├── DXF ├── bed-siliconeheater.dxf ├── frame-enclosure_base-back.dxf ├── frame-enclosure_base-bottom.dxf ├── frame-enclosure_base-front.dxf ├── frame-enclosure_base-side.dxf ├── frame-enclosure_base-top.dxf ├── frame-enclosure_chamber-back.dxf ├── frame-enclosure_chamber-door-left.dxf ├── frame-enclosure_chamber-door-right.dxf ├── frame-enclosure_chamber-side.dxf └── frame-enclosure_chamber-top.dxf ├── LICENSE ├── README.md ├── STL ├── 10___extruder-idler_left-front.stl ├── 12___pcb-mount_beagleboneblack-left.stl ├── 13___frame-enclosure-door-handle.stl ├── 14___frame-small-mount.stl ├── 16___frame-corner_door-bottom-right.stl ├── 17___belt-tensioner_y-right_x.stl ├── 18___air-filter_activatedcarbon-container-lid.stl ├── 20___air-filter_activatedcarbon-container.stl ├── 22___extruder-front.stl ├── 23___z-end_top.stl ├── 24___z-end_bottom.stl ├── 25___pcb-mount_rumba-left.stl ├── 264___filament-feed.stl ├── 268___y-endstop-magnet-mount.stl ├── 26___z-bed-mount.stl ├── 275___frame-enclosure-cable-feedthrough_10.stl ├── 277___frame-enclosure-cable-feedthrough_20.stl ├── 27___spool-mount-endcap.stl ├── 289___led-mount_left.stl ├── 290___led-mount_right.stl ├── 29___controller-ethernet-coupling-panel.stl ├── 2___y-motor-mount.stl ├── 307___y-arbor-support_top.stl ├── 308___y-arbor-support_bottom.stl ├── 31___y-end_back-left.stl ├── 334___bed-corner_front-left_back-right.stl ├── 335___bed-corner_front-right_back-left.stl ├── 33___z-motor-mount.stl ├── 34___frame-corner_middle-back.stl ├── 351___bed-leveling-mount.stl ├── 35___frame-corner_top-back_bottom.stl ├── 38___extruder-back.stl ├── 39___z-elevator.stl ├── 3___extruder-idler_right-front.stl ├── 408___wiper.stl ├── 40___frame-corner_top-front-left.stl ├── 41___air-filter_fan-duct.stl ├── 42___cablechain-mount-y-frame_front.stl ├── 44___pcb-mount_rumba-right.stl ├── 45___y-end_front-left.stl ├── 46___frame-enclosure-angle.stl ├── 48___frame-corner_middle-front-right.stl ├── 51___x-end_idler.stl ├── 53___air-heater-bottom.stl ├── 55___extruder-idler_right-back.stl ├── 56___cablechain-mount-y-frame_back.stl ├── 57___y-end_front-right.stl ├── 59___x-end_idler-shaft.stl ├── 60___frame-corner_door-top-left.stl ├── 62___extruder-idler_left-back.stl ├── 65___pulley_x-idler_y-idler.stl ├── 66___air-heater-top.stl ├── 6___pcb-mount_beagleboneblack-right.stl ├── 70___frame-corner_door-top-right.stl ├── 71___y-end_back-right.stl ├── 72___x-carriage.stl ├── 74___frame-corner_door-bottom-left.stl ├── 75___belt-tensioner_y-left.stl ├── 76___x-end_motor.stl ├── 78___frame-corner_top-front-right.stl ├── 8___frame-corner_middle-front-left.stl ├── extruder-flexible-filament-adapter_left.stl └── extruder-flexible-filament-adapter_right.stl ├── air-filter.scad ├── air-heater-bottom.scad ├── air-heater-top.scad ├── bed-corner.scad ├── bed-heatbed.scad ├── bed-leveling-mount.scad ├── bed-siliconeheater.scad ├── belt-tensioner.scad ├── cablechain-mount-y-frame.scad ├── configuration.scad ├── controller-ethernet-coupling-panel.scad ├── extruder-back.scad ├── extruder-back_single.scad ├── extruder-flexible-filament-adapter.scad ├── extruder-front.scad ├── extruder-front_single.scad ├── extruder-idler.scad ├── filament-feed.scad ├── frame-corner.scad ├── frame-enclosure-angle.scad ├── frame-enclosure-cable-feedthrough.scad ├── frame-enclosure-door-handle.scad ├── frame-enclosure.scad ├── frame-small-mount.scad ├── functions.scad ├── led-mount.scad ├── lib ├── 0.dxf ├── 1.dxf ├── 2.dxf ├── 5.dxf ├── 6.dxf ├── 8.dxf ├── B.dxf ├── F.dxf ├── L.dxf ├── R.dxf ├── T.dxf ├── X.dxf ├── Y.dxf └── Z.dxf ├── pcb-mount.scad ├── pulley.scad ├── spool-mount-endcap.scad ├── wiper.scad ├── x-carriage.scad ├── x-end.scad ├── y-arbor-support.scad ├── y-end.scad ├── y-endstop-magnet-mount.scad ├── y-motor-mount.scad ├── z-bed-mount.scad ├── z-elevator.scad ├── z-end.scad └── z-motor-mount.scad /DXF/bed-siliconeheater.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/bed-siliconeheater.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_base-back.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_base-back.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_base-bottom.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_base-bottom.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_base-front.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_base-front.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_base-side.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_base-side.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_base-top.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_base-top.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_chamber-back.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_chamber-back.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_chamber-door-left.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_chamber-door-left.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_chamber-door-right.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_chamber-door-right.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_chamber-side.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_chamber-side.dxf -------------------------------------------------------------------------------- /DXF/frame-enclosure_chamber-top.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/DXF/frame-enclosure_chamber-top.dxf -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/LICENSE -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/README.md -------------------------------------------------------------------------------- /STL/10___extruder-idler_left-front.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/10___extruder-idler_left-front.stl -------------------------------------------------------------------------------- /STL/12___pcb-mount_beagleboneblack-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/12___pcb-mount_beagleboneblack-left.stl -------------------------------------------------------------------------------- /STL/13___frame-enclosure-door-handle.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/13___frame-enclosure-door-handle.stl -------------------------------------------------------------------------------- /STL/14___frame-small-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/14___frame-small-mount.stl -------------------------------------------------------------------------------- /STL/16___frame-corner_door-bottom-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/16___frame-corner_door-bottom-right.stl -------------------------------------------------------------------------------- /STL/17___belt-tensioner_y-right_x.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/17___belt-tensioner_y-right_x.stl -------------------------------------------------------------------------------- /STL/18___air-filter_activatedcarbon-container-lid.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/18___air-filter_activatedcarbon-container-lid.stl -------------------------------------------------------------------------------- /STL/20___air-filter_activatedcarbon-container.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/20___air-filter_activatedcarbon-container.stl -------------------------------------------------------------------------------- /STL/22___extruder-front.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/22___extruder-front.stl -------------------------------------------------------------------------------- /STL/23___z-end_top.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/23___z-end_top.stl -------------------------------------------------------------------------------- /STL/24___z-end_bottom.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/24___z-end_bottom.stl -------------------------------------------------------------------------------- /STL/25___pcb-mount_rumba-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/25___pcb-mount_rumba-left.stl -------------------------------------------------------------------------------- /STL/264___filament-feed.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/264___filament-feed.stl -------------------------------------------------------------------------------- /STL/268___y-endstop-magnet-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/268___y-endstop-magnet-mount.stl -------------------------------------------------------------------------------- /STL/26___z-bed-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/26___z-bed-mount.stl -------------------------------------------------------------------------------- /STL/275___frame-enclosure-cable-feedthrough_10.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/275___frame-enclosure-cable-feedthrough_10.stl -------------------------------------------------------------------------------- /STL/277___frame-enclosure-cable-feedthrough_20.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/277___frame-enclosure-cable-feedthrough_20.stl -------------------------------------------------------------------------------- /STL/27___spool-mount-endcap.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/27___spool-mount-endcap.stl -------------------------------------------------------------------------------- /STL/289___led-mount_left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/289___led-mount_left.stl -------------------------------------------------------------------------------- /STL/290___led-mount_right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/290___led-mount_right.stl -------------------------------------------------------------------------------- /STL/29___controller-ethernet-coupling-panel.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/29___controller-ethernet-coupling-panel.stl -------------------------------------------------------------------------------- /STL/2___y-motor-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/2___y-motor-mount.stl -------------------------------------------------------------------------------- /STL/307___y-arbor-support_top.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/307___y-arbor-support_top.stl -------------------------------------------------------------------------------- /STL/308___y-arbor-support_bottom.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/308___y-arbor-support_bottom.stl -------------------------------------------------------------------------------- /STL/31___y-end_back-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/31___y-end_back-left.stl -------------------------------------------------------------------------------- /STL/334___bed-corner_front-left_back-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/334___bed-corner_front-left_back-right.stl -------------------------------------------------------------------------------- /STL/335___bed-corner_front-right_back-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/335___bed-corner_front-right_back-left.stl -------------------------------------------------------------------------------- /STL/33___z-motor-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/33___z-motor-mount.stl -------------------------------------------------------------------------------- /STL/34___frame-corner_middle-back.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/34___frame-corner_middle-back.stl -------------------------------------------------------------------------------- /STL/351___bed-leveling-mount.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/351___bed-leveling-mount.stl -------------------------------------------------------------------------------- /STL/35___frame-corner_top-back_bottom.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/35___frame-corner_top-back_bottom.stl -------------------------------------------------------------------------------- /STL/38___extruder-back.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/38___extruder-back.stl -------------------------------------------------------------------------------- /STL/39___z-elevator.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/39___z-elevator.stl -------------------------------------------------------------------------------- /STL/3___extruder-idler_right-front.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/3___extruder-idler_right-front.stl -------------------------------------------------------------------------------- /STL/408___wiper.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/408___wiper.stl -------------------------------------------------------------------------------- /STL/40___frame-corner_top-front-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/40___frame-corner_top-front-left.stl -------------------------------------------------------------------------------- /STL/41___air-filter_fan-duct.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/41___air-filter_fan-duct.stl -------------------------------------------------------------------------------- /STL/42___cablechain-mount-y-frame_front.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/42___cablechain-mount-y-frame_front.stl -------------------------------------------------------------------------------- /STL/44___pcb-mount_rumba-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/44___pcb-mount_rumba-right.stl -------------------------------------------------------------------------------- /STL/45___y-end_front-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/45___y-end_front-left.stl -------------------------------------------------------------------------------- /STL/46___frame-enclosure-angle.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/46___frame-enclosure-angle.stl -------------------------------------------------------------------------------- /STL/48___frame-corner_middle-front-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/48___frame-corner_middle-front-right.stl -------------------------------------------------------------------------------- /STL/51___x-end_idler.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/51___x-end_idler.stl -------------------------------------------------------------------------------- /STL/53___air-heater-bottom.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/53___air-heater-bottom.stl -------------------------------------------------------------------------------- /STL/55___extruder-idler_right-back.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/55___extruder-idler_right-back.stl -------------------------------------------------------------------------------- /STL/56___cablechain-mount-y-frame_back.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/56___cablechain-mount-y-frame_back.stl -------------------------------------------------------------------------------- /STL/57___y-end_front-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/57___y-end_front-right.stl -------------------------------------------------------------------------------- /STL/59___x-end_idler-shaft.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/59___x-end_idler-shaft.stl -------------------------------------------------------------------------------- /STL/60___frame-corner_door-top-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/60___frame-corner_door-top-left.stl -------------------------------------------------------------------------------- /STL/62___extruder-idler_left-back.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/62___extruder-idler_left-back.stl -------------------------------------------------------------------------------- /STL/65___pulley_x-idler_y-idler.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/65___pulley_x-idler_y-idler.stl -------------------------------------------------------------------------------- /STL/66___air-heater-top.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/66___air-heater-top.stl -------------------------------------------------------------------------------- /STL/6___pcb-mount_beagleboneblack-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/6___pcb-mount_beagleboneblack-right.stl -------------------------------------------------------------------------------- /STL/70___frame-corner_door-top-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/70___frame-corner_door-top-right.stl -------------------------------------------------------------------------------- /STL/71___y-end_back-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/71___y-end_back-right.stl -------------------------------------------------------------------------------- /STL/72___x-carriage.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/72___x-carriage.stl -------------------------------------------------------------------------------- /STL/74___frame-corner_door-bottom-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/74___frame-corner_door-bottom-left.stl -------------------------------------------------------------------------------- /STL/75___belt-tensioner_y-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/75___belt-tensioner_y-left.stl -------------------------------------------------------------------------------- /STL/76___x-end_motor.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/76___x-end_motor.stl -------------------------------------------------------------------------------- /STL/78___frame-corner_top-front-right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/78___frame-corner_top-front-right.stl -------------------------------------------------------------------------------- /STL/8___frame-corner_middle-front-left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/8___frame-corner_middle-front-left.stl -------------------------------------------------------------------------------- /STL/extruder-flexible-filament-adapter_left.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/extruder-flexible-filament-adapter_left.stl -------------------------------------------------------------------------------- /STL/extruder-flexible-filament-adapter_right.stl: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/STL/extruder-flexible-filament-adapter_right.stl -------------------------------------------------------------------------------- /air-filter.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/air-filter.scad -------------------------------------------------------------------------------- /air-heater-bottom.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/air-heater-bottom.scad -------------------------------------------------------------------------------- /air-heater-top.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/air-heater-top.scad -------------------------------------------------------------------------------- /bed-corner.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/bed-corner.scad -------------------------------------------------------------------------------- /bed-heatbed.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/bed-heatbed.scad -------------------------------------------------------------------------------- /bed-leveling-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/bed-leveling-mount.scad -------------------------------------------------------------------------------- /bed-siliconeheater.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/bed-siliconeheater.scad -------------------------------------------------------------------------------- /belt-tensioner.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/belt-tensioner.scad -------------------------------------------------------------------------------- /cablechain-mount-y-frame.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/cablechain-mount-y-frame.scad -------------------------------------------------------------------------------- /configuration.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/configuration.scad -------------------------------------------------------------------------------- /controller-ethernet-coupling-panel.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/controller-ethernet-coupling-panel.scad -------------------------------------------------------------------------------- /extruder-back.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-back.scad -------------------------------------------------------------------------------- /extruder-back_single.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-back_single.scad -------------------------------------------------------------------------------- /extruder-flexible-filament-adapter.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-flexible-filament-adapter.scad -------------------------------------------------------------------------------- /extruder-front.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-front.scad -------------------------------------------------------------------------------- /extruder-front_single.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-front_single.scad -------------------------------------------------------------------------------- /extruder-idler.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/extruder-idler.scad -------------------------------------------------------------------------------- /filament-feed.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/filament-feed.scad -------------------------------------------------------------------------------- /frame-corner.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-corner.scad -------------------------------------------------------------------------------- /frame-enclosure-angle.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-enclosure-angle.scad -------------------------------------------------------------------------------- /frame-enclosure-cable-feedthrough.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-enclosure-cable-feedthrough.scad -------------------------------------------------------------------------------- /frame-enclosure-door-handle.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-enclosure-door-handle.scad -------------------------------------------------------------------------------- /frame-enclosure.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-enclosure.scad -------------------------------------------------------------------------------- /frame-small-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/frame-small-mount.scad -------------------------------------------------------------------------------- /functions.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/functions.scad -------------------------------------------------------------------------------- /led-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/led-mount.scad -------------------------------------------------------------------------------- /lib/0.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/0.dxf -------------------------------------------------------------------------------- /lib/1.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/1.dxf -------------------------------------------------------------------------------- /lib/2.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/2.dxf -------------------------------------------------------------------------------- /lib/5.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/5.dxf -------------------------------------------------------------------------------- /lib/6.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/6.dxf -------------------------------------------------------------------------------- /lib/8.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/8.dxf -------------------------------------------------------------------------------- /lib/B.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/B.dxf -------------------------------------------------------------------------------- /lib/F.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/F.dxf -------------------------------------------------------------------------------- /lib/L.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/L.dxf -------------------------------------------------------------------------------- /lib/R.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/R.dxf -------------------------------------------------------------------------------- /lib/T.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/T.dxf -------------------------------------------------------------------------------- /lib/X.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/X.dxf -------------------------------------------------------------------------------- /lib/Y.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/Y.dxf -------------------------------------------------------------------------------- /lib/Z.dxf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/lib/Z.dxf -------------------------------------------------------------------------------- /pcb-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/pcb-mount.scad -------------------------------------------------------------------------------- /pulley.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/pulley.scad -------------------------------------------------------------------------------- /spool-mount-endcap.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/spool-mount-endcap.scad -------------------------------------------------------------------------------- /wiper.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/wiper.scad -------------------------------------------------------------------------------- /x-carriage.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/x-carriage.scad -------------------------------------------------------------------------------- /x-end.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/x-end.scad -------------------------------------------------------------------------------- /y-arbor-support.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/y-arbor-support.scad -------------------------------------------------------------------------------- /y-end.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/y-end.scad -------------------------------------------------------------------------------- /y-endstop-magnet-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/y-endstop-magnet-mount.scad -------------------------------------------------------------------------------- /y-motor-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/y-motor-mount.scad -------------------------------------------------------------------------------- /z-bed-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/z-bed-mount.scad -------------------------------------------------------------------------------- /z-elevator.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/z-elevator.scad -------------------------------------------------------------------------------- /z-end.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/z-end.scad -------------------------------------------------------------------------------- /z-motor-mount.scad: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/kuehlingkuehling/RepRap-Industrial/HEAD/z-motor-mount.scad --------------------------------------------------------------------------------