├── 38-IPCamera Module.pdf ├── 4K_Starlight_Camera_E.pdf ├── 4K_星光_相机_C.pdf ├── HI3516AV300_SOM datasheet _E.pdf ├── HI3516AV300_SOM datasheet_C.pdf ├── HI3516CV610-20S 4MP module Specification.pdf ├── HI3516DV300_SOM datasheet _E.pdf ├── HI3516DV300_SOM datasheet_C.pdf ├── HI3516DV500&HI3519DV500IPC module.pdf ├── HI3516D_HI3516A encoding module.pdf ├── HI3519AV100 core board.pdf ├── HI3519AV100 development board.pdf ├── HI3519V101 SOM PCBA Specification.pdf ├── HI3519V101 encoding module.pdf ├── HI3531DV200_SOM datasheet_C.pdf ├── HI3559AV100 core board.pdf ├── HI3559AV100 development board .pdf ├── HI3559V200_SOM datasheet _E.pdf ├── HI3559V200_SOM datasheet_C.pdf ├── HIVIEW_Product_C.pdf ├── HIVIEW_Product_E.pdf ├── HV-4ACAR-DVRspecification-V1.0(20240722)(1).pdf ├── HV-4ACAR-DVR规格书（中文版）-V1.0(20240722) .pdf ├── HV-LVDS-USB3.0 board.pdf ├── HV-LVDS-USB3.0-boardV2.pdf ├── HV3403_SOM_datasheet_VA01_C.pdf ├── Hi3516DV300_STPSOM_datasheet_C.pdf ├── Hi3516DV300_STPSOM_datasheet_E.pdf ├── Hi3516DV500_SOM__Specification_VA0_C.pdf ├── Hi3516DV500_SOM__Specification_VA0_E.pdf ├── Hi3519DV500_SOM__Specification_VA0_C.pdf ├── Hi3519DV500_SOM__Specification_VA0_E.pdf ├── README.md ├── hi3516dv300-encoder-en.md ├── hi3516dv300-encoder-zh.md ├── hi3516dv300-som-en.md ├── hi3516dv300-som-zh.md ├── hi3559v200-som-en.md └── hi3559v200-som-zh.md /38-IPCamera Module.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/38-IPCamera Module.pdf -------------------------------------------------------------------------------- /4K_Starlight_Camera_E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/4K_Starlight_Camera_E.pdf -------------------------------------------------------------------------------- /4K_星光_相机_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/4K_星光_相机_C.pdf -------------------------------------------------------------------------------- /HI3516AV300_SOM datasheet _E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516AV300_SOM datasheet _E.pdf -------------------------------------------------------------------------------- /HI3516AV300_SOM datasheet_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516AV300_SOM datasheet_C.pdf -------------------------------------------------------------------------------- /HI3516CV610-20S 4MP module Specification.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516CV610-20S 4MP module Specification.pdf -------------------------------------------------------------------------------- /HI3516DV300_SOM datasheet _E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516DV300_SOM datasheet _E.pdf -------------------------------------------------------------------------------- /HI3516DV300_SOM datasheet_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516DV300_SOM datasheet_C.pdf -------------------------------------------------------------------------------- /HI3516DV500&HI3519DV500IPC module.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516DV500&HI3519DV500IPC module.pdf -------------------------------------------------------------------------------- /HI3516D_HI3516A encoding module.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3516D_HI3516A encoding module.pdf -------------------------------------------------------------------------------- /HI3519AV100 core board.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3519AV100 core board.pdf -------------------------------------------------------------------------------- /HI3519AV100 development board.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3519AV100 development board.pdf -------------------------------------------------------------------------------- /HI3519V101 SOM PCBA Specification.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3519V101 SOM PCBA Specification.pdf -------------------------------------------------------------------------------- /HI3519V101 encoding module.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3519V101 encoding module.pdf -------------------------------------------------------------------------------- /HI3531DV200_SOM datasheet_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3531DV200_SOM datasheet_C.pdf -------------------------------------------------------------------------------- /HI3559AV100 core board.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3559AV100 core board.pdf -------------------------------------------------------------------------------- /HI3559AV100 development board .pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3559AV100 development board .pdf -------------------------------------------------------------------------------- /HI3559V200_SOM datasheet _E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3559V200_SOM datasheet _E.pdf -------------------------------------------------------------------------------- /HI3559V200_SOM datasheet_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HI3559V200_SOM datasheet_C.pdf -------------------------------------------------------------------------------- /HIVIEW_Product_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HIVIEW_Product_C.pdf -------------------------------------------------------------------------------- /HIVIEW_Product_E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HIVIEW_Product_E.pdf -------------------------------------------------------------------------------- /HV-4ACAR-DVRspecification-V1.0(20240722)(1).pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HV-4ACAR-DVRspecification-V1.0(20240722)(1).pdf -------------------------------------------------------------------------------- /HV-4ACAR-DVR规格书（中文版）-V1.0(20240722) .pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HV-4ACAR-DVR规格书（中文版）-V1.0(20240722) .pdf -------------------------------------------------------------------------------- /HV-LVDS-USB3.0 board.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HV-LVDS-USB3.0 board.pdf -------------------------------------------------------------------------------- /HV-LVDS-USB3.0-boardV2.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HV-LVDS-USB3.0-boardV2.pdf -------------------------------------------------------------------------------- /HV3403_SOM_datasheet_VA01_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/HV3403_SOM_datasheet_VA01_C.pdf -------------------------------------------------------------------------------- /Hi3516DV300_STPSOM_datasheet_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3516DV300_STPSOM_datasheet_C.pdf -------------------------------------------------------------------------------- /Hi3516DV300_STPSOM_datasheet_E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3516DV300_STPSOM_datasheet_E.pdf -------------------------------------------------------------------------------- /Hi3516DV500_SOM__Specification_VA0_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3516DV500_SOM__Specification_VA0_C.pdf -------------------------------------------------------------------------------- /Hi3516DV500_SOM__Specification_VA0_E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3516DV500_SOM__Specification_VA0_E.pdf -------------------------------------------------------------------------------- /Hi3519DV500_SOM__Specification_VA0_C.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3519DV500_SOM__Specification_VA0_C.pdf -------------------------------------------------------------------------------- /Hi3519DV500_SOM__Specification_VA0_E.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/openhisilicon/PRODUCT/ad53214146dfa6c9c8ba4ddceeef2aa70d7357c3/Hi3519DV500_SOM__Specification_VA0_E.pdf -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # SHENZHEN HIVIEW SCIENCE AND TECHNOLOGY CO., LTD. 2 | ## We provide hisilicon chip solutions with hardware customization and software services to support customers' rapid product development. 3 | ## Business cooperation, contact Email: thomas@hiview-tech.cn 4 | -------------------------------------------------------------------------------- /hi3516dv300-encoder-en.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3516DV300 encoder 3 | **Author: thomas@hiview-tech.cn** 4 | 5 | ## VIDEO IN 6 | 7 | * 1, HDMI1.4 1080P60FPS; 8 | * 2, HD-SDI-3G 1080P60FPS; 9 | * 3, SONY-LVDS 1080P60FPS; 10 | * 4, VIDEO 1080P60FPS + 480P60FPS; 11 | * 5, AUDIO AAC; 12 | 13 | ## Quick Use Guide 14 | 15 | #### serial console 16 | * J10 slot 17 | * Baud rate -115200 18 | * Data bit -8 19 | * Parity - none 20 | * Stop bit -1 21 | * Flow control - None 22 | 23 | #### Terminal of network 24 | * Default IP of the board: 192.168.0.2 25 | * telnet/ssh default username -root, password - hiview 26 | 27 | #### FAQ 28 | * **How do open audio on Webpage** 29 | * On the video preview page, enable Audio to highlight, and then click Play; 30 | 31 | * **How do switch video in** 32 | * RED-1 OFF:HDMI, ON:SDI; 33 | * SW2-2 OFF:HDMI/SDI, ON:SONY-LVDS; 34 | 35 | * **How do switch audio in** 36 | * RED-2 OFF:HDMI/SDI, ON:LINE-IN(RED-side); 37 | 38 | * **note** 39 | * RED: the RED switch on the video-in board; 40 | * SW2: the BLACK switch on the video-in board; 41 | * RED-side: the location near the RED switch; 42 | * For others, please refer to hi3516dv300-som-zh.md; 43 | 44 | 45 | * **Burn files** 46 | link：https://pan.baidu.com/s/1GqM2OvlGFG9rshOoWS-I7Q code：3ln1 47 | 48 | -------------------------------------------------------------------------------- /hi3516dv300-encoder-zh.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3516DV300视频编码板 3 | **作者: thomas@hiview-tech.cn** 4 | 5 | ## 视频输入与编码 6 | 7 | * 1, HDMI1.4 1080P60FPS; 8 | * 2, HD-SDI-3G 1080P60FPS; 9 | * 3, SONY-LVDS 1080P60FPS; 10 | * 4, 视频编码 1080P60FPS + 480P60FPS; 11 | * 5, 音频编码 AAC; 12 | 13 | ## 快速使用指南 14 | 15 | 16 | #### 串口终端 17 | * J10-座子 18 | * 波特率-115200 19 | * 数据位-8 20 | * 奇偶校验-无 21 | * 停止位-1 22 | * 流控-无 23 | 24 | #### 网口终端 25 | 26 | * 板子默认IP: 192.168.0.2 27 | * telnet/ssh默认用户名-root, 密码-hiview 28 | 29 | #### FAQ 30 | * **如何在WEB端打开音频** 31 | * 在视频预览页面, 使能audio高亮, 再点击Play; 32 | 33 | * **如何切换视频源** 34 | * RED-1 OFF:HDMI, ON:SDI; 35 | * SW2-2 OFF:HDMI/SDI, ON:SONY-LVDS; 36 | 37 | * **如何切换音频源** 38 | * RED-2 OFF:HDMI/SDI, ON:LINE-IN(RED-side); 39 | 40 | * **注释** 41 | * RED 表示接口板上的红色拨码开关; 42 | * SW2 表示接口板上的黑色拨码开关; 43 | * RED-side 表示靠近红色拨码开关位置; 44 | * 其他请参考 hi3516dv300-som-zh.md; 45 | 46 | 47 | * **烧录文件下载** 48 | 链接：https://pan.baidu.com/s/1GqM2OvlGFG9rshOoWS-I7Q 提取码：3ln1 49 | * **海思SDK下载** 50 | 链接：[`请联系我们获取下载方式`] 51 | -------------------------------------------------------------------------------- /hi3516dv300-som-en.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3516DV300-SOM-BaseBoard 3 | **Author: thomas@hiview-tech.cn** 4 | 5 | ## Hi3516DV300 6 | 7 | * 1, Dual-core ARM A7-900; 8 | * 2, 4M@30FPS venc/vdec; 9 | * 3, MIPI-CSI 4L/2Lx2 input; 10 | * 4, MIPI-DSI 4L/LCD/HDMI output; 11 | * 5, 1Tops Neural network acceleration engine; 12 | 13 | ## SOM 14 | 15 | * 1, DDR3 1GByte; 16 | * 2, SPI-NAND 512MByte; 17 | * 3, 180Pin Full function connector; 18 | 19 | ## BaseBoard 20 | 21 | * 1, DC12V, UART0, 100M-RJ45, USB2.0, SDCard, HDMI1.4; 22 | * 2, RTL8189FTV-WIFI, MIPI-CSI, MIPI-DSI; 23 | * 3, KEY,LED,GPIO,UART1,RS485,AUDIO-IN-OUT; 24 | 25 | 26 | ## SOM-BaseBord Specification 27 | https://github.com/openhisilicon/PRODUCT/blob/master/HI3516DV300_SOM%20datasheet%20_E.pdf 28 | 29 | 30 | ## Quick Use Guide 31 | 32 | 33 | #### serial console 34 | * J10 slot 35 | * Baud rate -115200 36 | * Data bit -8 37 | * Parity - none 38 | * Stop bit -1 39 | * Flow control - None 40 | 41 | #### Terminal of network 42 | * Default IP of the board: 192.168.0.2 43 | * Telnet/SSH username: root, password: hiview 44 | 45 | #### startup script 46 | 47 | * /etc/init.d/S99app 48 | Start /factory/startup.sh 49 | * /factory/startup.sh 50 | Initialize the network IP, unpack if there is an upgrade package file, and start /app/startapp.sh 51 | * /factory/cfg/bsp_def.json 52 | Save the default parameters that are not modified by the end user. The sensor type is configured in this file 53 | * /app/startapp.sh 54 | Initialize the environment variables, start the bsp.exe,codec.exe,svp.exe,... 55 | 56 | #### FAQ 57 | 58 | * **How do compile APP** (https://www.bilibili.com/video/BV1PP4y1P79i) 59 | * Download the source code: https://github.com/openhisilicon/HIVIEW 60 | * Set environment: source build/3516d 61 | * Compile: make 62 | * Make upgrade file: ./ins.sh 16d 63 | * Upload upgrade file: Use Google Chrome to open http://192.168.0.2 and Upload File at “Upload file using Ajax” 64 | 65 | * **How do use the left space in FLASH** 66 | * current uboot MTD partitions: uboot:1M, kernel: 4M, rootfs: 120M, user: 387M (not use) 67 | * To use a user partition, do the following: 68 | * 1 Format the UBI partition (do this only once): 69 | * ubiformat /dev/mtd3 70 | * ubiattach /dev/ubi_ctrl -m 3 71 | * ubinfo /dev/ubi1 72 | * ubimkvol /dev/ubi1 -N user -s xxxMiB 73 | (xxx from the ubinfo command output available space size, 74 | delete the volume if you type incorrectly: ubirmvol /dev/ubi1 -N user) 75 | * mount -t ubifs /dev/ubi1_0 /mnt/ 76 | * 2 mount UBI partition (mount is required every powered on): 77 | * ubiattach /dev/ubi_ctrl -m 3 78 | * mount -t ubifs /dev/ubi1_0 /mnt/ 79 | 80 | * **How do USB-BURN** 81 | * Please reference /ReleaseDoc/en/01.software/pc/HiTool/HiBurn User Guide.pdf [1.5 Environment Preparation] 82 | * Note: Switch update-key to GND when powering on. If WIN10 cannot find the device, please use WIN7 83 | 84 | * **WIN10 can not use USB burning problem** 85 | * In Win10, Hitool manually controls USB burning 86 | * (Keep update-key in "Update" mode, i.e. serial port upgrade mode) 87 | 88 | * 1, Open Hitool and select a CPU type; 89 | * 2, Configure Hitool, select serial port burning mode, only burn boot partition; 90 | * 3, Configure Hitool, select usb burning mode, and select other partitions except boot; 91 | * 4, Enter "usb device" in uboot; 92 | * 5, Click "Burn". When you see the following message from Hitool, reset the board, enter "usb device" again in uboot; 93 | `# ---- 100% ` 94 | `Boot download completed!` 95 | * 6, Wait for the completion of burning; 96 | 97 | * **How do ETH-BURN** 98 | * Please reference /ReleaseDoc/en/01.software/pc/HiTool/HiBurn User Guide.pdf 99 | * Note: Switch update-key to UPDATE when powering on. 100 | 101 | * **Burn files** 102 | link：https://pan.baidu.com/s/1GqM2OvlGFG9rshOoWS-I7Q code：3ln1 103 | 104 | 105 | -------------------------------------------------------------------------------- /hi3516dv300-som-zh.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3516DV300核心板与底板 3 | **作者: thomas@hiview-tech.cn** 4 | 5 | ## Hi3516DV300参数 6 | 7 | * 1, 双核A7-900; 8 | * 2, 4M@30FPS编码/解码; 9 | * 3, MIPI-CSI 4L/2Lx2输入; 10 | * 4, MIPI-DSI 4L/LCD/HDMI输出; 11 | * 5, 1Tops NNIE神经网络加速器; 12 | 13 | ## 核心板参数 14 | 15 | * 1, DDR3 1GByte; 16 | * 2, SPI-NAND 512MByte; 17 | * 3, 180Pin全功能连接器; 18 | 19 | ## 底板参数 20 | 21 | * 1, DC12V, UART0, 100M-RJ45, USB2.0, SDCard, HDMI1.4; 22 | * 2, RTL8189FTV-WIFI, MIPI-CSI, MIPI-DSI; 23 | * 3, KEY,LED,GPIO,UART1,RS485,AUDIO-IN-OUT; 24 | 25 | ## 核心板与底板规格书 26 | https://github.com/openhisilicon/PRODUCT/blob/master/HI3516DV300_SOM%20datasheet_C.pdf 27 | 28 | 29 | ## 快速使用指南 30 | 31 | 32 | #### 串口终端 33 | * J10-座子 34 | * 波特率-115200 35 | * 数据位-8 36 | * 奇偶校验-无 37 | * 停止位-1 38 | * 流控-无 39 | 40 | #### 网口终端 41 | 42 | * 板子默认IP: 192.168.0.2 43 | * Telnet/SSH用户名: root，密码: hiview 44 | 45 | #### 启动脚本 46 | 47 | * /etc/init.d/S99app 48 | 调用/factory/startup.sh 49 | * /factory/startup.sh 50 | 初始化网络IP,判断是否存在升级包文件需要加压,启动/app/startapp.sh 51 | * /factory/cfg/bsp_def.json 52 | 保存不被终端用户修改的默认参数, sensor类型在此文件配置 53 | * /app/startapp.sh 54 | 初始化环境变量,启动bsp.exe,codec.exe,svp.exe,... 55 | 56 | #### FAQ 57 | 58 | * **如何编译app程序** (https://www.bilibili.com/video/BV1rU4y1771Z) 59 | * 下载源代码 https://github.com/openhisilicon/HIVIEW 60 | * 设置编译环境 source build/3516d 61 | * 编译代码 make 62 | * 制作网络升级包 ./ins.sh 16d 63 | * 设备升级 使用Google Chrome 打开设备 http://192.168.0.2 在页面最下方 Upload file 64 | 65 | * **如何使用FLASH的剩余空间** 66 | * 当前MTD分区 uboot:1M,kernel:4M,rootfs:120M,user:387M(未使用) 67 | * 如果要使用user分区,请进行如下操作: 68 | * 1 格式化UBI分区(只需要执行一次此操作): 69 | * ubiformat /dev/mtd3 70 | * ubiattach /dev/ubi_ctrl -m 3 71 | * ubinfo /dev/ubi1 72 | * ubimkvol /dev/ubi1 -N user -s xxxMiB 73 | (xxx 来源于ubinfo命令输出可用的空间大小, 74 | 如果输入错误可删除卷: ubirmvol /dev/ubi1 -N user) 75 | * mount -t ubifs /dev/ubi1_0 /mnt/ 76 | * 2 挂载UBI分区(每次上电都需要执行挂载): 77 | * ubiattach /dev/ubi_ctrl -m 3 78 | * mount -t ubifs /dev/ubi1_0 /mnt/ 79 | 80 | * **如何使用USB烧写** 81 | * 请参考 /ReleaseDoc/zh/01.software/pc/HiTool/HiBurn 工具使用指南.pdf [1.5 环境准备] 82 | * 注: 上电前切换update-key为GND, 如果WIN10无法找到设备,请使用WIN7进行测试 83 | 84 | 85 | * **关于WIN10下无法使用USB烧录的问题** 86 | * win10下hitool手动控制usb烧录 87 | * (update-key保持在"update"即串口升级模式) 88 | 89 | * 1, 打开hitool, 选择CPU类型; 90 | * 2, 配置hitool, 选择串口烧录方式, 仅烧录boot分区; 91 | * 3, 配置hitool, 选择usb烧录方式, 选择除boot外的其他分区; 92 | * 4, 进入uboot输入 "usb device" 93 | * 5, 点击 "烧写", 当看到hitool提示如下时, 复位板子,再次在uboot输入 "usb device"; 94 | `# ---- 100% ` 95 | `Boot download completed!` 96 | * 6, 等待烧录完成; 97 | 98 | 99 | * **如何使用ETH烧写** 100 | * 请参考 /ReleaseDoc/zh/01.software/pc/HiTool/HiBurn 工具使用指南.pdf 101 | * 注: 上电前切换update-key为UPDATE. 102 | 103 | * **烧录文件下载** 104 | 链接：https://pan.baidu.com/s/1GqM2OvlGFG9rshOoWS-I7Q 提取码：3ln1 105 | 106 | -------------------------------------------------------------------------------- /hi3559v200-som-en.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3559V200-SOM-BaseBoard 3 | **Author: thomas@hiview-tech.cn** 4 | 5 | ## Hi3559V200 6 | 7 | * 1, Dual-core ARM A7-900; 8 | * 2, 4K@30FPS venc/vdec; 9 | * 3, MIPI-CSI 4L/2Lx2 input; 10 | * 4, MIPI-DSI 4L/LCD/HDMI output; 11 | * 5, 0.4Tops Neural network acceleration engine; 12 | 13 | ## SOM 14 | 15 | * 1, DDR3 1GByte; 16 | * 2, SPI-NAND 512MByte; 17 | * 3, 180Pin Full function connector; 18 | 19 | ## BaseBoard 20 | 21 | * 1, DC12V, UART0, USB2.0, SDCard, HDMI1.4; 22 | * 2, RTL8189FTV-WIFI, MIPI-CSI, MIPI-DSI; 23 | * 3, KEY,LED,GPIO,UART1,RS485,AUDIO-IN-OUT; 24 | 25 | ## SOM-BaseBord Specification 26 | https://github.com/openhisilicon/PRODUCT/blob/master/HI3559V200_SOM%20datasheet%20_E.pdf 27 | 28 | 29 | ## Quick Use Guide 30 | 31 | 32 | #### serial console 33 | * J10 slot 34 | * Baud rate -115200 35 | * Data bit -8 36 | * Parity - none 37 | * Stop bit -1 38 | * Flow control - None 39 | 40 | #### Terminal of network 41 | * Default IP of the board: 192.168.0.2 42 | * Telnet/SSH username: root, password: hiview 43 | 44 | #### startup script 45 | 46 | * /etc/init.d/S99app 47 | Start /factory/startup.sh 48 | * /factory/startup.sh 49 | Initialize the network IP, unpack if there is an upgrade package file, and start /app/startapp.sh 50 | * /factory/cfg/bsp_def.json 51 | Save the default parameters that are not modified by the end user. The sensor type is configured in this file 52 | * /app/startapp.sh 53 | Initialize the environment variables, start the bsp.exe,codec.exe,svp.exe,... 54 | 55 | #### FAQ 56 | 57 | * **How do compile APP** (https://www.bilibili.com/video/BV1PP4y1P79i) 58 | * Download the source code: https://github.com/openhisilicon/HIVIEW 59 | * Set environment: source build/3559 60 | * Compile: make 61 | * Make upgrade file: ./ins.sh 59 62 | * Upload upgrade file: Use Google Chrome to open http://192.168.0.2 and Upload File at “Upload file using Ajax” 63 | 64 | * **How do use the left space in FLASH** 65 | * current uboot MTD partitions: uboot:1M, kernel: 4M, rootfs: 120M, user: 387M (not use) 66 | * To use a user partition, do the following: 67 | * 1 Format the UBI partition (do this only once): 68 | * ubiformat /dev/mtd3 69 | * ubiattach /dev/ubi_ctrl -m 3 70 | * ubinfo /dev/ubi1 71 | * ubimkvol /dev/ubi1 -N user -s xxxMiB 72 | (xxx from the ubinfo command output available space size, 73 | delete the volume if you type incorrectly: ubirmvol /dev/ubi1 -N user) 74 | * mount -t ubifs /dev/ubi1_0 /mnt/ 75 | * 2 mount UBI partition (mount is required every powered on): 76 | * ubiattach /dev/ubi_ctrl -m 3 77 | * mount -t ubifs /dev/ubi1_0 /mnt/ 78 | 79 | * **How do open USB-NET** 80 | * Hi3559V200 no ETH-PHY interface. you can be used the USB-gadget virtual network port or the USB2ETH network port converter. 81 | 82 | * Use USB-Host mode and purchase a USB2ETH connector 83 | * download uImage-uhost file [`Please contact us for download`] 84 | * You can download uimage-Uhost to the board through the HiTool burn tool or burn it as follows: 85 | * flash_erase /dev/mtd1 0 0 86 | * nandwrite -p /dev/mtd1 uImage-uhost 87 | 88 | * Use USB-Device mode to enable the USB-gadget virtual network port operation as follows: 89 | * Please refer to installing the USBRNDIS drivers on the Windows: `/ReleaseDoc/en/01.software/board/OSDRV/Peripheral Driver Operation Guide.doc [1.2.3.6 Using the Composite Device Function of the USB Device Under Kernel]` 90 | * Execute on the device side: 91 | * mv /app/startapp.sh /app/startapp.sh.bak 92 | * reboot 93 | * /app/usbgadget/usb.sh 94 | * /app/startapp.sh.bak 95 | 96 | * **How do USB-BURN** 97 | * Please reference /ReleaseDoc/en/01.software/pc/HiTool/HiBurn User Guide.pdf [1.5 Environment Preparation] 98 | * Note: Switch update-key to GND when powering on. If WIN10 cannot find the device, please use WIN7 99 | 100 | * **WIN10 can not use USB burning problem** 101 | * In Win10, Hitool manually controls USB burning 102 | * (Keep update-key in "Update" mode, i.e. serial port upgrade mode) 103 | 104 | * 1, Open Hitool and select a CPU type; 105 | * 2, Configure Hitool, select serial port burning mode, only burn boot partition; 106 | * 3, Configure Hitool, select usb burning mode, and select other partitions except boot; 107 | * 4, Enter "usb device" in uboot; 108 | * 5, Click "Burn". When you see the following message from Hitool, reset the board, enter "usb device" again in uboot; 109 | `# ---- 100% ` 110 | `Boot download completed!` 111 | * 6, Wait for the completion of burning; 112 | 113 | 114 | * **Burn files** 115 | link：https://pan.baidu.com/s/1k525rZtWp54Xfu4Ie1C1rA code：drf7 116 | 117 | -------------------------------------------------------------------------------- /hi3559v200-som-zh.md: -------------------------------------------------------------------------------- 1 | 2 | # Hi3559V200核心板与底板 3 | **作者: thomas@hiview-tech.cn** 4 | 5 | ## Hi3559V200参数 6 | 7 | * 1, 双核A7-900; 8 | * 2, 4K@30FPS编码/解码; 9 | * 3, MIPI-CSI 4L/2Lx2输入; 10 | * 4, MIPI-DSI 4L/LCD/HDMI输出; 11 | * 5, 0.4Tops NNIE神经网络加速器; 12 | 13 | ## 核心板参数 14 | 15 | * 1, DDR3 1GByte; 16 | * 2, SPI-NAND 512MByte; 17 | * 3, 180Pin全功能连接器; 18 | 19 | ## 底板参数 20 | 21 | * 1, DC12V, UART0, USB2.0, SDCard, HDMI1.4; 22 | * 2, RTL8189FTV-WIFI, MIPI-CSI, MIPI-DSI; 23 | * 3, KEY,LED,GPIO,UART1,RS485,AUDIO-IN-OUT; 24 | 25 | ## 核心板与底板规格书 26 | https://github.com/openhisilicon/PRODUCT/blob/master/HI3559V200_SOM%20datasheet_C.pdf 27 | 28 | ## 快速使用指南 29 | 30 | #### 串口终端 31 | * J10-座子 32 | * 波特率-115200 33 | * 数据位-8 34 | * 奇偶校验-无 35 | * 停止位-1 36 | * 流控-无 37 | 38 | #### 网口终端 39 | 40 | * 板子默认IP: 192.168.0.2 41 | * Telnet/SSH用户名: root，密码: hiview 42 | 43 | #### 启动脚本 44 | 45 | * /etc/init.d/S99app 46 | 调用/factory/startup.sh 47 | * /factory/startup.sh 48 | 初始化网络IP,判断是否存在升级包文件需要加压,启动/app/startapp.sh 49 | * /factory/cfg/bsp_def.json 50 | 保存不被终端用户修改的默认参数, sensor类型在此文件配置 51 | * /app/startapp.sh 52 | 初始化环境变量,启动bsp.exe,codec.exe,svp.exe,... 53 | 54 | #### FAQ 55 | 56 | * **如何编译app程序** (https://www.bilibili.com/video/BV1rU4y1771Z) 57 | * 下载源代码 https://github.com/openhisilicon/HIVIEW 58 | * 设置编译环境 source build/3559 59 | * 编译代码 make 60 | * 制作网络升级包 ./ins.sh 59 61 | * 设备升级 使用Google Chrome 打开设备 http://192.168.0.2 在页面最下方 Upload file 62 | 63 | * **如何使用FLASH的剩余空间** 64 | * 当前MTD分区 uboot:1M,kernel:4M,rootfs:120M,user:387M(未使用) 65 | * 如果要使用user分区,请进行如下操作: 66 | * 1 格式化UBI分区(只需要执行一次此操作): 67 | * ubiformat /dev/mtd3 68 | * ubiattach /dev/ubi_ctrl -m 3 69 | * ubinfo /dev/ubi1 70 | * ubimkvol /dev/ubi1 -N user -s xxxMiB 71 | (xxx 来源于ubinfo命令输出可用的空间大小, 72 | 如果输入错误可删除卷: ubirmvol /dev/ubi1 -N user) 73 | * mount -t ubifs /dev/ubi1_0 /mnt/ 74 | * 2 挂载UBI分区(每次上电都需要执行挂载): 75 | * ubiattach /dev/ubi_ctrl -m 3 76 | * mount -t ubifs /dev/ubi1_0 /mnt/ 77 | 78 | * **如何测试USB网口** 79 | * Hi3559V200无ETH-PHY接口, 可通过usb-gadget虚拟网口或使用usb2eth网口转换器 80 | 81 | * 使用usb-host模式,购买usb2eth连接器 82 | * 下载 uImage-uhost 镜像文件 [`请联系我们获取下载方式`] 83 | * 可通过HiTool烧录工具下载uImage-uhost到板端或通过如下方式烧录: 84 | * flash_erase /dev/mtd1 0 0 85 | * nandwrite -p /dev/mtd1 uImage-uhost 86 | 87 | * 使用usb-device模式开启usb-gadget虚拟网口操作如下: 88 | * 在windows操作系统下安装usbrndis相关驱动,请参考:`ReleaseDoc/zh/01.software/board/OSDRV/外围设备驱动 操作指南.doc[1.2.3.6 内核下USB Device复合设备操作示例]` 89 | * 在板端执行: 90 | * mv /app/startapp.sh /app/startapp.sh.bak 91 | * reboot 92 | * /app/usbgadget/usb.sh 93 | * /app/startapp.sh.bak 94 | 95 | * **如何使用USB烧写** 96 | * 请参考 /ReleaseDoc/zh/01.software/pc/HiTool/HiBurn 工具使用指南.pdf [1.5 环境准备] 97 | * 注: 上电前切换update-key为GND, 如果WIN10无法找到设备,请使用WIN7进行测试 98 | 99 | * **关于WIN10下无法使用USB烧录的问题** 100 | * win10下hitool手动控制usb烧录 101 | * (update-key保持在"update"即串口升级模式) 102 | 103 | * 1, 打开hitool, 选择CPU类型; 104 | * 2, 配置hitool, 选择串口烧录方式, 仅烧录boot分区; 105 | * 3, 配置hitool, 选择usb烧录方式, 选择除boot外的其他分区; 106 | * 4, 进入uboot输入 "usb device" 107 | * 5, 点击 "烧写", 当看到hitool提示如下时, 复位板子,再次在uboot输入 "usb device"; 108 | `# ---- 100% ` 109 | `Boot download completed!` 110 | * 6, 等待烧录完成; 111 | 112 | * **烧录文件下载** 113 | 链接：https://pan.baidu.com/s/1k525rZtWp54Xfu4Ie1C1rA 提取码：drf7 114 | 115 | 116 | --------------------------------------------------------------------------------