measure where to cut the metallic covers.JPG -------------------------------------------------------------------------------- /Assembly process/15.Use old strong scissors to cut the metal sheet.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/15.Use old strong scissors to cut the metal sheet.JPG -------------------------------------------------------------------------------- /Assembly process/16.Place insulating tape just in case to prevent shorts.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/16.Place insulating tape just in case to prevent shorts.JPG -------------------------------------------------------------------------------- /Assembly process/17.Close the lid.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/17.Close the lid.JPG -------------------------------------------------------------------------------- /Assembly process/18.Seal the end with hot glue or whatever.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/18.Seal the end with hot glue or whatever.JPG -------------------------------------------------------------------------------- /Assembly process/19.Ready to go.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Assembly process/19.Ready to go.JPG -------------------------------------------------------------------------------- /CC-BY-NC-SA-4.0: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/CC-BY-NC-SA-4.0 -------------------------------------------------------------------------------- /CPLD/PCMCIA_RAM.xsvf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/CPLD/PCMCIA_RAM.xsvf -------------------------------------------------------------------------------- /CPLD/PCMCIA_RAM_no_attribute_ROM.xsvf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/CPLD/PCMCIA_RAM_no_attribute_ROM.xsvf -------------------------------------------------------------------------------- /CPLD/pcmcia_sram.ucf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/CPLD/pcmcia_sram.ucf -------------------------------------------------------------------------------- /CPLD/pcmcia_sram.v: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/CPLD/pcmcia_sram.v -------------------------------------------------------------------------------- /Doc/PCMCIA_CF_Adapter.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Doc/PCMCIA_CF_Adapter.jpg -------------------------------------------------------------------------------- /Kicad/PCMCIA_SRAM.kicad_pcb: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Kicad/PCMCIA_SRAM.kicad_pcb -------------------------------------------------------------------------------- /Kicad/PCMCIA_SRAM.kicad_pro: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Kicad/PCMCIA_SRAM.kicad_pro -------------------------------------------------------------------------------- /Kicad/PCMCIA_SRAM.kicad_sch: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/Kicad/PCMCIA_SRAM.kicad_sch -------------------------------------------------------------------------------- /PCB/PCMCIA-SRAM schematic.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA-SRAM schematic.pdf -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-B_Cu.gbl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-B_Cu.gbl -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-B_Mask.gbs: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-B_Mask.gbs -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-B_Paste.gbp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-B_Paste.gbp -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-B_Silkscreen.gbo: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-B_Silkscreen.gbo -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-Edge_Cuts.gm1: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-Edge_Cuts.gm1 -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-F_Cu.gtl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-F_Cu.gtl -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-F_Mask.gts: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-F_Mask.gts -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-F_Paste.gtp: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-F_Paste.gtp -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-F_Silkscreen.gto: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-F_Silkscreen.gto -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-NPTH-drl_map.gbr: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-NPTH-drl_map.gbr -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-NPTH.drl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-NPTH.drl -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-PTH-drl_map.gbr: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-PTH-drl_map.gbr -------------------------------------------------------------------------------- /PCB/PCMCIA_SRAM-PTH.drl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/PCMCIA_SRAM-PTH.drl -------------------------------------------------------------------------------- /PCB/ibom.html: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCB/ibom.html -------------------------------------------------------------------------------- /PCMCIA-SRAM.JPG: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/PCMCIA-SRAM.JPG -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/f1ac0/PCMCIA-SRAM/HEAD/README.md --------------------------------------------------------------------------------