├── pics ├── W6100.png ├── serveStatic.png ├── CURIOSITY_drive.png ├── Change_Interval.png ├── Teensy41_pinout.png ├── AdvancedWebServer.png ├── Curiosity_AVR128DA48.png ├── Curiosity_AVR128DB48.png ├── FS_EthernetWebServer.png ├── AdvancedWebServer_AVRDx.png ├── Curiosity_Dx48_pinout.png ├── Curiosity_Dx48_wiring.png ├── AdvancedWebServer_ESP32_SPI2.png ├── AdvancedWebServer_QNEthernet.png ├── AdvancedWebServer_RPi_Pico.png ├── ESP32_FS_EthernetWebServer.png ├── AdvancedWebServer_Portenta_H7.png ├── SimpleWebServer_NativeEthernet.png ├── AdvancedWebServer_Mbed_RPi_Pico.png ├── AdvancedWebServer_NativeEthernet.png ├── AdvancedWebServer_RPi_Pico_SPI1.png ├── AdvancedWebServer_Teensy41_SPI1.png └── AdvancedWebServer_Mbed_RPi_Pico_SPI1.png ├── examples ├── FS_EthernetWebServer │ └── data │ │ ├── edit.htm.gz │ │ ├── favicon.ico │ │ ├── graphs.js.gz │ │ ├── CanadaFlag_1.png │ │ ├── CanadaFlag_2.png │ │ ├── CanadaFlag_3.jpg │ │ └── index.htm ├── ESP32_FS_EthernetWebServer │ └── data │ │ ├── edit.htm.gz │ │ ├── favicon.ico │ │ ├── graphs.js.gz │ │ ├── CanadaFlag_1.png │ │ ├── CanadaFlag_2.png │ │ ├── CanadaFlag_3.jpg │ │ └── index.htm ├── HTTPClient │ └── node_test_server │ │ └── package.json ├── AdvancedWebServer_ESP32_SPI2 │ ├── debug_custom.json │ └── debug.cfg ├── multiFileProject │ ├── multiFileProject.cpp │ ├── multiFileProject.h │ └── multiFileProject.ino ├── serveStatic │ └── data │ │ ├── page1.html │ │ ├── page2.html │ │ └── page3.html ├── serveStaticLoadFile │ └── data │ │ ├── page1.html │ │ ├── page2.html │ │ └── page3.html ├── WebServer_NativeEthernet │ └── defines.h └── QNEthernet │ ├── MQTTClient_Auth │ └── defines.h │ ├── MQTTClient_Basic │ └── defines.h │ ├── MQTT_ThingStream │ └── defines.h │ └── AdvancedWebServer │ └── defines.h ├── utils ├── restyle.sh └── astyle_library.conf ├── .codespellrc ├── .github ├── workflows │ ├── auto-github-actions.yml │ ├── report-size-deltas.yml │ └── spell-check.yml ├── dependabot.yml ├── ISSUE_TEMPLATE │ ├── feature_request.md │ └── bug_report.md └── stale.yml ├── .gitignore ├── Packages_Patches ├── arduino │ └── hardware │ │ └── mbed_portenta │ │ ├── 2.4.1 │ │ └── portenta_post_install.sh │ │ ├── 2.5.2 │ │ └── portenta_post_install.sh │ │ ├── 2.6.1 │ │ └── portenta_post_install.sh │ │ ├── 2.7.2 │ │ └── portenta_post_install.sh │ │ ├── 2.8.0 │ │ └── portenta_post_install.sh │ │ ├── 3.0.0 │ │ └── portenta_post_install.sh │ │ ├── 3.0.1 │ │ └── portenta_post_install.sh │ │ ├── 3.1.1 │ │ └── portenta_post_install.sh │ │ ├── 3.3.0 │ │ └── portenta_post_install.sh │ │ └── 3.4.1 │ │ └── portenta_post_install.sh ├── adafruit │ └── hardware │ │ └── nrf52 │ │ ├── 0.19.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.20.1 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.20.5 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.21.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.22.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.22.1 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.23.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 0.24.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ ├── 1.0.0 │ │ ├── variants │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ └── variant.cpp │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ └── variant.cpp │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ └── variant.cpp │ │ └── cores │ │ │ └── nRF5 │ │ │ └── Print.h │ │ ├── 1.1.0 │ │ ├── variants │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ └── variant.cpp │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ └── variant.cpp │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ └── variant.cpp │ │ └── cores │ │ │ └── nRF5 │ │ │ └── Print.h │ │ ├── 1.2.0 │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ ├── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ └── variant.cpp │ │ │ └── sparkfun_nrf52840_mini │ │ │ └── variant.cpp │ │ └── 1.3.0 │ │ └── variants │ │ ├── NINA_B112_ublox │ │ ├── pins_arduino.h │ │ └── variant.cpp │ │ ├── NINA_B302_ublox │ │ ├── pins_arduino.h │ │ └── variant.cpp │ │ └── sparkfun_nrf52840_mini │ │ └── variant.cpp ├── Seeeduino │ └── hardware │ │ └── rp2040 │ │ ├── 1.9.3 │ │ └── variants │ │ │ └── rpipico │ │ │ └── pins_arduino.h │ │ └── 2.7.2 │ │ └── variants │ │ └── Seeed_XIAO_RP2040 │ │ └── pins_arduino.h └── rp2040 │ └── hardware │ └── rp2040 │ ├── 1.3.1 │ └── cores │ │ └── rp2040 │ │ └── Arduino.h │ └── 1.4.0 │ └── cores │ └── rp2040 │ └── Arduino.h ├── src ├── libb64 │ ├── base64.h │ ├── cdecode.h │ ├── cencode.h │ └── base64.cpp ├── EthernetHttpClient.h ├── Ethernet_HTTPClient │ ├── Ethernet_URLEncoder.h │ └── Ethernet_URLEncoder.cpp ├── detail │ ├── esp_detail │ │ └── mimetable.h │ ├── RequestHandler.h │ └── mimetable.h └── EthernetWebServer.h ├── LICENSE ├── library.properties ├── LibraryPatches ├── esp32 │ └── cores │ │ └── esp32 │ │ └── Server.h └── Ethernet2 │ └── src │ └── Ethernet2.h ├── library.json └── CONTRIBUTING.md /pics/W6100.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/W6100.png -------------------------------------------------------------------------------- /pics/serveStatic.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/serveStatic.png -------------------------------------------------------------------------------- /pics/CURIOSITY_drive.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/CURIOSITY_drive.png -------------------------------------------------------------------------------- /pics/Change_Interval.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Change_Interval.png -------------------------------------------------------------------------------- /pics/Teensy41_pinout.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Teensy41_pinout.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer.png -------------------------------------------------------------------------------- /pics/Curiosity_AVR128DA48.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Curiosity_AVR128DA48.png -------------------------------------------------------------------------------- /pics/Curiosity_AVR128DB48.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Curiosity_AVR128DB48.png -------------------------------------------------------------------------------- /pics/FS_EthernetWebServer.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/FS_EthernetWebServer.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_AVRDx.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_AVRDx.png -------------------------------------------------------------------------------- /pics/Curiosity_Dx48_pinout.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Curiosity_Dx48_pinout.png -------------------------------------------------------------------------------- /pics/Curiosity_Dx48_wiring.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/Curiosity_Dx48_wiring.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_ESP32_SPI2.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_ESP32_SPI2.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_QNEthernet.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_QNEthernet.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_RPi_Pico.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_RPi_Pico.png -------------------------------------------------------------------------------- /pics/ESP32_FS_EthernetWebServer.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/ESP32_FS_EthernetWebServer.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_Portenta_H7.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_Portenta_H7.png -------------------------------------------------------------------------------- /pics/SimpleWebServer_NativeEthernet.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/SimpleWebServer_NativeEthernet.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_Mbed_RPi_Pico.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_Mbed_RPi_Pico.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_NativeEthernet.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_NativeEthernet.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_RPi_Pico_SPI1.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_RPi_Pico_SPI1.png -------------------------------------------------------------------------------- /pics/AdvancedWebServer_Teensy41_SPI1.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_Teensy41_SPI1.png -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/edit.htm.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/edit.htm.gz -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/favicon.ico: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/favicon.ico -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/graphs.js.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/graphs.js.gz -------------------------------------------------------------------------------- /pics/AdvancedWebServer_Mbed_RPi_Pico_SPI1.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/pics/AdvancedWebServer_Mbed_RPi_Pico_SPI1.png -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/edit.htm.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/edit.htm.gz -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/favicon.ico: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/favicon.ico -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/CanadaFlag_1.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/CanadaFlag_1.png -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/CanadaFlag_2.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/CanadaFlag_2.png -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/CanadaFlag_3.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/FS_EthernetWebServer/data/CanadaFlag_3.jpg -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/graphs.js.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/graphs.js.gz -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_1.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_1.png -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_2.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_2.png -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_3.jpg: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/khoih-prog/EthernetWebServer/HEAD/examples/ESP32_FS_EthernetWebServer/data/CanadaFlag_3.jpg -------------------------------------------------------------------------------- /utils/restyle.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | for dir in . ; do 4 | find $dir -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.ino" \) -exec astyle --suffix=none --options=./utils/astyle_library.conf \{\} \; 5 | done 6 | 7 | -------------------------------------------------------------------------------- /examples/HTTPClient/node_test_server/package.json: -------------------------------------------------------------------------------- 1 | { 2 | "name": "node_test_server", 3 | "version": "0.0.1", 4 | "author": { 5 | "name": "Tom Igoe" 6 | }, 7 | "dependencies": { 8 | "body-parser": ">=1.11.0", 9 | "express": ">=4.0.0", 10 | "multer": "*", 11 | "ws": ">=5.2.3" 12 | } 13 | } 14 | -------------------------------------------------------------------------------- /.codespellrc: -------------------------------------------------------------------------------- 1 | # See: https://github.com/codespell-project/codespell#using-a-config-file 2 | [codespell] 3 | # In the event of a false positive, add the problematic word, in all lowercase, to a comma-separated list here: 4 | ignore-words-list = , 5 | check-filenames = 6 | check-hidden = 7 | skip = ./.git,./src,./examples,./Packages_Patches,./LibraryPatches 8 | -------------------------------------------------------------------------------- /.github/workflows/auto-github-actions.yml: -------------------------------------------------------------------------------- 1 | name: auto-github-actions 2 | on: [push] 3 | jobs: 4 | check-bats-version: 5 | runs-on: ubuntu-latest 6 | steps: 7 | - uses: actions/checkout@v3 8 | - uses: actions/setup-node@v3 9 | with: 10 | node-version: '14' 11 | - run: npm install -g bats 12 | - run: bats -v 13 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Prerequisites 2 | *.d 3 | 4 | # Compiled Object files 5 | *.slo 6 | *.lo 7 | *.o 8 | *.obj 9 | 10 | # Precompiled Headers 11 | *.gch 12 | *.pch 13 | 14 | # Compiled Dynamic libraries 15 | *.so 16 | *.dylib 17 | *.dll 18 | 19 | # Fortran module files 20 | *.mod 21 | *.smod 22 | 23 | # Compiled Static libraries 24 | *.lai 25 | *.la 26 | *.a 27 | *.lib 28 | 29 | # Executables 30 | *.exe 31 | *.out 32 | *.app 33 | -------------------------------------------------------------------------------- /.github/workflows/report-size-deltas.yml: -------------------------------------------------------------------------------- 1 | name: Report Size Deltas 2 | 3 | on: 4 | schedule: 5 | - cron: '*/5 * * * *' 6 | 7 | jobs: 8 | report: 9 | runs-on: ubuntu-latest 10 | 11 | steps: 12 | - name: Comment size deltas reports to PRs 13 | uses: arduino/report-size-deltas@v1 14 | with: 15 | # The name of the workflow artifact created by the "Compile Examples" workflow 16 | sketches-reports-source: sketches-reports 17 | -------------------------------------------------------------------------------- /examples/AdvancedWebServer_ESP32_SPI2/debug_custom.json: -------------------------------------------------------------------------------- 1 | { 2 | "name":"Arduino on ESP32", 3 | "toolchainPrefix":"xtensa-esp32-elf", 4 | "svdFile":"esp32.svd", 5 | "request":"attach", 6 | "postAttachCommands":[ 7 | "set remote hardware-watchpoint-limit 2", 8 | "monitor reset halt", 9 | "monitor gdb_sync", 10 | "thb setup", 11 | "c" 12 | ], 13 | "overrideRestartCommands":[ 14 | "monitor reset halt", 15 | "monitor gdb_sync", 16 | "thb setup", 17 | "c" 18 | ] 19 | } -------------------------------------------------------------------------------- /examples/AdvancedWebServer_ESP32_SPI2/debug.cfg: -------------------------------------------------------------------------------- 1 | # SPDX-License-Identifier: GPL-2.0-or-later 2 | # 3 | # Example OpenOCD configuration file for ESP32-WROVER-KIT board. 4 | # 5 | # For example, OpenOCD can be started for ESP32 debugging on 6 | # 7 | # openocd -f board/esp32-wrover-kit-3.3v.cfg 8 | # 9 | 10 | # Source the JTAG interface configuration file 11 | source [find interface/ftdi/esp32_devkitj_v1.cfg] 12 | set ESP32_FLASH_VOLTAGE 3.3 13 | # Source the ESP32 configuration file 14 | source [find target/esp32.cfg] 15 | -------------------------------------------------------------------------------- /.github/dependabot.yml: -------------------------------------------------------------------------------- 1 | # See: https://docs.github.com/en/github/administering-a-repository/configuration-options-for-dependency-updates#about-the-dependabotyml-file 2 | version: 2 3 | 4 | updates: 5 | # Configure check for outdated GitHub Actions actions in workflows. 6 | # See: https://docs.github.com/en/github/administering-a-repository/keeping-your-actions-up-to-date-with-dependabot 7 | - package-ecosystem: github-actions 8 | directory: / # Check the repository's workflows under /.github/workflows/ 9 | schedule: 10 | interval: daily 11 | -------------------------------------------------------------------------------- /.github/workflows/spell-check.yml: -------------------------------------------------------------------------------- 1 | name: Spell Check 2 | 3 | on: 4 | pull_request: 5 | push: 6 | schedule: 7 | # run every Tuesday at 3 AM UTC 8 | - cron: "0 3 * * 2" 9 | workflow_dispatch: 10 | repository_dispatch: 11 | 12 | jobs: 13 | spellcheck: 14 | runs-on: ubuntu-latest 15 | 16 | steps: 17 | - name: Checkout 18 | uses: actions/checkout@v3 19 | 20 | # See: https://github.com/codespell-project/actions-codespell/blob/master/README.md 21 | - name: Spell check 22 | uses: codespell-project/actions-codespell@master 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.3.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.cpp: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.cpp 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | *****************************************************************************************************************************/ 9 | 10 | // To demo how to include files in multi-file Projects 11 | 12 | #include "multiFileProject.h" 13 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/feature_request.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Feature request 3 | about: Suggest an idea for this project 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | ### Is your feature request related to a problem? Please describe. 11 | 12 | A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] 13 | 14 | ### Describe the solution you'd like 15 | 16 | A clear and concise description of what you want to happen. 17 | 18 | ### Describe alternatives you've considered 19 | 20 | A clear and concise description of any alternative solutions or features you've considered. 21 | 22 | ### Additional context 23 | 24 | Add any other context or screenshots about the feature request here. 25 | -------------------------------------------------------------------------------- /src/libb64/base64.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | base64.h - c source to a base64 encoding algorithm implementation 3 | 4 | EthernetWebServer is a library for the Ethernet shields to run WebServer 5 | 6 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 7 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 8 | Licensed under MIT license 9 | 10 | Original author: 11 | @file Esp8266WebServer.h 12 | @author Ivan Grokhotkov 13 | *************************************************************************************************************************************/ 14 | 15 | #pragma once 16 | 17 | #ifndef BASE64_H 18 | #define BASE64_H 19 | 20 | int base64_encode(const unsigned char* aInput, int aInputLen, unsigned char* aOutput, int aOutputLen); 21 | 22 | #endif // BASE64_H 23 | -------------------------------------------------------------------------------- /.github/stale.yml: -------------------------------------------------------------------------------- 1 | # Configuration for probot-stale - https://github.com/probot/stale 2 | 3 | daysUntilStale: 60 4 | daysUntilClose: 14 5 | limitPerRun: 30 6 | staleLabel: stale 7 | exemptLabels: 8 | - pinned 9 | - security 10 | - "to be implemented" 11 | - "for reference" 12 | - "move to PR" 13 | - "enhancement" 14 | 15 | only: issues 16 | onlyLabels: [] 17 | exemptProjects: false 18 | exemptMilestones: false 19 | exemptAssignees: false 20 | 21 | markComment: > 22 | [STALE_SET] This issue has been automatically marked as stale because it has not had 23 | recent activity. It will be closed in 14 days if no further activity occurs. Thank you 24 | for your contributions. 25 | 26 | unmarkComment: > 27 | [STALE_CLR] This issue has been removed from the stale queue. Please ensure activity to keep it opening the future. 28 | 29 | closeComment: > 30 | [STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions. 31 | 32 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | MIT License 2 | 3 | Copyright (c) 2019 Khoi Hoang 4 | 5 | Permission is hereby granted, free of charge, to any person obtaining a copy 6 | of this software and associated documentation files (the "Software"), to deal 7 | in the Software without restriction, including without limitation the rights 8 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 9 | copies of the Software, and to permit persons to whom the Software is 10 | furnished to do so, subject to the following conditions: 11 | 12 | The above copyright notice and this permission notice shall be included in all 13 | copies or substantial portions of the Software. 14 | 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 18 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 20 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 21 | SOFTWARE. 22 | -------------------------------------------------------------------------------- /library.properties: -------------------------------------------------------------------------------- 1 | name=EthernetWebServer 2 | version=2.4.1 3 | author=Khoi Hoang 4 | license=MIT 5 | maintainer=Khoi Hoang 6 | sentence=Simple Ethernet WebServer, HTTP Client and WebSocket Client library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W6100, ENC28J60 or Teensy 4.1 NativeEthernet/QNEthernet 7 | paragraph=The WebServer supports HTTP GET and POST requests, provides argument parsing, handles one client at a time. It now provides HTTP Client and WebSocket Client. It supports Arduino boards (Atmel AVR-s, AVR-Dx, SAM DUE, Atmel SAM3X8E ARM Cortex-M3, SAMD21, SAMD51, ESP8266, ESP32, Adafruit nRF52, Teensy boards, Realtek Ameba(RTL8195A,RTL8710)) using Wiznet W5x00/W6100 or ENC28J60 network shields. It now supports WebServer serving from LittleFS/SPIFFS for ESP8266/ESP32. Ethernet_Generic library is used as default for W5x00 with custom SPI. 8 | category=Communication 9 | url=https://github.com/khoih-prog/EthernetWebServer 10 | architectures=* 11 | depends=Functional-Vlpp, Ethernet_Generic 12 | includes=EthernetWebServer.h, EthernetHttpClient.h 13 | -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | *****************************************************************************************************************************/ 9 | 10 | // To demo how to include files in multi-file Projects 11 | 12 | #pragma once 13 | 14 | #if defined(__AVR_AVR128DA48__) 15 | #define SerialDebug Serial1 16 | #elif defined(__AVR_AVR128DB48__) 17 | #define SerialDebug Serial3 18 | #else 19 | // standard Serial 20 | #define SerialDebug Serial 21 | #endif 22 | 23 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 1 24 | 25 | // Can be included as many times as necessary, without `Multiple Definitions` Linker Error 26 | #include // https://github.com/khoih-prog/EthernetWebServer 27 | 28 | #include // https://github.com/khoih-prog/EthernetWebServer 29 | -------------------------------------------------------------------------------- /examples/serveStatic/data/page1.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page1 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page1.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /examples/serveStatic/data/page2.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page2 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page2.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /examples/serveStatic/data/page3.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page3 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page3.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /examples/serveStaticLoadFile/data/page1.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page1 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page1.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /examples/serveStaticLoadFile/data/page2.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page2 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page2.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /examples/serveStaticLoadFile/data/page3.html: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Hello from Ethernet HTTP Web Server ESP8266/ESP32 - Page3 10 | 11 | 12 | 13 |
14 |

ESP8266/ESP32 Ethernet HTTP Web Server

15 |

Hello from ESP8266/ESP32 Ethernet HTTP Web Server. This is Page3.

16 |

17 | Page1 18 | Page2 19 | Page3 20 |

21 | 22 |

Copyright (C) 2019 Arduino Slovakia.

23 |

Copyright (C) 2021 Sardar Azari.

24 |
25 | 26 | 27 | 28 | -------------------------------------------------------------------------------- /LibraryPatches/esp32/cores/esp32/Server.h: -------------------------------------------------------------------------------- 1 | /* 2 | Server.h - Base class that provides Server 3 | Copyright (c) 2011 Adrian McEwen. All right reserved. 4 | 5 | This library is free software; you can redistribute it and/or 6 | modify it under the terms of the GNU Lesser General Public 7 | License as published by the Free Software Foundation; either 8 | version 2.1 of the License, or (at your option) any later version. 9 | 10 | This library is distributed in the hope that it will be useful, 11 | but WITHOUT ANY WARRANTY; without even the implied warranty of 12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 | Lesser General Public License for more details. 14 | 15 | You should have received a copy of the GNU Lesser General Public 16 | License along with this library; if not, write to the Free Software 17 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 18 | */ 19 | 20 | #ifndef server_h 21 | #define server_h 22 | 23 | #include "Print.h" 24 | 25 | class Server: public Print 26 | { 27 | public: 28 | // KH, change to fix compiler error for EthernetWebServer 29 | // error: cannot declare field 'EthernetWebServer::_server' to be of abstract type 'EthernetServer' 30 | // virtual void begin(uint16_t port=0) =0; 31 | //virtual void begin() = 0; 32 | void begin() {}; 33 | }; 34 | 35 | #endif 36 | -------------------------------------------------------------------------------- /utils/astyle_library.conf: -------------------------------------------------------------------------------- 1 | # Code formatting rules for Arduino libraries, modified from for KH libraries: 2 | # 3 | # https://github.com/arduino/Arduino/blob/master/build/shared/examples_formatter.conf 4 | # 5 | 6 | # astyle --style=allman -s2 -t2 -C -S -xW -Y -M120 -f -p -xg -H -xb -c --xC120 -xL *.h *.cpp *.ino 7 | 8 | --mode=c 9 | --lineend=linux 10 | --style=allman 11 | 12 | # -r or -R 13 | #--recursive 14 | 15 | # -c => Converts tabs into spaces 16 | convert-tabs 17 | 18 | # -s2 => 2 spaces indentation 19 | --indent=spaces=2 20 | 21 | # -t2 => tab =2 spaces 22 | #--indent=tab=2 23 | 24 | # -C 25 | --indent-classes 26 | 27 | # -S 28 | --indent-switches 29 | 30 | # -xW 31 | --indent-preproc-block 32 | 33 | # -Y => indent classes, switches (and cases), comments starting at column 1 34 | --indent-col1-comments 35 | 36 | # -M120 => maximum of 120 spaces to indent a continuation line 37 | --max-continuation-indent=120 38 | 39 | # -xC120 => max‑code‑length will break a line if the code exceeds # characters 40 | --max-code-length=120 41 | 42 | # -f => 43 | --break-blocks 44 | 45 | # -p => put a space around operators 46 | --pad-oper 47 | 48 | # -xg => Insert space padding after commas 49 | --pad-comma 50 | 51 | # -H => put a space after if/for/while 52 | pad-header 53 | 54 | # -xb => Break one line headers (e.g. if/for/while) 55 | --break-one-line-headers 56 | 57 | # -c => Converts tabs into spaces 58 | #--convert-tabs 59 | 60 | # if you like one-liners, keep them 61 | #keep-one-line-statements 62 | 63 | # -xV 64 | --attach-closing-while 65 | 66 | #unpad-paren 67 | 68 | # -xp 69 | remove-comment-prefix 70 | 71 | -------------------------------------------------------------------------------- /src/libb64/cdecode.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | cdecoder.h - c source to a base64 decoding algorithm implementation 3 | 4 | EthernetWebServer is a library for the Ethernet shields to run WebServer 5 | 6 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 7 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 8 | Licensed under MIT license 9 | 10 | Original author: 11 | @file Esp8266WebServer.h 12 | @author Ivan Grokhotkov 13 | *****************************************************************************************************************************/ 14 | 15 | #pragma once 16 | 17 | // Reintroduce to prevent duplication compile error if other lib/core already has LIB64 18 | // pragma once can't prevent that 19 | #ifndef BASE64_CDECODE_H 20 | #define BASE64_CDECODE_H 21 | 22 | #define base64_decode_expected_len(n) ((n * 3) / 4) 23 | 24 | #ifdef __cplusplus 25 | extern "C" { 26 | #endif 27 | 28 | typedef enum 29 | { 30 | step_a, step_b, step_c, step_d 31 | } base64_decodestep; 32 | 33 | typedef struct 34 | { 35 | base64_decodestep step; 36 | char plainchar; 37 | } base64_decodestate; 38 | 39 | void base64_init_decodestate(base64_decodestate* state_in); 40 | 41 | int base64_decode_value(int value_in); 42 | 43 | int base64_decode_block(const char* code_in, const int length_in, char* plaintext_out, base64_decodestate* state_in); 44 | 45 | int base64_decode_chars(const char* code_in, const int length_in, char* plaintext_out); 46 | 47 | #ifdef __cplusplus 48 | } // extern "C" 49 | #endif 50 | 51 | #endif /* BASE64_CDECODE_H */ 52 | 53 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0, 1, 2, 3, 4, 5, 6, 7, 30 | 8, 9, 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.ino: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.ino 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | *****************************************************************************************************************************/ 9 | 10 | // To demo how to include files in multi-file Projects 11 | 12 | #define ETHERNET_WEBSERVER_VERSION_MIN_TARGET "EthernetWebServer v2.2.4" 13 | #define ETHERNET_WEBSERVER_VERSION_MIN 2002004 14 | 15 | #include "multiFileProject.h" 16 | 17 | // To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error 18 | #include // https://github.com/khoih-prog/EthernetWebServer 19 | 20 | void setup() 21 | { 22 | SerialDebug.begin(115200); 23 | 24 | while (!SerialDebug && millis() < 5000); 25 | 26 | delay(500); 27 | 28 | SerialDebug.println("\nStart multiFileProject"); 29 | SerialDebug.println(ETHERNET_WEBSERVER_VERSION); 30 | 31 | #if defined(ETHERNET_WEBSERVER_VERSION_MIN) 32 | 33 | if (ETHERNET_WEBSERVER_VERSION_INT < ETHERNET_WEBSERVER_VERSION_MIN) 34 | { 35 | SerialDebug.print("Warning. Must use this example on Version equal or later than : "); 36 | SerialDebug.println(ETHERNET_WEBSERVER_VERSION_MIN_TARGET); 37 | } 38 | 39 | #endif 40 | 41 | SerialDebug.print("You're OK now"); 42 | } 43 | 44 | void loop() 45 | { 46 | // put your main code here, to run repeatedly: 47 | } 48 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /src/libb64/cencode.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | cencoder.h - c source to a base64 decoding algorithm implementation 3 | 4 | EthernetWebServer is a library for the Ethernet shields to run WebServer 5 | 6 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 7 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 8 | Licensed under MIT license 9 | 10 | Original author: 11 | @file Esp8266WebServer.h 12 | @author Ivan Grokhotkov 13 | *****************************************************************************************************************************/ 14 | 15 | #pragma once 16 | 17 | // Reintroduce to prevent duplication compile error if other lib/core already has LIB64 18 | // pragma once can't prevent that 19 | #ifndef BASE64_CENCODE_H 20 | #define BASE64_CENCODE_H 21 | 22 | #define base64_encode_expected_len(n) ((((4 * n) / 3) + 3) & ~3) 23 | 24 | #ifdef __cplusplus 25 | extern "C" { 26 | #endif 27 | 28 | typedef enum 29 | { 30 | step_A, step_B, step_C 31 | } base64_encodestep; 32 | 33 | typedef struct 34 | { 35 | base64_encodestep step; 36 | char result; 37 | int stepcount; 38 | } base64_encodestate; 39 | 40 | void base64_init_encodestate(base64_encodestate* state_in); 41 | 42 | char base64_encode_value(char value_in); 43 | 44 | int base64_encode_block(const char* plaintext_in, int length_in, char* code_out, base64_encodestate* state_in); 45 | 46 | int base64_encode_blockend(char* code_out, base64_encodestate* state_in); 47 | 48 | int base64_encode_chars(const char* plaintext_in, int length_in, char* code_out); 49 | 50 | #ifdef __cplusplus 51 | } // extern "C" 52 | #endif 53 | 54 | #endif /* BASE64_CENCODE_H */ 55 | 56 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/1.9.3/variants/rpipico/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | 3 | // Pin definitions taken from: 4 | // https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf 5 | 6 | //KH 7 | // Pin count 8 | // ---- 9 | #define PINS_COUNT (30u) 10 | #define NUM_DIGITAL_PINS (30u) 11 | #define NUM_ANALOG_INPUTS (4u) 12 | #define NUM_ANALOG_OUTPUTS (0u) 13 | ////// 14 | 15 | // LEDs 16 | #define PIN_LED (25u) 17 | #define PIN_LED_0 (16u) 18 | #define PIN_LED_1 (17u) 19 | #define PIN_LED_2 (18u) 20 | // Serial 21 | #define PIN_SERIAL1_TX (0u) 22 | #define PIN_SERIAL1_RX (1u) 23 | 24 | #define PIN_SERIAL2_TX (31u) 25 | #define PIN_SERIAL2_RX (31u) 26 | 27 | 28 | // SPI 29 | #define PIN_SPI0_MISO (4u) 30 | #define PIN_SPI0_MOSI (3u) 31 | #define PIN_SPI0_SCK (2u) 32 | #define PIN_SPI0_SS (5u) 33 | 34 | // static const int SS = PIN_SPI0_SS; // SPI Slave SS not used. Set here only for reference. 35 | // static const int MOSI = PIN_SPI0_MOSI; 36 | // static const int MISO = PIN_SPI0_MISO; 37 | // static const int SCK = PIN_SPI0_SCK; 38 | 39 | #define PIN_SPI1_MISO (12u) 40 | #define PIN_SPI1_MOSI (31u) 41 | #define PIN_SPI1_SCK (31u) 42 | #define PIN_SPI1_SS (31u) 43 | // static const int MISO_1 = PIN_SPI1_MISO; 44 | 45 | #define PIN_A0 (26u) 46 | #define PIN_A1 (27u) 47 | #define PIN_A2 (28u) 48 | #define PIN_A3 (29u) 49 | 50 | static const int A0 = PIN_A0; 51 | static const int A1 = PIN_A1; 52 | static const int A2 = PIN_A2; 53 | static const int A3 = PIN_A3; 54 | 55 | // D0 - D10 56 | #define D26 (26u) 57 | #define D1 (27u) 58 | #define D2 (28u) 59 | #define D3 (29u) 60 | #define D4 (6u) 61 | #define D5 (7u) 62 | #define D0 (0u) 63 | #define D7 (1u) 64 | #define D8 (2u) 65 | #define D9 (4u) 66 | #define D10 (3u) 67 | 68 | // static const int 0 = D0; 69 | 70 | // Wire 71 | #define PIN_WIRE0_SDA (6u) 72 | #define PIN_WIRE0_SCL (7u) 73 | 74 | #define PIN_WIRE1_SDA (26u) 75 | #define PIN_WIRE1_SCL (27u) 76 | 77 | // #define SERIAL_HOWMANY (3u) 78 | // #define SPI_HOWMANY (2u) 79 | // #define WIRE_HOWMANY (2u) 80 | 81 | // #include "../generic/common.h" 82 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = 31 | { 32 | // D0 .. D13 33 | 5, // D0 is P0.05 (UART RX) 34 | 6, // D1 is P0.06 (UART TX) 35 | 7, // D2 is P0.07 36 | 31, // D3 is P0.31 37 | 18, // D4 is P0.18 (LED Blue) 38 | 99, // D5 (NC) 39 | 9, // D6 is P0.09 NFC1 40 | 10, // D7 is P0.10 (Button) NFC2 41 | 99, // D8 (NC) 42 | 8, // D9 is P0.08 43 | 11, // D10 is P0.11 CS 44 | 13, // D11 is P0.13 MOSI 45 | 12, // D12 is P0.12 MISO 46 | 14, // D13 is P0.14 SCK 47 | //I2C 48 | 2, // D14 is P0.2 (SDA) 49 | 3, // D15 is P0.3 (SCL) 50 | // D16 .. D21 (aka A0 .. A5) 51 | 3, // D16 is P0.03 (A0) 52 | 2, // D17 is P0.02 (A1) 53 | 4, // D18 is P0.04 (A2) 54 | 30, // D19 is P0.30 (A3) SW2 55 | 29, // D20 is P0.29 (A4) 56 | 28, // D21 is P0.28 (A5) 57 | 9, // P0.09 NFC 58 | 10, // P0.10 NFC 59 | 16, // SW1 (LED Green) 60 | }; -------------------------------------------------------------------------------- /library.json: -------------------------------------------------------------------------------- 1 | { 2 | "name": "EthernetWebServer", 3 | "version": "2.4.1", 4 | "keywords": "WebServer, Ethernet, Ethernet2, Ethernet3, EthernetLarge, EthernetENC, UIPEthernet, NativeEthernet, QNEthernet, Portenta-H7, Teensy, SAMD21, SAMD51, SAM DUE, nRF52, ESP32, ESP8266, rpi-pico, rp2040, W5x00, W5500, W6100, ENC28J60, HTTP-Client, WebSocket-Client, server, client, websocket, LittleFS, SPIFFS, Arduino, Mega, AVR, AVR-Dx", 5 | "description": "Simple Ethernet WebServer, HTTP Client and WebSocket Client library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, ESP, nRF52, ESP32, ESP8266 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W6100, ENC28J60 or Teensy 4.1 NativeEthernet/QNEthernet. The WebServer supports HTTP GET and POST requests, provides argument parsing, handles one client at a time. It now provides HTTP Client and WebSocket Client. It supports Arduino boards (Atmel AVR-s, AVR-Dx, SAM DUE, Atmel SAM3X8E ARM Cortex-M3, SAMD21, SAMD51, ESP8266, ESP32, Adafruit nRF52, Teensy boards, Realtek Ameba(RTL8195A,RTL8710)) using Wiznet W5x00 or ENC28J60 network shields. It now supports WebServer serving from LittleFS/SPIFFS for ESP8266/ESP32. Ethernet_Generic library is used as default for W5x00 with custom SPI", 6 | "authors": 7 | { 8 | "name": "Khoi Hoang", 9 | "url": "https://github.com/khoih-prog", 10 | "maintainer": true 11 | }, 12 | "repository": 13 | { 14 | "type": "git", 15 | "url": "https://github.com/khoih-prog/EthernetWebServer" 16 | }, 17 | "homepage": "https://github.com/khoih-prog/EthernetWebServer", 18 | "export": { 19 | "exclude": [ 20 | "linux", 21 | "extras", 22 | "tests" 23 | ] 24 | }, 25 | "dependencies": 26 | [ 27 | { 28 | "owner": "khoih-prog", 29 | "name": "Functional-Vlpp", 30 | "version": "^1.0.2" 31 | }, 32 | { 33 | "owner": "khoih-prog", 34 | "name": "Ethernet_Generic", 35 | "version": "^2.8.1" 36 | }, 37 | { 38 | "owner": "ssilverman", 39 | "name": "QNEthernet", 40 | "version": ">=0.17.0", 41 | "platforms": ["teensy"] 42 | } 43 | ], 44 | "license": "MIT", 45 | "frameworks": "*", 46 | "platforms": "*", 47 | "examples": "examples/*/*/*.ino", 48 | "headers": ["EthernetWebServer.h", "EthernetHttpClient.h"] 49 | } 50 | -------------------------------------------------------------------------------- /src/EthernetHttpClient.h: -------------------------------------------------------------------------------- 1 | /************************************************************************************************************************************* 2 | EthernetHttpClient.h - Dead simple HTTP WebClient. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | // Library to simplify HTTP fetching on Arduino 32 | // (c) Copyright Arduino. 2016 33 | // Released under Apache License, version 2.0 34 | 35 | #pragma once 36 | 37 | #ifndef ETHERNET_WEBSERVER_HTTP_CLIENT_H 38 | #define ETHERNET_WEBSERVER_HTTP_CLIENT_H 39 | 40 | #include 41 | 42 | #include "detail/Debug.h" 43 | #include "Ethernet_HTTPClient/Ethernet_HttpClient.h" 44 | #include "Ethernet_HTTPClient/Ethernet_WebSocketClient.h" 45 | #include "Ethernet_HTTPClient/Ethernet_URLEncoder.h" 46 | 47 | #endif // ETHERNET_WEBSERVER_HTTP_CLIENT_H 48 | -------------------------------------------------------------------------------- /examples/WebServer_NativeEthernet/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | 18 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) ) 19 | 20 | #define USE_NATIVE_ETHERNET true 21 | #define BOARD_NAME "TEENSY 4.1" 22 | 23 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 24 | #define SHIELD_TYPE "NativeEthernet Library" 25 | 26 | #else 27 | #error For Teensy 4.1 and NativeEthernet only 28 | #endif 29 | 30 | #include "NativeEthernet.h" 31 | #include 32 | 33 | // Enter a MAC address and IP address for your controller below. 34 | #define NUMBER_OF_MAC 20 35 | 36 | byte mac[][NUMBER_OF_MAC] = 37 | { 38 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 39 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 40 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 41 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 42 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 43 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 44 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 45 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 46 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 47 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 48 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 49 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 50 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 51 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 52 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 53 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 54 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 55 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 56 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 57 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 58 | }; 59 | 60 | #endif //defines_h 61 | -------------------------------------------------------------------------------- /src/Ethernet_HTTPClient/Ethernet_URLEncoder.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | Ethernet_URLEncoder.h - Dead simple HTTP WebClient. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | // Library to simplify HTTP fetching on Arduino 32 | // (c) Copyright Arduino. 2019 33 | // Released under Apache License, version 2.0 34 | 35 | #pragma once 36 | 37 | #ifndef ETHERNET_URL_ENCODER_H 38 | #define ETHERNET_URL_ENCODER_H 39 | 40 | #include 41 | 42 | #include "detail/Debug.h" 43 | 44 | 45 | class EthernetURLEncoderClass 46 | { 47 | public: 48 | EthernetURLEncoderClass(); 49 | virtual ~EthernetURLEncoderClass(); 50 | 51 | static String encode(const char* str); 52 | static String encode(const String& str); 53 | 54 | private: 55 | static String encode(const char* str, int length); 56 | }; 57 | 58 | extern EthernetURLEncoderClass EthernetURLEncoder; 59 | 60 | #endif // ETHERNET_URL_ENCODER_H 61 | -------------------------------------------------------------------------------- /CONTRIBUTING.md: -------------------------------------------------------------------------------- 1 | ## Contributing to EthernetWebServer 2 | 3 | ### Reporting Bugs 4 | 5 | Please report bugs in EthernetWebServer if you find them. 6 | 7 | However, before reporting a bug please check through the following: 8 | 9 | * [Existing Open Issues](https://github.com/khoih-prog/EthernetWebServer/issues) - someone might have already encountered this. 10 | 11 | If you don't find anything, please [open a new issue](https://github.com/khoih-prog/EthernetWebServer/issues/new). 12 | 13 | ### How to submit a bug report 14 | 15 | Please ensure to specify the following: 16 | 17 | * Arduino IDE version (e.g. 1.8.19) or Platform.io version 18 | * Board Core Version (e.g. Arduino SAMDUE core v1.6.12, ESP32 core v2.0.6, ESP8266 core v3.1.0, ArduinoCore-mbed v3.4.1, etc.) 19 | * Contextual information (e.g. what you were trying to achieve) 20 | * Simplest possible steps to reproduce 21 | * Anything that might be relevant in your opinion, such as: 22 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 23 | * Network configuration 24 | 25 | Please be educated, civilized and constructive. Disrespective posts against [GitHub Code of Conduct](https://docs.github.com/en/site-policy/github-terms/github-event-code-of-conduct) will be ignored and deleted. 26 | 27 | ### Example 28 | 29 | ``` 30 | Arduino IDE version: 1.8.19 31 | RASPBERRY_PI_PICO board 32 | ArduinoCore-mbed v3.4.1 33 | OS: Ubuntu 20.04 LTS 34 | Linux xy-Inspiron-3593 5.15.0-57-generic #63~20.04.1-Ubuntu SMP Wed Nov 30 13:40:16 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux 35 | 36 | Context: 37 | I encountered a crash while trying to use the library 38 | 39 | Steps to reproduce: 40 | 1. ... 41 | 2. ... 42 | 3. ... 43 | 4. ... 44 | ``` 45 | 46 | ### Additional context 47 | 48 | Add any other context about the problem here. 49 | 50 | --- 51 | 52 | ### Sending Feature Requests 53 | 54 | Feel free to post feature requests. It's helpful if you can explain exactly why the feature would be useful. 55 | 56 | There are usually some outstanding feature requests in the [existing issues list](https://github.com/khoih-prog/EthernetWebServer/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement), feel free to add comments to them. 57 | 58 | --- 59 | 60 | ### Sending Pull Requests 61 | 62 | Pull Requests with changes and fixes are also welcome! 63 | 64 | Please use the `astyle` to reformat the updated library code as follows (demo for Ubuntu Linux) 65 | 66 | 1. Change directory to the library GitHub 67 | 68 | ``` 69 | xy@xy-Inspiron-3593:~$ cd Arduino/xy/EthernetWebServer_GitHub/ 70 | xy@xy-Inspiron-3593:~/Arduino/xy/EthernetWebServer_GitHub$ 71 | ``` 72 | 73 | 2. Issue astyle command 74 | 75 | ``` 76 | xy@xy-Inspiron-3593:~/Arduino/xy/EthernetWebServer_GitHub$ bash utils/restyle.sh 77 | ``` 78 | 79 | 80 | 81 | -------------------------------------------------------------------------------- /src/detail/esp_detail/mimetable.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | mimetable.h - Dead simple web-server. 3 | For Ethernet shields on ESP8266 and ESP32 4 | For EthernetWebServer library by Khoi Hoang 5 | 6 | EthernetWebServer is a library for the Ethernet shields to run WebServer 7 | 8 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 9 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 10 | Licensed under MIT license 11 | 12 | Original author: 13 | @file Esp8266WebServer.h 14 | @author Ivan Grokhotkov 15 | 16 | Version: 2.4.1 17 | 18 | Version Modified By Date Comments 19 | ------- ----------- ---------- ----------- 20 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 21 | ... 22 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 23 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 24 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 25 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 26 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 27 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 28 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 29 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 30 | *************************************************************************************************************************************/ 31 | 32 | #pragma once 33 | 34 | #ifndef __ESP_MIMETABLE_H__ 35 | #define __ESP_MIMETABLE_H__ 36 | 37 | #if (defined(ESP32) || defined(ESP8266)) 38 | 39 | #include "WString.h" 40 | 41 | namespace mime_esp 42 | { 43 | enum type 44 | { 45 | html, 46 | htm, 47 | txt, 48 | #ifndef MIMETYPE_MINIMAL // allow to compile with only the strict minimum of mime-types 49 | css, 50 | js, 51 | json, 52 | png, 53 | gif, 54 | jpg, 55 | jpeg, 56 | ico, 57 | svg, 58 | ttf, 59 | otf, 60 | woff, 61 | woff2, 62 | eot, 63 | sfnt, 64 | xml, 65 | pdf, 66 | zip, 67 | appcache, 68 | #endif // MIMETYPE_MINIMAL 69 | gz, 70 | none, 71 | maxType 72 | }; 73 | 74 | struct Entry 75 | { 76 | const char * endsWith; 77 | const char * mimeType; 78 | }; 79 | 80 | extern const Entry mimeTable[maxType]; 81 | 82 | String getContentType(const String& path); 83 | } 84 | 85 | #endif // #if (defined(ESP32) || defined(ESP8266)) 86 | #endif // #ifndef __ESP_MIMETABLE_H__ 87 | -------------------------------------------------------------------------------- /src/libb64/base64.cpp: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | base64.cpp - cpp source to a base64 encoding algorithm implementation 3 | 4 | EthernetWebServer is a library for the Ethernet shields to run WebServer 5 | 6 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 7 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 8 | Licensed under MIT license 9 | 10 | Original author: 11 | @file Esp8266WebServer.h 12 | @author Ivan Grokhotkov 13 | *************************************************************************************************************************************/ 14 | 15 | #include "base64.h" 16 | 17 | /* Simple test program 18 | #include 19 | void main() 20 | { 21 | char* in = "amcewen"; 22 | char out[22]; 23 | 24 | b64_encode(in, 15, out, 22); 25 | out[21] = '\0'; 26 | 27 | printf(out); 28 | } 29 | */ 30 | 31 | int base64_encode(const unsigned char* aInput, int aInputLen, unsigned char* aOutput, int aOutputLen) 32 | { 33 | // Work out if we've got enough space to encode the input 34 | // Every 6 bits of input becomes a byte of output 35 | if (aOutputLen < (aInputLen * 8) / 6) 36 | { 37 | // FIXME Should we return an error here, or just the length 38 | return (aInputLen * 8) / 6; 39 | } 40 | 41 | // If we get here we've got enough space to do the encoding 42 | 43 | const char* b64_dictionary = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; 44 | 45 | if (aInputLen == 3) 46 | { 47 | aOutput[0] = b64_dictionary[aInput[0] >> 2]; 48 | aOutput[1] = b64_dictionary[(aInput[0] & 0x3) << 4 | (aInput[1] >> 4)]; 49 | aOutput[2] = b64_dictionary[(aInput[1] & 0x0F) << 2 | (aInput[2] >> 6)]; 50 | aOutput[3] = b64_dictionary[aInput[2] & 0x3F]; 51 | } 52 | else if (aInputLen == 2) 53 | { 54 | aOutput[0] = b64_dictionary[aInput[0] >> 2]; 55 | aOutput[1] = b64_dictionary[(aInput[0] & 0x3) << 4 | (aInput[1] >> 4)]; 56 | aOutput[2] = b64_dictionary[(aInput[1] & 0x0F) << 2]; 57 | aOutput[3] = '='; 58 | } 59 | else if (aInputLen == 1) 60 | { 61 | aOutput[0] = b64_dictionary[aInput[0] >> 2]; 62 | aOutput[1] = b64_dictionary[(aInput[0] & 0x3) << 4]; 63 | aOutput[2] = '='; 64 | aOutput[3] = '='; 65 | } 66 | else 67 | { 68 | // Break the input into 3-byte chunks and process each of them 69 | int i; 70 | 71 | for (i = 0; i < aInputLen / 3; i++) 72 | { 73 | base64_encode(&aInput[i * 3], 3, &aOutput[i * 4], 4); 74 | } 75 | 76 | if (aInputLen % 3 > 0) 77 | { 78 | // It doesn't fit neatly into a 3-byte chunk, so process what's left 79 | base64_encode(&aInput[i * 3], aInputLen % 3, &aOutput[i * 4], aOutputLen - (i * 4)); 80 | } 81 | } 82 | 83 | return ((aInputLen + 2) / 3) * 4; 84 | } 85 | 86 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.19.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.1/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.20.5/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /LibraryPatches/Ethernet2/src/Ethernet2.h: -------------------------------------------------------------------------------- 1 | /* 2 | modified 12 Aug 2013 3 | by Soohwan Kim (suhwan@wiznet.co.kr) 4 | 5 | - 10 Apr. 2015 6 | Added support for Arduino Ethernet Shield 2 7 | by Arduino.org team 8 | 9 | */ 10 | #ifndef ethernet_h 11 | #define ethernet_h 12 | 13 | #include 14 | #include "utility/w5500.h" 15 | #include "IPAddress.h" 16 | #include "EthernetClient.h" 17 | #include "EthernetServer.h" 18 | #include "Dhcp.h" 19 | 20 | 21 | 22 | class EthernetClass { 23 | private: 24 | IPAddress _dnsServerAddress; 25 | char* _dnsDomainName; 26 | char* _hostName; 27 | DhcpClass* _dhcp; 28 | 29 | // KH add to work with new func void MACAddress(uint8_t *mac_address); and SinricPro v2.5.1+ 30 | uint8_t _mac_address[6] ={0,}; 31 | ////// 32 | 33 | public: 34 | uint8_t w5500_cspin; 35 | 36 | static uint8_t _state[MAX_SOCK_NUM]; 37 | static uint16_t _server_port[MAX_SOCK_NUM]; 38 | 39 | EthernetClass() { _dhcp = NULL; w5500_cspin = 10; } 40 | void init(uint8_t _cspin = 10) { w5500_cspin = _cspin; } 41 | 42 | #if defined(WIZ550io_WITH_MACADDRESS) 43 | // Initialize function when use the ioShield serise (included WIZ550io) 44 | // WIZ550io has a MAC address which is written after reset. 45 | // Default IP, Gateway and subnet address are also writen. 46 | // so, It needs some initial time. please refer WIZ550io Datasheet in details. 47 | int begin(void); 48 | void begin(IPAddress local_ip); 49 | void begin(IPAddress local_ip, IPAddress dns_server); 50 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 51 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 52 | #else 53 | // Initialize the Ethernet shield to use the provided MAC address and gain the rest of the 54 | // configuration through DHCP. 55 | // Returns 0 if the DHCP configuration failed, and 1 if it succeeded 56 | int begin(uint8_t *mac_address); 57 | void begin(uint8_t *mac_address, IPAddress local_ip); 58 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server); 59 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 60 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 61 | 62 | #endif 63 | 64 | int maintain(); 65 | 66 | // KH add to report link status 67 | uint8_t link(); // returns the linkstate, 1 = linked, 0 = no link 68 | const char* linkReport(); // returns the linkstate as a string 69 | ////// 70 | 71 | // KH add to have similar function to Ethernet lib 72 | // Certainly we can use void macAddress(uint8_t mac[]) to read from W5x00. 73 | void MACAddress(uint8_t *mac_address) 74 | { 75 | memcpy(mac_address, _mac_address, sizeof(_mac_address)); 76 | } 77 | ////// 78 | 79 | IPAddress localIP(); 80 | IPAddress subnetMask(); 81 | IPAddress gatewayIP(); 82 | IPAddress dnsServerIP(); 83 | char* dnsDomainName(); 84 | char* hostName(); 85 | 86 | friend class EthernetClient; 87 | friend class EthernetServer; 88 | }; 89 | 90 | extern EthernetClass Ethernet; 91 | 92 | #endif 93 | -------------------------------------------------------------------------------- /src/detail/RequestHandler.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | RequestHandler.h - Dead simple web-server. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | #pragma once 32 | 33 | #ifndef REQUEST_HANDLER_H 34 | #define REQUEST_HANDLER_H 35 | 36 | #ifndef ETW_UNUSED 37 | #define ETW_UNUSED(x) (void)(x) 38 | #endif 39 | 40 | class ethernetRequestHandler 41 | { 42 | public: 43 | 44 | virtual ~ethernetRequestHandler() { } 45 | 46 | virtual bool canHandle(const HTTPMethod& method, const String& uri) 47 | { 48 | ETW_UNUSED(method); 49 | ETW_UNUSED(uri); 50 | 51 | return false; 52 | } 53 | 54 | virtual bool canUpload(const String& uri) 55 | { 56 | ETW_UNUSED(uri); 57 | 58 | return false; 59 | } 60 | 61 | virtual bool handle(EthernetWebServer& server, const HTTPMethod& requestMethod, const String& requestUri) 62 | { 63 | ETW_UNUSED(server); 64 | ETW_UNUSED(requestMethod); 65 | ETW_UNUSED(requestUri); 66 | 67 | return false; 68 | } 69 | 70 | virtual void upload(EthernetWebServer& server, const String& requestUri, const ethernetHTTPUpload& upload) 71 | { 72 | ETW_UNUSED(server); 73 | ETW_UNUSED(requestUri); 74 | ETW_UNUSED(upload); 75 | } 76 | 77 | ethernetRequestHandler* next() 78 | { 79 | return _next; 80 | } 81 | 82 | void next(ethernetRequestHandler* r) 83 | { 84 | _next = r; 85 | } 86 | 87 | private: 88 | 89 | ethernetRequestHandler* _next = nullptr; 90 | }; 91 | 92 | #endif // REQUEST_HANDLER_H 93 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/bug_report.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Bug report 3 | about: Create a report to help us improve 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | ### Describe the bug 11 | 12 | A clear and concise description of what the bug is. 13 | 14 | ### Steps to Reproduce 15 | 16 | Steps to reproduce the behavior. Including the [MRE](https://stackoverflow.com/help/minimal-reproducible-example) sketches 17 | 18 | ### Expected behavior 19 | 20 | A clear and concise description of what you expected to happen. 21 | 22 | ### Actual behavior 23 | 24 | A clear and concise description of what you expected to happen. 25 | 26 | ### Debug and AT-command log (if applicable) 27 | 28 | A clear and concise description of what you expected to happen. 29 | 30 | ### Screenshots 31 | 32 | If applicable, add screenshots to help explain your problem. 33 | 34 | ### Information 35 | 36 | Please ensure to specify the following: 37 | 38 | * Arduino IDE version (e.g. 1.8.19) or Platform.io version 39 | * Board Core Version (e.g. Arduino SAMDUE core v1.6.12, ESP32 core v2.0.6, ESP8266 core v3.1.0, ArduinoCore-mbed v3.4.1, etc.) 40 | * Contextual information (e.g. what you were trying to achieve) 41 | * Simplest possible steps to reproduce 42 | * Anything that might be relevant in your opinion, such as: 43 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 44 | * Network configuration 45 | 46 | Please be educated, civilized and constructive. Disrespective posts against [GitHub Code of Conduct](https://docs.github.com/en/site-policy/github-terms/github-event-code-of-conduct) will be ignored and deleted. 47 | 48 | ### Example 49 | 50 | ``` 51 | Arduino IDE version: 1.8.19 52 | RASPBERRY_PI_PICO board 53 | ArduinoCore-mbed v3.4.1 54 | OS: Ubuntu 20.04 LTS 55 | Linux xy-Inspiron-3593 5.15.0-57-generic #63~20.04.1-Ubuntu SMP Wed Nov 30 13:40:16 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux 56 | 57 | Context: 58 | I encountered a crash while trying to use the library 59 | 60 | Steps to reproduce: 61 | 1. ... 62 | 2. ... 63 | 3. ... 64 | 4. ... 65 | ``` 66 | 67 | ### Additional context 68 | 69 | Add any other context about the problem here. 70 | 71 | --- 72 | 73 | ### Sending Feature Requests 74 | 75 | Feel free to post feature requests. It's helpful if you can explain exactly why the feature would be useful. 76 | 77 | There are usually some outstanding feature requests in the [existing issues list](https://github.com/khoih-prog/EthernetWebServer/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement), feel free to add comments to them. 78 | 79 | --- 80 | 81 | ### Sending Pull Requests 82 | 83 | Pull Requests with changes and fixes are also welcome! 84 | 85 | Please use the `astyle` to reformat the updated library code as follows (demo for Ubuntu Linux) 86 | 87 | 1. Change directory to the library GitHub 88 | 89 | ``` 90 | xy@xy-Inspiron-3593:~$ cd Arduino/xy/EthernetWebServer_GitHub/ 91 | xy@xy-Inspiron-3593:~/Arduino/xy/EthernetWebServer_GitHub$ 92 | ``` 93 | 94 | 2. Issue astyle command 95 | 96 | ``` 97 | xy@xy-Inspiron-3593:~/Arduino/xy/EthernetWebServer_GitHub$ bash utils/restyle.sh 98 | ``` 99 | 100 | 101 | -------------------------------------------------------------------------------- /src/EthernetWebServer.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | EthernetWebServer.h - Dead simple web-server. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | #pragma once 32 | 33 | #ifndef ETHERNET_WEBSERVER_H 34 | #define ETHERNET_WEBSERVER_H 35 | 36 | ///////////////////////////////////////////////////////////////////////// 37 | 38 | #define ETHERNET_WEBSERVER_VERSION "EthernetWebServer v2.4.1" 39 | 40 | #define ETHERNET_WEBSERVER_VERSION_MAJOR 2 41 | #define ETHERNET_WEBSERVER_VERSION_MINOR 4 42 | #define ETHERNET_WEBSERVER_VERSION_PATCH 1 43 | 44 | #define ETHERNET_WEBSERVER_VERSION_INT 2004001 45 | 46 | ///////////////////////////////////////////////////////////////////////// 47 | 48 | #if USE_UIP_ETHERNET 49 | #if (_ETHERNET_WEBSERVER_LOGLEVEL_ > 3) 50 | #warning Using UIPEthernet library from EthernetWebServer 51 | #endif 52 | #elif USE_CUSTOM_ETHERNET 53 | #if (_ETHERNET_WEBSERVER_LOGLEVEL_ > 3) 54 | #warning Using Custom Ethernet library from EthernetWebServer. You must include a library or error 55 | #endif 56 | #elif !( ETHERNET_USE_PORTENTA_H7 || USE_ETHERNET_ESP8266 || USE_ETHERNET_ENC || \ 57 | USE_NATIVE_ETHERNET || USE_QN_ETHERNET) 58 | #include 59 | 60 | #if (_ETHERNET_WEBSERVER_LOGLEVEL_ > 3) 61 | #warning Using Ethernet_Generic library from EthernetWebServer 62 | #endif 63 | #endif 64 | 65 | ///////////////////////////////////////////////////////////////////////// 66 | 67 | #include "EthernetWebServer.hpp" 68 | #include "EthernetWebServer-impl.h" 69 | #include "Parsing-impl.h" 70 | 71 | #endif // ETHERNET_WEBSERVER_H 72 | -------------------------------------------------------------------------------- /src/Ethernet_HTTPClient/Ethernet_URLEncoder.cpp: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | Ethernet_URLEncoder.cpp - Dead simple HTTP WebClient. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | // Library to simplify HTTP fetching on Arduino 32 | // (c) Copyright Arduino. 2019 33 | // Released under Apache License, version 2.0 34 | 35 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 0 36 | 37 | #include "detail/Debug.h" 38 | #include "Ethernet_HTTPClient/Ethernet_URLEncoder.h" 39 | 40 | EthernetURLEncoderClass::EthernetURLEncoderClass() 41 | { 42 | } 43 | 44 | EthernetURLEncoderClass::~EthernetURLEncoderClass() 45 | { 46 | } 47 | 48 | String EthernetURLEncoderClass::encode(const char* str) 49 | { 50 | return encode(str, strlen(str)); 51 | } 52 | 53 | String EthernetURLEncoderClass::encode(const String& str) 54 | { 55 | return encode(str.c_str(), str.length()); 56 | } 57 | 58 | String EthernetURLEncoderClass::encode(const char* str, int length) 59 | { 60 | String encoded; 61 | 62 | encoded.reserve(length); 63 | 64 | for (int i = 0; i < length; i++) 65 | { 66 | char c = str[i]; 67 | 68 | const char HEX_DIGIT_MAPPER[] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'}; 69 | 70 | if (isAlphaNumeric(c) || (c == '-') || (c == '.') || (c == '_') || (c == '~')) 71 | { 72 | encoded += c; 73 | } 74 | else 75 | { 76 | char s[4]; 77 | 78 | s[0] = '%'; 79 | s[1] = HEX_DIGIT_MAPPER[(c >> 4) & 0xf]; 80 | s[2] = HEX_DIGIT_MAPPER[(c & 0x0f)]; 81 | s[3] = 0; 82 | 83 | encoded += s; 84 | } 85 | } 86 | 87 | return encoded; 88 | } 89 | 90 | EthernetURLEncoderClass EthernetURLEncoder; 91 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | #include 3 | #include 4 | 5 | #ifndef __PINS_ARDUINO__ 6 | #define __PINS_ARDUINO__ 7 | 8 | #ifdef __cplusplus 9 | extern "C" unsigned int PINCOUNT_fn(); 10 | #endif 11 | 12 | // Pin count 13 | // ---- 14 | #define PINS_COUNT (PINCOUNT_fn()) 15 | #define NUM_DIGITAL_PINS (30u) 16 | #define NUM_ANALOG_INPUTS (4u) 17 | #define NUM_ANALOG_OUTPUTS (0u) 18 | 19 | extern PinName digitalPinToPinName(pin_size_t P); 20 | 21 | // LEDs 22 | // ---- 23 | #define PIN_LED (25u) 24 | #define LED_BUILTIN PIN_LED 25 | 26 | // Digital pins 27 | // ---- 28 | #define PIN_D0 (26u) 29 | #define PIN_D1 (27u) 30 | #define PIN_D2 (28u) 31 | #define PIN_D3 (29u) 32 | #define PIN_D4 (6u) 33 | #define PIN_D5 (7u) 34 | #define PIN_D6 (0u) 35 | #define PIN_D7 (1u) 36 | #define PIN_D8 (2u) 37 | #define PIN_D9 (4u) 38 | #define PIN_D10 (3u) 39 | 40 | static const uint8_t D0 = PIN_D0; 41 | static const uint8_t D1 = PIN_D1; 42 | static const uint8_t D2 = PIN_D2; 43 | static const uint8_t D3 = PIN_D3; 44 | static const uint8_t D4 = PIN_D4; 45 | static const uint8_t D5 = PIN_D5; 46 | static const uint8_t D6 = PIN_D6; 47 | static const uint8_t D7 = PIN_D7; 48 | static const uint8_t D8 = PIN_D8; 49 | static const uint8_t D9 = PIN_D9; 50 | static const uint8_t D10 = PIN_D10; 51 | 52 | 53 | // Analog pins 54 | // ----------- 55 | #define PIN_A0 (26u) 56 | #define PIN_A1 (27u) 57 | #define PIN_A2 (28u) 58 | #define PIN_A3 (29u) 59 | 60 | static const uint8_t A0 = PIN_A0; 61 | static const uint8_t A1 = PIN_A1; 62 | static const uint8_t A2 = PIN_A2; 63 | static const uint8_t A3 = PIN_A3; 64 | 65 | #define ADC_RESOLUTION 12 66 | 67 | // Serial 68 | #define PIN_SERIAL_TX (0ul) 69 | #define PIN_SERIAL_RX (1ul) 70 | 71 | // SPI 72 | //#define PIN_SPI_MISO (16u) 73 | //#define PIN_SPI_MOSI (19u) 74 | //#define PIN_SPI_SCK (18u) 75 | //#define PIN_SPI_SS (17u) 76 | // KH fix wrong pin 77 | #define PIN_SPI_MISO (D9) 78 | #define PIN_SPI_MOSI (D10) 79 | #define PIN_SPI_SCK (D8) 80 | #define PIN_SPI_SS (D7) 81 | ////// 82 | 83 | static const uint8_t SS = PIN_SPI_SS; // SPI Slave SS not used. Set here only for reference. 84 | static const uint8_t MOSI = PIN_SPI_MOSI; 85 | static const uint8_t MISO = PIN_SPI_MISO; 86 | static const uint8_t SCK = PIN_SPI_SCK; 87 | 88 | // Wire 89 | #define SDA (6u) 90 | #define SCL (7u) 91 | 92 | #define SERIAL_HOWMANY 1 93 | #define SERIAL1_TX (digitalPinToPinName(PIN_SERIAL_TX)) 94 | #define SERIAL1_RX (digitalPinToPinName(PIN_SERIAL_RX)) 95 | 96 | #define SERIAL_CDC 1 97 | #define HAS_UNIQUE_ISERIAL_DESCRIPTOR 98 | #define BOARD_VENDORID 0x2886 99 | #define BOARD_PRODUCTID 0x8042 100 | #define BOARD_NAME "RaspberryPi Pico" 101 | 102 | uint8_t getUniqueSerialNumber(uint8_t* name); 103 | void _ontouch1200bps_(); 104 | 105 | #define SPI_HOWMANY (1) 106 | #define SPI_MISO (digitalPinToPinName(PIN_SPI_MISO)) 107 | #define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI)) 108 | #define SPI_SCK (digitalPinToPinName(PIN_SPI_SCK)) 109 | 110 | #define WIRE_HOWMANY (1) 111 | #define I2C_SDA (digitalPinToPinName(SDA)) 112 | #define I2C_SCL (digitalPinToPinName(SCL)) 113 | 114 | #define digitalPinToPort(P) (digitalPinToPinName(P)/32) 115 | 116 | #define SERIAL_PORT_USBVIRTUAL SerialUSB 117 | #define SERIAL_PORT_MONITOR SerialUSB 118 | #define SERIAL_PORT_HARDWARE Serial1 119 | #define SERIAL_PORT_HARDWARE_OPEN Serial1 120 | 121 | #define USB_MAX_POWER (500) 122 | 123 | #endif //__PINS_ARDUINO__ 124 | -------------------------------------------------------------------------------- /src/detail/mimetable.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | mimetable.h - Dead simple web-server. 3 | For Ethernet shields 4 | 5 | EthernetWebServer is a library for the Ethernet shields to run WebServer 6 | 7 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 8 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 9 | Licensed under MIT license 10 | 11 | Original author: 12 | @file Esp8266WebServer.h 13 | @author Ivan Grokhotkov 14 | 15 | Version: 2.4.1 16 | 17 | Version Modified By Date Comments 18 | ------- ----------- ---------- ----------- 19 | 1.0.0 K Hoang 13/02/2020 Initial coding for Arduino Mega, Teensy, etc to support Ethernetx libraries 20 | ... 21 | 2.2.0 K Hoang 05/05/2022 Add support to custom SPI for Teensy, Mbed RP2040, Portenta_H7, etc. 22 | 2.2.1 K Hoang 25/08/2022 Auto-select SPI SS/CS pin according to board package 23 | 2.2.2 K Hoang 06/09/2022 Slow SPI clock for old W5100 shield or SAMD Zero. Improve support for SAMD21 24 | 2.2.3 K Hoang 17/09/2022 Add support to AVR Dx (AVR128Dx, AVR64Dx, AVR32Dx, etc.) using DxCore 25 | 2.2.4 K Hoang 26/10/2022 Add support to Seeed XIAO_NRF52840 and XIAO_NRF52840_SENSE using `mbed` or `nRF52` core 26 | 2.3.0 K Hoang 15/11/2022 Add new features, such as CORS. Update code and examples to send big data 27 | 2.4.0 K Hoang 22/12/2022 Fix compile errors for new ESP32 core v2.0.6 28 | 2.4.1 K Hoang 06/01/2023 Add support to `WIZNet W6100` using IPv4 29 | *************************************************************************************************************************************/ 30 | 31 | #pragma once 32 | 33 | #ifndef __MIMETABLE_H__ 34 | #define __MIMETABLE_H__ 35 | 36 | namespace mime 37 | { 38 | 39 | enum type 40 | { 41 | html, 42 | htm, 43 | css, 44 | txt, 45 | js, 46 | json, 47 | png, 48 | gif, 49 | jpg, 50 | ico, 51 | svg, 52 | ttf, 53 | otf, 54 | woff, 55 | woff2, 56 | eot, 57 | sfnt, 58 | xml, 59 | pdf, 60 | zip, 61 | gz, 62 | appcache, 63 | none, 64 | maxType 65 | }; 66 | 67 | struct Entry 68 | { 69 | const char endsWith[16]; 70 | const char mimeType[32]; 71 | }; 72 | 73 | // Table of extension->MIME strings stored in PROGMEM, needs to be global due to GCC section typing rules 74 | const Entry mimeTable[maxType] = 75 | { 76 | { ".html", "text/html" }, 77 | { ".htm", "text/html" }, 78 | { ".css", "text/css" }, 79 | { ".txt", "text/plain" }, 80 | { ".js", "application/javascript" }, 81 | { ".json", "application/json" }, 82 | { ".png", "image/png" }, 83 | { ".gif", "image/gif" }, 84 | { ".jpg", "image/jpeg" }, 85 | { ".ico", "image/x-icon" }, 86 | { ".svg", "image/svg+xml" }, 87 | { ".ttf", "application/x-font-ttf" }, 88 | { ".otf", "application/x-font-opentype" }, 89 | { ".woff", "application/font-woff" }, 90 | { ".woff2", "application/font-woff2" }, 91 | { ".eot", "application/vnd.ms-fontobject" }, 92 | { ".sfnt", "application/font-sfnt" }, 93 | { ".xml", "text/xml" }, 94 | { ".pdf", "application/pdf" }, 95 | { ".zip", "application/zip" }, 96 | { ".gz", "application/x-gzip" }, 97 | { ".appcache", "text/cache-manifest" }, 98 | { "", "application/octet-stream" } 99 | }; 100 | //extern const Entry mimeTable[maxType]; 101 | } // namespace mime 102 | 103 | #endif // #ifndef __MIMETABLE_H__ 104 | 105 | -------------------------------------------------------------------------------- /examples/QNEthernet/MQTTClient_Auth/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | 18 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 19 | // For Teensy 4.1 20 | #define BOARD_TYPE "TEENSY 4.1" 21 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 22 | #define USE_NATIVE_ETHERNET false 23 | #define USE_QN_ETHERNET true 24 | #else 25 | #error Only Teensy 4.1 supported 26 | #endif 27 | 28 | #ifndef BOARD_NAME 29 | #define BOARD_NAME BOARD_TYPE 30 | #endif 31 | 32 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 33 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 34 | 35 | #define USE_UIP_ETHERNET false 36 | #define USE_ETHERNET_GENERIC false 37 | #define USE_ETHERNET_ESP8266 false 38 | #define USE_ETHERNET_ENC false 39 | #define USE_CUSTOM_ETHERNET false 40 | 41 | #if USE_NATIVE_ETHERNET 42 | #include "NativeEthernet.h" 43 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 44 | #define SHIELD_TYPE "using NativeEthernet" 45 | #elif USE_QN_ETHERNET 46 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 47 | using namespace qindesign::network; 48 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 49 | #define SHIELD_TYPE "using QNEthernet" 50 | #endif 51 | 52 | #include 53 | 54 | #if USE_NATIVE_ETHERNET 55 | // Enter a MAC address and IP address for your controller below. 56 | #define NUMBER_OF_MAC 20 57 | 58 | byte mac[][NUMBER_OF_MAC] = 59 | { 60 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 61 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 62 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 63 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 64 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 65 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 66 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 80 | }; 81 | 82 | #else 83 | 84 | #define USING_DHCP true 85 | 86 | #if !USING_DHCP 87 | // Set the static IP address to use if the DHCP fails to assign 88 | IPAddress myIP(192, 168, 2, 222); 89 | IPAddress myNetmask(255, 255, 255, 0); 90 | IPAddress myGW(192, 168, 2, 1); 91 | //IPAddress mydnsServer(192, 168, 2, 1); 92 | IPAddress mydnsServer(8, 8, 8, 8); 93 | #endif 94 | 95 | #endif 96 | 97 | #endif //defines_h 98 | -------------------------------------------------------------------------------- /examples/QNEthernet/MQTTClient_Basic/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | 18 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 19 | // For Teensy 4.1 20 | #define BOARD_TYPE "TEENSY 4.1" 21 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 22 | #define USE_NATIVE_ETHERNET false 23 | #define USE_QN_ETHERNET true 24 | #else 25 | #error Only Teensy 4.1 supported 26 | #endif 27 | 28 | #ifndef BOARD_NAME 29 | #define BOARD_NAME BOARD_TYPE 30 | #endif 31 | 32 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 33 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 34 | 35 | #define USE_UIP_ETHERNET false 36 | #define USE_ETHERNET_GENERIC false 37 | #define USE_ETHERNET_ESP8266 false 38 | #define USE_ETHERNET_ENC false 39 | #define USE_CUSTOM_ETHERNET false 40 | 41 | #if USE_NATIVE_ETHERNET 42 | #include "NativeEthernet.h" 43 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 44 | #define SHIELD_TYPE "using NativeEthernet" 45 | #elif USE_QN_ETHERNET 46 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 47 | using namespace qindesign::network; 48 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 49 | #define SHIELD_TYPE "using QNEthernet" 50 | #endif 51 | 52 | #include 53 | 54 | #if USE_NATIVE_ETHERNET 55 | // Enter a MAC address and IP address for your controller below. 56 | #define NUMBER_OF_MAC 20 57 | 58 | byte mac[][NUMBER_OF_MAC] = 59 | { 60 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 61 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 62 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 63 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 64 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 65 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 66 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 80 | }; 81 | 82 | #else 83 | 84 | #define USING_DHCP true 85 | 86 | #if !USING_DHCP 87 | // Set the static IP address to use if the DHCP fails to assign 88 | IPAddress myIP(192, 168, 2, 222); 89 | IPAddress myNetmask(255, 255, 255, 0); 90 | IPAddress myGW(192, 168, 2, 1); 91 | //IPAddress mydnsServer(192, 168, 2, 1); 92 | IPAddress mydnsServer(8, 8, 8, 8); 93 | #endif 94 | 95 | #endif 96 | 97 | #endif //defines_h 98 | -------------------------------------------------------------------------------- /examples/QNEthernet/MQTT_ThingStream/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | 18 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 19 | // For Teensy 4.1 20 | #define BOARD_TYPE "TEENSY 4.1" 21 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 22 | #define USE_NATIVE_ETHERNET false 23 | #define USE_QN_ETHERNET true 24 | #else 25 | #error Only Teensy 4.1 supported 26 | #endif 27 | 28 | #ifndef BOARD_NAME 29 | #define BOARD_NAME BOARD_TYPE 30 | #endif 31 | 32 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 33 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 34 | 35 | #define USE_UIP_ETHERNET false 36 | #define USE_ETHERNET_GENERIC false 37 | #define USE_ETHERNET_ESP8266 false 38 | #define USE_ETHERNET_ENC false 39 | #define USE_CUSTOM_ETHERNET false 40 | 41 | #if USE_NATIVE_ETHERNET 42 | #include "NativeEthernet.h" 43 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 44 | #define SHIELD_TYPE "using NativeEthernet" 45 | #elif USE_QN_ETHERNET 46 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 47 | using namespace qindesign::network; 48 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 49 | #define SHIELD_TYPE "using QNEthernet" 50 | #endif 51 | 52 | #include 53 | 54 | #if USE_NATIVE_ETHERNET 55 | // Enter a MAC address and IP address for your controller below. 56 | #define NUMBER_OF_MAC 20 57 | 58 | byte mac[][NUMBER_OF_MAC] = 59 | { 60 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 61 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 62 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 63 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 64 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 65 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 66 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 80 | }; 81 | 82 | #else 83 | 84 | #define USING_DHCP false //true 85 | 86 | #if !USING_DHCP 87 | // Set the static IP address to use if the DHCP fails to assign 88 | IPAddress myIP(192, 168, 2, 222); 89 | IPAddress myNetmask(255, 255, 255, 0); 90 | IPAddress myGW(192, 168, 2, 1); 91 | //IPAddress mydnsServer(192, 168, 2, 1); 92 | IPAddress mydnsServer(8, 8, 8, 8); 93 | #endif 94 | 95 | #endif 96 | 97 | #endif //defines_h 98 | -------------------------------------------------------------------------------- /examples/QNEthernet/AdvancedWebServer/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | 18 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 19 | // For Teensy 4.1 20 | #define BOARD_TYPE "TEENSY 4.1" 21 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 22 | #define USE_NATIVE_ETHERNET false 23 | #define USE_QN_ETHERNET true 24 | #else 25 | #error Only Teensy 4.1 supported 26 | #endif 27 | 28 | #ifndef BOARD_NAME 29 | #define BOARD_NAME BOARD_TYPE 30 | #endif 31 | 32 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 33 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 34 | 35 | #define USE_UIP_ETHERNET false 36 | #define USE_ETHERNET_GENERIC false 37 | #define USE_ETHERNET_ESP8266 false 38 | #define USE_ETHERNET_ENC false 39 | #define USE_CUSTOM_ETHERNET false 40 | 41 | #if USE_NATIVE_ETHERNET 42 | #include "NativeEthernet.h" 43 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 44 | #define SHIELD_TYPE "using NativeEthernet" 45 | #elif USE_QN_ETHERNET 46 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 47 | using namespace qindesign::network; 48 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 49 | #define SHIELD_TYPE "using QNEthernet" 50 | #endif 51 | 52 | #include 53 | 54 | #if USE_NATIVE_ETHERNET 55 | // Enter a MAC address and IP address for your controller below. 56 | #define NUMBER_OF_MAC 20 57 | 58 | byte mac[][NUMBER_OF_MAC] = 59 | { 60 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 61 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 62 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 63 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 64 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 65 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 66 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 80 | }; 81 | 82 | #else 83 | 84 | #define USING_DHCP false //true 85 | 86 | #if !USING_DHCP 87 | // Set the static IP address to use if the DHCP fails to assign 88 | IPAddress myIP(192, 168, 2, 222); 89 | IPAddress myNetmask(255, 255, 255, 0); 90 | IPAddress myGW(192, 168, 2, 1); 91 | //IPAddress mydnsServer(192, 168, 2, 1); 92 | IPAddress mydnsServer(8, 8, 8, 8); 93 | #endif 94 | 95 | #endif 96 | 97 | #endif //defines_h 98 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.3.1/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /examples/FS_EthernetWebServer/data/index.htm: -------------------------------------------------------------------------------- 1 | 18 | 19 | 20 | 21 | 22 | ESP Monitor 23 | 24 | 85 | 86 | 87 |
88 | 89 | 90 | 91 | 92 |
93 |
94 |
95 |
96 | 97 | -------------------------------------------------------------------------------- /examples/ESP32_FS_EthernetWebServer/data/index.htm: -------------------------------------------------------------------------------- 1 | 18 | 19 | 20 | 21 | 22 | ESP Monitor 23 | 24 | 85 | 86 | 87 |
88 | 89 | 90 | 91 | 92 |
93 |
94 |
95 |
96 | 97 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | --------------------------------------------------------------------------------