├── .gitignore ├── 8821cu.conf ├── FAQ.md ├── Kconfig ├── LICENSE ├── Makefile ├── README.md ├── core ├── crypto │ ├── aes-ccm.c │ ├── aes-ctr.c │ ├── aes-gcm.c │ ├── aes-internal-enc.c │ ├── aes-internal.c │ ├── aes-omac1.c │ ├── aes-siv.c │ ├── aes.h │ ├── aes_i.h │ ├── aes_siv.h │ ├── aes_wrap.h │ ├── ccmp.c │ ├── gcmp.c │ ├── rtw_crypto_wrap.c │ ├── rtw_crypto_wrap.h │ ├── sha256-internal.c │ ├── sha256-prf.c │ ├── sha256.c │ ├── sha256.h │ ├── sha256_i.h │ └── wlancrypto_wrap.h ├── efuse │ └── rtw_efuse.c ├── mesh │ ├── rtw_mesh.c │ ├── rtw_mesh.h │ ├── rtw_mesh_hwmp.c │ ├── rtw_mesh_hwmp.h │ ├── rtw_mesh_pathtbl.c │ └── rtw_mesh_pathtbl.h ├── monitor │ ├── rtw_radiotap.c │ └── rtw_radiotap.h ├── rtw_ap.c ├── rtw_beamforming.c ├── rtw_br_ext.c ├── rtw_bt_mp.c ├── rtw_btcoex.c ├── rtw_btcoex_wifionly.c ├── rtw_chplan.c ├── rtw_chplan.h ├── rtw_cmd.c ├── rtw_debug.c ├── rtw_eeprom.c ├── rtw_ft.c ├── rtw_ieee80211.c ├── rtw_io.c ├── rtw_ioctl_query.c ├── rtw_ioctl_set.c ├── rtw_iol.c ├── rtw_mbo.c ├── rtw_mem.c ├── rtw_mi.c ├── rtw_mlme.c ├── rtw_mlme_ext.c ├── rtw_mp.c ├── rtw_odm.c ├── rtw_p2p.c ├── rtw_pwrctrl.c ├── rtw_recv.c ├── rtw_rf.c ├── rtw_rm.c ├── rtw_rm_fsm.c ├── rtw_rm_util.c ├── rtw_roch.c ├── rtw_rson.c ├── rtw_sdio.c ├── rtw_security.c ├── rtw_sreset.c ├── rtw_sta_mgt.c ├── rtw_swcrypto.c ├── rtw_tdls.c ├── rtw_vht.c ├── rtw_wapi.c ├── rtw_wapi_sms4.c ├── rtw_wlan_util.c ├── rtw_wnm.c ├── rtw_xmit.c └── wds │ ├── rtw_wds.c │ └── rtw_wds.h ├── default-editor.txt ├── dkms-make.sh ├── dkms.conf ├── docs ├── Concurrent_Mode.md ├── Guides │ ├── 00-README_1ST │ ├── HowTo_enable_and_verify_TDLS_function_in_Wi-Fi_driver.pdf │ ├── HowTo_enable_the_power_saving_functionality.pdf │ ├── HowTo_support_WIFI_certification_test.pdf │ ├── HowTo_support_more_VidPids.pdf │ ├── How_to_append_vendor_specific_ie_to_driver_management_frames.pdf │ ├── How_to_enable_Realtek_RSON_function.pdf │ ├── How_to_set_driver_debug_log_level.pdf │ ├── Miracast_for_Realtek_WiFi.pdf │ ├── Quick_Start_Guide_for_Adaptivity_and_Carrier_Sensing_Test.pdf │ ├── Quick_Start_Guide_for_Bridge.pdf │ ├── Quick_Start_Guide_for_Driver_Compilation_and_Installation.pdf │ ├── Quick_Start_Guide_for_SoftAP.pdf │ ├── Quick_Start_Guide_for_Station_Mode.pdf │ ├── Quick_Start_Guide_for_WOW.pdf │ ├── Quick_Start_Guide_for_WPA3.pdf │ ├── Quick_Start_Guide_for_wpa_supplicant_WiFi_P2P_test.pdf │ ├── RTK_P2P_WFD_Programming_guide.pdf │ ├── Realtek_WiFi_concurrent_mode_Introduction.pdf │ ├── SoftAP_Mode_features.pdf │ ├── Wireless_tools_porting_guide.pdf │ ├── android_ref_codes_10.x │ │ ├── Realtek_Wi-Fi_SDK_for_Android_10.pdf │ │ ├── realtek_wifi_SDK_for_android_10_x_20200505.tar.gz │ │ ├── supplicant_overlay_config.tar.gz │ │ └── wpa_supplicant_8_10.x_rtw_29226.20200409.tar.gz │ ├── android_ref_codes_11.x │ │ ├── Realtek_Wi-Fi_SDK_for_Android_11.pdf │ │ ├── realtek_wifi_SDK_for_android_11_x_20210416.tar.gz │ │ ├── supplicant_overlay_config.tar.gz │ │ ├── wpa_supplicant_8_11.0.0.r3_rtw_20201005.patch │ │ └── wpa_supplicant_8_11.0.0.r3_rtw_20201005.tar.gz │ ├── btcoex │ │ ├── HowTo_debug_BT_coexistence.pdf │ │ └── script │ │ │ ├── btcoex_lnx.sh │ │ │ └── btcoex_win.bat │ ├── linux_dhcp_server_notes.txt │ └── wpa_cli_with_wpa_supplicant.pdf └── ReleaseNotes.pdf ├── edit-options.sh ├── hal ├── HalPwrSeqCmd.c ├── btc │ ├── btc_basic_types.h │ ├── halbtc8821c1ant.c │ ├── halbtc8821c1ant.h │ ├── halbtc8821c2ant.c │ ├── halbtc8821c2ant.h │ ├── halbtc8821cwifionly.c │ ├── halbtc8821cwifionly.h │ ├── halbtcoutsrc.h │ └── mp_precomp.h ├── efuse │ ├── efuse_mask.h │ └── rtl8821c │ │ ├── HalEfuseMask8821C_PCIE.c │ │ ├── HalEfuseMask8821C_PCIE.h │ │ ├── HalEfuseMask8821C_SDIO.c │ │ ├── HalEfuseMask8821C_SDIO.h │ │ ├── HalEfuseMask8821C_USB.c │ │ └── HalEfuseMask8821C_USB.h ├── hal_btcoex.c ├── hal_btcoex_wifionly.c ├── hal_com.c ├── hal_com_c2h.h ├── hal_com_phycfg.c ├── hal_dm.c ├── hal_dm.h ├── hal_dm_acs.c ├── hal_dm_acs.h ├── hal_halmac.c ├── hal_halmac.h ├── hal_hci │ └── hal_usb.c ├── hal_intf.c ├── hal_mcc.c ├── hal_mp.c ├── hal_phy.c ├── halmac │ ├── halmac_2_platform.h │ ├── halmac_88xx │ │ ├── halmac_8821c │ │ │ ├── halmac_8821c_cfg.h │ │ │ ├── halmac_cfg_wmac_8821c.c │ │ │ ├── halmac_cfg_wmac_8821c.h │ │ │ ├── halmac_common_8821c.c │ │ │ ├── halmac_common_8821c.h │ │ │ ├── halmac_gpio_8821c.c │ │ │ ├── halmac_gpio_8821c.h │ │ │ ├── halmac_init_8821c.c │ │ │ ├── halmac_init_8821c.h │ │ │ ├── halmac_phy_8821c.c │ │ │ ├── halmac_pwr_seq_8821c.c │ │ │ ├── halmac_pwr_seq_8821c.h │ │ │ ├── halmac_usb_8821c.c │ │ │ └── halmac_usb_8821c.h │ │ ├── halmac_88xx_cfg.h │ │ ├── halmac_bb_rf_88xx.c │ │ ├── halmac_bb_rf_88xx.h │ │ ├── halmac_cfg_wmac_88xx.c │ │ ├── halmac_cfg_wmac_88xx.h │ │ ├── halmac_common_88xx.c │ │ ├── halmac_common_88xx.h │ │ ├── halmac_efuse_88xx.c │ │ ├── halmac_efuse_88xx.h │ │ ├── halmac_flash_88xx.c │ │ ├── halmac_flash_88xx.h │ │ ├── halmac_fw_88xx.c │ │ ├── halmac_fw_88xx.h │ │ ├── halmac_gpio_88xx.c │ │ ├── halmac_gpio_88xx.h │ │ ├── halmac_init_88xx.c │ │ ├── halmac_init_88xx.h │ │ ├── halmac_mimo_88xx.c │ │ ├── halmac_mimo_88xx.h │ │ ├── halmac_usb_88xx.c │ │ └── halmac_usb_88xx.h │ ├── halmac_api.c │ ├── halmac_api.h │ ├── halmac_bit2.h │ ├── halmac_bit_8197f.h │ ├── halmac_bit_8812f.h │ ├── halmac_bit_8814b.h │ ├── halmac_bit_8821c.h │ ├── halmac_bit_8822b.h │ ├── halmac_bit_8822c.h │ ├── halmac_dbg.c │ ├── halmac_dbg.h │ ├── halmac_fw_info.h │ ├── halmac_fw_offload_c2h_ap.h │ ├── halmac_fw_offload_c2h_nic.h │ ├── halmac_fw_offload_h2c_ap.h │ ├── halmac_fw_offload_h2c_nic.h │ ├── halmac_gpio_cmd.h │ ├── halmac_h2c_extra_info_ap.h │ ├── halmac_h2c_extra_info_nic.h │ ├── halmac_hw_cfg.h │ ├── halmac_intf_phy_cmd.h │ ├── halmac_original_c2h_ap.h │ ├── halmac_original_c2h_nic.h │ ├── halmac_original_h2c_ap.h │ ├── halmac_original_h2c_nic.h │ ├── halmac_pcie_reg.h │ ├── halmac_pwr_seq_cmd.h │ ├── halmac_reg2.h │ ├── halmac_reg_8197f.h │ ├── halmac_reg_8812f.h │ ├── halmac_reg_8814b.h │ ├── halmac_reg_8821c.h │ ├── halmac_reg_8822b.h │ ├── halmac_reg_8822c.h │ ├── halmac_rx_bd_nic.h │ ├── halmac_rx_desc_ap.h │ ├── halmac_rx_desc_chip.h │ ├── halmac_rx_desc_nic.h │ ├── halmac_sdio_reg.h │ ├── halmac_state_machine.h │ ├── halmac_tx_bd_nic.h │ ├── halmac_tx_desc_ap.h │ ├── halmac_tx_desc_buffer_ap.h │ ├── halmac_tx_desc_buffer_chip.h │ ├── halmac_tx_desc_buffer_nic.h │ ├── halmac_tx_desc_chip.h │ ├── halmac_tx_desc_ie_ap.h │ ├── halmac_tx_desc_ie_chip.h │ ├── halmac_tx_desc_ie_nic.h │ ├── halmac_tx_desc_nic.h │ ├── halmac_type.h │ └── halmac_usb_reg.h ├── led │ ├── hal_led.c │ └── hal_usb_led.c ├── phydm │ ├── ap_makefile.mk │ ├── halhwimg.h │ ├── halrf │ │ ├── halphyrf_ap.c │ │ ├── halphyrf_ap.h │ │ ├── halphyrf_ce.c │ │ ├── halphyrf_ce.h │ │ ├── halphyrf_iot.c │ │ ├── halphyrf_iot.h │ │ ├── halphyrf_win.c │ │ ├── halphyrf_win.h │ │ ├── halrf.c │ │ ├── halrf.h │ │ ├── halrf_debug.c │ │ ├── halrf_debug.h │ │ ├── halrf_dpk.h │ │ ├── halrf_features.h │ │ ├── halrf_iqk.h │ │ ├── halrf_kfree.c │ │ ├── halrf_kfree.h │ │ ├── halrf_powertracking.c │ │ ├── halrf_powertracking.h │ │ ├── halrf_powertracking_ap.c │ │ ├── halrf_powertracking_ap.h │ │ ├── halrf_powertracking_ce.c │ │ ├── halrf_powertracking_ce.h │ │ ├── halrf_powertracking_iot.c │ │ ├── halrf_powertracking_iot.h │ │ ├── halrf_powertracking_win.c │ │ ├── halrf_powertracking_win.h │ │ ├── halrf_psd.c │ │ ├── halrf_psd.h │ │ ├── halrf_txgapcal.c │ │ ├── halrf_txgapcal.h │ │ └── rtl8821c │ │ │ ├── halhwimg8821c_rf.c │ │ │ ├── halhwimg8821c_rf.h │ │ │ ├── halrf_8821c.c │ │ │ ├── halrf_8821c.h │ │ │ ├── halrf_iqk_8821c.c │ │ │ ├── halrf_iqk_8821c.h │ │ │ └── version_rtl8821c_rf.h │ ├── mp_precomp.h │ ├── phydm.c │ ├── phydm.h │ ├── phydm.mk │ ├── phydm_adaptivity.c │ ├── phydm_adaptivity.h │ ├── phydm_adc_sampling.c │ ├── phydm_adc_sampling.h │ ├── phydm_antdect.c │ ├── phydm_antdect.h │ ├── phydm_antdiv.c │ ├── phydm_antdiv.h │ ├── phydm_api.c │ ├── phydm_api.h │ ├── phydm_auto_dbg.c │ ├── phydm_auto_dbg.h │ ├── phydm_beamforming.c │ ├── phydm_beamforming.h │ ├── phydm_cck_pd.c │ ├── phydm_cck_pd.h │ ├── phydm_cck_rx_pathdiv.c │ ├── phydm_cck_rx_pathdiv.h │ ├── phydm_ccx.c │ ├── phydm_ccx.h │ ├── phydm_cfotracking.c │ ├── phydm_cfotracking.h │ ├── phydm_debug.c │ ├── phydm_debug.h │ ├── phydm_dfs.c │ ├── phydm_dfs.h │ ├── phydm_dig.c │ ├── phydm_dig.h │ ├── phydm_direct_bf.c │ ├── phydm_direct_bf.h │ ├── phydm_dynamictxpower.c │ ├── phydm_dynamictxpower.h │ ├── phydm_features.h │ ├── phydm_features_ap.h │ ├── phydm_features_ce.h │ ├── phydm_features_ce2_kernel.h │ ├── phydm_features_iot.h │ ├── phydm_features_win.h │ ├── phydm_hwconfig.c │ ├── phydm_hwconfig.h │ ├── phydm_interface.c │ ├── phydm_interface.h │ ├── phydm_lna_sat.c │ ├── phydm_lna_sat.h │ ├── phydm_math_lib.c │ ├── phydm_math_lib.h │ ├── phydm_mp.c │ ├── phydm_mp.h │ ├── phydm_noisemonitor.c │ ├── phydm_noisemonitor.h │ ├── phydm_pathdiv.c │ ├── phydm_pathdiv.h │ ├── phydm_phystatus.c │ ├── phydm_phystatus.h │ ├── phydm_pmac_tx_setting.c │ ├── phydm_pmac_tx_setting.h │ ├── phydm_pow_train.c │ ├── phydm_pow_train.h │ ├── phydm_pre_define.h │ ├── phydm_precomp.h │ ├── phydm_primary_cca.c │ ├── phydm_primary_cca.h │ ├── phydm_psd.c │ ├── phydm_psd.h │ ├── phydm_rainfo.c │ ├── phydm_rainfo.h │ ├── phydm_reg.h │ ├── phydm_regdefine11ac.h │ ├── phydm_regdefine11n.h │ ├── phydm_regtable.h │ ├── phydm_rssi_monitor.c │ ├── phydm_rssi_monitor.h │ ├── phydm_smt_ant.c │ ├── phydm_smt_ant.h │ ├── phydm_soml.c │ ├── phydm_soml.h │ ├── phydm_types.h │ ├── rtl8821c │ │ ├── halhwimg8821c_bb.c │ │ ├── halhwimg8821c_bb.h │ │ ├── halhwimg8821c_mac.c │ │ ├── halhwimg8821c_mac.h │ │ ├── mp_precomp.h │ │ ├── phydm_hal_api8821c.c │ │ ├── phydm_hal_api8821c.h │ │ ├── phydm_regconfig8821c.c │ │ ├── phydm_regconfig8821c.h │ │ ├── phydm_rtl8821c.c │ │ ├── phydm_rtl8821c.h │ │ └── version_rtl8821c.h │ ├── sd4_phydm_2_kernel.mk │ └── txbf │ │ ├── halcomtxbf.c │ │ ├── halcomtxbf.h │ │ ├── haltxbf8192e.c │ │ ├── haltxbf8192e.h │ │ ├── haltxbf8814a.c │ │ ├── haltxbf8814a.h │ │ ├── haltxbf8822b.c │ │ ├── haltxbf8822b.h │ │ ├── haltxbfinterface.c │ │ ├── haltxbfinterface.h │ │ ├── haltxbfjaguar.c │ │ ├── haltxbfjaguar.h │ │ ├── phydm_hal_txbf_api.c │ │ └── phydm_hal_txbf_api.h └── rtl8821c │ ├── hal8821c_fw.c │ ├── hal8821c_fw.h │ ├── rtl8821c.h │ ├── rtl8821c_cmd.c │ ├── rtl8821c_dm.c │ ├── rtl8821c_halinit.c │ ├── rtl8821c_mac.c │ ├── rtl8821c_ops.c │ ├── rtl8821c_phy.c │ └── usb │ ├── rtl8821cu.h │ ├── rtl8821cu_halinit.c │ ├── rtl8821cu_halmac.c │ ├── rtl8821cu_io.c │ ├── rtl8821cu_led.c │ ├── rtl8821cu_ops.c │ ├── rtl8821cu_recv.c │ └── rtl8821cu_xmit.c ├── halmac.mk ├── include ├── Hal8188EPhyCfg.h ├── Hal8188EPhyReg.h ├── Hal8188EPwrSeq.h ├── Hal8188FPhyCfg.h ├── Hal8188FPhyReg.h ├── Hal8188FPwrSeq.h ├── Hal8192EPhyCfg.h ├── Hal8192EPhyReg.h ├── Hal8192EPwrSeq.h ├── Hal8192FPhyCfg.h ├── Hal8192FPhyReg.h ├── Hal8192FPwrSeq.h ├── Hal8703BPhyCfg.h ├── Hal8703BPhyReg.h ├── Hal8703BPwrSeq.h ├── Hal8710BPhyCfg.h ├── Hal8710BPhyReg.h ├── Hal8710BPwrSeq.h ├── Hal8723BPhyCfg.h ├── Hal8723BPhyReg.h ├── Hal8723BPwrSeq.h ├── Hal8723DPhyCfg.h ├── Hal8723DPhyReg.h ├── Hal8723DPwrSeq.h ├── Hal8723PwrSeq.h ├── Hal8812PhyCfg.h ├── Hal8812PhyReg.h ├── Hal8812PwrSeq.h ├── Hal8814PhyCfg.h ├── Hal8814PhyReg.h ├── Hal8814PwrSeq.h ├── Hal8821APwrSeq.h ├── HalPwrSeqCmd.h ├── HalVerDef.h ├── autoconf.h ├── basic_types.h ├── byteorder │ ├── big_endian.h │ ├── generic.h │ ├── little_endian.h │ ├── swab.h │ └── swabb.h ├── circ_buf.h ├── cmd_osdep.h ├── cmn_info │ └── rtw_sta_info.h ├── custom_gpio.h ├── drv_conf.h ├── drv_types.h ├── drv_types_ce.h ├── drv_types_gspi.h ├── drv_types_linux.h ├── drv_types_pci.h ├── drv_types_sdio.h ├── drv_types_xp.h ├── ethernet.h ├── gspi_hal.h ├── gspi_ops.h ├── gspi_ops_linux.h ├── gspi_osintf.h ├── h2clbk.h ├── hal_btcoex.h ├── hal_btcoex_wifionly.h ├── hal_com.h ├── hal_com_h2c.h ├── hal_com_led.h ├── hal_com_phycfg.h ├── hal_com_reg.h ├── hal_data.h ├── hal_gspi.h ├── hal_ic_cfg.h ├── hal_intf.h ├── hal_pg.h ├── hal_phy.h ├── hal_phy_reg.h ├── hal_sdio.h ├── hal_sdio_coex.h ├── ieee80211.h ├── ieee80211_ext.h ├── if_ether.h ├── ip.h ├── linux │ └── wireless.h ├── mlme_osdep.h ├── nic_spec.h ├── osdep_intf.h ├── osdep_service.h ├── osdep_service_bsd.h ├── osdep_service_ce.h ├── osdep_service_linux.h ├── osdep_service_xp.h ├── pci_hal.h ├── pci_ops.h ├── pci_osintf.h ├── recv_osdep.h ├── rtl8188e_cmd.h ├── rtl8188e_dm.h ├── rtl8188e_hal.h ├── rtl8188e_led.h ├── rtl8188e_recv.h ├── rtl8188e_rf.h ├── rtl8188e_spec.h ├── rtl8188e_sreset.h ├── rtl8188e_xmit.h ├── rtl8188f_cmd.h ├── rtl8188f_dm.h ├── rtl8188f_hal.h ├── rtl8188f_led.h ├── rtl8188f_recv.h ├── rtl8188f_rf.h ├── rtl8188f_spec.h ├── rtl8188f_sreset.h ├── rtl8188f_xmit.h ├── rtl8192e_cmd.h ├── rtl8192e_dm.h ├── rtl8192e_hal.h ├── rtl8192e_led.h ├── rtl8192e_recv.h ├── rtl8192e_rf.h ├── rtl8192e_spec.h ├── rtl8192e_sreset.h ├── rtl8192e_xmit.h ├── rtl8192f_cmd.h ├── rtl8192f_dm.h ├── rtl8192f_hal.h ├── rtl8192f_led.h ├── rtl8192f_recv.h ├── rtl8192f_rf.h ├── rtl8192f_spec.h ├── rtl8192f_sreset.h ├── rtl8192f_xmit.h ├── rtl8703b_cmd.h ├── rtl8703b_dm.h ├── rtl8703b_hal.h ├── rtl8703b_led.h ├── rtl8703b_recv.h ├── rtl8703b_rf.h ├── rtl8703b_spec.h ├── rtl8703b_sreset.h ├── rtl8703b_xmit.h ├── rtl8710b_cmd.h ├── rtl8710b_dm.h ├── rtl8710b_hal.h ├── rtl8710b_led.h ├── rtl8710b_lps_poff.h ├── rtl8710b_recv.h ├── rtl8710b_rf.h ├── rtl8710b_spec.h ├── rtl8710b_sreset.h ├── rtl8710b_xmit.h ├── rtl8723b_cmd.h ├── rtl8723b_dm.h ├── rtl8723b_hal.h ├── rtl8723b_led.h ├── rtl8723b_recv.h ├── rtl8723b_rf.h ├── rtl8723b_spec.h ├── rtl8723b_sreset.h ├── rtl8723b_xmit.h ├── rtl8723d_cmd.h ├── rtl8723d_dm.h ├── rtl8723d_hal.h ├── rtl8723d_led.h ├── rtl8723d_lps_poff.h ├── rtl8723d_recv.h ├── rtl8723d_rf.h ├── rtl8723d_spec.h ├── rtl8723d_sreset.h ├── rtl8723d_xmit.h ├── rtl8723f_hal.h ├── rtl8723fs_hal.h ├── rtl8723fu_hal.h ├── rtl8812a_cmd.h ├── rtl8812a_dm.h ├── rtl8812a_hal.h ├── rtl8812a_led.h ├── rtl8812a_recv.h ├── rtl8812a_rf.h ├── rtl8812a_spec.h ├── rtl8812a_sreset.h ├── rtl8812a_xmit.h ├── rtl8814a_cmd.h ├── rtl8814a_dm.h ├── rtl8814a_hal.h ├── rtl8814a_led.h ├── rtl8814a_recv.h ├── rtl8814a_rf.h ├── rtl8814a_spec.h ├── rtl8814a_sreset.h ├── rtl8814a_xmit.h ├── rtl8814b_hal.h ├── rtl8814be_hal.h ├── rtl8814bu_hal.h ├── rtl8821a_spec.h ├── rtl8821a_xmit.h ├── rtl8821c_dm.h ├── rtl8821c_hal.h ├── rtl8821c_spec.h ├── rtl8821ce_hal.h ├── rtl8821cs_hal.h ├── rtl8821cu_hal.h ├── rtl8822b_hal.h ├── rtl8822be_hal.h ├── rtl8822bs_hal.h ├── rtl8822bu_hal.h ├── rtl8822c_hal.h ├── rtl8822ce_hal.h ├── rtl8822cs_hal.h ├── rtl8822cu_hal.h ├── rtw_android.h ├── rtw_ap.h ├── rtw_beamforming.h ├── rtw_br_ext.h ├── rtw_bt_mp.h ├── rtw_btcoex.h ├── rtw_btcoex_wifionly.h ├── rtw_byteorder.h ├── rtw_cmd.h ├── rtw_debug.h ├── rtw_eeprom.h ├── rtw_efuse.h ├── rtw_event.h ├── rtw_ft.h ├── rtw_ht.h ├── rtw_io.h ├── rtw_ioctl.h ├── rtw_ioctl_query.h ├── rtw_ioctl_set.h ├── rtw_iol.h ├── rtw_mbo.h ├── rtw_mcc.h ├── rtw_mem.h ├── rtw_mi.h ├── rtw_mlme.h ├── rtw_mlme_ext.h ├── rtw_mp.h ├── rtw_mp_phy_regdef.h ├── rtw_odm.h ├── rtw_p2p.h ├── rtw_pwrctrl.h ├── rtw_qos.h ├── rtw_recv.h ├── rtw_rf.h ├── rtw_rm.h ├── rtw_rm_fsm.h ├── rtw_rm_util.h ├── rtw_roch.h ├── rtw_rson.h ├── rtw_sdio.h ├── rtw_security.h ├── rtw_sreset.h ├── rtw_swcrypto.h ├── rtw_tdls.h ├── rtw_version.h ├── rtw_vht.h ├── rtw_wapi.h ├── rtw_wnm.h ├── rtw_xmit.h ├── sdio_hal.h ├── sdio_ops.h ├── sdio_ops_ce.h ├── sdio_ops_linux.h ├── sdio_ops_xp.h ├── sdio_osintf.h ├── sta_info.h ├── usb_hal.h ├── usb_ops.h ├── usb_ops_linux.h ├── usb_osintf.h ├── usb_vendor_req.h ├── wifi.h ├── wlan_bssdef.h └── xmit_osdep.h ├── install-driver.sh ├── os_dep ├── linux │ ├── custom_gpio_linux.c │ ├── ioctl_cfg80211.c │ ├── ioctl_cfg80211.h │ ├── ioctl_linux.c │ ├── ioctl_mp.c │ ├── mlme_linux.c │ ├── nlrtw.c │ ├── nlrtw.h │ ├── os_intfs.c │ ├── recv_linux.c │ ├── rhashtable.c │ ├── rhashtable.h │ ├── rtw_android.c │ ├── rtw_cfgvendor.c │ ├── rtw_cfgvendor.h │ ├── rtw_proc.c │ ├── rtw_proc.h │ ├── rtw_rhashtable.c │ ├── rtw_rhashtable.h │ ├── usb_intf.c │ ├── usb_ops_linux.c │ ├── wifi_regd.c │ ├── wifi_regd.h │ └── xmit_linux.c └── osdep_service.c ├── platform ├── custom_country_chplan.h ├── platform_ARM_SUN50IW1P1_sdio.c ├── platform_ARM_SUNnI_sdio.c ├── platform_ARM_SUNxI_sdio.c ├── platform_ARM_SUNxI_usb.c ├── platform_ARM_WMT_sdio.c ├── platform_RTK_DMP_usb.c ├── platform_aml_s905_sdio.c ├── platform_aml_s905_sdio.h ├── platform_arm_act_sdio.c ├── platform_hisilicon_hi3798_sdio.c ├── platform_hisilicon_hi3798_sdio.h ├── platform_ops.c ├── platform_ops.h ├── platform_sprd_sdio.c ├── platform_zte_zx296716_sdio.c └── platform_zte_zx296716_sdio.h ├── remove-driver.sh ├── rtl8821c.mk └── supported-device-IDs /.gitignore: -------------------------------------------------------------------------------- 1 | *.o 2 | *.cmd 3 | *.ko 4 | *.mod 5 | *.mod.c 6 | Module.symvers 7 | modules.order 8 | -------------------------------------------------------------------------------- /Kconfig: -------------------------------------------------------------------------------- 1 | config RTL8821CU 2 | tristate "Realtek 8821C USB WiFi" 3 | depends on USB 4 | help 5 | Help message of RTL8821CU 6 | 7 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2023 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | -------------------------------------------------------------------------------- /core/crypto/aes-ctr.c: -------------------------------------------------------------------------------- 1 | /* 2 | * AES-128/192/256 CTR 3 | * 4 | * Copyright (c) 2003-2007, Jouni Malinen 5 | * 6 | * This software may be distributed under the terms of the BSD license. 7 | * See README for more details. 8 | */ 9 | 10 | #include "rtw_crypto_wrap.h" 11 | 12 | #include "aes.h" 13 | #include "aes_wrap.h" 14 | 15 | /** 16 | * aes_ctr_encrypt - AES-128/192/256 CTR mode encryption 17 | * @key: Key for encryption (key_len bytes) 18 | * @key_len: Length of the key (16, 24, or 32 bytes) 19 | * @nonce: Nonce for counter mode (16 bytes) 20 | * @data: Data to encrypt in-place 21 | * @data_len: Length of data in bytes 22 | * Returns: 0 on success, -1 on failure 23 | */ 24 | int aes_ctr_encrypt(const u8 *key, size_t key_len, const u8 *nonce, 25 | u8 *data, size_t data_len) 26 | { 27 | void *ctx; 28 | size_t j, len, left = data_len; 29 | int i; 30 | u8 *pos = data; 31 | u8 counter[AES_BLOCK_SIZE], buf[AES_BLOCK_SIZE]; 32 | 33 | ctx = aes_encrypt_init(key, key_len); 34 | if (ctx == NULL) 35 | return -1; 36 | os_memcpy(counter, nonce, AES_BLOCK_SIZE); 37 | 38 | while (left > 0) { 39 | aes_encrypt(ctx, counter, buf); 40 | 41 | len = (left < AES_BLOCK_SIZE) ? left : AES_BLOCK_SIZE; 42 | for (j = 0; j < len; j++) 43 | pos[j] ^= buf[j]; 44 | pos += len; 45 | left -= len; 46 | 47 | for (i = AES_BLOCK_SIZE - 1; i >= 0; i--) { 48 | counter[i]++; 49 | if (counter[i]) 50 | break; 51 | } 52 | } 53 | aes_encrypt_deinit(ctx); 54 | return 0; 55 | } 56 | 57 | 58 | /** 59 | * aes_128_ctr_encrypt - AES-128 CTR mode encryption 60 | * @key: Key for encryption (key_len bytes) 61 | * @nonce: Nonce for counter mode (16 bytes) 62 | * @data: Data to encrypt in-place 63 | * @data_len: Length of data in bytes 64 | * Returns: 0 on success, -1 on failure 65 | */ 66 | int aes_128_ctr_encrypt(const u8 *key, const u8 *nonce, 67 | u8 *data, size_t data_len) 68 | { 69 | return aes_ctr_encrypt(key, 16, nonce, data, data_len); 70 | } 71 | -------------------------------------------------------------------------------- /core/crypto/aes.h: -------------------------------------------------------------------------------- 1 | /* 2 | * AES functions 3 | * Copyright (c) 2003-2006, Jouni Malinen 4 | * 5 | * This software may be distributed under the terms of the BSD license. 6 | * See README for more details. 7 | */ 8 | 9 | #ifndef AES_H 10 | #define AES_H 11 | 12 | #define AES_BLOCK_SIZE 16 13 | 14 | void * aes_encrypt_init(const u8 *key, size_t len); 15 | int aes_encrypt(void *ctx, const u8 *plain, u8 *crypt); 16 | void aes_encrypt_deinit(void *ctx); 17 | void * aes_decrypt_init(const u8 *key, size_t len); 18 | int aes_decrypt(void *ctx, const u8 *crypt, u8 *plain); 19 | void aes_decrypt_deinit(void *ctx); 20 | 21 | #endif /* AES_H */ 22 | -------------------------------------------------------------------------------- /core/crypto/aes_siv.h: -------------------------------------------------------------------------------- 1 | /* 2 | * AES SIV (RFC 5297) 3 | * Copyright (c) 2013 Cozybit, Inc. 4 | * 5 | * This software may be distributed under the terms of the BSD license. 6 | * See README for more details. 7 | */ 8 | 9 | #ifndef AES_SIV_H 10 | #define AES_SIV_H 11 | 12 | int aes_siv_encrypt(const u8 *key, size_t key_len, 13 | const u8 *pw, size_t pwlen, 14 | size_t num_elem, const u8 *addr[], const size_t *len, 15 | u8 *out); 16 | int aes_siv_decrypt(const u8 *key, size_t key_len, 17 | const u8 *iv_crypt, size_t iv_c_len, 18 | size_t num_elem, const u8 *addr[], const size_t *len, 19 | u8 *out); 20 | 21 | #endif /* AES_SIV_H */ 22 | -------------------------------------------------------------------------------- /core/crypto/rtw_crypto_wrap.c: -------------------------------------------------------------------------------- 1 | #include "rtw_crypto_wrap.h" 2 | 3 | #ifndef DEBUG_CRYPTO 4 | #define DEBUG_CRYPTO 0 5 | #endif /* DEBUG_CRYTO */ 6 | 7 | int os_memcmp(const void *s1, const void *s2, size_t n) 8 | { 9 | return _rtw_memcmp2(s1, s2, n); 10 | } 11 | 12 | int os_memcmp_const(const void *a, const void *b, size_t len) 13 | { 14 | const u8 *aa = a; 15 | const u8 *bb = b; 16 | size_t i; 17 | u8 res; 18 | 19 | for (res = 0, i = 0; i < len; i++) 20 | res |= aa[i] ^ bb[i]; 21 | 22 | return res; 23 | } 24 | 25 | void* os_memdup(const void *src, u32 sz) 26 | { 27 | void *r = rtw_malloc(sz); 28 | 29 | if (r && src) 30 | _rtw_memcpy(r, src, sz); 31 | return r; 32 | } 33 | 34 | size_t os_strlen(const char *s) 35 | { 36 | const char *p = s; 37 | while (*p) 38 | p++; 39 | return p - s; 40 | } 41 | 42 | 43 | void forced_memzero(void *ptr, size_t len) 44 | { 45 | _rtw_memset(ptr, 0, len); 46 | } 47 | 48 | void bin_clear_free(void *bin, size_t len) 49 | { 50 | if (bin) { 51 | forced_memzero(bin, len); 52 | rtw_mfree(bin, len); 53 | } 54 | } 55 | 56 | void wpa_printf(int level, const char *fmt, ...) 57 | { 58 | #if DEBUG_CRYPTO 59 | #define MSG_LEN 100 60 | va_list args; 61 | u8 buf[MSG_LEN] = { 0 }; 62 | int err; 63 | 64 | va_start(args, fmt); 65 | err = vsnprintf(buf, MSG_LEN, fmt, args); 66 | va_end(args); 67 | 68 | RTW_INFO("%s", buf); 69 | #undef MSG_LEN 70 | #endif /* DEBUG_CRYPTO */ 71 | } 72 | 73 | void wpa_hexdump(int level, const char *title, const void *buf, size_t len) 74 | { 75 | #if DEBUG_CRYPTO 76 | RTW_INFO_DUMP((u8 *)title, buf, len); 77 | #endif /* DEBUG_CRYPTO */ 78 | } 79 | 80 | void wpa_hexdump_key(int level, const char *title, const void *buf, size_t len) 81 | { 82 | #if DEBUG_CRYPTO 83 | RTW_INFO_DUMP((u8 *)title, buf, len); 84 | #endif /* DEBUG_CRYPTO */ 85 | } 86 | -------------------------------------------------------------------------------- /core/crypto/rtw_crypto_wrap.h: -------------------------------------------------------------------------------- 1 | #ifndef RTW_CRYTO_WRAP_H 2 | #define RTW_CRYTO_WRAP_H 3 | 4 | #include 5 | 6 | #define TEST_FAIL() 0 7 | 8 | #define os_memset _rtw_memset 9 | #define os_memcpy _rtw_memcpy 10 | #define os_malloc rtw_malloc 11 | 12 | #define le_to_host16 le16_to_cpu 13 | #define host_to_le16 cpu_to_le16 14 | 15 | #define WPA_PUT_LE16 RTW_PUT_LE16 16 | #define WPA_GET_LE16 RTW_GET_LE16 17 | #define WPA_PUT_LE32 RTW_PUT_LE32 18 | #define WPA_GET_LE32 RTW_GET_LE32 19 | #define WPA_PUT_LE64 RTW_PUT_LE64 20 | #define WPA_GET_LE64 RTW_GET_LE64 21 | #define WPA_PUT_BE16 RTW_PUT_BE16 22 | #define WPA_GET_BE16 RTW_GET_BE16 23 | #define WPA_PUT_BE32 RTW_PUT_BE32 24 | #define WPA_GET_BE32 RTW_GET_BE32 25 | #define WPA_PUT_BE64 RTW_PUT_BE64 26 | #define WPA_GET_BE64 RTW_GET_BE64 27 | 28 | #ifndef MAC2STR 29 | #define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] 30 | #define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" 31 | #endif 32 | 33 | #define WLAN_FC_PVER 0x0003 34 | #define WLAN_FC_TODS 0x0100 35 | #define WLAN_FC_FROMDS 0x0200 36 | #define WLAN_FC_MOREFRAG 0x0400 37 | #define WLAN_FC_RETRY 0x0800 38 | #define WLAN_FC_PWRMGT 0x1000 39 | #define WLAN_FC_MOREDATA 0x2000 40 | #define WLAN_FC_ISWEP 0x4000 41 | #define WLAN_FC_ORDER 0x8000 42 | 43 | #define WLAN_FC_TYPE_DATA RTW_IEEE80211_FTYPE_DATA 44 | #define WLAN_FC_TYPE_MGMT RTW_IEEE80211_FTYPE_MGMT 45 | 46 | #define WLAN_FC_STYPE_QOS_DATA RTW_IEEE80211_STYPE_QOS_DATA 47 | 48 | enum { 49 | _MSG_EXCESSIVE_, _MSG_MSGDUMP_, _MSG_DEBUG_, _MSG_INFO_, _MSG_WARNING_, _MSG_ERROR_ 50 | }; 51 | 52 | int os_memcmp(const void *s1, const void *s2, size_t n); 53 | int os_memcmp_const(const void *a, const void *b, size_t len); 54 | void* os_memdup(const void *src, u32 sz); 55 | size_t os_strlen(const char *s); 56 | 57 | void forced_memzero(void *ptr, size_t len); 58 | void bin_clear_free(void *bin, size_t len); 59 | 60 | void wpa_printf(int level, const char *fmt, ...); 61 | void wpa_hexdump(int level, const char *title, const void *buf, size_t len); 62 | void wpa_hexdump_key(int level, const char *title, const void *buf, size_t len); 63 | 64 | #endif /* RTW_CRYTO_WRAP_H */ 65 | -------------------------------------------------------------------------------- /core/crypto/sha256.h: -------------------------------------------------------------------------------- 1 | /* 2 | * SHA256 hash implementation and interface functions 3 | * Copyright (c) 2003-2016, Jouni Malinen 4 | * 5 | * This software may be distributed under the terms of the BSD license. 6 | * See README for more details. 7 | */ 8 | 9 | #ifndef SHA256_H 10 | #define SHA256_H 11 | 12 | #define SHA256_MAC_LEN 32 13 | 14 | int hmac_sha256_vector(const u8 *key, size_t key_len, size_t num_elem, 15 | const u8 *addr[], const size_t *len, u8 *mac); 16 | int hmac_sha256(const u8 *key, size_t key_len, const u8 *data, 17 | size_t data_len, u8 *mac); 18 | int sha256_prf(const u8 *key, size_t key_len, const char *label, 19 | const u8 *data, size_t data_len, u8 *buf, size_t buf_len); 20 | int sha256_prf_bits(const u8 *key, size_t key_len, const char *label, 21 | const u8 *data, size_t data_len, u8 *buf, 22 | size_t buf_len_bits); 23 | void tls_prf_sha256(const u8 *secret, size_t secret_len, 24 | const char *label, const u8 *seed, size_t seed_len, 25 | u8 *out, size_t outlen); 26 | int hmac_sha256_kdf(const u8 *secret, size_t secret_len, 27 | const char *label, const u8 *seed, size_t seed_len, 28 | u8 *out, size_t outlen); 29 | 30 | #endif /* SHA256_H */ 31 | -------------------------------------------------------------------------------- /core/crypto/sha256_i.h: -------------------------------------------------------------------------------- 1 | /* 2 | * SHA-256 internal definitions 3 | * Copyright (c) 2003-2011, Jouni Malinen 4 | * 5 | * This software may be distributed under the terms of the BSD license. 6 | * See README for more details. 7 | */ 8 | 9 | #ifndef SHA256_I_H 10 | #define SHA256_I_H 11 | 12 | #define SHA256_BLOCK_SIZE 64 13 | 14 | struct _sha256_state { 15 | u64 length; 16 | u32 state[8], curlen; 17 | u8 buf[SHA256_BLOCK_SIZE]; 18 | }; 19 | 20 | void _sha256_init(struct _sha256_state *md); 21 | int sha256_process(struct _sha256_state *md, const unsigned char *in, 22 | unsigned long inlen); 23 | int sha256_done(struct _sha256_state *md, unsigned char *out); 24 | 25 | #endif /* SHA256_I_H */ 26 | -------------------------------------------------------------------------------- /core/crypto/wlancrypto_wrap.h: -------------------------------------------------------------------------------- 1 | /* 2 | * wlantest - IEEE 802.11 protocol monitoring and testing tool 3 | * Copyright (c) 2010-2013, Jouni Malinen 4 | * 5 | * This software may be distributed under the terms of the BSD license. 6 | * See README for more details. 7 | */ 8 | 9 | #ifndef WLANCRYPTO_WRAP_H 10 | #define WLANCRYPTO_WRAP_H 11 | 12 | int sha256_vector(size_t num_elem, const u8 *addr[], const size_t *len, 13 | u8 *mac); 14 | 15 | u8* ccmp_decrypt(_adapter *padapter, const u8 *tk, const struct ieee80211_hdr *hdr, 16 | const u8 *data, size_t data_len, size_t *decrypted_len); 17 | u8* ccmp_encrypt(_adapter *padapter, const u8 *tk, u8 *frame, size_t len, size_t hdrlen, u8 *qos, 18 | u8 *pn, int keyid, size_t *encrypted_len); 19 | u8* ccmp_encrypt_pv1(const u8 *tk, const u8 *a1, const u8 *a2, const u8 *a3, 20 | const u8 *frame, size_t len, 21 | size_t hdrlen, const u8 *pn, int keyid, 22 | size_t *encrypted_len); 23 | u8* ccmp_256_decrypt(_adapter *padapter, const u8 *tk, const struct ieee80211_hdr *hdr, 24 | const u8 *data, size_t data_len, size_t *decrypted_len); 25 | u8* ccmp_256_encrypt(_adapter *padapter, const u8 *tk, u8 *frame, size_t len, size_t hdrlen, 26 | u8 *qos, u8 *pn, int keyid, size_t *encrypted_len); 27 | 28 | u8* gcmp_decrypt(_adapter *padapter, const u8 *tk, size_t tk_len, const struct ieee80211_hdr *hdr, 29 | const u8 *data, size_t data_len, size_t *decrypted_len); 30 | u8* gcmp_encrypt(_adapter *padapter, const u8 *tk, size_t tk_len, const u8 *frame, size_t len, 31 | size_t hdrlen, const u8 *qos, 32 | const u8 *pn, int keyid, size_t *encrypted_len); 33 | 34 | #endif /* WLANCRYPTO_WRAP_H */ 35 | -------------------------------------------------------------------------------- /core/monitor/rtw_radiotap.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTW_RADIOTAP_H_ 16 | #define __RTW_RADIOTAP_H_ 17 | 18 | struct mon_reg_backup { 19 | /* flags */ 20 | u8 known_rcr:1; 21 | u8 known_drvinfo:1; 22 | u8 known_rxfilter:1; 23 | u8 known_misc0:1; 24 | /* data */ 25 | u8 drvinfo; 26 | u16 rxfilter0; 27 | u16 rxfilter1; 28 | u16 rxfilter2; 29 | u32 rcr; 30 | u32 misc0; 31 | }; 32 | 33 | struct moinfo { 34 | union { 35 | struct { 36 | u32 sgi:1; 37 | u32 ldpc:1; 38 | u32 stbc:2; 39 | u32 not_sounding:1; 40 | u32 ofdm_bw:2; 41 | u32 vht_group_id:2; 42 | u32 vht_nsts_aid:12; 43 | u32 vht_txop_not_allow:1; 44 | u32 vht_nsym_dis:1; 45 | u32 vht_ldpc_extra:1; 46 | u32 vht_su_mcs:12; 47 | u32 vht_beamformed:1; 48 | }snif_info; 49 | 50 | struct { 51 | u32 A; 52 | u32 B; 53 | u32 C; 54 | }plcp_info; 55 | }u; 56 | }; 57 | 58 | sint rtw_fill_radiotap_hdr(_adapter *padapter, struct rx_pkt_attrib *a, u8 *buf); 59 | 60 | void rx_query_moinfo(struct rx_pkt_attrib *a, u8 *desc); 61 | 62 | #endif /* __RTW_RADIOTAP_H_ */ 63 | 64 | -------------------------------------------------------------------------------- /core/rtw_btcoex_wifionly.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #include 16 | #include 17 | #include 18 | 19 | void rtw_btcoex_wifionly_switchband_notify(PADAPTER padapter) 20 | { 21 | hal_btcoex_wifionly_switchband_notify(padapter); 22 | } 23 | 24 | void rtw_btcoex_wifionly_scan_notify(PADAPTER padapter) 25 | { 26 | hal_btcoex_wifionly_scan_notify(padapter); 27 | } 28 | 29 | void rtw_btcoex_wifionly_connect_notify(PADAPTER padapter) 30 | { 31 | hal_btcoex_wifionly_connect_notify(padapter); 32 | } 33 | 34 | void rtw_btcoex_wifionly_hw_config(PADAPTER padapter) 35 | { 36 | hal_btcoex_wifionly_hw_config(padapter); 37 | } 38 | 39 | void rtw_btcoex_wifionly_initialize(PADAPTER padapter) 40 | { 41 | hal_btcoex_wifionly_initlizevariables(padapter); 42 | } 43 | 44 | void rtw_btcoex_wifionly_AntInfoSetting(PADAPTER padapter) 45 | { 46 | hal_btcoex_wifionly_AntInfoSetting(padapter); 47 | } 48 | -------------------------------------------------------------------------------- /core/rtw_ioctl_query.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #define _RTW_IOCTL_QUERY_C_ 16 | 17 | #include 18 | 19 | 20 | -------------------------------------------------------------------------------- /default-editor.txt: -------------------------------------------------------------------------------- 1 | nano 2 | -------------------------------------------------------------------------------- /dkms-make.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | # Warning: Do not run this script in a terminal. It is designed to be 4 | # run from another script. 5 | 6 | # SMEM needs to be set here if dkms build is not initiated by install-driver.sh 7 | SMEM=$(LC_ALL=C free | awk '/Mem:/ { print $2 }') 8 | 9 | # sproc needs to be set here if dkms build is not initiated by install-driver.sh 10 | sproc=$(nproc) 11 | 12 | # avoid Out of Memory condition in low-RAM systems by limiting core usage 13 | if [ "$sproc" -gt 1 ]; then 14 | if [ "$SMEM" -lt 1400000 ]; then 15 | sproc=2 16 | fi 17 | if [ "$SMEM" -lt 700000 ]; then 18 | sproc=1 19 | fi 20 | fi 21 | 22 | kernelver=${kernelver:-$(uname -r)} 23 | make "-j$sproc" "KVER=$kernelver" "KSRC=/lib/modules/$kernelver/build" 24 | -------------------------------------------------------------------------------- /dkms.conf: -------------------------------------------------------------------------------- 1 | PACKAGE_NAME="rtl8821cu" 2 | PACKAGE_VERSION="5.12.0.4" 3 | BUILT_MODULE_NAME[0]="8821cu" 4 | MAKE="kernelver=$kernelver ./dkms-make.sh" 5 | CLEAN="'make' clean" 6 | DEST_MODULE_LOCATION[0]="/updates/dkms" 7 | AUTOINSTALL="yes" 8 | -------------------------------------------------------------------------------- /docs/Guides/00-README_1ST: -------------------------------------------------------------------------------- 1 | 2023-01-02 2 | 3 | The guides provided in this folder were provided by Realtek in the driver 4 | distribution. Use CAUTION with these guides as many have not been updated 5 | as changes have taken place in the Linux econsystem over the last few years. 6 | 7 | DO NOT use these guides without confirming with recent information that the 8 | information is correct. Linux changes and improves over time but old, 9 | outdated information hangs around. My recommendation is that you set your 10 | search engine to provide links that are one year old or less so as to 11 | weed out old outdated information. 12 | 13 | Regards, 14 | 15 | Nick 16 | -------------------------------------------------------------------------------- /docs/Guides/HowTo_enable_and_verify_TDLS_function_in_Wi-Fi_driver.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/HowTo_enable_and_verify_TDLS_function_in_Wi-Fi_driver.pdf -------------------------------------------------------------------------------- /docs/Guides/HowTo_enable_the_power_saving_functionality.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/HowTo_enable_the_power_saving_functionality.pdf -------------------------------------------------------------------------------- /docs/Guides/HowTo_support_WIFI_certification_test.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/HowTo_support_WIFI_certification_test.pdf -------------------------------------------------------------------------------- /docs/Guides/HowTo_support_more_VidPids.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/HowTo_support_more_VidPids.pdf -------------------------------------------------------------------------------- /docs/Guides/How_to_append_vendor_specific_ie_to_driver_management_frames.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/How_to_append_vendor_specific_ie_to_driver_management_frames.pdf -------------------------------------------------------------------------------- /docs/Guides/How_to_enable_Realtek_RSON_function.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/How_to_enable_Realtek_RSON_function.pdf -------------------------------------------------------------------------------- /docs/Guides/How_to_set_driver_debug_log_level.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/How_to_set_driver_debug_log_level.pdf -------------------------------------------------------------------------------- /docs/Guides/Miracast_for_Realtek_WiFi.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Miracast_for_Realtek_WiFi.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_Adaptivity_and_Carrier_Sensing_Test.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_Adaptivity_and_Carrier_Sensing_Test.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_Bridge.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_Bridge.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_Driver_Compilation_and_Installation.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_Driver_Compilation_and_Installation.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_SoftAP.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_SoftAP.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_Station_Mode.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_Station_Mode.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_WOW.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_WOW.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_WPA3.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_WPA3.pdf -------------------------------------------------------------------------------- /docs/Guides/Quick_Start_Guide_for_wpa_supplicant_WiFi_P2P_test.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Quick_Start_Guide_for_wpa_supplicant_WiFi_P2P_test.pdf -------------------------------------------------------------------------------- /docs/Guides/RTK_P2P_WFD_Programming_guide.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/RTK_P2P_WFD_Programming_guide.pdf -------------------------------------------------------------------------------- /docs/Guides/Realtek_WiFi_concurrent_mode_Introduction.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Realtek_WiFi_concurrent_mode_Introduction.pdf -------------------------------------------------------------------------------- /docs/Guides/SoftAP_Mode_features.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/SoftAP_Mode_features.pdf -------------------------------------------------------------------------------- /docs/Guides/Wireless_tools_porting_guide.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/Wireless_tools_porting_guide.pdf -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_10.x/Realtek_Wi-Fi_SDK_for_Android_10.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_10.x/Realtek_Wi-Fi_SDK_for_Android_10.pdf -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_10.x/realtek_wifi_SDK_for_android_10_x_20200505.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_10.x/realtek_wifi_SDK_for_android_10_x_20200505.tar.gz -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_10.x/supplicant_overlay_config.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_10.x/supplicant_overlay_config.tar.gz -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_10.x/wpa_supplicant_8_10.x_rtw_29226.20200409.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_10.x/wpa_supplicant_8_10.x_rtw_29226.20200409.tar.gz -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_11.x/Realtek_Wi-Fi_SDK_for_Android_11.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_11.x/Realtek_Wi-Fi_SDK_for_Android_11.pdf -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_11.x/realtek_wifi_SDK_for_android_11_x_20210416.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_11.x/realtek_wifi_SDK_for_android_11_x_20210416.tar.gz -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_11.x/supplicant_overlay_config.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_11.x/supplicant_overlay_config.tar.gz -------------------------------------------------------------------------------- /docs/Guides/android_ref_codes_11.x/wpa_supplicant_8_11.0.0.r3_rtw_20201005.tar.gz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/android_ref_codes_11.x/wpa_supplicant_8_11.0.0.r3_rtw_20201005.tar.gz -------------------------------------------------------------------------------- /docs/Guides/btcoex/HowTo_debug_BT_coexistence.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/btcoex/HowTo_debug_BT_coexistence.pdf -------------------------------------------------------------------------------- /docs/Guides/btcoex/script/btcoex_lnx.sh: -------------------------------------------------------------------------------- 1 | # How To 2 | # ./btcoex_lnx.sh [CHIP] [WLan Interface] [Log File] 3 | #!/bin/sh 4 | 5 | BTDBG=0 6 | 7 | CHIP=$1 8 | if test -z $CHIP 9 | then 10 | CHIP=rtl8723bs 11 | fi 12 | 13 | INTF=$2 14 | if test -z $INTF 15 | then 16 | INTF=wlan0 17 | fi 18 | 19 | PROC_BTCOEX_PATH=/proc/net/$CHIP/$INTF/btcoex 20 | 21 | LOG_FILE=$3 22 | if test -z $LOG_FILE 23 | then 24 | LOG_FILE=btcoex.log 25 | fi 26 | 27 | if test -f $LOG_FILE 28 | then 29 | touch $LOG_FILE 30 | fi 31 | 32 | if [ $BTDBG -ne 0 ]; then 33 | HCIDUMP_FILE=btcoex_hcidump.cfa 34 | if test -f $HCIDUMP_FILE 35 | then 36 | rm -rf $HCIDUMP_FILE 37 | fi 38 | hcidump -w $HCIDUMP_FILE & 39 | fi 40 | 41 | while true 42 | do 43 | cat $PROC_BTCOEX_PATH >> $LOG_FILE 44 | echo "" >> $LOG_FILE 45 | if [ $BTDBG -ne 0 ]; then 46 | hciconfig pageparms >> $LOG_FILE 47 | echo "" >> $LOG_FILE 48 | hciconfig inqparams >> $LOG_FILE 49 | fi 50 | sleep 2 51 | done 52 | 53 | -------------------------------------------------------------------------------- /docs/Guides/btcoex/script/btcoex_win.bat: -------------------------------------------------------------------------------- 1 | @echo off 2 | set AndroidADB=adb.exe 3 | set dbgfile=/proc/net/rtl8723bs/wlan0/btcoex 4 | 5 | %AndroidADB% shell cat %dbgfile% 6 | %AndroidADB% shell date > Coex_Dbg.log 7 | %AndroidADB% shell cat %dbgfile% > Coex_Dbg.log 8 | %AndroidADB% shell echo -e '\n\n\n' > Coex_Dbg.log 9 | 10 | :loop 11 | cls 12 | %AndroidADB% shell cat %dbgfile% 13 | %AndroidADB% shell date >> Coex_Dbg.log 14 | %AndroidADB% shell cat %dbgfile% >> Coex_Dbg.log 15 | %AndroidADB% shell echo -e '\n\n\n' >> Coex_Dbg.log 16 | rem timeout /t 2 || goto end 17 | ping 1.1.1.1 -n 1 -w 2000 > nul 18 | goto loop 19 | -------------------------------------------------------------------------------- /docs/Guides/wpa_cli_with_wpa_supplicant.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/Guides/wpa_cli_with_wpa_supplicant.pdf -------------------------------------------------------------------------------- /docs/ReleaseNotes.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/morrownr/8821cu-20210916/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152/docs/ReleaseNotes.pdf -------------------------------------------------------------------------------- /hal/btc/btc_basic_types.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __BTC_BASIC_TYPES_H__ 16 | #define __BTC_BASIC_TYPES_H__ 17 | 18 | #define IN 19 | #define OUT 20 | #define VOID void 21 | typedef void *PVOID; 22 | 23 | #define u1Byte u8 24 | #define pu1Byte u8* 25 | 26 | #define u2Byte u16 27 | #define pu2Byte u16* 28 | 29 | #define u4Byte u32 30 | #define pu4Byte u32* 31 | 32 | #define u8Byte u64 33 | #define pu8Byte u64* 34 | 35 | #define s1Byte s8 36 | #define ps1Byte s8* 37 | 38 | #define s2Byte s16 39 | #define ps2Byte s16* 40 | 41 | #define s4Byte s32 42 | #define ps4Byte s32* 43 | 44 | #define s8Byte s64 45 | #define ps8Byte s64* 46 | 47 | #define UCHAR u8 48 | #define USHORT u16 49 | #define UINT u32 50 | #define ULONG u32 51 | #define PULONG u32* 52 | 53 | #endif /* __BTC_BASIC_TYPES_H__ */ 54 | -------------------------------------------------------------------------------- /hal/efuse/rtl8821c/HalEfuseMask8821C_PCIE.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | 17 | 18 | /****************************************************************************** 19 | * MPCIE.TXT 20 | ******************************************************************************/ 21 | 22 | 23 | u16 24 | EFUSE_GetArrayLen_MP_8821C_MPCIE(void); 25 | 26 | void 27 | EFUSE_GetMaskArray_MP_8821C_MPCIE( 28 | u8 *Array 29 | ); 30 | 31 | BOOLEAN 32 | EFUSE_IsAddressMasked_MP_8821C_MPCIE(/* TC: Test Chip, MP: MP Chip */ 33 | u16 Offset 34 | ); 35 | -------------------------------------------------------------------------------- /hal/efuse/rtl8821c/HalEfuseMask8821C_SDIO.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | 17 | 18 | /****************************************************************************** 19 | * MSDIO.TXT 20 | ******************************************************************************/ 21 | 22 | 23 | u16 24 | EFUSE_GetArrayLen_MP_8821C_MSDIO(void); 25 | 26 | void 27 | EFUSE_GetMaskArray_MP_8821C_MSDIO( 28 | u8 *Array 29 | ); 30 | 31 | BOOLEAN 32 | EFUSE_IsAddressMasked_MP_8821C_MSDIO(/* TC: Test Chip, MP: MP Chip */ 33 | u16 Offset 34 | ); 35 | -------------------------------------------------------------------------------- /hal/efuse/rtl8821c/HalEfuseMask8821C_USB.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | 17 | 18 | /****************************************************************************** 19 | * MUSB.TXT 20 | ******************************************************************************/ 21 | 22 | 23 | u16 24 | EFUSE_GetArrayLen_MP_8821C_MUSB(void); 25 | 26 | void 27 | EFUSE_GetMaskArray_MP_8821C_MUSB( 28 | u8 *Array 29 | ); 30 | 31 | BOOLEAN 32 | EFUSE_IsAddressMasked_MP_8821C_MUSB(/* TC: Test Chip, MP: MP Chip */ 33 | u16 Offset 34 | ); 35 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_cfg_wmac_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2017 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_CFG_WMAC_8821C_H_ 17 | #define _HALMAC_CFG_WMAC_8821C_H_ 18 | 19 | #include "../../halmac_api.h" 20 | 21 | #if HALMAC_8821C_SUPPORT 22 | 23 | enum halmac_ret_status 24 | cfg_drv_info_8821c(struct halmac_adapter *adapter, 25 | enum halmac_drv_info drv_info); 26 | 27 | enum halmac_ret_status 28 | init_low_pwr_8821c(struct halmac_adapter *adapter); 29 | 30 | void 31 | cfg_rx_ignore_8821c(struct halmac_adapter *adapter, 32 | struct halmac_mac_rx_ignore_cfg *cfg); 33 | 34 | enum halmac_ret_status 35 | cfg_ampdu_8821c(struct halmac_adapter *adapter, 36 | struct halmac_ampdu_config *cfg); 37 | 38 | #endif/* HALMAC_8821C_SUPPORT */ 39 | 40 | #endif/* _HALMAC_CFG_WMAC_8821C_H_ */ 41 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_common_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2017 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_COMMON_8821C_H_ 17 | #define _HALMAC_COMMON_8821C_H_ 18 | 19 | #include "../../halmac_api.h" 20 | 21 | #if HALMAC_8821C_SUPPORT 22 | 23 | enum halmac_ret_status 24 | get_hw_value_8821c(struct halmac_adapter *adapter, enum halmac_hw_id hw_id, 25 | void *value); 26 | 27 | enum halmac_ret_status 28 | set_hw_value_8821c(struct halmac_adapter *adapter, enum halmac_hw_id hw_id, 29 | void *value); 30 | 31 | enum halmac_ret_status 32 | fill_txdesc_check_sum_8821c(struct halmac_adapter *adapter, u8 *txdesc); 33 | 34 | #endif/* HALMAC_8821C_SUPPORT */ 35 | 36 | #endif/* _HALMAC_COMMON_8821C_H_ */ 37 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_gpio_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_GPIO_8821C_H_ 17 | #define _HALMAC_GPIO_8821C_H_ 18 | 19 | #include "../../halmac_api.h" 20 | 21 | #if HALMAC_8821C_SUPPORT 22 | 23 | enum halmac_ret_status 24 | pinmux_get_func_8821c(struct halmac_adapter *adapter, 25 | enum halmac_gpio_func gpio_func, u8 *enable); 26 | 27 | enum halmac_ret_status 28 | pinmux_set_func_8821c(struct halmac_adapter *adapter, 29 | enum halmac_gpio_func gpio_func); 30 | 31 | enum halmac_ret_status 32 | pinmux_free_func_8821c(struct halmac_adapter *adapter, 33 | enum halmac_gpio_func gpio_func); 34 | 35 | #endif /* HALMAC_8821C_SUPPORT */ 36 | 37 | #endif/* _HALMAC_GPIO_8821C_H_ */ 38 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_init_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_INIT_8821C_H_ 17 | #define _HALMAC_INIT_8821C_H_ 18 | 19 | #include "../../halmac_api.h" 20 | 21 | #if HALMAC_8821C_SUPPORT 22 | 23 | enum halmac_ret_status 24 | mount_api_8821c(struct halmac_adapter *adapter); 25 | 26 | enum halmac_ret_status 27 | init_trx_cfg_8821c(struct halmac_adapter *adapter, enum halmac_trx_mode mode); 28 | 29 | enum halmac_ret_status 30 | init_system_cfg_8821c(struct halmac_adapter *adapter); 31 | 32 | enum halmac_ret_status 33 | init_protocol_cfg_8821c(struct halmac_adapter *adapter); 34 | 35 | enum halmac_ret_status 36 | init_h2c_8821c(struct halmac_adapter *adapter); 37 | 38 | enum halmac_ret_status 39 | init_edca_cfg_8821c(struct halmac_adapter *adapter); 40 | 41 | enum halmac_ret_status 42 | init_wmac_cfg_8821c(struct halmac_adapter *adapter); 43 | 44 | enum halmac_ret_status 45 | pre_init_system_cfg_8821c(struct halmac_adapter *adapter); 46 | 47 | #endif /* HALMAC_8821C_SUPPORT */ 48 | 49 | #endif/* _HALMAC_INIT_8821C_H_ */ 50 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_pwr_seq_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef HALMAC_POWER_SEQUENCE_8821C 17 | #define HALMAC_POWER_SEQUENCE_8821C 18 | 19 | #include "../../halmac_pwr_seq_cmd.h" 20 | #include "../../halmac_hw_cfg.h" 21 | 22 | #if HALMAC_8821C_SUPPORT 23 | 24 | #define HALMAC_8821C_PWR_SEQ_VER "V23" 25 | 26 | extern struct halmac_wlan_pwr_cfg *card_dis_flow_8821c[]; 27 | extern struct halmac_wlan_pwr_cfg *card_en_flow_8821c[]; 28 | extern struct halmac_wlan_pwr_cfg *suspend_flow_8821c[]; 29 | extern struct halmac_wlan_pwr_cfg *resume_flow_8821c[]; 30 | extern struct halmac_wlan_pwr_cfg *hwpdn_flow_8821c[]; 31 | extern struct halmac_wlan_pwr_cfg *enter_lps_flow_8821c[]; 32 | extern struct halmac_wlan_pwr_cfg *enter_dlps_flow_8821c[]; 33 | extern struct halmac_wlan_pwr_cfg *leave_lps_flow_8821c[]; 34 | 35 | #endif /* HALMAC_8821C_SUPPORT */ 36 | 37 | #endif 38 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_8821c/halmac_usb_8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_USB_8821C_H_ 17 | #define _HALMAC_USB_8821C_H_ 18 | 19 | #include "../../halmac_api.h" 20 | 21 | #if (HALMAC_8821C_SUPPORT && HALMAC_USB_SUPPORT) 22 | 23 | extern struct halmac_intf_phy_para usb2_phy_param_8821c[]; 24 | extern struct halmac_intf_phy_para usb3_phy_param_8821c[]; 25 | 26 | enum halmac_ret_status 27 | mac_pwr_switch_usb_8821c(struct halmac_adapter *adapter, 28 | enum halmac_mac_power pwr); 29 | 30 | enum halmac_ret_status 31 | phy_cfg_usb_8821c(struct halmac_adapter *adapter, 32 | enum halmac_intf_phy_platform pltfm); 33 | 34 | enum halmac_ret_status 35 | pcie_switch_usb_8821c(struct halmac_adapter *adapter, enum halmac_pcie_cfg cfg); 36 | 37 | enum halmac_ret_status 38 | intf_tun_usb_8821c(struct halmac_adapter *adapter); 39 | 40 | #endif /* HALMAC_8821C_SUPPORT */ 41 | 42 | #endif/* _HALMAC_USB_8821C_H_ */ 43 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_88xx_cfg.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_88XX_CFG_H_ 17 | #define _HALMAC_88XX_CFG_H_ 18 | 19 | #include "../halmac_api.h" 20 | 21 | #if HALMAC_88XX_SUPPORT 22 | 23 | #define TX_PAGE_SIZE_88XX 128 24 | #define TX_PAGE_SIZE_SHIFT_88XX 7 /* 128 = 2^7 */ 25 | #define TX_ALIGN_SIZE_88XX 8 26 | #define SDIO_TX_MAX_SIZE_88XX 31744 27 | #define RX_BUF_FW_88XX 12288 28 | 29 | #define TX_DESC_SIZE_88XX 48 30 | #define RX_DESC_SIZE_88XX 24 31 | 32 | #define H2C_PKT_SIZE_88XX 32 /* Only support 32 byte packet now */ 33 | #define H2C_PKT_HDR_SIZE_88XX 8 34 | #define C2H_DATA_OFFSET_88XX 10 35 | #define C2H_PKT_BUF_88XX 256 36 | 37 | /* HW memory address */ 38 | #define OCPBASE_TXBUF_88XX 0x18780000 39 | #define OCPBASE_DMEM_88XX 0x00200000 40 | #define OCPBASE_EMEM_88XX 0x00100000 41 | 42 | #endif /* HALMAC_88XX_SUPPORT */ 43 | 44 | #endif 45 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_flash_88xx.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2017 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_FLASH_88XX_H_ 17 | #define _HALMAC_FLASH_88XX_H_ 18 | 19 | #include "../halmac_api.h" 20 | 21 | #if HALMAC_88XX_SUPPORT 22 | 23 | enum halmac_ret_status 24 | download_flash_88xx(struct halmac_adapter *adapter, u8 *fw_bin, u32 size, 25 | u32 rom_addr); 26 | 27 | enum halmac_ret_status 28 | read_flash_88xx(struct halmac_adapter *adapter, u32 addr, u32 length, u8 *data); 29 | 30 | enum halmac_ret_status 31 | erase_flash_88xx(struct halmac_adapter *adapter, u8 erase_cmd, u32 addr); 32 | 33 | enum halmac_ret_status 34 | check_flash_88xx(struct halmac_adapter *adapter, u8 *fw_bin, u32 size, 35 | u32 addr); 36 | 37 | #endif /* HALMAC_88XX_SUPPORT */ 38 | 39 | #endif/* _HALMAC_FLASH_88XX_H_ */ 40 | -------------------------------------------------------------------------------- /hal/halmac/halmac_88xx/halmac_gpio_88xx.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_GPIO_88XX_H_ 17 | #define _HALMAC_GPIO_88XX_H_ 18 | 19 | #include "../halmac_api.h" 20 | #include "../halmac_gpio_cmd.h" 21 | 22 | #if HALMAC_88XX_SUPPORT 23 | 24 | enum halmac_ret_status 25 | pinmux_wl_led_mode_88xx(struct halmac_adapter *adapter, 26 | enum halmac_wlled_mode mode); 27 | 28 | void 29 | pinmux_wl_led_sw_ctrl_88xx(struct halmac_adapter *adapter, u8 on); 30 | 31 | void 32 | pinmux_sdio_int_polarity_88xx(struct halmac_adapter *adapter, u8 low_active); 33 | 34 | enum halmac_ret_status 35 | pinmux_gpio_mode_88xx(struct halmac_adapter *adapter, u8 gpio_id, u8 output); 36 | 37 | enum halmac_ret_status 38 | pinmux_gpio_output_88xx(struct halmac_adapter *adapter, u8 gpio_id, u8 high); 39 | 40 | enum halmac_ret_status 41 | pinmux_pin_status_88xx(struct halmac_adapter *adapter, u8 pin_id, u8 *high); 42 | 43 | enum halmac_ret_status 44 | pinmux_parser_88xx(struct halmac_adapter *adapter, 45 | const struct halmac_gpio_pimux_list *list, u32 size, 46 | u32 gpio_id, u32 *cur_func); 47 | 48 | #endif /* HALMAC_88XX_SUPPORT */ 49 | 50 | #endif/* _HALMAC_GPIO_88XX_H_ */ 51 | -------------------------------------------------------------------------------- /hal/halmac/halmac_dbg.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2018 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_DBG_H_ 17 | #define _HALMAC_DBG_H_ 18 | 19 | #include "halmac_api.h" 20 | 21 | #if HALMAC_DBG_MONITOR_IO 22 | enum halmac_ret_status 23 | mount_api_dbg(struct halmac_adapter *adapter); 24 | #endif 25 | 26 | #endif 27 | -------------------------------------------------------------------------------- /hal/halmac/halmac_intf_phy_cmd.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef HALMAC_INTF_PHY_CMD 17 | #define HALMAC_INTF_PHY_CMD 18 | 19 | /* Cut mask */ 20 | enum halmac_intf_phy_cut { 21 | HALMAC_INTF_PHY_CUT_TESTCHIP = BIT(0), 22 | HALMAC_INTF_PHY_CUT_A = BIT(1), 23 | HALMAC_INTF_PHY_CUT_B = BIT(2), 24 | HALMAC_INTF_PHY_CUT_C = BIT(3), 25 | HALMAC_INTF_PHY_CUT_D = BIT(4), 26 | HALMAC_INTF_PHY_CUT_E = BIT(5), 27 | HALMAC_INTF_PHY_CUT_F = BIT(6), 28 | HALMAC_INTF_PHY_CUT_G = BIT(7), 29 | HALMAC_INTF_PHY_CUT_ALL = 0x7FFF, 30 | }; 31 | 32 | /* IP selection */ 33 | enum halmac_ip_sel { 34 | HALMAC_IP_INTF_PHY = 0, 35 | HALMAC_IP_SEL_MAC = 1, 36 | HALMAC_IP_PCIE_DBI = 2, 37 | HALMAC_IP_SEL_UNDEFINE = 0x7FFF, 38 | }; 39 | 40 | /* Platform mask */ 41 | enum halmac_intf_phy_platform { 42 | HALMAC_INTF_PHY_PLATFORM_ALL = BIT(0), 43 | HALMAC_INTF_PHY_PLATFORM_ASUS = BIT(1), 44 | HALMAC_INTF_PHY_PLATFORM_LENOVO_V540 = BIT(2), 45 | HALMAC_INTF_PHY_PLATFORM_DHC = BIT(3), 46 | HALMAC_INTF_PHY_PLATFORM_FOR_ALL = 0x7FFF, 47 | }; 48 | 49 | #endif 50 | -------------------------------------------------------------------------------- /hal/halmac/halmac_pcie_reg.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef __HALMAC_PCIE_REG_H__ 17 | #define __HALMAC_PCIE_REG_H__ 18 | 19 | /* PCIE PHY register */ 20 | #define RAC_CTRL_PPR 0x00 21 | #define RAC_SET_PPR 0x20 22 | #define RAC_TRG_PPR 0x21 23 | #define RAC_CTRL_PPR_V1 0x30 24 | #define RAC_SET_PPR_V1 0x31 25 | 26 | /* PCIE CFG register */ 27 | #define PCIE_L1SS_CTRL 0x718 28 | #define PCIE_L1_CTRL 0x719 29 | #define PCIE_ASPM_CTRL 0x70F 30 | #define PCIE_CLK_CTRL 0x725 31 | #define PCIE_L1SS_CAP 0x160 32 | #define PCIE_L1SS_SUP 0x164 33 | #define PCIE_L1SS_STS 0x168 34 | 35 | /* PCIE CFG bit */ 36 | #define PCIE_BIT_WAKE BIT(2) 37 | #define PCIE_BIT_L1 BIT(3) 38 | #define PCIE_BIT_CLK BIT(4) 39 | #define PCIE_BIT_L0S BIT(7) 40 | #define PCIE_BIT_L1SS BIT(5) 41 | #define PCIE_BIT_L1SSSUP BIT(4) 42 | 43 | /* PCIE ASPM mask*/ 44 | #define SHFT_L1DLY 3 45 | #define SHFT_L0SDLY 0 46 | #define PCIE_ASPMDLY_MASK 0x07 47 | #define PCIE_L1SS_MASK 0x0F 48 | 49 | /* PCIE Capability */ 50 | #define PCIE_L1SS_ID 0x001E 51 | 52 | /* PCIE MAC register */ 53 | #define LINK_CTRL2_REG_OFFSET 0xA0 54 | #define GEN2_CTRL_OFFSET 0x80C 55 | #define LINK_STATUS_REG_OFFSET 0x82 56 | 57 | #define PCIE_GEN1_SPEED 0x01 58 | #define PCIE_GEN2_SPEED 0x02 59 | 60 | #endif/* __HALMAC_PCIE_REG_H__ */ 61 | -------------------------------------------------------------------------------- /hal/halmac/halmac_rx_bd_nic.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef _HALMAC_RX_BD_NIC_H_ 17 | #define _HALMAC_RX_BD_NIC_H_ 18 | #if (HALMAC_8814A_SUPPORT || HALMAC_8822B_SUPPORT || HALMAC_8197F_SUPPORT || \ 19 | HALMAC_8821C_SUPPORT || HALMAC_8198F_SUPPORT || HALMAC_8822C_SUPPORT ||\ 20 | HALMAC_8192F_SUPPORT || HALMAC_8197G_SUPPORT || HALMAC_8814B_SUPPORT) 21 | 22 | /*TXBD_DW0*/ 23 | 24 | #define GET_RX_BD_RXFAIL(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 31, 1) 25 | #define GET_RX_BD_TOTALRXPKTSIZE(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 16, 13) 26 | #define GET_RX_BD_RXTAG(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 16, 13) 27 | #define GET_RX_BD_FS(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 15, 1) 28 | #define GET_RX_BD_LS(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 14, 1) 29 | #define GET_RX_BD_RXBUFFSIZE(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x00, 0, 14) 30 | 31 | /*TXBD_DW1*/ 32 | 33 | #define GET_RX_BD_PHYSICAL_ADDR_LOW(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x04, 0, 32) 34 | 35 | /*TXBD_DW2*/ 36 | 37 | #define GET_RX_BD_PHYSICAL_ADDR_HIGH(rxbd) LE_BITS_TO_4BYTE(rxbd + 0x08, 0, 32) 38 | 39 | #endif 40 | 41 | #endif 42 | -------------------------------------------------------------------------------- /hal/halmac/halmac_sdio_reg.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef __HALMAC_SDIO_REG_H__ 17 | #define __HALMAC_SDIO_REG_H__ 18 | 19 | /* SDIO CMD address mapping */ 20 | 21 | #define HALMAC_SDIO_4BYTE_LEN_MASK 0x1FFF 22 | #define HALMAC_SDIO_LOCAL_MSK 0x0FFF 23 | #define HALMAC_WLAN_MAC_REG_MSK 0xFFFF 24 | #define HALMAC_WLAN_IOREG_MSK 0xFFFF 25 | 26 | /* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */ 27 | enum halmac_sdio_cmd_addr { 28 | HALMAC_SDIO_CMD_ADDR_SDIO_REG = 0, 29 | HALMAC_SDIO_CMD_ADDR_MAC_REG = 8, 30 | HALMAC_SDIO_CMD_ADDR_TXFF_HIGH = 4, 31 | HALMAC_SDIO_CMD_ADDR_TXFF_LOW = 6, 32 | HALMAC_SDIO_CMD_ADDR_TXFF_NORMAL = 5, 33 | HALMAC_SDIO_CMD_ADDR_TXFF_EXTRA = 7, 34 | HALMAC_SDIO_CMD_ADDR_RXFF = 7, 35 | }; 36 | 37 | /* IO Bus domain address mapping */ 38 | #define SDIO_LOCAL_OFFSET 0x10250000 39 | #define WLAN_IOREG_OFFSET 0x10260000 40 | #define FW_FIFO_OFFSET 0x10270000 41 | #define TX_HIQ_OFFSET 0x10310000 42 | #define TX_MIQ_OFFSET 0x10320000 43 | #define TX_LOQ_OFFSET 0x10330000 44 | #define TX_EXQ_OFFSET 0x10350000 45 | #define RX_RXOFF_OFFSET 0x10340000 46 | 47 | /* Get TX WLAN FIFO information in CMD53 addr */ 48 | #if (HALMAC_8822B_SUPPORT || HALMAC_8821C_SUPPORT) 49 | #define GET_WLAN_TXFF_DEVICE_ID(cmd53_addr) \ 50 | LE_BITS_TO_4BYTE((u32 *)cmd53_addr, 13, 4) 51 | #define GET_WLAN_TXFF_PKT_SIZE(cmd53_addr) \ 52 | (LE_BITS_TO_4BYTE((u32 *)cmd53_addr, 0, 13) << 2) 53 | #endif 54 | 55 | #endif/* __HALMAC_SDIO_REG_H__ */ 56 | -------------------------------------------------------------------------------- /hal/halmac/halmac_usb_reg.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2019 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifndef __HALMAC_USB_REG_H__ 17 | #define __HALMAC_USB_REG_H__ 18 | 19 | #define USB_REG_PAGE 0xF4 20 | 21 | #endif/* __HALMAC_USB_REG_H__ */ 22 | -------------------------------------------------------------------------------- /hal/phydm/halrf/halrf_features.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | #ifndef __HALRF_FEATURES_H__ 27 | #define __HALRF_FEATURES_H__ 28 | 29 | #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) 30 | 31 | #define CONFIG_HALRF_POWERTRACKING 1 32 | 33 | #elif (DM_ODM_SUPPORT_TYPE == ODM_AP) 34 | 35 | #define CONFIG_HALRF_POWERTRACKING 1 36 | 37 | #elif (DM_ODM_SUPPORT_TYPE == ODM_CE) 38 | 39 | #define CONFIG_HALRF_POWERTRACKING 1 40 | 41 | #endif 42 | 43 | #endif /*#ifndef __HALRF_FEATURES_H__*/ 44 | -------------------------------------------------------------------------------- /hal/phydm/halrf/halrf_powertracking.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | #ifndef __HALRF_POWER_TRACKING_H__ 27 | #define __HALRF_POWER_TRACKING_H__ 28 | 29 | boolean 30 | odm_check_power_status(void *dm_void); 31 | 32 | #if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE)) 33 | void halrf_update_pwr_track(void *dm_void, u8 rate); 34 | #endif 35 | 36 | #if (DM_ODM_SUPPORT_TYPE == ODM_WIN) 37 | void halrf_update_init_rate_work_item_callback( 38 | void *context); 39 | #endif 40 | 41 | void halrf_set_pwr_track(void *dm_void, u8 enable); 42 | 43 | #endif /*#ifndef __HALRF_POWERTRACKING_H__*/ 44 | -------------------------------------------------------------------------------- /hal/phydm/halrf/halrf_psd.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | #ifndef __HALRF_PSD_H__ 17 | #define __HALRF_PSD_H__ 18 | 19 | 20 | struct _halrf_psd_data { 21 | u32 point; 22 | u32 start_point; 23 | u32 stop_point; 24 | u32 average; 25 | u32 buf_size; 26 | u32 psd_data[256]; 27 | u32 psd_progress; 28 | }; 29 | 30 | u32 31 | halrf_psd_init( 32 | void *dm_void); 33 | 34 | u32 35 | halrf_psd_query( 36 | void *dm_void, 37 | u32 *outbuf, 38 | u32 buf_size); 39 | 40 | u32 41 | halrf_psd_init_query( 42 | void *dm_void, 43 | u32 *outbuf, 44 | u32 point, 45 | u32 start_point, 46 | u32 stop_point, 47 | u32 average, 48 | u32 buf_size); 49 | 50 | #endif /*#__HALRF_PSD_H__*/ 51 | -------------------------------------------------------------------------------- /hal/phydm/halrf/halrf_txgapcal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | #ifndef __HALRF_TXGAPCAL_H__ 27 | #define __HALRF_TXGAPCAL_H__ 28 | 29 | void odm_tx_gain_gap_calibration(void *dm_void); 30 | 31 | #endif /*__HALRF_TXGAPCAL_H__*/ 32 | -------------------------------------------------------------------------------- /hal/phydm/halrf/rtl8821c/version_rtl8821c_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | /*RTL8821C RF Parameters*/ 26 | #define RF_RELEASE_VERSION_8821C 1 27 | -------------------------------------------------------------------------------- /hal/phydm/mp_precomp.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | -------------------------------------------------------------------------------- /hal/phydm/phydm_direct_bf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | #ifndef __PHYDM_DIR_BF_H__ 27 | #define __PHYDM_DIR_BF_H__ 28 | 29 | #ifdef CONFIG_DIRECTIONAL_BF 30 | #define ANGLE_NUM 12 31 | 32 | /*@ 33 | * ============================================================ 34 | * function prototype 35 | * ============================================================ 36 | */ 37 | void phydm_iq_gen_en(void *dm_void); 38 | void phydm_dis_cdd(void *dm_void); 39 | void phydm_pathb_q_matrix_rotate_en(void *dm_void); 40 | void phydm_pathb_q_matrix_rotate(void *dm_void, u16 idx); 41 | void phydm_set_direct_bfer(void *dm_void, u16 phs_idx, u8 su_idx); 42 | void phydm_set_direct_bfer_txdesc_en(void *dm_void, u8 enable); 43 | #endif 44 | #endif 45 | -------------------------------------------------------------------------------- /hal/phydm/phydm_noisemonitor.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | #ifndef __ODMNOISEMONITOR_H__ 26 | #define __ODMNOISEMONITOR_H__ 27 | 28 | #define VALID_CNT 5 29 | 30 | struct noise_level { 31 | u8 value[PHYDM_MAX_RF_PATH]; 32 | s8 sval[PHYDM_MAX_RF_PATH]; 33 | s32 sum[PHYDM_MAX_RF_PATH]; 34 | u8 valid[PHYDM_MAX_RF_PATH]; 35 | u8 valid_cnt[PHYDM_MAX_RF_PATH]; 36 | }; 37 | 38 | struct odm_noise_monitor { 39 | s8 noise[PHYDM_MAX_RF_PATH]; 40 | s16 noise_all; 41 | }; 42 | 43 | s16 odm_inband_noise_monitor(void *dm_void, u8 is_pause_dig, u8 igi_value, 44 | u32 max_time); 45 | 46 | void phydm_noisy_detection(void *dm_void); 47 | 48 | #endif 49 | -------------------------------------------------------------------------------- /hal/phydm/phydm_rssi_monitor.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | #ifndef __PHYDM_RSSI_MONITOR_H__ 27 | #define __PHYDM_RSSI_MONITOR_H__ 28 | 29 | #define RSSI_MONITOR_VERSION "2.0" 30 | 31 | /* @1 ============================================================ 32 | * 1 Definition 33 | * 1 ============================================================ 34 | */ 35 | 36 | /* @1 ============================================================ 37 | * 1 structure 38 | * 1 ============================================================ 39 | */ 40 | 41 | /* @1 ============================================================ 42 | * 1 enumeration 43 | * 1 ============================================================ 44 | */ 45 | 46 | /* @1 ============================================================ 47 | * 1 function prototype 48 | * 1 ============================================================ 49 | */ 50 | 51 | void phydm_rssi_monitor_check(void *dm_void); 52 | 53 | void phydm_rssi_monitor_init(void *dm_void); 54 | #if (DM_ODM_SUPPORT_TYPE == ODM_AP) 55 | void phydm_sta_rssi_init(void *dm_void, u8 macid, u8 init_rssi); 56 | #endif 57 | 58 | #endif 59 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/halhwimg8821c_mac.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | 26 | /*Image2HeaderVersion: R3 1.5.10.1*/ 27 | #if (RTL8821C_SUPPORT == 1) 28 | #ifndef __INC_MP_MAC_HW_IMG_8821C_H 29 | #define __INC_MP_MAC_HW_IMG_8821C_H 30 | 31 | /****************************************************************************** 32 | * mac_reg.TXT 33 | ******************************************************************************/ 34 | 35 | /* tc: Test Chip, mp: mp Chip*/ 36 | void 37 | odm_read_and_config_mp_8821c_mac_reg(struct dm_struct *dm); 38 | u32 odm_get_version_mp_8821c_mac_reg(void); 39 | 40 | #endif 41 | #endif /* end of HWIMG_SUPPORT*/ 42 | 43 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/mp_precomp.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/phydm_regconfig8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __INC_ODM_REGCONFIG_H_8821C 16 | #define __INC_ODM_REGCONFIG_H_8821C 17 | 18 | #if (RTL8821C_SUPPORT == 1) 19 | 20 | void odm_config_rf_reg_8821c(struct dm_struct *dm, u32 addr, u32 data, 21 | enum rf_path rf_path, u32 reg_addr); 22 | 23 | void odm_config_rf_radio_a_8821c(struct dm_struct *dm, u32 addr, u32 data); 24 | 25 | void odm_config_rf_radio_b_8821c( 26 | struct dm_struct *dm, 27 | u32 addr, 28 | u32 data); 29 | 30 | void odm_config_mac_8821c(struct dm_struct *dm, u32 addr, u8 data); 31 | 32 | void odm_update_agc_big_jump_lmt_8821c(struct dm_struct *dm, u32 addr, 33 | u32 data); 34 | 35 | void odm_config_bb_agc_8821c(struct dm_struct *dm, u32 addr, u32 bitmask, 36 | u32 data); 37 | 38 | void odm_config_bb_phy_reg_pg_8821c(struct dm_struct *dm, u32 band, u32 rf_path, 39 | u32 tx_num, u32 addr, u32 bitmask, 40 | u32 data); 41 | 42 | void odm_config_bb_phy_8821c(struct dm_struct *dm, u32 addr, u32 bitmask, 43 | u32 data); 44 | 45 | void odm_config_bb_txpwr_lmt_8821c_ex(struct dm_struct *dm, u8 regulation, 46 | u8 band, u8 bandwidth, u8 rate_section, 47 | u8 rf_path, u8 channel, s8 power_limit); 48 | 49 | void odm_config_bb_txpwr_lmt_8821c(struct dm_struct *dm, u8 *regulation, 50 | u8 *band, u8 *bandwidth, u8 *rate_section, 51 | u8 *rf_path, u8 *channel, u8 *power_limit); 52 | 53 | #endif 54 | #endif /* RTL8821C_SUPPORT == 1*/ 55 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/phydm_rtl8821c.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | #include "mp_precomp.h" 26 | #include "../phydm_precomp.h" 27 | 28 | #if (RTL8821C_SUPPORT) 29 | void phydm_dynamic_switch_htstf_agc_8821c(struct dm_struct *dm) 30 | { 31 | u16 ndp_valid_cnt = 0; 32 | 33 | if (dm->bhtstfdisabled) 34 | return; 35 | 36 | /*This count will be reset every 2 seconds*/ 37 | ndp_valid_cnt = (u16)odm_get_bb_reg(dm, R_0xf24, MASKLWORD); 38 | 39 | if (dm->total_tp == 0 || ndp_valid_cnt != 0) { 40 | odm_set_bb_reg(dm, R_0x8d8, BIT(17), 0x1); 41 | dm->no_ndp_cnts = 0; 42 | } else { 43 | dm->no_ndp_cnts++; 44 | 45 | if (dm->no_ndp_cnts == 3) { 46 | odm_set_bb_reg(dm, R_0x8d8, BIT(17), 0x0); 47 | dm->no_ndp_cnts = 0; 48 | } 49 | } 50 | dm->ndp_cnt_pre = ndp_valid_cnt; 51 | } 52 | 53 | void phydm_hwsetting_8821c(struct dm_struct *dm) 54 | { 55 | /*phydm_dynamic_switch_htstf_agc_8821c(dm);*/ 56 | } 57 | #endif 58 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/phydm_rtl8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | #if (RTL8821C_SUPPORT) 26 | #ifndef __ODM_RTL8821C_H__ 27 | #define __ODM_RTL8821C_H__ 28 | 29 | void phydm_hwsetting_8821c(struct dm_struct *dm); 30 | #endif 31 | #endif 32 | -------------------------------------------------------------------------------- /hal/phydm/rtl8821c/version_rtl8821c.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * The full GNU General Public License is included in this distribution in the 15 | * file called LICENSE. 16 | * 17 | * Contact Information: 18 | * wlanfae 19 | * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 | * Hsinchu 300, Taiwan. 21 | * 22 | * Larry Finger 23 | * 24 | *****************************************************************************/ 25 | /*RTL8821C PHY Parameters*/ 26 | /* 27 | [Caution] 28 | Since 01/Aug/2015, the commit rules will be simplified. 29 | You do not need to fill up the version.h anymore, 30 | only the maintenance supervisor fills it before formal release. 31 | */ 32 | #define RELEASE_DATE_8821C 20200908 33 | #define COMMIT_BY_8821C "WeiChi" 34 | #define RELEASE_VERSION_8821C 62 35 | -------------------------------------------------------------------------------- /hal/rtl8821c/hal8821c_fw.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | ******************************************************************************/ 15 | 16 | #ifdef CONFIG_RTL8821C 17 | 18 | #ifndef _FW_HEADER_8821C_H 19 | #define _FW_HEADER_8821C_H 20 | 21 | #ifdef LOAD_FW_HEADER_FROM_DRIVER 22 | #if (defined(CONFIG_AP_WOWLAN) || (DM_ODM_SUPPORT_TYPE & (ODM_AP))) 23 | extern u8 array_mp_8821c_fw_ap[115416]; 24 | extern u32 array_length_mp_8821c_fw_ap; 25 | #endif 26 | 27 | #if (DM_ODM_SUPPORT_TYPE & (ODM_WIN)) || (DM_ODM_SUPPORT_TYPE & (ODM_CE)) 28 | extern u8 array_mp_8821c_fw_nic[138984]; 29 | extern u32 array_length_mp_8821c_fw_nic; 30 | extern u8 array_mp_8821c_fw_spic[73216]; 31 | extern u32 array_length_mp_8821c_fw_spic; 32 | #ifdef CONFIG_WOWLAN 33 | extern u8 array_mp_8821c_fw_wowlan[103304]; 34 | extern u32 array_length_mp_8821c_fw_wowlan; 35 | #endif /*CONFIG_WOWLAN*/ 36 | #endif 37 | #endif /* end of LOAD_FW_HEADER_FROM_DRIVER */ 38 | 39 | #endif 40 | 41 | #endif 42 | 43 | -------------------------------------------------------------------------------- /hal/rtl8821c/usb/rtl8821cu_io.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #define _RTL8821CU_IO_C_ 16 | 17 | #include /* PADAPTER and etc. */ 18 | 19 | void rtl8821cu_set_intf_ops(struct _io_ops *pops) 20 | { 21 | 22 | _rtw_memset((u8 *)pops, 0, sizeof(struct _io_ops)); 23 | 24 | pops->_read8 = &usb_read8; 25 | pops->_read16 = &usb_read16; 26 | pops->_read32 = &usb_read32; 27 | pops->_read_mem = &usb_read_mem; 28 | pops->_read_port = &usb_read_port; 29 | 30 | pops->_write8 = &usb_write8; 31 | pops->_write16 = &usb_write16; 32 | pops->_write32 = &usb_write32; 33 | pops->_writeN = &usb_writeN; 34 | 35 | #ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 36 | pops->_write8_async = &usb_async_write8; 37 | pops->_write16_async = &usb_async_write16; 38 | pops->_write32_async = &usb_async_write32; 39 | #endif 40 | pops->_write_mem = &usb_write_mem; 41 | pops->_write_port = &usb_write_port; 42 | 43 | pops->_read_port_cancel = &usb_read_port_cancel; 44 | pops->_write_port_cancel = &usb_write_port_cancel; 45 | 46 | #ifdef CONFIG_USB_INTERRUPT_IN_PIPE 47 | pops->_read_interrupt = &usb_read_interrupt; 48 | #endif 49 | 50 | 51 | } 52 | -------------------------------------------------------------------------------- /include/circ_buf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __CIRC_BUF_H_ 16 | #define __CIRC_BUF_H_ 1 17 | 18 | #define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1)) 19 | 20 | #define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size)) 21 | 22 | #endif //_CIRC_BUF_H_ 23 | 24 | -------------------------------------------------------------------------------- /include/cmd_osdep.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __CMD_OSDEP_H_ 16 | #define __CMD_OSDEP_H_ 17 | 18 | 19 | extern sint _rtw_init_cmd_priv(struct cmd_priv *pcmdpriv); 20 | extern sint _rtw_init_evt_priv(struct evt_priv *pevtpriv); 21 | extern void _rtw_free_evt_priv(struct evt_priv *pevtpriv); 22 | extern void _rtw_free_cmd_priv(struct cmd_priv *pcmdpriv); 23 | extern sint _rtw_enqueue_cmd(_queue *queue, struct cmd_obj *obj, bool to_head); 24 | extern struct cmd_obj *_rtw_dequeue_cmd(_queue *queue); 25 | 26 | #endif 27 | -------------------------------------------------------------------------------- /include/custom_gpio.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __CUSTOM_GPIO_H__ 16 | #define __CUSTOM_GPIO_H___ 17 | 18 | #include 19 | #include 20 | 21 | typedef enum cust_gpio_modes { 22 | WLAN_PWDN_ON, 23 | WLAN_PWDN_OFF, 24 | WLAN_POWER_ON, 25 | WLAN_POWER_OFF, 26 | WLAN_BT_PWDN_ON, 27 | WLAN_BT_PWDN_OFF 28 | } cust_gpio_modes_t; 29 | 30 | extern int rtw_wifi_gpio_init(void); 31 | extern int rtw_wifi_gpio_deinit(void); 32 | extern void rtw_wifi_gpio_wlan_ctrl(int onoff); 33 | 34 | #endif 35 | -------------------------------------------------------------------------------- /include/drv_types_gspi.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __DRV_TYPES_GSPI_H__ 16 | #define __DRV_TYPES_GSPI_H__ 17 | 18 | /* SPI Header Files */ 19 | #ifdef PLATFORM_LINUX 20 | #include 21 | #include 22 | #include 23 | /* #include */ 24 | #include 25 | #include 26 | #include 27 | #include 28 | #include 29 | #include 30 | #include 31 | #endif 32 | 33 | 34 | typedef struct gspi_data { 35 | u8 func_number; 36 | 37 | u8 tx_block_mode; 38 | u8 rx_block_mode; 39 | u32 block_transfer_len; 40 | 41 | #ifdef PLATFORM_LINUX 42 | struct spi_device *func; 43 | 44 | struct workqueue_struct *priv_wq; 45 | struct delayed_work irq_work; 46 | #endif 47 | } GSPI_DATA, *PGSPI_DATA; 48 | 49 | #endif /* #ifndef __DRV_TYPES_GSPI_H__ */ 50 | -------------------------------------------------------------------------------- /include/drv_types_linux.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __DRV_TYPES_LINUX_H__ 16 | #define __DRV_TYPES_LINUX_H__ 17 | 18 | 19 | #endif 20 | -------------------------------------------------------------------------------- /include/drv_types_pci.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __DRV_TYPES_PCI_H__ 16 | #define __DRV_TYPES_PCI_H__ 17 | 18 | #ifdef PLATFORM_LINUX 19 | #include 20 | #endif 21 | 22 | #define INTEL_VENDOR_ID 0x8086 23 | #define SIS_VENDOR_ID 0x1039 24 | #define ATI_VENDOR_ID 0x1002 25 | #define ATI_DEVICE_ID 0x7914 26 | #define AMD_VENDOR_ID 0x1022 27 | 28 | #define PCI_VENDER_ID_REALTEK 0x10ec 29 | 30 | enum aspm_mode { 31 | ASPM_MODE_UND, 32 | ASPM_MODE_PERF, 33 | ASPM_MODE_PS, 34 | ASPM_MODE_DEF, 35 | }; 36 | 37 | struct pci_priv { 38 | BOOLEAN pci_clk_req; 39 | 40 | u8 pciehdr_offset; 41 | 42 | u8 linkctrl_reg; 43 | u8 pcibridge_linkctrlreg; 44 | 45 | u8 amd_l1_patch; 46 | 47 | #ifdef CONFIG_PCI_DYNAMIC_ASPM 48 | u8 aspm_mode; 49 | #endif 50 | }; 51 | 52 | typedef struct _RT_ISR_CONTENT { 53 | union { 54 | u32 IntArray[2]; 55 | u32 IntReg4Byte; 56 | u16 IntReg2Byte; 57 | }; 58 | } RT_ISR_CONTENT, *PRT_ISR_CONTENT; 59 | 60 | #endif 61 | -------------------------------------------------------------------------------- /include/ethernet.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | /*! \file */ 16 | #ifndef __INC_ETHERNET_H 17 | #define __INC_ETHERNET_H 18 | 19 | #define ETHERNET_ADDRESS_LENGTH 6 /* !< Ethernet Address Length */ 20 | #define ETHERNET_HEADER_SIZE 14 /* !< Ethernet Header Length */ 21 | #define LLC_HEADER_SIZE 6 /* !< LLC Header Length */ 22 | #define TYPE_LENGTH_FIELD_SIZE 2 /* !< Type/Length Size */ 23 | #define MINIMUM_ETHERNET_PACKET_SIZE 60 /* !< Minimum Ethernet Packet Size */ 24 | #define MAXIMUM_ETHERNET_PACKET_SIZE 1514 /* !< Maximum Ethernet Packet Size */ 25 | 26 | #define RT_ETH_IS_MULTICAST(_pAddr) ((((u8 *)(_pAddr))[0]&0x01) != 0) /* !< Is Multicast Address? */ 27 | #define RT_ETH_IS_BROADCAST(_pAddr) (\ 28 | ((u8 *)(_pAddr))[0] == 0xff && \ 29 | ((u8 *)(_pAddr))[1] == 0xff && \ 30 | ((u8 *)(_pAddr))[2] == 0xff && \ 31 | ((u8 *)(_pAddr))[3] == 0xff && \ 32 | ((u8 *)(_pAddr))[4] == 0xff && \ 33 | ((u8 *)(_pAddr))[5] == 0xff) /* !< Is Broadcast Address? */ 34 | 35 | 36 | #endif /* #ifndef __INC_ETHERNET_H */ 37 | -------------------------------------------------------------------------------- /include/gspi_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __GSPI_HAL_H__ 16 | #define __GSPI_HAL_H__ 17 | 18 | 19 | void spi_int_dpc(PADAPTER padapter, u32 sdio_hisr); 20 | u8 rtw_set_hal_ops(_adapter *padapter); 21 | 22 | #ifdef CONFIG_RTL8188E 23 | void rtl8188es_set_hal_ops(PADAPTER padapter); 24 | #endif 25 | 26 | #ifdef CONFIG_RTL8723B 27 | void rtl8723bs_set_hal_ops(PADAPTER padapter); 28 | #endif 29 | 30 | #endif /* __GSPI_HAL_H__ */ 31 | -------------------------------------------------------------------------------- /include/gspi_ops_linux.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __SDIO_OPS_LINUX_H__ 16 | #define __SDIO_OPS_LINUX_H__ 17 | 18 | #endif 19 | -------------------------------------------------------------------------------- /include/gspi_osintf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __SDIO_OSINTF_H__ 16 | #define __SDIO_OSINTF_H__ 17 | 18 | 19 | #endif 20 | -------------------------------------------------------------------------------- /include/h2clbk.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | 17 | #define _H2CLBK_H_ 18 | 19 | 20 | void _lbk_cmd(PADAPTER Adapter); 21 | 22 | void _lbk_rsp(PADAPTER Adapter); 23 | 24 | void _lbk_evt(PADAPTER Adapter); 25 | 26 | void h2c_event_callback(unsigned char *dev, unsigned char *pbuf); 27 | -------------------------------------------------------------------------------- /include/hal_gspi.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __HAL_GSPI_H_ 16 | #define __HAL_GSPI_H_ 17 | 18 | #define ffaddr2deviceId(pdvobj, addr) (pdvobj->Queue2Pipe[addr]) 19 | 20 | u8 rtw_hal_gspi_max_txoqt_free_space(_adapter *padapter); 21 | u8 rtw_hal_gspi_query_tx_freepage(_adapter *padapter, u8 PageIdx, u8 RequiredPageNum); 22 | void rtw_hal_gspi_update_tx_freepage(_adapter *padapter, u8 PageIdx, u8 RequiredPageNum); 23 | void rtw_hal_set_gspi_tx_max_length(PADAPTER padapter, u8 numHQ, u8 numNQ, u8 numLQ, u8 numPubQ); 24 | u32 rtw_hal_get_gspi_tx_max_length(PADAPTER padapter, u8 queue_idx); 25 | 26 | #endif 27 | -------------------------------------------------------------------------------- /include/hal_sdio_coex.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 Realtek Corporation. All rights reserved. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | * You should have received a copy of the GNU General Public License along with 15 | * this program; if not, write to the Free Software Foundation, Inc., 16 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 17 | * 18 | * 19 | ******************************************************************************/ 20 | #ifndef __HAL_SDIO_COEX_H__ 21 | #define __HAL_SDIO_COEX_H__ 22 | 23 | #include 24 | 25 | #ifdef CONFIG_SDIO_MULTI_FUNCTION_COEX 26 | 27 | enum { /* for sdio multi-func. coex */ 28 | SDIO_MULTI_WIFI = 0, 29 | SDIO_MULTI_BT, 30 | SDIO_MULTI_NUM 31 | }; 32 | 33 | bool ex_hal_sdio_multi_if_bus_available(PADAPTER adapter); 34 | 35 | #else 36 | 37 | #define ex_hal_sdio_multi_if_bus_available(adapter) TRUE 38 | 39 | #endif /* CONFIG_SDIO_MULTI_FUNCTION_COEX */ 40 | #endif /* !__HAL_SDIO_COEX_H__ */ 41 | 42 | -------------------------------------------------------------------------------- /include/mlme_osdep.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __MLME_OSDEP_H_ 16 | #define __MLME_OSDEP_H_ 17 | 18 | extern void rtw_os_indicate_disconnect(_adapter *adapter, u16 reason, u8 locally_generated); 19 | extern void rtw_os_indicate_connect(_adapter *adapter); 20 | void rtw_os_indicate_scan_done(_adapter *padapter, bool aborted); 21 | extern void rtw_report_sec_ie(_adapter *adapter, u8 authmode, u8 *sec_ie); 22 | 23 | void rtw_reset_securitypriv(_adapter *adapter); 24 | 25 | #endif /* _MLME_OSDEP_H_ */ 26 | -------------------------------------------------------------------------------- /include/nic_spec.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | 17 | #ifndef __NIC_SPEC_H__ 18 | #define __NIC_SPEC_H__ 19 | 20 | #include 21 | 22 | #define RTL8711_MCTRL_ (0x20000) 23 | #define RTL8711_UART_ (0x30000) 24 | #define RTL8711_TIMER_ (0x40000) 25 | #define RTL8711_FINT_ (0x50000) 26 | #define RTL8711_HINT_ (0x50000) 27 | #define RTL8711_GPIO_ (0x60000) 28 | #define RTL8711_WLANCTRL_ (0x200000) 29 | #define RTL8711_WLANFF_ (0xe00000) 30 | #define RTL8711_HCICTRL_ (0x600000) 31 | #define RTL8711_SYSCFG_ (0x620000) 32 | #define RTL8711_SYSCTRL_ (0x620000) 33 | #define RTL8711_MCCTRL_ (0x020000) 34 | 35 | 36 | #include 37 | 38 | #include 39 | 40 | 41 | #endif /* __RTL8711_SPEC_H__ */ 42 | -------------------------------------------------------------------------------- /include/pci_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __PCI_HAL_H__ 16 | #define __PCI_HAL_H__ 17 | 18 | #ifdef CONFIG_RTL8188E 19 | void rtl8188ee_set_hal_ops(_adapter *padapter); 20 | #endif 21 | 22 | #if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) 23 | void rtl8812ae_set_hal_ops(_adapter *padapter); 24 | #endif 25 | 26 | #if defined(CONFIG_RTL8192E) 27 | void rtl8192ee_set_hal_ops(_adapter *padapter); 28 | #endif 29 | 30 | #if defined(CONFIG_RTL8192F) 31 | void rtl8192fe_set_hal_ops(_adapter *padapter); 32 | #endif 33 | 34 | #ifdef CONFIG_RTL8723B 35 | void rtl8723be_set_hal_ops(_adapter *padapter); 36 | #endif 37 | 38 | #ifdef CONFIG_RTL8723D 39 | void rtl8723de_set_hal_ops(_adapter *padapter); 40 | #endif 41 | 42 | #ifdef CONFIG_RTL8814A 43 | void rtl8814ae_set_hal_ops(_adapter *padapter); 44 | #endif 45 | 46 | #ifdef CONFIG_RTL8822B 47 | void rtl8822be_set_hal_ops(PADAPTER padapter); 48 | #endif 49 | 50 | #ifdef CONFIG_RTL8822C 51 | void rtl8822ce_set_hal_ops(PADAPTER padapter); 52 | #endif 53 | 54 | #ifdef CONFIG_RTL8814B 55 | void rtl8814be_set_hal_ops(PADAPTER padapter); 56 | #endif 57 | 58 | u8 rtw_set_hal_ops(_adapter *padapter); 59 | 60 | #endif /* __PCIE_HAL_H__ */ 61 | -------------------------------------------------------------------------------- /include/rtl8188e_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188E_DM_H__ 16 | #define __RTL8188E_DM_H__ 17 | 18 | void rtl8188e_init_dm_priv(PADAPTER Adapter); 19 | void rtl8188e_deinit_dm_priv(PADAPTER Adapter); 20 | void rtl8188e_InitHalDm(PADAPTER Adapter); 21 | void rtl8188e_HalDmWatchDog(PADAPTER Adapter); 22 | 23 | /* void rtl8192c_dm_CheckTXPowerTracking(PADAPTER Adapter); */ 24 | 25 | /* void rtl8192c_dm_RF_Saving(PADAPTER pAdapter, u8 bForceInNormal); */ 26 | 27 | #endif 28 | -------------------------------------------------------------------------------- /include/rtl8188e_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188E_LED_H__ 16 | #define __RTL8188E_LED_H__ 17 | 18 | #ifdef CONFIG_RTW_SW_LED 19 | 20 | /* ******************************************************************************** 21 | * Interface to manipulate LED objects. 22 | * ******************************************************************************** */ 23 | #ifdef CONFIG_USB_HCI 24 | void rtl8188eu_InitSwLeds(PADAPTER padapter); 25 | void rtl8188eu_DeInitSwLeds(PADAPTER padapter); 26 | #endif 27 | #ifdef CONFIG_PCI_HCI 28 | void rtl8188ee_InitSwLeds(PADAPTER padapter); 29 | void rtl8188ee_DeInitSwLeds(PADAPTER padapter); 30 | #endif 31 | #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) 32 | void rtl8188es_InitSwLeds(PADAPTER padapter); 33 | void rtl8188es_DeInitSwLeds(PADAPTER padapter); 34 | #endif 35 | 36 | #endif 37 | #endif /*CONFIG_RTW_SW_LED*/ 38 | -------------------------------------------------------------------------------- /include/rtl8188e_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188E_RF_H__ 16 | #define __RTL8188E_RF_H__ 17 | 18 | 19 | 20 | int PHY_RF6052_Config8188E(PADAPTER Adapter); 21 | void rtl8188e_RF_ChangeTxPath(PADAPTER Adapter, 22 | u16 DataRate); 23 | void rtl8188e_PHY_RF6052SetBandwidth( 24 | PADAPTER Adapter, 25 | enum channel_width Bandwidth); 26 | 27 | #endif/* __RTL8188E_RF_H__ */ 28 | -------------------------------------------------------------------------------- /include/rtl8188e_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8188E_SRESET_H_ 16 | #define _RTL8188E_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8188e_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8188e_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8188f_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188F_DM_H__ 16 | #define __RTL8188F_DM_H__ 17 | /* ************************************************************ 18 | * Description: 19 | * 20 | * This file is for 8188F dynamic mechanism only 21 | * 22 | * 23 | * ************************************************************ */ 24 | 25 | /* ************************************************************ 26 | * structure and define 27 | * ************************************************************ */ 28 | 29 | /* ************************************************************ 30 | * function prototype 31 | * ************************************************************ */ 32 | 33 | void rtl8188f_init_dm_priv(PADAPTER padapter); 34 | void rtl8188f_deinit_dm_priv(PADAPTER padapter); 35 | 36 | void rtl8188f_InitHalDm(PADAPTER padapter); 37 | void rtl8188f_HalDmWatchDog(PADAPTER padapter); 38 | 39 | #endif 40 | -------------------------------------------------------------------------------- /include/rtl8188f_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188F_LED_H__ 16 | #define __RTL8188F_LED_H__ 17 | #ifdef CONFIG_RTW_SW_LED 18 | 19 | #include 20 | #include 21 | #include 22 | 23 | 24 | /* ******************************************************************************** 25 | * Interface to manipulate LED objects. 26 | * ******************************************************************************** */ 27 | #ifdef CONFIG_USB_HCI 28 | void rtl8188fu_InitSwLeds(PADAPTER padapter); 29 | void rtl8188fu_DeInitSwLeds(PADAPTER padapter); 30 | #endif 31 | #ifdef CONFIG_SDIO_HCI 32 | void rtl8188fs_InitSwLeds(PADAPTER padapter); 33 | void rtl8188fs_DeInitSwLeds(PADAPTER padapter); 34 | #endif 35 | #ifdef CONFIG_GSPI_HCI 36 | void rtl8188fs_InitSwLeds(PADAPTER padapter); 37 | void rtl8188fs_DeInitSwLeds(PADAPTER padapter); 38 | #endif 39 | #ifdef CONFIG_PCI_HCI 40 | void rtl8188fe_InitSwLeds(PADAPTER padapter); 41 | void rtl8188fe_DeInitSwLeds(PADAPTER padapter); 42 | #endif 43 | 44 | #endif 45 | #endif/*CONFIG_RTW_SW_LED*/ 46 | -------------------------------------------------------------------------------- /include/rtl8188f_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8188F_RF_H__ 16 | #define __RTL8188F_RF_H__ 17 | 18 | int PHY_RF6052_Config8188F(PADAPTER Adapter); 19 | 20 | void 21 | PHY_RF6052SetBandwidth8188F( 22 | PADAPTER Adapter, 23 | enum channel_width Bandwidth); 24 | 25 | #endif 26 | -------------------------------------------------------------------------------- /include/rtl8188f_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8188F_SRESET_H_ 16 | #define _RTL8188F_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8188f_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8188f_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8192e_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8192E_DM_H__ 16 | #define __RTL8192E_DM_H__ 17 | 18 | 19 | void rtl8192e_init_dm_priv(PADAPTER Adapter); 20 | void rtl8192e_deinit_dm_priv(PADAPTER Adapter); 21 | void rtl8192e_InitHalDm(PADAPTER Adapter); 22 | void rtl8192e_HalDmWatchDog(PADAPTER Adapter); 23 | 24 | /* void rtl8192c_dm_CheckTXPowerTracking(PADAPTER Adapter); */ 25 | 26 | /* void rtl8192c_dm_RF_Saving(PADAPTER pAdapter, u8 bForceInNormal); */ 27 | 28 | #endif 29 | -------------------------------------------------------------------------------- /include/rtl8192e_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8192E_LED_H__ 16 | #define __RTL8192E_LED_H__ 17 | 18 | #ifdef CONFIG_RTW_SW_LED 19 | /* ******************************************************************************** 20 | * Interface to manipulate LED objects. 21 | * ******************************************************************************** */ 22 | #ifdef CONFIG_USB_HCI 23 | void rtl8192eu_InitSwLeds(PADAPTER padapter); 24 | void rtl8192eu_DeInitSwLeds(PADAPTER padapter); 25 | #endif 26 | #ifdef CONFIG_PCI_HCI 27 | void rtl8192ee_InitSwLeds(PADAPTER padapter); 28 | void rtl8192ee_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8192es_InitSwLeds(PADAPTER padapter); 32 | void rtl8192es_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | 35 | #endif 36 | #endif/*CONFIG_RTW_SW_LED*/ 37 | -------------------------------------------------------------------------------- /include/rtl8192e_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8192E_RF_H__ 16 | #define __RTL8192E_RF_H__ 17 | 18 | void 19 | PHY_RF6052SetBandwidth8192E( 20 | PADAPTER Adapter, 21 | enum channel_width Bandwidth); 22 | 23 | 24 | int 25 | PHY_RF6052_Config_8192E( 26 | PADAPTER Adapter); 27 | 28 | #endif/* __RTL8192E_RF_H__ */ 29 | -------------------------------------------------------------------------------- /include/rtl8192e_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL88812A_SRESET_H_ 16 | #define _RTL8812A_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8192e_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8192e_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8192f_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2012 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8192F_DM_H__ 16 | #define __RTL8192F_DM_H__ 17 | 18 | void rtl8192f_init_dm_priv(PADAPTER Adapter); 19 | void rtl8192f_deinit_dm_priv(PADAPTER Adapter); 20 | void rtl8192f_InitHalDm(PADAPTER Adapter); 21 | void rtl8192f_HalDmWatchDog(PADAPTER Adapter); 22 | 23 | /* void rtl8192c_dm_CheckTXPowerTracking(PADAPTER Adapter); */ 24 | 25 | /* void rtl8192c_dm_RF_Saving(PADAPTER pAdapter, u8 bForceInNormal); */ 26 | 27 | #endif 28 | -------------------------------------------------------------------------------- /include/rtl8192f_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8192F_SRESET_H_ 16 | #define _RTL8192F_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8192f_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8192f_sreset_linked_status_check(_adapter *padapter); 23 | #endif /* DBG_CONFIG_ERROR_DETECT */ 24 | #endif /* _RTL8192F_SRESET_H_ */ -------------------------------------------------------------------------------- /include/rtl8703b_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8703B_DM_H__ 16 | #define __RTL8703B_DM_H__ 17 | /* ************************************************************ 18 | * Description: 19 | * 20 | * This file is for 8703B dynamic mechanism only 21 | * 22 | * 23 | * ************************************************************ */ 24 | 25 | /* ************************************************************ 26 | * structure and define 27 | * ************************************************************ */ 28 | 29 | /* ************************************************************ 30 | * function prototype 31 | * ************************************************************ */ 32 | 33 | void rtl8703b_init_dm_priv(PADAPTER padapter); 34 | void rtl8703b_deinit_dm_priv(PADAPTER padapter); 35 | 36 | void rtl8703b_InitHalDm(PADAPTER padapter); 37 | void rtl8703b_HalDmWatchDog(PADAPTER padapter); 38 | 39 | #endif 40 | -------------------------------------------------------------------------------- /include/rtl8703b_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8703B_LED_H__ 16 | #define __RTL8703B_LED_H__ 17 | 18 | #include 19 | #include 20 | #include 21 | 22 | #ifdef CONFIG_RTW_SW_LED 23 | /* ******************************************************************************** 24 | * Interface to manipulate LED objects. 25 | * ******************************************************************************** */ 26 | #ifdef CONFIG_USB_HCI 27 | void rtl8703bu_InitSwLeds(PADAPTER padapter); 28 | void rtl8703bu_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8703bs_InitSwLeds(PADAPTER padapter); 32 | void rtl8703bs_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | #ifdef CONFIG_GSPI_HCI 35 | void rtl8703bs_InitSwLeds(PADAPTER padapter); 36 | void rtl8703bs_DeInitSwLeds(PADAPTER padapter); 37 | #endif 38 | #ifdef CONFIG_PCI_HCI 39 | void rtl8703be_InitSwLeds(PADAPTER padapter); 40 | void rtl8703be_DeInitSwLeds(PADAPTER padapter); 41 | #endif 42 | 43 | #endif/*CONFIG_RTW_SW_LED*/ 44 | #endif /*__RTL8703B_LED_H__*/ 45 | -------------------------------------------------------------------------------- /include/rtl8703b_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8703B_RF_H__ 16 | #define __RTL8703B_RF_H__ 17 | 18 | int PHY_RF6052_Config8703B(PADAPTER Adapter); 19 | 20 | void 21 | PHY_RF6052SetBandwidth8703B( 22 | PADAPTER Adapter, 23 | enum channel_width Bandwidth); 24 | 25 | #endif 26 | -------------------------------------------------------------------------------- /include/rtl8703b_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8703B_SRESET_H_ 16 | #define _RTL8703B_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8703b_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8703b_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8710b_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8710B_DM_H__ 16 | #define __RTL8710B_DM_H__ 17 | /* ************************************************************ 18 | * Description: 19 | * 20 | * This file is for 8710B dynamic mechanism only 21 | * 22 | * 23 | * ************************************************************ */ 24 | 25 | /* ************************************************************ 26 | * structure and define 27 | * ************************************************************ */ 28 | 29 | /* ************************************************************ 30 | * function prototype 31 | * ************************************************************ */ 32 | 33 | void rtl8710b_init_dm_priv(PADAPTER padapter); 34 | void rtl8710b_deinit_dm_priv(PADAPTER padapter); 35 | 36 | void rtl8710b_InitHalDm(PADAPTER padapter); 37 | void rtl8710b_HalDmWatchDog(PADAPTER padapter); 38 | 39 | #endif 40 | -------------------------------------------------------------------------------- /include/rtl8710b_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8710B_LED_H__ 16 | #define __RTL8710B_LED_H__ 17 | 18 | #include 19 | #include 20 | #include 21 | 22 | #ifdef CONFIG_RTW_SW_LED 23 | /* ******************************************************************************** 24 | * Interface to manipulate LED objects. 25 | * ******************************************************************************** */ 26 | #ifdef CONFIG_USB_HCI 27 | void rtl8710bu_InitSwLeds(PADAPTER padapter); 28 | void rtl8710bu_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8710bs_InitSwLeds(PADAPTER padapter); 32 | void rtl8710bs_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | #ifdef CONFIG_GSPI_HCI 35 | void rtl8710bs_InitSwLeds(PADAPTER padapter); 36 | void rtl8710bs_DeInitSwLeds(PADAPTER padapter); 37 | #endif 38 | #ifdef CONFIG_PCI_HCI 39 | void rtl8710be_InitSwLeds(PADAPTER padapter); 40 | void rtl8710be_DeInitSwLeds(PADAPTER padapter); 41 | #endif 42 | 43 | #endif /*#ifdef CONFIG_RTW_SW_LED*/ 44 | #endif 45 | -------------------------------------------------------------------------------- /include/rtl8710b_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8710B_RF_H__ 16 | #define __RTL8710B_RF_H__ 17 | 18 | int PHY_RF6052_Config8710B(PADAPTER pdapter); 19 | 20 | #endif 21 | -------------------------------------------------------------------------------- /include/rtl8710b_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8710B_SRESET_H_ 16 | #define _RTL8710B_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8710b_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8710b_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8723b_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723B_DM_H__ 16 | #define __RTL8723B_DM_H__ 17 | /* ************************************************************ 18 | * Description: 19 | * 20 | * This file is for 8723B dynamic mechanism only 21 | * 22 | * 23 | * ************************************************************ */ 24 | 25 | /* ************************************************************ 26 | * structure and define 27 | * ************************************************************ */ 28 | 29 | /* ************************************************************ 30 | * function prototype 31 | * ************************************************************ */ 32 | 33 | void rtl8723b_init_dm_priv(PADAPTER padapter); 34 | void rtl8723b_deinit_dm_priv(PADAPTER padapter); 35 | 36 | void rtl8723b_InitHalDm(PADAPTER padapter); 37 | void rtl8723b_HalDmWatchDog(PADAPTER padapter); 38 | #endif 39 | -------------------------------------------------------------------------------- /include/rtl8723b_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723B_LED_H__ 16 | #define __RTL8723B_LED_H__ 17 | 18 | #include 19 | #include 20 | #include 21 | 22 | #ifdef CONFIG_RTW_SW_LED 23 | /* ******************************************************************************** 24 | * Interface to manipulate LED objects. 25 | * ******************************************************************************** */ 26 | #ifdef CONFIG_USB_HCI 27 | void rtl8723bu_InitSwLeds(PADAPTER padapter); 28 | void rtl8723bu_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8723bs_InitSwLeds(PADAPTER padapter); 32 | void rtl8723bs_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | #ifdef CONFIG_GSPI_HCI 35 | void rtl8723bs_InitSwLeds(PADAPTER padapter); 36 | void rtl8723bs_DeInitSwLeds(PADAPTER padapter); 37 | #endif 38 | #ifdef CONFIG_PCI_HCI 39 | void rtl8723be_InitSwLeds(PADAPTER padapter); 40 | void rtl8723be_DeInitSwLeds(PADAPTER padapter); 41 | #endif 42 | 43 | #endif 44 | #endif/*CONFIG_RTW_SW_LED*/ 45 | -------------------------------------------------------------------------------- /include/rtl8723b_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723B_RF_H__ 16 | #define __RTL8723B_RF_H__ 17 | 18 | int PHY_RF6052_Config8723B(PADAPTER Adapter); 19 | 20 | void 21 | PHY_RF6052SetBandwidth8723B( 22 | PADAPTER Adapter, 23 | enum channel_width Bandwidth); 24 | 25 | #endif 26 | -------------------------------------------------------------------------------- /include/rtl8723b_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8723B_SRESET_H_ 16 | #define _RTL8723B_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8723b_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8723b_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8723d_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723D_DM_H__ 16 | #define __RTL8723D_DM_H__ 17 | /* ************************************************************ 18 | * Description: 19 | * 20 | * This file is for 8723D dynamic mechanism only 21 | * 22 | * 23 | * ************************************************************ */ 24 | 25 | /* ************************************************************ 26 | * structure and define 27 | * ************************************************************ */ 28 | 29 | /* ************************************************************ 30 | * function prototype 31 | * ************************************************************ */ 32 | 33 | void rtl8723d_init_dm_priv(PADAPTER padapter); 34 | void rtl8723d_deinit_dm_priv(PADAPTER padapter); 35 | 36 | void rtl8723d_InitHalDm(PADAPTER padapter); 37 | void rtl8723d_HalDmWatchDog(PADAPTER padapter); 38 | 39 | #endif 40 | -------------------------------------------------------------------------------- /include/rtl8723d_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723D_LED_H__ 16 | #define __RTL8723D_LED_H__ 17 | 18 | #include 19 | #include 20 | #include 21 | 22 | #ifdef CONFIG_RTW_SW_LED 23 | /* ******************************************************************************** 24 | * Interface to manipulate LED objects. 25 | * ******************************************************************************** */ 26 | #ifdef CONFIG_USB_HCI 27 | void rtl8723du_InitSwLeds(PADAPTER padapter); 28 | void rtl8723du_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8723ds_InitSwLeds(PADAPTER padapter); 32 | void rtl8723ds_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | #ifdef CONFIG_GSPI_HCI 35 | void rtl8723ds_InitSwLeds(PADAPTER padapter); 36 | void rtl8723ds_DeInitSwLeds(PADAPTER padapter); 37 | #endif 38 | #ifdef CONFIG_PCI_HCI 39 | void rtl8723de_InitSwLeds(PADAPTER padapter); 40 | void rtl8723de_DeInitSwLeds(PADAPTER padapter); 41 | #endif 42 | 43 | #endif /*#ifdef CONFIG_RTW_SW_LED*/ 44 | #endif 45 | -------------------------------------------------------------------------------- /include/rtl8723d_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8723D_RF_H__ 16 | #define __RTL8723D_RF_H__ 17 | 18 | int PHY_RF6052_Config8723D(PADAPTER pdapter); 19 | 20 | void PHY_RF6052SetBandwidth8723D(PADAPTER Adapter, enum channel_width Bandwidth); 21 | #endif 22 | -------------------------------------------------------------------------------- /include/rtl8723d_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8723D_SRESET_H_ 16 | #define _RTL8723D_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8723d_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8723d_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8723fs_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2019 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8723FS_HAL_H_ 16 | #define _RTL8723FS_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8723fs_ops.c */ 21 | void rtl8723fs_set_hal_ops(PADAPTER); 22 | 23 | #if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN) 24 | void rtl8723fs_disable_interrupt_but_cpwm2(PADAPTER adapter); 25 | #endif 26 | 27 | /* rtl8723fs_xmit.c */ 28 | s32 rtl8723fs_dequeue_writeport(PADAPTER); 29 | #define _dequeue_writeport(a) rtl8723fs_dequeue_writeport(a) 30 | 31 | #endif /* _RTL8723FS_HAL_H_ */ 32 | -------------------------------------------------------------------------------- /include/rtl8723fu_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2019 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8723FU_HAL_H_ 16 | #define _RTL8723FU_HAL_H_ 17 | 18 | #ifdef CONFIG_USB_HCI 19 | #include /* PADAPTER */ 20 | 21 | #ifdef CONFIG_USB_HCI 22 | #ifdef USB_PACKET_OFFSET_SZ 23 | #define PACKET_OFFSET_SZ (USB_PACKET_OFFSET_SZ) 24 | #else 25 | #define PACKET_OFFSET_SZ (8) 26 | #endif 27 | #define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ) 28 | #endif 29 | 30 | /* undefine MAX_RECVBUF_SZ from rtl8723f_hal.h */ 31 | #ifdef MAX_RECVBUF_SZ 32 | #undef MAX_RECVBUF_SZ 33 | #endif 34 | 35 | /* recv_buffer must be large than usb agg size */ 36 | #ifndef MAX_RECVBUF_SZ 37 | #ifndef CONFIG_MINIMAL_MEMORY_USAGE 38 | #ifdef CONFIG_PLATFORM_NOVATEK_NT72668 39 | #define MAX_RECVBUF_SZ (15360) /* 15k */ 40 | #elif defined(CONFIG_PLATFORM_HISILICON) 41 | /* use 16k to workaround for HISILICON platform */ 42 | #define MAX_RECVBUF_SZ (16384) 43 | #else 44 | #define MAX_RECVBUF_SZ (32768) 45 | #endif 46 | #else 47 | #define MAX_RECVBUF_SZ (4000) 48 | #endif 49 | #endif /* !MAX_RECVBUF_SZ */ 50 | 51 | /* rtl8723fu_ops.c */ 52 | void rtl8723fu_set_hal_ops(PADAPTER padapter); 53 | void rtl8723fu_set_hw_type(struct dvobj_priv *pdvobj); 54 | 55 | /* rtl8723fu_io.c */ 56 | void rtl8723fu_set_intf_ops(struct _io_ops *pops); 57 | 58 | #endif /* CONFIG_USB_HCI */ 59 | 60 | 61 | #endif /* _RTL8723FU_HAL_H_ */ 62 | -------------------------------------------------------------------------------- /include/rtl8812a_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8812A_DM_H__ 16 | #define __RTL8812A_DM_H__ 17 | 18 | void rtl8812_init_dm_priv(PADAPTER Adapter); 19 | void rtl8812_deinit_dm_priv(PADAPTER Adapter); 20 | void rtl8812_InitHalDm(PADAPTER Adapter); 21 | void rtl8812_HalDmWatchDog(PADAPTER Adapter); 22 | 23 | /* void rtl8192c_dm_CheckTXPowerTracking(PADAPTER Adapter); */ 24 | 25 | /* void rtl8192c_dm_RF_Saving(PADAPTER pAdapter, u8 bForceInNormal); */ 26 | 27 | #endif 28 | -------------------------------------------------------------------------------- /include/rtl8812a_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8812A_LED_H__ 16 | #define __RTL8812A_LED_H__ 17 | #ifdef CONFIG_RTW_LED 18 | #ifdef CONFIG_RTW_SW_LED 19 | /* ******************************************************************************** 20 | * Interface to manipulate LED objects. 21 | * ******************************************************************************** */ 22 | #ifdef CONFIG_USB_HCI 23 | void rtl8812au_InitSwLeds(PADAPTER padapter); 24 | void rtl8812au_DeInitSwLeds(PADAPTER padapter); 25 | #endif 26 | #ifdef CONFIG_PCI_HCI 27 | void rtl8812ae_InitSwLeds(PADAPTER padapter); 28 | void rtl8812ae_DeInitSwLeds(PADAPTER padapter); 29 | #endif 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8821as_InitSwLeds(PADAPTER padapter); 32 | void rtl8821as_DeInitSwLeds(PADAPTER padapter); 33 | #endif 34 | #endif/*CONFIG_RTW_SW_LED*/ 35 | #endif/*#ifdef CONFIG_RTW_LED*/ 36 | 37 | #ifdef CONFIG_SDIO_HCI 38 | void rtl8821as_init_led_circuit(PADAPTER adapter); 39 | #endif 40 | 41 | #endif /*__RTL8812A_LED_H__*/ 42 | -------------------------------------------------------------------------------- /include/rtl8812a_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8812A_RF_H__ 16 | #define __RTL8812A_RF_H__ 17 | 18 | void 19 | PHY_RF6052SetBandwidth8812( 20 | PADAPTER Adapter, 21 | enum channel_width Bandwidth); 22 | 23 | 24 | int 25 | PHY_RF6052_Config_8812( 26 | PADAPTER Adapter); 27 | 28 | #endif/* __RTL8188E_RF_H__ */ 29 | -------------------------------------------------------------------------------- /include/rtl8812a_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL88812A_SRESET_H_ 16 | #define _RTL8812A_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8812_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8812_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8814a_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8814A_DM_H__ 16 | #define __RTL8814A_DM_H__ 17 | 18 | void rtl8814_init_dm_priv(PADAPTER Adapter); 19 | void rtl8814_deinit_dm_priv(PADAPTER Adapter); 20 | void rtl8814_InitHalDm(PADAPTER Adapter); 21 | void rtl8814_HalDmWatchDog(PADAPTER Adapter); 22 | 23 | #endif 24 | -------------------------------------------------------------------------------- /include/rtl8814a_led.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8814A_LED_H__ 16 | #define __RTL8814A_LED_H__ 17 | 18 | #ifdef CONFIG_RTW_SW_LED 19 | /* ******************************************************************************** 20 | * Interface to manipulate LED objects. 21 | * ******************************************************************************** */ 22 | #ifdef CONFIG_USB_HCI 23 | void rtl8814au_InitSwLeds(PADAPTER padapter); 24 | void rtl8814au_DeInitSwLeds(PADAPTER padapter); 25 | #endif /* CONFIG_USB_HCI */ 26 | #ifdef CONFIG_PCI_HCI 27 | void rtl8814ae_InitSwLeds(PADAPTER padapter); 28 | void rtl8814ae_DeInitSwLeds(PADAPTER padapter); 29 | #endif /* CONFIG_PCI_HCI */ 30 | #ifdef CONFIG_SDIO_HCI 31 | void rtl8814s_InitSwLeds(PADAPTER padapter); 32 | void rtl8814s_DeInitSwLeds(PADAPTER padapter); 33 | #endif /* CONFIG_SDIO_HCI */ 34 | 35 | #endif /* __RTL8814A_LED_H__ */ 36 | #endif /*CONFIG_RTW_SW_LED*/ 37 | -------------------------------------------------------------------------------- /include/rtl8814a_rf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8814A_RF_H__ 16 | #define __RTL8814A_RF_H__ 17 | 18 | void 19 | PHY_RF6052SetBandwidth8814A( 20 | PADAPTER Adapter, 21 | enum channel_width Bandwidth); 22 | 23 | 24 | int 25 | PHY_RF6052_Config_8814A( 26 | PADAPTER Adapter); 27 | 28 | #endif/* __RTL8188E_RF_H__ */ 29 | -------------------------------------------------------------------------------- /include/rtl8814a_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL88814A_SRESET_H_ 16 | #define _RTL8814A_SRESET_H_ 17 | 18 | #include 19 | 20 | #ifdef DBG_CONFIG_ERROR_DETECT 21 | extern void rtl8814_sreset_xmit_status_check(_adapter *padapter); 22 | extern void rtl8814_sreset_linked_status_check(_adapter *padapter); 23 | #endif 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtl8814be_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8814BE_HAL_H_ 16 | #define _RTL8814BE_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | #define RT_BCN_INT_MASKS (BIT_BCNDMAINT0_MSK_8814B | \ 21 | BIT_TXBCN0OK_MSK_8814B | \ 22 | BIT_TXBCN0ERR_MSK_8814B | \ 23 | BIT_BCNDERR0_MSK_8814B) 24 | 25 | /* rtl8814be_ops.c */ 26 | void UpdateInterruptMask8814BE(PADAPTER, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); 27 | u16 get_txbd_rw_reg(u16 q_idx); 28 | 29 | 30 | #endif /* _RTL8814BE_HAL_H_ */ 31 | -------------------------------------------------------------------------------- /include/rtl8814bu_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8814BU_HAL_H_ 16 | #define _RTL8814BU_HAL_H_ 17 | 18 | #ifdef CONFIG_USB_HCI 19 | #include /* PADAPTER */ 20 | 21 | #ifdef CONFIG_USB_HCI 22 | #ifdef USB_PACKET_OFFSET_SZ 23 | #define PACKET_OFFSET_SZ (USB_PACKET_OFFSET_SZ) 24 | #else 25 | #define PACKET_OFFSET_SZ (8) 26 | #endif 27 | #define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ) 28 | #endif 29 | 30 | /* undefine MAX_RECVBUF_SZ from rtl8822c_hal.h */ 31 | #ifdef MAX_RECVBUF_SZ 32 | #undef MAX_RECVBUF_SZ 33 | #endif 34 | 35 | /* recv_buffer must be large than usb agg size */ 36 | #ifndef MAX_RECVBUF_SZ 37 | #ifndef CONFIG_MINIMAL_MEMORY_USAGE 38 | #ifdef CONFIG_PLATFORM_NOVATEK_NT72668 39 | #define MAX_RECVBUF_SZ (15360) /* 15k */ 40 | #elif defined(CONFIG_PLATFORM_HISILICON) 41 | /* use 16k to workaround for HISILICON platform */ 42 | #define MAX_RECVBUF_SZ (16384) 43 | #else 44 | #define MAX_RECVBUF_SZ (32768) 45 | #endif 46 | #else 47 | #define MAX_RECVBUF_SZ (4000) 48 | #endif 49 | #endif /* !MAX_RECVBUF_SZ */ 50 | 51 | /* rtl8814bu_ops.c */ 52 | void rtl8814bu_set_hal_ops(PADAPTER padapter); 53 | void rtl8814bu_set_hw_type(struct dvobj_priv *pdvobj); 54 | 55 | /* rtl8814bu_io.c */ 56 | void rtl8814bu_set_intf_ops(struct _io_ops *pops); 57 | 58 | #endif /* CONFIG_USB_HCI */ 59 | 60 | 61 | #endif /* _RTL8814BU_HAL_H_ */ 62 | -------------------------------------------------------------------------------- /include/rtl8821c_dm.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTL8812C_DM_H__ 16 | #define __RTL8812C_DM_H__ 17 | 18 | void rtl8821c_phy_init_dm_priv(PADAPTER); 19 | void rtl8821c_phy_deinit_dm_priv(PADAPTER); 20 | void rtl8821c_phy_init_haldm(PADAPTER); 21 | void rtl8821c_phy_haldm_watchdog(PADAPTER); 22 | 23 | #endif 24 | -------------------------------------------------------------------------------- /include/rtl8821ce_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8821CE_HAL_H_ 16 | #define _RTL8821CE_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8821ce_ops.c */ 21 | void rtl8821ce_set_hal_ops(PADAPTER); 22 | 23 | #endif /* _RTL8821CE_HAL_H_ */ 24 | -------------------------------------------------------------------------------- /include/rtl8821cs_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8821CS_HAL_H_ 16 | #define _RTL8821CS_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8821cs_ops.c */ 21 | u8 rtl8821cs_set_hal_ops(PADAPTER); 22 | 23 | #endif /* _RTL8821CS_HAL_H_ */ 24 | -------------------------------------------------------------------------------- /include/rtl8821cu_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8821CU_HAL_H_ 16 | #define _RTL8821CU_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8821cu_ops.c */ 21 | u8 rtl8821cu_set_hal_ops(PADAPTER); 22 | void rtl8821cu_set_hw_type(struct dvobj_priv *pdvobj); 23 | 24 | #endif /* _RTL8821CU_HAL_H_ */ 25 | -------------------------------------------------------------------------------- /include/rtl8822be_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822BE_HAL_H_ 16 | #define _RTL8822BE_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | #define RT_BCN_INT_MASKS (BIT20 | BIT25 | BIT26 | BIT16) 21 | 22 | /* rtl8822be_ops.c */ 23 | void UpdateInterruptMask8822BE(PADAPTER, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); 24 | u16 get_txbd_rw_reg(u16 q_idx); 25 | 26 | 27 | #endif /* _RTL8822BE_HAL_H_ */ 28 | -------------------------------------------------------------------------------- /include/rtl8822bs_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822BS_HAL_H_ 16 | #define _RTL8822BS_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8822bs_ops.c */ 21 | void rtl8822bs_set_hal_ops(PADAPTER); 22 | 23 | #if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN) 24 | void rtl8822bs_disable_interrupt_but_cpwm2(PADAPTER adapter); 25 | #endif 26 | 27 | /* rtl8822bs_xmit.c */ 28 | s32 rtl8822bs_dequeue_writeport(PADAPTER); 29 | #define _dequeue_writeport(a) rtl8822bs_dequeue_writeport(a) 30 | 31 | #endif /* _RTL8822BS_HAL_H_ */ 32 | -------------------------------------------------------------------------------- /include/rtl8822bu_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822BU_HAL_H_ 16 | #define _RTL8822BU_HAL_H_ 17 | 18 | #ifdef CONFIG_USB_HCI 19 | #include /* PADAPTER */ 20 | 21 | #ifdef CONFIG_USB_HCI 22 | #ifdef USB_PACKET_OFFSET_SZ 23 | #define PACKET_OFFSET_SZ (USB_PACKET_OFFSET_SZ) 24 | #else 25 | #define PACKET_OFFSET_SZ (8) 26 | #endif 27 | #define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ) 28 | #endif 29 | 30 | /* undefine MAX_RECVBUF_SZ from rtl8822b_hal.h */ 31 | #ifdef MAX_RECVBUF_SZ 32 | #undef MAX_RECVBUF_SZ 33 | #endif 34 | 35 | /* recv_buffer must be large than usb agg size */ 36 | #ifndef MAX_RECVBUF_SZ 37 | #ifndef CONFIG_MINIMAL_MEMORY_USAGE 38 | #ifdef CONFIG_PLATFORM_NOVATEK_NT72668 39 | #define MAX_RECVBUF_SZ (15360) /* 15k */ 40 | #elif defined(CONFIG_PLATFORM_HISILICON) 41 | /* use 16k to workaround for HISILICON platform */ 42 | #define MAX_RECVBUF_SZ (16384) 43 | #else 44 | #define MAX_RECVBUF_SZ (32768) 45 | #endif 46 | #else 47 | #define MAX_RECVBUF_SZ (4000) 48 | #endif 49 | #endif /* !MAX_RECVBUF_SZ */ 50 | 51 | /* rtl8822bu_ops.c */ 52 | void rtl8822bu_set_hal_ops(PADAPTER padapter); 53 | void rtl8822bu_set_hw_type(struct dvobj_priv *pdvobj); 54 | 55 | /* rtl8822bu_io.c */ 56 | void rtl8822bu_set_intf_ops(struct _io_ops *pops); 57 | 58 | #endif /* CONFIG_USB_HCI */ 59 | 60 | 61 | #endif /* _RTL8822BU_HAL_H_ */ 62 | -------------------------------------------------------------------------------- /include/rtl8822ce_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822CE_HAL_H_ 16 | #define _RTL8822CE_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | #define RT_BCN_INT_MASKS (BIT20 | BIT25 | BIT26 | BIT16) 21 | 22 | /* rtl8822ce_ops.c */ 23 | void UpdateInterruptMask8822CE(PADAPTER, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); 24 | u16 get_txbd_rw_reg(u16 q_idx); 25 | 26 | 27 | #endif /* _RTL8822CE_HAL_H_ */ 28 | -------------------------------------------------------------------------------- /include/rtl8822cs_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822CS_HAL_H_ 16 | #define _RTL8822CS_HAL_H_ 17 | 18 | #include /* PADAPTER */ 19 | 20 | /* rtl8822cs_ops.c */ 21 | void rtl8822cs_set_hal_ops(PADAPTER); 22 | 23 | #if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN) 24 | void rtl8822cs_disable_interrupt_but_cpwm2(PADAPTER adapter); 25 | #endif 26 | 27 | /* rtl8822cs_xmit.c */ 28 | s32 rtl8822cs_dequeue_writeport(PADAPTER); 29 | #define _dequeue_writeport(a) rtl8822cs_dequeue_writeport(a) 30 | 31 | #endif /* _RTL8822CS_HAL_H_ */ 32 | -------------------------------------------------------------------------------- /include/rtl8822cu_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL8822CU_HAL_H_ 16 | #define _RTL8822CU_HAL_H_ 17 | 18 | #ifdef CONFIG_USB_HCI 19 | #include /* PADAPTER */ 20 | 21 | #ifdef CONFIG_USB_HCI 22 | #ifdef USB_PACKET_OFFSET_SZ 23 | #define PACKET_OFFSET_SZ (USB_PACKET_OFFSET_SZ) 24 | #else 25 | #define PACKET_OFFSET_SZ (8) 26 | #endif 27 | #define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ) 28 | #endif 29 | 30 | /* undefine MAX_RECVBUF_SZ from rtl8822c_hal.h */ 31 | #ifdef MAX_RECVBUF_SZ 32 | #undef MAX_RECVBUF_SZ 33 | #endif 34 | 35 | /* recv_buffer must be large than usb agg size */ 36 | #ifndef MAX_RECVBUF_SZ 37 | #ifndef CONFIG_MINIMAL_MEMORY_USAGE 38 | #ifdef CONFIG_PLATFORM_NOVATEK_NT72668 39 | #define MAX_RECVBUF_SZ (15360) /* 15k */ 40 | #elif defined(CONFIG_PLATFORM_HISILICON) 41 | /* use 16k to workaround for HISILICON platform */ 42 | #define MAX_RECVBUF_SZ (16384) 43 | #else 44 | #define MAX_RECVBUF_SZ (32768) 45 | #endif 46 | #else 47 | #define MAX_RECVBUF_SZ (4000) 48 | #endif 49 | #endif /* !MAX_RECVBUF_SZ */ 50 | 51 | /* rtl8822cu_ops.c */ 52 | void rtl8822cu_set_hal_ops(PADAPTER padapter); 53 | void rtl8822cu_set_hw_type(struct dvobj_priv *pdvobj); 54 | 55 | /* rtl8822cu_io.c */ 56 | void rtl8822cu_set_intf_ops(struct _io_ops *pops); 57 | 58 | #endif /* CONFIG_USB_HCI */ 59 | 60 | 61 | #endif /* _RTL8822CU_HAL_H_ */ 62 | -------------------------------------------------------------------------------- /include/rtw_btcoex_wifionly.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTW_BTCOEX_WIFIONLY_H__ 16 | #define __RTW_BTCOEX_WIFIONLY_H__ 17 | 18 | void rtw_btcoex_wifionly_switchband_notify(PADAPTER padapter); 19 | void rtw_btcoex_wifionly_scan_notify(PADAPTER padapter); 20 | void rtw_btcoex_wifionly_connect_notify(PADAPTER padapter); 21 | void rtw_btcoex_wifionly_hw_config(PADAPTER padapter); 22 | void rtw_btcoex_wifionly_initialize(PADAPTER padapter); 23 | void rtw_btcoex_wifionly_AntInfoSetting(PADAPTER padapter); 24 | #endif 25 | -------------------------------------------------------------------------------- /include/rtw_byteorder.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTL871X_BYTEORDER_H_ 16 | #define _RTL871X_BYTEORDER_H_ 17 | 18 | 19 | #if defined(CONFIG_LITTLE_ENDIAN) && defined (CONFIG_BIG_ENDIAN) 20 | #error "Shall be CONFIG_LITTLE_ENDIAN or CONFIG_BIG_ENDIAN, but not both!\n" 21 | #endif 22 | 23 | #if defined(CONFIG_LITTLE_ENDIAN) 24 | #ifndef CONFIG_PLATFORM_MSTAR389 25 | #include 26 | #endif 27 | #elif defined (CONFIG_BIG_ENDIAN) 28 | #include 29 | #else 30 | # error "Must be LITTLE/BIG Endian Host" 31 | #endif 32 | 33 | #endif /* _RTL871X_BYTEORDER_H_ */ 34 | -------------------------------------------------------------------------------- /include/rtw_ioctl.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTW_IOCTL_H_ 16 | #define _RTW_IOCTL_H_ 17 | 18 | enum oid_type { 19 | QUERY_OID, 20 | SET_OID 21 | }; 22 | 23 | struct oid_par_priv { 24 | void *adapter_context; 25 | NDIS_OID oid; 26 | void *information_buf; 27 | u32 information_buf_len; 28 | u32 *bytes_rw; 29 | u32 *bytes_needed; 30 | enum oid_type type_of_oid; 31 | u32 dbg; 32 | }; 33 | 34 | #if defined(PLATFORM_LINUX) && defined(CONFIG_WIRELESS_EXT) 35 | extern struct iw_handler_def rtw_handlers_def; 36 | #endif 37 | 38 | extern void rtw_request_wps_pbc_event(_adapter *padapter); 39 | 40 | #ifdef CONFIG_APPEND_VENDOR_IE_ENABLE 41 | extern int rtw_vendor_ie_get_raw_data(struct net_device *, u32, char *, u32); 42 | extern int rtw_vendor_ie_get_data(struct net_device*, int , char*); 43 | extern int rtw_vendor_ie_get(struct net_device *, struct iw_request_info *, union iwreq_data *, char *); 44 | extern int rtw_vendor_ie_set(struct net_device*, struct iw_request_info*, union iwreq_data*, char*); 45 | #endif 46 | 47 | #endif /* #ifndef __INC_CEINFO_ */ 48 | -------------------------------------------------------------------------------- /include/rtw_ioctl_query.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTW_IOCTL_QUERY_H_ 16 | #define _RTW_IOCTL_QUERY_H_ 17 | 18 | 19 | #endif 20 | -------------------------------------------------------------------------------- /include/rtw_ioctl_set.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2019 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTW_IOCTL_SET_H_ 16 | #define __RTW_IOCTL_SET_H_ 17 | 18 | u8 rtw_set_802_11_authentication_mode(_adapter *pdapter, NDIS_802_11_AUTHENTICATION_MODE authmode); 19 | u8 rtw_set_802_11_bssid(_adapter *padapter, u8 *bssid); 20 | u8 rtw_set_802_11_add_wep(_adapter *padapter, NDIS_802_11_WEP *wep); 21 | u8 rtw_set_802_11_disassociate(_adapter *padapter); 22 | u8 rtw_set_802_11_bssid_list_scan(_adapter *padapter, struct sitesurvey_parm *pparm); 23 | #ifdef CONFIG_RTW_ACS 24 | u8 rtw_set_acs_sitesurvey(_adapter *adapter); 25 | #endif 26 | u8 rtw_set_802_11_infrastructure_mode(_adapter *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype, u8 flags); 27 | u8 rtw_set_802_11_ssid(_adapter *padapter, NDIS_802_11_SSID *ssid); 28 | u8 rtw_set_802_11_connect(_adapter *padapter, 29 | u8 *bssid, NDIS_802_11_SSID *ssid, u16 ch); 30 | 31 | u8 rtw_validate_bssid(u8 *bssid); 32 | u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid); 33 | 34 | u16 rtw_get_cur_max_rate(_adapter *adapter); 35 | int rtw_set_scan_mode(_adapter *adapter, RT_SCAN_TYPE scan_mode); 36 | int rtw_set_channel_plan(_adapter *adapter, u8 channel_plan); 37 | int rtw_set_country(_adapter *adapter, const char *country_code); 38 | int rtw_set_band(_adapter *adapter, u8 band); 39 | 40 | #endif 41 | -------------------------------------------------------------------------------- /include/rtw_mem.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2019 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __RTW_MEM_H__ 16 | #define __RTW_MEM_H__ 17 | 18 | #include 19 | #include 20 | #include 21 | 22 | u16 rtw_rtkm_get_buff_size(void); 23 | u8 rtw_rtkm_get_nr_recv_skb(void); 24 | struct u8 *rtw_alloc_revcbuf_premem(void); 25 | struct sk_buff *rtw_alloc_skb_premem(u16 in_size); 26 | int rtw_free_skb_premem(struct sk_buff *pskb); 27 | 28 | 29 | #endif /* __RTW_MEM_H__ */ 30 | -------------------------------------------------------------------------------- /include/rtw_sdio.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2015 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTW_SDIO_H_ 16 | #define _RTW_SDIO_H_ 17 | 18 | #include /* struct dvobj_priv and etc. */ 19 | 20 | u8 rtw_sdio_read_cmd52(struct dvobj_priv *, u32 addr, void *buf, size_t len); 21 | u8 rtw_sdio_read_cmd53(struct dvobj_priv *, u32 addr, void *buf, size_t len); 22 | u8 rtw_sdio_write_cmd52(struct dvobj_priv *, u32 addr, void *buf, size_t len); 23 | u8 rtw_sdio_write_cmd53(struct dvobj_priv *, u32 addr, void *buf, size_t len); 24 | u8 rtw_sdio_f0_read(struct dvobj_priv *, u32 addr, void *buf, size_t len); 25 | 26 | #endif /* _RTW_SDIO_H_ */ 27 | -------------------------------------------------------------------------------- /include/rtw_sreset.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _RTW_SRESET_H_ 16 | #define _RTW_SRESET_H_ 17 | 18 | /* #include */ 19 | 20 | enum { 21 | SRESET_TGP_NULL = 0, 22 | SRESET_TGP_XMIT_STATUS = 1, 23 | SRESET_TGP_LINK_STATUS = 2, 24 | SRESET_TGP_INFO = 99, 25 | }; 26 | 27 | struct sreset_priv { 28 | _mutex silentreset_mutex; 29 | u8 silent_reset_inprogress; 30 | u8 Wifi_Error_Status; 31 | systime last_tx_time; 32 | systime last_tx_complete_time; 33 | 34 | s32 dbg_trigger_point; 35 | u64 self_dect_tx_cnt; 36 | u64 self_dect_rx_cnt; 37 | u64 self_dect_fw_cnt; 38 | u64 tx_dma_status_cnt; 39 | u64 rx_dma_status_cnt; 40 | u8 rx_cnt; 41 | u8 self_dect_fw; 42 | u8 self_dect_case; 43 | u16 last_mac_rxff_ptr; 44 | u8 dbg_sreset_ctrl; 45 | }; 46 | 47 | 48 | 49 | #define WIFI_STATUS_SUCCESS 0 50 | #define USB_VEN_REQ_CMD_FAIL BIT0 51 | #define USB_READ_PORT_FAIL BIT1 52 | #define USB_WRITE_PORT_FAIL BIT2 53 | #define WIFI_MAC_TXDMA_ERROR BIT3 54 | #define WIFI_TX_HANG BIT4 55 | #define WIFI_RX_HANG BIT5 56 | #define WIFI_IF_NOT_EXIST BIT6 57 | 58 | void sreset_init_value(_adapter *padapter); 59 | void sreset_reset_value(_adapter *padapter); 60 | u8 sreset_get_wifi_status(_adapter *padapter); 61 | void sreset_set_wifi_error_status(_adapter *padapter, u32 status); 62 | void sreset_set_trigger_point(_adapter *padapter, s32 tgp); 63 | bool sreset_inprogress(_adapter *padapter); 64 | void sreset_reset(_adapter *padapter); 65 | 66 | #endif 67 | -------------------------------------------------------------------------------- /include/rtw_swcrypto.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | #ifndef __RTW_SWCRYPTO_H_ 17 | #define __RTW_SWCRYPTO_H_ 18 | 19 | #define NEW_CRYPTO 1 20 | 21 | int _rtw_ccmp_encrypt(_adapter *padapter, u8 *key, u32 key_len, uint hdrlen, u8 *frame, uint plen); 22 | int _rtw_ccmp_decrypt(_adapter *padapter, u8 *key, u32 key_len, uint hdrlen, u8 *frame, uint plen); 23 | 24 | int _rtw_gcmp_encrypt(_adapter *padapter, u8 *key, u32 key_len, uint hdrlen, u8 *frame, uint plen); 25 | int _rtw_gcmp_decrypt(_adapter *padapter, u8 *key, u32 key_len, uint hdrlen, u8 *frame, uint plen); 26 | 27 | #ifdef CONFIG_RTW_MESH_AEK 28 | int _aes_siv_encrypt(const u8 *key, size_t key_len, 29 | const u8 *pw, size_t pwlen, 30 | size_t num_elem, const u8 *addr[], const size_t *len, u8 *out); 31 | int _aes_siv_decrypt(const u8 *key, size_t key_len, 32 | const u8 *iv_crypt, size_t iv_c_len, 33 | size_t num_elem, const u8 *addr[], const size_t *len, u8 *out); 34 | #endif 35 | 36 | #if defined(CONFIG_IEEE80211W) | defined(CONFIG_TDLS) 37 | u8 _bip_ccmp_protect(const u8 *key, size_t key_len, 38 | const u8 *data, size_t data_len, u8 *mic); 39 | u8 _bip_gcmp_protect(u8 *whdr_pos, size_t len, 40 | const u8 *key, size_t key_len, 41 | const u8 *data, size_t data_len, u8 *mic); 42 | #endif /* CONFIG_IEEE80211W */ 43 | 44 | #ifdef CONFIG_TDLS 45 | void _tdls_generate_tpk(void *sta, const u8 *own_addr, const u8 *bssid); 46 | #endif /* CONFIG_TDLS */ 47 | 48 | #endif /* __RTW_SWCRYPTO_H_ */ 49 | 50 | -------------------------------------------------------------------------------- /include/rtw_version.h: -------------------------------------------------------------------------------- 1 | #define DRIVERVERSION "v5.12.0.4-1-g9241a6516.20210916_COEX20200730-5151" 2 | #define BTCOEXVERSION "COEX20200730-5151" 3 | -------------------------------------------------------------------------------- /include/sdio_hal.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __SDIO_HAL_H__ 16 | #define __SDIO_HAL_H__ 17 | 18 | void sd_int_dpc(PADAPTER padapter); 19 | u8 rtw_set_hal_ops(_adapter *padapter); 20 | 21 | #ifdef CONFIG_RTL8188E 22 | void rtl8188es_set_hal_ops(PADAPTER padapter); 23 | #endif 24 | 25 | #ifdef CONFIG_RTL8723B 26 | void rtl8723bs_set_hal_ops(PADAPTER padapter); 27 | #endif 28 | 29 | #ifdef CONFIG_RTL8821A 30 | void rtl8821as_set_hal_ops(PADAPTER padapter); 31 | #endif 32 | 33 | #ifdef CONFIG_RTL8192E 34 | void rtl8192es_set_hal_ops(PADAPTER padapter); 35 | #endif 36 | 37 | #ifdef CONFIG_RTL8703B 38 | void rtl8703bs_set_hal_ops(PADAPTER padapter); 39 | #endif 40 | 41 | #ifdef CONFIG_RTL8723D 42 | void rtl8723ds_set_hal_ops(PADAPTER padapter); 43 | #endif 44 | 45 | #ifdef CONFIG_RTL8188F 46 | void rtl8188fs_set_hal_ops(PADAPTER padapter); 47 | #endif 48 | 49 | #ifdef CONFIG_RTL8188GTV 50 | void rtl8188gtvs_set_hal_ops(PADAPTER padapter); 51 | #endif 52 | 53 | #ifdef CONFIG_RTL8192F 54 | void rtl8192fs_set_hal_ops(PADAPTER padapter); 55 | #endif 56 | 57 | #endif /* __SDIO_HAL_H__ */ 58 | -------------------------------------------------------------------------------- /include/sdio_ops_ce.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _SDIO_OPS_WINCE_H_ 16 | #define _SDIO_OPS_WINCE_H_ 17 | 18 | #include 19 | #include 20 | #include 21 | #include 22 | 23 | 24 | #ifdef PLATFORM_OS_CE 25 | 26 | 27 | extern u8 sdbus_cmd52r_ce(struct intf_priv *pintfpriv, u32 addr); 28 | 29 | 30 | extern void sdbus_cmd52w_ce(struct intf_priv *pintfpriv, u32 addr, u8 val8); 31 | 32 | 33 | uint sdbus_read_blocks_to_membuf_ce(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 34 | 35 | extern uint sdbus_read_bytes_to_membuf_ce(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 36 | 37 | 38 | extern uint sdbus_write_blocks_from_membuf_ce(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf, u8 async); 39 | 40 | extern uint sdbus_write_bytes_from_membuf_ce(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 41 | extern u8 sdbus_func1cmd52r_ce(struct intf_priv *pintfpriv, u32 addr); 42 | extern void sdbus_func1cmd52w_ce(struct intf_priv *pintfpriv, u32 addr, u8 val8); 43 | extern uint sdbus_read_reg(struct intf_priv *pintfpriv, u32 addr, u32 cnt, void *pdata); 44 | extern uint sdbus_write_reg(struct intf_priv *pintfpriv, u32 addr, u32 cnt, void *pdata); 45 | extern void sdio_read_int(_adapter *padapter, u32 addr, u8 sz, void *pdata); 46 | 47 | #endif 48 | 49 | #endif 50 | -------------------------------------------------------------------------------- /include/sdio_ops_xp.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _SDIO_OPS_XP_H_ 16 | #define _SDIO_OPS_XP_H_ 17 | 18 | #include 19 | #include 20 | #include 21 | #include 22 | 23 | 24 | #ifdef PLATFORM_OS_XP 25 | 26 | 27 | extern u8 sdbus_cmd52r_xp(struct intf_priv *pintfpriv, u32 addr); 28 | 29 | 30 | extern void sdbus_cmd52w_xp(struct intf_priv *pintfpriv, u32 addr, u8 val8); 31 | 32 | 33 | uint sdbus_read_blocks_to_membuf_xp(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 34 | 35 | extern uint sdbus_read_bytes_to_membuf_xp(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 36 | 37 | 38 | extern uint sdbus_write_blocks_from_membuf_xp(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf, u8 async); 39 | 40 | extern uint sdbus_write_bytes_from_membuf_xp(struct intf_priv *pintfpriv, u32 addr, u32 cnt, u8 *pbuf); 41 | extern u8 sdbus_func1cmd52r_xp(struct intf_priv *pintfpriv, u32 addr); 42 | extern void sdbus_func1cmd52w_xp(struct intf_priv *pintfpriv, u32 addr, u8 val8); 43 | extern uint sdbus_read_reg(struct intf_priv *pintfpriv, u32 addr, u32 cnt, void *pdata); 44 | extern uint sdbus_write_reg(struct intf_priv *pintfpriv, u32 addr, u32 cnt, void *pdata); 45 | extern void sdio_read_int(_adapter *padapter, u32 addr, u8 sz, void *pdata); 46 | 47 | #endif 48 | 49 | #endif 50 | -------------------------------------------------------------------------------- /include/sdio_osintf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __SDIO_OSINTF_H__ 16 | #define __SDIO_OSINTF_H__ 17 | 18 | 19 | #endif 20 | -------------------------------------------------------------------------------- /include/usb_osintf.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __USB_OSINTF_H 16 | #define __USB_OSINTF_H 17 | 18 | #include 19 | 20 | #define USBD_HALTED(Status) ((u32)(Status) >> 30 == 3) 21 | 22 | 23 | u8 usbvendorrequest(struct dvobj_priv *pdvobjpriv, RT_USB_BREQUEST brequest, RT_USB_WVALUE wvalue, u8 windex, void *data, u8 datalen, u8 isdirectionin); 24 | 25 | 26 | #endif 27 | -------------------------------------------------------------------------------- /include/usb_vendor_req.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2007 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef _USB_VENDOR_REQUEST_H_ 16 | #define _USB_VENDOR_REQUEST_H_ 17 | 18 | /* 4 Set/Get Register related wIndex/Data */ 19 | #define RT_USB_RESET_MASK_OFF 0 20 | #define RT_USB_RESET_MASK_ON 1 21 | #define RT_USB_SLEEP_MASK_OFF 0 22 | #define RT_USB_SLEEP_MASK_ON 1 23 | #define RT_USB_LDO_ON 1 24 | #define RT_USB_LDO_OFF 0 25 | 26 | /* 4 Set/Get SYSCLK related wValue or Data */ 27 | #define RT_USB_SYSCLK_32KHZ 0 28 | #define RT_USB_SYSCLK_40MHZ 1 29 | #define RT_USB_SYSCLK_60MHZ 2 30 | 31 | 32 | typedef enum _RT_USB_BREQUEST { 33 | RT_USB_SET_REGISTER = 1, 34 | RT_USB_SET_SYSCLK = 2, 35 | RT_USB_GET_SYSCLK = 3, 36 | RT_USB_GET_REGISTER = 4 37 | } RT_USB_BREQUEST; 38 | 39 | 40 | typedef enum _RT_USB_WVALUE { 41 | RT_USB_RESET_MASK = 1, 42 | RT_USB_SLEEP_MASK = 2, 43 | RT_USB_USB_HRCPWM = 3, 44 | RT_USB_LDO = 4, 45 | RT_USB_BOOT_TYPE = 5 46 | } RT_USB_WVALUE; 47 | 48 | 49 | #if 0 50 | BOOLEAN usbvendorrequest(PCE_USB_DEVICE CEdevice, RT_USB_BREQUEST bRequest, RT_USB_WVALUE wValue, u8 wIndex, void *Data, u8 DataLength, BOOLEAN isDirectionIn); 51 | BOOLEAN CEusbGetStatusRequest(PCE_USB_DEVICE CEdevice, u16 Op, u16 Index, void *Data); 52 | BOOLEAN CEusbFeatureRequest(PCE_USB_DEVICE CEdevice, u16 Op, u16 FeatureSelector, u16 Index); 53 | BOOLEAN CEusbGetDescriptorRequest(PCE_USB_DEVICE CEdevice, short urbLength, u8 DescriptorType, u8 Index, u16 LanguageId, void *TransferBuffer, u32 TransferBufferLength); 54 | #endif 55 | 56 | #endif 57 | -------------------------------------------------------------------------------- /os_dep/linux/wifi_regd.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2009-2010 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | #ifndef __WIFI_REGD_H__ 17 | #define __WIFI_REGD_H__ 18 | 19 | void rtw_regd_apply_flags(struct wiphy *wiphy); 20 | #ifdef CONFIG_REGD_SRC_FROM_OS 21 | struct _RT_CHANNEL_INFO; 22 | u8 rtw_os_init_channel_set(_adapter *padapter, struct _RT_CHANNEL_INFO *channel_set); 23 | s16 rtw_os_get_total_txpwr_regd_lmt_mbm(_adapter *adapter, u8 cch, enum channel_width bw); 24 | #endif 25 | int rtw_regd_init(struct wiphy *wiphy); 26 | 27 | #endif /* __WIFI_REGD_H__ */ 28 | -------------------------------------------------------------------------------- /platform/custom_country_chplan.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | 16 | #error "You have defined CONFIG_CUSTOMIZED_COUNTRY_CHPLAN_MAP to use a customized map of your own instead of the default one" 17 | #error "Before removing these error notifications, please make sure regulatory certification requirements of your target markets" 18 | 19 | static const struct country_chplan CUSTOMIZED_country_chplan_map[] = { 20 | COUNTRY_CHPLAN_ENT("TW", 0x76, 1), /* Taiwan */ 21 | }; 22 | 23 | -------------------------------------------------------------------------------- /platform/platform_ARM_WMT_sdio.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #include 16 | #include 17 | #include 18 | 19 | extern void wmt_detect_sdio2(void); 20 | extern void force_remove_sdio2(void); 21 | 22 | int platform_wifi_power_on(void) 23 | { 24 | int err = 0; 25 | err = gpio_request(WMT_PIN_GP62_SUSGPIO1, "wifi_chip_en"); 26 | if (err < 0) { 27 | printk("request gpio for rtl8188eu failed!\n"); 28 | return err; 29 | } 30 | gpio_direction_output(WMT_PIN_GP62_SUSGPIO1, 0);/* pull sus_gpio1 to 0 to open vcc_wifi. */ 31 | printk("power on rtl8189.\n"); 32 | msleep(500); 33 | wmt_detect_sdio2(); 34 | printk("[rtl8189es] %s: new card, power on.\n", __FUNCTION__); 35 | return err; 36 | } 37 | 38 | void platform_wifi_power_off(void) 39 | { 40 | force_remove_sdio2(); 41 | 42 | gpio_direction_output(WMT_PIN_GP62_SUSGPIO1, 1);/* pull sus_gpio1 to 1 to close vcc_wifi. */ 43 | printk("power off rtl8189.\n"); 44 | gpio_free(WMT_PIN_GP62_SUSGPIO1); 45 | printk("[rtl8189es] %s: remove card, power off.\n", __FUNCTION__); 46 | } 47 | -------------------------------------------------------------------------------- /platform/platform_RTK_DMP_usb.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #include 16 | 17 | int platform_wifi_power_on(void) 18 | { 19 | int ret = 0; 20 | u32 tmp; 21 | tmp = readl((volatile unsigned int *)0xb801a608); 22 | tmp &= 0xffffff00; 23 | tmp |= 0x55; 24 | writel(tmp, (volatile unsigned int *)0xb801a608); /* write dummy register for 1055 */ 25 | return ret; 26 | } 27 | 28 | void platform_wifi_power_off(void) 29 | { 30 | } 31 | -------------------------------------------------------------------------------- /platform/platform_aml_s905_sdio.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2018 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #include /* pr_info(() */ 16 | #include /* msleep() */ 17 | #include "platform_aml_s905_sdio.h" /* sdio_reinit() and etc */ 18 | 19 | 20 | /* 21 | * Return: 22 | * 0: power on successfully 23 | * others: power on failed 24 | */ 25 | int platform_wifi_power_on(void) 26 | { 27 | int ret = 0; 28 | 29 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0)) 30 | ret = wifi_setup_dt(); 31 | if (ret) { 32 | pr_err("%s: setup dt failed!!(%d)\n", __func__, ret); 33 | return -1; 34 | } 35 | #endif /* kernel < 3.14.0 */ 36 | 37 | #if 0 /* Seems redundancy? Already done before insert driver */ 38 | pr_info("######%s:\n", __func__); 39 | extern_wifi_set_enable(0); 40 | msleep(500); 41 | extern_wifi_set_enable(1); 42 | msleep(500); 43 | sdio_reinit(); 44 | #endif 45 | 46 | return ret; 47 | } 48 | 49 | void platform_wifi_power_off(void) 50 | { 51 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0)) 52 | wifi_teardown_dt(); 53 | #endif /* kernel < 3.14.0 */ 54 | } 55 | -------------------------------------------------------------------------------- /platform/platform_aml_s905_sdio.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2018 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __PLATFORM_AML_S905_SDIO_H__ 16 | #define __PLATFORM_AML_S905_SDIO_H__ 17 | 18 | #include /* Linux vresion */ 19 | 20 | extern void sdio_reinit(void); 21 | extern void extern_wifi_set_enable(int is_on); 22 | 23 | #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0)) 24 | extern void wifi_teardown_dt(void); 25 | extern int wifi_setup_dt(void); 26 | #endif /* kernel < 3.14.0 */ 27 | 28 | #endif /* __PLATFORM_AML_S905_SDIO_H__ */ 29 | -------------------------------------------------------------------------------- /platform/platform_arm_act_sdio.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | /* 16 | * Description: 17 | * This file can be applied to following platforms: 18 | * CONFIG_PLATFORM_ACTIONS_ATM703X 19 | */ 20 | #include 21 | 22 | #ifdef CONFIG_PLATFORM_ACTIONS_ATM705X 23 | extern int acts_wifi_init(void); 24 | extern void acts_wifi_cleanup(void); 25 | #endif 26 | 27 | /* 28 | * Return: 29 | * 0: power on successfully 30 | * others: power on failed 31 | */ 32 | int platform_wifi_power_on(void) 33 | { 34 | int ret = 0; 35 | 36 | #ifdef CONFIG_PLATFORM_ACTIONS_ATM705X 37 | ret = acts_wifi_init(); 38 | if (unlikely(ret < 0)) { 39 | pr_err("%s Failed to register the power control driver.\n", __FUNCTION__); 40 | goto exit; 41 | } 42 | #endif 43 | 44 | exit: 45 | return ret; 46 | } 47 | 48 | void platform_wifi_power_off(void) 49 | { 50 | #ifdef CONFIG_PLATFORM_ACTIONS_ATM705X 51 | acts_wifi_cleanup(); 52 | #endif 53 | } 54 | -------------------------------------------------------------------------------- /platform/platform_hisilicon_hi3798_sdio.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2017 - 2018 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __PLATFORM_HISILICON_HI3798_SDIO_H__ 16 | #define __PLATFORM_HISILICON_HI3798_SDIO_H__ 17 | 18 | typedef unsigned int HI_U32; 19 | 20 | typedef int HI_S32; 21 | 22 | #define HI_SUCCESS 0 23 | #define HI_FAILURE (-1) 24 | 25 | extern HI_S32 HI_DRV_GPIO_SetDirBit(HI_U32 u32GpioNo, HI_U32 u32DirBit); 26 | extern HI_S32 HI_DRV_GPIO_WriteBit(HI_U32 u32GpioNo, HI_U32 u32BitValue); 27 | 28 | #endif /* __PLATFORM_HISILICON_HI3798_SDIO_H__ */ 29 | -------------------------------------------------------------------------------- /platform/platform_ops.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef CONFIG_PLATFORM_OPS 16 | /* 17 | * Return: 18 | * 0: power on successfully 19 | * others: power on failed 20 | */ 21 | int platform_wifi_power_on(void) 22 | { 23 | int ret = 0; 24 | 25 | 26 | return ret; 27 | } 28 | 29 | void platform_wifi_power_off(void) 30 | { 31 | } 32 | #endif /* !CONFIG_PLATFORM_OPS */ 33 | -------------------------------------------------------------------------------- /platform/platform_ops.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2013 - 2017 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __PLATFORM_OPS_H__ 16 | #define __PLATFORM_OPS_H__ 17 | 18 | /* 19 | * Return: 20 | * 0: power on successfully 21 | * others: power on failed 22 | */ 23 | int platform_wifi_power_on(void); 24 | void platform_wifi_power_off(void); 25 | 26 | #endif /* __PLATFORM_OPS_H__ */ 27 | -------------------------------------------------------------------------------- /platform/platform_zte_zx296716_sdio.c: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2018 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #include /* pr_info(() */ 16 | #include /* msleep() */ 17 | #include "platform_zte_zx296716_sdio.h" /* sdio_reinit() and etc */ 18 | 19 | 20 | /* 21 | * Return: 22 | * 0: power on successfully 23 | * others: power on failed 24 | */ 25 | int platform_wifi_power_on(void) 26 | { 27 | int ret = 0; 28 | 29 | pr_info("######%s: disable--1--\n", __func__); 30 | extern_wifi_set_enable(0); 31 | /*msleep(500);*/ /* add in function:extern_wifi_set_enable */ 32 | pr_info("######%s: enable--2---\n", __func__); 33 | extern_wifi_set_enable(1); 34 | /*msleep(500);*/ 35 | sdio_reinit(); 36 | 37 | return ret; 38 | } 39 | 40 | void platform_wifi_power_off(void) 41 | { 42 | int card_val; 43 | 44 | pr_info("######%s:\n", __func__); 45 | #ifdef CONFIG_A16T03_BOARD 46 | card_val = sdio_host_is_null(); 47 | if (card_val) 48 | remove_card(); 49 | #endif /* CONFIG_A16T03_BOARD */ 50 | extern_wifi_set_enable(0); 51 | 52 | /*msleep(500);*/ 53 | } 54 | -------------------------------------------------------------------------------- /platform/platform_zte_zx296716_sdio.h: -------------------------------------------------------------------------------- 1 | /****************************************************************************** 2 | * 3 | * Copyright(c) 2016 - 2018 Realtek Corporation. 4 | * 5 | * This program is free software; you can redistribute it and/or modify it 6 | * under the terms of version 2 of the GNU General Public License as 7 | * published by the Free Software Foundation. 8 | * 9 | * This program is distributed in the hope that it will be useful, but WITHOUT 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 | * more details. 13 | * 14 | *****************************************************************************/ 15 | #ifndef __PLATFORM_ZTE_ZX296716_SDIO_H__ 16 | #define __PLATFORM_ZTE_ZX296716_SDIO_H__ 17 | 18 | extern void sdio_reinit(void); 19 | extern void extern_wifi_set_enable(int val); 20 | #ifdef CONFIG_A16T03_BOARD 21 | extern int sdio_host_is_null(void); 22 | extern void remove_card(void); 23 | #endif /* CONFIG_A16T03_BOARD */ 24 | 25 | #endif /* __PLATFORM_ZTE_ZX296716_SDIO_H__ */ 26 | -------------------------------------------------------------------------------- /rtl8821c.mk: -------------------------------------------------------------------------------- 1 | ccflags-y += -DCONFIG_RTL8821C 2 | 3 | ifeq ($(CONFIG_USB_HCI), y) 4 | FILE_NAME = 8821cu 5 | endif 6 | ifeq ($(CONFIG_PCI_HCI), y) 7 | FILE_NAME = 8821ce 8 | endif 9 | ifeq ($(CONFIG_SDIO_HCI), y) 10 | FILE_NAME = 8821cs 11 | endif 12 | 13 | _HAL_INTFS_FILES += hal/rtl8821c/rtl8821c_halinit.o \ 14 | hal/rtl8821c/rtl8821c_mac.o \ 15 | hal/rtl8821c/rtl8821c_cmd.o \ 16 | hal/rtl8821c/rtl8821c_phy.o \ 17 | hal/rtl8821c/rtl8821c_dm.o \ 18 | hal/rtl8821c/rtl8821c_ops.o \ 19 | hal/rtl8821c/hal8821c_fw.o 20 | 21 | _HAL_INTFS_FILES += hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_halinit.o \ 22 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_halmac.o \ 23 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_io.o \ 24 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_xmit.o \ 25 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_recv.o \ 26 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_led.o \ 27 | hal/rtl8821c/$(HCI_NAME)/rtl$(FILE_NAME)_ops.o 28 | 29 | ifeq ($(CONFIG_SDIO_HCI), y) 30 | _HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821C_SDIO.o 31 | endif 32 | ifeq ($(CONFIG_USB_HCI), y) 33 | _HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821C_USB.o 34 | endif 35 | ifeq ($(CONFIG_PCI_HCI), y) 36 | _HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821C_PCIE.o 37 | endif 38 | 39 | include $(src)/halmac.mk 40 | 41 | _BTC_FILES += hal/btc/halbtc8821cwifionly.o 42 | ifeq ($(CONFIG_BT_COEXIST), y) 43 | _BTC_FILES += hal/btc/halbtc8821c1ant.o \ 44 | hal/btc/halbtc8821c2ant.o 45 | endif 46 | -------------------------------------------------------------------------------- /supported-device-IDs: -------------------------------------------------------------------------------- 1 | USB Vendor and Device ID List for rtl8811cu, rtl8821cu and rtl8731au chipset based USB WiFi Adapters 2 | 3 | To determine your Device ID: 4 | 5 | $ lsusb 6 | 7 | Example output: 8 | 9 | Bus 003 Device 011: ID 0bda:8811 Realtek Semiconductor Corp. 10 | 11 | ID VendorID:DeviceID = 0bda:8811 12 | 13 | We can search the list of driver supported IDs shown below. 14 | 15 | Realtek default IDs 16 | 17 | ID 0BDA:B82B 18 | ID 0BDA:b820 19 | ID 0BDA:C821 20 | ID 0BDA:C820 21 | ID 0BDA:C82A 22 | ID 0BDA:C82B 23 | ID 0BDA:C811 24 | ID 0BDA:8811 25 | ID 0BDA:2006 26 | ID 0BDA:8731 27 | ID 0BDA:C80C 28 | 29 | 30 | Seller specific IDs 31 | 32 | ID 2001:331d - D-Link 33 | ID 7392:c811 - Edimax 34 | ID 7392:d811 - Edimax 35 | 36 | If your adapter matches one of the default or seller specific 37 | IDs then this is the driver to use. 38 | 39 | Info: location of file that contains the IDs: /os_dep/linux/usb_intf.c 40 | 41 | If you are sure that your adapter contains a rtl8811cu, rtl8821cu or 42 | rtl8731au chipset and the ID is not shown above, please provide 43 | the follow information so that I can include your adapter in the 44 | driver source code so that the driver will work with your adapter: 45 | 46 | 1. VendorID:DeviceID 47 | 2. Link to device on internet 48 | --------------------------------------------------------------------------------