├── .codespellrc ├── .github ├── ISSUE_TEMPLATE │ ├── bug_report.md │ └── feature_request.md ├── dependabot.yml ├── stale.yml └── workflows │ ├── auto-github-actions.yml │ ├── check-arduino.yml │ ├── report-size-deltas.yml │ └── spell-check.yml ├── .gitignore ├── CONTRIBUTING.md ├── LICENSE ├── LibraryPatches ├── Ethernet │ └── src │ │ ├── Ethernet.cpp │ │ ├── Ethernet.h │ │ ├── EthernetServer.cpp │ │ └── utility │ │ ├── w5100.cpp │ │ └── w5100.h ├── Ethernet2 │ └── src │ │ ├── Ethernet2.cpp │ │ ├── Ethernet2.h │ │ ├── EthernetUdp2.cpp │ │ └── EthernetUdp2.h ├── Ethernet3 │ └── src │ │ ├── Ethernet3.cpp │ │ └── Ethernet3.h ├── EthernetLarge │ └── src │ │ ├── EthernetLarge.cpp │ │ ├── EthernetLarge.h │ │ ├── EthernetServer.cpp │ │ └── utility │ │ ├── w5100.cpp │ │ └── w5100.h ├── UIPEthernet-2.0.9 │ ├── UIPEthernet.cpp │ ├── UIPEthernet.h │ └── utility │ │ ├── Enc28J60Network.cpp │ │ └── Enc28J60Network.h ├── UIPEthernet │ ├── UIPEthernet.cpp │ ├── UIPEthernet.h │ └── utility │ │ ├── Enc28J60Network.cpp │ │ └── Enc28J60Network.h └── esp32 │ └── cores │ └── esp32 │ └── Server.h ├── Packages_Patches ├── Fab_SAM_Arduino │ └── hardware │ │ ├── hardware │ │ └── 1.6.18-alpha2 │ │ │ └── boards.txt │ │ └── samd │ │ ├── 1.6.18-alpha2 │ │ └── boards.txt │ │ ├── 1.7.0 │ │ └── boards.txt │ │ ├── 1.8.0 │ │ └── boards.txt │ │ └── 1.9.0 │ │ └── boards.txt ├── Maixduino │ └── hardware │ │ └── k210 │ │ ├── 0.3.10 │ │ └── cores │ │ │ └── arduino │ │ │ └── Stream.h │ │ └── 0.3.11 │ │ └── cores │ │ └── arduino │ │ └── Stream.h ├── STM32 │ └── hardware │ │ └── stm32 │ │ ├── 1.9.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── NUCLEO_F767ZI │ │ │ └── variant.h │ │ │ └── NUCLEO_L053R8 │ │ │ └── variant.h │ │ ├── 2.0.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ ├── L052R(6-8)H_L053R(6-8)H │ │ │ └── variant_generic.h │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ ├── 2.1.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ ├── 2.2.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ └── 2.3.0 │ │ ├── system │ │ ├── STM32F4xx │ │ │ └── stm32f4xx_hal_conf_default.h │ │ └── STM32F7xx │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ ├── STM32F7xx │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ └── variant_NUCLEO_F767ZI.h │ │ └── STM32L0xx │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ └── variant_generic.h ├── Seeeduino │ └── hardware │ │ ├── nrf52 │ │ └── 1.0.0 │ │ │ ├── cores │ │ │ └── nRF5 │ │ │ │ ├── Print.cpp │ │ │ │ ├── Print.h │ │ │ │ └── Udp.h │ │ │ └── platform.txt │ │ ├── rp2040 │ │ ├── 1.9.3 │ │ │ └── variants │ │ │ │ └── rpipico │ │ │ │ └── pins_arduino.h │ │ └── 2.7.2 │ │ │ ├── boards.txt │ │ │ └── variants │ │ │ └── Seeed_XIAO_RP2040 │ │ │ └── pins_arduino.h │ │ └── samd │ │ ├── 1.7.0 │ │ └── boards.txt │ │ ├── 1.7.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.9 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.8.1 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.8.2 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ └── 1.8.3 │ │ ├── cores │ │ └── arduino │ │ │ ├── Arduino.h │ │ │ ├── Print.cpp │ │ │ └── Print.h │ │ └── platform.txt ├── SparkFun │ └── hardware │ │ └── samd │ │ └── 1.8.3 │ │ └── cores │ │ ├── arduino │ │ ├── Print.cpp │ │ └── Print.h │ │ └── arduino51 │ │ ├── Print.cpp │ │ └── Print.h ├── adafruit │ └── hardware │ │ ├── nrf52 │ │ ├── 0.19.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.20.1 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.20.5 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.21.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.22.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.22.1 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.23.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.24.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.0.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.1.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.2.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ └── 1.3.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ └── nRF5 │ │ │ │ ├── Print.cpp │ │ │ │ ├── Print.h │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ │ ├── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ │ └── sparkfun_nrf52840_mini │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ └── samd │ │ ├── 1.5.14 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.0 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.3 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.4 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.5 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.0 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.1 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.10 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.11 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.2 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.3 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.4 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.5 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ └── 1.7.9 │ │ ├── cores │ │ └── arduino │ │ │ ├── Print.cpp │ │ │ └── Print.h │ │ └── platform.txt ├── arduino │ └── hardware │ │ ├── mbed_portenta │ │ ├── 2.4.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.5.2 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.6.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.7.2 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.8.0 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.0.0 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.0.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.1.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.3.0 │ │ │ └── portenta_post_install.sh │ │ └── 3.4.1 │ │ │ └── portenta_post_install.sh │ │ ├── sam │ │ └── 1.6.12 │ │ │ └── platform.txt │ │ └── samd │ │ ├── 1.8.10 │ │ └── platform.txt │ │ ├── 1.8.11 │ │ └── platform.txt │ │ ├── 1.8.12 │ │ └── platform.txt │ │ ├── 1.8.13 │ │ └── platform.txt │ │ ├── 1.8.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ ├── 1.8.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ ├── 1.8.8 │ │ ├── cores │ │ │ ├── Arduino.h │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ └── 1.8.9 │ │ ├── cores │ │ └── arduino │ │ │ └── Arduino.h │ │ └── platform.txt ├── hardware │ └── teensy │ │ └── avr │ │ ├── boards.txt │ │ └── cores │ │ ├── teensy │ │ ├── Stream.cpp │ │ └── Stream.h │ │ ├── teensy3 │ │ ├── Stream.cpp │ │ └── Stream.h │ │ └── teensy4 │ │ ├── Stream.cpp │ │ └── Stream.h ├── industrialshields │ └── hardware │ │ └── avr │ │ ├── 1.1.36 │ │ └── cores │ │ │ └── industrialshields │ │ │ └── Udp.h │ │ └── 1.1.37 │ │ └── cores │ │ └── industrialshields │ │ └── Udp.h ├── realtek │ └── hardware │ │ └── AmebaD │ │ ├── 3.0.10 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.0.8 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.0 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.1 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.2 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.3 │ │ └── cores │ │ │ └── ambd │ │ │ └── avr │ │ │ └── pgmspace.h │ │ └── 3.1.4 │ │ └── cores │ │ └── ambd │ │ └── avr │ │ └── pgmspace.h └── rp2040 │ └── hardware │ └── rp2040 │ ├── 1.2.1 │ └── platform.txt │ ├── 1.2.2 │ └── platform.txt │ ├── 1.3.0 │ └── platform.txt │ ├── 1.3.1 │ ├── cores │ │ └── rp2040 │ │ │ └── Arduino.h │ └── platform.txt │ └── 1.4.0 │ ├── cores │ └── rp2040 │ │ └── Arduino.h │ └── platform.txt ├── README.md ├── changelog.md ├── examples ├── Alarm │ ├── ESP │ │ ├── Alarm_ESP │ │ │ ├── Alarm_ESP.ino │ │ │ └── defines.h │ │ └── Alarm_ESP_Complex │ │ │ ├── Alarm_ESP_Complex.ino │ │ │ └── defines.h │ ├── Ethernet │ │ ├── Alarm_Ethernet │ │ │ ├── Alarm_Ethernet.ino │ │ │ └── defines.h │ │ └── Alarm_STM32_Ethernet │ │ │ ├── Alarm_STM32_Ethernet.ino │ │ │ └── defines.h │ ├── Portenta_H7_WiFi │ │ └── Alarm_WiFi │ │ │ ├── Alarm_WiFi.ino │ │ │ └── defines.h │ └── WiFiNINA │ │ └── Alarm_WiFiNINA │ │ ├── Alarm_WiFiNINA.ino │ │ └── defines.h ├── Time │ ├── ESP │ │ ├── RTC_ESP │ │ │ ├── RTC_ESP.ino │ │ │ └── defines.h │ │ └── RTC_ESP_Complex │ │ │ ├── RTC_ESP_Complex.ino │ │ │ └── defines.h │ ├── Ethernet │ │ ├── RTC_Ethernet │ │ │ ├── RTC_Ethernet.ino │ │ │ └── defines.h │ │ └── RTC_STM32_Ethernet │ │ │ ├── RTC_STM32_Ethernet.ino │ │ │ └── defines.h │ ├── Portenta_H7_WiFi │ │ └── RTC_WiFi │ │ │ ├── RTC_WiFi.ino │ │ │ └── defines.h │ └── WiFiNINA │ │ └── RTC_WiFiNINA │ │ ├── RTC_WiFiNINA.ino │ │ └── defines.h ├── WriteRules │ └── WriteRules.ino └── tzTest │ └── tzTest.ino ├── keywords.txt ├── library.json ├── library.properties ├── platformio └── platformio.ini ├── src ├── DS323x_Generic.h └── DateTime_Generic.h └── utils ├── astyle_library.conf └── restyle.sh /.codespellrc: -------------------------------------------------------------------------------- 1 | # See: https://github.com/codespell-project/codespell#using-a-config-file 2 | [codespell] 3 | # In the event of a false positive, add the problematic word, in all lowercase, to a comma-separated list here: 4 | ignore-words-list = , 5 | check-filenames = 6 | check-hidden = 7 | skip = ./.git,./src,./examples,./Packages_Patches,./LibraryPatches 8 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/bug_report.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Bug report 3 | about: Create a report to help us improve 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | ### Describe the bug 11 | 12 | A clear and concise description of what the bug is. 13 | 14 | ### Steps to Reproduce 15 | 16 | Steps to reproduce the behavior. Including the [MRE](https://stackoverflow.com/help/minimal-reproducible-example) sketches 17 | 18 | ### Expected behavior 19 | 20 | A clear and concise description of what you expected to happen. 21 | 22 | ### Actual behavior 23 | 24 | A clear and concise description of what you expected to happen. 25 | 26 | ### Debug and AT-command log (if applicable) 27 | 28 | A clear and concise description of what you expected to happen. 29 | 30 | ### Screenshots 31 | 32 | If applicable, add screenshots to help explain your problem. 33 | 34 | ### Information 35 | 36 | Please ensure to specify the following: 37 | 38 | * Arduino IDE version (e.g. 1.8.13) or Platform.io version 39 | * `ESP8266`,`ESP32` or `STM32` Core Version (e.g. ESP8266 core v2.7.4, ESP32 v1.0.5 or STM32 v1.9.0) 40 | * Contextual information (e.g. what you were trying to achieve) 41 | * Simplest possible steps to reproduce 42 | * Anything that might be relevant in your opinion, such as: 43 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 44 | * Network configuration 45 | 46 | ### Example 47 | 48 | ``` 49 | Arduino IDE version: 1.8.13 50 | ESP32 Core Version 1.0.5 51 | OS: Ubuntu 20.04 LTS 52 | Linux xy-Inspiron-3593 5.4.0-66-generic #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux 53 | 54 | Context: 55 | I encountered an endless loop while trying to connect to Local WiFi. 56 | 57 | Steps to reproduce: 58 | 1. ... 59 | 2. ... 60 | 3. ... 61 | 4. ... 62 | ``` 63 | 64 | ### Additional context 65 | 66 | Add any other context about the problem here. 67 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/feature_request.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Feature request 3 | about: Suggest an idea for this project 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | **Is your feature request related to a problem? Please describe.** 11 | A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] 12 | 13 | **Describe the solution you'd like** 14 | A clear and concise description of what you want to happen. 15 | 16 | **Describe alternatives you've considered** 17 | A clear and concise description of any alternative solutions or features you've considered. 18 | 19 | **Additional context** 20 | Add any other context or screenshots about the feature request here. 21 | -------------------------------------------------------------------------------- /.github/dependabot.yml: -------------------------------------------------------------------------------- 1 | # See: https://docs.github.com/en/github/administering-a-repository/configuration-options-for-dependency-updates#about-the-dependabotyml-file 2 | version: 2 3 | 4 | updates: 5 | # Configure check for outdated GitHub Actions actions in workflows. 6 | # See: https://docs.github.com/en/github/administering-a-repository/keeping-your-actions-up-to-date-with-dependabot 7 | - package-ecosystem: github-actions 8 | directory: / # Check the repository's workflows under /.github/workflows/ 9 | schedule: 10 | interval: daily 11 | -------------------------------------------------------------------------------- /.github/stale.yml: -------------------------------------------------------------------------------- 1 | # Configuration for probot-stale - https://github.com/probot/stale 2 | 3 | daysUntilStale: 60 4 | daysUntilClose: 14 5 | limitPerRun: 30 6 | staleLabel: stale 7 | exemptLabels: 8 | - pinned 9 | - security 10 | - "to be implemented" 11 | - "for reference" 12 | - "move to PR" 13 | - "enhancement" 14 | 15 | only: issues 16 | onlyLabels: [] 17 | exemptProjects: false 18 | exemptMilestones: false 19 | exemptAssignees: false 20 | 21 | markComment: > 22 | [STALE_SET] This issue has been automatically marked as stale because it has not had 23 | recent activity. It will be closed in 14 days if no further activity occurs. Thank you 24 | for your contributions. 25 | 26 | unmarkComment: > 27 | [STALE_CLR] This issue has been removed from the stale queue. Please ensure activity to keep it opening the future. 28 | 29 | closeComment: > 30 | [STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions. 31 | 32 | -------------------------------------------------------------------------------- /.github/workflows/auto-github-actions.yml: -------------------------------------------------------------------------------- 1 | name: auto-github-actions 2 | on: [push] 3 | jobs: 4 | check-bats-version: 5 | runs-on: ubuntu-latest 6 | steps: 7 | - uses: actions/checkout@v3 8 | - uses: actions/setup-node@v3 9 | with: 10 | node-version: '14' 11 | - run: npm install -g bats 12 | - run: bats -v 13 | -------------------------------------------------------------------------------- /.github/workflows/check-arduino.yml: -------------------------------------------------------------------------------- 1 | name: Check Arduino 2 | 3 | # See: https://docs.github.com/en/free-pro-team@latest/actions/reference/events-that-trigger-workflows 4 | on: 5 | push: 6 | pull_request: 7 | schedule: 8 | # Run every Tuesday at 8 AM UTC to catch breakage caused by new rules added to Arduino Lint. 9 | - cron: "0 8 * * TUE" 10 | workflow_dispatch: 11 | repository_dispatch: 12 | 13 | jobs: 14 | lint: 15 | runs-on: ubuntu-latest 16 | 17 | steps: 18 | - name: Checkout repository 19 | uses: actions/checkout@v3 20 | 21 | - name: Arduino Lint 22 | uses: arduino/arduino-lint-action@v1 23 | with: 24 | compliance: specification 25 | library-manager: update 26 | # Always use this setting for official repositories. Remove for 3rd party projects. 27 | official: true 28 | project-type: library 29 | -------------------------------------------------------------------------------- /.github/workflows/report-size-deltas.yml: -------------------------------------------------------------------------------- 1 | name: Report Size Deltas 2 | 3 | on: 4 | schedule: 5 | - cron: '*/5 * * * *' 6 | 7 | jobs: 8 | report: 9 | runs-on: ubuntu-latest 10 | 11 | steps: 12 | - name: Comment size deltas reports to PRs 13 | uses: arduino/report-size-deltas@v1 14 | with: 15 | # The name of the workflow artifact created by the "Compile Examples" workflow 16 | sketches-reports-source: sketches-reports 17 | -------------------------------------------------------------------------------- /.github/workflows/spell-check.yml: -------------------------------------------------------------------------------- 1 | name: Spell Check 2 | 3 | on: 4 | pull_request: 5 | push: 6 | schedule: 7 | # run every Tuesday at 3 AM UTC 8 | - cron: "0 3 * * 2" 9 | workflow_dispatch: 10 | repository_dispatch: 11 | 12 | jobs: 13 | spellcheck: 14 | runs-on: ubuntu-latest 15 | 16 | steps: 17 | - name: Checkout 18 | uses: actions/checkout@v3 19 | 20 | # See: https://github.com/codespell-project/actions-codespell/blob/master/README.md 21 | - name: Spell check 22 | uses: codespell-project/actions-codespell@master 23 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Prerequisites 2 | *.d 3 | 4 | # Compiled Object files 5 | *.slo 6 | *.lo 7 | *.o 8 | *.obj 9 | 10 | # Precompiled Headers 11 | *.gch 12 | *.pch 13 | 14 | # Compiled Dynamic libraries 15 | *.so 16 | *.dylib 17 | *.dll 18 | 19 | # Fortran module files 20 | *.mod 21 | *.smod 22 | 23 | # Compiled Static libraries 24 | *.lai 25 | *.la 26 | *.a 27 | *.lib 28 | 29 | # Executables 30 | *.exe 31 | *.out 32 | *.app 33 | -------------------------------------------------------------------------------- /CONTRIBUTING.md: -------------------------------------------------------------------------------- 1 | ## Contributing to DS323x_Generic 2 | 3 | ### Reporting Bugs 4 | 5 | Please report bugs in DS323x_Generic if you find them. 6 | 7 | However, before reporting a bug please check through the following: 8 | 9 | * [Existing Open Issues](https://github.com/khoih-prog/DS323x_Generic/issues) - someone might have already encountered this. 10 | 11 | If you don't find anything, please [open a new issue](https://github.com/khoih-prog/DS323x_Generic/issues/new). 12 | 13 | ### How to submit a bug report 14 | 15 | Please ensure to specify the following: 16 | 17 | * Arduino IDE version (e.g. 1.8.19) or Platform.io version 18 | * Board Core Version (e.g. Arduino SAMDUE core v1.6.12, ESP32 core v2.0.2, ESP8266 core v3.0.2, ArduinoCore-mbed v3.0.1, etc.) 19 | * Contextual information (e.g. what you were trying to achieve) 20 | * Simplest possible steps to reproduce 21 | * Anything that might be relevant in your opinion, such as: 22 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 23 | * Network configuration 24 | 25 | 26 | ### Example 27 | 28 | ``` 29 | Arduino IDE version: 1.8.19 30 | MBED RASPBERRY_PI_PICO board 31 | ArduinoCore-mbed v3.0.1 32 | OS: Ubuntu 20.04 LTS 33 | Linux xy-Inspiron-3593 5.13.0-39-generic #44~20.04.1-Ubuntu SMP Thu Mar 24 16:43:35 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux 34 | 35 | Context: 36 | I encountered an endless loop while trying to connect to Local WiFi. 37 | 38 | Steps to reproduce: 39 | 1. ... 40 | 2. ... 41 | 3. ... 42 | 4. ... 43 | ``` 44 | 45 | ### Sending Feature Requests 46 | 47 | Feel free to post feature requests. It's helpful if you can explain exactly why the feature would be useful. 48 | 49 | There are usually some outstanding feature requests in the [existing issues list](https://github.com/khoih-prog/DS323x_Generic/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement), feel free to add comments to them. 50 | 51 | ### Sending Pull Requests 52 | 53 | Pull Requests with changes and fixes are also welcome! 54 | 55 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | The MIT License (MIT) 2 | 3 | Copyright (c) 2020 Khoi Hoang 4 | 5 | Permission is hereby granted, free of charge, to any person obtaining a copy 6 | of this software and associated documentation files (the "Software"), to deal 7 | in the Software without restriction, including without limitation the rights 8 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 9 | copies of the Software, and to permit persons to whom the Software is 10 | furnished to do so, subject to the following conditions: 11 | 12 | The above copyright notice and this permission notice shall be included in all 13 | copies or substantial portions of the Software. 14 | 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 18 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 20 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 21 | SOFTWARE. 22 | 23 | -------------------------------------------------------------------------------- /LibraryPatches/Ethernet2/src/Ethernet2.h: -------------------------------------------------------------------------------- 1 | /* 2 | modified 12 Aug 2013 3 | by Soohwan Kim (suhwan@wiznet.co.kr) 4 | 5 | - 10 Apr. 2015 6 | Added support for Arduino Ethernet Shield 2 7 | by Arduino.org team 8 | 9 | */ 10 | #ifndef ethernet_h 11 | #define ethernet_h 12 | 13 | #include 14 | #include "utility/w5500.h" 15 | #include "IPAddress.h" 16 | #include "EthernetClient.h" 17 | #include "EthernetServer.h" 18 | #include "Dhcp.h" 19 | 20 | 21 | 22 | class EthernetClass { 23 | private: 24 | IPAddress _dnsServerAddress; 25 | char* _dnsDomainName; 26 | char* _hostName; 27 | DhcpClass* _dhcp; 28 | 29 | // KH add to work with new func void MACAddress(uint8_t *mac_address); and SinricPro v2.5.1+ 30 | uint8_t _mac_address[6] ={0,}; 31 | ////// 32 | 33 | public: 34 | uint8_t w5500_cspin; 35 | 36 | static uint8_t _state[MAX_SOCK_NUM]; 37 | static uint16_t _server_port[MAX_SOCK_NUM]; 38 | 39 | EthernetClass() { _dhcp = NULL; w5500_cspin = 10; } 40 | void init(uint8_t _cspin = 10) { w5500_cspin = _cspin; } 41 | 42 | #if defined(WIZ550io_WITH_MACADDRESS) 43 | // Initialize function when use the ioShield serise (included WIZ550io) 44 | // WIZ550io has a MAC address which is written after reset. 45 | // Default IP, Gateway and subnet address are also writen. 46 | // so, It needs some initial time. please refer WIZ550io Datasheet in details. 47 | int begin(void); 48 | void begin(IPAddress local_ip); 49 | void begin(IPAddress local_ip, IPAddress dns_server); 50 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 51 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 52 | #else 53 | // Initialize the Ethernet shield to use the provided MAC address and gain the rest of the 54 | // configuration through DHCP. 55 | // Returns 0 if the DHCP configuration failed, and 1 if it succeeded 56 | int begin(uint8_t *mac_address); 57 | void begin(uint8_t *mac_address, IPAddress local_ip); 58 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server); 59 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 60 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 61 | 62 | #endif 63 | 64 | int maintain(); 65 | 66 | // KH add to report link status 67 | uint8_t link(); // returns the linkstate, 1 = linked, 0 = no link 68 | const char* linkReport(); // returns the linkstate as a string 69 | ////// 70 | 71 | // KH add to have similar function to Ethernet lib 72 | // Certainly we can use void macAddress(uint8_t mac[]) to read from W5x00. 73 | void MACAddress(uint8_t *mac_address) 74 | { 75 | memcpy(mac_address, _mac_address, sizeof(_mac_address)); 76 | } 77 | ////// 78 | 79 | IPAddress localIP(); 80 | IPAddress subnetMask(); 81 | IPAddress gatewayIP(); 82 | IPAddress dnsServerIP(); 83 | char* dnsDomainName(); 84 | char* hostName(); 85 | 86 | friend class EthernetClient; 87 | friend class EthernetServer; 88 | }; 89 | 90 | extern EthernetClass Ethernet; 91 | 92 | #endif 93 | -------------------------------------------------------------------------------- /LibraryPatches/esp32/cores/esp32/Server.h: -------------------------------------------------------------------------------- 1 | /* 2 | Server.h - Base class that provides Server 3 | Copyright (c) 2011 Adrian McEwen. All right reserved. 4 | 5 | This library is free software; you can redistribute it and/or 6 | modify it under the terms of the GNU Lesser General Public 7 | License as published by the Free Software Foundation; either 8 | version 2.1 of the License, or (at your option) any later version. 9 | 10 | This library is distributed in the hope that it will be useful, 11 | but WITHOUT ANY WARRANTY; without even the implied warranty of 12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 | Lesser General Public License for more details. 14 | 15 | You should have received a copy of the GNU Lesser General Public 16 | License along with this library; if not, write to the Free Software 17 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 18 | */ 19 | 20 | #ifndef server_h 21 | #define server_h 22 | 23 | #include "Print.h" 24 | 25 | class Server: public Print 26 | { 27 | public: 28 | // KH, change to fix compiler error for EthernetWebServer 29 | // error: cannot declare field 'EthernetWebServer::_server' to be of abstract type 'EthernetServer' 30 | // virtual void begin(uint16_t port=0) =0; 31 | //virtual void begin() = 0; 32 | void begin() {}; 33 | }; 34 | 35 | #endif 36 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/nrf52/1.0.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/1.9.3/variants/rpipico/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | 3 | // Pin definitions taken from: 4 | // https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf 5 | 6 | //KH 7 | // Pin count 8 | // ---- 9 | #define PINS_COUNT (30u) 10 | #define NUM_DIGITAL_PINS (30u) 11 | #define NUM_ANALOG_INPUTS (4u) 12 | #define NUM_ANALOG_OUTPUTS (0u) 13 | ////// 14 | 15 | // LEDs 16 | #define PIN_LED (25u) 17 | #define PIN_LED_0 (16u) 18 | #define PIN_LED_1 (17u) 19 | #define PIN_LED_2 (18u) 20 | // Serial 21 | #define PIN_SERIAL1_TX (0u) 22 | #define PIN_SERIAL1_RX (1u) 23 | 24 | #define PIN_SERIAL2_TX (31u) 25 | #define PIN_SERIAL2_RX (31u) 26 | 27 | 28 | // SPI 29 | #define PIN_SPI0_MISO (4u) 30 | #define PIN_SPI0_MOSI (3u) 31 | #define PIN_SPI0_SCK (2u) 32 | #define PIN_SPI0_SS (5u) 33 | 34 | // static const int SS = PIN_SPI0_SS; // SPI Slave SS not used. Set here only for reference. 35 | // static const int MOSI = PIN_SPI0_MOSI; 36 | // static const int MISO = PIN_SPI0_MISO; 37 | // static const int SCK = PIN_SPI0_SCK; 38 | 39 | #define PIN_SPI1_MISO (12u) 40 | #define PIN_SPI1_MOSI (31u) 41 | #define PIN_SPI1_SCK (31u) 42 | #define PIN_SPI1_SS (31u) 43 | // static const int MISO_1 = PIN_SPI1_MISO; 44 | 45 | #define PIN_A0 (26u) 46 | #define PIN_A1 (27u) 47 | #define PIN_A2 (28u) 48 | #define PIN_A3 (29u) 49 | 50 | static const int A0 = PIN_A0; 51 | static const int A1 = PIN_A1; 52 | static const int A2 = PIN_A2; 53 | static const int A3 = PIN_A3; 54 | 55 | // D0 - D10 56 | #define D26 (26u) 57 | #define D1 (27u) 58 | #define D2 (28u) 59 | #define D3 (29u) 60 | #define D4 (6u) 61 | #define D5 (7u) 62 | #define D0 (0u) 63 | #define D7 (1u) 64 | #define D8 (2u) 65 | #define D9 (4u) 66 | #define D10 (3u) 67 | 68 | // static const int 0 = D0; 69 | 70 | // Wire 71 | #define PIN_WIRE0_SDA (6u) 72 | #define PIN_WIRE0_SCL (7u) 73 | 74 | #define PIN_WIRE1_SDA (26u) 75 | #define PIN_WIRE1_SCL (27u) 76 | 77 | // #define SERIAL_HOWMANY (3u) 78 | // #define SPI_HOWMANY (2u) 79 | // #define WIRE_HOWMANY (2u) 80 | 81 | // #include "../generic/common.h" 82 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | #include 3 | #include 4 | 5 | #ifndef __PINS_ARDUINO__ 6 | #define __PINS_ARDUINO__ 7 | 8 | #ifdef __cplusplus 9 | extern "C" unsigned int PINCOUNT_fn(); 10 | #endif 11 | 12 | // Pin count 13 | // ---- 14 | #define PINS_COUNT (PINCOUNT_fn()) 15 | #define NUM_DIGITAL_PINS (30u) 16 | #define NUM_ANALOG_INPUTS (4u) 17 | #define NUM_ANALOG_OUTPUTS (0u) 18 | 19 | extern PinName digitalPinToPinName(pin_size_t P); 20 | 21 | // LEDs 22 | // ---- 23 | #define PIN_LED (25u) 24 | #define LED_BUILTIN PIN_LED 25 | 26 | // Digital pins 27 | // ---- 28 | #define PIN_D0 (26u) 29 | #define PIN_D1 (27u) 30 | #define PIN_D2 (28u) 31 | #define PIN_D3 (29u) 32 | #define PIN_D4 (6u) 33 | #define PIN_D5 (7u) 34 | #define PIN_D6 (0u) 35 | #define PIN_D7 (1u) 36 | #define PIN_D8 (2u) 37 | #define PIN_D9 (4u) 38 | #define PIN_D10 (3u) 39 | 40 | static const uint8_t D0 = PIN_D0; 41 | static const uint8_t D1 = PIN_D1; 42 | static const uint8_t D2 = PIN_D2; 43 | static const uint8_t D3 = PIN_D3; 44 | static const uint8_t D4 = PIN_D4; 45 | static const uint8_t D5 = PIN_D5; 46 | static const uint8_t D6 = PIN_D6; 47 | static const uint8_t D7 = PIN_D7; 48 | static const uint8_t D8 = PIN_D8; 49 | static const uint8_t D9 = PIN_D9; 50 | static const uint8_t D10 = PIN_D10; 51 | 52 | 53 | // Analog pins 54 | // ----------- 55 | #define PIN_A0 (26u) 56 | #define PIN_A1 (27u) 57 | #define PIN_A2 (28u) 58 | #define PIN_A3 (29u) 59 | 60 | static const uint8_t A0 = PIN_A0; 61 | static const uint8_t A1 = PIN_A1; 62 | static const uint8_t A2 = PIN_A2; 63 | static const uint8_t A3 = PIN_A3; 64 | 65 | #define ADC_RESOLUTION 12 66 | 67 | // Serial 68 | #define PIN_SERIAL_TX (0ul) 69 | #define PIN_SERIAL_RX (1ul) 70 | 71 | // SPI 72 | //#define PIN_SPI_MISO (16u) 73 | //#define PIN_SPI_MOSI (19u) 74 | //#define PIN_SPI_SCK (18u) 75 | //#define PIN_SPI_SS (17u) 76 | // KH fix wrong pin 77 | #define PIN_SPI_MISO (D9) 78 | #define PIN_SPI_MOSI (D10) 79 | #define PIN_SPI_SCK (D8) 80 | #define PIN_SPI_SS (D7) 81 | ////// 82 | 83 | static const uint8_t SS = PIN_SPI_SS; // SPI Slave SS not used. Set here only for reference. 84 | static const uint8_t MOSI = PIN_SPI_MOSI; 85 | static const uint8_t MISO = PIN_SPI_MISO; 86 | static const uint8_t SCK = PIN_SPI_SCK; 87 | 88 | // Wire 89 | #define SDA (6u) 90 | #define SCL (7u) 91 | 92 | #define SERIAL_HOWMANY 1 93 | #define SERIAL1_TX (digitalPinToPinName(PIN_SERIAL_TX)) 94 | #define SERIAL1_RX (digitalPinToPinName(PIN_SERIAL_RX)) 95 | 96 | #define SERIAL_CDC 1 97 | #define HAS_UNIQUE_ISERIAL_DESCRIPTOR 98 | #define BOARD_VENDORID 0x2886 99 | #define BOARD_PRODUCTID 0x8042 100 | #define BOARD_NAME "RaspberryPi Pico" 101 | 102 | uint8_t getUniqueSerialNumber(uint8_t* name); 103 | void _ontouch1200bps_(); 104 | 105 | #define SPI_HOWMANY (1) 106 | #define SPI_MISO (digitalPinToPinName(PIN_SPI_MISO)) 107 | #define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI)) 108 | #define SPI_SCK (digitalPinToPinName(PIN_SPI_SCK)) 109 | 110 | #define WIRE_HOWMANY (1) 111 | #define I2C_SDA (digitalPinToPinName(SDA)) 112 | #define I2C_SCL (digitalPinToPinName(SCL)) 113 | 114 | #define digitalPinToPort(P) (digitalPinToPinName(P)/32) 115 | 116 | #define SERIAL_PORT_USBVIRTUAL SerialUSB 117 | #define SERIAL_PORT_MONITOR SerialUSB 118 | #define SERIAL_PORT_HARDWARE Serial1 119 | #define SERIAL_PORT_HARDWARE_OPEN Serial1 120 | 121 | #define USB_MAX_POWER (500) 122 | 123 | #endif //__PINS_ARDUINO__ 124 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/samd/1.7.7/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/samd/1.7.8/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/samd/1.7.9/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) 41 | { 42 | write_error = err; 43 | } 44 | public: 45 | Print() : write_error(0) {} 46 | 47 | int getWriteError() 48 | { 49 | return write_error; 50 | } 51 | void clearWriteError() 52 | { 53 | setWriteError(0); 54 | } 55 | 56 | virtual size_t write(uint8_t) = 0; 57 | size_t write(const char *str) 58 | { 59 | if (str == NULL) 60 | return 0; 61 | 62 | return write((const uint8_t *)str, strlen(str)); 63 | } 64 | virtual size_t write(const uint8_t *buffer, size_t size); 65 | size_t write(const char *buffer, size_t size) 66 | { 67 | return write((const uint8_t *)buffer, size); 68 | } 69 | 70 | // default to zero, meaning "a single write may block" 71 | // should be overridden by subclasses with buffering 72 | virtual int availableForWrite() 73 | { 74 | return 0; 75 | } 76 | 77 | size_t print(const __FlashStringHelper *); 78 | size_t print(const String &); 79 | size_t print(const char[]); 80 | size_t print(char); 81 | size_t print(unsigned char, int = DEC); 82 | size_t print(int, int = DEC); 83 | size_t print(unsigned int, int = DEC); 84 | size_t print(long, int = DEC); 85 | size_t print(unsigned long, int = DEC); 86 | size_t print(long long, int = DEC); 87 | size_t print(unsigned long long, int = DEC); 88 | size_t print(double, int = 2); 89 | size_t print(const Printable&); 90 | 91 | size_t println(const __FlashStringHelper *); 92 | size_t println(const String &s); 93 | size_t println(const char[]); 94 | size_t println(char); 95 | size_t println(unsigned char, int = DEC); 96 | size_t println(int, int = DEC); 97 | size_t println(unsigned int, int = DEC); 98 | size_t println(long, int = DEC); 99 | size_t println(unsigned long, int = DEC); 100 | size_t println(long long, int = DEC); 101 | size_t println(unsigned long long, int = DEC); 102 | size_t println(double, int = 2); 103 | size_t println(const Printable&); 104 | size_t println(void); 105 | 106 | size_t printf(const char * format, ...); 107 | 108 | size_t printBuffer(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 109 | size_t printBuffer(char const buffer[], int size, char delim = ' ', int byteline = 0) 110 | { 111 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 112 | } 113 | 114 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim = ' ', int byteline = 0); 115 | size_t printBufferReverse(char const buffer[], int size, char delim = ' ', int byteline = 0) 116 | { 117 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 118 | } 119 | 120 | virtual void flush() { /* Empty implementation for backward compatibility */ } 121 | }; 122 | 123 | 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.3.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.3.1/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /changelog.md: -------------------------------------------------------------------------------- 1 | ## DS323x_Generic Library 2 | 3 | [![arduino-library-badge](https://www.ardu-badge.com/badge/DS323x_Generic.svg?)](https://www.ardu-badge.com/DS323x_Generic) 4 | [![GitHub release](https://img.shields.io/github/release/khoih-prog/DS323x_Generic.svg)](https://github.com/khoih-prog/DS323x_Generic/releases) 5 | [![GitHub](https://img.shields.io/github/license/mashape/apistatus.svg)](https://github.com/khoih-prog/DS323x_Generic/blob/main/LICENSE) 6 | [![contributions welcome](https://img.shields.io/badge/contributions-welcome-brightgreen.svg?style=flat)](#Contributing) 7 | [![GitHub issues](https://img.shields.io/github/issues/khoih-prog/DS323x_Generic.svg)](http://github.com/khoih-prog/DS323x_Generic/issues) 8 | 9 | 10 | Donate to my libraries using BuyMeACoffee 11 | 12 | 13 | --- 14 | --- 15 | 16 | ## Table of Contents 17 | 18 | * [Changelog](#changelog) 19 | * [Releases v1.3.1](#releases-v131) 20 | * [Releases v1.3.0](#releases-v130) 21 | * [Releases v1.2.3](#releases-v123) 22 | * [Releases v1.2.2](#releases-v122) 23 | * [Releases v1.2.1](#releases-v121) 24 | * [Releases v1.2.0](#releases-v120) 25 | * [Releases v1.1.0](#releases-v110) 26 | * [Releases v1.0.0](#releases-v100) 27 | 28 | --- 29 | --- 30 | 31 | ## Changelog 32 | 33 | ### Releases v1.3.1 34 | 35 | 1. Add support to Teensy 4.1 QNEthernet and NativeEthernet 36 | 37 | ### Releases v1.3.0 38 | 39 | 1. Add support to `Portenta_H7 Ethernet and WiFi` 40 | 2. Use [Ethernet_Generic](https://github.com/khoih-prog/Ethernet_Generic) library as default for W5x00 Ethernet 41 | 3. Rewrite all examples for new features with better debug information. 42 | 4. Add examples `tzTest` and `WriteRules` and examples for `Portenta_H7 Ethernet and WiFi` 43 | 5. Update `Packages_Patches` 44 | 45 | ### Releases v1.2.3 46 | 47 | 1. Optimize code by using passing by `reference` instead of by `value` 48 | 2. Add `ESP_Complex` examples to update system time from RTC time. Check [setTime() does not set system time #1](https://github.com/khoih-prog/DS323x_Generic/issues/1) 49 | 3. Update `Packages' Patches` 50 | 51 | ### Releases v1.2.2 52 | 53 | 1. Update `platform.ini` and `library.json` to use original `khoih-prog` instead of `khoih.prog` after PIO fix 54 | 2. Update `Packages' Patches` 55 | 56 | ### Releases v1.2.1 57 | 58 | 1. Using TimeLib instead of Time to avoid case-insensitive issue with Windows and MacOS 59 | 60 | ### Releases v1.2.0 61 | 62 | 1. Add support to RP2040-based boards such as **NANO_RP2040_CONNECT, RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040** using [**Arduino-mbed RP2040** core](https://github.com/arduino/ArduinoCore-mbed) or [**Earle Philhower's arduino-pico core**](https://github.com/earlephilhower/arduino-pico). 63 | 2. Add support to **ESP32-S2/ESP32-C3** 64 | 65 | ### Releases v1.1.0 66 | 67 | 1. Add examples for ESP32/ESP8266 using LittleFS/SPIFFS 68 | 2. Add support to AVR, UNO WiFi Rev2 boards. 69 | 3. Clean-up all compiler warnings possible. 70 | 4. Optimize library and examples to reduce memory usage by using Flash String whenever possible. 71 | 5. Add Table of Contents 72 | 73 | ### Releases v1.0.0 74 | 75 | 1. Initial porting to many Generic boards using WiFi/Ethernet modules/shields. 76 | 2. Add support to **ESP8266, ESP32, SAMD21/SAMD51, nRF52, STM32F/L/H/G/WB/MP1** with **WiFiNINA, ESP8266/ESP32 WiFi, ESP8266-AT, W5x00, ENC28J60, LAN8742A Ethernet** modules/shields. 77 | 3. Fix bug. Add functions. 78 | 4. Completely new examples. 79 | 80 | 81 | -------------------------------------------------------------------------------- /examples/Alarm/ESP/Alarm_ESP/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For ESP8266, ESP32 5 | 6 | DS323x_Generic Arduino library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. 7 | 8 | Based on and modified from Hideaki Tai's DS323x Library (https://github.com/hideakitai/DS323x) 9 | Built by Khoi Hoang https://github.com/khoih-prog/DS323x_Generic 10 | Licensed under MIT license 11 | *****************************************************************************************************************************/ 12 | 13 | #ifndef defines_h 14 | #define defines_h 15 | 16 | #if !(ESP32 || ESP8266) 17 | #error This code is designed to run on ESP32/ESP8266 platform! Please check your Tools->Board setting. 18 | #endif 19 | 20 | #define _TZ_LOGLEVEL_ 2 21 | 22 | #if (ESP8266) 23 | // For ESP8266 24 | #warning Use ESP8266 architecture 25 | #include 26 | #include 27 | #define ETHERNET_USE_ESP8266 28 | #define BOARD_TYPE "ESP8266" 29 | 30 | #define USE_LITTLEFS true 31 | #define USE_SPIFFS false 32 | 33 | #elif (ESP32) 34 | // For ESP32 35 | #warning Use ESP32 architecture 36 | #include 37 | #define ETHERNET_USE_ESP32 38 | #define BOARD_TYPE "ESP32" 39 | 40 | #define W5500_RST_PORT 21 41 | 42 | #define USE_LITTLEFS true 43 | #define USE_SPIFFS false 44 | #endif 45 | 46 | #ifndef BOARD_NAME 47 | #define BOARD_NAME ARDUINO_BOARD 48 | #endif 49 | 50 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 51 | char pass[] = "12345678"; // your network password 52 | 53 | #endif //defines_h 54 | -------------------------------------------------------------------------------- /examples/Alarm/ESP/Alarm_ESP_Complex/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For ESP8266, ESP32 5 | 6 | DS323x_Generic Arduino library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. 7 | 8 | Based on and modified from Hideaki Tai's DS323x Library (https://github.com/hideakitai/DS323x) 9 | Built by Khoi Hoang https://github.com/khoih-prog/DS323x_Generic 10 | Licensed under MIT license 11 | *****************************************************************************************************************************/ 12 | 13 | #ifndef defines_h 14 | #define defines_h 15 | 16 | #if !(ESP32 || ESP8266) 17 | #error This code is designed to run on ESP32/ESP8266 platform! Please check your Tools->Board setting. 18 | #endif 19 | 20 | #define _TZ_LOGLEVEL_ 2 21 | 22 | #if (ESP8266) 23 | // For ESP8266 24 | #warning Use ESP8266 architecture 25 | #include 26 | #include 27 | #define ETHERNET_USE_ESP8266 28 | #define BOARD_TYPE "ESP8266" 29 | 30 | #define USE_LITTLEFS true 31 | #define USE_SPIFFS false 32 | 33 | #elif (ESP32) 34 | // For ESP32 35 | #warning Use ESP32 architecture 36 | #include 37 | #define ETHERNET_USE_ESP32 38 | #define BOARD_TYPE "ESP32" 39 | 40 | #define W5500_RST_PORT 21 41 | 42 | #define USE_LITTLEFS true 43 | #define USE_SPIFFS false 44 | #endif 45 | 46 | #ifndef BOARD_NAME 47 | #define BOARD_NAME ARDUINO_BOARD 48 | #endif 49 | 50 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 51 | char pass[] = "12345678"; // your network password 52 | 53 | #endif //defines_h 54 | -------------------------------------------------------------------------------- /examples/Alarm/Portenta_H7_WiFi/Alarm_WiFi/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For AVR, ESP8266/ESP32, SAMD21/SAMD51, nRF52, STM32, WT32_ETH01 boards 5 | 6 | Based on and modified from Arduino Timezone Library (https://github.com/JChristensen/Timezone) 7 | to support other boards such as ESP8266/ESP32, SAMD21, SAMD51, Adafruit's nRF52 boards, etc. 8 | 9 | Copyright (C) 2018 by Jack Christensen and licensed under GNU GPL v3.0, https://www.gnu.org/licenses/gpl.html 10 | 11 | Built by Khoi Hoang https://github.com/khoih-prog/Timezone_Generic 12 | Licensed under MIT license 13 | *****************************************************************************************************************************/ 14 | 15 | #ifndef defines_h 16 | #define defines_h 17 | 18 | #define DEBUG_WIFI_WEBSERVER_PORT Serial 19 | 20 | // Debug Level from 0 to 4 21 | #define _WIFI_LOGLEVEL_ 3 22 | #define _NTP_LOGLEVEL_ 1 23 | #define _TZ_LOGLEVEL_ 1 24 | 25 | #define USE_WIFI_PORTENTA_H7 true 26 | 27 | #define USE_WIFI_NINA false 28 | 29 | #if ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) ) 30 | 31 | #if defined(BOARD_NAME) 32 | #undef BOARD_NAME 33 | #endif 34 | 35 | #if defined(CORE_CM7) 36 | #warning Using Portenta H7 M7 core 37 | #define BOARD_NAME "PORTENTA_H7_M7" 38 | #else 39 | #warning Using Portenta H7 M4 core 40 | #define BOARD_NAME "PORTENTA_H7_M4" 41 | #endif 42 | 43 | #else 44 | #error For Portenta_H7 only 45 | #endif 46 | 47 | #ifndef BOARD_NAME 48 | #define BOARD_NAME BOARD_TYPE 49 | #endif 50 | 51 | #include 52 | 53 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 54 | char pass[] = "12345678"; // your network password 55 | 56 | #endif //defines_h 57 | -------------------------------------------------------------------------------- /examples/Time/ESP/RTC_ESP/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For ESP8266, ESP32 5 | 6 | DS323x_Generic Arduino library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. 7 | 8 | Based on and modified from Hideaki Tai's DS323x Library (https://github.com/hideakitai/DS323x) 9 | Built by Khoi Hoang https://github.com/khoih-prog/DS323x_Generic 10 | Licensed under MIT license 11 | *****************************************************************************************************************************/ 12 | 13 | #ifndef defines_h 14 | #define defines_h 15 | 16 | #if !(ESP32 || ESP8266) 17 | #error This code is designed to run on ESP32/ESP8266 platform! Please check your Tools->Board setting. 18 | #endif 19 | 20 | #define _TZ_LOGLEVEL_ 2 21 | 22 | #if (ESP8266) 23 | // For ESP8266 24 | #warning Use ESP8266 architecture 25 | #include 26 | #include 27 | #define ETHERNET_USE_ESP8266 28 | #define BOARD_TYPE "ESP8266" 29 | 30 | #define USE_LITTLEFS true 31 | #define USE_SPIFFS false 32 | 33 | #elif (ESP32) 34 | // For ESP32 35 | #warning Use ESP32 architecture 36 | #include 37 | #define ETHERNET_USE_ESP32 38 | #define BOARD_TYPE "ESP32" 39 | 40 | #define W5500_RST_PORT 21 41 | 42 | #define USE_LITTLEFS true 43 | #define USE_SPIFFS false 44 | #endif 45 | 46 | #ifndef BOARD_NAME 47 | #define BOARD_NAME ARDUINO_BOARD 48 | #endif 49 | 50 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 51 | char pass[] = "12345678"; // your network password 52 | 53 | #endif //defines_h 54 | -------------------------------------------------------------------------------- /examples/Time/ESP/RTC_ESP_Complex/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For ESP8266, ESP32 5 | 6 | DS323x_Generic Arduino library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. 7 | 8 | Based on and modified from Hideaki Tai's DS323x Library (https://github.com/hideakitai/DS323x) 9 | Built by Khoi Hoang https://github.com/khoih-prog/DS323x_Generic 10 | Licensed under MIT license 11 | *****************************************************************************************************************************/ 12 | 13 | #ifndef defines_h 14 | #define defines_h 15 | 16 | #if !(ESP32 || ESP8266) 17 | #error This code is designed to run on ESP32/ESP8266 platform! Please check your Tools->Board setting. 18 | #endif 19 | 20 | #define _TZ_LOGLEVEL_ 2 21 | 22 | #if (ESP8266) 23 | // For ESP8266 24 | #warning Use ESP8266 architecture 25 | #include 26 | #include 27 | #define ETHERNET_USE_ESP8266 28 | #define BOARD_TYPE "ESP8266" 29 | 30 | #define USE_LITTLEFS true 31 | #define USE_SPIFFS false 32 | 33 | #elif (ESP32) 34 | // For ESP32 35 | #warning Use ESP32 architecture 36 | #include 37 | #define ETHERNET_USE_ESP32 38 | #define BOARD_TYPE "ESP32" 39 | 40 | #define W5500_RST_PORT 21 41 | 42 | #define USE_LITTLEFS true 43 | #define USE_SPIFFS false 44 | #endif 45 | 46 | #ifndef BOARD_NAME 47 | #define BOARD_NAME ARDUINO_BOARD 48 | #endif 49 | 50 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 51 | char pass[] = "12345678"; // your network password 52 | #endif //defines_h 53 | -------------------------------------------------------------------------------- /examples/Time/Portenta_H7_WiFi/RTC_WiFi/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | 4 | For AVR, ESP8266/ESP32, SAMD21/SAMD51, nRF52, STM32, WT32_ETH01 boards 5 | 6 | Based on and modified from Arduino Timezone Library (https://github.com/JChristensen/Timezone) 7 | to support other boards such as ESP8266/ESP32, SAMD21, SAMD51, Adafruit's nRF52 boards, etc. 8 | 9 | Copyright (C) 2018 by Jack Christensen and licensed under GNU GPL v3.0, https://www.gnu.org/licenses/gpl.html 10 | 11 | Built by Khoi Hoang https://github.com/khoih-prog/Timezone_Generic 12 | Licensed under MIT license 13 | *****************************************************************************************************************************/ 14 | 15 | #ifndef defines_h 16 | #define defines_h 17 | 18 | #define DEBUG_WIFI_WEBSERVER_PORT Serial 19 | 20 | // Debug Level from 0 to 4 21 | #define _WIFI_LOGLEVEL_ 3 22 | #define _NTP_LOGLEVEL_ 1 23 | #define _TZ_LOGLEVEL_ 1 24 | 25 | #define USE_WIFI_PORTENTA_H7 true 26 | 27 | #define USE_WIFI_NINA false 28 | 29 | #if ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) ) 30 | 31 | #if defined(BOARD_NAME) 32 | #undef BOARD_NAME 33 | #endif 34 | 35 | #if defined(CORE_CM7) 36 | #warning Using Portenta H7 M7 core 37 | #define BOARD_NAME "PORTENTA_H7_M7" 38 | #else 39 | #warning Using Portenta H7 M4 core 40 | #define BOARD_NAME "PORTENTA_H7_M4" 41 | #endif 42 | 43 | #else 44 | #error For Portenta_H7 only 45 | #endif 46 | 47 | #ifndef BOARD_NAME 48 | #define BOARD_NAME BOARD_TYPE 49 | #endif 50 | 51 | #include 52 | 53 | char ssid[] = "YOUR_SSID"; // your network SSID (name) 54 | char pass[] = "12345678"; // your network password 55 | 56 | #endif //defines_h 57 | -------------------------------------------------------------------------------- /keywords.txt: -------------------------------------------------------------------------------- 1 | ####################################### 2 | # Syntax Coloring Map For UPnP_Generic 3 | ####################################### 4 | 5 | ####################################### 6 | # Datatypes (KEYWORD1) 7 | ####################################### 8 | 9 | TimeSpan KEYWORD1 10 | DateTime KEYWORD1 11 | timestampOpt KEYWORD1 12 | 13 | DS323x_ KEYWORD1 14 | Reg KEYWORD1 15 | Format KEYWORD1 16 | AMPM KEYWORD1 17 | DYDT KEYWORD1 18 | A1Rate KEYWORD1 19 | A2Rate KEYWORD1 20 | SquareWaveFreq KEYWORD1 21 | InterruptCtrl KEYWORD1 22 | AlarmSel KEYWORD1 23 | DS323x_ KEYWORD1 24 | DS323x_ KEYWORD1 25 | DS323x_ KEYWORD1 26 | 27 | ####################################### 28 | # Methods and Functions (KEYWORD2) 29 | ####################################### 30 | 31 | ################### 32 | # TimeSpan Class 33 | ################### 34 | 35 | days KEYWORD2 36 | hours KEYWORD2 37 | minutes KEYWORD2 38 | seconds KEYWORD2 39 | totalseconds KEYWORD2 40 | 41 | ################### 42 | # DateTime Class 43 | ################### 44 | 45 | get_tmElements_t KEYWORD2 46 | setFrom_tmElements_t KEYWORD2 47 | get_time_t KEYWORD2 48 | setFrom_time_t KEYWORD2 49 | year KEYWORD2 50 | month KEYWORD2 51 | day KEYWORD2 52 | get_time_t KEYWORD2 53 | hour KEYWORD2 54 | minute KEYWORD2 55 | second KEYWORD2 56 | yearOffset KEYWORD2 57 | dayOfTheWeek KEYWORD2 58 | secondstime KEYWORD2 59 | unixtime KEYWORD2 60 | timestamp KEYWORD2 61 | 62 | ################### 63 | # DS323x_ Class 64 | ################### 65 | 66 | attach KEYWORD2 67 | now KEYWORD2 68 | hour KEYWORD2 69 | minute KEYWORD2 70 | second KEYWORD2 71 | weekday KEYWORD2 72 | year KEYWORD2 73 | month KEYWORD2 74 | day KEYWORD2 75 | ampm KEYWORD2 76 | format KEYWORD2 77 | alarm KEYWORD2 78 | dydt KEYWORD2 79 | a1m1 KEYWORD2 80 | a1m2 KEYWORD2 81 | a1m3 KEYWORD2 82 | a1m4 KEYWORD2 83 | rateA1 KEYWORD2 84 | a2m1 KEYWORD2 85 | a2m2 KEYWORD2 86 | a2m3 KEYWORD2 87 | a2m4 KEYWORD2 88 | rateA2 KEYWORD2 89 | rate KEYWORD2 90 | enableOscillator KEYWORD2 91 | enableBatteryBackedSquareWave KEYWORD2 92 | convertTemperature KEYWORD2 93 | squareWaveFrequency KEYWORD2 94 | interruptControl KEYWORD2 95 | enableAlarm1 KEYWORD2 96 | enableAlarm2 KEYWORD2 97 | trigger KEYWORD2 98 | oscillatorStopFlag KEYWORD2 99 | enable32kHz KEYWORD2 100 | busy KEYWORD2 101 | hasAlarmed KEYWORD2 102 | clearAlarm KEYWORD2 103 | agingOffset KEYWORD2 104 | temperature KEYWORD2 105 | 106 | ####################################### 107 | # Constants (LITERAL1) 108 | ####################################### 109 | 110 | DS323X_GENERIC_VERSION LITERAL1 111 | 112 | DS323X_GENERIC_VERSION_MAJOR LITERAL1 113 | DS323X_GENERIC_VERSION_MINOR LITERAL1 114 | DS323X_GENERIC_VERSION_PATCH LITERAL1 115 | DS323X_GENERIC_VERSION_INT LITERAL1 116 | 117 | SECONDS_FROM_1970_TO_2000 LITERAL1 118 | YEARS_FROM_1970_TO_2000 LITERAL1 119 | I2C_ADDR LITERAL1 120 | MASK_HOUR_24H LITERAL1 121 | MASK_HOUR_12H LITERAL1 122 | MASK_MONTH LITERAL1 123 | MASK_ALARM_BIT LITERAL1 124 | MASK_ALARM_DAY LITERAL1 125 | MASK_ALARM_DATE LITERAL1 126 | -------------------------------------------------------------------------------- /library.json: -------------------------------------------------------------------------------- 1 | { 2 | "name": "DS323x_Generic", 3 | "version": "1.3.1", 4 | "description": "Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, Teensy 4.1 QNEthernet/NativeEthernet, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet", 5 | "keywords": "i2c, wire, rtc, ds3231, ds3232, ds323x, accuracy, precise, timing, ntp, wifi, ethernet, WiFiNINA, SAM-DUE, SAMD, nRF52, STM32, wt32-eth01, rp2040, nano-rp2040-connect, rtl8720, FlashStorage, DueFlashStorage, LittleFS, EEPROM, portenta-h7, rpi-pico", 6 | "authors": [ 7 | { 8 | "name": "Hideaki Tai", 9 | "url": "https://github.com/hideakitai" 10 | }, 11 | { 12 | "name": "Khoi Hoang", 13 | "url": "https://github.com/khoih-prog/DS323x_Generic", 14 | "email": "khoih-prog@gmail.com", 15 | "maintainer": true 16 | } 17 | ], 18 | "repository": 19 | { 20 | "type": "git", 21 | "url": "https://github.com/khoih-prog/DS323x_Generic" 22 | }, 23 | "homepage": "https://github.com/khoih-prog/DS323x_Generic", 24 | "export": { 25 | "exclude": [ 26 | "linux", 27 | "extras", 28 | "tests" 29 | ] 30 | }, 31 | "dependencies": [ 32 | { 33 | "owner": "paulstoffregen", 34 | "name": "Time", 35 | "version": ">=1.6.1", 36 | "platforms": ["*"] 37 | }, 38 | { 39 | "owner": "khoih-prog", 40 | "name": "WiFiNINA_Generic", 41 | "version": ">=1.8.14-3", 42 | "platforms": ["*"] 43 | }, 44 | { 45 | "owner": "khoih-prog", 46 | "name": "WiFiWebServer", 47 | "version": ">=1.7.0", 48 | "platforms": ["*"] 49 | }, 50 | { 51 | "owner": "khoih-prog", 52 | "name": "WebServer_WT32_ETH01", 53 | "version": ">=1.4.1", 54 | "platforms": ["*"] 55 | }, 56 | { 57 | "owner": "khoih-prog", 58 | "name": "WiFiWebServer_RTL8720", 59 | "version": ">=1.1.1", 60 | "platforms": ["*"] 61 | }, 62 | { 63 | "owner": "khoih-prog", 64 | "name": "EthernetWebServer", 65 | "version": ">=2.1.1", 66 | "platforms": ["*"] 67 | }, 68 | { 69 | "owner": "khoih-prog", 70 | "name": "EthernetWebServer_STM32", 71 | "version": ">=1.4.0", 72 | "platforms": ["*"] 73 | }, 74 | { 75 | "owner": "khoih-prog", 76 | "name": "ESP8266_AT_WebServer", 77 | "version": ">=1.5.3", 78 | "platforms": ["*"] 79 | }, 80 | { 81 | "owner": "khoih-prog", 82 | "name": "Timezone_Generic", 83 | "version": ">=1.10.0", 84 | "platforms": ["*"] 85 | }, 86 | { 87 | "owner": "khoih-prog", 88 | "name": "Ethernet_Generic", 89 | "version": "^2.0.0" 90 | }, 91 | { 92 | "owner": "jandrassy", 93 | "name": "EthernetENC", 94 | "version": ">=2.0.2", 95 | "platforms": ["*"] 96 | }, 97 | { 98 | "owner": "uipethernet", 99 | "name": "UIPEthernet", 100 | "version": ">=2.0.8", 101 | "platforms": ["*"] 102 | }, 103 | { 104 | "owner": "stm32duino", 105 | "name": "STM32duino LwIP", 106 | "version": ">=2.1.2", 107 | "platforms": "ststm32" 108 | }, 109 | { 110 | "owner": "stm32duino", 111 | "name": "STM32Ethernet", 112 | "version": ">=1.2.0", 113 | "platforms": "ststm32" 114 | }, 115 | { 116 | "owner": "ssilverman", 117 | "name": "QNEthernet", 118 | "version": ">=0.14.0", 119 | "platforms": ["teensy"] 120 | } 121 | ], 122 | "license": "MIT", 123 | "frameworks": "*", 124 | "platforms": "*", 125 | "examples": "examples/*/*/*.ino", 126 | "headers": ["DS323x_Generic.h"] 127 | } 128 | -------------------------------------------------------------------------------- /library.properties: -------------------------------------------------------------------------------- 1 | name=DS323x_Generic 2 | version=1.3.1 3 | author=Hideaki Tai, Khoi Hoang 4 | maintainer=Khoi Hoang 5 | sentence=Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal 6 | paragraph=For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, Teensy 4.1 QNEthernet/NativeEthernet, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet 7 | category=Device Control 8 | url=https://github.com/khoih-prog/DS323x_Generic 9 | architectures=* 10 | repository=https://github.com/khoih-prog/DS323x_Generic 11 | license=MIT 12 | depends=Wire, Time, WiFiNINA_Generic, Ethernet_Generic, EthernetENC, UIPEthernet, STM32duino STM32Ethernet, STM32duino LwIP, Timezone_Generic 13 | includes=DS323x_Generic.h 14 | -------------------------------------------------------------------------------- /utils/astyle_library.conf: -------------------------------------------------------------------------------- 1 | # Code formatting rules for Arduino libraries, modified from for KH libraries: 2 | # 3 | # https://github.com/arduino/Arduino/blob/master/build/shared/examples_formatter.conf 4 | # 5 | 6 | # astyle --style=allman -s2 -t2 -C -S -xW -Y -M120 -f -p -xg -H -xb -c --xC120 -xL *.h *.cpp *.ino 7 | 8 | --mode=c 9 | --lineend=linux 10 | --style=allman 11 | 12 | # -r or -R 13 | #--recursive 14 | 15 | # -c => Converts tabs into spaces 16 | convert-tabs 17 | 18 | # -s2 => 2 spaces indentation 19 | --indent=spaces=2 20 | 21 | # -t2 => tab =2 spaces 22 | #--indent=tab=2 23 | 24 | # -C 25 | --indent-classes 26 | 27 | # -S 28 | --indent-switches 29 | 30 | # -xW 31 | --indent-preproc-block 32 | 33 | # -Y => indent classes, switches (and cases), comments starting at column 1 34 | --indent-col1-comments 35 | 36 | # -M120 => maximum of 120 spaces to indent a continuation line 37 | --max-continuation-indent=120 38 | 39 | # -xC120 => max‑code‑length will break a line if the code exceeds # characters 40 | --max-code-length=120 41 | 42 | # -f => 43 | --break-blocks 44 | 45 | # -p => put a space around operators 46 | --pad-oper 47 | 48 | # -xg => Insert space padding after commas 49 | --pad-comma 50 | 51 | # -H => put a space after if/for/while 52 | pad-header 53 | 54 | # -xb => Break one line headers (e.g. if/for/while) 55 | --break-one-line-headers 56 | 57 | # -c => Converts tabs into spaces 58 | #--convert-tabs 59 | 60 | # if you like one-liners, keep them 61 | #keep-one-line-statements 62 | 63 | # -xV 64 | --attach-closing-while 65 | 66 | #unpad-paren 67 | 68 | # -xp 69 | remove-comment-prefix 70 | 71 | -------------------------------------------------------------------------------- /utils/restyle.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | for dir in . ; do 4 | find $dir -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.ino" \) -exec astyle --suffix=none --options=./utils/astyle_library.conf \{\} \; 5 | done 6 | 7 | --------------------------------------------------------------------------------