├── LICENSE.md ├── README.md ├── abc ├── README.md └── hp1004.yaml ├── abracon ├── README.md └── aseaig.yaml ├── aeip ├── README.md ├── mdm5-1ep.yaml └── mdm5-2ep.yaml ├── allegro ├── README.md ├── acs712.yaml ├── acs730.yaml └── acs758.yaml ├── altera ├── 10m50sce144.yaml ├── 5m1270zt144.yaml ├── README.md └── maxv.yaml ├── amass ├── README.md ├── xt30pwf.yaml ├── xt30pwm.yaml ├── xt60pb.yaml ├── xt90.yaml └── xt90psv.yaml ├── amphenol ├── README.md └── rjmg16.yaml ├── amphenolca ├── README.md └── musbb15134.yaml ├── analog ├── README.md ├── ad623.yaml ├── ad7908.yaml ├── ad7918.yaml ├── ad7928.yaml ├── ad8208.yaml ├── ad822.yaml ├── ad8226.yaml ├── ad8276.yaml ├── ad8468.yaml ├── ad8515.yaml ├── ad8638.yaml ├── ad8639.yaml ├── ad9393.yaml ├── adg1206.yaml ├── adg508a.yaml ├── adis16448.yaml ├── adm4168e.yaml ├── adr291.yaml ├── adr292.yaml ├── adr293.yaml ├── adr380.yaml ├── adr381.yaml ├── adr38x.yaml └── adum3201.yaml ├── atmel ├── README.md ├── ata6670.yaml ├── atmega128.yaml ├── atmega8.yaml ├── atmega88.yaml ├── attiny2313a.yaml └── attiny25.yaml ├── avago ├── README.md ├── acpl-k71t.yaml └── acpl-k74t.yaml ├── belfuse ├── README.md └── si-60062-f.yaml ├── bourns ├── README.md ├── cat16-f4.yaml ├── cra2512.yaml ├── srr0603.yaml └── sru8043.yaml ├── capacitor ├── c0201.yaml ├── c0402.yaml ├── c0603.yaml ├── c0805.yaml ├── c1206.yaml ├── c1210.yaml ├── c1808.yaml ├── c1812.yaml ├── c1825.yaml ├── c2220.yaml ├── c2225.yaml ├── cae-a.yaml ├── cp-a.yaml ├── cp-b.yaml ├── cp-c.yaml ├── cp-d.yaml ├── cp3216-18.yaml ├── cp3528-21.yaml ├── cp6032-28.yaml └── cp7343-31.yaml ├── ck ├── README.md ├── kmr2.yaml └── os102011ma1qn1.yaml ├── connector └── din-8p.yaml ├── connfly └── ds1021-1x6s.yaml ├── crpowtech └── pt4115e.yaml ├── cypress ├── README.md └── cy15b102q.yaml ├── diode ├── bas40-04.yaml ├── bas40-05.yaml ├── bas40-06.yaml ├── bas70-04.yaml ├── bas70-05.yaml ├── bas70-06.yaml ├── bzx84.yaml ├── d-mma.yaml ├── d-mmb.yaml ├── d-mmu.yaml ├── led0603.yaml ├── m1.yaml ├── m2.yaml ├── m3.yaml ├── m4.yaml ├── m5.yaml ├── m6.yaml ├── m7.yaml ├── ss12.yaml ├── ss13.yaml ├── ss14.yaml ├── ss15.yaml ├── ss16.yaml ├── ss32.yaml ├── ss33.yaml ├── ss34.yaml ├── ss35.yaml └── ss36.yaml ├── diodes ├── README.md ├── b340a.yaml └── b560c.yaml ├── ecs ├── README.md ├── csm-7.yaml └── ecx-33q.yaml ├── espressif └── README.md ├── fairchild ├── README.md ├── mbr0520l.yaml └── nc7wz07.yaml ├── harting ├── 02011602101.yaml ├── 02021601202.yaml ├── 02021601301.yaml ├── 09181409622.yaml ├── 09185647904.yaml ├── 09561527613.yaml ├── 09562527613.yaml ├── 09562627813.yaml ├── 09563527613.yaml ├── 09564527613.yaml ├── 09564627813.yaml ├── 09682537613.yaml ├── 09682637813.yaml ├── 09684537613.yaml └── README.md ├── hirose ├── README.md ├── df12-4.0-36dp-0.5v.yaml ├── df13-2p-1.25h.yaml ├── df13-3p-1.25h.yaml ├── df13-4p-1.25h.yaml ├── df13-5p-1.25h.yaml ├── df13-6p-1.25h.yaml └── df13-7p-1.25h.yaml ├── inductor ├── cd43.yaml ├── cd54.yaml ├── cd75.yaml ├── l0402.yaml ├── l0603.yaml ├── l0805.yaml ├── l0806.yaml ├── l1008.yaml └── l1206.yaml ├── infineon ├── README.md └── kp235.yaml ├── irf ├── README.md ├── auirfs8409-7p.yaml ├── ir2101s.yaml ├── ir2113s.yaml ├── irf4905s.yaml ├── irf7313.yaml ├── irfl014n.yaml ├── irfs4115.yaml ├── irfs4310.yaml ├── irg4bh20k.yaml └── irlml0060.yaml ├── issi ├── README.md └── is64wv51216-ct.yaml ├── jst ├── README.md ├── b04b-pask-1.yaml ├── b04b-pask.yaml ├── b06b-pask-1.yaml ├── b06b-pask.yaml ├── b10b-padss-1f.yaml ├── b10b-padss-f.yaml ├── b10b-pudss-1.yaml ├── b10b-pudss.yaml ├── b12b-pudss-1.yaml ├── b12b-pudss.yaml ├── b30b-pudss-1.yaml ├── b30b-pudss.yaml ├── b8b-ph-k-s.yaml ├── bm04b-pass-1.yaml ├── bm04b-pass.yaml ├── s04b-pask-2.yaml ├── s06b-pask-2.yaml ├── s08b-pudss-1.yaml ├── s10b-padss-1.yaml ├── s12b-pudss-1.yaml ├── s30b-pudss-1.yaml ├── sm03b-ghs-tb.yaml └── sm07b-ghs-tb.yaml ├── keystone ├── 8195.yaml └── README.md ├── kingbright ├── README.md ├── kpa-3010.yaml ├── kpa-3010cgck.yaml ├── kpa-3010ec.yaml └── kpa-3010qbc-d.yaml ├── kyocera ├── 145602.yaml ├── 145602070001829s+.yaml ├── 245602.yaml ├── 245602670001829h+.yaml └── README.md ├── ledguhon └── jh-9rgb14g45.yaml ├── linear ├── README.md └── lt1611.yaml ├── macroblock └── mbi6651.yaml ├── maxim ├── README.md ├── max14626.yaml ├── max1735.yaml ├── max6070.yaml ├── max6071.yaml ├── max607x.yaml ├── max6421.yaml ├── max764.yaml ├── max765.yaml ├── max766.yaml ├── max9924.yaml ├── max9925.yaml └── max9927.yaml ├── mecxtal └── ssg-32.768k-12.5p.yaml ├── micrel ├── README.md └── mic29301.yaml ├── microchip ├── README.md ├── ksz8895.yaml └── mic29301.yaml ├── misc ├── mh-2.3-5.yaml ├── mh-2.9-4.yaml ├── mh-2.9-7.yaml ├── mh-3-10x6.yaml ├── mh-3.2-5.yaml ├── mh-3.2-7.yaml ├── mh-3.4-4.4.yaml ├── mh-3.4-8.yaml ├── mh-3.5-10x6.yaml ├── mh-3.5-8x6.yaml ├── mh-4-8.yaml ├── mh-5-10.yaml ├── mh-5-7.5.yaml ├── tp-sm-1.yaml ├── tp-th-1.yaml ├── tp-th-5.yaml ├── tph-2.5-sm-q2.5.yaml └── tph-3.5-sm-q3.5.yaml ├── module ├── brd-stm32f103.yaml ├── esp-07.yaml ├── led-driver-3w-700ma.yaml ├── oled-ssd1306.yaml ├── sparkfun-pro-micro.yaml └── usr-tcp232-ed2.yaml ├── molex ├── 39-28-1043.yaml ├── 39-28-1243.yaml ├── 67503-1020.yaml ├── 70246-3404.yaml ├── 70246-4004.yaml ├── 90136-1202.yaml ├── 90136-2103.yaml ├── 95552-2887.yaml └── README.md ├── murata ├── README.md ├── bnx012-01.yaml └── lqh88p.yaml ├── nichicon ├── README.md ├── ubx1e102mhl.yaml ├── ubx1h101mpl.yaml ├── ubx1v102mhl.yaml └── ubx2a331mhl.yaml ├── nxp ├── 74hc4050.yaml ├── README.md ├── bas521.yaml ├── bat54s.yaml ├── bc846.yaml ├── bc856.yaml ├── bc857.yaml ├── bzv55.yaml ├── pmeg3030bep.yaml └── tl431.yaml ├── ohmite ├── README.md └── lvk24.yaml ├── onsemi ├── README.md ├── bas40l.yaml ├── mbra340t3g.yaml ├── mbrb20100ct.yaml ├── mbrs540t3g.yaml ├── mmbt3904l.yaml ├── mmsd4148.yaml ├── ncv7800.yaml ├── nsi50350ast3g.yaml ├── nuf2042xv6.yaml ├── nuf2221w1.yaml ├── nup2105l.yaml └── ss14.yaml ├── oupiin └── 2212-2x10g00d.yaml ├── panasonic └── evq.yaml ├── pulse └── README.md ├── resistor ├── r0201.yaml ├── r0402.yaml ├── r0603.yaml ├── r0805.yaml ├── r1206.yaml ├── r1210.yaml ├── r2010.yaml └── r2512.yaml ├── rohm ├── README.md └── msl0104rgb.yaml ├── samtec ├── README.md ├── esq-108-12-t.yaml ├── esq-116-12-t.yaml ├── mtmm-110-06-d.yaml ├── mtmm-116-06-q.yaml ├── tst-105-01-d.yaml ├── tst-107-01-d.yaml ├── tst-110-01-d.yaml ├── tsw-107-05-s.yaml ├── tsw-115-05-t.yaml └── tsw-116-05-t.yaml ├── st ├── README.md ├── l293d.yaml ├── l3gd20h.yaml ├── l9637.yaml ├── ld1117.yaml ├── pm8834.yaml ├── stm32f030c.yaml ├── stm32f030f.yaml ├── stps40150.yaml └── stps5l60.yaml ├── stocko ├── README.md ├── mks1855.yaml ├── mks1856.yaml └── mks1858.yaml ├── tdk ├── README.md ├── b82422t.yaml └── b82477g4.yaml ├── te ├── 1-216093-6.yaml ├── 1206sfh.yaml ├── 1658525-2.yaml ├── 2410sfv.yaml ├── 63849-1.yaml ├── README.md └── im17ts.yaml ├── ti ├── README.md ├── ads7883.yaml ├── am26lv31e.yaml ├── am26lv32e.yaml ├── cd4010b.yaml ├── cd4093b.yaml ├── dac104s085.yaml ├── ina139.yaml ├── ina169.yaml ├── iso1050.yaml ├── iso721.yaml ├── iso722.yaml ├── iso7220.yaml ├── iso7221.yaml ├── iso722x.yaml ├── iso7230.yaml ├── iso7231.yaml ├── iso723x.yaml ├── iso72x.yaml ├── iso7640.yaml ├── iso7641.yaml ├── iso764x.yaml ├── lm1086.yaml ├── lm1117mpx.yaml ├── lm158.yaml ├── lm2576.yaml ├── lm258.yaml ├── lm2596.yaml ├── lm2672.yaml ├── lm27313.yaml ├── lm2940.yaml ├── lm311.yaml ├── lm358.yaml ├── lm5050-2.yaml ├── lm5069.yaml ├── lmv321.yaml ├── lp2951.yaml ├── opa335.yaml ├── ref02.yaml ├── sn65hvd234.yaml ├── sn74ahc125.yaml ├── sn74hc4851.yaml ├── sn74lvc1g07.yaml ├── sn74lvc2t45-q1.yaml ├── tca6507.yaml ├── tl431.yaml ├── tlv1117.yaml ├── tlv710.yaml ├── tm4c1294ncpdt.yaml ├── tmp102.yaml ├── tms320f28374dptp.yaml ├── tms320f28379dptp.yaml ├── tpd4e001-q1.yaml ├── tps2412.yaml ├── tps3702.yaml ├── tps54560.yaml ├── tps62420.yaml ├── tps65217.yaml ├── tps723.yaml ├── tps767.yaml ├── ts3usb30e.yaml └── txs0108e.yaml ├── toshiba ├── README.md ├── tc7s14f.yaml ├── tca62724fmg.yaml └── tlp160g.yaml ├── txc ├── 7m.yaml └── README.md ├── vicor ├── 28c.yaml ├── 375b.yaml ├── README.md └── dcm300p240t600.yaml ├── vishay ├── README.md ├── bat42w.yaml ├── crcw2512.yaml ├── smbj.yaml ├── vs-10bq030.yaml ├── vs-30bq100.yaml ├── vs-mbrb20.yaml └── wslp3921.yaml ├── wurth ├── 74477020.yaml ├── 7447709470.yaml ├── 7447709680.yaml ├── 744771147.yaml ├── 7447798720.yaml ├── 749013011a.yaml ├── 74990101210.yaml └── README.md └── yageo ├── README.md ├── sqp10a.yaml ├── sqp500.yaml └── tc124-jr-07.yaml /abc/README.md: -------------------------------------------------------------------------------- 1 | ABC 2 | === 3 | 4 | * **ABC Taiwan Electronics Corp.** 5 | * http://www.abctwn.com.tw 6 | -------------------------------------------------------------------------------- /abc/hp1004.yaml: -------------------------------------------------------------------------------- 1 | name: HP1004 2 | suffix: 1R8ML, 2R0ML, 4R7ML, 6R8ML, 100ML, 150ML, 220ML, 470ML, 101ML 3 | description: SMT Power Inductor 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: molded 11 | bodyWidth: 10.2-10.8 12 | bodyLength: 10.9-11.7 13 | height: 4 14 | leadWidth: 3.2-3.8 15 | leadLength: 1.2-2.2 16 | 17 | padWidth: 3.5 18 | padHeight: 4.5 19 | padSpace: 6 20 | -------------------------------------------------------------------------------- /abracon/README.md: -------------------------------------------------------------------------------- 1 | ABRACON 2 | ======= 3 | 4 | * **Abracon LLC.** 5 | * http://abracon.com 6 | -------------------------------------------------------------------------------- /abracon/aseaig.yaml: -------------------------------------------------------------------------------- 1 | name: ASEAIG 2 | description: Automotive and Industrial Grade CMOS SMD Crystal Oscillator 3 | datasheet: http://www.abracon.com/AIGOscillators/ASEAIG.pdf 4 | keywords: IC, Digital, Generator, Oscillator 5 | 6 | pinout: 7 | TRI: 1 8 | GND: 2 9 | OUT: 3 10 | VDD: 4 11 | 12 | properties: 13 | out: OUT, TRI 14 | power: VDD 15 | ground: GND 16 | 17 | schematic: 18 | symbol: IC 19 | left: VDD 20 | right: OUT, TRI 21 | bottom: GND 22 | 23 | housing: 24 | pattern: oscillator 25 | options: corner-concave 26 | bodyWidth: 2.4-2.6 27 | bodyLength: 3.1-3.3 28 | height: 1.2 29 | leadWidth: 0.9 30 | leadLength: 0.65 31 | rowSpan: 2.3 32 | columnSpan: 3 33 | 34 | padWidth: 1 35 | padHeight: 1.4 36 | padDistance1: 1.6 37 | padDistance2: 2.2 38 | -------------------------------------------------------------------------------- /aeip/README.md: -------------------------------------------------------------------------------- 1 | AEIP 2 | ===== 3 | 4 | * **Alexander Electric Istochniki Elektropitaniya Ltd.** 5 | * http://www.aeip.ru 6 | -------------------------------------------------------------------------------- /aeip/mdm5-1ep.yaml: -------------------------------------------------------------------------------- 1 | name: MDM5-1E 2 | suffix: 1.5VUP, 2.5VP, 3.3VP, 05VP, 09VP, 12VP, 15VP, 24VP, 27VP, 48VP 3 | description: DC-DC Converter 4 | datasheet: http://www.aeip.ru/images/pdf/mdm-e_5.pdf 5 | keywords: IC, Analog, DC-DC 6 | 7 | pinout: 8 | IN: 9 | +IN: 22, 23 10 | -IN: 2, 3 11 | EN: 4 12 | OUT: 13 | +OUT: 14 14 | -OUT: 16 15 | TRIM: 15 16 | NC: 9, 11 17 | 18 | properties: 19 | in: +IN, -IN, EN 20 | out: +OUT, -OUT 21 | power: +IN, -IN, +OUT, -OUT 22 | passive: TRIM 23 | nc: NC 24 | 25 | schematic: 26 | symbol: IC 27 | left: IN, EN 28 | right: OUT, NC, TRIM 29 | 30 | housing: 31 | pattern: DIP 32 | bodyWidth: 20 33 | bodyLength: 30 34 | height: 8 35 | leadDiameter: 0.8 36 | leadLength: 7.5 37 | leadSpan: 15.24 38 | leadCount: 24 39 | pitch: 2.54 40 | -------------------------------------------------------------------------------- /aeip/mdm5-2ep.yaml: -------------------------------------------------------------------------------- 1 | name: MDM5-2E 2 | suffix: 1.51.5VUP, 2.52.5VP, 3.33.3VP, 0505VP, 0512VP, 0515VP, 1212VP, 1515VP, 2727VP 3 | description: DC-DC Converter with Dual Output 4 | datasheet: http://www.aeip.ru/images/pdf/mdm-e_5.pdf 5 | keywords: IC, analog, DC-DC 6 | 7 | pinout: 8 | IN: 9 | +IN: 22, 23 10 | -IN: 2, 3 11 | EN: 4 12 | OUT1: 13 | +OUT1: 14 14 | -OUT1: 16 15 | OUT2: 16 | +OUT2: 9 17 | -OUT2: 11 18 | NC: 15 19 | 20 | properties: 21 | in: +IN, -IN, EN 22 | out: +OUT1-2, -OUT1-2 23 | power: +IN, -IN, +OUT1-2, -OUT1-2 24 | passive: TRIM 25 | nc: NC 26 | 27 | schematic: 28 | symbol: IC 29 | left: IN, EN 30 | right: OUT1-2, NC 31 | 32 | housing: 33 | pattern: DIP 34 | bodyWidth: 20 35 | bodyLength: 30 36 | height: 8 37 | leadDiameter: 0.8 38 | leadLength: 7.5 39 | leadSpan: 15.24 40 | leadCount: 24 41 | pitch: 2.54 42 | -------------------------------------------------------------------------------- /allegro/README.md: -------------------------------------------------------------------------------- 1 | ALLEGRO 2 | ======= 3 | 4 | * **Allegro MicroSystems, LLC** 5 | * http://www.allegromicro.com 6 | -------------------------------------------------------------------------------- /allegro/acs712.yaml: -------------------------------------------------------------------------------- 1 | name: ACS712 2 | description: Fully Integrated, Hall Effect-Based Linear Current Sensor IC with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor 3 | datasheet: http://www.allegromicro.com/~/media/Files/Datasheets/ACS712-Datasheet.ashx?la=en 4 | keywords: IC, Analog, Current, Sensor 5 | 6 | pinout: 7 | IP+: 1, 2 8 | IP-: 3, 4 9 | VIOUT: 7 10 | FILTER: 6 11 | VCC: 8 12 | GND: 5 13 | 14 | properties: 15 | out: VIOUT 16 | passive: IP+, IP-, FILTER 17 | power: VCC 18 | ground: GND 19 | 20 | schematic: 21 | symbol: IC 22 | left: IP+, IP- 23 | right: VIOUT, FILTER 24 | top: VCC 25 | bottom: GND 26 | 27 | housing: 28 | outline: JEDEC MS-012 AA 29 | 30 | padWidth: 1.75 31 | padHeight: 0.65 32 | padDistance: 5.6 33 | -------------------------------------------------------------------------------- /allegro/acs730.yaml: -------------------------------------------------------------------------------- 1 | name: ACS730 2 | description: 1 MHz Bandwidth, Galvanically Isolated Current Sensor IC in Small Footprint SOIC8 Package 3 | datasheet: http://www.allegromicro.com/~/media/Files/Datasheets/ACS730-Datasheet.ashx?la=en 4 | keywords: IC, Analog, Current, Sensor 5 | 6 | pinout: 7 | IP+: 1, 2 8 | IP-: 3, 4 9 | VIOUT: 7 10 | VZCR: 6 11 | VCC: 8 12 | GND: 5 13 | 14 | properties: 15 | out: VIOUT 16 | passive: IP+, IP-, VZCR 17 | power: VCC 18 | ground: GND 19 | 20 | schematic: 21 | symbol: IC 22 | left: IP+, IP- 23 | right: VIOUT, VZCR 24 | top: VCC 25 | bottom: GND 26 | 27 | housing: 28 | outline: JEDEC MS-012 AA 29 | 30 | padWidth: 1.75 31 | padHeight: 0.65 32 | padDistance: 5.6 33 | -------------------------------------------------------------------------------- /altera/README.md: -------------------------------------------------------------------------------- 1 | ALTERA 2 | ====== 3 | 4 | * **Altera Corporation** (aquired by **Intel**) 5 | * https://www.altera.com 6 | -------------------------------------------------------------------------------- /altera/maxv.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: Low Cost Low Power CPLD 3 | keywords: IC, Digital, CPLD 4 | 5 | properties: 6 | bidir: IO 7 | in: TMS, TCK, TDI 8 | out: TDO 9 | power: VCCINT, VCCIO1-4 10 | ground: GNDINT, GNDIO 11 | 12 | joint: 13 | DIFFIO, DEV: '_' 14 | 15 | schematic: 16 | symbol: IC 17 | left: BANK1-4, JTAG, VCCINT 18 | right: BANK1-4, GNDINT 19 | top: VCCIO1-4 20 | bottom: GNDIO1-4 21 | -------------------------------------------------------------------------------- /amass/README.md: -------------------------------------------------------------------------------- 1 | AMASS 2 | ===== 3 | 4 | * **Changzhou Amass Electronics Co., Ltd.** 5 | * http://en.china-amass.com 6 | -------------------------------------------------------------------------------- /amass/xt30pwf.yaml: -------------------------------------------------------------------------------- 1 | name: XT30PWF 2 | description: Battery Connector 3 | keywords: Connector, Female 4 | 5 | pinout: 6 | POWER: 7 | +: 2 8 | -: 1 9 | 10 | schematic: 11 | symbol: connector 12 | right: POWER 13 | 14 | housing: 15 | pattern: custom 16 | options: polarized 17 | bodyWidth: 10.2 18 | bodyLength: 10.2 19 | height: 5.3 20 | courtyard: 1 21 | 22 | holeDiameter1: 2.5 23 | padPosition1: 8.9, 2.5, 8.9, -2.5 24 | 25 | holeDiameter2: 1.2 26 | padPosition2: 3.9, 5.5, 3.9, -5.5 27 | -------------------------------------------------------------------------------- /amass/xt30pwm.yaml: -------------------------------------------------------------------------------- 1 | name: XT30PWM 2 | description: Battery Connector 3 | keywords: Connector, Male 4 | 5 | pinout: 6 | POWER: 7 | +: 2 8 | -: 1 9 | 10 | schematic: 11 | symbol: connector 12 | right: POWER 13 | 14 | housing: 15 | pattern: custom 16 | options: polarized 17 | bodyWidth: 9 18 | bodyLength: 10.2 19 | height: 5.3 20 | courtyard: 1 21 | 22 | holeDiameter1: 2.5 23 | padPosition1: 8.55, -2.5, 8.55, 2.5 24 | 25 | holeDiameter2: 1.2 26 | padPosition2: -1.45, -5.5, -1.45, 5.5 27 | -------------------------------------------------------------------------------- /amass/xt60pb.yaml: -------------------------------------------------------------------------------- 1 | name: XT60PB 2 | description: Battery Connector 3 | keywords: Connector 4 | 5 | pinout: 6 | POWER: 7 | +: 2 8 | -: 1 9 | 10 | schematic: 11 | symbol: connector 12 | right: POWER 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 8.4 17 | bodyLength: 16 18 | height: 16 19 | silkscreen: M -4.2 -6 -2.2 -8 M 4.2 -6 2.2 -8 20 | holeDiameter: 5 21 | padWidth: 6 22 | padHeight: 6 23 | padPosition: 0, -3.5, 0, 3.5 24 | courtyard: 1 25 | -------------------------------------------------------------------------------- /amass/xt90.yaml: -------------------------------------------------------------------------------- 1 | name: XT90 2 | description: Battery Connector 3 | keywords: Connector 4 | 5 | pinout: 6 | POWER: 7 | +: 2 8 | -: 1 9 | 10 | schematic: 11 | symbol: connector 12 | right: POWER 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 9.9 17 | bodyLength: 20.8 18 | height: 21.1 19 | silkscreen: M -4.95 -7.4 -1.95 -10.4 M 4.95 -7.4 1.95 -10.4 20 | holeDiameter: 6 21 | padDiameter: 9 22 | padPosition: 0, -5.5, 0, 5.5 23 | courtyard: 1 24 | -------------------------------------------------------------------------------- /amass/xt90psv.yaml: -------------------------------------------------------------------------------- 1 | name: XT90PSV 2 | description: Battery Connector, Side Mounting, Vertical 3 | keywords: Connector 4 | 5 | pinout: 6 | POWER: 7 | +: 2 8 | -: 1 9 | 10 | schematic: 11 | symbol: connector 12 | right: POWER 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 10 17 | bodyLength: 21 18 | height: 21 19 | courtyard: 1 20 | silkscreen: M -5 -2.5 -5.5 -2.5 -5.5 -3.5 -5 -3.5 M 5 -2.5 5.5 -2.5 5.5 -3.5 5 -3.5 21 | 22 | holeDiameter1: 5 23 | padPosition1: 0, -26 24 | 25 | padWidth2: 8 26 | padHeight2: 8 27 | padPosition2: 0, -15 28 | -------------------------------------------------------------------------------- /amphenol/README.md: -------------------------------------------------------------------------------- 1 | AMPHENOL 2 | ======== 3 | 4 | * **Amphenol Corporation** 5 | * http://amphenol.com 6 | -------------------------------------------------------------------------------- /amphenolca/README.md: -------------------------------------------------------------------------------- 1 | AMPHENOLCA 2 | ========== 3 | 4 | * **Amphenol Canada Corp.** 5 | * https://www.amphenolcanada.com 6 | 7 | -------------------------------------------------------------------------------- /amphenolca/musbb15134.yaml: -------------------------------------------------------------------------------- 1 | name: MUSBB15134 2 | description: MUSB Series Rugged Mini-B USB Receptacle, Right Angle PCB 3 | datasheet: https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?PartNum=MUSBB15134 4 | keywords: Connector, Female 5 | 6 | pinout: 7 | USB: 8 | VBUS: 1 9 | D-: 2 10 | D+: 3 11 | ID: 4 12 | GND: 5 13 | CASE: 7, 8 14 | 15 | schematic: 16 | symbol: connector 17 | right: USB 18 | top: CASE 19 | bottom: CASE 20 | 21 | housing: 22 | pattern: custom 23 | bodyWidth: 20 24 | bodyLength: 7.48 25 | height: 10 26 | 27 | holeDiameter: 0.75 28 | padPosition: -1.6, -3.1, -0.8, -1.9, 0, -3.1, 0.8, -1.9, 1.6, -3.1 29 | silkscreen: M -4.6 3.74 -4.6 6.24 4.6 6.24 4.6 3.74 30 | 31 | holeDiameter1: 3.15 32 | padPosition1: -4.25, -2.5, 4.25, -2.5 33 | padDiameter1: 3.5 34 | -------------------------------------------------------------------------------- /analog/README.md: -------------------------------------------------------------------------------- 1 | ANALOG 2 | ====== 3 | 4 | * **Analog Devices, Inc** 5 | * http://www.analog.com 6 | -------------------------------------------------------------------------------- /analog/ad623.yaml: -------------------------------------------------------------------------------- 1 | name: AD623 2 | variations: PDIP, SOIC, MSOP 3 | alias: AD623A, AD623B 4 | description: Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD623.pdf 6 | keywords: IC, Analog, OpAmp 7 | 8 | pinout: 9 | RG: 10 | +RG: 8 11 | -RG: 1 12 | -IN: 2 13 | +IN: 3 14 | -VS: 4 15 | REF: 5 16 | OUTPUT: 6 17 | +VS: 7 18 | 19 | properties: 20 | power: +VS, -VS 21 | in: +IN, -IN, REF 22 | out: OUTPUT 23 | passive: +RG, -RG 24 | inverted: -IN 25 | 26 | schematic: 27 | symbol: IC 28 | left: +IN, RG, -IN 29 | right: OUTPUT, REF 30 | top: +VS 31 | bottom: -VS 32 | 33 | housing@PDIP: 34 | suffix: N 35 | outline: JEDEC MS-001 BA 36 | 37 | housing@SOIC: 38 | suffix: R 39 | outline: JEDEC MS-012 AA 40 | 41 | housing@MSOP: 42 | suffix: RM 43 | outline: JEDEC MO-187 AA 44 | -------------------------------------------------------------------------------- /analog/ad7908.yaml: -------------------------------------------------------------------------------- 1 | name: AD7908B 2 | alias: AD7908WY 3 | description: 8-Channel, 1 MSPS, 8-Bit ADC with Sequencer 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf 5 | keywords: IC, Analog, ADC 6 | 7 | pinout: 8 | IN: 9 | VIN0-7: 16-9 10 | REFIN: 7 11 | SPI: 12 | ~CS: 3 13 | SCLK: 1 14 | DIN: 2 15 | DOUT: 18 16 | VDRIVE: 19 17 | AVDD: 5, 6 18 | AGND: 4, 8, 17, 20 19 | 20 | properties: 21 | in: VIN0-7, REFIN, ~CS, SCLK, DIN, VDRIVE 22 | out: DOUT 23 | power: AVDD 24 | ground: AGND 25 | inverted: ~CS 26 | 27 | schematic: 28 | symbol: IC 29 | left: IN, REFIN 30 | right: SPI, VDRIVE 31 | top: AVDD 32 | bottom: AGND 33 | 34 | housing: 35 | suffix: RU 36 | outline: JEDEC MO-153 AC 37 | -------------------------------------------------------------------------------- /analog/ad7918.yaml: -------------------------------------------------------------------------------- 1 | base: AD7908 2 | name: AD7918B 3 | alias: AD7918WY 4 | description: 8-Channel, 1 MSPS, 10-Bit ADC with Sequencer 5 | -------------------------------------------------------------------------------- /analog/ad7928.yaml: -------------------------------------------------------------------------------- 1 | base: AD7908 2 | name: AD7928B 3 | alias: AD7928WB 4 | description: 8-Channel, 1 MSPS, 12-Bit ADC with Sequencer 5 | -------------------------------------------------------------------------------- /analog/ad8208.yaml: -------------------------------------------------------------------------------- 1 | name: AD8208WB 2 | variations: MSOP, SOIC 3 | alias: AD8208WH 4 | description: High Voltage, Precision Difference Amplifier 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8208.pdf 6 | keywords: IC, analog, OpAmp 7 | 8 | pinout: 9 | IN: 10 | -IN: 1 11 | +IN: 8 12 | OUT: 5 13 | A: 14 | A1-2: 3, 4 15 | VS: 6 16 | GND: 2 17 | NC: 7 18 | 19 | properties: 20 | in: +IN, -IN, A2 21 | out: OUT, A1 22 | power: VS 23 | ground: GND 24 | inverted: -IN 25 | nc: NC 26 | 27 | schematic: 28 | symbol: IC 29 | left: IN, A 30 | right: OUT, NC 31 | top: VS 32 | bottom: GND 33 | 34 | housing@MSOP: 35 | suffix: RM 36 | outline: JEDEC MO-187 AA 37 | 38 | housing@SOIC: 39 | suffix: R 40 | outline: JEDEC MS-012 AA 41 | -------------------------------------------------------------------------------- /analog/ad8226.yaml: -------------------------------------------------------------------------------- 1 | name: AD8226 2 | variations: MSOP, SOIC 3 | alias: AD8226A, AD8226B 4 | description: Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8226.pdf 6 | keywords: IC, analog, OpAmp 7 | 8 | pinout: 9 | -IN: 1 10 | RG: 2, 3 11 | +IN: 4 12 | -VS: 5 13 | REF: 6 14 | VOUT: 7 15 | +VS: 8 16 | 17 | properties: 18 | power: +VS, -VS 19 | in: +IN, -IN, REF 20 | out: VOUT 21 | passive: RG 22 | inverted: -IN 23 | 24 | schematic: 25 | symbol: IC 26 | left: +IN, RG, -IN 27 | right: VOUT, REF 28 | top: +VS 29 | bottom: -VS 30 | 31 | housing@MSOP: 32 | suffix: RM 33 | outline: JEDEC MO-187 AA 34 | 35 | housing@SOIC: 36 | suffix: R 37 | outline: JEDEC MS-012 AA 38 | -------------------------------------------------------------------------------- /analog/ad8276.yaml: -------------------------------------------------------------------------------- 1 | name: AD8276A 2 | variations: MSOP, SOIC 3 | alias: AD8276B 4 | description: Low Power, Unity Gain Fully Differential Amplifier & ADC Driver 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8276_8277.pdf 6 | keywords: IC, analog, OpAmp 7 | 8 | pinout: 9 | IN: 10 | -IN: 2 11 | +IN: 3 12 | OUT: 6 13 | SENSE: 5 14 | REF: 1 15 | +VS: 7 16 | -VS: 4 17 | NC: 8 18 | 19 | properties: 20 | power: +VS, -VS 21 | in: +IN, -IN, REF 22 | out: OUT 23 | passive: SENSE 24 | inverted: -IN 25 | nc: NC 26 | 27 | schematic: 28 | symbol: IC 29 | left: IN, NC 30 | right: REF, OUT, SENSE 31 | top: +VS 32 | bottom: -VS 33 | 34 | housing@MSOP: 35 | suffix: RM 36 | outline: JEDEC MO-187 AA 37 | 38 | housing@SOIC: 39 | suffix: R 40 | outline: JEDEC MS-012 AA 41 | -------------------------------------------------------------------------------- /analog/ad8468.yaml: -------------------------------------------------------------------------------- 1 | name: AD8468WB 2 | description: Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator 3 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8468.pdf 4 | keywords: IC, analog, comparator 5 | 6 | pinout: 7 | IN: 8 | VP: 3 9 | VN: 4 10 | Q: 1 11 | SDN: 5 12 | VCC: 6 13 | GND: 2 14 | 15 | properties: 16 | in: VP, VN, SDN 17 | out: Q 18 | power: VCC 19 | ground: GND 20 | inverted: VN 21 | 22 | schematic: 23 | symbol: IC 24 | left: IN 25 | right: Q, SDN 26 | top: VCC 27 | bottom: GND 28 | 29 | housing: 30 | suffix: KS 31 | outline: JEDEC MO-203 AB 32 | -------------------------------------------------------------------------------- /analog/ad8515.yaml: -------------------------------------------------------------------------------- 1 | name: AD8515A 2 | variations: SC70, SOT-23 3 | description: 1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8515.pdf 5 | keywords: IC, Analog, OpAmp 6 | 7 | pinout: 8 | OUT: 1 9 | V-: 2 10 | IN: 11 | -IN: 4 12 | +IN: 3 13 | V+: 5 14 | 15 | properties: 16 | power: V+, V- 17 | in: +IN, -IN 18 | out: OUT 19 | inverted: -IN 20 | 21 | schematic: 22 | symbol: IC 23 | left: IN 24 | right: OUT 25 | top: V+ 26 | bottom: V- 27 | 28 | housing@SC70: 29 | suffix: KS 30 | outline: JEDEC MO-203 AA 31 | 32 | housing@SOT-23: 33 | suffix: RT 34 | outline: JEDEC MO-178 AA 35 | -------------------------------------------------------------------------------- /analog/ad8638.yaml: -------------------------------------------------------------------------------- 1 | name: AD8638A 2 | variations: SOIC, MSOP, SOT-23 3 | description: 16 V Auto-Zero, Rail-to-Rail Output Operational Amplifier 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD8638_8639.pdf 5 | keywords: IC, Analog, OpAmp 6 | 7 | pinout: 8 | IN: 9 | -IN: 2 10 | +IN: 3 11 | OUT: 6 12 | NC: 1, 5, 8 13 | V+: 7 14 | V-: 4 15 | 16 | pinout@SOT-23: 17 | IN: 18 | -IN: 4 19 | +IN: 3 20 | OUT: 1 21 | V+: 5 22 | V-: 2 23 | 24 | properties: 25 | power: V+, V- 26 | in: +IN, -IN 27 | out: OUT 28 | inverted: -IN 29 | nc: NC 30 | 31 | schematic: 32 | symbol: IC 33 | left: IN 34 | right: OUT, NC 35 | top: V+ 36 | bottom: V- 37 | 38 | housing@SOIC: 39 | suffix: R 40 | outline: JEDEC MS-012 AA 41 | 42 | housing@MSOP: 43 | suffix: RM 44 | outline: JEDEC MO-187 AA 45 | 46 | housing@SOT-23: 47 | suffix: RJ 48 | outline: JEDEC MO-178 AA 49 | -------------------------------------------------------------------------------- /analog/adg1206.yaml: -------------------------------------------------------------------------------- 1 | name: ADG1206Y 2 | variations: TSSOP 3 | description: Low Capacitance, 16-Channel ±15 V/+12 V Multiplexer (TSSOP) 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADG1206_1207.pdf 5 | keywords: IC, Analog, Multiplexer 6 | 7 | pinout@TSSOP: 8 | SOURCE: 9 | S1-16: 19-26, 11-4 10 | ADDRESS: 11 | A0-3: 17-14 12 | EN: 18 13 | D: 28 14 | VDD: 1 15 | VSS: 27 16 | GND: 12 17 | NC: 2, 3, 13 18 | 19 | properties: 20 | in: EN, A0-3 21 | passive: S1-16, D 22 | power: VDD, VSS 23 | ground: GND 24 | nc: NC 25 | 26 | schematic: 27 | symbol: IC 28 | left: SOURCE, EN 29 | right: D, ADDRESS, NC 30 | top: VDD, VSS 31 | bottom: GND 32 | 33 | housing@TSSOP: 34 | suffix: RU 35 | outline: JEDEC MO-153 AE 36 | -------------------------------------------------------------------------------- /analog/adg508a.yaml: -------------------------------------------------------------------------------- 1 | name: ADG508A 2 | variations: DIP, SOIC 3 | description: 8-Channel Analog Multiplexer 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADG508A_509A.pdf 5 | keywords: IC, analog, multiplexer 6 | 7 | pinout: 8 | SOURCE: 9 | S1-8: 4-7, 12-9 10 | ADDRESS: 11 | A0-2: 1, 16, 15 12 | EN: 2 13 | D: 8 14 | VDD: 13 15 | VSS: 3 16 | GND: 14 17 | 18 | properties: 19 | in: EN, A0-2 20 | bidir: S1-8, D 21 | power: VDD, VSS 22 | ground: GND 23 | 24 | schematic: 25 | symbol: IC 26 | left: SOURCE, EN 27 | right: D, ADDRESS 28 | top: VDD, VSS 29 | bottom: GND 30 | 31 | housing@DIP: 32 | outline: JEDEC MS-001 AB 33 | suffix: KN 34 | 35 | housing@SOIC: 36 | outline: JEDEC MS-012 AC 37 | suffix: KR 38 | -------------------------------------------------------------------------------- /analog/adm4168e.yaml: -------------------------------------------------------------------------------- 1 | name: ADM4168E 2 | description: ±15 kV ESD Protected Dual RS-422 Transceiver 3 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM4168E.PDF 4 | keywords: IC, Digital, Transceiver, Differential 5 | 6 | pinout: 7 | RI1: 8 | A1: 2 9 | B1: 1 10 | 11 | RO1: 3 12 | 13 | RI2: 14 | A2: 6 15 | B2: 7 16 | 17 | RO2: 5 18 | 19 | D1: 20 | DE1: 4 21 | DI1: 15 22 | 23 | DO1: 24 | Y1: 14 25 | Z1: 13 26 | 27 | D2: 28 | DE2: 12 29 | DI2: 9 30 | 31 | DO2: 32 | Y2: 10 33 | Z2: 11 34 | 35 | VCC: 16 36 | GND: 8 37 | 38 | properties: 39 | in: RI1-2, D1-2 40 | out: RO1-2, DO1-2 41 | power: VCC 42 | ground: GND 43 | 44 | schematic: 45 | symbol: IC 46 | left: RO1-2, D1-2 47 | right: RI1-2, DO1-2 48 | top: VCC 49 | bottom: GND 50 | 51 | housing: 52 | outline: JEDEC MO-153 AB 53 | suffix: BRUZ 54 | -------------------------------------------------------------------------------- /analog/adr291.yaml: -------------------------------------------------------------------------------- 1 | name: ADR291E 2 | variations: SOIC, TSSOP 3 | alias: ADR291F, ADR291G 4 | description: Low Noise Micropower 2.5 V Precision Voltage Reference 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADR291_292.pdf 6 | keywords: IC, Analog, Reference 7 | 8 | pinout: 9 | VIN: 2 10 | VOUT: 6 11 | GND: 4 12 | NC: 1, 3, 5, 7, 8 13 | 14 | properties: 15 | in: VIN 16 | out: VOUT 17 | power: VIN, VOUT 18 | ground: GND 19 | nc: NC 20 | 21 | schematic: 22 | symbol: IC 23 | left: VIN, NC 24 | right: VOUT, NC 25 | bottom: GND 26 | 27 | housing@SOIC: 28 | suffix: R 29 | outline: JEDEC MS-012 AA 30 | 31 | housing@TSSOP: 32 | suffix: RU 33 | outline: JEDEC MO-153 AA 34 | -------------------------------------------------------------------------------- /analog/adr292.yaml: -------------------------------------------------------------------------------- 1 | base: ADR291 2 | name: ADR292E 3 | alias: ADR292F, ADR292G 4 | description: Low Noise Micropower 4.096 V Precision Voltage Reference 5 | -------------------------------------------------------------------------------- /analog/adr293.yaml: -------------------------------------------------------------------------------- 1 | base: ADR291 2 | name: ADR293E 3 | alias: ADR293G 4 | description: Low Noise Micropower 5.0 V Precision Voltage Reference 5 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADR293.pdf 6 | -------------------------------------------------------------------------------- /analog/adr380.yaml: -------------------------------------------------------------------------------- 1 | base: ADR38x 2 | name: ADR380A 3 | description: Precision Low Drift 2.048 V SOT-23 Voltage Reference 4 | -------------------------------------------------------------------------------- /analog/adr381.yaml: -------------------------------------------------------------------------------- 1 | base: ADR38x 2 | name: ADR381A 3 | description: Precision Low Drift 2.500 V SOT-23 Voltage Reference 4 | -------------------------------------------------------------------------------- /analog/adr38x.yaml: -------------------------------------------------------------------------------- 1 | abstact: true 2 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADR380_381.pdf 3 | keywords: IC, Analog, Reference 4 | 5 | pinout: 6 | VIN: 1 7 | GND: 3 8 | VOUT: 2 9 | 10 | schematic: 11 | symbol: IC 12 | left: VIN 13 | right: VOUT 14 | bottom: GND 15 | 16 | housing: 17 | suffix: RT 18 | outline: JEDEC TO-236 AB 19 | -------------------------------------------------------------------------------- /analog/adum3201.yaml: -------------------------------------------------------------------------------- 1 | name: ADuM3201A 2 | alias: ADuM3201B, ADuM3201C, ADuM3201WA, ADuM3201WB, ADuM3201WC 3 | description: Dual-Channel, Digital Isolator, Enhanced System-Level ESD Reliability 4 | datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADUM3200_3201.pdf 5 | keywords: IC, Analog, Isolator 6 | 7 | pinout: 8 | VDD1: 1 9 | VOA: 2 10 | VIB: 3 11 | GND1: 4 12 | VDD2: 8 13 | VIA: 7 14 | VOB: 6 15 | GND2: 5 16 | 17 | properties: 18 | in: VIA, VIB 19 | out: VOA, VOB 20 | power: VDD1-2 21 | ground: GND1-2 22 | 23 | schematic: 24 | symbol: IC 25 | left: VDD1, VOA, VIB, GND1 26 | right: VDD2, VIA, VOB, GND2 27 | 28 | housing: 29 | suffix: R 30 | outline: JEDEC MS-012 AA 31 | -------------------------------------------------------------------------------- /atmel/README.md: -------------------------------------------------------------------------------- 1 | ATMEL 2 | ===== 3 | 4 | * **Atmel Corporation** 5 | * http://www.atmel.com 6 | -------------------------------------------------------------------------------- /atmel/attiny25.yaml: -------------------------------------------------------------------------------- 1 | name: ATtiny25 2 | description: 8-bit AVR Microcontroller 3 | datasheet: http://www.atmel.com/Images/Atmel-2586-AVR-8-bit-Microcontroller-ATtiny25-ATtiny45-ATtiny85_Datasheet.pdf 4 | keywords: IC, Digital, Microcontroller, MCU 5 | 6 | pinout: 7 | PORT: 8 | PB0: 5 9 | PB1: 6 10 | PB2: 7 11 | PB3: 2 12 | PB4: 3 13 | PB5: 1 14 | MOSI/DI/SDA/AIN0/OC0A/~OC1A~/AREF/PCINT0: 5 15 | MISO/DO/AIN1/OC0B/OC1A/PCINT1: 6 16 | SCK/USCK/SCL/ADC1/T0/INT0/PCINT2: 7 17 | PCINT3/XTAL1/CLKI/~OC1B~/ADC3: 2 18 | PCINT4/XTAL2/CLKO/OC1B/ADC2: 3 19 | PCINT5/~RESET~/ADC0/dW: 1 20 | VCC: 8 21 | GND: 4 22 | 23 | 24 | properties: 25 | bidir: PB0-5 26 | power: VCC 27 | ground: GND 28 | 29 | schematic: 30 | symbol: IC 31 | left: PORT 32 | right: PORT 33 | top: VCC 34 | bottom: GND 35 | 36 | housing: 37 | outline: JEDEC MS-001 BA 38 | -------------------------------------------------------------------------------- /avago/README.md: -------------------------------------------------------------------------------- 1 | AVAGO 2 | ===== 3 | 4 | * **Avago Technologies** (aquired by **Broadcom Limited**) 5 | * http://www.avagotech.com 6 | -------------------------------------------------------------------------------- /avago/acpl-k71t.yaml: -------------------------------------------------------------------------------- 1 | name: ACPL-K71T 2 | description: Automotive High Speed Low Power Digital Optocoupler 3 | datasheet: http://docs.avagotech.com/docs/AV02-2180EN 4 | keywords: IC, Analog, Optocoupler 5 | 6 | pinout: 7 | AN: 1 8 | CAT: 2 9 | OUT: 7 10 | VDD: 8 11 | GND: 5 12 | NC: 3, 4, 6 13 | 14 | properties: 15 | out: OUT 16 | passive: AN, CAT 17 | power: VDD 18 | ground: GND 19 | nc: NC 20 | 21 | schematic: 22 | symbol: IC 23 | left: AN, CAT, NC 24 | right: VDD, OUT, GND 25 | 26 | housing: 27 | pattern: SOP 28 | units: inches 29 | bodyWidth: 0.263-0.273 30 | bodyLength: 0.22-0.24 31 | height: 0.12-0.13 32 | leadWidth: 0.01-0.02 33 | leadLength: 0.0285-0.0395 34 | leadSpan: 0.443-0.463 35 | leadCount: 8 36 | pitch: 0.05 37 | 38 | padWidth: 0.075 39 | padHeight: 0.025 40 | padSpan: 0.498 41 | -------------------------------------------------------------------------------- /avago/acpl-k74t.yaml: -------------------------------------------------------------------------------- 1 | name: ACPL-K74T 2 | description: Automotive High Speed Low Power Digital Optocoupler 3 | datasheet: http://docs.avagotech.com/docs/AV02-2180EN 4 | keywords: IC, Analog, Optocoupler 5 | 6 | pinout: 7 | AN1: 1 8 | CAT1: 2 9 | OUT1: 7 10 | AN2: 4 11 | CAT2: 3 12 | OUT2: 6 13 | VDD: 8 14 | GND: 5 15 | 16 | properties: 17 | out: OUT1-2 18 | passive: AN1-2, CAT1-2 19 | power: VDD 20 | ground: GND 21 | 22 | parts: 23 | OC1: AN1, CAT1, OUT1, VDD, GND 24 | OC2: AN2, CAT2, OUT2 25 | 26 | schematic: 27 | symbol: IC 28 | left: AN1-2, CAT1-2 29 | right: VDD, OUT1-2, GND 30 | 31 | housing: 32 | pattern: SOP 33 | units: inches 34 | bodyWidth: 0.263-0.273 35 | bodyLength: 0.22-0.24 36 | height: 0.12-0.13 37 | leadWidth: 0.01-0.02 38 | leadLength: 0.0285-0.0395 39 | leadSpan: 0.443-0.463 40 | leadCount: 8 41 | pitch: 0.05 42 | 43 | padWidth: 0.075 44 | padHeight: 0.025 45 | padSpan: 0.498 46 | -------------------------------------------------------------------------------- /belfuse/README.md: -------------------------------------------------------------------------------- 1 | BELFUSE 2 | ======= 3 | 4 | * **Bel Fuse Inc.** 5 | * http://belfuse.com 6 | -------------------------------------------------------------------------------- /bourns/README.md: -------------------------------------------------------------------------------- 1 | BOURNS 2 | ====== 3 | 4 | * **Bourns, Inc.** 5 | * http://www.bourns.com 6 | -------------------------------------------------------------------------------- /bourns/cat16-f4.yaml: -------------------------------------------------------------------------------- 1 | name: CAT16-F4 2 | decription: Chip Resistor Array 3 | keywords: Resistor, Array 4 | 5 | pinout: 1-8 6 | 7 | groups: 8 | L: 1-4 9 | R: 8-5 10 | 11 | schematic: 12 | symbol: IC 13 | showPinNames: false 14 | left: L 15 | right: R 16 | 17 | housing: 18 | pattern: chip-array 19 | options: concave 20 | bodyWidth: 1.4-1.8 21 | bodyLength: 3-3.4 22 | height: 0.4-0.6 23 | leadWidth: 0.25-0.55 24 | leadLength: 0.15-0.45 25 | leadCount: 8 26 | pitch: 0.8 27 | 28 | padWidth: 0.8 29 | padHeight: 0.42 30 | padSpan: 2.4 31 | -------------------------------------------------------------------------------- /bourns/cra2512.yaml: -------------------------------------------------------------------------------- 1 | name: CRA2512 2 | description: High Power Current Sense Chip Resistor 3 | datasheet: http://www.bourns.com/pdfs/CRA.pdf 4 | keywords: Resistor, 3W 5 | 6 | schematic: 7 | symbol: resistor 8 | 9 | housing: 10 | pattern: chip 11 | bodyLength: 6.25-6.65 12 | bodyWidth: 3.15-3.55 13 | height: 0.5-0.9 14 | leadLength: 0.85-0.105 15 | 16 | padWidth: 2.1 17 | padHeight: 4 18 | padSpace: 4.1 19 | -------------------------------------------------------------------------------- /bourns/srr0603.yaml: -------------------------------------------------------------------------------- 1 | name: SRR0603 2 | description: Shielded Power Inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: molded 10 | bodyWidth: 6.3-6.7 11 | bodyLength: 6.3-6.7 12 | height: 3.3 13 | leadWidth: 1.8-2.2 14 | leadLength: 0.6-0.8 15 | 16 | padWidth: 1.5 17 | padHeight: 2.5 18 | padSpace: 4.5 19 | -------------------------------------------------------------------------------- /bourns/sru8043.yaml: -------------------------------------------------------------------------------- 1 | name: SRU8043 2 | description: Shielded SMD Power Inductor 3 | datasheet: http://www.bourns.com/pdfs/SRU8043.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 7.7-8.3 12 | bodyLength: 7.7-8.3 13 | height: 4-4.6 14 | leadLength: 1 15 | 16 | padWidth: 2 17 | padHeight: 3.2 18 | padSpace: 5.8 19 | -------------------------------------------------------------------------------- /capacitor/c0201.yaml: -------------------------------------------------------------------------------- 1 | name: C0201 2 | description: Chip capacitor 0.6x0.3 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 0.57-0.63 11 | bodyWidth: 0.27-0.33 12 | height: 0.27-0.33 13 | leadLength: 0.1-0.2 14 | -------------------------------------------------------------------------------- /capacitor/c0402.yaml: -------------------------------------------------------------------------------- 1 | name: C0402 2 | description: Chip capacitor 1x0.5 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 0.95-1.05 11 | bodyWidth: 0.45-0.55 12 | height: 0.5-0.6 13 | leadLength: 0.2-0.4 14 | -------------------------------------------------------------------------------- /capacitor/c0603.yaml: -------------------------------------------------------------------------------- 1 | name: C0603 2 | description: Chip capacitor 1.6x0.8 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.45-1.75 11 | bodyWidth: 0.65-0.95 12 | height: 0.78-0.92 13 | leadLength: 0.2-0.5 14 | -------------------------------------------------------------------------------- /capacitor/c0805.yaml: -------------------------------------------------------------------------------- 1 | name: C0805 2 | description: Chip capacitor 2x1.25 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.8-2.2 11 | bodyWidth: 1.05-1.45 12 | height: 1.1-1.4 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /capacitor/c1206.yaml: -------------------------------------------------------------------------------- 1 | name: C1206 2 | description: Chip capacitor 3.2x1.6 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 3-3.4 11 | bodyWidth: 1.4-1.8 12 | height: 1.4-1.8 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /capacitor/c1210.yaml: -------------------------------------------------------------------------------- 1 | name: C1210 2 | description: Chip capacitor 3.2x2.5 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 3-3.4 11 | bodyWidth: 2.3-2.7 12 | height: 1.9-2.3 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /capacitor/c1808.yaml: -------------------------------------------------------------------------------- 1 | name: C1808 2 | description: Chip capacitor 4.7x2 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 4.2-5.2 11 | bodyWidth: 1.8-2.2 12 | height: 0.85-1.15 13 | leadLength: 0.25-0.95 14 | -------------------------------------------------------------------------------- /capacitor/c1812.yaml: -------------------------------------------------------------------------------- 1 | name: C1812 2 | description: Chip capacitor 4.5x3.2 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 4.2-4.8 11 | bodyWidth: 2.9-3.5 12 | height: 1.8-2.2 13 | leadLength: 0.25-0.95 14 | -------------------------------------------------------------------------------- /capacitor/c1825.yaml: -------------------------------------------------------------------------------- 1 | name: C1825 2 | description: Chip capacitor 4.5x6.4 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 4.2-4.8 11 | bodyWidth: 6-6.8 12 | height: 1.4-1.8 13 | leadLength: 0.25-0.95 14 | -------------------------------------------------------------------------------- /capacitor/c2220.yaml: -------------------------------------------------------------------------------- 1 | name: C2220 2 | description: Chip capacitor 5.7x5 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 5.3-6.1 11 | bodyWidth: 4.6-5.4 12 | height: 1.8-2.2 13 | leadLength: 0.25-0.95 14 | -------------------------------------------------------------------------------- /capacitor/c2225.yaml: -------------------------------------------------------------------------------- 1 | name: C2225 2 | description: Chip capacitor 5.6x6.4 mm 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 5.2-6 11 | bodyWidth: 6-6.8 12 | height: 1.25-1.55 13 | leadLength: 0.25-0.95 14 | -------------------------------------------------------------------------------- /capacitor/cae-a.yaml: -------------------------------------------------------------------------------- 1 | name: CAE-A 2 | description: Aluminum electrolytic capacitor case A 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | options: polarized 8 | 9 | housing: 10 | pattern: CAE 11 | bodyDiameter: 2.5-3.5 12 | bodyLength: 3.1-3.5 13 | bodyWidth: 3.1-3.5 14 | height: 5.2-5.5 15 | leadWidth: 0.45-0.65 16 | leadLength: 1.3-1.7 17 | leadSpace: 0.4-0.8 18 | -------------------------------------------------------------------------------- /capacitor/cp-a.yaml: -------------------------------------------------------------------------------- 1 | base: CP3216-18 2 | name: CP-A 3 | -------------------------------------------------------------------------------- /capacitor/cp-b.yaml: -------------------------------------------------------------------------------- 1 | base: CP3528-21 2 | name: CP-B 3 | -------------------------------------------------------------------------------- /capacitor/cp-c.yaml: -------------------------------------------------------------------------------- 1 | base: CP6032-28 2 | name: CP-C 3 | -------------------------------------------------------------------------------- /capacitor/cp-d.yaml: -------------------------------------------------------------------------------- 1 | base: CP7343-31 2 | name: CP-D 3 | -------------------------------------------------------------------------------- /capacitor/cp3216-18.yaml: -------------------------------------------------------------------------------- 1 | name: CP3216-18 2 | description: Polarized capacitor 3.2x1.6 mm (A case) 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | options: polarized 8 | 9 | housing: 10 | pattern: molded 11 | options: polarized 12 | bodyLength: 3-3.4 13 | bodyWidth: 1.4-1.8 14 | height: 1.4-1.8 15 | leadWidth: 1.1-1.3 16 | leadLength: 0.5-1 17 | -------------------------------------------------------------------------------- /capacitor/cp3528-21.yaml: -------------------------------------------------------------------------------- 1 | name: CP3528-21 2 | description: Polarized capacitor 3.5x2.8 mm (B case) 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | options: polarized 8 | 9 | housing: 10 | pattern: molded 11 | options: polarized 12 | bodyLength: 3.3-3.7 13 | bodyWidth: 2.6-3 14 | height: 1.7-2.1 15 | leadWidth: 2.1-2.3 16 | leadLength: 0.5-0.9 17 | -------------------------------------------------------------------------------- /capacitor/cp6032-28.yaml: -------------------------------------------------------------------------------- 1 | name: CP6032-28 2 | description: Polarized capacitor 6x3.2 mm (C case) 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | options: polarized 8 | 9 | housing: 10 | pattern: molded 11 | options: polarized 12 | bodyLength: 5.7-6.3 13 | bodyWidth: 2.9-3.5 14 | height: 2.2-2.8 15 | leadWidth: 2.1-2.3 16 | leadLength: 1-1.6 17 | -------------------------------------------------------------------------------- /capacitor/cp7343-31.yaml: -------------------------------------------------------------------------------- 1 | name: CP7343-31 2 | description: Polarized capacitor 7.3x4.3 mm (D case) 3 | keywords: Capacitor 4 | 5 | schematic: 6 | symbol: capacitor 7 | options: polarized 8 | 9 | housing: 10 | pattern: molded 11 | options: polarized 12 | bodyLength: 7-7.6 13 | bodyWidth: 4-4.6 14 | height: 2.5-3.1 15 | leadWidth: 2.3-2.5 16 | leadLength: 1-1.6 17 | -------------------------------------------------------------------------------- /ck/README.md: -------------------------------------------------------------------------------- 1 | CK 2 | == 3 | 4 | * **C&K Components, Inc.** 5 | * http://www.ck-components.com 6 | -------------------------------------------------------------------------------- /ck/kmr2.yaml: -------------------------------------------------------------------------------- 1 | name: KMR2 2 | suffix: 11LFS, 13LFG, 21LFS, 23GLFG, 31LFS, 33GLFG, 31ULCLFS, 32LFS, 32ULCLFS, 41LFS, 43GLFG, 41ULCLFS, 42LFS, 42ULCLFS 3 | description: Microminiature SMT Top Actuated Pushbutton 4 | datasheet: http://www.ckswitches.com/media/1479/kmr2.pdf 5 | keywords: Pushbutton 6 | 7 | pinout: 8 | S1: 1, 2 9 | S2: 3, 4 10 | CASE: 5 11 | 12 | schematic: 13 | symbol: pushbutton 14 | left: S1 15 | right: S2 16 | bottom: CASE 17 | 18 | housing: 19 | pattern: custom 20 | bodyWidth: 4.2 21 | bodyLength: 2.8 22 | height: 1.9 23 | 24 | padWidth: 0.9 25 | padHeight: 1 26 | rowCount: 2 27 | columnCount: 2 28 | horizontalPitch: 4.1 29 | verticalPitch: 1.6 30 | 31 | padWidth1: 1.7 32 | padHeight1: 0.55 33 | padPosition1: 0, -1.425 34 | -------------------------------------------------------------------------------- /ck/os102011ma1qn1.yaml: -------------------------------------------------------------------------------- 1 | name: OS102011MA1QN1 2 | description: Miniature Slide Switch 3 | datasheet: http://www.ckswitches.com/media/1428/os.pdf 4 | keywords: Switch, SPDT, Non-shorting 5 | 6 | pinout: 7 | SW: 8 | L2: 3 9 | COM: 2 10 | L1: 1 11 | C1: 4 12 | C2: 5 13 | 14 | schematic: 15 | symbol: switch 16 | right: SW 17 | top: C2 18 | bottom: C1 19 | 20 | housing: 21 | pattern: custom 22 | options: polarized 23 | bodyWidth: 8.6 24 | bodyLength: 4.4 25 | height: 4.7 26 | bodyColor: silver 27 | silkscreen: M -2 2.2 -2 6.35 0 6.35 0 2.2 28 | 29 | holeDiameter: 0.8 30 | pitch: 2 31 | rowCount: 1 32 | columnCount: 3 33 | 34 | holeDiameter1: 1.5 35 | pitch1: 8.2 36 | rowCount1: 1 37 | columnCount1: 2 38 | -------------------------------------------------------------------------------- /connector/din-8p.yaml: -------------------------------------------------------------------------------- 1 | name: DIN-8P 2 | description: 8-Pin Circular DIN Female Connector 3 | keywords: Connector, Female 4 | 5 | pinout: 1-10 6 | 7 | schematic: 8 | symbol: connector 9 | right: 1-8 10 | 11 | properties: 12 | nc: 9-10 13 | 14 | housing: 15 | pattern: custom 16 | options: polarized 17 | bodyWidth: 19 18 | bodyLength: 21.4 19 | height: 19.7 20 | 21 | holeDiameter: 1.2 22 | padPosition: -3, -7.5, -3, 0, -3, 7.5, -5.5, -5, -5.5, 5, -8, -7.5, -8, 7.5, -8, 0, 6.7, -5, 6.7, 5 23 | -------------------------------------------------------------------------------- /connfly/ds1021-1x6s.yaml: -------------------------------------------------------------------------------- 1 | name: DS1021-1x6S 2 | description: 2.54 mm Pin Header Single Row, 6 Circuits 3 | datasheet: http://www.connfly.com/userfiles/image/UpLoadFile/File/2015/1/29/DS1021.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-6 7 | 8 | schematic: 9 | symbol: connector 10 | options: single 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 2.54 16 | bodyLength: 15.24 17 | height: 8.35 18 | 19 | holeDiameter: 1 20 | pitch: 2.54 21 | rowCount: 6 22 | columnCount: 1 23 | -------------------------------------------------------------------------------- /crpowtech/pt4115e.yaml: -------------------------------------------------------------------------------- 1 | name: PT4115E 2 | description: 30V, 1.2A Step-down High Brightness LED Driver with 5000:1 Dimming 3 | datasheet: http://www.micro-bridge.com/data/CRpowtech/PT4115E.pdf 4 | keywords: IC, Analog, Driver 5 | 6 | pinout: 7 | SW: 1 8 | GND: 2 9 | DIM: 3 10 | CSN: 4 11 | VIN: 5 12 | 13 | properties: 14 | in: DIM 15 | out: SW 16 | passive: CSN 17 | power: VIN 18 | ground: GND 19 | 20 | schematic: 21 | symbol: IC 22 | left: DIM 23 | right: CSN, SW 24 | top: VIN 25 | bottom: GND 26 | 27 | housing: 28 | pattern: SOT89-5 29 | bodyWidth: 2.3-2.6 30 | bodyLength: 4.4-4.6 31 | height: 1.4-1.6 32 | leadLength: 0.9-1.1 33 | leadWidth1: 0.32-0.52 34 | leadWidth2: 1.4-1.8 35 | leadSpan: 4.35 36 | pitch: 1.5 37 | 38 | padWidth1: 1.5 39 | padHeight1: 0.7 40 | padWidth2: 1.5 41 | padHeight2: 1 42 | padDistance: 3.7 43 | -------------------------------------------------------------------------------- /cypress/README.md: -------------------------------------------------------------------------------- 1 | CYPRESS 2 | ======= 3 | 4 | * **Cypress Semiconductor Corp.** 5 | * http://www.cypress.com 6 | -------------------------------------------------------------------------------- /cypress/cy15b102q.yaml: -------------------------------------------------------------------------------- 1 | name: CY15B102Q 2 | description: 2-Mbit (256 K × 8) Serial (SPI) Automotive F-RAM 3 | datasheet: http://www.cypress.com/file/175751/download 4 | keywords: IC, Digital, NVRAM 5 | 6 | pinout: 7 | CONTROL: 8 | ~WP: 3 9 | ~CS: 1 10 | ~HOLD: 7 11 | SPI: 12 | SCK: 6 13 | SI: 5 14 | SO: 2 15 | VDD: 8 16 | VSS: 4 17 | 18 | properties: 19 | in: ~WP, ~CS, ~HOLD, SCK, SI 20 | out: SO 21 | power: VDD 22 | ground: VSS 23 | inverted: ~WP, ~CS, ~HOLD 24 | 25 | schematic: 26 | symbol: IC 27 | left: CONTROL 28 | right: SPI 29 | top: VDD 30 | bottom: VSS 31 | 32 | housing: 33 | pattern: SOIC 34 | suffix: -S 35 | bodyWidth: 5.13-5.33 36 | bodyLength: 5.13-5.33 37 | height: 2.03 38 | leadWidth: 0.36-0.48 39 | leadLength: 0.51-0.76 40 | leadSpan: 7.75-8.26 41 | leadCount: 8 42 | -------------------------------------------------------------------------------- /diode/bas40-04.yaml: -------------------------------------------------------------------------------- 1 | name: BAS40-04 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | A: 1 7 | CA: 3 8 | C: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bas40-05.yaml: -------------------------------------------------------------------------------- 1 | name: BAS40-05 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | A1: 1 7 | C: 3 8 | A2: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bas40-06.yaml: -------------------------------------------------------------------------------- 1 | name: BAS40-06 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | C1: 1 7 | A: 3 8 | C2: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bas70-04.yaml: -------------------------------------------------------------------------------- 1 | name: BAS70-04 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | A: 1 7 | CA: 3 8 | C: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bas70-05.yaml: -------------------------------------------------------------------------------- 1 | name: BAS70-05 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | A1: 1 7 | C: 3 8 | A2: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bas70-06.yaml: -------------------------------------------------------------------------------- 1 | name: BAS70-06 2 | description: Small Signal Schottky Diodes, Dual 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | C1: 1 7 | A: 3 8 | C2: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/bzx84.yaml: -------------------------------------------------------------------------------- 1 | name: BZX84 2 | description: Voltage Regulator diode 3 | keywords: Diode, Zener 4 | 5 | pinout: 6 | A: 1 7 | C: 3 8 | NC: 2 9 | 10 | schematic: 11 | symbol: diode 12 | options: zener 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | -------------------------------------------------------------------------------- /diode/d-mma.yaml: -------------------------------------------------------------------------------- 1 | name: D-MMA 2 | description: MiniMelf Diode (MMA) 3 | keywords: Diode 4 | 5 | schematic: 6 | symbol: diode 7 | 8 | housing: 9 | pattern: MELF 10 | options: polarized 11 | bodyDiameter: 1.3-1.4 12 | bodyLength: 3.4-3.6 13 | leadLength: 0.65-0.85 14 | -------------------------------------------------------------------------------- /diode/d-mmb.yaml: -------------------------------------------------------------------------------- 1 | name: D-MMB 2 | description: Melf Diode (MMB) 3 | keywords: Diode 4 | 5 | schematic: 6 | symbol: diode 7 | 8 | housing: 9 | pattern: MELF 10 | options: polarized 11 | bodyDiameter: 2-2.2 12 | bodyLength: 5.65-5.8 13 | leadLength: 1-1.2 14 | -------------------------------------------------------------------------------- /diode/d-mmu.yaml: -------------------------------------------------------------------------------- 1 | name: D-MMU 2 | description: MicroMelf Diode (MMU) 3 | keywords: Diode 4 | 5 | schematic: 6 | symbol: diode 7 | 8 | housing: 9 | pattern: MELF 10 | options: polarized 11 | bodyDiameter: 1-1.1 12 | bodyLength: 2.1-2.2 13 | leadLength: 0.35-0.45 14 | -------------------------------------------------------------------------------- /diode/led0603.yaml: -------------------------------------------------------------------------------- 1 | name: LED0603 2 | description: Chip LED 1.6x0.8 mm 3 | keywords: LED 4 | 5 | schematic: 6 | symbol: LED 7 | 8 | housing: 9 | pattern: chip 10 | options: polarized 11 | bodyLength: 1.5-1.7 12 | bodyWidth: 0.7-0.9 13 | height: 0.7-0.9 14 | leadLength: 0.3 15 | -------------------------------------------------------------------------------- /diode/m1.yaml: -------------------------------------------------------------------------------- 1 | name: M1 2 | description: Surface Mount Rectifier 3 | keywords: Diode 4 | 5 | schematic: 6 | symbol: diode 7 | 8 | housing: 9 | outline: JEDEC DO-214 AC 10 | options: polarized 11 | -------------------------------------------------------------------------------- /diode/m2.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M2 3 | -------------------------------------------------------------------------------- /diode/m3.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M3 3 | -------------------------------------------------------------------------------- /diode/m4.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M4 3 | -------------------------------------------------------------------------------- /diode/m5.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M5 3 | -------------------------------------------------------------------------------- /diode/m6.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M6 3 | -------------------------------------------------------------------------------- /diode/m7.yaml: -------------------------------------------------------------------------------- 1 | base: M1 2 | name: M7 3 | -------------------------------------------------------------------------------- /diode/ss12.yaml: -------------------------------------------------------------------------------- 1 | name: SS12 2 | description: Surface Mount Schottky Barrier Rectifier 3 | keywords: Diode, Schottky 4 | 5 | schematic: 6 | symbol: diode 7 | options: schottky 8 | 9 | housing: 10 | outline: JEDEC DO-214 AC 11 | options: polarized 12 | -------------------------------------------------------------------------------- /diode/ss13.yaml: -------------------------------------------------------------------------------- 1 | base: SS12 2 | name: SS13 3 | -------------------------------------------------------------------------------- /diode/ss14.yaml: -------------------------------------------------------------------------------- 1 | base: SS12 2 | name: SS14 3 | -------------------------------------------------------------------------------- /diode/ss15.yaml: -------------------------------------------------------------------------------- 1 | base: SS12 2 | name: SS15 3 | -------------------------------------------------------------------------------- /diode/ss16.yaml: -------------------------------------------------------------------------------- 1 | base: SS12 2 | name: SS16 3 | -------------------------------------------------------------------------------- /diode/ss32.yaml: -------------------------------------------------------------------------------- 1 | name: SS32 2 | description: Surface Mount Schottky Barrier Rectifier 3 | keywords: Diode, Schottky 4 | 5 | schematic: 6 | symbol: diode 7 | options: schottky 8 | 9 | housing: 10 | outline: JEDEC DO-214 AB 11 | options: polarized 12 | -------------------------------------------------------------------------------- /diode/ss33.yaml: -------------------------------------------------------------------------------- 1 | base: SS32 2 | name: SS33 3 | -------------------------------------------------------------------------------- /diode/ss34.yaml: -------------------------------------------------------------------------------- 1 | base: SS32 2 | name: SS34 3 | -------------------------------------------------------------------------------- /diode/ss35.yaml: -------------------------------------------------------------------------------- 1 | base: SS32 2 | name: SS35 3 | -------------------------------------------------------------------------------- /diode/ss36.yaml: -------------------------------------------------------------------------------- 1 | base: SS32 2 | name: SS36 3 | -------------------------------------------------------------------------------- /diodes/README.md: -------------------------------------------------------------------------------- 1 | DIODES 2 | ====== 3 | 4 | * **Diodes Incorporated** 5 | * http://www.diodes.com 6 | -------------------------------------------------------------------------------- /diodes/b340a.yaml: -------------------------------------------------------------------------------- 1 | name: B340A 2 | description: 3.0A Surface Mount Schottky Barrier Rectifier 3 | datasheet: https://www.diodes.com/assets/Datasheets/ds30891.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AC 12 | options: polarized 13 | 14 | padWidth: 2.5 15 | padHeight: 1.7 16 | padDistance: 4 17 | -------------------------------------------------------------------------------- /diodes/b560c.yaml: -------------------------------------------------------------------------------- 1 | name: B560C 2 | description: 5.0A Surface Mount Schottky Barrier Rectifier 3 | datasheet: http://www.diodes.com/_files/datasheets/ds13012.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AB 12 | options: polarized 13 | 14 | padWidth: 2.5 15 | padHeight: 3.3 16 | padDistance: 6.9 17 | -------------------------------------------------------------------------------- /ecs/README.md: -------------------------------------------------------------------------------- 1 | ECS 2 | === 3 | 4 | * **ECS Inc. International** 5 | * http://www.ecsxtal.com 6 | -------------------------------------------------------------------------------- /ecs/csm-7.yaml: -------------------------------------------------------------------------------- 1 | name: CSM-7 2 | description: SMD Quartz Crystal 3 | datasheet: http://www.ecsxtal.com/store/pdf/csm_7.pdf 4 | keywords: Crystal 5 | 6 | schematic: 7 | symbol: crystal 8 | 9 | housing: 10 | pattern: crystal 11 | bodyLength: 11.3-11.5 12 | bodyWidth: 4.8 13 | height: 4.3 14 | leadWidth: 0.51-0.75 15 | leadLength: 4.4 16 | leadSpan: 13.2 17 | 18 | padWidth: 5.5 19 | padHeight: 2 20 | padSpace: 4 21 | -------------------------------------------------------------------------------- /ecs/ecx-33q.yaml: -------------------------------------------------------------------------------- 1 | name: ECX-33Q 2 | description: AEC-Q200 Qualified Miniature SMD Crystal 3 | datasheet: https://www.ecsxtal.com/store/pdf/ECX-33Q.pdf 4 | keywords: Crystal 5 | 6 | pinout: 7 | X1: 1 8 | X2: 3 9 | CASE: 2, 4 10 | 11 | properties: 12 | passive: X1-2, CASE 13 | 14 | schematic: 15 | symbol: crystal 16 | left: X1 17 | right: X2 18 | bottom: CASE 19 | 20 | housing: 21 | pattern: oscillator 22 | options: corner-concave 23 | bodyWidth: 2.4-2.6 24 | bodyLength: 3.1-3.3 25 | height: 0.8 26 | leadWidth: 0.9 27 | leadLength: 0.8 28 | rowSpan: 2.3 29 | columnSpan: 3 30 | 31 | padWidth: 1.1 32 | padHeight: 1.3 33 | padDistance1: 1.8 34 | padDistance2: 2.3 35 | -------------------------------------------------------------------------------- /espressif/README.md: -------------------------------------------------------------------------------- 1 | ESPRESSIF 2 | ========= 3 | 4 | * **Espressif Systems (Shanghai) Pte. Ltd.** 5 | * http://espressif.com 6 | -------------------------------------------------------------------------------- /fairchild/README.md: -------------------------------------------------------------------------------- 1 | FAIRCHILD 2 | ========= 3 | 4 | * **Fairchild Semiconductor** 5 | * https://www.fairchildsemi.com 6 | -------------------------------------------------------------------------------- /fairchild/mbr0520l.yaml: -------------------------------------------------------------------------------- 1 | name: MBR0520L 2 | description: Schottky Rectifier 3 | keywords: Diode, Schottky 4 | 5 | schematic: 6 | symbol: diode 7 | options: schottky 8 | 9 | housing: 10 | outline: JEDEC DO-215 AD 11 | options: polarized 12 | 13 | padWidth: 0.88 14 | padHeight: 1.02 15 | padDistance: 3.27 16 | -------------------------------------------------------------------------------- /fairchild/nc7wz07.yaml: -------------------------------------------------------------------------------- 1 | name: NC7WZ07 2 | description: TinyLogic UHS Dual Buffer (Open-Drain Outputs) 3 | datasheet: https://www.fairchildsemi.com/datasheets/NC/NC7WZ07.pdf 4 | keywords: IC, Analog, Buffer 5 | 6 | pinout: 7 | IN: 8 | A1-2: 1, 3 9 | OUT: 10 | Y1-2: 6, 4 11 | VCC: 5 12 | GND: 2 13 | 14 | properties: 15 | in: A1-2 16 | out: Y1-2 17 | power: VCC 18 | ground: GND 19 | 20 | schematic: 21 | symbol: IC 22 | left: IN 23 | right: OUT 24 | top: VCC 25 | bottom: GND 26 | 27 | housing: 28 | outline: JEITA SC-70 29 | leadCount: 6 30 | 31 | padWidth: 0.5 32 | padHeight: 0.4 33 | padDistance: 1.9 34 | -------------------------------------------------------------------------------- /harting/02021601301.yaml: -------------------------------------------------------------------------------- 1 | base: '02021601202' 2 | name: '02021601301' 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0202160X301_100070213DRW017D.pdf 4 | -------------------------------------------------------------------------------- /harting/09181409622.yaml: -------------------------------------------------------------------------------- 1 | name: '09181409622' 2 | description: SEK 2 Rows 40-pole Straight Pin Assembly 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0918140962X_100647412DRW000A.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-40 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 6 16 | bodyLength: 56.1 17 | height: 6 18 | 19 | holeDiameter: 0.9 20 | pitch: 2.54 21 | rowCount: 20 22 | columnCount: 2 23 | -------------------------------------------------------------------------------- /harting/09185647904.yaml: -------------------------------------------------------------------------------- 1 | name: '09185647904' 2 | description: SEK 18 Male Standard Connector Straight with Long Lever 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/09185XXX904_100154464DRW017A.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-64 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.5 16 | bodyLength: 100.9 17 | height: 25.75 18 | 19 | holeDiameter: 1 20 | pitch: 2.54 21 | rowCount: 32 22 | columnCount: 2 23 | 24 | holeDiameter1: 3 25 | padDiameter1: 0 26 | pitch1: 96.52 27 | rowCount1: 2 28 | columnCount1: 1 29 | -------------------------------------------------------------------------------- /harting/09561527613.yaml: -------------------------------------------------------------------------------- 1 | name: '09561527613' 2 | description: D-Sub HD 15P Female Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956152X613_100510341DRW001D.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 1-17 7 | 8 | schematic: 9 | symbol: connector 10 | right: 1-15 11 | top: 16 12 | bottom: 17 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 30.8 17 | bodyLength: 16.2 18 | height: 12.55 19 | bodyPosition: 0, -3.33 20 | 21 | holeDiameter1: 1 22 | rowCount1: 3 23 | columnCount1: 5 24 | horizontalPitch1: 2.29 25 | verticalPitch1: -2.54 26 | rowDX1: 0.25, -0.89, 0.25 27 | 28 | holeDiameter2: 3.4 29 | padPosition2: -12.5, 0, 12.5, 0 30 | -------------------------------------------------------------------------------- /harting/09562527613.yaml: -------------------------------------------------------------------------------- 1 | name: '09562527613' 2 | description: D-Sub HD 26P Female Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956252X613_100510343DRW001D.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 1-28 7 | 8 | schematic: 9 | symbol: connector 10 | right: 1-26 11 | top: 27 12 | bottom: 28 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 39.2 17 | bodyLength: 16.2 18 | height: 12.55 19 | bodyPosition: 0, -3.33 20 | 21 | holeDiameter1: 1 22 | rowCount1: 3 23 | columnCount1: 9, 9, 8 24 | horizontalPitch1: 2.29 25 | verticalPitch1: -2.54 26 | rowDX1: 0.51, -0.64, -0.64 27 | 28 | holeDiameter2: 3.4 29 | padPosition2: -16.65, 0, 16.65, 0 30 | -------------------------------------------------------------------------------- /harting/09562627813.yaml: -------------------------------------------------------------------------------- 1 | name: '09562627813' 2 | description: D-Sub HD 26P Male Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956262X813_100510354DRW001D.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-28 7 | 8 | schematic: 9 | symbol: connector 10 | right: 1-26 11 | top: 27 12 | bottom: 28 13 | 14 | housing: 15 | pattern: custom 16 | bodyWidth: 39.2 17 | bodyLength: 16.1 18 | height: 12.55 19 | bodyPosition: 0, -3.38 20 | 21 | holeDiameter1: 1 22 | rowCount1: 3 23 | columnCount1: 9, 9, 8 24 | horizontalPitch1: -2.29 25 | verticalPitch1: -2.54 26 | rowDX1: -0.51, 0.64, 0.64 27 | 28 | holeDiameter2: 3.4 29 | padPosition2: -16.65, 0, 16.65, 0 30 | -------------------------------------------------------------------------------- /harting/09563527613.yaml: -------------------------------------------------------------------------------- 1 | name: '09563527613' 2 | description: D-Sub HD 44P Female Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956352X613_100510346DRW001D.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 7 | ROW1: 8 | '': 1-15 9 | ROW2: 10 | '': 16-30 11 | ROW3: 12 | '': 31-46 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | right: ROW1-3 22 | 23 | housing: 24 | pattern: custom 25 | bodyWidth: 53.05 26 | bodyLength: 16.2 27 | height: 12.55 28 | bodyPosition: 0, -3.33 29 | 30 | holeDiameter1: 1 31 | rowCount1: 3 32 | columnCount1: 15, 15, 14 33 | horizontalPitch1: 2.29 34 | verticalPitch1: -2.54 35 | rowDX1: 0.51, -0.64, -0.64 36 | 37 | holeDiameter2: 3.4 38 | padPosition2: -23.5, 0, 23.5, 0 39 | -------------------------------------------------------------------------------- /harting/09564527613.yaml: -------------------------------------------------------------------------------- 1 | name: '09564527613' 2 | description: D-Sub HD 62P Female Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956452X613_100510348DRW001D.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 7 | ROW1: 8 | '': 1-21 9 | ROW2: 10 | '': 22-42 11 | ROW3: 12 | '': 43-64 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | right: ROW1-3 22 | 23 | housing: 24 | pattern: custom 25 | bodyWidth: 69.4 26 | bodyLength: 16.2 27 | height: 12.55 28 | bodyPosition: 0, -3.33 29 | 30 | holeDiameter1: 1 31 | rowCount1: 3 32 | columnCount1: 21, 21, 20 33 | horizontalPitch1: 2.41 34 | verticalPitch1: -2.54 35 | rowDX1: 0.58, -0.62, -0.62 36 | 37 | holeDiameter2: 3.4 38 | padPosition2: -31.75, 0, 31.75, 0 39 | -------------------------------------------------------------------------------- /harting/09564627813.yaml: -------------------------------------------------------------------------------- 1 | name: '09564627813' 2 | description: D-Sub HD 62P Male Angled Screw Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0956462X813_100510358DRW001D.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 7 | ROW1: 8 | '': 1-21 9 | ROW2: 10 | '': 22-42 11 | ROW3: 12 | '': 43-64 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | right: ROW1-3 22 | 23 | housing: 24 | pattern: custom 25 | bodyWidth: 69.4 26 | bodyLength: 16.1 27 | height: 12.55 28 | bodyPosition: 0, -3.38 29 | 30 | holeDiameter1: 1 31 | rowCount1: 3 32 | columnCount1: 21, 21, 20 33 | horizontalPitch1: -2.41 34 | verticalPitch1: -2.54 35 | rowDX1: -0.58, 0.62, 0.62 36 | 37 | holeDiameter2: 3.4 38 | padPosition2: -31.75, 0, 31.75, 0 39 | -------------------------------------------------------------------------------- /harting/09682537613.yaml: -------------------------------------------------------------------------------- 1 | name: '09682537613' 2 | description: D-Sub STD 15P Female Angled Board Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0968253X613_100539808DRW001C.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 1-17 7 | 8 | schematic: 9 | symbol: connector 10 | left: 1-8 11 | right: 9-15 12 | top: 16 13 | bottom: 17 14 | 15 | housing: 16 | pattern: custom 17 | bodyWidth: 39.2 18 | bodyLength: 12 19 | height: 12.55 20 | bodyPosition: 0, -3.5 21 | 22 | holeDiameter1: 1.1 23 | rowCount1: 2 24 | columnCount1: 8, 7 25 | horizontalPitch1: 2.77 26 | verticalPitch1: -2.84 27 | 28 | holeDiameter2: 3.1 29 | padPosition2: -16.65, 0, 16.65, 0 30 | -------------------------------------------------------------------------------- /harting/09682637813.yaml: -------------------------------------------------------------------------------- 1 | name: '09682637813' 2 | description: D-Sub STD 15P Male Angled Board Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0968263X813_100539978DRW001B.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-17 7 | 8 | schematic: 9 | symbol: connector 10 | left: 1-8 11 | right: 9-15 12 | top: 16 13 | bottom: 17 14 | 15 | housing: 16 | pattern: custom 17 | bodyWidth: 39.2 18 | bodyLength: 12 19 | height: 12.55 20 | bodyPosition: 0, -3.5 21 | 22 | holeDiameter1: 1.1 23 | rowCount1: 2 24 | columnCount1: 8, 7 25 | horizontalPitch1: -2.77 26 | verticalPitch1: -2.84 27 | 28 | holeDiameter2: 3.1 29 | padPosition2: -16.65, 0, 16.65, 0 30 | -------------------------------------------------------------------------------- /harting/09684537613.yaml: -------------------------------------------------------------------------------- 1 | name: '09684537613' 2 | description: D-Sub STD 37P Female Angled Board Locks 3 | datasheet: https://b2b.harting.com/files/download/PRD/PDF_TS/0968453X613_100539810DRW001C.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 1-39 7 | 8 | schematic: 9 | symbol: connector 10 | left: 1-19 11 | right: 20-37 12 | top: 38 13 | bottom: 39 14 | 15 | housing: 16 | pattern: custom 17 | bodyWidth: 69.4 18 | bodyLength: 12 19 | height: 12.55 20 | bodyPosition: 0, -3.5 21 | 22 | holeDiameter1: 1.1 23 | rowCount1: 2 24 | columnCount1: 19, 18 25 | horizontalPitch1: 2.77 26 | verticalPitch1: -2.84 27 | 28 | holeDiameter2: 3.1 29 | padPosition2: -31.78, 0, 31.78, 0 30 | -------------------------------------------------------------------------------- /harting/README.md: -------------------------------------------------------------------------------- 1 | HARTING 2 | ======= 3 | 4 | * **HARTING Technology Group** 5 | * http://www.harting.com 6 | -------------------------------------------------------------------------------- /hirose/README.md: -------------------------------------------------------------------------------- 1 | HIROSE 2 | ====== 3 | 4 | * **Hirose Electric Co., Ltd.** 5 | * https://www.hirose.com 6 | -------------------------------------------------------------------------------- /hirose/df12-4.0-36dp-0.5v.yaml: -------------------------------------------------------------------------------- 1 | name: DF12-4.0-36DP-0.5V 2 | description: 0.5mm Pitch SMT Board-to-Board Connector, 36 pin 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF12%284.0%29%2D20DP%2D0.5V%2886%29/category/Drawing%20(2D)/doc_file_id/38463/?file_category_id=6&item_id=05370053486&is_series= 4 | keywords: Connector, Female 5 | 6 | pinout: 1-36 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 3.6-4 16 | bodyLength: 11-11.4 17 | height: 3.1-3.5 18 | 19 | padWidth1: 2.6 20 | padHeight1: 0.3 21 | rowCount1: 18 22 | columnCount1: 2 23 | verticalPitch1: 0.5 24 | horizontalPitch1: -4.6 25 | 26 | padWidth2: 1.8 27 | padHeight2: 0.8 28 | padPosition2: 0, -6, 0, 6 29 | 30 | holeDiameter3: 0.6 31 | padDiameter3: 0 32 | padPosition3: 1.5, -5.3, 1.5, 5.3 33 | -------------------------------------------------------------------------------- /hirose/df13-2p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-2P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-4 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-2 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 3.95-4.35 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 2 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -2.875, 0, 2.875, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -1.675, 1.9, 1.675, 1.9 35 | -------------------------------------------------------------------------------- /hirose/df13-3p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-3P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-5 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-3 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 5.2-5.6 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 3 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -3.6, 0, 3.6, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -2.3, 1.9, 2.3, 1.9 35 | -------------------------------------------------------------------------------- /hirose/df13-4p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-4P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-6 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-4 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 6.45-6.85 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 4 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -4.225, 0, 4.225, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -2.925, 1.9, 2.925, 1.9 35 | -------------------------------------------------------------------------------- /hirose/df13-5p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-5P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-7 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-5 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 7.7-8.1 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 5 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -4.85, 0, 4.85, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -3.55, 1.9, 3.55, 1.9 35 | -------------------------------------------------------------------------------- /hirose/df13-6p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-6P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-8 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-6 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 8.95-9.35 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 6 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -5.475, 0, 5.475, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -4.175, 1.9, 4.175, 1.9 35 | -------------------------------------------------------------------------------- /hirose/df13-7p-1.25h.yaml: -------------------------------------------------------------------------------- 1 | name: DF13-7P-1.25H 2 | description: 1.25mm Pitch Miniature Crimping Connector 3 | datasheet: https://www.hirose.com/product/en/download_file/key_name/DF13%2D6P%2D1.25H%2820%29/category/Drawing%20(2D)/doc_file_id/38245/?file_category_id=6&item_id=05360255220&is_series= 4 | keywords: Connector, Male 5 | 6 | pinout: 1-9 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-7 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 10.2-10.6 17 | bodyLength: 4.8-5.2 18 | height: 3.45-3.75 19 | bodyPosition: 0, -0.2 20 | 21 | padWidth1: 0.7 22 | padHeight1: 1.8 23 | rowCount1: 1 24 | rowDY1: 3.3 25 | columnCount1: 7 26 | horizontalPitch1: 1.25 27 | 28 | padWidth2: 1.6 29 | padHeight2: 2.2 30 | padPosition2: -6.1, 0, 6.1, 0 31 | 32 | holeDiameter3: 0.9 33 | padDiameter3: 0 34 | padPosition3: -4.8, 1.9, 4.8, 1.9 35 | -------------------------------------------------------------------------------- /inductor/cd43.yaml: -------------------------------------------------------------------------------- 1 | name: CD43 2 | description: SMD Power Inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyWidth: 3.7-4.3 11 | bodyLength: 4.2-4.8 12 | height: 2.9-3.5 13 | leadLength: 1.65 14 | 15 | padWidth: 1.75 16 | padHeight: 4.5 17 | padSpace: 1.5 18 | -------------------------------------------------------------------------------- /inductor/cd54.yaml: -------------------------------------------------------------------------------- 1 | name: CD54 2 | description: SMD Power Inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyWidth: 4.9-5.5 11 | bodyLength: 5.5-6.1 12 | height: 4.15-4.85 13 | leadLength: 2.25 14 | 15 | padWidth: 2.15 16 | padHeight: 5.5 17 | padSpace: 1.7 18 | -------------------------------------------------------------------------------- /inductor/cd75.yaml: -------------------------------------------------------------------------------- 1 | name: CD75 2 | description: SMD Power Inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyWidth: 6.7-7.3 11 | bodyLength: 7.5-8.1 12 | height: 4.5-5.5 13 | leadLength: 2.85 14 | 15 | padWidth: 2 16 | padHeight: 7.5 17 | padSpace: 2 18 | -------------------------------------------------------------------------------- /inductor/l0402.yaml: -------------------------------------------------------------------------------- 1 | name: L0402 2 | description: Chip inductor 1x0.5 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 0.95-1.05 11 | bodyWidth: 0.45-0.55 12 | height: 0.45-0.55 13 | leadLength: 0.15-0.35 14 | -------------------------------------------------------------------------------- /inductor/l0603.yaml: -------------------------------------------------------------------------------- 1 | name: L0603 2 | description: Chip inductor 1.6x0.8 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.45-1.75 11 | bodyWidth: 0.65-0.95 12 | height: 0.65-0.95 13 | leadLength: 0.2-0.6 14 | -------------------------------------------------------------------------------- /inductor/l0805.yaml: -------------------------------------------------------------------------------- 1 | name: L0805 2 | description: Chip inductor 2x1.25 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.8-2.2 11 | bodyWidth: 1.05-1.45 12 | height: 0.65-1.05 13 | leadLength: 0.3-0.7 14 | -------------------------------------------------------------------------------- /inductor/l0806.yaml: -------------------------------------------------------------------------------- 1 | name: L0806 2 | description: Chip inductor 2x1.6 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.85-2.15 11 | bodyWidth: 1.45-1.75 12 | height: 0.8-1 13 | leadLength: 0.3-0.7 14 | -------------------------------------------------------------------------------- /inductor/l1008.yaml: -------------------------------------------------------------------------------- 1 | name: L1008 2 | description: Chip inductor 2.5x2 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 2.3-2.7 11 | bodyWidth: 1.8-2.2 12 | height: 1-1.2 13 | leadLength: 0.4-0.8 14 | -------------------------------------------------------------------------------- /inductor/l1206.yaml: -------------------------------------------------------------------------------- 1 | name: L1206 2 | description: Chip inductor 3.2x1.6 mm 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 3-3.4 11 | bodyWidth: 1.4-1.8 12 | height: 0.9-1.3 13 | leadLength: 0.4-1 14 | -------------------------------------------------------------------------------- /infineon/README.md: -------------------------------------------------------------------------------- 1 | INFINEON 2 | ======== 3 | 4 | * **Infineon Technologies AG** 5 | * http://www.infineon.com 6 | -------------------------------------------------------------------------------- /irf/README.md: -------------------------------------------------------------------------------- 1 | IRF 2 | === 3 | 4 | * **International Rectifier Corporation** (aquired by **Infineon Technologies North America Corp.**) 5 | * http://irf.com 6 | -------------------------------------------------------------------------------- /irf/auirfs8409-7p.yaml: -------------------------------------------------------------------------------- 1 | name: AUIRFS8409-7P 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/auirfs8409-7p.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 8 9 | S: 2, 3, 5-7 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: n, diode 18 | 19 | housing: 20 | outline: JEDEC TO-263 CB 21 | -------------------------------------------------------------------------------- /irf/ir2101s.yaml: -------------------------------------------------------------------------------- 1 | name: IR2101S 2 | description: High and Low Side Driver 3 | datasheet: http://www.infineon.com/dgdl/ir2101.pdf?fileId=5546d462533600a4015355c7a755166c 4 | keywords: IC, Analog, Driver 5 | 6 | pinout: 7 | IN: 8 | HIN: 2 9 | LIN: 3 10 | HISIDE: 11 | VB: 8 12 | HO: 7 13 | VS: 6 14 | LOSIDE: 15 | LO: 5 16 | 17 | VCC: 1 18 | COM: 4 19 | 20 | 21 | properties: 22 | in: HIN, VIN 23 | out: HO, LO 24 | power: VCC, VB, VS 25 | ground: COM 26 | 27 | schematic: 28 | symbol: IC 29 | left: IN 30 | right: HISIDE, LOSIDE 31 | top: VCC 32 | bottom: COM 33 | 34 | housing: 35 | outline: JEDEC MS-012 AA 36 | -------------------------------------------------------------------------------- /irf/ir2113s.yaml: -------------------------------------------------------------------------------- 1 | name: IR2113S 2 | suffix: -1, -2 3 | description: High and Low Side Driver 4 | datasheet: http://www.irf.com/product-info/datasheets/data/ir2110.pdf 5 | keywords: IC, Analog, Driver 6 | 7 | pinout: 8 | CONTROL: 9 | VDD: 11 10 | HIN: 12 11 | SD: 13 12 | LIN: 14 13 | VSS: 15 14 | HISIDE: 15 | HO: 8 16 | VB: 7 17 | VS: 6 18 | LOSIDE: 19 | VCC: 3 20 | COM: 2 21 | LO: 1 22 | NC: 4, 5, 9, 10, 16 23 | 24 | properties: 25 | in: HIN, SD, LIN 26 | out: HO, LO 27 | power: VDD, VB, VS, VCC 28 | ground: VSS, COM 29 | nc: NC 30 | 31 | schematic: 32 | symbol: IC 33 | left: CONTROL, NC 34 | right: HISIDE, LOSIDE 35 | 36 | housing: 37 | outline: JEDEC MS-013 AA 38 | -------------------------------------------------------------------------------- /irf/irf4905s.yaml: -------------------------------------------------------------------------------- 1 | name: IRF4905S 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irf4905s.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 4 9 | S: 3 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: p, diode 18 | 19 | housing: 20 | pattern: PAK 21 | bodyWidth: 8.68 22 | bodyLength: 10.29-10.54 23 | height: 4.2-4.69 24 | leadWidth: 0.69-0.93 25 | leadLength: 1.14-1.39 26 | leadSpan: 14.73-15.49 27 | leadCount: 3 28 | pitch: 2.54 29 | tabWidth: 10.29-10.54 30 | tabLength: 7.58-7.87 31 | tabLedge: 1.4 32 | 33 | padWidth1: 3.81 34 | padHeight1: 2.08 35 | padWidth2: 8.89 36 | padHeight2: 11.43 37 | padSpan: 17.78 38 | -------------------------------------------------------------------------------- /irf/irf7313.yaml: -------------------------------------------------------------------------------- 1 | name: IRF7313 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.infineon.com/dgdl/irf7313pbf.pdf?fileId=5546d462533600a4015355f560f81b26 4 | keywords: FET 5 | 6 | pinout: 7 | G1: 2 8 | D1: 7, 8 9 | S1: 1 10 | 11 | G2: 4 12 | D2: 5, 6 13 | S2: 3 14 | 15 | properties: 16 | in: G1-2 17 | passive: S1-2, D1-2 18 | 19 | parts: 20 | FET1: G1, D1, S1 21 | FET2: G2, D2, S2 22 | 23 | schematic: 24 | symbol: FET 25 | options: n, diode 26 | 27 | housing: 28 | outline: JEDEC MS-012 AA 29 | 30 | padWidth: 1.78 31 | padHeight: 0.72 32 | padSpan: 6.46 33 | -------------------------------------------------------------------------------- /irf/irfl014n.yaml: -------------------------------------------------------------------------------- 1 | name: IRFL014N 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irfl014n.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 2, 4 9 | S: 3 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: n, diode 18 | 19 | housing: 20 | outline: JEDEC TO-261 AA 21 | 22 | padWidth1: 2 23 | padHeight1: 1.5 24 | padWidth2: 2 25 | padHeight2: 3.8 26 | padDistance: 6.3 27 | -------------------------------------------------------------------------------- /irf/irfs4115.yaml: -------------------------------------------------------------------------------- 1 | name: IRFS4115 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irfs4115pbf.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 4 9 | S: 3 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: n, diode 18 | 19 | housing: 20 | outline: JEDEC TO-263 AB 21 | -------------------------------------------------------------------------------- /irf/irfs4310.yaml: -------------------------------------------------------------------------------- 1 | name: IRFS4310 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irfs4310.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 4 9 | S: 3 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: n, diode 18 | 19 | housing: 20 | outline: JEDEC TO-263 AB 21 | -------------------------------------------------------------------------------- /irf/irg4bh20k.yaml: -------------------------------------------------------------------------------- 1 | name: IRG4BH20K 2 | description: Short Circuit Rated UltraFast IGBT 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irg4bh20k-s.pdf 4 | keywords: Transistor, IGBT 5 | 6 | pinout: 7 | G: 1 8 | E: 3 9 | C: 4 10 | 11 | properties: 12 | in: G 13 | passive: C, E 14 | 15 | schematic: 16 | symbol: transistor 17 | options: IGBT 18 | 19 | housing: 20 | pattern: PAK 21 | suffix: -S 22 | bodyWidth: 8.68 23 | bodyLength: 10.29-10.54 24 | height: 4.2-4.69 25 | leadWidth: 0.69-0.93 26 | leadLength: 1.14-1.39 27 | leadSpan: 14.73-15.49 28 | leadCount: 3 29 | pitch: 2.54 30 | tabWidth: 10.29-10.54 31 | tabLength: 7.58-7.87 32 | tabLedge: 1.4 33 | 34 | padWidth1: 3.81 35 | padHeight1: 2.08 36 | padWidth2: 8.89 37 | padHeight2: 11.43 38 | padSpan: 17.78 39 | -------------------------------------------------------------------------------- /irf/irlml0060.yaml: -------------------------------------------------------------------------------- 1 | name: IRLML0060 2 | description: HEXFET Power MOSFET 3 | datasheet: http://www.irf.com/product-info/datasheets/data/irlml0060pbf.pdf 4 | keywords: FET 5 | 6 | pinout: 7 | G: 1 8 | D: 3 9 | S: 2 10 | 11 | properties: 12 | in: G 13 | passive: S, D 14 | 15 | schematic: 16 | symbol: FET 17 | options: n, diode 18 | 19 | housing: 20 | outline: JEDEC TO-236 AB 21 | 22 | padWidth: 0.972 23 | padHeight: 0.802 24 | padSpan: 2.742 25 | -------------------------------------------------------------------------------- /issi/README.md: -------------------------------------------------------------------------------- 1 | ISSI 2 | ==== 3 | 4 | * **Integrated Silicon Solution Inc.** 5 | * http://www.issi.com 6 | -------------------------------------------------------------------------------- /jst/README.md: -------------------------------------------------------------------------------- 1 | JST 2 | === 3 | 4 | * **J.S.T. Mfg. Co., Ltd.** 5 | * http://www.jst-mfg.com 6 | -------------------------------------------------------------------------------- /jst/b04b-pask-1.yaml: -------------------------------------------------------------------------------- 1 | base: B04B-PASK 2 | name: B04B-PASK-1 3 | 4 | housing: 5 | holeDiameter1: 1.2 6 | padDiameter1: 0 7 | padPosition1: -4.5, 2.15 8 | -------------------------------------------------------------------------------- /jst/b04b-pask.yaml: -------------------------------------------------------------------------------- 1 | name: B04B-PASK 2 | description: PA 4-pin 2.0mm Pitch Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC) Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-4 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 10 16 | bodyLength: 5.3 17 | height: 7.7 18 | 19 | holeDiameter: 0.8 20 | pitch: 2 21 | rowCount: 1 22 | columnCount: 4 23 | rowDY: 0.45 24 | -------------------------------------------------------------------------------- /jst/b06b-pask-1.yaml: -------------------------------------------------------------------------------- 1 | base: B06B-PASK 2 | name: B06B-PASK-1 3 | 4 | housing: 5 | holeDiameter1: 1.2 6 | padDiameter1: 0 7 | padPosition1: -6.5, 2.15 8 | -------------------------------------------------------------------------------- /jst/b06b-pask.yaml: -------------------------------------------------------------------------------- 1 | name: B06B-PASK 2 | description: PA 6-pin 2.0mm Pitch Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC) Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-6 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 14 16 | bodyLength: 5.3 17 | height: 7.7 18 | 19 | holeDiameter: 0.8 20 | pitch: 2 21 | rowCount: 1 22 | columnCount: 6 23 | rowDY: 0.45 24 | -------------------------------------------------------------------------------- /jst/b10b-padss-1f.yaml: -------------------------------------------------------------------------------- 1 | base: B10B-PADSS-F 2 | name: B10B-PADSS-1F 3 | 4 | housing: 5 | holeDiameter1: 1.1 6 | padDiameter1: 0 7 | padPosition1: 2.85, -5.3 8 | -------------------------------------------------------------------------------- /jst/b10b-padss-f.yaml: -------------------------------------------------------------------------------- 1 | name: B10B-PADSS-F 2 | description: PAD 10-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePAD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-10 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 9.5 16 | bodyLength: 12 17 | height: 10.2 18 | bodyColor: white 19 | 20 | holeDiameter: 0.8 21 | horizontalPitch: -2 22 | verticalPitch: 2 23 | rowCount: 5 24 | columnCount: 2 25 | columnDX: -0.65 26 | -------------------------------------------------------------------------------- /jst/b10b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | base: B10B-PUDSS 2 | name: B10B-PUDSS-1 3 | 4 | housing: 5 | holeDiameter1: 1.4 6 | padDiameter1: 0 7 | padPosition1: 3.65, 5.2 8 | -------------------------------------------------------------------------------- /jst/b10b-pudss.yaml: -------------------------------------------------------------------------------- 1 | name: B10B-PUDSS 2 | description: PUD 10-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-10 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.3 16 | bodyLength: 12 17 | height: 9.6 18 | bodyColor: white 19 | 20 | holeDiameter: 0.8 21 | horizontalPitch: -2 22 | verticalPitch: 2 23 | rowCount: 5 24 | columnCount: 2 25 | columnDX: -0.75 26 | -------------------------------------------------------------------------------- /jst/b12b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | base: B12B-PUDSS 2 | name: B12B-PUDSS-1 3 | 4 | housing: 5 | holeDiameter1: 1.4 6 | padDiameter1: 0 7 | padPosition1: 3.65, 6.2 8 | -------------------------------------------------------------------------------- /jst/b12b-pudss.yaml: -------------------------------------------------------------------------------- 1 | name: B12B-PUDSS 2 | description: PUD 12-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-12 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.3 16 | bodyLength: 14 17 | height: 9.6 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 6 23 | columnCount: 2 24 | columnDX: -0.75 25 | -------------------------------------------------------------------------------- /jst/b30b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | base: B30B-PUDSS 2 | name: B30B-PUDSS-1 3 | 4 | housing: 5 | holeDiameter1: 1.4 6 | padDiameter1: 0 7 | padPosition1: 3.65, 15.2 8 | -------------------------------------------------------------------------------- /jst/b30b-pudss.yaml: -------------------------------------------------------------------------------- 1 | name: B30B-PUDSS 2 | description: PUD 30-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-30 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.3 16 | bodyLength: 32 17 | height: 9.6 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 15 23 | columnCount: 2 24 | columnDX: -0.75 25 | -------------------------------------------------------------------------------- /jst/b8b-ph-k-s.yaml: -------------------------------------------------------------------------------- 1 | name: B8B-PH-K-S 2 | description: PH 8-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePH.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-8 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 4.5 16 | bodyLength: 17.9 17 | height: 6 18 | 19 | holeDiameter: 0.8 20 | pitch: 2 21 | rowCount: 8 22 | columnCount: 1 23 | columnDX: -0.55 24 | -------------------------------------------------------------------------------- /jst/bm04b-pass-1.yaml: -------------------------------------------------------------------------------- 1 | base: BM04B-PASS 2 | name: BM04B-PASS-1 3 | 4 | housing: 5 | holeDiameter3: 1.8 6 | padDiameter3: 0 7 | padPosition3: -5.2, -2.05 8 | 9 | holeDiameter4: 0.8 10 | padDiameter4: 0 11 | padPosition4: 5.2, -2.05 12 | -------------------------------------------------------------------------------- /jst/bm04b-pass.yaml: -------------------------------------------------------------------------------- 1 | name: BM04B-PASS 2 | description: PA 4-pin 2.0mm Pitch Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC) Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-4 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 12 16 | bodyLength: 5.7 17 | height: 8.9 18 | 19 | padWidth1: 1 20 | padHeight1: 2.9 21 | pitch1: 2 22 | rowCount1: 1 23 | columnCount1: 4 24 | rowDY1: -3.3 25 | 26 | padWidth2: 1.8 27 | padHeight2: 3.6 28 | pitch2: 10.7 29 | rowCount2: 1 30 | columnCount2: 2 31 | rowDY2: 1.35 32 | -------------------------------------------------------------------------------- /jst/s04b-pask-2.yaml: -------------------------------------------------------------------------------- 1 | name: S04B-PASK-2 2 | description: PA 4-pin 2.0mm Pitch Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC) Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-4 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 10 16 | bodyLength: 11.7 17 | height: 6.5 18 | 19 | holeDiameter: 0.8 20 | pitch: 2 21 | rowCount: 1 22 | columnCount: 4 23 | rowDY: -2.35 24 | 25 | holeDiameter1: 1.2 26 | padDiameter1: 0 27 | padPosition1: -4.5, -0.25, 4.5, -0.25 28 | -------------------------------------------------------------------------------- /jst/s06b-pask-2.yaml: -------------------------------------------------------------------------------- 1 | name: S06B-PASK-2 2 | description: PA 6-pin 2.0mm Pitch Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC) Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-6 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 14 16 | bodyLength: 11.7 17 | height: 6.5 18 | 19 | holeDiameter: 0.8 20 | pitch: 2 21 | rowCount: 1 22 | columnCount: 6 23 | rowDY: -2.35 24 | 25 | holeDiameter1: 1.2 26 | padDiameter1: 0 27 | padPosition1: -6.5, -0.25, 6.5, -0.25 28 | -------------------------------------------------------------------------------- /jst/s08b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | name: S08B-PUDSS-1 2 | description: PUD 8-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-8 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 12.7 16 | bodyLength: 10 17 | height: 8.5 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 4 23 | columnCount: 2 24 | columnDX: 4.75 25 | 26 | holeDiameter1: 1.7 27 | padDiameter1: 0 28 | padPosition1: -3.95, -3.9, -3.95, 3.9 29 | -------------------------------------------------------------------------------- /jst/s10b-padss-1.yaml: -------------------------------------------------------------------------------- 1 | name: S10B-PADSS-1 2 | description: PAD 10-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePAD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-10 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 13.2 16 | bodyLength: 12 17 | height: 10.5 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 5 23 | columnCount: 2 24 | columnDX: 5.1 25 | 26 | holeDiameter1: 1.2 27 | padDiameter1: 0 28 | padPosition1: 2.7, -5.6, 2.7, 5.6 29 | -------------------------------------------------------------------------------- /jst/s12b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | name: S12B-PUDSS-1 2 | description: PUD 12-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-12 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 12.7 16 | bodyLength: 14 17 | height: 8.5 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 6 23 | columnCount: 2 24 | columnDX: 4.75 25 | 26 | holeDiameter1: 1.7 27 | padDiameter1: 0 28 | padPosition1: -3.95, -5.9, -3.95, 5.9 29 | -------------------------------------------------------------------------------- /jst/s30b-pudss-1.yaml: -------------------------------------------------------------------------------- 1 | name: S30B-PUDSS-1 2 | description: PUD 30-pin 2.0mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-30 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 12.7 16 | bodyLength: 32 17 | height: 8.5 18 | 19 | holeDiameter: 0.8 20 | horizontalPitch: -2 21 | verticalPitch: 2 22 | rowCount: 15 23 | columnCount: 2 24 | columnDX: 4.75 25 | 26 | holeDiameter1: 1.7 27 | padDiameter1: 0 28 | padPosition1: -3.95, -14.9, -3.95, 14.9 29 | -------------------------------------------------------------------------------- /jst/sm03b-ghs-tb.yaml: -------------------------------------------------------------------------------- 1 | name: SM03B-GHS-TB 2 | description: GH 3-pin 1.25 mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/eGH.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-5 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-3 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 7 17 | bodyLength: 4.05 18 | height: 4.25 19 | 20 | padWidth1: 0.6 21 | padHeight1: 1.7 22 | rowCount1: 1 23 | columnCount1: 3 24 | rowDY1: -2.275 25 | pitch1: 1.25 26 | 27 | padWidth2: 1 28 | padHeight2: 2.7 29 | padPosition2: -3.1, 0.925, 3.1, 0.925 30 | -------------------------------------------------------------------------------- /jst/sm07b-ghs-tb.yaml: -------------------------------------------------------------------------------- 1 | name: SM07B-GHS-TB 2 | description: GH 7-pin 1.25 mm Pitch Disconnectable Crimp Style Connector 3 | datasheet: http://www.jst-mfg.com/product/pdf/eng/eGH.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-9 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | right: 1-7 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 12 17 | bodyLength: 4.05 18 | height: 4.25 19 | 20 | padWidth1: 0.6 21 | padHeight1: 1.7 22 | rowCount1: 1 23 | columnCount1: 7 24 | rowDY1: -2.275 25 | pitch1: 1.25 26 | 27 | padWidth2: 1 28 | padHeight2: 2.7 29 | padPosition2: -5.6, 0.925, 5.6, 0.925 30 | -------------------------------------------------------------------------------- /keystone/8195.yaml: -------------------------------------------------------------------------------- 1 | name: 8195 2 | suffix: -2, -3, -4, -5, -6, -7, -SEMS 3 | description: Low-Profile PC Screw Terminal 4 | datasheet: http://www.keyelco.com/product-pdf.cfm?p=1525 5 | keywords: Connector, Terminal 6 | 7 | pinout: 1-5 8 | 9 | schematic: 10 | symbol: connector 11 | left: 1, 3 12 | right: 2, 4 13 | bottom: 5 14 | 15 | housing: 16 | pattern: custom 17 | bodyWidth: 7.87 18 | bodyLength: 7.87 19 | height: 3.4 20 | bodyColor: silver 21 | 22 | holeDiameter: 1.7 23 | horizontalPitch: 4.75 24 | verticalPitch: 7 25 | columnCount: 2 26 | rowCount: 2 27 | 28 | holeDiameter1: 3.66 29 | padPosition1: 0, 0 30 | -------------------------------------------------------------------------------- /keystone/README.md: -------------------------------------------------------------------------------- 1 | KEYSTONE 2 | ======== 3 | 4 | * **Keystone Electronics Corp.** 5 | * http://keyelco.com 6 | -------------------------------------------------------------------------------- /kingbright/README.md: -------------------------------------------------------------------------------- 1 | KINGBRIGHT 2 | ========== 3 | 4 | * **Kingbright Electronic Co, Ltd** 5 | * http://www.kingbright.com 6 | -------------------------------------------------------------------------------- /kingbright/kpa-3010.yaml: -------------------------------------------------------------------------------- 1 | name: KPA-3010 2 | description: 3.0mmx1.0mm Right Angle SMD Chip LED Lamp 3 | keywords: LED 4 | 5 | schematic: 6 | symbol: LED 7 | 8 | housing: 9 | pattern: custom 10 | options: polarized 11 | bodyWidth: 1 12 | bodyLength: 3 13 | height: 1 14 | 15 | padWidth: 1.5 16 | padHeight: 1.5 17 | padPosition: 0, -1.75, 0, 1.75 18 | 19 | padWidth1: 0.9 20 | padHeight1: 0.9 21 | padPosition1: -0.65, 0 22 | 23 | silkscreen: M 1 -1 1.5 -1 1.5 1 1 1 24 | -------------------------------------------------------------------------------- /kingbright/kpa-3010cgck.yaml: -------------------------------------------------------------------------------- 1 | base: KPA-3010 2 | name: KPA-3010CGCK 3 | description: 3.0mmx1.0mm Right Angle SMD Chip LED Lamp, Green 4 | datasheet: http://www.kingbright.com/attachments/file/psearch/000/00/00/KPA-3010CGCK(Ver.20B).pdf 5 | -------------------------------------------------------------------------------- /kingbright/kpa-3010ec.yaml: -------------------------------------------------------------------------------- 1 | base: KPA-3010 2 | name: KPA-3010EC 3 | description: 3.0mmx1.0mm Right Angle SMD Chip LED Lamp, High Efficiency Red 4 | datasheet: http://www.kingbright.com/attachments/file/psearch/000/00/00/KPA-3010EC(Ver.20A).pdf 5 | -------------------------------------------------------------------------------- /kingbright/kpa-3010qbc-d.yaml: -------------------------------------------------------------------------------- 1 | base: KPA-3010 2 | name: KPA-3010QBC-D 3 | description: 3.0mmx1.0mm Right Angle SMD Chip LED Lamp, Blue 4 | datasheet: http://www.kingbright.com/attachments/file/psearch/000/00/00/KPA-3010QBC-D(Ver.17B).pdf 5 | -------------------------------------------------------------------------------- /kyocera/145602.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: 0.4 mm Pitch 5602 Series SMT Vertical Plug 3 | datasheet: http://www.kyocera-connector.com/en/wp-content/uploads/2015/12/5602.pdf 4 | keywords: Connector, Male 5 | 6 | schematic: 7 | symbol: connector 8 | options: ccw, square-pin 9 | -------------------------------------------------------------------------------- /kyocera/145602070001829s+.yaml: -------------------------------------------------------------------------------- 1 | base: '145602' 2 | name: 145602070001829S+ 3 | 4 | pinout: 1-70 5 | 6 | housing: 7 | pattern: custom 8 | options: polarized 9 | bodyWidth: 2.66 10 | bodyLength: 15.1 11 | height: 1.2 12 | 13 | padWidth1: 0.7 14 | padHeight1: 0.23 15 | rowCount1: 35 16 | columnCount1: 1 17 | columnDX1: -1.83 18 | pitch1: 0.4 19 | 20 | padWidth2: 0.7 21 | padHeight2: 0.23 22 | rowCount2: 35 23 | columnCount2: 1 24 | columnDX2: 1.83 25 | pitch2: -0.4 26 | 27 | holeDiameter3: 0.65 28 | padDiameter3: 0 29 | padPosition3: -0.6, -7.25, 0.6, 7.25 30 | -------------------------------------------------------------------------------- /kyocera/245602.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: 0.4 mm Pitch 5602 Series SMT Vertical Receptacle 3 | datasheet: http://www.kyocera-connector.com/en/wp-content/uploads/2015/12/5602.pdf 4 | keywords: Connector, Female 5 | 6 | schematic: 7 | symbol: connector 8 | options: ccw, square-pin 9 | -------------------------------------------------------------------------------- /kyocera/245602670001829h+.yaml: -------------------------------------------------------------------------------- 1 | base: '245602' 2 | name: 245602670001829H+ 3 | 4 | pinout: 1-70 5 | 6 | housing: 7 | pattern: custom 8 | options: polarized 9 | bodyWidth: 4 10 | bodyLength: 16.1 11 | height: 1.45 12 | 13 | padWidth1: 1 14 | padHeight1: 0.23 15 | rowCount1: 35 16 | columnCount1: 1 17 | columnDX1: 2.25 18 | pitch1: 0.4 19 | 20 | padWidth2: 1 21 | padHeight2: 0.23 22 | rowCount2: 35 23 | columnCount2: 1 24 | columnDX2: -2.25 25 | pitch2: -0.4 26 | 27 | holeDiameter3: 0.65 28 | padDiameter3: 0 29 | padPosition3: -0.9, -7.6, 0.6, 7.6 30 | -------------------------------------------------------------------------------- /kyocera/README.md: -------------------------------------------------------------------------------- 1 | KYOCERA 2 | ======= 3 | 4 | * **Kyocera** 5 | * http://global.kyocera.com 6 | -------------------------------------------------------------------------------- /ledguhon/jh-9rgb14g45.yaml: -------------------------------------------------------------------------------- 1 | name: JH-9RGB14G45 2 | description: High Power RGB LED, 9W 3 | datasheet: http://www.ledguhon.com/u_file/images/14_12_24/50132e30fb.pdf 4 | keywords: IC, LED 5 | 6 | pinout: 7 | ANODE: 8 | R+: 1 9 | G+: 2 10 | B+: 3 11 | CATHODE: 12 | R-: 6 13 | G-: 5 14 | B-: 4 15 | PAD: 7 16 | 17 | properties: 18 | passive: ANODE, CATHODE 19 | 20 | schematic: 21 | symbol: IC 22 | left: ANODE 23 | right: CATHODE 24 | bottom: PAD 25 | 26 | housing: 27 | pattern: SOP 28 | bodyWidth: 7.2 29 | bodyLength: 8 30 | height: 5.2 31 | leadSpan: 14.4 32 | leadWidth: 1 33 | leadLength: 2 34 | pitch: 1.7 35 | tabWidth: 5.9 36 | tabLength: 5.9 37 | leadCount: 6 38 | -------------------------------------------------------------------------------- /linear/README.md: -------------------------------------------------------------------------------- 1 | LINEAR 2 | ====== 3 | 4 | * **Linear Technology Corp.** 5 | * http://www.linear.com 6 | -------------------------------------------------------------------------------- /linear/lt1611.yaml: -------------------------------------------------------------------------------- 1 | name: LT1611CS5 2 | descrition: Inverting 1.4MHz Switching Regulator 3 | datasheet: http://cds.linear.com/docs/en/datasheet/1611f.pdf 4 | keywords: IC, Analog, Regulator, DC-DC 5 | 6 | pinout: 7 | VIN: 5 8 | SW: 1 9 | NFB: 3 10 | ~SHDN: 4 11 | GND: 2 12 | 13 | properties: 14 | in: VIN, ~SHDN 15 | power: VIN 16 | ground: GND 17 | passive: SW, NFB 18 | inverted: ~SHDN 19 | 20 | schematic: 21 | symbol: IC 22 | left: VIN, ~SHDN 23 | right: SW, NFB 24 | bottom: GND 25 | 26 | housing: 27 | outline: JEITA SC-74A 28 | -------------------------------------------------------------------------------- /macroblock/mbi6651.yaml: -------------------------------------------------------------------------------- 1 | name: MBI6651 2 | description: Step-Down, 1A LED Driver 3 | datasheet: http://www.mblock.com.tw/downfile.php?Code=854d9fca60b4bd07f9bb215d59ef5561 4 | keywords: IC, Analog, Driver 5 | 6 | pinout: 7 | SW: 1 8 | GND: 2 9 | DIM: 3 10 | SEN: 4 11 | NC: 5 12 | VIN: 6 13 | 14 | properties: 15 | in: DIM 16 | out: SW 17 | passive: SEN 18 | power: VIN 19 | ground: GND 20 | nc: NC 21 | 22 | schematic: 23 | symbol: IC 24 | left: DIM, NC 25 | right: SEN, SW 26 | top: VIN 27 | bottom: GND 28 | 29 | housing: 30 | suffix: GST 31 | outline: JEDEC MO-178 AB 32 | -------------------------------------------------------------------------------- /maxim/README.md: -------------------------------------------------------------------------------- 1 | MAXIM 2 | ===== 3 | 4 | * **Maxim Integrated** 5 | * https://www.maximintegrated.com 6 | -------------------------------------------------------------------------------- /maxim/max14626.yaml: -------------------------------------------------------------------------------- 1 | name: MAX14626 2 | description: High-Voltage Reverse-Input-Capable 4-20mA Current Loop Protector 3 | datasheet: http://datasheets.maximintegrated.com/en/ds/MAX14626.pdf 4 | keywords: IC, Analog, Protector 5 | 6 | pinout: 7 | IN: 1 8 | OUT: 6 9 | GND: 5 10 | EP: 7 11 | IC: 2, 3, 4 12 | 13 | properties: 14 | in: IN 15 | out: OUT 16 | ground: GND, IC, EP 17 | 18 | schematic: 19 | symbol: IC 20 | left: IN, IC 21 | right: OUT 22 | bottom: EP, GND 23 | 24 | housing: 25 | outline: JEDEC MO-229 W3030A-2 26 | tabWidth: 1.4-1.6 27 | tabLength: 2.2-2.4 28 | 29 | padWidth: 0.71 30 | padHeight: 0.46 31 | padDistance: 3 32 | -------------------------------------------------------------------------------- /maxim/max1735.yaml: -------------------------------------------------------------------------------- 1 | name: MAX1735 2 | suffix: EUK50-T, EUK30-T, EUK25-T 3 | description: 200mA, Negative-Output, Low-Dropout Linear Regulator 4 | datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1735.pdf 5 | keywords: IC, Analog, LDO 6 | 7 | pinout: 8 | GND: 1 9 | IN: 2 10 | ~SHDN: 3 11 | SET: 4 12 | OUT: 5 13 | 14 | properties: 15 | in: IN, ~SHDN, SET 16 | out: OUT 17 | ground: GND 18 | inverted: ~SHDN 19 | 20 | schematic: 21 | symbol: IC 22 | left: IN, ~SHDN 23 | right: OUT, SET 24 | bottom: GND 25 | 26 | housing: 27 | outline: JEDEC MO-178 AA 28 | -------------------------------------------------------------------------------- /maxim/max6070.yaml: -------------------------------------------------------------------------------- 1 | base: MAX607x 2 | name: MAX6070AUT 3 | alias: MAX6070BUT 4 | 5 | pinout: 6 | IN: 4 7 | EN: 3 8 | FILTER: 1 9 | OUTF: 6 10 | OUTS: 5 11 | GND: 2 12 | -------------------------------------------------------------------------------- /maxim/max6071.yaml: -------------------------------------------------------------------------------- 1 | base: MAX607x 2 | name: MAX6071AAUT 3 | alias: MAX6071BAUT 4 | 5 | pinout: 6 | IN: 4 7 | EN: 3 8 | OUTF: 6 9 | GNDF: 1 10 | OUTS: 5 11 | GNDS: 2 12 | -------------------------------------------------------------------------------- /maxim/max607x.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | suffix: 12+T, 12/V+T, 18+T, 21+T, 25+T, 25/V+T, 30+T, 33+T, 41+T, 41/V+T, 50+T, 50/V+T 3 | description: Low-Noise, High-Precision Series Voltage Reference 4 | datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6070-MAX6071.pdf 5 | keywords: IC, Analog, Reference 6 | 7 | properties: 8 | in: IN, EN 9 | out: OUTF 10 | passive: OUTS, GNDS, FILTER 11 | power: IN, OUTF 12 | ground: GND, GNDF 13 | 14 | schematic: 15 | symbol: IC 16 | left: IN, EN, FILTER 17 | right: OUTF, OUTS, GNDS 18 | bottom: GND, GNDF 19 | 20 | housing: 21 | outline: JEDEC MO-178 AB 22 | 23 | padWidth: 1.33 24 | padHeight: 0.56 25 | padDistance: 2.4 26 | -------------------------------------------------------------------------------- /maxim/max6421.yaml: -------------------------------------------------------------------------------- 1 | name: MAX6421 2 | description: Low-Power Reset Circuit 3 | datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6340-MAX6426.pdf 4 | keywords: IC, Digital, Reset 5 | 6 | pinout: 7 | GND: 1 8 | Vcc: 2 9 | SRT: 3 10 | RESET: 4 11 | 12 | properties: 13 | out: RESET 14 | passive: SRT 15 | power: Vcc 16 | ground: GND 17 | 18 | schematic: 19 | symbol: IC 20 | left: SRT 21 | right: RESET 22 | top: Vcc 23 | bottom: GND 24 | 25 | housing: 26 | outline: JEDEC TO-253 27 | 28 | padWidth1: 1.31 29 | padHeight1: 0.55 30 | padWidth2: 1.31 31 | padHeight2: 0.94 32 | padDistance: 2 33 | -------------------------------------------------------------------------------- /maxim/max765.yaml: -------------------------------------------------------------------------------- 1 | base: MAX764 2 | name: MAX765C 3 | alias: MAX765E 4 | -------------------------------------------------------------------------------- /maxim/max766.yaml: -------------------------------------------------------------------------------- 1 | base: MAX764 2 | name: MAX766C 3 | alias: MAX766E 4 | -------------------------------------------------------------------------------- /maxim/max9924.yaml: -------------------------------------------------------------------------------- 1 | name: MAX9924UAUB+ 2 | alias: MAX9924UAUB/V+ 3 | description: Variable Reluctance Sensor Interfaces with Differential Input and Adaptive Peak Threshold 4 | datasheet: https://datasheets.maximintegrated.com/en/ds/MAX9924-MAX9927.pdf 5 | keywords: IC, Analog, Comparator 6 | 7 | pinout: 8 | INPUT: 9 | IN-: 2 10 | IN+: 1 11 | COUT: 7 12 | ZERO_EN: 6 13 | INT_THRS: 9 14 | EXT: 8 15 | BIAS: 4 16 | NC: 3 17 | 18 | VCC: 10 19 | GND: 5 20 | 21 | properties: 22 | in: IN+, IN-, ZERO_EN, INT_THRS, EXT 23 | out: COUT 24 | passive: BIAS 25 | power: VCC 26 | ground: GND 27 | nc: NC 28 | inverted: IN- 29 | 30 | schematic: 31 | symbol: IC 32 | left: INPUT, BIAS, ZERO_EN 33 | right: COUT, EXT, INT_THRS, NC 34 | top: VCC 35 | bottom: GND 36 | 37 | housing: 38 | outline: JEDEC MO-187 BA 39 | 40 | padWidth: 1.4 41 | padHeight: 0.28 42 | padDistance: 4.28 43 | -------------------------------------------------------------------------------- /maxim/max9925.yaml: -------------------------------------------------------------------------------- 1 | name: MAX9925AUB+ 2 | description: Variable Reluctance Sensor Interfaces with Differential Input and Adaptive Peak Threshold 3 | datasheet: https://datasheets.maximintegrated.com/en/ds/MAX9924-MAX9927.pdf 4 | keywords: IC, Analog, Comparator 5 | 6 | pinout: 7 | INPUT: 8 | IN-: 2 9 | IN+: 1 10 | OUTPUT: 11 | OUT: 3 12 | COUT: 7 13 | ZERO_EN: 6 14 | INT_THRS: 9 15 | EXT: 8 16 | BIAS: 4 17 | 18 | VCC: 10 19 | GND: 5 20 | 21 | properties: 22 | in: IN+, IN-, ZERO_EN, INT_THRS, EXT 23 | out: OUT, COUT 24 | passive: BIAS 25 | power: VCC 26 | ground: GND 27 | inverted: IN- 28 | 29 | schematic: 30 | symbol: IC 31 | left: INPUT, BIAS, ZERO_EN 32 | right: OUTPUT, EXT, INT_THRS, NC 33 | top: VCC 34 | bottom: GND 35 | 36 | housing: 37 | outline: JEDEC MO-187 BA 38 | 39 | padWidth: 1.4 40 | padHeight: 0.28 41 | padDistance: 4.28 42 | -------------------------------------------------------------------------------- /mecxtal/ssg-32.768k-12.5p.yaml: -------------------------------------------------------------------------------- 1 | name: SSG-32.768K-12.5P 2 | description: “SSG” series 32.768 KHz Surface Mount Crystal 3 | datasheet: http://www.mecxtal.com/pdf/x_ssg-32.768k.pdf 4 | keywords: Crystal 5 | 6 | pinout: 7 | X1: 1 8 | X2: 4 9 | NC: 2, 3 10 | 11 | properties: 12 | passive: X1-2 13 | nc: NC 14 | 15 | schematic: 16 | symbol: crystal 17 | left: X1 18 | right: X2 19 | 20 | housing: 21 | pattern: SOJ 22 | bodyWidth: 3.2 23 | bodyLength: 8 24 | height: 2.5 25 | leadWidth: 0.5 26 | leadLength: 0.9 27 | leadSpan: 3.8 28 | leadCount: 4 29 | pitch: 5.5 30 | 31 | padWidth: 1.9 32 | padHeight: 1.3 33 | padSpace: 1.3 34 | -------------------------------------------------------------------------------- /micrel/README.md: -------------------------------------------------------------------------------- 1 | MICREL 2 | ======= 3 | 4 | * **Micrel, Incorporated** (aquired by **Microchip Technology Incorporated**) 5 | * http://micrel.com 6 | -------------------------------------------------------------------------------- /microchip/README.md: -------------------------------------------------------------------------------- 1 | MICROCHIP 2 | ========= 3 | 4 | * **Microchip Technology Incorporated** 5 | * http://www.microchip.com 6 | -------------------------------------------------------------------------------- /misc/mh-2.3-5.yaml: -------------------------------------------------------------------------------- 1 | name: MH-2.3-5 2 | description: Mounting Hole, 2.3 mm hole diameter, 5 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 2.3 11 | padDiameter: 5 12 | viaDiameter: 0.5 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-2.9-4.yaml: -------------------------------------------------------------------------------- 1 | name: MH-2.9-4 2 | description: Mounting Hole, 2.9 mm hole diameter, 4 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 2.9 11 | padDiameter: 4 12 | -------------------------------------------------------------------------------- /misc/mh-2.9-7.yaml: -------------------------------------------------------------------------------- 1 | name: MH-2.9-7 2 | description: Mounting Hole, 2.9 mm hole diameter, 7 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 2.9 11 | padDiameter: 7 12 | viaDiameter: 0.8 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-3-10x6.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3-10x6 2 | description: Mounting Hole, 3 mm hole diameter, 10x6 mm pad 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3 11 | padWidth: 6 12 | padHeight: 10 13 | viaDiameter: 0.6 14 | viaCount: 10 15 | -------------------------------------------------------------------------------- /misc/mh-3.2-5.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.2-5 2 | description: Mounting Hole, 3.2 mm hole diameter, 5 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.2 11 | padDiameter: 5 12 | -------------------------------------------------------------------------------- /misc/mh-3.2-7.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.2-7 2 | description: Mounting Hole, 3.2 mm hole diameter, 7 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.2 11 | padDiameter: 7 12 | viaDiameter: 0.8 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-3.4-4.4.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.4-4.4 2 | description: Mounting Hole, 3.4 mm hole diameter, 4.4 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.4 11 | padDiameter: 4.4 12 | -------------------------------------------------------------------------------- /misc/mh-3.4-8.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.4-8 2 | description: Mounting Hole, 3.4 mm hole diameter, 8 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.4 11 | padDiameter: 8 12 | viaDiameter: 0.8 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-3.5-10x6.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.5-10x6 2 | description: Mounting Hole, 3.5 mm hole diameter, 10x6 mm pad 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.5 11 | padWidth: 6 12 | padHeight: 10 13 | viaDiameter: 0.6 14 | viaCount: 10 15 | -------------------------------------------------------------------------------- /misc/mh-3.5-8x6.yaml: -------------------------------------------------------------------------------- 1 | name: MH-3.5-8x6 2 | description: Mounting Hole, 3.5 mm hole diameter, 8x6 mm pad 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 3.5 11 | padWidth: 6 12 | padHeight: 8 13 | viaDiameter: 0.6 14 | viaCount: 10 15 | -------------------------------------------------------------------------------- /misc/mh-4-8.yaml: -------------------------------------------------------------------------------- 1 | name: MH-4-8 2 | description: Mounting Hole, 4 mm hole diameter, 8 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 4 11 | padDiameter: 8 12 | viaDiameter: 0.8 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-5-10.yaml: -------------------------------------------------------------------------------- 1 | name: MH-5-10 2 | description: Mounting Hole, 5 mm hole diameter, 10 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 5 11 | padDiameter: 10 12 | viaDiameter: 0.8 13 | viaCount: 10 14 | -------------------------------------------------------------------------------- /misc/mh-5-7.5.yaml: -------------------------------------------------------------------------------- 1 | name: MH-5-7.5 2 | description: Mounting Hole, 5 mm hole diameter, 7.5 mm pad diameter 3 | keywords: Mounting hole 4 | 5 | schematic: 6 | symbol: mounting-hole 7 | 8 | housing: 9 | pattern: mounting-hole 10 | holeDiameter: 5 11 | padDiameter: 7.5 12 | 13 | -------------------------------------------------------------------------------- /misc/tp-sm-1.yaml: -------------------------------------------------------------------------------- 1 | name: TP-SM-1 2 | description: Surface Mount Test Point, 1 mm diameter 3 | keywords: Test point 4 | 5 | schematic: 6 | symbol: test-point 7 | 8 | housing: 9 | pattern: test-point 10 | padDiameter: 1 11 | -------------------------------------------------------------------------------- /misc/tp-th-1.yaml: -------------------------------------------------------------------------------- 1 | name: TP-TH-1 2 | description: Through-hole Test Point, 1 mm diameter hole 3 | keywords: Test point 4 | 5 | schematic: 6 | symbol: test-point 7 | 8 | housing: 9 | pattern: test-point 10 | holeDiameter: 1 11 | -------------------------------------------------------------------------------- /misc/tp-th-5.yaml: -------------------------------------------------------------------------------- 1 | name: TP-TH-5 2 | description: Through-hole Test Point, 5 mm diameter hole 3 | keywords: Test point 4 | 5 | schematic: 6 | symbol: test-point 7 | 8 | housing: 9 | pattern: test-point 10 | holeDiameter: 5 11 | -------------------------------------------------------------------------------- /misc/tph-2.5-sm-q2.5.yaml: -------------------------------------------------------------------------------- 1 | name: TPH-2.5-SM-Q2.5 2 | description: 2.5 mm Diameter Hole with Surface Mount Test Point, Square 2.5x2.5 mm 3 | keywords: Test point 4 | 5 | pinout: 6 | PAD: 1 7 | 8 | schematic: 9 | symbol: test-point 10 | 11 | housing: 12 | pattern: custom 13 | bodyWidth: 3 14 | bodyLength: 8 15 | height: 0 16 | 17 | padWidth1: 2.5 18 | padHeight1: 2.5 19 | padPosition1: 0, -2.5 20 | 21 | holeDiameter2: 2.5 22 | padDiameter2: 0 23 | padPosition2: 0, 2.5 24 | -------------------------------------------------------------------------------- /misc/tph-3.5-sm-q3.5.yaml: -------------------------------------------------------------------------------- 1 | name: TPH-3.5-SM-Q3.5 2 | description: 3.5 mm Diameter Hole with Surface Mount Test Point, Square 3.5x3.5 mm 3 | keywords: Test point 4 | 5 | pinout: 6 | PAD: 1 7 | 8 | schematic: 9 | symbol: test-point 10 | 11 | housing: 12 | pattern: custom 13 | bodyWidth: 4 14 | bodyLength: 10 15 | height: 0 16 | 17 | padWidth1: 3.5 18 | padHeight1: 3.5 19 | padPosition1: 0, -3 20 | 21 | holeDiameter2: 3.5 22 | padDiameter2: 0 23 | padPosition2: 0, 3 24 | -------------------------------------------------------------------------------- /module/esp-07.yaml: -------------------------------------------------------------------------------- 1 | name: ESP-07 2 | description: ESP8266EX Based Wi-Fi Module 3 | keywords: IC, Digital, Converter 4 | 5 | pinout: 6 | RST: 1 7 | ADC: 2 8 | CH_PD: 3 9 | GPIO: 10 | GPIO0: 12 11 | GPIO2: 11 12 | GPIO4: 13 13 | GPIO5: 14 14 | GPIO12-16: 6, 7, 5, 10, 4 15 | UART: 16 | TXD0: 16 17 | RXD0: 15 18 | 19 | VCC: 8 20 | GND: 9 21 | 22 | properties: 23 | in: RST, CH_PD, RXD0, ADC 24 | out: TXD0 25 | bidir: GPIO0, GPIO2, GPIO4, GPIO5, GPIO12-16 26 | power: VCC 27 | ground: GND 28 | 29 | schematic: 30 | symbol: IC 31 | left: UART, RST, CH_PD, ADC 32 | right: GPIO 33 | top: VCC 34 | bottom: GND 35 | 36 | housing: 37 | pattern: SON 38 | bodyWidth: 16 39 | bodyLength: 21.2 40 | bodyPosition: 0, -2.1 41 | height: 3 42 | leadWidth: 1 43 | leadLength: 1.5 44 | leadCount: 16 45 | pitch: 2 46 | 47 | padWidth: 1.7 48 | padHeight: 0.9 49 | padDistance: 16 50 | -------------------------------------------------------------------------------- /module/led-driver-3w-700ma.yaml: -------------------------------------------------------------------------------- 1 | name: LED-Driver-3W-700mA 2 | description: LED Driver, 3 W, 400 mA, 7-30 V 3 | keywords: Module, Driver 4 | 5 | pinout: 6 | PWM: 5 7 | LED: 8 | LED+: 6 9 | LED-: 7 10 | 11 | VIN+: 1, 2 12 | VIN-: 3, 4 13 | 14 | properties: 15 | in: PWM 16 | out: LED+, LED- 17 | power: VIN+ 18 | ground: VIN- 19 | 20 | schematic: 21 | symbol: IC 22 | left: PWM 23 | right: LED 24 | top: VIN+ 25 | bottom: VIN- 26 | 27 | housing: 28 | pattern: custom 29 | options: polarized 30 | bodyWidth: 10 31 | bodyLength: 25 32 | height: 15 33 | 34 | holeDiameter: 1 35 | padDiameter: 1.4 36 | pitch: 2.54 37 | rowCount: 7 38 | columnCount: 1 39 | -------------------------------------------------------------------------------- /module/oled-ssd1306.yaml: -------------------------------------------------------------------------------- 1 | name: OLED-SSD1306 2 | description: 0.96 inch 128x64 OLED Display Module with I2C Interface 3 | keywords: Module, OLED, Display 4 | 5 | pinout: 6 | I2C: 7 | SCK: 3 8 | SDA: 4 9 | 10 | VDD: 2 11 | GND: 1 12 | 13 | properties: 14 | in: SCK 15 | bidir: SDA 16 | power: VDD 17 | ground: GND 18 | 19 | schematic: 20 | symbol: IC 21 | left: I2C 22 | top: VDD 23 | bottom: GND 24 | 25 | housing: 26 | pattern: custom 27 | options: polarized 28 | 29 | bodyWidth: 27.3 30 | bodyLength: 27.3 31 | height: 6 32 | 33 | holeDiameter: 1 34 | columnCount: 4 35 | rowCount: 1 36 | pitch: 2.54 37 | rowDY: -12.15 38 | leadCount: 4 39 | 40 | holeDiameter1: 3 41 | padDiameter1: 0 42 | columnCount1: 2 43 | rowCount1: 2 44 | pitch1: 23.3 45 | -------------------------------------------------------------------------------- /molex/39-28-1043.yaml: -------------------------------------------------------------------------------- 1 | name: 39-28-1043 2 | description: 4-pin Mini-Fit Vertical Header Assembly without Pegs 3 | datasheet: http://www.molex.com/pdm_docs/sd/039281043_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-4 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | left: 1-2 12 | right: 3-4 13 | 14 | housing: 15 | pattern: custom 16 | options: polarized 17 | bodyWidth: 9.2-10 18 | bodyLength: 9.4-9.8 19 | height: 12.5-13.1 20 | holeDiameter: 1.4 21 | horizontalPitch: 4.2 22 | verticalPitch: 5.5 23 | rowCount: 2 24 | columnCount: 2 25 | -------------------------------------------------------------------------------- /molex/39-28-1243.yaml: -------------------------------------------------------------------------------- 1 | name: 39-28-1243 2 | description: 24-pin Mini-Fit Vertical Header Assembly without Pegs 3 | datasheet: http://www.molex.com/pdm_docs/sd/039281243_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-24 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | left: 1-12 12 | right: 13-24 13 | 14 | housing: 15 | pattern: custom 16 | options: polarized 17 | bodyWidth: 51.2-52 18 | bodyLength: 9.4-9.8 19 | height: 12.5-13.1 20 | holeDiameter: 1.4 21 | horizontalPitch: 4.2 22 | verticalPitch: 5.5 23 | rowCount: 2 24 | columnCount: 12 25 | -------------------------------------------------------------------------------- /molex/70246-3404.yaml: -------------------------------------------------------------------------------- 1 | name: 70246-3404 2 | description: 2.54mm Pitch Header, Low Profile, Dual Row, Vertical, Shrouded, 34 Circuits 3 | datasheet: http://www.molex.com/pdm_docs/sd/702463404_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-34 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.89 16 | bodyLength: 50.8 17 | height: 9.27 18 | 19 | holeDiameter: 1.14 20 | rowCount: 17 21 | columnCount: 2 22 | pitch: 2.54 23 | -------------------------------------------------------------------------------- /molex/70246-4004.yaml: -------------------------------------------------------------------------------- 1 | name: 70246-4004 2 | description: 2.54mm Pitch Header, Low Profile, Dual Row, Vertical, Shrouded, 40 Circuits 3 | datasheet: http://www.molex.com/pdm_docs/sd/702463404_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-40 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 8.89 16 | bodyLength: 58.42 17 | height: 9.27 18 | 19 | holeDiameter: 1.14 20 | rowCount: 20 21 | columnCount: 2 22 | pitch: 2.54 23 | -------------------------------------------------------------------------------- /molex/90136-1202.yaml: -------------------------------------------------------------------------------- 1 | name: 90136-1202 2 | description: Header, Single Row, Vertical, Shrouded, 2 Circuits 3 | datasheet: http://www.molex.com/pdm_docs/sd/901361202_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-2 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 7.21 16 | bodyLength: 8.43 17 | height: 10.9 18 | 19 | holeDiameter: 1.1 20 | pitch: 2.54 21 | rowCount: 2 22 | columnCount: 1 23 | -------------------------------------------------------------------------------- /molex/90136-2103.yaml: -------------------------------------------------------------------------------- 1 | name: 90136-2103 2 | description: Header, Single Row, Right Angle, Shrouded, 3 Circuits 3 | datasheet: http://www.molex.com/pdm_docs/sd/901362103_sd.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-3 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 10.7-11.1 16 | bodyLength: 10.77-11.17 17 | height: 6.91-7.51 18 | 19 | holeDiameter: 1.1 20 | pitch: 2.54 21 | rowCount: 3 22 | columnCount: 1 23 | columnDX: -5.05 24 | -------------------------------------------------------------------------------- /molex/README.md: -------------------------------------------------------------------------------- 1 | MOLEX 2 | ===== 3 | 4 | * **Molex, LLC** 5 | * http://www.molex.com 6 | -------------------------------------------------------------------------------- /murata/README.md: -------------------------------------------------------------------------------- 1 | MURATA 2 | ====== 3 | 4 | * **Murata Manufacturing Co., Ltd.** 5 | * http://www.murata.com 6 | -------------------------------------------------------------------------------- /murata/bnx012-01.yaml: -------------------------------------------------------------------------------- 1 | name: BNX012-01 2 | description: Noise Suppressor for DC Power Lines 3 | keywords: IC, Analog, Filter 4 | 5 | pinout: 6 | B: 1 7 | CB: 2 8 | PSG: 3 9 | CG: 4-6 10 | 11 | properties: 12 | passive: B, CB, PSG, CG 13 | 14 | schematic: 15 | symbol: IC 16 | left: B, PSG 17 | right: CB, CG 18 | 19 | housing: 20 | pattern: custom 21 | 22 | bodyWidth: 10.8-11.2 23 | bodyLength: 11.8-12.2 24 | holeDiameter: 1.1 25 | padPosition: -2.5, -2.5, 2.5, -2.5, -2.5, 2.5, 2.5, 2.5, 0, -5, 0, 0 26 | -------------------------------------------------------------------------------- /murata/lqh88p.yaml: -------------------------------------------------------------------------------- 1 | name: LQH88P 2 | description: Power Inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: molded 10 | bodyWidth: 7.8-8.2 11 | bodyLength: 7.8-8.2 12 | height: 3.6-4 13 | leadWidth: 5 14 | leadLength: 1.7-2.1 15 | leadHeight: 0.3 16 | -------------------------------------------------------------------------------- /nichicon/README.md: -------------------------------------------------------------------------------- 1 | NICHICON 2 | ======== 3 | 4 | * **Nichicon Corp.** 5 | * http://www.nichicon.co.jp 6 | -------------------------------------------------------------------------------- /nichicon/ubx1e102mhl.yaml: -------------------------------------------------------------------------------- 1 | name: UBX1E102MHL 2 | description: Aluminum electrolytic capacitor, High Temperature, 1000uF 25V 3 | datasheet: http://products.nichicon.co.jp/en/pdf/XJA043/e-ubx.pdf 4 | keywords: Capacitor 5 | 6 | schematic: 7 | symbol: capacitor 8 | options: polarized 9 | 10 | housing: 11 | pattern: radial 12 | options: diameter, polarized 13 | 14 | bodyDiameter: 16 15 | height: 31.5 16 | leadDiameter: 0.8 17 | leadLength: 15 18 | leadSpan: 7-8 19 | -------------------------------------------------------------------------------- /nichicon/ubx1h101mpl.yaml: -------------------------------------------------------------------------------- 1 | name: UBX1H101MPL 2 | description: Aluminum electrolytic capacitor, High Temperature, 100uF 50V 3 | datasheet: http://products.nichicon.co.jp/en/pdf/XJA043/e-ubx.pdf 4 | keywords: Capacitor 5 | 6 | schematic: 7 | symbol: capacitor 8 | options: polarized 9 | 10 | housing: 11 | pattern: radial 12 | options: diameter, polarized 13 | 14 | bodyDiameter: 10 15 | height: 12.5 16 | leadDiameter: 0.6 17 | leadLength: 15 18 | leadSpan: 4.5-5.5 19 | -------------------------------------------------------------------------------- /nichicon/ubx1v102mhl.yaml: -------------------------------------------------------------------------------- 1 | name: UBX1V102MHL 2 | description: Aluminum electrolytic capacitor, High Temperature, 1000uF 35V 3 | datasheet: http://products.nichicon.co.jp/en/pdf/XJA043/e-ubx.pdf 4 | keywords: Capacitor 5 | 6 | schematic: 7 | symbol: capacitor 8 | options: polarized 9 | 10 | housing: 11 | pattern: radial 12 | options: diameter, polarized 13 | 14 | bodyDiameter: 18 15 | height: 40 16 | leadDiameter: 0.8 17 | leadLength: 15 18 | leadSpan: 7-8 19 | -------------------------------------------------------------------------------- /nichicon/ubx2a331mhl.yaml: -------------------------------------------------------------------------------- 1 | name: UBX2A331MHL 2 | description: Aluminum electrolytic capacitor, High Temperature, 330uF 100V 3 | datasheet: http://products.nichicon.co.jp/en/pdf/XJA043/e-ubx.pdf 4 | keywords: Capacitor 5 | 6 | schematic: 7 | symbol: capacitor 8 | options: polarized 9 | 10 | housing: 11 | pattern: radial 12 | options: diameter, polarized 13 | 14 | bodyDiameter: 18 15 | height: 31.5 16 | leadDiameter: 0.8 17 | leadLength: 15 18 | leadSpan: 7-8 19 | -------------------------------------------------------------------------------- /nxp/74hc4050.yaml: -------------------------------------------------------------------------------- 1 | name: 74HC4050 2 | description: Hex High-to-Low Level Shifter 3 | datasheet: http://www.nxp.com/documents/data_sheet/74HC4050_CNV.pdf 4 | keywords: IC, Digital, Buffer, Shifter 5 | 6 | pinout: 7 | IN: 8 | 1A: 3 9 | 2A: 5 10 | 3A: 7 11 | 4A: 9 12 | 5A: 11 13 | 6A: 14 14 | OUT: 15 | 1Y: 2 16 | 2Y: 4 17 | 3Y: 6 18 | 4Y: 10 19 | 5Y: 12 20 | 6Y: 15 21 | VCC: 1 22 | GND: 8 23 | NC: 13, 16 24 | 25 | properties: 26 | in: 1A, 2A, 3A, 4A, 5A, 6A 27 | out: 1Y, 2Y, 3Y, 4Y, 5Y, 6Y 28 | power: VCC 29 | ground: GND 30 | nc: NC 31 | 32 | schematic: 33 | symbol: IC 34 | left: IN, NC 35 | right: OUT, NC 36 | top: VCC 37 | bottom: GND 38 | 39 | housing: 40 | suffix: D 41 | outline: JEDEC MS-012 AC 42 | -------------------------------------------------------------------------------- /nxp/README.md: -------------------------------------------------------------------------------- 1 | NXP 2 | === 3 | 4 | * **NXP Semiconductors** 5 | * http://www.nxp.com 6 | -------------------------------------------------------------------------------- /nxp/bas521.yaml: -------------------------------------------------------------------------------- 1 | name: BAS521 2 | description: Single High Voltage Switching Diode 3 | keywords: Diode 4 | 5 | schematic: 6 | symbol: diode 7 | 8 | housing: 9 | outline: JEITA SC-79 10 | options: polarized 11 | 12 | padWidth: 0.8 13 | padHeight: 0.6 14 | padDistance: 1.1 15 | -------------------------------------------------------------------------------- /nxp/bat54s.yaml: -------------------------------------------------------------------------------- 1 | name: BAT54S 2 | description: Schottky Barrier Diodes 3 | keywords: Diode, Schottky 4 | 5 | pinout: 6 | A: 1 7 | CA: 3 8 | C: 2 9 | 10 | schematic: 11 | symbol: twin-diode 12 | options: schottky 13 | 14 | housing: 15 | outline: JEDEC TO-236 AB 16 | 17 | padWidth: 0.7 18 | padHeight: 0.6 19 | padDistance: 2 20 | -------------------------------------------------------------------------------- /nxp/bc846.yaml: -------------------------------------------------------------------------------- 1 | name: BC846 2 | variations: SOT23, SOT323, SOT416 3 | alias: BC846A, BC846B 4 | description: 65 V, 100 mA NPN General Purpose Transistor 5 | datasheet: http://www.nxp.com/documents/data_sheet/BC846_SER.pdf 6 | keywords: Transistor, NPN 7 | 8 | pinout: 9 | B: 1 10 | E: 2 11 | C: 3 12 | 13 | properties: 14 | in: B 15 | passive: C, E 16 | 17 | schematic: 18 | symbol: transistor 19 | options: npn 20 | 21 | housing@SOT23: 22 | suffix: '' 23 | outline: JEDEC TO-236 AB 24 | 25 | padWidth: 0.7 26 | padHeight: 0.6 27 | padDistance: 2 28 | 29 | housing@SOT323: 30 | suffix: 'W' 31 | outline: JEITA SC-70 32 | 33 | padWidth: 0.55 34 | padHeight: 0.6 35 | padDistance: 1.85 36 | 37 | housing@SOT416: 38 | suffix: 'T' 39 | outline: JEITA SC-75 40 | 41 | padWidth: 0.6 42 | padHeight: 0.5 43 | padDistance: 1.3 44 | -------------------------------------------------------------------------------- /nxp/bc856.yaml: -------------------------------------------------------------------------------- 1 | name: BC856 2 | alias: BC856A, BC856B 3 | description: PNP General Purpose Transistor 4 | datasheet: http://www.nxp.com/documents/data_sheet/BC856_BC857_BC858.pdf 5 | keywords: Transistor, PNP 6 | 7 | pinout: 8 | B: 1 9 | E: 2 10 | C: 3 11 | 12 | properties: 13 | in: B 14 | passive: C, E 15 | 16 | schematic: 17 | symbol: transistor 18 | options: pnp 19 | 20 | housing: 21 | outline: JEDEC TO-236 AB 22 | 23 | padWidth: 0.7 24 | padHeight: 0.6 25 | padDistance: 2 26 | -------------------------------------------------------------------------------- /nxp/bc857.yaml: -------------------------------------------------------------------------------- 1 | base: BC856 2 | name: BC857 3 | alias: BC857A, BC857B, BC857C 4 | -------------------------------------------------------------------------------- /nxp/bzv55.yaml: -------------------------------------------------------------------------------- 1 | name: BZV55-B 2 | alias: BZV55-C 3 | description: Voltage regulator diode 4 | datasheet: http://www.nxp.com/documents/data_sheet/BZV55_SER.pdf 5 | keywords: Diode, Zener 6 | 7 | schematic: 8 | symbol: diode 9 | options: zener 10 | 11 | housing: 12 | pattern: MELF 13 | options: polarized 14 | bodyDiameter: 1.45-1.6 15 | bodyLength: 3.3-3.7 16 | leadLength: 0.3 17 | 18 | padWidth: 1 19 | padHeight: 1.7 20 | padSpan: 4.3 21 | -------------------------------------------------------------------------------- /nxp/pmeg3030bep.yaml: -------------------------------------------------------------------------------- 1 | name: PMEG3030BEP 2 | description: 3 A low Vf MEGA Schottky barrier rectifier 3 | datasheet: http://www.nxp.com/documents/data_sheet/PMEG3030BEP.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: NXP SOD128 12 | -------------------------------------------------------------------------------- /nxp/tl431.yaml: -------------------------------------------------------------------------------- 1 | name: TL431 2 | alias: TL431A, TL431B 3 | suffix: CDBZR, IDBZR, QDBZR, FDT, SDT 4 | description: Adjustable precision shunt regulator 5 | datasheet: http://cache.nxp.com/documents/data_sheet/TL431_FAM.pdf 6 | keywords: IC, Analog, Regulator 7 | 8 | pinout: 9 | A: 3 10 | C: 1 11 | REF: 2 12 | 13 | properties: 14 | passive: A, C, REF 15 | 16 | schematic: 17 | symbol: IC 18 | top: REF 19 | left: A 20 | right: C 21 | 22 | housing: 23 | outline: JEDEC TO-236 AB 24 | 25 | padWidth: 0.7 26 | padHeight: 0.6 27 | padDistance: 2 28 | -------------------------------------------------------------------------------- /ohmite/README.md: -------------------------------------------------------------------------------- 1 | OHMITE 2 | ====== 3 | 4 | * **Ohmite Mfg. Co.** 5 | * http://ohmite.com 6 | -------------------------------------------------------------------------------- /ohmite/lvk24.yaml: -------------------------------------------------------------------------------- 1 | name: LVK24 2 | description: Four Terminal High Precision Current Sense Resistor, 1W 3 | datasheet: http://www.ohmite.com/cat/res_lvk.pdf 4 | keywords: Resistor, 1W 5 | 6 | pinout: 7 | LEFT: 8 | V: 1 9 | I: 2 10 | RIGHT: 11 | V: 4 12 | I: 3 13 | 14 | properties: 15 | passive: V, I 16 | 17 | schematic: 18 | symbol: IC 19 | left: LEFT 20 | right: RIGHT 21 | 22 | housing: 23 | pattern: custom 24 | bodyWidth: 6.2-6.6 25 | bodyLength: 3-3.4 26 | height: 0.35-0.65 27 | leadCount: 4 28 | 29 | padWidth: 3.25 30 | padHeight: 1.9 31 | padPosition: -2.625, -1.25, -2.625, 1.25, 2.625, 1.25, 2.625, -1.25 32 | -------------------------------------------------------------------------------- /onsemi/README.md: -------------------------------------------------------------------------------- 1 | ONSEMI 2 | ====== 3 | 4 | * **ON Semiconductor** 5 | * http://www.onsemi.com 6 | -------------------------------------------------------------------------------- /onsemi/bas40l.yaml: -------------------------------------------------------------------------------- 1 | name: BAS40L 2 | description: 40 V Schottky Barrier Diode 3 | datasheet: http://www.onsemi.com/pub_link/Collateral/BAS40LT1-D.PDF 4 | keywords: Diode, Schottky 5 | 6 | pinout: 7 | A: 1 8 | C: 3 9 | NC: 2 10 | 11 | schematic: 12 | symbol: diode 13 | options: schottky 14 | 15 | housing: 16 | outline: JEDEC TO-236 AB 17 | 18 | padWidth: 0.9 19 | padHeight: 0.8 20 | padDistance: 2 21 | -------------------------------------------------------------------------------- /onsemi/mbra340t3g.yaml: -------------------------------------------------------------------------------- 1 | name: MBRA340T3G 2 | description: Surface Mount Schottky Power Rectifier 3 | datasheet: http://www.onsemi.com/pub_link/Collateral/MBRA340T3-D.PDF 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | pattern: molded 12 | options: polarized 13 | bodyWidth: 2.29-2.92 14 | bodyLength: 4.06-4.57 15 | height: 1.97-2.2 16 | leadSpan: 4.83-5.59 17 | leadWidth: 1.27-1.63 18 | leadLength: 0.76-1.52 19 | 20 | padWidth: 2 21 | padHeight: 2 22 | padDistance: 4 23 | -------------------------------------------------------------------------------- /onsemi/mbrb20100ct.yaml: -------------------------------------------------------------------------------- 1 | name: MBRB20100CTG 2 | description: Schottky Barrier Rectifier, 20 A, 100 V 3 | datasheet: http://www.onsemi.com/pub_link/Collateral/MBRB20100CT-D.PDF 4 | keywords: Diode, Schottky 5 | 6 | pinout: 7 | A1: 1 8 | A2: 3 9 | C: 4 10 | 11 | schematic: 12 | symbol: twin-diode 13 | options: schottky 14 | 15 | housing: 16 | pattern: PAK 17 | bodyWidth: 8.64-9.65 18 | bodyLength: 9.65-10.29 19 | height: 4.06-4.83 20 | leadWidth: 0.51-0.89 21 | leadLength: 2.29-2.79 22 | leadSpan: 14.60-15.88 23 | leadCount: 3 24 | pitch: 2.54 25 | tabWidth: 8.64-9.65 26 | tabLength: 7.11-8.13 27 | tabLedge: 1.14-1.40 28 | 29 | padWidth1: 3.504 30 | padHeight1: 1.016 31 | padWidth2: 8.38 32 | padHeight2: 10.49 33 | padSpan: 16.155 34 | -------------------------------------------------------------------------------- /onsemi/mbrs540t3g.yaml: -------------------------------------------------------------------------------- 1 | name: MBRS540T3G 2 | description: Surface Mount Schottky Power Rectifier 3 | datasheet: http://www.onsemi.com/pub/Collateral/MBRS540T3-D.PDF 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | pattern: molded 12 | options: polarized 13 | bodyWidth: 5.59-6.1 14 | bodyLength: 6.6-7.11 15 | height: 1.9-2.41 16 | leadSpan: 7.75-8.13 17 | leadWidth: 2.92-3.07 18 | leadLength: 0.76-1.27 19 | 20 | padWidth: 2.8 21 | padHeight: 3.8 22 | padSpace: 4.35 23 | -------------------------------------------------------------------------------- /onsemi/mmbt3904l.yaml: -------------------------------------------------------------------------------- 1 | name: MMBT3904L 2 | prefix: S 3 | description: General Purpose NPN Transistor 4 | datasheet: http://www.onsemi.com/pub_link/Collateral/MMBT3904LT1-D.PDF 5 | keywords: Transistor, NPN 6 | 7 | pinout: 8 | B: 1 9 | E: 2 10 | C: 3 11 | 12 | properties: 13 | in: B 14 | passive: C, E 15 | 16 | schematic: 17 | symbol: transistor 18 | options: npn 19 | 20 | housing: 21 | outline: JEDEC TO-236 AB 22 | 23 | padWidth: 0.9 24 | padHeight: 0.8 25 | padDistance: 2 26 | -------------------------------------------------------------------------------- /onsemi/mmsd4148.yaml: -------------------------------------------------------------------------------- 1 | name: MMSD4148 2 | description: Switching Diode 3 | datasheet: http://www.onsemi.com/pub_link/Collateral/MMSD4148T1-D.PDF 4 | keywords: Diode 5 | 6 | schematic: 7 | symbol: diode 8 | 9 | housing: 10 | pattern: SOD 11 | options: polarized 12 | 13 | bodyWidth: 1.4-1.8 14 | bodyLength: 2.54-2.84 15 | height: 0.94-1.35 16 | leadWidth: 0.51-0.71 17 | leadLength: 0.25 18 | leadSpan: 3.56-3.86 19 | 20 | padWidth: 0.91 21 | padHeight: 1.22 22 | padSpan: 4.19 23 | -------------------------------------------------------------------------------- /onsemi/nsi50350ast3g.yaml: -------------------------------------------------------------------------------- 1 | name: NSI50350AST3G 2 | description: Constant Current Regulator & LED Driver, 50 V, 350 mA, 5.8 W Package 3 | datasheet: http://www.onsemi.com/pub/Collateral/NSI50350AS-D.PDF 4 | keywords: IC, Current, Regulator 5 | 6 | pinout: 7 | C: 1 8 | A: 2 9 | 10 | schematic: 11 | symbol: IC 12 | left: A 13 | right: C 14 | 15 | housing: 16 | outline: JEDEC DO-214 AB 17 | options: polarized 18 | 19 | padWidth: 2.8 20 | padHeight: 3.8 21 | padSpace: 4.35 22 | -------------------------------------------------------------------------------- /onsemi/nuf2042xv6.yaml: -------------------------------------------------------------------------------- 1 | name: NUF2042XV6 2 | description: EMI Filter, Upstream Terminator with ESD Protection 3 | datasheet: http://www.onsemi.com/pub/Collateral/NUF2030XV6-D.PDF 4 | keywords: IC, Analog, Filter, Protection 5 | 6 | pinout: 7 | D1I: 1 8 | D2I: 3 9 | D1O: 6 10 | D2O: 4 11 | 12 | VBUS: 5 13 | GND: 2 14 | 15 | properties: 16 | in: D1I, D2I 17 | out: D1O, D2O 18 | power: VBUS 19 | ground: GND 20 | 21 | schematic: 22 | symbol: IC 23 | left: D1I, D2I 24 | right: D1O, D2O 25 | top: VBUS 26 | bottom: GND 27 | 28 | housing: 29 | pattern: SOT 30 | bodyWidth: 1.1-1.3 31 | bodyLength: 1.5-1.7 32 | height: 0.5-0.6 33 | leadWidth: 0.17-0.27 34 | leadLength: 0.1-0.3 35 | leadSpan: 1.5-1.7 36 | leadCount: 6 37 | pitch: 0.5 38 | 39 | padWidth: 0.45 40 | padHeight: 0.3 41 | padDistance: 1.35 42 | -------------------------------------------------------------------------------- /onsemi/nuf2221w1.yaml: -------------------------------------------------------------------------------- 1 | name: NUF2221W1 2 | description: USB Upstream Terminator with ESD Protection 3 | datasheet: http://www.onsemi.com/pub/Collateral/NUF2221W1T2-D.PDF 4 | keywords: IC, Analog, ESD, Protection 5 | 6 | pinout: 7 | D1I: 1 8 | D2I: 3 9 | D1C: 6 10 | D2C: 4 11 | 12 | VBUS: 5 13 | GND: 2 14 | 15 | properties: 16 | bidir: D1I, D2I, D1C, D2C 17 | power: VBUS 18 | ground: GND 19 | 20 | schematic: 21 | symbol: IC 22 | left: D1C, D2C 23 | right: D1I, D2I 24 | top: VBUS 25 | bottom: GND 26 | 27 | housing: 28 | outline: JEITA SC-88 29 | 30 | padWidth: 0.5 31 | padHeight: 0.4 32 | padDistance: 1.9 33 | -------------------------------------------------------------------------------- /onsemi/nup2105l.yaml: -------------------------------------------------------------------------------- 1 | name: NUP2105L 2 | alias: SZNUP2105L 3 | description: Dual Line CAN Bus Protector 4 | datasheet: http://www.onsemi.com/pub_link/Collateral/NUP2105L-D.PDF 5 | keywords: Diode, TVS 6 | 7 | pinout: 8 | A1: 1 9 | A2: 2 10 | A3: 3 11 | 12 | schematic: 13 | symbol: twin-diode 14 | options: TVS 15 | 16 | housing: 17 | outline: JEDEC TO-236 AB 18 | 19 | padWidth: 0.9 20 | padHeight: 0.8 21 | padDistance: 2 22 | -------------------------------------------------------------------------------- /onsemi/ss14.yaml: -------------------------------------------------------------------------------- 1 | name: SS14 2 | description: Schottky Rectifier 3 | datasheet: https://www.fairchildsemi.com/datasheets/SS/SS14.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AC 12 | options: polarized 13 | 14 | padWidth: 2.65 15 | padHeight: 1.75 16 | padDistance: 4.3 17 | -------------------------------------------------------------------------------- /oupiin/2212-2x10g00d.yaml: -------------------------------------------------------------------------------- 1 | name: 2212-2X10G00D 2 | description: Pin Header 1.27mmX2.54mm (0.050"X0.100") 3 | datasheet: http://www.oupiin.com/download_ii.html?dID=73 4 | keywords: Connector, Male 5 | 6 | pinout: 1-20 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 5 16 | bodyLength: 12.5 17 | height: 6.57 18 | 19 | padWidth: 3.73 20 | padHeight: 0.7 21 | rowCount: 10 22 | columnCount: 2 23 | verticalPitch: 1.27 24 | horizontalPitch: 4.8 25 | -------------------------------------------------------------------------------- /panasonic/evq.yaml: -------------------------------------------------------------------------------- 1 | name: EVQ 2 | suffixes: PLMA15, PLDA15, PT5A15, PLHA15, PT9A15, 3PLA15 3 | description: Microminiature SMT Top Actuated Pushbutton 4 | datasheet: https://datasheet.octopart.com/EVQ-PLMA15-Panasonic-datasheet-13284722.pdf 5 | keywords: Pushbutton 6 | 7 | pinout: 8 | S1: 1, 2 9 | S2: 3, 4 10 | CASE: 5, 6 11 | 12 | schematic: 13 | symbol: pushbutton 14 | left: S1 15 | right: S2 16 | bottom: CASE 17 | 18 | housing: 19 | pattern: custom 20 | bodyWidth: 4.9 21 | bodyLength: 4.9 22 | height: 1.5 23 | 24 | padWidth: 1.2 25 | padHeight: 2 26 | rowCount: 2 27 | columnCount: 2 28 | horizontalPitch: 4.3 29 | verticalPitch: 5.4 30 | 31 | padWidth1: 0.9 32 | padHeight1: 1 33 | padPosition1: 2.45, 0 34 | 35 | padWidth2: 0.9 36 | padHeight2: 1 37 | padPosition2: -2.45, 0 38 | -------------------------------------------------------------------------------- /pulse/README.md: -------------------------------------------------------------------------------- 1 | PULSE 2 | ===== 3 | 4 | * **Pulse Electronics* 5 | * http://pulseelectronics.com 6 | -------------------------------------------------------------------------------- /resistor/r0201.yaml: -------------------------------------------------------------------------------- 1 | name: R0201 2 | description: Chip resistor 0.6x0.3 mm 3 | keywords: Resistor, 1/20W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 0.52-0.68 11 | bodyWidth: 0.27-0.33 12 | height: 0.2-0.26 13 | leadLength: 0.1-0.2 14 | -------------------------------------------------------------------------------- /resistor/r0402.yaml: -------------------------------------------------------------------------------- 1 | name: R0402 2 | description: Chip resistor 1x0.5 mm 3 | keywords: Resistor, 1/16W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 0.9-1.1 11 | bodyWidth: 0.45-0.55 12 | height: 0.3-0.4 13 | leadLength: 0.1-0.3 14 | -------------------------------------------------------------------------------- /resistor/r0603.yaml: -------------------------------------------------------------------------------- 1 | name: R0603 2 | description: Chip resistor 1.6x0.8 mm 3 | keywords: Resistor, 1/10W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.5-1.7 11 | bodyWidth: 0.7-0.9 12 | height: 0.35-0.55 13 | leadLength: 0.15-0.45 14 | -------------------------------------------------------------------------------- /resistor/r0805.yaml: -------------------------------------------------------------------------------- 1 | name: R0805 2 | description: Chip resistor 2x1.25 mm 3 | keywords: Resistor, 1/8W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 1.85-2.15 11 | bodyWidth: 1.1-1.4 12 | height: 0.45-0.65 13 | leadLength: 0.15-0.65 14 | -------------------------------------------------------------------------------- /resistor/r1206.yaml: -------------------------------------------------------------------------------- 1 | name: R1206 2 | description: Chip resistor 3.1x1.55 mm 3 | keywords: Resistor, 1/4W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 2.95-3.25 11 | bodyWidth: 1.3-1.7 12 | height: 0.45-0.65 13 | leadLength: 0.15-0.65 14 | -------------------------------------------------------------------------------- /resistor/r1210.yaml: -------------------------------------------------------------------------------- 1 | name: R1210 2 | description: Chip resistor 3.1x2.6 mm 3 | keywords: Resistor, 1/2W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 2.95-3.25 11 | bodyWidth: 2.45-2.75 12 | height: 0.45-0.65 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /resistor/r2010.yaml: -------------------------------------------------------------------------------- 1 | name: R2010 2 | description: Chip resistor 4.9x2.4 mm 3 | keywords: Resistor, 3/4W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 4.75-5.05 11 | bodyWidth: 2.25-2.55 12 | height: 0.45-0.65 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /resistor/r2512.yaml: -------------------------------------------------------------------------------- 1 | name: R2512 2 | description: Chip resistor 6.35x3.2 mm 3 | keywords: Resistor, 1W 4 | 5 | schematic: 6 | symbol: resistor 7 | 8 | housing: 9 | pattern: chip 10 | bodyLength: 6.2-6.5 11 | bodyWidth: 3.05-3.35 12 | height: 0.45-0.65 13 | leadLength: 0.25-0.75 14 | -------------------------------------------------------------------------------- /rohm/README.md: -------------------------------------------------------------------------------- 1 | ROHM 2 | ==== 3 | 4 | * **ROHM Co., Ltd.** 5 | * http://www.rohm.com 6 | -------------------------------------------------------------------------------- /rohm/msl0104rgb.yaml: -------------------------------------------------------------------------------- 1 | name: MSL0104RGB 2 | description: Side view RGB LED 3 | datasheet: http://www.rohm.com/web/global/datasheet/MSL0104RGBU 4 | keywords: LED 5 | 6 | pinout: 7 | RA: 1, 7 8 | RC: 4 9 | GA: 2 10 | GC: 3 11 | BA: 6 12 | BC: 5 13 | 14 | properties: 15 | passive: RA, RC, GA, GC, BA, BC 16 | 17 | schematic: 18 | symbol: IC 19 | left: RA, GA, BA 20 | right: RC, GC, BC 21 | 22 | housing: 23 | pattern: custom 24 | options: polarized 25 | bodyWidth: 2.2 26 | bodyLength: 6.4 27 | height: 2.15 28 | bodyColor: white 29 | 30 | padWidth1: 1.58 31 | padHeight1: 1.06 32 | padPosition1: 0.25, -2.95 33 | 34 | padWidth2: 2.18 35 | padHeight2: 0.6 36 | pitch2: 0.9 37 | rowCount2: 5 38 | columnCount2: 1 39 | columnDX2: 0.55 40 | 41 | padWidth3: 1.58 42 | padHeight3: 1.06 43 | padPosition3: 0.25, 2.95 44 | -------------------------------------------------------------------------------- /samtec/README.md: -------------------------------------------------------------------------------- 1 | SAMTEC 2 | ====== 3 | 4 | * **Samtec** 5 | * https://www.samtec.com 6 | -------------------------------------------------------------------------------- /samtec/esq-108-12-t.yaml: -------------------------------------------------------------------------------- 1 | name: ESQ-108-12-T 2 | description: .100" (2.54 mm) Shrouded Terminal Strip, Cable Mate, 8x3 3 | datasheet: http://suddendocs.samtec.com/catalog_english/esq_th.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 7 | ROW1: 8 | '': 1, 4, 7, 10, 13, 16, 19, 22 9 | ROW2: 10 | '': 2, 5, 8, 11, 14, 17, 20, 23 11 | ROW3: 12 | '': 3, 6, 9, 12, 15, 18, 21, 24 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | options: square-pin 22 | right: ROW1-4 23 | 24 | housing: 25 | pattern: custom 26 | options: polarized 27 | bodyWidth: 7.49 28 | bodyLength: 20.83 29 | height: 11.05 30 | 31 | holeDiameter: 1 32 | rowCount: 8 33 | columnCount: 3 34 | verticalPitch: 2.54 35 | horizontalPitch: -2.54 36 | -------------------------------------------------------------------------------- /samtec/esq-116-12-t.yaml: -------------------------------------------------------------------------------- 1 | name: ESQ-116-12-T 2 | description: .100" (2.54 mm) Shrouded Terminal Strip, Cable Mate, 16x3 3 | datasheet: http://suddendocs.samtec.com/catalog_english/esq_th.pdf 4 | keywords: Connector, Female 5 | 6 | pinout: 7 | ROW1: 8 | '': 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46 9 | ROW2: 10 | '': 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47 11 | ROW3: 12 | '': 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | options: square-pin 22 | right: ROW1-4 23 | 24 | housing: 25 | pattern: custom 26 | options: polarized 27 | bodyWidth: 7.49 28 | bodyLength: 41.15 29 | height: 11.05 30 | 31 | holeDiameter: 1 32 | rowCount: 16 33 | columnCount: 3 34 | verticalPitch: 2.54 35 | horizontalPitch: -2.54 36 | -------------------------------------------------------------------------------- /samtec/mtmm-110-06-d.yaml: -------------------------------------------------------------------------------- 1 | name: MTMM-110-06-D 2 | description: 2.00 mm Variable Post Height Terminal Strip, 10x2 3 | datasheet: http://suddendocs.samtec.com/catalog_english/mtmm_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-20 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 4 16 | bodyLength: 20 17 | height: 10.08 18 | leadCount: 20 19 | 20 | padWidth: 1.35 21 | padHeight: 1.35 22 | holeDiameter: 0.9 23 | rowCount: 10 24 | columnCount: 2 25 | pitch: 2 26 | -------------------------------------------------------------------------------- /samtec/tst-105-01-d.yaml: -------------------------------------------------------------------------------- 1 | name: TST-105-01-D 2 | description: .100" (2.54 mm) Shrouded Terminal Strip, Cable Mate, 5x2 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tst_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-10 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 9.27 16 | bodyLength: 20.32 17 | height: 8.89 18 | leadCount: 10 19 | 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 5 24 | columnCount: 2 25 | pitch: 2.54 26 | -------------------------------------------------------------------------------- /samtec/tst-107-01-d.yaml: -------------------------------------------------------------------------------- 1 | name: TST-107-01-D 2 | description: .100" (2.54 mm) Shrouded Terminal Strip, Cable Mate, 7x2 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tst_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-14 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 9.27 16 | bodyLength: 25.4 17 | height: 8.89 18 | leadCount: 14 19 | 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 7 24 | columnCount: 2 25 | pitch: 2.54 26 | -------------------------------------------------------------------------------- /samtec/tst-110-01-d.yaml: -------------------------------------------------------------------------------- 1 | name: TST-110-01-D 2 | description: .100" (2.54 mm) Shrouded Terminal Strip, Cable Mate, 7x2 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tst_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-20 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 9.27 16 | bodyLength: 33.02 17 | height: 8.89 18 | leadCount: 14 19 | 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 10 24 | columnCount: 2 25 | pitch: 2.54 26 | -------------------------------------------------------------------------------- /samtec/tsw-107-05-s.yaml: -------------------------------------------------------------------------------- 1 | name: TSW-107-05-S 2 | description: Throuh-Hole 0.25" SQ Post Header, 7x1 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tsw_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-7 7 | 8 | schematic: 9 | symbol: connector 10 | options: single, square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 2.54 16 | bodyLength: 17.78 17 | height: 5.21 18 | 19 | holeDiameter: 1 20 | rowCount: 7 21 | columnCount: 1 22 | pitch: 2.54 23 | -------------------------------------------------------------------------------- /samtec/tsw-115-05-t.yaml: -------------------------------------------------------------------------------- 1 | name: TSW-115-05-T 2 | description: Throuh-Hole 0.25" SQ Post Header, 15x3 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tsw_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 7 | ROW1: 8 | '': 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43 9 | ROW2: 10 | '': 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44 11 | ROW3: 12 | '': 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | options: square-pin 22 | right: ROW1-4 23 | 24 | housing: 25 | pattern: custom 26 | options: polarized 27 | bodyWidth: 7.62 28 | bodyLength: 38.1 29 | height: 5.21 30 | 31 | holeDiameter: 1 32 | rowCount: 15 33 | columnCount: 3 34 | pitch: 2.54 35 | -------------------------------------------------------------------------------- /samtec/tsw-116-05-t.yaml: -------------------------------------------------------------------------------- 1 | name: TSW-116-05-T 2 | description: Throuh-Hole 0.25" SQ Post Header, 16x3 3 | datasheet: http://suddendocs.samtec.com/catalog_english/tsw_th.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 7 | ROW1: 8 | '': 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46 9 | ROW2: 10 | '': 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47 11 | ROW3: 12 | '': 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48 13 | 14 | parts: 15 | Row 1: ROW1 16 | Row 2: ROW2 17 | Row 3: ROW3 18 | 19 | schematic: 20 | symbol: connector 21 | options: square-pin 22 | right: ROW1-4 23 | 24 | housing: 25 | pattern: custom 26 | options: polarized 27 | bodyWidth: 7.62 28 | bodyLength: 40.64 29 | height: 5.21 30 | 31 | holeDiameter: 1 32 | rowCount: 16 33 | columnCount: 3 34 | pitch: 2.54 35 | -------------------------------------------------------------------------------- /st/README.md: -------------------------------------------------------------------------------- 1 | ST 2 | == 3 | 4 | * **STMicroelectronics** 5 | * http://www.st.com 6 | -------------------------------------------------------------------------------- /st/l293d.yaml: -------------------------------------------------------------------------------- 1 | name: L293D 2 | description: Quadruple Half-H Driver 3 | datasheet: http://www.ti.com/lit/ds/symlink/l293.pdf 4 | keywords: IC, Driver 5 | variations: SO-16, DIP-16 6 | 7 | pinout: 8 | ENABLE: 9 | ENABLE1: 1 10 | ENABLE2: 9 11 | OUT: 12 | OUT1: 3 13 | OUT2: 6 14 | OUT3: 11 15 | OUT4: 14 16 | INPUT: 17 | IN1: 2 18 | IN2: 7 19 | IN3: 10 20 | IN4: 15 21 | VCC1: 16 22 | VCC2: 8 23 | GND1: 4, 5 24 | GND2: 12, 13 25 | 26 | properties: 27 | power: VCC1, VCC2 28 | ground: GND1, GND2 29 | in: IN1, IN2, IN3, IN4, ENABLE1, ENABLE2 30 | out: OUT1, OUT2, OUT3, OUT4 31 | 32 | schematic: 33 | symbol: IC 34 | left: ENABLE1, IN1, OUT1, GND1, OUT2, IN2, VCC2 35 | right: VCC1, IN4, OUT4, GND2, OUT3, IN3, ENABLE2 36 | 37 | housing@DIP-16: 38 | outline: JEDEC MS-001 AB 39 | 40 | housing@SO-16: 41 | suffix: D 42 | outline: JEDEC MS-012 AC 43 | -------------------------------------------------------------------------------- /st/l9637.yaml: -------------------------------------------------------------------------------- 1 | name: L9637D 2 | description: Monolithic bus driver with ISO 9141 interface 3 | datasheet: http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00000234.pdf 4 | keywords: IC, Digital, Transceiver 5 | 6 | pinout: 7 | KLINE: 8 | K: 6 9 | LI: 8 10 | RTX: 11 | TX: 4 12 | RX: 1 13 | LO: 2 14 | VS: 7 15 | VCC: 3 16 | GND: 5 17 | 18 | properties: 19 | in: TX, LI 20 | out: RX, LO 21 | bidir: K 22 | power: VS, VCC 23 | ground: GND 24 | 25 | schematic: 26 | symbol: IC 27 | left: KLINE 28 | right: RTX, LO 29 | top: VS, VCC 30 | bottom: GND 31 | 32 | housing: 33 | outline: JEDEC MS-012 AA 34 | leadWidth: 0.28-0.48 35 | -------------------------------------------------------------------------------- /st/ld1117.yaml: -------------------------------------------------------------------------------- 1 | name: LD1117 2 | variations: SOT-223 3 | description: Adjustable and Fixed Low Drop Positive Voltage Regulator 4 | datasheet: http://www.st.com/resource/en/datasheet/ld1117.pdf 5 | keywords: IC, Analog, LDO, Regulator 6 | 7 | pinout: 8 | VIN: 3 9 | VOUT: 2, 4 10 | GND: 1 11 | 12 | properties: 13 | in: VIN 14 | out: VOUT 15 | power: VIN, VOUT 16 | ground: GND 17 | 18 | schematic: 19 | symbol: IC 20 | left: VIN 21 | right: VOUT 22 | bottom: GND 23 | 24 | housing@SOT-223: 25 | suffix: S, S12, S18, S25, S33, S50 26 | outline: JEDEC TO-261 AA 27 | -------------------------------------------------------------------------------- /st/stm32f030f.yaml: -------------------------------------------------------------------------------- 1 | name: STM32F030F 2 | suffix: 4T6 3 | description: 32-bit ARM Cortex-M0 CPU 4 | datasheet: http://www.st.com/resource/en/datasheet/stm32f030f4.pdf 5 | keywords: IC, Digital, CPU, ARM 6 | 7 | pinout: 8 | PORTA: 9 | PA0-7: 6-13 10 | PA9-10: 17, 18 11 | PA13-14: 19, 20 12 | PORTB: 13 | PB1: 14 14 | PORTF: 15 | PF0-1: 2, 3 16 | CTRL: 17 | BOOT0: 1 18 | ~NRST: 4 19 | 20 | VDD: 16 21 | VDDA: 5 22 | VSS: 15 23 | 24 | OSC_IN: 2 25 | OSC_OUT: 3 26 | 27 | properties: 28 | in: BOOT0, ~NRST 29 | bidir: PA0-7, PA9-10, PA13-14, PB1, PF0-1 30 | power: VDD, VDDA 31 | ground: VSS 32 | inverted: ~NRST 33 | 34 | schematic: 35 | symbol: IC 36 | left: PORTB, PORTF, CTRL 37 | right: PORTA 38 | top: VDD, VDDA 39 | bottom: VSS 40 | 41 | housing: 42 | outline: JEDEC MO-153 AC 43 | -------------------------------------------------------------------------------- /st/stps40150.yaml: -------------------------------------------------------------------------------- 1 | name: STPS40150 2 | description: High Voltage Power Schottky Rectifier 3 | datasheet: http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00004991.pdf 4 | keywords: Diode, Schottky 5 | 6 | pinout: 7 | A1: 1 8 | A2: 3 9 | C: 4 10 | 11 | schematic: 12 | symbol: twin-diode 13 | options: schottky 14 | 15 | housing: 16 | pattern: PAK 17 | suffix: CG 18 | bodyWidth: 8.95-9.35 19 | bodyLength: 10-10.4 20 | height: 4.4-4.6 21 | leadWidth: 0.7-0.93 22 | leadLength: 2.4-3.2 23 | leadSpan: 15-15.85 24 | leadCount: 3 25 | pitch: 2.54 26 | tabWidth: 10-10.4 27 | tabLength: 7.5 28 | tabLedge: 1.27-1.4 29 | 30 | padWidth1: 3.7 31 | padHeight1: 1.3 32 | padWidth2: 8.9 33 | padHeight2: 10.3 34 | padSpan: 16.9 35 | -------------------------------------------------------------------------------- /st/stps5l60.yaml: -------------------------------------------------------------------------------- 1 | name: STPS5L60 2 | description: Power Schottky rectifier, 5 A, 60 V 3 | datasheet: http://www.st.com/resource/en/datasheet/stps5l60.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AB 12 | suffix: S 13 | options: polarized 14 | 15 | padWidth: 1.54 16 | padHeight: 3.14 17 | padSpace: 5.11 18 | -------------------------------------------------------------------------------- /stocko/README.md: -------------------------------------------------------------------------------- 1 | STOCKO 2 | ====== 3 | 4 | * **Stocko Contact GmbH & Co. KG** 5 | * http://stocko-contact.com 6 | -------------------------------------------------------------------------------- /stocko/mks1855.yaml: -------------------------------------------------------------------------------- 1 | name: MKS1855-6-0-505 2 | description: Pin connector with snap-in locking device for vertical connections 3 | datasheet: http://www.stocko-contact.com/catalog-pdf/steckverbindersystem-raster-2,5-mm.pdf 4 | keywords: Connector 5 | 6 | pinout: 1-5 7 | 8 | schematic: 9 | symbol: connector 10 | options: single 11 | showPinNames: false 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 7.5 17 | bodyLength: 17.2 18 | height: 23.3 19 | pitch: 2.5 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 5 24 | columnCount: 1 25 | -------------------------------------------------------------------------------- /stocko/mks1856.yaml: -------------------------------------------------------------------------------- 1 | name: MKS1856-6-0-606 2 | description: Pin connector with snap-in locking device for vertical connections 3 | datasheet: http://www.stocko-contact.com/catalog-pdf/steckverbindersystem-raster-2,5-mm.pdf 4 | keywords: Connector 5 | 6 | pinout: 1-6 7 | 8 | schematic: 9 | symbol: connector 10 | options: single 11 | showPinNames: false 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 7.5 17 | bodyLength: 19.7 18 | height: 23.3 19 | pitch: 2.5 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 6 24 | columnCount: 1 25 | -------------------------------------------------------------------------------- /stocko/mks1858.yaml: -------------------------------------------------------------------------------- 1 | name: MKS1858-6-0-808 2 | description: Pin connector with snap-in locking device for vertical connections 3 | datasheet: http://www.stocko-contact.com/catalog-pdf/steckverbindersystem-raster-2,5-mm.pdf 4 | keywords: Connector 5 | 6 | pinout: 1-8 7 | 8 | schematic: 9 | symbol: connector 10 | options: single 11 | showPinNames: false 12 | 13 | housing: 14 | pattern: custom 15 | options: polarized 16 | bodyWidth: 7.5 17 | bodyLength: 24.7 18 | height: 23.3 19 | pitch: 2.5 20 | padWidth: 1.5 21 | padHeight: 1.5 22 | holeDiameter: 1 23 | rowCount: 8 24 | columnCount: 1 25 | -------------------------------------------------------------------------------- /tdk/README.md: -------------------------------------------------------------------------------- 1 | TDK 2 | === 3 | 4 | * **TDK Corporation** 5 | * http://tdk.com 6 | -------------------------------------------------------------------------------- /tdk/b82422t.yaml: -------------------------------------------------------------------------------- 1 | name: B82422T 2 | description: SMT inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: molded 10 | bodyLength: 2.9-3.5 11 | bodyWidth: 2.2-2.8 12 | height: 1.9-2.1 13 | leadWidth: 1.9-2.1 14 | leadLength: 0.3-0.7 15 | 16 | padWidth: 1.15 17 | padHeight: 2.7 18 | padSpace: 2.1 19 | -------------------------------------------------------------------------------- /tdk/b82477g4.yaml: -------------------------------------------------------------------------------- 1 | name: B82477G4 2 | description: SMT power inductor 3 | keywords: Inductor 4 | 5 | schematic: 6 | symbol: inductor 7 | 8 | housing: 9 | pattern: molded 10 | bodyLength: 12.8 11 | bodyWidth: 12.8 12 | height: 8 13 | leadWidth: 4.8-5.2 14 | leadLength: 1.3-1.7 15 | 16 | padWidth: 3.1 17 | padHeight: 5.6 18 | padSpace: 7 19 | -------------------------------------------------------------------------------- /te/1-216093-6.yaml: -------------------------------------------------------------------------------- 1 | name: 1-216093-6 2 | description: AMP-LATCH 2.54 DIL-Plug Connector without Retention Legs 3 | datasheet: http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=216093&DocType=Customer+Drawing 4 | keywords: Connector, Male 5 | 6 | pinout: 1-16 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 6.7 16 | bodyLength: 25.4 17 | height: 6.5 18 | 19 | holeDiameter: 1 20 | rowCount: 8 21 | columnCount: 2 22 | pitch: 2.54 23 | -------------------------------------------------------------------------------- /te/1206sfh.yaml: -------------------------------------------------------------------------------- 1 | name: 1206SFH 2 | suffix: 100F/24, 120F/24, 150F/24, 200F/24, 250F/24, 300F/24 3 | description: 1206 (3216mm) High-Current-Rated Chip Fuse 4 | keywords: Fuse 5 | 6 | schematic: 7 | symbol: fuse 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 1.4-1.6 12 | bodyLength: 3-3.4 13 | height: 0.77-1.17 14 | leadLength: 0.26-0.76 15 | 16 | padWidth: 1.45 17 | padHeight: 1.8 18 | padSpan: 4.4 19 | -------------------------------------------------------------------------------- /te/1658525-2.yaml: -------------------------------------------------------------------------------- 1 | name: 1658525-2 2 | description: Connector, Slimline PCB, 17x2 3 | datasheet: http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1658525%7FD1%7Fpdf%7FEnglish%7FENG_CD_1658525_D1.pdf 4 | keywords: Connector, Male 5 | 6 | pinout: 1-34 7 | 8 | schematic: 9 | symbol: connector 10 | options: square-pin 11 | 12 | housing: 13 | pattern: custom 14 | options: polarized 15 | bodyWidth: 7.11 16 | bodyLength: 48.41 17 | height: 7.57 18 | 19 | holeDiameter: 0.9 20 | rowCount: 17 21 | columnCount: 2 22 | pitch: 2.54 23 | -------------------------------------------------------------------------------- /te/2410sfv.yaml: -------------------------------------------------------------------------------- 1 | name: 2410SFV 2 | description: Very Fast-Acting Fuse 3 | keywords: Fuse 4 | 5 | schematic: 6 | symbol: fuse 7 | 8 | housing: 9 | pattern: chip 10 | bodyWidth: 2.34-2.64 11 | bodyLength: 5.95-6.25 12 | height: 1.96-2.36 13 | leadLength: 0.97-1.73 14 | 15 | padWidth: 2.8 16 | padHeight: 2.8 17 | padSpan: 8.6 18 | -------------------------------------------------------------------------------- /te/63849-1.yaml: -------------------------------------------------------------------------------- 1 | name: 63849-1 2 | description: Faston 250 PCB Tab 3 | datasheet: http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=63849&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=63849-1 4 | keywords: Connector, Terminal 5 | 6 | pinout: 1-2 7 | 8 | schematic: 9 | symbol: connector 10 | 11 | housing: 12 | pattern: custom 13 | bodyWidth: 0.76-0.85 14 | bodyLength: 7.92 15 | height: 10.81 16 | bodyColor: silver 17 | 18 | holeDiameter: 1.4 19 | pitch: 5.08 20 | columnCount: 1 21 | rowCount: 2 22 | 23 | -------------------------------------------------------------------------------- /te/README.md: -------------------------------------------------------------------------------- 1 | TE 2 | == 3 | 4 | * **TE Connectivity Ltd.** 5 | * http://www.te.com 6 | -------------------------------------------------------------------------------- /te/im17ts.yaml: -------------------------------------------------------------------------------- 1 | name: IM17TS 2 | description: Signal Relay 3 | datasheet: http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F108-98001%7FW5%7Fpdf%7FEnglish%7FENG_SS_108-98001_W5.pdf%7F4-1462039-6 4 | keywords: Relay 5 | 6 | pinout: 7 | +: 1 8 | '-': 8 9 | A: 3 10 | AOUT: 11 | A0: 2 12 | A1: 4 13 | B: 6 14 | BOUT: 15 | B0: 7 16 | B1: 5 17 | 18 | schematic: 19 | symbol: IC 20 | left: +, A, B 21 | right: -, AOUT, BOUT 22 | 23 | housing: 24 | pattern: custom 25 | options: polarized 26 | bodyWidth: 5.92-6.08 27 | bodyLength: 9.92-10.08 28 | height: 5.45-5.85 29 | 30 | holeDiameter: 0.75 31 | padPosition: -2.54, -3.8, -2.54, -0.6, -2.54, 1.6, -2.54, 3.8, 2.54, 3.8, 2.54, 1.6, 2.54, -0.6, 2.54, -3.8 32 | -------------------------------------------------------------------------------- /ti/README.md: -------------------------------------------------------------------------------- 1 | TI 2 | == 3 | 4 | * **Texas Instruments Incorporated** 5 | * http://www.ti.com 6 | -------------------------------------------------------------------------------- /ti/ads7883.yaml: -------------------------------------------------------------------------------- 1 | name: ADS7883 2 | alias: ADS7883S, ADS7883SB 3 | description: 12-Bit, 3-MSPS, microPOWER, Miniature SAR Analog-to-Digital Converter 4 | datasheet: http://www.ti.com/lit/ds/symlink/ads7883.pdf 5 | keywords: IC, Analog, ADC 6 | 7 | pinout: 8 | VIN: 3 9 | SPI: 10 | ~CS: 6 11 | SCLK: 4 12 | SDO: 5 13 | VDD: 1 14 | GND: 2 15 | 16 | properties: 17 | in: VIN, ~CS, SCLK 18 | out: SDO 19 | power: VDD 20 | ground: GND 21 | inverted: ~CS 22 | 23 | schematic: 24 | symbol: IC 25 | left: VIN 26 | right: SPI 27 | top: VDD 28 | bottom: GND 29 | 30 | housing: 31 | outline: JEDEC MO-178 AB 32 | leadWidth: 0.25-0.5 33 | suffix: DBV 34 | 35 | padWidth: 1.05 36 | padHeight: 0.6 37 | padDistance: 2.7 38 | -------------------------------------------------------------------------------- /ti/ina139.yaml: -------------------------------------------------------------------------------- 1 | name: INA139 2 | description: High-Side Measurement Current Shunt Monitor 3 | datasheet: http://www.ti.com/lit/ds/symlink/ina139.pdf 4 | keywords: IC, Analog, OpAmp 5 | 6 | pinout: 7 | OUT: 1 8 | GND: 2 9 | VIN+: 3 10 | VIN-: 4 11 | V+: 5 12 | 13 | properties: 14 | power: V+ 15 | ground: GND 16 | in: VIN+, VIN- 17 | out: OUT 18 | 19 | schematic: 20 | symbol: IC 21 | left: VIN+, VIN- 22 | right: OUT 23 | top: V+ 24 | bottom: GND 25 | 26 | housing: 27 | outline: JEDEC MO-178 AA 28 | 29 | padWidth: 1 30 | padHeight: 0.55 31 | padDistance: 2.7 32 | -------------------------------------------------------------------------------- /ti/ina169.yaml: -------------------------------------------------------------------------------- 1 | base: INA139 2 | name: INA169 3 | datasheet: http://www.ti.com/lit/ds/symlink/ina169.pdf 4 | -------------------------------------------------------------------------------- /ti/iso721.yaml: -------------------------------------------------------------------------------- 1 | base: ISO72x 2 | name: ISO721 3 | variations: SOP8, SOIC8 4 | datasheet: http://www.ti.com/lit/ds/symlink/iso721.pdf 5 | 6 | pinout: 7 | Vcc1: 1, 3 8 | IN: 2 9 | GND1: 4 10 | OUT: 6 11 | Vcc2: 8 12 | GND2: 5, 7 13 | 14 | housing@SOP8: 15 | pattern: SOP 16 | bodyLength: 9.45-9.55 17 | bodyWidth: 6.52-6.62 18 | height: 4.85 19 | leadCount: 8 20 | leadLength: 1.15-1.45 21 | leadSpan: 10.10-10.70 22 | leadWidth: 0.355-0.555 23 | pitch: 2.54 24 | suffix: DUB 25 | -------------------------------------------------------------------------------- /ti/iso722.yaml: -------------------------------------------------------------------------------- 1 | base: ISO72x 2 | name: ISO722 3 | variations: SOIC8 4 | datasheet: http://www.ti.com/lit/ds/symlink/iso722.pdf 5 | 6 | pinout: 7 | Vcc1: 1, 3 8 | IN: 2 9 | GND1: 4 10 | OUT: 6 11 | ~EN: 7 12 | Vcc2: 8 13 | GND2: 5 14 | -------------------------------------------------------------------------------- /ti/iso7220.yaml: -------------------------------------------------------------------------------- 1 | base: ISO722x 2 | name: ISO7220A 3 | alias: ISO7220AQ, ISO7220B, ISO7220C, ISO7220M 4 | 5 | pinout: 6 | LEFT: 7 | INA: 2 8 | INB: 3 9 | VCC1: 1 10 | GND1: 4 11 | RIGHT: 12 | OUTA: 7 13 | OUTB: 6 14 | VCC2: 8 15 | GND2: 5 16 | -------------------------------------------------------------------------------- /ti/iso7221.yaml: -------------------------------------------------------------------------------- 1 | base: ISO722x 2 | name: ISO7221A 3 | alias: ISO7221AQ, ISO7221B, ISO7221C, ISO7221CQ, ISO7221M 4 | 5 | pinout: 6 | LEFT: 7 | OUTA: 2 8 | INB: 3 9 | VCC1: 1 10 | GND1: 4 11 | RIGHT: 12 | INA: 7 13 | OUTB: 6 14 | VCC2: 8 15 | GND2: 5 16 | -------------------------------------------------------------------------------- /ti/iso722x.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: Dual Digital Isolator 3 | datasheet: http://www.ti.com/lit/ds/symlink/iso7220a.pdf 4 | keywords: IC, Digital, Isolator 5 | 6 | properties: 7 | in: INA, INB 8 | out: OUTA, OUTB 9 | power: VCC1-2 10 | ground: GND1-2 11 | 12 | schematic: 13 | symbol: IC 14 | left: VCC1, LEFT, GND1 15 | right: VCC2, RIGHT, GND2 16 | 17 | housing: 18 | outline: JEDEC MS-012 AA 19 | suffix: D 20 | 21 | padWidth: 1.55 22 | padHeight: 0.6 23 | padDistance: 5.4 24 | -------------------------------------------------------------------------------- /ti/iso7230.yaml: -------------------------------------------------------------------------------- 1 | base: ISO723x 2 | name: ISO7230C 3 | alias: ISO7230M 4 | 5 | pinout: 6 | LEFT: 7 | INA: 3 8 | INB: 4 9 | INC: 5 10 | NC: 6 11 | VCC1: 1 12 | GND1: 2, 8 13 | RIGHT: 14 | OUTA: 14 15 | OUTB: 13 16 | OUTC: 12 17 | NC: 11 18 | EN: 10 19 | VCC2: 16 20 | GND2: 9, 15 21 | LNC: 22 | NC: 7 23 | -------------------------------------------------------------------------------- /ti/iso7231.yaml: -------------------------------------------------------------------------------- 1 | base: ISO723x 2 | name: ISO7231C 3 | alias: ISO7231M 4 | 5 | pinout: 6 | LEFT: 7 | INA: 3 8 | INB: 4 9 | OUTC: 5 10 | NC: 6 11 | EN1: 7 12 | VCC1: 1 13 | GND1: 2, 8 14 | RIGHT: 15 | OUTA: 14 16 | OUTB: 13 17 | INC: 12 18 | NC: 11 19 | EN2: 10 20 | VCC2: 16 21 | GND2: 9, 15 22 | -------------------------------------------------------------------------------- /ti/iso723x.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: High-Speed, Triple-Channel Digital Isolator 3 | datasheet: http://www.ti.com/lit/ds/symlink/iso7230c.pdf 4 | keywords: IC, Digital, Isolator 5 | 6 | properties: 7 | in: INA, INB, INC, EN, EN1-2 8 | out: OUTA, OUTB, OUTC 9 | power: VCC1-2 10 | ground: GND1-2 11 | nc: NC 12 | 13 | schematic: 14 | symbol: IC 15 | left: VCC1, LEFT, LNC, EN1, GND1 16 | right: VCC2, RIGHT, EN, EN2, GND2 17 | 18 | housing: 19 | outline: JEDEC MS-013 AA 20 | suffix: DW 21 | 22 | padWidth: 2 23 | padHeight: 0.6 24 | padDistance: 9.3 25 | -------------------------------------------------------------------------------- /ti/iso72x.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: Single Channel High-Speed Digital Isolator 3 | keywords: IC, Digital, Isolator 4 | 5 | properties: 6 | in: IN, ~EN 7 | out: OUT 8 | power: Vcc1, Vcc2 9 | ground: GND1, GND2 10 | inverted: ~EN 11 | 12 | groups: 13 | DATA1: IN 14 | DATA2: OUT, ~EN 15 | POWER1: Vcc1, GND1 16 | POWER2: Vcc2, GND2 17 | 18 | schematic: 19 | symbol: IC 20 | left: DATA1, POWER1 21 | right: DATA2, POWER2 22 | 23 | housing@SOIC8: 24 | suffix: D, MD 25 | outline: JEDEC MS-012 AA 26 | -------------------------------------------------------------------------------- /ti/iso7640.yaml: -------------------------------------------------------------------------------- 1 | base: ISO764x 2 | name: ISO7640FM 3 | 4 | pinout: 5 | LEFT: 6 | INA: 3 7 | INB: 4 8 | INC: 5 9 | IND: 6 10 | VCC1: 1 11 | GND1: 2, 8 12 | RIGHT: 13 | OUTA: 14 14 | OUTB: 13 15 | OUTC: 12 16 | OUTD: 11 17 | EN: 10 18 | VCC2: 16 19 | GND2: 9, 15 20 | NC: 7 21 | -------------------------------------------------------------------------------- /ti/iso7641.yaml: -------------------------------------------------------------------------------- 1 | base: ISO764x 2 | name: ISO7641FM 3 | 4 | pinout: 5 | LEFT: 6 | INA: 3 7 | INB: 4 8 | INC: 5 9 | OUTD: 6 10 | EN1: 7 11 | VCC1: 1 12 | GND1: 2, 8 13 | RIGHT: 14 | OUTA: 14 15 | OUTB: 13 16 | OUTC: 12 17 | IND: 11 18 | EN2: 10 19 | VCC2: 16 20 | GND2: 9, 15 21 | -------------------------------------------------------------------------------- /ti/iso764x.yaml: -------------------------------------------------------------------------------- 1 | abstract: true 2 | description: Low-Power Quad-Channel Digital Isolator 3 | datasheet: http://www.ti.com/lit/ds/symlink/iso7640fm.pdf 4 | keywords: IC, Digital, Isolator 5 | 6 | properties: 7 | in: INA, INB, INC, IND, EN, EN1-2 8 | out: OUTA, OUTB, OUTC, OUTD 9 | power: VCC1-2 10 | ground: GND1-2 11 | nc: NC 12 | 13 | schematic: 14 | symbol: IC 15 | left: VCC1, LEFT, NC, EN1, GND1 16 | right: VCC2, RIGHT, EN, EN2, GND2 17 | 18 | housing: 19 | outline: JEDEC MS-013 AA 20 | suffix: DW 21 | -------------------------------------------------------------------------------- /ti/lm1117mpx.yaml: -------------------------------------------------------------------------------- 1 | name: LM1117MPX 2 | alias: LM1117IMPX 3 | suffix: -ADJ, -1.8, -2.5, -3.3, -5.0 4 | description: 800-mA Low-Dropout Linear Regulator 5 | datasheet: http://www.ti.com/lit/ds/symlink/lm1117.pdf 6 | keywords: IC, Analog, LDO, Regulator 7 | 8 | pinout: 9 | VIN: 3 10 | VOUT: 2, 4 11 | GND: 1 12 | 13 | properties: 14 | in: VIN 15 | out: VOUT 16 | power: VIN, VOUT 17 | ground: GND 18 | 19 | schematic: 20 | symbol: IC 21 | left: VIN 22 | right: VOUT 23 | bottom: GND 24 | 25 | housing: 26 | outline: JEDEC TO-261 AA 27 | 28 | padWidth1: 2.15 29 | padHeight1: 0.95 30 | padWidth2: 2.15 31 | padHeight2: 3.25 32 | padDistance: 5.8 33 | -------------------------------------------------------------------------------- /ti/lm258.yaml: -------------------------------------------------------------------------------- 1 | base: LM158 2 | name: LM258 3 | alias: LM258A 4 | -------------------------------------------------------------------------------- /ti/lm2596.yaml: -------------------------------------------------------------------------------- 1 | name: LM2596 2 | variations: TO-263 3 | description: Step-Down Voltage Regulator 4 | datasheet: http://www.ti.com/lit/ds/symlink/lm2596.pdf 5 | keywords: IC, Analog, Step-down, Regulator 6 | 7 | pinout: 8 | VIN: 1 9 | OUT: 2 10 | GND: 3, 6 11 | FB: 4 12 | ~ON~/OFF: 5 13 | 14 | properties: 15 | power: VIN, OUT 16 | ground: GND 17 | in: VIN, ~ON~/OFF 18 | out: FB 19 | 20 | schematic: 21 | symbol: IC 22 | left: VIN, ~ON~/OFF 23 | right: OUT, FB 24 | bottom: GND 25 | 26 | housing@TO-263: 27 | suffix: S 28 | pattern: PAK 29 | pitch: 1.7 30 | bodyWidth: 8.39-8.89 31 | bodyLength: 10.04-10.41 32 | height: 4.65 33 | leadCount: 5 34 | leadWidth: 0.71-0.97 35 | leadLength: 1.98-1.98 36 | leadSpan: 14.35-14.35 37 | tabWidth: 10.04-10.41 38 | tabLength: 6.35 39 | tabLedge: 1.27 40 | -------------------------------------------------------------------------------- /ti/lm2672.yaml: -------------------------------------------------------------------------------- 1 | name: LM2672 2 | variations: SOIC 3 | description: Power Converter High Efficiency 1-A Step-Down Voltage Regulator with Features 4 | datasheet: http://www.ti.com/lit/ds/symlink/lm2672.pdf 5 | keywords: IC, Analog, DC-DC 6 | 7 | pinout: 8 | CB: 1 9 | SS: 2 10 | SYNC: 3 11 | FB: 4 12 | ON/~OFF: 5 13 | GND: 6 14 | VIN: 7 15 | VSW: 8 16 | 17 | properties: 18 | in: VIN, ON/~OFF, SYNC, FB, SS, CB 19 | out: VSW 20 | power: VIN 21 | ground: GND 22 | 23 | schematic: 24 | symbol: IC 25 | left: VIN, ON/~OFF, SYNC, SS 26 | right: CB, VSW, FB 27 | bottom: GND 28 | 29 | housing@SOIC: 30 | suffix: M-12, M-3.3, M-5.0, M-ADJ 31 | outline: JEDEC MS-012 AA 32 | -------------------------------------------------------------------------------- /ti/lm27313.yaml: -------------------------------------------------------------------------------- 1 | name: LM27313X 2 | alias: LM27313XQ 3 | description: 1.6-MHz Boost Converter With 30-V Internal FET Switch 4 | datasheet: http://www.ti.com/lit/ds/symlink/lm27313.pdf 5 | keywords: IC, Analog, DC-DC 6 | 7 | pinout: 8 | SW: 1 9 | GND: 2 10 | FB: 3 11 | ~SHDN: 4 12 | VIN: 5 13 | 14 | properties: 15 | in: FB, ~SHDN 16 | passive: SW 17 | power: VIN 18 | ground: GND 19 | inverted: ~SHDN 20 | 21 | schematic: 22 | symbol: IC 23 | left: VIN, ~SHDN 24 | right: SW, FB 25 | bottom: GND 26 | 27 | housing: 28 | suffix: MF 29 | outline: JEDEC MO-178 AA 30 | 31 | padWidth: 1 32 | padHeight: 0.55 33 | padDistance: 2.7 34 | -------------------------------------------------------------------------------- /ti/lm2940.yaml: -------------------------------------------------------------------------------- 1 | name: LM2940 2 | variations: SOT223 3 | suffix: -5.0, -8.0, -9.0, -10, -12, -15 4 | description: 1-A Low Dropout Regulator 5 | datasheet: http://www.ti.com/lit/ds/symlink/lm2940-n.pdf 6 | keywords: IC, analog, LDO, regulator 7 | 8 | pinout: 9 | IN: 1 10 | OUT: 3 11 | GND: 2, 4 12 | 13 | properties: 14 | power: IN, OUT 15 | ground: GND 16 | in: IN 17 | out: OUT 18 | 19 | schematic: 20 | symbol: IC 21 | left: IN 22 | right: OUT 23 | bottom: GND 24 | 25 | housing@SOT223: 26 | suffix: IMP 27 | outline: JEDEC TO-261 AA 28 | -------------------------------------------------------------------------------- /ti/lm311.yaml: -------------------------------------------------------------------------------- 1 | name: LM311 2 | variations: SOIC, TSSOP 3 | description: Quad Differential Comparator 4 | datasheet: http://www.ti.com/lit/ds/symlink/lm311.pdf 5 | keywords: IC, Analog, Comparator 6 | 7 | pinout: 8 | IN: 9 | -IN: 3 10 | +IN: 2 11 | OUT: 12 | COL_OUT: 7 13 | EMIT_OUT: 1 14 | BAL: 15 | BALANCE: 5 16 | BAL/STRB: 6 17 | VCC+: 8 18 | VCC-: 4 19 | 20 | properties: 21 | in: -IN, +IN, BALANCE, BAL/STRB 22 | out: COL_OUT, EMIT_OUT 23 | power: VCC+, VCC- 24 | inverted: -IN 25 | 26 | schematic: 27 | symbol: IC 28 | left: IN, BAL 29 | right: OUT 30 | top: VCC+ 31 | bottom: VCC- 32 | 33 | housing@SOIC: 34 | outline: JEDEC MS-012 AA 35 | suffix: D 36 | 37 | housing@TSSOP: 38 | outline: JEDEC MO-153 AB 39 | suffix: PW 40 | -------------------------------------------------------------------------------- /ti/lm358.yaml: -------------------------------------------------------------------------------- 1 | base: LM158 2 | name: LM358 3 | alias: LM358A 4 | -------------------------------------------------------------------------------- /ti/lm5050-2.yaml: -------------------------------------------------------------------------------- 1 | name: LM5050-2 2 | description: High Side OR-ing FET Controller 3 | datasheet: http://www.ti.com/lit/ds/symlink/lm5050-2.pdf 4 | keywords: IC, Analog, Controller 5 | 6 | pinout: 7 | nFGD: 1 8 | GND: 2 9 | OFF: 3 10 | IN: 4 11 | GATE: 5 12 | OUT: 6 13 | 14 | properties: 15 | ground: GND 16 | in: IN, OFF 17 | out: OUT, GATE, nFGD 18 | 19 | schematic: 20 | symbol: IC 21 | left: OFF, nFGD 22 | right: OUT, GATE, IN 23 | bottom: GND 24 | 25 | housing: 26 | outline: JEDEC MO-193 AA 27 | -------------------------------------------------------------------------------- /ti/lm5069.yaml: -------------------------------------------------------------------------------- 1 | name: LM5069 2 | description: Positive High-Voltage Hot Swap and In-Rush Current Controller With Power Limiting 3 | datasheet: http://www.ti.com/lit/ds/symlink/lm5069.pdf 4 | keywords: IC, Analog, Controller 5 | 6 | pinout: 7 | SENSE: 1 8 | VIN: 2 9 | UVLO: 3 10 | OVLO: 4 11 | GND: 5 12 | TIMER: 6 13 | PWR: 7 14 | PGD: 8 15 | OUT: 9 16 | GATE: 10 17 | 18 | properties: 19 | in: SENSE, VIN, UVLO, OVLO, PWR, OUT 20 | out: PGD, GATE 21 | passive: TIMER 22 | power: VIN 23 | ground: GND 24 | 25 | schematic: 26 | symbol: IC 27 | left: SENSE, VIN, UVLO, OVLO 28 | right: GATE, OUT, PGD 29 | bottom: GND, PWR, TIMER 30 | 31 | housing: 32 | outline: JEDEC MO-187 BA 33 | suffix: MM-1, MM-2 34 | -------------------------------------------------------------------------------- /ti/lmv321.yaml: -------------------------------------------------------------------------------- 1 | name: LMV321 2 | variations: SOT-23, SC-70 3 | alias: LMV321Q1, LMV321Q3 4 | suffix: /NOPB 5 | description: General Purpose, Low-Voltage, Rail-to-Rail Output Operational Amplifier 6 | datasheet: http://www.ti.com/lit/ds/symlink/lmv321.pdf 7 | keywords: IC, Analog, OpAmp 8 | 9 | pinout: 10 | IN: 11 | -IN: 3 12 | +IN: 1 13 | OUT: 4 14 | V+: 5 15 | V-: 2 16 | 17 | properties: 18 | in: +IN, -IN 19 | out: OUT 20 | power: V+, V- 21 | inverted: -IN 22 | 23 | schematic: 24 | symbol: IC 25 | left: IN 26 | right: OUT 27 | top: V+ 28 | bottom: V- 29 | 30 | housing@SOT-23: 31 | outline: JEDEC MO-178 AA 32 | suffix: M5, M5X 33 | 34 | padWidth: 1.05 35 | padHeight: 0.6 36 | padDistance: 2.7 37 | 38 | housing@SC-70: 39 | outline: JEDEC MO-203 AA 40 | suffix: M7, M7X 41 | 42 | padWidth: 0.9 43 | padHeight: 0.4 44 | padDistance: 2.2 45 | -------------------------------------------------------------------------------- /ti/ref02.yaml: -------------------------------------------------------------------------------- 1 | name: REF02 2 | variations: PDIP, SOIC 3 | alias: REF02A, REF02B 4 | description: +5V Precision Voltage Reference 5 | datasheet: http://www.ti.com/lit/ds/symlink/ref02.pdf 6 | keywords: IC, Analog, Reference 7 | 8 | pinout: 9 | VIN: 2 10 | Temp: 3 11 | VOUT: 6 12 | Trim: 5 13 | GND: 4 14 | NC: 1, 7, 8 15 | 16 | properties: 17 | in: VIN 18 | out: VOUT, Temp 19 | passive: Trim 20 | power: VIN, VOUT 21 | ground: GND 22 | nc: NC 23 | 24 | schematic: 25 | symbol: IC 26 | left: VIN, NC 27 | right: VOUT, Trim, Temp 28 | bottom: GND 29 | 30 | housing@PDIP: 31 | suffix: P 32 | outline: JEDEC MS-001 BA 33 | 34 | housing@SOIC: 35 | suffix: U 36 | outline: JEDEC MS-012 AA 37 | 38 | padWidth: 1.55 39 | padHeight: 0.6 40 | padDistance: 5.4 41 | -------------------------------------------------------------------------------- /ti/sn65hvd234.yaml: -------------------------------------------------------------------------------- 1 | name: SN65HVD234 2 | description: 3.3-V CAN Bus Transceiver 3 | datasheet: http://www.ti.com/lit/ds/symlink/sn65hvd234.pdf 4 | keywords: IC, Digital, Transceiver 5 | 6 | pinout: 7 | RXTX: 8 | D: 1 9 | R: 4 10 | RS: 8 11 | EN: 5 12 | PHY: 13 | CANH: 7 14 | CANL: 6 15 | VCC: 3 16 | GND: 2 17 | 18 | properties: 19 | in: D, EN 20 | out: R 21 | bidir: CANH, CANL 22 | passive: RS 23 | power: VCC 24 | ground: GND 25 | 26 | schematic: 27 | symbol: IC 28 | left: RXTX, EN 29 | right: PHY, RS 30 | top: VCC 31 | bottom: GND 32 | 33 | housing: 34 | suffix: D 35 | outline: JEDEC MS-012 AA 36 | -------------------------------------------------------------------------------- /ti/sn74lvc2t45-q1.yaml: -------------------------------------------------------------------------------- 1 | name: SN74LVC2T45Q 2 | description: Dual-bit Dual-supply Bus Transceiver with Configurable Voltage Translation and 3-state Outputs 3 | datasheet: http://www.ti.com/lit/ds/symlink/sn74lvc2t45-q1.pdf 4 | keywords: IC, Digital, Transceiver 5 | 6 | pinout: 7 | A: 8 | A1: 2 9 | A2: 3 10 | B: 11 | B1: 7 12 | B2: 6 13 | DIR: 5 14 | VCCA: 1 15 | VCCB: 8 16 | GND: 4 17 | 18 | properties: 19 | bidir: A1-2, B1-2 20 | in: DIR 21 | power: VCCA, VCCB 22 | ground: GND 23 | 24 | schematic: 25 | symbol: IC 26 | left: VCCA, A, DIR 27 | right: VCCB, B 28 | bottom: GND 29 | 30 | housing: 31 | suffix: DCU 32 | outline: JEDEC MO-187 CA 33 | 34 | padWidth: 0.8 35 | padHeight: 0.3 36 | padDistance: 3.1 37 | -------------------------------------------------------------------------------- /ti/tca6507.yaml: -------------------------------------------------------------------------------- 1 | name: TCA6507 2 | variations: TSSOP 3 | description: Low-Voltage 7-Bit I2C and SMBus LED Driver With Intensity Control and Shutdown 4 | datasheet: http://www.ti.com/lit/ds/symlink/tca6507.pdf 5 | keywords: IC, Digital, Driver 6 | 7 | pinout@TSSOP: 8 | LED: 9 | P0-6: 8-14 10 | 11 | EN: 4 12 | 13 | I2C: 14 | SCL: 2 15 | SDA: 3 16 | 17 | VCC: 1 18 | GND: 5 19 | NC: 6, 7 20 | 21 | properties: 22 | in: EN, SCL 23 | out: LED 24 | bidir: SDA 25 | power: VCC 26 | ground: GND 27 | nc: NC 28 | 29 | schematic: 30 | symbol: IC 31 | left: EN, I2C, NC 32 | right: LED 33 | top: VCC 34 | bottom: GND 35 | 36 | housing@TSSOP: 37 | outline: JEDEC MO-153 AB-1 38 | suffix: PW 39 | 40 | padWidth: 1.6 41 | padHeight: 0.35 42 | padDistance: 5.6 43 | -------------------------------------------------------------------------------- /ti/tl431.yaml: -------------------------------------------------------------------------------- 1 | name: TL431AC 2 | alias: TL431AI, TL431BC, TL431BI, TL431BQ, TL431C, TL431I, TL431Q 3 | description: Precision Programmable Reference 4 | datasheet: http://www.ti.com/lit/ds/symlink/tl431.pdf 5 | keywords: IC, Analog, Reference 6 | 7 | pinout: 8 | ANODE: 2, 3, 6, 7 9 | CATHODE: 1 10 | REF: 8 11 | NC: 4, 5 12 | 13 | properties: 14 | passive: ANODE, CATHODE 15 | nc: NC 16 | 17 | schematic: 18 | symbol: IC 19 | top: CATHODE 20 | left: REF 21 | right: NC 22 | bottom: ANODE 23 | 24 | housing: 25 | suffix: D 26 | outline: JEDEC MS-012 AA 27 | 28 | padWidth: 1.55 29 | padHeight: 0.6 30 | padDistance: 5.4 31 | -------------------------------------------------------------------------------- /ti/tlv1117.yaml: -------------------------------------------------------------------------------- 1 | name: TLV1117 2 | variations: SOT-223 3 | description: Single Output LDO, 800mA, Fixed and Adj., Internal Current Limit, Thermal Overload Protection 4 | datasheet: http://www.ti.com/lit/ds/symlink/tlv1117.pdf 5 | keywords: IC, Analog, LDO, Regulator 6 | 7 | pinout: 8 | INPUT: 3 9 | OUTPUT: 2, 4 10 | GND: 1 11 | 12 | properties: 13 | in: INPUT 14 | out: OUTPUT 15 | power: INPUT, OUTPUT 16 | ground: GND 17 | 18 | schematic: 19 | symbol: IC 20 | left: INPUT 21 | right: OUTPUT 22 | bottom: GND 23 | 24 | housing@SOT-223: 25 | outline: JEDEC TO-261 AA 26 | suffix: -15CDCY, -15IDCY, -18CDCY, -18IDCY, -25CDCY, -25IDCY, -33CDCY, -33IDCY, -50CDCY, -50IDCY, CDCY, IDCY 27 | 28 | padWidth1: 2.15 29 | padHeight1: 0.95 30 | padWidth2: 2.15 31 | padHeight2: 3.25 32 | padDistance: 5.8 33 | -------------------------------------------------------------------------------- /ti/tlv710.yaml: -------------------------------------------------------------------------------- 1 | name: TLV710 2 | suffix: 1828, 3318 3 | description: Dual, 200mA, Low-Iq Low-Dropout Regulator for Portable Devices 4 | datasheet: http://www.ti.com/lit/ds/symlink/tlv7101828.pdf 5 | keywords: IC, Analog, LDO 6 | 7 | pinout: 8 | EN1: 1 9 | IN: 2 10 | EN2: 3 11 | GND: 4 12 | OUT2: 5 13 | OUT1: 6 14 | 15 | properties: 16 | in: IN, EN1-2 17 | out: OUT1-2 18 | power: IN, OUT1-2 19 | ground: GND 20 | 21 | schematic: 22 | symbol: IC 23 | left: IN, EN1-2 24 | right: OUT1-2 25 | bottom: GND 26 | 27 | housing: 28 | pattern: SON 29 | bodyWidth: 1.45-1.55 30 | bodyLength: 1.45-1.55 31 | height: 0.7-0.8 32 | leadWidth: 0.2-0.3 33 | leadLength: 0.4-0.6 34 | leadLength1: 0.5-0.7 35 | leadHeight: 0.2 36 | leadCount: 6 37 | pitch: 0.5 38 | 39 | padWidth: 0.75 40 | padWidth1: 0.85 41 | padHeight: 0.28 42 | padSpace: 0.4 43 | -------------------------------------------------------------------------------- /ti/tmp102.yaml: -------------------------------------------------------------------------------- 1 | name: TMP102AIDRL 2 | description: Low-Power Digital Temperature Sensor With SMBus and Two-Wire Serial Interface 3 | datasheet: http://www.ti.com/lit/ds/symlink/tmp102.pdf 4 | keywords: IC, Digital, Temperature, Sensor 5 | 6 | pinout: 7 | I2C: 8 | SCL: 1 9 | SDA: 6 10 | ALERT: 3 11 | ADD0: 4 12 | V+: 5 13 | GND: 2 14 | 15 | properties: 16 | in: SCL, ADD0 17 | out: ALERT 18 | bidir: SDA 19 | power: V+ 20 | ground: GND 21 | 22 | schematic: 23 | symbol: IC 24 | left: ADD0, ALERT 25 | right: I2C 26 | top: V+ 27 | bottom: GND 28 | 29 | housing: 30 | pattern: SOTFL 31 | bodyWidth: 1.1-1.3 32 | bodyLength: 1.5-1.7 33 | height: 0.5-0.6 34 | pitch: 0.5 35 | leadWidth: 0.15-0.25 36 | leadLength: 0.2-0.4 37 | leadSpan: 1.5-1.7 38 | leadCount: 6 39 | 40 | padWidth: 0.45 41 | padHeight: 0.3 42 | padSpace: 0.9 43 | -------------------------------------------------------------------------------- /ti/tms320f28379dptp.yaml: -------------------------------------------------------------------------------- 1 | base: TMS320F28374DPTP 2 | name: TMS320F28379DPTP 3 | -------------------------------------------------------------------------------- /ti/tpd4e001-q1.yaml: -------------------------------------------------------------------------------- 1 | name: TPD4E001Q 2 | description: 4-Channel ESD Protection Array With 1.5-pF I/O Capacitance 3 | datasheet: http://www.ti.com/lit/ds/symlink/tpd4e001-q1.pdf 4 | keywords: IC, Analog, TVS, Protector 5 | 6 | pinout: 7 | IO: 8 | IO1-4: 1, 3, 4, 6 9 | VCC: 5 10 | GND: 2 11 | 12 | properties: 13 | passive: IO1-4 14 | power: VCC 15 | ground: GND 16 | 17 | schematic: 18 | symbol: IC 19 | left: VCC, GND 20 | right: IO 21 | 22 | housing: 23 | suffix: DBV 24 | outline: JEDEC MO-178 AB 25 | leadWidth: 0.25-0.5 26 | 27 | padWidth: 1.05 28 | padHeight: 0.6 29 | padDistance: 2.7 30 | -------------------------------------------------------------------------------- /ti/tps2412.yaml: -------------------------------------------------------------------------------- 1 | name: TPS2412 2 | variations: TSSOP, SOIC 3 | description: N+1 and OR-ing Power Rail Controller 4 | datasheet: http://www.ti.com/lit/ds/symlink/tps2412.pdf 5 | keywords: IC, Analog, Driver 6 | 7 | pinout: 8 | VDD: 1 9 | RSET: 2 10 | RSVD: 3 11 | GND: 4 12 | GATE: 5 13 | C: 6 14 | A: 7 15 | BYP: 8 16 | 17 | properties: 18 | in: RSET, A, C 19 | out: GATE 20 | power: VDD 21 | ground: GND, RSVD 22 | 23 | schematic: 24 | symbol: IC 25 | left: RSET 26 | right: VDD, C, GATE, BYP, A 27 | bottom: GND, RSVD 28 | 29 | housing@TSSOP: 30 | suffix: PW 31 | outline: JEDEC MO-153 AA 32 | 33 | padWidth: 1.5 34 | padHeight: 0.45 35 | padDistance: 5.8 36 | 37 | housing@SOIC: 38 | suffix: D 39 | outline: JEDEC MS-012 AA 40 | 41 | padWidth: 1.55 42 | padHeight: 0.6 43 | padDistance: 5.4 44 | -------------------------------------------------------------------------------- /ti/tps3702.yaml: -------------------------------------------------------------------------------- 1 | name: TPS3702 2 | suffix: AX18, AX18Q, AX33, AX33Q, CX10, CX10Q, CX12, CX12Q, CX18, CX18Q, CX33, CX33Q, CX50, CX50Q 3 | description: High-Accuracy, Overvoltage and Undervoltage Monitor 4 | datasheet: http://www.ti.com/lit/ds/symlink/tps3702.pdf 5 | keywords: IC, Digital, Reset, Supervisor, Monitor 6 | 7 | pinout: 8 | SENSE: 3 9 | SET: 4 10 | UV: 1 11 | OV: 6 12 | VDD: 5 13 | GND: 2 14 | 15 | properties: 16 | in: SENSE, SET, VDD 17 | out: UV, OV 18 | power: VDD 19 | ground: GND 20 | 21 | schematic: 22 | symbol: IC 23 | left: SENSE, SET 24 | right: UV, OV 25 | top: VDD 26 | bottom: GND 27 | 28 | housing: 29 | outline: JEDEC MO-193 AA 30 | 31 | padWidth: 1.1 32 | padHeight: 0.6 33 | padDistance: 2.7 34 | -------------------------------------------------------------------------------- /ti/tps54560.yaml: -------------------------------------------------------------------------------- 1 | name: TPS54560 2 | description: 4.5 V to 60 V Input, 5 A, Step Down DC-DC Converter with Eco-mode 3 | datasheet: http://www.ti.com/lit/ds/symlink/tps54560.pdf 4 | keywords: IC, Analog, DC-DC 5 | 6 | pinout: 7 | VIN: 2 8 | EN: 3 9 | COMP: 6 10 | RT/CLK: 4 11 | BOOT: 1 12 | SW: 8 13 | FB: 5 14 | GND: 7 15 | PowerPAD: 9 16 | 17 | properties: 18 | in: VIN, EN, RT/CLK, FB, SW 19 | out: BOOT, COMP 20 | power: VIN 21 | ground: GND, PowerPAD 22 | 23 | schematic: 24 | symbol: IC 25 | left: VIN, EN, COMP, RT/CLK 26 | right: BOOT, SW, FB 27 | bottom: GND, PowerPAD 28 | 29 | housing: 30 | suffix: DDA 31 | outline: JEDEC MS-012 BA 32 | 33 | padWidth: 2.2 34 | padHeight: 0.5 35 | padDistance: 5.75 36 | tabWidth: 2.4 37 | tabLength: 3.1 38 | viaDiameter: 0.33 39 | viaPosition: -0.65, -1.3, 0.65, -1.3, -0.65, 0, 0.65, 0, -0.65, 1.3, 0.65, 1.3 40 | -------------------------------------------------------------------------------- /ti/tps723.yaml: -------------------------------------------------------------------------------- 1 | name: TPS72301 2 | variations: SOT, SOT-23 3 | alias: TPS72325 4 | description: 200mA Low-Noise, High-PSRR Negative Output Low-Dropout Linear Regulator 5 | datasheet: http://www.ti.com/lit/ds/symlink/tps723.pdf 6 | keywords: IC, Digital, LDO, Regulator 7 | 8 | pinout: 9 | IN: 2 10 | EN: 3 11 | OUT: 5 12 | NR/FB: 4 13 | GND: 1 14 | 15 | properties: 16 | in: IN, EN 17 | out: OUT 18 | power: IN, OUT 19 | ground: GND 20 | passive: NR/FB 21 | 22 | schematic: 23 | symbol: IC 24 | left: IN, EN 25 | right: OUT, NR/FB 26 | bottom: GND 27 | 28 | housing@SOT: 29 | suffix: DDC 30 | outline: JEDEC MO-193 AB 31 | 32 | padWidth: 1.1 33 | padHeight: 0.6 34 | padDistance: 2.7 35 | 36 | housing@SOT-23: 37 | suffix: DBV, QDBV 38 | outline: JEDEC MO-178 AA 39 | 40 | padWidth: 1.05 41 | padHeight: 0.6 42 | padDistance: 2.7 43 | -------------------------------------------------------------------------------- /ti/tps767.yaml: -------------------------------------------------------------------------------- 1 | name: TPS76701Q 2 | variations: SOIC 3 | alias: TPS76715Q, TPS76718Q, TPS76725Q, TPS76727Q, TPS76728Q, TPS76730Q, TPS76733Q, TPS76750Q 4 | description: Fast-Transient-Response 1-A Low-Dropout Linear Regulators 5 | datasheet: http://www.ti.com/lit/ds/symlink/tps767.pdf 6 | keywords: IC, Digital, LDO, Regulator 7 | 8 | pinout@SOIC: 9 | IN: 3, 4 10 | OUT: 5, 6 11 | ~EN: 2 12 | FB/NC: 7 13 | ~RESET: 8 14 | GND: 1 15 | 16 | properties: 17 | in: IN, ~EN 18 | out: OUT, ~RESET 19 | power: IN, OUT 20 | ground: GND 21 | passive: FB/NC 22 | inverted: ~EN, ~RESET 23 | 24 | schematic: 25 | symbol: IC 26 | left: IN, ~EN 27 | right: OUT, FB/NC, ~RESET 28 | bottom: GND 29 | 30 | housing@SOIC: 31 | suffix: D 32 | outline: JEDEC MS-012 AA 33 | 34 | padWidth: 1.55 35 | padHeight: 0.6 36 | padDistance: 5.4 37 | -------------------------------------------------------------------------------- /ti/ts3usb30e.yaml: -------------------------------------------------------------------------------- 1 | name: TS3USB30E 2 | variations: VSSOP 3 | description: ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable 4 | datasheet: http://www.ti.com/lit/ds/symlink/ts3usb30e.pdf 5 | keywords: IC, Analog, Multiplexer 6 | 7 | pinout@VSSOP: 8 | USB1: 9 | D1+: 2 10 | D1-: 8 11 | USB2: 12 | D2+: 3 13 | D2-: 7 14 | USB: 15 | D+: 4 16 | D-: 6 17 | 18 | ~OE: 9 19 | S: 1 20 | 21 | VCC: 10 22 | GND: 5 23 | 24 | properties: 25 | in: ~OE, S 26 | bidir: USB, USB1-2 27 | power: VCC 28 | ground: GND 29 | inverted: ~OE 30 | 31 | schematic: 32 | symbol: IC 33 | left: USB, S, ~OE 34 | right: USB1-2 35 | top: VCC 36 | bottom: GND 37 | 38 | housing@VSSOP: 39 | suffix: DGS 40 | outline: JEDEC MO-187 BA 41 | 42 | padWidth: 1.45 43 | padHeight: 0.3 44 | padDistance: 4.4 45 | -------------------------------------------------------------------------------- /ti/txs0108e.yaml: -------------------------------------------------------------------------------- 1 | name: TXS0108E 2 | variations: TSSOP 3 | description: 8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications 4 | datasheet: http://www.ti.com/lit/ds/symlink/txs0108e.pdf 5 | keywords: IC, Digital, Translator, Transceiver 6 | 7 | pinout@TSSOP: 8 | A: 9 | A1-8: 1, 3-9 10 | VCCA: 2 11 | 12 | B: 13 | B1-8: 20, 18-12 14 | VCCB: 19 15 | 16 | OE: 10 17 | 18 | GND: 11 19 | 20 | properties: 21 | power: VCCA, VCCB 22 | ground: GND 23 | in: OE 24 | bidir: A, B 25 | 26 | schematic: 27 | symbol: IC 28 | left: A, OE, VCCA 29 | right: B, VCCB 30 | bottom: GND 31 | 32 | housing@TSSOP: 33 | outline: JEDEC MO-153 AC 34 | suffix: PW 35 | 36 | padWidth: 1.6 37 | padHeight: 0.3 38 | padDistance: 5.6 39 | -------------------------------------------------------------------------------- /toshiba/README.md: -------------------------------------------------------------------------------- 1 | Toshiba 2 | ======= 3 | 4 | * **Toshiba Corporation** 5 | * http://toshiba.semicon-storage.com 6 | -------------------------------------------------------------------------------- /toshiba/tc7s14f.yaml: -------------------------------------------------------------------------------- 1 | name: TC7S14F 2 | description: Single Schmitt Inverter 3 | datasheet: https://toshiba.semicon-storage.com/info/docget.jsp?did=20193&prodName=TC7S14F 4 | keywords: IC, Digital, Inverter 5 | 6 | pinout: 7 | IN_A: 2 8 | OUT_Y: 4 9 | VCC: 5 10 | GND: 3 11 | NC: 1 12 | 13 | properties: 14 | in: IN_A 15 | out: OUT_Y 16 | power: VCC 17 | ground: GND 18 | nc: NC 19 | inverted: OUT_Y 20 | 21 | schematic: 22 | symbol: IC 23 | left: IN_A, NC 24 | right: OUT_Y 25 | top: VCC 26 | bottom: GND 27 | 28 | housing: 29 | pattern: SOT23 30 | bodyWidth: 1.5-1.8 31 | bodyLength: 2.7-3.1 32 | height: 1.1-1.4 33 | leadWidth: 0.3-0.5 34 | leadLength: 0.3-0.6 35 | leadSpan: 2.5-3 36 | leadCount: 5 37 | pitch: 0.95 38 | -------------------------------------------------------------------------------- /toshiba/tca62724fmg.yaml: -------------------------------------------------------------------------------- 1 | name: TCA62724FMG 2 | description: 3-Channel Constant-Current LED Driver 3 | datasheet: http://www.mouser.com/ds/2/408/21212-21811.pdf 4 | keywords: IC, Digital, Driver 5 | 6 | pinout: 7 | CONTROL: 8 | ~RESET: 4 9 | ~SHDN: 1 10 | 11 | I2C: 12 | SCL: 3 13 | SDA: 2 14 | 15 | OUT: 16 | OUT0-2: 9-7 17 | 18 | REXT: 6 19 | 20 | VIN: 10 21 | GND: 5 22 | 23 | properties: 24 | in: CONTROL, SCL 25 | out: OUT 26 | bidir: SDA 27 | power: VIN 28 | ground: GND 29 | passive: REXT 30 | inverted: ~RESET, ~SHDN 31 | 32 | schematic: 33 | symbol: IC 34 | left: CONTROL, I2C 35 | right: OUT, REXT 36 | top: VIN 37 | bottom: GND 38 | 39 | housing: 40 | pattern: SOPFL 41 | bodyWidth: 2.7-2.9 42 | bodyLength: 2.8-3 43 | height: 0.75-0.9 44 | pitch: 0.5 45 | leadWidth: 0.2-0.35 46 | leadLength: 0.1-0.3 47 | leadHeight: 0.12-0.13 48 | leadSpan: 2.9-3.1 49 | leadCount: 10 50 | -------------------------------------------------------------------------------- /toshiba/tlp160g.yaml: -------------------------------------------------------------------------------- 1 | name: TLP160G 2 | description: Photocoupler, Phototriac Output 3 | datasheet: https://toshiba.semicon-storage.com/info/docget.jsp?did=16916&prodName=TLP160G 4 | keywords: IC, Analog, Optocoupler 5 | 6 | pinout: 7 | ANODE: 1 8 | CATHODE: 3 9 | TERMINAL1: 4 10 | TERMINAL2: 6 11 | 12 | properties: 13 | passive: ANODE, CATHODE, TERMINAL1-2 14 | 15 | schematic: 16 | symbol: IC 17 | left: ANODE, CATHODE 18 | right: TERMINAL1-2 19 | 20 | housing: 21 | pattern: SOP 22 | bodyWidth: 4.4 23 | bodyLength: 3.4-3.8 24 | height: 2.4-2.8 25 | leadWidth: 0.4 26 | leadLength: 0.5 27 | leadSpan: 6.6-7.4 28 | leadCount: 6 29 | pitch: 1.27 30 | -------------------------------------------------------------------------------- /txc/7m.yaml: -------------------------------------------------------------------------------- 1 | name: 7M 2 | description: SMD Seam Sealing Crystal, 3.2x2.5x0.7 mm 3 | datasheet: http://txccrystal.com/images/pdf/7m.pdf 4 | keywords: Crystal 5 | 6 | pinout: 7 | X1: 1 8 | X2: 3 9 | CASE: 2, 4 10 | 11 | properties: 12 | passive: X1-2, CASE 13 | 14 | schematic: 15 | symbol: crystal 16 | left: X1 17 | right: X2 18 | bottom: CASE 19 | 20 | housing: 21 | pattern: oscillator 22 | options: corner-concave 23 | bodyWidth: 2.4-2.6 24 | bodyLength: 3.1-3.3 25 | height: 0.6-0.8 26 | leadWidth: 0.9 27 | leadLength: 1 28 | rowSpan: 2.3 29 | columnSpan: 3 30 | 31 | padWidth: 1.2 32 | padHeight: 1.4 33 | padSpace1: 0.5 34 | padSpace2: 0.8 35 | -------------------------------------------------------------------------------- /txc/README.md: -------------------------------------------------------------------------------- 1 | TXC 2 | === 3 | 4 | * **TXC Corporation** 5 | * http://txccrystal.com 6 | -------------------------------------------------------------------------------- /vicor/28c.yaml: -------------------------------------------------------------------------------- 1 | name: 28C 2 | description: Micro Family 28 V Wide Input DC-DC Converter Module 3 | datasheet: http://cdn.vicorpower.com/documents/datasheets/ds_28vin-micro-family.pdf 4 | keywords: IC, Analog, DC-DC 5 | 6 | pinout: 7 | IN: 8 | +IN: 1 9 | -IN: 4 10 | PC: 2 11 | PR: 3 12 | 13 | OUT: 14 | +OUT: 7 15 | -OUT: 5 16 | SC: 6 17 | 18 | properties: 19 | in: +IN, -IN 20 | out: +OUT, -OUT 21 | power: +IN, -IN, +OUT, -OUT 22 | passive: PC, PR, SC 23 | 24 | schematic: 25 | symbol: IC 26 | left: IN, PC, PR 27 | right: OUT, SC 28 | 29 | housing: 30 | pattern: custom 31 | options: polarized 32 | bodyWidth: 57.91 33 | bodyLength: 36.83 34 | height: 12.2-13.2 35 | 36 | holeDiameter: 2.4 37 | padPosition: -25.4, -10.16, -25.4, -3.17, -25.4, 3.17, -25.4, 10.16, 25.4, 10.16, 25.4, 0, 25.4, -10.16 38 | -------------------------------------------------------------------------------- /vicor/README.md: -------------------------------------------------------------------------------- 1 | VICOR 2 | ===== 3 | 4 | * **Vicor Corporation** 5 | * http://www.vicorpower.com 6 | -------------------------------------------------------------------------------- /vishay/README.md: -------------------------------------------------------------------------------- 1 | VISHAY 2 | ====== 3 | 4 | * **Vishay Intertechnology** 5 | * http://www.vishay.com 6 | -------------------------------------------------------------------------------- /vishay/bat42w.yaml: -------------------------------------------------------------------------------- 1 | name: BAT42W 2 | description: Small Signal Schottky Diode 3 | datasheet: http://www.vishay.com/docs/85661/bat42w.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | pattern: SOD 12 | options: polarized 13 | bodyWidth: 1.4-1.7 14 | bodyLength: 2.55-2.85 15 | height: 1-1.35 16 | leadWidth: 0.45-0.65 17 | leadLength: 0.25-0.45 18 | leadSpan: 3.55-3.85 19 | 20 | padWidth: 0.85 21 | padHeight: 0.85 22 | padSpace: 2.5 23 | -------------------------------------------------------------------------------- /vishay/crcw2512.yaml: -------------------------------------------------------------------------------- 1 | name: CRCW2512 2 | description: Standard Thick Film Chip Resistor 3 | datasheet: http://www.vishay.com/docs/20035/dcrcwe3.pdf 4 | keywords: Resistor, 1W 5 | 6 | schematic: 7 | symbol: resistor 8 | 9 | housing: 10 | pattern: chip 11 | bodyLength: 6.1-6.5 12 | bodyWidth: 3-3.3 13 | height: 0.5-0.7 14 | leadLength: 0.4-0.8 15 | 16 | padWidth: 1 17 | padHeight: 3.2 18 | padSpace: 5.2 19 | -------------------------------------------------------------------------------- /vishay/smbj.yaml: -------------------------------------------------------------------------------- 1 | name: SMBJ 2 | description: Surface Mount Transient Voltage Suppressor 3 | datasheet: http://www.vishay.com/docs/88392/smbj50a.pdf 4 | keywords: Diode, TVS 5 | 6 | schematic: 7 | symbol: diode 8 | options: TVS 9 | 10 | housing: 11 | outline: JEDEC DO-214 AA 12 | options: polarized 13 | 14 | padWidth: 1.52 15 | padHeight: 2.18 16 | padSpan: 5.59 17 | -------------------------------------------------------------------------------- /vishay/vs-10bq030.yaml: -------------------------------------------------------------------------------- 1 | name: VS-10BQ030 2 | description: High Performance Schottky Rectifier, 1.0 A 3 | datasheet: http://www.vishay.com/docs/95738/vs-10bq030-m3.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AA 12 | options: polarized 13 | 14 | padWidth: 1.52 15 | padHeight: 2.18 16 | padSpan: 5.59 17 | -------------------------------------------------------------------------------- /vishay/vs-30bq100.yaml: -------------------------------------------------------------------------------- 1 | name: VS-30BQ100 2 | description: Schottky Rectifier, 3 A 3 | datasheet: http://www.vishay.com/docs/93360/30bq100m.pdf 4 | keywords: Diode, Schottky 5 | 6 | schematic: 7 | symbol: diode 8 | options: schottky 9 | 10 | housing: 11 | outline: JEDEC DO-214 AB 12 | options: polarized 13 | 14 | padWidth: 1.52 15 | padHeight: 3.2 16 | padSpan: 8.13 17 | -------------------------------------------------------------------------------- /vishay/vs-mbrb20.yaml: -------------------------------------------------------------------------------- 1 | name: VS-MBRB20 2 | suffix: 80CT, 90CT, 100CT 3 | description: Schottky Rectifier, 2 x 10 A 4 | datasheet: http://www.farnell.com/datasheets/1869920.pdf 5 | keywords: Diode, Schottky 6 | 7 | pinout: 8 | A1: 1 9 | A2: 3 10 | C: 4 11 | 12 | schematic: 13 | symbol: twin-diode 14 | options: schottky 15 | 16 | housing: 17 | outline: JEDEC TO-263 AB 18 | 19 | padWidth1: 3.81 20 | padHeight1: 2.32 21 | padWidth2: 9.65 22 | padHeight2: 11 23 | padSpan: 17.9 24 | -------------------------------------------------------------------------------- /vishay/wslp3921.yaml: -------------------------------------------------------------------------------- 1 | name: WSLP3921 2 | description: Power Metal Strip Resistor, Very High Power, Low Value, Surface Mount 3 | datasheet: http://www.vishay.com/docs/30176/wslp3921.pdf 4 | keywords: Resistor, 9W 5 | 6 | schematic: 7 | symbol: resistor 8 | 9 | housing: 10 | pattern: chip 11 | bodyLength: 9.746-10.254 12 | bodyWidth: 4.946-5.454 13 | height: 0.5 14 | bodyColor: silver 15 | leadLength: 1.746-2.254 16 | 17 | padWidth: 2.7 18 | padHeight: 6.2 19 | padSpace: 5.6 20 | -------------------------------------------------------------------------------- /wurth/74477020.yaml: -------------------------------------------------------------------------------- 1 | name: '74477020' 2 | description: WE-PD SMD Shielded Power Inductor, 100 uH 3 | datasheet: http://katalog.we-online.de/pbs/datasheet/74477020.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 11.7-12.3 12 | bodyLength: 11.7-12.3 13 | height: 8 14 | leadWidth: 4.8-5.2 15 | leadLength: 3.5-4.5 16 | 17 | padWidth: 2.9 18 | padHeight: 5.4 19 | padSpace: 7 20 | -------------------------------------------------------------------------------- /wurth/7447709470.yaml: -------------------------------------------------------------------------------- 1 | name: '7447709470' 2 | description: WE-PD SMD Shielded Power Inductor, 47 uH 3 | datasheet: http://katalog.we-online.de/pbs/datasheet/7447709470.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 11.5-12.5 12 | bodyLength: 11.5-12.5 13 | height: 10 14 | leadWidth: 4.8-5.2 15 | leadLength: 3.5-4.5 16 | 17 | padWidth: 2.9 18 | padHeight: 5.4 19 | padSpace: 7 20 | -------------------------------------------------------------------------------- /wurth/7447709680.yaml: -------------------------------------------------------------------------------- 1 | name: '7447709680' 2 | description: WE-PD SMD Shielded Power Inductor, 68 uH 3 | datasheet: http://katalog.we-online.de/pbs/datasheet/7447709680.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 11.5-12.5 12 | bodyLength: 11.5-12.5 13 | height: 10 14 | leadWidth: 4.8-5.2 15 | leadLength: 3.5-4.5 16 | 17 | padWidth: 2.9 18 | padHeight: 5.4 19 | padSpace: 7 20 | -------------------------------------------------------------------------------- /wurth/744771147.yaml: -------------------------------------------------------------------------------- 1 | name: '744771147' 2 | description: WE-PD SMD Shielded Power Inductor, 47 uH 3 | datasheet: http://katalog.we-online.de/pbs/datasheet/744771147.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 11.7-12.3 12 | bodyLength: 11.7-12.3 13 | height: 6 14 | leadWidth: 4.8-5.2 15 | leadLength: 3.5-4.5 16 | 17 | padWidth: 2.9 18 | padHeight: 5.4 19 | padSpace: 7 20 | -------------------------------------------------------------------------------- /wurth/7447798720.yaml: -------------------------------------------------------------------------------- 1 | name: '7447798720' 2 | description: WE-PDF SMD Shielded Power Inductor, 7.2 uH 3 | datasheet: http://katalog.we-online.de/pbs/datasheet/7447798720.pdf 4 | keywords: Inductor 5 | 6 | schematic: 7 | symbol: inductor 8 | 9 | housing: 10 | pattern: chip 11 | bodyWidth: 9.9-10.5 12 | bodyLength: 9.9-10.5 13 | height: 6.4 14 | leadWidth: 2.8-3.2 15 | leadLength: 1.5-2.5 16 | 17 | padWidth: 2.4 18 | padHeight: 3.4 19 | padSpace: 5.8 20 | -------------------------------------------------------------------------------- /wurth/749013011a.yaml: -------------------------------------------------------------------------------- 1 | name: 749013011A 2 | description: LAN-Transformer 10/100 BaseT PoE 3 | datasheet: http://katalog.we-online.com/pbs/datasheet/749013011A.pdf 4 | keywords: IC, Analog, Transformer 5 | 6 | pinout: 7 | TD: 8 | TD+: 1 9 | CTD: 2 10 | TD-: 3 11 | RD: 12 | RD+: 6 13 | CRD: 7 14 | RD-: 8 15 | TX: 16 | TX+: 16 17 | CTX: 15 18 | TX-: 14 19 | RX: 20 | RX+: 11 21 | CRX: 10 22 | RX-: 9 23 | 24 | NC: 4, 5, 13, 12 25 | 26 | properties: 27 | nc: NC 28 | 29 | schematic: 30 | symbol: transformer 31 | left: TD, NC, RD 32 | right: TX, NC, RX 33 | 34 | housing: 35 | pattern: SOP 36 | bodyWidth: 8.55-9.05 37 | bodyLength: 12.45-12.95 38 | height: 6.35 39 | leadSpan: 9.15-9.65 40 | leadWidth: 0.2-0.4 41 | leadLength: 0.85-1.35 42 | leadCount: 16 43 | pitch: 1.27 44 | 45 | padWidth: 1.91 46 | padHeight: 0.64 47 | padSpan: 10.68 48 | -------------------------------------------------------------------------------- /wurth/README.md: -------------------------------------------------------------------------------- 1 | WURTH 2 | ===== 3 | 4 | * **Würth Elektronik GmbH & Co. KG** 5 | * http://www.we-online.com 6 | -------------------------------------------------------------------------------- /yageo/README.md: -------------------------------------------------------------------------------- 1 | YAGEO 2 | ===== 3 | 4 | * **Yageo Corporation** 5 | * http://www.yageo.com 6 | -------------------------------------------------------------------------------- /yageo/sqp10a.yaml: -------------------------------------------------------------------------------- 1 | name: SQP10A 2 | description: Axial Lead Type Cement Resistor 3 | datasheet: http://www.yageo.com/documents/recent/Yageo%20LR_SQP%20NSP_2013.pdf 4 | keywords: Resistor, 10W 5 | 6 | schematic: 7 | symbol: resistor 8 | 9 | housing: 10 | pattern: custom 11 | bodyWidth: 8.5-10.5 12 | bodyLength: 46.5-49.5 13 | height: 8-10 14 | 15 | holeDiameter: 1 16 | padPosition: 0, -30, 0, 30 17 | -------------------------------------------------------------------------------- /yageo/sqp500.yaml: -------------------------------------------------------------------------------- 1 | name: SQP500 2 | description: Axial Lead Type Cement Resistor 3 | datasheet: http://www.yageo.com/documents/recent/Yageo%20LR_SQP%20NSP_2013.pdf 4 | keywords: Resistor, 5W 5 | 6 | schematic: 7 | symbol: resistor 8 | 9 | housing: 10 | pattern: custom 11 | bodyWidth: 8.5-10.5 12 | bodyLength: 20.5-23.5 13 | height: 8-10 14 | 15 | holeDiameter: 1 16 | padPosition: 0, -16, 0, 16 17 | -------------------------------------------------------------------------------- /yageo/tc124-jr-07.yaml: -------------------------------------------------------------------------------- 1 | name: TC124-JR-07 2 | decription: Array Chip Resistor 3 | keywords: Resistor, Array 4 | 5 | pinout: 1-8 6 | 7 | schematic: 8 | symbol: IC 9 | left: 1-4 10 | right: 8-5 11 | 12 | housing: 13 | pattern: chip-array 14 | options: concave 15 | bodyWidth: 0.9-1.1 16 | bodyLength: 1.9-2.1 17 | height: 0.35-0.55 18 | leadWidth: 0.4-0.5 19 | leadLength: 0.15-0.45 20 | leadCount: 8 21 | pitch: 0.5 22 | --------------------------------------------------------------------------------