├── .gitignore ├── AIRSPEEDv1 ├── PX4AIRSPEEDv1.1.brd └── PX4AIRSPEEDv1.1.sch ├── A_PX4_PARTS_DATABASE.csv ├── FLOWv1 ├── PX4FLOW1.3.1.brd └── PX4FLOW1.3.1.sch ├── FMUv1 ├── PX4FMUv1.6.brd ├── PX4FMUv1.6.sch ├── PX4FMUv1.7.1.brd ├── PX4FMUv1.7.1.sch ├── PX4FMUv1.7.brd ├── PX4FMUv1.7.sch └── README.md ├── FMUv2 ├── PX4FMUv2.3.brd ├── PX4FMUv2.3.sch ├── PX4FMUv2.4.3.brd ├── PX4FMUv2.4.3.sch ├── PX4FMUv2.4.5.brd ├── PX4FMUv2.4.5.pdf ├── PX4FMUv2.4.5.sch ├── PX4FMUv2.4.6.brd ├── PX4FMUv2.4.6.sch ├── PX4FMUv2.4.brd ├── PX4FMUv2.4.sch └── README.md ├── FMUv3_REV_D ├── 80PIN_FMU3_REV_C.SchDoc ├── BOM │ └── Bill of Materials-FMU3_REV_D(FMU3_REV_D).xlsx ├── CHANGE_FMU3_REV_C.SchDoc ├── CHANGE_FMU3_REV_D.SchDoc ├── FMU.OutJob ├── FMU3_REV_D.PcbDoc ├── FMU3_REV_D.PcbLib ├── FMU3_REV_D.PrjPcb ├── FMU3_REV_D.PrjPcbStructure ├── FMU3_REV_D.SCHLIB ├── FMU_FMU3_REV_C.SchDoc ├── FMU_Power_FMU3_REV_C.SchDoc ├── History │ ├── FMU3_REV_D.~(1).PcbDoc.Zip │ ├── FMU3_REV_D.~(1).PrjPcb.Zip │ └── FMU3_REV_D.~(2).PcbDoc.Zip ├── IO_FMU3_REV_C.SchDoc ├── IO_PWR_FMU3_REV_C.SchDoc ├── LEDs_FMU3_REV_C.SchDoc ├── PCB 3D Print │ ├── PCB 3D Print from Above.PDF │ └── PCB 3D Print from below.PDF ├── PCB Print │ └── Assembly.PDF ├── PWM_PPM_FMU3_REV_C.SchDoc ├── README.md ├── Report Board Stack │ └── Report Board Stack.PDF ├── SD_USB_FMU3_REV_C.SchDoc ├── SENSORS_FMU3_REV_C.SchDoc ├── SERIAL_FMU3_REV_C.SchDoc ├── Schematic Print │ └── Schematic Prints.PDF └── __Previews │ ├── 80PIN_FMU3_REV_C.SchDocPreview │ ├── CHANGE_FMU3_REV_D.SchDocPreview │ ├── FMU3_REV_D.PcbDocPreview │ ├── FMU_FMU3_REV_C.SchDocPreview │ ├── FMU_Power_FMU3_REV_C.SchDocPreview │ ├── IO_FMU3_REV_C.SchDocPreview │ ├── IO_PWR_FMU3_REV_C.SchDocPreview │ ├── LEDs_FMU3_REV_C.SchDocPreview │ ├── PCA_0004_80PIN_FMU3_REV_C.SchDocPreview │ ├── PWM_PPM_FMU3_REV_C.SchDocPreview │ ├── SD_USB_FMU3_REV_C.SchDocPreview │ ├── SENSORS_FMU3_REV_C.SchDocPreview │ └── SERIAL_FMU3_REV_C.SchDocPreview ├── FMUv4 └── README.md ├── FMUv5 ├── FMUv5_stm32_pinout.md ├── Pixhawk4-Data-Sheet.pdf ├── Pixhawk4-Pinouts.pdf └── README.md ├── IMUv3_REV_C ├── History │ ├── IMU.~(1).OutJob.Zip │ ├── IMU_REV_C.~(1).PcbLib.Zip │ ├── IMU_REV_C.~(1).PrjPcb.Zip │ ├── IMU_REV_C.~(2).PrjPcb.Zip │ ├── IMU_REV_C.~(3).PrjPcb.Zip │ └── IMU_REV_C.~(4).PrjPcb.Zip ├── IMU.OutJob ├── IMU_REV_C.Dat ├── IMU_REV_C.PcbDoc ├── IMU_REV_C.PcbLib ├── IMU_REV_C.PrjPcb ├── IMU_REV_C.PrjPcbStructure ├── IMU_REV_C.SCHLIB ├── IMU_REV_C.SchDoc ├── PCB 3D Print │ ├── PCB 3D Print from Above.PDF │ └── PCB 3D Print from below.PDF ├── PCB Print │ └── Assembly.PDF ├── Project Outputs for IMU_REV_C │ └── IMU_REV_C.xlsx ├── Report Board Stack │ └── Report Board Stack.PDF ├── Schematic Print │ └── Schematic Prints.PDF └── __Previews │ ├── IMU_REV_C.PcbDocPreview │ └── IMU_REV_C.SchDocPreview ├── IOv1 ├── PX4IOARMTv1.0.brd ├── PX4IOARMTv1.0.sch ├── PX4IOARv1.2.brd ├── PX4IOARv1.2.sch ├── PX4IOv1.3.brd └── PX4IOv1.3.sch ├── Installing_Altium_Viewer.txt ├── MindPXv2 ├── IMU.pdf ├── MINDPX V2.8 SCH.pdf ├── MINDPX22.pdf ├── MINDRACER V12 SCH.pdf ├── MINDRACER-V12.DSN ├── MindPX V2.8 SCH.SchDoc ├── MindPX2.2.SchDoc ├── README.md └── imu.SchDoc ├── PRI_Breakout ├── FAB-830-00011 Microhard Module Breakout Board-1.0.0 │ ├── PCB Fab Documentation.PDF │ └── PCB and PCBA Files │ │ ├── Gerber │ │ ├── 830-00011 Microhard Module Breakout Board-macro.APR_LIB │ │ ├── 830-00011 Microhard Module Breakout Board.EXTREP │ │ ├── 830-00011 Microhard Module Breakout Board.GBL │ │ ├── 830-00011 Microhard Module Breakout Board.GBO │ │ ├── 830-00011 Microhard Module Breakout Board.GBS │ │ ├── 830-00011 Microhard Module Breakout Board.GM1 │ │ ├── 830-00011 Microhard Module Breakout Board.GM2 │ │ ├── 830-00011 Microhard Module Breakout Board.GP1 │ │ ├── 830-00011 Microhard Module Breakout Board.GP2 │ │ ├── 830-00011 Microhard Module Breakout Board.GTL │ │ ├── 830-00011 Microhard Module Breakout Board.GTO │ │ ├── 830-00011 Microhard Module Breakout Board.GTP │ │ ├── 830-00011 Microhard Module Breakout Board.GTS │ │ ├── 830-00011 Microhard Module Breakout Board.REP │ │ ├── 830-00011 Microhard Module Breakout Board.RUL │ │ └── 830-00011 Microhard Module Breakout Board.apr │ │ └── NC Drill │ │ ├── 830-00011 Microhard Module Breakout Board-RoundHoles.TXT │ │ ├── 830-00011 Microhard Module Breakout Board-SlotHoles.TXT │ │ ├── 830-00011 Microhard Module Breakout Board.DRR │ │ └── 830-00011 Microhard Module Breakout Board.LDP ├── PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0 │ ├── Assembly Documentation.PDF │ ├── BOM │ │ └── Bill of Materials-830-00011 Microhard Module Breakout Board.xlsx │ └── PCB and PCBA Files │ │ ├── Gerber │ │ ├── 830-00011 Microhard Module Breakout Board-macro.APR_LIB │ │ ├── 830-00011 Microhard Module Breakout Board.EXTREP │ │ ├── 830-00011 Microhard Module Breakout Board.GBL │ │ ├── 830-00011 Microhard Module Breakout Board.GBO │ │ ├── 830-00011 Microhard Module Breakout Board.GBS │ │ ├── 830-00011 Microhard Module Breakout Board.GM1 │ │ ├── 830-00011 Microhard Module Breakout Board.GM2 │ │ ├── 830-00011 Microhard Module Breakout Board.GP1 │ │ ├── 830-00011 Microhard Module Breakout Board.GP2 │ │ ├── 830-00011 Microhard Module Breakout Board.GTL │ │ ├── 830-00011 Microhard Module Breakout Board.GTO │ │ ├── 830-00011 Microhard Module Breakout Board.GTP │ │ ├── 830-00011 Microhard Module Breakout Board.GTS │ │ ├── 830-00011 Microhard Module Breakout Board.REP │ │ ├── 830-00011 Microhard Module Breakout Board.RUL │ │ └── 830-00011 Microhard Module Breakout Board.apr │ │ └── Pick Place │ │ └── Pick Place for 830-00011 Microhard Module Breakout Board.txt ├── README.md └── SRC-830-00011 Microhard Module Breakout Board-1.0.0 │ ├── .SpecialStrings │ ├── 830-00011 Microhard Module Breakout Board Assembly.OutJob │ ├── 830-00011 Microhard Module Breakout Board Assembly.PCBDwf │ ├── 830-00011 Microhard Module Breakout Board PCB Fab.OutJob │ ├── 830-00011 Microhard Module Breakout Board PCB Fab.PCBDwf │ ├── 830-00011 Microhard Module Breakout Board.BomDoc │ ├── 830-00011 Microhard Module Breakout Board.OutJob │ ├── 830-00011 Microhard Module Breakout Board.PcbDoc │ ├── 830-00011 Microhard Module Breakout Board.PrjPcb │ └── 830-00011 Microhard Module Breakout Board.SchDoc ├── PSMv3_REV_C ├── BOM │ └── Bill of Materials-PSM_REV_C(PCA_0007_PSM).xlsx ├── History │ ├── PCA_0007_PSM_REV_C.~(1).PrjPcb.Zip │ ├── PCA_0007_PSM_REV_C.~(2).PrjPcb.Zip │ ├── PSM.~(1).OutJob.Zip │ ├── PSM_REV_C.~(1).PcbDoc.Zip │ ├── PSM_REV_C.~(1).PcbLib.Zip │ ├── PSM_REV_C.~(1).PrjPcb.Zip │ └── PSM_REV_C.~(2).PrjPcb.Zip ├── PCA_0007_PSM_REV_C.PrjPcb ├── PCB 3D Print │ ├── PCB 3D Print from Above.PDF │ └── PCB 3D Print from below.PDF ├── PCB Print │ └── Assembly.PDF ├── PSM.OutJob ├── PSM_REV_C.Dat ├── PSM_REV_C.PcbDoc ├── PSM_REV_C.PcbLib ├── PSM_REV_C.PrjPcb ├── PSM_REV_C.PrjPcbStructure ├── PSM_REV_C.SCHLIB ├── PSM_components_REV_C.SchDoc ├── PSM_footprint_REV_C.SchDoc ├── Report Board Stack │ └── Report Board Stack.PDF ├── Schematic Print │ └── Schematic Prints.PDF ├── Status Report.Txt └── __Previews │ ├── PSM_REV_C.PcbDocPreview │ ├── PSM_components_REV_C.SchDocPreview │ └── PSM_footprint_REV_C.SchDocPreview ├── Pixhawk_debug_adapter ├── 01_cover_page.SchDoc ├── 02_main.SchDoc ├── Project Outputs │ ├── 3D Models │ │ ├── Status Report.Txt │ │ ├── pixhawk_debug_adapter_mini(Production).step │ │ └── pixhawk_debug_adapter_mini_3dBoard.PDF │ ├── BOM │ │ └── Bill of Materials-pixhawk_debug_adapter_mini(Production).xlsx │ ├── Gerber │ │ ├── pixhawk_debug_adapter_mini-macro.APR_LIB │ │ ├── pixhawk_debug_adapter_mini.EXTREP │ │ ├── pixhawk_debug_adapter_mini.GBL │ │ ├── pixhawk_debug_adapter_mini.GBO │ │ ├── pixhawk_debug_adapter_mini.GBP │ │ ├── pixhawk_debug_adapter_mini.GBS │ │ ├── pixhawk_debug_adapter_mini.GD1 │ │ ├── pixhawk_debug_adapter_mini.GG1 │ │ ├── pixhawk_debug_adapter_mini.GKO │ │ ├── pixhawk_debug_adapter_mini.GM1 │ │ ├── pixhawk_debug_adapter_mini.GM12 │ │ ├── pixhawk_debug_adapter_mini.GM2 │ │ ├── pixhawk_debug_adapter_mini.GM5 │ │ ├── pixhawk_debug_adapter_mini.GM8 │ │ ├── pixhawk_debug_adapter_mini.GPB │ │ ├── pixhawk_debug_adapter_mini.GPT │ │ ├── pixhawk_debug_adapter_mini.GTL │ │ ├── pixhawk_debug_adapter_mini.GTO │ │ ├── pixhawk_debug_adapter_mini.GTP │ │ ├── pixhawk_debug_adapter_mini.GTS │ │ ├── pixhawk_debug_adapter_mini.RUL │ │ └── pixhawk_debug_adapter_mini.apr │ ├── NC Drill │ │ ├── pixhawk_debug_adapter_mini.DRR │ │ ├── pixhawk_debug_adapter_mini.LDP │ │ └── pixhawk_debug_adapter_mini.TXT │ ├── ODB │ │ ├── odb │ │ │ ├── fonts │ │ │ │ └── standard │ │ │ ├── matrix │ │ │ │ └── matrix │ │ │ ├── misc │ │ │ │ └── attrlist │ │ │ └── steps │ │ │ │ └── pcb │ │ │ │ ├── attrlist │ │ │ │ ├── eda │ │ │ │ └── data │ │ │ │ ├── layers │ │ │ │ ├── bottom_3d_body │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── bottom_layer │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── bottom_overlay │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── bottom_paste │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── bottom_solder │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── branding_top_overlay │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── comp_+_top │ │ │ │ │ ├── components │ │ │ │ │ └── features │ │ │ │ ├── drill │ │ │ │ │ ├── attrlist │ │ │ │ │ ├── features │ │ │ │ │ └── tools │ │ │ │ ├── keep-out_layer │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_01_board_outline │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_4 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_5 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_6 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_7 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_8 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mechanical_9 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mid-layer_1 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── mid-layer_2 │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_3d_body │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_assembly │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_component_outline │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_courtyard │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_designator │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_layer │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_overlay │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── top_paste │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ └── top_solder │ │ │ │ │ ├── attrlist │ │ │ │ │ └── features │ │ │ │ ├── netlists │ │ │ │ └── cadnet │ │ │ │ │ └── netlist │ │ │ │ ├── profile │ │ │ │ └── stephdr │ │ ├── pixhawk_debug_adapter_mini.tgz │ │ └── pixhawk_debug_adapter_mini.zip │ ├── Pick Place │ │ └── Pick Place for pixhawk_debug_adapter_mini(Production).txt │ ├── pixhawk_debug_adapter_mini_Fab.PDF │ └── pixhawk_debug_adapter_mini_Schem.PDF ├── pixhawk_debug_adapter_mini.BomDoc ├── pixhawk_debug_adapter_mini.OutJob ├── pixhawk_debug_adapter_mini.PCBDwf ├── pixhawk_debug_adapter_mini.PcbDoc ├── pixhawk_debug_adapter_mini.PrjPcb └── pixhawk_debug_adapter_mini.PrjPcbVariants ├── README.md ├── pixhawk2.lbr └── sapog_reference_hardware ├── README.md ├── sapog_reference_hardware.brd ├── sapog_reference_hardware.lbr └── sapog_reference_hardware.sch /.gitignore: -------------------------------------------------------------------------------- 1 | *.s#* 2 | *.b#* 3 | *.l#* -------------------------------------------------------------------------------- /FMUv1/README.md: -------------------------------------------------------------------------------- 1 | # FMUv1 Pixhawk Open Hardware Design 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | This is the first Pixhawk FMU design, and was intended to be used with various piggyback boards, including an [IO](IOv1) board (the boards were combined into one package for the FMUv2 design). 6 | 7 | > **Warning** This design is end-of-life. 8 | 9 | ## Design Files 10 | 11 | The design is provided in [EAGLE](https://www.autodesk.com/products/eagle/overview) CAD files (can be viewed with the free version). 12 | 13 | It consists of schematic files (*.sch) and includes open reference hardware PCB layouts (.brd). 14 | BOM management is performed using [Bob Starr's BOM-EX plugin](http://www.bobstarr.net/pages/downloads.html). 15 | 16 | ## Feature Overview 17 | 18 | The PX4-FMU (Flight Management Unit). 19 | - Cortex M4F micro-controller and flash memory for controlling flight and communications. 20 | - SD memory card socket 21 | - 3 axis gyro for determining attitude/orientation. 22 | - 3 axis accelerometer. 23 | - Compass (magnetometer). 24 | - Barometric pressure sensor (altitude) 25 | - Connection for external UBLOX LEA GPS 26 | - Interconnections for adding stackable peripheral boards. 27 | - USB, JTAG and Serial interfaces/connections. 28 | - PPM-SUM RC radio inputs 29 | - Servo outputs. 30 | -------------------------------------------------------------------------------- /FMUv2/PX4FMUv2.4.5.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv2/PX4FMUv2.4.5.pdf -------------------------------------------------------------------------------- /FMUv2/README.md: -------------------------------------------------------------------------------- 1 | # FMUv2 Pixhawk Open Hardware Design 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | FMUv2 combines the FMUv1 and I/O designs into a single package. 6 | The open design provides both schematics and open reference layouts. 7 | 8 | 9 | ## Design Files 10 | 11 | The design is provided in [EAGLE](https://www.autodesk.com/products/eagle/overview) CAD files (can be viewed with the free version). 12 | 13 | It consists of schematic files (*.sch) and includes open reference hardware PCB layouts (.brd). 14 | BOM management is performed using [Bob Starr's BOM-EX plugin](http://www.bobstarr.net/pages/downloads.html). 15 | 16 | > **Tip** A PDF version of the schematics and PCB layouts has been made available for easy previewing: [PX4FMUv2.4.5.pdf](PX4FMUv2.4.5.pdf). 17 | -------------------------------------------------------------------------------- /FMUv3_REV_D/80PIN_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/80PIN_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/BOM/Bill of Materials-FMU3_REV_D(FMU3_REV_D).xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/BOM/Bill of Materials-FMU3_REV_D(FMU3_REV_D).xlsx -------------------------------------------------------------------------------- /FMUv3_REV_D/CHANGE_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/CHANGE_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/CHANGE_FMU3_REV_D.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/CHANGE_FMU3_REV_D.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU3_REV_D.PcbDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/FMU3_REV_D.PcbDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU3_REV_D.PcbLib: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/FMU3_REV_D.PcbLib -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU3_REV_D.PrjPcbStructure: -------------------------------------------------------------------------------- 1 | Record=TopLevelDocument|FileName=80PIN_FMU3_REV_C.SchDoc 2 | -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU3_REV_D.SCHLIB: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/FMU3_REV_D.SCHLIB -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/FMU_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/FMU_Power_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/FMU_Power_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/History/FMU3_REV_D.~(1).PcbDoc.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/History/FMU3_REV_D.~(1).PcbDoc.Zip -------------------------------------------------------------------------------- /FMUv3_REV_D/History/FMU3_REV_D.~(1).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/History/FMU3_REV_D.~(1).PrjPcb.Zip -------------------------------------------------------------------------------- /FMUv3_REV_D/History/FMU3_REV_D.~(2).PcbDoc.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/History/FMU3_REV_D.~(2).PcbDoc.Zip -------------------------------------------------------------------------------- /FMUv3_REV_D/IO_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/IO_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/IO_PWR_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/IO_PWR_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/LEDs_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/LEDs_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/PCB 3D Print/PCB 3D Print from Above.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/PCB 3D Print/PCB 3D Print from Above.PDF -------------------------------------------------------------------------------- /FMUv3_REV_D/PCB 3D Print/PCB 3D Print from below.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/PCB 3D Print/PCB 3D Print from below.PDF -------------------------------------------------------------------------------- /FMUv3_REV_D/PCB Print/Assembly.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/PCB Print/Assembly.PDF -------------------------------------------------------------------------------- /FMUv3_REV_D/PWM_PPM_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/PWM_PPM_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/README.md: -------------------------------------------------------------------------------- 1 | # FMUv3 Pixhawk Open Hardware Design 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | FMUv3 was introduced in 2015. Identical to FMUv2, it doubled the usable flash to 2MB. 6 | 7 | The FMUv3 design is used in the Pixhawk 2 FC board. 8 | This hardware is the result of a collaboration of the open hardware development community and 3D Robotics. 9 | 10 | 11 | ## Design Files 12 | 13 | The design is provided in [Altium Designer](https://www.altium.com/) CAD files. 14 | 15 | It consists of schematic files (*.SchDoc), BOM listings, and includes open reference hardware PCB layouts (.PrjPcb). 16 | 17 | > **Tip** PDF versions of the schematics and PCB layouts has been made available for easy previewing (i.e. if you don't have Altium Designer). 18 | 19 | 20 | 21 | 22 | 23 | -------------------------------------------------------------------------------- /FMUv3_REV_D/Report Board Stack/Report Board Stack.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/Report Board Stack/Report Board Stack.PDF -------------------------------------------------------------------------------- /FMUv3_REV_D/SD_USB_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/SD_USB_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/SENSORS_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/SENSORS_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/SERIAL_FMU3_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/SERIAL_FMU3_REV_C.SchDoc -------------------------------------------------------------------------------- /FMUv3_REV_D/Schematic Print/Schematic Prints.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv3_REV_D/Schematic Print/Schematic Prints.PDF -------------------------------------------------------------------------------- /FMUv4/README.md: -------------------------------------------------------------------------------- 1 | # FMUv4 Pixhawk Open Hardware Design 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | The open hardware design of Pixracer (based on FMUv4) is provided [here](https://github.com/AUAV-OpenSource/FMUv4-PixRacer). 6 | 7 | ## Design Files 8 | 9 | The design is provided in [Altium Designer](https://www.altium.com/) CAD files. 10 | 11 | It consists of schematic files (*.SchDoc), BOM listings, and includes open reference hardware PCB layouts (.PrjPcb). 12 | 13 | > **Tip** PDF versions of the schematics and PCB layouts has been made available for easy previewing (i.e. if you don't have Altium Designer). 14 | 15 | 16 | 17 | 18 | -------------------------------------------------------------------------------- /FMUv5/FMUv5_stm32_pinout.md: -------------------------------------------------------------------------------- 1 | The reference design (FMUv5) pinout is available [here](https://docs.google.com/spreadsheets/d/1-n0__BYDedQrc_2NHqBenG1DNepAgnHpSGglke-QQwY/edit#gid=912976165). 2 | -------------------------------------------------------------------------------- /FMUv5/Pixhawk4-Data-Sheet.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv5/Pixhawk4-Data-Sheet.pdf -------------------------------------------------------------------------------- /FMUv5/Pixhawk4-Pinouts.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/FMUv5/Pixhawk4-Pinouts.pdf -------------------------------------------------------------------------------- /FMUv5/README.md: -------------------------------------------------------------------------------- 1 | # FMUv5 Pixhawk Open Hardware Design 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | FMUv5 was released in 2018. When compared to previous versions it has a new processor, 2xRAM, new sensors with higher temperature stability, and is much more configurable. 6 | More information can be found in the [Pixhawk4 Data Sheet](Pixhawk4-Data-Sheet.pdf). 7 | 8 | ## Design Files 9 | 10 | The FMUv5 reference design pinout is available [on Google docs here](https://docs.google.com/spreadsheets/d/1-n0__BYDedQrc_2NHqBenG1DNepAgnHpSGglke-QQwY/edit#gid=912976165) (linked from [FMUv5_stm32_pinout.md](FMUv5_stm32_pinout.md)). 11 | This includes everything needed to create compatible hardware. 12 | 13 | Note 14 | - Schematics are not provided. 15 | - Open reference hardware designs are not provided (Pixhawk 4 is a *proprietary* hardware layout based on this design). 16 | 17 | ## Other Files 18 | 19 | This design additionally contains Pixhawk 4 information that may be useful if creating compatible products: 20 | - [Pixhawk4 Pinouts](Pixhawk4-Pinouts.pdf) 21 | - [Pixhawk4 Data Sheet](Pixhawk4-Data-Sheet.pdf) 22 | -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU.~(1).OutJob.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU.~(1).OutJob.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU_REV_C.~(1).PcbLib.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU_REV_C.~(1).PcbLib.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU_REV_C.~(1).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU_REV_C.~(1).PrjPcb.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU_REV_C.~(2).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU_REV_C.~(2).PrjPcb.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU_REV_C.~(3).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU_REV_C.~(3).PrjPcb.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/History/IMU_REV_C.~(4).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/History/IMU_REV_C.~(4).PrjPcb.Zip -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.Dat: -------------------------------------------------------------------------------- 1 | Field=Comment~String~Comment~100|Field=PARTNO~String~PARTNO~100|Field=Description~String~Description~100|Field=Designator~String~Designator~100|Field=Footprint~String~Footprint~100|Field=LibRef~String~LibRef~100|Field=Quantity~Integer~Quantity~100|Field=Manufacturer 1~String~Manufacturer 1~100|Field=Manufacturer Part Number 1~String~Manufacturer Part Number 1~100|Field=Supplier 1~String~Supplier 1~100|Field=Supplier Currency 1~String~Supplier Currency 1~100|Field=Supplier Order Qty 1~Integer~Supplier Order Qty 1~100|Field=Supplier Part Number 1~String~Supplier Part Number 1~100|Field=Supplier Stock 1~Integer~Supplier Stock 1~100|Field=Supplier Subtotal 1~Float~Supplier Subtotal 1~100|Field=Supplier Unit Price 1~Float~Supplier Unit Price 1~100|Field=3DR_PARTNO~String~3DR_PARTNO~100|Field=Value~String~Value~100|ReportField=Currency~USD|ReportField=ProductionQuantity~5000|ReportField=ProjectFileName~IMU_REV_C.PrjPcb|ReportField=ProjectFullPath~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\IMUv3_REV_C\IMU_REV_C.PrjPcb|ReportField=Title~Bill of Materials For Variant [PCA_0003_IMU_REV_C] of Project [IMU_REV_C.PrjPcb] (No PCB Document Selected)|ReportField=TotalQuantity~24|ReportField=ReportTime~12:38:21 PM|ReportField=ReportDate~4/06/2015|ReportField=ReportDateTime~4/06/2015 12:38:21 PM|ReportField=OutputName~Bill of Materials|ReportField=OutputType~BOM_PartType|ReportField=GeneratorName~BOM|ReportField=GeneratorDescription~Bill of Materials|ReportField=VariantName~PCA_0003_IMU_REV_C|ReportField=Address1~|ReportField=Address2~|ReportField=Address3~|ReportField=Address4~|ReportField=Application_BuildNumber~|ReportField=ApprovedBy~|ReportField=Author~|ReportField=CheckedBy~|ReportField=CompanyName~|ReportField=CurrentDate~4/06/2015|ReportField=CurrentTime~12:37:51 PM|ReportField=Date~|ReportField=DocumentFullPathAndName~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\IMUv3_REV_C\IMU_REV_C.SchDoc|ReportField=DocumentName~IMU_REV_C.SchDoc|ReportField=DocumentNumber~|ReportField=DrawnBy~Philip Rowse|ReportField=Engineer~|ReportField=ImagePath~|ReportField=ModifiedDate~4/06/2015|ReportField=Organization~|ReportField=ProjectName~IMU_REV_C.PrjPcb|ReportField=Revision~|ReportField=Rule~|ReportField=SheetNumber~|ReportField=SheetTotal~|ReportField=Time~|ReportField=Title~|ReportField=DataSourceFileName~IMU_REV_C.PrjPcb|ReportField=DataSourceFullPath~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\IMUv3_REV_C\IMU_REV_C.PrjPcb 2 | 10u|CC0805ZKY5V6BB106|Capacitor, 10uF, 10V, Y5V, 0805, Ceramic|C1, C4, C6, C13|0805-CAP|CAPACITOR-0805|4|Yageo|CC0805ZKY5V6BB106|Digi-Key|USD|20000|311-1355-1-ND|360353|680.33158|0.03402|ECM0713|10u 3 | 0u1|CC0402ZRY5V7BB104|Capacitor, 0.1uF, 16V, Y5V, 0402, Ceramic|C2, C5, C10, C12, C14|0402-CAP|CAPACITOR-0402|5|Yageo|CC0402ZRY5V7BB104|Digi-Key|USD|25000|311-1047-1-ND|2704025|70.34964|0.00281|ECM0700|0u1 4 | 0u01|CC0402KRX7R7BB103|Capacitor, 10000pF, 16V, 10%, X7R, 0402, Ceramic|C3|0402-CAP|CAPACITOR-0402|1|Yageo|CC0402KRX7R7BB103|Digi-Key|USD|5000|311-1042-1-ND|2199337|14.49747|0.0029|ECM0711|10000pF 5 | 0u47|C1005X5R1C474K050BC|Capacitor, 0.47uF, 16V, 10%, X5R, 0402, Ceramic|C7|0402-CAP|CAPACITOR-0402|1|TDK Corporation|C1005X5R1C474K050BC|Digi-Key|USD|5000|445-4976-1-ND|847187|102.72603|0.02055|ECM0704|0u47 6 | 2u2|C1608X6S1C225K080AC|Capacitor, 2.2uF, 16V, 10%, X6S, 0603, Ceramic|C8, C9|0603-CAP|CAPACITOR-0603|2|TDK Corporation|C1608X6S1C225K080AC|Digi-Key|USD|10000|445-7438-1-ND|33858|648.84914|0.06488|ECM0619|2u2 7 | 0u01|06033C103JAT2A|Capacitor, 10000pF, 25V, 5%, X7R, 0603, Ceramic|C11|0603-CAP|CAPACITOR-0603|1|AVX Corporation|06033C103JAT2A|Digi-Key|USD|5000|478-7901-1-ND|9306|350.38786|0.07008|ECM0620|10000pF 8 | PEM-SMTSO-M1.6-2-ET||Fastener, M1.6x2mm, SMTSO, Carbon Steel|Nut 1, Nut 2, Nut 3, Nut 4|PEM-SMTSO-M1.6-2-ET|PEM-SMTSO-M1.6-2-ET|4|PennEngineering|PEM-SMTSO-M1.6-2-ET|PennEngineering|Supplier disabled||PEM-SMTSO-M1.6-2-ET|||0.70|PRT0438| 9 | DF40C-20DP||Connector, HDR, 20Pos, 0.4mm, SMD, GOLD|P1|DF40C-20-DP|DF40C-20DP|1|Hirose Electric Co Ltd|DF40C-20DP-0.4V(51)|Digi-Key|USD|5000|H11618CT-ND|20439|2004.57616|0.40092|ECM0510|DF40C-20DP-0.4V(51) 10 | PCB0004||IMU PCB|PCB0004||PCB_0004|1||||||||||PCB0004|PCB0004 11 | L3GD20||Sensor, Low-power, Three-axis, Angular rate|U1|L3GD20|L3GD20|1|STMICROELECTRONICS|L3GD20|Newark|USD|5000|73T0644|2348|9500|1.90|ECM0827| 12 | LSM303D||Module, 3D Accelerometer, 3D Magnetometer|U2|LSM303D|LSM303D|1|STMicroelectronics|LSM303DTR|Digi-Key|USD|5000|497-13819-1-ND|3822|8725.14366|1.74503|ECM0828| 13 | MPU-6000||3 Axis Accel, 3Axis Gyro|U3|QFN-24|MPU-6000|1|InvenSense|MPU-6000|Digi-Key|USD|5000|1428-1005-1-ND|7574|30424.58829|6.08492|ECM0834| 14 | MS5611-01BA|MS5611-01BA|Board, Digital pressure sensor I2C/SPI|U4|MS5611-01BA|MS5611-01BA|1|Measurement Specialties, Inc.|MS561101BA03-50|Mouser|USD|5000|824-MS561101BA03-50|0|33659.0006|6.7318|ECM0835| 15 | -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.PcbDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/IMU_REV_C.PcbDoc -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.PcbLib: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/IMU_REV_C.PcbLib -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.PrjPcbStructure: -------------------------------------------------------------------------------- 1 | Record=TopLevelDocument|FileName=IMU_REV_C.SchDoc 2 | -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.SCHLIB: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/IMU_REV_C.SCHLIB -------------------------------------------------------------------------------- /IMUv3_REV_C/IMU_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/IMU_REV_C.SchDoc -------------------------------------------------------------------------------- /IMUv3_REV_C/PCB 3D Print/PCB 3D Print from Above.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/PCB 3D Print/PCB 3D Print from Above.PDF -------------------------------------------------------------------------------- /IMUv3_REV_C/PCB 3D Print/PCB 3D Print from below.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/PCB 3D Print/PCB 3D Print from below.PDF -------------------------------------------------------------------------------- /IMUv3_REV_C/PCB Print/Assembly.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/PCB Print/Assembly.PDF -------------------------------------------------------------------------------- /IMUv3_REV_C/Project Outputs for IMU_REV_C/IMU_REV_C.xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/Project Outputs for IMU_REV_C/IMU_REV_C.xlsx -------------------------------------------------------------------------------- /IMUv3_REV_C/Report Board Stack/Report Board Stack.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/Report Board Stack/Report Board Stack.PDF -------------------------------------------------------------------------------- /IMUv3_REV_C/Schematic Print/Schematic Prints.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/IMUv3_REV_C/Schematic Print/Schematic Prints.PDF -------------------------------------------------------------------------------- /Installing_Altium_Viewer.txt: -------------------------------------------------------------------------------- 1 | go to http://www.altium.com/altium-designer-viewer 2 | Register for your Free license. 3 | 4 | With this license you can use most features of altium within this file, ie, cross probing, viewing etc... 5 | 6 | To edit, you will need a licenced version of Altium. 7 | 8 | As the FMU is 8 layers, it cannot be made in the free version of Eagle... but I would be happy if someone 9 | could help with the conversion to any other file formats. 10 | 11 | Please contact me by raising an issue here. 12 | -------------------------------------------------------------------------------- /MindPXv2/IMU.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/IMU.pdf -------------------------------------------------------------------------------- /MindPXv2/MINDPX V2.8 SCH.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MINDPX V2.8 SCH.pdf -------------------------------------------------------------------------------- /MindPXv2/MINDPX22.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MINDPX22.pdf -------------------------------------------------------------------------------- /MindPXv2/MINDRACER V12 SCH.pdf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MINDRACER V12 SCH.pdf -------------------------------------------------------------------------------- /MindPXv2/MINDRACER-V12.DSN: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MINDRACER-V12.DSN -------------------------------------------------------------------------------- /MindPXv2/MindPX V2.8 SCH.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MindPX V2.8 SCH.SchDoc -------------------------------------------------------------------------------- /MindPXv2/MindPX2.2.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/MindPX2.2.SchDoc -------------------------------------------------------------------------------- /MindPXv2/README.md: -------------------------------------------------------------------------------- 1 | # MindPX V2 Hardware 2 | 3 | http://www.mindpx.net 4 | 5 | MindPX V2.8 board 6 | 7 | Product brief: 8 | http://www.mindpx.net/assets/accessories/brochure.pdf 9 | 10 | Hardware specification: 11 | http://www.mindpx.net/assets/accessories/Specification_MindPX.pdf 12 | 13 | User manual: 14 | http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf 15 | 16 | Key features of v2.8: 17 | 18 | 1. 8 main PWM outputs + 8 aux PWM outputs 19 | 2. Dual-redundancy IMU components (onboard HMC5883L compass) 20 | 3. Support PPM/SBUS/SPEKTRUM DSM/Satellite RC input 21 | 4. Support FrSky/Wifi telemetry 22 | 5. One extra I2C port (so can support external compass and px4flow simultaneously) 23 | 6. Secondary USB port for companion computer (converted from UART2 using onboard CP2104) 24 | 7. nrf/SPI port for SPI devices 25 | 8. exposed SWD debug port 26 | 9. Built-in vibration dampening for isolated IMU, support hard mount on air frames. 27 | 10. LTC2875 as CAN controller (+/- 60V overvoltage fault protection) 28 | 29 | MindRacer V1.2 board (Hardware version: v1.2) 30 | 31 | MindRacer specification: 32 | http://mindpx.net/assets/accessories/mindracer_spec_v1.2.pdf 33 | 34 | MindRacer user manual: 35 | http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf 36 | 37 | Key features of v1.2: 38 | 39 | 1. 35 x 35mm (30.5 mm mounting holes) ultra mini size, weighs about 6g 40 | 2. STM32F427 as processor 41 | 3. 6 main PWM outputs 42 | 4. onboard MPU6500 & HMC5883L 43 | 5. dual 2x7 stackable header pins for I/O port replication/expansion 44 | 6. optional IMU isolation mounting support 45 | 7. Support PPM/SBUS/SPEKTRUM DSM/Satellite RC input 46 | 8. Support FrSky/Wifi telemetry 47 | 9. Onboard RTC battery and TF card slot 48 | 10. DroneCode standard connectors 49 | 50 | Note: MindPX v2.8 & MindRacer v1.2 share same firmware. 51 | 52 | 53 | ## Licensing & Trademarks 54 | 55 | Information on licensing and trademarks for Pixhawk designs can be found here: [Pixhawk Licensing](../README.md#license) 56 | -------------------------------------------------------------------------------- /MindPXv2/imu.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/MindPXv2/imu.SchDoc -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB Fab Documentation.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB Fab Documentation.PDF -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.EXTREP: -------------------------------------------------------------------------------- 1 | ------------------------------------------------------------------------------------------ 2 | Gerber File Extension Report For: 830-00011 Microhard Module Breakout Board.GBR 03.05.2022 10:58:18 3 | ------------------------------------------------------------------------------------------ 4 | 5 | 6 | ------------------------------------------------------------------------------------------ 7 | Layer Extension Layer Description 8 | ------------------------------------------------------------------------------------------ 9 | .GTO Top Overlay 10 | .GTP Top Paste 11 | .GTS Top Solder 12 | .GTL Top Layer 13 | .GP1 Int1 (GND) 14 | .GP2 Int2 (GND) 15 | .GBL Bottom Layer 16 | .GBS Bottom Solder 17 | .GBO Bottom Overlay 18 | .GM1 Outline 19 | .GM2 Dimensions 20 | ------------------------------------------------------------------------------------------ 21 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GBS: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,3E136D79-123B-44AF-942A-25470D1848A4* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Negative* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD59O,1.2000X2.7000*% 17 | %ADD60O,1.2000X2.2000*% 18 | %ADD61C,2.9000*% 19 | %ADD62C,3.1000*% 20 | %ADD63C,3.6000*% 21 | %ADD64C,1.6900*% 22 | %ADD65R,1.6900X1.6900*% 23 | %ADD66C,1.5500*% 24 | D59* 25 | X28050Y874100D02* 26 | D03* 27 | X120450Y874100D02* 28 | D03* 29 | D60* 30 | X31050Y820500D02* 31 | D03* 32 | X117450D02* 33 | D03* 34 | D61* 35 | X39500Y634250D02* 36 | D03* 37 | X529500Y177250D02* 38 | D03* 39 | D62* 40 | X139500Y663250D02* 41 | D03* 42 | D63* 43 | X528250Y845950D02* 44 | D03* 45 | X455250D02* 46 | D03* 47 | D64* 48 | X506750Y802750D02* 49 | D03* 50 | D65* 51 | X476750D02* 52 | D03* 53 | D66* 54 | X378500Y650250D02* 55 | D03* 56 | X190500D02* 57 | D03* 58 | M02* 59 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GM1: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,3E136D79-123B-44AF-942A-25470D1848A4* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD13C,0.2000*% 17 | D13* 18 | X569500Y879750D02* 19 | X569500Y11750D01* 20 | X569199Y882420D02* 21 | X569500Y879750D01* 22 | X568312Y884957D02* 23 | X569199Y882420D01* 24 | X566882Y887232D02* 25 | X568312Y884957D01* 26 | X564982Y889132D02* 27 | X566882Y887232D01* 28 | X562707Y890562D02* 29 | X564982Y889132D01* 30 | X560170Y891449D02* 31 | X562707Y890562D01* 32 | X557500Y891750D02* 33 | X560170Y891449D01* 34 | X12000Y891750D02* 35 | X557500D01* 36 | X9330Y891449D02* 37 | X12000Y891750D01* 38 | X6793Y890562D02* 39 | X9330Y891449D01* 40 | X4518Y889132D02* 41 | X6793Y890562D01* 42 | X2618Y887232D02* 43 | X4518Y889132D01* 44 | X1188Y884957D02* 45 | X2618Y887232D01* 46 | X301Y882420D02* 47 | X1188Y884957D01* 48 | X0Y879750D02* 49 | X301Y882420D01* 50 | X-0Y879750D02* 51 | X-0Y11750D01* 52 | X301Y9080D01* 53 | X1188Y6543D01* 54 | X2618Y4268D01* 55 | X4518Y2368D01* 56 | X6793Y938D01* 57 | X9330Y51D01* 58 | X12000Y-250D01* 59 | X557500D01* 60 | X560170Y51D01* 61 | X562707Y938D01* 62 | X564982Y2368D01* 63 | X566882Y4268D01* 64 | X568312Y6543D01* 65 | X569199Y9080D01* 66 | X569500Y11750D01* 67 | M02* 68 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GM2: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=8388736* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,3E136D79-123B-44AF-942A-25470D1848A4* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD98C,0.2540*% 17 | %ADD99C,0.1524*% 18 | D98* 19 | X-25330Y14990D02* 20 | X-20250Y-250D01* 21 | X-15170Y14990D01* 22 | X-20250Y891750D02* 23 | X-15170Y876510D01* 24 | X-25330D02* 25 | X-20250Y891750D01* 26 | Y-250D02* 27 | Y388108D01* 28 | Y495264D02* 29 | Y891750D01* 30 | X-22790Y-250D02* 31 | X8460D01* 32 | X-22790Y891750D02* 33 | X8460D01* 34 | X-0Y-15500D02* 35 | X15240Y-10420D01* 36 | X-0Y-15500D02* 37 | X15240Y-20580D01* 38 | X554260D02* 39 | X569500Y-15500D01* 40 | X554260Y-10420D02* 41 | X569500Y-15500D01* 42 | X-0D02* 43 | X227108D01* 44 | X334264D02* 45 | X569500D01* 46 | X-0Y-18040D02* 47 | Y8210D01* 48 | X569500Y-18040D02* 49 | Y8210D01* 50 | D99* 51 | X-23804Y392172D02* 52 | X-26344Y394711D01* 53 | Y399790D01* 54 | X-23804Y402329D01* 55 | X-21265D01* 56 | X-18726Y399790D01* 57 | X-16187Y402329D01* 58 | X-13648D01* 59 | X-11108Y399790D01* 60 | Y394711D01* 61 | X-13648Y392172D01* 62 | X-16187D01* 63 | X-18726Y394711D01* 64 | X-21265Y392172D01* 65 | X-23804D01* 66 | X-18726Y394711D02* 67 | Y399790D01* 68 | X-13648Y407407D02* 69 | X-11108Y409946D01* 70 | Y415025D01* 71 | X-13648Y417564D01* 72 | X-23804D01* 73 | X-26344Y415025D01* 74 | Y409946D01* 75 | X-23804Y407407D01* 76 | X-21265D01* 77 | X-18726Y409946D01* 78 | Y417564D01* 79 | X-11108Y422642D02* 80 | X-13648D01* 81 | Y425181D01* 82 | X-11108D01* 83 | Y422642D01* 84 | Y445495D02* 85 | Y435338D01* 86 | X-21265Y445495D01* 87 | X-23804D01* 88 | X-26344Y442956D01* 89 | Y437877D01* 90 | X-23804Y435338D01* 91 | Y450573D02* 92 | X-26344Y453112D01* 93 | Y458191D01* 94 | X-23804Y460730D01* 95 | X-13648D01* 96 | X-11108Y458191D01* 97 | Y453112D01* 98 | X-13648Y450573D01* 99 | X-23804D01* 100 | X-11108Y465808D02* 101 | X-21265D01* 102 | Y468347D01* 103 | X-18726Y470886D01* 104 | X-11108D01* 105 | X-18726D01* 106 | X-21265Y473426D01* 107 | X-18726Y475965D01* 108 | X-11108D01* 109 | Y481043D02* 110 | X-21265D01* 111 | Y483582D01* 112 | X-18726Y486122D01* 113 | X-11108D01* 114 | X-18726D01* 115 | X-21265Y488661D01* 116 | X-18726Y491200D01* 117 | X-11108D01* 118 | X241329Y-9406D02* 119 | X231172D01* 120 | Y-17024D01* 121 | X236250Y-14485D01* 122 | X238790D01* 123 | X241329Y-17024D01* 124 | Y-22102D01* 125 | X238790Y-24641D01* 126 | X233711D01* 127 | X231172Y-22102D01* 128 | X256564Y-9406D02* 129 | X251485Y-11946D01* 130 | X246407Y-17024D01* 131 | Y-22102D01* 132 | X248946Y-24641D01* 133 | X254025D01* 134 | X256564Y-22102D01* 135 | Y-19563D01* 136 | X254025Y-17024D01* 137 | X246407D01* 138 | X261642Y-24641D02* 139 | Y-22102D01* 140 | X264181D01* 141 | Y-24641D01* 142 | X261642D01* 143 | X274338Y-22102D02* 144 | X276877Y-24641D01* 145 | X281956D01* 146 | X284495Y-22102D01* 147 | Y-11946D01* 148 | X281956Y-9406D01* 149 | X276877D01* 150 | X274338Y-11946D01* 151 | Y-14485D01* 152 | X276877Y-17024D01* 153 | X284495D01* 154 | X299730Y-9406D02* 155 | X289573D01* 156 | Y-17024D01* 157 | X294651Y-14485D01* 158 | X297191D01* 159 | X299730Y-17024D01* 160 | Y-22102D01* 161 | X297191Y-24641D01* 162 | X292112D01* 163 | X289573Y-22102D01* 164 | X304808Y-24641D02* 165 | Y-14485D01* 166 | X307347D01* 167 | X309886Y-17024D01* 168 | Y-24641D01* 169 | Y-17024D01* 170 | X312426Y-14485D01* 171 | X314965Y-17024D01* 172 | Y-24641D01* 173 | X320043D02* 174 | Y-14485D01* 175 | X322582D01* 176 | X325121Y-17024D01* 177 | Y-24641D01* 178 | Y-17024D01* 179 | X327661Y-14485D01* 180 | X330200Y-17024D01* 181 | Y-24641D01* 182 | M02* 183 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GP1: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Physical_Order=2* 5 | G04 Layer_Color=32768* 6 | %FSLAX44Y44*% 7 | %MOMM*% 8 | G71* 9 | G04* 10 | G04 #@! TF.SameCoordinates,3E136D79-123B-44AF-942A-25470D1848A4* 11 | G04* 12 | G04* 13 | G04 #@! TF.FilePolarity,Negative* 14 | G04* 15 | G01* 16 | G75* 17 | %ADD85C,0.6000*% 18 | %AMTHOVALD86* 19 | 21,1,1.4000,1.4160,0,0,90.0* 20 | 1,1,1.4160,0.0000,-0.7000* 21 | 1,1,1.4160,0.0000,0.7000* 22 | 21,0,1.4000,0.9080,0,0,90.0* 23 | 1,0,0.9080,0.0000,-0.7000* 24 | 1,0,0.9080,0.0000,0.7000* 25 | 4,0,4,0.0898,-0.6102,0.5904,-1.1108,0.4108,-1.2904,-0.0898,-0.7898,0.0898,-0.6102,0.0* 26 | 4,0,4,0.0898,0.7898,-0.4108,1.2904,-0.5904,1.1108,-0.0898,0.6102,0.0898,0.7898,0.0* 27 | 4,0,4,0.0898,-0.7898,-0.4108,-1.2904,-0.5904,-1.1108,-0.0898,-0.6102,0.0898,-0.7898,0.0* 28 | 4,0,4,0.0898,0.6102,0.5904,1.1108,0.4108,1.2904,-0.0898,0.7898,0.0898,0.6102,0.0* 29 | % 30 | %ADD86THOVALD86*% 31 | 32 | %AMTHOVALD87* 33 | 21,1,1.0000,1.4160,0,0,90.0* 34 | 1,1,1.4160,0.0000,-0.5000* 35 | 1,1,1.4160,0.0000,0.5000* 36 | 21,0,1.0000,0.9080,0,0,90.0* 37 | 1,0,0.9080,0.0000,-0.5000* 38 | 1,0,0.9080,0.0000,0.5000* 39 | 4,0,4,0.0898,-0.4102,0.5904,-0.9108,0.4108,-1.0904,-0.0898,-0.5898,0.0898,-0.4102,0.0* 40 | 4,0,4,0.0898,0.5898,-0.4108,1.0904,-0.5904,0.9108,-0.0898,0.4102,0.0898,0.5898,0.0* 41 | 4,0,4,0.0898,-0.5898,-0.4108,-1.0904,-0.5904,-0.9108,-0.0898,-0.4102,0.0898,-0.5898,0.0* 42 | 4,0,4,0.0898,0.4102,0.5904,0.9108,0.4108,1.0904,-0.0898,0.5898,0.0898,0.4102,0.0* 43 | % 44 | %ADD87THOVALD87*% 45 | 46 | %ADD88C,3.5000*% 47 | %ADD89C,3.3000*% 48 | G04:AMPARAMS|DCode=90|XSize=3.426mm|YSize=3.426mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 49 | %AMTHD90* 50 | 7,0,0,3.4260,2.9180,0.2540,45* 51 | % 52 | %ADD90THD90*% 53 | %ADD91C,1.3600*% 54 | G04:AMPARAMS|DCode=92|XSize=2.076mm|YSize=2.076mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 55 | %AMTHD92* 56 | 7,0,0,2.0760,1.5680,0.2540,45* 57 | % 58 | %ADD92THD92*% 59 | %ADD93C,1.7500*% 60 | %ADD94C,0.5000*% 61 | D85* 62 | X2618Y4268D02* 63 | X4518Y2368D01* 64 | X6793Y938D01* 65 | X9330Y51D01* 66 | X12000Y-250D01* 67 | X557500D01* 68 | X560170Y51D01* 69 | X562707Y938D01* 70 | X564982Y2368D01* 71 | X566882Y4268D01* 72 | X568312Y6543D01* 73 | X569199Y9080D01* 74 | X569500Y11750D01* 75 | X569500Y879750D01* 76 | X569199Y882420D02* 77 | X569500Y879750D01* 78 | X568312Y884957D02* 79 | X569199Y882420D01* 80 | X566882Y887232D02* 81 | X568312Y884957D01* 82 | X564982Y889132D02* 83 | X566882Y887232D01* 84 | X562707Y890562D02* 85 | X564982Y889132D01* 86 | X560170Y891449D02* 87 | X562707Y890562D01* 88 | X557500Y891750D02* 89 | X560170Y891449D01* 90 | X12000Y891750D02* 91 | X557500D01* 92 | X9330Y891449D02* 93 | X12000Y891750D01* 94 | X6793Y890562D02* 95 | X9330Y891449D01* 96 | X4518Y889132D02* 97 | X6793Y890562D01* 98 | X2618Y887232D02* 99 | X4518Y889132D01* 100 | X1188Y884957D02* 101 | X2618Y887232D01* 102 | X301Y882420D02* 103 | X1188Y884957D01* 104 | X-0Y879750D02* 105 | X301Y882420D01* 106 | X-0Y879750D02* 107 | X-0Y11750D01* 108 | X301Y9080D01* 109 | X1188Y6543D01* 110 | X2618Y4268D01* 111 | D86* 112 | X28050Y874100D02* 113 | D03* 114 | X120450Y874100D02* 115 | D03* 116 | D87* 117 | X31050Y820500D02* 118 | D03* 119 | X117450D02* 120 | D03* 121 | D88* 122 | X39500Y634250D02* 123 | D03* 124 | X529500Y177250D02* 125 | D03* 126 | D89* 127 | X139500Y663250D02* 128 | D03* 129 | D90* 130 | X528250Y845950D02* 131 | D03* 132 | X455250D02* 133 | D03* 134 | D91* 135 | X506750Y802750D02* 136 | D03* 137 | D92* 138 | X476750D02* 139 | D03* 140 | D93* 141 | X378500Y650250D02* 142 | D03* 143 | X190500D02* 144 | D03* 145 | D94* 146 | X213580Y768750D02* 147 | D03* 148 | Y801250D02* 149 | D03* 150 | X66750Y837250D02* 151 | D03* 152 | X84250Y822250D02* 153 | D03* 154 | X71750Y823750D02* 155 | D03* 156 | X79250Y817750D02* 157 | D03* 158 | X365750Y832750D02* 159 | D03* 160 | Y626250D02* 161 | D03* 162 | X353250Y832750D02* 163 | D03* 164 | X353140Y630314D02* 165 | D03* 166 | X340750Y832750D02* 167 | D03* 168 | Y634750D02* 169 | D03* 170 | X328250Y832750D02* 171 | D03* 172 | X336750Y638750D02* 173 | D03* 174 | X198250Y832750D02* 175 | D03* 176 | X203750D02* 177 | D03* 178 | X232080Y669750D02* 179 | D03* 180 | Y664250D02* 181 | D03* 182 | X229250Y832750D02* 183 | D03* 184 | X222750D02* 185 | D03* 186 | X241250Y638750D02* 187 | D03* 188 | X247750D02* 189 | D03* 190 | M02* 191 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GP2: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Physical_Order=3* 5 | G04 Layer_Color=128* 6 | %FSLAX44Y44*% 7 | %MOMM*% 8 | G71* 9 | G04* 10 | G04 #@! TF.SameCoordinates,3E136D79-123B-44AF-942A-25470D1848A4* 11 | G04* 12 | G04* 13 | G04 #@! TF.FilePolarity,Negative* 14 | G04* 15 | G01* 16 | G75* 17 | %ADD85C,0.6000*% 18 | %AMTHOVALD86* 19 | 21,1,1.4000,1.4160,0,0,90.0* 20 | 1,1,1.4160,0.0000,-0.7000* 21 | 1,1,1.4160,0.0000,0.7000* 22 | 21,0,1.4000,0.9080,0,0,90.0* 23 | 1,0,0.9080,0.0000,-0.7000* 24 | 1,0,0.9080,0.0000,0.7000* 25 | 4,0,4,0.0898,-0.6102,0.5904,-1.1108,0.4108,-1.2904,-0.0898,-0.7898,0.0898,-0.6102,0.0* 26 | 4,0,4,0.0898,0.7898,-0.4108,1.2904,-0.5904,1.1108,-0.0898,0.6102,0.0898,0.7898,0.0* 27 | 4,0,4,0.0898,-0.7898,-0.4108,-1.2904,-0.5904,-1.1108,-0.0898,-0.6102,0.0898,-0.7898,0.0* 28 | 4,0,4,0.0898,0.6102,0.5904,1.1108,0.4108,1.2904,-0.0898,0.7898,0.0898,0.6102,0.0* 29 | % 30 | %ADD86THOVALD86*% 31 | 32 | %AMTHOVALD87* 33 | 21,1,1.0000,1.4160,0,0,90.0* 34 | 1,1,1.4160,0.0000,-0.5000* 35 | 1,1,1.4160,0.0000,0.5000* 36 | 21,0,1.0000,0.9080,0,0,90.0* 37 | 1,0,0.9080,0.0000,-0.5000* 38 | 1,0,0.9080,0.0000,0.5000* 39 | 4,0,4,0.0898,-0.4102,0.5904,-0.9108,0.4108,-1.0904,-0.0898,-0.5898,0.0898,-0.4102,0.0* 40 | 4,0,4,0.0898,0.5898,-0.4108,1.0904,-0.5904,0.9108,-0.0898,0.4102,0.0898,0.5898,0.0* 41 | 4,0,4,0.0898,-0.5898,-0.4108,-1.0904,-0.5904,-0.9108,-0.0898,-0.4102,0.0898,-0.5898,0.0* 42 | 4,0,4,0.0898,0.4102,0.5904,0.9108,0.4108,1.0904,-0.0898,0.5898,0.0898,0.4102,0.0* 43 | % 44 | %ADD87THOVALD87*% 45 | 46 | %ADD88C,3.5000*% 47 | %ADD89C,3.3000*% 48 | G04:AMPARAMS|DCode=90|XSize=3.426mm|YSize=3.426mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 49 | %AMTHD90* 50 | 7,0,0,3.4260,2.9180,0.2540,45* 51 | % 52 | %ADD90THD90*% 53 | %ADD91C,1.3600*% 54 | G04:AMPARAMS|DCode=92|XSize=2.076mm|YSize=2.076mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 55 | %AMTHD92* 56 | 7,0,0,2.0760,1.5680,0.2540,45* 57 | % 58 | %ADD92THD92*% 59 | %ADD93C,1.7500*% 60 | %ADD94C,0.5000*% 61 | D85* 62 | X2618Y4268D02* 63 | X4518Y2368D01* 64 | X6793Y938D01* 65 | X9330Y51D01* 66 | X12000Y-250D01* 67 | X557500D01* 68 | X560170Y51D01* 69 | X562707Y938D01* 70 | X564982Y2368D01* 71 | X566882Y4268D01* 72 | X568312Y6543D01* 73 | X569199Y9080D01* 74 | X569500Y11750D01* 75 | X569500Y879750D01* 76 | X569199Y882420D02* 77 | X569500Y879750D01* 78 | X568312Y884957D02* 79 | X569199Y882420D01* 80 | X566882Y887232D02* 81 | X568312Y884957D01* 82 | X564982Y889132D02* 83 | X566882Y887232D01* 84 | X562707Y890562D02* 85 | X564982Y889132D01* 86 | X560170Y891449D02* 87 | X562707Y890562D01* 88 | X557500Y891750D02* 89 | X560170Y891449D01* 90 | X12000Y891750D02* 91 | X557500D01* 92 | X9330Y891449D02* 93 | X12000Y891750D01* 94 | X6793Y890562D02* 95 | X9330Y891449D01* 96 | X4518Y889132D02* 97 | X6793Y890562D01* 98 | X2618Y887232D02* 99 | X4518Y889132D01* 100 | X1188Y884957D02* 101 | X2618Y887232D01* 102 | X301Y882420D02* 103 | X1188Y884957D01* 104 | X-0Y879750D02* 105 | X301Y882420D01* 106 | X-0Y879750D02* 107 | X-0Y11750D01* 108 | X301Y9080D01* 109 | X1188Y6543D01* 110 | X2618Y4268D01* 111 | D86* 112 | X28050Y874100D02* 113 | D03* 114 | X120450Y874100D02* 115 | D03* 116 | D87* 117 | X31050Y820500D02* 118 | D03* 119 | X117450D02* 120 | D03* 121 | D88* 122 | X39500Y634250D02* 123 | D03* 124 | X529500Y177250D02* 125 | D03* 126 | D89* 127 | X139500Y663250D02* 128 | D03* 129 | D90* 130 | X528250Y845950D02* 131 | D03* 132 | X455250D02* 133 | D03* 134 | D91* 135 | X506750Y802750D02* 136 | D03* 137 | D92* 138 | X476750D02* 139 | D03* 140 | D93* 141 | X378500Y650250D02* 142 | D03* 143 | X190500D02* 144 | D03* 145 | D94* 146 | X213580Y768750D02* 147 | D03* 148 | Y801250D02* 149 | D03* 150 | X66750Y837250D02* 151 | D03* 152 | X84250Y822250D02* 153 | D03* 154 | X71750Y823750D02* 155 | D03* 156 | X79250Y817750D02* 157 | D03* 158 | X365750Y832750D02* 159 | D03* 160 | Y626250D02* 161 | D03* 162 | X353250Y832750D02* 163 | D03* 164 | X353140Y630314D02* 165 | D03* 166 | X340750Y832750D02* 167 | D03* 168 | Y634750D02* 169 | D03* 170 | X328250Y832750D02* 171 | D03* 172 | X336750Y638750D02* 173 | D03* 174 | X198250Y832750D02* 175 | D03* 176 | X203750D02* 177 | D03* 178 | X232080Y669750D02* 179 | D03* 180 | Y664250D02* 181 | D03* 182 | X229250Y832750D02* 183 | D03* 184 | X222750D02* 185 | D03* 186 | X241250Y638750D02* 187 | D03* 188 | X247750D02* 189 | D03* 190 | M02* 191 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.REP: -------------------------------------------------------------------------------- 1 | ************************************************************* 2 | FileName = 830-00011 Microhard Module Breakout Board.GBR 3 | AutoAperture = True 4 | ************************************************************* 5 | Generating : Dimensions 6 | File : 830-00011 Microhard Module Breakout Board.GM2 7 | 8 | Adding Layer : Dimensions 9 | 10 | 11 | Used DCodes : 12 | D98 13 | D99 14 | ************************************************************* 15 | 16 | ************************************************************* 17 | Generating : Outline 18 | File : 830-00011 Microhard Module Breakout Board.GM1 19 | 20 | Adding Layer : Outline 21 | 22 | 23 | Used DCodes : 24 | D13 25 | ************************************************************* 26 | 27 | ************************************************************* 28 | Generating : Bottom Overlay 29 | File : 830-00011 Microhard Module Breakout Board.GBO 30 | 31 | Adding Layer : Bottom Overlay 32 | 33 | 34 | Used DCodes : 35 | D96 36 | D97 37 | ************************************************************* 38 | 39 | ************************************************************* 40 | Generating : Bottom Solder 41 | File : 830-00011 Microhard Module Breakout Board.GBS 42 | 43 | Adding Layer : Bottom Solder 44 | 45 | Adding Layer : Bottom Layer 46 | 47 | Adding Layer : Multi-Layer 48 | 49 | 50 | Used DCodes : 51 | D59 52 | D60 53 | D61 54 | D62 55 | D63 56 | D64 57 | D65 58 | D66 59 | ************************************************************* 60 | 61 | ************************************************************* 62 | Generating : Top Solder 63 | File : 830-00011 Microhard Module Breakout Board.GTS 64 | 65 | Adding Layer : Top Solder 66 | 67 | Adding Layer : Top Layer 68 | 69 | Adding Layer : Multi-Layer 70 | 71 | 72 | Used DCodes : 73 | D29 74 | D39 75 | D40 76 | D41 77 | D42 78 | D43 79 | D44 80 | D45 81 | D46 82 | D47 83 | D48 84 | D49 85 | D50 86 | D51 87 | D52 88 | D53 89 | D54 90 | D55 91 | D56 92 | D57 93 | D58 94 | D59 95 | D60 96 | D61 97 | D62 98 | D63 99 | D64 100 | D65 101 | D66 102 | ************************************************************* 103 | 104 | ************************************************************* 105 | Generating : Top Paste 106 | File : 830-00011 Microhard Module Breakout Board.GTP 107 | 108 | Adding Layer : Top Paste 109 | 110 | Adding Layer : Top Layer 111 | 112 | Adding Layer : Multi-Layer 113 | 114 | 115 | Used DCodes : 116 | D17 117 | D18 118 | D19 119 | D20 120 | D21 121 | D22 122 | D23 123 | D24 124 | D25 125 | D26 126 | D27 127 | D28 128 | D29 129 | D30 130 | D31 131 | D32 132 | D33 133 | D34 134 | D35 135 | D36 136 | D37 137 | D38 138 | ************************************************************* 139 | 140 | ************************************************************* 141 | Generating : Top Overlay 142 | File : 830-00011 Microhard Module Breakout Board.GTO 143 | 144 | Adding Layer : Top Overlay 145 | 146 | 147 | Used DCodes : 148 | D10 149 | D11 150 | D12 151 | D13 152 | D14 153 | D15 154 | D16 155 | ************************************************************* 156 | 157 | ************************************************************* 158 | Generating : Bottom Layer 159 | File : 830-00011 Microhard Module Breakout Board.GBL 160 | 161 | Adding Layer : Bottom Layer 162 | 163 | Adding Layer : Multi-Layer 164 | 165 | 166 | Used DCodes : 167 | D14 168 | D68 169 | D69 170 | D76 171 | D77 172 | D78 173 | D79 174 | D80 175 | D81 176 | D82 177 | D83 178 | D84 179 | D95 180 | ************************************************************* 181 | 182 | ************************************************************* 183 | Generating : Int2 (GND) 184 | File : 830-00011 Microhard Module Breakout Board.GP2 185 | 186 | Adding Layer : Int2 (GND) 187 | 188 | Adding Layer : Multi-Layer 189 | 190 | 191 | Used DCodes : 192 | D85 193 | D86 194 | D87 195 | D88 196 | D89 197 | D90 198 | D91 199 | D92 200 | D93 201 | D94 202 | ************************************************************* 203 | 204 | ************************************************************* 205 | Generating : Int1 (GND) 206 | File : 830-00011 Microhard Module Breakout Board.GP1 207 | 208 | Adding Layer : Int1 (GND) 209 | 210 | Adding Layer : Multi-Layer 211 | 212 | 213 | Used DCodes : 214 | D85 215 | D86 216 | D87 217 | D88 218 | D89 219 | D90 220 | D91 221 | D92 222 | D93 223 | D94 224 | ************************************************************* 225 | 226 | ************************************************************* 227 | Generating : Top Layer 228 | File : 830-00011 Microhard Module Breakout Board.GTL 229 | 230 | Adding Layer : Top Layer 231 | 232 | Adding Layer : Multi-Layer 233 | 234 | 235 | Used DCodes : 236 | D12 237 | D14 238 | D15 239 | D18 240 | D19 241 | D20 242 | D21 243 | D22 244 | D23 245 | D24 246 | D25 247 | D26 248 | D27 249 | D28 250 | D29 251 | D30 252 | D31 253 | D32 254 | D33 255 | D34 256 | D35 257 | D36 258 | D37 259 | D38 260 | D67 261 | D68 262 | D69 263 | D70 264 | D71 265 | D72 266 | D73 267 | D74 268 | D75 269 | D76 270 | D77 271 | D78 272 | D79 273 | D80 274 | D81 275 | D82 276 | D83 277 | D84 278 | ************************************************************* 279 | 280 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.RUL: -------------------------------------------------------------------------------- 1 | DRC Rules Export File for PCB: C:\Users\chris\AppData\Local\TempReleases\Snapshot\1\830-00011 Microhard Module Breakout Board.PcbDoc 2 | RuleKind=MinimumAnnularRing|RuleName=MinimumAnnularRing|Scope=Board|Minimum=3.94 3 | RuleKind=Clearance|RuleName=Clearance_ETH_TX|Scope=Board|Minimum=29.53 4 | RuleKind=Clearance|RuleName=Clearance_ETH_RX|Scope=Board|Minimum=29.53 5 | RuleKind=Clearance|RuleName=Clearance_USB|Scope=Board|Minimum=23.62 6 | RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97 7 | RuleKind=Width|RuleName=Width|Scope=Board|Minimum=5.91 8 | RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=5.91 9 | RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0 10 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.apr: -------------------------------------------------------------------------------- 1 | D10 ROUNDED 3.937 3.937 0.000 LINE 0.000 2 | D11 ROUNDED 9.842 9.842 0.000 LINE 0.000 3 | D12 ROUNDED 11.811 11.811 0.000 LINE 0.000 4 | D13 ROUNDED 7.874 7.874 0.000 LINE 0.000 5 | D14 ROUNDED 5.906 5.906 0.000 LINE 0.000 6 | D15 ROUNDED 15.748 15.748 0.000 LINE 0.000 7 | D16 ROUNDED 4.724 4.724 0.000 LINE 0.000 8 | D17 ROUNDED 43.307 82.677 0.000 FLASH 180.000 9 | D18 ROUNDED 43.307 141.732 0.000 FLASH 180.000 10 | D19 RECTANGULAR 35.433 27.559 0.000 FLASH 0.000 11 | D20 RECTANGULAR 11.811 27.559 0.000 FLASH 0.000 12 | D21 RECTANGULAR 15.748 13.780 0.000 FLASH 0.000 13 | D22 RECTANGULAR 19.685 15.748 0.000 FLASH 90.000 14 | D23 RECTANGULAR 36.221 11.220 0.000 FLASH 90.000 15 | D24 RECTANGULAR 62.992 41.339 0.000 FLASH 90.000 16 | D26 RECTANGULAR 18.898 15.748 0.000 FLASH 90.000 17 | D29 ROUNDED 13.780 13.780 0.000 FLASH 0.000 18 | D33 RECTANGULAR 84.646 96.457 0.000 FLASH 90.000 19 | D35 RECTANGULAR 57.087 124.016 0.000 FLASH 90.000 20 | D38 RECTANGULAR 19.685 43.307 0.000 FLASH 0.000 21 | D39 ROUNDED 47.244 145.669 0.000 FLASH 180.000 22 | D40 RECTANGULAR 39.370 31.496 0.000 FLASH 0.000 23 | D41 RECTANGULAR 15.748 31.496 0.000 FLASH 0.000 24 | D42 RECTANGULAR 19.685 17.716 0.000 FLASH 0.000 25 | D43 RECTANGULAR 23.622 19.685 0.000 FLASH 90.000 26 | D44 RECTANGULAR 40.157 15.158 0.000 FLASH 90.000 27 | D45 RECTANGULAR 66.929 45.276 0.000 FLASH 90.000 28 | D47 RECTANGULAR 22.835 19.685 0.000 FLASH 90.000 29 | D53 RECTANGULAR 88.583 100.394 0.000 FLASH 90.000 30 | D55 RECTANGULAR 61.024 127.953 0.000 FLASH 90.000 31 | D58 RECTANGULAR 23.622 47.244 0.000 FLASH 0.000 32 | D59 ROUNDED 106.299 47.244 0.000 FLASH 90.000 33 | D60 ROUNDED 86.614 47.244 0.000 FLASH 90.000 34 | D61 ROUNDED 114.173 114.173 0.000 FLASH 0.000 35 | D62 ROUNDED 122.047 122.047 0.000 FLASH 0.000 36 | D63 ROUNDED 141.732 141.732 0.000 FLASH 0.000 37 | D64 ROUNDED 66.535 66.535 0.000 FLASH 0.000 38 | D65 RECTANGULAR 66.535 66.535 0.000 FLASH 0.000 39 | D66 ROUNDED 61.024 61.024 0.000 FLASH 0.000 40 | D67 ROUNDED 19.685 19.685 0.000 LINE 0.000 41 | D68 ROUNDED 6.890 6.890 0.000 LINE 0.000 42 | D69 ROUNDED 6.575 6.575 0.000 LINE 0.000 43 | D70 ROUNDED 59.055 59.055 0.000 LINE 0.000 44 | D71 RECTANGULAR 74.803 47.244 0.000 FLASH 0.000 45 | D72 RECTANGULAR 33.465 102.362 0.000 FLASH 0.000 46 | D73 RECTANGULAR 114.173 137.795 0.000 FLASH 0.000 47 | D74 RECTANGULAR 84.646 49.213 0.000 FLASH 0.000 48 | D75 RECTANGULAR 78.740 47.244 0.000 FLASH 0.000 49 | D76 ROUNDED 102.362 43.307 0.000 FLASH 90.000 50 | D77 ROUNDED 82.677 43.307 0.000 FLASH 90.000 51 | D78 ROUNDED 110.236 110.236 0.000 FLASH 0.000 52 | D79 ROUNDED 118.110 118.110 0.000 FLASH 0.000 53 | D80 ROUNDED 137.795 137.795 0.000 FLASH 0.000 54 | D81 ROUNDED 62.598 62.598 0.000 FLASH 0.000 55 | D82 RECTANGULAR 62.598 62.598 0.000 FLASH 0.000 56 | D83 ROUNDED 57.087 57.087 0.000 FLASH 0.000 57 | D84 ROUNDED 15.748 15.748 0.000 FLASH 0.000 58 | D85 ROUNDED 23.622 23.622 0.000 LINE 0.000 59 | D88 ROUNDED 137.795 137.795 0.000 FLASH 0.000 60 | D89 ROUNDED 129.921 129.921 0.000 FLASH 0.000 61 | D90 RELIEF 134.882 134.882 0.000 FLASH 10.000 10.000 4 0.000 62 | D91 ROUNDED 53.543 53.543 0.000 FLASH 0.000 63 | D92 RELIEF 81.732 81.732 0.000 FLASH 10.000 10.000 4 0.000 64 | D93 ROUNDED 68.898 68.898 0.000 FLASH 0.000 65 | D94 ROUNDED 19.685 19.685 0.000 FLASH 0.000 66 | D95 RECTANGULAR 131.890 64.961 0.000 FLASH 0.000 67 | D96 ROUNDED 1.000 1.000 0.000 LINE 0.000 68 | D97 RECTANGULAR 303.150 51.181 0.000 FLASH 0.000 69 | D98 ROUNDED 10.000 10.000 0.000 LINE 0.000 70 | D99 ROUNDED 6.000 6.000 0.000 LINE 0.000 71 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/NC Drill/830-00011 Microhard Module Breakout Board-SlotHoles.TXT: -------------------------------------------------------------------------------- 1 | M48 2 | ;Layer_Color=9474304 3 | ;FILE_FORMAT=4:4 4 | METRIC,LZ 5 | ;TYPE=PLATED 6 | T2F00S00C0.4000 7 | ;TYPE=NON_PLATED 8 | % 9 | G90 10 | G05 11 | T02 12 | G00X0003105Y008155 13 | M15 14 | G01Y008255 15 | M16 16 | G00X0002805Y008671 17 | M15 18 | G01Y008811 19 | M16 20 | G00X0012045Y008671 21 | M15 22 | G01Y008811 23 | M16 24 | G00X0011745Y008155 25 | M15 26 | G01Y008255 27 | M16 28 | M17 29 | M30 30 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/NC Drill/830-00011 Microhard Module Breakout Board.DRR: -------------------------------------------------------------------------------- 1 | ---------------------------------------------------------------------------------------------------------------------------------- 2 | NCDrill File Report For: 830-00011 Microhard Module Breakout Board.PcbDoc 03.05.2022 10:58:20 3 | ---------------------------------------------------------------------------------------------------------------------------------- 4 | 5 | Layer Pair : Top Layer to Bottom Layer 6 | ASCII RoundHoles File : 830-00011 Microhard Module Breakout Board-RoundHoles.TXT 7 | ASCII SlotHoles File : 830-00011 Microhard Module Breakout Board-SlotHoles.TXT 8 | 9 | Tool Hole Size Hole Tolerance Hole Type Hole Count Plated Tool Travel 10 | ---------------------------------------------------------------------------------------------------------------------------------- 11 | T1 0.2mm (8mil) Round 715 PTH 2046.47mm (80.57inch) 12 | T2 0.4mm (16mil) Slot 4 PTH 45.26mm (1.78inch) 13 | T3 1.06mm (42mil) Round 2 PTH 3.00mm (0.12inch) 14 | T4 2.41mm (95mil) Round 2 PTH 7.30mm (0.29inch) 15 | T5 1.45mm (57mil) Round 2 NPTH 18.80mm (0.74inch) 16 | T6 3mm (118mil) Round 1 NPTH 0.00mm (0.00inch) 17 | T7 3.2mm (126mil) Round 2 NPTH 67.00mm (2.64inch) 18 | ---------------------------------------------------------------------------------------------------------------------------------- 19 | Totals 728 20 | 21 | Total Processing Time (hh:mm:ss) : 00:00:00 22 | -------------------------------------------------------------------------------- /PRI_Breakout/FAB-830-00011 Microhard Module Breakout Board-1.0.0/PCB and PCBA Files/NC Drill/830-00011 Microhard Module Breakout Board.LDP: -------------------------------------------------------------------------------- 1 | Layer Pairs Export File for PCB: C:\Users\chris\AppData\Local\TempReleases\Snapshot\1\830-00011 Microhard Module Breakout Board.PcbDoc 2 | LayersSetName=Top_Bot_Thru_Holes|DrillFile=830-00011 microhard module breakout board-roundholes.txt|DrillLayers=gtl,gp1,gp2,gbl 3 | LayersSetName=Top_Bot_Slot_Holes|DrillFile=830-00011 microhard module breakout board-slotholes.txt|DrillLayers=gtl,gp1,gp2,gbl 4 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/Assembly Documentation.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/Assembly Documentation.PDF -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/BOM/Bill of Materials-830-00011 Microhard Module Breakout Board.xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/BOM/Bill of Materials-830-00011 Microhard Module Breakout Board.xlsx -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.EXTREP: -------------------------------------------------------------------------------- 1 | ------------------------------------------------------------------------------------------ 2 | Gerber File Extension Report For: 830-00011 Microhard Module Breakout Board.GBR 03.05.2022 10:58:25 3 | ------------------------------------------------------------------------------------------ 4 | 5 | 6 | ------------------------------------------------------------------------------------------ 7 | Layer Extension Layer Description 8 | ------------------------------------------------------------------------------------------ 9 | .GTO Top Overlay 10 | .GTP Top Paste 11 | .GTS Top Solder 12 | .GTL Top Layer 13 | .GP1 Int1 (GND) 14 | .GP2 Int2 (GND) 15 | .GBL Bottom Layer 16 | .GBS Bottom Solder 17 | .GBO Bottom Overlay 18 | .GM1 Outline 19 | .GM2 Dimensions 20 | ------------------------------------------------------------------------------------------ 21 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GBS: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,A2904C07-0F36-4402-9195-DF30BD9EA298* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Negative* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD59O,1.2000X2.7000*% 17 | %ADD60O,1.2000X2.2000*% 18 | %ADD61C,2.9000*% 19 | %ADD62C,3.1000*% 20 | %ADD63C,3.6000*% 21 | %ADD64C,1.6900*% 22 | %ADD65R,1.6900X1.6900*% 23 | %ADD66C,1.5500*% 24 | D59* 25 | X28050Y874100D02* 26 | D03* 27 | X120450Y874100D02* 28 | D03* 29 | D60* 30 | X31050Y820500D02* 31 | D03* 32 | X117450D02* 33 | D03* 34 | D61* 35 | X39500Y634250D02* 36 | D03* 37 | X529500Y177250D02* 38 | D03* 39 | D62* 40 | X139500Y663250D02* 41 | D03* 42 | D63* 43 | X528250Y845950D02* 44 | D03* 45 | X455250D02* 46 | D03* 47 | D64* 48 | X506750Y802750D02* 49 | D03* 50 | D65* 51 | X476750D02* 52 | D03* 53 | D66* 54 | X378500Y650250D02* 55 | D03* 56 | X190500D02* 57 | D03* 58 | M02* 59 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GM1: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,A2904C07-0F36-4402-9195-DF30BD9EA298* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD13C,0.2000*% 17 | D13* 18 | X569500Y879750D02* 19 | X569500Y11750D01* 20 | X569199Y882420D02* 21 | X569500Y879750D01* 22 | X568312Y884957D02* 23 | X569199Y882420D01* 24 | X566882Y887232D02* 25 | X568312Y884957D01* 26 | X564982Y889132D02* 27 | X566882Y887232D01* 28 | X562707Y890562D02* 29 | X564982Y889132D01* 30 | X560170Y891449D02* 31 | X562707Y890562D01* 32 | X557500Y891750D02* 33 | X560170Y891449D01* 34 | X12000Y891750D02* 35 | X557500D01* 36 | X9330Y891449D02* 37 | X12000Y891750D01* 38 | X6793Y890562D02* 39 | X9330Y891449D01* 40 | X4518Y889132D02* 41 | X6793Y890562D01* 42 | X2618Y887232D02* 43 | X4518Y889132D01* 44 | X1188Y884957D02* 45 | X2618Y887232D01* 46 | X301Y882420D02* 47 | X1188Y884957D01* 48 | X0Y879750D02* 49 | X301Y882420D01* 50 | X-0Y879750D02* 51 | X-0Y11750D01* 52 | X301Y9080D01* 53 | X1188Y6543D01* 54 | X2618Y4268D01* 55 | X4518Y2368D01* 56 | X6793Y938D01* 57 | X9330Y51D01* 58 | X12000Y-250D01* 59 | X557500D01* 60 | X560170Y51D01* 61 | X562707Y938D01* 62 | X564982Y2368D01* 63 | X566882Y4268D01* 64 | X568312Y6543D01* 65 | X569199Y9080D01* 66 | X569500Y11750D01* 67 | M02* 68 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GM2: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Color=8388736* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,A2904C07-0F36-4402-9195-DF30BD9EA298* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD98C,0.2540*% 17 | %ADD99C,0.1524*% 18 | D98* 19 | X-25330Y14990D02* 20 | X-20250Y-250D01* 21 | X-15170Y14990D01* 22 | X-20250Y891750D02* 23 | X-15170Y876510D01* 24 | X-25330D02* 25 | X-20250Y891750D01* 26 | Y-250D02* 27 | Y388108D01* 28 | Y495264D02* 29 | Y891750D01* 30 | X-22790Y-250D02* 31 | X8460D01* 32 | X-22790Y891750D02* 33 | X8460D01* 34 | X-0Y-15500D02* 35 | X15240Y-10420D01* 36 | X-0Y-15500D02* 37 | X15240Y-20580D01* 38 | X554260D02* 39 | X569500Y-15500D01* 40 | X554260Y-10420D02* 41 | X569500Y-15500D01* 42 | X-0D02* 43 | X227108D01* 44 | X334264D02* 45 | X569500D01* 46 | X-0Y-18040D02* 47 | Y8210D01* 48 | X569500Y-18040D02* 49 | Y8210D01* 50 | D99* 51 | X-23804Y392172D02* 52 | X-26344Y394711D01* 53 | Y399790D01* 54 | X-23804Y402329D01* 55 | X-21265D01* 56 | X-18726Y399790D01* 57 | X-16187Y402329D01* 58 | X-13648D01* 59 | X-11108Y399790D01* 60 | Y394711D01* 61 | X-13648Y392172D01* 62 | X-16187D01* 63 | X-18726Y394711D01* 64 | X-21265Y392172D01* 65 | X-23804D01* 66 | X-18726Y394711D02* 67 | Y399790D01* 68 | X-13648Y407407D02* 69 | X-11108Y409946D01* 70 | Y415025D01* 71 | X-13648Y417564D01* 72 | X-23804D01* 73 | X-26344Y415025D01* 74 | Y409946D01* 75 | X-23804Y407407D01* 76 | X-21265D01* 77 | X-18726Y409946D01* 78 | Y417564D01* 79 | X-11108Y422642D02* 80 | X-13648D01* 81 | Y425181D01* 82 | X-11108D01* 83 | Y422642D01* 84 | Y445495D02* 85 | Y435338D01* 86 | X-21265Y445495D01* 87 | X-23804D01* 88 | X-26344Y442956D01* 89 | Y437877D01* 90 | X-23804Y435338D01* 91 | Y450573D02* 92 | X-26344Y453112D01* 93 | Y458191D01* 94 | X-23804Y460730D01* 95 | X-13648D01* 96 | X-11108Y458191D01* 97 | Y453112D01* 98 | X-13648Y450573D01* 99 | X-23804D01* 100 | X-11108Y465808D02* 101 | X-21265D01* 102 | Y468347D01* 103 | X-18726Y470886D01* 104 | X-11108D01* 105 | X-18726D01* 106 | X-21265Y473426D01* 107 | X-18726Y475965D01* 108 | X-11108D01* 109 | Y481043D02* 110 | X-21265D01* 111 | Y483582D01* 112 | X-18726Y486122D01* 113 | X-11108D01* 114 | X-18726D01* 115 | X-21265Y488661D01* 116 | X-18726Y491200D01* 117 | X-11108D01* 118 | X241329Y-9406D02* 119 | X231172D01* 120 | Y-17024D01* 121 | X236250Y-14485D01* 122 | X238790D01* 123 | X241329Y-17024D01* 124 | Y-22102D01* 125 | X238790Y-24641D01* 126 | X233711D01* 127 | X231172Y-22102D01* 128 | X256564Y-9406D02* 129 | X251485Y-11946D01* 130 | X246407Y-17024D01* 131 | Y-22102D01* 132 | X248946Y-24641D01* 133 | X254025D01* 134 | X256564Y-22102D01* 135 | Y-19563D01* 136 | X254025Y-17024D01* 137 | X246407D01* 138 | X261642Y-24641D02* 139 | Y-22102D01* 140 | X264181D01* 141 | Y-24641D01* 142 | X261642D01* 143 | X274338Y-22102D02* 144 | X276877Y-24641D01* 145 | X281956D01* 146 | X284495Y-22102D01* 147 | Y-11946D01* 148 | X281956Y-9406D01* 149 | X276877D01* 150 | X274338Y-11946D01* 151 | Y-14485D01* 152 | X276877Y-17024D01* 153 | X284495D01* 154 | X299730Y-9406D02* 155 | X289573D01* 156 | Y-17024D01* 157 | X294651Y-14485D01* 158 | X297191D01* 159 | X299730Y-17024D01* 160 | Y-22102D01* 161 | X297191Y-24641D01* 162 | X292112D01* 163 | X289573Y-22102D01* 164 | X304808Y-24641D02* 165 | Y-14485D01* 166 | X307347D01* 167 | X309886Y-17024D01* 168 | Y-24641D01* 169 | Y-17024D01* 170 | X312426Y-14485D01* 171 | X314965Y-17024D01* 172 | Y-24641D01* 173 | X320043D02* 174 | Y-14485D01* 175 | X322582D01* 176 | X325121Y-17024D01* 177 | Y-24641D01* 178 | Y-17024D01* 179 | X327661Y-14485D01* 180 | X330200Y-17024D01* 181 | Y-24641D01* 182 | M02* 183 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GP1: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Physical_Order=2* 5 | G04 Layer_Color=32768* 6 | %FSLAX44Y44*% 7 | %MOMM*% 8 | G71* 9 | G04* 10 | G04 #@! TF.SameCoordinates,A2904C07-0F36-4402-9195-DF30BD9EA298* 11 | G04* 12 | G04* 13 | G04 #@! TF.FilePolarity,Negative* 14 | G04* 15 | G01* 16 | G75* 17 | %ADD85C,0.6000*% 18 | %AMTHOVALD86* 19 | 21,1,1.4000,1.4160,0,0,90.0* 20 | 1,1,1.4160,0.0000,-0.7000* 21 | 1,1,1.4160,0.0000,0.7000* 22 | 21,0,1.4000,0.9080,0,0,90.0* 23 | 1,0,0.9080,0.0000,-0.7000* 24 | 1,0,0.9080,0.0000,0.7000* 25 | 4,0,4,0.0898,-0.6102,0.5904,-1.1108,0.4108,-1.2904,-0.0898,-0.7898,0.0898,-0.6102,0.0* 26 | 4,0,4,0.0898,0.7898,-0.4108,1.2904,-0.5904,1.1108,-0.0898,0.6102,0.0898,0.7898,0.0* 27 | 4,0,4,0.0898,-0.7898,-0.4108,-1.2904,-0.5904,-1.1108,-0.0898,-0.6102,0.0898,-0.7898,0.0* 28 | 4,0,4,0.0898,0.6102,0.5904,1.1108,0.4108,1.2904,-0.0898,0.7898,0.0898,0.6102,0.0* 29 | % 30 | %ADD86THOVALD86*% 31 | 32 | %AMTHOVALD87* 33 | 21,1,1.0000,1.4160,0,0,90.0* 34 | 1,1,1.4160,0.0000,-0.5000* 35 | 1,1,1.4160,0.0000,0.5000* 36 | 21,0,1.0000,0.9080,0,0,90.0* 37 | 1,0,0.9080,0.0000,-0.5000* 38 | 1,0,0.9080,0.0000,0.5000* 39 | 4,0,4,0.0898,-0.4102,0.5904,-0.9108,0.4108,-1.0904,-0.0898,-0.5898,0.0898,-0.4102,0.0* 40 | 4,0,4,0.0898,0.5898,-0.4108,1.0904,-0.5904,0.9108,-0.0898,0.4102,0.0898,0.5898,0.0* 41 | 4,0,4,0.0898,-0.5898,-0.4108,-1.0904,-0.5904,-0.9108,-0.0898,-0.4102,0.0898,-0.5898,0.0* 42 | 4,0,4,0.0898,0.4102,0.5904,0.9108,0.4108,1.0904,-0.0898,0.5898,0.0898,0.4102,0.0* 43 | % 44 | %ADD87THOVALD87*% 45 | 46 | %ADD88C,3.5000*% 47 | %ADD89C,3.3000*% 48 | G04:AMPARAMS|DCode=90|XSize=3.426mm|YSize=3.426mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 49 | %AMTHD90* 50 | 7,0,0,3.4260,2.9180,0.2540,45* 51 | % 52 | %ADD90THD90*% 53 | %ADD91C,1.3600*% 54 | G04:AMPARAMS|DCode=92|XSize=2.076mm|YSize=2.076mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 55 | %AMTHD92* 56 | 7,0,0,2.0760,1.5680,0.2540,45* 57 | % 58 | %ADD92THD92*% 59 | %ADD93C,1.7500*% 60 | %ADD94C,0.5000*% 61 | D85* 62 | X2618Y4268D02* 63 | X4518Y2368D01* 64 | X6793Y938D01* 65 | X9330Y51D01* 66 | X12000Y-250D01* 67 | X557500D01* 68 | X560170Y51D01* 69 | X562707Y938D01* 70 | X564982Y2368D01* 71 | X566882Y4268D01* 72 | X568312Y6543D01* 73 | X569199Y9080D01* 74 | X569500Y11750D01* 75 | X569500Y879750D01* 76 | X569199Y882420D02* 77 | X569500Y879750D01* 78 | X568312Y884957D02* 79 | X569199Y882420D01* 80 | X566882Y887232D02* 81 | X568312Y884957D01* 82 | X564982Y889132D02* 83 | X566882Y887232D01* 84 | X562707Y890562D02* 85 | X564982Y889132D01* 86 | X560170Y891449D02* 87 | X562707Y890562D01* 88 | X557500Y891750D02* 89 | X560170Y891449D01* 90 | X12000Y891750D02* 91 | X557500D01* 92 | X9330Y891449D02* 93 | X12000Y891750D01* 94 | X6793Y890562D02* 95 | X9330Y891449D01* 96 | X4518Y889132D02* 97 | X6793Y890562D01* 98 | X2618Y887232D02* 99 | X4518Y889132D01* 100 | X1188Y884957D02* 101 | X2618Y887232D01* 102 | X301Y882420D02* 103 | X1188Y884957D01* 104 | X-0Y879750D02* 105 | X301Y882420D01* 106 | X-0Y879750D02* 107 | X-0Y11750D01* 108 | X301Y9080D01* 109 | X1188Y6543D01* 110 | X2618Y4268D01* 111 | D86* 112 | X28050Y874100D02* 113 | D03* 114 | X120450Y874100D02* 115 | D03* 116 | D87* 117 | X31050Y820500D02* 118 | D03* 119 | X117450D02* 120 | D03* 121 | D88* 122 | X39500Y634250D02* 123 | D03* 124 | X529500Y177250D02* 125 | D03* 126 | D89* 127 | X139500Y663250D02* 128 | D03* 129 | D90* 130 | X528250Y845950D02* 131 | D03* 132 | X455250D02* 133 | D03* 134 | D91* 135 | X506750Y802750D02* 136 | D03* 137 | D92* 138 | X476750D02* 139 | D03* 140 | D93* 141 | X378500Y650250D02* 142 | D03* 143 | X190500D02* 144 | D03* 145 | D94* 146 | X213580Y768750D02* 147 | D03* 148 | Y801250D02* 149 | D03* 150 | X66750Y837250D02* 151 | D03* 152 | X84250Y822250D02* 153 | D03* 154 | X71750Y823750D02* 155 | D03* 156 | X79250Y817750D02* 157 | D03* 158 | X365750Y832750D02* 159 | D03* 160 | Y626250D02* 161 | D03* 162 | X353250Y832750D02* 163 | D03* 164 | X353140Y630314D02* 165 | D03* 166 | X340750Y832750D02* 167 | D03* 168 | Y634750D02* 169 | D03* 170 | X328250Y832750D02* 171 | D03* 172 | X336750Y638750D02* 173 | D03* 174 | X198250Y832750D02* 175 | D03* 176 | X203750D02* 177 | D03* 178 | X232080Y669750D02* 179 | D03* 180 | Y664250D02* 181 | D03* 182 | X229250Y832750D02* 183 | D03* 184 | X222750D02* 185 | D03* 186 | X241250Y638750D02* 187 | D03* 188 | X247750D02* 189 | D03* 190 | M02* 191 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.GP2: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,22.4.2 (48)* 3 | G04* 4 | G04 Layer_Physical_Order=3* 5 | G04 Layer_Color=128* 6 | %FSLAX44Y44*% 7 | %MOMM*% 8 | G71* 9 | G04* 10 | G04 #@! TF.SameCoordinates,A2904C07-0F36-4402-9195-DF30BD9EA298* 11 | G04* 12 | G04* 13 | G04 #@! TF.FilePolarity,Negative* 14 | G04* 15 | G01* 16 | G75* 17 | %ADD85C,0.6000*% 18 | %AMTHOVALD86* 19 | 21,1,1.4000,1.4160,0,0,90.0* 20 | 1,1,1.4160,0.0000,-0.7000* 21 | 1,1,1.4160,0.0000,0.7000* 22 | 21,0,1.4000,0.9080,0,0,90.0* 23 | 1,0,0.9080,0.0000,-0.7000* 24 | 1,0,0.9080,0.0000,0.7000* 25 | 4,0,4,0.0898,-0.6102,0.5904,-1.1108,0.4108,-1.2904,-0.0898,-0.7898,0.0898,-0.6102,0.0* 26 | 4,0,4,0.0898,0.7898,-0.4108,1.2904,-0.5904,1.1108,-0.0898,0.6102,0.0898,0.7898,0.0* 27 | 4,0,4,0.0898,-0.7898,-0.4108,-1.2904,-0.5904,-1.1108,-0.0898,-0.6102,0.0898,-0.7898,0.0* 28 | 4,0,4,0.0898,0.6102,0.5904,1.1108,0.4108,1.2904,-0.0898,0.7898,0.0898,0.6102,0.0* 29 | % 30 | %ADD86THOVALD86*% 31 | 32 | %AMTHOVALD87* 33 | 21,1,1.0000,1.4160,0,0,90.0* 34 | 1,1,1.4160,0.0000,-0.5000* 35 | 1,1,1.4160,0.0000,0.5000* 36 | 21,0,1.0000,0.9080,0,0,90.0* 37 | 1,0,0.9080,0.0000,-0.5000* 38 | 1,0,0.9080,0.0000,0.5000* 39 | 4,0,4,0.0898,-0.4102,0.5904,-0.9108,0.4108,-1.0904,-0.0898,-0.5898,0.0898,-0.4102,0.0* 40 | 4,0,4,0.0898,0.5898,-0.4108,1.0904,-0.5904,0.9108,-0.0898,0.4102,0.0898,0.5898,0.0* 41 | 4,0,4,0.0898,-0.5898,-0.4108,-1.0904,-0.5904,-0.9108,-0.0898,-0.4102,0.0898,-0.5898,0.0* 42 | 4,0,4,0.0898,0.4102,0.5904,0.9108,0.4108,1.0904,-0.0898,0.5898,0.0898,0.4102,0.0* 43 | % 44 | %ADD87THOVALD87*% 45 | 46 | %ADD88C,3.5000*% 47 | %ADD89C,3.3000*% 48 | G04:AMPARAMS|DCode=90|XSize=3.426mm|YSize=3.426mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 49 | %AMTHD90* 50 | 7,0,0,3.4260,2.9180,0.2540,45* 51 | % 52 | %ADD90THD90*% 53 | %ADD91C,1.3600*% 54 | G04:AMPARAMS|DCode=92|XSize=2.076mm|YSize=2.076mm|CornerRadius=0mm|HoleSize=0mm|Usage=FLASHONLY|Rotation=0.000|XOffset=0mm|YOffset=0mm|HoleType=Round|Shape=Relief|Width=0.254mm|Gap=0.254mm|Entries=4|* 55 | %AMTHD92* 56 | 7,0,0,2.0760,1.5680,0.2540,45* 57 | % 58 | %ADD92THD92*% 59 | %ADD93C,1.7500*% 60 | %ADD94C,0.5000*% 61 | D85* 62 | X2618Y4268D02* 63 | X4518Y2368D01* 64 | X6793Y938D01* 65 | X9330Y51D01* 66 | X12000Y-250D01* 67 | X557500D01* 68 | X560170Y51D01* 69 | X562707Y938D01* 70 | X564982Y2368D01* 71 | X566882Y4268D01* 72 | X568312Y6543D01* 73 | X569199Y9080D01* 74 | X569500Y11750D01* 75 | X569500Y879750D01* 76 | X569199Y882420D02* 77 | X569500Y879750D01* 78 | X568312Y884957D02* 79 | X569199Y882420D01* 80 | X566882Y887232D02* 81 | X568312Y884957D01* 82 | X564982Y889132D02* 83 | X566882Y887232D01* 84 | X562707Y890562D02* 85 | X564982Y889132D01* 86 | X560170Y891449D02* 87 | X562707Y890562D01* 88 | X557500Y891750D02* 89 | X560170Y891449D01* 90 | X12000Y891750D02* 91 | X557500D01* 92 | X9330Y891449D02* 93 | X12000Y891750D01* 94 | X6793Y890562D02* 95 | X9330Y891449D01* 96 | X4518Y889132D02* 97 | X6793Y890562D01* 98 | X2618Y887232D02* 99 | X4518Y889132D01* 100 | X1188Y884957D02* 101 | X2618Y887232D01* 102 | X301Y882420D02* 103 | X1188Y884957D01* 104 | X-0Y879750D02* 105 | X301Y882420D01* 106 | X-0Y879750D02* 107 | X-0Y11750D01* 108 | X301Y9080D01* 109 | X1188Y6543D01* 110 | X2618Y4268D01* 111 | D86* 112 | X28050Y874100D02* 113 | D03* 114 | X120450Y874100D02* 115 | D03* 116 | D87* 117 | X31050Y820500D02* 118 | D03* 119 | X117450D02* 120 | D03* 121 | D88* 122 | X39500Y634250D02* 123 | D03* 124 | X529500Y177250D02* 125 | D03* 126 | D89* 127 | X139500Y663250D02* 128 | D03* 129 | D90* 130 | X528250Y845950D02* 131 | D03* 132 | X455250D02* 133 | D03* 134 | D91* 135 | X506750Y802750D02* 136 | D03* 137 | D92* 138 | X476750D02* 139 | D03* 140 | D93* 141 | X378500Y650250D02* 142 | D03* 143 | X190500D02* 144 | D03* 145 | D94* 146 | X213580Y768750D02* 147 | D03* 148 | Y801250D02* 149 | D03* 150 | X66750Y837250D02* 151 | D03* 152 | X84250Y822250D02* 153 | D03* 154 | X71750Y823750D02* 155 | D03* 156 | X79250Y817750D02* 157 | D03* 158 | X365750Y832750D02* 159 | D03* 160 | Y626250D02* 161 | D03* 162 | X353250Y832750D02* 163 | D03* 164 | X353140Y630314D02* 165 | D03* 166 | X340750Y832750D02* 167 | D03* 168 | Y634750D02* 169 | D03* 170 | X328250Y832750D02* 171 | D03* 172 | X336750Y638750D02* 173 | D03* 174 | X198250Y832750D02* 175 | D03* 176 | X203750D02* 177 | D03* 178 | X232080Y669750D02* 179 | D03* 180 | Y664250D02* 181 | D03* 182 | X229250Y832750D02* 183 | D03* 184 | X222750D02* 185 | D03* 186 | X241250Y638750D02* 187 | D03* 188 | X247750D02* 189 | D03* 190 | M02* 191 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.REP: -------------------------------------------------------------------------------- 1 | ************************************************************* 2 | FileName = 830-00011 Microhard Module Breakout Board.GBR 3 | AutoAperture = True 4 | ************************************************************* 5 | Generating : Top Layer 6 | File : 830-00011 Microhard Module Breakout Board.GTL 7 | 8 | Adding Layer : Top Layer 9 | 10 | Adding Layer : Multi-Layer 11 | 12 | 13 | Used DCodes : 14 | D12 15 | D14 16 | D15 17 | D18 18 | D19 19 | D20 20 | D21 21 | D22 22 | D23 23 | D24 24 | D25 25 | D26 26 | D27 27 | D28 28 | D29 29 | D30 30 | D31 31 | D32 32 | D33 33 | D34 34 | D35 35 | D36 36 | D37 37 | D38 38 | D67 39 | D68 40 | D69 41 | D70 42 | D71 43 | D72 44 | D73 45 | D74 46 | D75 47 | D76 48 | D77 49 | D78 50 | D79 51 | D80 52 | D81 53 | D82 54 | D83 55 | D84 56 | ************************************************************* 57 | 58 | ************************************************************* 59 | Generating : Int1 (GND) 60 | File : 830-00011 Microhard Module Breakout Board.GP1 61 | 62 | Adding Layer : Int1 (GND) 63 | 64 | Adding Layer : Multi-Layer 65 | 66 | 67 | Used DCodes : 68 | D85 69 | D86 70 | D87 71 | D88 72 | D89 73 | D90 74 | D91 75 | D92 76 | D93 77 | D94 78 | ************************************************************* 79 | 80 | ************************************************************* 81 | Generating : Int2 (GND) 82 | File : 830-00011 Microhard Module Breakout Board.GP2 83 | 84 | Adding Layer : Int2 (GND) 85 | 86 | Adding Layer : Multi-Layer 87 | 88 | 89 | Used DCodes : 90 | D85 91 | D86 92 | D87 93 | D88 94 | D89 95 | D90 96 | D91 97 | D92 98 | D93 99 | D94 100 | ************************************************************* 101 | 102 | ************************************************************* 103 | Generating : Bottom Layer 104 | File : 830-00011 Microhard Module Breakout Board.GBL 105 | 106 | Adding Layer : Bottom Layer 107 | 108 | Adding Layer : Multi-Layer 109 | 110 | 111 | Used DCodes : 112 | D14 113 | D68 114 | D69 115 | D76 116 | D77 117 | D78 118 | D79 119 | D80 120 | D81 121 | D82 122 | D83 123 | D84 124 | D95 125 | ************************************************************* 126 | 127 | ************************************************************* 128 | Generating : Bottom Overlay 129 | File : 830-00011 Microhard Module Breakout Board.GBO 130 | 131 | Adding Layer : Bottom Overlay 132 | 133 | 134 | Used DCodes : 135 | D96 136 | D97 137 | ************************************************************* 138 | 139 | ************************************************************* 140 | Generating : Outline 141 | File : 830-00011 Microhard Module Breakout Board.GM1 142 | 143 | Adding Layer : Outline 144 | 145 | 146 | Used DCodes : 147 | D13 148 | ************************************************************* 149 | 150 | ************************************************************* 151 | Generating : Dimensions 152 | File : 830-00011 Microhard Module Breakout Board.GM2 153 | 154 | Adding Layer : Dimensions 155 | 156 | 157 | Used DCodes : 158 | D98 159 | D99 160 | ************************************************************* 161 | 162 | ************************************************************* 163 | Generating : Top Overlay 164 | File : 830-00011 Microhard Module Breakout Board.GTO 165 | 166 | Adding Layer : Top Overlay 167 | 168 | 169 | Used DCodes : 170 | D10 171 | D11 172 | D12 173 | D13 174 | D14 175 | D15 176 | D16 177 | ************************************************************* 178 | 179 | ************************************************************* 180 | Generating : Top Paste 181 | File : 830-00011 Microhard Module Breakout Board.GTP 182 | 183 | Adding Layer : Top Paste 184 | 185 | Adding Layer : Top Layer 186 | 187 | Adding Layer : Multi-Layer 188 | 189 | 190 | Used DCodes : 191 | D17 192 | D18 193 | D19 194 | D20 195 | D21 196 | D22 197 | D23 198 | D24 199 | D25 200 | D26 201 | D27 202 | D28 203 | D29 204 | D30 205 | D31 206 | D32 207 | D33 208 | D34 209 | D35 210 | D36 211 | D37 212 | D38 213 | ************************************************************* 214 | 215 | ************************************************************* 216 | Generating : Top Solder 217 | File : 830-00011 Microhard Module Breakout Board.GTS 218 | 219 | Adding Layer : Top Solder 220 | 221 | Adding Layer : Top Layer 222 | 223 | Adding Layer : Multi-Layer 224 | 225 | 226 | Used DCodes : 227 | D29 228 | D39 229 | D40 230 | D41 231 | D42 232 | D43 233 | D44 234 | D45 235 | D46 236 | D47 237 | D48 238 | D49 239 | D50 240 | D51 241 | D52 242 | D53 243 | D54 244 | D55 245 | D56 246 | D57 247 | D58 248 | D59 249 | D60 250 | D61 251 | D62 252 | D63 253 | D64 254 | D65 255 | D66 256 | ************************************************************* 257 | 258 | ************************************************************* 259 | Generating : Bottom Solder 260 | File : 830-00011 Microhard Module Breakout Board.GBS 261 | 262 | Adding Layer : Bottom Solder 263 | 264 | Adding Layer : Bottom Layer 265 | 266 | Adding Layer : Multi-Layer 267 | 268 | 269 | Used DCodes : 270 | D59 271 | D60 272 | D61 273 | D62 274 | D63 275 | D64 276 | D65 277 | D66 278 | ************************************************************* 279 | 280 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.RUL: -------------------------------------------------------------------------------- 1 | DRC Rules Export File for PCB: C:\Users\chris\AppData\Local\TempReleases\Snapshot\1\830-00011 Microhard Module Breakout Board.PcbDoc 2 | RuleKind=MinimumAnnularRing|RuleName=MinimumAnnularRing|Scope=Board|Minimum=3.94 3 | RuleKind=Clearance|RuleName=Clearance_ETH_TX|Scope=Board|Minimum=29.53 4 | RuleKind=Clearance|RuleName=Clearance_ETH_RX|Scope=Board|Minimum=29.53 5 | RuleKind=Clearance|RuleName=Clearance_USB|Scope=Board|Minimum=23.62 6 | RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97 7 | RuleKind=Width|RuleName=Width|Scope=Board|Minimum=5.91 8 | RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=5.91 9 | RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0 10 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Gerber/830-00011 Microhard Module Breakout Board.apr: -------------------------------------------------------------------------------- 1 | D10 ROUNDED 3.937 3.937 0.000 LINE 0.000 2 | D11 ROUNDED 9.842 9.842 0.000 LINE 0.000 3 | D12 ROUNDED 11.811 11.811 0.000 LINE 0.000 4 | D13 ROUNDED 7.874 7.874 0.000 LINE 0.000 5 | D14 ROUNDED 5.906 5.906 0.000 LINE 0.000 6 | D15 ROUNDED 15.748 15.748 0.000 LINE 0.000 7 | D16 ROUNDED 4.724 4.724 0.000 LINE 0.000 8 | D17 ROUNDED 43.307 82.677 0.000 FLASH 180.000 9 | D18 ROUNDED 43.307 141.732 0.000 FLASH 180.000 10 | D19 RECTANGULAR 35.433 27.559 0.000 FLASH 0.000 11 | D20 RECTANGULAR 11.811 27.559 0.000 FLASH 0.000 12 | D21 RECTANGULAR 15.748 13.780 0.000 FLASH 0.000 13 | D22 RECTANGULAR 19.685 15.748 0.000 FLASH 90.000 14 | D23 RECTANGULAR 36.221 11.220 0.000 FLASH 90.000 15 | D24 RECTANGULAR 62.992 41.339 0.000 FLASH 90.000 16 | D26 RECTANGULAR 18.898 15.748 0.000 FLASH 90.000 17 | D29 ROUNDED 13.780 13.780 0.000 FLASH 0.000 18 | D33 RECTANGULAR 84.646 96.457 0.000 FLASH 90.000 19 | D35 RECTANGULAR 57.087 124.016 0.000 FLASH 90.000 20 | D38 RECTANGULAR 19.685 43.307 0.000 FLASH 0.000 21 | D39 ROUNDED 47.244 145.669 0.000 FLASH 180.000 22 | D40 RECTANGULAR 39.370 31.496 0.000 FLASH 0.000 23 | D41 RECTANGULAR 15.748 31.496 0.000 FLASH 0.000 24 | D42 RECTANGULAR 19.685 17.716 0.000 FLASH 0.000 25 | D43 RECTANGULAR 23.622 19.685 0.000 FLASH 90.000 26 | D44 RECTANGULAR 40.157 15.158 0.000 FLASH 90.000 27 | D45 RECTANGULAR 66.929 45.276 0.000 FLASH 90.000 28 | D47 RECTANGULAR 22.835 19.685 0.000 FLASH 90.000 29 | D53 RECTANGULAR 88.583 100.394 0.000 FLASH 90.000 30 | D55 RECTANGULAR 61.024 127.953 0.000 FLASH 90.000 31 | D58 RECTANGULAR 23.622 47.244 0.000 FLASH 0.000 32 | D59 ROUNDED 106.299 47.244 0.000 FLASH 90.000 33 | D60 ROUNDED 86.614 47.244 0.000 FLASH 90.000 34 | D61 ROUNDED 114.173 114.173 0.000 FLASH 0.000 35 | D62 ROUNDED 122.047 122.047 0.000 FLASH 0.000 36 | D63 ROUNDED 141.732 141.732 0.000 FLASH 0.000 37 | D64 ROUNDED 66.535 66.535 0.000 FLASH 0.000 38 | D65 RECTANGULAR 66.535 66.535 0.000 FLASH 0.000 39 | D66 ROUNDED 61.024 61.024 0.000 FLASH 0.000 40 | D67 ROUNDED 19.685 19.685 0.000 LINE 0.000 41 | D68 ROUNDED 6.890 6.890 0.000 LINE 0.000 42 | D69 ROUNDED 6.575 6.575 0.000 LINE 0.000 43 | D70 ROUNDED 59.055 59.055 0.000 LINE 0.000 44 | D71 RECTANGULAR 74.803 47.244 0.000 FLASH 0.000 45 | D72 RECTANGULAR 33.465 102.362 0.000 FLASH 0.000 46 | D73 RECTANGULAR 114.173 137.795 0.000 FLASH 0.000 47 | D74 RECTANGULAR 84.646 49.213 0.000 FLASH 0.000 48 | D75 RECTANGULAR 78.740 47.244 0.000 FLASH 0.000 49 | D76 ROUNDED 102.362 43.307 0.000 FLASH 90.000 50 | D77 ROUNDED 82.677 43.307 0.000 FLASH 90.000 51 | D78 ROUNDED 110.236 110.236 0.000 FLASH 0.000 52 | D79 ROUNDED 118.110 118.110 0.000 FLASH 0.000 53 | D80 ROUNDED 137.795 137.795 0.000 FLASH 0.000 54 | D81 ROUNDED 62.598 62.598 0.000 FLASH 0.000 55 | D82 RECTANGULAR 62.598 62.598 0.000 FLASH 0.000 56 | D83 ROUNDED 57.087 57.087 0.000 FLASH 0.000 57 | D84 ROUNDED 15.748 15.748 0.000 FLASH 0.000 58 | D85 ROUNDED 23.622 23.622 0.000 LINE 0.000 59 | D88 ROUNDED 137.795 137.795 0.000 FLASH 0.000 60 | D89 ROUNDED 129.921 129.921 0.000 FLASH 0.000 61 | D90 RELIEF 134.882 134.882 0.000 FLASH 10.000 10.000 4 0.000 62 | D91 ROUNDED 53.543 53.543 0.000 FLASH 0.000 63 | D92 RELIEF 81.732 81.732 0.000 FLASH 10.000 10.000 4 0.000 64 | D93 ROUNDED 68.898 68.898 0.000 FLASH 0.000 65 | D94 ROUNDED 19.685 19.685 0.000 FLASH 0.000 66 | D95 RECTANGULAR 131.890 64.961 0.000 FLASH 0.000 67 | D96 ROUNDED 1.000 1.000 0.000 LINE 0.000 68 | D97 RECTANGULAR 303.150 51.181 0.000 FLASH 0.000 69 | D98 ROUNDED 10.000 10.000 0.000 LINE 0.000 70 | D99 ROUNDED 6.000 6.000 0.000 LINE 0.000 71 | -------------------------------------------------------------------------------- /PRI_Breakout/PCBA-830-00011 Microhard Module Breakout Board-[NO VARIATIONS]-1.0.0/PCB and PCBA Files/Pick Place/Pick Place for 830-00011 Microhard Module Breakout Board.txt: -------------------------------------------------------------------------------- 1 | Altium Designer Pick and Place Locations 2 | C:\Users\chris\AppData\Local\TempReleases\Snapshot\1\Assembly\PCB and PCBA Files\Pick Place\Pick Place for 830-00011 Microhard Module Breakout Board.txt 3 | 4 | ======================================================================================================================== 5 | File Design Information: 6 | 7 | Date: 03.05.22 8 | Time: 10:58 9 | Revision: Not in VersionControl 10 | Variant: No variations 11 | Units used: mm 12 | 13 | Designator Comment Layer Footprint Center-X(mm) Center-Y(mm) Rotation Description 14 | R7 "17.4K / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 24.4750 76.8750 180 "RES SMD 17.4K OHM 1% 1/16W 0402" 15 | R6 "1.2M / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 42.4250 81.6750 270 "Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 1200000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402" 16 | R5 "1.8M / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 41.5750 81.6750 90 "RES SMD 1.8M OHM 1% 1/16W 0402" 17 | Q1 DMP4047LFDE-7 TopLayer DMP2066UFDE7 37.9750 82.0250 0 "MOSFET P-CH 40V 3.3A 6UDFN" 18 | D3 RB521S30T1G TopLayer ONSC-SOD-523-2-502-01_V 40.6250 81.6750 270 "Rectifier Diode, Schottky, 1 Phase, 1 Element, 0.2A, 30V V(RRM), Silicon" 19 | C4 "1uF / 0402 / 10% / 35V / X5R" TopLayer CAPC0402(1005)60_L 39.6250 81.6250 90 "CAP CER 1UF 35V X5R 0402" 20 | U1 LTM8074EY#PBF TopLayer FP-BGA-25-05-08-1566-MFG 24.9000 79.7250 270 "Switching Regulator, Current-mode, 2200kHz Switching Freq-Max, PBGA25" 21 | R4 "47K / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 24.7500 82.6250 180 "Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 47000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402" 22 | R3 "23.7K / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 26.1000 76.8750 180 "RES 23.7K OHM 1% 1/16W 0402" 23 | R2 "7.5K / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 22.7750 76.8750 180 "RES 7.5K OHM 1% 1/16W 0402" 24 | R1 "5.1K / 0402 / 1% / 0.063W / 100PPM/K" TopLayer RESC0402(1005)_L 9.4250 79.6750 0 "Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 5100ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402" 25 | J6 BM02B-GHS-TBT TopLayer JST-BM02B-GHS-TBT_V 16.9750 79.6250 180 "Disconnectable Crimp Style Connector, Pitch 1.25 mm, 1 x 2 Position, Height 4.05 mm, -25 to 85 degC, RoHS, Tape and Reel" 26 | J5 ERM8-020-02.0-L-DV-P-TR TopLayer FP-ERM8-020-02_0-L-DV-TR-MFG 28.4500 66.5250 0 "Board Stacking Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.8mm Pitch, Surface Mount Terminal, Black Insulator" 27 | J4 0436500205 TopLayer SHDRRA2W64P300_2X1_965X990H437 49.1750 82.4350 0 "CONN MALE HEADER R/A 2POS 3MM" 28 | J3 SM06B-GHS-TB TopLayer JST-SM06B-GHS-TB_V 34.6750 85.9250 180 "JST GH Series Connector, Pitch 1.25 mm, 1 x 6 Position, Right Angle, Height 4.35 mm, -25 to 85 degC, RoHS, Tape and Reel" 29 | J2 SM04B-GHS-TB TopLayer JST-SM04B-GHS-TB 21.3500 85.9250 180 "4 Positions Header Connector 1.25mm SMD Right Angle" 30 | J1 2012670005 TopLayer 2012670005 7.4250 84.3250 180 "USB Connector, 24 Contact(s), Female, Right Angle, Surface Mount Terminal, Locking, Receptacle" 31 | F2 C2Q300 TopLayer RESC0603(1608)_L 20.4250 81.9250 180 "Electric Fuse, Very Fast Blow, 0.3A, 32VAC, 63VDC, 35A (IR), Surface Mount, 0603" 32 | F1 SF-0603S040-2 TopLayer RESC0603(1608)_L 47.0750 78.3250 180 "Electric Fuse, Slow Blow, 0.4A, 35VAC, 50VDC, 50A (IR), Surface Mount, 0603" 33 | D1 1.5SMBJ30A TopLayer JCET-SMB-2_N 40.6750 78.5250 0 "TVS Diode Single Uni-Dir 30V 1.5KW 2-Pin SMB T/R" 34 | C3 "10uF / 0805 / 20% / 16V / X7R" TopLayer CAPC0805(2012)145_L 21.4750 79.8700 90 "CAP CER 10UF 16V X7R 0805" 35 | C2 "1uF / 0603 / 10% / 50V / X5R" TopLayer CAPC0603(1608)100_L 27.9700 79.0750 90 "CAP CER 1UF 50V X5R 0603" 36 | C1 UCM1V151MCL1GS TopLayer CAPAE6866X82L 32.7250 79.9250 0 "CAP ALUM 150UF 20% 35V SMD" 37 | -------------------------------------------------------------------------------- /PRI_Breakout/README.md: -------------------------------------------------------------------------------- 1 | # Pixhawk Radio Interface (PRI) Breakout Board 2 | 3 | > **General information about Pixhawk designs, schematics, reference hardware, FMU versions, licensing, and trademarks, and contributing to the project can be found in the repo [README](../README.md).** 4 | 5 | This folder contains the design files for the PRI breakout board which splits the PRI connector into a power in, ethernet, usb and serial port. Documentation about the PRI standard can be found [here](https://github.com/pixhawk/Pixhawk-Standards). 6 | 7 | ## Design Files 8 | 9 | The design is provided in [Altium Designer](https://www.altium.com/) CAD files. 10 | 11 | It consists of schematic files (*.SchDoc), BOM listings, and includes open reference hardware PCB layouts (.PrjPcb). 12 | 13 | > **Tip** PDF versions of the schematics and PCB layouts has been made available for easy previewing (i.e. if you don't have Altium Designer). 14 | 15 | 16 | ## Licensing and Trademarks 17 | 18 | The PRI breakout board design files are contributed by Auterion AG and licensed under [CC BY-SA 3](https://creativecommons.org/licenses/by-sa/3.0/legalcode). 19 | 20 | The license allows you to use, sell, share, modify and build on the files in almost any way you like - provided that you give credit/attribution, and that you share any changes that you make under the same open source license (see the [human readable version of the license](https://creativecommons.org/licenses/by-sa/3.0/) for a concise summary of the rights and obligations). 21 | 22 | 23 | -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/.SpecialStrings: -------------------------------------------------------------------------------- 1 | {"Parameters":[{"ComputerName":"A365"},{"Application_BuildNumber":"22.4.2.48"},{"Item":"SRC-830-00011 Microhard Module Breakout Board"},{"ItemRevision":"1.0.0"},{"ItemAndRevision":"SRC-830-00011 Microhard Module Breakout Board-1.0.0"},{"ItemRevisionBase":"0"},{"ItemRevisionLevel1":"0"},{"ItemRevisionLevel2":"1"},{"ItemRevisionLevel1AndBase":"0.0"},{"ItemRevisionLevel2AndLevel1":"1.0"},{"VersionControl_PrjFolderRevNumber":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_ProjFolderRevNumber":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board.SchDoc":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board.PcbDoc":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board Assembly.PCBDwf":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board PCB Fab.PCBDwf":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board.BomDoc":"d9c0c1f4f323f0c196af3e1c2dcc1e7136ebd956"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board.OutJob":"ecaf4260a9f58f91871d8575123e4815a139fdd8"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board Assembly.OutJob":"ecaf4260a9f58f91871d8575123e4815a139fdd8"},{"VersionControl_RevNumber_830-00011 Microhard Module Breakout Board PCB Fab.OutJob":"122809c2ac954812ab5480a9c387a5ade5313e35"}]} -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board Assembly.PCBDwf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board Assembly.PCBDwf -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board PCB Fab.PCBDwf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board PCB Fab.PCBDwf -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.BomDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.BomDoc -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.PcbDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.PcbDoc -------------------------------------------------------------------------------- /PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PRI_Breakout/SRC-830-00011 Microhard Module Breakout Board-1.0.0/830-00011 Microhard Module Breakout Board.SchDoc -------------------------------------------------------------------------------- /PSMv3_REV_C/BOM/Bill of Materials-PSM_REV_C(PCA_0007_PSM).xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/BOM/Bill of Materials-PSM_REV_C(PCA_0007_PSM).xlsx -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PCA_0007_PSM_REV_C.~(1).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PCA_0007_PSM_REV_C.~(1).PrjPcb.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PCA_0007_PSM_REV_C.~(2).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PCA_0007_PSM_REV_C.~(2).PrjPcb.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PSM.~(1).OutJob.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PSM.~(1).OutJob.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PSM_REV_C.~(1).PcbDoc.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PSM_REV_C.~(1).PcbDoc.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PSM_REV_C.~(1).PcbLib.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PSM_REV_C.~(1).PcbLib.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PSM_REV_C.~(1).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PSM_REV_C.~(1).PrjPcb.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/History/PSM_REV_C.~(2).PrjPcb.Zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/History/PSM_REV_C.~(2).PrjPcb.Zip -------------------------------------------------------------------------------- /PSMv3_REV_C/PCB 3D Print/PCB 3D Print from Above.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PCB 3D Print/PCB 3D Print from Above.PDF -------------------------------------------------------------------------------- /PSMv3_REV_C/PCB 3D Print/PCB 3D Print from below.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PCB 3D Print/PCB 3D Print from below.PDF -------------------------------------------------------------------------------- /PSMv3_REV_C/PCB Print/Assembly.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PCB Print/Assembly.PDF -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_REV_C.Dat: -------------------------------------------------------------------------------- 1 | Field=3DR_PARTNO~String~3DR_PARTNO~55|Field=Comment~String~Comment~55|Field=Description~String~Description~55|Field=Designator~String~Designator~55|Field=Footprint~String~Footprint~55|Field=LibRef~String~LibRef~55|Field=Manufacturer 1~String~Manufacturer 1~55|Field=Manufacturer Part Number 1~String~Manufacturer Part Number 1~55|Field=Quantity~Integer~Quantity~55|Field=Supplier 1~String~Supplier 1~55|Field=Supplier Currency 1~String~Supplier Currency 1~55|Field=Supplier Order Qty 1~Integer~Supplier Order Qty 1~55|Field=Supplier Part Number 1~String~Supplier Part Number 1~83|Field=Supplier Stock 1~Integer~Supplier Stock 1~21|Field=Supplier Subtotal 1~Float~Supplier Subtotal 1~109|Field=Supplier Unit Price 1~Float~Supplier Unit Price 1~45|Field=Value~String~Value~20|ReportField=Currency~USD|ReportField=ProductionQuantity~5000|ReportField=ProjectFileName~PSM_REV_C.PrjPcb|ReportField=ProjectFullPath~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\PSMv3_REV_C\PSM_REV_C.PrjPcb|ReportField=Title~PCH Bill of Materials For Variant [PCA_0007_PSM] of Project [PSM_REV_C.PrjPcb] (No PCB Document Selected)|ReportField=TotalQuantity~61|ReportField=ReportTime~1:33:52 PM|ReportField=ReportDate~4/06/2015|ReportField=ReportDateTime~4/06/2015 1:33:52 PM|ReportField=OutputName~PCH Bill of Materials|ReportField=OutputType~BOM_PartType|ReportField=GeneratorName~BOM|ReportField=GeneratorDescription~Bill of Materials|ReportField=VariantName~PCA_0007_PSM|ReportField=Address1~|ReportField=Address2~|ReportField=Address3~|ReportField=Address4~|ReportField=Application_BuildNumber~|ReportField=ApprovedBy~|ReportField=Author~|ReportField=CheckedBy~|ReportField=CompanyName~|ReportField=CurrentDate~4/06/2015|ReportField=CurrentTime~1:27:39 PM|ReportField=Date~30/04/2014 10:20:37 AM|ReportField=DocumentFullPathAndName~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\PSMv3_REV_C\PSM_components_REV_C.SchDoc|ReportField=DocumentName~PSM_components_REV_C.SchDoc|ReportField=DocumentNumber~|ReportField=DrawnBy~|ReportField=Engineer~|ReportField=ImagePath~|ReportField=ModifiedDate~4/06/2015|ReportField=Organization~|ReportField=ProjectName~PSM_REV_C.PrjPcb|ReportField=Revision~|ReportField=Rule~|ReportField=SheetNumber~Sheet:|ReportField=SheetTotal~|ReportField=Time~|ReportField=Title~power.sch|ReportField=DataSourceFileName~PSM_REV_C.PrjPcb|ReportField=DataSourceFullPath~F:\Current_Work\00_0_git\Pixhawk_OS_Hardware\PSMv3_REV_C\PSM_REV_C.PrjPcb 2 | ECM0711|10n|CAP CER 10000PF 16V 10% X7R 0402|C1|0402-CAP|CAP0402|Yageo|CC0402KRX7R7BB103|1|Digi-Key|USD|5000|311-1042-1-ND|2199337|14.49747|0.0029|10N 3 | ECM0714|10u/25V|CAP CER 10UF 25V 10% X5R 0805|C2|0805-CAP|CAP0805|Samsung Electro-Mechanics America, Inc|CL21A106KAYNNNE|1|Digi-Key|USD|5000|1276-2891-1-ND|345851|332.23688|0.06645|10UF 4 | ECM0705|1u|CAP CER 1UF 16V Y5V 0603|C3, C7|0603-CAP|CAP0603|Yageo|CC0603ZRY5V7BB105|2|Digi-Key|USD|10000|311-1372-1-ND|357267|87.45121|0.00875|1U 5 | ECM0712|10u|CAP CER 10UF 10V 10% X5R 0603|C4, C401, C402|0603-CAP|CAP0603|TDK Corporation|C1608X5R1A106K080AC|3|Digi-Key|USD|15000|445-7486-1-ND|315754|2286.20794|0.15241|10U 6 | ECM0700|0u1|CAP CER 0.1UF 16V Y5V 0402|C5|0402-CAP|CAP0402|Yageo|CC0402ZRY5V7BB104|1|Digi-Key|USD|5000|311-1047-1-ND|2704025|14.06993|0.00281|0U1 7 | ECM0704|0u47|CAP CER 0.47UF 16V 10% X5R 0402|C6|0402-CAP|CAP0402|TDK Corporation|C1005X5R1C474K050BC|1|Digi-Key|USD|5000|445-4976-1-ND|847187|102.72603|0.02055|0U47 8 | ECM0535|5n6|CAP CER 5600PF 50V 10% X7R 0402|C8|0402-CAP|CAP0402|Kemet|C0402C562K5RACTU|1|Digi-Key|USD|5000|399-3073-1-ND|23645|263.55853|0.05271|5N6 9 | ECM0716|100u|CAP CER 100UF 10V 20% X5R 1206|C801, C803, C805, C810|1206-CAP|CAP1206|TDK Corporation|C3216X5R1A107M160AC|4|Digi-Key|USD|20000|445-6007-1-ND|530809|14578.77812|0.72894|100U 10 | ECM0718|10p/25V|CAP CER 10PF 25V 5% NP0 0402|C802, C804|0402-CAP|CAP0402|Kemet|C0402C100J3GACTU|2|Digi-Key|USD|10000|399-7746-1-ND|661861|35.52463|0.00355|10P 11 | ECM0717|1000p/25V|CAP CER 1000PF 25V 5% NP0 0402|C806|0402-CAP|CAP0402|Murata Electronics North America|GRM1555C1E102JA01D|1|Digi-Key|USD|5000|490-6169-1-ND|3341|102.14302|0.02043|1000P 12 | ECM0701|0u1 25v|CAP CER 0.1UF 25V 10% X7R 0402|C807, C808, C809|0402-CAP|CAP0402|TDK Corporation|C1005X7R1E104K050BB|3|Digi-Key|USD|15000|445-7348-1-ND|2028149|289.87162|0.01932|0U1 13 | ECM0838|PMEG2005CT|DIODE SCHOTTKY 20V 500MA TO236AB|D1, D3|SOT23-3|PMEG2005CT|NXP Semiconductors|PMEG2005CT,215|2|Digi-Key|USD|10000|568-6500-1-ND|50788|1151.71306|0.11517|20V 14 | ECM0536|MMSZ5232BT1G|DIODE ZENER 5.6V 500MW SOD123|D4|SOD-123|DIODESOD-123|ON Semiconductor|MMSZ5232BT1G|1|Digi-Key|USD|5000|MMSZ5232BT1GOSCT-ND|36923|251.27649|0.05026|5.6V 15 | ECM0802|0ZCA0035FF2G|PTC RESTTBLE 0.35A 16V CHIP 1206|F1, F3|PTC-1206|PTCSMD|Bel Fuse Inc|0ZCA0035FF2G|2|Digi-Key|USD|10000|507-1479-1-ND|77434|1315.42173|0.13154|0.35A 16 | ECM0537|0ZCA0020FF2E|PTC RESTTBLE 0.20A 30V CHIP 1206|F4|PTC-1206|PTCSMD|Bel Fuse Inc|0ZCA0020FF2E|1|Digi-Key|USD|5000|507-1478-1-ND|96180|657.71086|0.13154|0.2A 17 | ECM0814|47uH|FIXED IND 47UH 170MA 4.81 OHM|L1|0805-IND|INDUCTOR0805|TDK Corporation|MLZ2012M470WTD25|1|Digi-Key|USD|5000|445-17079-1-ND|2550|466.63968|0.09333|47UH 18 | ECM0719|Kyocera KNH16C104DA5TS EMI filter|FILTER CAP 0.1UF 2A 25V 0603|L603|KYOCERA-KNH16-DA|KNH16C104DA5TS|AVX Corp/Kyocera Corp|KNH16C104DA5TS|1|Digi-Key|USD|5000|478-6878-1-ND|309493|508.03325|0.10161|0U1 19 | PCB0008|PCB0008|PCB0008|PCB0008||PCB_0008|||1||||||||PCB0008 20 | ECM0539|MMBT3906*SMD|TRANS SS PNP 40V 300MW SOT23|Q5001|SOT23-BEC|MMBT3906*SMD|Micro Commercial Co|MMBT3906-TP|1|Digi-Key|USD|5000|MMBT3906-TPCT-ND|14063|153.56433|0.03071|40V 21 | ECM0822|453K|RES 453K OHM 1/16W 1% 0402|R1, R801, R804, R807|0402-RES|RESISTOR0402-RES|Stackpole Electronics Inc|RMCF0402FT453K|4|Digi-Key|USD|20000|RMCF0402FT453KCT-ND|106621|59.70003|0.00299|453K 22 | ECM0812|16K5|RES 16.5K OHM 1/16W 1% 0402|R2, R401, R10001|0402-RES|RESISTOR0402-RES|Stackpole Electronics Inc|RMCF0402FT16K5|3|Digi-Key|USD|15000|RMCF0402FT16K5CT-ND|138786|44.77502|0.00299|16K5 23 | ECM0818|100K|RES 100K OHM 1/16W 1% 0402 SMD|R3|0402-RES|RESISTOR0402-RES|Yageo|RC0402FR-07100KL|1|Digi-Key|USD|5000|311-100KLRCT-ND|71044|11.34922|0.00227|100K 24 | ECM0800|10K|RES 10K OHM 1/16W 1% 0402 SMD|R4, R404|0402-RES|RESISTOR0402-RES|Yageo|RC0402FR-0710KL|2|Digi-Key|USD|10000|311-10.0KLRCT-ND|10588947|22.69845|0.00227|10K 25 | ECM0540|9K09|RES 9.09K OHM 1/16W 1% 0402|R5|0402-RES|RESISTOR0402-RES|Stackpole Electronics Inc|RMCF0402FT9K09|1|Digi-Key|USD|5000|RMCF0402FT9K09CT-ND|51143|14.92501|0.00299|9K09 26 | ECM0806|1M|RES 1M OHM 1/16W 1% 0402 SMD|R402, R405|0402-RES|RESISTOR0402-RES|Yageo|RC0402FR-071ML|2|Digi-Key|USD|10000|311-1.00MLRCT-ND|2494961|22.69845|0.00227|1M 27 | ECM0813|25K5|RES 25.5K OHM 1/16W 1% 0402|R403|0402-RES|RESISTOR0402-RES|Stackpole Electronics Inc|RMCF0402FT25K5|1|Digi-Key|USD|5000|RMCF0402FT25K5CT-ND|103514|14.92501|0.00299|25K5 28 | ECM0815|56K|RES 56K OHM 1/16W .1% 0402 SMD|R802, R805, R808|0402-RES|RESISTOR0402-RES|Panasonic Electronic Components|ERA-2AEB563X|3|Digi-Key|USD|15000|P56KDCCT-ND|6327|1288.21468|0.08588|5.6K 29 | ECM0819|105K|RES 105K OHM 1/10W 1% 0402 SMD|R803, R806, R809|0402-RES|RESISTOR0402-RES|Panasonic Electronic Components|ERJ-2RKF1053X|3|Digi-Key|USD|15000|P105KLCT-ND|265762|58.88382|0.00393|105K 30 | ECM0804|1K|RES 1K OHM 1/16W 1% 0402|R5002|0402-RES|RESISTOR0402-RES|Samsung Electro-Mechanics America, Inc|RC1005F102CS|1|Digi-Key|USD|5000|1276-3430-1-ND|1089020|9.2504|0.00185|1K 31 | ECM0805|1M|RES ARRAY 1M OHM 4 RES 0804|RN801|EXB28V|4R-NEXB28V|Panasonic Electronic Components|EXB-28V105JX|1|Digi-Key|USD|5000|Y7105CT-ND|35413|84.49731|0.0169|1M 32 | ECM0832|MIC5332|IC REG LDO 3.3V 0.3A 8TMLF|U1|MLF-8-EPAD|MIC5332|Micrel Inc|MIC5332-SSYMT TR|1|Digi-Key|USD|5000|576-4110-1-ND|7430|4682.33233|0.93647|3.3V 33 | ECM0829|LT3469|IC AMP DVR W/REG 1.3MHZ TSOT23-8|U2|SOT23-8|LT3469|Linear Technology|LT3469ETS8#TRMPBF|1|Digi-Key|USD|5000|LT3469ETS8#TRMPBFCT-ND|622|18575.80387|3.71516|BUZZER 34 | ECM0541|BQ24315|IC LI+ CHARGER FRONT END 8SON|U401, U402|QFN8-DSG|BQ24315|Texas Instruments|BQ24315DSGT|2|Digi-Key|USD|10000|296-32030-1-ND|1257|10105.47362|1.01055|3.3V-30V 35 | EMC0901|MOSFET-DUAL-PCHANNEL-CHIPFET|MOSFET 2P-CH 20V 2.9A CHIPFET|U801, U802, U804|1206-8|MOSFET-DUAL-PCHANNEL-CHIPFET|ON Semiconductor|NTHD4102PT1G|3|Digi-Key|USD|15000|NTHD4102PT1GOSCT-ND|13276|2870.14884|0.19134|20V 2.9A 36 | ECM0830|LTC4417|IC OR CTRLR SRC SELECT 24QFN|U803|MO-220|LTC4117|Linear Technology|LTC4417IUF#PBF|1|Digi-Key|USD|5000|LTC4417IUF#PBF-ND|2421|24760.7424|4.95215|3:1 37 | ECM0824|BQ24313|IC LI+ CHARGER FRONT END 8-SON|U10001|QFN8-DSG|BQ24313|Texas Instruments|BQ24313DSGT|1|Digi-Key|USD|5000|296-23933-1-ND|262|5051.57079|1.01031|3.3V-30V 38 | -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_REV_C.PcbDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PSM_REV_C.PcbDoc -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_REV_C.PcbLib: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PSM_REV_C.PcbLib -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_REV_C.PrjPcbStructure: -------------------------------------------------------------------------------- 1 | Record=TopLevelDocument|FileName=PSM_components_REV_C.SchDoc 2 | -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_REV_C.SCHLIB: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PSM_REV_C.SCHLIB -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_components_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PSM_components_REV_C.SchDoc -------------------------------------------------------------------------------- /PSMv3_REV_C/PSM_footprint_REV_C.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/PSM_footprint_REV_C.SchDoc -------------------------------------------------------------------------------- /PSMv3_REV_C/Report Board Stack/Report Board Stack.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/Report Board Stack/Report Board Stack.PDF -------------------------------------------------------------------------------- /PSMv3_REV_C/Schematic Print/Schematic Prints.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/PSMv3_REV_C/Schematic Print/Schematic Prints.PDF -------------------------------------------------------------------------------- /PSMv3_REV_C/Status Report.Txt: -------------------------------------------------------------------------------- 1 | Output: PCH Bill of Materials 2 | Type : BOM 3 | From : Variant [PCA_0007_PSM] of Project [PSM_REV_C.PrjPcb] 4 | Generated File[PCH Bill of Materials-PSM_REV_C(PCA_0007_PSM).xls] 5 | 6 | 7 | Files Generated : 1 8 | Documents Printed : 0 9 | 10 | Finished Output Generation At 1:34:05 PM On 4/06/2015 11 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/01_cover_page.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/01_cover_page.SchDoc -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/02_main.SchDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/02_main.SchDoc -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/3D Models/Status Report.Txt: -------------------------------------------------------------------------------- 1 | Project Outputs Generation Report 2 | --------------------------------- 3 | Start Output Generation At 9:19:02 AM On 5/16/2020 4 | 5 | Output: Export STEP 6 | Type : ExportSTEP 7 | From : Variant [Production] of PCB Document [pixhawk_debug_adapter_mini.PcbDoc] 8 | Generated File[pixhawk_debug_adapter_mini(Production).step] 9 | 10 | 11 | Files Generated : 1 12 | Documents Printed : 0 13 | 14 | Finished Output Generation At 9:19:08 AM On 5/16/2020 15 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/3D Models/pixhawk_debug_adapter_mini_3dBoard.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/3D Models/pixhawk_debug_adapter_mini_3dBoard.PDF -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/BOM/Bill of Materials-pixhawk_debug_adapter_mini(Production).xlsx: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/BOM/Bill of Materials-pixhawk_debug_adapter_mini(Production).xlsx -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.EXTREP: -------------------------------------------------------------------------------- 1 | ------------------------------------------------------------------------------------------ 2 | Gerber File Extension Report For: pixhawk_debug_adapter_mini.GBR 5/17/2020 9:56:46 AM 3 | ------------------------------------------------------------------------------------------ 4 | 5 | 6 | ------------------------------------------------------------------------------------------ 7 | Layer Extension Layer Description 8 | ------------------------------------------------------------------------------------------ 9 | .GTO Top Overlay 10 | .GTP Top Paste 11 | .GTS Top Solder 12 | .GTL Top Layer 13 | .GBL Bottom Layer 14 | .GBS Bottom Solder 15 | .GBP Bottom Paste 16 | .GBO Bottom Overlay 17 | .GM1 Mechanical 01 Board Outline 18 | .GM2 Branding Top Overlay 19 | .GM12 Top Component Outline 20 | .GKO Keep-Out Layer 21 | .GPT Top Pad Master 22 | .GPB Bottom Pad Master 23 | .GD1 Drill Drawing 24 | .GG1 Drill Guide 25 | ------------------------------------------------------------------------------------------ 26 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GBO: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=32896* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | M02* 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GBP: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=128* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | M02* 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GBS: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Negative* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD54C,1.7532*% 17 | %ADD55R,1.7532X1.7532*% 18 | %ADD56C,6.2032*% 19 | %ADD57R,1.7932X1.7932*% 20 | %ADD58C,1.7932*% 21 | %ADD70C,0.9532*% 22 | D54* 23 | X347726Y25531D02* 24 | D03* 25 | D55* 26 | X322326D02* 27 | D03* 28 | D56* 29 | X40000Y40000D02* 30 | D03* 31 | Y310000D02* 32 | D03* 33 | X560000Y40000D02* 34 | D03* 35 | Y310000D02* 36 | D03* 37 | D57* 38 | X105000Y61651D02* 39 | D03* 40 | D58* 41 | Y87051D02* 42 | D03* 43 | Y112451D02* 44 | D03* 45 | Y137851D02* 46 | D03* 47 | Y163251D02* 48 | D03* 49 | Y188651D02* 50 | D03* 51 | Y214051D02* 52 | D03* 53 | Y239451D02* 54 | D03* 55 | Y264851D02* 56 | D03* 57 | Y290251D02* 58 | D03* 59 | D70* 60 | X40000Y62500D02* 61 | D03* 62 | X62500Y40000D02* 63 | D03* 64 | X40000Y17500D02* 65 | D03* 66 | X17500Y40000D02* 67 | D03* 68 | X56000Y24000D02* 69 | D03* 70 | X24000Y56000D02* 71 | D03* 72 | Y24000D02* 73 | D03* 74 | X56000Y56000D02* 75 | D03* 76 | Y326000D02* 77 | D03* 78 | X24000Y294000D02* 79 | D03* 80 | Y326000D02* 81 | D03* 82 | X56000Y294000D02* 83 | D03* 84 | X17500Y310000D02* 85 | D03* 86 | X40000Y287500D02* 87 | D03* 88 | X62500Y310000D02* 89 | D03* 90 | X40000Y332500D02* 91 | D03* 92 | X560000Y62500D02* 93 | D03* 94 | X582500Y40000D02* 95 | D03* 96 | X560000Y17500D02* 97 | D03* 98 | X537500Y40000D02* 99 | D03* 100 | X576000Y24000D02* 101 | D03* 102 | X544000Y56000D02* 103 | D03* 104 | Y24000D02* 105 | D03* 106 | X576000Y56000D02* 107 | D03* 108 | Y326000D02* 109 | D03* 110 | X544000Y294000D02* 111 | D03* 112 | Y326000D02* 113 | D03* 114 | X576000Y294000D02* 115 | D03* 116 | X537500Y310000D02* 117 | D03* 118 | X560000Y287500D02* 119 | D03* 120 | X582500Y310000D02* 121 | D03* 122 | X560000Y332500D02* 123 | D03* 124 | M02* 125 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GKO: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | M02* 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GM1: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD62C,0.0500*% 17 | %ADD71C,0.2540*% 18 | %ADD72C,0.1524*% 19 | D62* 20 | X0Y40000D02* 21 | G03* 22 | X40000Y0I40000J0D01* 23 | G01* 24 | Y350000D02* 25 | G03* 26 | X0Y310000I0J-40000D01* 27 | G01* 28 | X600000D02* 29 | G03* 30 | X560000Y350000I-40000J0D01* 31 | G01* 32 | Y0D02* 33 | G03* 34 | X600000Y40000I0J40000D01* 35 | G01* 36 | X-0Y310000D02* 37 | X0Y40000D01* 38 | X40000Y-0D02* 39 | X560000Y-0D01* 40 | X40000Y350000D02* 41 | X560000D01* 42 | X600000Y40000D02* 43 | Y310000D01* 44 | D71* 45 | X-46228Y15240D02* 46 | X-41148Y0D01* 47 | X-36068Y15240D01* 48 | X-41148Y310000D02* 49 | X-36068Y294760D01* 50 | X-46228D02* 51 | X-41148Y310000D01* 52 | Y0D02* 53 | Y106245D01* 54 | Y195627D02* 55 | Y310000D01* 56 | X-43688Y0D02* 57 | X-2540D01* 58 | X-43688Y310000D02* 59 | X6444D01* 60 | X-24892Y15240D02* 61 | X-19812Y0D01* 62 | X-14732Y15240D01* 63 | X-19812Y40000D02* 64 | X-14732Y24760D01* 65 | X-24892D02* 66 | X-19812Y40000D01* 67 | Y0D02* 68 | Y40000D01* 69 | X-22352Y0D02* 70 | X-2540D01* 71 | X-22352Y40000D02* 72 | X6444D01* 73 | X0Y-41148D02* 74 | X15240Y-36068D01* 75 | X0Y-41148D02* 76 | X15240Y-46228D01* 77 | X544760D02* 78 | X560000Y-41148D01* 79 | X544760Y-36068D02* 80 | X560000Y-41148D01* 81 | X0D02* 82 | X229975D01* 83 | X321896D02* 84 | X560000D01* 85 | X0Y-43688D02* 86 | Y-2540D01* 87 | X560000Y-43688D02* 88 | Y6444D01* 89 | X0Y-19812D02* 90 | X15240Y-14732D01* 91 | X0Y-19812D02* 92 | X15240Y-24892D01* 93 | X24760D02* 94 | X40000Y-19812D01* 95 | X24760Y-14732D02* 96 | X40000Y-19812D01* 97 | X0D02* 98 | X40000D01* 99 | X0Y-22352D02* 100 | Y-2540D01* 101 | X40000Y-22352D02* 102 | Y6444D01* 103 | X-70104Y350000D02* 104 | X-65024Y334760D01* 105 | X-75184D02* 106 | X-70104Y350000D01* 107 | X-75184Y15240D02* 108 | X-70104Y0D01* 109 | X-65024Y15240D01* 110 | X-70104Y216896D02* 111 | Y350000D01* 112 | Y0D02* 113 | Y124976D01* 114 | X-72644Y350000D02* 115 | X-2540D01* 116 | X-72644Y0D02* 117 | X-2540D01* 118 | X0Y-71628D02* 119 | X15240Y-66548D01* 120 | X0Y-71628D02* 121 | X15240Y-76708D01* 122 | X584760D02* 123 | X600000Y-71628D01* 124 | X584760Y-66548D02* 125 | X600000Y-71628D01* 126 | X0D02* 127 | X249975D01* 128 | X341896D02* 129 | X600000D01* 130 | X0Y-74168D02* 131 | Y-2540D01* 132 | X600000Y-74168D02* 133 | Y-2540D01* 134 | D72* 135 | X-44702Y110309D02* 136 | X-47242Y112848D01* 137 | Y117927D01* 138 | X-44702Y120466D01* 139 | X-42163D01* 140 | X-39624Y117927D01* 141 | Y115387D01* 142 | Y117927D01* 143 | X-37085Y120466D01* 144 | X-34546D01* 145 | X-32006Y117927D01* 146 | Y112848D01* 147 | X-34546Y110309D01* 148 | X-32006Y125544D02* 149 | Y130623D01* 150 | Y128083D01* 151 | X-47242D01* 152 | X-44702Y125544D01* 153 | X-32006Y138240D02* 154 | X-34546D01* 155 | Y140779D01* 156 | X-32006D01* 157 | Y138240D01* 158 | X-44702Y150936D02* 159 | X-47242Y153475D01* 160 | Y158553D01* 161 | X-44702Y161093D01* 162 | X-34546D01* 163 | X-32006Y158553D01* 164 | Y153475D01* 165 | X-34546Y150936D01* 166 | X-44702D01* 167 | Y166171D02* 168 | X-47242Y168710D01* 169 | Y173789D01* 170 | X-44702Y176328D01* 171 | X-34546D01* 172 | X-32006Y173789D01* 173 | Y168710D01* 174 | X-34546Y166171D01* 175 | X-44702D01* 176 | Y181406D02* 177 | X-47242Y183945D01* 178 | Y189024D01* 179 | X-44702Y191563D01* 180 | X-34546D01* 181 | X-32006Y189024D01* 182 | Y183945D01* 183 | X-34546Y181406D01* 184 | X-44702D01* 185 | X-10670Y50157D02* 186 | X-25905D01* 187 | X-18288Y42540D01* 188 | Y52697D01* 189 | X-10670Y57775D02* 190 | X-13210D01* 191 | Y60314D01* 192 | X-10670D01* 193 | Y57775D01* 194 | X-23366Y70471D02* 195 | X-25905Y73010D01* 196 | Y78088D01* 197 | X-23366Y80628D01* 198 | X-13210D01* 199 | X-10670Y78088D01* 200 | Y73010D01* 201 | X-13210Y70471D01* 202 | X-23366D01* 203 | Y85706D02* 204 | X-25905Y88245D01* 205 | Y93324D01* 206 | X-23366Y95863D01* 207 | X-13210D01* 208 | X-10670Y93324D01* 209 | Y88245D01* 210 | X-13210Y85706D01* 211 | X-23366D01* 212 | Y100941D02* 213 | X-25905Y103480D01* 214 | Y108559D01* 215 | X-23366Y111098D01* 216 | X-13210D01* 217 | X-10670Y108559D01* 218 | Y103480D01* 219 | X-13210Y100941D01* 220 | X-23366D01* 221 | X244196Y-35055D02* 222 | X234039D01* 223 | Y-42672D01* 224 | X239118Y-40133D01* 225 | X241657D01* 226 | X244196Y-42672D01* 227 | Y-47750D01* 228 | X241657Y-50290D01* 229 | X236579D01* 230 | X234039Y-47750D01* 231 | X259431Y-35055D02* 232 | X254353Y-37594D01* 233 | X249275Y-42672D01* 234 | Y-47750D01* 235 | X251814Y-50290D01* 236 | X256892D01* 237 | X259431Y-47750D01* 238 | Y-45211D01* 239 | X256892Y-42672D01* 240 | X249275D01* 241 | X264510Y-50290D02* 242 | Y-47750D01* 243 | X267049D01* 244 | Y-50290D01* 245 | X264510D01* 246 | X277206Y-37594D02* 247 | X279745Y-35055D01* 248 | X284823D01* 249 | X287362Y-37594D01* 250 | Y-47750D01* 251 | X284823Y-50290D01* 252 | X279745D01* 253 | X277206Y-47750D01* 254 | Y-37594D01* 255 | X292441D02* 256 | X294980Y-35055D01* 257 | X300058D01* 258 | X302597Y-37594D01* 259 | Y-47750D01* 260 | X300058Y-50290D01* 261 | X294980D01* 262 | X292441Y-47750D01* 263 | Y-37594D01* 264 | X307676D02* 265 | X310215Y-35055D01* 266 | X315293D01* 267 | X317832Y-37594D01* 268 | Y-47750D01* 269 | X315293Y-50290D01* 270 | X310215D01* 271 | X307676Y-47750D01* 272 | Y-37594D01* 273 | X50157Y-28953D02* 274 | Y-13719D01* 275 | X42540Y-21336D01* 276 | X52697D01* 277 | X57775Y-28953D02* 278 | Y-26414D01* 279 | X60314D01* 280 | Y-28953D01* 281 | X57775D01* 282 | X70471Y-16258D02* 283 | X73010Y-13719D01* 284 | X78088D01* 285 | X80628Y-16258D01* 286 | Y-26414D01* 287 | X78088Y-28953D01* 288 | X73010D01* 289 | X70471Y-26414D01* 290 | Y-16258D01* 291 | X85706D02* 292 | X88245Y-13719D01* 293 | X93324D01* 294 | X95863Y-16258D01* 295 | Y-26414D01* 296 | X93324Y-28953D01* 297 | X88245D01* 298 | X85706Y-26414D01* 299 | Y-16258D01* 300 | X100941D02* 301 | X103480Y-13719D01* 302 | X108559D01* 303 | X111098Y-16258D01* 304 | Y-26414D01* 305 | X108559Y-28953D01* 306 | X103480D01* 307 | X100941Y-26414D01* 308 | Y-16258D01* 309 | X-73658Y129039D02* 310 | X-76198Y131579D01* 311 | Y136657D01* 312 | X-73658Y139196D01* 313 | X-71119D01* 314 | X-68580Y136657D01* 315 | Y134118D01* 316 | Y136657D01* 317 | X-66041Y139196D01* 318 | X-63502D01* 319 | X-60963Y136657D01* 320 | Y131579D01* 321 | X-63502Y129039D01* 322 | X-76198Y154431D02* 323 | Y144275D01* 324 | X-68580D01* 325 | X-71119Y149353D01* 326 | Y151892D01* 327 | X-68580Y154431D01* 328 | X-63502D01* 329 | X-60963Y151892D01* 330 | Y146814D01* 331 | X-63502Y144275D01* 332 | X-60963Y159510D02* 333 | X-63502D01* 334 | Y162049D01* 335 | X-60963D01* 336 | Y159510D01* 337 | X-73658Y172206D02* 338 | X-76198Y174745D01* 339 | Y179823D01* 340 | X-73658Y182362D01* 341 | X-63502D01* 342 | X-60963Y179823D01* 343 | Y174745D01* 344 | X-63502Y172206D01* 345 | X-73658D01* 346 | Y187441D02* 347 | X-76198Y189980D01* 348 | Y195058D01* 349 | X-73658Y197597D01* 350 | X-63502D01* 351 | X-60963Y195058D01* 352 | Y189980D01* 353 | X-63502Y187441D01* 354 | X-73658D01* 355 | Y202676D02* 356 | X-76198Y205215D01* 357 | Y210293D01* 358 | X-73658Y212832D01* 359 | X-63502D01* 360 | X-60963Y210293D01* 361 | Y205215D01* 362 | X-63502Y202676D01* 363 | X-73658D01* 364 | X264196Y-65535D02* 365 | X259118Y-68074D01* 366 | X254039Y-73152D01* 367 | Y-78230D01* 368 | X256579Y-80770D01* 369 | X261657D01* 370 | X264196Y-78230D01* 371 | Y-75691D01* 372 | X261657Y-73152D01* 373 | X254039D01* 374 | X269275Y-68074D02* 375 | X271814Y-65535D01* 376 | X276892D01* 377 | X279431Y-68074D01* 378 | Y-78230D01* 379 | X276892Y-80770D01* 380 | X271814D01* 381 | X269275Y-78230D01* 382 | Y-68074D01* 383 | X284510Y-80770D02* 384 | Y-78230D01* 385 | X287049D01* 386 | Y-80770D01* 387 | X284510D01* 388 | X297206Y-68074D02* 389 | X299745Y-65535D01* 390 | X304823D01* 391 | X307362Y-68074D01* 392 | Y-78230D01* 393 | X304823Y-80770D01* 394 | X299745D01* 395 | X297206Y-78230D01* 396 | Y-68074D01* 397 | X312441D02* 398 | X314980Y-65535D01* 399 | X320058D01* 400 | X322597Y-68074D01* 401 | Y-78230D01* 402 | X320058Y-80770D01* 403 | X314980D01* 404 | X312441Y-78230D01* 405 | Y-68074D01* 406 | X327676D02* 407 | X330215Y-65535D01* 408 | X335293D01* 409 | X337832Y-68074D01* 410 | Y-78230D01* 411 | X335293Y-80770D01* 412 | X330215D01* 413 | X327676Y-78230D01* 414 | Y-68074D01* 415 | M02* 416 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GM12: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=32896* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD73C,0.0250*% 17 | D73* 18 | X140977Y93548D02* 19 | G03* 20 | X150977Y83548I10000J0D01* 21 | G01* 22 | Y103548D02* 23 | G03* 24 | X140977Y93548I0J-10000D01* 25 | G01* 26 | X164977D02* 27 | G03* 28 | X154977Y103548I-10000J0D01* 29 | G01* 30 | Y83548D02* 31 | G03* 32 | X164977Y93548I0J10000D01* 33 | G01* 34 | X249357Y31567D02* 35 | X259357D01* 36 | X249357D02* 37 | Y39067D01* 38 | X259357D01* 39 | Y31567D02* 40 | Y39067D01* 41 | X208857Y31567D02* 42 | X218857D01* 43 | X208857D02* 44 | Y39067D01* 45 | X218857D01* 46 | Y31567D02* 47 | Y39067D01* 48 | X208857Y17817D02* 49 | X218857D01* 50 | Y10317D02* 51 | Y17817D01* 52 | X208857Y10317D02* 53 | X218857D01* 54 | X208857D02* 55 | Y17817D01* 56 | X249357Y17567D02* 57 | X259357D01* 58 | Y10067D02* 59 | Y17567D01* 60 | X249357Y10067D02* 61 | X259357D01* 62 | X249357D02* 63 | Y17567D01* 64 | X213107Y40567D02* 65 | X255107D01* 66 | Y8567D02* 67 | Y40567D01* 68 | X213107Y8567D02* 69 | X255107D01* 70 | X213107D02* 71 | Y40567D01* 72 | X125137Y15500D02* 73 | X140637D01* 74 | Y44500D01* 75 | X125137D02* 76 | X140637D01* 77 | X125137Y15500D02* 78 | Y44500D01* 79 | X142887Y37725D02* 80 | X146387D01* 81 | Y41275D01* 82 | X142887D02* 83 | X146387D01* 84 | X142887Y37725D02* 85 | Y41275D01* 86 | Y18725D02* 87 | X146387D01* 88 | Y22275D01* 89 | X142887D02* 90 | X146387D01* 91 | X142887Y18725D02* 92 | Y22275D01* 93 | X119387D02* 94 | X122887D01* 95 | X119387Y18725D02* 96 | Y22275D01* 97 | Y18725D02* 98 | X122887D01* 99 | Y22275D01* 100 | X119387Y31775D02* 101 | X122887D01* 102 | X119387Y28225D02* 103 | Y31775D01* 104 | Y28225D02* 105 | X122887D01* 106 | Y31775D01* 107 | X119387Y41275D02* 108 | X122887D01* 109 | X119387Y37725D02* 110 | Y41275D01* 111 | Y37725D02* 112 | X122887D01* 113 | Y41275D01* 114 | X23493Y96078D02* 115 | X52493D01* 116 | Y109078D01* 117 | X23493D02* 118 | X52493D01* 119 | X23493Y96078D02* 120 | Y109078D01* 121 | X40143Y111078D02* 122 | Y114078D01* 123 | X35843D02* 124 | X40143D01* 125 | X35843Y111078D02* 126 | Y114078D01* 127 | Y111078D02* 128 | X40143D01* 129 | X45343Y91078D02* 130 | Y94078D01* 131 | Y91078D02* 132 | X49643D01* 133 | Y94078D01* 134 | X45343D02* 135 | X49643D01* 136 | X26343Y91078D02* 137 | Y94078D01* 138 | Y91078D02* 139 | X30643D01* 140 | Y94078D01* 141 | X26343D02* 142 | X30643D01* 143 | X156902Y68108D02* 144 | Y71108D01* 145 | X159902D01* 146 | Y68108D02* 147 | Y71108D01* 148 | X156902Y68108D02* 149 | X159902D01* 150 | X146902D02* 151 | Y71108D01* 152 | X143902Y68108D02* 153 | X146902D01* 154 | X143902D02* 155 | Y71108D01* 156 | X146902D01* 157 | X157902Y65608D02* 158 | Y73608D01* 159 | X145902Y65608D02* 160 | X157902D01* 161 | X145902D02* 162 | Y73608D01* 163 | X157902D01* 164 | X308326Y37531D02* 165 | X361326D01* 166 | Y13531D02* 167 | Y37531D01* 168 | X308326Y13531D02* 169 | X361326D01* 170 | X308326D02* 171 | Y37531D01* 172 | X150977Y83548D02* 173 | Y103548D01* 174 | X154977Y83548D02* 175 | Y103548D01* 176 | X285750Y152400D02* 177 | X311150D01* 178 | X285750D02* 179 | Y304800D01* 180 | X311150D01* 181 | Y152400D02* 182 | Y304800D01* 183 | X461640Y9900D02* 184 | Y340100D01* 185 | X368940D02* 186 | X461640D01* 187 | X368940Y9900D02* 188 | Y340100D01* 189 | Y9900D02* 190 | X461640D01* 191 | X585650Y109000D02* 192 | Y240750D01* 193 | X518950D02* 194 | X585650D01* 195 | X518950Y109000D02* 196 | Y240750D01* 197 | Y109000D02* 198 | X585650D01* 199 | X48072Y128493D02* 200 | Y140993D01* 201 | X52072D01* 202 | Y128493D02* 203 | Y140993D01* 204 | X48072Y128493D02* 205 | X52072D01* 206 | X36072D02* 207 | Y140993D01* 208 | X32072Y128493D02* 209 | X36072D01* 210 | X32072D02* 211 | Y140993D01* 212 | X36072D01* 213 | X52072Y128493D02* 214 | Y140993D01* 215 | X32072Y128493D02* 216 | X52072D01* 217 | X32072D02* 218 | Y140993D01* 219 | X52072D01* 220 | X94121Y30718D02* 221 | X99121D01* 222 | X94121D02* 223 | Y33218D01* 224 | X99121D01* 225 | Y30718D02* 226 | Y33218D01* 227 | X94121Y25718D02* 228 | X99121D01* 229 | Y23218D02* 230 | Y25718D01* 231 | X94121Y23218D02* 232 | X99121D01* 233 | X94121D02* 234 | Y25718D01* 235 | Y33218D02* 236 | X99121D01* 237 | Y23218D02* 238 | Y33218D01* 239 | X94121Y23218D02* 240 | X99121D01* 241 | X94121D02* 242 | Y33218D01* 243 | X544645Y252305D02* 244 | X571645D01* 245 | X544645Y262305D02* 246 | X571645D01* 247 | X544645Y252305D02* 248 | Y262305D01* 249 | X571645Y252305D02* 250 | Y262305D01* 251 | X142128Y235000D02* 252 | X171702D01* 253 | Y115000D02* 254 | Y235000D01* 255 | X142128Y115000D02* 256 | X171702D01* 257 | X142128D02* 258 | Y235000D01* 259 | X234576Y237000D02* 260 | Y323000D01* 261 | X214576D02* 262 | X234576D01* 263 | X214576Y237000D02* 264 | Y323000D01* 265 | Y237000D02* 266 | X234576D01* 267 | X55140Y152976D02* 268 | Y232976D01* 269 | X26140D02* 270 | X55140D01* 271 | X26140Y152976D02* 272 | Y232976D01* 273 | Y152976D02* 274 | X55140D01* 275 | X101800Y58451D02* 276 | X108200D01* 277 | X101800D02* 278 | Y64851D01* 279 | X108200D01* 280 | Y58451D02* 281 | Y64851D01* 282 | X101800Y83851D02* 283 | X108200D01* 284 | X101800D02* 285 | Y90251D01* 286 | X108200D01* 287 | Y83851D02* 288 | Y90251D01* 289 | X101800Y109251D02* 290 | X108200D01* 291 | X101800D02* 292 | Y115651D01* 293 | X108200D01* 294 | Y109251D02* 295 | Y115651D01* 296 | X101800Y134651D02* 297 | X108200D01* 298 | X101800D02* 299 | Y141051D01* 300 | X108200D01* 301 | Y134651D02* 302 | Y141051D01* 303 | X101800Y160051D02* 304 | X108200D01* 305 | X101800D02* 306 | Y166451D01* 307 | X108200D01* 308 | Y160051D02* 309 | Y166451D01* 310 | X101800Y185451D02* 311 | X108200D01* 312 | X101800D02* 313 | Y191851D01* 314 | X108200D01* 315 | Y185451D02* 316 | Y191851D01* 317 | X101800Y210851D02* 318 | X108200D01* 319 | X101800D02* 320 | Y217251D01* 321 | X108200D01* 322 | Y210851D02* 323 | Y217251D01* 324 | X101800Y236251D02* 325 | X108200D01* 326 | X101800D02* 327 | Y242651D01* 328 | X108200D01* 329 | Y236251D02* 330 | Y242651D01* 331 | X101800Y261651D02* 332 | X108200D01* 333 | X101800D02* 334 | Y268051D01* 335 | X108200D01* 336 | Y261651D02* 337 | Y268051D01* 338 | X101800Y287051D02* 339 | X108200D01* 340 | X101800D02* 341 | Y293451D01* 342 | X108200D01* 343 | Y287051D02* 344 | Y293451D01* 345 | X92300Y73251D02* 346 | X117700D01* 347 | X92300D02* 348 | Y278651D01* 349 | X117700D01* 350 | Y73251D02* 351 | Y278651D01* 352 | X222123Y72140D02* 353 | X280123D01* 354 | Y136140D01* 355 | X222123D02* 356 | X280123D01* 357 | X222123Y72140D02* 358 | Y136140D01* 359 | X125399Y58636D02* 360 | X135399D01* 361 | X125399Y53636D02* 362 | Y58636D01* 363 | Y53636D02* 364 | X135399D01* 365 | Y58636D01* 366 | X125399D02* 367 | X127899D01* 368 | X125399Y53636D02* 369 | Y58636D01* 370 | Y53636D02* 371 | X127899D01* 372 | Y58636D01* 373 | X132899Y53636D02* 374 | X135399D01* 375 | Y58636D01* 376 | X132899D02* 377 | X135399D01* 378 | X132899Y53636D02* 379 | Y58636D01* 380 | X129611Y68812D02* 381 | Y73812D01* 382 | X127111Y68812D02* 383 | X129611D01* 384 | X127111D02* 385 | Y73812D01* 386 | X129611D01* 387 | X134611Y68812D02* 388 | Y73812D01* 389 | X137111D01* 390 | Y68812D02* 391 | Y73812D01* 392 | X134611Y68812D02* 393 | X137111D01* 394 | X127111D02* 395 | Y73812D01* 396 | X137111D01* 397 | Y68812D02* 398 | Y73812D01* 399 | X127111Y68812D02* 400 | X137111D01* 401 | X163208Y31786D02* 402 | X168208D01* 403 | X163208D02* 404 | Y34286D01* 405 | X168208D01* 406 | Y31786D02* 407 | Y34286D01* 408 | X163208Y26786D02* 409 | X168208D01* 410 | Y24286D02* 411 | Y26786D01* 412 | X163208Y24286D02* 413 | X168208D01* 414 | X163208D02* 415 | Y26786D01* 416 | Y34286D02* 417 | X168208D01* 418 | Y24286D02* 419 | Y34286D01* 420 | X163208Y24286D02* 421 | X168208D01* 422 | X163208D02* 423 | Y34286D01* 424 | X174949Y304050D02* 425 | Y314050D01* 426 | X147949Y304050D02* 427 | Y314050D01* 428 | X174949D01* 429 | X147949Y304050D02* 430 | X174949D01* 431 | M02* 432 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GM2: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=8388736* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD62C,0.0500*% 17 | D62* 18 | X600000Y310000D02* 19 | G03* 20 | X560000Y350000I-40000J0D01* 21 | G01* 22 | X40000D02* 23 | G03* 24 | X0Y310000I0J-40000D01* 25 | G01* 26 | X560000Y0D02* 27 | G03* 28 | X600000Y40000I0J40000D01* 29 | G01* 30 | X0D02* 31 | G03* 32 | X40000Y0I40000J0D01* 33 | G01* 34 | Y350000D02* 35 | X560000D01* 36 | X40000Y-0D02* 37 | X560000Y-0D01* 38 | X600000Y40000D02* 39 | Y310000D01* 40 | X-0D02* 41 | X0Y40000D01* 42 | M02* 43 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GM5: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.14 (345)* 3 | G04* 4 | G04 Layer_Color=16711935* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G01* 9 | G75* 10 | M02* 11 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GM8: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=32896* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,DC682872-3E3D-4755-909D-B8D1B2C2481C* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | M02* 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.GPB: -------------------------------------------------------------------------------- 1 | G04* 2 | G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.1.8 (145)* 3 | G04* 4 | G04 Layer_Color=255* 5 | %FSLAX44Y44*% 6 | %MOMM*% 7 | G71* 8 | G04* 9 | G04 #@! TF.SameCoordinates,C9CF11F6-8CB7-4B33-927B-0983859D9422* 10 | G04* 11 | G04* 12 | G04 #@! TF.FilePolarity,Positive* 13 | G04* 14 | G01* 15 | G75* 16 | %ADD63C,1.5500*% 17 | %ADD64R,1.5500X1.5500*% 18 | %ADD65C,6.0000*% 19 | %ADD66R,1.5900X1.5900*% 20 | %ADD67C,1.5900*% 21 | D63* 22 | X347726Y25531D02* 23 | D03* 24 | D64* 25 | X322326D02* 26 | D03* 27 | D65* 28 | X40000Y40000D02* 29 | D03* 30 | Y310000D02* 31 | D03* 32 | X560000Y40000D02* 33 | D03* 34 | Y310000D02* 35 | D03* 36 | D66* 37 | X105000Y61651D02* 38 | D03* 39 | D67* 40 | Y87051D02* 41 | D03* 42 | Y112451D02* 43 | D03* 44 | Y137851D02* 45 | D03* 46 | Y163251D02* 47 | D03* 48 | Y188651D02* 49 | D03* 50 | Y214051D02* 51 | D03* 52 | Y239451D02* 53 | D03* 54 | Y264851D02* 55 | D03* 56 | Y290251D02* 57 | D03* 58 | M02* 59 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.RUL: -------------------------------------------------------------------------------- 1 | DRC Rules Export File for PCB: C:\Users\Public\Documents\Altium\AD17\Workspace\Auterion\Auterion-Hardware-Reference-Designs\pixhawk_debug\Proto1\pixhawk_debug_adapter_mini.PcbDoc 2 | RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0 3 | RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=6.00 4 | RuleKind=Width|RuleName=Width|Scope=Board|Minimum=6.00 5 | RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=4.00 6 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Gerber/pixhawk_debug_adapter_mini.apr: -------------------------------------------------------------------------------- 1 | D10 ROUNDED 9.842 9.842 0.000 LINE 0.000 2 | D11 ROUNDED 7.874 7.874 0.000 LINE 0.000 3 | D12 ROUNDED 4.724 4.724 0.000 LINE 0.000 4 | D13 ROUNDED 15.748 15.748 0.000 LINE 0.000 5 | D14 ROUNDED 19.685 19.685 0.000 LINE 0.000 6 | D15 ROUNDED 7.000 7.000 0.000 LINE 0.000 7 | D16 ROUNDED 5.500 5.500 0.000 LINE 0.000 8 | D17 ROUNDED 5.512 5.512 0.000 LINE 0.000 9 | D18 ROUNDED 7.087 7.087 0.000 LINE 0.000 10 | D23 RECTANGULAR 3.937 3.937 0.000 FLASH 180.000 11 | D54 ROUNDED 69.024 69.024 0.000 FLASH 0.000 12 | D55 RECTANGULAR 69.024 69.024 0.000 FLASH 0.000 13 | D56 ROUNDED 244.220 244.220 0.000 FLASH 0.000 14 | D57 RECTANGULAR 70.598 70.598 0.000 FLASH 90.000 15 | D58 ROUNDED 70.598 70.598 0.000 FLASH 0.000 16 | D59 ROUNDED 20.000 20.000 0.000 LINE 0.000 17 | D60 ROUNDED 15.000 15.000 0.000 LINE 0.000 18 | D61 ROUNDED 11.811 11.811 0.000 LINE 0.000 19 | D62 ROUNDED 1.968 1.968 0.000 LINE 0.000 20 | D63 ROUNDED 61.024 61.024 0.000 FLASH 0.000 21 | D64 RECTANGULAR 61.024 61.024 0.000 FLASH 0.000 22 | D65 ROUNDED 236.220 236.220 0.000 FLASH 0.000 23 | D66 RECTANGULAR 62.598 62.598 0.000 FLASH 90.000 24 | D67 ROUNDED 62.598 62.598 0.000 FLASH 0.000 25 | D68 ROUNDED 29.528 29.528 0.000 FLASH 0.000 26 | D69 ROUNDED 18.000 18.000 0.000 FLASH 0.000 27 | D70 ROUNDED 37.528 37.528 0.000 FLASH 0.000 28 | D71 ROUNDED 10.000 10.000 0.000 LINE 0.000 29 | D72 ROUNDED 6.000 6.000 0.000 LINE 0.000 30 | D73 ROUNDED 0.984 0.984 0.000 LINE 0.000 31 | D74 ROUNDED 2.000 2.000 0.000 LINE 0.000 32 | D75 ROUNDED 2.665 2.665 0.000 LINE 0.000 33 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/NC Drill/pixhawk_debug_adapter_mini.DRR: -------------------------------------------------------------------------------- 1 | ---------------------------------------------------------------------------------------------------------------------------------- 2 | NCDrill File Report For: pixhawk_debug_adapter_mini.PcbDoc 5/17/2020 9:56:45 AM 3 | ---------------------------------------------------------------------------------------------------------------------------------- 4 | 5 | Layer Pair : Top Layer to Bottom Layer 6 | ASCII RoundHoles File : pixhawk_debug_adapter_mini.TXT 7 | 8 | Tool Hole Size Hole Tolerance Hole Type Hole Count Plated Tool Travel 9 | ---------------------------------------------------------------------------------------------------------------------------------- 10 | T1 10mil (0.254mm) Round 188 PTH 0.00inch (0.00mm) 11 | T2 14mil (0.35mm) Round 32 PTH 0.00inch (0.00mm) 12 | T3 40mil (1.02mm) Round 2 PTH 0.00inch (0.00mm) 13 | T4 42mil (1.06mm) Round 10 PTH 0.00inch (0.00mm) 14 | T5 118mil (3mm) Round 4 PTH 0.00inch (0.00mm) 15 | ---------------------------------------------------------------------------------------------------------------------------------- 16 | Totals 236 17 | 18 | Total Processing Time (hh:mm:ss) : 00:00:00 19 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/NC Drill/pixhawk_debug_adapter_mini.LDP: -------------------------------------------------------------------------------- 1 | Layer Pairs Export File for PCB: C:\Users\Public\Documents\Altium\AD17\Workspace\Auterion\Auterion-Hardware-Reference-Designs\pixhawk_debug\Proto1\pixhawk_debug_adapter_mini.PcbDoc 2 | LayersSetName=Top_Bot_Thru_Holes|DrillFile=pixhawk_debug_adapter_mini.txt|DrillLayers=gtl,gbl 3 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/NC Drill/pixhawk_debug_adapter_mini.TXT: -------------------------------------------------------------------------------- 1 | M48 2 | ;Layer_Color=9474304 3 | ;FILE_FORMAT=2:5 4 | INCH,LZ 5 | ;TYPE=PLATED 6 | T1F00S00C0.01000 7 | T2F00S00C0.01378 8 | T3F00S00C0.04016 9 | T4F00S00C0.04173 10 | T5F00S00C0.11811 11 | % 12 | T01 13 | X0003897Y002765 14 | X00024Y0040036 15 | X0011277Y0040644 16 | X0014516Y0036034 17 | X0023931Y0038475 18 | X0034223Y0036316 19 | X0046116Y0034315 20 | X0053847Y0033516 21 | X0050288Y0038812 22 | X0046623Y0045275 23 | X0046184Y0051014 24 | X0044312Y0059193 25 | X0043998Y006931 26 | X0052366Y0069356 27 | X005506Y0064431 28 | X0057985Y00601 29 | X0062402Y0056567 30 | X0061796Y0052525 31 | X0056921Y0051607 32 | X0068599Y004766 33 | X0071745Y004594 34 | X0072817Y0057215 35 | X0067322Y0037749 36 | X006458Y0029203 37 | X0066436Y0024522 38 | X0065256Y001819 39 | X0061801Y0015639 40 | X0062515Y0008181 41 | X0053739Y0011464 42 | X0049334Y0019376 43 | X0057604Y0023234 44 | X0071728Y0020179 45 | X0074498Y0022116 46 | X0072873Y0030048 47 | X0071894Y0002501 48 | X0042753Y0008144 49 | X0037996Y0006879 50 | X0033877Y0011274 51 | X0036164Y0015066 52 | X0032275Y0003323 53 | X0032326Y0048556 54 | X0024324Y0062564 55 | X0016772Y0068482 56 | X0016728Y0072205 57 | X0012928Y0065657 58 | X00024Y0066106 59 | Y0052707 60 | X0016411Y0056567 61 | X005645Y0073865 62 | X0076618Y0063791 63 | X0080204Y0067339 64 | X0082368Y0059245 65 | X0087589Y0056582 66 | X0091072Y0055775 67 | X0091258Y0064923 68 | X008744Y0062084 69 | X0098879Y0065324 70 | X0105295Y0072539 71 | X0124922Y0065531 72 | X0124348Y0056855 73 | X0121428Y0055659 74 | X0119136Y0052621 75 | X011571Y0045246 76 | X0115981Y0038373 77 | X0117972Y0033693 78 | X0114702Y0031 79 | X0122524Y0023671 80 | X0127485Y0023898 81 | X0127746Y0028453 82 | X0131014Y0019444 83 | X0148704Y0016644 84 | X0163549Y0020369 85 | X017796Y0015734 86 | X0192151Y0020689 87 | X0189309Y0029017 88 | X0189473Y0039414 89 | X0195958Y0039719 90 | X0204337Y0039658 91 | X0211526Y0039611 92 | X0218377Y0040383 93 | X0229287Y0040213 94 | X0229243Y0029502 95 | X022074Y0030009 96 | X0204972Y0029606 97 | X019983Y0013539 98 | X0199842Y0002987 99 | X0184561Y00029 100 | X0166657Y0002486 101 | X0143167Y0002483 102 | X0118939Y0002469 103 | X0094129Y0002468 104 | Y0008419 105 | X0094816Y0027153 106 | X0089898Y0023657 107 | X0083786Y0027841 108 | X0083811Y0033713 109 | X0083635Y0038901 110 | X0099288Y0038691 111 | X0129254Y0044272 112 | X0130667Y0048884 113 | X0134163Y0052897 114 | X0137306Y004393 115 | X013754Y0033564 116 | X0138224Y0062953 117 | X0139039Y0073693 118 | X0189489Y0069071 119 | X0195665Y0069375 120 | X0202962Y0063907 121 | X0202914Y0053942 122 | X0202878Y0048926 123 | X0189384Y0048884 124 | X0189489Y005879 125 | X0077039Y0025166 126 | X0077484Y0018053 127 | X0077491Y0012668 128 | X0083335Y0018053 129 | X02334Y00516 130 | Y00564 131 | Y00816 132 | Y00864 133 | Y00912 134 | X023089Y0097312 135 | X0230956Y0106586 136 | X0211526Y0101314 137 | Y0095869 138 | X0205758Y0097111 139 | Y010375 140 | Y0110445 141 | X0194966Y0111014 142 | X0191633Y0114015 143 | X0191237Y0103412 144 | X0181265Y0118728 145 | X0178791Y0134293 146 | X0195375Y0134229 147 | X020333Y0124161 148 | X0164269Y0119823 149 | X0162305Y0134614 150 | X0149632Y013455 151 | X0137637Y013454 152 | X0125106Y0134529 153 | X0113174Y013454 154 | X0101342 155 | X0093785Y0126607 156 | X0096202Y0121033 157 | X0087857Y0119823 158 | X0087769Y0114935 159 | X0087813Y0108651 160 | X0087857Y0102352 161 | X0080484Y010156 162 | X008706Y0089428 163 | X0094853Y0093035 164 | X009217Y0081814 165 | X0077901Y0082735 166 | X0105384Y0079677 167 | X0111558Y0094933 168 | X0125028Y0103086 169 | X0137006Y0104272 170 | X0136675Y0094272 171 | X0137054Y0083531 172 | X0126261Y0085008 173 | X013225Y0110725 174 | X013741Y0120123 175 | X0113083Y0115173 176 | X00866Y0130895 177 | X0066451Y0130771 178 | X0051217Y0130668 179 | X0035094Y0126368 180 | X0034223Y0099213 181 | X0033703Y0089428 182 | X0043877Y0089215 183 | X0044069Y0079511 184 | X0060145Y0077876 185 | X0060218Y0087093 186 | X0054466Y0092939 187 | X0047617Y0099415 188 | X0047845Y0106739 189 | X0068864Y0114924 190 | X0069723Y0090538 191 | X0074881Y0075837 192 | X0016728Y0075974 193 | X0016737Y0080047 194 | X0016728Y0084016 195 | X0012988Y0086362 196 | X0022003Y0091612 197 | X0015704Y0100808 198 | X0005956Y0104636 199 | X00024Y0094047 200 | Y0079366 201 | T02 202 | X0009449Y0009449 203 | X0015748Y000689 204 | X0022047Y0009449 205 | X0024606Y0015748 206 | X0022047Y0022047 207 | X0015748Y0024606 208 | X0009449Y0022047 209 | X000689Y0015748 210 | X0211614 211 | X0214173Y0022047 212 | X0220472Y0024606 213 | X0226772Y0022047 214 | X0229331Y0015748 215 | X0226772Y0009449 216 | X0220472Y000689 217 | X0214173Y0009449 218 | Y0115748 219 | X0211614Y0122047 220 | X0214173Y0128347 221 | X0220472Y0130905 222 | X0226772Y0128347 223 | X0229331Y0122047 224 | X0226772Y0115748 225 | X0220472Y0113189 226 | X0022047Y0115748 227 | X0024606Y0122047 228 | X0022047Y0128347 229 | X0015748Y0130905 230 | X0009449Y0128347 231 | X000689Y0122047 232 | X0009449Y0115748 233 | X0015748Y0113189 234 | T03 235 | X01269Y0010052 236 | X01369 237 | T04 238 | X0041339Y0024272 239 | Y0034272 240 | Y0044272 241 | Y0054272 242 | Y0064272 243 | Y0074272 244 | Y0084272 245 | Y0094272 246 | Y0104272 247 | Y0114272 248 | T05 249 | X0015748Y0015748 250 | X0220472 251 | Y0122047 252 | X0015748 253 | M30 254 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/matrix/matrix: -------------------------------------------------------------------------------- 1 | 2 | STEP { 3 | COL=1 4 | NAME=PCB 5 | } 6 | 7 | 8 | LAYER { 9 | ROW=1 10 | CONTEXT=BOARD 11 | TYPE=COMPONENT 12 | NAME=COMP_+_TOP 13 | POLARITY=POSITIVE 14 | START_NAME= 15 | END_NAME= 16 | OLD_NAME= 17 | } 18 | 19 | LAYER { 20 | ROW=2 21 | CONTEXT=BOARD 22 | TYPE=SILK_SCREEN 23 | NAME=TOP_OVERLAY 24 | POLARITY=POSITIVE 25 | START_NAME= 26 | END_NAME= 27 | OLD_NAME= 28 | } 29 | 30 | LAYER { 31 | ROW=3 32 | CONTEXT=BOARD 33 | TYPE=SOLDER_PASTE 34 | NAME=TOP_PASTE 35 | POLARITY=POSITIVE 36 | START_NAME= 37 | END_NAME= 38 | OLD_NAME= 39 | } 40 | 41 | LAYER { 42 | ROW=4 43 | CONTEXT=BOARD 44 | TYPE=SOLDER_MASK 45 | NAME=TOP_SOLDER 46 | POLARITY=POSITIVE 47 | START_NAME= 48 | END_NAME= 49 | OLD_NAME= 50 | } 51 | 52 | LAYER { 53 | ROW=5 54 | CONTEXT=BOARD 55 | TYPE=SIGNAL 56 | NAME=TOP_LAYER 57 | POLARITY=POSITIVE 58 | START_NAME= 59 | END_NAME= 60 | OLD_NAME= 61 | } 62 | 63 | LAYER { 64 | ROW=6 65 | CONTEXT=BOARD 66 | TYPE=SIGNAL 67 | NAME=BOTTOM_LAYER 68 | POLARITY=POSITIVE 69 | START_NAME= 70 | END_NAME= 71 | OLD_NAME= 72 | } 73 | 74 | LAYER { 75 | ROW=7 76 | CONTEXT=BOARD 77 | TYPE=SOLDER_MASK 78 | NAME=BOTTOM_SOLDER 79 | POLARITY=POSITIVE 80 | START_NAME= 81 | END_NAME= 82 | OLD_NAME= 83 | } 84 | 85 | LAYER { 86 | ROW=8 87 | CONTEXT=BOARD 88 | TYPE=SOLDER_PASTE 89 | NAME=BOTTOM_PASTE 90 | POLARITY=POSITIVE 91 | START_NAME= 92 | END_NAME= 93 | OLD_NAME= 94 | } 95 | 96 | LAYER { 97 | ROW=9 98 | CONTEXT=BOARD 99 | TYPE=SILK_SCREEN 100 | NAME=BOTTOM_OVERLAY 101 | POLARITY=POSITIVE 102 | START_NAME= 103 | END_NAME= 104 | OLD_NAME= 105 | } 106 | 107 | LAYER { 108 | ROW=10 109 | CONTEXT=BOARD 110 | TYPE=DRILL 111 | NAME=DRILL 112 | POLARITY=POSITIVE 113 | START_NAME=TOP_LAYER 114 | END_NAME=BOTTOM_LAYER 115 | OLD_NAME= 116 | } 117 | 118 | LAYER { 119 | ROW=11 120 | CONTEXT=BOARD 121 | TYPE=SIGNAL 122 | NAME=MID-LAYER_1 123 | POLARITY=POSITIVE 124 | START_NAME= 125 | END_NAME= 126 | OLD_NAME= 127 | } 128 | 129 | LAYER { 130 | ROW=12 131 | CONTEXT=BOARD 132 | TYPE=SIGNAL 133 | NAME=MID-LAYER_2 134 | POLARITY=POSITIVE 135 | START_NAME= 136 | END_NAME= 137 | OLD_NAME= 138 | } 139 | 140 | LAYER { 141 | ROW=13 142 | CONTEXT=MISC 143 | TYPE=DOCUMENT 144 | NAME=KEEP-OUT_LAYER 145 | POLARITY=POSITIVE 146 | START_NAME= 147 | END_NAME= 148 | OLD_NAME= 149 | } 150 | 151 | LAYER { 152 | ROW=14 153 | CONTEXT=MISC 154 | TYPE=DOCUMENT 155 | NAME=MECHANICAL_01_BOARD_OUTLINE 156 | POLARITY=POSITIVE 157 | START_NAME= 158 | END_NAME= 159 | OLD_NAME= 160 | } 161 | 162 | LAYER { 163 | ROW=15 164 | CONTEXT=MISC 165 | TYPE=DOCUMENT 166 | NAME=BRANDING_TOP_OVERLAY 167 | POLARITY=POSITIVE 168 | START_NAME= 169 | END_NAME= 170 | OLD_NAME= 171 | } 172 | 173 | LAYER { 174 | ROW=16 175 | CONTEXT=MISC 176 | TYPE=DOCUMENT 177 | NAME=BOTTOM_3D_BODY 178 | POLARITY=POSITIVE 179 | START_NAME= 180 | END_NAME= 181 | OLD_NAME= 182 | } 183 | 184 | LAYER { 185 | ROW=17 186 | CONTEXT=MISC 187 | TYPE=DOCUMENT 188 | NAME=MECHANICAL_4 189 | POLARITY=POSITIVE 190 | START_NAME= 191 | END_NAME= 192 | OLD_NAME= 193 | } 194 | 195 | LAYER { 196 | ROW=18 197 | CONTEXT=MISC 198 | TYPE=DOCUMENT 199 | NAME=MECHANICAL_5 200 | POLARITY=POSITIVE 201 | START_NAME= 202 | END_NAME= 203 | OLD_NAME= 204 | } 205 | 206 | LAYER { 207 | ROW=19 208 | CONTEXT=MISC 209 | TYPE=DOCUMENT 210 | NAME=MECHANICAL_6 211 | POLARITY=POSITIVE 212 | START_NAME= 213 | END_NAME= 214 | OLD_NAME= 215 | } 216 | 217 | LAYER { 218 | ROW=20 219 | CONTEXT=MISC 220 | TYPE=DOCUMENT 221 | NAME=MECHANICAL_7 222 | POLARITY=POSITIVE 223 | START_NAME= 224 | END_NAME= 225 | OLD_NAME= 226 | } 227 | 228 | LAYER { 229 | ROW=21 230 | CONTEXT=MISC 231 | TYPE=DOCUMENT 232 | NAME=MECHANICAL_8 233 | POLARITY=POSITIVE 234 | START_NAME= 235 | END_NAME= 236 | OLD_NAME= 237 | } 238 | 239 | LAYER { 240 | ROW=22 241 | CONTEXT=MISC 242 | TYPE=DOCUMENT 243 | NAME=MECHANICAL_9 244 | POLARITY=POSITIVE 245 | START_NAME= 246 | END_NAME= 247 | OLD_NAME= 248 | } 249 | 250 | LAYER { 251 | ROW=23 252 | CONTEXT=MISC 253 | TYPE=DOCUMENT 254 | NAME=TOP_ASSEMBLY 255 | POLARITY=POSITIVE 256 | START_NAME= 257 | END_NAME= 258 | OLD_NAME= 259 | } 260 | 261 | LAYER { 262 | ROW=24 263 | CONTEXT=MISC 264 | TYPE=DOCUMENT 265 | NAME=TOP_COMPONENT_OUTLINE 266 | POLARITY=POSITIVE 267 | START_NAME= 268 | END_NAME= 269 | OLD_NAME= 270 | } 271 | 272 | LAYER { 273 | ROW=25 274 | CONTEXT=MISC 275 | TYPE=DOCUMENT 276 | NAME=TOP_3D_BODY 277 | POLARITY=POSITIVE 278 | START_NAME= 279 | END_NAME= 280 | OLD_NAME= 281 | } 282 | 283 | LAYER { 284 | ROW=26 285 | CONTEXT=MISC 286 | TYPE=DOCUMENT 287 | NAME=TOP_COURTYARD 288 | POLARITY=POSITIVE 289 | START_NAME= 290 | END_NAME= 291 | OLD_NAME= 292 | } 293 | 294 | LAYER { 295 | ROW=27 296 | CONTEXT=MISC 297 | TYPE=DOCUMENT 298 | NAME=TOP_DESIGNATOR 299 | POLARITY=POSITIVE 300 | START_NAME= 301 | END_NAME= 302 | OLD_NAME= 303 | } 304 | 305 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/misc/attrlist: -------------------------------------------------------------------------------- 1 | .customer = 2 | .comment = 3 | .technology = 4 | .global_camtek_aoiset = 5 | .drc_route_keepin_lyr = 6 | .drc_comp_keepin_lyr = 7 | .drc_tp_keepin_lyr = 8 | .drc_route_keepout_lyr = 9 | .drc_via_keepout_lyr = 10 | .drc_trace_keepout_lyr = 11 | .drc_trace_keepout_lyr = 12 | .drc_plane_keepout_lyr = 13 | .drc_pad_keepout_lyr = 14 | .drc_comp_keepout_lyr = 15 | .drc_comp_height_lyr = 16 | .drc_tp_keepout_lyr = 17 | .variant_list = 18 | .primary_side = top 19 | .design_origin_x = 0 20 | .design_origin_y = 0 21 | .board_thickness = 0.0618102 22 | _board_material = thermon 23 | 24 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/attrlist: -------------------------------------------------------------------------------- 1 | .out_drill_full = no 2 | .out_drill_optional = no 3 | .out_rout_optional = no 4 | .array_with_rotation = no 5 | .flipped_out_of_date = no 6 | .comment = 7 | .out_name = 8 | .assembly_proc_top = 9 | .assembly_proc_bottom = 10 | .all_eda_layers = 11 | .etm_tester = 12 | .flipped_of = 13 | .pnl_scheme = 14 | .pnl_pcb = 15 | .pnl_class = 16 | .pnl_place = 17 | .fs_direction_top = right2left 18 | .fs_direction_bottom = right2left 19 | .smt_direction_top = right2left 20 | .smt_direction_bottom = right2left 21 | .viacap_layer = none 22 | .etm_pin_style = regular 23 | .etm_repear_fmt = none 24 | .out_drill_order = 0 25 | .out_rout_order = 0 26 | .etm_adapter_h = 3750.000000 27 | .gold_plating = no 28 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_3d_body/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Bottom3DBody" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_3d_body/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32768 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_layer/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "BottomLayer" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0009839 15 | .copper_weight = 1.00489362 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_overlay/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "BottomOverlay" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_overlay/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32896 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_paste/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "BottomPaste" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_paste/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=128 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | @0 .geometry 10 | @1 .pad_usage 11 | 12 | # 13 | #Feature attribute text strings 14 | # 15 | 16 | # 17 | #Layer features 18 | # 19 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_solder/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "BottomSolderMask" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/bottom_solder/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16711935 2 | # 3 | #Feature symbol names 4 | # 5 | $0 s69.0236 6 | $1 r69.0236 7 | $2 r244.2205 8 | $3 r70.5984 9 | $4 s70.5984 10 | $5 r37.5276 11 | 12 | # 13 | #Feature attribute names 14 | # 15 | @0 .geometry 16 | @1 .pad_usage 17 | 18 | # 19 | #Feature attribute text strings 20 | # 21 | &0 Pad_Simple_X61.0236Y61.0236H40.1575C80.1575 22 | &1 Pad_Simple_X236.2205Y236.2205H118.1102C158.1102 23 | &2 Pad_Complex_X62.5984Y62.5984H41.7323C81.7323 24 | &3 VIA_RoundD29.5276H13.7795C53.7795 25 | 26 | # 27 | #Layer features 28 | # 29 | P 0.1574803 0.1574803 2 P 0 0 ;0=1,1=0 30 | P 0.1574803 1.2204724 2 P 0 0 ;0=1,1=0 31 | P 0.4133858 0.2427208 4 P 0 0 ;0=2,1=0 32 | P 0.4133858 0.3427208 3 P 0 0 ;0=2,1=0 33 | P 0.4133858 0.4427208 3 P 0 0 ;0=2,1=0 34 | P 0.4133858 0.5427208 3 P 0 0 ;0=2,1=0 35 | P 0.4133858 0.6427208 3 P 0 0 ;0=2,1=0 36 | P 0.4133858 0.7427208 3 P 0 0 ;0=2,1=0 37 | P 0.4133858 0.8427208 3 P 0 0 ;0=2,1=0 38 | P 0.4133858 0.9427208 3 P 0 0 ;0=2,1=0 39 | P 0.4133858 1.0427208 3 P 0 0 ;0=2,1=0 40 | P 0.4133858 1.1427208 3 P 0 0 ;0=2,1=0 41 | P 1.269 0.1005154 0 P 0 0 ;0=0,1=0 42 | P 1.369 0.1005154 1 P 0 0 ;0=0,1=0 43 | P 2.2047244 0.1574803 2 P 0 0 ;0=1,1=0 44 | P 2.2047244 1.2204724 2 P 0 0 ;0=1,1=0 45 | P 0.0688976 0.1574803 5 P 0 0 ;0=3,1=1 46 | P 0.0688976 1.2204724 5 P 0 0 ;0=3,1=1 47 | P 0.0944882 0.0944882 5 P 0 0 ;0=3,1=1 48 | P 0.0944882 0.2204724 5 P 0 0 ;0=3,1=1 49 | P 0.0944882 1.1574803 5 P 0 0 ;0=3,1=1 50 | P 0.0944882 1.2834645 5 P 0 0 ;0=3,1=1 51 | P 0.1574803 0.0688976 5 P 0 0 ;0=3,1=1 52 | P 0.1574803 0.246063 5 P 0 0 ;0=3,1=1 53 | P 0.1574803 1.1318897 5 P 0 0 ;0=3,1=1 54 | P 0.1574803 1.3090551 5 P 0 0 ;0=3,1=1 55 | P 0.2204724 0.0944882 5 P 0 0 ;0=3,1=1 56 | P 0.2204724 0.2204724 5 P 0 0 ;0=3,1=1 57 | P 0.2204724 1.1574803 5 P 0 0 ;0=3,1=1 58 | P 0.2204724 1.2834645 5 P 0 0 ;0=3,1=1 59 | P 0.2460629 0.1574803 5 P 0 0 ;0=3,1=1 60 | P 0.2460629 1.2204724 5 P 0 0 ;0=3,1=1 61 | P 2.1161417 0.1574803 5 P 0 0 ;0=3,1=1 62 | P 2.1161417 1.2204724 5 P 0 0 ;0=3,1=1 63 | P 2.1417323 0.0944882 5 P 0 0 ;0=3,1=1 64 | P 2.1417323 0.2204724 5 P 0 0 ;0=3,1=1 65 | P 2.1417323 1.1574803 5 P 0 0 ;0=3,1=1 66 | P 2.1417323 1.2834645 5 P 0 0 ;0=3,1=1 67 | P 2.2047244 0.0688976 5 P 0 0 ;0=3,1=1 68 | P 2.2047244 0.246063 5 P 0 0 ;0=3,1=1 69 | P 2.2047244 1.1318897 5 P 0 0 ;0=3,1=1 70 | P 2.2047244 1.3090551 5 P 0 0 ;0=3,1=1 71 | P 2.2677165 0.0944882 5 P 0 0 ;0=3,1=1 72 | P 2.2677165 0.2204724 5 P 0 0 ;0=3,1=1 73 | P 2.2677165 1.1574803 5 P 0 0 ;0=3,1=1 74 | P 2.2677165 1.2834645 5 P 0 0 ;0=3,1=1 75 | P 2.293307 0.1574803 5 P 0 0 ;0=3,1=1 76 | P 2.293307 1.2204724 5 P 0 0 ;0=3,1=1 77 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/branding_top_overlay/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "BrandingTopOverlay" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/branding_top_overlay/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=8388736 2 | # 3 | #Feature symbol names 4 | # 5 | $0 r1.9685 6 | 7 | # 8 | #Feature attribute names 9 | # 10 | 11 | # 12 | #Layer features 13 | # 14 | A 0 0.1574803 0.1574803 0 0.1574803 0.1574803 0 P 0 N 15 | A 0.1574803 1.3779527 0 1.2204724 0.1574803 1.2204724 0 P 0 N 16 | A 2.2047244 0 2.3622047 0.1574803 2.2047244 0.1574803 0 P 0 N 17 | A 2.3622047 1.2204724 2.2047244 1.3779527 2.2047244 1.2204724 0 P 0 N 18 | L -0.0000002 1.2204724 0 0.1574803 0 P 0 19 | L 0.1574803 -0.0000003 2.2047244 -0.0000002 0 P 0 20 | L 0.1574803 1.3779528 2.2047244 1.3779528 0 P 0 21 | L 2.3622047 0.1574803 2.3622047 1.2204724 0 P 0 22 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/comp_+_top/components: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/comp_+_top/components -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/comp_+_top/features: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/comp_+_top/features -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/drill/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/drill/tools: -------------------------------------------------------------------------------- 1 | THICKNESS=0 2 | USER_PARAMS= 3 | 4 | TOOLS { 5 | NUM=1 6 | TYPE=VIA 7 | MIN_TOL=0 8 | MAX_TOL=0 9 | BIT= 10 | FINISH_SIZE=10 11 | DRILL_SIZE=10 12 | } 13 | 14 | TOOLS { 15 | NUM=2 16 | TYPE=VIA 17 | MIN_TOL=0 18 | MAX_TOL=0 19 | BIT= 20 | FINISH_SIZE=13.7795 21 | DRILL_SIZE=13.7795 22 | } 23 | 24 | TOOLS { 25 | NUM=3 26 | TYPE=PLATED 27 | MIN_TOL=0 28 | MAX_TOL=0 29 | BIT= 30 | FINISH_SIZE=40.1575 31 | DRILL_SIZE=40.1575 32 | } 33 | 34 | TOOLS { 35 | NUM=4 36 | TYPE=PLATED 37 | MIN_TOL=0 38 | MAX_TOL=0 39 | BIT= 40 | FINISH_SIZE=41.7323 41 | DRILL_SIZE=41.7323 42 | } 43 | 44 | TOOLS { 45 | NUM=5 46 | TYPE=PLATED 47 | MIN_TOL=0 48 | MAX_TOL=0 49 | BIT= 50 | FINISH_SIZE=118.1102 51 | DRILL_SIZE=118.1102 52 | } 53 | 54 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/keep-out_layer/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "KeepOutLayer" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/keep-out_layer/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16711935 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_01_board_outline/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical01BoardOutline" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_4/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical4" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_4/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32896 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_5/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical5" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_5/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16711935 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_6/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical6" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_6/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=8388736 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_7/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical7" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_7/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32768 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_8/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical8" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_8/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32896 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_9/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mechanical9" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mechanical_9/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16711935 2 | # 3 | #Feature symbol names 4 | # 5 | 6 | # 7 | #Feature attribute names 8 | # 9 | 10 | # 11 | #Layer features 12 | # 13 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mid-layer_1/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mid-Layer1" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0126 15 | .copper_weight = 0.9929078 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mid-layer_1/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=36540 2 | # 3 | #Feature symbol names 4 | # 5 | $0 r1.9685 6 | 7 | # 8 | #Feature attribute names 9 | # 10 | @0 .geometry 11 | @1 .pad_usage 12 | 13 | # 14 | #Feature attribute text strings 15 | # 16 | 17 | # 18 | #Layer features 19 | # 20 | A 0 0.1574803 0.1574803 0 0.1574803 0.1574803 0 P 0 N 21 | A 0.1574803 1.3779527 0 1.2204724 0.1574803 1.2204724 0 P 0 N 22 | A 2.2047244 0 2.3622047 0.1574803 2.2047244 0.1574803 0 P 0 N 23 | A 2.3622047 1.2204724 2.2047244 1.3779527 2.2047244 1.2204724 0 P 0 N 24 | L -0.0000002 1.2204724 0 0.1574803 0 P 0 25 | L 0.1574803 -0.0000003 2.2047244 -0.0000002 0 P 0 26 | L 0.1574803 1.3779528 2.2047244 1.3779528 0 P 0 27 | L 2.3622047 0.1574803 2.3622047 1.2204724 0 P 0 28 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mid-layer_2/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Mid-Layer2" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0126 15 | .copper_weight = 0.9929078 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/mid-layer_2/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16440176 2 | # 3 | #Feature symbol names 4 | # 5 | $0 r1.9685 6 | 7 | # 8 | #Feature attribute names 9 | # 10 | @0 .geometry 11 | @1 .pad_usage 12 | 13 | # 14 | #Feature attribute text strings 15 | # 16 | 17 | # 18 | #Layer features 19 | # 20 | A 0 0.1574803 0.1574803 0 0.1574803 0.1574803 0 P 0 N 21 | A 0.1574803 1.3779527 0 1.2204724 0.1574803 1.2204724 0 P 0 N 22 | A 2.2047244 0 2.3622047 0.1574803 2.2047244 0.1574803 0 P 0 N 23 | A 2.3622047 1.2204724 2.2047244 1.3779527 2.2047244 1.2204724 0 P 0 N 24 | L -0.0000002 1.2204724 0 0.1574803 0 P 0 25 | L 0.1574803 -0.0000003 2.2047244 -0.0000002 0 P 0 26 | L 0.1574803 1.3779528 2.2047244 1.3779528 0 P 0 27 | L 2.3622047 0.1574803 2.3622047 1.2204724 0 P 0 28 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_3d_body/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "Top3DBody" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_3d_body/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=16711935 2 | # 3 | #Feature symbol names 4 | # 5 | $0 r3.937 6 | 7 | # 8 | #Feature attribute names 9 | # 10 | 11 | # 12 | #Layer features 13 | # 14 | L 1.2115197 0.0505154 1.2115197 0.1505154 0 P 0 15 | L 1.2115197 0.0505154 1.4264803 0.0505154 0 P 0 16 | L 1.2115197 0.1505154 1.4264803 0.1505154 0 P 0 17 | L 1.4264803 0.0505154 1.4264803 0.1505154 0 P 0 18 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_assembly/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopAssembly" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_assembly/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=32768 2 | # 3 | #Feature symbol names 4 | # 5 | $0 r4.7244 6 | $1 r3.937 7 | $2 r1.9685 8 | 9 | # 10 | #Feature attribute names 11 | # 12 | 13 | # 14 | #Layer features 15 | # 16 | L 0.0905227 0.3946644 0.0905227 0.4314097 0 P 0 17 | L 0.0905227 0.3946644 0.1088955 0.3762915 0 P 0 18 | L 0.0905227 0.4314097 0.2086329 0.4314097 0 P 0 19 | L 0.1029134 0.6022679 0.1029134 0.9172285 0 P 0 20 | L 0.1029134 0.6022679 0.2170866 0.6022679 0 P 0 21 | L 0.1029134 0.9172285 0.2170866 0.9172285 0 P 0 22 | L 0.1088955 0.3762915 0.2086329 0.3762915 0 P 0 23 | L 0.1204439 0.377079 0.1298927 0.3959766 0 P 0 24 | L 0.1220187 0.3999136 0.1377667 0.3920396 0 P 0 25 | L 0.1220187 0.3999136 0.1377667 0.4117246 0 P 0 26 | L 0.1223315 0.503714 0.1223315 0.5572574 0 P 0 27 | L 0.1223315 0.503714 0.2089457 0.503714 0 P 0 28 | L 0.1223315 0.5572574 0.2089457 0.5572574 0 P 0 29 | L 0.1298927 0.4156616 0.1456408 0.4077876 0 P 0 30 | L 0.1377667 0.3920396 0.1377667 0.4117246 0 P 0 31 | L 0.1377667 0.4117246 0.1472156 0.4306223 0 P 0 32 | L 0.1691134 0.661323 0.2018453 0.6424254 0 P 0 33 | L 0.1691134 0.661323 0.2018453 0.6802206 0 P 0 34 | L 0.2018453 0.6424254 0.2018453 0.6802206 0 P 0 35 | L 0.2086329 0.3762915 0.2086329 0.4314097 0 P 0 36 | L 0.2089457 0.503714 0.2089457 0.5572574 0 P 0 37 | L 0.2170866 0.6022679 0.2170866 0.9172285 0 P 0 38 | L 0.3633858 0.2883901 0.3633858 1.0970515 0 P 0 39 | L 0.3633858 0.2883901 0.4633858 0.2883901 0 P 0 40 | L 0.3633858 1.0970515 0.4633858 1.0970515 0 P 0 41 | L 0.3693757 0.0902286 0.3693757 0.1319608 0 P 0 42 | L 0.3693757 0.0902286 0.3914229 0.0902286 0 P 0 43 | L 0.3693757 0.1319608 0.3914229 0.1319608 0 P 0 44 | L 0.3914229 0.0902286 0.3914229 0.1319608 0 P 0 45 | L 0.4633858 0.2883901 0.4633858 1.0970515 0 P 0 46 | L 0.4877428 0.0570866 0.4877428 0.1791338 0 P 0 47 | L 0.4877428 0.0570866 0.558609 0.0570866 0 P 0 48 | L 0.4877428 0.1791338 0.558609 0.1791338 0 P 0 49 | L 0.4917274 0.2091981 0.4917274 0.2328201 0 P 0 50 | L 0.4917274 0.2091981 0.5350344 0.2091981 0 P 0 51 | L 0.4917274 0.2328201 0.5350344 0.2328201 0 P 0 52 | L 0.4992558 0.2697327 0.4992558 0.2917799 0 P 0 53 | L 0.4992558 0.2697327 0.540988 0.2697327 0 P 0 54 | L 0.4992558 0.2917799 0.540988 0.2917799 0 P 0 55 | L 0.5350344 0.2091981 0.5350344 0.2328201 0 P 0 56 | L 0.540988 0.2697327 0.540988 0.2917799 0 P 0 57 | L 0.558609 0.0570866 0.558609 0.1791338 0 P 0 58 | L 0.5593602 0.452756 0.5593602 0.925197 0 P 0 59 | L 0.5593602 0.452756 0.6747146 0.452756 0 P 0 60 | L 0.5593602 0.925197 0.6747146 0.925197 0 P 0 61 | L 0.5724489 0.2563307 0.5724489 0.2917637 0 P 0 62 | L 0.5724489 0.2563307 0.611819 0.2563307 0 P 0 63 | L 0.5724489 0.2917637 0.6236301 0.2917637 0 P 0 64 | L 0.5824779 1.1970465 0.5824779 1.2364165 2 P 0 65 | L 0.5824779 1.1970465 0.6887771 1.1970465 2 P 0 66 | L 0.5824779 1.2364165 0.6887771 1.2364165 2 P 0 67 | L 0.611819 0.2563307 0.6236301 0.2681417 0 P 0 68 | L 0.6203792 0.5115134 0.6556682 0.4911393 0 P 0 69 | L 0.6203792 0.5115134 0.6556682 0.5318874 0 P 0 70 | L 0.6236301 0.2681417 0.6236301 0.2917637 0 P 0 71 | L 0.6413704 0.094433 0.6413704 0.1361652 0 P 0 72 | L 0.6413704 0.094433 0.6634176 0.094433 0 P 0 73 | L 0.6413704 0.1361652 0.6634176 0.1361652 0 P 0 74 | L 0.6556682 0.4911393 0.6556682 0.5318874 0 P 0 75 | L 0.6634176 0.094433 0.6634176 0.1361652 0 P 0 76 | L 0.6747146 0.452756 0.6747146 0.925197 0 P 0 77 | L 0.6887771 1.1970465 0.6887771 1.2364165 2 P 0 78 | L 0.8370347 0.0317599 0.8370347 0.1616811 0 P 0 79 | L 0.8370347 0.0317599 1.0063261 0.0317599 0 P 0 80 | L 0.8370347 0.1616811 1.0063261 0.1616811 0 P 0 81 | L 0.8447868 0.9330709 0.8447868 1.2716535 0 P 0 82 | L 0.8447868 0.9330709 0.923527 0.9330709 0 P 0 83 | L 0.8447868 1.2716535 0.923527 1.2716535 0 P 0 84 | L 0.8744999 0.2840157 0.8744999 0.5359843 0 P 0 85 | L 0.8744999 0.2840157 1.1028463 0.2840157 0 P 0 86 | L 0.8744999 0.5359843 1.1028463 0.5359843 0 P 0 87 | L 0.8809955 0.992126 0.9086124 0.9761811 0 P 0 88 | L 0.8809955 0.992126 0.9086124 1.0080709 0 P 0 89 | L 0.9086124 0.9761811 0.9086124 1.0080709 0 P 0 90 | L 0.923527 0.9330709 0.923527 1.2716535 0 P 0 91 | L 1.0063261 0.0317599 1.0063261 0.1616811 0 P 0 92 | L 1.027244 0.3105906 1.0548609 0.2946457 0 P 0 93 | L 1.027244 0.3105906 1.0548609 0.3265355 0 P 0 94 | L 1.0548609 0.2946457 1.0548609 0.3265355 0 P 0 95 | L 1.1028463 0.2840157 1.1028463 0.5359843 0 P 0 96 | L 1.125 0.6 1.125 1.2 0 P 0 97 | L 1.125 0.6 1.225 0.6 0 P 0 98 | L 1.125 1.2 1.225 1.2 0 P 0 99 | L 1.1787354 1.15 1.2140244 1.129626 0 P 0 100 | L 1.1787354 1.15 1.2140244 1.170374 0 P 0 101 | L 1.2138819 0.0532713 1.2138819 0.1477595 1 P 0 102 | L 1.2138819 0.0532713 1.4225433 0.0532713 1 P 0 103 | L 1.2138819 0.1477595 1.4225433 0.1477595 1 P 0 104 | L 1.2140244 1.129626 1.2140244 1.170374 0 P 0 105 | L 1.2217559 0.0532713 1.2217559 0.1477595 1 P 0 106 | L 1.225 0.6 1.225 1.2 0 P 0 107 | L 1.4225433 0.0532713 1.4225433 0.1477595 1 P 0 108 | L 1.4523228 0.0389764 1.4523228 1.3389764 0 P 0 109 | L 1.4523228 0.0389764 1.8176772 0.0389764 0 P 0 110 | L 1.4523228 1.3389764 1.8176772 1.3389764 0 P 0 111 | L 1.7384984 0.1653544 1.7993587 0.1302166 0 P 0 112 | L 1.7384984 0.1653544 1.7993587 0.2004921 0 P 0 113 | L 1.7993587 0.1302166 1.7993587 0.2004921 0 P 0 114 | L 1.8176772 0.0389764 1.8176772 1.3389764 0 P 0 115 | L 2.0429133 0.4291339 2.0429133 0.9478347 0 P 0 116 | L 2.0429133 0.4291339 2.3059055 0.4291339 0 P 0 117 | L 2.0429133 0.9478347 2.3059055 0.9478347 0 P 0 118 | L 2.1442699 0.993328 2.1442699 1.032698 2 P 0 119 | L 2.1442699 0.993328 2.2505691 0.993328 2 P 0 120 | L 2.1442699 1.032698 2.2505691 1.032698 2 P 0 121 | L 2.2240188 0.4675196 2.2669791 0.4427165 0 P 0 122 | L 2.2240188 0.4675196 2.2669791 0.4923228 0 P 0 123 | L 2.2505691 0.993328 2.2505691 1.032698 2 P 0 124 | L 2.2669791 0.4427165 2.2669791 0.4923228 0 P 0 125 | L 2.3059055 0.4291339 2.3059055 0.9478347 0 P 0 126 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_component_outline/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopComponentOutline" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_courtyard/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopCourtyard" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_designator/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopDesignator" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_layer/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopLayer" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0589764 15 | .copper_weight = 1.00489362 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_overlay/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopOverlay" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_paste/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopPaste" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_paste/features: -------------------------------------------------------------------------------- 1 | #Layer_Color=8421504 2 | # 3 | #Feature symbol names 4 | # 5 | $0 rect39.3701x29.5276xr7.0866 6 | $1 rect63.3858x23.2283xr5.9232 7 | $2 rect24.0157x39.7638xr5.8838 8 | $3 rect18.8976x15.748xr3.937 9 | $4 s3.937 10 | $5 rect135x50xr12.5 11 | $6 rect200x50xr12.5 12 | $7 rect110x29.0157xr7.2539 13 | $8 rect38.9764x54.3307xr9.939 14 | $9 rect22.8346x15.748xr3.937 15 | $10 rect133.8583x70.8661xr17.7165 16 | $11 rect70.8661x47.2441xr11.811 17 | $12 rect61.0236x23.622xr5.9055 18 | $13 rect43.3071x19.685xr4.9212 19 | $14 rect66.9291x47.2441xr11.811 20 | $15 rect110x29xr7.25 21 | $16 rect24.8031x24.0157xr5.8838 22 | $17 rect15.748x22.8346xr3.937 23 | 24 | # 25 | #Feature attribute names 26 | # 27 | @0 .geometry 28 | @1 .pad_usage 29 | 30 | # 31 | #Feature attribute text strings 32 | # 33 | &0 SMD_RoundRectX39.3701Y29.5276 34 | &1 SMD_RoundRectX63.3858Y23.2283 35 | &2 SMD_RoundRectX24.0157Y39.7638 36 | &3 SMD_RoundRectX18.8976Y15.7480 37 | &4 SMD_SquareX3.9370Y3.9370 38 | &5 SMD_RoundRectX135.0000Y50.0000 39 | &6 SMD_RoundRectX200.0000Y50.0000 40 | &7 SMD_RoundRectX110.0000Y29.0157 41 | &8 SMD_RoundRectX38.9764Y54.3307 42 | &9 SMD_RoundRectX22.8346Y15.7480 43 | &10 SMD_RoundRectX133.8583Y70.8661 44 | &11 SMD_RoundRectX70.8661Y47.2441 45 | &12 SMD_RoundRectX61.0236Y23.6220 46 | &13 SMD_RoundRectX43.3071Y19.6850 47 | &14 SMD_RoundRectX66.9291Y47.2441 48 | &15 SMD_RoundRectX110.0000Y29.0000 49 | &16 SMD_RoundRectX24.8031Y24.0157 50 | &17 SMD_RoundRectX15.7480Y22.8346 51 | 52 | # 53 | #Layer features 54 | # 55 | P 0.1121762 0.3662522 2 P 0 0 ;0=2,1=0 56 | P 0.129615 0.5304857 8 P 0 0 ;0=8,1=0 57 | P 0.1304724 0.6101419 11 P 0 0 ;0=11,1=0 58 | P 0.1304724 0.9093545 11 P 0 0 ;0=11,1=0 59 | P 0.1495778 0.441449 2 P 0 0 ;0=2,1=0 60 | P 0.1869794 0.3662522 2 P 0 0 ;0=2,1=0 61 | P 0.2016622 0.5304857 8 P 0 0 ;0=8,1=0 62 | P 0.2298819 0.661323 12 P 0 0 ;0=12,1=0 63 | P 0.2298819 0.7006931 12 P 0 0 ;0=12,1=0 64 | P 0.2298819 0.7400632 12 P 0 0 ;0=12,1=0 65 | P 0.2298819 0.7794332 12 P 0 0 ;0=12,1=0 66 | P 0.2298819 0.8188033 12 P 0 0 ;0=12,1=0 67 | P 0.2298819 0.8581734 12 P 0 0 ;0=12,1=0 68 | P 0.3803993 0.0933782 9 P 0 0 ;0=9,1=0 69 | P 0.3803993 0.1288112 9 P 0 0 ;0=9,1=0 70 | P 0.4780972 0.0807086 1 P 0 0 ;0=1,1=0 71 | P 0.4780972 0.1181102 1 P 0 0 ;0=1,1=0 72 | P 0.4780972 0.1555118 1 P 0 0 ;0=1,1=0 73 | P 0.4956644 0.2210091 16 P 0 0 ;0=16,1=0 74 | P 0.5024054 0.2807563 17 P 0 0 ;0=17,1=0 75 | P 0.5310974 0.2210091 16 P 0 0 ;0=16,1=0 76 | P 0.5378384 0.2807563 17 P 0 0 ;0=17,1=0 77 | P 0.5629014 0.3683001 4 P 0 0 ;0=4,1=0 78 | P 0.5682546 0.0807086 1 P 0 0 ;0=1,1=0 79 | P 0.5682546 0.1555118 1 P 0 0 ;0=1,1=0 80 | P 0.5720552 0.2740472 3 P 0 0 ;0=3,1=0 81 | P 0.5869193 0.46063 11 P 0 0 ;0=11,1=0 82 | P 0.5869193 0.917323 11 P 0 0 ;0=11,1=0 83 | P 0.6240238 0.2740472 3 P 0 0 ;0=3,1=0 84 | P 0.6356275 1.2167315 10 P 0 0 ;0=10,1=0 85 | P 0.6416416 0.3683001 4 P 0 0 ;0=4,1=0 86 | P 0.652394 0.0975826 9 P 0 0 ;0=9,1=0 87 | P 0.652394 0.1330156 9 P 0 0 ;0=9,1=0 88 | P 0.6863287 0.5118111 12 P 0 0 ;0=12,1=0 89 | P 0.6863287 0.5511812 12 P 0 0 ;0=12,1=0 90 | P 0.6863287 0.5905513 12 P 0 0 ;0=12,1=0 91 | P 0.6863287 0.6299214 12 P 0 0 ;0=12,1=0 92 | P 0.6863287 0.6692915 12 P 0 0 ;0=12,1=0 93 | P 0.6863287 0.7086615 12 P 0 0 ;0=12,1=0 94 | P 0.6863287 0.7480316 12 P 0 0 ;0=12,1=0 95 | P 0.6863287 0.7874017 12 P 0 0 ;0=12,1=0 96 | P 0.6863287 0.8267718 12 P 0 0 ;0=12,1=0 97 | P 0.6863287 0.8661419 12 P 0 0 ;0=12,1=0 98 | P 0.841956 0.0553819 0 P 0 0 ;0=0,1=0 99 | P 0.841956 0.1390433 0 P 0 0 ;0=0,1=0 100 | P 0.8664404 0.9409449 14 P 0 0 ;0=14,1=0 101 | P 0.8664404 1.2637796 14 P 0 0 ;0=14,1=0 102 | P 0.9086731 0.31 15 P 0 0 ;0=15,1=0 103 | P 0.9086731 0.36 15 P 0 0 ;0=15,1=0 104 | P 0.9086731 0.41 15 P 0 0 ;0=15,1=0 105 | P 0.9086731 0.46 15 P 0 0 ;0=15,1=0 106 | P 0.9086731 0.51 15 P 0 0 ;0=15,1=0 107 | P 0.9215585 0.992126 13 P 0 0 ;0=13,1=0 108 | P 0.9215585 1.0236221 13 P 0 0 ;0=13,1=0 109 | P 0.9215585 1.0551181 13 P 0 0 ;0=13,1=0 110 | P 0.9215585 1.0866142 13 P 0 0 ;0=13,1=0 111 | P 0.9215585 1.1181103 13 P 0 0 ;0=13,1=0 112 | P 0.9215585 1.1496063 13 P 0 0 ;0=13,1=0 113 | P 0.9215585 1.1811024 13 P 0 0 ;0=13,1=0 114 | P 0.9215585 1.2125985 13 P 0 0 ;0=13,1=0 115 | P 1.0014048 0.0543977 0 P 0 0 ;0=0,1=0 116 | P 1.0014048 0.1390433 0 P 0 0 ;0=0,1=0 117 | P 1.0686731 0.31 15 P 0 0 ;0=15,1=0 118 | P 1.0686731 0.36 15 P 0 0 ;0=15,1=0 119 | P 1.0686731 0.41 15 P 0 0 ;0=15,1=0 120 | P 1.0686731 0.46 15 P 0 0 ;0=15,1=0 121 | P 1.0686731 0.51 15 P 0 0 ;0=15,1=0 122 | P 1.1175 0.65 5 P 0 0 ;0=5,1=0 123 | P 1.1175 0.85 5 P 0 0 ;0=5,1=0 124 | P 1.1175 1.05 5 P 0 0 ;0=5,1=0 125 | P 1.2325 0.75 5 P 0 0 ;0=5,1=0 126 | P 1.2325 0.95 5 P 0 0 ;0=5,1=0 127 | P 1.2325 1.15 5 P 0 0 ;0=5,1=0 128 | P 1.4999606 0.2389764 6 P 0 0 ;0=6,1=0 129 | P 1.4999606 0.3389764 6 P 0 0 ;0=6,1=0 130 | P 1.4999606 0.4389764 6 P 0 0 ;0=6,1=0 131 | P 1.4999606 0.5389764 6 P 0 0 ;0=6,1=0 132 | P 1.4999606 0.6389764 6 P 0 0 ;0=6,1=0 133 | P 1.4999606 0.7389764 6 P 0 0 ;0=6,1=0 134 | P 1.4999606 0.8389764 6 P 0 0 ;0=6,1=0 135 | P 1.4999606 0.9389764 6 P 0 0 ;0=6,1=0 136 | P 1.4999606 1.0389764 6 P 0 0 ;0=6,1=0 137 | P 1.4999606 1.1389764 6 P 0 0 ;0=6,1=0 138 | P 1.7700394 0.2389764 6 P 0 0 ;0=6,1=0 139 | P 1.7700394 0.3389764 6 P 0 0 ;0=6,1=0 140 | P 1.7700394 0.4389764 6 P 0 0 ;0=6,1=0 141 | P 1.7700394 0.5389764 6 P 0 0 ;0=6,1=0 142 | P 1.7700394 0.6389764 6 P 0 0 ;0=6,1=0 143 | P 1.7700394 0.7389764 6 P 0 0 ;0=6,1=0 144 | P 1.7700394 0.8389764 6 P 0 0 ;0=6,1=0 145 | P 1.7700394 0.9389764 6 P 0 0 ;0=6,1=0 146 | P 1.7700394 1.0389764 6 P 0 0 ;0=6,1=0 147 | P 1.7700394 1.1389764 6 P 0 0 ;0=6,1=0 148 | P 2.0942519 0.4639764 7 P 0 0 ;0=7,1=0 149 | P 2.0942519 0.5139764 7 P 0 0 ;0=7,1=0 150 | P 2.0942519 0.5639764 7 P 0 0 ;0=7,1=0 151 | P 2.0942519 0.6139764 7 P 0 0 ;0=7,1=0 152 | P 2.0942519 0.6639764 7 P 0 0 ;0=7,1=0 153 | P 2.0942519 0.7139764 7 P 0 0 ;0=7,1=0 154 | P 2.0942519 0.7639764 7 P 0 0 ;0=7,1=0 155 | P 2.0942519 0.8139764 7 P 0 0 ;0=7,1=0 156 | P 2.0942519 0.8639764 7 P 0 0 ;0=7,1=0 157 | P 2.0942519 0.9139764 7 P 0 0 ;0=7,1=0 158 | P 2.1974195 1.013013 10 P 0 0 ;0=10,1=0 159 | P 2.2545669 0.4639764 7 P 0 0 ;0=7,1=0 160 | P 2.2545669 0.5139764 7 P 0 0 ;0=7,1=0 161 | P 2.2545669 0.5639764 7 P 0 0 ;0=7,1=0 162 | P 2.2545669 0.6139764 7 P 0 0 ;0=7,1=0 163 | P 2.2545669 0.6639764 7 P 0 0 ;0=7,1=0 164 | P 2.2545669 0.7139764 7 P 0 0 ;0=7,1=0 165 | P 2.2545669 0.7639764 7 P 0 0 ;0=7,1=0 166 | P 2.2545669 0.8139764 7 P 0 0 ;0=7,1=0 167 | P 2.2545669 0.8639764 7 P 0 0 ;0=7,1=0 168 | P 2.2545669 0.9139764 7 P 0 0 ;0=7,1=0 169 | S P 0 170 | OB 0.5904605 0.32893 I 171 | OS 0.5865828 0.32893 172 | OS 0.5789766 0.3304429 173 | OS 0.5718117 0.3334107 174 | OS 0.5653635 0.3377193 175 | OS 0.5598797 0.3432031 176 | OS 0.5555711 0.3496513 177 | OS 0.5526033 0.3568162 178 | OS 0.5510904 0.3644224 179 | OS 0.5510904 0.3683001 180 | OS 0.5510904 0.3721777 181 | OS 0.5526033 0.3797839 182 | OS 0.5555711 0.3869488 183 | OS 0.5598797 0.393397 184 | OS 0.5653635 0.3988808 185 | OS 0.5718117 0.4031894 186 | OS 0.5789766 0.4061572 187 | OS 0.5865828 0.4076702 188 | OS 0.5904605 0.4076702 189 | OS 0.5904605 0.4076702 190 | OS 0.5904605 0.32893 191 | OE 192 | SE 193 | S P 0 194 | OB 0.6140825 0.32893 I 195 | OS 0.6140825 0.4076702 196 | OS 0.6179601 0.4076702 197 | OS 0.6255663 0.4061572 198 | OS 0.6327312 0.4031894 199 | OS 0.6391794 0.3988808 200 | OS 0.6446632 0.393397 201 | OS 0.6489718 0.3869488 202 | OS 0.6519396 0.3797839 203 | OS 0.6534526 0.3721777 204 | OS 0.6534526 0.3683001 205 | OS 0.6534526 0.3644224 206 | OS 0.6519396 0.3568162 207 | OS 0.6489718 0.3496513 208 | OS 0.6446632 0.3432031 209 | OS 0.6391794 0.3377193 210 | OS 0.6327312 0.3334107 211 | OS 0.6255663 0.3304429 212 | OS 0.6179601 0.32893 213 | OS 0.6140825 0.32893 214 | OS 0.6140825 0.32893 215 | OE 216 | SE 217 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/layers/top_solder/attrlist: -------------------------------------------------------------------------------- 1 | .out_mirror = no 2 | .lpol_done = no 3 | .cu_base = no 4 | .comment = 5 | .inp_file = 6 | .eda_layers = "TopSolderMask" 7 | .out_angle = 0.0 8 | .out_polarity = positive 9 | .layer_hdi_type = buildup 10 | .out_x_scale = 1.000000 11 | .out_y_scale = 1.000000 12 | .out_comp = 0.000000 13 | .et_adjacency = 20.000000 14 | .layer_dielectric = 0.0001 15 | .copper_weight = 1 16 | 17 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/odb/steps/pcb/stephdr: -------------------------------------------------------------------------------- 1 | X_DATUM=0.0000 2 | Y_DATUM=0.0000 3 | 4 | TOP_ACTIVE=0 5 | BOTTOM_ACTIVE=0 6 | RIGHT_ACTIVE=0 7 | LEFT_ACTIVE=0 8 | ONLINE_DRC_NAME= 9 | ONLINE_DRC_MODE=DISABLED 10 | ONLINE_DRC_STAT=RED 11 | ONLINE_DRC_TIME=0 12 | ONLINE_DRC_BEEP_VOL=2 13 | ONLINE_DRC_BEEP_TONE=500 14 | ONLINE_NET_MODE=DISABLED 15 | ONLINE_NET_STAT=RED 16 | ONLINE_NET_TIME=0 17 | ONLINE_NET_BEEP_VOL=2 18 | ONLINE_NET_BEEP_TONE=1000 19 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/pixhawk_debug_adapter_mini.tgz: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/ODB/pixhawk_debug_adapter_mini.tgz -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/ODB/pixhawk_debug_adapter_mini.zip: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/ODB/pixhawk_debug_adapter_mini.zip -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/Pick Place/Pick Place for pixhawk_debug_adapter_mini(Production).txt: -------------------------------------------------------------------------------- 1 | Altium Designer Pick and Place Locations 2 | C:\Users\Public\Documents\Altium\AD17\Workspace\Auterion\Auterion-Hardware-Reference-Designs\pixhawk_debug\Proto1\Project Outputs for pixhawk_debug_adapter_mini\Pick Place\Pick Place for pixhawk_debug_adapter_mini(Production).txt 3 | 4 | ======================================================================================================================== 5 | File Design Information: 6 | 7 | Date: 17/05/20 8 | Time: 09:56 9 | Revision: 501b0011742170e91d6426f767c7254f36f2466d 10 | Variant: Production 11 | Units used: mil 12 | 13 | Designator Comment Layer Footprint Center-X(mil) Center-Y(mil) Rotation Description 14 | SW1 "SWITCH TACTILE SPST-NO 0.05A 12V SMT" TopLayer SWITCH_SON4P450_420X320X250L75X100N 921.680 96.721 270 "SWITCH TACTILE SPST-NO 0.05A 12V SMT" 15 | JP1 "JUMPER SHORTING BAR 2MM PAD" TopLayer SHORTING_JUMPER_2MM 602.271 368.300 180 "JUMPER SHORTING BAR 2MM PAD" 16 | J5 "CONN HEADER 10POS DUAL .05" SMD" TopLayer FTSH-105-01-XXX-DV-K 988.673 410.000 90 "CONN HEADER 10POS DUAL .05" SMD" 17 | J3 CONN_HDR_2X10_MALE_2.54MM_SHR_SAMTEC_SMD TopLayer SAMTEC_HTST-110-01-F-DV 1635.000 688.976 90 CONN_HDR_2X10_MALE_2.54MM_SHR_SAMTEC_SMD 18 | GND "TESTPOINT MINIATURE SMD" TopLayer KSTN-5015 635.628 1216.732 180 "TESTPOINT MINIATURE SMD" 19 | J2 "CONN HEADER SUR 8POS .8MM VERT SMT" TopLayer JST_BM08B-SURS-TFLFSN 893.999 1102.362 90 "CONN HEADER SUR 8POS .8MM VERT SMT" 20 | U1 "IC GATE AND 1CH 2-INP 5-TSOP" TopLayer SOT23-5P95_270X145L35X35N 523.176 118.110 0 "IC GATE AND 1CH 2-INP 5-TSOP" 21 | R1 "RES SMD 68 OHM 1% 1/8W 0805" TopLayer RESC200X125X70L40N 165.639 530.486 180 "RES SMD 68 OHM 1% 1/8W 0805" 22 | J1 CONN_HDR_2X10_VERT_SHROUD_FTSH_1.27MM_SMT TopLayer SAMTEC_FTSH-110-01-L-DV-K-TR 2174.409 688.976 90 CONN_HDR_2X10_VERT_SHROUD_FTSH_1.27MM_SMT 23 | D1 "DIODE ZENER 5.1V 225MW SOT23-3" TopLayer SOT23-3P95_230X110L30X43N_DIODE 149.578 403.851 360 "DIODE ZENER 5.1V 225MW SOT23-3" 24 | D2 "DIODE SCHOTTKY 70V 70MA SOD523" TopLayer SODFL120X80X70L30X30 598.039 274.047 180 "DIODE SCHOTTKY 70V 70MA SOD523" 25 | R4 "RES SMD 100K OHM 1% 1/16W 0402" TopLayer RESC100X50X40L25 380.399 111.095 270 "RES SMD 100K OHM 1% 1/16W 0402" 26 | M1 "MOUNT HOLE 3MM 8VIAS THMOUNT_HOLE_3MM_TH" TopLayer MOUNT_HOLE_3MM_8VIA_TH 157.480 157.480 0 "MOUNT HOLE 3MM 8VIAS TH" 27 | M3 "MOUNT HOLE 3MM 8VIAS THMOUNT_HOLE_3MM_TH" TopLayer MOUNT_HOLE_3MM_8VIA_TH 2204.724 1220.472 0 "MOUNT HOLE 3MM 8VIAS TH" 28 | J4 "CONN HEADER SH 10POS TOP 1MM TIN" TopLayer JST_BM10B-SRSS-TB 636.624 688.976 90 "CONN HEADER SH 10POS TOP 1MM TIN" 29 | M4 "MOUNT HOLE 3MM 8VIAS THMOUNT_HOLE_3MM_TH" TopLayer MOUNT_HOLE_3MM_8VIA_TH 2204.724 157.480 0 "MOUNT HOLE 3MM 8VIAS TH" 30 | M2 "MOUNT HOLE 3MM 8VIAS THMOUNT_HOLE_3MM_TH" TopLayer MOUNT_HOLE_3MM_8VIA_TH 157.480 1220.472 0 "MOUNT HOLE 3MM 8VIAS TH" 31 | C1 "CAP CER 0.1UF 10% 50V X5R 0402" TopLayer CAPC100X50X56L25N 513.381 221.009 180 "CAP CER 0.1UF 10% 50V X5R 0402" 32 | R3 "RES SMD 10K OHM 1% 1/16W 0402" TopLayer RESC100X50X40L25 652.394 115.299 270 "RES SMD 10K OHM 1% 1/16W 0402" 33 | R2 "RES SMD 10K OHM 1% 1/16W 0402" TopLayer RESC100X50X40L25 520.122 280.756 360 "RES SMD 10K OHM 1% 1/16W 0402" 34 | J7 "CONN HEADER SH 6POS TOP 1MM TIN" TopLayer JST_BM06B-SRSS-TB 180.177 759.748 90 "CONN HEADER SH 6POS TOP 1MM TIN" 35 | J9 "CONN HEADER 6POS 0.100" (2.54mm) SMD" TopLayer SAMTEC_TSM-106-01-XX-SV 1175.000 900.000 90 "CONN HEADER 6POS 0.100" (2.54mm) SMD" 36 | -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/pixhawk_debug_adapter_mini_Fab.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/pixhawk_debug_adapter_mini_Fab.PDF -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/Project Outputs/pixhawk_debug_adapter_mini_Schem.PDF: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/Project Outputs/pixhawk_debug_adapter_mini_Schem.PDF -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.BomDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.BomDoc -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PCBDwf: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PCBDwf -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PcbDoc: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PcbDoc -------------------------------------------------------------------------------- /Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PrjPcbVariants: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/pixhawk/Hardware/bbf3de5360f0e145645c40c170fe8c4f50865a6a/Pixhawk_debug_adapter/pixhawk_debug_adapter_mini.PrjPcbVariants -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # Pixhawk Hardware Designs 2 | 3 | [![Join the chat at https://gitter.im/PX4/Hardware](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/PX4/Hardware?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) 4 | 5 | [Pixhawk](http://pixhawk.org) is an independent open-hardware project that aims to provide "the gold standard" for readily-available, hiqh-quality and low-cost autopilot hardware designs for the academic, hobby and developer communities. 6 | Pixhawk supports multiple flight stacks: PX4 ® and ArduPilot ®. 7 | 8 | > **Note** Designs are provided for a number of components used in unmanned vehicles, including: Autopilots (Flight Management Units - FMUs), ESCs (electronic speed controllers), optical flow sensors, etc. 9 | 10 | ## What are Open Hardware Designs? 11 | 12 | The [Pixhawk project](https://pixhawk.org/) provides open hardware designs following the [OSHW 1.1 definition](https://www.oshwa.org/definition/). 13 | 14 | In essence, this definition allows anyone to freely study, modify, distribute, make, and sell the designs (or hardware based on the designs) under the terms of a particular [open source licence](#licensing). 15 | 16 | ## Hardware Designs 17 | 18 | Hardware designs delivered by the project are listed below. 19 | 20 | 21 | ### FMU (Autopilot) Designs 22 | 23 | Pixhawk FMU open designs include all information required to create an autopilot hardware product that is *firmware compatible* with other hardware created from the same design. 24 | Manufacturers are encouraged to take the designs and create products that are best suited to a particular market or use case (e.g. for very small vehicles, or those that operate at environmental extremes). 25 | 26 | > **Note** While a physical connector standard is not mandated, newer products generally follow the [Pixhawk Connector Standard](https://pixhawk.org/pixhawk-connector-standard/). 27 | 28 | 29 | #### Design Specifications 30 | 31 | Designs are *usually* specified in the form of *schematics* that show all included components (CPU, sensors, etc.), how they are connected, and their pin mappings. 32 | They may also include a BOM (bill of materials). 33 | 34 | > **Note** Not all designs deliver schematics. 35 | A minimal design needs to contain enough information for manufacturers to create a compatible products; this can also be achieved using a precise pinout definition and information about connections of internal/external busses, etc. 36 | 37 | #### Open Reference Hardware 38 | 39 | The project provides *open reference hardware/layouts* for **some** open designs, in some versions. 40 | These are provided in the form of PCB layout files. 41 | 42 | The reference hardware files are shared under the same [license](#licenses) as the associated open design, and hence may be used in the same way(s). 43 | 44 | #### FMU Versions 45 | 46 | The Pixhawk project has evolved the FMU design through a number of verisons. 47 | 48 | These are named using the designation: FMUvX (e.g.: FMUv1, FMUv2, FMUv3, FMUv4, etc.). 49 | Higher FMU numbers indicate that the board is more recent, but may not indicate increased capability (versions can be almost identical - differing only in connector wiring). 50 | 51 | The versions are listed below (with a high level overview of the main differences). 52 | 53 | Version | Year | Lead Product | CPU | Other 54 | --- | --- | --- | --- | --- 55 | [FMUv1](FMUv1/README.md) & [IOv1](IOv1) | 2012 | None | 168 MHz M4 | (Discontinued) Original Flight Management Unit and Separate I/O board. 56 | [FMUv2](FMUv2/README.md) | 2013 | Pixhawk 1 | 168 MHz M4 | Single board with STM32427VI processor. 57 | [FMUv3](FMUv3_REV_D/README.md) | 2015 | Pixhawk 2 | 168 MHz M4 | Redundant sensors. Identical to FMUv2, but usable flash doubled to 2MB. 58 | [FMUv4](FMUv4/README.md) | 2015 | Pixracer | 168 MHz M4 | Increased RAM. Faster CPU. More serial ports. No IO processor. 59 | FMUv4X | 2017 | Pixhawk 3 Pro | 168 MHz M4 | Slightly increased RAM. More serial ports. IO processor. Redundant sensors. 60 | [FMUv5](FMUv5/README.md) | 2018 | Pixhawk 4 | 200 MHz M7 | New processor (F7). Much faster. More RAM. More CAN busses. Much more configurable.
> **Note** Minimum specification provided (pinout info, but no schematics). 61 | FMUv5X | 2019 | Pixhawk 5X | 200 MHz M7 | Temp-calibrated, redundant sensors. 62 | 63 | 64 | > **Note** Products based on Pixhawk designs are listed here: [PX4 User Guide > Pixhawk Series]( https://docs.px4.io/master/en/flight_controller/pixhawk_series.html#pixhawk-series). 65 | 66 | 67 | #### Derived FMU Products 68 | 69 | Commercial products that are *derived* (under the terms of the open source license) from the Pixhawk FMU designs must provide their schematics and other information. 70 | 71 | Relevant products are listed below: 72 | 73 | - [MindPX V2 Hardware](MindPXv2/README.md) 74 | 75 | 76 | ### Sapog ESC 77 | 78 | - [Sapog ESC](https://github.com/PX4/sapog) Hardware - The directory [sapog_reference_hardware](sapog_reference_hardware/README.md) contains the reference hardware design for the Sapog ESC firmware. 79 | 80 | ### Other 81 | 82 | - [AIRSPEEDv1](AIRSPEEDv1) - 83 | - [FLOWv1](FLOWv1) 84 | - [IMUv3_REV_C](IMUv3_REV_C) 85 | - [PSMv3_REV_C](PSMv3_REV_C) 86 | 87 | 88 | ## Dev Call 89 | 90 | Pixhawk standards are developed in a weekly public developer call. 91 | 92 | The call is shown in the [Dronecode calendar](https://www.dronecode.org/calendar/) as: *Pixhawk Hardware Standards Weekly Call* (all call details are in the entry). 93 | 94 | 95 | 96 | ## Licensing and Trademarks 97 | 98 | Pixhawk project schematics and reference designs are licensed under [CC BY-SA 3](https://creativecommons.org/licenses/by-sa/3.0/legalcode). 99 | 100 | The license allows you to use, sell, share, modify and build on the files in almost any way you like - provided that you give credit/attribution, and that you share any changes that you make under the same open source license (see the [human readable version of the license](https://creativecommons.org/licenses/by-sa/3.0/) for a concise summary of the rights and obligations). 101 | 102 | > **Note** Boards that are *derived directly* from Pixhawk schematic files (or reference boards) must be open sourced. 103 | They can't be commercially licensed as proprietary products. 104 | 105 | Manufacturers can create (compatible) *fully independent products* by first generating fresh schematic files that have the same pin mapping/components as the FMU designs. 106 | Products that are based on independently created schematics are considered original works, and can be licensed as required. 107 | 108 | 109 | ## Trademarks 110 | 111 | The term *Pixhawk* is a trademark, and may not be used in product names without explicit permission from the trademark owner. 112 | 113 | Typically this trademark is granted to the first board based on a particular FMU design and/or boards that use Pixhawk open reference hardware layouts. 114 | 115 | > **Note** A "Pixhawk" is an autopilot that has been been given permission to use the Pixhawk trademark in its name. 116 | While other boards are based on the "Pixhawk FMU Standard", the are not *strictly speaking* "Pixhawks". 117 | 118 | -------------------------------------------------------------------------------- /sapog_reference_hardware/README.md: -------------------------------------------------------------------------------- 1 | # Reference Hardware for PX4 Sapog 2 | 3 | [![Join the chat at https://gitter.im/Zubax/general](https://img.shields.io/badge/GITTER-join%20chat-green.svg)](https://gitter.im/Zubax/general) 4 | 5 | This directory contains the reference hardware design for 6 | [PX4 Sapog](https://kb.zubax.com/x/cYAh) - an advanced open source ESC firmware. 7 | 8 | This specific design is intended as an application note; 9 | the main knowledge to gather from this design is the pinout of the MCU and its immediate connections. 10 | The design is implemented in Eagle, version 7 or newer is required. 11 | 12 | ## Resources 13 | 14 | * **[HOMEPAGE](https://kb.zubax.com/x/cYAh)** 15 | * **[SUPPORT & FEEDBACK](https://forum.zubax.com/)** 16 | * **[FIRMWARE ON GITHUB](https://github.com/PX4/sapog)** 17 | 18 | ## Design guidelines 19 | 20 | 1. When choosing the power transistors, keep their dynamic characteristics in mind: 21 | the switching time must be under 50 nanoseconds. 22 | Sapog employs somewhat unorthodox methods of state estimation which require a high-speed inverter. 23 | 2. The RC filters in the phase voltage feedback circuits should be designed so that their cutoff frequency 24 | is around 19 kHz and the output impedance does not exceed 8 kohm. 25 | 3. Unless your maximum supply voltage exceeds 25 V (6S), do not change the DC link voltage measurement divider. 26 | 27 | ## License 28 | 29 | The design is distributed under the terms of the 30 | Creative Commons Attribution-ShareAlike 3.0 Unported license (CC BY-SA 3.0). 31 | --------------------------------------------------------------------------------