├── .gitignore ├── .vscode └── settings.json ├── SIE-Zyxel ├── README.md └── zyxel_gs1900_ssh.exp ├── huawei ├── hua-ssh-noenable.md └── hua-ssh-noenable.yml ├── Fortinet ├── README.md ├── fortigate-ssh-non-vdom.yml ├── fortigate-ssh-vdom.yml └── fortigate-ssh-noenable-noninteractive.yml ├── pfSense ├── README.md └── pfSense-ssh.yml ├── SIE-Base ├── README.md └── script_template.yml ├── SIE-Radware ├── README.md ├── alteon_expect_script_template.yml └── alteon_cdump_test_script.exp ├── HP ├── README.md ├── H3C-ssh-noenable.yml ├── hp-procurve-ssh-noenable.yml ├── hp-flexfabric-ssh-noenable.yml ├── hp-procurve-ssh-noenable-v2.yml ├── HP-1920-SSH-noenable-v2.yml ├── hp-procurve-telnet-noenable.yml └── hp-5400-xl-ssh-enable.yml ├── Ubiquiti └── unifios-ssh-no-enable.yml ├── Cisco ├── README.md ├── ios-telnet-enable.yml ├── ios-telnet-enable-no-username.yml ├── ios-telnet-noenable.yml ├── ios-ssh-enable.yml ├── asa-ssh-enable.yml ├── ios-ssh-noenable.yml ├── cisco-smb-telnet-noenable.yml └── ciscowlc-ssh-noenable.yml ├── SSH-Private-Key ├── README.md └── ssh_priv_key_template.yml ├── Ruckus ├── Ruckus_Devices_NO_Enable.yml └── Ruckus_Devices_Enable.yml ├── linux └── centos-7-ssh.yml ├── Juniper └── JUNOS_SWITCHES.yml ├── Dell ├── dell-s4048-ssh-noenable.yml ├── dell-6248-telnet-enable.yml └── dell-5524-telnet-noenable.yml ├── RAD └── rad-ssh-noenable.yml ├── Sonicwall ├── Sonicwall-ssh-no-enable.yml └── Sonicwall-ssh-confirm-banner.yml ├── Palo_Alto_Networks ├── panos-ssh-v2.yml ├── panos-ssh.yml ├── panos-ssh-9x.yml └── README.md ├── Extreme └── extreme-summit-ssh-noenable.yml ├── Edge-core └── edgecore-ssh-noenable.yml ├── Mellanox └── mellanox-ssh-enable.yml ├── DiGi └── digi-ix20-ssh-noenable.yml ├── Mikrotik ├── mikrotik-ssh-banner_prompt.yml ├── mikrotik-ssh-noenable_v2.yml ├── mikrotik-ssh-noenable.yml ├── mikrotik-ssh-noenable_isNonInteractiveMode-Vector.yml └── README.md ├── Brocade └── brocade.yml ├── Checkpoint └── CheckpointGaiaOS_NoEnable.yml ├── base └── base.yml ├── vyos └── vyos-ssh-noenable.yml ├── Allied_Telesis └── AlliedTelesis-SSH-Enable.yml ├── Adtran └── Adtran900_telnet.yml ├── Aruba ├── Aruba-S3500-SSH-enable.yml ├── HP-A5120-SSH-NoSystem-View.yml └── Aruba2930F-SSH-NoEnable.yml ├── Adva └── adva-ssh-no_enable.yml ├── Calix └── calix-axos-ssh-no_enable.yml ├── Avaya ├── avaya-swtich-vector-ssh.yml └── avaya-4526gtx-telnet-noenable.yml ├── README-NONINTERACTIVEMODE-SSH.md ├── README.md └── LICENSE /.gitignore: -------------------------------------------------------------------------------- 1 | /nbproject/private/ -------------------------------------------------------------------------------- /.vscode/settings.json: -------------------------------------------------------------------------------- 1 | { 2 | "cSpell.words": [ 3 | "linebreak", 4 | "rconfig" 5 | ] 6 | } -------------------------------------------------------------------------------- /SIE-Zyxel/README.md: -------------------------------------------------------------------------------- 1 | Expect scripts for various Zyxel devices for the Script Integration Engine feature on rConfig V7 Professional -------------------------------------------------------------------------------- /huawei/hua-ssh-noenable.md: -------------------------------------------------------------------------------- 1 | For Huawei devices using the 'hua-ssh-noenable.yml' file, please setup the device 'Main Prompt' field in 2 | rConfig devices page with the Huawei enable prompt 3 | -------------------------------------------------------------------------------- /Fortinet/README.md: -------------------------------------------------------------------------------- 1 | 2 | 3 | As of the update (Date: 21/11/2024), a new template has been added as is only suppport in V6 Core (installed or updated after this date) and V7 (7.2.9), called NonInteractive. Please see opt level Readme on this new feature. 4 | -------------------------------------------------------------------------------- /pfSense/README.md: -------------------------------------------------------------------------------- 1 | For PFSense devices, we need to break into the shell from the initial CLI options splash screen using option 8. This is set in the connection template under the 'paging' options. 2 | 3 | To view the config output, set the following command for the given PFSense device in rConfig 4 | 5 | ```BASH 6 | cat /cf/conf/config.xml 7 | ``` -------------------------------------------------------------------------------- /SIE-Base/README.md: -------------------------------------------------------------------------------- 1 | 2 | # Script Integration Engine 3 | 4 | This is the base connection template for the new V7 Pro Script Integration Feature. Presently, this is only a V7 Pro feature, but may come to core in the future. 5 | 6 | Please review the documentation on the feature here https://docs.rconfig.com/integrations/script-integration-engine/sie/ -------------------------------------------------------------------------------- /SIE-Radware/README.md: -------------------------------------------------------------------------------- 1 | 2 | # Script Integration Engine 3 | 4 | This is the base connection template for the new V7 Pro Script Integration Feature. Presently, this is only a V7 Pro feature, but may come to core in the future. 5 | 6 | Please review the documentation on the feature here https://docs.rconfig.com/integrations/script-integration-engine/sie/ -------------------------------------------------------------------------------- /HP/README.md: -------------------------------------------------------------------------------- 1 | 2 | # HP Procurve Switch Support 3 | 4 | There are known problems with scripts and automation software connecting to HP Procurve Switches due to their implementation of VT100 terminal characters in their software. 5 | 6 | > hp-procurve-ssh-noenable-v2.yml - Fully tested and supported on rConfig v6, should work on v3 7 | 8 | > hp-procurve-ssh-noenable.yml - NOT supported on rConfig v6, should work on v3 9 | 10 | > hp-procurve-telnet-noenable.yml - NOT supported on rConfig v6, should work on v3 11 | 12 | Essentially, the best practice for v6 users is to use the SSH template and enable your switches for SSH also. This protocol is fully tested and support on rConfig v6 13 | -------------------------------------------------------------------------------- /SIE-Base/script_template.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/integrations/script-integration-engine/sie/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Script_Template" 9 | desc: "This is an example script connection template" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | idleTimeout: 30 # Idle timeout (in seconds) 14 | protocol: script # Protocol type (script for SIE) 15 | -------------------------------------------------------------------------------- /SIE-Radware/alteon_expect_script_template.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/integrations/script-integration-engine/sie/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "alteon_test_script_template" 9 | desc: "This is an example alteon expect script" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | idleTimeout: 30 # Idle timeout (in seconds) 14 | protocol: script # Protocol type (script for SIE) 15 | -------------------------------------------------------------------------------- /SIE-Radware/alteon_cdump_test_script.exp: -------------------------------------------------------------------------------- 1 | #!/usr/bin/expect -f 2 | 3 | # Alteon Virtual IPs 4 | 5 | set timeout 10 6 | set devip [lindex $argv 0] 7 | set user [lindex $argv 1] 8 | set pwd [lindex $argv 2] 9 | 10 | send_user "IP: $devip Connect as $user\n" 11 | spawn ssh -o "KexAlgorithms +diffie-hellman-group1-sha1" -o "StrictHostKeyChecking no" -o "UserKnownHostsFile junk" $user@$devip 12 | expect { 13 | timeout { send_user "\nERR: Timeout Exceeded - Check Host\n"; exit 1 } 14 | eof { send_user "\nERR: SSH Connection To $devip Failed\n"; exit 1 } 15 | "*#" {} 16 | "*assword:" { 17 | send -- "$pwd\r" 18 | } 19 | } 20 | expect { 21 | "*Confirm seeing above note" { 22 | send -- "y\r" 23 | } 24 | "*#" {} 25 | } 26 | send -- "lines 0\r" 27 | expect "*#" 28 | send -- "cdump\r" 29 | expect -ex {[y/n]:} 30 | send -- "n\r" 31 | set timeout 80 32 | expect "script end" 33 | set timeout 10 34 | expect "*#" 35 | send -- "quit\r" 36 | send_user "\n" 37 | -------------------------------------------------------------------------------- /Ubiquiti/unifios-ssh-no-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "UnifiOS - SSH - Enable" 9 | desc: "UnifiOS SSH based connection with enable mode" 10 | 11 | connect: 12 | timeout: 30 13 | protocol: ssh 14 | port: 22 15 | 16 | auth: 17 | username: "Username:" 18 | password: "Password:" 19 | enable: on 20 | enableCmd: "enable" 21 | enablePassPrmpt: "Password:" 22 | hpAnyKeyStatus: off 23 | hpAnyKeyPrmpt: "Press any key to continue" 24 | 25 | config: 26 | linebreak: "n" 27 | paging: on 28 | pagingCmd: "terminal length 0" 29 | resetPagingCmd: "terminal length 40" 30 | pagerPrompt: "" 31 | pagerPromptCmd: "" 32 | saveConfig: "wr mem" 33 | exitCmd: "quit" 34 | -------------------------------------------------------------------------------- /Cisco/README.md: -------------------------------------------------------------------------------- 1 | # Cisco Cisco 1120 FTD firewalls 2 | You may use the standard Cisco IOS SSH Template for these devices, BUT when configuring the device within the rConfig UI, please use the following as a prompt for the device. '>' 3 | A single qupte, greater than and single quote. This will ensure you get a full backup. 4 | 5 | 6 | # Cisco WLC Controllers 7 | There are known problems with scripts and automation software connecting to Cisco WLC Controllers due to their implementation of SSH/ Telnet protocols in their software. 8 | 9 | > You may only use the ciscowlc-ssh-noenable.yml template in this repository. 10 | 11 | > You may only use SSH, please configure your devices accordingly. 12 | 13 | > You may not run the 'shwo run-config' command, as it takes far to long to print out. You may use the 'show run-config commands' instead for running configuration 14 | 15 | Essentially, the best practice for v6 users is to use the SSH template and enable your switches for SSH also. This protocol is fully tested and support on rConfig v6 16 | 17 | Related Cisco WLC Information: [https://quickview.cloudapps.cisco.com/quickview/bug/CSCve45024](https://quickview.cloudapps.cisco.com/quickview/bug/CSCve45024) 18 | -------------------------------------------------------------------------------- /HP/H3C-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "H3C - SSH - No Enable" 9 | desc: "H3C - SSH - No Enable" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | 23 | config: 24 | linebreak: "n" # Linebreak format (default: 'n') 25 | paging: on # CLI paging enabled 26 | pagingCmd: "screen-length disable" # Disable paging command 27 | resetPagingCmd: "undo screen-length disable" # Reset paging command 28 | pagerPrompt: "" # DEPRECATED: This value is ignored 29 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 30 | saveConfig: "wr mem" # Save configuration command 31 | exitCmd: "quit" # Exit command 32 | -------------------------------------------------------------------------------- /SSH-Private-Key/README.md: -------------------------------------------------------------------------------- 1 | This is an example for connecting to devices with rConfig V7 Professional with SSH private keys 2 | 3 | ## Key Configuration Options 4 | 5 | ### `sshPrivKey` 6 | 7 | - This parameter specifies the path to the SSH private key used for authentication when connecting to remote devices. 8 | - The SSH key must be configured correctly within the Device Credentials feature of `rConfig V7 Pro+` to ensure seamless and secure connectivity. 9 | - It is crucial that the private key is stored securely and adheres to best practices for key management, including the use of passphrases and proper file permissions. 10 | 11 | ### `Ansihost` 12 | 13 | - This option defines the host or list of hosts that the configuration will target. 14 | - It supports a variety of SSH-compatible devices, enabling flexible and scalable management across different network environments. 15 | - The `Ansihost` parameter is essential for directing the automation tasks to the correct remote systems, ensuring accurate and efficient execution of commands and scripts. 16 | - The setTerminalDimensions might need adjustment depending on the size of files being backed up. 17 | --- 18 | 19 | | Filename | Usage and testing notes | 20 | |-------------|----- | 21 | | ssh_priv_key_template.yml | Tested with native linux such as Rocky 9 and Ubuntu | 22 | 23 | 24 | This configuration file plays a crucial role in the secure and efficient operation of `rConfig`'s device management capabilities, leveraging SSH for robust and reliable connectivity. Proper setup and adherence to the guidelines above will ensure that `rConfig V7 Pro+` functions optimally, maintaining the security and integrity of your network management tasks. 25 | -------------------------------------------------------------------------------- /Ruckus/Ruckus_Devices_NO_Enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Ruckus_Devices_NO_Enable" 9 | desc: "Ruckus Connection Template" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command 21 | enablePassPrmpt: "Password:" # Enable password prompt 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format 27 | paging: off # CLI paging disabled 28 | pagingCmd: "skip-page-display" # Disable paging command 29 | resetPagingCmd: "page-display" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /linux/centos-7-ssh.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Centos 7 SSH" 9 | desc: "Centos 7 SSH" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: off # CLI paging disabled 28 | pagingCmd: "terminal length 0" # Disable paging command 29 | resetPagingCmd: "terminal length 40" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /Ruckus/Ruckus_Devices_Enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Ruckus_Devices_Enable" 9 | desc: "Ruckus Connection Template" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command 21 | enablePassPrmpt: "Password:" # Enable password prompt 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "skip-page-display" # Disable paging command 29 | resetPagingCmd: "page-display" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /Juniper/JUNOS_SWITCHES.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "JUNOS_SWITCHES" 9 | desc: "JUNOS SWITCH Template" 10 | 11 | connect: 12 | timeout: 60 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "login:" # Username prompt 18 | password: "password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "configure" # Enable command (not used) 21 | enablePassPrmpt: "password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "press any key" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "r" # Linebreak format (set to 'r') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "set cli screen-length 0" # Disable paging command 29 | resetPagingCmd: "set cli screen-width 1024" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "exit" # Exit command 34 | -------------------------------------------------------------------------------- /Dell/dell-s4048-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Dell S4048 ssh noenable" 9 | desc: "Dell S4048 ssh noenable" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Login: " # Username prompt 18 | password: "Password: " # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save config command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /HP/hp-procurve-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP Procurve SSh noenable" 9 | desc: "HP Procurve SSh noenable" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: on # 'Press any key' handling enabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "no page" # Disable paging command 29 | resetPagingCmd: "page" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /RAD/rad-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "RAD - SSH - No Enable" 9 | desc: "RAD SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 60 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "" # Username prompt 18 | password: "password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "configure terminal length 0" # Disable paging command 29 | resetPagingCmd: "" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "save" # Save configuration command 33 | exitCmd: "logout" # Exit command 34 | -------------------------------------------------------------------------------- /Sonicwall/Sonicwall-ssh-no-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Sonicwall-ssh-no-enable" 9 | desc: "Sonicwall SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "yes" # Confirmation command (not used) 21 | enablePassPrmpt: "configure" # Post-confirmation prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format 27 | paging: on # CLI paging enabled 28 | pagingCmd: "no cli pager session" # Disable paging 29 | resetPagingCmd: "cli pager session" # Re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "exit" # Exit command 34 | -------------------------------------------------------------------------------- /HP/hp-flexfabric-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP FlexFabric SSH noenable v2" 9 | desc: "HP FlexFabric SSH noenable v2 for v6 users" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: on # 'Press any key' handling enabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "screen-length disable" # Disable paging command 29 | resetPagingCmd: "screen-length enable" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /HP/hp-procurve-ssh-noenable-v2.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP Procurve SSH noenable v2" 9 | desc: "HP Procurve SSH noenable v2 for v6 users" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: on # 'Press any key' handling enabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "nno page" # Disable paging command 29 | resetPagingCmd: "page" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /Palo_Alto_Networks/panos-ssh-v2.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Palo Alto - SSH - No Configure Mode" 9 | desc: "Palo Alto Networks PAN-OS SSH based connection without configuration mode" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "login as:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: on 20 | enableCmd: "set cli scripting-mode on" 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: off 28 | pagingCmd: "set cli scripting-mode on\nset cli pager off" # Disable paging command 29 | resetPagingCmd: "set cli scripting-mode off\nset cli pager on" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | 35 | options: 36 | AnsiHost: "yes" # ANSI terminal emulation enabled 37 | setWindowSize: [240, 2048] # Terminal window size (v6 only) 38 | setTerminalDimensions: [260, 1000] # Terminal dimensions for ANSI sessions (v6 only) 39 | -------------------------------------------------------------------------------- /huawei/hua-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Huawei VRP SSH no enable" 9 | desc: "Huawei VRP SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "" # Username prompt 18 | password: "" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "system-view" # Enable command (not used) 21 | enablePassPrmpt: "" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "screen-length 0 temporary" # Disable paging command 29 | resetPagingCmd: "screen-length 40 temporary" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "save" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /pfSense/pfSense-ssh.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "pfSense - SSH" 9 | desc: "pfSense SSH based connection with option splash screen" 10 | 11 | connect: 12 | timeout: 10 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "8" # Disable paging command 29 | resetPagingCmd: "" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /Extreme/extreme-summit-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Extreme EXOS - SSH - No Enable" 9 | desc: "Extreme EXOS SSH based connection with enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "username:" # Username prompt 18 | password: "password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: " " # Enable command (not used) 21 | enablePassPrmpt: "password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press to continue or to quit:" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "disable clipaging" # Disable paging command 29 | resetPagingCmd: "disable clipaging" # Reset paging command 30 | pagerPrompt: "Next page: Space, quit: Q" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: " " # Save configuration command 33 | exitCmd: "quit" # Exit command -------------------------------------------------------------------------------- /Palo_Alto_Networks/panos-ssh.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Palo Alto - SSH - No Configure Mode" 9 | desc: "Palo Alto Networks PAN-OS SSH based connection without configuration mode" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "login as:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "set cli pager off" # Disable paging command 29 | resetPagingCmd: "set cli pager on" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /HP/HP-1920-SSH-noenable-v2.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP 1920 SSH noenable v2" 9 | desc: "HP 1920 SSH noenable v2 for v6 users" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: on # Enable mode enabled 20 | enableCmd: "_cmdline-mode on \n y" # Enable command 21 | linebreak: "y" # Experimental: sending command to continue 22 | enablePassPrmpt: "Password:" # Enable password prompt 23 | hpAnyKeyStatus: on # 'Press any key' handling enabled 24 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 25 | 26 | config: 27 | linebreak: "n" # Linebreak format (default: 'n') 28 | paging: on # CLI paging enabled 29 | pagingCmd: "screen-length disable" # Disable paging command 30 | resetPagingCmd: "page" # Reset paging command 31 | pagerPrompt: "" # DEPRECATED: This value is ignored 32 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 33 | saveConfig: "wr mem" # Save configuration command 34 | exitCmd: "quit" # Exit command 35 | -------------------------------------------------------------------------------- /HP/hp-procurve-telnet-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | # note: command "show startup-config" SHOULD BE "show config" 7 | 8 | main: 9 | name: "HP Procurve telnet noenable" 10 | desc: "HP Procurve telnet noenable" 11 | 12 | connect: 13 | timeout: 5 # Connection timeout (in seconds) 14 | protocol: telnet # Protocol: telnet 15 | port: 23 # Port number 16 | 17 | auth: 18 | username: "Username:" # Username prompt 19 | password: "Password:" # Password prompt 20 | enable: off # Enable mode disabled 21 | enableCmd: "enable" # Enable command (not used) 22 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 23 | hpAnyKeyStatus: on # 'Press any key' handling enabled 24 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 25 | 26 | config: 27 | linebreak: "n" # Linebreak format (default: 'n') 28 | paging: on # CLI paging enabled 29 | pagingCmd: "no page" # Disable paging command 30 | resetPagingCmd: "page" # Reset paging command 31 | pagerPrompt: "" # DEPRECATED: This value is ignored 32 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 33 | saveConfig: "wr mem" # Save configuration command 34 | exitCmd: "quit" # Exit command 35 | -------------------------------------------------------------------------------- /Sonicwall/Sonicwall-ssh-confirm-banner.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Sonicwall-ssh-enable-confirm-banner" 9 | desc: "Sonicwall SSH based connection with enable mode to issue -yes- command in order to pass banner message confirmation" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: on # Enable mode enabled 20 | enableCmd: "yes" # Enable confirmation command 21 | enablePassPrmpt: "configure" # Prompt after confirmation 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format 27 | paging: on # CLI paging enabled 28 | pagingCmd: "no cli pager session" # Disable paging 29 | resetPagingCmd: "cli pager session" # Re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "exit" # Exit command 34 | -------------------------------------------------------------------------------- /Edge-core/edgecore-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Edge Core - SSH - No Enable" 9 | desc: "Edge Core (https://www.edge-core.com/) SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "terminal length 0" # Disable paging command 29 | resetPagingCmd: "terminal length 40" # Reset paging command 30 | pagerPrompt: "--More--" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Save configuration command 33 | exitCmd: "quit" # Exit command -------------------------------------------------------------------------------- /Mellanox/mellanox-ssh-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## 7 | ## You need to have set "no cli default paging enable" in the switch running config as the paging system isnt supported by rConfig 8 | 9 | main: 10 | name: "Mellanox SSH enable" 11 | desc: "Mellanox SSH enable" 12 | 13 | connect: 14 | timeout: 5 # Connection timeout (in seconds) 15 | protocol: ssh # Protocol: ssh 16 | port: 22 # Port number 17 | 18 | auth: 19 | username: "Username:" # Username prompt 20 | password: "Password:" # Password prompt 21 | enable: on # Enable mode enabled 22 | enableCmd: "enable" # Enable command 23 | enablePassPrmpt: "Password:" # Enable password prompt 24 | hpAnyKeyStatus: off # 'Press any key' handling disabled 25 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 26 | 27 | config: 28 | linebreak: "n" # Linebreak format (default: 'n') 29 | paging: off # CLI paging disabled 30 | pagingCmd: "" # Disable paging command 31 | resetPagingCmd: "" # Reset paging command 32 | pagerPrompt: "" # DEPRECATED: This value is ignored 33 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 34 | saveConfig: "wr mem" # Save configuration command 35 | exitCmd: "quit" # Exit command 36 | -------------------------------------------------------------------------------- /DiGi/digi-ix20-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Digi IX20 - SSH - No Enable" 9 | desc: "Digi IX20 SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 10 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: on # 'Press any key' handling enabled 23 | hpAnyKeyPrmpt: "Select access or quit" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: off # CLI paging disabled 28 | pagingCmd: "" # No paging command 29 | resetPagingCmd: "" # No reset command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "" # No save config command 33 | exitCmd: "quit" # Exit command 34 | 35 | options: 36 | AnsiHost: "no" # ANSI terminal emulation off 37 | setWindowSize: [160, 2048] # Terminal window size 38 | -------------------------------------------------------------------------------- /Dell/dell-6248-telnet-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Dell 6248P Telnet Enable" 9 | desc: "Dell 6248P Telnet Enable Description" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: telnet # Protocol: telnet 14 | port: 23 # Port number 15 | 16 | auth: 17 | username: "User:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: on # Enable mode enabled 20 | enableCmd: "enable" # Enable command 21 | enablePassPrmpt: "Password:" # Enable password prompt 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: off # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "copy running-config startup-config" # Save config command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /SIE-Zyxel/zyxel_gs1900_ssh.exp: -------------------------------------------------------------------------------- 1 | #!/usr/bin/expect -f 2 | 3 | # Setup Params 4 | set timeout 3 5 | # Get the IP address from the first argument 6 | set ip [lindex $argv 0] 7 | # Get the username from the second argument 8 | set user [lindex $argv 1] 9 | # Get the password from the third argument 10 | set pwd [lindex $argv 2] 11 | 12 | # Display connection details 13 | send_user "IP: $ip Connect as $user\n" 14 | 15 | # Start SSH session 16 | spawn ssh $user@$ip 17 | 18 | # Handle SSH key verification and password prompt 19 | expect { 20 | timeout { 21 | send_user "\nERR: Timeout Exceeded - Check Host\n" 22 | exit 1 23 | } 24 | eof { 25 | send_user "\nERR: SSH Connection To $ip Failed\n" 26 | exit 1 27 | } 28 | # Already have a shell prompt 29 | "*#" {} 30 | "*assword:" { 31 | send -- "$pwd\r" 32 | } 33 | } 34 | 35 | # Expect the shell prompt 36 | expect ".*#" 37 | 38 | # Send the 'show run' command 39 | send "show run\r" 40 | 41 | # Define the interval in seconds to wait before sending each space 42 | set interval 2 43 | 44 | # Loop to keep sending space characters until the command completes 45 | while {1} { 46 | # Wait for the specified interval 47 | after [expr $interval * 1000] 48 | # puts "Sending space character..." 49 | send -- " " 50 | 51 | # Check if the command has completed 52 | expect { 53 | eof { 54 | # puts "End of file detected, exiting..." 55 | break 56 | } 57 | timeout { 58 | # Continue sending spaces if the command is still running 59 | # puts "Timeout occurred, continuing..." 60 | continue 61 | } 62 | "*#" { 63 | # puts "Shell prompt detected, sending exit command..." 64 | send "exit\r" 65 | expect eof 66 | break 67 | } 68 | } 69 | } 70 | -------------------------------------------------------------------------------- /HP/hp-5400-xl-ssh-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP FlexFabric SSH noenable v2" 9 | desc: "HP FlexFabric SSH noenable v2 for v6 users" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enableUsername: on # Enable mode requires username 22 | enableUsernamePrmpt: "Please Enter Login Name:" # Enable username prompt 23 | enablePassPrmpt: "Please Enter Password:" # Enable password prompt 24 | hpAnyKeyStatus: on # 'Press any key' handling enabled 25 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 26 | 27 | config: 28 | linebreak: "n" # Linebreak format (default: 'n') 29 | paging: on # CLI paging enabled 30 | pagingCmd: "screen-length disable" # Disable paging command 31 | resetPagingCmd: "screen-length enable" # Reset paging command 32 | pagerPrompt: "" # DEPRECATED: This value is ignored 33 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 34 | saveConfig: "wr mem" # Save configuration command 35 | exitCmd: "quit" # Exit command 36 | -------------------------------------------------------------------------------- /Mikrotik/mikrotik-ssh-banner_prompt.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## 7 | ## You must append '+ct' to the username for mikrotek devices i.e. username for the device will be 'admin+ct' 8 | 9 | main: 10 | name: "MikroTek SSH with banner prompt" 11 | desc: "MikroTek SSH with banner prompt" 12 | 13 | connect: 14 | timeout: 10 # Connection timeout (in seconds) 15 | protocol: ssh # Protocol: ssh 16 | port: 22 # Port number 17 | 18 | auth: 19 | username: "Username:" # Username prompt 20 | password: "Password:" # Password prompt 21 | enable: off # Enable mode disabled 22 | enableCmd: "enable" # Enable command (not used) 23 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 24 | hpAnyKeyStatus: on # 'Press any key' handling enabled 25 | hpAnyKeyPrmpt: "Please press \"Enter\" to continue!" # Custom 'press any key' prompt 26 | 27 | config: 28 | linebreak: "r" # Linebreak format (set to 'r') 29 | paging: off # CLI paging disabled 30 | pagingCmd: "terminal length 0" # Disable paging command 31 | resetPagingCmd: "terminal length 40" # Reset paging command 32 | pagerPrompt: "" # DEPRECATED: This value is ignored 33 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 34 | saveConfig: "wr mem" # Save configuration command 35 | exitCmd: "quit" # Exit command 36 | isMikrotik: yes # MikroTik-specific behavior 37 | -------------------------------------------------------------------------------- /Mikrotik/mikrotik-ssh-noenable_v2.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## 7 | ## You must append '+ct' to the username for mikrotek devices i.e. username for the device will be 'admin+ct' 8 | 9 | main: 10 | name: "MikroTek SSH nnoenable" 11 | desc: "MikroTek SSH nnoenable" 12 | 13 | connect: 14 | timeout: 10 # Connection timeout (in seconds) 15 | protocol: ssh # Protocol: ssh 16 | port: 22 # Port number 17 | 18 | auth: 19 | username: "Username:" # Username prompt 20 | password: "Password:" # Password prompt 21 | enable: off # Enable mode disabled 22 | enableCmd: "enable" # Enable command (not used) 23 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 24 | hpAnyKeyStatus: off # 'Press any key' handling disabled 25 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 26 | 27 | config: 28 | linebreak: "r" # Linebreak format (set to 'r') 29 | paging: off # CLI paging disabled 30 | pagingCmd: "terminal length 0" # Disable paging command 31 | resetPagingCmd: "terminal length 40" # Reset paging command 32 | pagerPrompt: "" # DEPRECATED: This value is ignored 33 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 34 | saveConfig: "wr mem" # Save configuration command 35 | exitCmd: "quit" # Exit command 36 | isMikrotik: yes # MikroTik-specific behavior 37 | -------------------------------------------------------------------------------- /Dell/dell-5524-telnet-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Dell 5524 Telnet NoEnable" 9 | desc: "Dell 5524 Telnet NoEnable Description" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: telnet # Protocol: telnet 14 | port: 23 # Port number 15 | 16 | auth: 17 | username: "User:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (ignored) 21 | enablePassPrmpt: "Password:" # Enable password prompt (ignored) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: off # Disable CLI paging 28 | pagingCmd: "terminal datadump" # Command to disable paging 29 | resetPagingCmd: "no terminal datadump" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "copy running-config startup-config" # Save config command 33 | exitCmd: "quit" # Exit command 34 | -------------------------------------------------------------------------------- /Cisco/ios-telnet-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS - TELNET - Enable" # Cisco IOS via TELNET with enable mode 9 | desc: "Cisco IOS TELNET based connection with enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: telnet # Protocol: telnet 14 | port: 23 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: on # Enable mode required 20 | enableCmd: "enable" # Enable command 21 | enablePassPrmpt: "Password:" # Enable password prompt 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Cisco/ios-telnet-enable-no-username.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS - TELNET - Enable - No Username" # Cisco IOS via TELNET with enable, no username 9 | desc: "Cisco IOS TELNET based connection with enable mode and no username" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: telnet # Protocol: telnet 14 | port: 23 # Port number 15 | 16 | auth: 17 | username: "" # Username not required 18 | password: "Password:" # Prompt for password 19 | enable: on # Enable mode required 20 | enableCmd: "enable" # Enable command 21 | enablePassPrmpt: "Password:" # Enable password prompt 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Cisco/ios-telnet-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS - TELNET - No Enable" # Cisco IOS via TELNET without enable mode 9 | desc: "Cisco IOS TELNET based connection without enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: telnet # Protocol: telnet 14 | port: 23 # Port number 15 | 16 | auth: 17 | username: "Username:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode not required 20 | enableCmd: "enable" # Enable command (ignored if enable is off) 21 | enablePassPrmpt: "Password:" # Enable password prompt (ignored) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Cisco/ios-ssh-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS - SSH - Enable" # Template name for Cisco IOS with SSH and enable mode 9 | desc: "Cisco IOS SSH based connection with enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: on # Enable mode required 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt for enable password 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Palo_Alto_Networks/panos-ssh-9x.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Palo Alto v9.x - SSH - No Configure Mode" 9 | desc: "Palo Alto Networks PAN-OS 9.x SSH based connection without configuration mode" 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | username: "login as:" # Username prompt 18 | password: "Password:" # Password prompt 19 | enable: off # Enable mode disabled 20 | enableCmd: "enable" # Enable command (not used) 21 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 22 | hpAnyKeyStatus: off # 'Press any key' handling disabled 23 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 24 | 25 | config: 26 | linebreak: "n" # Linebreak format (default: 'n') 27 | paging: on # CLI paging enabled 28 | pagingCmd: "set cli pager off" # Disable paging command 29 | resetPagingCmd: "set cli pager on" # Reset paging command 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 32 | saveConfig: "commit" # Save configuration command 33 | exitCmd: "quit" # Exit command 34 | 35 | options: 36 | AnsiHost: "yes" # ANSI terminal emulation enabled (v6 only) 37 | setWindowSize: [240, 2048] # Terminal window size (v6 only) 38 | setTerminalDimensions: [260, 1000] # Terminal dimensions for ANSI sessions (v6 only) 39 | -------------------------------------------------------------------------------- /Cisco/asa-ssh-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco ASA - SSH - Enable" # Template name for Cisco ASA devices 9 | desc: "Cisco ASA SSH based connection with enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: on # Enable mode required 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt for enable password 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt for key press if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Disable paging? Set to 'on' to do so 28 | pagingCmd: "terminal pager 0" # Command to disable paging 29 | resetPagingCmd: "terminal pager 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Cisco/ios-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS - SSH - No Enable" # Template name for Cisco IOS using SSH without enable mode 9 | desc: "Cisco IOS SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 60 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode not required 20 | enableCmd: "enable" # Placeholder command (not used) 21 | enablePassPrmpt: "Password:" # Placeholder prompt (not used) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Mikrotik/mikrotik-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## 7 | ## You must append '+ct' to the username for mikrotek devices i.e. username for the device will be 'admin+ct' 8 | 9 | main: 10 | name: "MikroTek SSH nnoenable" 11 | desc: "MikroTek SSH nnoenable" 12 | 13 | connect: 14 | timeout: 10 # Connection timeout (in seconds) 15 | protocol: ssh # Protocol: ssh 16 | port: 22 # Port number 17 | 18 | auth: 19 | username: "Username:" # Username prompt 20 | password: "Password:" # Password prompt 21 | enable: off # Enable mode disabled 22 | enableCmd: "enable" # Enable command (not used) 23 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 24 | hpAnyKeyStatus: off # 'Press any key' handling disabled 25 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 26 | 27 | config: 28 | linebreak: "r" # Linebreak format (set to 'r') 29 | paging: off # CLI paging disabled 30 | pagingCmd: "terminal length 0" # Disable paging command 31 | resetPagingCmd: "terminal length 40" # Reset paging command 32 | pagerPrompt: "" # DEPRECATED: This value is ignored 33 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 34 | saveConfig: "wr mem" # Save configuration command 35 | exitCmd: "quit" # Exit command 36 | 37 | options: 38 | AnsiHost: "yes" # ANSI terminal emulation enabled 39 | setWindowSize: [240, 2048] # Terminal window size (v6 only) 40 | setTerminalDimensions: [260, 1000] # Terminal dimensions for ANSI sessions (v6 only) 41 | -------------------------------------------------------------------------------- /Mikrotik/mikrotik-ssh-noenable_isNonInteractiveMode-Vector.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## 7 | ## You must append '+ct' to the username for mikrotek devices i.e. username for the device will be 'admin+ct' 8 | 9 | main: 10 | name: "MikroTek SSH nnoenable isNonInteractiveMode - Vector" 11 | desc: "MikroTek SSH nnoenable isNonInteractiveMode - Vector" 12 | 13 | connect: 14 | timeout: 10 # Connection timeout (in seconds) 15 | protocol: ssh # Protocol: ssh 16 | port: 22 # Port number 17 | isNonInteractiveMode: true # SSH non-interactive mode 18 | 19 | auth: 20 | username: "Username:" # Username prompt 21 | password: "Password:" # Password prompt 22 | enable: off # Enable mode disabled 23 | enableCmd: "enable" # Enable command (not used) 24 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 25 | hpAnyKeyStatus: off # 'Press any key' handling disabled 26 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 27 | 28 | config: 29 | linebreak: "r" # Linebreak format (set to 'r') 30 | paging: off # CLI paging disabled 31 | pagingCmd: "terminal length 0" # Disable paging command 32 | resetPagingCmd: "terminal length 40" # Reset paging command 33 | pagerPrompt: "" # DEPRECATED: This value is ignored 34 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 35 | saveConfig: "wr mem" # Save configuration command 36 | exitCmd: "quit" # Exit command 37 | isMikrotik: yes # MikroTik-specific behavior 38 | -------------------------------------------------------------------------------- /SSH-Private-Key/ssh_priv_key_template.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "SSH Private Key Template" 9 | desc: "SSH Private Key Template" 10 | 11 | connect: 12 | timeout: 10 # Connection timeout (in seconds) 13 | protocol: ssh # Protocol: ssh 14 | port: 22 # Port number 15 | 16 | auth: 17 | sshPrivKey: on # Enable SSH Private Key authentication 18 | username: "Username:" # Username prompt 19 | password: "Password:" # Password prompt (used for passphrase or fallback) 20 | enable: off # Enable mode disabled 21 | enableCmd: "enable" # Enable command (not used) 22 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 23 | hpAnyKeyStatus: off # 'Press any key' handling disabled 24 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 25 | 26 | config: 27 | linebreak: "n" # Linebreak format 28 | paging: off # CLI paging disabled 29 | pagingCmd: "terminal length 0" # Paging off command 30 | resetPagingCmd: "terminal length 40" # Reset paging command 31 | pagerPrompt: "" # DEPRECATED: This value is ignored 32 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 33 | saveConfig: "wr mem" # Save configuration command 34 | exitCmd: "quit" # Exit command 35 | 36 | options: 37 | AnsiHost: "yes" # ANSI terminal emulation enabled 38 | setWindowSize: [240, 2048] # Terminal window size 39 | setTerminalDimensions: [260, 100000] # Terminal dimensions for ANSI sessions 40 | -------------------------------------------------------------------------------- /Fortinet/fortigate-ssh-non-vdom.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## Fortigate Prompts should not include a regexp wildcard (.*) between the hostname and the #. in the UI 7 | ## Fortigate Use format: `hostname #` (no space or wildcard). 8 | ## If prompt contains $ make sure to escape it in the UI with a `\` backslash i.e. prompt\$ 9 | 10 | main: 11 | name: "Fortigate SSH no enable: Non-Vdom" 12 | desc: "Fortigate SSH no enable: Non-Vdom" 13 | 14 | connect: 15 | timeout: 5 # Connection timeout (in seconds). Long configs 30k+ lines need higher timeout value on Fortigates. 16 | protocol: ssh # Protocol: ssh 17 | port: 22 # Port number 18 | 19 | auth: 20 | username: "Username:" # Username prompt 21 | password: "Password:" # Password prompt 22 | enable: off # Enable mode disabled 23 | enableCmd: "enable" # Enable command (not used) 24 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 25 | hpAnyKeyStatus: off # 'Press any key' handling disabled 26 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 27 | 28 | config: 29 | linebreak: "n" # Linebreak format (default: 'n') 30 | paging: on # CLI paging enabled 31 | pagingCmd: " config system console\n set output standard\n end" # Disable paging command 32 | resetPagingCmd: "" # Reset paging command 33 | pagerPrompt: "" # DEPRECATED: This value is ignored 34 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 35 | saveConfig: "config system global\n set cfg-save automatic\n end\n" # Save configuration command 36 | exitCmd: "quit\n" # Exit command 37 | -------------------------------------------------------------------------------- /Cisco/cisco-smb-telnet-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco IOS SMB - TELNET - No Enable" # Template name for Cisco SMB over Telnet 9 | desc: "Cisco IOS TELNET based connection without enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: telnet # Connection protocol: 'ssh' or 'telnet' 14 | port: 23 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "User Name:" # CLI prompt for username (Cisco SMB style) 18 | password: "Password" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Enable command (not used here) 21 | enablePassPrmpt: "Password:" # Prompt for enable password (not used here) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if applicable 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save configuration 33 | exitCmd: "quit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Brocade/brocade.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Brocade_Devices" # Unique name for Brocade device template 9 | desc: "Brocade Connection Template" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Enable command (unused here but defined) 21 | enablePassPrmpt: "Password:" # Prompt for enable password 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if hpAnyKeyStatus is enabled 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "skip-page-display" # Command to disable paging 29 | resetPagingCmd: "page-display" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Fortinet/fortigate-ssh-vdom.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## Fortigate Prompts should not include a regexp wildcard (.*) between the hostname and the #. in the UI 7 | ## Fortigate Use format: `hostname #` (no space or wildcard). 8 | ## If prompt contains $ make sure to escape it in the UI with a `\` backslash i.e. prompt\$ 9 | 10 | main: 11 | name: "Fortigate SSH no enable: Vdom" 12 | desc: "Fortigate SSH no enable: Vdom" 13 | 14 | connect: 15 | timeout: 5 # Connection timeout (in seconds). Long configs 30k+ lines need higher timeout value on Fortigates. 16 | protocol: ssh # Protocol: ssh 17 | port: 22 # Port number 18 | 19 | auth: 20 | username: "Username:" # Username prompt 21 | password: "Password:" # Password prompt 22 | enable: off # Enable mode disabled 23 | enableCmd: "enable" # Enable command (not used) 24 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 25 | hpAnyKeyStatus: off # 'Press any key' handling disabled 26 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 27 | 28 | config: 29 | linebreak: "n" # Linebreak format (default: 'n') 30 | paging: on # CLI paging enabled 31 | pagingCmd: "config global\nconfig system console\n set output standard\n end\n end" # Disable paging command 32 | resetPagingCmd: "" # Reset paging command 33 | pagerPrompt: "" # DEPRECATED: This value is ignored 34 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 35 | saveConfig: "config system global\n set cfg-save automatic\n end\n" # Save configuration command 36 | exitCmd: "quit\n" # Exit command 37 | -------------------------------------------------------------------------------- /Checkpoint/CheckpointGaiaOS_NoEnable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## - Credit: christophe.jaming@vdndata.com 7 | 8 | main: 9 | name: "Checkpoint Gaia" # Template name for Checkpoint Gaia devices 10 | desc: "Checkpoint Gaia connection template" 11 | 12 | connect: 13 | timeout: 30 # Connection timeout (in seconds) 14 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 15 | port: 22 # Port number (range: 1–65535) 16 | 17 | auth: 18 | username: "login:" # CLI prompt for username 19 | password: "password:" # CLI prompt for password 20 | enable: off # Enable mode required? Set to 'on' or 'off' 21 | enableCmd: "expert" # Command to enter expert (privileged) mode 22 | enablePassPrmpt: "password:" # Prompt for expert mode password 23 | hpAnyKeyStatus: off # HP-style 'press any key' handling 24 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt for key press if applicable 25 | 26 | config: 27 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 28 | paging: on # Disable CLI paging by setting this to 'on' 29 | pagingCmd: "set clienv rows 0" # Command to disable paging 30 | resetPagingCmd: "set clienv rows 48" # Command to re-enable paging 31 | pagerPrompt: "" # DEPRECATED: This value is no longer used 32 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 33 | saveConfig: "save config" # Command to save configuration 34 | exitCmd: "quit" # Command to end session 35 | -------------------------------------------------------------------------------- /Cisco/ciscowlc-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Cisco WLC (8.3 tested)" # Template name for Cisco Wireless LAN Controller 9 | desc: "Cisco WLC (8.3 tested)" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | sshInteractive: yes # Enable interactive SSH mode 18 | username: "User:" # CLI prompt for username 19 | password: "Password:" # CLI prompt for password 20 | enable: off # Enable mode required? Set to 'on' or 'off' 21 | enableCmd: "enable" # Enable command (not used here) 22 | enablePassPrmpt: "Password:" # Prompt for enable password (not used here) 23 | hpAnyKeyStatus: off # HP-style 'press any key' handling 24 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if applicable 25 | 26 | config: 27 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 28 | paging: on # Disable CLI paging 29 | pagingCmd: "config paging disable" # Command to disable paging 30 | resetPagingCmd: "config paging enable" # Command to re-enable paging 31 | pagerPrompt: "" # DEPRECATED: This value is no longer used 32 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 33 | saveConfig: "save config \n\n" # Command to save configuration (extra linefeeds added) 34 | exitCmd: "logout" # Command to end session 35 | -------------------------------------------------------------------------------- /base/base.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Name of Template" # Template name (make it unique and descriptive) 9 | desc: "Long Description of Template" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: telnet # Connection protocol: 'telnet' or 'ssh' 14 | port: 23 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode (if used) 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: off # Set to 'on' to disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Optional: Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /vyos/vyos-ssh-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Vyos SSH No Enable" # Unique name/identifier for this template 9 | desc: "Vyos SSH No Enable" # Descriptive label shown in rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'telnet' or 'ssh' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is used 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' (for some vendors) 27 | paging: on # Disable CLI paging? Set 'on' or 'off' 28 | pagingCmd: "set terminal length 0" # Command to disable paging 29 | resetPagingCmd: "set terminal length 40" # Command to re-enable paging (optional) 30 | pagerPrompt: "" # DEPRECATED: This value is ignored 31 | pagerPromptCmd: " " # DEPRECATED: This value is ignored 32 | saveConfig: "save" # Command to save running config 33 | exitCmd: "exit" # Command to exit session 34 | -------------------------------------------------------------------------------- /Allied_Telesis/AlliedTelesis-SSH-Enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Allied Telesis - SSH - Enable" # Unique name for Allied Telesis devices 9 | desc: "Allied Telesis SSH based connection with enable mode" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 10 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: on # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Optional: Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Adtran/Adtran900_telnet.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Adtran900" # Unique name for this device template 9 | desc: "Adtran 900 Series" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 15 # Connection timeout (in seconds) 13 | protocol: telnet # Connection protocol: 'telnet' or 'ssh' 14 | port: 23 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "" # Username prompt – leave blank to skip 18 | password: "Password:" # CLI prompt for password 19 | enable: on # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: off # Set to 'on' to disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Optional: Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "exit" # Command to end session 34 | -------------------------------------------------------------------------------- /Aruba/Aruba-S3500-SSH-enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "ArubaS3500 SSH enable" # Unique name for Aruba S3500 SSH connection 9 | desc: "ArubaS3500 SSH enable" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: on # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "no paging" # Command to disable paging 29 | resetPagingCmd: "" # Optional: Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "write memory" # Command to save running config 33 | exitCmd: "exit" # Command to end session 34 | -------------------------------------------------------------------------------- /Aruba/HP-A5120-SSH-NoSystem-View.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "HP-A5120-SSH-NOSystem-View" # Unique template name for HP A5120 without system-view 9 | desc: "HP-A5120-SSH-NOSystem-View" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "system-view" # Enable/privileged mode command 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "screen-length disable" # Command to disable paging 29 | resetPagingCmd: "undo screen-length " # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Adva/adva-ssh-no_enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Adva - SSH - no enable" # Unique name for this Adva device template 9 | desc: "Adva - SSH - no enable" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode (not used here) 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "\n" # Command to disable paging (noop in this case) 29 | resetPagingCmd: "\n" # Optional: Command to re-enable paging (noop here) 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Fortinet/fortigate-ssh-noenable-noninteractive.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | ## Fortigate Prompts should not include a regexp wildcard (.*) between the hostname and the #. in the UI 7 | ## Fortigate Use format: `hostname #` (no space or wildcard). 8 | ## If prompt contains $ make sure to escape it in the UI with a `\` backslash i.e. prompt\$ 9 | 10 | 11 | main: 12 | name: "Fortigate SSH no enable isNonInteractiveMode" 13 | desc: "Fortigate SSH no enable isNonInteractiveMode" 14 | 15 | connect: 16 | timeout: 5 # Connection timeout (in seconds). Long configs 30k+ lines need higher timeout value on Fortigates. 17 | protocol: ssh # Protocol: ssh 18 | port: 22 # Port number 19 | isNonInteractiveMode: true # SSH non-interactive mode 20 | 21 | auth: 22 | username: "Username:" # Username prompt 23 | password: "Password:" # Password prompt 24 | enable: off # Enable mode disabled 25 | enableCmd: "enable" # Enable command (not used) 26 | enablePassPrmpt: "Password:" # Enable password prompt (not used) 27 | hpAnyKeyStatus: off # 'Press any key' handling disabled 28 | hpAnyKeyPrmpt: "Press any key to continue" # Custom 'press any key' prompt 29 | 30 | config: 31 | linebreak: "n" # Linebreak format (default: 'n') 32 | paging: on # CLI paging enabled 33 | pagingCmd: " config system console\n set output standard\n end" # Disable paging command 34 | resetPagingCmd: "" # Reset paging command 35 | pagerPrompt: "" # DEPRECATED: This value is ignored 36 | pagerPromptCmd: "" # DEPRECATED: This value is ignored 37 | saveConfig: "config system global\n set cfg-save automatic\n end\n" # Save configuration command 38 | exitCmd: "quit\n" # Exit command 39 | -------------------------------------------------------------------------------- /Aruba/Aruba2930F-SSH-NoEnable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Aruba2930F SSH NoEnable" # Unique name for Aruba 2930F devices 9 | desc: "Aruba2930F SSH NoEnable" # Description shown in the rConfig UI 10 | 11 | connect: 12 | timeout: 5 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode (not used here) 21 | enablePassPrmpt: "Password:" # Prompt shown when enable password is requested 22 | hpAnyKeyStatus: on # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string for 'any key' confirmation 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "nno page" # Command to disable paging (verify typo 'nno') 29 | resetPagingCmd: "page" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "save" # Command to save running config 33 | exitCmd: "quit" # Command to end session 34 | -------------------------------------------------------------------------------- /Mikrotik/README.md: -------------------------------------------------------------------------------- 1 | 2 | # Mikrotik Support 3 | 4 | Mikrotik devices require some special configurations to work with rConfig due to the peculiar nature of their CLI implementation. 5 | 6 | > mikrotek-ssh-noenable_v2.yml - Fully tested and supported on rConfig v6 7 | 8 | 1. The device username must have '+cte' appended to it i.e. ```admin+cte```. This is in all cases. See vendor information here [https://wiki.mikrotik.com/wiki/Manual:Console_login_process#Console_login_options](https://wiki.mikrotik.com/wiki/Manual:Console_login_process#Console_login_options) 9 | 10 | 2. The template, per example in this repo, must have the command per below in the Config section. Please use the updated *mikrotik-ssh-noenable_v2.yml* template first. This template has been validated in our lab. If this fails, fall back to the original template. 11 | 12 | 3. When adding the device in rConfig, Core or Professional, please input a prompt in the 'Main Prompt' field, but this actually not used. Again, due to the peculiar nature of their CLI implementation, rConfig actually strips out the prompt. rConfig waits for the template timeout to send the next command to the device. 13 | 14 | 4. The default timeout on the template is 10 seconds. This will be suitable for most deployments. You may need to adjust up for longer configs, or down if you want the download jobs to complete faster. 15 | 16 | The specific command for Mikrotik devices, in the v2 template is below. 17 | 18 | ```php 19 | # Set device type to Mikrotik for special download instructions 20 | isMikrotik: yes 21 | ``` 22 | 23 | 24 | Information below related to *mikrotik-ssh-noenable.yml* - which is not the preferred template for Mikrotik RouterOS based devices. 25 | 26 | Some commands issued to a terminal may yield ANSI escape codes. eg. ^[[H. These provide the terminal with information on the formating of the characters and their positioning. 27 | Set connection to use ANSI decoded for older VT100 term emulator based consoles such as HP switches. 28 | ```sh 29 | # Set SSH connection to set AnsiHost connection for VT100 type connections 30 | AnsiHost: "yes" 31 | ``` 32 | 33 | Sets the number of columns and rows for the terminal window size. setWindowSize(int $columns = 80, int $rows = 24) 34 | ```sh 35 | # Sets the number of columns and rows for the terminal window size 36 | setWindowSize: [240, 2048] 37 | ``` 38 | -------------------------------------------------------------------------------- /Calix/calix-axos-ssh-no_enable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Calix AXOS - SSH - No Enable" # Template name for Calix AXOS devices 9 | desc: "Calix AXOS SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 30 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'ssh' or 'telnet' 14 | port: 22 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Username:" # CLI prompt for username 18 | password: "Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Enable command (not used here) 21 | enablePassPrmpt: "Password:" # Prompt for enable password (not used here) 22 | hpAnyKeyStatus: off # HP-style 'press any key' handling 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt if hpAnyKeyStatus is enabled 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Disable paging? 'on' disables it, 'off' keeps it 28 | pagingCmd: "paginate false" # Command to disable paging 29 | resetPagingCmd: "paginate true" # Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "wr mem" # Command to save running configuration 33 | exitCmd: "quit" # Command to end the session 34 | 35 | options: 36 | AnsiHost: "no" # AnsiHost used for certain terminal sessions 37 | setWindowSize: [160, 2048] # Optional: terminal window size (columns, rows) 38 | -------------------------------------------------------------------------------- /Avaya/avaya-swtich-vector-ssh.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Avaya - SSH - No Enable" # Template name for Avaya device 9 | desc: "Avaya - SSH based connection without enable mode" 10 | 11 | connect: 12 | timeout: 60 # Connection timeout (in seconds) 13 | protocol: ssh # Connection protocol: 'telnet' or 'ssh' 14 | port: 22 # Port number (range: 1–65535) 15 | ctrlYLogin: on 16 | 17 | auth: 18 | username: "Enter Username:" # CLI prompt for username 19 | password: "Enter Password:" # CLI prompt for password 20 | enable: off # Enable mode required? Set to 'on' or 'off' 21 | enableCmd: "enable" # Command to enter enable mode (not used here) 22 | enablePassPrmpt: "Password:" # Prompt for enable password (if used) 23 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 24 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 25 | 26 | config: 27 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 28 | paging: on # Set to 'on' to disable CLI paging 29 | pagingCmd: "terminal length 0" # Command to disable paging 30 | resetPagingCmd: "terminal length 40" # Optional: Command to re-enable paging 31 | pagerPrompt: "" # DEPRECATED: This value is no longer used 32 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 33 | saveConfig: "copy config nvram" # Command to save configuration 34 | exitCmd: "exit" # Command to end session 35 | 36 | vt100: 37 | hasSplashScreen: "on" # VT100 splash screen detection enabled 38 | splashScreenReadToText: "008" # Wait for this string before proceeding 39 | splashScreenSendControlCode: "\x19" # Control character to send after splash 40 | -------------------------------------------------------------------------------- /Avaya/avaya-4526gtx-telnet-noenable.yml: -------------------------------------------------------------------------------- 1 | # rConfig connection template – DO NOT EDIT DIRECTLY 2 | ## Template Notes: 3 | ## - All free text values must be wrapped in double quotes: " " 4 | ## - Documentation: https://docs.rconfig.com/devices/templates/ 5 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 6 | 7 | main: 8 | name: "Avaya 4526GTX - TELNET - No Enable" # Template name for Avaya 4526GTX device 9 | desc: "Avaya 4526GTX - TELNET based connection without enable mode" 10 | 11 | connect: 12 | timeout: 60 # Connection timeout (in seconds) 13 | protocol: telnet # Connection protocol: 'telnet' or 'ssh' 14 | port: 23 # Port number (range: 1–65535) 15 | 16 | auth: 17 | username: "Enter Username:" # CLI prompt for username 18 | password: "Enter Password:" # CLI prompt for password 19 | enable: off # Enable mode required? Set to 'on' or 'off' 20 | enableCmd: "enable" # Command to enter enable mode (not used here) 21 | enablePassPrmpt: "Password:" # Prompt for enable password (if used) 22 | hpAnyKeyStatus: off # For HP-style 'press any key' prompts: 'on' or 'off' 23 | hpAnyKeyPrmpt: "Press any key to continue" # Prompt string if hpAnyKeyStatus is on 24 | 25 | config: 26 | linebreak: "n" # Linebreak type: 'n' (default) or 'r' 27 | paging: on # Set to 'on' to disable CLI paging 28 | pagingCmd: "terminal length 0" # Command to disable paging 29 | resetPagingCmd: "terminal length 40" # Optional: Command to re-enable paging 30 | pagerPrompt: "" # DEPRECATED: This value is no longer used 31 | pagerPromptCmd: " " # DEPRECATED: This value is no longer used 32 | saveConfig: "copy config nvram" # Command to save configuration 33 | exitCmd: "exit" # Command to end session 34 | 35 | vt100: 36 | hasSplashScreen: "on" # VT100 splash screen detection enabled 37 | splashScreenReadToText: "008" # Wait for this string before proceeding 38 | splashScreenSendControlCode: "\x19" # Control character to send after splash 39 | -------------------------------------------------------------------------------- /Palo_Alto_Networks/README.md: -------------------------------------------------------------------------------- 1 | 2 | # Palo Alto Networks Support 3 | 4 | Some Palo Alto devices require some special configurations to work with rConfig. 5 | 6 | NOTE: If there are any issues downloading from Palo Altos using this template (such as partial configs) try removing the entire 'Options:' section from the template. 7 | 8 | Some commands issued to a terminal may yield ANSI escape codes. eg. ^[[K. These provide the terminal with information on the formating of the characters and their positioning. 9 | Set connection to use ANSI decoded for older VT100 term emulator based consoles such as HP switches. 10 | ```sh 11 | # Set SSH connection to set AnsiHost connection for VT100 type connections 12 | AnsiHost: "yes" 13 | ``` 14 | 15 | Sets the number of columns and rows for the terminal window size. setTerminalDimensions(int $columns = 260, int $rows = 1000) 16 | ```sh 17 | # Sets the number of columns and rows for the terminal window size 18 | setTerminalDimensions: [260, 1000] 19 | ``` 20 | 21 | > panos-ssh-9x.yml - Fully tested and supported on rConfig v6 22 | 23 | For Palo Altos with very large configurations, you may need to increase the setTerminalDimensions 2nd value from 1000, to a value that represents the number of lines. We have seen increases up to 50000. If this value does need to be increased, you may need to increase the PHP server memory limit also to cope with the large downloads. 24 | 25 | The default memory limit is 256M, which is usually more than sufficient for most needs. If you need to raise this limit, you must edit the /etc/php.ini file. 26 | Find and update the following line. There are no hard recommendations, but if you have a server with 4GB of RAM, this can safely be increase to 2 (2048MB) or 3 GB (3072MB). If in doubt, contact rConfig support if you have a valid support agreement. 27 | 28 | ```bash 29 | memory_limit = 256M 30 | ``` 31 | 32 | Essentially, the best practice for v6 users is to use the attached SSH templates and enable your firewalls for SSH also. 33 | 34 | Other PA implementations require a special login sequence so an edit to the connection template enableCmd parameter is required. instead of the follow sequence, 35 | ```bash 36 | enable: off 37 | # set enable mode command. Must be in quotes 38 | enableCmd: "enable" 39 | ``` 40 | 41 | You may need to adjust this to 42 | ```bash 43 | # Set enable mode on or off 44 | enable: on 45 | # set enable mode command. Must be in quotes 46 | enableCmd: "set cli config-output-format set\nset cli pager off" 47 | ... 48 | paging: off 49 | ``` 50 | 51 | These approaches are fully tested and supported on rConfig v6. 52 | -------------------------------------------------------------------------------- /README-NONINTERACTIVEMODE-SSH.md: -------------------------------------------------------------------------------- 1 | Sure thing! Here’s the content converted to GitHub-styled markdown: 2 | 3 | --- 4 | 5 | # rConfig: SSH Non-Interactive Shell for Configuration Retrieval 6 | 7 | ## Overview 8 | 9 | As of the update (Date: 21/11/2024), a new SSH non-interactive mode has been introduced in rConfig, designed to streamline the process of retrieving configurations from devices. This feature is now available in the following versions: 10 | 11 | - **rConfig V6 Core** (installed or updated after 21/11/2024) 12 | - **rConfig V7 (7.2.9) and beyond** 13 | 14 | The new template flag, called **NonInteractive**, is available to be used across supported versions of rConfig. This feature enables the use of a non-interactive type SSH shell, which enhances efficiency when retrieving configurations, particularly in scenarios where manual input prompts are undesirable or unfeasible. 15 | 16 | ## How to Use the Non-Interactive Shell 17 | 18 | The new non-interactive shell mode can be configured in the rConfig configuration file by setting the `isNonInteractiveMode` flag. By default, this flag is set to `false` or is not required at all, but users can enable or disable the feature as required. 19 | 20 | ### Configuration Example 21 | 22 | ```yaml 23 | # Set SSH non-interactive mode on or off 24 | isNonInteractiveMode: true 25 | ``` 26 | 27 | - `true` (without quotes): Enables non-interactive mode for SSH connections. 28 | - `false` (without quotes): Disables non-interactive mode, defaulting back to interactive connections. 29 | 30 | To enable or disable the non-interactive mode, simply modify the value of `isNonInteractiveMode` to `true` or `false`, and save the configuration file. Ensure the values are specified **without quotes** to avoid parsing errors. 31 | 32 | See example here [https://github.com/rconfig/rConfig-templates/blob/master/Fortinet/fortigate-ssh-noenable-noninteractive.yml](https://github.com/rconfig/rConfig-templates/blob/master/Fortinet/fortigate-ssh-noenable-noninteractive.yml) 33 | 34 | Mikrotiks, Fortinets and some Ciscos have been tested. Please feedback on your tests. 35 | 36 | ## Benefits of Using SSH Non-Interactive Mode 37 | 38 | - **Improved Automation**: Non-interactive mode allows the SSH client to automatically manage connections without expecting user intervention. This is particularly beneficial when running scheduled or automated configuration retrievals, minimizing manual overhead. 39 | 40 | - **Reduced Complexity**: For routine configuration retrieval, non-interactive mode simplifies the process, making it more predictable and easier to script. This makes rConfig an even more powerful tool for handling large-scale networks with frequent config changes. 41 | 42 | - **Faster Config Retrieval**: By removing the need for prompts during SSH sessions, non-interactive mode can speed up the process of retrieving configurations from multiple devices, which is ideal for larger networks. 43 | 44 | ## Compatibility and Future-Proofing 45 | 46 | While non-interactive mode is preferred for retrieving device configurations efficiently, users may still need to configure the device in both versions of rConfig (Core and Pro). This ensures compatibility for future use cases, such as sending configuration snippets or managing more interactive workflows that require user confirmation. 47 | 48 | In these cases, configuring devices with both interactive and non-interactive capabilities guarantees greater flexibility, particularly when network environments or requirements evolve over time. 49 | 50 | ## Setting Up Non-Interactive Mode 51 | 52 | 1. **Edit Configuration**: Locate the configuration file for your version of rConfig, and find the entry for `isNonInteractiveMode`. 53 | 2. **Set the Flag**: Update the value to `true` or `false` depending on your requirements. Remember, there should be no quotes around `true` or `false`. 54 | 3. **Save Changes**: Save the configuration file and restart rConfig if necessary for the changes to take effect. 55 | 56 | ### Example 57 | 58 | ```yaml 59 | isNonInteractiveMode: false 60 | ``` 61 | 62 | This line in the configuration will disable non-interactive mode, keeping the default interactive SSH shell behavior. 63 | 64 | ## Conclusion 65 | 66 | The introduction of SSH non-interactive mode in rConfig adds significant flexibility and efficiency for configuration retrieval. By enabling automated, streamlined SSH sessions, this feature empowers network administrators to manage configurations more effectively across a large array of devices. For those looking to send configuration snippets in the future, maintaining the ability to configure devices in both interactive and non-interactive modes ensures adaptability as network management needs evolve. 67 | 68 | --- 69 | 70 | Let me know if you need any tweaks or if there's anything else I can help with! 😊 -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | 2 | 3 |
4 |
5 | 6 | rConfig Logo 7 | 8 | 9 |

rConfig - Templates

10 | 11 | 12 |

13 | Vendors Badge 14 |

15 | 16 |

17 | This repository stores community-submitted connection templates for use with rConfig, including templates for SSH, Telnet, and Script-based device integrations. 18 |

19 |
20 |
21 | 22 |
23 | 24 | ### 🔗 Docs & Contribution 25 | - 📚 Documentation: [Script Integration Engine (SIE)](https://docs.rconfig.com/integrations/script-integration-engine/sie/) 26 | - 🤝 Submit or browse templates: [rConfig-templates GitHub](https://github.com/rconfig/rConfig-templates) 27 | 28 |
29 | 30 | ## File Structure & Naming Convention 31 | 32 | Each template must reside in a directory named after the device vendor: 33 | 34 | ``` 35 | /cisco/cisco-ios-ssh-enable.yml 36 | /hp/hp-procurve-telnet-noenable.yml 37 | ``` 38 | 39 | **File naming format**: 40 | ```text 41 | vendorName-modelName-connectionType-enableMode.yml 42 | ``` 43 | **Example**: 44 | ```text 45 | cisco-ios-ssh-enable.yml 46 | hp-1920-telnet-noenable.yml 47 | ``` 48 | 49 | --- 50 | 51 | ## YAML Structure & Descriptors 52 | 53 | Each template **must** start with the following docblock: 54 | ```yaml 55 | # rConfig connection template – DO NOT EDIT DIRECTLY 56 | ## Template Notes: 57 | ## - All free text values must be wrapped in double quotes: " " 58 | ## - Documentation: https://docs.rconfig.com/integrations/script-integration-engine/sie/ 59 | ## - Community templates and contributions: https://github.com/rconfig/rConfig-templates 60 | ``` 61 | 62 | --- 63 | 64 | ### `main:` 65 | Defines the template's label and a brief description. 66 | ```yaml 67 | main: 68 | name: "Cisco IOS - SSH - Enable" 69 | desc: "Cisco IOS SSH based connection with enable mode" 70 | ``` 71 | 72 | --- 73 | 74 | ### `connect:` 75 | Defines how rConfig connects to the device. 76 | ```yaml 77 | connect: 78 | timeout: 60 # Seconds until connection timeout 79 | protocol: ssh # Protocol (ssh | telnet | script) 80 | port: 22 # Port number (1-65535) 81 | isNonInteractiveMode: true # (Optional) Set true for non-interactive SSH 82 | ``` 83 | 84 | --- 85 | 86 | ### `auth:` 87 | Defines authentication and optional elevation behavior. 88 | ```yaml 89 | auth: 90 | username: "Username:" # Username prompt 91 | password: "Password:" # Password prompt 92 | enable: on # Enable mode: on | off 93 | enableCmd: "enable" # Command to enter enable mode 94 | enablePassPrmpt: "Password:" # Enable password prompt 95 | hpAnyKeyStatus: off # Required for some HP devices 96 | hpAnyKeyPrmpt: "Press any key to continue" # 'Press any key' prompt 97 | ``` 98 | 99 | --- 100 | 101 | ### `config:` 102 | Commands related to paging, prompt handling, and session control. 103 | ```yaml 104 | config: 105 | linebreak: "n" # Command linebreak type: 'n' or 'r' 106 | paging: on # Disable device paging: on | off 107 | pagingCmd: "terminal length 0" # Command to disable paging 108 | resetPagingCmd: "terminal length 40" # Command to re-enable paging 109 | pagerPrompt: "" # Pager prompt (leave blank if not needed) 110 | pagerPromptCmd: "" # Keystroke to clear pager (leave blank if not needed) 111 | saveConfig: "wr mem" # Save config command 112 | exitCmd: "quit" # Exit session command 113 | ``` 114 | 115 | --- 116 | 117 | ### `options:` (Optional) 118 | Advanced settings, used primarily for legacy or VT100-based terminal environments. 119 | ```yaml 120 | options: 121 | AnsiHost: "yes" # Enable ANSI support for VT100 sessions 122 | setWindowSize: [240, 2048] # Terminal width and height 123 | setTerminalDimensions: [260, 1000] # ANSI screen dimensions 124 | ``` 125 | 126 | --- 127 | 128 | ## ✅ Submission Guidelines 129 | 130 | - ✅ Use consistent spacing and quotes for all free text fields. 131 | - ✅ Remove `pagerPrompt` and `pagerPromptCmd` if not required. 132 | - ❌ Do **not** include unused or commented-out keys. 133 | - ✅ Test templates before submitting. 134 | 135 | 136 | Thanks for helping grow the rConfig community! If you have questions or suggestions, feel free to [open an issue](https://github.com/rconfig/rConfig-templates/issues) or [join the discussion](https://rconfig.com/community/). 137 | 138 | 139 | Let me know if you'd like this in a `.md` file or if you're ready to update template validation scripts or directory structure too. 140 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | GNU GENERAL PUBLIC LICENSE 2 | Version 3, 29 June 2007 3 | 4 | Copyright (C) 2007 Free Software Foundation, Inc. 5 | Everyone is permitted to copy and distribute verbatim copies 6 | of this license document, but changing it is not allowed. 7 | 8 | Preamble 9 | 10 | The GNU General Public License is a free, copyleft license for 11 | software and other kinds of works. 12 | 13 | The licenses for most software and other practical works are designed 14 | to take away your freedom to share and change the works. By contrast, 15 | the GNU General Public License is intended to guarantee your freedom to 16 | share and change all versions of a program--to make sure it remains free 17 | software for all its users. We, the Free Software Foundation, use the 18 | GNU General Public License for most of our software; it applies also to 19 | any other work released this way by its authors. You can apply it to 20 | your programs, too. 21 | 22 | When we speak of free software, we are referring to freedom, not 23 | price. Our General Public Licenses are designed to make sure that you 24 | have the freedom to distribute copies of free software (and charge for 25 | them if you wish), that you receive source code or can get it if you 26 | want it, that you can change the software or use pieces of it in new 27 | free programs, and that you know you can do these things. 28 | 29 | To protect your rights, we need to prevent others from denying you 30 | these rights or asking you to surrender the rights. Therefore, you have 31 | certain responsibilities if you distribute copies of the software, or if 32 | you modify it: responsibilities to respect the freedom of others. 33 | 34 | For example, if you distribute copies of such a program, whether 35 | gratis or for a fee, you must pass on to the recipients the same 36 | freedoms that you received. You must make sure that they, too, receive 37 | or can get the source code. And you must show them these terms so they 38 | know their rights. 39 | 40 | Developers that use the GNU GPL protect your rights with two steps: 41 | (1) assert copyright on the software, and (2) offer you this License 42 | giving you legal permission to copy, distribute and/or modify it. 43 | 44 | For the developers' and authors' protection, the GPL clearly explains 45 | that there is no warranty for this free software. For both users' and 46 | authors' sake, the GPL requires that modified versions be marked as 47 | changed, so that their problems will not be attributed erroneously to 48 | authors of previous versions. 49 | 50 | Some devices are designed to deny users access to install or run 51 | modified versions of the software inside them, although the manufacturer 52 | can do so. This is fundamentally incompatible with the aim of 53 | protecting users' freedom to change the software. The systematic 54 | pattern of such abuse occurs in the area of products for individuals to 55 | use, which is precisely where it is most unacceptable. Therefore, we 56 | have designed this version of the GPL to prohibit the practice for those 57 | products. If such problems arise substantially in other domains, we 58 | stand ready to extend this provision to those domains in future versions 59 | of the GPL, as needed to protect the freedom of users. 60 | 61 | Finally, every program is threatened constantly by software patents. 62 | States should not allow patents to restrict development and use of 63 | software on general-purpose computers, but in those that do, we wish to 64 | avoid the special danger that patents applied to a free program could 65 | make it effectively proprietary. To prevent this, the GPL assures that 66 | patents cannot be used to render the program non-free. 67 | 68 | The precise terms and conditions for copying, distribution and 69 | modification follow. 70 | 71 | TERMS AND CONDITIONS 72 | 73 | 0. Definitions. 74 | 75 | "This License" refers to version 3 of the GNU General Public License. 76 | 77 | "Copyright" also means copyright-like laws that apply to other kinds of 78 | works, such as semiconductor masks. 79 | 80 | "The Program" refers to any copyrightable work licensed under this 81 | License. Each licensee is addressed as "you". "Licensees" and 82 | "recipients" may be individuals or organizations. 83 | 84 | To "modify" a work means to copy from or adapt all or part of the work 85 | in a fashion requiring copyright permission, other than the making of an 86 | exact copy. The resulting work is called a "modified version" of the 87 | earlier work or a work "based on" the earlier work. 88 | 89 | A "covered work" means either the unmodified Program or a work based 90 | on the Program. 91 | 92 | To "propagate" a work means to do anything with it that, without 93 | permission, would make you directly or secondarily liable for 94 | infringement under applicable copyright law, except executing it on a 95 | computer or modifying a private copy. Propagation includes copying, 96 | distribution (with or without modification), making available to the 97 | public, and in some countries other activities as well. 98 | 99 | To "convey" a work means any kind of propagation that enables other 100 | parties to make or receive copies. Mere interaction with a user through 101 | a computer network, with no transfer of a copy, is not conveying. 102 | 103 | An interactive user interface displays "Appropriate Legal Notices" 104 | to the extent that it includes a convenient and prominently visible 105 | feature that (1) displays an appropriate copyright notice, and (2) 106 | tells the user that there is no warranty for the work (except to the 107 | extent that warranties are provided), that licensees may convey the 108 | work under this License, and how to view a copy of this License. If 109 | the interface presents a list of user commands or options, such as a 110 | menu, a prominent item in the list meets this criterion. 111 | 112 | 1. Source Code. 113 | 114 | The "source code" for a work means the preferred form of the work 115 | for making modifications to it. "Object code" means any non-source 116 | form of a work. 117 | 118 | A "Standard Interface" means an interface that either is an official 119 | standard defined by a recognized standards body, or, in the case of 120 | interfaces specified for a particular programming language, one that 121 | is widely used among developers working in that language. 122 | 123 | The "System Libraries" of an executable work include anything, other 124 | than the work as a whole, that (a) is included in the normal form of 125 | packaging a Major Component, but which is not part of that Major 126 | Component, and (b) serves only to enable use of the work with that 127 | Major Component, or to implement a Standard Interface for which an 128 | implementation is available to the public in source code form. A 129 | "Major Component", in this context, means a major essential component 130 | (kernel, window system, and so on) of the specific operating system 131 | (if any) on which the executable work runs, or a compiler used to 132 | produce the work, or an object code interpreter used to run it. 133 | 134 | The "Corresponding Source" for a work in object code form means all 135 | the source code needed to generate, install, and (for an executable 136 | work) run the object code and to modify the work, including scripts to 137 | control those activities. However, it does not include the work's 138 | System Libraries, or general-purpose tools or generally available free 139 | programs which are used unmodified in performing those activities but 140 | which are not part of the work. For example, Corresponding Source 141 | includes interface definition files associated with source files for 142 | the work, and the source code for shared libraries and dynamically 143 | linked subprograms that the work is specifically designed to require, 144 | such as by intimate data communication or control flow between those 145 | subprograms and other parts of the work. 146 | 147 | The Corresponding Source need not include anything that users 148 | can regenerate automatically from other parts of the Corresponding 149 | Source. 150 | 151 | The Corresponding Source for a work in source code form is that 152 | same work. 153 | 154 | 2. Basic Permissions. 155 | 156 | All rights granted under this License are granted for the term of 157 | copyright on the Program, and are irrevocable provided the stated 158 | conditions are met. This License explicitly affirms your unlimited 159 | permission to run the unmodified Program. The output from running a 160 | covered work is covered by this License only if the output, given its 161 | content, constitutes a covered work. This License acknowledges your 162 | rights of fair use or other equivalent, as provided by copyright law. 163 | 164 | You may make, run and propagate covered works that you do not 165 | convey, without conditions so long as your license otherwise remains 166 | in force. You may convey covered works to others for the sole purpose 167 | of having them make modifications exclusively for you, or provide you 168 | with facilities for running those works, provided that you comply with 169 | the terms of this License in conveying all material for which you do 170 | not control copyright. Those thus making or running the covered works 171 | for you must do so exclusively on your behalf, under your direction 172 | and control, on terms that prohibit them from making any copies of 173 | your copyrighted material outside their relationship with you. 174 | 175 | Conveying under any other circumstances is permitted solely under 176 | the conditions stated below. Sublicensing is not allowed; section 10 177 | makes it unnecessary. 178 | 179 | 3. Protecting Users' Legal Rights From Anti-Circumvention Law. 180 | 181 | No covered work shall be deemed part of an effective technological 182 | measure under any applicable law fulfilling obligations under article 183 | 11 of the WIPO copyright treaty adopted on 20 December 1996, or 184 | similar laws prohibiting or restricting circumvention of such 185 | measures. 186 | 187 | When you convey a covered work, you waive any legal power to forbid 188 | circumvention of technological measures to the extent such circumvention 189 | is effected by exercising rights under this License with respect to 190 | the covered work, and you disclaim any intention to limit operation or 191 | modification of the work as a means of enforcing, against the work's 192 | users, your or third parties' legal rights to forbid circumvention of 193 | technological measures. 194 | 195 | 4. Conveying Verbatim Copies. 196 | 197 | You may convey verbatim copies of the Program's source code as you 198 | receive it, in any medium, provided that you conspicuously and 199 | appropriately publish on each copy an appropriate copyright notice; 200 | keep intact all notices stating that this License and any 201 | non-permissive terms added in accord with section 7 apply to the code; 202 | keep intact all notices of the absence of any warranty; and give all 203 | recipients a copy of this License along with the Program. 204 | 205 | You may charge any price or no price for each copy that you convey, 206 | and you may offer support or warranty protection for a fee. 207 | 208 | 5. Conveying Modified Source Versions. 209 | 210 | You may convey a work based on the Program, or the modifications to 211 | produce it from the Program, in the form of source code under the 212 | terms of section 4, provided that you also meet all of these conditions: 213 | 214 | a) The work must carry prominent notices stating that you modified 215 | it, and giving a relevant date. 216 | 217 | b) The work must carry prominent notices stating that it is 218 | released under this License and any conditions added under section 219 | 7. This requirement modifies the requirement in section 4 to 220 | "keep intact all notices". 221 | 222 | c) You must license the entire work, as a whole, under this 223 | License to anyone who comes into possession of a copy. This 224 | License will therefore apply, along with any applicable section 7 225 | additional terms, to the whole of the work, and all its parts, 226 | regardless of how they are packaged. This License gives no 227 | permission to license the work in any other way, but it does not 228 | invalidate such permission if you have separately received it. 229 | 230 | d) If the work has interactive user interfaces, each must display 231 | Appropriate Legal Notices; however, if the Program has interactive 232 | interfaces that do not display Appropriate Legal Notices, your 233 | work need not make them do so. 234 | 235 | A compilation of a covered work with other separate and independent 236 | works, which are not by their nature extensions of the covered work, 237 | and which are not combined with it such as to form a larger program, 238 | in or on a volume of a storage or distribution medium, is called an 239 | "aggregate" if the compilation and its resulting copyright are not 240 | used to limit the access or legal rights of the compilation's users 241 | beyond what the individual works permit. Inclusion of a covered work 242 | in an aggregate does not cause this License to apply to the other 243 | parts of the aggregate. 244 | 245 | 6. Conveying Non-Source Forms. 246 | 247 | You may convey a covered work in object code form under the terms 248 | of sections 4 and 5, provided that you also convey the 249 | machine-readable Corresponding Source under the terms of this License, 250 | in one of these ways: 251 | 252 | a) Convey the object code in, or embodied in, a physical product 253 | (including a physical distribution medium), accompanied by the 254 | Corresponding Source fixed on a durable physical medium 255 | customarily used for software interchange. 256 | 257 | b) Convey the object code in, or embodied in, a physical product 258 | (including a physical distribution medium), accompanied by a 259 | written offer, valid for at least three years and valid for as 260 | long as you offer spare parts or customer support for that product 261 | model, to give anyone who possesses the object code either (1) a 262 | copy of the Corresponding Source for all the software in the 263 | product that is covered by this License, on a durable physical 264 | medium customarily used for software interchange, for a price no 265 | more than your reasonable cost of physically performing this 266 | conveying of source, or (2) access to copy the 267 | Corresponding Source from a network server at no charge. 268 | 269 | c) Convey individual copies of the object code with a copy of the 270 | written offer to provide the Corresponding Source. This 271 | alternative is allowed only occasionally and noncommercially, and 272 | only if you received the object code with such an offer, in accord 273 | with subsection 6b. 274 | 275 | d) Convey the object code by offering access from a designated 276 | place (gratis or for a charge), and offer equivalent access to the 277 | Corresponding Source in the same way through the same place at no 278 | further charge. You need not require recipients to copy the 279 | Corresponding Source along with the object code. If the place to 280 | copy the object code is a network server, the Corresponding Source 281 | may be on a different server (operated by you or a third party) 282 | that supports equivalent copying facilities, provided you maintain 283 | clear directions next to the object code saying where to find the 284 | Corresponding Source. Regardless of what server hosts the 285 | Corresponding Source, you remain obligated to ensure that it is 286 | available for as long as needed to satisfy these requirements. 287 | 288 | e) Convey the object code using peer-to-peer transmission, provided 289 | you inform other peers where the object code and Corresponding 290 | Source of the work are being offered to the general public at no 291 | charge under subsection 6d. 292 | 293 | A separable portion of the object code, whose source code is excluded 294 | from the Corresponding Source as a System Library, need not be 295 | included in conveying the object code work. 296 | 297 | A "User Product" is either (1) a "consumer product", which means any 298 | tangible personal property which is normally used for personal, family, 299 | or household purposes, or (2) anything designed or sold for incorporation 300 | into a dwelling. In determining whether a product is a consumer product, 301 | doubtful cases shall be resolved in favor of coverage. For a particular 302 | product received by a particular user, "normally used" refers to a 303 | typical or common use of that class of product, regardless of the status 304 | of the particular user or of the way in which the particular user 305 | actually uses, or expects or is expected to use, the product. A product 306 | is a consumer product regardless of whether the product has substantial 307 | commercial, industrial or non-consumer uses, unless such uses represent 308 | the only significant mode of use of the product. 309 | 310 | "Installation Information" for a User Product means any methods, 311 | procedures, authorization keys, or other information required to install 312 | and execute modified versions of a covered work in that User Product from 313 | a modified version of its Corresponding Source. The information must 314 | suffice to ensure that the continued functioning of the modified object 315 | code is in no case prevented or interfered with solely because 316 | modification has been made. 317 | 318 | If you convey an object code work under this section in, or with, or 319 | specifically for use in, a User Product, and the conveying occurs as 320 | part of a transaction in which the right of possession and use of the 321 | User Product is transferred to the recipient in perpetuity or for a 322 | fixed term (regardless of how the transaction is characterized), the 323 | Corresponding Source conveyed under this section must be accompanied 324 | by the Installation Information. But this requirement does not apply 325 | if neither you nor any third party retains the ability to install 326 | modified object code on the User Product (for example, the work has 327 | been installed in ROM). 328 | 329 | The requirement to provide Installation Information does not include a 330 | requirement to continue to provide support service, warranty, or updates 331 | for a work that has been modified or installed by the recipient, or for 332 | the User Product in which it has been modified or installed. Access to a 333 | network may be denied when the modification itself materially and 334 | adversely affects the operation of the network or violates the rules and 335 | protocols for communication across the network. 336 | 337 | Corresponding Source conveyed, and Installation Information provided, 338 | in accord with this section must be in a format that is publicly 339 | documented (and with an implementation available to the public in 340 | source code form), and must require no special password or key for 341 | unpacking, reading or copying. 342 | 343 | 7. Additional Terms. 344 | 345 | "Additional permissions" are terms that supplement the terms of this 346 | License by making exceptions from one or more of its conditions. 347 | Additional permissions that are applicable to the entire Program shall 348 | be treated as though they were included in this License, to the extent 349 | that they are valid under applicable law. If additional permissions 350 | apply only to part of the Program, that part may be used separately 351 | under those permissions, but the entire Program remains governed by 352 | this License without regard to the additional permissions. 353 | 354 | When you convey a copy of a covered work, you may at your option 355 | remove any additional permissions from that copy, or from any part of 356 | it. (Additional permissions may be written to require their own 357 | removal in certain cases when you modify the work.) You may place 358 | additional permissions on material, added by you to a covered work, 359 | for which you have or can give appropriate copyright permission. 360 | 361 | Notwithstanding any other provision of this License, for material you 362 | add to a covered work, you may (if authorized by the copyright holders of 363 | that material) supplement the terms of this License with terms: 364 | 365 | a) Disclaiming warranty or limiting liability differently from the 366 | terms of sections 15 and 16 of this License; or 367 | 368 | b) Requiring preservation of specified reasonable legal notices or 369 | author attributions in that material or in the Appropriate Legal 370 | Notices displayed by works containing it; or 371 | 372 | c) Prohibiting misrepresentation of the origin of that material, or 373 | requiring that modified versions of such material be marked in 374 | reasonable ways as different from the original version; or 375 | 376 | d) Limiting the use for publicity purposes of names of licensors or 377 | authors of the material; or 378 | 379 | e) Declining to grant rights under trademark law for use of some 380 | trade names, trademarks, or service marks; or 381 | 382 | f) Requiring indemnification of licensors and authors of that 383 | material by anyone who conveys the material (or modified versions of 384 | it) with contractual assumptions of liability to the recipient, for 385 | any liability that these contractual assumptions directly impose on 386 | those licensors and authors. 387 | 388 | All other non-permissive additional terms are considered "further 389 | restrictions" within the meaning of section 10. If the Program as you 390 | received it, or any part of it, contains a notice stating that it is 391 | governed by this License along with a term that is a further 392 | restriction, you may remove that term. If a license document contains 393 | a further restriction but permits relicensing or conveying under this 394 | License, you may add to a covered work material governed by the terms 395 | of that license document, provided that the further restriction does 396 | not survive such relicensing or conveying. 397 | 398 | If you add terms to a covered work in accord with this section, you 399 | must place, in the relevant source files, a statement of the 400 | additional terms that apply to those files, or a notice indicating 401 | where to find the applicable terms. 402 | 403 | Additional terms, permissive or non-permissive, may be stated in the 404 | form of a separately written license, or stated as exceptions; 405 | the above requirements apply either way. 406 | 407 | 8. Termination. 408 | 409 | You may not propagate or modify a covered work except as expressly 410 | provided under this License. Any attempt otherwise to propagate or 411 | modify it is void, and will automatically terminate your rights under 412 | this License (including any patent licenses granted under the third 413 | paragraph of section 11). 414 | 415 | However, if you cease all violation of this License, then your 416 | license from a particular copyright holder is reinstated (a) 417 | provisionally, unless and until the copyright holder explicitly and 418 | finally terminates your license, and (b) permanently, if the copyright 419 | holder fails to notify you of the violation by some reasonable means 420 | prior to 60 days after the cessation. 421 | 422 | Moreover, your license from a particular copyright holder is 423 | reinstated permanently if the copyright holder notifies you of the 424 | violation by some reasonable means, this is the first time you have 425 | received notice of violation of this License (for any work) from that 426 | copyright holder, and you cure the violation prior to 30 days after 427 | your receipt of the notice. 428 | 429 | Termination of your rights under this section does not terminate the 430 | licenses of parties who have received copies or rights from you under 431 | this License. If your rights have been terminated and not permanently 432 | reinstated, you do not qualify to receive new licenses for the same 433 | material under section 10. 434 | 435 | 9. Acceptance Not Required for Having Copies. 436 | 437 | You are not required to accept this License in order to receive or 438 | run a copy of the Program. Ancillary propagation of a covered work 439 | occurring solely as a consequence of using peer-to-peer transmission 440 | to receive a copy likewise does not require acceptance. However, 441 | nothing other than this License grants you permission to propagate or 442 | modify any covered work. These actions infringe copyright if you do 443 | not accept this License. Therefore, by modifying or propagating a 444 | covered work, you indicate your acceptance of this License to do so. 445 | 446 | 10. Automatic Licensing of Downstream Recipients. 447 | 448 | Each time you convey a covered work, the recipient automatically 449 | receives a license from the original licensors, to run, modify and 450 | propagate that work, subject to this License. You are not responsible 451 | for enforcing compliance by third parties with this License. 452 | 453 | An "entity transaction" is a transaction transferring control of an 454 | organization, or substantially all assets of one, or subdividing an 455 | organization, or merging organizations. If propagation of a covered 456 | work results from an entity transaction, each party to that 457 | transaction who receives a copy of the work also receives whatever 458 | licenses to the work the party's predecessor in interest had or could 459 | give under the previous paragraph, plus a right to possession of the 460 | Corresponding Source of the work from the predecessor in interest, if 461 | the predecessor has it or can get it with reasonable efforts. 462 | 463 | You may not impose any further restrictions on the exercise of the 464 | rights granted or affirmed under this License. For example, you may 465 | not impose a license fee, royalty, or other charge for exercise of 466 | rights granted under this License, and you may not initiate litigation 467 | (including a cross-claim or counterclaim in a lawsuit) alleging that 468 | any patent claim is infringed by making, using, selling, offering for 469 | sale, or importing the Program or any portion of it. 470 | 471 | 11. Patents. 472 | 473 | A "contributor" is a copyright holder who authorizes use under this 474 | License of the Program or a work on which the Program is based. The 475 | work thus licensed is called the contributor's "contributor version". 476 | 477 | A contributor's "essential patent claims" are all patent claims 478 | owned or controlled by the contributor, whether already acquired or 479 | hereafter acquired, that would be infringed by some manner, permitted 480 | by this License, of making, using, or selling its contributor version, 481 | but do not include claims that would be infringed only as a 482 | consequence of further modification of the contributor version. For 483 | purposes of this definition, "control" includes the right to grant 484 | patent sublicenses in a manner consistent with the requirements of 485 | this License. 486 | 487 | Each contributor grants you a non-exclusive, worldwide, royalty-free 488 | patent license under the contributor's essential patent claims, to 489 | make, use, sell, offer for sale, import and otherwise run, modify and 490 | propagate the contents of its contributor version. 491 | 492 | In the following three paragraphs, a "patent license" is any express 493 | agreement or commitment, however denominated, not to enforce a patent 494 | (such as an express permission to practice a patent or covenant not to 495 | sue for patent infringement). To "grant" such a patent license to a 496 | party means to make such an agreement or commitment not to enforce a 497 | patent against the party. 498 | 499 | If you convey a covered work, knowingly relying on a patent license, 500 | and the Corresponding Source of the work is not available for anyone 501 | to copy, free of charge and under the terms of this License, through a 502 | publicly available network server or other readily accessible means, 503 | then you must either (1) cause the Corresponding Source to be so 504 | available, or (2) arrange to deprive yourself of the benefit of the 505 | patent license for this particular work, or (3) arrange, in a manner 506 | consistent with the requirements of this License, to extend the patent 507 | license to downstream recipients. "Knowingly relying" means you have 508 | actual knowledge that, but for the patent license, your conveying the 509 | covered work in a country, or your recipient's use of the covered work 510 | in a country, would infringe one or more identifiable patents in that 511 | country that you have reason to believe are valid. 512 | 513 | If, pursuant to or in connection with a single transaction or 514 | arrangement, you convey, or propagate by procuring conveyance of, a 515 | covered work, and grant a patent license to some of the parties 516 | receiving the covered work authorizing them to use, propagate, modify 517 | or convey a specific copy of the covered work, then the patent license 518 | you grant is automatically extended to all recipients of the covered 519 | work and works based on it. 520 | 521 | A patent license is "discriminatory" if it does not include within 522 | the scope of its coverage, prohibits the exercise of, or is 523 | conditioned on the non-exercise of one or more of the rights that are 524 | specifically granted under this License. You may not convey a covered 525 | work if you are a party to an arrangement with a third party that is 526 | in the business of distributing software, under which you make payment 527 | to the third party based on the extent of your activity of conveying 528 | the work, and under which the third party grants, to any of the 529 | parties who would receive the covered work from you, a discriminatory 530 | patent license (a) in connection with copies of the covered work 531 | conveyed by you (or copies made from those copies), or (b) primarily 532 | for and in connection with specific products or compilations that 533 | contain the covered work, unless you entered into that arrangement, 534 | or that patent license was granted, prior to 28 March 2007. 535 | 536 | Nothing in this License shall be construed as excluding or limiting 537 | any implied license or other defenses to infringement that may 538 | otherwise be available to you under applicable patent law. 539 | 540 | 12. No Surrender of Others' Freedom. 541 | 542 | If conditions are imposed on you (whether by court order, agreement or 543 | otherwise) that contradict the conditions of this License, they do not 544 | excuse you from the conditions of this License. If you cannot convey a 545 | covered work so as to satisfy simultaneously your obligations under this 546 | License and any other pertinent obligations, then as a consequence you may 547 | not convey it at all. For example, if you agree to terms that obligate you 548 | to collect a royalty for further conveying from those to whom you convey 549 | the Program, the only way you could satisfy both those terms and this 550 | License would be to refrain entirely from conveying the Program. 551 | 552 | 13. Use with the GNU Affero General Public License. 553 | 554 | Notwithstanding any other provision of this License, you have 555 | permission to link or combine any covered work with a work licensed 556 | under version 3 of the GNU Affero General Public License into a single 557 | combined work, and to convey the resulting work. The terms of this 558 | License will continue to apply to the part which is the covered work, 559 | but the special requirements of the GNU Affero General Public License, 560 | section 13, concerning interaction through a network will apply to the 561 | combination as such. 562 | 563 | 14. Revised Versions of this License. 564 | 565 | The Free Software Foundation may publish revised and/or new versions of 566 | the GNU General Public License from time to time. Such new versions will 567 | be similar in spirit to the present version, but may differ in detail to 568 | address new problems or concerns. 569 | 570 | Each version is given a distinguishing version number. If the 571 | Program specifies that a certain numbered version of the GNU General 572 | Public License "or any later version" applies to it, you have the 573 | option of following the terms and conditions either of that numbered 574 | version or of any later version published by the Free Software 575 | Foundation. If the Program does not specify a version number of the 576 | GNU General Public License, you may choose any version ever published 577 | by the Free Software Foundation. 578 | 579 | If the Program specifies that a proxy can decide which future 580 | versions of the GNU General Public License can be used, that proxy's 581 | public statement of acceptance of a version permanently authorizes you 582 | to choose that version for the Program. 583 | 584 | Later license versions may give you additional or different 585 | permissions. However, no additional obligations are imposed on any 586 | author or copyright holder as a result of your choosing to follow a 587 | later version. 588 | 589 | 15. Disclaimer of Warranty. 590 | 591 | THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY 592 | APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT 593 | HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY 594 | OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 595 | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 596 | PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM 597 | IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF 598 | ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 599 | 600 | 16. Limitation of Liability. 601 | 602 | IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING 603 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS 604 | THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY 605 | GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 606 | USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 607 | DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD 608 | PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 609 | EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 610 | SUCH DAMAGES. 611 | 612 | 17. Interpretation of Sections 15 and 16. 613 | 614 | If the disclaimer of warranty and limitation of liability provided 615 | above cannot be given local legal effect according to their terms, 616 | reviewing courts shall apply local law that most closely approximates 617 | an absolute waiver of all civil liability in connection with the 618 | Program, unless a warranty or assumption of liability accompanies a 619 | copy of the Program in return for a fee. 620 | 621 | END OF TERMS AND CONDITIONS 622 | 623 | How to Apply These Terms to Your New Programs 624 | 625 | If you develop a new program, and you want it to be of the greatest 626 | possible use to the public, the best way to achieve this is to make it 627 | free software which everyone can redistribute and change under these terms. 628 | 629 | To do so, attach the following notices to the program. It is safest 630 | to attach them to the start of each source file to most effectively 631 | state the exclusion of warranty; and each file should have at least 632 | the "copyright" line and a pointer to where the full notice is found. 633 | 634 | {one line to give the program's name and a brief idea of what it does.} 635 | Copyright (C) {year} {name of author} 636 | 637 | This program is free software: you can redistribute it and/or modify 638 | it under the terms of the GNU General Public License as published by 639 | the Free Software Foundation, either version 3 of the License, or 640 | (at your option) any later version. 641 | 642 | This program is distributed in the hope that it will be useful, 643 | but WITHOUT ANY WARRANTY; without even the implied warranty of 644 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 645 | GNU General Public License for more details. 646 | 647 | You should have received a copy of the GNU General Public License 648 | along with this program. If not, see . 649 | 650 | Also add information on how to contact you by electronic and paper mail. 651 | 652 | If the program does terminal interaction, make it output a short 653 | notice like this when it starts in an interactive mode: 654 | 655 | {project} Copyright (C) {year} {fullname} 656 | This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 657 | This is free software, and you are welcome to redistribute it 658 | under certain conditions; type `show c' for details. 659 | 660 | The hypothetical commands `show w' and `show c' should show the appropriate 661 | parts of the General Public License. Of course, your program's commands 662 | might be different; for a GUI interface, you would use an "about box". 663 | 664 | You should also get your employer (if you work as a programmer) or school, 665 | if any, to sign a "copyright disclaimer" for the program, if necessary. 666 | For more information on this, and how to apply and follow the GNU GPL, see 667 | . 668 | 669 | The GNU General Public License does not permit incorporating your program 670 | into proprietary programs. If your program is a subroutine library, you 671 | may consider it more useful to permit linking proprietary applications with 672 | the library. If this is what you want to do, use the GNU Lesser General 673 | Public License instead of this License. But first, please read 674 | . 675 | --------------------------------------------------------------------------------