├── .github └── workflows │ ├── docker-publish-apache.yml │ ├── docker-publish-crond.yml │ └── docker-publish-mariadb.yml ├── .gitignore ├── LICENSE ├── README.md ├── docker ├── apache │ ├── Dockerfile │ ├── conf.d │ │ └── glpi.conf │ ├── php.d │ │ ├── 99-apcu.ini │ │ ├── 99-glpi.ini │ │ └── 99-timezone.ini │ └── scripts │ │ ├── glpi-entrypoint.sh │ │ └── plugins.sh ├── crond │ ├── Dockerfile │ ├── backup.sh │ ├── crond-entrypoint.sh │ └── crontab ├── docker-compose-build.yml ├── docker-compose.yml └── mariadb │ ├── Dockerfile │ └── src │ └── glpi-9.5.6.sql ├── install_glpi.sh ├── kubernetes ├── glpi-configmap.yaml ├── glpi-cronjob.yaml ├── glpi-deployment.yaml ├── glpi-pv.yaml ├── glpi-secret.yaml ├── glpi-service.yaml ├── mariadb-glpi-deployment.yaml ├── mariadb-glpi-pv.yaml ├── mariadb-glpi-secret.yaml └── mariadb-glpi-service.yaml └── topologia-docker-compose-glpi.png /.github/workflows/docker-publish-apache.yml: -------------------------------------------------------------------------------- 1 | name: Docker 2 | 3 | # This workflow uses actions that are not certified by GitHub. 4 | # They are provided by a third-party and are governed by 5 | # separate terms of service, privacy policy, and support 6 | # documentation. 7 | 8 | on: 9 | push: 10 | pull_request: 11 | branches: [ master ] 12 | 13 | 14 | env: 15 | USERNAME: eduardofraga 16 | # Use docker.io for Docker Hub if empty 17 | # REGISTRY: ghcr.io 18 | REGISTRY: docker.io 19 | # github.repository as / 20 | IMAGE_NAME: ${{ github.repository }} 21 | 22 | 23 | jobs: 24 | build: 25 | runs-on: ubuntu-latest 26 | 27 | permissions: 28 | contents: read 29 | packages: write 30 | # This is used to complete the identity challenge 31 | # with sigstore/fulcio when running outside of PRs. 32 | id-token: write 33 | 34 | steps: 35 | - name: Checkout repository 36 | uses: actions/checkout@v2 37 | 38 | # Install the cosign tool except on PR 39 | # https://github.com/sigstore/cosign-installer 40 | - name: Install cosign 41 | if: github.event_name != 'pull_request' 42 | uses: sigstore/cosign-installer@1e95c1de343b5b0c23352d6417ee3e48d5bcd422 43 | with: 44 | cosign-release: 'v1.4.0' 45 | 46 | 47 | # Workaround: https://github.com/docker/build-push-action/issues/461 48 | - name: Setup Docker buildx 49 | uses: docker/setup-buildx-action@79abd3f86f79a9d68a23c75a09a9a85889262adf 50 | 51 | # Login against a Docker registry except on PR 52 | # https://github.com/docker/login-action 53 | - name: Log into registry ${{ env.REGISTRY }} 54 | if: github.event_name != 'pull_request' 55 | uses: docker/login-action@28218f9b04b4f3f62068d7b6ce6ca5b26e35336c 56 | with: 57 | registry: ${{ env.REGISTRY }} 58 | username: ${{ env.USERNAME }} 59 | # username: ${{ github.actor }} 60 | password: ${{ secrets.DOCKER_HUB_TOKEN }} 61 | # password: ${{ secrets.GITHUB_TOKEN }} 62 | 63 | # Extract metadata (tags, labels) for Docker 64 | # https://github.com/docker/metadata-action 65 | - name: Extract Docker metadata 66 | id: meta 67 | uses: docker/metadata-action@98669ae865ea3cffbcbaa878cf57c20bbf1c6c38 68 | with: 69 | images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ env.GITHUB_HEAD_REF }} 70 | 71 | # Build and push Docker image with Buildx (don't push on PR) 72 | # https://github.com/docker/build-push-action 73 | - name: Build and push Docker image apache 74 | id: build-and-push-apache 75 | uses: docker/build-push-action@ad44023a93711e3deb337508980b4b5e9bcdc5dc 76 | with: 77 | context: docker/apache/ 78 | push: ${{ github.event_name != 'pull_request' }} 79 | tags: ${{ steps.meta.outputs.tags }} 80 | labels: ${{ steps.meta.outputs.labels }} 81 | 82 | # Sign the resulting Docker image digest except on PRs. 83 | # This will only write to the public Rekor transparency log when the Docker 84 | # repository is public to avoid leaking data. If you would like to publish 85 | # transparency data even for private images, pass --force to cosign below. 86 | # https://github.com/sigstore/cosign 87 | - name: Sign the published Docker image 88 | if: ${{ github.event_name != 'pull_request' }} 89 | env: 90 | COSIGN_EXPERIMENTAL: "true" 91 | # This step uses the identity token to provision an ephemeral certificate 92 | # against the sigstore community Fulcio instance. 93 | run: cosign sign ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}@${{ steps.build-and-push.outputs.digest }} 94 | -------------------------------------------------------------------------------- /.github/workflows/docker-publish-crond.yml: -------------------------------------------------------------------------------- 1 | name: Docker 2 | 3 | # This workflow uses actions that are not certified by GitHub. 4 | # They are provided by a third-party and are governed by 5 | # separate terms of service, privacy policy, and support 6 | # documentation. 7 | 8 | on: 9 | push: 10 | pull_request: 11 | branches: [ master ] 12 | 13 | 14 | env: 15 | USERNAME: eduardofraga 16 | # Use docker.io for Docker Hub if empty 17 | # REGISTRY: ghcr.io 18 | REGISTRY: docker.io 19 | # github.repository as / 20 | IMAGE_NAME: ${{ github.repository }} 21 | 22 | 23 | jobs: 24 | build: 25 | runs-on: ubuntu-latest 26 | 27 | permissions: 28 | contents: read 29 | packages: write 30 | # This is used to complete the identity challenge 31 | # with sigstore/fulcio when running outside of PRs. 32 | id-token: write 33 | 34 | steps: 35 | - name: Checkout repository 36 | uses: actions/checkout@v2 37 | 38 | # Install the cosign tool except on PR 39 | # https://github.com/sigstore/cosign-installer 40 | - name: Install cosign 41 | if: github.event_name != 'pull_request' 42 | uses: sigstore/cosign-installer@1e95c1de343b5b0c23352d6417ee3e48d5bcd422 43 | with: 44 | cosign-release: 'v1.4.0' 45 | 46 | 47 | # Workaround: https://github.com/docker/build-push-action/issues/461 48 | - name: Setup Docker buildx 49 | uses: docker/setup-buildx-action@79abd3f86f79a9d68a23c75a09a9a85889262adf 50 | 51 | # Login against a Docker registry except on PR 52 | # https://github.com/docker/login-action 53 | - name: Log into registry ${{ env.REGISTRY }} 54 | if: github.event_name != 'pull_request' 55 | uses: docker/login-action@28218f9b04b4f3f62068d7b6ce6ca5b26e35336c 56 | with: 57 | registry: ${{ env.REGISTRY }} 58 | username: ${{ env.USERNAME }} 59 | # username: ${{ github.actor }} 60 | password: ${{ secrets.DOCKER_HUB_TOKEN }} 61 | # password: ${{ secrets.GITHUB_TOKEN }} 62 | 63 | # Extract metadata (tags, labels) for Docker 64 | # https://github.com/docker/metadata-action 65 | - name: Extract Docker metadata 66 | id: meta 67 | uses: docker/metadata-action@98669ae865ea3cffbcbaa878cf57c20bbf1c6c38 68 | with: 69 | images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ env.GITHUB_HEAD_REF }}-crond 70 | 71 | 72 | # Build and push Docker image with Buildx (don't push on PR) 73 | # https://github.com/docker/build-push-action 74 | - name: Build and push Docker image crond 75 | id: build-and-push-crond 76 | uses: docker/build-push-action@ad44023a93711e3deb337508980b4b5e9bcdc5dc 77 | with: 78 | context: docker/crond/ 79 | push: ${{ github.event_name != 'pull_request' }} 80 | tags: ${{ steps.meta.outputs.tags }} 81 | # tags: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ env.GITHUB_HEAD_REF }}-crond, ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}:crond 82 | labels: ${{ steps.meta.outputs.labels }} 83 | 84 | # Sign the resulting Docker image digest except on PRs. 85 | # This will only write to the public Rekor transparency log when the Docker 86 | # repository is public to avoid leaking data. If you would like to publish 87 | # transparency data even for private images, pass --force to cosign below. 88 | # https://github.com/sigstore/cosign 89 | - name: Sign the published Docker image 90 | if: ${{ github.event_name != 'pull_request' }} 91 | env: 92 | COSIGN_EXPERIMENTAL: "true" 93 | # This step uses the identity token to provision an ephemeral certificate 94 | # against the sigstore community Fulcio instance. 95 | run: cosign sign ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}@${{ steps.build-and-push.outputs.digest }} 96 | -------------------------------------------------------------------------------- /.github/workflows/docker-publish-mariadb.yml: -------------------------------------------------------------------------------- 1 | name: Docker 2 | 3 | # This workflow uses actions that are not certified by GitHub. 4 | # They are provided by a third-party and are governed by 5 | # separate terms of service, privacy policy, and support 6 | # documentation. 7 | 8 | on: 9 | push: 10 | pull_request: 11 | branches: [ master ] 12 | 13 | 14 | env: 15 | USERNAME: eduardofraga 16 | # Use docker.io for Docker Hub if empty 17 | # REGISTRY: ghcr.io 18 | REGISTRY: docker.io 19 | # github.repository as / 20 | IMAGE_NAME: ${{ github.repository }} 21 | 22 | 23 | jobs: 24 | build: 25 | runs-on: ubuntu-latest 26 | 27 | permissions: 28 | contents: read 29 | packages: write 30 | # This is used to complete the identity challenge 31 | # with sigstore/fulcio when running outside of PRs. 32 | id-token: write 33 | 34 | steps: 35 | - name: Checkout repository 36 | uses: actions/checkout@v2 37 | 38 | # Install the cosign tool except on PR 39 | # https://github.com/sigstore/cosign-installer 40 | - name: Install cosign 41 | if: github.event_name != 'pull_request' 42 | uses: sigstore/cosign-installer@1e95c1de343b5b0c23352d6417ee3e48d5bcd422 43 | with: 44 | cosign-release: 'v1.4.0' 45 | 46 | 47 | # Workaround: https://github.com/docker/build-push-action/issues/461 48 | - name: Setup Docker buildx 49 | uses: docker/setup-buildx-action@79abd3f86f79a9d68a23c75a09a9a85889262adf 50 | 51 | # Login against a Docker registry except on PR 52 | # https://github.com/docker/login-action 53 | - name: Log into registry ${{ env.REGISTRY }} 54 | if: github.event_name != 'pull_request' 55 | uses: docker/login-action@28218f9b04b4f3f62068d7b6ce6ca5b26e35336c 56 | with: 57 | registry: ${{ env.REGISTRY }} 58 | username: ${{ env.USERNAME }} 59 | # username: ${{ github.actor }} 60 | password: ${{ secrets.DOCKER_HUB_TOKEN }} 61 | # password: ${{ secrets.GITHUB_TOKEN }} 62 | 63 | # Extract metadata (tags, labels) for Docker 64 | # https://github.com/docker/metadata-action 65 | - name: Extract Docker metadata 66 | id: meta 67 | uses: docker/metadata-action@98669ae865ea3cffbcbaa878cf57c20bbf1c6c38 68 | with: 69 | images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ env.GITHUB_HEAD_REF }}-mariadb 70 | 71 | # Build and push Docker image with Buildx (don't push on PR) 72 | # https://github.com/docker/build-push-action 73 | - name: Build and push Docker image mariadb 74 | id: build-and-push-mariadb 75 | uses: docker/build-push-action@ad44023a93711e3deb337508980b4b5e9bcdc5dc 76 | with: 77 | context: docker/mariadb/ 78 | push: ${{ github.event_name != 'pull_request' }} 79 | tags: ${{ steps.meta.outputs.tags }} 80 | labels: ${{ steps.meta.outputs.labels }} 81 | 82 | # Sign the resulting Docker image digest except on PRs. 83 | # This will only write to the public Rekor transparency log when the Docker 84 | # repository is public to avoid leaking data. If you would like to publish 85 | # transparency data even for private images, pass --force to cosign below. 86 | # https://github.com/sigstore/cosign 87 | - name: Sign the published Docker image 88 | if: ${{ github.event_name != 'pull_request' }} 89 | env: 90 | COSIGN_EXPERIMENTAL: "true" 91 | # This step uses the identity token to provision an ephemeral certificate 92 | # against the sigstore community Fulcio instance. 93 | run: cosign sign ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}@${{ steps.build-and-push.outputs.digest }} 94 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | 2 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | GNU GENERAL PUBLIC LICENSE 2 | Version 3, 29 June 2007 3 | 4 | Copyright (C) 2007 Free Software Foundation, Inc. 5 | Everyone is permitted to copy and distribute verbatim copies 6 | of this license document, but changing it is not allowed. 7 | 8 | Preamble 9 | 10 | The GNU General Public License is a free, copyleft license for 11 | software and other kinds of works. 12 | 13 | The licenses for most software and other practical works are designed 14 | to take away your freedom to share and change the works. By contrast, 15 | the GNU General Public License is intended to guarantee your freedom to 16 | share and change all versions of a program--to make sure it remains free 17 | software for all its users. We, the Free Software Foundation, use the 18 | GNU General Public License for most of our software; it applies also to 19 | any other work released this way by its authors. You can apply it to 20 | your programs, too. 21 | 22 | When we speak of free software, we are referring to freedom, not 23 | price. Our General Public Licenses are designed to make sure that you 24 | have the freedom to distribute copies of free software (and charge for 25 | them if you wish), that you receive source code or can get it if you 26 | want it, that you can change the software or use pieces of it in new 27 | free programs, and that you know you can do these things. 28 | 29 | To protect your rights, we need to prevent others from denying you 30 | these rights or asking you to surrender the rights. Therefore, you have 31 | certain responsibilities if you distribute copies of the software, or if 32 | you modify it: responsibilities to respect the freedom of others. 33 | 34 | For example, if you distribute copies of such a program, whether 35 | gratis or for a fee, you must pass on to the recipients the same 36 | freedoms that you received. You must make sure that they, too, receive 37 | or can get the source code. And you must show them these terms so they 38 | know their rights. 39 | 40 | Developers that use the GNU GPL protect your rights with two steps: 41 | (1) assert copyright on the software, and (2) offer you this License 42 | giving you legal permission to copy, distribute and/or modify it. 43 | 44 | For the developers' and authors' protection, the GPL clearly explains 45 | that there is no warranty for this free software. For both users' and 46 | authors' sake, the GPL requires that modified versions be marked as 47 | changed, so that their problems will not be attributed erroneously to 48 | authors of previous versions. 49 | 50 | Some devices are designed to deny users access to install or run 51 | modified versions of the software inside them, although the manufacturer 52 | can do so. This is fundamentally incompatible with the aim of 53 | protecting users' freedom to change the software. The systematic 54 | pattern of such abuse occurs in the area of products for individuals to 55 | use, which is precisely where it is most unacceptable. Therefore, we 56 | have designed this version of the GPL to prohibit the practice for those 57 | products. If such problems arise substantially in other domains, we 58 | stand ready to extend this provision to those domains in future versions 59 | of the GPL, as needed to protect the freedom of users. 60 | 61 | Finally, every program is threatened constantly by software patents. 62 | States should not allow patents to restrict development and use of 63 | software on general-purpose computers, but in those that do, we wish to 64 | avoid the special danger that patents applied to a free program could 65 | make it effectively proprietary. To prevent this, the GPL assures that 66 | patents cannot be used to render the program non-free. 67 | 68 | The precise terms and conditions for copying, distribution and 69 | modification follow. 70 | 71 | TERMS AND CONDITIONS 72 | 73 | 0. Definitions. 74 | 75 | "This License" refers to version 3 of the GNU General Public License. 76 | 77 | "Copyright" also means copyright-like laws that apply to other kinds of 78 | works, such as semiconductor masks. 79 | 80 | "The Program" refers to any copyrightable work licensed under this 81 | License. Each licensee is addressed as "you". "Licensees" and 82 | "recipients" may be individuals or organizations. 83 | 84 | To "modify" a work means to copy from or adapt all or part of the work 85 | in a fashion requiring copyright permission, other than the making of an 86 | exact copy. The resulting work is called a "modified version" of the 87 | earlier work or a work "based on" the earlier work. 88 | 89 | A "covered work" means either the unmodified Program or a work based 90 | on the Program. 91 | 92 | To "propagate" a work means to do anything with it that, without 93 | permission, would make you directly or secondarily liable for 94 | infringement under applicable copyright law, except executing it on a 95 | computer or modifying a private copy. Propagation includes copying, 96 | distribution (with or without modification), making available to the 97 | public, and in some countries other activities as well. 98 | 99 | To "convey" a work means any kind of propagation that enables other 100 | parties to make or receive copies. Mere interaction with a user through 101 | a computer network, with no transfer of a copy, is not conveying. 102 | 103 | An interactive user interface displays "Appropriate Legal Notices" 104 | to the extent that it includes a convenient and prominently visible 105 | feature that (1) displays an appropriate copyright notice, and (2) 106 | tells the user that there is no warranty for the work (except to the 107 | extent that warranties are provided), that licensees may convey the 108 | work under this License, and how to view a copy of this License. If 109 | the interface presents a list of user commands or options, such as a 110 | menu, a prominent item in the list meets this criterion. 111 | 112 | 1. Source Code. 113 | 114 | The "source code" for a work means the preferred form of the work 115 | for making modifications to it. "Object code" means any non-source 116 | form of a work. 117 | 118 | A "Standard Interface" means an interface that either is an official 119 | standard defined by a recognized standards body, or, in the case of 120 | interfaces specified for a particular programming language, one that 121 | is widely used among developers working in that language. 122 | 123 | The "System Libraries" of an executable work include anything, other 124 | than the work as a whole, that (a) is included in the normal form of 125 | packaging a Major Component, but which is not part of that Major 126 | Component, and (b) serves only to enable use of the work with that 127 | Major Component, or to implement a Standard Interface for which an 128 | implementation is available to the public in source code form. A 129 | "Major Component", in this context, means a major essential component 130 | (kernel, window system, and so on) of the specific operating system 131 | (if any) on which the executable work runs, or a compiler used to 132 | produce the work, or an object code interpreter used to run it. 133 | 134 | The "Corresponding Source" for a work in object code form means all 135 | the source code needed to generate, install, and (for an executable 136 | work) run the object code and to modify the work, including scripts to 137 | control those activities. However, it does not include the work's 138 | System Libraries, or general-purpose tools or generally available free 139 | programs which are used unmodified in performing those activities but 140 | which are not part of the work. For example, Corresponding Source 141 | includes interface definition files associated with source files for 142 | the work, and the source code for shared libraries and dynamically 143 | linked subprograms that the work is specifically designed to require, 144 | such as by intimate data communication or control flow between those 145 | subprograms and other parts of the work. 146 | 147 | The Corresponding Source need not include anything that users 148 | can regenerate automatically from other parts of the Corresponding 149 | Source. 150 | 151 | The Corresponding Source for a work in source code form is that 152 | same work. 153 | 154 | 2. Basic Permissions. 155 | 156 | All rights granted under this License are granted for the term of 157 | copyright on the Program, and are irrevocable provided the stated 158 | conditions are met. This License explicitly affirms your unlimited 159 | permission to run the unmodified Program. The output from running a 160 | covered work is covered by this License only if the output, given its 161 | content, constitutes a covered work. This License acknowledges your 162 | rights of fair use or other equivalent, as provided by copyright law. 163 | 164 | You may make, run and propagate covered works that you do not 165 | convey, without conditions so long as your license otherwise remains 166 | in force. You may convey covered works to others for the sole purpose 167 | of having them make modifications exclusively for you, or provide you 168 | with facilities for running those works, provided that you comply with 169 | the terms of this License in conveying all material for which you do 170 | not control copyright. Those thus making or running the covered works 171 | for you must do so exclusively on your behalf, under your direction 172 | and control, on terms that prohibit them from making any copies of 173 | your copyrighted material outside their relationship with you. 174 | 175 | Conveying under any other circumstances is permitted solely under 176 | the conditions stated below. Sublicensing is not allowed; section 10 177 | makes it unnecessary. 178 | 179 | 3. Protecting Users' Legal Rights From Anti-Circumvention Law. 180 | 181 | No covered work shall be deemed part of an effective technological 182 | measure under any applicable law fulfilling obligations under article 183 | 11 of the WIPO copyright treaty adopted on 20 December 1996, or 184 | similar laws prohibiting or restricting circumvention of such 185 | measures. 186 | 187 | When you convey a covered work, you waive any legal power to forbid 188 | circumvention of technological measures to the extent such circumvention 189 | is effected by exercising rights under this License with respect to 190 | the covered work, and you disclaim any intention to limit operation or 191 | modification of the work as a means of enforcing, against the work's 192 | users, your or third parties' legal rights to forbid circumvention of 193 | technological measures. 194 | 195 | 4. Conveying Verbatim Copies. 196 | 197 | You may convey verbatim copies of the Program's source code as you 198 | receive it, in any medium, provided that you conspicuously and 199 | appropriately publish on each copy an appropriate copyright notice; 200 | keep intact all notices stating that this License and any 201 | non-permissive terms added in accord with section 7 apply to the code; 202 | keep intact all notices of the absence of any warranty; and give all 203 | recipients a copy of this License along with the Program. 204 | 205 | You may charge any price or no price for each copy that you convey, 206 | and you may offer support or warranty protection for a fee. 207 | 208 | 5. Conveying Modified Source Versions. 209 | 210 | You may convey a work based on the Program, or the modifications to 211 | produce it from the Program, in the form of source code under the 212 | terms of section 4, provided that you also meet all of these conditions: 213 | 214 | a) The work must carry prominent notices stating that you modified 215 | it, and giving a relevant date. 216 | 217 | b) The work must carry prominent notices stating that it is 218 | released under this License and any conditions added under section 219 | 7. This requirement modifies the requirement in section 4 to 220 | "keep intact all notices". 221 | 222 | c) You must license the entire work, as a whole, under this 223 | License to anyone who comes into possession of a copy. This 224 | License will therefore apply, along with any applicable section 7 225 | additional terms, to the whole of the work, and all its parts, 226 | regardless of how they are packaged. This License gives no 227 | permission to license the work in any other way, but it does not 228 | invalidate such permission if you have separately received it. 229 | 230 | d) If the work has interactive user interfaces, each must display 231 | Appropriate Legal Notices; however, if the Program has interactive 232 | interfaces that do not display Appropriate Legal Notices, your 233 | work need not make them do so. 234 | 235 | A compilation of a covered work with other separate and independent 236 | works, which are not by their nature extensions of the covered work, 237 | and which are not combined with it such as to form a larger program, 238 | in or on a volume of a storage or distribution medium, is called an 239 | "aggregate" if the compilation and its resulting copyright are not 240 | used to limit the access or legal rights of the compilation's users 241 | beyond what the individual works permit. Inclusion of a covered work 242 | in an aggregate does not cause this License to apply to the other 243 | parts of the aggregate. 244 | 245 | 6. Conveying Non-Source Forms. 246 | 247 | You may convey a covered work in object code form under the terms 248 | of sections 4 and 5, provided that you also convey the 249 | machine-readable Corresponding Source under the terms of this License, 250 | in one of these ways: 251 | 252 | a) Convey the object code in, or embodied in, a physical product 253 | (including a physical distribution medium), accompanied by the 254 | Corresponding Source fixed on a durable physical medium 255 | customarily used for software interchange. 256 | 257 | b) Convey the object code in, or embodied in, a physical product 258 | (including a physical distribution medium), accompanied by a 259 | written offer, valid for at least three years and valid for as 260 | long as you offer spare parts or customer support for that product 261 | model, to give anyone who possesses the object code either (1) a 262 | copy of the Corresponding Source for all the software in the 263 | product that is covered by this License, on a durable physical 264 | medium customarily used for software interchange, for a price no 265 | more than your reasonable cost of physically performing this 266 | conveying of source, or (2) access to copy the 267 | Corresponding Source from a network server at no charge. 268 | 269 | c) Convey individual copies of the object code with a copy of the 270 | written offer to provide the Corresponding Source. This 271 | alternative is allowed only occasionally and noncommercially, and 272 | only if you received the object code with such an offer, in accord 273 | with subsection 6b. 274 | 275 | d) Convey the object code by offering access from a designated 276 | place (gratis or for a charge), and offer equivalent access to the 277 | Corresponding Source in the same way through the same place at no 278 | further charge. You need not require recipients to copy the 279 | Corresponding Source along with the object code. If the place to 280 | copy the object code is a network server, the Corresponding Source 281 | may be on a different server (operated by you or a third party) 282 | that supports equivalent copying facilities, provided you maintain 283 | clear directions next to the object code saying where to find the 284 | Corresponding Source. Regardless of what server hosts the 285 | Corresponding Source, you remain obligated to ensure that it is 286 | available for as long as needed to satisfy these requirements. 287 | 288 | e) Convey the object code using peer-to-peer transmission, provided 289 | you inform other peers where the object code and Corresponding 290 | Source of the work are being offered to the general public at no 291 | charge under subsection 6d. 292 | 293 | A separable portion of the object code, whose source code is excluded 294 | from the Corresponding Source as a System Library, need not be 295 | included in conveying the object code work. 296 | 297 | A "User Product" is either (1) a "consumer product", which means any 298 | tangible personal property which is normally used for personal, family, 299 | or household purposes, or (2) anything designed or sold for incorporation 300 | into a dwelling. In determining whether a product is a consumer product, 301 | doubtful cases shall be resolved in favor of coverage. For a particular 302 | product received by a particular user, "normally used" refers to a 303 | typical or common use of that class of product, regardless of the status 304 | of the particular user or of the way in which the particular user 305 | actually uses, or expects or is expected to use, the product. A product 306 | is a consumer product regardless of whether the product has substantial 307 | commercial, industrial or non-consumer uses, unless such uses represent 308 | the only significant mode of use of the product. 309 | 310 | "Installation Information" for a User Product means any methods, 311 | procedures, authorization keys, or other information required to install 312 | and execute modified versions of a covered work in that User Product from 313 | a modified version of its Corresponding Source. The information must 314 | suffice to ensure that the continued functioning of the modified object 315 | code is in no case prevented or interfered with solely because 316 | modification has been made. 317 | 318 | If you convey an object code work under this section in, or with, or 319 | specifically for use in, a User Product, and the conveying occurs as 320 | part of a transaction in which the right of possession and use of the 321 | User Product is transferred to the recipient in perpetuity or for a 322 | fixed term (regardless of how the transaction is characterized), the 323 | Corresponding Source conveyed under this section must be accompanied 324 | by the Installation Information. But this requirement does not apply 325 | if neither you nor any third party retains the ability to install 326 | modified object code on the User Product (for example, the work has 327 | been installed in ROM). 328 | 329 | The requirement to provide Installation Information does not include a 330 | requirement to continue to provide support service, warranty, or updates 331 | for a work that has been modified or installed by the recipient, or for 332 | the User Product in which it has been modified or installed. Access to a 333 | network may be denied when the modification itself materially and 334 | adversely affects the operation of the network or violates the rules and 335 | protocols for communication across the network. 336 | 337 | Corresponding Source conveyed, and Installation Information provided, 338 | in accord with this section must be in a format that is publicly 339 | documented (and with an implementation available to the public in 340 | source code form), and must require no special password or key for 341 | unpacking, reading or copying. 342 | 343 | 7. Additional Terms. 344 | 345 | "Additional permissions" are terms that supplement the terms of this 346 | License by making exceptions from one or more of its conditions. 347 | Additional permissions that are applicable to the entire Program shall 348 | be treated as though they were included in this License, to the extent 349 | that they are valid under applicable law. If additional permissions 350 | apply only to part of the Program, that part may be used separately 351 | under those permissions, but the entire Program remains governed by 352 | this License without regard to the additional permissions. 353 | 354 | When you convey a copy of a covered work, you may at your option 355 | remove any additional permissions from that copy, or from any part of 356 | it. (Additional permissions may be written to require their own 357 | removal in certain cases when you modify the work.) You may place 358 | additional permissions on material, added by you to a covered work, 359 | for which you have or can give appropriate copyright permission. 360 | 361 | Notwithstanding any other provision of this License, for material you 362 | add to a covered work, you may (if authorized by the copyright holders of 363 | that material) supplement the terms of this License with terms: 364 | 365 | a) Disclaiming warranty or limiting liability differently from the 366 | terms of sections 15 and 16 of this License; or 367 | 368 | b) Requiring preservation of specified reasonable legal notices or 369 | author attributions in that material or in the Appropriate Legal 370 | Notices displayed by works containing it; or 371 | 372 | c) Prohibiting misrepresentation of the origin of that material, or 373 | requiring that modified versions of such material be marked in 374 | reasonable ways as different from the original version; or 375 | 376 | d) Limiting the use for publicity purposes of names of licensors or 377 | authors of the material; or 378 | 379 | e) Declining to grant rights under trademark law for use of some 380 | trade names, trademarks, or service marks; or 381 | 382 | f) Requiring indemnification of licensors and authors of that 383 | material by anyone who conveys the material (or modified versions of 384 | it) with contractual assumptions of liability to the recipient, for 385 | any liability that these contractual assumptions directly impose on 386 | those licensors and authors. 387 | 388 | All other non-permissive additional terms are considered "further 389 | restrictions" within the meaning of section 10. If the Program as you 390 | received it, or any part of it, contains a notice stating that it is 391 | governed by this License along with a term that is a further 392 | restriction, you may remove that term. If a license document contains 393 | a further restriction but permits relicensing or conveying under this 394 | License, you may add to a covered work material governed by the terms 395 | of that license document, provided that the further restriction does 396 | not survive such relicensing or conveying. 397 | 398 | If you add terms to a covered work in accord with this section, you 399 | must place, in the relevant source files, a statement of the 400 | additional terms that apply to those files, or a notice indicating 401 | where to find the applicable terms. 402 | 403 | Additional terms, permissive or non-permissive, may be stated in the 404 | form of a separately written license, or stated as exceptions; 405 | the above requirements apply either way. 406 | 407 | 8. Termination. 408 | 409 | You may not propagate or modify a covered work except as expressly 410 | provided under this License. Any attempt otherwise to propagate or 411 | modify it is void, and will automatically terminate your rights under 412 | this License (including any patent licenses granted under the third 413 | paragraph of section 11). 414 | 415 | However, if you cease all violation of this License, then your 416 | license from a particular copyright holder is reinstated (a) 417 | provisionally, unless and until the copyright holder explicitly and 418 | finally terminates your license, and (b) permanently, if the copyright 419 | holder fails to notify you of the violation by some reasonable means 420 | prior to 60 days after the cessation. 421 | 422 | Moreover, your license from a particular copyright holder is 423 | reinstated permanently if the copyright holder notifies you of the 424 | violation by some reasonable means, this is the first time you have 425 | received notice of violation of this License (for any work) from that 426 | copyright holder, and you cure the violation prior to 30 days after 427 | your receipt of the notice. 428 | 429 | Termination of your rights under this section does not terminate the 430 | licenses of parties who have received copies or rights from you under 431 | this License. If your rights have been terminated and not permanently 432 | reinstated, you do not qualify to receive new licenses for the same 433 | material under section 10. 434 | 435 | 9. Acceptance Not Required for Having Copies. 436 | 437 | You are not required to accept this License in order to receive or 438 | run a copy of the Program. Ancillary propagation of a covered work 439 | occurring solely as a consequence of using peer-to-peer transmission 440 | to receive a copy likewise does not require acceptance. However, 441 | nothing other than this License grants you permission to propagate or 442 | modify any covered work. These actions infringe copyright if you do 443 | not accept this License. Therefore, by modifying or propagating a 444 | covered work, you indicate your acceptance of this License to do so. 445 | 446 | 10. Automatic Licensing of Downstream Recipients. 447 | 448 | Each time you convey a covered work, the recipient automatically 449 | receives a license from the original licensors, to run, modify and 450 | propagate that work, subject to this License. You are not responsible 451 | for enforcing compliance by third parties with this License. 452 | 453 | An "entity transaction" is a transaction transferring control of an 454 | organization, or substantially all assets of one, or subdividing an 455 | organization, or merging organizations. If propagation of a covered 456 | work results from an entity transaction, each party to that 457 | transaction who receives a copy of the work also receives whatever 458 | licenses to the work the party's predecessor in interest had or could 459 | give under the previous paragraph, plus a right to possession of the 460 | Corresponding Source of the work from the predecessor in interest, if 461 | the predecessor has it or can get it with reasonable efforts. 462 | 463 | You may not impose any further restrictions on the exercise of the 464 | rights granted or affirmed under this License. For example, you may 465 | not impose a license fee, royalty, or other charge for exercise of 466 | rights granted under this License, and you may not initiate litigation 467 | (including a cross-claim or counterclaim in a lawsuit) alleging that 468 | any patent claim is infringed by making, using, selling, offering for 469 | sale, or importing the Program or any portion of it. 470 | 471 | 11. Patents. 472 | 473 | A "contributor" is a copyright holder who authorizes use under this 474 | License of the Program or a work on which the Program is based. The 475 | work thus licensed is called the contributor's "contributor version". 476 | 477 | A contributor's "essential patent claims" are all patent claims 478 | owned or controlled by the contributor, whether already acquired or 479 | hereafter acquired, that would be infringed by some manner, permitted 480 | by this License, of making, using, or selling its contributor version, 481 | but do not include claims that would be infringed only as a 482 | consequence of further modification of the contributor version. For 483 | purposes of this definition, "control" includes the right to grant 484 | patent sublicenses in a manner consistent with the requirements of 485 | this License. 486 | 487 | Each contributor grants you a non-exclusive, worldwide, royalty-free 488 | patent license under the contributor's essential patent claims, to 489 | make, use, sell, offer for sale, import and otherwise run, modify and 490 | propagate the contents of its contributor version. 491 | 492 | In the following three paragraphs, a "patent license" is any express 493 | agreement or commitment, however denominated, not to enforce a patent 494 | (such as an express permission to practice a patent or covenant not to 495 | sue for patent infringement). To "grant" such a patent license to a 496 | party means to make such an agreement or commitment not to enforce a 497 | patent against the party. 498 | 499 | If you convey a covered work, knowingly relying on a patent license, 500 | and the Corresponding Source of the work is not available for anyone 501 | to copy, free of charge and under the terms of this License, through a 502 | publicly available network server or other readily accessible means, 503 | then you must either (1) cause the Corresponding Source to be so 504 | available, or (2) arrange to deprive yourself of the benefit of the 505 | patent license for this particular work, or (3) arrange, in a manner 506 | consistent with the requirements of this License, to extend the patent 507 | license to downstream recipients. "Knowingly relying" means you have 508 | actual knowledge that, but for the patent license, your conveying the 509 | covered work in a country, or your recipient's use of the covered work 510 | in a country, would infringe one or more identifiable patents in that 511 | country that you have reason to believe are valid. 512 | 513 | If, pursuant to or in connection with a single transaction or 514 | arrangement, you convey, or propagate by procuring conveyance of, a 515 | covered work, and grant a patent license to some of the parties 516 | receiving the covered work authorizing them to use, propagate, modify 517 | or convey a specific copy of the covered work, then the patent license 518 | you grant is automatically extended to all recipients of the covered 519 | work and works based on it. 520 | 521 | A patent license is "discriminatory" if it does not include within 522 | the scope of its coverage, prohibits the exercise of, or is 523 | conditioned on the non-exercise of one or more of the rights that are 524 | specifically granted under this License. You may not convey a covered 525 | work if you are a party to an arrangement with a third party that is 526 | in the business of distributing software, under which you make payment 527 | to the third party based on the extent of your activity of conveying 528 | the work, and under which the third party grants, to any of the 529 | parties who would receive the covered work from you, a discriminatory 530 | patent license (a) in connection with copies of the covered work 531 | conveyed by you (or copies made from those copies), or (b) primarily 532 | for and in connection with specific products or compilations that 533 | contain the covered work, unless you entered into that arrangement, 534 | or that patent license was granted, prior to 28 March 2007. 535 | 536 | Nothing in this License shall be construed as excluding or limiting 537 | any implied license or other defenses to infringement that may 538 | otherwise be available to you under applicable patent law. 539 | 540 | 12. No Surrender of Others' Freedom. 541 | 542 | If conditions are imposed on you (whether by court order, agreement or 543 | otherwise) that contradict the conditions of this License, they do not 544 | excuse you from the conditions of this License. If you cannot convey a 545 | covered work so as to satisfy simultaneously your obligations under this 546 | License and any other pertinent obligations, then as a consequence you may 547 | not convey it at all. For example, if you agree to terms that obligate you 548 | to collect a royalty for further conveying from those to whom you convey 549 | the Program, the only way you could satisfy both those terms and this 550 | License would be to refrain entirely from conveying the Program. 551 | 552 | 13. Use with the GNU Affero General Public License. 553 | 554 | Notwithstanding any other provision of this License, you have 555 | permission to link or combine any covered work with a work licensed 556 | under version 3 of the GNU Affero General Public License into a single 557 | combined work, and to convey the resulting work. The terms of this 558 | License will continue to apply to the part which is the covered work, 559 | but the special requirements of the GNU Affero General Public License, 560 | section 13, concerning interaction through a network will apply to the 561 | combination as such. 562 | 563 | 14. Revised Versions of this License. 564 | 565 | The Free Software Foundation may publish revised and/or new versions of 566 | the GNU General Public License from time to time. Such new versions will 567 | be similar in spirit to the present version, but may differ in detail to 568 | address new problems or concerns. 569 | 570 | Each version is given a distinguishing version number. If the 571 | Program specifies that a certain numbered version of the GNU General 572 | Public License "or any later version" applies to it, you have the 573 | option of following the terms and conditions either of that numbered 574 | version or of any later version published by the Free Software 575 | Foundation. If the Program does not specify a version number of the 576 | GNU General Public License, you may choose any version ever published 577 | by the Free Software Foundation. 578 | 579 | If the Program specifies that a proxy can decide which future 580 | versions of the GNU General Public License can be used, that proxy's 581 | public statement of acceptance of a version permanently authorizes you 582 | to choose that version for the Program. 583 | 584 | Later license versions may give you additional or different 585 | permissions. However, no additional obligations are imposed on any 586 | author or copyright holder as a result of your choosing to follow a 587 | later version. 588 | 589 | 15. Disclaimer of Warranty. 590 | 591 | THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY 592 | APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT 593 | HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY 594 | OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 595 | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 596 | PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM 597 | IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF 598 | ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 599 | 600 | 16. Limitation of Liability. 601 | 602 | IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING 603 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS 604 | THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY 605 | GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 606 | USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 607 | DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD 608 | PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 609 | EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 610 | SUCH DAMAGES. 611 | 612 | 17. Interpretation of Sections 15 and 16. 613 | 614 | If the disclaimer of warranty and limitation of liability provided 615 | above cannot be given local legal effect according to their terms, 616 | reviewing courts shall apply local law that most closely approximates 617 | an absolute waiver of all civil liability in connection with the 618 | Program, unless a warranty or assumption of liability accompanies a 619 | copy of the Program in return for a fee. 620 | 621 | END OF TERMS AND CONDITIONS 622 | 623 | How to Apply These Terms to Your New Programs 624 | 625 | If you develop a new program, and you want it to be of the greatest 626 | possible use to the public, the best way to achieve this is to make it 627 | free software which everyone can redistribute and change under these terms. 628 | 629 | To do so, attach the following notices to the program. It is safest 630 | to attach them to the start of each source file to most effectively 631 | state the exclusion of warranty; and each file should have at least 632 | the "copyright" line and a pointer to where the full notice is found. 633 | 634 | 635 | Copyright (C) 636 | 637 | This program is free software: you can redistribute it and/or modify 638 | it under the terms of the GNU General Public License as published by 639 | the Free Software Foundation, either version 3 of the License, or 640 | (at your option) any later version. 641 | 642 | This program is distributed in the hope that it will be useful, 643 | but WITHOUT ANY WARRANTY; without even the implied warranty of 644 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 645 | GNU General Public License for more details. 646 | 647 | You should have received a copy of the GNU General Public License 648 | along with this program. If not, see . 649 | 650 | Also add information on how to contact you by electronic and paper mail. 651 | 652 | If the program does terminal interaction, make it output a short 653 | notice like this when it starts in an interactive mode: 654 | 655 | Copyright (C) 656 | This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 657 | This is free software, and you are welcome to redistribute it 658 | under certain conditions; type `show c' for details. 659 | 660 | The hypothetical commands `show w' and `show c' should show the appropriate 661 | parts of the General Public License. Of course, your program's commands 662 | might be different; for a GUI interface, you would use an "about box". 663 | 664 | You should also get your employer (if you work as a programmer) or school, 665 | if any, to sign a "copyright disclaimer" for the program, if necessary. 666 | For more information on this, and how to apply and follow the GNU GPL, see 667 | . 668 | 669 | The GNU General Public License does not permit incorporating your program 670 | into proprietary programs. If your program is a subroutine library, you 671 | may consider it more useful to permit linking proprietary applications with 672 | the library. If this is what you want to do, use the GNU Lesser General 673 | Public License instead of this License. But first, please read 674 | . 675 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | ![GLPI Logo](https://raw.githubusercontent.com/glpi-project/glpi/master/pics/logos/logo-GLPI-250-black.png) 2 | 3 | # GLPI Docker Container 4 | 5 | ## Demo 6 | 7 | https://www.katacoda.com/eduardofraga/scenarios/glpi-playground 8 | 9 | 10 | ## About GLPI 11 | 12 | GLPI stands for **Gestionnaire Libre de Parc Informatique** is a Free Asset and IT Management Software package, that provides ITIL Service Desk features, licenses tracking and software auditing. 13 | 14 | https://github.com/glpi-project/glpi 15 | 16 | 17 | ## For Courses e-Learning 18 | 19 | https://www.fametreinamentos.com.br 20 | 21 | 22 | ## For Support 23 | 24 | https://www.fametec.com.br 25 | 26 | contato@fametec.com.br 27 | 28 | 29 | ## License 30 | 31 | ![license](https://img.shields.io/github/license/glpi-project/glpi.svg) 32 | 33 | 34 | ## Topology 35 | 36 | 37 | ![Topology](https://raw.githubusercontent.com/fametec/glpi/master/topologia-docker-compose-glpi.png) 38 | 39 | 40 | ## Install on docker container 41 | 42 | ### Play 43 | 44 | [![asciicast](https://asciinema.org/a/GUsmlWWh2rKKwV1pqNw3j5ica.svg)](https://asciinema.org/a/GUsmlWWh2rKKwV1pqNw3j5ica) 45 | 46 | 47 | ### Deploy MariaDB 48 | 49 | 50 | docker run -d --name mariadb-glpi \ 51 | -e MYSQL_DATABASE=glpi \ 52 | -e MYSQL_USER=glpi \ 53 | -e MYSQL_PASSWORD=glpi \ 54 | -e MYSQL_RANDOM_ROOT_PASSWORD=1 \ 55 | -p 3306:3306 \ 56 | fametec/glpi:mariadb 57 | 58 | 59 | ### Deploy GLPI 60 | 61 | 62 | docker run -d --name glpi \ 63 | --link mariadb-glpi:mariadb-glpi \ 64 | -e GLPI_LANG=pt_BR \ 65 | -e MARIADB_HOST=mariadb-glpi \ 66 | -e MARIADB_PORT=3306 \ 67 | -e MARIADB_DATABASE=glpi \ 68 | -e MARIADB_USER=glpi \ 69 | -e MARIADB_PASSWORD=glpi \ 70 | -e VERSION="9.5.6" \ 71 | -e PLUGINS="all" \ 72 | -p 80:80 \ 73 | -p 443:443 \ 74 | fametec/glpi:latest 75 | 76 | 77 | ### Deploy Cron to Schedule jobs 78 | 79 | 80 | docker run -d --name crond-glpi --link mariadb-glpi:mariadb --volume glpi:/var/www/html/glpi fametec/glpi:crond 81 | 82 | 83 | # Docker Compose 84 | 85 | ### docker-compose.yaml 86 | 87 | 88 | 89 | version: "3.5" 90 | services: 91 | mariadb-glpi: 92 | image: fametec/glpi:mariadb 93 | restart: unless-stopped 94 | volumes: 95 | - mariadb-glpi-volume:/var/lib/mysql:rw 96 | environment: 97 | MYSQL_DATABASE: glpi 98 | MYSQL_USER: glpi-user 99 | MYSQL_PASSWORD: glpi-pass 100 | MYSQL_RANDOM_ROOT_PASSWORD: 1 101 | ports: 102 | - 3306:3306 103 | networks: 104 | - glpi-backend 105 | glpi: 106 | image: fametec/glpi:latest 107 | restart: unless-stopped 108 | volumes: 109 | - glpi-volume-files:/var/www/html/files:rw 110 | - glpi-volume-plugins:/var/www/html/plugins:rw 111 | environment: 112 | GLPI_LANG: pt_BR 113 | MARIADB_HOST: mariadb-glpi 114 | MARIADB_PORT: 3306 115 | MARIADB_DATABASE: glpi 116 | MARIADB_USER: glpi-user 117 | MARIADB_PASSWORD: glpi-pass 118 | VERSION: "9.5.6" 119 | PLUGINS: "all" 120 | depends_on: 121 | - mariadb-glpi 122 | - php-fpm 123 | ports: 124 | - 30080:80 125 | networks: 126 | - glpi-frontend 127 | - glpi-backend 128 | # 129 | # CRON 130 | # 131 | crond: 132 | image: fametec/glpi:crond 133 | restart: unless-stopped 134 | volumes: 135 | - glpi-volume:/usr/share/nginx/html/glpi:rw 136 | depends_on: 137 | - mariadb-glpi 138 | environment: 139 | MARIADB_HOST: mariadb-glpi 140 | MARIADB_PORT: 3306 141 | MARIADB_DATABASE: glpi 142 | MARIADB_USER: glpi-user 143 | MARIADB_PASSWORD: glpi-pass 144 | volumes: 145 | - glpi-volume-files:/var/www/html/files:rw 146 | - glpi-volume-plugins:/var/www/html/plugins:rw 147 | networks: 148 | - glpi-backend 149 | # 150 | # VOLUMES 151 | # 152 | volumes: 153 | glpi-volume-files: 154 | glpi-volume-plugins: 155 | mariadb-glpi-volume: 156 | # 157 | # NETWORKS 158 | # 159 | networks: 160 | glpi-frontend: 161 | glpi-backend: 162 | 163 | 164 | 165 | # Manual install 166 | 167 | This script will install the GLPI on Linux Server CentOS 7.6 Minimal. 168 | 169 | ## Play 170 | 171 | [![asciicast](https://asciinema.org/a/Rb61UJXZh7mbMQuIoVoiURKQg.svg)](https://asciinema.org/a/Rb61UJXZh7mbMQuIoVoiURKQg) 172 | 173 | 174 | ## Silent 175 | 176 | ```curl -sSL 'https://raw.githubusercontent.com/fametec/glpi/master/install_glpi.sh' | bash``` 177 | 178 | 179 | ## Download 180 | 181 | 182 | ```curl -sSL 'https://raw.githubusercontent.com/fametec/glpi/master/install_glpi.sh' -o install_glpi.sh ``` 183 | 184 | 185 | ## Configuration 186 | 187 | Edit the script 188 | 189 | 190 | VERSION="9.5.7" # GLPI Version to install 191 | TIMEZONE=America/Fortaleza # Timezone default=Etc/UTC 192 | FQDN="glpi.fametec.com.br" # Virtualhost default=glpi.fametec.com.br 193 | ADMINEMAIL="suporte@fametec.com.br" # Admin e-mail 194 | ORGANIZATION="FAMETec" # Organization name 195 | MYSQL_ROOT_PASSWORD='' # MariaDB root password, default=empty 196 | DBUSER="glpi" # Database username, default=glpi 197 | DBHOST="localhost" # Database Host/IP, default=localhost 198 | DBNAME="glpi" # Database name, default=glpi 199 | DBPASS="E`< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-32};echo;`" # 200 | MYSQL_NEW_ROOT_PASSWORD="C`< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-32};echo;`" 201 | 202 | 203 | 204 | 205 | 206 | After instalation the script save the credentials and variables in ''install_glpi.log'' for future maintenance. 207 | 208 | 209 | ==================================================== 210 | ## VARIAVEIS 211 | 212 | VERSION=9.5.7 213 | TIMEZONE=America/Fortaleza 214 | FQDN=glpi.fametec.com.br 215 | ADMINEMAIL=suporte@fametec.com.br 216 | ORGANIZATION=FAMETec 217 | MYSQL_ROOT_PASSWORD= 218 | DBUSER=glpi 219 | DBHOST=localhost 220 | DBNAME=glpi 221 | DBPASS=EmpNHclqyx8x_ufp6fl0GHDyVD-qSwA-i 222 | MYSQL_NEW_ROOT_PASSWORD=CHhXZvrX0EGDhtp08IRYuC1qswi-g2kW4 223 | 224 | 225 | MYSQL=mysql -u root -pCHhXZvrX0EGDhtp08IRYuC1qswi-g2kW4 226 | CURL=/usr/bin/curl 227 | 228 | ==================================================== 229 | 230 | 231 | 232 | -------------------------------------------------------------------------------- /docker/apache/Dockerfile: -------------------------------------------------------------------------------- 1 | FROM centos:7 2 | 3 | MAINTAINER eduardo@fametec.com.br 4 | 5 | ENV VERSION 9.5.6 6 | 7 | ENV GLPI_LANG pt_BR 8 | 9 | ENV MARIADB_HOST mariadb-glpi 10 | 11 | ENV MARIADB_PORT 3306 12 | 13 | ENV MARIADB_DATABASE glpi 14 | 15 | ENV MARIADB_USER glpi 16 | 17 | ENV MARIADB_PASSWORD glpi 18 | 19 | WORKDIR /var/www/html 20 | 21 | RUN yum -y install epel-release yum-utils 22 | 23 | RUN yum -y install http://rpms.remirepo.net/enterprise/remi-release-7.rpm 24 | 25 | RUN yum-config-manager --enable remi-php73 26 | 27 | RUN yum -y install \ 28 | bzip2 \ 29 | httpd \ 30 | php \ 31 | php-common \ 32 | php-mcrypt \ 33 | php-cli \ 34 | php-gd \ 35 | php-mysqlnd \ 36 | php-json \ 37 | php-mbstring \ 38 | php-mysqli \ 39 | php-session \ 40 | php-gd \ 41 | php-curl \ 42 | php-domxml \ 43 | php-imap \ 44 | php-ldap \ 45 | php-openssl \ 46 | php-opcache \ 47 | php-apcu \ 48 | php-xmlrpc \ 49 | php-intl \ 50 | php-zip \ 51 | php-pear-CAS \ 52 | php-ZendFramework-Cache-Backend-Apc \ 53 | php-sodium \ 54 | php-pecl-zip \ 55 | && yum -y clean all 56 | 57 | ADD php.d /etc/php.d 58 | 59 | ADD conf.d /etc/httpd/conf.d 60 | 61 | # COPY --chown=apache:apache src/glpi /var/www/html 62 | 63 | ADD https://github.com/glpi-project/glpi/releases/download/9.5.6/glpi-9.5.6.tgz /tmp/ 64 | # 65 | RUN tar -zxf /tmp/glpi-9.5.6.tgz -C /tmp/ \ 66 | && mv /tmp/glpi/* /var/www/html/ \ 67 | && chown -R apache:apache /var/www/html \ 68 | && rm -rf /tmp/glpi-9.5.6.tgz 69 | 70 | VOLUME [ "/var/www/html/files", "/var/www/html/plugins" ] 71 | 72 | ADD scripts/glpi-entrypoint.sh scripts/plugins.sh / 73 | 74 | RUN chmod 755 /glpi-entrypoint.sh /plugins.sh \ 75 | && rm -rf /var/www/html/install/install.php 76 | 77 | EXPOSE 80/tcp 78 | 79 | CMD ["/glpi-entrypoint.sh"] 80 | -------------------------------------------------------------------------------- /docker/apache/conf.d/glpi.conf: -------------------------------------------------------------------------------- 1 | 2 | Options Indexes FollowSymLinks 3 | AllowOverride All 4 | Require all granted 5 | 6 | ErrorLog /dev/stderr 7 | TransferLog /dev/stdout 8 | 9 | -------------------------------------------------------------------------------- /docker/apache/php.d/99-apcu.ini: -------------------------------------------------------------------------------- 1 | apc.enable_cli = 1 ; -------------------------------------------------------------------------------- /docker/apache/php.d/99-glpi.ini: -------------------------------------------------------------------------------- 1 | memory_limit = 96M; 2 | file_uploads = on ; 3 | max_execution_time = 600 ; 4 | register_globals = off ; 5 | magic_quotes_sybase = off ; 6 | session.auto_start = off ; 7 | session.use_trans_sid = 0 ; 8 | 9 | -------------------------------------------------------------------------------- /docker/apache/php.d/99-timezone.ini: -------------------------------------------------------------------------------- 1 | [Date] 2 | date.timezone = Etc/UTC ; 3 | 4 | -------------------------------------------------------------------------------- /docker/apache/scripts/glpi-entrypoint.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | ConfigDataBase () { 4 | 5 | { 6 | echo " /var/www/html/config/config_db.php 16 | 17 | } 18 | 19 | 20 | VerifyDir () { 21 | 22 | DIR="/var/www/html/files/_cron 23 | /var/www/html/files/_dumps 24 | /var/www/html/files/_graphs 25 | /var/www/html/files/_log 26 | /var/www/html/files/_lock 27 | /var/www/html/files/_pictures 28 | /var/www/html/files/_plugins 29 | /var/www/html/files/_rss 30 | /var/www/html/files/_tmp 31 | /var/www/html/files/_uploads 32 | /var/www/html/files/_cache 33 | /var/www/html/files/_sessions 34 | /var/www/html/files/_locales" 35 | 36 | for i in $DIR 37 | do 38 | if [ ! -d $i ] 39 | then 40 | echo -n "Creating $i dir... " 41 | mkdir -p $i 42 | echo "done" 43 | fi 44 | done 45 | } 46 | 47 | VerifyKey () { 48 | 49 | if [ ! -e /var/www/html/config/glpicrypt.key ] 50 | then 51 | php -c /etc/php.ini bin/console glpi:security:change_key --no-interaction 52 | fi 53 | 54 | } 55 | 56 | SetPermissions () { 57 | echo -n "Setting chown in files and plugins... " 58 | chown -R apache:apache /var/www/html/files 59 | chown -R apache:apache /var/www/html/plugins 60 | echo "done" 61 | 62 | } 63 | 64 | ConfigDataBase 65 | 66 | VerifyDir 67 | 68 | VerifyKey 69 | 70 | SetPermissions 71 | 72 | httpd -D FOREGROUND 73 | -------------------------------------------------------------------------------- /docker/apache/scripts/plugins.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | # 3 | set -x 4 | # 5 | 6 | SetPermission () { 7 | 8 | chown -Rf apache:apache /var/www/html/plugins 9 | 10 | } 11 | 12 | RemoveOldPlugin() { 13 | 14 | if [ -z $1 ] 15 | then 16 | return "Use: $0 directory" 17 | fi 18 | 19 | if [ ! -d /var/www/html/plugins/$1 ] 20 | then 21 | 22 | echo "Directory not found." 23 | 24 | else 25 | 26 | rm -rf /var/www/html/plugins/$1 27 | 28 | fi 29 | 30 | } 31 | 32 | PluginModifications() { 33 | 34 | RemoveOldPlugin Mod 35 | 36 | curl --progress-bar -L "https://github.com/stdonato/glpi-modifications/archive/2.0.2.tar.gz" | tar -zxf - -C /var/www/html/plugins/ 37 | 38 | mv /var/www/html/plugins/glpi-modifications-2.0.2 /var/www/html/plugins/Mod 39 | 40 | } 41 | 42 | 43 | 44 | 45 | PluginTelegramBot() { 46 | 47 | RemoveOldPlugin telegrambot 48 | 49 | curl --progress-bar -L "https://github.com/pluginsGLPI/telegrambot/releases/download/2.0.0/glpi-telegrambot-2.0.0.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 50 | 51 | } 52 | 53 | PluginPDF() { 54 | 55 | RemoveOldPlugin pdf 56 | 57 | curl --progress-bar -L "https://forge.glpi-project.org/attachments/download/2335/glpi-pdf-2.0.0.tar.gz" | tar -zxf - -C /var/www/html/plugins/ 58 | 59 | } 60 | 61 | 62 | PluginOCS() { 63 | 64 | RemoveOldPlugin ocsinventoryng 65 | 66 | curl --progress-bar -L "https://github.com/pluginsGLPI/ocsinventoryng/releases/download/1.7.3/glpi-ocsinventoryng-1.7.3.tar.gz" | tar -zxf - -C /var/www/html/plugins/ 67 | 68 | } 69 | 70 | PluginFusion() { 71 | 72 | RemoveOldPlugin fusioninventory 73 | 74 | curl --progress-bar -L "https://github.com/fusioninventory/fusioninventory-for-glpi/releases/download/glpi9.5%2B3.0/fusioninventory-9.5+3.0.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 75 | 76 | } 77 | 78 | 79 | PluginDataInjection() { 80 | 81 | RemoveOldPlugin datainjection 82 | 83 | curl --progress-bar -L "https://github.com/pluginsGLPI/datainjection/releases/download/2.9.0/glpi-datainjection-2.9.0.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 84 | 85 | } 86 | 87 | PluginFields() { 88 | 89 | RemoveOldPlugin fields 90 | 91 | curl --progress-bar -L "https://github.com/pluginsGLPI/fields/releases/download/1.12.4/glpi-fields-1.12.4.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 92 | 93 | } 94 | 95 | 96 | PluginTasklists() { 97 | 98 | RemoveOldPlugin tasklists 99 | 100 | curl --progress-bar -L "https://github.com/InfotelGLPI/tasklists/releases/download/1.6.2/glpi-tasklists-1.6.2.tar.gz" | tar -zxf - -C /var/www/html/plugins/ 101 | 102 | } 103 | 104 | 105 | PluginFormCreator() { 106 | 107 | RemoveOldPlugin formcreator 108 | 109 | curl --progress-bar -L "https://github.com/pluginsGLPI/formcreator/releases/download/v2.11.2/glpi-formcreator-2.11.2.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 110 | 111 | } 112 | 113 | 114 | PluginBehaviors() { 115 | 116 | RemoveOldPlugin behaviors 117 | 118 | curl --progress-bar -L "https://forge.glpi-project.org/attachments/download/2333/glpi-behaviors-2.4.2.tar.gz" | tar -zxf - -C /var/www/html/plugins/ 119 | 120 | } 121 | 122 | PluginCosts() { 123 | 124 | RemoveOldPlugin costs 125 | 126 | curl --progress-bar -L "https://github.com/ticgal/costs/releases/download/1.3.0/glpi-costs-1.3.0.tar.tgz" | tar -zxf - -C /var/www/html/plugins/ 127 | 128 | } 129 | 130 | 131 | PluginTag() { 132 | 133 | RemoveOldPlugin tag 134 | 135 | curl --progress-bar -L "https://github.com/pluginsGLPI/tag/releases/download/2.8.1/glpi-tag-2.8.1.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 136 | 137 | } 138 | 139 | PluginGenericObject() { 140 | 141 | RemoveOldPlugin genericobject 142 | 143 | curl --progress-bar -L "https://github.com/pluginsGLPI/genericobject/releases/download/2.10.1/glpi-genericobject-2.10.1.tar.bz2" | tar -jxf - -C /var/www/html/plugins/ 144 | 145 | } 146 | 147 | 148 | InstallPlugins() { 149 | 150 | if [ ! -z $PLUGINS ] 151 | then 152 | 153 | LIST=$(echo $PLUGINS | sed "s/,/ /g") 154 | 155 | for i in $LIST 156 | do 157 | 158 | case $i in 159 | 160 | glpi-modifications) 161 | 162 | PluginModifications 163 | 164 | ;; 165 | 166 | glpi-telegrambot) 167 | 168 | PluginTelelgramBot 169 | 170 | ;; 171 | 172 | glpi-pdf) 173 | 174 | PluginPDF 175 | 176 | ;; 177 | 178 | glpi-ocsinventoryng) 179 | 180 | PluginOCS 181 | 182 | ;; 183 | 184 | glpi-fusioninventory) 185 | 186 | PluginFusion 187 | 188 | ;; 189 | 190 | glpi-datainjection) 191 | 192 | PluginDataInjection 193 | 194 | ;; 195 | 196 | glpi-fields) 197 | 198 | PluginFields 199 | 200 | ;; 201 | 202 | glpi-tasklists) 203 | 204 | PluginTasklists 205 | 206 | ;; 207 | 208 | glpi-formcreator) 209 | 210 | PluginFormCreator 211 | 212 | ;; 213 | 214 | glpi-costs) 215 | 216 | PluginCosts 217 | 218 | ;; 219 | 220 | glpi-tag) 221 | 222 | PluginTag 223 | 224 | ;; 225 | 226 | glpi-genericobject) 227 | 228 | PluginGenericObject 229 | 230 | ;; 231 | 232 | all) 233 | # PluginModifications 234 | PluginTelegramBot 235 | PluginPDF 236 | PluginOCS 237 | PluginDataInjection 238 | PluginFields 239 | PluginTasklists 240 | PluginFormCreator 241 | PluginCosts 242 | PluginTag 243 | PluginGenericObject 244 | PluginFusion 245 | 246 | ;; 247 | 248 | *) 249 | 250 | echo "Use: $0 " 251 | echo "Available: " 252 | echo " all (all plugins above)" 253 | echo " glpi-modifications" 254 | echo " glpi-telegrambot" 255 | echo " glpi-pdf" 256 | echo " glpi-ocsinventoryng" 257 | echo " glpi-datainjection" 258 | echo " glpi-fields" 259 | echo " glpi-tasklists" 260 | echo " glpi-formcreator" 261 | echo " glpi-costs" 262 | echo " glpi-tags" 263 | echo " glpi-genericobject" 264 | echo " glpi-fusioninventory" 265 | 266 | ;; 267 | 268 | esac 269 | 270 | done 271 | 272 | fi 273 | 274 | } 275 | 276 | # 277 | # 278 | InstallPlugins 279 | # 280 | # 281 | SetPermission 282 | # 283 | # -------------------------------------------------------------------------------- /docker/crond/Dockerfile: -------------------------------------------------------------------------------- 1 | FROM fametec/glpi:9.5.6 2 | 3 | RUN yum -y install cronie mariadb 4 | 5 | ADD crontab /etc/crontab 6 | 7 | ADD crond-entrypoint.sh backup.sh / 8 | 9 | RUN chmod 0644 /etc/crontab && chmod 755 /crond-entrypoint.sh /backup.sh 10 | 11 | CMD [ "/crond-entrypoint.sh" ] 12 | -------------------------------------------------------------------------------- /docker/crond/backup.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | #Debug 4 | # set -xv 5 | #MARIADB_DATABASE="glpi" 6 | #MARIADB_HOST="mariadb-glpi" 7 | #MARIADB_PASSWORD="glpi" 8 | #MARIADB_PORT="3306" 9 | #MARIADB_USER="glpi" 10 | 11 | NOW=`date +%Y-%m-%d-%H-%M` 12 | 13 | if [ -z $MARIADB_DATABASE ]; then 14 | MARIADB_DATABASE="glpi" 15 | fi 16 | 17 | if [ -z $MARIADB_HOST ]; then 18 | MARIADB_HOST="mariadb-glpi" 19 | fi 20 | 21 | if [ -z $MARIADB_PASSWORD ]; then 22 | MARIADB_PASSWORD="glpi" 23 | fi 24 | 25 | if [ -z $MARIADB_PORT ]; then 26 | MARIADB_PORT="3306" 27 | fi 28 | 29 | if [ -z $MARIADB_USER ]; then 30 | MARIADB_USER="glpi" 31 | fi 32 | 33 | /bin/mysqldump -h $MARIADB_HOST -P $MARIADB_PORT -u $MARIADB_USER -p$MARIADB_PASSWORD --single-transaction --databases $MARIADB_DATABASE | /usr/bin/gzip > /var/www/html/files/_dumps/glpi-backup-${NOW}.sql.gz 34 | 35 | if [ $? -eq 0 ]; then 36 | 37 | chown -R apache:apache /var/www/html/files/_dumps/glpi-backup-${NOW}.sql.gz 38 | 39 | ls -lh /var/www/html/files/_dumps/glpi-backup-${NOW}.sql.gz 40 | 41 | fi 42 | 43 | /bin/find /var/www/html/files/_dumps/ -mtime +30 -delete 44 | 45 | -------------------------------------------------------------------------------- /docker/crond/crond-entrypoint.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | ConfigDataBase () { 4 | 5 | { 6 | echo " /var/www/html/config/config_db.php 16 | 17 | } 18 | 19 | 20 | ConfigDataBase 21 | 22 | crond -s -x bit -n /etc/crontab 23 | -------------------------------------------------------------------------------- /docker/crond/crontab: -------------------------------------------------------------------------------- 1 | 2 | */2 * * * * root /usr/bin/php -c /etc/php.ini /var/www/html/front/cron.php 3 | */5 * * * * root /usr/bin/php -c /etc/php.ini /var/www/html/front/cron.php --forcequeudnotification 4 | */5 * * * * root /usr/bin/php -c /etc/php.ini /var/www/html/front/cron.php --forcemailgate 5 | 6 | 0 1 * * * root /backup.sh 7 | -------------------------------------------------------------------------------- /docker/docker-compose-build.yml: -------------------------------------------------------------------------------- 1 | version: "3.5" 2 | services: 3 | # 4 | # MARIADB 5 | # 6 | mariadb-glpi: 7 | build: mariadb/ 8 | image: fametec/glpi:9.5.6-mariadb 9 | restart: unless-stopped 10 | # volumes: 11 | # - mariadb-glpi-volume:/var/lib/mysql:rw 12 | environment: 13 | MYSQL_DATABASE: glpi 14 | MYSQL_USER: glpi-user 15 | MYSQL_PASSWORD: glpi-pass 16 | MYSQL_RANDOM_ROOT_PASSWORD: 1 17 | ports: 18 | - 3306:3306 19 | networks: 20 | - glpi-backend 21 | # 22 | # GLPI 23 | # 24 | glpi: 25 | build: apache/ 26 | image: fametec/glpi:9.5.6 27 | restart: unless-stopped 28 | # volumes: 29 | # - glpi-volume-files:/var/www/html/files:rw 30 | # - glpi-volume-plugins:/var/www/html/plugins:rw 31 | # - glpi-volume-config:/var/www/html/config:rw 32 | environment: 33 | GLPI_LANG: pt_BR 34 | MARIADB_HOST: mariadb-glpi 35 | MARIADB_PORT: 3306 36 | MARIADB_DATABASE: glpi 37 | MARIADB_USER: glpi-user 38 | MARIADB_PASSWORD: glpi-pass 39 | VERSION: "9.5.6" 40 | PLUGINS: "all" 41 | depends_on: 42 | - mariadb-glpi 43 | ports: 44 | - "80:80" 45 | networks: 46 | - glpi-frontend 47 | - glpi-backend 48 | # 49 | # CRON 50 | # 51 | cronjob: 52 | build: crond/ 53 | image: fametec/glpi:9.5.6-crond 54 | restart: unless-stopped 55 | depends_on: 56 | - glpi 57 | - mariadb-glpi 58 | environment: 59 | MARIADB_HOST: mariadb-glpi 60 | MARIADB_PORT: 3306 61 | MARIADB_DATABASE: glpi 62 | MARIADB_USER: glpi-user 63 | MARIADB_PASSWORD: glpi-pass 64 | # volumes: 65 | # - glpi-volume-files:/var/www/html/files:rw 66 | # - glpi-volume-plugins:/var/www/html/plugins:rw 67 | # - glpi-volume-config:/var/www/html/config:rw 68 | networks: 69 | - glpi-backend 70 | # 71 | # VOLUMES 72 | # 73 | # volumes: 74 | # glpi-volume-files: 75 | # glpi-volume-plugins: 76 | # glpi-volume-config: 77 | # mariadb-glpi-volume: 78 | # 79 | # NETWORKS 80 | # 81 | networks: 82 | glpi-frontend: 83 | glpi-backend: 84 | -------------------------------------------------------------------------------- /docker/docker-compose.yml: -------------------------------------------------------------------------------- 1 | version: "3.3" 2 | services: 3 | mariadb-glpi: 4 | image: fametec/glpi:9.5.6-mariadb 5 | restart: unless-stopped 6 | volumes: 7 | - mariadb-glpi-volume:/var/lib/mysql:rw 8 | environment: 9 | MYSQL_DATABASE: glpi 10 | MYSQL_USER: glpi-user 11 | MYSQL_PASSWORD: glpi-pass 12 | MYSQL_RANDOM_ROOT_PASSWORD: 1 13 | ports: 14 | - 3306:3306 15 | networks: 16 | - glpi-backend 17 | # 18 | # 19 | glpi: 20 | image: fametec/glpi:9.5.6 21 | restart: unless-stopped 22 | volumes: 23 | - glpi-volume-files:/var/www/html/files:rw 24 | - glpi-volume-plugins:/var/www/html/plugins:rw 25 | - glpi-volume-config:/var/www/html/config:rw 26 | environment: 27 | GLPI_LANG: pt_BR 28 | MARIADB_HOST: mariadb-glpi 29 | MARIADB_PORT: 3306 30 | MARIADB_DATABASE: glpi 31 | MARIADB_USER: glpi-user 32 | MARIADB_PASSWORD: glpi-pass 33 | VERSION: "9.5.6" 34 | PLUGINS: "all" 35 | depends_on: 36 | - mariadb-glpi 37 | ports: 38 | - 80:80 39 | networks: 40 | - glpi-frontend 41 | - glpi-backend 42 | # 43 | # CRON 44 | # 45 | crond: 46 | image: fametec/glpi:9.5.6-crond 47 | restart: unless-stopped 48 | depends_on: 49 | - mariadb-glpi 50 | environment: 51 | MARIADB_HOST: mariadb-glpi 52 | MARIADB_PORT: 3306 53 | MARIADB_DATABASE: glpi 54 | MARIADB_USER: glpi-user 55 | MARIADB_PASSWORD: glpi-pass 56 | volumes: 57 | - glpi-volume-files:/var/www/html/files:rw 58 | - glpi-volume-plugins:/var/www/html/plugins:rw 59 | - glpi-volume-config:/var/www/html/config:rw 60 | networks: 61 | - glpi-backend 62 | # 63 | # VOLUMES 64 | # 65 | volumes: 66 | glpi-volume-files: 67 | glpi-volume-plugins: 68 | glpi-volume-config: 69 | mariadb-glpi-volume: 70 | # 71 | # NETWORKS 72 | # 73 | networks: 74 | glpi-frontend: 75 | glpi-backend: 76 | -------------------------------------------------------------------------------- /docker/mariadb/Dockerfile: -------------------------------------------------------------------------------- 1 | FROM docker.io/mariadb:10.4 2 | # 3 | ENV MYSQL_RANDOM_ROOT_PASSWORD yes 4 | ENV MYSQL_DATABASE glpi 5 | ENV MYSQL_USER glpi 6 | ENV MYSQL_PASSWORD glpi 7 | # 8 | VOLUME /var/lib/mysql 9 | # 10 | EXPOSE 3306 11 | # 12 | COPY src/*.sql /docker-entrypoint-initdb.d/ 13 | 14 | -------------------------------------------------------------------------------- /install_glpi.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | ############################################################################### 4 | 5 | # Debug 6 | 7 | # set -xv 8 | 9 | ## VARIABLES 10 | 11 | LOGS="install_glpi.log" 12 | GLPI_LANG="en_US" 13 | # GLPI_LANG="pt_BR" 14 | VERSION="9.5.6" 15 | TIMEZONE=Etc/UTC 16 | # TIMEZONE=America/Fortaleza 17 | FQDN="glpi.fametec.com.br" 18 | ADMINEMAIL="suporte@fametec.com.br" 19 | ORGANIZATION="FAMETec" 20 | MYSQL_ROOT_PASSWORD='' 21 | DBUSER="glpi" 22 | DBHOST="localhost" 23 | DBPORT=3306 24 | DBNAME="glpi" 25 | DBPASS="E`< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-32};echo;`" 26 | MYSQL_NEW_ROOT_PASSWORD="C`< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c${1:-32};echo;`" 27 | # DBPASS="qaz123" 28 | # MYSQL_NEW_ROOT_PASSWORD="qaz123" 29 | 30 | 31 | MYSQL="mysql -u root -p${MYSQL_NEW_ROOT_PASSWORD}" 32 | CURL=`which curl` 33 | 34 | 35 | Log () { 36 | 37 | cat < $LOGS 38 | 39 | ==================================================== 40 | ## VARIAVEIS 41 | 42 | VERSION=$VERSION 43 | TIMEZONE=$TIMEZONE 44 | FQDN=$FQDN 45 | ADMINEMAIL=$ADMINEMAIL 46 | ORGANIZATION=$ORGANIZATION 47 | MYSQL_ROOT_PASSWORD=$MYSQL_ROOT_PASSWORD 48 | DBUSER=$DBUSER 49 | DBHOST=$DBHOST 50 | DBPORT=$DBPORT 51 | DBNAME=$DBNAME 52 | DBPASS=$DBPASS 53 | MYSQL_NEW_ROOT_PASSWORD=$MYSQL_NEW_ROOT_PASSWORD 54 | 55 | 56 | MYSQL=$MYSQL 57 | CURL=$CURL 58 | 59 | ==================================================== 60 | 61 | 62 | 63 | EOF 64 | 65 | 66 | } 67 | 68 | 69 | EnableFirewall() { 70 | 71 | echo "Setting firewall rules..." 72 | 73 | systemctl enable --now firewalld 74 | 75 | firewall-cmd --zone=public --add-service=http --permanent 76 | 77 | firewall-cmd --zone=public --add-service=https --permanent 78 | 79 | } 80 | 81 | 82 | DisableFirewall () { 83 | 84 | systemctl disable --now firewalld 85 | 86 | } 87 | 88 | InstallRepo () { 89 | 90 | echo "Installing Yum Repo..." 91 | 92 | yum -y install expect\ 93 | epel-release \ 94 | yum-utils 95 | 96 | yum -y install http://rpms.remirepo.net/enterprise/remi-release-7.rpm 97 | 98 | yum-config-manager --enable remi-php73 99 | 100 | cat < /etc/yum.repos.d/MariaDB.repo 101 | 102 | [mariadb] 103 | name = MariaDB 104 | baseurl = http://yum.mariadb.org/10.1/centos7-amd64 105 | gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB 106 | gpgcheck=1 107 | 108 | EOF 109 | 110 | 111 | } 112 | 113 | InstallDataBase () { 114 | 115 | echo "Remove old database..." 116 | 117 | yum -y remove \ 118 | mariadb-server \ 119 | mariadb \ 120 | mariadb-config \ 121 | mariadb-libs \ 122 | mariadb-common 123 | 124 | echo "Install MariaDB 10.0u..." 125 | 126 | yum -y install \ 127 | MariaDB-server \ 128 | MariaDB-client 129 | 130 | echo "Enable service..." 131 | 132 | systemctl enable --now mariadb 133 | 134 | } 135 | 136 | SetDataBaseSecure () { 137 | 138 | echo "Running mysql_secure_installation..." 139 | 140 | SECURE_MYSQL=$(expect -c " 141 | set timeout 10 142 | spawn mysql_secure_installation 143 | expect \"Enter current password for root (enter for none):\" 144 | send \"$MYSQL_ROOT_PASSWORD\r\" 145 | expect \"Set the root password?\" 146 | send \"y\r\" 147 | expect \"New password:\" 148 | send \"$MYSQL_NEW_ROOT_PASSWORD\r\" 149 | expect \"Re-enter new password:\" 150 | send \"$MYSQL_NEW_ROOT_PASSWORD\r\" 151 | expect \"Remove anonymous users?\" 152 | send \"y\r\" 153 | expect \"Disallow root login remotely?\" 154 | send \"y\r\" 155 | expect \"Remove test database and access to it?\" 156 | send \"y\r\" 157 | expect \"Reload privilege tables now?\" 158 | send \"y\r\" 159 | expect eof 160 | ") 161 | 162 | echo "$SECURE_MYSQL" 163 | 164 | } 165 | 166 | 167 | CreateDataBase () { 168 | 169 | echo "Creating database $DBNAME..." 170 | 171 | $MYSQL -e "create database $DBNAME character set utf8;" 172 | 173 | $MYSQL -e "create user $DBUSER@localhost identified by '"$DBPASS"';" 174 | 175 | $MYSQL -e "grant all privileges on $DBNAME.* to $DBUSER@localhost;" 176 | 177 | } 178 | 179 | InstallApache () { 180 | 181 | echo "Installing Apache..." 182 | 183 | yum -y install \ 184 | httpd \ 185 | mod_ssl 186 | 187 | } 188 | 189 | 190 | InstallPhp () { 191 | 192 | echo "Remove old PHP..." 193 | 194 | yum -y remove \ 195 | php-cli \ 196 | mod_php \ 197 | php-common 198 | 199 | echo "Install php73..." 200 | 201 | yum -y install \ 202 | mod_php \ 203 | php-cli \ 204 | php-mysqlnd 205 | 206 | yum -y install \ 207 | php-pear-CAS \ 208 | wget \ 209 | php-json \ 210 | php-mbstring \ 211 | php-mysqli \ 212 | php-session \ 213 | php-gd \ 214 | php-curl \ 215 | php-domxml \ 216 | php-imap \ 217 | php-ldap \ 218 | php-openssl \ 219 | php-opcache \ 220 | php-apcu \ 221 | php-xmlrpc \ 222 | php-intl \ 223 | php-zip \ 224 | php-sodium 225 | php-ZendFramework-Cache-Backend-Apc \ 226 | jq \ 227 | openssl 228 | 229 | } 230 | 231 | 232 | SetPhpIni () { 233 | 234 | echo "Setting 99-glpi.ini..." 235 | 236 | cat < /etc/php.d/99-glpi.ini 237 | memory_limit = 64M ; 238 | file_uploads = on ; 239 | max_execution_time = 600 ; 240 | register_globals = off ; 241 | magic_quotes_sybase = off ; 242 | session.auto_start = off ; 243 | session.use_trans_sid = 0 ; 244 | EOF 245 | 246 | 247 | cat < /etc/php.d/99-timezone.ini 248 | [Date] 249 | date.timezone = $TIMEZONE ; 250 | EOF 251 | 252 | 253 | cat < /etc/php.d/99-apcu.ini 254 | apc.enable_cli = 1 ; 255 | EOF 256 | 257 | 258 | } 259 | 260 | Install () { 261 | 262 | echo "Download and install GLPI $VERSION ..." 263 | curl -sSL https://github.com/glpi-project/glpi/releases/download/$VERSION/glpi-$VERSION.tgz | tar -zxf - -C /var/www/html/ 264 | 265 | } 266 | 267 | 268 | SetPermission () { 269 | chown -Rf apache:apache /var/www/html/glpi 270 | } 271 | 272 | 273 | SetHttpConf () { 274 | 275 | cat < /etc/httpd/conf.d/glpi.conf 276 | 277 | ServerName ${FQDN} 278 | DocumentRoot /var/www/html/glpi 279 | 280 | Options Indexes FollowSymLinks 281 | AllowOverride All 282 | Require all granted 283 | 284 | 285 | EOF 286 | 287 | } 288 | 289 | 290 | DisableSELinux () { 291 | 292 | sed -i s/enforcing/permissive/g /etc/selinux/config 293 | 294 | setenforce 0 295 | 296 | } 297 | 298 | 299 | EnableSELinux () { 300 | 301 | chcon -R -t httpd_sys_rw_content_t /var/www/html/glpi/ 302 | setsebool -P httpd_can_network_connect 1 303 | setsebool -P httpd_can_network_connect_db 1 304 | setsebool -P httpd_can_sendmail 1 305 | setenforce 1 306 | 307 | } 308 | 309 | StartHttpd () { 310 | 311 | echo "Start HTTPD..." 312 | 313 | systemctl enable --now httpd 314 | 315 | } 316 | 317 | 318 | DeployDataBase () { 319 | 320 | local SUBVERSION=`echo $VERSION | cut -d . -f 2` 321 | 322 | if [ $SUBVERSION -ge 4 ]; then 323 | echo "Deploy DB using bin/console. Please wait..." 324 | /usr/bin/php /var/www/html/glpi/bin/console glpi:database:install \ 325 | --no-interaction \ 326 | --db-host=${DBHOST} \ 327 | --db-port=${DBPORT} \ 328 | --db-name=${DBNAME} \ 329 | --db-user=${DBUSER} \ 330 | --db-password=${DBPASS} \ 331 | --default-language=${GLPI_LANG} 332 | else 333 | echo "Deploy DB using cliinstall.php. Please wait..." 334 | /usr/bin/php /var/www/html/glpi/scripts/cliinstall.php \ 335 | --host=${DBHOST} \ 336 | --hostport=${DBPORT} \ 337 | --db=$DBNAME \ 338 | --user=$DBUSER \ 339 | --pass=$DBPASS \ 340 | --lang=$GLPI_LANG 341 | fi 342 | } 343 | 344 | 345 | GetCurrentVersion () { 346 | echo "{ `curl -s http://localhost/glpi/ajax/telemetry.php | grep -v code` }" | jq -r '.glpi.version' 347 | } 348 | 349 | GetTelemetry () { 350 | echo "{ `curl -s http://localhost/glpi/ajax/telemetry.php | grep -v code` }" 351 | } 352 | 353 | 354 | InstallBackupJob () { 355 | 356 | 357 | cat < /etc/cron.daily/backup-glpi.sh 358 | #!/bin/sh 359 | 360 | # Backup Banco GLPI 361 | 362 | mysqldump -u ${DBUSER} -p${DBPASS} ${DBNAME} | gzip > /var/www/html/glpi/files/_dumps/glpi-${VERSION}-\`date +%Y-%m-%d-%H-%M\`.sql.gz 363 | 364 | EXITVALUE=\$? 365 | if [ \$EXITVALUE != 0 ]; then 366 | /usr/bin/logger -t GLPI "ALERT exited abnormally with [\$EXITVALUE]" 367 | fi 368 | 369 | chown apache.apache /var/www/html/glpi/files/_dumps/*.sql.gz 370 | 371 | # Backup completo para dentro de /backup/ 372 | 373 | if [ ! -d /backup ]; then 374 | mkdir -p /backup 375 | fi 376 | tar -zcf /backup/backup-${VERSION}-\`date +%Y-%m-%d-%H-%M\`.tar.gz /var/www/html/glpi 377 | 378 | EXITVALUE=\$? 379 | if [ \$EXITVALUE != 0 ]; then 380 | /usr/bin/logger -t GLPI "ALERT exited abnormally with [\$EXITVALUE]" 381 | fi 382 | 383 | 384 | # Apagar backup com mais de 30d 385 | 386 | find /var/www/html/glpi/files/_dumps/ -mtime +30 -delete 387 | EXITVALUE=\$? 388 | if [ \$EXITVALUE != 0 ]; then 389 | /usr/bin/logger -t GLPI "ALERT exited abnormally with [\$EXITVALUE]" 390 | fi 391 | 392 | exit 0 393 | 394 | EOF 395 | 396 | chmod +x /etc/cron.daily/backup-glpi.sh 397 | 398 | } 399 | 400 | 401 | EXECUTE=" 402 | Log 403 | DisableSELinux 404 | DisableFirewall 405 | InstallRepo 406 | InstallDataBase 407 | SetDataBaseSecure 408 | CreateDataBase 409 | InstallApache 410 | InstallPhp 411 | SetPhpIni 412 | Install 413 | SetHttpConf 414 | StartHttpd 415 | DeployDataBase 416 | SetPermission 417 | InstallBackupJob 418 | " 419 | 420 | 421 | for job in $EXECUTE; do 422 | 423 | echo "Run $job... " 424 | 425 | $job >> $LOGS 2>&1 426 | 427 | if [ $? -eq 0 ]; then 428 | echo "ok" 429 | else 430 | echo "fail" 431 | fi 432 | done 433 | 434 | GetTelemetry >> $LOGS 435 | -------------------------------------------------------------------------------- /kubernetes/glpi-configmap.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: ConfigMap 3 | metadata: 4 | name: glpi-config 5 | data: 6 | GLPI_LANG: "pt_BR" 7 | VERSION: "9.5.6" 8 | PLUGINS: "all" 9 | -------------------------------------------------------------------------------- /kubernetes/glpi-cronjob.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: batch/v1 2 | kind: CronJob 3 | metadata: 4 | name: glpi-cronjob 5 | labels: 6 | app: glpi 7 | spec: 8 | schedule: "*/1 * * * *" 9 | jobTemplate: 10 | spec: 11 | template: 12 | spec: 13 | containers: 14 | - image: fametec/glpi:9.5.6 15 | imagePullPolicy: Always 16 | name: glpi-cronjob 17 | volumeMounts: 18 | - name: files-glpi-persistent-storage 19 | mountPath: /var/www/html/files 20 | - name: plugins-glpi-persistent-storage 21 | mountPath: /var/www/html/plugins 22 | - name: config-glpi-persistent-storage 23 | mountPath: /var/www/html/config 24 | command: 25 | - /usr/bin/php 26 | - -c 27 | - /etc/php.ini 28 | - /var/www/html/front/cron.php 29 | 30 | volumes: 31 | - name: files-glpi-persistent-storage 32 | persistentVolumeClaim: 33 | claimName: files-glpi-pv-claim 34 | - name: plugins-glpi-persistent-storage 35 | persistentVolumeClaim: 36 | claimName: plugins-glpi-pv-claim 37 | - name: config-glpi-persistent-storage 38 | persistentVolumeClaim: 39 | claimName: config-glpi-pv-claim 40 | restartPolicy: OnFailure 41 | 42 | -------------------------------------------------------------------------------- /kubernetes/glpi-deployment.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: apps/v1 2 | kind: Deployment 3 | metadata: 4 | name: glpi 5 | labels: 6 | app: glpi 7 | spec: 8 | replicas: 1 9 | selector: 10 | matchLabels: 11 | app: glpi 12 | template: 13 | metadata: 14 | labels: 15 | app: glpi 16 | spec: 17 | containers: 18 | - image: fametec/glpi:9.5.6 19 | imagePullPolicy: Always 20 | name: glpi 21 | env: 22 | - name: MARIADB_DATABASE 23 | valueFrom: 24 | secretKeyRef: 25 | name: mariadb-glpi-secret 26 | key: MYSQL_DATABASE 27 | - name: MARIADB_USER 28 | valueFrom: 29 | secretKeyRef: 30 | name: mariadb-glpi-secret 31 | key: MYSQL_USER 32 | - name: MARIADB_PASSWORD 33 | valueFrom: 34 | secretKeyRef: 35 | name: mariadb-glpi-secret 36 | key: MYSQL_PASSWORD 37 | envFrom: 38 | - configMapRef: 39 | name: glpi-config 40 | - secretRef: 41 | name: glpi-secret 42 | ports: 43 | - containerPort: 80 44 | name: glpi 45 | volumeMounts: 46 | - name: files-glpi-persistent-storage 47 | mountPath: /var/www/html/files 48 | - name: plugins-glpi-persistent-storage 49 | mountPath: /var/www/html/plugins 50 | - name: config-glpi-persistent-storage 51 | mountPath: /var/www/html/config 52 | volumes: 53 | - name: files-glpi-persistent-storage 54 | persistentVolumeClaim: 55 | claimName: files-glpi-pv-claim 56 | - name: plugins-glpi-persistent-storage 57 | persistentVolumeClaim: 58 | claimName: plugins-glpi-pv-claim 59 | - name: config-glpi-persistent-storage 60 | persistentVolumeClaim: 61 | claimName: config-glpi-pv-claim 62 | 63 | 64 | -------------------------------------------------------------------------------- /kubernetes/glpi-pv.yaml: -------------------------------------------------------------------------------- 1 | --- 2 | apiVersion: v1 3 | kind: PersistentVolume 4 | metadata: 5 | name: files-glpi-pv-volume 6 | labels: 7 | type: local 8 | spec: 9 | storageClassName: manual 10 | capacity: 11 | storage: 5Gi 12 | accessModes: 13 | - ReadWriteOnce 14 | hostPath: 15 | path: "/glpi/files" 16 | 17 | 18 | --- 19 | apiVersion: v1 20 | kind: PersistentVolume 21 | metadata: 22 | name: plugins-glpi-pv-volume 23 | labels: 24 | type: local 25 | spec: 26 | storageClassName: manual 27 | capacity: 28 | storage: 5Gi 29 | accessModes: 30 | - ReadWriteOnce 31 | hostPath: 32 | path: "/glpi/plugins" 33 | 34 | --- 35 | apiVersion: v1 36 | kind: PersistentVolume 37 | metadata: 38 | name: config-glpi-pv-volume 39 | labels: 40 | type: local 41 | spec: 42 | storageClassName: manual 43 | capacity: 44 | storage: 5Gi 45 | accessModes: 46 | - ReadWriteOnce 47 | hostPath: 48 | path: "/glpi/config" 49 | 50 | 51 | --- 52 | apiVersion: v1 53 | kind: PersistentVolumeClaim 54 | metadata: 55 | name: files-glpi-pv-claim 56 | spec: 57 | storageClassName: manual 58 | accessModes: 59 | - ReadWriteOnce 60 | resources: 61 | requests: 62 | storage: 5Gi 63 | 64 | 65 | --- 66 | apiVersion: v1 67 | kind: PersistentVolumeClaim 68 | metadata: 69 | name: plugins-glpi-pv-claim 70 | spec: 71 | storageClassName: manual 72 | accessModes: 73 | - ReadWriteOnce 74 | resources: 75 | requests: 76 | storage: 5Gi 77 | 78 | 79 | --- 80 | apiVersion: v1 81 | kind: PersistentVolumeClaim 82 | metadata: 83 | name: config-glpi-pv-claim 84 | spec: 85 | storageClassName: manual 86 | accessModes: 87 | - ReadWriteOnce 88 | resources: 89 | requests: 90 | storage: 5Gi 91 | -------------------------------------------------------------------------------- /kubernetes/glpi-secret.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: Secret 3 | metadata: 4 | name: glpi-secret 5 | type: Opaque 6 | data: 7 | MARIADB_HOST: bWFyaWFkYi1nbHBp 8 | MARIADB_PORT: MzMwNg== 9 | 10 | -------------------------------------------------------------------------------- /kubernetes/glpi-service.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: Service 3 | metadata: 4 | name: glpi 5 | labels: 6 | app: glpi 7 | spec: 8 | ports: 9 | - port: 80 10 | targetPort: 80 11 | nodePort: 30080 12 | selector: 13 | app: glpi 14 | type: NodePort 15 | -------------------------------------------------------------------------------- /kubernetes/mariadb-glpi-deployment.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: apps/v1 2 | kind: Deployment 3 | metadata: 4 | name: mariadb-glpi-deployment 5 | labels: 6 | app: glpi 7 | spec: 8 | replicas: 1 9 | selector: 10 | matchLabels: 11 | app: mariadb-glpi 12 | strategy: 13 | type: Recreate 14 | template: 15 | metadata: 16 | labels: 17 | app: mariadb-glpi 18 | spec: 19 | containers: 20 | - image: fametec/glpi:9.5.6-mariadb 21 | name: mariadb-glpi 22 | envFrom: 23 | - secretRef: 24 | name: mariadb-glpi-secret 25 | ports: 26 | - containerPort: 3306 27 | volumeMounts: 28 | - name: mariadb-glpi-persistent-storage 29 | mountPath: /var/lib/mysql 30 | volumes: 31 | - name: mariadb-glpi-persistent-storage 32 | persistentVolumeClaim: 33 | claimName: mariadb-pv-claim 34 | -------------------------------------------------------------------------------- /kubernetes/mariadb-glpi-pv.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: PersistentVolume 3 | metadata: 4 | name: mariadb-pv-volume 5 | labels: 6 | type: local 7 | 8 | spec: 9 | storageClassName: manual 10 | capacity: 11 | storage: 5Gi 12 | accessModes: 13 | - ReadWriteOnce 14 | hostPath: 15 | path: "/tmp/mariadb-glpi/data" 16 | 17 | 18 | --- 19 | apiVersion: v1 20 | kind: PersistentVolumeClaim 21 | metadata: 22 | name: mariadb-pv-claim 23 | 24 | spec: 25 | storageClassName: manual 26 | accessModes: 27 | - ReadWriteOnce 28 | resources: 29 | requests: 30 | storage: 5Gi 31 | 32 | 33 | -------------------------------------------------------------------------------- /kubernetes/mariadb-glpi-secret.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: Secret 3 | type: Opaque 4 | metadata: 5 | name: mariadb-glpi-secret 6 | data: 7 | MYSQL_RANDOM_ROOT_PASSWORD: eWVz 8 | MYSQL_DATABASE: Z2xwaQ== 9 | MYSQL_USER: Z2xwaQ== 10 | MYSQL_PASSWORD: Z2xwaQ== 11 | -------------------------------------------------------------------------------- /kubernetes/mariadb-glpi-service.yaml: -------------------------------------------------------------------------------- 1 | apiVersion: v1 2 | kind: Service 3 | metadata: 4 | name: mariadb-glpi 5 | labels: 6 | app: glpi 7 | spec: 8 | ports: 9 | - port: 3306 10 | selector: 11 | app: mariadb-glpi 12 | clusterIP: None 13 | -------------------------------------------------------------------------------- /topologia-docker-compose-glpi.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/fametec/glpi/0798ece6f6420a7d05b1a0650f3f74b563704653/topologia-docker-compose-glpi.png --------------------------------------------------------------------------------