├── .gitignore ├── LICENSE ├── README.md ├── clean.sh ├── configuration.nix ├── customKernel.config ├── encZFS.txt ├── exacteimage.nix ├── hardware-configuration.nix ├── list.sh ├── localsigner.nix ├── remove-from-store ├── suisseid-pkcs11.nix ├── swisssign-pin-entry.nix ├── swisssigner.nix ├── upgrade.sh ├── useStable.sh ├── useUnstable.sh └── useUnstableSmall.sh /.gitignore: -------------------------------------------------------------------------------- 1 | howto.txt 2 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | GNU GENERAL PUBLIC LICENSE 2 | Version 3, 29 June 2007 3 | 4 | Copyright (C) 2007 Free Software Foundation, Inc. 5 | Everyone is permitted to copy and distribute verbatim copies 6 | of this license document, but changing it is not allowed. 7 | 8 | Preamble 9 | 10 | The GNU General Public License is a free, copyleft license for 11 | software and other kinds of works. 12 | 13 | The licenses for most software and other practical works are designed 14 | to take away your freedom to share and change the works. By contrast, 15 | the GNU General Public License is intended to guarantee your freedom to 16 | share and change all versions of a program--to make sure it remains free 17 | software for all its users. We, the Free Software Foundation, use the 18 | GNU General Public License for most of our software; it applies also to 19 | any other work released this way by its authors. You can apply it to 20 | your programs, too. 21 | 22 | When we speak of free software, we are referring to freedom, not 23 | price. Our General Public Licenses are designed to make sure that you 24 | have the freedom to distribute copies of free software (and charge for 25 | them if you wish), that you receive source code or can get it if you 26 | want it, that you can change the software or use pieces of it in new 27 | free programs, and that you know you can do these things. 28 | 29 | To protect your rights, we need to prevent others from denying you 30 | these rights or asking you to surrender the rights. Therefore, you have 31 | certain responsibilities if you distribute copies of the software, or if 32 | you modify it: responsibilities to respect the freedom of others. 33 | 34 | For example, if you distribute copies of such a program, whether 35 | gratis or for a fee, you must pass on to the recipients the same 36 | freedoms that you received. You must make sure that they, too, receive 37 | or can get the source code. And you must show them these terms so they 38 | know their rights. 39 | 40 | Developers that use the GNU GPL protect your rights with two steps: 41 | (1) assert copyright on the software, and (2) offer you this License 42 | giving you legal permission to copy, distribute and/or modify it. 43 | 44 | For the developers' and authors' protection, the GPL clearly explains 45 | that there is no warranty for this free software. For both users' and 46 | authors' sake, the GPL requires that modified versions be marked as 47 | changed, so that their problems will not be attributed erroneously to 48 | authors of previous versions. 49 | 50 | Some devices are designed to deny users access to install or run 51 | modified versions of the software inside them, although the manufacturer 52 | can do so. This is fundamentally incompatible with the aim of 53 | protecting users' freedom to change the software. The systematic 54 | pattern of such abuse occurs in the area of products for individuals to 55 | use, which is precisely where it is most unacceptable. Therefore, we 56 | have designed this version of the GPL to prohibit the practice for those 57 | products. If such problems arise substantially in other domains, we 58 | stand ready to extend this provision to those domains in future versions 59 | of the GPL, as needed to protect the freedom of users. 60 | 61 | Finally, every program is threatened constantly by software patents. 62 | States should not allow patents to restrict development and use of 63 | software on general-purpose computers, but in those that do, we wish to 64 | avoid the special danger that patents applied to a free program could 65 | make it effectively proprietary. To prevent this, the GPL assures that 66 | patents cannot be used to render the program non-free. 67 | 68 | The precise terms and conditions for copying, distribution and 69 | modification follow. 70 | 71 | TERMS AND CONDITIONS 72 | 73 | 0. Definitions. 74 | 75 | "This License" refers to version 3 of the GNU General Public License. 76 | 77 | "Copyright" also means copyright-like laws that apply to other kinds of 78 | works, such as semiconductor masks. 79 | 80 | "The Program" refers to any copyrightable work licensed under this 81 | License. Each licensee is addressed as "you". "Licensees" and 82 | "recipients" may be individuals or organizations. 83 | 84 | To "modify" a work means to copy from or adapt all or part of the work 85 | in a fashion requiring copyright permission, other than the making of an 86 | exact copy. The resulting work is called a "modified version" of the 87 | earlier work or a work "based on" the earlier work. 88 | 89 | A "covered work" means either the unmodified Program or a work based 90 | on the Program. 91 | 92 | To "propagate" a work means to do anything with it that, without 93 | permission, would make you directly or secondarily liable for 94 | infringement under applicable copyright law, except executing it on a 95 | computer or modifying a private copy. Propagation includes copying, 96 | distribution (with or without modification), making available to the 97 | public, and in some countries other activities as well. 98 | 99 | To "convey" a work means any kind of propagation that enables other 100 | parties to make or receive copies. Mere interaction with a user through 101 | a computer network, with no transfer of a copy, is not conveying. 102 | 103 | An interactive user interface displays "Appropriate Legal Notices" 104 | to the extent that it includes a convenient and prominently visible 105 | feature that (1) displays an appropriate copyright notice, and (2) 106 | tells the user that there is no warranty for the work (except to the 107 | extent that warranties are provided), that licensees may convey the 108 | work under this License, and how to view a copy of this License. If 109 | the interface presents a list of user commands or options, such as a 110 | menu, a prominent item in the list meets this criterion. 111 | 112 | 1. Source Code. 113 | 114 | The "source code" for a work means the preferred form of the work 115 | for making modifications to it. "Object code" means any non-source 116 | form of a work. 117 | 118 | A "Standard Interface" means an interface that either is an official 119 | standard defined by a recognized standards body, or, in the case of 120 | interfaces specified for a particular programming language, one that 121 | is widely used among developers working in that language. 122 | 123 | The "System Libraries" of an executable work include anything, other 124 | than the work as a whole, that (a) is included in the normal form of 125 | packaging a Major Component, but which is not part of that Major 126 | Component, and (b) serves only to enable use of the work with that 127 | Major Component, or to implement a Standard Interface for which an 128 | implementation is available to the public in source code form. A 129 | "Major Component", in this context, means a major essential component 130 | (kernel, window system, and so on) of the specific operating system 131 | (if any) on which the executable work runs, or a compiler used to 132 | produce the work, or an object code interpreter used to run it. 133 | 134 | The "Corresponding Source" for a work in object code form means all 135 | the source code needed to generate, install, and (for an executable 136 | work) run the object code and to modify the work, including scripts to 137 | control those activities. However, it does not include the work's 138 | System Libraries, or general-purpose tools or generally available free 139 | programs which are used unmodified in performing those activities but 140 | which are not part of the work. For example, Corresponding Source 141 | includes interface definition files associated with source files for 142 | the work, and the source code for shared libraries and dynamically 143 | linked subprograms that the work is specifically designed to require, 144 | such as by intimate data communication or control flow between those 145 | subprograms and other parts of the work. 146 | 147 | The Corresponding Source need not include anything that users 148 | can regenerate automatically from other parts of the Corresponding 149 | Source. 150 | 151 | The Corresponding Source for a work in source code form is that 152 | same work. 153 | 154 | 2. Basic Permissions. 155 | 156 | All rights granted under this License are granted for the term of 157 | copyright on the Program, and are irrevocable provided the stated 158 | conditions are met. This License explicitly affirms your unlimited 159 | permission to run the unmodified Program. The output from running a 160 | covered work is covered by this License only if the output, given its 161 | content, constitutes a covered work. This License acknowledges your 162 | rights of fair use or other equivalent, as provided by copyright law. 163 | 164 | You may make, run and propagate covered works that you do not 165 | convey, without conditions so long as your license otherwise remains 166 | in force. You may convey covered works to others for the sole purpose 167 | of having them make modifications exclusively for you, or provide you 168 | with facilities for running those works, provided that you comply with 169 | the terms of this License in conveying all material for which you do 170 | not control copyright. Those thus making or running the covered works 171 | for you must do so exclusively on your behalf, under your direction 172 | and control, on terms that prohibit them from making any copies of 173 | your copyrighted material outside their relationship with you. 174 | 175 | Conveying under any other circumstances is permitted solely under 176 | the conditions stated below. Sublicensing is not allowed; section 10 177 | makes it unnecessary. 178 | 179 | 3. Protecting Users' Legal Rights From Anti-Circumvention Law. 180 | 181 | No covered work shall be deemed part of an effective technological 182 | measure under any applicable law fulfilling obligations under article 183 | 11 of the WIPO copyright treaty adopted on 20 December 1996, or 184 | similar laws prohibiting or restricting circumvention of such 185 | measures. 186 | 187 | When you convey a covered work, you waive any legal power to forbid 188 | circumvention of technological measures to the extent such circumvention 189 | is effected by exercising rights under this License with respect to 190 | the covered work, and you disclaim any intention to limit operation or 191 | modification of the work as a means of enforcing, against the work's 192 | users, your or third parties' legal rights to forbid circumvention of 193 | technological measures. 194 | 195 | 4. Conveying Verbatim Copies. 196 | 197 | You may convey verbatim copies of the Program's source code as you 198 | receive it, in any medium, provided that you conspicuously and 199 | appropriately publish on each copy an appropriate copyright notice; 200 | keep intact all notices stating that this License and any 201 | non-permissive terms added in accord with section 7 apply to the code; 202 | keep intact all notices of the absence of any warranty; and give all 203 | recipients a copy of this License along with the Program. 204 | 205 | You may charge any price or no price for each copy that you convey, 206 | and you may offer support or warranty protection for a fee. 207 | 208 | 5. Conveying Modified Source Versions. 209 | 210 | You may convey a work based on the Program, or the modifications to 211 | produce it from the Program, in the form of source code under the 212 | terms of section 4, provided that you also meet all of these conditions: 213 | 214 | a) The work must carry prominent notices stating that you modified 215 | it, and giving a relevant date. 216 | 217 | b) The work must carry prominent notices stating that it is 218 | released under this License and any conditions added under section 219 | 7. This requirement modifies the requirement in section 4 to 220 | "keep intact all notices". 221 | 222 | c) You must license the entire work, as a whole, under this 223 | License to anyone who comes into possession of a copy. This 224 | License will therefore apply, along with any applicable section 7 225 | additional terms, to the whole of the work, and all its parts, 226 | regardless of how they are packaged. This License gives no 227 | permission to license the work in any other way, but it does not 228 | invalidate such permission if you have separately received it. 229 | 230 | d) If the work has interactive user interfaces, each must display 231 | Appropriate Legal Notices; however, if the Program has interactive 232 | interfaces that do not display Appropriate Legal Notices, your 233 | work need not make them do so. 234 | 235 | A compilation of a covered work with other separate and independent 236 | works, which are not by their nature extensions of the covered work, 237 | and which are not combined with it such as to form a larger program, 238 | in or on a volume of a storage or distribution medium, is called an 239 | "aggregate" if the compilation and its resulting copyright are not 240 | used to limit the access or legal rights of the compilation's users 241 | beyond what the individual works permit. Inclusion of a covered work 242 | in an aggregate does not cause this License to apply to the other 243 | parts of the aggregate. 244 | 245 | 6. Conveying Non-Source Forms. 246 | 247 | You may convey a covered work in object code form under the terms 248 | of sections 4 and 5, provided that you also convey the 249 | machine-readable Corresponding Source under the terms of this License, 250 | in one of these ways: 251 | 252 | a) Convey the object code in, or embodied in, a physical product 253 | (including a physical distribution medium), accompanied by the 254 | Corresponding Source fixed on a durable physical medium 255 | customarily used for software interchange. 256 | 257 | b) Convey the object code in, or embodied in, a physical product 258 | (including a physical distribution medium), accompanied by a 259 | written offer, valid for at least three years and valid for as 260 | long as you offer spare parts or customer support for that product 261 | model, to give anyone who possesses the object code either (1) a 262 | copy of the Corresponding Source for all the software in the 263 | product that is covered by this License, on a durable physical 264 | medium customarily used for software interchange, for a price no 265 | more than your reasonable cost of physically performing this 266 | conveying of source, or (2) access to copy the 267 | Corresponding Source from a network server at no charge. 268 | 269 | c) Convey individual copies of the object code with a copy of the 270 | written offer to provide the Corresponding Source. This 271 | alternative is allowed only occasionally and noncommercially, and 272 | only if you received the object code with such an offer, in accord 273 | with subsection 6b. 274 | 275 | d) Convey the object code by offering access from a designated 276 | place (gratis or for a charge), and offer equivalent access to the 277 | Corresponding Source in the same way through the same place at no 278 | further charge. You need not require recipients to copy the 279 | Corresponding Source along with the object code. If the place to 280 | copy the object code is a network server, the Corresponding Source 281 | may be on a different server (operated by you or a third party) 282 | that supports equivalent copying facilities, provided you maintain 283 | clear directions next to the object code saying where to find the 284 | Corresponding Source. Regardless of what server hosts the 285 | Corresponding Source, you remain obligated to ensure that it is 286 | available for as long as needed to satisfy these requirements. 287 | 288 | e) Convey the object code using peer-to-peer transmission, provided 289 | you inform other peers where the object code and Corresponding 290 | Source of the work are being offered to the general public at no 291 | charge under subsection 6d. 292 | 293 | A separable portion of the object code, whose source code is excluded 294 | from the Corresponding Source as a System Library, need not be 295 | included in conveying the object code work. 296 | 297 | A "User Product" is either (1) a "consumer product", which means any 298 | tangible personal property which is normally used for personal, family, 299 | or household purposes, or (2) anything designed or sold for incorporation 300 | into a dwelling. In determining whether a product is a consumer product, 301 | doubtful cases shall be resolved in favor of coverage. For a particular 302 | product received by a particular user, "normally used" refers to a 303 | typical or common use of that class of product, regardless of the status 304 | of the particular user or of the way in which the particular user 305 | actually uses, or expects or is expected to use, the product. A product 306 | is a consumer product regardless of whether the product has substantial 307 | commercial, industrial or non-consumer uses, unless such uses represent 308 | the only significant mode of use of the product. 309 | 310 | "Installation Information" for a User Product means any methods, 311 | procedures, authorization keys, or other information required to install 312 | and execute modified versions of a covered work in that User Product from 313 | a modified version of its Corresponding Source. The information must 314 | suffice to ensure that the continued functioning of the modified object 315 | code is in no case prevented or interfered with solely because 316 | modification has been made. 317 | 318 | If you convey an object code work under this section in, or with, or 319 | specifically for use in, a User Product, and the conveying occurs as 320 | part of a transaction in which the right of possession and use of the 321 | User Product is transferred to the recipient in perpetuity or for a 322 | fixed term (regardless of how the transaction is characterized), the 323 | Corresponding Source conveyed under this section must be accompanied 324 | by the Installation Information. But this requirement does not apply 325 | if neither you nor any third party retains the ability to install 326 | modified object code on the User Product (for example, the work has 327 | been installed in ROM). 328 | 329 | The requirement to provide Installation Information does not include a 330 | requirement to continue to provide support service, warranty, or updates 331 | for a work that has been modified or installed by the recipient, or for 332 | the User Product in which it has been modified or installed. Access to a 333 | network may be denied when the modification itself materially and 334 | adversely affects the operation of the network or violates the rules and 335 | protocols for communication across the network. 336 | 337 | Corresponding Source conveyed, and Installation Information provided, 338 | in accord with this section must be in a format that is publicly 339 | documented (and with an implementation available to the public in 340 | source code form), and must require no special password or key for 341 | unpacking, reading or copying. 342 | 343 | 7. Additional Terms. 344 | 345 | "Additional permissions" are terms that supplement the terms of this 346 | License by making exceptions from one or more of its conditions. 347 | Additional permissions that are applicable to the entire Program shall 348 | be treated as though they were included in this License, to the extent 349 | that they are valid under applicable law. If additional permissions 350 | apply only to part of the Program, that part may be used separately 351 | under those permissions, but the entire Program remains governed by 352 | this License without regard to the additional permissions. 353 | 354 | When you convey a copy of a covered work, you may at your option 355 | remove any additional permissions from that copy, or from any part of 356 | it. (Additional permissions may be written to require their own 357 | removal in certain cases when you modify the work.) You may place 358 | additional permissions on material, added by you to a covered work, 359 | for which you have or can give appropriate copyright permission. 360 | 361 | Notwithstanding any other provision of this License, for material you 362 | add to a covered work, you may (if authorized by the copyright holders of 363 | that material) supplement the terms of this License with terms: 364 | 365 | a) Disclaiming warranty or limiting liability differently from the 366 | terms of sections 15 and 16 of this License; or 367 | 368 | b) Requiring preservation of specified reasonable legal notices or 369 | author attributions in that material or in the Appropriate Legal 370 | Notices displayed by works containing it; or 371 | 372 | c) Prohibiting misrepresentation of the origin of that material, or 373 | requiring that modified versions of such material be marked in 374 | reasonable ways as different from the original version; or 375 | 376 | d) Limiting the use for publicity purposes of names of licensors or 377 | authors of the material; or 378 | 379 | e) Declining to grant rights under trademark law for use of some 380 | trade names, trademarks, or service marks; or 381 | 382 | f) Requiring indemnification of licensors and authors of that 383 | material by anyone who conveys the material (or modified versions of 384 | it) with contractual assumptions of liability to the recipient, for 385 | any liability that these contractual assumptions directly impose on 386 | those licensors and authors. 387 | 388 | All other non-permissive additional terms are considered "further 389 | restrictions" within the meaning of section 10. If the Program as you 390 | received it, or any part of it, contains a notice stating that it is 391 | governed by this License along with a term that is a further 392 | restriction, you may remove that term. If a license document contains 393 | a further restriction but permits relicensing or conveying under this 394 | License, you may add to a covered work material governed by the terms 395 | of that license document, provided that the further restriction does 396 | not survive such relicensing or conveying. 397 | 398 | If you add terms to a covered work in accord with this section, you 399 | must place, in the relevant source files, a statement of the 400 | additional terms that apply to those files, or a notice indicating 401 | where to find the applicable terms. 402 | 403 | Additional terms, permissive or non-permissive, may be stated in the 404 | form of a separately written license, or stated as exceptions; 405 | the above requirements apply either way. 406 | 407 | 8. Termination. 408 | 409 | You may not propagate or modify a covered work except as expressly 410 | provided under this License. Any attempt otherwise to propagate or 411 | modify it is void, and will automatically terminate your rights under 412 | this License (including any patent licenses granted under the third 413 | paragraph of section 11). 414 | 415 | However, if you cease all violation of this License, then your 416 | license from a particular copyright holder is reinstated (a) 417 | provisionally, unless and until the copyright holder explicitly and 418 | finally terminates your license, and (b) permanently, if the copyright 419 | holder fails to notify you of the violation by some reasonable means 420 | prior to 60 days after the cessation. 421 | 422 | Moreover, your license from a particular copyright holder is 423 | reinstated permanently if the copyright holder notifies you of the 424 | violation by some reasonable means, this is the first time you have 425 | received notice of violation of this License (for any work) from that 426 | copyright holder, and you cure the violation prior to 30 days after 427 | your receipt of the notice. 428 | 429 | Termination of your rights under this section does not terminate the 430 | licenses of parties who have received copies or rights from you under 431 | this License. If your rights have been terminated and not permanently 432 | reinstated, you do not qualify to receive new licenses for the same 433 | material under section 10. 434 | 435 | 9. Acceptance Not Required for Having Copies. 436 | 437 | You are not required to accept this License in order to receive or 438 | run a copy of the Program. Ancillary propagation of a covered work 439 | occurring solely as a consequence of using peer-to-peer transmission 440 | to receive a copy likewise does not require acceptance. However, 441 | nothing other than this License grants you permission to propagate or 442 | modify any covered work. These actions infringe copyright if you do 443 | not accept this License. Therefore, by modifying or propagating a 444 | covered work, you indicate your acceptance of this License to do so. 445 | 446 | 10. Automatic Licensing of Downstream Recipients. 447 | 448 | Each time you convey a covered work, the recipient automatically 449 | receives a license from the original licensors, to run, modify and 450 | propagate that work, subject to this License. You are not responsible 451 | for enforcing compliance by third parties with this License. 452 | 453 | An "entity transaction" is a transaction transferring control of an 454 | organization, or substantially all assets of one, or subdividing an 455 | organization, or merging organizations. If propagation of a covered 456 | work results from an entity transaction, each party to that 457 | transaction who receives a copy of the work also receives whatever 458 | licenses to the work the party's predecessor in interest had or could 459 | give under the previous paragraph, plus a right to possession of the 460 | Corresponding Source of the work from the predecessor in interest, if 461 | the predecessor has it or can get it with reasonable efforts. 462 | 463 | You may not impose any further restrictions on the exercise of the 464 | rights granted or affirmed under this License. For example, you may 465 | not impose a license fee, royalty, or other charge for exercise of 466 | rights granted under this License, and you may not initiate litigation 467 | (including a cross-claim or counterclaim in a lawsuit) alleging that 468 | any patent claim is infringed by making, using, selling, offering for 469 | sale, or importing the Program or any portion of it. 470 | 471 | 11. Patents. 472 | 473 | A "contributor" is a copyright holder who authorizes use under this 474 | License of the Program or a work on which the Program is based. The 475 | work thus licensed is called the contributor's "contributor version". 476 | 477 | A contributor's "essential patent claims" are all patent claims 478 | owned or controlled by the contributor, whether already acquired or 479 | hereafter acquired, that would be infringed by some manner, permitted 480 | by this License, of making, using, or selling its contributor version, 481 | but do not include claims that would be infringed only as a 482 | consequence of further modification of the contributor version. For 483 | purposes of this definition, "control" includes the right to grant 484 | patent sublicenses in a manner consistent with the requirements of 485 | this License. 486 | 487 | Each contributor grants you a non-exclusive, worldwide, royalty-free 488 | patent license under the contributor's essential patent claims, to 489 | make, use, sell, offer for sale, import and otherwise run, modify and 490 | propagate the contents of its contributor version. 491 | 492 | In the following three paragraphs, a "patent license" is any express 493 | agreement or commitment, however denominated, not to enforce a patent 494 | (such as an express permission to practice a patent or covenant not to 495 | sue for patent infringement). To "grant" such a patent license to a 496 | party means to make such an agreement or commitment not to enforce a 497 | patent against the party. 498 | 499 | If you convey a covered work, knowingly relying on a patent license, 500 | and the Corresponding Source of the work is not available for anyone 501 | to copy, free of charge and under the terms of this License, through a 502 | publicly available network server or other readily accessible means, 503 | then you must either (1) cause the Corresponding Source to be so 504 | available, or (2) arrange to deprive yourself of the benefit of the 505 | patent license for this particular work, or (3) arrange, in a manner 506 | consistent with the requirements of this License, to extend the patent 507 | license to downstream recipients. "Knowingly relying" means you have 508 | actual knowledge that, but for the patent license, your conveying the 509 | covered work in a country, or your recipient's use of the covered work 510 | in a country, would infringe one or more identifiable patents in that 511 | country that you have reason to believe are valid. 512 | 513 | If, pursuant to or in connection with a single transaction or 514 | arrangement, you convey, or propagate by procuring conveyance of, a 515 | covered work, and grant a patent license to some of the parties 516 | receiving the covered work authorizing them to use, propagate, modify 517 | or convey a specific copy of the covered work, then the patent license 518 | you grant is automatically extended to all recipients of the covered 519 | work and works based on it. 520 | 521 | A patent license is "discriminatory" if it does not include within 522 | the scope of its coverage, prohibits the exercise of, or is 523 | conditioned on the non-exercise of one or more of the rights that are 524 | specifically granted under this License. You may not convey a covered 525 | work if you are a party to an arrangement with a third party that is 526 | in the business of distributing software, under which you make payment 527 | to the third party based on the extent of your activity of conveying 528 | the work, and under which the third party grants, to any of the 529 | parties who would receive the covered work from you, a discriminatory 530 | patent license (a) in connection with copies of the covered work 531 | conveyed by you (or copies made from those copies), or (b) primarily 532 | for and in connection with specific products or compilations that 533 | contain the covered work, unless you entered into that arrangement, 534 | or that patent license was granted, prior to 28 March 2007. 535 | 536 | Nothing in this License shall be construed as excluding or limiting 537 | any implied license or other defenses to infringement that may 538 | otherwise be available to you under applicable patent law. 539 | 540 | 12. No Surrender of Others' Freedom. 541 | 542 | If conditions are imposed on you (whether by court order, agreement or 543 | otherwise) that contradict the conditions of this License, they do not 544 | excuse you from the conditions of this License. If you cannot convey a 545 | covered work so as to satisfy simultaneously your obligations under this 546 | License and any other pertinent obligations, then as a consequence you may 547 | not convey it at all. For example, if you agree to terms that obligate you 548 | to collect a royalty for further conveying from those to whom you convey 549 | the Program, the only way you could satisfy both those terms and this 550 | License would be to refrain entirely from conveying the Program. 551 | 552 | 13. Use with the GNU Affero General Public License. 553 | 554 | Notwithstanding any other provision of this License, you have 555 | permission to link or combine any covered work with a work licensed 556 | under version 3 of the GNU Affero General Public License into a single 557 | combined work, and to convey the resulting work. The terms of this 558 | License will continue to apply to the part which is the covered work, 559 | but the special requirements of the GNU Affero General Public License, 560 | section 13, concerning interaction through a network will apply to the 561 | combination as such. 562 | 563 | 14. Revised Versions of this License. 564 | 565 | The Free Software Foundation may publish revised and/or new versions of 566 | the GNU General Public License from time to time. Such new versions will 567 | be similar in spirit to the present version, but may differ in detail to 568 | address new problems or concerns. 569 | 570 | Each version is given a distinguishing version number. If the 571 | Program specifies that a certain numbered version of the GNU General 572 | Public License "or any later version" applies to it, you have the 573 | option of following the terms and conditions either of that numbered 574 | version or of any later version published by the Free Software 575 | Foundation. If the Program does not specify a version number of the 576 | GNU General Public License, you may choose any version ever published 577 | by the Free Software Foundation. 578 | 579 | If the Program specifies that a proxy can decide which future 580 | versions of the GNU General Public License can be used, that proxy's 581 | public statement of acceptance of a version permanently authorizes you 582 | to choose that version for the Program. 583 | 584 | Later license versions may give you additional or different 585 | permissions. However, no additional obligations are imposed on any 586 | author or copyright holder as a result of your choosing to follow a 587 | later version. 588 | 589 | 15. Disclaimer of Warranty. 590 | 591 | THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY 592 | APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT 593 | HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY 594 | OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 595 | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 596 | PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM 597 | IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF 598 | ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 599 | 600 | 16. Limitation of Liability. 601 | 602 | IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING 603 | WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS 604 | THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY 605 | GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 606 | USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF 607 | DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD 608 | PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 609 | EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 610 | SUCH DAMAGES. 611 | 612 | 17. Interpretation of Sections 15 and 16. 613 | 614 | If the disclaimer of warranty and limitation of liability provided 615 | above cannot be given local legal effect according to their terms, 616 | reviewing courts shall apply local law that most closely approximates 617 | an absolute waiver of all civil liability in connection with the 618 | Program, unless a warranty or assumption of liability accompanies a 619 | copy of the Program in return for a fee. 620 | 621 | END OF TERMS AND CONDITIONS 622 | 623 | How to Apply These Terms to Your New Programs 624 | 625 | If you develop a new program, and you want it to be of the greatest 626 | possible use to the public, the best way to achieve this is to make it 627 | free software which everyone can redistribute and change under these terms. 628 | 629 | To do so, attach the following notices to the program. It is safest 630 | to attach them to the start of each source file to most effectively 631 | state the exclusion of warranty; and each file should have at least 632 | the "copyright" line and a pointer to where the full notice is found. 633 | 634 | {one line to give the program's name and a brief idea of what it does.} 635 | Copyright (C) {year} {name of author} 636 | 637 | This program is free software: you can redistribute it and/or modify 638 | it under the terms of the GNU General Public License as published by 639 | the Free Software Foundation, either version 3 of the License, or 640 | (at your option) any later version. 641 | 642 | This program is distributed in the hope that it will be useful, 643 | but WITHOUT ANY WARRANTY; without even the implied warranty of 644 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 645 | GNU General Public License for more details. 646 | 647 | You should have received a copy of the GNU General Public License 648 | along with this program. If not, see . 649 | 650 | Also add information on how to contact you by electronic and paper mail. 651 | 652 | If the program does terminal interaction, make it output a short 653 | notice like this when it starts in an interactive mode: 654 | 655 | {project} Copyright (C) {year} {fullname} 656 | This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 657 | This is free software, and you are welcome to redistribute it 658 | under certain conditions; type `show c' for details. 659 | 660 | The hypothetical commands `show w' and `show c' should show the appropriate 661 | parts of the General Public License. Of course, your program's commands 662 | might be different; for a GUI interface, you would use an "about box". 663 | 664 | You should also get your employer (if you work as a programmer) or school, 665 | if any, to sign a "copyright disclaimer" for the program, if necessary. 666 | For more information on this, and how to apply and follow the GNU GPL, see 667 | . 668 | 669 | The GNU General Public License does not permit incorporating your program 670 | into proprietary programs. If your program is a subroutine library, you 671 | may consider it more useful to permit linking proprietary applications with 672 | the library. If this is what you want to do, use the GNU Lesser General 673 | Public License instead of this License. But first, please read 674 | . 675 | 676 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # nixos 2 | -------------------------------------------------------------------------------- /clean.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | #nix-env --delete-generations old 4 | #nix-collect-garbage 5 | nix-collect-garbage -d 6 | #nix-collect-garbage ----delete-older-than 30d 7 | nix-store --optimise 8 | -------------------------------------------------------------------------------- /configuration.nix: -------------------------------------------------------------------------------- 1 | # Edit this configuration file to define what should be installed on 2 | # your system. Help is available in the configuration.nix(5) man page 3 | # and in the NixOS manual (accessible by running ‘nixos-help’). 4 | 5 | { config, pkgs, ... }: 6 | 7 | let 8 | 9 | # Create file in import path looking like: { user = 'username'; passwd = 'password'; cifs = 'cifspassword'; hostname = 'hostname'; } 10 | # This info is in a different file, so that the config can bit tracked by git without revealing sensitive infos. Feel free to expand 11 | mySecrets = import /root/.nixos/mySecrets.nix; 12 | 13 | # pass = pkgs: pkgs.pass.override { gnupg = pkgs.gnupg; }; # or your gnupg version 14 | 15 | in 16 | # Check if custom vars are set 17 | 18 | # Auth SSH Key 19 | assert mySecrets.auth_ssh_key1 != ""; 20 | assert mySecrets.auth_ssh_key2 != ""; 21 | 22 | assert mySecrets.user != ""; 23 | assert mySecrets.passwd != ""; 24 | assert mySecrets.hashedpasswd != ""; 25 | assert mySecrets.cifs != ""; 26 | assert mySecrets.hostname != ""; 27 | assert mySecrets.smbhome != ""; 28 | assert mySecrets.smboffice != ""; 29 | assert mySecrets.ibsuser != ""; 30 | assert mySecrets.ibspass != ""; 31 | assert mySecrets.ibsip != ""; 32 | 33 | # Wireguard 34 | ## Private Key 35 | assert mySecrets.wg_priv_key != ""; 36 | ## Home VPN 37 | assert mySecrets.wg_home_ips != ""; 38 | assert mySecrets.wg_home_allowed != ""; 39 | assert mySecrets.wg_home_end != ""; 40 | assert mySecrets.wg_home_pubkey != ""; 41 | ## Jus-Law VPN 42 | assert mySecrets.wg_jl_ips != ""; 43 | assert mySecrets.wg_jl_allowed != ""; 44 | assert mySecrets.wg_jl_end != ""; 45 | assert mySecrets.wg_jl_pubkey != ""; 46 | ## h&b Data VPN 47 | assert mySecrets.wg_hb_ips != ""; 48 | assert mySecrets.wg_hb_allowed != ""; 49 | assert mySecrets.wg_hb_end != ""; 50 | assert mySecrets.wg_hb_pubkey != ""; 51 | # ONS 52 | assert mySecrets.wg_ons_ips != ""; 53 | assert mySecrets.wg_ons_allowed != ""; 54 | assert mySecrets.wg_ons_end != ""; 55 | assert mySecrets.wg_ons_pubkey != ""; 56 | 57 | # SSMTP 58 | assert mySecrets.ssmtp_mailto != ""; 59 | assert mySecrets.ssmtp_user != ""; 60 | assert mySecrets.ssmtp_pass != ""; 61 | assert mySecrets.ssmtp_host != ""; 62 | assert mySecrets.ssmtp_domain != ""; 63 | assert mySecrets.ssmtp_root != ""; 64 | 65 | 66 | { 67 | imports = 68 | [ # Include the results of the hardware scan. 69 | ./hardware-configuration.nix 70 | # Fix DisplayLink: see https://gist.github.com/eyJhb/b44a6de738965a3e895f456be2683b50 https://github.com/NixOS/nixpkgs/issues/62871 71 | # /root/DisplayLink/displaylink.nix 72 | ]; 73 | 74 | # Use latest kernel 75 | # See VirtualBox settings 76 | 77 | # Add more filesystems 78 | boot.supportedFilesystems = [ "zfs" ]; 79 | boot.zfs.enableUnstable = true; 80 | services.zfs.autoScrub = { 81 | enable = true; 82 | interval = "monthly"; 83 | pools = [ ]; # List of ZFS pools to periodically scrub. If empty, all pools will be scrubbed. 84 | }; 85 | services.zfs.zed.settings = { 86 | ZED_DEBUG_LOG = "/tmp/zed.dbg.log"; 87 | 88 | ZED_EMAIL_ADDR = [ "jaus@sjau.ch" "jau@jus-law.ch" "hyper@servi.home.sjau.ch" ]; 89 | ZED_EMAIL_PROG = "mail"; 90 | ZED_EMAIL_OPTS = "-s '@SUBJECT@' @ADDRESS@"; 91 | 92 | ZED_NOTIFY_INTERVAL_SECS = 3600; 93 | ZED_NOTIFY_VERBOSE = false; 94 | 95 | 96 | ZED_USE_ENCLOSURE_LEDS = true; 97 | ZED_SCRUB_AFTER_RESILVER = true; 98 | }; 99 | 100 | # Add memtest86 101 | boot.loader.grub.memtest86.enable = true; 102 | 103 | # Use the GRUB 2 boot loader. 104 | boot.loader.grub.enable = true; 105 | boot.loader.grub.version = 2; 106 | # Define on which hard drive you want to install Grub. 107 | boot.loader.grub.devices = [ 108 | "/dev/disk/by-id/ata-Samsung_SSD_850_PRO_1TB_S2BBNWAHC23186P" 109 | "/dev/disk/by-id/nvme-Samsung_SSD_970_EVO_Plus_1TB_S4EWNF0M925532R" 110 | ]; # or "nodev" for efi only 111 | 112 | # Remote ZFS Unlock 113 | # boot.initrd.network = { 114 | # enable = false; 115 | # ssh = { 116 | # enable = true; 117 | # port = 2222; 118 | # hostECDSAKey = /root/initrd-ssh-key; 119 | # hostKeys = [ 120 | # /etc/secrets/initrd/ssh_host_rsa_key 121 | # /etc/secrets/initrd/ssh_host_ed_25519_key 122 | # "/root/initrd-openssh-key" 123 | # ]; 124 | # authorizedKeys = [ "${mySecrets.auth_ssh_key1}" "${mySecrets.auth_ssh_key2}" ]; 125 | # }; 126 | # postCommands = '' 127 | # echo "zfs load-key -a; killall zfs" >> /root.profile 128 | # ''; 129 | # }; 130 | boot.initrd.kernelModules = [ "r8169" "cdc_ncm" "xhci_hcd" "usbnet" "intel_xhci_usb_role_switch" "usbcore" "usb_common" "xhci_pci" ]; 131 | # boot.kernelParams = [ "ip=dhcp" ]; 132 | 133 | 134 | # Clean /tmp at boot 135 | boot.cleanTmpDir = true; 136 | 137 | 138 | # Load additional hardware stuff 139 | hardware = { 140 | # Hardware settings 141 | cpu.intel.updateMicrocode = true; 142 | # enableAllFirmware = true; 143 | enableRedistributableFirmware = true; 144 | pulseaudio.enable = true; 145 | pulseaudio.package = pkgs.pulseaudioFull; 146 | opengl.driSupport32Bit = true; # Required for Steam 147 | pulseaudio.support32Bit = true; # Required for Steam 148 | bluetooth.enable = true; 149 | }; 150 | 151 | # Filsystem and remote dirs - thx to sphalerite, clever and Shados 152 | fileSystems = let 153 | makeServer = { remotefs, userfs, passwordfs, xsystemfs, localfs }: name: { 154 | name = "${localfs}/${name}"; 155 | value = { 156 | device = "//${remotefs}/${name}"; 157 | fsType = "cifs"; 158 | options = [ "noauto" "user" "uid=1000" "gid=100" "username=${userfs}" "password=${passwordfs}" "iocharset=utf8" "x-systemd.automount" "x-systemd.idle-timeout=60" "x-systemd.device-timeout=5s" "x-systemd.mount-timeout=5s" ]; 159 | }; 160 | }; 161 | home = makeServer { 162 | remotefs = "${mySecrets.smbhome}"; 163 | userfs = "${mySecrets.user}"; 164 | passwordfs = "${mySecrets.cifs}"; 165 | xsystemfs = "wireguard-wg_home.service"; 166 | localfs = "/mnt/home"; 167 | }; 168 | office = makeServer { 169 | remotefs = "${mySecrets.smboffice}"; 170 | userfs = "none"; 171 | passwordfs = "none"; 172 | xsystemfs = "wireguard-wg_jl.service"; 173 | localfs = "/mnt/jus-law"; 174 | }; 175 | in (builtins.listToAttrs ( 176 | map home [ "Audio" "Shows" "Video" "hyper" "Plex" ] 177 | ++ [( office "Advo" )])) 178 | // { 179 | "/var/tmp" = { device = "tmpfs" ; fsType = "tmpfs"; }; 180 | }; 181 | 182 | # Create some folders 183 | system.activationScripts.media = '' 184 | mkdir -m 0755 -p /mnt/home/{Audio,Shows,SJ,Video,backup,eeePC,hyper,rtorrent,Plex} 185 | mkdir -m 0755 -p /mnt/ibs/{ARCHIV,DATEN,INDIGO,LEAD,VERWALTUNG,SCAN} 186 | mkdir -m 0755 -p /mnt/jus-law/Advo 187 | ''; 188 | 189 | 190 | 191 | # Trust hydra. Needed for one-click installations. 192 | nix.trustedBinaryCaches = [ "http://hydra.nixos.org" ]; 193 | 194 | 195 | 196 | # Setup networking 197 | networking = { 198 | # Disable IPv6 199 | enableIPv6 = false; 200 | hostName = "${mySecrets.hostname}"; # Define your hostname. 201 | hostId = "bac8c473"; 202 | # enable = true; # Enables wireless. Disable when using network manager 203 | networkmanager.enable = true; 204 | # interfaces.eth0.useDHCP = true; 205 | firewall.enable = true; 206 | firewall.allowPing = true; 207 | firewall.allowedUDPPorts = [ 137 138 2222 5000 5001 21025 21026 21027 22000 22026 5959 45000 8384 5900 3389 ]; 208 | firewall.allowedTCPPorts = [ 139 445 2222 3389 5000 5001 21027 22000 5959 45000 6080 8384 5900 3389 ]; 209 | # Early SSH / initrd 210 | # Samba: 137 138 (udp) 139 445 (tcp) 211 | # Netcat: 5000 212 | # IPerf: 5001 213 | # Syncthing: 21025 21026 21027 22000 22026 - WUI: 8384 214 | # SPICE/VNC: 5900 215 | # WebSockify: 5959 216 | # nginx: 4500 217 | # RDP: 3389 218 | extraHosts = '' 219 | 188.40.139.2 ns99 220 | 10.8.0.8 ns 221 | 176.9.139.175 hetzi manager.roleplayer.org # Hetzner EX4 Roleplayer 222 | 10.8.0.97 scriptcase 223 | 10.8.20.79 raspimam 224 | 10.8.20.80 mam 225 | 226 | 127.0.0.1 subi.home.sjau.ch subi 227 | 10.10.11.7 vpn-data.jus-law.ch 228 | 10.10.20.7 wg-data.jus-law.ch 229 | 230 | 10.100.200.7 vpn-data.heer-baumgartner.ch 231 | 232 | 176.31.121.75 kimsufi ks.jus-law.ch 233 | 51.15.190.68 ons ons.jus-law.ch 234 | 235 | # Get Ad/Tracking server list from https://github.com/sjau/adstop 236 | ${builtins.readFile (builtins.fetchurl { name = "blocked_hosts.txt"; url = "https://raw.githubusercontent.com/sjau/adstop/master/hosts"; })} 237 | 0.0.0.0 protectedinfoext.biz 238 | ''; 239 | }; 240 | 241 | # Enable dbus 242 | services.dbus.enable = true; 243 | 244 | # Select internationalisation properties. 245 | console.font = "Lat2-Terminus16"; 246 | console.keyMap = "sg-latin1"; 247 | i18n.defaultLocale = "en_US.UTF-8"; 248 | 249 | # List services that you want to enable: 250 | 251 | 252 | # Enable the OpenSSH daemon. 253 | services.openssh = { 254 | enable = true; 255 | permitRootLogin = "yes"; 256 | }; 257 | 258 | 259 | # Enable CUPS to print documents. 260 | services.printing = { 261 | enable = true; 262 | drivers = [ pkgs.gutenprint pkgs.hplip ]; 263 | }; 264 | 265 | 266 | # Enable the X11 windowing system. 267 | services.xserver = { 268 | enable = true; 269 | # videoDrivers = [ "amdgpu" "intel" "modesetting" "displaylink" ]; 270 | videoDrivers = [ "amdgpu" "intel" "modesetting" ]; 271 | layout = "ch"; 272 | xkbOptions = "eurosign:e"; 273 | synaptics = { 274 | enable = false; 275 | }; 276 | 277 | # Enable the KDE Desktop Environment. 278 | displayManager.sddm = { 279 | enable = true; 280 | autoNumlock = true; 281 | autoLogin = { 282 | enable = true; 283 | user = "${mySecrets.user}"; 284 | }; 285 | }; 286 | displayManager.lightdm = { 287 | enable = false; 288 | autoLogin = { 289 | enable = true; 290 | user = "${mySecrets.user}"; 291 | }; 292 | }; 293 | desktopManager.plasma5.enable = true; 294 | desktopManager.lxqt.enable = false; 295 | windowManager.openbox.enable = false; 296 | }; 297 | 298 | 299 | # Use KDE5 unstable 300 | nixpkgs.config.packageOverrides = super: let self = super.pkgs; in { 301 | plasma5_stable = self.plasma5_latest; 302 | kdeApps_stable = self.kdeApps_latest; 303 | }; 304 | 305 | # services.xrdp.enable = true; 306 | # services.xrdp.defaultWindowManager = "${pkgs.icewm}/bin/icewm"; 307 | # services.xserver.windowManager.icewm.enable = true; 308 | 309 | 310 | # Setup a "sendmail" 311 | services.ssmtp = { 312 | enable = true; 313 | authUser = "${mySecrets.ssmtp_user}"; 314 | authPass = "${mySecrets.ssmtp_pass}"; 315 | hostName = "${mySecrets.ssmtp_host}"; 316 | domain = "${mySecrets.ssmtp_domain}"; 317 | root = "${mySecrets.ssmtp_root}"; 318 | useSTARTTLS = true; 319 | useTLS = true; 320 | }; 321 | 322 | 323 | # Enable Virtualbox 324 | virtualisation.virtualbox = { 325 | host = { 326 | enable = true; 327 | enableExtensionPack = true; 328 | }; 329 | guest.enable = false; 330 | }; 331 | boot = { 332 | # kernelPackages = pkgs.linuxPackages_latest; 333 | # Works with EVDI 334 | # kernelPackages = pkgs.linuxPackages_5_4; 335 | # Testing 336 | # kernelPackages = pkgs.linuxPackages_5_5; 337 | }; 338 | 339 | 340 | # Enable Docker 341 | virtualisation.docker = { 342 | enable = true; 343 | }; 344 | 345 | # Enable Avahi for local domain resoltuion 346 | services.avahi = { 347 | enable = true; 348 | hostName = "${mySecrets.hostname}"; 349 | }; 350 | 351 | 352 | # Enable nscd 353 | services.nscd = { 354 | enable = true; 355 | }; 356 | 357 | # Enable ntp or rather timesyncd 358 | services.timesyncd = { 359 | enable = true; 360 | servers = [ "0.ch.pool.ntp.org" "1.ch.pool.ntp.org" "2.ch.pool.ntp.org" "3.ch.pool.ntp.org" ]; 361 | }; 362 | 363 | # Custom files in /etc 364 | environment.etc = { 365 | "easysnap/easysnap.hourly".text = '' 366 | # Format: local ds ; local encryption ds ; raw sending ; intermediay sending; export pool; remote user@host ; remote ds ; number of snapshots ; free disk warning 367 | 368 | # Servi 369 | tankServers/encZFS/home-server/Nixos;tankServers/encZFS;;y;n;root@10.200.0.1;tankServi/encZFS/Nixos;4380;200 370 | tankServers/encZFS/home-server/Media;tankServers/encZFS;;y;n;root@10.200.0.1;tankServi/encZFS/Media;4380;200 371 | tankMediaBU/encZFS/Plex;tankMediaBU/encZFS;;y;n;root@servi.home.sjau.ch;tankMedia/encZFS/Plex;4380;100 372 | 373 | # Remote Servers 374 | tankServers/encZFS/online-net-server;tankServers/encZFS;;y;n;root@ons.jus-law.ch;tankOnline/encZFS/Nixos;4380;200 375 | tankServers/encZFS/ovh-cloud-ssd-server;tankServers/encZFS;;y;n;root@ov.jus-law.ch;tankOVH/encZFS/Nixos;4380;200 376 | 377 | # Roleplayer Server 378 | tankServers/encZFS/roleplayer-server/Debian;;;y;n;root@ispc.roleplayer.org;tankRP/Debian;2190;200 379 | tankServers/encZFS/roleplayer-server/Debian/home;;;y;n;root@ispc.roleplayer.org;tankRP/Debian/home;2190;200 380 | tankServers/encZFS/roleplayer-server/Debian/var;;;y;n;root@ispc.roleplayer.org;tankRP/Debian/var;2190;200 381 | tankServers/encZFS/roleplayer-server/Debian/var/vmail;;;y;n;root@ispc.roleplayer.org;tankRP/Debian/var/vmail;2190;200 382 | tankServers/encZFS/roleplayer-server/Debian/var/www;;;y;n;root@ispc.roleplayer.org;tankRP/Debian/var/www;2190;200 383 | ''; 384 | "easysnap/easysnap.hourly".mode = "0644"; 385 | # Make /etc/hosts writeable 386 | "hosts".mode = "0644"; 387 | }; 388 | 389 | # Enable cron 390 | services.cron = { 391 | enable = true; 392 | mailto = "${mySecrets.ssmtp_mailto}"; 393 | systemCronJobs = [ 394 | # Make sure network card is set to 1gpbs 395 | "*/5 * * * * root ethtool -s enp2s0f1 autoneg on" 396 | # Run ZFS Trim every night 397 | "1 23 * * * root zpool trim tankSubi" 398 | # "0 3,9,15,21 * * * root /root/fstrim.sh >> /tmp/fstrim.txt 2>&1" 399 | "0 2 * * * root /root/backup.sh >> /tmp/backup.txt 2>&1" 400 | "0 */6 * * * root /root/ssd_level_wear.sh >> /tmp/ssd_level_wear.txt 2>&1" 401 | "30 * * * * ${mySecrets.user} pass git pull > /dev/null 2>&1" 402 | "40 * * * * ${mySecrets.user} pass git push > /dev/null 2>&1" 403 | "*/5 * * * * root autoResilver 'tankSubi' 'usb-Seagate_Expansion_SSD_00000000NAAL0Z3B-0:0'" 404 | # "*/5 * * * * root autoResilver 'tankSubi' 'usb-TOSHIBA_External_USB_3.0_20170612010552F-0:0, usb-TOSHIBA_External_USB_3.0_2012110725463-0:0'" 405 | # "25 4 * * * root stopResilver 'tankSubi' 'usb-TOSHIBA_External_USB_3.0_20170612010552F-0:0 usb-TOSHIBA_External_USB_3.0_2012110725463-0:0'" 406 | # "55 * * * * root offlineResilver 'tankSubi' 'usb-TOSHIBA_External_USB_3.0_20170612010552F-0:0, usb-TOSHIBA_External_USB_3.0_2012110725463-0:0'" 407 | "55 * * * * root offlineResilver 'tankSubi' 'usb-Seagate_Expansion_SSD_00000000NAAL0Z3B-0:0'" 408 | "3 0 * * * root '/root/.acme.sh/acme.sh' --cron --home '/root/.acme.sh' > /dev/null" 409 | ### Easy Snap 410 | "0 * * * * root /home/hyper/Desktop/git-repos/easysnap/easysnap hourly" 411 | "25 * * * * root /home/hyper/Desktop/git-repos/easysnap/easysnapRecv hourly" 412 | ]; 413 | }; 414 | 415 | systemd.services.stopResilver = { 416 | description = "Stop Resilvering / Mirroring upon powering down"; 417 | after = [ "zfs.target" ]; 418 | wantedBy = [ "zfs.target" ]; 419 | serviceConfig = { 420 | Type = "oneshot"; 421 | ExecStart = "/run/current-system/sw/bin/true"; 422 | ExecStop = "/run/current-system/sw/bin/stopResilver 'tankSubi' 'usb-TOSHIBA_External_USB_3.0_20170612010552F-0:0 usb-TOSHIBA_External_USB_3.0_2012110725463-0:0'"; 423 | RemainAfterExit = true; 424 | }; 425 | }; 426 | systemd.services.stopResilver.enable = true; 427 | 428 | 429 | # systemd.services.wireguard-wg_home.serviceConfig.Restart = "on-failure"; 430 | # systemd.services.wireguard-wg_home.serviceConfig.RestartSec = "5s"; 431 | # systemd.services.wireguard-wg_jl.serviceConfig.Restart = "on-failure"; 432 | # systemd.services.wireguard-wg_jl.serviceConfig.RestartSec = "5s"; 433 | # systemd.services.wireguard-wg_ons.serviceConfig.Restart = "on-failure"; 434 | # systemd.services.wireguard-wg_ons.serviceConfig.RestartSec = "5s"; 435 | 436 | 437 | # Setuid 438 | security.wrappers."mount.cifs".source = "${pkgs.cifs-utils}/bin/mount.cifs"; 439 | security.wrappers."cdrecord".source = "${pkgs.cdrtools}/bin/cdrecord"; 440 | security.wrappers.spice-client-glib-usb-acl-helper.source = "${pkgs.spice_gtk}/bin/spice-client-glib-usb-acl-helper.real"; 441 | 442 | # Enable sudo 443 | security.sudo = { 444 | enable = true; 445 | wheelNeedsPassword = true; 446 | }; 447 | 448 | 449 | # Define a user account. Don't forget to set a password with ‘passwd’. 450 | users.defaultUserShell = "/var/run/current-system/sw/bin/bash"; 451 | users.extraUsers.${mySecrets.user} = { 452 | isNormalUser = true; # creates home, adds to group users, sets default shell 453 | description = "${mySecrets.user}"; 454 | extraGroups = [ "networkmanager" "vboxusers" "wheel" "audio" "cdrom" "kvm" "libvirtd" "adbusers" "docker" ]; # wheel is for the sudo group 455 | uid = 1000; 456 | initialHashedPassword = "${mySecrets.hashedpasswd}"; 457 | }; 458 | 459 | 460 | fonts = { 461 | enableFontDir = true; 462 | enableGhostscriptFonts = true; 463 | fonts = with pkgs ; [ 464 | corefonts 465 | liberation_ttf 466 | ttf_bitstream_vera 467 | dejavu_fonts 468 | terminus_font 469 | bakoma_ttf 470 | clearlyU 471 | cm_unicode 472 | andagii 473 | bakoma_ttf 474 | inconsolata 475 | gentium 476 | ubuntu_font_family 477 | source-sans-pro 478 | source-code-pro 479 | ]; 480 | }; 481 | 482 | 483 | # Enable Wireguard 484 | networking.wireguard.interfaces = { 485 | wg_home = { 486 | ips = [ "${mySecrets.wg_home_ips}" ]; 487 | privateKey = "${mySecrets.wg_priv_key}"; 488 | peers = [ { 489 | allowedIPs = [ "${mySecrets.wg_home_allowed}" ]; 490 | endpoint = "${mySecrets.wg_home_end}"; 491 | publicKey = "${mySecrets.wg_home_pubkey}"; 492 | persistentKeepalive = 25; 493 | } ]; 494 | }; 495 | wg_ons = { 496 | ips = [ "${mySecrets.wg_ons_ips}" ]; 497 | privateKey = "${mySecrets.wg_priv_key}"; 498 | peers = [ { 499 | allowedIPs = [ "${mySecrets.wg_ons_allowed}" ]; 500 | endpoint = "${mySecrets.wg_ons_end}"; 501 | publicKey = "${mySecrets.wg_ons_pubkey}"; 502 | persistentKeepalive = 25; 503 | } ]; 504 | }; 505 | wg_jl = { 506 | ips = [ "${mySecrets.wg_jl_ips}" ]; 507 | privateKey = "${mySecrets.wg_priv_key}"; 508 | peers = [ { 509 | allowedIPs = [ "${mySecrets.wg_jl_allowed}" ]; 510 | endpoint = "${mySecrets.wg_jl_end}"; 511 | publicKey = "${mySecrets.wg_jl_pubkey}"; 512 | persistentKeepalive = 25; 513 | } ]; 514 | }; 515 | wg_hb = { 516 | ips = [ "${mySecrets.wg_hb_ips}" ]; 517 | privateKey = "${mySecrets.wg_priv_key}"; 518 | peers = [ { 519 | allowedIPs = [ "${mySecrets.wg_hb_allowed}" ]; 520 | endpoint = "${mySecrets.wg_hb_end}"; 521 | publicKey = "${mySecrets.wg_hb_pubkey}"; 522 | persistentKeepalive = 25; 523 | } ]; 524 | }; 525 | }; 526 | 527 | 528 | # Enable libvirtd daemon 529 | virtualisation.libvirtd = { 530 | enable = true; 531 | # enableKVM = true; 532 | qemuPackage = pkgs.qemu_kvm; 533 | }; 534 | services.spice-vdagentd.enable = true; 535 | # Make smartcard reader and label printer accessible to everyone, so they can be passed to the VM 536 | services.udev.extraRules = '' 537 | SUBSYSTEM=="usb", ATTR{idVendor}=="072f", ATTR{idProduct}=="90cc", GROUP="users", MODE="0777" 538 | SUBSYSTEM=="usb", ATTR{idVendor}=="04f9", ATTR{idProduct}=="2043", GROUP="users", MODE="0777" 539 | KERNEL=="zd*", SUBSYSTEM=="block", GROUP="users", MODE="0660" 540 | ''; 541 | 542 | 543 | # Samba 544 | services.samba = { 545 | enable = true; 546 | securityType = "user"; 547 | syncPasswordsByPam = true; # Enabling this will add a line directly after pam_unix.so. 548 | # Whenever a password is changed the samba password will be updated as well. 549 | # However, you still have to add the samba password once, using smbpasswd -a user. 550 | extraConfig = '' 551 | server string = ${mySecrets.hostname} 552 | netbios name = ${mySecrets.hostname} 553 | workgroup = WORKGROUP 554 | max xmit = 65535 555 | socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE 556 | hosts allow = 127.0.0. 10.0.0. 10.10.10. 10.10.11. 10.10.20. 557 | hosts deny = 0.0.0.0/0 558 | security = user 559 | guest account = hyper 560 | map to guest = bad user 561 | # log file = /tmp/%m.log 562 | # log level = 3 563 | 564 | # Disable printer 565 | printcap name = /dev/null 566 | load printers = no 567 | printing = bsd 568 | show add printer wizard = no 569 | disable spoolss = yes 570 | ''; 571 | shares = { 572 | Desktop = { 573 | path = "/home/hyper/Desktop"; 574 | browseable = "yes"; 575 | "read only" = "no"; 576 | "guest only" = "yes"; 577 | "guest ok" = "yes"; 578 | "create mask" = "0644"; 579 | "directory mask" = "0755"; 580 | "hosts allow" = "127.0.0.1 10.0.0. 10.10.10. 10.10.11. 10.10.20."; 581 | }; 582 | }; 583 | }; 584 | 585 | 586 | # Enable smartmon daemon 587 | services.smartd = { 588 | enable = true; 589 | devices = [ { device = "/dev/sda"; } ]; 590 | }; 591 | 592 | 593 | # Enable smartcard daemon 594 | services.pcscd = { 595 | enable = true; 596 | }; 597 | 598 | 599 | # Enable Syncthing 600 | services.syncthing = { 601 | enable = true; 602 | dataDir = "/home/${mySecrets.user}/Desktop/Syncthing"; 603 | configDir = "/home/${mySecrets.user}/.config/syncthing"; 604 | user = "${mySecrets.user}"; 605 | openDefaultPorts = true; 606 | guiAddress = "0.0.0.0:8384"; 607 | }; 608 | 609 | 610 | # Enable TOR 611 | services.tor = { 612 | enable = true; 613 | client.enable = true; 614 | controlPort = 9051; 615 | }; 616 | 617 | 618 | # Enable sysstat 619 | services.sysstat = { 620 | enable = true; 621 | }; 622 | 623 | # Enable Locate 624 | services.locate = { 625 | enable = true; 626 | prunePaths = [ "/tmp" "/var/tmp" "/var/cache" "/var/lock" "/var/run" "/var/spool" "/mnt/home" "/mnt/ibs" "/mnt/IBS" "/mnt/jus-law" "/mnt/rp" "/mnt/tankServers" "/mnt/tb40" "/mnt/wd40tb" ]; 627 | }; 628 | 629 | 630 | # Time. 631 | time.timeZone = "Europe/Zurich"; 632 | 633 | 634 | # Add the NixOS Manual on virtual console 8 635 | services.nixosManual.showManual = true; 636 | 637 | 638 | # Enable ALSA 639 | sound.enable = true; 640 | 641 | # Setup bash completion 642 | programs.bash.enableCompletion = true; 643 | 644 | 645 | # Setup nano 646 | programs.nano.nanorc = '' 647 | set nowrap 648 | set tabstospaces 649 | set tabsize 4 650 | set constantshow 651 | # include /usr/share/nano/sh.nanorc 652 | ''; 653 | 654 | # Setup ADB 655 | programs.adb.enable = true; 656 | nixpkgs.config.android_sdk.accept_license = true; 657 | 658 | # The NixOS release to be compatible with for stateful data such as databases. 659 | # It will e.g. upgrade databases to newer versions and that can't be reverted by Nixos. 660 | system.stateVersion = "19.03"; 661 | 662 | nixpkgs.config.allowUnfree = true; 663 | # nixpkgs.config.allowBroken = true; 664 | 665 | nixpkgs.config.chromium = { 666 | # enablePepperFlash = true; # Chromium removed support for Mozilla (NPAPI) plugins so Adobe Flash no longer works 667 | }; 668 | 669 | 670 | # List packages installed in system profile. To search by name, run: 671 | # $ nix-env -qaP | grep wget 672 | # List of packages that gets installed.... 673 | environment.systemPackages = with pkgs; [ 674 | # androidenv.platformTools # contains ADB 675 | # android-studio 676 | aspell 677 | aspellDicts.de 678 | aspellDicts.en 679 | audacity 680 | bash-completion 681 | bind # provides dig and nslookup 682 | bluedevil 683 | bluez 684 | bluez-tools 685 | brave 686 | cargo 687 | chromium 688 | cifs_utils 689 | cdrtools 690 | cmake 691 | coreutils 692 | cryptsetup 693 | curl 694 | dcfldd # dd alternative that shows progress and can make different checksums on the fly 695 | dialog 696 | # displaylink 697 | directvnc 698 | dmidecode 699 | dos2unix 700 | dstat 701 | easysnap 702 | enca 703 | ethtool 704 | exfat 705 | fatrace 706 | file 707 | filezilla 708 | firefoxWrapper 709 | ffmpeg 710 | foo2zjs # Printer drivers for Oki -> http://foo2hiperc.rkkda.com/ 711 | foomatic-filters 712 | gcc 713 | gdb 714 | ghostscript 715 | gimp 716 | git 717 | gksu 718 | gnome3.dconf 719 | gnome3.dconf-editor 720 | gnome3.zenity 721 | gnupg # GnuPG 2 -> provides gpg2 binary 722 | gparted 723 | gptfdisk 724 | gwenview 725 | hdparm 726 | htop 727 | hunspellDicts.de-ch 728 | icedtea8_web 729 | iftop 730 | imagemagick 731 | iosevka 732 | iotop 733 | iperf 734 | iputils 735 | jdk 736 | jpegoptim 737 | jq 738 | jre 739 | # KDE 5 740 | ark 741 | dolphin 742 | kdenlive frei0r # frei0r provides transition effects 743 | kdeFrameworks.kdesu 744 | k3b 745 | kate 746 | kcalc 747 | konversation 748 | okular 749 | opusTools 750 | oxygen 751 | oxygen-icons5 752 | oxygenfonts 753 | plasma-desktop 754 | plasma-integration 755 | plasma-nm 756 | plasma-workspace 757 | spectacle # KSnapShot replacement for KDE 5 758 | kdeApplications.kdialog 759 | kdeApplications.krfb 760 | # End of KDE 5 761 | kvm 762 | libreoffice 763 | libuchardet 764 | lightning 765 | links 766 | lshw 767 | lsof 768 | lxqt.lximage-qt 769 | manpages 770 | mc 771 | mdadm 772 | mediainfo 773 | mkpasswd 774 | mktorrent 775 | mplayer 776 | mpv 777 | ms-sys 778 | # netcat-gnu 779 | ninja 780 | nix-index 781 | nix-info 782 | # nix-index # provides nix-locate 783 | nix-prefetch-github 784 | # nix-repl # do: :l to load the packages, then do qt5.m and hit tab twice 785 | nmap 786 | nox # Easy search for packages 787 | nss 788 | nssTools 789 | ntfs3g 790 | nvme-cli 791 | opensc 792 | openssl 793 | openvpn 794 | pandoc 795 | parted 796 | pass 797 | patchelf 798 | pavucontrol 799 | pciutils 800 | pcsctools 801 | pdftk 802 | php # PHP-Cli 803 | pinentry 804 | pinentry-qt 805 | pkgconfig 806 | # playonlinux 807 | poppler_utils # provides command_not_found 808 | pv 809 | python27Packages.youtube-dl 810 | python37Packages.websockify 811 | psmisc 812 | pwgen 813 | qemu 814 | qt5Full 815 | qtpass 816 | recode 817 | recoll 818 | rfkill 819 | rustc 820 | simplescreenrecorder 821 | smartmontools 822 | smem 823 | smplayer 824 | sox 825 | spice 826 | spice-gtk 827 | win-spice 828 | sqlite 829 | sqlitebrowser 830 | sshpass 831 | stdenv # build-essential on nixos 832 | # steam 833 | subversion 834 | sudo 835 | # suisseid-pkcs11 836 | swt 837 | sylpheed 838 | syncthing 839 | sysfsutils 840 | sysstat 841 | system_config_printer 842 | teamspeak_client 843 | telnet 844 | tesseract 845 | # (import (builtins.fetchTarball ("https://github.com/NixOS/nixpkgs/archive/46420bbaa3f8f79ce7b9ee68e98eba1f7bce2db6.tar.gz")) {}).thunderbird 846 | thunderbird 847 | birdtray 848 | tightvnc 849 | tmux 850 | unoconv 851 | unrar 852 | unzip 853 | usbutils 854 | virt-viewer 855 | virtmanager 856 | vlc 857 | wget 858 | which 859 | whois 860 | wine 861 | winetricks 862 | wireguard 863 | wireshark 864 | woeusb 865 | # xpdf # provides pdftotext 866 | zip 867 | 868 | # easysnap 869 | (pkgs.callPackage /home/hyper/Desktop/git-repos/nix-expressions/easysnap.nix {}) 870 | 871 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/pastesl/master/pastesl.nix") {}) 872 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/pdfForts/master/pdfForts.nix") {}) 873 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/jusLinkComposer/master/jusLinkComposer.nix") {}) 874 | # (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/master-pdf-editor.nix") {}) 875 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/getTechDetails.nix") {}) 876 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/autoResilver.nix") {}) 877 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/stopResilver.nix") {}) 878 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/offlineResilver.nix") {}) 879 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/freeCache.nix") {}) 880 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/checkHosts.nix") {}) 881 | (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/checkVersion.nix") {}) 882 | 883 | # (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/sjau/nix-expressions/master/batchsigner.nix") {}) 884 | # (pkgs.callPackage (builtins.fetchurl "https://raw.githubusercontent.com/bennofs/nix-index/master/default.nix") {}) 885 | 886 | # (pkgs.callPackage ./localsigner.nix {}) 887 | # (pkgs.callPackage ./suisseid-pkcs11.nix {}) 888 | # (pkgs.callPackage ./swisssign-pin-entry.nix {}) 889 | # (pkgs.callPackage ./swisssigner.nix {}) 890 | # ] ++ ( builtins.filter pkgs.stdenv.lib.isDerivation (builtins.attrValues kdeApps_stable)); 891 | 892 | ]; 893 | 894 | # suisseid-pkcs11 requires on ubuntu the following packages: 895 | # fontconfig fontconfig-config fonts-dejavu-core libaudio2 libccid libfontconfig1 libice6 libjbig0 libjpeg-turbo8 libjpeg8 libqt-declarative 896 | # libqt4-network libqt4-script libqt4-sql libqt4-xml libqt4-xmlpatterns libqt4core4 libqtdbus4 libqtgui4 libsm6 libtiff5 libxi6 libxrender1 897 | # libxt6 pcscd qtcore4-l10n suisseid-pkcs11 swisssign-pin-entry x11-common 898 | 899 | } 900 | -------------------------------------------------------------------------------- /customKernel.config: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/sjau/nixos/edfcd33b061aff47053d372b194a88fa36c1fade/customKernel.config -------------------------------------------------------------------------------- /encZFS.txt: -------------------------------------------------------------------------------- 1 | nano /etc/nixos/configuration.nix 2 | 3 | boot.supportedFilesystems = [ "zfs" ]; 4 | boot.zfs.enableUnstable = true; 5 | 6 | nixos-rebuild switch 7 | modprobe zfs 8 | 9 | fdisk /dev/sda 10 | 11 | o 12 | n 13 | p 14 | 1 15 | [enter] 16 | +500M 17 | n 18 | p 19 | 2 20 | [enter] 21 | [enter] 22 | w 23 | a 24 | 1 25 | 26 | zpool create -o ashift=12 -o altroot/mnt tank /dev/sda2 27 | zfs create -o encryption=aes-256-gcm -o keyformat=passphrase -o mountpoint=none tank/encfs 28 | [password] 29 | [password] 30 | zfs create -o mountpoint=legacy tank/encfs/nixos 31 | zfs create -o mountpoint=legacy tank/encfs/VMs 32 | mount -t zfs tank/encfs/nixos /mnt 33 | mkdir /mnt/boot 34 | mkdir /mnt/VMs 35 | mount -t zfs tank/encfs/VMs /mnt/VMs 36 | mkfs.ext4 /dev/sda1 37 | mount /dev/sda1 /mnt/boot 38 | nixos-generate-config --root /mnt 39 | 40 | nano /mnt/etc/nixos/configuration.nix 41 | 42 | boot.supportedFilesystems = [ "zfs" ]; 43 | boot.zfs.enableUnstable = true; 44 | 45 | hostId = "bac8c473"; 46 | 47 | 48 | # Open DD image: 49 | 50 | losetup --offset 500170752 /dev/loop2 sda.img 51 | -------------------------------------------------------------------------------- /exacteimage.nix: -------------------------------------------------------------------------------- 1 | { stdenv, fetchurl }: 2 | stdenv.mkDerivation rec { 3 | name = "exactimage-${version}"; 4 | version = "0.9.1"; 5 | 6 | src = fetchurl { 7 | url = "http://dl.exactcode.de/oss/exact-image/exact-image-0.9.1.tar.bz2"; 8 | sha256 = "79e6a58522897f9740aa3b5a337f63ad1e0361a772141b24aaff2e31264ece7d"; 9 | }; 10 | 11 | unpackCmd = '' 12 | ar p "$src" data.tar.xz | tar xJ 13 | ''; 14 | 15 | buildPhase = let 16 | rpaths = [ pcsclite stdenv.cc.cc ]; 17 | in '' 18 | for i in lib/*.so; do 19 | echo "${stdenv.lib.makeLibraryPath rpaths}" 20 | echo "$i" 21 | patchelf --set-rpath "${stdenv.lib.makeLibraryPath rpaths}" "$i" 22 | done 23 | ''; 24 | 25 | dontStrip = true; 26 | 27 | installPhase = '' 28 | for i in lib/*.so; do 29 | install -vD "$i" "$out/lib/$(basename "$i")" 30 | done 31 | 32 | ln -s ${pin-entry}/lib/libcvP11LCB.so $out/lib/libcvP11LCB.so 33 | ''; 34 | } -------------------------------------------------------------------------------- /hardware-configuration.nix: -------------------------------------------------------------------------------- 1 | # Do not modify this file! It was generated by ‘nixos-generate-config’ 2 | # and may be overwritten by future invocations. Please make changes 3 | # to /etc/nixos/configuration.nix instead. 4 | { config, lib, pkgs, ... }: 5 | 6 | { 7 | imports = 8 | [ 9 | ]; 10 | 11 | boot.initrd.availableKernelModules = [ "hid" "xhci_hcd" "xhci_pci" "ahci" "usb_storage" "usbhid" ]; 12 | boot.kernelModules = [ "kvm-intel" "kvm-amd" ]; 13 | boot.kernelParams = [ "amdgpu.dc=1" ]; 14 | boot.initrd.postDeviceCommands = "sleep 5; zpool import -a; zfs load-key -a"; 15 | # boot.kernelParams = [ "zfs.zfs_arc_max=6442450944" "boot.debug1devices" ]; 16 | boot.kernel.sysctl = { "vm.swappiness" = 20; "vm.dirty_ratio" = 10; "vm.dirty_background_ratio" = 1; }; 17 | # boot.extraModulePackages = [ config.boot.kernelPackages.rtlwifi_new config.boot.kernelPackages.wireguard ]; 18 | # boot.extraModulePackages = [ config.boot.kernelPackages.wireguard ]; 19 | boot.extraModulePackages = with config.boot.kernelPackages; [ wireguard ]; 20 | # Deactivate discreet optimus/nvidia card 21 | # boot.blacklistedKernelModules = [ "nouveau" ]; 22 | 23 | fileSystems."/" = 24 | { device = "tankSubi/encZFS/Nixos"; 25 | fsType = "zfs"; 26 | }; 27 | 28 | fileSystems."/home/hyper/.cache" = 29 | { device = "tankSubi/encZFS/Volatile/hyper.cache"; 30 | fsType = "zfs"; 31 | }; 32 | 33 | fileSystems."/mnt/encZFS/Media" = 34 | { device = "tankSubi/encZFS/Media"; 35 | fsType = "zfs"; 36 | }; 37 | 38 | fileSystems."/mnt/encZFS/Media/Anime" = 39 | { device = "tankSubi/encZFS/Media/Anime"; 40 | fsType = "zfs"; 41 | }; 42 | 43 | fileSystems."/mnt/encZFS/Media/Shows" = 44 | { device = "tankSubi/encZFS/Media/Shows"; 45 | fsType = "zfs"; 46 | }; 47 | 48 | fileSystems."/mnt/encZFS/VMs" = 49 | { device = "tankSubi/encZFS/VMs"; 50 | fsType = "zfs"; 51 | }; 52 | 53 | fileSystems."/tmp" = 54 | { device = "tankSubi/encZFS/Volatile/tmp"; 55 | fsType = "zfs"; 56 | }; 57 | 58 | fileSystems."/boot" = 59 | { device = "/dev/disk/by-uuid/9bcbc94c-0cf5-4196-8743-30cff4da376a"; 60 | fsType = "ext4"; 61 | }; 62 | 63 | swapDevices = [ ]; 64 | 65 | nix.maxJobs = lib.mkDefault 8; 66 | # powerManagement.cpuFreqGovernor = lib.mkDefault "powersave"; 67 | } 68 | -------------------------------------------------------------------------------- /list.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | nix-env -p /nix/var/nix/profiles/system --list-generations 4 | -------------------------------------------------------------------------------- /localsigner.nix: -------------------------------------------------------------------------------- 1 | { stdenv, fetchurl, oraclejdk8, swt, pcsclite, callPackage, makeWrapper }: 2 | 3 | let swt' = swt.override {jdk = jdk;}; 4 | jdk = oraclejdk8; 5 | suisse-id = callPackage ./suisseid-pkcs11.nix {}; 6 | in 7 | stdenv.mkDerivation rec { 8 | name = "localsigner-${version}"; 9 | version = "3.1.1"; 10 | 11 | src = fetchurl { 12 | url = "https://www.e-service.admin.ch/wiki/download/attachments/32801435/localsigner_3.1.1_linux.tar.gz?version=1&modificationDate=1430222842000"; 13 | sha256 = "065szy6ihp4rf21bsyv3pgd6pb3rac9ama1imvjadvghkfvwx19a"; 14 | name = "${name}.tar.gz"; 15 | }; 16 | 17 | buildInputs = [ makeWrapper ]; 18 | 19 | installPhase = '' 20 | echo $out 21 | 22 | rm lib/swt-* 23 | rm localsigner.sh 24 | mkdir -p $out/bin 25 | cp -r * $out/ 26 | substituteInPlace $out/configuration/drivers.properties --replace /usr/lib/ ${suisse-id}/lib/ 27 | 28 | export cp=$out/lib 29 | export cpath="$cp/localsigner.jar:$cp/JCAPI.jar:$cp/bcprov-jdk15-145.jar:$cp/bcmail-jdk15-145.jar:$cp/bctsp-jdk15-145.jar:${swt'}/jars/swt.jar" 30 | 31 | makeWrapper ${jdk}/bin/java $out/bin/localsigner \ 32 | --add-flags "-Xmx512m -Dbase=$out/ -Djsse.enableSNIExtension=false -classpath $cpath ch.admin.localsigner.main.LocalSigner" \ 33 | --prefix LD_LIBRARY_PATH : "${swt'}/lib:${pcsclite}/lib" \ 34 | --set JAVA_HOME ${jdk} 35 | ''; 36 | } -------------------------------------------------------------------------------- /remove-from-store: -------------------------------------------------------------------------------- 1 | nix-store --delete /nix/store/4mndxivxki26drrws741n581k5rfwvrd-nixos-16.03pre70277.3d0c064 2 | nix-store -q --roots /nix/store/4mndxivxki26drrws741n581k5rfwvrd-nixos-16.03pre70277.3d0c064 3 | rm /nix/var/nix/profiles/per-user/root/channels-1-link 4 | nix-store --delete /nix/store/4mndxivxki26drrws741n581k5rfwvrd-nixos-16.03pre70277.3d0c064 5 | 6 | -------------------------------------------------------------------------------- /suisseid-pkcs11.nix: -------------------------------------------------------------------------------- 1 | { stdenv, fetchurl, pcsclite, callPackage }: 2 | let 3 | pin-entry = callPackage ./swisssign-pin-entry.nix {}; 4 | in 5 | stdenv.mkDerivation rec { 6 | name = "suisseid-pkcs11-${version}"; 7 | version = "1.0.4292"; 8 | 9 | src = fetchurl { 10 | url = "http://update.swisssign.com/media/stick/repository/dists/unstable" 11 | + "/non-free/binary-amd64/suisseid-pkcs11_1.0.4292-1_amd64.deb"; 12 | sha256 = "21af0722fb6d7e78a34ed1982b3978a78a3ce86aec9a23af6b269d74c02c1717"; 13 | }; 14 | 15 | unpackCmd = '' 16 | ar p "$src" data.tar.xz | tar xJ 17 | ''; 18 | 19 | buildPhase = let 20 | rpaths = [ pcsclite stdenv.cc.cc ]; 21 | in '' 22 | for i in lib/*.so; do 23 | echo "${stdenv.lib.makeLibraryPath rpaths}" 24 | echo "$i" 25 | patchelf --set-rpath "${stdenv.lib.makeLibraryPath rpaths}" "$i" 26 | done 27 | ''; 28 | 29 | dontStrip = true; 30 | 31 | installPhase = '' 32 | for i in lib/*.so; do 33 | install -vD "$i" "$out/lib/$(basename "$i")" 34 | done 35 | 36 | ln -s ${pin-entry}/lib/libcvP11LCB.so $out/lib/libcvP11LCB.so 37 | ''; 38 | } -------------------------------------------------------------------------------- /swisssign-pin-entry.nix: -------------------------------------------------------------------------------- 1 | { stdenv, fetchurl, openssl, qt4 }: 2 | 3 | stdenv.mkDerivation rec { 4 | name = "swisssign-pin-entry-${version}"; 5 | version = "1.0.151"; 6 | 7 | src = fetchurl { 8 | url = "http://update.swisssign.com/media/stick/repository/dists/unstable" 9 | + "/non-free/binary-amd64/swisssign-pin-entry_1.0.151-1_amd64.deb"; 10 | sha256 = "4c4d08f19d671a9a1bbf68fa2f6e0624775ff68fccfc4ce3832030734088a287"; 11 | }; 12 | 13 | unpackCmd = '' 14 | ar p "$src" data.tar.xz | tar xJ 15 | ''; 16 | 17 | buildPhase = let 18 | rpaths = [ stdenv.cc.cc openssl qt4]; 19 | in '' 20 | for i in lib/*.so; do 21 | patchelf --set-rpath "${stdenv.lib.makeLibraryPath rpaths}" "$i" 22 | done 23 | ''; 24 | 25 | dontStrip = true; 26 | 27 | installPhase = '' 28 | for i in lib/*.so; do 29 | install -vD "$i" "$out/lib/$(basename "$i")" 30 | done 31 | ''; 32 | } -------------------------------------------------------------------------------- /swisssigner.nix: -------------------------------------------------------------------------------- 1 | { stdenv, fetchurl, gcc }: 2 | 3 | stdenv.mkDerivation rec { 4 | name = "swisssigner-${version}"; 5 | version = "2.1.543"; 6 | 7 | sourceRoot = "."; 8 | 9 | src = fetchurl { 10 | url = "http://update.swisssign.com/media/stick/repository/dists/unstable" 11 | + "/non-free/binary-amd64/swisssigner_2.1.543-1_amd64.deb"; 12 | sha256 = "4c4d08f19d671a9a1bbf68fa2f6e0624775ff68fccfc4ce3832030734088a287"; 13 | }; 14 | 15 | unpackCmd = '' 16 | ar p "$src" data.tar.xz | tar xJ 17 | ''; 18 | 19 | buildPhase = let 20 | rpaths = [ gcc ]; 21 | in '' 22 | for i in lib/*.so; do 23 | patchelf --set-rpath "${stdenv.lib.makeLibraryPath rpaths}" "$i" 24 | done 25 | ''; 26 | 27 | dontStrip = true; 28 | 29 | installPhase = '' 30 | for i in lib/*.so; do 31 | install -vD "$i" "$out/lib/$(basename "$i")" 32 | done 33 | ''; 34 | } 35 | 36 | -------------------------------------------------------------------------------- /upgrade.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | #nixos-rebuild switch --upgrade 4 | nixos-rebuild boot --upgrade 5 | 6 | sleep 5 7 | 8 | kbuildsycoca4 --noincremental 9 | 10 | # OR 11 | # nix-channel --update 12 | # nixos-rebuild switch 13 | -------------------------------------------------------------------------------- /useStable.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | nix-channel --add https://nixos.org/channels/nixos-18.09 nixos 4 | #nixos-rebuild switch --upgrade 5 | 6 | -------------------------------------------------------------------------------- /useUnstable.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | nix-channel --add https://nixos.org/channels/nixos-unstable nixos 4 | #nixos-rebuild switch --upgrade 5 | 6 | -------------------------------------------------------------------------------- /useUnstableSmall.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | nix-channel --add https://nixos.org/channels/nixos-unstable-small nixos 4 | #nixos-rebuild switch --upgrade 5 | 6 | --------------------------------------------------------------------------------