├── Dockerfile
├── README.md
├── php.ini
├── runtime
└── bootstrap
└── src
└── index.php
/Dockerfile:
--------------------------------------------------------------------------------
1 | #Lambda base image Amazon linux
2 | FROM public.ecr.aws/lambda/provided as builder
3 | # Set desired PHP Version
4 | ARG php_version="8.0.2"
5 | RUN yum clean all && \
6 | yum install -y autoconf \
7 | bison \
8 | bzip2-devel \
9 | gcc \
10 | gcc-c++ \
11 | git \
12 | gzip \
13 | libcurl-devel \
14 | libxml2-devel \
15 | make \
16 | openssl-devel \
17 | tar \
18 | unzip \
19 | zip \
20 | re2c \
21 | sqlite-devel \
22 | oniguruma-devel
23 |
24 | # Download the PHP source, compile, and install both PHP and Composer
25 | RUN curl -sL https://github.com/php/php-src/archive/php-${php_version}.tar.gz | tar -xvz && \
26 | cd php-src-php-${php_version} && \
27 | ./buildconf --force && \
28 | ./configure --prefix=/var/lang/ --with-openssl --with-curl --with-zlib --with-pear --enable-bcmath --enable-sockets --with-bz2 --enable-mbstring --with-pdo-mysql --with-mysqli && \
29 | make -j 12 && \
30 | make install && \
31 | /var/lang/bin/php -v && \
32 | curl -sS https://getcomposer.org/installer | /var/lang/bin/php -- --install-dir=/var/lang/bin/ --filename=composer
33 |
34 | RUN printf "yes\nyes\nyes\nyes\n" | /var/lang/bin/pecl install swoole
35 |
36 | # Install Guzzle, prepare vendor files
37 | RUN mkdir /lambda-php-vendor && \
38 | cd /lambda-php-vendor && \
39 | /var/lang/bin/php /var/lang/bin/composer require guzzlehttp/guzzle
40 |
41 |
42 | ###### Create runtime image ######
43 | FROM public.ecr.aws/lambda/provided:al2 as runtime
44 |
45 | RUN yum install -y oniguruma-devel
46 |
47 | # Layer 1: PHP Binaries
48 | COPY --from=builder /var/lang /var/lang
49 |
50 | COPY php.ini /var/lang/lib/php.ini
51 |
52 | # Layer 2: Runtime Interface Client
53 | # Prepare runtime files
54 | COPY runtime/bootstrap /var/runtime
55 | RUN chmod 0755 /var/runtime/bootstrap
56 |
57 | # Layer 3: Vendor
58 | COPY --from=builder /lambda-php-vendor/vendor /opt/vendor
59 |
60 | # You chose your lambda function
61 | # to copy inside the container
62 | COPY src/ /var/task/
63 |
64 | RUN /var/lang/bin/php -v
65 |
66 | CMD [ "index" ]
--------------------------------------------------------------------------------
/README.md:
--------------------------------------------------------------------------------
1 | # PHP8 AWS Lambda Runtime docker image
2 | Repo for the docker image for php8 compiled and runtime for aws lambda serverless
3 |
4 | Create local build
5 | ```bash
6 | docker build . -t php8-aws-lambda
7 | ```
8 |
9 | Create server at port 9000
10 | ```bash
11 | docker run --name aws-lambda -p 9000:8080 php8-aws-lambda
12 | ```
13 |
14 | Simple local test
15 | ```
16 | curl -XGET "http://localhost:9000/2015-03-31/functions/function/invocations"
17 | ```
18 |
19 | To local test with query string params
20 | ```
21 | curl -XPOST "http://localhost:9000/2015-03-31/functions/function/invocations" -d '{"queryStringParameters": {"name":"Leo"}}'
22 | ```
--------------------------------------------------------------------------------
/php.ini:
--------------------------------------------------------------------------------
1 | [PHP]
2 |
3 | ;;;;;;;;;;;;;;;;;;;
4 | ; About php.ini ;
5 | ;;;;;;;;;;;;;;;;;;;
6 | ; PHP's initialization file, generally called php.ini, is responsible for
7 | ; configuring many of the aspects of PHP's behavior.
8 |
9 | ; PHP attempts to find and load this configuration from a number of locations.
10 | ; The following is a summary of its search order:
11 | ; 1. SAPI module specific location.
12 | ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
13 | ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
14 | ; 4. Current working directory (except CLI)
15 | ; 5. The web server's directory (for SAPI modules), or directory of PHP
16 | ; (otherwise in Windows)
17 | ; 6. The directory from the --with-config-file-path compile time option, or the
18 | ; Windows directory (usually C:\windows)
19 | ; See the PHP docs for more specific information.
20 | ; http://php.net/configuration.file
21 |
22 | ; The syntax of the file is extremely simple. Whitespace and lines
23 | ; beginning with a semicolon are silently ignored (as you probably guessed).
24 | ; Section headers (e.g. [Foo]) are also silently ignored, even though
25 | ; they might mean something in the future.
26 |
27 | ; Directives following the section heading [PATH=/www/mysite] only
28 | ; apply to PHP files in the /www/mysite directory. Directives
29 | ; following the section heading [HOST=www.example.com] only apply to
30 | ; PHP files served from www.example.com. Directives set in these
31 | ; special sections cannot be overridden by user-defined INI files or
32 | ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
33 | ; CGI/FastCGI.
34 | ; http://php.net/ini.sections
35 |
36 | ; Directives are specified using the following syntax:
37 | ; directive = value
38 | ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
39 | ; Directives are variables used to configure PHP or PHP extensions.
40 | ; There is no name validation. If PHP can't find an expected
41 | ; directive because it is not set or is mistyped, a default value will be used.
42 |
43 | ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
44 | ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
45 | ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
46 | ; previously set variable or directive (e.g. ${foo})
47 |
48 | ; Expressions in the INI file are limited to bitwise operators and parentheses:
49 | ; | bitwise OR
50 | ; ^ bitwise XOR
51 | ; & bitwise AND
52 | ; ~ bitwise NOT
53 | ; ! boolean NOT
54 |
55 | ; Boolean flags can be turned on using the values 1, On, True or Yes.
56 | ; They can be turned off using the values 0, Off, False or No.
57 |
58 | ; An empty string can be denoted by simply not writing anything after the equal
59 | ; sign, or by using the None keyword:
60 |
61 | ; foo = ; sets foo to an empty string
62 | ; foo = None ; sets foo to an empty string
63 | ; foo = "None" ; sets foo to the string 'None'
64 |
65 | ; If you use constants in your value, and these constants belong to a
66 | ; dynamically loaded extension (either a PHP extension or a Zend extension),
67 | ; you may only use these constants *after* the line that loads the extension.
68 |
69 | ;;;;;;;;;;;;;;;;;;;
70 | ; About this file ;
71 | ;;;;;;;;;;;;;;;;;;;
72 | ; PHP comes packaged with two INI files. One that is recommended to be used
73 | ; in production environments and one that is recommended to be used in
74 | ; development environments.
75 |
76 | ; php.ini-production contains settings which hold security, performance and
77 | ; best practices at its core. But please be aware, these settings may break
78 | ; compatibility with older or less security conscience applications. We
79 | ; recommending using the production ini in production and testing environments.
80 |
81 | ; php.ini-development is very similar to its production variant, except it is
82 | ; much more verbose when it comes to errors. We recommend using the
83 | ; development version only in development environments, as errors shown to
84 | ; application users can inadvertently leak otherwise secure information.
85 |
86 | ; This is the php.ini-production INI file.
87 |
88 | ;;;;;;;;;;;;;;;;;;;
89 | ; Quick Reference ;
90 | ;;;;;;;;;;;;;;;;;;;
91 |
92 | ; The following are all the settings which are different in either the production
93 | ; or development versions of the INIs with respect to PHP's default behavior.
94 | ; Please see the actual settings later in the document for more details as to why
95 | ; we recommend these changes in PHP's behavior.
96 |
97 | ; display_errors
98 | ; Default Value: On
99 | ; Development Value: On
100 | ; Production Value: Off
101 |
102 | ; display_startup_errors
103 | ; Default Value: On
104 | ; Development Value: On
105 | ; Production Value: Off
106 |
107 | ; error_reporting
108 | ; Default Value: E_ALL
109 | ; Development Value: E_ALL
110 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
111 |
112 | ; log_errors
113 | ; Default Value: Off
114 | ; Development Value: On
115 | ; Production Value: On
116 |
117 | ; max_input_time
118 | ; Default Value: -1 (Unlimited)
119 | ; Development Value: 60 (60 seconds)
120 | ; Production Value: 60 (60 seconds)
121 |
122 | ; output_buffering
123 | ; Default Value: Off
124 | ; Development Value: 4096
125 | ; Production Value: 4096
126 |
127 | ; register_argc_argv
128 | ; Default Value: On
129 | ; Development Value: Off
130 | ; Production Value: Off
131 |
132 | ; request_order
133 | ; Default Value: None
134 | ; Development Value: "GP"
135 | ; Production Value: "GP"
136 |
137 | ; session.gc_divisor
138 | ; Default Value: 100
139 | ; Development Value: 1000
140 | ; Production Value: 1000
141 |
142 | ; session.sid_bits_per_character
143 | ; Default Value: 4
144 | ; Development Value: 5
145 | ; Production Value: 5
146 |
147 | ; short_open_tag
148 | ; Default Value: On
149 | ; Development Value: Off
150 | ; Production Value: Off
151 |
152 | ; variables_order
153 | ; Default Value: "EGPCS"
154 | ; Development Value: "GPCS"
155 | ; Production Value: "GPCS"
156 |
157 | ; zend.exception_ignore_args
158 | ; Default Value: Off
159 | ; Development Value: Off
160 | ; Production Value: On
161 |
162 | ; zend.exception_string_param_max_len
163 | ; Default Value: 15
164 | ; Development Value: 15
165 | ; Production Value: 0
166 |
167 | ;;;;;;;;;;;;;;;;;;;;
168 | ; php.ini Options ;
169 | ;;;;;;;;;;;;;;;;;;;;
170 | ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
171 | ;user_ini.filename = ".user.ini"
172 |
173 | ; To disable this feature set this option to an empty value
174 | ;user_ini.filename =
175 |
176 | ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
177 | ;user_ini.cache_ttl = 300
178 |
179 | ;;;;;;;;;;;;;;;;;;;;
180 | ; Language Options ;
181 | ;;;;;;;;;;;;;;;;;;;;
182 |
183 | ; Enable the PHP scripting language engine under Apache.
184 | ; http://php.net/engine
185 | engine = On
186 |
187 | ; This directive determines whether or not PHP will recognize code between
188 | ; tags as PHP source which should be processed as such. It is
189 | ; generally recommended that should be used and that this feature
190 | ; should be disabled, as enabling it may result in issues when generating XML
191 | ; documents, however this remains supported for backward compatibility reasons.
192 | ; Note that this directive does not control the would work.
332 | ; http://php.net/syntax-highlighting
333 | ;highlight.string = #DD0000
334 | ;highlight.comment = #FF9900
335 | ;highlight.keyword = #007700
336 | ;highlight.default = #0000BB
337 | ;highlight.html = #000000
338 |
339 | ; If enabled, the request will be allowed to complete even if the user aborts
340 | ; the request. Consider enabling it if executing long requests, which may end up
341 | ; being interrupted by the user or a browser timing out. PHP's default behavior
342 | ; is to disable this feature.
343 | ; http://php.net/ignore-user-abort
344 | ;ignore_user_abort = On
345 |
346 | ; Determines the size of the realpath cache to be used by PHP. This value should
347 | ; be increased on systems where PHP opens many files to reflect the quantity of
348 | ; the file operations performed.
349 | ; Note: if open_basedir is set, the cache is disabled
350 | ; http://php.net/realpath-cache-size
351 | ;realpath_cache_size = 4096k
352 |
353 | ; Duration of time, in seconds for which to cache realpath information for a given
354 | ; file or directory. For systems with rarely changing files, consider increasing this
355 | ; value.
356 | ; http://php.net/realpath-cache-ttl
357 | ;realpath_cache_ttl = 120
358 |
359 | ; Enables or disables the circular reference collector.
360 | ; http://php.net/zend.enable-gc
361 | zend.enable_gc = On
362 |
363 | ; If enabled, scripts may be written in encodings that are incompatible with
364 | ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
365 | ; encodings. To use this feature, mbstring extension must be enabled.
366 | ;zend.multibyte = Off
367 |
368 | ; Allows to set the default encoding for the scripts. This value will be used
369 | ; unless "declare(encoding=...)" directive appears at the top of the script.
370 | ; Only affects if zend.multibyte is set.
371 | ;zend.script_encoding =
372 |
373 | ; Allows to include or exclude arguments from stack traces generated for exceptions.
374 | ; In production, it is recommended to turn this setting on to prohibit the output
375 | ; of sensitive information in stack traces
376 | ; Default Value: Off
377 | ; Development Value: Off
378 | ; Production Value: On
379 | zend.exception_ignore_args = On
380 |
381 | ; Allows setting the maximum string length in an argument of a stringified stack trace
382 | ; to a value between 0 and 1000000.
383 | ; This has no effect when zend.exception_ignore_args is enabled.
384 | ; Default Value: 15
385 | ; Development Value: 15
386 | ; Production Value: 0
387 | ; In production, it is recommended to set this to 0 to reduce the output
388 | ; of sensitive information in stack traces.
389 | zend.exception_string_param_max_len = 0
390 |
391 | ;;;;;;;;;;;;;;;;;
392 | ; Miscellaneous ;
393 | ;;;;;;;;;;;;;;;;;
394 |
395 | ; Decides whether PHP may expose the fact that it is installed on the server
396 | ; (e.g. by adding its signature to the Web server header). It is no security
397 | ; threat in any way, but it makes it possible to determine whether you use PHP
398 | ; on your server or not.
399 | ; http://php.net/expose-php
400 | expose_php = Off
401 |
402 | ;;;;;;;;;;;;;;;;;;;
403 | ; Resource Limits ;
404 | ;;;;;;;;;;;;;;;;;;;
405 |
406 | ; Maximum execution time of each script, in seconds
407 | ; http://php.net/max-execution-time
408 | ; Note: This directive is hardcoded to 0 for the CLI SAPI
409 | max_execution_time = 30
410 |
411 | ; Maximum amount of time each script may spend parsing request data. It's a good
412 | ; idea to limit this time on productions servers in order to eliminate unexpectedly
413 | ; long running scripts.
414 | ; Note: This directive is hardcoded to -1 for the CLI SAPI
415 | ; Default Value: -1 (Unlimited)
416 | ; Development Value: 60 (60 seconds)
417 | ; Production Value: 60 (60 seconds)
418 | ; http://php.net/max-input-time
419 | max_input_time = 60
420 |
421 | ; Maximum input variable nesting level
422 | ; http://php.net/max-input-nesting-level
423 | ;max_input_nesting_level = 64
424 |
425 | ; How many GET/POST/COOKIE input variables may be accepted
426 | ;max_input_vars = 1000
427 |
428 | ; Maximum amount of memory a script may consume
429 | ; http://php.net/memory-limit
430 | memory_limit = 512M
431 |
432 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
433 | ; Error handling and logging ;
434 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
435 |
436 | ; This directive informs PHP of which errors, warnings and notices you would like
437 | ; it to take action for. The recommended way of setting values for this
438 | ; directive is through the use of the error level constants and bitwise
439 | ; operators. The error level constants are below here for convenience as well as
440 | ; some common settings and their meanings.
441 | ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
442 | ; those related to E_NOTICE and E_STRICT, which together cover best practices and
443 | ; recommended coding standards in PHP. For performance reasons, this is the
444 | ; recommend error reporting setting. Your production server shouldn't be wasting
445 | ; resources complaining about best practices and coding standards. That's what
446 | ; development servers and development settings are for.
447 | ; Note: The php.ini-development file has this setting as E_ALL. This
448 | ; means it pretty much reports everything which is exactly what you want during
449 | ; development and early testing.
450 | ;
451 | ; Error Level Constants:
452 | ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
453 | ; E_ERROR - fatal run-time errors
454 | ; E_RECOVERABLE_ERROR - almost fatal run-time errors
455 | ; E_WARNING - run-time warnings (non-fatal errors)
456 | ; E_PARSE - compile-time parse errors
457 | ; E_NOTICE - run-time notices (these are warnings which often result
458 | ; from a bug in your code, but it's possible that it was
459 | ; intentional (e.g., using an uninitialized variable and
460 | ; relying on the fact it is automatically initialized to an
461 | ; empty string)
462 | ; E_STRICT - run-time notices, enable to have PHP suggest changes
463 | ; to your code which will ensure the best interoperability
464 | ; and forward compatibility of your code
465 | ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
466 | ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
467 | ; initial startup
468 | ; E_COMPILE_ERROR - fatal compile-time errors
469 | ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
470 | ; E_USER_ERROR - user-generated error message
471 | ; E_USER_WARNING - user-generated warning message
472 | ; E_USER_NOTICE - user-generated notice message
473 | ; E_DEPRECATED - warn about code that will not work in future versions
474 | ; of PHP
475 | ; E_USER_DEPRECATED - user-generated deprecation warnings
476 | ;
477 | ; Common Values:
478 | ; E_ALL (Show all errors, warnings and notices including coding standards.)
479 | ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
480 | ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
481 | ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
482 | ; Default Value: E_ALL
483 | ; Development Value: E_ALL
484 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
485 | ; http://php.net/error-reporting
486 | error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
487 |
488 | ; This directive controls whether or not and where PHP will output errors,
489 | ; notices and warnings too. Error output is very useful during development, but
490 | ; it could be very dangerous in production environments. Depending on the code
491 | ; which is triggering the error, sensitive information could potentially leak
492 | ; out of your application such as database usernames and passwords or worse.
493 | ; For production environments, we recommend logging errors rather than
494 | ; sending them to STDOUT.
495 | ; Possible Values:
496 | ; Off = Do not display any errors
497 | ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
498 | ; On or stdout = Display errors to STDOUT
499 | ; Default Value: On
500 | ; Development Value: On
501 | ; Production Value: Off
502 | ; http://php.net/display-errors
503 | display_errors = Off
504 |
505 | ; The display of errors which occur during PHP's startup sequence are handled
506 | ; separately from display_errors. We strongly recommend you set this to 'off'
507 | ; for production servers to avoid leaking configuration details.
508 | ; Default Value: On
509 | ; Development Value: On
510 | ; Production Value: Off
511 | ; http://php.net/display-startup-errors
512 | display_startup_errors = Off
513 |
514 | ; Besides displaying errors, PHP can also log errors to locations such as a
515 | ; server-specific log, STDERR, or a location specified by the error_log
516 | ; directive found below. While errors should not be displayed on productions
517 | ; servers they should still be monitored and logging is a great way to do that.
518 | ; Default Value: Off
519 | ; Development Value: On
520 | ; Production Value: On
521 | ; http://php.net/log-errors
522 | log_errors = On
523 |
524 | ; Set maximum length of log_errors. In error_log information about the source is
525 | ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
526 | ; http://php.net/log-errors-max-len
527 | log_errors_max_len = 1024
528 |
529 | ; Do not log repeated messages. Repeated errors must occur in same file on same
530 | ; line unless ignore_repeated_source is set true.
531 | ; http://php.net/ignore-repeated-errors
532 | ignore_repeated_errors = Off
533 |
534 | ; Ignore source of message when ignoring repeated messages. When this setting
535 | ; is On you will not log errors with repeated messages from different files or
536 | ; source lines.
537 | ; http://php.net/ignore-repeated-source
538 | ignore_repeated_source = Off
539 |
540 | ; If this parameter is set to Off, then memory leaks will not be shown (on
541 | ; stdout or in the log). This is only effective in a debug compile, and if
542 | ; error reporting includes E_WARNING in the allowed list
543 | ; http://php.net/report-memleaks
544 | report_memleaks = On
545 |
546 | ; This setting is off by default.
547 | ;report_zend_debug = 0
548 |
549 | ; Turn off normal error reporting and emit XML-RPC error XML
550 | ; http://php.net/xmlrpc-errors
551 | ;xmlrpc_errors = 0
552 |
553 | ; An XML-RPC faultCode
554 | ;xmlrpc_error_number = 0
555 |
556 | ; When PHP displays or logs an error, it has the capability of formatting the
557 | ; error message as HTML for easier reading. This directive controls whether
558 | ; the error message is formatted as HTML or not.
559 | ; Note: This directive is hardcoded to Off for the CLI SAPI
560 | ; http://php.net/html-errors
561 | ;html_errors = On
562 |
563 | ; If html_errors is set to On *and* docref_root is not empty, then PHP
564 | ; produces clickable error messages that direct to a page describing the error
565 | ; or function causing the error in detail.
566 | ; You can download a copy of the PHP manual from http://php.net/docs
567 | ; and change docref_root to the base URL of your local copy including the
568 | ; leading '/'. You must also specify the file extension being used including
569 | ; the dot. PHP's default behavior is to leave these settings empty, in which
570 | ; case no links to documentation are generated.
571 | ; Note: Never use this feature for production boxes.
572 | ; http://php.net/docref-root
573 | ; Examples
574 | ;docref_root = "/phpmanual/"
575 |
576 | ; http://php.net/docref-ext
577 | ;docref_ext = .html
578 |
579 | ; String to output before an error message. PHP's default behavior is to leave
580 | ; this setting blank.
581 | ; http://php.net/error-prepend-string
582 | ; Example:
583 | ;error_prepend_string = ""
584 |
585 | ; String to output after an error message. PHP's default behavior is to leave
586 | ; this setting blank.
587 | ; http://php.net/error-append-string
588 | ; Example:
589 | ;error_append_string = ""
590 |
591 | ; Log errors to specified file. PHP's default behavior is to leave this value
592 | ; empty.
593 | ; http://php.net/error-log
594 | ; Example:
595 | ;error_log = php_errors.log
596 | ; Log errors to syslog (Event Log on Windows).
597 | ;error_log = syslog
598 |
599 | ; The syslog ident is a string which is prepended to every message logged
600 | ; to syslog. Only used when error_log is set to syslog.
601 | ;syslog.ident = php
602 |
603 | ; The syslog facility is used to specify what type of program is logging
604 | ; the message. Only used when error_log is set to syslog.
605 | ;syslog.facility = user
606 |
607 | ; Set this to disable filtering control characters (the default).
608 | ; Some loggers only accept NVT-ASCII, others accept anything that's not
609 | ; control characters. If your logger accepts everything, then no filtering
610 | ; is needed at all.
611 | ; Allowed values are:
612 | ; ascii (all printable ASCII characters and NL)
613 | ; no-ctrl (all characters except control characters)
614 | ; all (all characters)
615 | ; raw (like "all", but messages are not split at newlines)
616 | ; http://php.net/syslog.filter
617 | ;syslog.filter = ascii
618 |
619 | ;windows.show_crt_warning
620 | ; Default value: 0
621 | ; Development value: 0
622 | ; Production value: 0
623 |
624 | ;;;;;;;;;;;;;;;;;
625 | ; Data Handling ;
626 | ;;;;;;;;;;;;;;;;;
627 |
628 | ; The separator used in PHP generated URLs to separate arguments.
629 | ; PHP's default setting is "&".
630 | ; http://php.net/arg-separator.output
631 | ; Example:
632 | ;arg_separator.output = "&"
633 |
634 | ; List of separator(s) used by PHP to parse input URLs into variables.
635 | ; PHP's default setting is "&".
636 | ; NOTE: Every character in this directive is considered as separator!
637 | ; http://php.net/arg-separator.input
638 | ; Example:
639 | ;arg_separator.input = ";&"
640 |
641 | ; This directive determines which super global arrays are registered when PHP
642 | ; starts up. G,P,C,E & S are abbreviations for the following respective super
643 | ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
644 | ; paid for the registration of these arrays and because ENV is not as commonly
645 | ; used as the others, ENV is not recommended on productions servers. You
646 | ; can still get access to the environment variables through getenv() should you
647 | ; need to.
648 | ; Default Value: "EGPCS"
649 | ; Development Value: "GPCS"
650 | ; Production Value: "GPCS";
651 | ; http://php.net/variables-order
652 | variables_order = "GPCS"
653 |
654 | ; This directive determines which super global data (G,P & C) should be
655 | ; registered into the super global array REQUEST. If so, it also determines
656 | ; the order in which that data is registered. The values for this directive
657 | ; are specified in the same manner as the variables_order directive,
658 | ; EXCEPT one. Leaving this value empty will cause PHP to use the value set
659 | ; in the variables_order directive. It does not mean it will leave the super
660 | ; globals array REQUEST empty.
661 | ; Default Value: None
662 | ; Development Value: "GP"
663 | ; Production Value: "GP"
664 | ; http://php.net/request-order
665 | request_order = "GP"
666 |
667 | ; This directive determines whether PHP registers $argv & $argc each time it
668 | ; runs. $argv contains an array of all the arguments passed to PHP when a script
669 | ; is invoked. $argc contains an integer representing the number of arguments
670 | ; that were passed when the script was invoked. These arrays are extremely
671 | ; useful when running scripts from the command line. When this directive is
672 | ; enabled, registering these variables consumes CPU cycles and memory each time
673 | ; a script is executed. For performance reasons, this feature should be disabled
674 | ; on production servers.
675 | ; Note: This directive is hardcoded to On for the CLI SAPI
676 | ; Default Value: On
677 | ; Development Value: Off
678 | ; Production Value: Off
679 | ; http://php.net/register-argc-argv
680 | register_argc_argv = Off
681 |
682 | ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
683 | ; first used (Just In Time) instead of when the script starts. If these
684 | ; variables are not used within a script, having this directive on will result
685 | ; in a performance gain. The PHP directive register_argc_argv must be disabled
686 | ; for this directive to have any effect.
687 | ; http://php.net/auto-globals-jit
688 | auto_globals_jit = On
689 |
690 | ; Whether PHP will read the POST data.
691 | ; This option is enabled by default.
692 | ; Most likely, you won't want to disable this option globally. It causes $_POST
693 | ; and $_FILES to always be empty; the only way you will be able to read the
694 | ; POST data will be through the php://input stream wrapper. This can be useful
695 | ; to proxy requests or to process the POST data in a memory efficient fashion.
696 | ; http://php.net/enable-post-data-reading
697 | ;enable_post_data_reading = Off
698 |
699 | ; Maximum size of POST data that PHP will accept.
700 | ; Its value may be 0 to disable the limit. It is ignored if POST data reading
701 | ; is disabled through enable_post_data_reading.
702 | ; http://php.net/post-max-size
703 | post_max_size = 500M
704 |
705 | ; Automatically add files before PHP document.
706 | ; http://php.net/auto-prepend-file
707 | auto_prepend_file =
708 |
709 | ; Automatically add files after PHP document.
710 | ; http://php.net/auto-append-file
711 | auto_append_file =
712 |
713 | ; By default, PHP will output a media type using the Content-Type header. To
714 | ; disable this, simply set it to be empty.
715 | ;
716 | ; PHP's built-in default media type is set to text/html.
717 | ; http://php.net/default-mimetype
718 | default_mimetype = "text/html"
719 |
720 | ; PHP's default character set is set to UTF-8.
721 | ; http://php.net/default-charset
722 | default_charset = "UTF-8"
723 |
724 | ; PHP internal character encoding is set to empty.
725 | ; If empty, default_charset is used.
726 | ; http://php.net/internal-encoding
727 | ;internal_encoding =
728 |
729 | ; PHP input character encoding is set to empty.
730 | ; If empty, default_charset is used.
731 | ; http://php.net/input-encoding
732 | ;input_encoding =
733 |
734 | ; PHP output character encoding is set to empty.
735 | ; If empty, default_charset is used.
736 | ; See also output_buffer.
737 | ; http://php.net/output-encoding
738 | ;output_encoding =
739 |
740 | ;;;;;;;;;;;;;;;;;;;;;;;;;
741 | ; Paths and Directories ;
742 | ;;;;;;;;;;;;;;;;;;;;;;;;;
743 |
744 | ; UNIX: "/path1:/path2"
745 | ;include_path = ".:/php/includes"
746 | ;
747 | ; Windows: "\path1;\path2"
748 | ;include_path = ".;c:\php\includes"
749 | ;
750 | ; PHP's default setting for include_path is ".;/path/to/php/pear"
751 | ; http://php.net/include-path
752 |
753 | ; The root of the PHP pages, used only if nonempty.
754 | ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
755 | ; if you are running php as a CGI under any web server (other than IIS)
756 | ; see documentation for security issues. The alternate is to use the
757 | ; cgi.force_redirect configuration below
758 | ; http://php.net/doc-root
759 | doc_root =
760 |
761 | ; The directory under which PHP opens the script using /~username used only
762 | ; if nonempty.
763 | ; http://php.net/user-dir
764 | user_dir =
765 |
766 | ; Directory in which the loadable extensions (modules) reside.
767 | ; http://php.net/extension-dir
768 | ;extension_dir = "./"
769 | ; On windows:
770 | ;extension_dir = "ext"
771 |
772 | ; Directory where the temporary files should be placed.
773 | ; Defaults to the system default (see sys_get_temp_dir)
774 | ;sys_temp_dir = "/tmp"
775 |
776 | ; Whether or not to enable the dl() function. The dl() function does NOT work
777 | ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
778 | ; disabled on them.
779 | ; http://php.net/enable-dl
780 | enable_dl = Off
781 |
782 | ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
783 | ; most web servers. Left undefined, PHP turns this on by default. You can
784 | ; turn it off here AT YOUR OWN RISK
785 | ; **You CAN safely turn this off for IIS, in fact, you MUST.**
786 | ; http://php.net/cgi.force-redirect
787 | ;cgi.force_redirect = 1
788 |
789 | ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
790 | ; every request. PHP's default behavior is to disable this feature.
791 | ;cgi.nph = 1
792 |
793 | ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
794 | ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
795 | ; will look for to know it is OK to continue execution. Setting this variable MAY
796 | ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
797 | ; http://php.net/cgi.redirect-status-env
798 | ;cgi.redirect_status_env =
799 |
800 | ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
801 | ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
802 | ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
803 | ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
804 | ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
805 | ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
806 | ; http://php.net/cgi.fix-pathinfo
807 | ;cgi.fix_pathinfo=1
808 |
809 | ; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
810 | ; of the web tree and people will not be able to circumvent .htaccess security.
811 | ;cgi.discard_path=1
812 |
813 | ; FastCGI under IIS supports the ability to impersonate
814 | ; security tokens of the calling client. This allows IIS to define the
815 | ; security context that the request runs under. mod_fastcgi under Apache
816 | ; does not currently support this feature (03/17/2002)
817 | ; Set to 1 if running under IIS. Default is zero.
818 | ; http://php.net/fastcgi.impersonate
819 | ;fastcgi.impersonate = 1
820 |
821 | ; Disable logging through FastCGI connection. PHP's default behavior is to enable
822 | ; this feature.
823 | ;fastcgi.logging = 0
824 |
825 | ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
826 | ; use when sending HTTP response code. If set to 0, PHP sends Status: header that
827 | ; is supported by Apache. When this option is set to 1, PHP will send
828 | ; RFC2616 compliant header.
829 | ; Default is zero.
830 | ; http://php.net/cgi.rfc2616-headers
831 | ;cgi.rfc2616_headers = 0
832 |
833 | ; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
834 | ; (shebang) at the top of the running script. This line might be needed if the
835 | ; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
836 | ; mode skips this line and ignores its content if this directive is turned on.
837 | ; http://php.net/cgi.check-shebang-line
838 | ;cgi.check_shebang_line=1
839 |
840 | ;;;;;;;;;;;;;;;;
841 | ; File Uploads ;
842 | ;;;;;;;;;;;;;;;;
843 |
844 | ; Whether to allow HTTP file uploads.
845 | ; http://php.net/file-uploads
846 | file_uploads = On
847 |
848 | ; Temporary directory for HTTP uploaded files (will use system default if not
849 | ; specified).
850 | ; http://php.net/upload-tmp-dir
851 | ;upload_tmp_dir =
852 |
853 | ; Maximum allowed size for uploaded files.
854 | ; http://php.net/upload-max-filesize
855 | upload_max_filesize = 200M
856 |
857 | ; Maximum number of files that can be uploaded via a single request
858 | max_file_uploads = 20
859 |
860 | ;;;;;;;;;;;;;;;;;;
861 | ; Fopen wrappers ;
862 | ;;;;;;;;;;;;;;;;;;
863 |
864 | ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
865 | ; http://php.net/allow-url-fopen
866 | allow_url_fopen = Off
867 |
868 | ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
869 | ; http://php.net/allow-url-include
870 | allow_url_include = Off
871 |
872 | ; Define the anonymous ftp password (your email address). PHP's default setting
873 | ; for this is empty.
874 | ; http://php.net/from
875 | ;from="john@doe.com"
876 |
877 | ; Define the User-Agent string. PHP's default setting for this is empty.
878 | ; http://php.net/user-agent
879 | ;user_agent="PHP"
880 |
881 | ; Default timeout for socket based streams (seconds)
882 | ; http://php.net/default-socket-timeout
883 | default_socket_timeout = 60
884 |
885 | ; If your scripts have to deal with files from Macintosh systems,
886 | ; or you are running on a Mac and need to deal with files from
887 | ; unix or win32 systems, setting this flag will cause PHP to
888 | ; automatically detect the EOL character in those files so that
889 | ; fgets() and file() will work regardless of the source of the file.
890 | ; http://php.net/auto-detect-line-endings
891 | ;auto_detect_line_endings = Off
892 |
893 | ;;;;;;;;;;;;;;;;;;;;;;
894 | ; Dynamic Extensions ;
895 | ;;;;;;;;;;;;;;;;;;;;;;
896 |
897 | ; If you wish to have an extension loaded automatically, use the following
898 | ; syntax:
899 | ;
900 | ; extension=modulename
901 | ;
902 | ; For example:
903 | ;
904 | ; extension=mysqli
905 | ;
906 | ; When the extension library to load is not located in the default extension
907 | ; directory, You may specify an absolute path to the library file:
908 | ;
909 | ; extension=/path/to/extension/mysqli.so
910 | ;
911 | ; Note : The syntax used in previous PHP versions ('extension=.so' and
912 | ; 'extension='php_.dll') is supported for legacy reasons and may be
913 | ; deprecated in a future PHP major version. So, when it is possible, please
914 | ; move to the new ('extension=) syntax.
915 | ;
916 | ; Notes for Windows environments :
917 | ;
918 | ; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+)
919 | ; extension folders as well as the separate PECL DLL download (PHP 5+).
920 | ; Be sure to appropriately set the extension_dir directive.
921 | ;
922 | ;extension=bz2
923 | ;extension=curl
924 | ;extension=ffi
925 | ;extension=ftp
926 | ;extension=fileinfo
927 | ;extension=gd
928 | ;extension=gettext
929 | ;extension=gmp
930 | ;extension=intl
931 | ;extension=imap
932 | ;extension=ldap
933 | ;extension=mbstring
934 | ;extension=exif ; Must be after mbstring as it depends on it
935 | ;extension=mysqli
936 | ;extension=oci8_12c ; Use with Oracle Database 12c Instant Client
937 | ;extension=odbc
938 | ;extension=openssl
939 | ;extension=pdo_firebird
940 | ;extension=pdo_mysql
941 | ;extension=pdo_oci
942 | ;extension=pdo_odbc
943 | ;extension=pdo_pgsql
944 | ;extension=pdo_sqlite
945 | ;extension=pgsql
946 | ;extension=shmop
947 |
948 | ; The MIBS data available in the PHP distribution must be installed.
949 | ; See http://www.php.net/manual/en/snmp.installation.php
950 | ;extension=snmp
951 |
952 | ;extension=soap
953 | ;extension=sockets
954 | ;extension=sodium
955 | ;extension=sqlite3
956 | ;extension=tidy
957 | ;extension=xsl
958 |
959 | extension=swoole
960 | zend_extension=opcache
961 |
962 | ;;;;;;;;;;;;;;;;;;;
963 | ; Module Settings ;
964 | ;;;;;;;;;;;;;;;;;;;
965 |
966 | [CLI Server]
967 | ; Whether the CLI web server uses ANSI color coding in its terminal output.
968 | cli_server.color = On
969 |
970 | [Date]
971 | ; Defines the default timezone used by the date functions
972 | ; http://php.net/date.timezone
973 | ;date.timezone =
974 |
975 | ; http://php.net/date.default-latitude
976 | ;date.default_latitude = 31.7667
977 |
978 | ; http://php.net/date.default-longitude
979 | ;date.default_longitude = 35.2333
980 |
981 | ; http://php.net/date.sunrise-zenith
982 | ;date.sunrise_zenith = 90.833333
983 |
984 | ; http://php.net/date.sunset-zenith
985 | ;date.sunset_zenith = 90.833333
986 |
987 | [filter]
988 | ; http://php.net/filter.default
989 | ;filter.default = unsafe_raw
990 |
991 | ; http://php.net/filter.default-flags
992 | ;filter.default_flags =
993 |
994 | [iconv]
995 | ; Use of this INI entry is deprecated, use global input_encoding instead.
996 | ; If empty, default_charset or input_encoding or iconv.input_encoding is used.
997 | ; The precedence is: default_charset < input_encoding < iconv.input_encoding
998 | ;iconv.input_encoding =
999 |
1000 | ; Use of this INI entry is deprecated, use global internal_encoding instead.
1001 | ; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
1002 | ; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
1003 | ;iconv.internal_encoding =
1004 |
1005 | ; Use of this INI entry is deprecated, use global output_encoding instead.
1006 | ; If empty, default_charset or output_encoding or iconv.output_encoding is used.
1007 | ; The precedence is: default_charset < output_encoding < iconv.output_encoding
1008 | ; To use an output encoding conversion, iconv's output handler must be set
1009 | ; otherwise output encoding conversion cannot be performed.
1010 | ;iconv.output_encoding =
1011 |
1012 | [imap]
1013 | ; rsh/ssh logins are disabled by default. Use this INI entry if you want to
1014 | ; enable them. Note that the IMAP library does not filter mailbox names before
1015 | ; passing them to rsh/ssh command, thus passing untrusted data to this function
1016 | ; with rsh/ssh enabled is insecure.
1017 | ;imap.enable_insecure_rsh=0
1018 |
1019 | [intl]
1020 | ;intl.default_locale =
1021 | ; This directive allows you to produce PHP errors when some error
1022 | ; happens within intl functions. The value is the level of the error produced.
1023 | ; Default is 0, which does not produce any errors.
1024 | ;intl.error_level = E_WARNING
1025 | ;intl.use_exceptions = 0
1026 |
1027 | [sqlite3]
1028 | ; Directory pointing to SQLite3 extensions
1029 | ; http://php.net/sqlite3.extension-dir
1030 | ;sqlite3.extension_dir =
1031 |
1032 | ; SQLite defensive mode flag (only available from SQLite 3.26+)
1033 | ; When the defensive flag is enabled, language features that allow ordinary
1034 | ; SQL to deliberately corrupt the database file are disabled. This forbids
1035 | ; writing directly to the schema, shadow tables (eg. FTS data tables), or
1036 | ; the sqlite_dbpage virtual table.
1037 | ; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
1038 | ; (for older SQLite versions, this flag has no use)
1039 | ;sqlite3.defensive = 1
1040 |
1041 | [Pcre]
1042 | ; PCRE library backtracking limit.
1043 | ; http://php.net/pcre.backtrack-limit
1044 | ;pcre.backtrack_limit=100000
1045 |
1046 | ; PCRE library recursion limit.
1047 | ; Please note that if you set this value to a high number you may consume all
1048 | ; the available process stack and eventually crash PHP (due to reaching the
1049 | ; stack size limit imposed by the Operating System).
1050 | ; http://php.net/pcre.recursion-limit
1051 | ;pcre.recursion_limit=100000
1052 |
1053 | ; Enables or disables JIT compilation of patterns. This requires the PCRE
1054 | ; library to be compiled with JIT support.
1055 | pcre.jit=1
1056 |
1057 | [Pdo]
1058 | ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
1059 | ; http://php.net/pdo-odbc.connection-pooling
1060 | ;pdo_odbc.connection_pooling=strict
1061 |
1062 | [Pdo_mysql]
1063 | ; Default socket name for local MySQL connects. If empty, uses the built-in
1064 | ; MySQL defaults.
1065 | pdo_mysql.default_socket=
1066 |
1067 | [Phar]
1068 | ; http://php.net/phar.readonly
1069 | ;phar.readonly = On
1070 |
1071 | ; http://php.net/phar.require-hash
1072 | ;phar.require_hash = On
1073 |
1074 | ;phar.cache_list =
1075 |
1076 | [mail function]
1077 | ; For Win32 only.
1078 | ; http://php.net/smtp
1079 | SMTP = localhost
1080 | ; http://php.net/smtp-port
1081 | smtp_port = 25
1082 |
1083 | ; For Win32 only.
1084 | ; http://php.net/sendmail-from
1085 | ;sendmail_from = me@example.com
1086 |
1087 | ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
1088 | ; http://php.net/sendmail-path
1089 | ;sendmail_path =
1090 |
1091 | ; Force the addition of the specified parameters to be passed as extra parameters
1092 | ; to the sendmail binary. These parameters will always replace the value of
1093 | ; the 5th parameter to mail().
1094 | ;mail.force_extra_parameters =
1095 |
1096 | ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
1097 | mail.add_x_header = Off
1098 |
1099 | ; The path to a log file that will log all mail() calls. Log entries include
1100 | ; the full path of the script, line number, To address and headers.
1101 | ;mail.log =
1102 | ; Log mail to syslog (Event Log on Windows).
1103 | ;mail.log = syslog
1104 |
1105 | [ODBC]
1106 | ; http://php.net/odbc.default-db
1107 | ;odbc.default_db = Not yet implemented
1108 |
1109 | ; http://php.net/odbc.default-user
1110 | ;odbc.default_user = Not yet implemented
1111 |
1112 | ; http://php.net/odbc.default-pw
1113 | ;odbc.default_pw = Not yet implemented
1114 |
1115 | ; Controls the ODBC cursor model.
1116 | ; Default: SQL_CURSOR_STATIC (default).
1117 | ;odbc.default_cursortype
1118 |
1119 | ; Allow or prevent persistent links.
1120 | ; http://php.net/odbc.allow-persistent
1121 | odbc.allow_persistent = On
1122 |
1123 | ; Check that a connection is still valid before reuse.
1124 | ; http://php.net/odbc.check-persistent
1125 | odbc.check_persistent = On
1126 |
1127 | ; Maximum number of persistent links. -1 means no limit.
1128 | ; http://php.net/odbc.max-persistent
1129 | odbc.max_persistent = -1
1130 |
1131 | ; Maximum number of links (persistent + non-persistent). -1 means no limit.
1132 | ; http://php.net/odbc.max-links
1133 | odbc.max_links = -1
1134 |
1135 | ; Handling of LONG fields. Returns number of bytes to variables. 0 means
1136 | ; passthru.
1137 | ; http://php.net/odbc.defaultlrl
1138 | odbc.defaultlrl = 4096
1139 |
1140 | ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
1141 | ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
1142 | ; of odbc.defaultlrl and odbc.defaultbinmode
1143 | ; http://php.net/odbc.defaultbinmode
1144 | odbc.defaultbinmode = 1
1145 |
1146 | [MySQLi]
1147 |
1148 | ; Maximum number of persistent links. -1 means no limit.
1149 | ; http://php.net/mysqli.max-persistent
1150 | mysqli.max_persistent = -1
1151 |
1152 | ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
1153 | ; http://php.net/mysqli.allow_local_infile
1154 | ;mysqli.allow_local_infile = On
1155 |
1156 | ; Allow or prevent persistent links.
1157 | ; http://php.net/mysqli.allow-persistent
1158 | mysqli.allow_persistent = On
1159 |
1160 | ; Maximum number of links. -1 means no limit.
1161 | ; http://php.net/mysqli.max-links
1162 | mysqli.max_links = -1
1163 |
1164 | ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
1165 | ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
1166 | ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
1167 | ; at MYSQL_PORT.
1168 | ; http://php.net/mysqli.default-port
1169 | mysqli.default_port = 3306
1170 |
1171 | ; Default socket name for local MySQL connects. If empty, uses the built-in
1172 | ; MySQL defaults.
1173 | ; http://php.net/mysqli.default-socket
1174 | mysqli.default_socket =
1175 |
1176 | ; Default host for mysqli_connect() (doesn't apply in safe mode).
1177 | ; http://php.net/mysqli.default-host
1178 | mysqli.default_host =
1179 |
1180 | ; Default user for mysqli_connect() (doesn't apply in safe mode).
1181 | ; http://php.net/mysqli.default-user
1182 | mysqli.default_user =
1183 |
1184 | ; Default password for mysqli_connect() (doesn't apply in safe mode).
1185 | ; Note that this is generally a *bad* idea to store passwords in this file.
1186 | ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
1187 | ; and reveal this password! And of course, any users with read access to this
1188 | ; file will be able to reveal the password as well.
1189 | ; http://php.net/mysqli.default-pw
1190 | mysqli.default_pw =
1191 |
1192 | ; Allow or prevent reconnect
1193 | mysqli.reconnect = Off
1194 |
1195 | [mysqlnd]
1196 | ; Enable / Disable collection of general statistics by mysqlnd which can be
1197 | ; used to tune and monitor MySQL operations.
1198 | mysqlnd.collect_statistics = On
1199 |
1200 | ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
1201 | ; used to tune and monitor MySQL operations.
1202 | mysqlnd.collect_memory_statistics = Off
1203 |
1204 | ; Records communication from all extensions using mysqlnd to the specified log
1205 | ; file.
1206 | ; http://php.net/mysqlnd.debug
1207 | ;mysqlnd.debug =
1208 |
1209 | ; Defines which queries will be logged.
1210 | ;mysqlnd.log_mask = 0
1211 |
1212 | ; Default size of the mysqlnd memory pool, which is used by result sets.
1213 | ;mysqlnd.mempool_default_size = 16000
1214 |
1215 | ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
1216 | ;mysqlnd.net_cmd_buffer_size = 2048
1217 |
1218 | ; Size of a pre-allocated buffer used for reading data sent by the server in
1219 | ; bytes.
1220 | ;mysqlnd.net_read_buffer_size = 32768
1221 |
1222 | ; Timeout for network requests in seconds.
1223 | ;mysqlnd.net_read_timeout = 31536000
1224 |
1225 | ; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
1226 | ; key.
1227 | ;mysqlnd.sha256_server_public_key =
1228 |
1229 | [OCI8]
1230 |
1231 | ; Connection: Enables privileged connections using external
1232 | ; credentials (OCI_SYSOPER, OCI_SYSDBA)
1233 | ; http://php.net/oci8.privileged-connect
1234 | ;oci8.privileged_connect = Off
1235 |
1236 | ; Connection: The maximum number of persistent OCI8 connections per
1237 | ; process. Using -1 means no limit.
1238 | ; http://php.net/oci8.max-persistent
1239 | ;oci8.max_persistent = -1
1240 |
1241 | ; Connection: The maximum number of seconds a process is allowed to
1242 | ; maintain an idle persistent connection. Using -1 means idle
1243 | ; persistent connections will be maintained forever.
1244 | ; http://php.net/oci8.persistent-timeout
1245 | ;oci8.persistent_timeout = -1
1246 |
1247 | ; Connection: The number of seconds that must pass before issuing a
1248 | ; ping during oci_pconnect() to check the connection validity. When
1249 | ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
1250 | ; pings completely.
1251 | ; http://php.net/oci8.ping-interval
1252 | ;oci8.ping_interval = 60
1253 |
1254 | ; Connection: Set this to a user chosen connection class to be used
1255 | ; for all pooled server requests with Oracle 11g Database Resident
1256 | ; Connection Pooling (DRCP). To use DRCP, this value should be set to
1257 | ; the same string for all web servers running the same application,
1258 | ; the database pool must be configured, and the connection string must
1259 | ; specify to use a pooled server.
1260 | ;oci8.connection_class =
1261 |
1262 | ; High Availability: Using On lets PHP receive Fast Application
1263 | ; Notification (FAN) events generated when a database node fails. The
1264 | ; database must also be configured to post FAN events.
1265 | ;oci8.events = Off
1266 |
1267 | ; Tuning: This option enables statement caching, and specifies how
1268 | ; many statements to cache. Using 0 disables statement caching.
1269 | ; http://php.net/oci8.statement-cache-size
1270 | ;oci8.statement_cache_size = 20
1271 |
1272 | ; Tuning: Enables statement prefetching and sets the default number of
1273 | ; rows that will be fetched automatically after statement execution.
1274 | ; http://php.net/oci8.default-prefetch
1275 | ;oci8.default_prefetch = 100
1276 |
1277 | ; Compatibility. Using On means oci_close() will not close
1278 | ; oci_connect() and oci_new_connect() connections.
1279 | ; http://php.net/oci8.old-oci-close-semantics
1280 | ;oci8.old_oci_close_semantics = Off
1281 |
1282 | [PostgreSQL]
1283 | ; Allow or prevent persistent links.
1284 | ; http://php.net/pgsql.allow-persistent
1285 | pgsql.allow_persistent = On
1286 |
1287 | ; Detect broken persistent links always with pg_pconnect().
1288 | ; Auto reset feature requires a little overheads.
1289 | ; http://php.net/pgsql.auto-reset-persistent
1290 | pgsql.auto_reset_persistent = Off
1291 |
1292 | ; Maximum number of persistent links. -1 means no limit.
1293 | ; http://php.net/pgsql.max-persistent
1294 | pgsql.max_persistent = -1
1295 |
1296 | ; Maximum number of links (persistent+non persistent). -1 means no limit.
1297 | ; http://php.net/pgsql.max-links
1298 | pgsql.max_links = -1
1299 |
1300 | ; Ignore PostgreSQL backends Notice message or not.
1301 | ; Notice message logging require a little overheads.
1302 | ; http://php.net/pgsql.ignore-notice
1303 | pgsql.ignore_notice = 0
1304 |
1305 | ; Log PostgreSQL backends Notice message or not.
1306 | ; Unless pgsql.ignore_notice=0, module cannot log notice message.
1307 | ; http://php.net/pgsql.log-notice
1308 | pgsql.log_notice = 0
1309 |
1310 | [bcmath]
1311 | ; Number of decimal digits for all bcmath functions.
1312 | ; http://php.net/bcmath.scale
1313 | bcmath.scale = 0
1314 |
1315 | [browscap]
1316 | ; http://php.net/browscap
1317 | ;browscap = extra/browscap.ini
1318 |
1319 | [Session]
1320 | ; Handler used to store/retrieve data.
1321 | ; http://php.net/session.save-handler
1322 | session.save_handler = files
1323 |
1324 | ; Argument passed to save_handler. In the case of files, this is the path
1325 | ; where data files are stored. Note: Windows users have to change this
1326 | ; variable in order to use PHP's session functions.
1327 | ;
1328 | ; The path can be defined as:
1329 | ;
1330 | ; session.save_path = "N;/path"
1331 | ;
1332 | ; where N is an integer. Instead of storing all the session files in
1333 | ; /path, what this will do is use subdirectories N-levels deep, and
1334 | ; store the session data in those directories. This is useful if
1335 | ; your OS has problems with many files in one directory, and is
1336 | ; a more efficient layout for servers that handle many sessions.
1337 | ;
1338 | ; NOTE 1: PHP will not create this directory structure automatically.
1339 | ; You can use the script in the ext/session dir for that purpose.
1340 | ; NOTE 2: See the section on garbage collection below if you choose to
1341 | ; use subdirectories for session storage
1342 | ;
1343 | ; The file storage module creates files using mode 600 by default.
1344 | ; You can change that by using
1345 | ;
1346 | ; session.save_path = "N;MODE;/path"
1347 | ;
1348 | ; where MODE is the octal representation of the mode. Note that this
1349 | ; does not overwrite the process's umask.
1350 | ; http://php.net/session.save-path
1351 | ;session.save_path = "/tmp"
1352 |
1353 | ; Whether to use strict session mode.
1354 | ; Strict session mode does not accept an uninitialized session ID, and
1355 | ; regenerates the session ID if the browser sends an uninitialized session ID.
1356 | ; Strict mode protects applications from session fixation via a session adoption
1357 | ; vulnerability. It is disabled by default for maximum compatibility, but
1358 | ; enabling it is encouraged.
1359 | ; https://wiki.php.net/rfc/strict_sessions
1360 | session.use_strict_mode = 0
1361 |
1362 | ; Whether to use cookies.
1363 | ; http://php.net/session.use-cookies
1364 | session.use_cookies = 1
1365 |
1366 | ; http://php.net/session.cookie-secure
1367 | ;session.cookie_secure =
1368 |
1369 | ; This option forces PHP to fetch and use a cookie for storing and maintaining
1370 | ; the session id. We encourage this operation as it's very helpful in combating
1371 | ; session hijacking when not specifying and managing your own session id. It is
1372 | ; not the be-all and end-all of session hijacking defense, but it's a good start.
1373 | ; http://php.net/session.use-only-cookies
1374 | session.use_only_cookies = 1
1375 |
1376 | ; Name of the session (used as cookie name).
1377 | ; http://php.net/session.name
1378 | session.name = PHPSESSID
1379 |
1380 | ; Initialize session on request startup.
1381 | ; http://php.net/session.auto-start
1382 | session.auto_start = 0
1383 |
1384 | ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
1385 | ; http://php.net/session.cookie-lifetime
1386 | session.cookie_lifetime = 0
1387 |
1388 | ; The path for which the cookie is valid.
1389 | ; http://php.net/session.cookie-path
1390 | session.cookie_path = /
1391 |
1392 | ; The domain for which the cookie is valid.
1393 | ; http://php.net/session.cookie-domain
1394 | session.cookie_domain =
1395 |
1396 | ; Whether or not to add the httpOnly flag to the cookie, which makes it
1397 | ; inaccessible to browser scripting languages such as JavaScript.
1398 | ; http://php.net/session.cookie-httponly
1399 | session.cookie_httponly =
1400 |
1401 | ; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
1402 | ; Current valid values are "Strict", "Lax" or "None". When using "None",
1403 | ; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
1404 | ; https://tools.ietf.org/html/draft-west-first-party-cookies-07
1405 | session.cookie_samesite =
1406 |
1407 | ; Handler used to serialize data. php is the standard serializer of PHP.
1408 | ; http://php.net/session.serialize-handler
1409 | session.serialize_handler = php
1410 |
1411 | ; Defines the probability that the 'garbage collection' process is started on every
1412 | ; session initialization. The probability is calculated by using gc_probability/gc_divisor,
1413 | ; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
1414 | ; Default Value: 1
1415 | ; Development Value: 1
1416 | ; Production Value: 1
1417 | ; http://php.net/session.gc-probability
1418 | session.gc_probability = 1
1419 |
1420 | ; Defines the probability that the 'garbage collection' process is started on every
1421 | ; session initialization. The probability is calculated by using gc_probability/gc_divisor,
1422 | ; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
1423 | ; For high volume production servers, using a value of 1000 is a more efficient approach.
1424 | ; Default Value: 100
1425 | ; Development Value: 1000
1426 | ; Production Value: 1000
1427 | ; http://php.net/session.gc-divisor
1428 | session.gc_divisor = 1000
1429 |
1430 | ; After this number of seconds, stored data will be seen as 'garbage' and
1431 | ; cleaned up by the garbage collection process.
1432 | ; http://php.net/session.gc-maxlifetime
1433 | session.gc_maxlifetime = 1440
1434 |
1435 | ; NOTE: If you are using the subdirectory option for storing session files
1436 | ; (see session.save_path above), then garbage collection does *not*
1437 | ; happen automatically. You will need to do your own garbage
1438 | ; collection through a shell script, cron entry, or some other method.
1439 | ; For example, the following script is the equivalent of setting
1440 | ; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
1441 | ; find /path/to/sessions -cmin +24 -type f | xargs rm
1442 |
1443 | ; Check HTTP Referer to invalidate externally stored URLs containing ids.
1444 | ; HTTP_REFERER has to contain this substring for the session to be
1445 | ; considered as valid.
1446 | ; http://php.net/session.referer-check
1447 | session.referer_check =
1448 |
1449 | ; Set to {nocache,private,public,} to determine HTTP caching aspects
1450 | ; or leave this empty to avoid sending anti-caching headers.
1451 | ; http://php.net/session.cache-limiter
1452 | session.cache_limiter = nocache
1453 |
1454 | ; Document expires after n minutes.
1455 | ; http://php.net/session.cache-expire
1456 | session.cache_expire = 180
1457 |
1458 | ; trans sid support is disabled by default.
1459 | ; Use of trans sid may risk your users' security.
1460 | ; Use this option with caution.
1461 | ; - User may send URL contains active session ID
1462 | ; to other person via. email/irc/etc.
1463 | ; - URL that contains active session ID may be stored
1464 | ; in publicly accessible computer.
1465 | ; - User may access your site with the same session ID
1466 | ; always using URL stored in browser's history or bookmarks.
1467 | ; http://php.net/session.use-trans-sid
1468 | session.use_trans_sid = 0
1469 |
1470 | ; Set session ID character length. This value could be between 22 to 256.
1471 | ; Shorter length than default is supported only for compatibility reason.
1472 | ; Users should use 32 or more chars.
1473 | ; http://php.net/session.sid-length
1474 | ; Default Value: 32
1475 | ; Development Value: 26
1476 | ; Production Value: 26
1477 | session.sid_length = 26
1478 |
1479 | ; The URL rewriter will look for URLs in a defined set of HTML tags.
1480 | ;