├── .codespellrc ├── .github ├── ISSUE_TEMPLATE │ ├── bug_report.md │ └── feature_request.md ├── dependabot.yml ├── stale.yml └── workflows │ ├── auto-github-actions.yml │ ├── report-size-deltas.yml │ └── spell-check.yml ├── .gitignore ├── CONTRIBUTING.md ├── LICENSE ├── LibraryPatches ├── Ethernet │ └── src │ │ ├── Ethernet.cpp │ │ ├── Ethernet.h │ │ ├── EthernetServer.cpp │ │ └── utility │ │ ├── w5100.cpp │ │ └── w5100.h ├── Ethernet2 │ └── src │ │ ├── Ethernet2.cpp │ │ ├── Ethernet2.h │ │ ├── EthernetUdp2.cpp │ │ └── EthernetUdp2.h ├── Ethernet3 │ └── src │ │ ├── Ethernet3.cpp │ │ └── Ethernet3.h ├── EthernetLarge │ └── src │ │ ├── EthernetLarge.cpp │ │ ├── EthernetLarge.h │ │ ├── EthernetServer.cpp │ │ └── utility │ │ ├── w5100.cpp │ │ └── w5100.h ├── UIPEthernet-2.0.9 │ ├── UIPEthernet.cpp │ ├── UIPEthernet.h │ └── utility │ │ ├── Enc28J60Network.cpp │ │ └── Enc28J60Network.h ├── UIPEthernet │ ├── UIPEthernet.cpp │ ├── UIPEthernet.h │ └── utility │ │ ├── Enc28J60Network.cpp │ │ └── Enc28J60Network.h └── esp32 │ └── cores │ └── esp32 │ └── Server.h ├── Packages_Patches ├── Fab_SAM_Arduino │ └── hardware │ │ └── samd │ │ ├── 1.6.18-alpha2 │ │ └── boards.txt │ │ ├── 1.7.0 │ │ └── boards.txt │ │ ├── 1.8.0 │ │ └── boards.txt │ │ └── 1.9.0 │ │ └── boards.txt ├── Maixduino │ └── hardware │ │ └── k210 │ │ ├── 0.3.10 │ │ └── cores │ │ │ └── arduino │ │ │ └── Stream.h │ │ └── 0.3.11 │ │ └── cores │ │ └── arduino │ │ └── Stream.h ├── STM32 │ └── hardware │ │ └── stm32 │ │ ├── 1.9.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── NUCLEO_F767ZI │ │ │ └── variant.h │ │ │ └── NUCLEO_L053R8 │ │ │ └── variant.h │ │ ├── 2.0.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ ├── L052R(6-8)H_L053R(6-8)H │ │ │ └── variant_generic.h │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ ├── 2.1.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ ├── 2.2.0 │ │ ├── system │ │ │ ├── STM32F4xx │ │ │ │ └── stm32f4xx_hal_conf_default.h │ │ │ └── STM32F7xx │ │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ │ ├── STM32F7xx │ │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ │ └── variant_NUCLEO_F767ZI.h │ │ │ └── STM32L0xx │ │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ │ └── variant_generic.h │ │ └── 2.3.0 │ │ ├── system │ │ ├── STM32F4xx │ │ │ └── stm32f4xx_hal_conf_default.h │ │ └── STM32F7xx │ │ │ └── stm32f7xx_hal_conf_default.h │ │ └── variants │ │ ├── STM32F7xx │ │ └── F765Z(G-I)T_F767Z(G-I)T_F777ZIT │ │ │ └── variant_NUCLEO_F767ZI.h │ │ └── STM32L0xx │ │ └── L052R(6-8)T_L053R(6-8)T_L063R8T │ │ └── variant_generic.h ├── Seeeduino │ └── hardware │ │ ├── nrf52 │ │ └── 1.0.0 │ │ │ ├── cores │ │ │ └── nRF5 │ │ │ │ ├── Print.cpp │ │ │ │ ├── Print.h │ │ │ │ └── Udp.h │ │ │ └── platform.txt │ │ ├── rp2040 │ │ ├── 1.9.3 │ │ │ └── variants │ │ │ │ └── rpipico │ │ │ │ └── pins_arduino.h │ │ └── 2.7.2 │ │ │ ├── boards.txt │ │ │ └── variants │ │ │ └── Seeed_XIAO_RP2040 │ │ │ └── pins_arduino.h │ │ └── samd │ │ ├── 1.7.0 │ │ └── boards.txt │ │ ├── 1.7.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.9 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.8.1 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.8.2 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Arduino.h │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ └── 1.8.3 │ │ ├── cores │ │ └── arduino │ │ │ ├── Arduino.h │ │ │ ├── Print.cpp │ │ │ └── Print.h │ │ └── platform.txt ├── SparkFun │ └── hardware │ │ └── samd │ │ └── 1.8.3 │ │ └── cores │ │ ├── arduino │ │ ├── Print.cpp │ │ └── Print.h │ │ └── arduino51 │ │ ├── Print.cpp │ │ └── Print.h ├── adafruit │ └── hardware │ │ ├── nrf52 │ │ ├── 0.22.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.22.1 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.23.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 0.24.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.0.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.1.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ ├── 1.2.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ │ └── nRF5 │ │ │ │ │ ├── Print.cpp │ │ │ │ │ ├── Print.h │ │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ │ ├── NINA_B112_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ ├── NINA_B302_ublox │ │ │ │ ├── pins_arduino.h │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ │ │ └── sparkfun_nrf52840_mini │ │ │ │ ├── variant.cpp │ │ │ │ └── variant.h │ │ └── 1.3.0 │ │ │ ├── boards.txt │ │ │ ├── cores │ │ │ └── nRF5 │ │ │ │ ├── Print.cpp │ │ │ │ ├── Print.h │ │ │ │ └── Udp.h │ │ │ ├── platform.txt │ │ │ └── variants │ │ │ ├── NINA_B112_ublox │ │ │ ├── pins_arduino.h │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ │ ├── NINA_B302_ublox │ │ │ ├── pins_arduino.h │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ │ └── sparkfun_nrf52840_mini │ │ │ ├── variant.cpp │ │ │ └── variant.h │ │ └── samd │ │ ├── 1.5.14 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.0 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.3 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.4 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.5 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.6.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.0 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.1 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.10 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.11 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.2 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.3 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.4 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.5 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ ├── 1.7.8 │ │ ├── cores │ │ │ └── arduino │ │ │ │ ├── Print.cpp │ │ │ │ └── Print.h │ │ └── platform.txt │ │ └── 1.7.9 │ │ ├── cores │ │ └── arduino │ │ │ ├── Print.cpp │ │ │ └── Print.h │ │ └── platform.txt ├── arduino │ └── hardware │ │ ├── mbed_portenta │ │ ├── 2.4.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.5.2 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.6.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ ├── libraries │ │ │ │ └── SocketWrapper │ │ │ │ │ └── src │ │ │ │ │ ├── MbedUdp.cpp │ │ │ │ │ └── MbedUdp.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.7.2 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 2.8.0 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.0.0 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.0.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.1.1 │ │ │ ├── cores │ │ │ │ └── arduino │ │ │ │ │ └── mbed │ │ │ │ │ └── connectivity │ │ │ │ │ └── lwipstack │ │ │ │ │ └── include │ │ │ │ │ └── lwipstack │ │ │ │ │ └── lwipopts.h │ │ │ └── portenta_post_install.sh │ │ ├── 3.3.0 │ │ │ └── portenta_post_install.sh │ │ └── 3.4.1 │ │ │ └── portenta_post_install.sh │ │ ├── sam │ │ └── 1.6.12 │ │ │ └── platform.txt │ │ └── samd │ │ ├── 1.8.10 │ │ └── platform.txt │ │ ├── 1.8.11 │ │ └── platform.txt │ │ ├── 1.8.12 │ │ └── platform.txt │ │ ├── 1.8.13 │ │ └── platform.txt │ │ ├── 1.8.6 │ │ ├── cores │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ ├── 1.8.7 │ │ ├── cores │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ ├── 1.8.8 │ │ ├── cores │ │ │ ├── Arduino.h │ │ │ └── arduino │ │ │ │ └── Arduino.h │ │ └── platform.txt │ │ └── 1.8.9 │ │ ├── cores │ │ └── arduino │ │ │ └── Arduino.h │ │ └── platform.txt ├── hardware │ └── teensy │ │ └── avr │ │ ├── boards.txt │ │ └── cores │ │ ├── teensy │ │ ├── Stream.cpp │ │ └── Stream.h │ │ ├── teensy3 │ │ ├── Stream.cpp │ │ └── Stream.h │ │ └── teensy4 │ │ ├── Stream.cpp │ │ └── Stream.h ├── industrialshields │ └── hardware │ │ └── avr │ │ ├── 1.1.36 │ │ └── cores │ │ │ └── industrialshields │ │ │ └── Udp.h │ │ └── 1.1.37 │ │ └── cores │ │ └── industrialshields │ │ └── Udp.h ├── realtek │ └── hardware │ │ └── AmebaD │ │ ├── 3.0.10 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.0.8 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.0 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.1 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.2 │ │ └── cores │ │ │ └── arduino │ │ │ └── avr │ │ │ └── pgmspace.h │ │ ├── 3.1.3 │ │ └── cores │ │ │ └── ambd │ │ │ └── avr │ │ │ └── pgmspace.h │ │ └── 3.1.4 │ │ └── cores │ │ └── ambd │ │ └── avr │ │ └── pgmspace.h └── rp2040 │ └── hardware │ └── rp2040 │ ├── 1.2.1 │ └── platform.txt │ ├── 1.2.2 │ └── platform.txt │ ├── 1.3.1 │ ├── cores │ │ └── rp2040 │ │ │ └── Arduino.h │ └── platform.txt │ └── 1.4.0 │ ├── cores │ └── rp2040 │ │ └── Arduino.h │ └── platform.txt ├── README.md ├── changelog.md ├── examples ├── Ethernet │ ├── FTPClient_DownloadFile │ │ ├── FTPClient_DownloadFile.ino │ │ └── defines.h │ ├── FTPClient_ListFiles │ │ ├── FTPClient_ListFiles.ino │ │ └── defines.h │ ├── FTPClient_UploadImage │ │ ├── FTPClient_UploadImage.ino │ │ ├── defines.h │ │ └── octocat.h │ ├── RP2040 │ │ └── FTPClient_DownloadFile_RP2040_SPI1 │ │ │ ├── FTPClient_DownloadFile_RP2040_SPI1.ino │ │ │ └── defines.h │ └── STM32_LAN8742A │ │ ├── FTPClient_DownloadFile_STM32_LAN8742A │ │ ├── FTPClient_DownloadFile_STM32_LAN8742A.ino │ │ └── defines.h │ │ └── FTPClient_ListFiles_STM32_LAN8742A │ │ ├── FTPClient_ListFiles_STM32_LAN8742A.ino │ │ └── defines.h ├── QNEthernet │ ├── FTPClient_DownloadFile │ │ ├── FTPClient_DownloadFile.ino │ │ └── defines.h │ ├── FTPClient_ListFiles │ │ ├── FTPClient_ListFiles.ino │ │ └── defines.h │ └── FTPClient_UploadImage │ │ ├── FTPClient_UploadImage.ino │ │ ├── defines.h │ │ └── octocat.h ├── WiFi │ ├── FTPClient_DownloadFile │ │ ├── FTPClient_DownloadFile.ino │ │ ├── debug.cfg │ │ ├── debug_custom.json │ │ ├── defines.h │ │ ├── esp32.svd │ │ └── esp32s2.svd │ ├── FTPClient_ListFiles │ │ ├── FTPClient_ListFiles.ino │ │ ├── debug.cfg │ │ ├── debug_custom.json │ │ ├── defines.h │ │ └── esp32.svd │ └── FTPClient_UploadImage │ │ ├── FTPClient_UploadImage.ino │ │ ├── debug.cfg │ │ ├── debug_custom.json │ │ ├── defines.h │ │ ├── esp32.svd │ │ └── octocat.h └── multiFileProject │ ├── multiFileProject.cpp │ ├── multiFileProject.h │ └── multiFileProject.ino ├── keywords.txt ├── library.json ├── library.properties ├── platformio └── platformio.ini ├── src ├── FTPClient_Generic.h ├── FTPClient_Generic.hpp ├── FTPClient_Generic_Debug.h └── FTPClient_Generic_Impl.h └── utils ├── astyle_library.conf └── restyle.sh /.codespellrc: -------------------------------------------------------------------------------- 1 | # See: https://github.com/codespell-project/codespell#using-a-config-file 2 | [codespell] 3 | # In the event of a false positive, add the problematic word, in all lowercase, to a comma-separated list here: 4 | ignore-words-list = , 5 | check-filenames = 6 | check-hidden = 7 | skip = ./.git,./src,./examples,./Packages_Patches,./LibraryPatches 8 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/bug_report.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Bug report 3 | about: Create a report to help us improve 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | ### Describe the bug 11 | 12 | A clear and concise description of what the bug is. 13 | 14 | ### Steps to Reproduce 15 | 16 | Steps to reproduce the behavior. Including the [MRE](https://stackoverflow.com/help/minimal-reproducible-example) sketches 17 | 18 | ### Expected behavior 19 | 20 | A clear and concise description of what you expected to happen. 21 | 22 | ### Actual behavior 23 | 24 | A clear and concise description of what you expected to happen. 25 | 26 | ### Debug and AT-command log (if applicable) 27 | 28 | A clear and concise description of what you expected to happen. 29 | 30 | ### Screenshots 31 | 32 | If applicable, add screenshots to help explain your problem. 33 | 34 | --- 35 | 36 | ### Information 37 | 38 | Please ensure to specify the following: 39 | 40 | * Arduino IDE version (e.g. 1.8.19) or Platform.io version 41 | * Board Core Version (e.g. Arduino SAMDUE core v1.6.12, ESP32 core v2.0.6, ESP8266 core v3.1.1, ArduinoCore-mbed v3.5.4, etc.) 42 | * Contextual information (e.g. what you were trying to achieve) 43 | * Simplest possible steps to reproduce 44 | * Anything that might be relevant in your opinion, such as: 45 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 46 | * Network configuration 47 | 48 | Please be educated, civilized and constructive as you've always been. Disrespective posts against [GitHub Code of Conduct](https://docs.github.com/en/site-policy/github-terms/github-event-code-of-conduct) will be ignored and deleted. 49 | 50 | --- 51 | 52 | ### Example 53 | 54 | ``` 55 | Arduino IDE version: 1.8.19 56 | RASPBERRY_PI_PICO board 57 | ArduinoCore-mbed v3.5.4 58 | OS: Ubuntu 20.04 LTS 59 | Linux xy-Inspiron-3593 5.15.0-58-generic #64~20.04.1-Ubuntu SMP Fri Jan 6 16:42:31 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux 60 | 61 | Context: 62 | I encountered a crash while trying to use the Timer Interrupt. 63 | 64 | Steps to reproduce: 65 | 1. ... 66 | 2. ... 67 | 3. ... 68 | 4. ... 69 | ``` 70 | 71 | 72 | --- 73 | 74 | ### Sending Feature Requests 75 | 76 | Feel free to post feature requests. It's helpful if you can explain exactly why the feature would be useful. 77 | 78 | There are usually some outstanding feature requests in the [existing issues list](https://github.com/khoih-prog/FTPClient_Generic/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement), feel free to add comments to them. 79 | 80 | --- 81 | 82 | ### Sending Pull Requests 83 | 84 | Pull Requests with changes and fixes are also welcome! 85 | 86 | Please use the `astyle` to reformat the updated library code as follows (demo for Ubuntu Linux) 87 | 88 | 1. Change directory to the library GitHub 89 | 90 | ``` 91 | xy@xy-Inspiron-3593:~$ cd Arduino/xy/FTPClient_Generic_GitHub/ 92 | xy@xy-Inspiron-3593:~/Arduino/xy/FTPClient_Generic_GitHub$ 93 | ``` 94 | 95 | 2. Issue astyle command 96 | 97 | ``` 98 | xy@xy-Inspiron-3593:~/Arduino/xy/FTPClient_Generic_GitHub$ bash utils/restyle.sh 99 | ``` 100 | 101 | -------------------------------------------------------------------------------- /.github/ISSUE_TEMPLATE/feature_request.md: -------------------------------------------------------------------------------- 1 | --- 2 | name: Feature request 3 | about: Suggest an idea for this project 4 | title: '' 5 | labels: '' 6 | assignees: '' 7 | 8 | --- 9 | 10 | ### Is your feature request related to a problem? Please describe. 11 | 12 | A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] 13 | 14 | ### Describe the solution you'd like 15 | 16 | A clear and concise description of what you want to happen. 17 | 18 | ### Describe alternatives you've considered 19 | 20 | A clear and concise description of any alternative solutions or features you've considered. 21 | 22 | ### Additional context 23 | 24 | Add any other context or screenshots about the feature request here. 25 | -------------------------------------------------------------------------------- /.github/dependabot.yml: -------------------------------------------------------------------------------- 1 | # See: https://docs.github.com/en/github/administering-a-repository/configuration-options-for-dependency-updates#about-the-dependabotyml-file 2 | version: 2 3 | 4 | updates: 5 | # Configure check for outdated GitHub Actions actions in workflows. 6 | # See: https://docs.github.com/en/github/administering-a-repository/keeping-your-actions-up-to-date-with-dependabot 7 | - package-ecosystem: github-actions 8 | directory: / # Check the repository's workflows under /.github/workflows/ 9 | schedule: 10 | interval: daily 11 | -------------------------------------------------------------------------------- /.github/stale.yml: -------------------------------------------------------------------------------- 1 | # Configuration for probot-stale - https://github.com/probot/stale 2 | 3 | daysUntilStale: 60 4 | daysUntilClose: 14 5 | limitPerRun: 30 6 | staleLabel: stale 7 | exemptLabels: 8 | - pinned 9 | - security 10 | - "to be implemented" 11 | - "for reference" 12 | - "move to PR" 13 | - "enhancement" 14 | 15 | only: issues 16 | onlyLabels: [] 17 | exemptProjects: false 18 | exemptMilestones: false 19 | exemptAssignees: false 20 | 21 | markComment: > 22 | [STALE_SET] This issue has been automatically marked as stale because it has not had 23 | recent activity. It will be closed in 14 days if no further activity occurs. Thank you 24 | for your contributions. 25 | 26 | unmarkComment: > 27 | [STALE_CLR] This issue has been removed from the stale queue. Please ensure activity to keep it opening the future. 28 | 29 | closeComment: > 30 | [STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions. 31 | 32 | -------------------------------------------------------------------------------- /.github/workflows/auto-github-actions.yml: -------------------------------------------------------------------------------- 1 | name: auto-github-actions 2 | on: [push] 3 | jobs: 4 | check-bats-version: 5 | runs-on: ubuntu-latest 6 | steps: 7 | - uses: actions/checkout@v3 8 | - uses: actions/setup-node@v3 9 | with: 10 | node-version: '14' 11 | - run: npm install -g bats 12 | - run: bats -v 13 | -------------------------------------------------------------------------------- /.github/workflows/report-size-deltas.yml: -------------------------------------------------------------------------------- 1 | name: Report Size Deltas 2 | 3 | on: 4 | schedule: 5 | - cron: '*/5 * * * *' 6 | 7 | jobs: 8 | report: 9 | runs-on: ubuntu-latest 10 | 11 | steps: 12 | - name: Comment size deltas reports to PRs 13 | uses: arduino/report-size-deltas@v1 14 | with: 15 | # The name of the workflow artifact created by the "Compile Examples" workflow 16 | sketches-reports-source: sketches-reports 17 | -------------------------------------------------------------------------------- /.github/workflows/spell-check.yml: -------------------------------------------------------------------------------- 1 | name: Spell Check 2 | 3 | on: 4 | pull_request: 5 | push: 6 | schedule: 7 | # run every Tuesday at 3 AM UTC 8 | - cron: "0 3 * * 2" 9 | workflow_dispatch: 10 | repository_dispatch: 11 | 12 | jobs: 13 | spellcheck: 14 | runs-on: ubuntu-latest 15 | 16 | steps: 17 | - name: Checkout 18 | uses: actions/checkout@v3 19 | 20 | # See: https://github.com/codespell-project/actions-codespell/blob/master/README.md 21 | - name: Spell check 22 | uses: codespell-project/actions-codespell@master 23 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Prerequisites 2 | *.d 3 | 4 | # Compiled Object files 5 | *.slo 6 | *.lo 7 | *.o 8 | *.obj 9 | 10 | # Precompiled Headers 11 | *.gch 12 | *.pch 13 | 14 | # Compiled Dynamic libraries 15 | *.so 16 | *.dylib 17 | *.dll 18 | 19 | # Fortran module files 20 | *.mod 21 | *.smod 22 | 23 | # Compiled Static libraries 24 | *.lai 25 | *.la 26 | *.a 27 | *.lib 28 | 29 | # Executables 30 | *.exe 31 | *.out 32 | *.app 33 | -------------------------------------------------------------------------------- /CONTRIBUTING.md: -------------------------------------------------------------------------------- 1 | ## Contributing to FTPClient_Generic 2 | 3 | ### Reporting Bugs 4 | 5 | Please report bugs in FTPClient_Generic if you find them. 6 | 7 | However, before reporting a bug please check through the following: 8 | 9 | * [Existing Open Issues](https://github.com/khoih-prog/FTPClient_Generic/issues) - someone might have already encountered this. 10 | 11 | If you don't find anything, please [open a new issue](https://github.com/khoih-prog/FTPClient_Generic/issues/new). 12 | 13 | --- 14 | 15 | ### How to submit a bug report 16 | 17 | Please ensure to specify the following: 18 | 19 | * Arduino IDE version (e.g. 1.8.19) or Platform.io version 20 | * Board Core Version (e.g. Arduino SAMDUE core v1.6.12, ESP32 core v2.0.6, ESP8266 core v3.1.1, ArduinoCore-mbed v3.5.4, etc.) 21 | * Contextual information (e.g. what you were trying to achieve) 22 | * Simplest possible steps to reproduce 23 | * Anything that might be relevant in your opinion, such as: 24 | * Operating system (Windows, Ubuntu, etc.) and the output of `uname -a` 25 | * Network configuration 26 | 27 | Please be educated, civilized and constructive as you've always been. Disrespective posts against [GitHub Code of Conduct](https://docs.github.com/en/site-policy/github-terms/github-event-code-of-conduct) will be ignored and deleted. 28 | 29 | --- 30 | 31 | ### Example 32 | 33 | ``` 34 | Arduino IDE version: 1.8.19 35 | RASPBERRY_PI_PICO board 36 | ArduinoCore-mbed v3.5.4 37 | OS: Ubuntu 20.04 LTS 38 | Linux xy-Inspiron-3593 5.15.0-58-generic #64~20.04.1-Ubuntu SMP Fri Jan 6 16:42:31 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux 39 | 40 | Context: 41 | I encountered a crash while trying to use the Timer Interrupt. 42 | 43 | Steps to reproduce: 44 | 1. ... 45 | 2. ... 46 | 3. ... 47 | 4. ... 48 | ``` 49 | 50 | --- 51 | 52 | ### Sending Feature Requests 53 | 54 | Feel free to post feature requests. It's helpful if you can explain exactly why the feature would be useful. 55 | 56 | There are usually some outstanding feature requests in the [existing issues list](https://github.com/khoih-prog/FTPClient_Generic/issues?q=is%3Aopen+is%3Aissue+label%3Aenhancement), feel free to add comments to them. 57 | 58 | --- 59 | 60 | ### Sending Pull Requests 61 | 62 | Pull Requests with changes and fixes are also welcome! 63 | 64 | Please use the `astyle` to reformat the updated library code as follows (demo for Ubuntu Linux) 65 | 66 | 1. Change directory to the library GitHub 67 | 68 | ``` 69 | xy@xy-Inspiron-3593:~$ cd Arduino/xy/FTPClient_Generic_GitHub/ 70 | xy@xy-Inspiron-3593:~/Arduino/xy/FTPClient_Generic_GitHub$ 71 | ``` 72 | 73 | 2. Issue astyle command 74 | 75 | ``` 76 | xy@xy-Inspiron-3593:~/Arduino/xy/FTPClient_Generic_GitHub$ bash utils/restyle.sh 77 | ``` 78 | 79 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | MIT License 2 | 3 | Copyright (c) 2019 Leonardo Bispo 4 | Copyright (c) 2022 Khoi Hoang 5 | 6 | Permission is hereby granted, free of charge, to any person obtaining a copy 7 | of this software and associated documentation files (the "Software"), to deal 8 | in the Software without restriction, including without limitation the rights 9 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 | copies of the Software, and to permit persons to whom the Software is 11 | furnished to do so, subject to the following conditions: 12 | 13 | The above copyright notice and this permission notice shall be included in all 14 | copies or substantial portions of the Software. 15 | 16 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 19 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 22 | SOFTWARE. 23 | -------------------------------------------------------------------------------- /LibraryPatches/Ethernet2/src/Ethernet2.h: -------------------------------------------------------------------------------- 1 | /* 2 | modified 12 Aug 2013 3 | by Soohwan Kim (suhwan@wiznet.co.kr) 4 | 5 | - 10 Apr. 2015 6 | Added support for Arduino Ethernet Shield 2 7 | by Arduino.org team 8 | 9 | */ 10 | #ifndef ethernet_h 11 | #define ethernet_h 12 | 13 | #include 14 | #include "utility/w5500.h" 15 | #include "IPAddress.h" 16 | #include "EthernetClient.h" 17 | #include "EthernetServer.h" 18 | #include "Dhcp.h" 19 | 20 | 21 | 22 | class EthernetClass 23 | { 24 | private: 25 | IPAddress _dnsServerAddress; 26 | char* _dnsDomainName; 27 | char* _hostName; 28 | DhcpClass* _dhcp; 29 | 30 | // KH add to work with new func void MACAddress(uint8_t *mac_address); and SinricPro v2.5.1+ 31 | uint8_t _mac_address[6] = {0,}; 32 | ////// 33 | 34 | public: 35 | uint8_t w5500_cspin; 36 | 37 | static uint8_t _state[MAX_SOCK_NUM]; 38 | static uint16_t _server_port[MAX_SOCK_NUM]; 39 | 40 | EthernetClass() 41 | { 42 | _dhcp = NULL; 43 | w5500_cspin = 10; 44 | } 45 | void init(uint8_t _cspin = 10) 46 | { 47 | w5500_cspin = _cspin; 48 | } 49 | 50 | #if defined(WIZ550io_WITH_MACADDRESS) 51 | // Initialize function when use the ioShield serise (included WIZ550io) 52 | // WIZ550io has a MAC address which is written after reset. 53 | // Default IP, Gateway and subnet address are also writen. 54 | // so, It needs some initial time. please refer WIZ550io Datasheet in details. 55 | int begin(void); 56 | void begin(IPAddress local_ip); 57 | void begin(IPAddress local_ip, IPAddress dns_server); 58 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 59 | void begin(IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 60 | #else 61 | // Initialize the Ethernet shield to use the provided MAC address and gain the rest of the 62 | // configuration through DHCP. 63 | // Returns 0 if the DHCP configuration failed, and 1 if it succeeded 64 | int begin(uint8_t *mac_address); 65 | void begin(uint8_t *mac_address, IPAddress local_ip); 66 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server); 67 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway); 68 | void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); 69 | 70 | #endif 71 | 72 | int maintain(); 73 | 74 | // KH add to report link status 75 | uint8_t link(); // returns the linkstate, 1 = linked, 0 = no link 76 | const char* linkReport(); // returns the linkstate as a string 77 | ////// 78 | 79 | // KH add to have similar function to Ethernet lib 80 | // Certainly we can use void macAddress(uint8_t mac[]) to read from W5x00. 81 | void MACAddress(uint8_t *mac_address) 82 | { 83 | memcpy(mac_address, _mac_address, sizeof(_mac_address)); 84 | } 85 | ////// 86 | 87 | IPAddress localIP(); 88 | IPAddress subnetMask(); 89 | IPAddress gatewayIP(); 90 | IPAddress dnsServerIP(); 91 | char* dnsDomainName(); 92 | char* hostName(); 93 | 94 | friend class EthernetClient; 95 | friend class EthernetServer; 96 | }; 97 | 98 | extern EthernetClass Ethernet; 99 | 100 | #endif 101 | -------------------------------------------------------------------------------- /LibraryPatches/esp32/cores/esp32/Server.h: -------------------------------------------------------------------------------- 1 | /* 2 | Server.h - Base class that provides Server 3 | Copyright (c) 2011 Adrian McEwen. All right reserved. 4 | 5 | This library is free software; you can redistribute it and/or 6 | modify it under the terms of the GNU Lesser General Public 7 | License as published by the Free Software Foundation; either 8 | version 2.1 of the License, or (at your option) any later version. 9 | 10 | This library is distributed in the hope that it will be useful, 11 | but WITHOUT ANY WARRANTY; without even the implied warranty of 12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 | Lesser General Public License for more details. 14 | 15 | You should have received a copy of the GNU Lesser General Public 16 | License along with this library; if not, write to the Free Software 17 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 18 | */ 19 | 20 | #ifndef server_h 21 | #define server_h 22 | 23 | #include "Print.h" 24 | 25 | class Server: public Print 26 | { 27 | public: 28 | // KH, change to fix compiler error for EthernetWebServer 29 | // error: cannot declare field 'EthernetWebServer::_server' to be of abstract type 'EthernetServer' 30 | // virtual void begin(uint16_t port=0) =0; 31 | //virtual void begin() = 0; 32 | void begin() {}; 33 | }; 34 | 35 | #endif 36 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/1.9.3/variants/rpipico/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | 3 | // Pin definitions taken from: 4 | // https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf 5 | 6 | //KH 7 | // Pin count 8 | // ---- 9 | #define PINS_COUNT (30u) 10 | #define NUM_DIGITAL_PINS (30u) 11 | #define NUM_ANALOG_INPUTS (4u) 12 | #define NUM_ANALOG_OUTPUTS (0u) 13 | ////// 14 | 15 | // LEDs 16 | #define PIN_LED (25u) 17 | #define PIN_LED_0 (16u) 18 | #define PIN_LED_1 (17u) 19 | #define PIN_LED_2 (18u) 20 | // Serial 21 | #define PIN_SERIAL1_TX (0u) 22 | #define PIN_SERIAL1_RX (1u) 23 | 24 | #define PIN_SERIAL2_TX (31u) 25 | #define PIN_SERIAL2_RX (31u) 26 | 27 | 28 | // SPI 29 | #define PIN_SPI0_MISO (4u) 30 | #define PIN_SPI0_MOSI (3u) 31 | #define PIN_SPI0_SCK (2u) 32 | #define PIN_SPI0_SS (5u) 33 | 34 | // static const int SS = PIN_SPI0_SS; // SPI Slave SS not used. Set here only for reference. 35 | // static const int MOSI = PIN_SPI0_MOSI; 36 | // static const int MISO = PIN_SPI0_MISO; 37 | // static const int SCK = PIN_SPI0_SCK; 38 | 39 | #define PIN_SPI1_MISO (12u) 40 | #define PIN_SPI1_MOSI (31u) 41 | #define PIN_SPI1_SCK (31u) 42 | #define PIN_SPI1_SS (31u) 43 | // static const int MISO_1 = PIN_SPI1_MISO; 44 | 45 | #define PIN_A0 (26u) 46 | #define PIN_A1 (27u) 47 | #define PIN_A2 (28u) 48 | #define PIN_A3 (29u) 49 | 50 | static const int A0 = PIN_A0; 51 | static const int A1 = PIN_A1; 52 | static const int A2 = PIN_A2; 53 | static const int A3 = PIN_A3; 54 | 55 | // D0 - D10 56 | #define D26 (26u) 57 | #define D1 (27u) 58 | #define D2 (28u) 59 | #define D3 (29u) 60 | #define D4 (6u) 61 | #define D5 (7u) 62 | #define D0 (0u) 63 | #define D7 (1u) 64 | #define D8 (2u) 65 | #define D9 (4u) 66 | #define D10 (3u) 67 | 68 | // static const int 0 = D0; 69 | 70 | // Wire 71 | #define PIN_WIRE0_SDA (6u) 72 | #define PIN_WIRE0_SCL (7u) 73 | 74 | #define PIN_WIRE1_SDA (26u) 75 | #define PIN_WIRE1_SCL (27u) 76 | 77 | // #define SERIAL_HOWMANY (3u) 78 | // #define SPI_HOWMANY (2u) 79 | // #define WIRE_HOWMANY (2u) 80 | 81 | // #include "../generic/common.h" 82 | -------------------------------------------------------------------------------- /Packages_Patches/Seeeduino/hardware/rp2040/2.7.2/variants/Seeed_XIAO_RP2040/pins_arduino.h: -------------------------------------------------------------------------------- 1 | #pragma once 2 | #include 3 | #include 4 | 5 | #ifndef __PINS_ARDUINO__ 6 | #define __PINS_ARDUINO__ 7 | 8 | #ifdef __cplusplus 9 | extern "C" unsigned int PINCOUNT_fn(); 10 | #endif 11 | 12 | // Pin count 13 | // ---- 14 | #define PINS_COUNT (PINCOUNT_fn()) 15 | #define NUM_DIGITAL_PINS (30u) 16 | #define NUM_ANALOG_INPUTS (4u) 17 | #define NUM_ANALOG_OUTPUTS (0u) 18 | 19 | extern PinName digitalPinToPinName(pin_size_t P); 20 | 21 | // LEDs 22 | // ---- 23 | #define PIN_LED (25u) 24 | #define LED_BUILTIN PIN_LED 25 | 26 | // Digital pins 27 | // ---- 28 | #define PIN_D0 (26u) 29 | #define PIN_D1 (27u) 30 | #define PIN_D2 (28u) 31 | #define PIN_D3 (29u) 32 | #define PIN_D4 (6u) 33 | #define PIN_D5 (7u) 34 | #define PIN_D6 (0u) 35 | #define PIN_D7 (1u) 36 | #define PIN_D8 (2u) 37 | #define PIN_D9 (4u) 38 | #define PIN_D10 (3u) 39 | 40 | static const uint8_t D0 = PIN_D0; 41 | static const uint8_t D1 = PIN_D1; 42 | static const uint8_t D2 = PIN_D2; 43 | static const uint8_t D3 = PIN_D3; 44 | static const uint8_t D4 = PIN_D4; 45 | static const uint8_t D5 = PIN_D5; 46 | static const uint8_t D6 = PIN_D6; 47 | static const uint8_t D7 = PIN_D7; 48 | static const uint8_t D8 = PIN_D8; 49 | static const uint8_t D9 = PIN_D9; 50 | static const uint8_t D10 = PIN_D10; 51 | 52 | 53 | // Analog pins 54 | // ----------- 55 | #define PIN_A0 (26u) 56 | #define PIN_A1 (27u) 57 | #define PIN_A2 (28u) 58 | #define PIN_A3 (29u) 59 | 60 | static const uint8_t A0 = PIN_A0; 61 | static const uint8_t A1 = PIN_A1; 62 | static const uint8_t A2 = PIN_A2; 63 | static const uint8_t A3 = PIN_A3; 64 | 65 | #define ADC_RESOLUTION 12 66 | 67 | // Serial 68 | #define PIN_SERIAL_TX (0ul) 69 | #define PIN_SERIAL_RX (1ul) 70 | 71 | // SPI 72 | //#define PIN_SPI_MISO (16u) 73 | //#define PIN_SPI_MOSI (19u) 74 | //#define PIN_SPI_SCK (18u) 75 | //#define PIN_SPI_SS (17u) 76 | // KH fix wrong pin 77 | #define PIN_SPI_MISO (D9) 78 | #define PIN_SPI_MOSI (D10) 79 | #define PIN_SPI_SCK (D8) 80 | #define PIN_SPI_SS (D7) 81 | ////// 82 | 83 | static const uint8_t SS = PIN_SPI_SS; // SPI Slave SS not used. Set here only for reference. 84 | static const uint8_t MOSI = PIN_SPI_MOSI; 85 | static const uint8_t MISO = PIN_SPI_MISO; 86 | static const uint8_t SCK = PIN_SPI_SCK; 87 | 88 | // Wire 89 | #define SDA (6u) 90 | #define SCL (7u) 91 | 92 | #define SERIAL_HOWMANY 1 93 | #define SERIAL1_TX (digitalPinToPinName(PIN_SERIAL_TX)) 94 | #define SERIAL1_RX (digitalPinToPinName(PIN_SERIAL_RX)) 95 | 96 | #define SERIAL_CDC 1 97 | #define HAS_UNIQUE_ISERIAL_DESCRIPTOR 98 | #define BOARD_VENDORID 0x2886 99 | #define BOARD_PRODUCTID 0x8042 100 | #define BOARD_NAME "RaspberryPi Pico" 101 | 102 | uint8_t getUniqueSerialNumber(uint8_t* name); 103 | void _ontouch1200bps_(); 104 | 105 | #define SPI_HOWMANY (1) 106 | #define SPI_MISO (digitalPinToPinName(PIN_SPI_MISO)) 107 | #define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI)) 108 | #define SPI_SCK (digitalPinToPinName(PIN_SPI_SCK)) 109 | 110 | #define WIRE_HOWMANY (1) 111 | #define I2C_SDA (digitalPinToPinName(SDA)) 112 | #define I2C_SCL (digitalPinToPinName(SCL)) 113 | 114 | #define digitalPinToPort(P) (digitalPinToPinName(P)/32) 115 | 116 | #define SERIAL_PORT_USBVIRTUAL SerialUSB 117 | #define SERIAL_PORT_MONITOR SerialUSB 118 | #define SERIAL_PORT_HARDWARE Serial1 119 | #define SERIAL_PORT_HARDWARE_OPEN Serial1 120 | 121 | #define USB_MAX_POWER (500) 122 | 123 | #endif //__PINS_ARDUINO__ 124 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.22.1/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.23.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/0.24.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.0.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.1.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.2.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/cores/nRF5/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B112_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | 23 | #include "wiring_constants.h" 24 | #include "wiring_digital.h" 25 | #include "nrf.h" 26 | 27 | //https://www.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf 28 | //https://www.u-blox.com/sites/default/files/EVK-NINA-B1_UserGuide_%28UBX-15028120%29_C1-Public.pdf 29 | 30 | const uint32_t g_ADigitalPinMap[] = { 31 | // D0 .. D13 32 | 5, // D0 is P0.05 (UART RX) 33 | 6, // D1 is P0.06 (UART TX) 34 | 7, // D2 is P0.07 35 | 31, // D3 is P0.31 36 | 18, // D4 is P0.18 (LED Blue) 37 | 99, // D5 (NC) 38 | 9, // D6 is P0.09 NFC1 39 | 10, // D7 is P0.10 (Button) NFC2 40 | 99, // D8 (NC) 41 | 8, // D9 is P0.08 42 | 11, // D10 is P0.11 CS 43 | 13, // D11 is P0.13 MOSI 44 | 12, // D12 is P0.12 MISO 45 | 14, // D13 is P0.14 SCK 46 | //I2C 47 | 2, // D14 is P0.2 (SDA) 48 | 3, // D15 is P0.3 (SCL) 49 | // D16 .. D21 (aka A0 .. A5) 50 | 3, // D16 is P0.03 (A0) 51 | 2, // D17 is P0.02 (A1) 52 | 4, // D18 is P0.04 (A2) 53 | 30, // D19 is P0.30 (A3) SW2 54 | 29, // D20 is P0.29 (A4) 55 | 28, // D21 is P0.28 (A5) 56 | 9, // P0.09 NFC 57 | 10, // P0.10 NFC 58 | 16, // SW1 (LED Green) 59 | }; -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/pins_arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | This library is free software; you can redistribute it and/or 4 | modify it under the terms of the GNU Lesser General Public 5 | License as published by the Free Software Foundation; either 6 | version 2.1 of the License, or (at your option) any later version. 7 | This library is distributed in the hope that it will be useful, 8 | but WITHOUT ANY WARRANTY; without even the implied warranty of 9 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 10 | See the GNU Lesser General Public License for more details. 11 | You should have received a copy of the GNU Lesser General Public 12 | License along with this library; if not, write to the Free Software 13 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 14 | */ 15 | 16 | // API compatibility 17 | #include "variant.h" 18 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/NINA_B302_ublox/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | // Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 21 | // See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1) 22 | 23 | #include "variant.h" 24 | #include "wiring_constants.h" 25 | #include "wiring_digital.h" 26 | #include "nrf.h" 27 | 28 | const uint32_t g_ADigitalPinMap[] = 29 | { 30 | // D0 .. D13 31 | 29, // D0 is P0.29 (UART RX) 32 | 45, // D1 is P1.13 (UART TX) 33 | 44, // D2 is P1.12 (NFC2) 34 | 31, // D3 is P0.31 (LED1) 35 | 13, // D4 is P0.13 (LED2) 36 | 11, // D5 is P0.11 37 | 9, // D6 is P0.09 38 | 10, // D7 is P0.10 (Button) 39 | 41, // D8 is P1.09 40 | 12, // D9 is P0.12 41 | 14, // D10 is P0.14 42 | 15, // D11 is P0.15 43 | 32, // D12 is P1.00 44 | 7, // D13 is P0.07 45 | 46 | // D14 .. D21 (aka A0 .. A5) 47 | 4, // D14 is P0.04 (A0) 48 | 30, // D15 is P0.30 (A1) 49 | 5, // D16 is P0.05 (A2) 50 | 2, // D17 is P0.02 (A3) 51 | 28, // D18 is P0.28 (A4) 52 | 3, // D19 is P0.03 (A5) 53 | 54 | // D20 .. D21 (aka I2C pins) 55 | 16, // D20 is P0.16 (SDA) 56 | 24, // D21 is P0.24 (SCL) 57 | 58 | // QSPI pins (not exposed via any header / test point) 59 | 19, // D22 is P0.19 (QSPI CLK) 60 | 17, // D23 is P0.17 (QSPI CS) 61 | 20, // D24 is P0.20 (QSPI Data 0) 62 | 21, // D25 is P0.21 (QSPI Data 1) 63 | 22, // D26 is P0.22 (QSPI Data 2) 64 | 26, // D27 is P0.23 (QSPI Data 3) 65 | 66 | 40, // D28 is P1.08 - IO34 67 | 41, // D29 is P1.01 - IO35 68 | 44, // D30 is P1.02 - IO36 69 | 45, // D31 is P1.03 - IO37 70 | 42, // D32 is P1.10 - IO38 71 | 43, // D33 is P1.11 - IO39 72 | 47, // D34 is P1.15 - IO40 73 | 46, // D35 is P1.14 - IO41 74 | 26, // D36 is P0.26 - IO42 75 | 6, // D37 is P0.6 - IO43 76 | 27, // D38 is P0.27 - IO44 77 | }; 78 | 79 | void initVariant() 80 | { 81 | // LED1 & LED2 82 | pinMode(PIN_LED1, OUTPUT); 83 | ledOff(PIN_LED1); 84 | 85 | pinMode(PIN_LED2, OUTPUT); 86 | ledOff(PIN_LED2); 87 | } 88 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/nrf52/1.3.0/variants/sparkfun_nrf52840_mini/variant.cpp: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2014-2015 Arduino LLC. All right reserved. 3 | Copyright (c) 2016 Sandeep Mistry All right reserved. 4 | Copyright (c) 2018, Adafruit Industries (adafruit.com) 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 14 | See the GNU Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #include "variant.h" 22 | #include "wiring_constants.h" 23 | #include "wiring_digital.h" 24 | #include "nrf.h" 25 | 26 | const uint32_t g_ADigitalPinMap[] = 27 | { 28 | // P0 29 | 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 30 | 8 , 9 , 10, 11, 12, 13, 14, 15, 31 | 16, 17, 18, 19, 20, 21, 22, 23, 32 | 24, 25, 26, 27, 28, 29, 30, 31, 33 | 34 | // P1 35 | 32, 33, 34, 35, 36, 37, 38, 39, 36 | 40, 41, 42, 43, 44, 45, 46, 47, 37 | 48, 49, 50, 51, 52, 53, 54, 55, 38 | 56, 57, 58, 59, 60, 61, 62, 63 39 | }; 40 | void initVariant() 41 | { 42 | // LED1 & LED2 43 | pinMode(PIN_LED1, OUTPUT); 44 | ledOff(PIN_LED1); 45 | 46 | pinMode(PIN_LED2, OUTPUT); 47 | ledOff(PIN_LED2); 48 | } 49 | 50 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.5.14/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.0/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.3/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.4/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.5/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.6/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.7/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.6.8/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.7.0/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.7.1/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/adafruit/hardware/samd/1.7.2/cores/arduino/Print.h: -------------------------------------------------------------------------------- 1 | /* 2 | Copyright (c) 2016 Arduino LLC. All right reserved. 3 | 4 | This library is free software; you can redistribute it and/or 5 | modify it under the terms of the GNU Lesser General Public 6 | License as published by the Free Software Foundation; either 7 | version 2.1 of the License, or (at your option) any later version. 8 | 9 | This library is distributed in the hope that it will be useful, 10 | but WITHOUT ANY WARRANTY; without even the implied warranty of 11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 12 | See the GNU Lesser General Public License for more details. 13 | 14 | You should have received a copy of the GNU Lesser General Public 15 | License along with this library; if not, write to the Free Software 16 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 17 | */ 18 | 19 | #pragma once 20 | 21 | #include 22 | #include // for size_t 23 | 24 | #include "WString.h" 25 | #include "Printable.h" 26 | 27 | #define DEC 10 28 | #define HEX 16 29 | #define OCT 8 30 | #define BIN 2 31 | 32 | class Print 33 | { 34 | private: 35 | int write_error; 36 | size_t printNumber(unsigned long, uint8_t); 37 | size_t printULLNumber(unsigned long long, uint8_t); 38 | size_t printFloat(double, int); 39 | protected: 40 | void setWriteError(int err = 1) { write_error = err; } 41 | public: 42 | Print() : write_error(0) {} 43 | 44 | int getWriteError() { return write_error; } 45 | void clearWriteError() { setWriteError(0); } 46 | 47 | virtual size_t write(uint8_t) = 0; 48 | size_t write(const char *str) { 49 | if (str == NULL) return 0; 50 | return write((const uint8_t *)str, strlen(str)); 51 | } 52 | virtual size_t write(const uint8_t *buffer, size_t size); 53 | size_t write(const char *buffer, size_t size) { 54 | return write((const uint8_t *)buffer, size); 55 | } 56 | 57 | // default to zero, meaning "a single write may block" 58 | // should be overridden by subclasses with buffering 59 | virtual int availableForWrite() { return 0; } 60 | 61 | size_t print(const __FlashStringHelper *); 62 | size_t print(const String &); 63 | size_t print(const char[]); 64 | size_t print(char); 65 | size_t print(unsigned char, int = DEC); 66 | size_t print(int, int = DEC); 67 | size_t print(unsigned int, int = DEC); 68 | size_t print(long, int = DEC); 69 | size_t print(unsigned long, int = DEC); 70 | size_t print(long long, int = DEC); 71 | size_t print(unsigned long long, int = DEC); 72 | size_t print(double, int = 2); 73 | size_t print(const Printable&); 74 | 75 | size_t println(const __FlashStringHelper *); 76 | size_t println(const String &s); 77 | size_t println(const char[]); 78 | size_t println(char); 79 | size_t println(unsigned char, int = DEC); 80 | size_t println(int, int = DEC); 81 | size_t println(unsigned int, int = DEC); 82 | size_t println(long, int = DEC); 83 | size_t println(unsigned long, int = DEC); 84 | size_t println(long long, int = DEC); 85 | size_t println(unsigned long long, int = DEC); 86 | size_t println(double, int = 2); 87 | size_t println(const Printable&); 88 | size_t println(void); 89 | 90 | size_t printf(const char * format, ...); 91 | 92 | size_t printBuffer(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 93 | size_t printBuffer(char const buffer[], int size, char delim=' ', int byteline = 0) 94 | { 95 | return printBuffer((uint8_t const*) buffer, size, delim, byteline); 96 | } 97 | 98 | size_t printBufferReverse(uint8_t const buffer[], int len, char delim=' ', int byteline = 0); 99 | size_t printBufferReverse(char const buffer[], int size, char delim=' ', int byteline = 0) 100 | { 101 | return printBufferReverse((uint8_t const*) buffer, size, delim, byteline); 102 | } 103 | 104 | virtual void flush() { /* Empty implementation for backward compatibility */ } 105 | }; 106 | 107 | 108 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.5.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.6.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.7.2/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/2.8.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.0.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.1.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.3.0/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/arduino/hardware/mbed_portenta/3.4.1/portenta_post_install.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | portenta_h7_rules () { 4 | echo "" 5 | echo "# Portenta H7 bootloader mode UDEV rules" 6 | echo "" 7 | cat < /etc/udev/rules.d/49-portenta_h7.rules 18 | 19 | # reload udev rules 20 | echo "Reload rules..." 21 | udevadm trigger 22 | udevadm control --reload-rules 23 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.3.1/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /Packages_Patches/rp2040/hardware/rp2040/1.4.0/cores/rp2040/Arduino.h: -------------------------------------------------------------------------------- 1 | /* 2 | Arduino header for the Raspberry Pi Pico RP2040 3 | 4 | Copyright (c) 2021 Earle F. Philhower, III 5 | 6 | This library is free software; you can redistribute it and/or 7 | modify it under the terms of the GNU Lesser General Public 8 | License as published by the Free Software Foundation; either 9 | version 2.1 of the License, or (at your option) any later version. 10 | 11 | This library is distributed in the hope that it will be useful, 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 | Lesser General Public License for more details. 15 | 16 | You should have received a copy of the GNU Lesser General Public 17 | License along with this library; if not, write to the Free Software 18 | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 19 | */ 20 | 21 | #ifndef Arduino_h 22 | #define Arduino_h 23 | 24 | #include 25 | #include 26 | #include 27 | // Wacky deprecated AVR compatibilty functions 28 | #include "stdlib_noniso.h" 29 | 30 | #include "api/ArduinoAPI.h" 31 | #include 32 | 33 | 34 | // Required for the port*Register macros 35 | #include "hardware/gpio.h" 36 | 37 | #include "debug_internal.h" 38 | 39 | #ifdef __cplusplus 40 | extern "C" { 41 | #endif // __cplusplus 42 | 43 | // For compatibility to many platforms and libraries 44 | #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) 45 | #define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) 46 | #define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) 47 | 48 | // Disable/reenable all interrupts. Safely handles nested disables 49 | void interrupts(); 50 | void noInterrupts(); 51 | 52 | // GPIO change/value interrupts 53 | void attachInterrupt(pin_size_t pin, voidFuncPtr callback, PinStatus mode); 54 | void detachInterrupt(pin_size_t pin); 55 | 56 | // AVR compatibilty macros...naughty and accesses the HW directly 57 | #define digitalPinToPort(pin) (0) 58 | #define digitalPinToBitMask(pin) (1UL << (pin)) 59 | #define digitalPinToTimer(pin) (0) 60 | #define digitalPinToInterrupt(pin) (pin) 61 | #define NOT_AN_INTERRUPT (-1) 62 | #define portOutputRegister(port) ((volatile uint32_t*) sio_hw->gpio_out) 63 | #define portInputRegister(port) ((volatile uint32_t*) sio_hw->gpio_in) 64 | #define portModeRegister(port) ((volatile uint32_t*) sio_hw->gpio_oe) 65 | 66 | // IO config 67 | void pinMode(pin_size_t pinNumber, PinMode pinMode); 68 | 69 | // SIO (GPIO) 70 | void digitalWrite(pin_size_t pinNumber, PinStatus status); 71 | PinStatus digitalRead(pin_size_t pinNumber); 72 | 73 | // ADC 74 | int analogRead(pin_size_t pinNumber); 75 | float analogReadTemp(); // Returns core temp in Centigrade 76 | 77 | // PWM 78 | void analogWrite(pin_size_t pinNumber, int value); 79 | void analogWriteFreq(uint32_t freq); 80 | void analogWriteRange(uint32_t range); 81 | void analogWriteResolution(int res); 82 | 83 | // Timing 84 | void delay(unsigned long); 85 | void delayMicroseconds(unsigned int us); 86 | unsigned long millis(); 87 | 88 | #ifdef __cplusplus 89 | } // extern "C" 90 | #endif 91 | 92 | // Ancient AVR defines 93 | #define HAVE_HWSERIAL0 94 | #define HAVE_HWSERIAL1 95 | #define HAVE_HWSERIAL2 96 | 97 | #ifdef __cplusplus 98 | #include "SerialUSB.h" 99 | #include "SerialUART.h" 100 | #include "RP2040.h" 101 | #include "Bootsel.h" 102 | 103 | // Template which will evaluate at *compile time* to a single 32b number 104 | // with the specified bits set. 105 | template 106 | constexpr uint32_t __bitset(const int (&a)[N], size_t i = 0U) 107 | { 108 | return i < N ? (1L << a[i]) | __bitset(a, i + 1) : 0; 109 | } 110 | #endif 111 | 112 | 113 | // ARM toolchain doesn't provide itoa etc, provide them 114 | #include "api/itoa.h" 115 | 116 | #endif // Arduino_h 117 | -------------------------------------------------------------------------------- /changelog.md: -------------------------------------------------------------------------------- 1 | ## FTPClient_Generic Library 2 | 3 | [![arduino-library-badge](https://www.ardu-badge.com/badge/FTPClient_Generic.svg?)](https://www.ardu-badge.com/FTPClient_Generic) 4 | [![GitHub release](https://img.shields.io/github/release/khoih-prog/FTPClient_Generic.svg)](https://github.com/khoih-prog/FTPClient_Generic/releases) 5 | [![GitHub](https://img.shields.io/github/license/mashape/apistatus.svg)](https://github.com/khoih-prog/FTPClient_Generic/blob/main/LICENSE) 6 | [![contributions welcome](https://img.shields.io/badge/contributions-welcome-brightgreen.svg?style=flat)](#Contributing) 7 | [![GitHub issues](https://img.shields.io/github/issues/khoih-prog/FTPClient_Generic.svg)](http://github.com/khoih-prog/FTPClient_Generic/issues) 8 | 9 | 10 | Donate to my libraries using BuyMeACoffee 11 | 12 | 13 | --- 14 | --- 15 | 16 | ## Table of Contents 17 | 18 | 19 | * [Changelog](#changelog) 20 | * [Releases v1.6.0](#releases-v160) 21 | * [Releases v1.5.0](#releases-v150) 22 | * [Releases v1.4.0](#releases-v140) 23 | * [Releases v1.3.0](#releases-v130) 24 | * [Releases v1.2.1](#releases-v121) 25 | * [Releases v1.2.0](#releases-v120) 26 | * [Releases v1.1.0](#releases-v110) 27 | * [Releases v1.0.0](#releases-v100) 28 | 29 | --- 30 | --- 31 | 32 | ## Changelog 33 | 34 | #### Releases v1.6.0 35 | 36 | 1. Add support to WIZNet `W6100` using [`Ethernet_Generic`](https://github.com/khoih-prog/Ethernet_Generic) library 37 | 38 | #### Releases v1.5.0 39 | 40 | 1. Add support to `RP2040W` with `CYW43439` WiFi using `arduino-pico` core 41 | 42 | #### Releases v1.4.0 43 | 44 | 1. Add support to `ESP32/ESP8266` using Ethernet `W5x00` or `ENC28J60` with [`Ethernet_Generic`](https://github.com/khoih-prog/Ethernet_Generic) or [`EthernetENC`](https://github.com/jandrassy/EthernetENC) library 45 | 2. Add astyle using `allman` style. Restyle the library 46 | 3. Update `Packages' Patches` 47 | 48 | #### Releases v1.3.0 49 | 50 | 1. Fix uploading issue of large files for WiFi, QNEthernet 51 | 52 | #### Releases v1.2.1 53 | 54 | 1. Auto detect server response type in PASV mode 55 | 56 | #### Releases v1.2.0 57 | 58 | 1. Add support to other new FTP Servers, such as [`vsftpd`](https://ubuntu.com/server/docs/service-ftp) in Linux, Ubuntu, Rasbberry Pi, etc. 59 | 2. Fix bug 60 | 3. Update examples 61 | 62 | 63 | #### Releases v1.1.0 64 | 65 | 1. Add support to Teensy 4.1 using QNEthernet or NativeEthernet 66 | 2. Add examples for QNEthernet and NativeEthernet 67 | 68 | #### Releases v1.0.0 69 | 70 | 1. Initial porting and coding to support many more boards, using WiFi or Ethernet 71 | 72 | 73 | -------------------------------------------------------------------------------- /examples/QNEthernet/FTPClient_DownloadFile/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | #define _FTP_LOGLEVEL_ 4 18 | 19 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 20 | // For Teensy 4.1 21 | #define BOARD_TYPE "TEENSY 4.1" 22 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 23 | #define USE_NATIVE_ETHERNET false 24 | #define USE_QN_ETHERNET true 25 | #else 26 | #error Only Teensy 4.1 supported 27 | #endif 28 | 29 | #if USE_QN_ETHERNET 30 | #define FTP_CLIENT_USING_QNETHERNET true 31 | #elif USE_NATIVE_ETHERNET 32 | #define FTP_CLIENT_USING_NATIVE_ETHERNET true 33 | #endif 34 | 35 | #ifndef BOARD_NAME 36 | #define BOARD_NAME BOARD_TYPE 37 | #endif 38 | 39 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 40 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 41 | 42 | #define USE_UIP_ETHERNET false 43 | #define USE_ETHERNET_GENERIC false 44 | #define USE_ETHERNET_ESP8266 false 45 | #define USE_ETHERNET_ENC false 46 | #define USE_CUSTOM_ETHERNET false 47 | 48 | #if USE_NATIVE_ETHERNET 49 | #include "NativeEthernet.h" 50 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 51 | #define SHIELD_TYPE "NativeEthernet" 52 | #elif USE_QN_ETHERNET 53 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 54 | using namespace qindesign::network; 55 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 56 | #define SHIELD_TYPE "QNEthernet" 57 | #endif 58 | 59 | #include 60 | 61 | #if USE_NATIVE_ETHERNET 62 | // Enter a MAC address and IP address for your controller below. 63 | #define NUMBER_OF_MAC 20 64 | 65 | byte mac[][NUMBER_OF_MAC] = 66 | { 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 80 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 81 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 82 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 83 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 84 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 85 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 86 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 87 | }; 88 | 89 | #else 90 | 91 | #define USING_DHCP false //true 92 | 93 | #if !USING_DHCP 94 | // Set the static IP address to use if the DHCP fails to assign 95 | IPAddress myIP(192, 168, 2, 222); 96 | IPAddress myNetmask(255, 255, 255, 0); 97 | IPAddress myGW(192, 168, 2, 1); 98 | //IPAddress mydnsServer(192, 168, 2, 1); 99 | IPAddress mydnsServer(8, 8, 8, 8); 100 | #endif 101 | 102 | #endif 103 | 104 | #endif //defines_h 105 | -------------------------------------------------------------------------------- /examples/QNEthernet/FTPClient_ListFiles/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | #define _FTP_LOGLEVEL_ 4 18 | 19 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 20 | // For Teensy 4.1 21 | #define BOARD_TYPE "TEENSY 4.1" 22 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 23 | #define USE_NATIVE_ETHERNET false 24 | #define USE_QN_ETHERNET true 25 | #else 26 | #error Only Teensy 4.1 supported 27 | #endif 28 | 29 | #if USE_QN_ETHERNET 30 | #define FTP_CLIENT_USING_QNETHERNET true 31 | #elif USE_NATIVE_ETHERNET 32 | #define FTP_CLIENT_USING_NATIVE_ETHERNET true 33 | #endif 34 | 35 | #ifndef BOARD_NAME 36 | #define BOARD_NAME BOARD_TYPE 37 | #endif 38 | 39 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 40 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 41 | 42 | #define USE_UIP_ETHERNET false 43 | #define USE_ETHERNET_GENERIC false 44 | #define USE_ETHERNET_ESP8266 false 45 | #define USE_ETHERNET_ENC false 46 | #define USE_CUSTOM_ETHERNET false 47 | 48 | #if USE_NATIVE_ETHERNET 49 | #include "NativeEthernet.h" 50 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 51 | #define SHIELD_TYPE "NativeEthernet" 52 | #elif USE_QN_ETHERNET 53 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 54 | using namespace qindesign::network; 55 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 56 | #define SHIELD_TYPE "QNEthernet" 57 | #endif 58 | 59 | #include 60 | 61 | #if USE_NATIVE_ETHERNET 62 | // Enter a MAC address and IP address for your controller below. 63 | #define NUMBER_OF_MAC 20 64 | 65 | byte mac[][NUMBER_OF_MAC] = 66 | { 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 80 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 81 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 82 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 83 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 84 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 85 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 86 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 87 | }; 88 | 89 | #else 90 | 91 | #define USING_DHCP false //true 92 | 93 | #if !USING_DHCP 94 | // Set the static IP address to use if the DHCP fails to assign 95 | IPAddress myIP(192, 168, 2, 222); 96 | IPAddress myNetmask(255, 255, 255, 0); 97 | IPAddress myGW(192, 168, 2, 1); 98 | //IPAddress mydnsServer(192, 168, 2, 1); 99 | IPAddress mydnsServer(8, 8, 8, 8); 100 | #endif 101 | 102 | #endif 103 | 104 | #endif //defines_h 105 | -------------------------------------------------------------------------------- /examples/QNEthernet/FTPClient_UploadImage/defines.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | defines.h 3 | EthernetWebServer is a library for the Ethernet shields to run WebServer 4 | 5 | Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases 6 | Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer 7 | Licensed under MIT license 8 | ***************************************************************************************************************************************/ 9 | 10 | #ifndef defines_h 11 | #define defines_h 12 | 13 | #define DEBUG_ETHERNET_WEBSERVER_PORT Serial 14 | 15 | // Debug Level from 0 to 4 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 17 | #define _FTP_LOGLEVEL_ 4 18 | 19 | #if ( defined(CORE_TEENSY) && defined(__IMXRT1062__) && defined(ARDUINO_TEENSY41) ) 20 | // For Teensy 4.1 21 | #define BOARD_TYPE "TEENSY 4.1" 22 | // Use true for NativeEthernet Library, false if using other Ethernet libraries 23 | #define USE_NATIVE_ETHERNET true 24 | #define USE_QN_ETHERNET false 25 | #else 26 | #error Only Teensy 4.1 supported 27 | #endif 28 | 29 | #if USE_QN_ETHERNET 30 | #define FTP_CLIENT_USING_QNETHERNET true 31 | #elif USE_NATIVE_ETHERNET 32 | #define FTP_CLIENT_USING_NATIVE_ETHERNET true 33 | #endif 34 | 35 | #ifndef BOARD_NAME 36 | #define BOARD_NAME BOARD_TYPE 37 | #endif 38 | 39 | // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) 40 | // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) 41 | 42 | #define USE_UIP_ETHERNET false 43 | #define USE_ETHERNET_GENERIC false 44 | #define USE_ETHERNET_ESP8266 false 45 | #define USE_ETHERNET_ENC false 46 | #define USE_CUSTOM_ETHERNET false 47 | 48 | #if USE_NATIVE_ETHERNET 49 | #include "NativeEthernet.h" 50 | #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 51 | #define SHIELD_TYPE "NativeEthernet" 52 | #elif USE_QN_ETHERNET 53 | #include "QNEthernet.h" // https://github.com/ssilverman/QNEthernet 54 | using namespace qindesign::network; 55 | #warning Using QNEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error 56 | #define SHIELD_TYPE "QNEthernet" 57 | #endif 58 | 59 | #include 60 | 61 | #if USE_NATIVE_ETHERNET 62 | // Enter a MAC address and IP address for your controller below. 63 | #define NUMBER_OF_MAC 20 64 | 65 | byte mac[][NUMBER_OF_MAC] = 66 | { 67 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, 68 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, 69 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, 70 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, 71 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, 72 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, 73 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, 74 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, 75 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, 76 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, 77 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, 78 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, 79 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, 80 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, 81 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, 82 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, 83 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, 84 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, 85 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, 86 | { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, 87 | }; 88 | 89 | #else 90 | 91 | #define USING_DHCP false //true 92 | 93 | #if !USING_DHCP 94 | // Set the static IP address to use if the DHCP fails to assign 95 | IPAddress myIP(192, 168, 2, 222); 96 | IPAddress myNetmask(255, 255, 255, 0); 97 | IPAddress myGW(192, 168, 2, 1); 98 | //IPAddress mydnsServer(192, 168, 2, 1); 99 | IPAddress mydnsServer(8, 8, 8, 8); 100 | #endif 101 | 102 | #endif 103 | 104 | #endif //defines_h 105 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_DownloadFile/debug.cfg: -------------------------------------------------------------------------------- 1 | # SPDX-License-Identifier: GPL-2.0-or-later 2 | # 3 | # Example OpenOCD configuration file for ESP32-S2 Kaluga board. 4 | # 5 | # For example, OpenOCD can be started for ESP32-S2 debugging on 6 | # 7 | # openocd -f board/esp32s2-kaluga-1.cfg 8 | # 9 | 10 | source [find interface/ftdi/esp32s2_kaluga_v1.cfg] 11 | source [find target/esp32s2.cfg] 12 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_DownloadFile/debug_custom.json: -------------------------------------------------------------------------------- 1 | { 2 | "name":"Arduino on ESP32-S2", 3 | "toolchainPrefix":"xtensa-esp32s2-elf", 4 | "svdFile":"debug.svd", 5 | "request":"attach", 6 | "postAttachCommands":[ 7 | "set remote hardware-watchpoint-limit 2", 8 | "monitor reset halt", 9 | "monitor gdb_sync", 10 | "thb setup", 11 | "c" 12 | ], 13 | "overrideRestartCommands":[ 14 | "monitor reset halt", 15 | "monitor gdb_sync", 16 | "thb setup", 17 | "c" 18 | ] 19 | } -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_ListFiles/FTPClient_ListFiles.ino: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | FTPClient_DownloadFile.ino 3 | 4 | FTP Client for Generic boards using SD, FS, etc. 5 | 6 | Based on and modified from 7 | 8 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 9 | 10 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 11 | ******************************************************************************/ 12 | 13 | #include "Arduino.h" 14 | 15 | #include "defines.h" 16 | 17 | #include 18 | 19 | // To use `true` with the following PASV mode asnswer from server, such as `VSFTP` 20 | // 227 Entering Passive Mode (192,168,2,112,157,218) 21 | // Using `false` with old style PASV answer, such as `FTP_Server_Teensy41` library 22 | // 227 Entering Passive Mode (4043483328, port 55600) 23 | #define USING_VSFTP_SERVER true 24 | 25 | #if USING_VSFTP_SERVER 26 | 27 | // Change according to your FTP server 28 | char ftp_server[] = "192.168.2.112"; 29 | 30 | char ftp_user[] = "ftp_test"; 31 | char ftp_pass[] = "ftp_test"; 32 | 33 | char dirName[] = "/home/ftp_test"; 34 | char newDirName[] = "/home/ftp_test/NewDir"; 35 | 36 | #else 37 | 38 | // Change according to your FTP server 39 | char ftp_server[] = "192.168.2.241"; 40 | 41 | char ftp_user[] = "teensy4x"; 42 | char ftp_pass[] = "ftp_test"; 43 | 44 | char dirName[] = "/"; 45 | char newDirName[] = "/NewDir"; 46 | 47 | #endif 48 | 49 | // FTPClient_Generic(char* _serverAdress, char* _userName, char* _passWord, uint16_t _timeout = 10000); 50 | FTPClient_Generic ftp (ftp_server, ftp_user, ftp_pass, 60000); 51 | 52 | 53 | void setup() 54 | { 55 | Serial.begin( 115200 ); 56 | 57 | while (!Serial && millis() < 5000); 58 | 59 | delay(500); 60 | 61 | Serial.print(F("\nStarting FTPClient_ListFiles on ")); 62 | Serial.print(BOARD_NAME); 63 | Serial.print(F(" with ")); 64 | Serial.println(SHIELD_TYPE); 65 | Serial.println(FTPCLIENT_GENERIC_VERSION); 66 | 67 | 68 | WiFi.begin( WIFI_SSID, WIFI_PASS ); 69 | 70 | Serial.print("Connecting WiFi, SSID = "); 71 | Serial.println(WIFI_SSID); 72 | 73 | while (WiFi.status() != WL_CONNECTED) 74 | { 75 | delay(500); 76 | Serial.print("."); 77 | } 78 | 79 | Serial.print("\nIP address: "); 80 | Serial.println(WiFi.localIP()); 81 | 82 | #if (ESP32) 83 | Serial.print("Max Free Heap: "); 84 | Serial.println(ESP.getMaxAllocHeap()); 85 | #endif 86 | 87 | ftp.OpenConnection(); 88 | 89 | //Change directory 90 | ftp.ChangeWorkDir(dirName); 91 | 92 | // Get the file size 93 | String list[128]; 94 | 95 | // Get the directory content in order to allocate buffer 96 | // my server response => type=file;modify=20190101000010;size=18; helloworld.txt 97 | 98 | ftp.InitFile(COMMAND_XFER_TYPE_ASCII); 99 | 100 | ftp.ContentListWithListCommand("", list); 101 | 102 | for (uint16_t i = 0; i < sizeof(list); i++) 103 | { 104 | if (list[i].length() > 0) 105 | Serial.println(list[i]); 106 | else 107 | break; 108 | } 109 | 110 | //Create a new Directory 111 | ftp.InitFile(COMMAND_XFER_TYPE_BINARY); 112 | ftp.RemoveDir(newDirName); 113 | ftp.MakeDir(newDirName); 114 | 115 | //Enter the directory 116 | ftp.ChangeWorkDir(newDirName); 117 | 118 | Serial.println("CloseConnection"); 119 | 120 | ftp.CloseConnection(); 121 | } 122 | 123 | void loop() 124 | { 125 | } 126 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_ListFiles/debug.cfg: -------------------------------------------------------------------------------- 1 | # SPDX-License-Identifier: GPL-2.0-or-later 2 | # 3 | # Example OpenOCD configuration file for ESP32-WROVER-KIT board. 4 | # 5 | # For example, OpenOCD can be started for ESP32 debugging on 6 | # 7 | # openocd -f board/esp32-wrover-kit-3.3v.cfg 8 | # 9 | 10 | # Source the JTAG interface configuration file 11 | source [find interface/ftdi/esp32_devkitj_v1.cfg] 12 | set ESP32_FLASH_VOLTAGE 3.3 13 | # Source the ESP32 configuration file 14 | source [find target/esp32.cfg] 15 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_ListFiles/debug_custom.json: -------------------------------------------------------------------------------- 1 | { 2 | "name":"Arduino on ESP32", 3 | "toolchainPrefix":"xtensa-esp32-elf", 4 | "svdFile":"debug.svd", 5 | "request":"attach", 6 | "postAttachCommands":[ 7 | "set remote hardware-watchpoint-limit 2", 8 | "monitor reset halt", 9 | "monitor gdb_sync", 10 | "thb setup", 11 | "c" 12 | ], 13 | "overrideRestartCommands":[ 14 | "monitor reset halt", 15 | "monitor gdb_sync", 16 | "thb setup", 17 | "c" 18 | ] 19 | } -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_UploadImage/FTPClient_UploadImage.ino: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | FTPClient_UploadImage.ino 3 | 4 | FTP Client for Generic boards using SD, FS, etc. 5 | 6 | Based on and modified from 7 | 8 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 9 | 10 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 11 | ******************************************************************************/ 12 | 13 | #include "Arduino.h" 14 | 15 | #include "defines.h" 16 | 17 | #include 18 | #include "octocat.h" 19 | 20 | // To use `true` with the following PASV mode asnswer from server, such as `VSFTP` 21 | // 227 Entering Passive Mode (192,168,2,112,157,218) 22 | // Using `false` with old style PASV answer, such as `FTP_Server_Teensy41` library 23 | // 227 Entering Passive Mode (4043483328, port 55600) 24 | #define USING_VSFTP_SERVER true 25 | 26 | #if USING_VSFTP_SERVER 27 | 28 | // Change according to your FTP server 29 | char ftp_server[] = "192.168.2.112"; 30 | 31 | char ftp_user[] = "ftp_test"; 32 | char ftp_pass[] = "ftp_test"; 33 | 34 | char dirName[] = "/home/ftp_test"; 35 | char newDirName[] = "/home/ftp_test/NewDir"; 36 | 37 | #else 38 | 39 | // Change according to your FTP server 40 | char ftp_server[] = "192.168.2.241"; 41 | 42 | char ftp_user[] = "teensy4x"; 43 | char ftp_pass[] = "ftp_test"; 44 | 45 | char dirName[] = "/"; 46 | char newDirName[] = "/NewDir"; 47 | 48 | #endif 49 | 50 | // FTPClient_Generic(char* _serverAdress, char* _userName, char* _passWord, uint16_t _timeout = 10000); 51 | FTPClient_Generic ftp (ftp_server, ftp_user, ftp_pass, 60000); 52 | 53 | void setup() 54 | { 55 | Serial.begin( 115200 ); 56 | 57 | while (!Serial && millis() < 5000); 58 | 59 | delay(500); 60 | 61 | Serial.print(F("\nStarting FTPClient_UploadImage on ")); 62 | Serial.print(BOARD_NAME); 63 | Serial.print(F(" with ")); 64 | Serial.println(SHIELD_TYPE); 65 | Serial.println(FTPCLIENT_GENERIC_VERSION); 66 | 67 | WiFi.begin( WIFI_SSID, WIFI_PASS ); 68 | 69 | Serial.print("Connecting WiFi, SSID = "); 70 | Serial.println(WIFI_SSID); 71 | 72 | while (WiFi.status() != WL_CONNECTED) 73 | { 74 | delay(500); 75 | Serial.print("."); 76 | } 77 | 78 | Serial.print("\nIP address: "); 79 | Serial.println(WiFi.localIP()); 80 | 81 | #if (ESP32) 82 | Serial.print("Max Free Heap: "); 83 | Serial.println(ESP.getMaxAllocHeap()); 84 | #endif 85 | 86 | ftp.OpenConnection(); 87 | 88 | //Change directory 89 | ftp.ChangeWorkDir(dirName); 90 | 91 | // Get the file size 92 | String list[128]; 93 | 94 | // Get the directory content in order to allocate buffer 95 | // my server response => type=file;modify=20190101000010;size=18; helloworld.txt 96 | 97 | ftp.InitFile(COMMAND_XFER_TYPE_ASCII); 98 | 99 | ftp.ContentListWithListCommand("", list); 100 | 101 | for (uint16_t i = 0; i < sizeof(list); i++) 102 | { 103 | if (list[i].length() > 0) 104 | Serial.println(list[i]); 105 | else 106 | break; 107 | } 108 | 109 | #if !(ESP8266) 110 | // Make a new directory 111 | //ftp.InitFile(COMMAND_XFER_TYPE_ASCII); 112 | //ftp.MakeDir("myNewDir"); 113 | 114 | // Create the new file and send the image 115 | //ftp.ChangeWorkDir("myNewDir"); 116 | Serial.print("Writing octocat.jpg, size = "); 117 | Serial.println(sizeof(octocat_pic)); 118 | 119 | ftp.InitFile(COMMAND_XFER_TYPE_BINARY); 120 | ftp.NewFile("octocat.jpg"); 121 | ftp.WriteData( octocat_pic, sizeof(octocat_pic) ); 122 | ftp.CloseFile(); 123 | 124 | // Create the file new and write a string into it 125 | Serial.println("Writing hello_world.txt"); 126 | 127 | ftp.InitFile(COMMAND_XFER_TYPE_ASCII); 128 | ftp.NewFile("hello_world.txt"); 129 | ftp.Write("Hello World"); 130 | ftp.CloseFile(); 131 | #endif 132 | 133 | ftp.CloseConnection(); 134 | } 135 | 136 | void loop() 137 | { 138 | } 139 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_UploadImage/debug.cfg: -------------------------------------------------------------------------------- 1 | # SPDX-License-Identifier: GPL-2.0-or-later 2 | # 3 | # Example OpenOCD configuration file for ESP32-WROVER-KIT board. 4 | # 5 | # For example, OpenOCD can be started for ESP32 debugging on 6 | # 7 | # openocd -f board/esp32-wrover-kit-3.3v.cfg 8 | # 9 | 10 | # Source the JTAG interface configuration file 11 | source [find interface/ftdi/esp32_devkitj_v1.cfg] 12 | set ESP32_FLASH_VOLTAGE 3.3 13 | # Source the ESP32 configuration file 14 | source [find target/esp32.cfg] 15 | -------------------------------------------------------------------------------- /examples/WiFi/FTPClient_UploadImage/debug_custom.json: -------------------------------------------------------------------------------- 1 | { 2 | "name":"Arduino on ESP32", 3 | "toolchainPrefix":"xtensa-esp32-elf", 4 | "svdFile":"debug.svd", 5 | "request":"attach", 6 | "postAttachCommands":[ 7 | "set remote hardware-watchpoint-limit 2", 8 | "monitor reset halt", 9 | "monitor gdb_sync", 10 | "thb setup", 11 | "c" 12 | ], 13 | "overrideRestartCommands":[ 14 | "monitor reset halt", 15 | "monitor gdb_sync", 16 | "thb setup", 17 | "c" 18 | ] 19 | } -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.cpp: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.cpp 3 | FTP Client for Generic boards using SD, FS, etc. 4 | 5 | Based on and modified from 6 | 7 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 8 | 9 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 10 | *****************************************************************************************************************************/ 11 | 12 | // To demo how to include files in multi-file Projects 13 | 14 | #include "multiFileProject.h" 15 | -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.h 3 | FTP Client for Generic boards using SD, FS, etc. 4 | 5 | Based on and modified from 6 | 7 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 8 | 9 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 10 | *****************************************************************************************************************************/ 11 | 12 | // To demo how to include files in multi-file Projects 13 | 14 | #pragma once 15 | 16 | #define _ETHERNET_WEBSERVER_LOGLEVEL_ 1 17 | 18 | // Can be included as many times as necessary, without `Multiple Definitions` Linker Error 19 | #include // https://github.com/khoih-prog/FTPClient_Generic 20 | -------------------------------------------------------------------------------- /examples/multiFileProject/multiFileProject.ino: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | multiFileProject.ino 3 | FTP Client for Generic boards using SD, FS, etc. 4 | 5 | Based on and modified from 6 | 7 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 8 | 9 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 10 | *****************************************************************************************************************************/ 11 | 12 | // To demo how to include files in multi-file Projects 13 | 14 | #define FTPCLIENT_GENERIC_VERSION_MIN_TARGET "EthernetWebServer v1.0.0" 15 | #define FTPCLIENT_GENERIC_VERSION_MIN 1000000 16 | 17 | #include "multiFileProject.h" 18 | 19 | // To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error 20 | #include // https://github.com/khoih-prog/FTPClient_Generic 21 | 22 | void setup() 23 | { 24 | Serial.begin(115200); 25 | 26 | while (!Serial && millis() < 5000); 27 | 28 | delay(500); 29 | 30 | Serial.println("\nStart multiFileProject"); 31 | Serial.println(FTPCLIENT_GENERIC_VERSION); 32 | 33 | #if defined(FTPCLIENT_GENERIC_VERSION_MIN) 34 | 35 | if (FTPCLIENT_GENERIC_VERSION_INT < FTPCLIENT_GENERIC_VERSION_MIN) 36 | { 37 | Serial.print("Warning. Must use this example on Version equal or later than : "); 38 | Serial.println(FTPCLIENT_GENERIC_VERSION_MIN_TARGET); 39 | } 40 | 41 | #endif 42 | 43 | Serial.print("You're OK now"); 44 | } 45 | 46 | void loop() 47 | { 48 | // put your main code here, to run repeatedly: 49 | } 50 | -------------------------------------------------------------------------------- /keywords.txt: -------------------------------------------------------------------------------- 1 | ####################################### 2 | # Datatypes (KEYWORD1) 3 | ####################################### 4 | 5 | ####################### 6 | # FTPClient_Generic 7 | ####################### 8 | 9 | FTPClient_Generic KEYWORD1 10 | 11 | ####################### 12 | # FTPClient_Generic 13 | ####################### 14 | 15 | OpenConnection KEYWORD2 16 | CloseConnection KEYWORD2 17 | bool isConnected KEYWORD2 18 | NewFile KEYWORD2 19 | AppendFile KEYWORD2 20 | WriteData KEYWORD2 21 | CloseFile KEYWORD2 22 | GetFTPAnswer KEYWORD2 23 | GetLastModifiedTime KEYWORD2 24 | RenameFile KEYWORD2 25 | Write KEYWORD2 26 | InitFile KEYWORD2 27 | ChangeWorkDir KEYWORD2 28 | DeleteFile KEYWORD2 29 | MakeDir KEYWORD2 30 | RemoveDir KEYWORD2 31 | ContentList KEYWORD2 32 | ContentListWithListCommand KEYWORD2 33 | DownloadString KEYWORD2 34 | DownloadFile KEYWORD2 35 | 36 | 37 | ####################################### 38 | # Constants (LITERAL1) 39 | ####################################### 40 | 41 | FTPCLIENT_GENERIC_VERSION LITERAL1 42 | FTPCLIENT_GENERIC_VERSION_MAJOR LITERAL1 43 | FTPCLIENT_GENERIC_VERSION_MINOR LITERAL1 44 | FTPCLIENT_GENERIC_VERSION_PATCH LITERAL1 45 | FTPCLIENT_GENERIC_VERSION_INT LITERAL1 46 | 47 | ####################################### 48 | 49 | BUFFER_SIZE LITERAL1 50 | TIMEOUT_MS LITERAL1 51 | 52 | FTP_PORT LITERAL1 53 | 54 | ####################################### 55 | 56 | COMMAND_QUIT LITERAL1 57 | COMMAND_USER LITERAL1 58 | COMMAND_PASS LITERAL1 59 | 60 | COMMAND_RENAME_FILE_FROM LITERAL1 61 | COMMAND_RENAME_FILE_TO LITERAL1 62 | 63 | COMMAND_FILE_LAST_MOD_TIME LITERAL1 64 | 65 | COMMAND_APPEND_FILE LITERAL1 66 | COMMAND_DELETE_FILE LITERAL1 67 | 68 | COMMAND_CURRENT_WORKING_DIR LITERAL1 69 | COMMAND_MAKE_DIR LITERAL1 70 | COMMAND_REMOVE_DIR LITERAL1 71 | COMMAND_LIST_DIR_STANDARD LITERAL1 72 | COMMAND_LIST_DIR LITERAL1 73 | 74 | COMMAND_DOWNLOAD LITERAL1 75 | COMMAND_FILE_UPLOAD LITERAL1 76 | 77 | COMMAND_PASSIVE_MODE LITERAL1 78 | 79 | COMMAND_XFER_TYPE_ASCII LITERAL1 80 | COMMAND_XFER_TYPE_BINARY LITERAL1 81 | 82 | ####################################### 83 | 84 | ENTERING_PASSIVE_MODE LITERAL1 85 | 86 | 87 | 88 | -------------------------------------------------------------------------------- /library.json: -------------------------------------------------------------------------------- 1 | { 2 | "name": "FTPClient_Generic", 3 | "version": "1.6.0", 4 | "description": "FTP Client for Generic boards such as AVR Mega, megaAVR, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RP2040W, etc.), ESP32/ESP8266 using Ethernet. FTP Client can use WiFi (ESP_WiFi, Portenta_H7 WiFi, WiFiNINA, WiFi101, RP2040W, U-Blox W101, W102, ESP8266/ESP32-AT), Ethernet W5100, W5100S, W5200, W5500, W6100, ENC28J60, Portenta_H7 Ethernet or Teensy 4.1 NativeEthernet/QNEthernet. Now supporting other new FTP Servers, such as `vsftpd` in Linux, Ubuntu, Rasbberry Pi, etc. and ESP32/ESP8266 using Ethernet W5x00 or ENC28J60", 5 | "keywords": "communication, data, ftp, ftp-client, wifi, WiFiNINA, ethernet, teensy, teensy41, qnethernet, native-ethernet, w5x00, w6100, ethernet-generic, portenta-h7, rp2040, SAM-DUE, SAMD, STM32, nRF52, mega-avr", 6 | "authors": [ 7 | { 8 | "name": "Leonardo Bispo", 9 | "url": "https://github.com/ldab" 10 | }, 11 | { 12 | "name": "Khoi Hoang", 13 | "url": "https://github.com/khoih-prog", 14 | "email": "khoih.prog@gmail.com", 15 | "maintainer": true 16 | } 17 | ], 18 | "repository": 19 | { 20 | "type": "git", 21 | "url": "https://github.com/khoih-prog/FTPClient_Generic.git" 22 | }, 23 | "dependencies": 24 | [ 25 | { 26 | "owner": "khoih-prog", 27 | "name": "Functional-Vlpp", 28 | "version": "^1.0.2" 29 | }, 30 | { 31 | "owner": "khoih-prog", 32 | "name": "Ethernet_Generic", 33 | "version": "^2.8.1" 34 | }, 35 | { 36 | "owner": "ssilverman", 37 | "name": "QNEthernet", 38 | "version": ">=0.17.0", 39 | "platforms": ["teensy"] 40 | }, 41 | { 42 | "owner": "stm32duino", 43 | "name": "STM32duino LwIP", 44 | "version": "^2.1.2", 45 | "platforms": "ststm32" 46 | }, 47 | { 48 | "owner": "stm32duino", 49 | "name": "STM32Ethernet", 50 | "version": "^1.3.0", 51 | "platforms": "ststm32" 52 | }, 53 | { 54 | "owner": "khoih-prog", 55 | "name": "WiFiNINA_Generic", 56 | "version": ">=1.8.15-1", 57 | "platforms": ["*"] 58 | }, 59 | { 60 | "owner": "khoih-prog", 61 | "name": "WiFiMulti_Generic", 62 | "version": ">=1.2.2", 63 | "platforms": ["*"] 64 | }, 65 | { 66 | "owner": "khoih-prog", 67 | "name": "ESP_AT_Lib", 68 | "version": ">=1.5.1", 69 | "platforms": ["*"] 70 | }, 71 | { 72 | "owner": "khoih-prog", 73 | "name": "WiFi101_Generic", 74 | "version": ">=1.0.0", 75 | "platforms": ["*"] 76 | }, 77 | { 78 | "owner": "jandrassy", 79 | "name": "WiFiEspAT", 80 | "version": ">=1.4.1", 81 | "platforms": ["*"] 82 | } 83 | ], 84 | "homepage": "https://github.com/khoih-prog/FTPClient_Generic", 85 | "export": { 86 | "exclude": [ 87 | "linux", 88 | "extras", 89 | "tests" 90 | ] 91 | }, 92 | "license": "MIT", 93 | "frameworks": "*", 94 | "platforms": "*", 95 | "examples": "examples/*/*/*.ino", 96 | "headers": ["FTPClient_Generic.h", "FTPClient_Generic.hpp"] 97 | } 98 | 99 | -------------------------------------------------------------------------------- /library.properties: -------------------------------------------------------------------------------- 1 | name=FTPClient_Generic 2 | version=1.6.0 3 | author=Leonardo Bispo , Khoi Hoang 4 | maintainer=Khoi Hoang 5 | license=MIT 6 | sentence=FTP Client for Generic boards such as AVR Mega, megaAVR, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RP2040W, etc.), ESP32/ESP8266 using Ethernet 7 | paragraph=FTP Client can use WiFi (ESP_WiFi, Portenta_H7 WiFi, WiFiNINA, WiFi101, RP2040W, U-Blox W101, W102, ESP8266/ESP32-AT), Ethernet W5100, W5100S, W5200, W5500, W6100, ENC28J60, Portenta_H7 Ethernet or Teensy 4.1 NativeEthernet/QNEthernet. Now supporting other new FTP Servers, such as `vsftpd` in Linux, Ubuntu, Rasbberry Pi, etc. and ESP32/ESP8266 using Ethernet W5500, W6100 or ENC28J60 8 | category=Communication 9 | url=https://github.com/khoih-prog/FTPClient_Generic 10 | architectures=* 11 | depends=Functional-Vlpp, WiFiNINA_Generic, ESP_AT_Lib, WiFiEspAT, WiFiMulti_Generic, Ethernet_Generic, STM32duino LwIP, STM32duino STM32Ethernet, QNEthernet 12 | includes=FTPClient_Generic.h, FTPClient_Generic.hpp 13 | -------------------------------------------------------------------------------- /src/FTPClient_Generic.h: -------------------------------------------------------------------------------- 1 | /**************************************************************************************************************************** 2 | FTPClient_Generic.h 3 | 4 | FTP Client for Generic boards using SD, FS, etc. 5 | 6 | Based on and modified from 7 | 8 | 1) esp32_ftpclient Library https://github.com/ldab/ESP32_FTPClient 9 | 10 | Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic 11 | 12 | Version: 1.6.0 13 | 14 | Version Modified By Date Comments 15 | ------- ----------- ---------- ----------- 16 | 1.0.0 K Hoang 11/05/2022 Initial porting and coding to support many more boards, using WiFi or Ethernet 17 | 1.1.0 K Hoang 13/05/2022 Add support to Teensy 4.1 using QNEthernet or NativeEthernet 18 | 1.2.0 K Hoang 14/05/2022 Add support to other FTP Servers. Fix bug 19 | 1.2.1 K Hoang 14/05/2022 Auto detect server response type in PASV mode 20 | 1.3.0 K Hoang 16/05/2022 Fix uploading issue of large files for WiFi, QNEthernet 21 | 1.4.0 K Hoang 05/11/2022 Add support to ESP32/ESP8266 using Ethernet W5x00 or ENC28J60 22 | 1.5.0 K Hoang 20/01/2023 Add support to RP2040W using `arduino-pico` core 23 | 1.5.0 K Hoang 20/01/2023 Add support to Ethernet W6100 using Ethernet_Generic library 24 | *****************************************************************************************************************************/ 25 | 26 | #pragma once 27 | 28 | #ifndef FTPCLIENT_GENERIC_H 29 | #define FTPCLIENT_GENERIC_H 30 | 31 | ///////////////////////////////////////////////////////// 32 | 33 | #define FTPCLIENT_GENERIC_VERSION "FTPCLIENT_GENERIC v1.6.0" 34 | 35 | #define FTPCLIENT_GENERIC_VERSION_MAJOR 1 36 | #define FTPCLIENT_GENERIC_VERSION_MINOR 6 37 | #define FTPCLIENT_GENERIC_VERSION_PATCH 0 38 | 39 | #define FTPCLIENT_GENERIC_VERSION_INT 1006000 40 | 41 | ///////////////////////////////////////////////////////// 42 | 43 | #include "FTPClient_Generic.hpp" 44 | #include "FTPClient_Generic_Impl.h" 45 | 46 | ///////////////////////////////////////////////////////// 47 | 48 | #endif // FTPCLIENT_GENERIC_H 49 | -------------------------------------------------------------------------------- /utils/astyle_library.conf: -------------------------------------------------------------------------------- 1 | # Code formatting rules for Arduino libraries, modified from for KH libraries: 2 | # 3 | # https://github.com/arduino/Arduino/blob/master/build/shared/examples_formatter.conf 4 | # 5 | 6 | # astyle --style=allman -s2 -t2 -C -S -xW -Y -M120 -f -p -xg -H -xb -c --xC120 -xL *.h *.cpp *.ino 7 | 8 | --mode=c 9 | --lineend=linux 10 | --style=allman 11 | 12 | # -r or -R 13 | #--recursive 14 | 15 | # -c => Converts tabs into spaces 16 | convert-tabs 17 | 18 | # -s2 => 2 spaces indentation 19 | --indent=spaces=2 20 | 21 | # -t2 => tab =2 spaces 22 | #--indent=tab=2 23 | 24 | # -C 25 | --indent-classes 26 | 27 | # -S 28 | --indent-switches 29 | 30 | # -xW 31 | --indent-preproc-block 32 | 33 | # -Y => indent classes, switches (and cases), comments starting at column 1 34 | --indent-col1-comments 35 | 36 | # -M120 => maximum of 120 spaces to indent a continuation line 37 | --max-continuation-indent=120 38 | 39 | # -xC120 => max‑code‑length will break a line if the code exceeds # characters 40 | --max-code-length=120 41 | 42 | # -f => 43 | --break-blocks 44 | 45 | # -p => put a space around operators 46 | --pad-oper 47 | 48 | # -xg => Insert space padding after commas 49 | --pad-comma 50 | 51 | # -H => put a space after if/for/while 52 | pad-header 53 | 54 | # -xb => Break one line headers (e.g. if/for/while) 55 | --break-one-line-headers 56 | 57 | # -c => Converts tabs into spaces 58 | #--convert-tabs 59 | 60 | # if you like one-liners, keep them 61 | #keep-one-line-statements 62 | 63 | # -xV 64 | --attach-closing-while 65 | 66 | #unpad-paren 67 | 68 | # -xp 69 | remove-comment-prefix 70 | 71 | -------------------------------------------------------------------------------- /utils/restyle.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | for dir in . ; do 4 | find $dir -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.ino" \) -exec astyle --suffix=none --options=./utils/astyle_library.conf \{\} \; 5 | done 6 | 7 | --------------------------------------------------------------------------------