├── .github ├── dco.yml └── workflows │ └── continuous-integration-build.yml ├── complete ├── settings.gradle ├── src │ ├── main │ │ ├── resources │ │ │ └── application.properties │ │ └── java │ │ │ └── com │ │ │ └── example │ │ │ └── testingweb │ │ │ ├── GreetingService.java │ │ │ ├── HomeController.java │ │ │ ├── TestingWebApplication.java │ │ │ └── GreetingController.java │ └── test │ │ └── java │ │ └── com │ │ └── example │ │ └── testingweb │ │ ├── SmokeTest.java │ │ ├── TestingWebApplicationTest.java │ │ ├── WebLayerTest.java │ │ ├── HttpRequestTest.java │ │ └── WebMockTest.java ├── gradle │ └── wrapper │ │ ├── gradle-wrapper.jar │ │ └── gradle-wrapper.properties ├── .mvn │ └── wrapper │ │ └── maven-wrapper.properties ├── build.gradle ├── pom.xml ├── gradlew.bat ├── mvnw.cmd ├── gradlew └── mvnw ├── initial ├── settings.gradle ├── src │ ├── main │ │ ├── resources │ │ │ └── application.properties │ │ └── java │ │ │ └── com │ │ │ └── example │ │ │ └── testingweb │ │ │ └── TestingWebApplication.java │ └── test │ │ └── java │ │ └── com │ │ └── example │ │ └── testingweb │ │ └── TestingWebApplicationTests.java ├── gradle │ └── wrapper │ │ ├── gradle-wrapper.jar │ │ └── gradle-wrapper.properties ├── .mvn │ └── wrapper │ │ └── maven-wrapper.properties ├── build.gradle ├── pom.xml ├── gradlew.bat ├── mvnw.cmd ├── gradlew └── mvnw ├── initial-kotlin ├── settings.gradle.kts ├── src │ ├── main │ │ ├── resources │ │ │ └── application.properties │ │ └── kotlin │ │ │ └── com │ │ │ └── example │ │ │ └── testingweb │ │ │ └── TestingWebApplication.kt │ └── test │ │ └── kotlin │ │ └── com │ │ └── example │ │ └── testingweb │ │ └── TestingWebApplicationTests.kt ├── gradle │ └── wrapper │ │ ├── gradle-wrapper.jar │ │ └── gradle-wrapper.properties ├── build.gradle.kts ├── gradlew.bat └── gradlew ├── complete-kotlin ├── settings.gradle.kts ├── src │ ├── main │ │ ├── resources │ │ │ └── application.properties │ │ └── kotlin │ │ │ └── com │ │ │ └── example │ │ │ └── testingweb │ │ │ ├── GreetingService.kt │ │ │ ├── HomeController.kt │ │ │ ├── TestingWebApplication.kt │ │ │ └── GreetingController.kt │ └── test │ │ └── kotlin │ │ └── com │ │ └── example │ │ └── testingweb │ │ ├── SmokeTest.kt │ │ ├── TestingWebApplicationTest.kt │ │ ├── WebLayerTest.kt │ │ ├── HttpRequestTest.kt │ │ └── WebMockTest.kt ├── gradle │ └── wrapper │ │ ├── gradle-wrapper.jar │ │ └── gradle-wrapper.properties ├── build.gradle.kts ├── gradlew.bat └── gradlew ├── LICENSE.writing.txt ├── CONTRIBUTING.adoc ├── test └── run.sh ├── .gitignore ├── README.adoc └── LICENSE.txt /.github/dco.yml: -------------------------------------------------------------------------------- 1 | require: 2 | members: false 3 | -------------------------------------------------------------------------------- /complete/settings.gradle: -------------------------------------------------------------------------------- 1 | rootProject.name = 'testing-web' 2 | -------------------------------------------------------------------------------- /initial/settings.gradle: -------------------------------------------------------------------------------- 1 | rootProject.name = 'testing-web' 2 | -------------------------------------------------------------------------------- /initial-kotlin/settings.gradle.kts: -------------------------------------------------------------------------------- 1 | rootProject.name = "testing-web" -------------------------------------------------------------------------------- /complete-kotlin/settings.gradle.kts: -------------------------------------------------------------------------------- 1 | rootProject.name = "testing-web" 2 | -------------------------------------------------------------------------------- /complete/src/main/resources/application.properties: -------------------------------------------------------------------------------- 1 | spring.application.name=testing-web 2 | -------------------------------------------------------------------------------- /initial/src/main/resources/application.properties: -------------------------------------------------------------------------------- 1 | spring.application.name=testing-web 2 | -------------------------------------------------------------------------------- /complete-kotlin/src/main/resources/application.properties: -------------------------------------------------------------------------------- 1 | spring.application.name=testing-web 2 | -------------------------------------------------------------------------------- /initial-kotlin/src/main/resources/application.properties: -------------------------------------------------------------------------------- 1 | spring.application.name=testing-web 2 | -------------------------------------------------------------------------------- /LICENSE.writing.txt: -------------------------------------------------------------------------------- 1 | Except where otherwise noted, this work is licensed under https://creativecommons.org/licenses/by-nd/3.0/ 2 | -------------------------------------------------------------------------------- /complete/gradle/wrapper/gradle-wrapper.jar: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/spring-guides/gs-testing-web/HEAD/complete/gradle/wrapper/gradle-wrapper.jar -------------------------------------------------------------------------------- /initial/gradle/wrapper/gradle-wrapper.jar: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/spring-guides/gs-testing-web/HEAD/initial/gradle/wrapper/gradle-wrapper.jar -------------------------------------------------------------------------------- /complete-kotlin/gradle/wrapper/gradle-wrapper.jar: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/spring-guides/gs-testing-web/HEAD/complete-kotlin/gradle/wrapper/gradle-wrapper.jar -------------------------------------------------------------------------------- /initial-kotlin/gradle/wrapper/gradle-wrapper.jar: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/spring-guides/gs-testing-web/HEAD/initial-kotlin/gradle/wrapper/gradle-wrapper.jar -------------------------------------------------------------------------------- /complete/.mvn/wrapper/maven-wrapper.properties: -------------------------------------------------------------------------------- 1 | wrapperVersion=3.3.4 2 | distributionType=only-script 3 | distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.11/apache-maven-3.9.11-bin.zip 4 | -------------------------------------------------------------------------------- /initial/.mvn/wrapper/maven-wrapper.properties: -------------------------------------------------------------------------------- 1 | wrapperVersion=3.3.4 2 | distributionType=only-script 3 | distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.11/apache-maven-3.9.11-bin.zip 4 | -------------------------------------------------------------------------------- /complete-kotlin/src/main/kotlin/com/example/testingweb/GreetingService.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.springframework.stereotype.Service 4 | 5 | @Service 6 | class GreetingService { 7 | fun greet(): String = "Hello, World" 8 | } 9 | -------------------------------------------------------------------------------- /complete/src/main/java/com/example/testingweb/GreetingService.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.springframework.stereotype.Service; 4 | 5 | @Service 6 | public class GreetingService { 7 | public String greet() { 8 | return "Hello, World"; 9 | } 10 | } 11 | -------------------------------------------------------------------------------- /initial/gradle/wrapper/gradle-wrapper.properties: -------------------------------------------------------------------------------- 1 | distributionBase=GRADLE_USER_HOME 2 | distributionPath=wrapper/dists 3 | distributionUrl=https\://services.gradle.org/distributions/gradle-9.2.1-bin.zip 4 | networkTimeout=10000 5 | validateDistributionUrl=true 6 | zipStoreBase=GRADLE_USER_HOME 7 | zipStorePath=wrapper/dists 8 | -------------------------------------------------------------------------------- /complete/gradle/wrapper/gradle-wrapper.properties: -------------------------------------------------------------------------------- 1 | distributionBase=GRADLE_USER_HOME 2 | distributionPath=wrapper/dists 3 | distributionUrl=https\://services.gradle.org/distributions/gradle-9.2.1-bin.zip 4 | networkTimeout=10000 5 | validateDistributionUrl=true 6 | zipStoreBase=GRADLE_USER_HOME 7 | zipStorePath=wrapper/dists 8 | -------------------------------------------------------------------------------- /complete-kotlin/gradle/wrapper/gradle-wrapper.properties: -------------------------------------------------------------------------------- 1 | distributionBase=GRADLE_USER_HOME 2 | distributionPath=wrapper/dists 3 | distributionUrl=https\://services.gradle.org/distributions/gradle-9.2.1-bin.zip 4 | networkTimeout=10000 5 | validateDistributionUrl=true 6 | zipStoreBase=GRADLE_USER_HOME 7 | zipStorePath=wrapper/dists 8 | -------------------------------------------------------------------------------- /initial-kotlin/gradle/wrapper/gradle-wrapper.properties: -------------------------------------------------------------------------------- 1 | distributionBase=GRADLE_USER_HOME 2 | distributionPath=wrapper/dists 3 | distributionUrl=https\://services.gradle.org/distributions/gradle-9.2.1-bin.zip 4 | networkTimeout=10000 5 | validateDistributionUrl=true 6 | zipStoreBase=GRADLE_USER_HOME 7 | zipStorePath=wrapper/dists 8 | -------------------------------------------------------------------------------- /initial-kotlin/src/test/kotlin/com/example/testingweb/TestingWebApplicationTests.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.junit.jupiter.api.Test 4 | import org.springframework.boot.test.context.SpringBootTest 5 | 6 | @SpringBootTest 7 | class TestingWebApplicationTests { 8 | 9 | @Test 10 | fun contextLoads() { 11 | } 12 | } 13 | -------------------------------------------------------------------------------- /initial/src/test/java/com/example/testingweb/TestingWebApplicationTests.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.junit.jupiter.api.Test; 4 | 5 | import org.springframework.boot.test.context.SpringBootTest; 6 | 7 | @SpringBootTest 8 | class TestingWebApplicationTests { 9 | 10 | @Test 11 | void contextLoads() { 12 | } 13 | 14 | } 15 | -------------------------------------------------------------------------------- /complete-kotlin/src/main/kotlin/com/example/testingweb/HomeController.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.springframework.web.bind.annotation.GetMapping 4 | import org.springframework.web.bind.annotation.RestController 5 | 6 | @RestController 7 | class HomeController { 8 | 9 | @GetMapping("/") 10 | fun greeting(): String = "Hello, World" 11 | } 12 | -------------------------------------------------------------------------------- /CONTRIBUTING.adoc: -------------------------------------------------------------------------------- 1 | All commits must include a __Signed-off-by__ trailer at the end of each commit message to indicate that the contributor agrees to the Developer Certificate of Origin. 2 | For additional details, please refer to the blog post https://spring.io/blog/2025/01/06/hello-dco-goodbye-cla-simplifying-contributions-to-spring[Hello DCO, Goodbye CLA: Simplifying Contributions to Spring]. 3 | -------------------------------------------------------------------------------- /complete-kotlin/src/main/kotlin/com/example/testingweb/TestingWebApplication.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.springframework.boot.autoconfigure.SpringBootApplication 4 | import org.springframework.boot.runApplication 5 | 6 | @SpringBootApplication 7 | class TestingWebApplication 8 | 9 | fun main(args: Array) { 10 | runApplication(*args) 11 | } 12 | -------------------------------------------------------------------------------- /complete/src/main/java/com/example/testingweb/HomeController.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.springframework.web.bind.annotation.GetMapping; 4 | import org.springframework.web.bind.annotation.RestController; 5 | 6 | @RestController 7 | public class HomeController { 8 | 9 | @GetMapping("/") 10 | public String greeting() { 11 | return "Hello, World"; 12 | } 13 | 14 | } 15 | -------------------------------------------------------------------------------- /initial-kotlin/src/main/kotlin/com/example/testingweb/TestingWebApplication.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.springframework.boot.autoconfigure.SpringBootApplication 4 | import org.springframework.boot.runApplication 5 | 6 | @SpringBootApplication 7 | class TestingWebApplication 8 | 9 | fun main(args: Array) { 10 | runApplication(*args) 11 | } 12 | -------------------------------------------------------------------------------- /complete-kotlin/src/main/kotlin/com/example/testingweb/GreetingController.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.springframework.web.bind.annotation.GetMapping 4 | import org.springframework.web.bind.annotation.RestController 5 | 6 | @RestController 7 | class GreetingController(private val service: GreetingService) { 8 | 9 | @GetMapping("/greeting") 10 | fun greeting(): String = service.greet() 11 | } 12 | -------------------------------------------------------------------------------- /test/run.sh: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | set -e 3 | 4 | cd "$(dirname "$0")" 5 | 6 | cd ../complete 7 | ./mvnw clean package 8 | rm -rf target 9 | ./gradlew build 10 | rm -rf build 11 | 12 | cd ../complete-kotlin 13 | ./gradlew build 14 | rm -rf build 15 | 16 | cd ../initial 17 | ./mvnw clean compile 18 | rm -rf target 19 | ./gradlew compileJava 20 | rm -rf build 21 | 22 | cd ../initial-kotlin 23 | ./gradlew compileKotlin 24 | rm -rf build -------------------------------------------------------------------------------- /complete/src/main/java/com/example/testingweb/TestingWebApplication.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.springframework.boot.SpringApplication; 4 | import org.springframework.boot.autoconfigure.SpringBootApplication; 5 | 6 | @SpringBootApplication 7 | public class TestingWebApplication { 8 | 9 | public static void main(String[] args) { 10 | SpringApplication.run(TestingWebApplication.class, args); 11 | } 12 | } 13 | -------------------------------------------------------------------------------- /initial/src/main/java/com/example/testingweb/TestingWebApplication.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.springframework.boot.SpringApplication; 4 | import org.springframework.boot.autoconfigure.SpringBootApplication; 5 | 6 | @SpringBootApplication 7 | public class TestingWebApplication { 8 | 9 | public static void main(String[] args) { 10 | SpringApplication.run(TestingWebApplication.class, args); 11 | } 12 | 13 | } 14 | -------------------------------------------------------------------------------- /.gitignore: -------------------------------------------------------------------------------- 1 | # Operating System Files 2 | 3 | *.DS_Store 4 | Thumbs.db 5 | *.sw? 6 | .#* 7 | *# 8 | *~ 9 | *.sublime-* 10 | 11 | # Build Artifacts 12 | 13 | .gradle/ 14 | build/ 15 | target/ 16 | bin/ 17 | dependency-reduced-pom.xml 18 | 19 | # Eclipse Project Files 20 | 21 | .classpath 22 | .project 23 | .settings/ 24 | .sts4-cache/ 25 | .attach_pid* 26 | 27 | # IntelliJ IDEA Files 28 | 29 | *.iml 30 | *.ipr 31 | *.iws 32 | *.idea 33 | 34 | README.html 35 | -------------------------------------------------------------------------------- /complete-kotlin/src/test/kotlin/com/example/testingweb/SmokeTest.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.assertj.core.api.Assertions.assertThat 4 | import org.junit.jupiter.api.Test 5 | import org.springframework.beans.factory.annotation.Autowired 6 | import org.springframework.boot.test.context.SpringBootTest 7 | 8 | @SpringBootTest 9 | class SmokeTest { 10 | 11 | @Autowired 12 | private lateinit var controller: HomeController 13 | 14 | @Test 15 | fun contextLoads() { 16 | assertThat(controller).isNotNull() 17 | } 18 | } -------------------------------------------------------------------------------- /complete/src/test/java/com/example/testingweb/SmokeTest.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import static org.assertj.core.api.Assertions.assertThat; 4 | 5 | import org.junit.jupiter.api.Test; 6 | 7 | import org.springframework.beans.factory.annotation.Autowired; 8 | import org.springframework.boot.test.context.SpringBootTest; 9 | 10 | @SpringBootTest 11 | class SmokeTest { 12 | 13 | @Autowired 14 | private HomeController controller; 15 | 16 | @Test 17 | void contextLoads() throws Exception { 18 | assertThat(controller).isNotNull(); 19 | } 20 | } 21 | -------------------------------------------------------------------------------- /complete/src/main/java/com/example/testingweb/GreetingController.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.springframework.web.bind.annotation.GetMapping; 4 | import org.springframework.web.bind.annotation.RestController; 5 | 6 | 7 | @RestController 8 | public class GreetingController { 9 | 10 | private final GreetingService service; 11 | 12 | public GreetingController(GreetingService service) { 13 | this.service = service; 14 | } 15 | 16 | @GetMapping("/greeting") 17 | public String greeting() { 18 | return service.greet(); 19 | } 20 | 21 | } 22 | -------------------------------------------------------------------------------- /complete/src/test/java/com/example/testingweb/TestingWebApplicationTest.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.junit.jupiter.api.Test; 4 | 5 | import org.springframework.beans.factory.annotation.Autowired; 6 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient; 7 | import org.springframework.boot.test.context.SpringBootTest; 8 | import org.springframework.test.web.servlet.client.RestTestClient; 9 | 10 | @SpringBootTest 11 | @AutoConfigureRestTestClient 12 | class TestingWebApplicationTest { 13 | 14 | @Autowired 15 | private RestTestClient restTestClient; 16 | 17 | @Test 18 | void greetingShouldReturnDefaultMessage() { 19 | restTestClient.get().uri("/") 20 | .exchange() 21 | .expectBody(String.class) 22 | .isEqualTo("Hello, World"); 23 | } 24 | } 25 | -------------------------------------------------------------------------------- /complete/src/test/java/com/example/testingweb/WebLayerTest.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.junit.jupiter.api.Test; 4 | 5 | import org.springframework.beans.factory.annotation.Autowired; 6 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient; 7 | import org.springframework.boot.webmvc.test.autoconfigure.WebMvcTest; 8 | import org.springframework.test.web.servlet.client.RestTestClient; 9 | 10 | @WebMvcTest(HomeController.class) 11 | @AutoConfigureRestTestClient 12 | class WebLayerTest { 13 | 14 | @Autowired 15 | private RestTestClient restTestClient; 16 | 17 | @Test 18 | void greetingShouldReturnDefaultMessage() { 19 | restTestClient.get().uri("/") 20 | .exchange() 21 | .expectBody(String.class) 22 | .isEqualTo("Hello, World"); 23 | } 24 | } 25 | -------------------------------------------------------------------------------- /complete/build.gradle: -------------------------------------------------------------------------------- 1 | plugins { 2 | id 'java' 3 | id 'org.springframework.boot' version '4.0.0' 4 | id 'io.spring.dependency-management' version '1.1.7' 5 | } 6 | 7 | group = 'com.example' 8 | version = '0.0.1-SNAPSHOT' 9 | description = 'Demo project for Spring Boot' 10 | 11 | java { 12 | toolchain { 13 | languageVersion = JavaLanguageVersion.of(17) 14 | } 15 | } 16 | 17 | repositories { 18 | mavenCentral() 19 | } 20 | 21 | dependencies { 22 | implementation 'org.springframework.boot:spring-boot-starter-restclient' 23 | implementation 'org.springframework.boot:spring-boot-starter-webmvc' 24 | testImplementation 'org.springframework.boot:spring-boot-starter-restclient-test' 25 | testImplementation 'org.springframework.boot:spring-boot-starter-webmvc-test' 26 | } 27 | 28 | tasks.named('test') { 29 | useJUnitPlatform() 30 | } 31 | -------------------------------------------------------------------------------- /initial/build.gradle: -------------------------------------------------------------------------------- 1 | plugins { 2 | id 'java' 3 | id 'org.springframework.boot' version '4.0.0' 4 | id 'io.spring.dependency-management' version '1.1.7' 5 | } 6 | 7 | group = 'com.example' 8 | version = '0.0.1-SNAPSHOT' 9 | description = 'Demo project for Spring Boot' 10 | 11 | java { 12 | toolchain { 13 | languageVersion = JavaLanguageVersion.of(17) 14 | } 15 | } 16 | 17 | repositories { 18 | mavenCentral() 19 | } 20 | 21 | dependencies { 22 | implementation 'org.springframework.boot:spring-boot-starter-restclient' 23 | implementation 'org.springframework.boot:spring-boot-starter-webmvc' 24 | testImplementation 'org.springframework.boot:spring-boot-starter-restclient-test' 25 | testImplementation 'org.springframework.boot:spring-boot-starter-webmvc-test' 26 | } 27 | 28 | tasks.named('test') { 29 | useJUnitPlatform() 30 | } 31 | -------------------------------------------------------------------------------- /complete-kotlin/src/test/kotlin/com/example/testingweb/TestingWebApplicationTest.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.junit.jupiter.api.Test 4 | import org.springframework.beans.factory.annotation.Autowired 5 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient 6 | import org.springframework.boot.test.context.SpringBootTest 7 | import org.springframework.test.web.servlet.client.RestTestClient 8 | import org.springframework.test.web.servlet.client.expectBody 9 | 10 | @SpringBootTest 11 | @AutoConfigureRestTestClient 12 | class TestingWebApplicationTest { 13 | 14 | @Autowired 15 | private lateinit var restTestClient: RestTestClient 16 | 17 | @Test 18 | fun greetingShouldReturnDefaultMessage() { 19 | // Import Kotlin .expectBody() extension that allows using reified type parameters 20 | restTestClient.get().uri("/") 21 | .exchange() 22 | .expectBody() 23 | .isEqualTo("Hello, World") 24 | } 25 | 26 | } -------------------------------------------------------------------------------- /complete-kotlin/src/test/kotlin/com/example/testingweb/WebLayerTest.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.junit.jupiter.api.Test 4 | import org.springframework.beans.factory.annotation.Autowired 5 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient 6 | import org.springframework.boot.webmvc.test.autoconfigure.WebMvcTest 7 | import org.springframework.test.web.servlet.client.RestTestClient 8 | import org.springframework.test.web.servlet.client.expectBody 9 | 10 | @WebMvcTest(HomeController::class) 11 | @AutoConfigureRestTestClient 12 | class WebLayerTest { 13 | 14 | @Autowired 15 | private lateinit var restTestClient: RestTestClient 16 | 17 | @Test 18 | fun greetingShouldReturnDefaultMessage() { 19 | // Import Kotlin .expectBody() extension that allows using reified type parameters 20 | restTestClient.get() 21 | .uri("/") 22 | .exchange() 23 | .expectBody() 24 | .isEqualTo("Hello, World") 25 | } 26 | 27 | } 28 | -------------------------------------------------------------------------------- /complete/src/test/java/com/example/testingweb/HttpRequestTest.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.junit.jupiter.api.Test; 4 | 5 | import org.springframework.beans.factory.annotation.Autowired; 6 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient; 7 | import org.springframework.boot.test.context.SpringBootTest; 8 | import org.springframework.boot.test.context.SpringBootTest.WebEnvironment; 9 | import org.springframework.boot.test.web.server.LocalServerPort; 10 | import org.springframework.test.web.servlet.client.RestTestClient; 11 | 12 | @SpringBootTest(webEnvironment = WebEnvironment.RANDOM_PORT) 13 | @AutoConfigureRestTestClient 14 | class HttpRequestTest { 15 | 16 | @LocalServerPort 17 | private int port; 18 | 19 | @Autowired 20 | private RestTestClient restTestClient; 21 | 22 | @Test 23 | void greetingShouldReturnDefaultMessage() { 24 | restTestClient.get() 25 | .uri("http://localhost:%d/".formatted(port)) 26 | .exchange() 27 | .expectBody(String.class) 28 | .isEqualTo("Hello, World"); 29 | } 30 | } 31 | -------------------------------------------------------------------------------- /complete/src/test/java/com/example/testingweb/WebMockTest.java: -------------------------------------------------------------------------------- 1 | package com.example.testingweb; 2 | 3 | import org.junit.jupiter.api.Test; 4 | 5 | import org.springframework.beans.factory.annotation.Autowired; 6 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient; 7 | import org.springframework.boot.webmvc.test.autoconfigure.WebMvcTest; 8 | import org.springframework.test.context.bean.override.mockito.MockitoBean; 9 | import org.springframework.test.web.servlet.client.RestTestClient; 10 | 11 | import static org.mockito.Mockito.when; 12 | 13 | @WebMvcTest(GreetingController.class) 14 | @AutoConfigureRestTestClient 15 | class WebMockTest { 16 | 17 | @Autowired 18 | private RestTestClient restTestClient; 19 | 20 | @MockitoBean 21 | private GreetingService service; 22 | 23 | @Test 24 | void greetingShouldReturnMessageFromService() throws Exception { 25 | when(service.greet()).thenReturn("Hello, Mock"); 26 | restTestClient.get().uri("/greeting") 27 | .exchange() 28 | .expectBody(String.class) 29 | .isEqualTo("Hello, Mock"); 30 | } 31 | } 32 | -------------------------------------------------------------------------------- /complete-kotlin/src/test/kotlin/com/example/testingweb/HttpRequestTest.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.junit.jupiter.api.Test 4 | import org.springframework.beans.factory.annotation.Autowired 5 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient 6 | import org.springframework.boot.test.context.SpringBootTest 7 | import org.springframework.boot.test.context.SpringBootTest.WebEnvironment 8 | import org.springframework.boot.test.web.server.LocalServerPort 9 | import org.springframework.test.web.servlet.client.RestTestClient 10 | import org.springframework.test.web.servlet.client.expectBody 11 | 12 | @SpringBootTest(webEnvironment = WebEnvironment.RANDOM_PORT) 13 | @AutoConfigureRestTestClient 14 | class HttpRequestTest { 15 | 16 | @LocalServerPort 17 | private var port: Int = 0 18 | 19 | @Autowired 20 | private lateinit var restTestClient: RestTestClient 21 | 22 | @Test 23 | fun greetingShouldReturnDefaultMessage() { 24 | // Import Kotlin .expectBody() extension that allows using reified type parameters 25 | restTestClient.get() 26 | .uri("http://localhost:$port/") 27 | .exchange() 28 | .expectBody() 29 | .isEqualTo("Hello, World") 30 | } 31 | 32 | } 33 | -------------------------------------------------------------------------------- /complete-kotlin/src/test/kotlin/com/example/testingweb/WebMockTest.kt: -------------------------------------------------------------------------------- 1 | package com.example.testingweb 2 | 3 | import org.junit.jupiter.api.Test 4 | import org.mockito.Mockito.`when` 5 | import org.springframework.beans.factory.annotation.Autowired 6 | import org.springframework.boot.resttestclient.autoconfigure.AutoConfigureRestTestClient 7 | import org.springframework.boot.webmvc.test.autoconfigure.WebMvcTest 8 | import org.springframework.test.context.bean.override.mockito.MockitoBean 9 | import org.springframework.test.web.servlet.client.RestTestClient 10 | import org.springframework.test.web.servlet.client.expectBody 11 | 12 | @WebMvcTest(GreetingController::class) 13 | @AutoConfigureRestTestClient 14 | class WebMockTest { 15 | 16 | @Autowired 17 | private lateinit var restTestClient: RestTestClient 18 | 19 | @MockitoBean 20 | private lateinit var service: GreetingService 21 | 22 | @Test 23 | fun greetingShouldReturnMessageFromService() { 24 | `when`(service.greet()).thenReturn("Hello, Mock") 25 | // Import Kotlin .expectBody() extension that allows using reified type parameters 26 | restTestClient.get() 27 | .uri("/greeting") 28 | .exchange() 29 | .expectBody() 30 | .isEqualTo("Hello, Mock") 31 | } 32 | } 33 | -------------------------------------------------------------------------------- /.github/workflows/continuous-integration-build.yml: -------------------------------------------------------------------------------- 1 | name: CI Build 2 | 3 | on: 4 | push: 5 | branches: 6 | - main 7 | pull_request: 8 | branches: 9 | - main 10 | 11 | jobs: 12 | build: 13 | name: Build Main Branch 14 | runs-on: ubuntu-latest 15 | 16 | steps: 17 | - name: Checkout source code 18 | uses: actions/checkout@v3 19 | 20 | - name: Set up JDK 17 21 | uses: actions/setup-java@v3 22 | with: 23 | java-version: '17' 24 | distribution: 'temurin' 25 | cache: maven 26 | 27 | - name: Build Initial with Maven 28 | working-directory: ./initial 29 | run: ./mvnw --batch-mode clean package 30 | 31 | - name: Build Initial with Gradle 32 | working-directory: ./initial 33 | run: ./gradlew build 34 | 35 | - name: Build Initial Kotlin with Gradle 36 | working-directory: ./initial-kotlin 37 | run: ./gradlew build 38 | 39 | - name: Build Complete with Maven 40 | working-directory: ./complete 41 | run: ./mvnw --batch-mode clean package 42 | 43 | - name: Build Complete with Gradle 44 | working-directory: ./complete 45 | run: ./gradlew build 46 | 47 | - name: Build Complete Kotlin with Gradle 48 | working-directory: ./complete-kotlin 49 | run: ./gradlew build 50 | -------------------------------------------------------------------------------- /complete-kotlin/build.gradle.kts: -------------------------------------------------------------------------------- 1 | plugins { 2 | kotlin("jvm") version "2.2.21" 3 | kotlin("plugin.spring") version "2.2.21" 4 | id("org.springframework.boot") version "4.0.0" 5 | id("io.spring.dependency-management") version "1.1.7" 6 | } 7 | 8 | group = "com.example" 9 | version = "0.0.1-SNAPSHOT" 10 | description = "Demo project for Spring Boot" 11 | 12 | java { 13 | toolchain { 14 | languageVersion = JavaLanguageVersion.of(17) 15 | } 16 | } 17 | 18 | repositories { 19 | mavenCentral() 20 | } 21 | 22 | dependencies { 23 | implementation("org.springframework.boot:spring-boot-starter-restclient") 24 | implementation("org.springframework.boot:spring-boot-starter-webmvc") 25 | implementation("org.jetbrains.kotlin:kotlin-reflect") 26 | implementation("tools.jackson.module:jackson-module-kotlin") 27 | testImplementation("org.springframework.boot:spring-boot-starter-restclient-test") 28 | testImplementation("org.springframework.boot:spring-boot-starter-webmvc-test") 29 | testImplementation("org.jetbrains.kotlin:kotlin-test-junit5") 30 | testRuntimeOnly("org.junit.platform:junit-platform-launcher") 31 | } 32 | 33 | kotlin { 34 | compilerOptions { 35 | freeCompilerArgs.addAll("-Xjsr305=strict", "-Xannotation-default-target=param-property") 36 | } 37 | } 38 | 39 | tasks.withType { 40 | useJUnitPlatform() 41 | } 42 | -------------------------------------------------------------------------------- /initial-kotlin/build.gradle.kts: -------------------------------------------------------------------------------- 1 | plugins { 2 | kotlin("jvm") version "2.2.21" 3 | kotlin("plugin.spring") version "2.2.21" 4 | id("org.springframework.boot") version "4.0.0" 5 | id("io.spring.dependency-management") version "1.1.7" 6 | } 7 | 8 | group = "com.example" 9 | version = "0.0.1-SNAPSHOT" 10 | description = "Demo project for Spring Boot" 11 | 12 | java { 13 | toolchain { 14 | languageVersion = JavaLanguageVersion.of(17) 15 | } 16 | } 17 | 18 | repositories { 19 | mavenCentral() 20 | } 21 | 22 | dependencies { 23 | implementation("org.springframework.boot:spring-boot-starter-restclient") 24 | implementation("org.springframework.boot:spring-boot-starter-webmvc") 25 | implementation("org.jetbrains.kotlin:kotlin-reflect") 26 | implementation("tools.jackson.module:jackson-module-kotlin") 27 | testImplementation("org.springframework.boot:spring-boot-starter-restclient-test") 28 | testImplementation("org.springframework.boot:spring-boot-starter-webmvc-test") 29 | testImplementation("org.jetbrains.kotlin:kotlin-test-junit5") 30 | testRuntimeOnly("org.junit.platform:junit-platform-launcher") 31 | } 32 | 33 | kotlin { 34 | compilerOptions { 35 | freeCompilerArgs.addAll("-Xjsr305=strict", "-Xannotation-default-target=param-property") 36 | } 37 | } 38 | 39 | tasks.withType { 40 | useJUnitPlatform() 41 | } 42 | -------------------------------------------------------------------------------- /initial/pom.xml: -------------------------------------------------------------------------------- 1 | 2 | 4 | 4.0.0 5 | 6 | org.springframework.boot 7 | spring-boot-starter-parent 8 | 4.0.0 9 | 10 | 11 | com.example 12 | testing-web-initial 13 | 0.0.1-SNAPSHOT 14 | testing-web-initial 15 | Demo project for Spring Boot 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 17 31 | 32 | 33 | 34 | org.springframework.boot 35 | spring-boot-starter-restclient 36 | 37 | 38 | org.springframework.boot 39 | spring-boot-starter-webmvc 40 | 41 | 42 | 43 | org.springframework.boot 44 | spring-boot-starter-restclient-test 45 | test 46 | 47 | 48 | org.springframework.boot 49 | spring-boot-starter-webmvc-test 50 | test 51 | 52 | 53 | 54 | 55 | 56 | 57 | org.springframework.boot 58 | spring-boot-maven-plugin 59 | 60 | 61 | 62 | 63 | 64 | -------------------------------------------------------------------------------- /complete/pom.xml: -------------------------------------------------------------------------------- 1 | 2 | 4 | 4.0.0 5 | 6 | org.springframework.boot 7 | spring-boot-starter-parent 8 | 4.0.0 9 | 10 | 11 | com.example 12 | testing-web-complete 13 | 0.0.1-SNAPSHOT 14 | testing-web-complete 15 | Demo project for Spring Boot 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 17 31 | 32 | 33 | 34 | 35 | org.springframework.boot 36 | spring-boot-starter-restclient 37 | 38 | 39 | org.springframework.boot 40 | spring-boot-starter-webmvc 41 | 42 | 43 | 44 | org.springframework.boot 45 | spring-boot-starter-restclient-test 46 | test 47 | 48 | 49 | org.springframework.boot 50 | spring-boot-starter-webmvc-test 51 | test 52 | 53 | 54 | 55 | 56 | 57 | 58 | org.springframework.boot 59 | spring-boot-maven-plugin 60 | 61 | 62 | 63 | 64 | 65 | -------------------------------------------------------------------------------- /complete/gradlew.bat: -------------------------------------------------------------------------------- 1 | @rem 2 | @rem Copyright 2015 the original author or authors. 3 | @rem 4 | @rem Licensed under the Apache License, Version 2.0 (the "License"); 5 | @rem you may not use this file except in compliance with the License. 6 | @rem You may obtain a copy of the License at 7 | @rem 8 | @rem https://www.apache.org/licenses/LICENSE-2.0 9 | @rem 10 | @rem Unless required by applicable law or agreed to in writing, software 11 | @rem distributed under the License is distributed on an "AS IS" BASIS, 12 | @rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 | @rem See the License for the specific language governing permissions and 14 | @rem limitations under the License. 15 | @rem 16 | @rem SPDX-License-Identifier: Apache-2.0 17 | @rem 18 | 19 | @if "%DEBUG%"=="" @echo off 20 | @rem ########################################################################## 21 | @rem 22 | @rem Gradle startup script for Windows 23 | @rem 24 | @rem ########################################################################## 25 | 26 | @rem Set local scope for the variables with windows NT shell 27 | if "%OS%"=="Windows_NT" setlocal 28 | 29 | set DIRNAME=%~dp0 30 | if "%DIRNAME%"=="" set DIRNAME=. 31 | @rem This is normally unused 32 | set APP_BASE_NAME=%~n0 33 | set APP_HOME=%DIRNAME% 34 | 35 | @rem Resolve any "." and ".." in APP_HOME to make it shorter. 36 | for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi 37 | 38 | @rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 39 | set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m" 40 | 41 | @rem Find java.exe 42 | if defined JAVA_HOME goto findJavaFromJavaHome 43 | 44 | set JAVA_EXE=java.exe 45 | %JAVA_EXE% -version >NUL 2>&1 46 | if %ERRORLEVEL% equ 0 goto execute 47 | 48 | echo. 1>&2 49 | echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2 50 | echo. 1>&2 51 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 52 | echo location of your Java installation. 1>&2 53 | 54 | goto fail 55 | 56 | :findJavaFromJavaHome 57 | set JAVA_HOME=%JAVA_HOME:"=% 58 | set JAVA_EXE=%JAVA_HOME%/bin/java.exe 59 | 60 | if exist "%JAVA_EXE%" goto execute 61 | 62 | echo. 1>&2 63 | echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2 64 | echo. 1>&2 65 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 66 | echo location of your Java installation. 1>&2 67 | 68 | goto fail 69 | 70 | :execute 71 | @rem Setup the command line 72 | 73 | set CLASSPATH= 74 | 75 | 76 | @rem Execute Gradle 77 | "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" -jar "%APP_HOME%\gradle\wrapper\gradle-wrapper.jar" %* 78 | 79 | :end 80 | @rem End local scope for the variables with windows NT shell 81 | if %ERRORLEVEL% equ 0 goto mainEnd 82 | 83 | :fail 84 | rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of 85 | rem the _cmd.exe /c_ return code! 86 | set EXIT_CODE=%ERRORLEVEL% 87 | if %EXIT_CODE% equ 0 set EXIT_CODE=1 88 | if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE% 89 | exit /b %EXIT_CODE% 90 | 91 | :mainEnd 92 | if "%OS%"=="Windows_NT" endlocal 93 | 94 | :omega 95 | -------------------------------------------------------------------------------- /initial/gradlew.bat: -------------------------------------------------------------------------------- 1 | @rem 2 | @rem Copyright 2015 the original author or authors. 3 | @rem 4 | @rem Licensed under the Apache License, Version 2.0 (the "License"); 5 | @rem you may not use this file except in compliance with the License. 6 | @rem You may obtain a copy of the License at 7 | @rem 8 | @rem https://www.apache.org/licenses/LICENSE-2.0 9 | @rem 10 | @rem Unless required by applicable law or agreed to in writing, software 11 | @rem distributed under the License is distributed on an "AS IS" BASIS, 12 | @rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 | @rem See the License for the specific language governing permissions and 14 | @rem limitations under the License. 15 | @rem 16 | @rem SPDX-License-Identifier: Apache-2.0 17 | @rem 18 | 19 | @if "%DEBUG%"=="" @echo off 20 | @rem ########################################################################## 21 | @rem 22 | @rem Gradle startup script for Windows 23 | @rem 24 | @rem ########################################################################## 25 | 26 | @rem Set local scope for the variables with windows NT shell 27 | if "%OS%"=="Windows_NT" setlocal 28 | 29 | set DIRNAME=%~dp0 30 | if "%DIRNAME%"=="" set DIRNAME=. 31 | @rem This is normally unused 32 | set APP_BASE_NAME=%~n0 33 | set APP_HOME=%DIRNAME% 34 | 35 | @rem Resolve any "." and ".." in APP_HOME to make it shorter. 36 | for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi 37 | 38 | @rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 39 | set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m" 40 | 41 | @rem Find java.exe 42 | if defined JAVA_HOME goto findJavaFromJavaHome 43 | 44 | set JAVA_EXE=java.exe 45 | %JAVA_EXE% -version >NUL 2>&1 46 | if %ERRORLEVEL% equ 0 goto execute 47 | 48 | echo. 1>&2 49 | echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2 50 | echo. 1>&2 51 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 52 | echo location of your Java installation. 1>&2 53 | 54 | goto fail 55 | 56 | :findJavaFromJavaHome 57 | set JAVA_HOME=%JAVA_HOME:"=% 58 | set JAVA_EXE=%JAVA_HOME%/bin/java.exe 59 | 60 | if exist "%JAVA_EXE%" goto execute 61 | 62 | echo. 1>&2 63 | echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2 64 | echo. 1>&2 65 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 66 | echo location of your Java installation. 1>&2 67 | 68 | goto fail 69 | 70 | :execute 71 | @rem Setup the command line 72 | 73 | set CLASSPATH= 74 | 75 | 76 | @rem Execute Gradle 77 | "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" -jar "%APP_HOME%\gradle\wrapper\gradle-wrapper.jar" %* 78 | 79 | :end 80 | @rem End local scope for the variables with windows NT shell 81 | if %ERRORLEVEL% equ 0 goto mainEnd 82 | 83 | :fail 84 | rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of 85 | rem the _cmd.exe /c_ return code! 86 | set EXIT_CODE=%ERRORLEVEL% 87 | if %EXIT_CODE% equ 0 set EXIT_CODE=1 88 | if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE% 89 | exit /b %EXIT_CODE% 90 | 91 | :mainEnd 92 | if "%OS%"=="Windows_NT" endlocal 93 | 94 | :omega 95 | -------------------------------------------------------------------------------- /complete-kotlin/gradlew.bat: -------------------------------------------------------------------------------- 1 | @rem 2 | @rem Copyright 2015 the original author or authors. 3 | @rem 4 | @rem Licensed under the Apache License, Version 2.0 (the "License"); 5 | @rem you may not use this file except in compliance with the License. 6 | @rem You may obtain a copy of the License at 7 | @rem 8 | @rem https://www.apache.org/licenses/LICENSE-2.0 9 | @rem 10 | @rem Unless required by applicable law or agreed to in writing, software 11 | @rem distributed under the License is distributed on an "AS IS" BASIS, 12 | @rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 | @rem See the License for the specific language governing permissions and 14 | @rem limitations under the License. 15 | @rem 16 | @rem SPDX-License-Identifier: Apache-2.0 17 | @rem 18 | 19 | @if "%DEBUG%"=="" @echo off 20 | @rem ########################################################################## 21 | @rem 22 | @rem Gradle startup script for Windows 23 | @rem 24 | @rem ########################################################################## 25 | 26 | @rem Set local scope for the variables with windows NT shell 27 | if "%OS%"=="Windows_NT" setlocal 28 | 29 | set DIRNAME=%~dp0 30 | if "%DIRNAME%"=="" set DIRNAME=. 31 | @rem This is normally unused 32 | set APP_BASE_NAME=%~n0 33 | set APP_HOME=%DIRNAME% 34 | 35 | @rem Resolve any "." and ".." in APP_HOME to make it shorter. 36 | for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi 37 | 38 | @rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 39 | set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m" 40 | 41 | @rem Find java.exe 42 | if defined JAVA_HOME goto findJavaFromJavaHome 43 | 44 | set JAVA_EXE=java.exe 45 | %JAVA_EXE% -version >NUL 2>&1 46 | if %ERRORLEVEL% equ 0 goto execute 47 | 48 | echo. 1>&2 49 | echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2 50 | echo. 1>&2 51 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 52 | echo location of your Java installation. 1>&2 53 | 54 | goto fail 55 | 56 | :findJavaFromJavaHome 57 | set JAVA_HOME=%JAVA_HOME:"=% 58 | set JAVA_EXE=%JAVA_HOME%/bin/java.exe 59 | 60 | if exist "%JAVA_EXE%" goto execute 61 | 62 | echo. 1>&2 63 | echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2 64 | echo. 1>&2 65 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 66 | echo location of your Java installation. 1>&2 67 | 68 | goto fail 69 | 70 | :execute 71 | @rem Setup the command line 72 | 73 | set CLASSPATH= 74 | 75 | 76 | @rem Execute Gradle 77 | "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" -jar "%APP_HOME%\gradle\wrapper\gradle-wrapper.jar" %* 78 | 79 | :end 80 | @rem End local scope for the variables with windows NT shell 81 | if %ERRORLEVEL% equ 0 goto mainEnd 82 | 83 | :fail 84 | rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of 85 | rem the _cmd.exe /c_ return code! 86 | set EXIT_CODE=%ERRORLEVEL% 87 | if %EXIT_CODE% equ 0 set EXIT_CODE=1 88 | if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE% 89 | exit /b %EXIT_CODE% 90 | 91 | :mainEnd 92 | if "%OS%"=="Windows_NT" endlocal 93 | 94 | :omega 95 | -------------------------------------------------------------------------------- /initial-kotlin/gradlew.bat: -------------------------------------------------------------------------------- 1 | @rem 2 | @rem Copyright 2015 the original author or authors. 3 | @rem 4 | @rem Licensed under the Apache License, Version 2.0 (the "License"); 5 | @rem you may not use this file except in compliance with the License. 6 | @rem You may obtain a copy of the License at 7 | @rem 8 | @rem https://www.apache.org/licenses/LICENSE-2.0 9 | @rem 10 | @rem Unless required by applicable law or agreed to in writing, software 11 | @rem distributed under the License is distributed on an "AS IS" BASIS, 12 | @rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 | @rem See the License for the specific language governing permissions and 14 | @rem limitations under the License. 15 | @rem 16 | @rem SPDX-License-Identifier: Apache-2.0 17 | @rem 18 | 19 | @if "%DEBUG%"=="" @echo off 20 | @rem ########################################################################## 21 | @rem 22 | @rem Gradle startup script for Windows 23 | @rem 24 | @rem ########################################################################## 25 | 26 | @rem Set local scope for the variables with windows NT shell 27 | if "%OS%"=="Windows_NT" setlocal 28 | 29 | set DIRNAME=%~dp0 30 | if "%DIRNAME%"=="" set DIRNAME=. 31 | @rem This is normally unused 32 | set APP_BASE_NAME=%~n0 33 | set APP_HOME=%DIRNAME% 34 | 35 | @rem Resolve any "." and ".." in APP_HOME to make it shorter. 36 | for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi 37 | 38 | @rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 39 | set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m" 40 | 41 | @rem Find java.exe 42 | if defined JAVA_HOME goto findJavaFromJavaHome 43 | 44 | set JAVA_EXE=java.exe 45 | %JAVA_EXE% -version >NUL 2>&1 46 | if %ERRORLEVEL% equ 0 goto execute 47 | 48 | echo. 1>&2 49 | echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2 50 | echo. 1>&2 51 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 52 | echo location of your Java installation. 1>&2 53 | 54 | goto fail 55 | 56 | :findJavaFromJavaHome 57 | set JAVA_HOME=%JAVA_HOME:"=% 58 | set JAVA_EXE=%JAVA_HOME%/bin/java.exe 59 | 60 | if exist "%JAVA_EXE%" goto execute 61 | 62 | echo. 1>&2 63 | echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2 64 | echo. 1>&2 65 | echo Please set the JAVA_HOME variable in your environment to match the 1>&2 66 | echo location of your Java installation. 1>&2 67 | 68 | goto fail 69 | 70 | :execute 71 | @rem Setup the command line 72 | 73 | set CLASSPATH= 74 | 75 | 76 | @rem Execute Gradle 77 | "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" -jar "%APP_HOME%\gradle\wrapper\gradle-wrapper.jar" %* 78 | 79 | :end 80 | @rem End local scope for the variables with windows NT shell 81 | if %ERRORLEVEL% equ 0 goto mainEnd 82 | 83 | :fail 84 | rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of 85 | rem the _cmd.exe /c_ return code! 86 | set EXIT_CODE=%ERRORLEVEL% 87 | if %EXIT_CODE% equ 0 set EXIT_CODE=1 88 | if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE% 89 | exit /b %EXIT_CODE% 90 | 91 | :mainEnd 92 | if "%OS%"=="Windows_NT" endlocal 93 | 94 | :omega 95 | -------------------------------------------------------------------------------- /initial/mvnw.cmd: -------------------------------------------------------------------------------- 1 | <# : batch portion 2 | @REM ---------------------------------------------------------------------------- 3 | @REM Licensed to the Apache Software Foundation (ASF) under one 4 | @REM or more contributor license agreements. See the NOTICE file 5 | @REM distributed with this work for additional information 6 | @REM regarding copyright ownership. The ASF licenses this file 7 | @REM to you under the Apache License, Version 2.0 (the 8 | @REM "License"); you may not use this file except in compliance 9 | @REM with the License. You may obtain a copy of the License at 10 | @REM 11 | @REM http://www.apache.org/licenses/LICENSE-2.0 12 | @REM 13 | @REM Unless required by applicable law or agreed to in writing, 14 | @REM software distributed under the License is distributed on an 15 | @REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 | @REM KIND, either express or implied. See the License for the 17 | @REM specific language governing permissions and limitations 18 | @REM under the License. 19 | @REM ---------------------------------------------------------------------------- 20 | 21 | @REM ---------------------------------------------------------------------------- 22 | @REM Apache Maven Wrapper startup batch script, version 3.3.4 23 | @REM 24 | @REM Optional ENV vars 25 | @REM MVNW_REPOURL - repo url base for downloading maven distribution 26 | @REM MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven 27 | @REM MVNW_VERBOSE - true: enable verbose log; others: silence the output 28 | @REM ---------------------------------------------------------------------------- 29 | 30 | @IF "%__MVNW_ARG0_NAME__%"=="" (SET __MVNW_ARG0_NAME__=%~nx0) 31 | @SET __MVNW_CMD__= 32 | @SET __MVNW_ERROR__= 33 | @SET __MVNW_PSMODULEP_SAVE=%PSModulePath% 34 | @SET PSModulePath= 35 | @FOR /F "usebackq tokens=1* delims==" %%A IN (`powershell -noprofile "& {$scriptDir='%~dp0'; $script='%__MVNW_ARG0_NAME__%'; icm -ScriptBlock ([Scriptblock]::Create((Get-Content -Raw '%~f0'))) -NoNewScope}"`) DO @( 36 | IF "%%A"=="MVN_CMD" (set __MVNW_CMD__=%%B) ELSE IF "%%B"=="" (echo %%A) ELSE (echo %%A=%%B) 37 | ) 38 | @SET PSModulePath=%__MVNW_PSMODULEP_SAVE% 39 | @SET __MVNW_PSMODULEP_SAVE= 40 | @SET __MVNW_ARG0_NAME__= 41 | @SET MVNW_USERNAME= 42 | @SET MVNW_PASSWORD= 43 | @IF NOT "%__MVNW_CMD__%"=="" ("%__MVNW_CMD__%" %*) 44 | @echo Cannot start maven from wrapper >&2 && exit /b 1 45 | @GOTO :EOF 46 | : end batch / begin powershell #> 47 | 48 | $ErrorActionPreference = "Stop" 49 | if ($env:MVNW_VERBOSE -eq "true") { 50 | $VerbosePreference = "Continue" 51 | } 52 | 53 | # calculate distributionUrl, requires .mvn/wrapper/maven-wrapper.properties 54 | $distributionUrl = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionUrl 55 | if (!$distributionUrl) { 56 | Write-Error "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties" 57 | } 58 | 59 | switch -wildcard -casesensitive ( $($distributionUrl -replace '^.*/','') ) { 60 | "maven-mvnd-*" { 61 | $USE_MVND = $true 62 | $distributionUrl = $distributionUrl -replace '-bin\.[^.]*$',"-windows-amd64.zip" 63 | $MVN_CMD = "mvnd.cmd" 64 | break 65 | } 66 | default { 67 | $USE_MVND = $false 68 | $MVN_CMD = $script -replace '^mvnw','mvn' 69 | break 70 | } 71 | } 72 | 73 | # apply MVNW_REPOURL and calculate MAVEN_HOME 74 | # maven home pattern: ~/.m2/wrapper/dists/{apache-maven-,maven-mvnd--}/ 75 | if ($env:MVNW_REPOURL) { 76 | $MVNW_REPO_PATTERN = if ($USE_MVND -eq $False) { "/org/apache/maven/" } else { "/maven/mvnd/" } 77 | $distributionUrl = "$env:MVNW_REPOURL$MVNW_REPO_PATTERN$($distributionUrl -replace "^.*$MVNW_REPO_PATTERN",'')" 78 | } 79 | $distributionUrlName = $distributionUrl -replace '^.*/','' 80 | $distributionUrlNameMain = $distributionUrlName -replace '\.[^.]*$','' -replace '-bin$','' 81 | 82 | $MAVEN_M2_PATH = "$HOME/.m2" 83 | if ($env:MAVEN_USER_HOME) { 84 | $MAVEN_M2_PATH = "$env:MAVEN_USER_HOME" 85 | } 86 | 87 | if (-not (Test-Path -Path $MAVEN_M2_PATH)) { 88 | New-Item -Path $MAVEN_M2_PATH -ItemType Directory | Out-Null 89 | } 90 | 91 | $MAVEN_WRAPPER_DISTS = $null 92 | if ((Get-Item $MAVEN_M2_PATH).Target[0] -eq $null) { 93 | $MAVEN_WRAPPER_DISTS = "$MAVEN_M2_PATH/wrapper/dists" 94 | } else { 95 | $MAVEN_WRAPPER_DISTS = (Get-Item $MAVEN_M2_PATH).Target[0] + "/wrapper/dists" 96 | } 97 | 98 | $MAVEN_HOME_PARENT = "$MAVEN_WRAPPER_DISTS/$distributionUrlNameMain" 99 | $MAVEN_HOME_NAME = ([System.Security.Cryptography.SHA256]::Create().ComputeHash([byte[]][char[]]$distributionUrl) | ForEach-Object {$_.ToString("x2")}) -join '' 100 | $MAVEN_HOME = "$MAVEN_HOME_PARENT/$MAVEN_HOME_NAME" 101 | 102 | if (Test-Path -Path "$MAVEN_HOME" -PathType Container) { 103 | Write-Verbose "found existing MAVEN_HOME at $MAVEN_HOME" 104 | Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD" 105 | exit $? 106 | } 107 | 108 | if (! $distributionUrlNameMain -or ($distributionUrlName -eq $distributionUrlNameMain)) { 109 | Write-Error "distributionUrl is not valid, must end with *-bin.zip, but found $distributionUrl" 110 | } 111 | 112 | # prepare tmp dir 113 | $TMP_DOWNLOAD_DIR_HOLDER = New-TemporaryFile 114 | $TMP_DOWNLOAD_DIR = New-Item -Itemtype Directory -Path "$TMP_DOWNLOAD_DIR_HOLDER.dir" 115 | $TMP_DOWNLOAD_DIR_HOLDER.Delete() | Out-Null 116 | trap { 117 | if ($TMP_DOWNLOAD_DIR.Exists) { 118 | try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null } 119 | catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" } 120 | } 121 | } 122 | 123 | New-Item -Itemtype Directory -Path "$MAVEN_HOME_PARENT" -Force | Out-Null 124 | 125 | # Download and Install Apache Maven 126 | Write-Verbose "Couldn't find MAVEN_HOME, downloading and installing it ..." 127 | Write-Verbose "Downloading from: $distributionUrl" 128 | Write-Verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName" 129 | 130 | $webclient = New-Object System.Net.WebClient 131 | if ($env:MVNW_USERNAME -and $env:MVNW_PASSWORD) { 132 | $webclient.Credentials = New-Object System.Net.NetworkCredential($env:MVNW_USERNAME, $env:MVNW_PASSWORD) 133 | } 134 | [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12 135 | $webclient.DownloadFile($distributionUrl, "$TMP_DOWNLOAD_DIR/$distributionUrlName") | Out-Null 136 | 137 | # If specified, validate the SHA-256 sum of the Maven distribution zip file 138 | $distributionSha256Sum = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionSha256Sum 139 | if ($distributionSha256Sum) { 140 | if ($USE_MVND) { 141 | Write-Error "Checksum validation is not supported for maven-mvnd. `nPlease disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." 142 | } 143 | Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function Get-FileHash 144 | if ((Get-FileHash "$TMP_DOWNLOAD_DIR/$distributionUrlName" -Algorithm SHA256).Hash.ToLower() -ne $distributionSha256Sum) { 145 | Write-Error "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised. If you updated your Maven version, you need to update the specified distributionSha256Sum property." 146 | } 147 | } 148 | 149 | # unzip and move 150 | Expand-Archive "$TMP_DOWNLOAD_DIR/$distributionUrlName" -DestinationPath "$TMP_DOWNLOAD_DIR" | Out-Null 151 | 152 | # Find the actual extracted directory name (handles snapshots where filename != directory name) 153 | $actualDistributionDir = "" 154 | 155 | # First try the expected directory name (for regular distributions) 156 | $expectedPath = Join-Path "$TMP_DOWNLOAD_DIR" "$distributionUrlNameMain" 157 | $expectedMvnPath = Join-Path "$expectedPath" "bin/$MVN_CMD" 158 | if ((Test-Path -Path $expectedPath -PathType Container) -and (Test-Path -Path $expectedMvnPath -PathType Leaf)) { 159 | $actualDistributionDir = $distributionUrlNameMain 160 | } 161 | 162 | # If not found, search for any directory with the Maven executable (for snapshots) 163 | if (!$actualDistributionDir) { 164 | Get-ChildItem -Path "$TMP_DOWNLOAD_DIR" -Directory | ForEach-Object { 165 | $testPath = Join-Path $_.FullName "bin/$MVN_CMD" 166 | if (Test-Path -Path $testPath -PathType Leaf) { 167 | $actualDistributionDir = $_.Name 168 | } 169 | } 170 | } 171 | 172 | if (!$actualDistributionDir) { 173 | Write-Error "Could not find Maven distribution directory in extracted archive" 174 | } 175 | 176 | Write-Verbose "Found extracted Maven distribution directory: $actualDistributionDir" 177 | Rename-Item -Path "$TMP_DOWNLOAD_DIR/$actualDistributionDir" -NewName $MAVEN_HOME_NAME | Out-Null 178 | try { 179 | Move-Item -Path "$TMP_DOWNLOAD_DIR/$MAVEN_HOME_NAME" -Destination $MAVEN_HOME_PARENT | Out-Null 180 | } catch { 181 | if (! (Test-Path -Path "$MAVEN_HOME" -PathType Container)) { 182 | Write-Error "fail to move MAVEN_HOME" 183 | } 184 | } finally { 185 | try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null } 186 | catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" } 187 | } 188 | 189 | Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD" 190 | -------------------------------------------------------------------------------- /complete/mvnw.cmd: -------------------------------------------------------------------------------- 1 | <# : batch portion 2 | @REM ---------------------------------------------------------------------------- 3 | @REM Licensed to the Apache Software Foundation (ASF) under one 4 | @REM or more contributor license agreements. See the NOTICE file 5 | @REM distributed with this work for additional information 6 | @REM regarding copyright ownership. The ASF licenses this file 7 | @REM to you under the Apache License, Version 2.0 (the 8 | @REM "License"); you may not use this file except in compliance 9 | @REM with the License. You may obtain a copy of the License at 10 | @REM 11 | @REM http://www.apache.org/licenses/LICENSE-2.0 12 | @REM 13 | @REM Unless required by applicable law or agreed to in writing, 14 | @REM software distributed under the License is distributed on an 15 | @REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 | @REM KIND, either express or implied. See the License for the 17 | @REM specific language governing permissions and limitations 18 | @REM under the License. 19 | @REM ---------------------------------------------------------------------------- 20 | 21 | @REM ---------------------------------------------------------------------------- 22 | @REM Apache Maven Wrapper startup batch script, version 3.3.4 23 | @REM 24 | @REM Optional ENV vars 25 | @REM MVNW_REPOURL - repo url base for downloading maven distribution 26 | @REM MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven 27 | @REM MVNW_VERBOSE - true: enable verbose log; others: silence the output 28 | @REM ---------------------------------------------------------------------------- 29 | 30 | @IF "%__MVNW_ARG0_NAME__%"=="" (SET __MVNW_ARG0_NAME__=%~nx0) 31 | @SET __MVNW_CMD__= 32 | @SET __MVNW_ERROR__= 33 | @SET __MVNW_PSMODULEP_SAVE=%PSModulePath% 34 | @SET PSModulePath= 35 | @FOR /F "usebackq tokens=1* delims==" %%A IN (`powershell -noprofile "& {$scriptDir='%~dp0'; $script='%__MVNW_ARG0_NAME__%'; icm -ScriptBlock ([Scriptblock]::Create((Get-Content -Raw '%~f0'))) -NoNewScope}"`) DO @( 36 | IF "%%A"=="MVN_CMD" (set __MVNW_CMD__=%%B) ELSE IF "%%B"=="" (echo %%A) ELSE (echo %%A=%%B) 37 | ) 38 | @SET PSModulePath=%__MVNW_PSMODULEP_SAVE% 39 | @SET __MVNW_PSMODULEP_SAVE= 40 | @SET __MVNW_ARG0_NAME__= 41 | @SET MVNW_USERNAME= 42 | @SET MVNW_PASSWORD= 43 | @IF NOT "%__MVNW_CMD__%"=="" ("%__MVNW_CMD__%" %*) 44 | @echo Cannot start maven from wrapper >&2 && exit /b 1 45 | @GOTO :EOF 46 | : end batch / begin powershell #> 47 | 48 | $ErrorActionPreference = "Stop" 49 | if ($env:MVNW_VERBOSE -eq "true") { 50 | $VerbosePreference = "Continue" 51 | } 52 | 53 | # calculate distributionUrl, requires .mvn/wrapper/maven-wrapper.properties 54 | $distributionUrl = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionUrl 55 | if (!$distributionUrl) { 56 | Write-Error "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties" 57 | } 58 | 59 | switch -wildcard -casesensitive ( $($distributionUrl -replace '^.*/','') ) { 60 | "maven-mvnd-*" { 61 | $USE_MVND = $true 62 | $distributionUrl = $distributionUrl -replace '-bin\.[^.]*$',"-windows-amd64.zip" 63 | $MVN_CMD = "mvnd.cmd" 64 | break 65 | } 66 | default { 67 | $USE_MVND = $false 68 | $MVN_CMD = $script -replace '^mvnw','mvn' 69 | break 70 | } 71 | } 72 | 73 | # apply MVNW_REPOURL and calculate MAVEN_HOME 74 | # maven home pattern: ~/.m2/wrapper/dists/{apache-maven-,maven-mvnd--}/ 75 | if ($env:MVNW_REPOURL) { 76 | $MVNW_REPO_PATTERN = if ($USE_MVND -eq $False) { "/org/apache/maven/" } else { "/maven/mvnd/" } 77 | $distributionUrl = "$env:MVNW_REPOURL$MVNW_REPO_PATTERN$($distributionUrl -replace "^.*$MVNW_REPO_PATTERN",'')" 78 | } 79 | $distributionUrlName = $distributionUrl -replace '^.*/','' 80 | $distributionUrlNameMain = $distributionUrlName -replace '\.[^.]*$','' -replace '-bin$','' 81 | 82 | $MAVEN_M2_PATH = "$HOME/.m2" 83 | if ($env:MAVEN_USER_HOME) { 84 | $MAVEN_M2_PATH = "$env:MAVEN_USER_HOME" 85 | } 86 | 87 | if (-not (Test-Path -Path $MAVEN_M2_PATH)) { 88 | New-Item -Path $MAVEN_M2_PATH -ItemType Directory | Out-Null 89 | } 90 | 91 | $MAVEN_WRAPPER_DISTS = $null 92 | if ((Get-Item $MAVEN_M2_PATH).Target[0] -eq $null) { 93 | $MAVEN_WRAPPER_DISTS = "$MAVEN_M2_PATH/wrapper/dists" 94 | } else { 95 | $MAVEN_WRAPPER_DISTS = (Get-Item $MAVEN_M2_PATH).Target[0] + "/wrapper/dists" 96 | } 97 | 98 | $MAVEN_HOME_PARENT = "$MAVEN_WRAPPER_DISTS/$distributionUrlNameMain" 99 | $MAVEN_HOME_NAME = ([System.Security.Cryptography.SHA256]::Create().ComputeHash([byte[]][char[]]$distributionUrl) | ForEach-Object {$_.ToString("x2")}) -join '' 100 | $MAVEN_HOME = "$MAVEN_HOME_PARENT/$MAVEN_HOME_NAME" 101 | 102 | if (Test-Path -Path "$MAVEN_HOME" -PathType Container) { 103 | Write-Verbose "found existing MAVEN_HOME at $MAVEN_HOME" 104 | Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD" 105 | exit $? 106 | } 107 | 108 | if (! $distributionUrlNameMain -or ($distributionUrlName -eq $distributionUrlNameMain)) { 109 | Write-Error "distributionUrl is not valid, must end with *-bin.zip, but found $distributionUrl" 110 | } 111 | 112 | # prepare tmp dir 113 | $TMP_DOWNLOAD_DIR_HOLDER = New-TemporaryFile 114 | $TMP_DOWNLOAD_DIR = New-Item -Itemtype Directory -Path "$TMP_DOWNLOAD_DIR_HOLDER.dir" 115 | $TMP_DOWNLOAD_DIR_HOLDER.Delete() | Out-Null 116 | trap { 117 | if ($TMP_DOWNLOAD_DIR.Exists) { 118 | try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null } 119 | catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" } 120 | } 121 | } 122 | 123 | New-Item -Itemtype Directory -Path "$MAVEN_HOME_PARENT" -Force | Out-Null 124 | 125 | # Download and Install Apache Maven 126 | Write-Verbose "Couldn't find MAVEN_HOME, downloading and installing it ..." 127 | Write-Verbose "Downloading from: $distributionUrl" 128 | Write-Verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName" 129 | 130 | $webclient = New-Object System.Net.WebClient 131 | if ($env:MVNW_USERNAME -and $env:MVNW_PASSWORD) { 132 | $webclient.Credentials = New-Object System.Net.NetworkCredential($env:MVNW_USERNAME, $env:MVNW_PASSWORD) 133 | } 134 | [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12 135 | $webclient.DownloadFile($distributionUrl, "$TMP_DOWNLOAD_DIR/$distributionUrlName") | Out-Null 136 | 137 | # If specified, validate the SHA-256 sum of the Maven distribution zip file 138 | $distributionSha256Sum = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionSha256Sum 139 | if ($distributionSha256Sum) { 140 | if ($USE_MVND) { 141 | Write-Error "Checksum validation is not supported for maven-mvnd. `nPlease disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." 142 | } 143 | Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function Get-FileHash 144 | if ((Get-FileHash "$TMP_DOWNLOAD_DIR/$distributionUrlName" -Algorithm SHA256).Hash.ToLower() -ne $distributionSha256Sum) { 145 | Write-Error "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised. If you updated your Maven version, you need to update the specified distributionSha256Sum property." 146 | } 147 | } 148 | 149 | # unzip and move 150 | Expand-Archive "$TMP_DOWNLOAD_DIR/$distributionUrlName" -DestinationPath "$TMP_DOWNLOAD_DIR" | Out-Null 151 | 152 | # Find the actual extracted directory name (handles snapshots where filename != directory name) 153 | $actualDistributionDir = "" 154 | 155 | # First try the expected directory name (for regular distributions) 156 | $expectedPath = Join-Path "$TMP_DOWNLOAD_DIR" "$distributionUrlNameMain" 157 | $expectedMvnPath = Join-Path "$expectedPath" "bin/$MVN_CMD" 158 | if ((Test-Path -Path $expectedPath -PathType Container) -and (Test-Path -Path $expectedMvnPath -PathType Leaf)) { 159 | $actualDistributionDir = $distributionUrlNameMain 160 | } 161 | 162 | # If not found, search for any directory with the Maven executable (for snapshots) 163 | if (!$actualDistributionDir) { 164 | Get-ChildItem -Path "$TMP_DOWNLOAD_DIR" -Directory | ForEach-Object { 165 | $testPath = Join-Path $_.FullName "bin/$MVN_CMD" 166 | if (Test-Path -Path $testPath -PathType Leaf) { 167 | $actualDistributionDir = $_.Name 168 | } 169 | } 170 | } 171 | 172 | if (!$actualDistributionDir) { 173 | Write-Error "Could not find Maven distribution directory in extracted archive" 174 | } 175 | 176 | Write-Verbose "Found extracted Maven distribution directory: $actualDistributionDir" 177 | Rename-Item -Path "$TMP_DOWNLOAD_DIR/$actualDistributionDir" -NewName $MAVEN_HOME_NAME | Out-Null 178 | try { 179 | Move-Item -Path "$TMP_DOWNLOAD_DIR/$MAVEN_HOME_NAME" -Destination $MAVEN_HOME_PARENT | Out-Null 180 | } catch { 181 | if (! (Test-Path -Path "$MAVEN_HOME" -PathType Container)) { 182 | Write-Error "fail to move MAVEN_HOME" 183 | } 184 | } finally { 185 | try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null } 186 | catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" } 187 | } 188 | 189 | Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD" 190 | -------------------------------------------------------------------------------- /initial/gradlew: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | # 4 | # Copyright © 2015-2021 the original authors. 5 | # 6 | # Licensed under the Apache License, Version 2.0 (the "License"); 7 | # you may not use this file except in compliance with the License. 8 | # You may obtain a copy of the License at 9 | # 10 | # https://www.apache.org/licenses/LICENSE-2.0 11 | # 12 | # Unless required by applicable law or agreed to in writing, software 13 | # distributed under the License is distributed on an "AS IS" BASIS, 14 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 | # See the License for the specific language governing permissions and 16 | # limitations under the License. 17 | # 18 | # SPDX-License-Identifier: Apache-2.0 19 | # 20 | 21 | ############################################################################## 22 | # 23 | # Gradle start up script for POSIX generated by Gradle. 24 | # 25 | # Important for running: 26 | # 27 | # (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is 28 | # noncompliant, but you have some other compliant shell such as ksh or 29 | # bash, then to run this script, type that shell name before the whole 30 | # command line, like: 31 | # 32 | # ksh Gradle 33 | # 34 | # Busybox and similar reduced shells will NOT work, because this script 35 | # requires all of these POSIX shell features: 36 | # * functions; 37 | # * expansions «$var», «${var}», «${var:-default}», «${var+SET}», 38 | # «${var#prefix}», «${var%suffix}», and «$( cmd )»; 39 | # * compound commands having a testable exit status, especially «case»; 40 | # * various built-in commands including «command», «set», and «ulimit». 41 | # 42 | # Important for patching: 43 | # 44 | # (2) This script targets any POSIX shell, so it avoids extensions provided 45 | # by Bash, Ksh, etc; in particular arrays are avoided. 46 | # 47 | # The "traditional" practice of packing multiple parameters into a 48 | # space-separated string is a well documented source of bugs and security 49 | # problems, so this is (mostly) avoided, by progressively accumulating 50 | # options in "$@", and eventually passing that to Java. 51 | # 52 | # Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS, 53 | # and GRADLE_OPTS) rely on word-splitting, this is performed explicitly; 54 | # see the in-line comments for details. 55 | # 56 | # There are tweaks for specific operating systems such as AIX, CygWin, 57 | # Darwin, MinGW, and NonStop. 58 | # 59 | # (3) This script is generated from the Groovy template 60 | # https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt 61 | # within the Gradle project. 62 | # 63 | # You can find Gradle at https://github.com/gradle/gradle/. 64 | # 65 | ############################################################################## 66 | 67 | # Attempt to set APP_HOME 68 | 69 | # Resolve links: $0 may be a link 70 | app_path=$0 71 | 72 | # Need this for daisy-chained symlinks. 73 | while 74 | APP_HOME=${app_path%"${app_path##*/}"} # leaves a trailing /; empty if no leading path 75 | [ -h "$app_path" ] 76 | do 77 | ls=$( ls -ld "$app_path" ) 78 | link=${ls#*' -> '} 79 | case $link in #( 80 | /*) app_path=$link ;; #( 81 | *) app_path=$APP_HOME$link ;; 82 | esac 83 | done 84 | 85 | # This is normally unused 86 | # shellcheck disable=SC2034 87 | APP_BASE_NAME=${0##*/} 88 | # Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036) 89 | APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit 90 | 91 | # Use the maximum available, or set MAX_FD != -1 to use that value. 92 | MAX_FD=maximum 93 | 94 | warn () { 95 | echo "$*" 96 | } >&2 97 | 98 | die () { 99 | echo 100 | echo "$*" 101 | echo 102 | exit 1 103 | } >&2 104 | 105 | # OS specific support (must be 'true' or 'false'). 106 | cygwin=false 107 | msys=false 108 | darwin=false 109 | nonstop=false 110 | case "$( uname )" in #( 111 | CYGWIN* ) cygwin=true ;; #( 112 | Darwin* ) darwin=true ;; #( 113 | MSYS* | MINGW* ) msys=true ;; #( 114 | NONSTOP* ) nonstop=true ;; 115 | esac 116 | 117 | CLASSPATH="\\\"\\\"" 118 | 119 | 120 | # Determine the Java command to use to start the JVM. 121 | if [ -n "$JAVA_HOME" ] ; then 122 | if [ -x "$JAVA_HOME/jre/sh/java" ] ; then 123 | # IBM's JDK on AIX uses strange locations for the executables 124 | JAVACMD=$JAVA_HOME/jre/sh/java 125 | else 126 | JAVACMD=$JAVA_HOME/bin/java 127 | fi 128 | if [ ! -x "$JAVACMD" ] ; then 129 | die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME 130 | 131 | Please set the JAVA_HOME variable in your environment to match the 132 | location of your Java installation." 133 | fi 134 | else 135 | JAVACMD=java 136 | if ! command -v java >/dev/null 2>&1 137 | then 138 | die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 139 | 140 | Please set the JAVA_HOME variable in your environment to match the 141 | location of your Java installation." 142 | fi 143 | fi 144 | 145 | # Increase the maximum file descriptors if we can. 146 | if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then 147 | case $MAX_FD in #( 148 | max*) 149 | # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked. 150 | # shellcheck disable=SC2039,SC3045 151 | MAX_FD=$( ulimit -H -n ) || 152 | warn "Could not query maximum file descriptor limit" 153 | esac 154 | case $MAX_FD in #( 155 | '' | soft) :;; #( 156 | *) 157 | # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked. 158 | # shellcheck disable=SC2039,SC3045 159 | ulimit -n "$MAX_FD" || 160 | warn "Could not set maximum file descriptor limit to $MAX_FD" 161 | esac 162 | fi 163 | 164 | # Collect all arguments for the java command, stacking in reverse order: 165 | # * args from the command line 166 | # * the main class name 167 | # * -classpath 168 | # * -D...appname settings 169 | # * --module-path (only if needed) 170 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables. 171 | 172 | # For Cygwin or MSYS, switch paths to Windows format before running java 173 | if "$cygwin" || "$msys" ; then 174 | APP_HOME=$( cygpath --path --mixed "$APP_HOME" ) 175 | CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" ) 176 | 177 | JAVACMD=$( cygpath --unix "$JAVACMD" ) 178 | 179 | # Now convert the arguments - kludge to limit ourselves to /bin/sh 180 | for arg do 181 | if 182 | case $arg in #( 183 | -*) false ;; # don't mess with options #( 184 | /?*) t=${arg#/} t=/${t%%/*} # looks like a POSIX filepath 185 | [ -e "$t" ] ;; #( 186 | *) false ;; 187 | esac 188 | then 189 | arg=$( cygpath --path --ignore --mixed "$arg" ) 190 | fi 191 | # Roll the args list around exactly as many times as the number of 192 | # args, so each arg winds up back in the position where it started, but 193 | # possibly modified. 194 | # 195 | # NB: a `for` loop captures its iteration list before it begins, so 196 | # changing the positional parameters here affects neither the number of 197 | # iterations, nor the values presented in `arg`. 198 | shift # remove old arg 199 | set -- "$@" "$arg" # push replacement arg 200 | done 201 | fi 202 | 203 | 204 | # Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 205 | DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"' 206 | 207 | # Collect all arguments for the java command: 208 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments, 209 | # and any embedded shellness will be escaped. 210 | # * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be 211 | # treated as '${Hostname}' itself on the command line. 212 | 213 | set -- \ 214 | "-Dorg.gradle.appname=$APP_BASE_NAME" \ 215 | -classpath "$CLASSPATH" \ 216 | -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \ 217 | "$@" 218 | 219 | # Stop when "xargs" is not available. 220 | if ! command -v xargs >/dev/null 2>&1 221 | then 222 | die "xargs is not available" 223 | fi 224 | 225 | # Use "xargs" to parse quoted args. 226 | # 227 | # With -n1 it outputs one arg per line, with the quotes and backslashes removed. 228 | # 229 | # In Bash we could simply go: 230 | # 231 | # readarray ARGS < <( xargs -n1 <<<"$var" ) && 232 | # set -- "${ARGS[@]}" "$@" 233 | # 234 | # but POSIX shell has neither arrays nor command substitution, so instead we 235 | # post-process each arg (as a line of input to sed) to backslash-escape any 236 | # character that might be a shell metacharacter, then use eval to reverse 237 | # that process (while maintaining the separation between arguments), and wrap 238 | # the whole thing up as a single "set" statement. 239 | # 240 | # This will of course break if any of these variables contains a newline or 241 | # an unmatched quote. 242 | # 243 | 244 | eval "set -- $( 245 | printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" | 246 | xargs -n1 | 247 | sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' | 248 | tr '\n' ' ' 249 | )" '"$@"' 250 | 251 | exec "$JAVACMD" "$@" 252 | -------------------------------------------------------------------------------- /complete/gradlew: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | # 4 | # Copyright © 2015-2021 the original authors. 5 | # 6 | # Licensed under the Apache License, Version 2.0 (the "License"); 7 | # you may not use this file except in compliance with the License. 8 | # You may obtain a copy of the License at 9 | # 10 | # https://www.apache.org/licenses/LICENSE-2.0 11 | # 12 | # Unless required by applicable law or agreed to in writing, software 13 | # distributed under the License is distributed on an "AS IS" BASIS, 14 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 | # See the License for the specific language governing permissions and 16 | # limitations under the License. 17 | # 18 | # SPDX-License-Identifier: Apache-2.0 19 | # 20 | 21 | ############################################################################## 22 | # 23 | # Gradle start up script for POSIX generated by Gradle. 24 | # 25 | # Important for running: 26 | # 27 | # (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is 28 | # noncompliant, but you have some other compliant shell such as ksh or 29 | # bash, then to run this script, type that shell name before the whole 30 | # command line, like: 31 | # 32 | # ksh Gradle 33 | # 34 | # Busybox and similar reduced shells will NOT work, because this script 35 | # requires all of these POSIX shell features: 36 | # * functions; 37 | # * expansions «$var», «${var}», «${var:-default}», «${var+SET}», 38 | # «${var#prefix}», «${var%suffix}», and «$( cmd )»; 39 | # * compound commands having a testable exit status, especially «case»; 40 | # * various built-in commands including «command», «set», and «ulimit». 41 | # 42 | # Important for patching: 43 | # 44 | # (2) This script targets any POSIX shell, so it avoids extensions provided 45 | # by Bash, Ksh, etc; in particular arrays are avoided. 46 | # 47 | # The "traditional" practice of packing multiple parameters into a 48 | # space-separated string is a well documented source of bugs and security 49 | # problems, so this is (mostly) avoided, by progressively accumulating 50 | # options in "$@", and eventually passing that to Java. 51 | # 52 | # Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS, 53 | # and GRADLE_OPTS) rely on word-splitting, this is performed explicitly; 54 | # see the in-line comments for details. 55 | # 56 | # There are tweaks for specific operating systems such as AIX, CygWin, 57 | # Darwin, MinGW, and NonStop. 58 | # 59 | # (3) This script is generated from the Groovy template 60 | # https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt 61 | # within the Gradle project. 62 | # 63 | # You can find Gradle at https://github.com/gradle/gradle/. 64 | # 65 | ############################################################################## 66 | 67 | # Attempt to set APP_HOME 68 | 69 | # Resolve links: $0 may be a link 70 | app_path=$0 71 | 72 | # Need this for daisy-chained symlinks. 73 | while 74 | APP_HOME=${app_path%"${app_path##*/}"} # leaves a trailing /; empty if no leading path 75 | [ -h "$app_path" ] 76 | do 77 | ls=$( ls -ld "$app_path" ) 78 | link=${ls#*' -> '} 79 | case $link in #( 80 | /*) app_path=$link ;; #( 81 | *) app_path=$APP_HOME$link ;; 82 | esac 83 | done 84 | 85 | # This is normally unused 86 | # shellcheck disable=SC2034 87 | APP_BASE_NAME=${0##*/} 88 | # Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036) 89 | APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit 90 | 91 | # Use the maximum available, or set MAX_FD != -1 to use that value. 92 | MAX_FD=maximum 93 | 94 | warn () { 95 | echo "$*" 96 | } >&2 97 | 98 | die () { 99 | echo 100 | echo "$*" 101 | echo 102 | exit 1 103 | } >&2 104 | 105 | # OS specific support (must be 'true' or 'false'). 106 | cygwin=false 107 | msys=false 108 | darwin=false 109 | nonstop=false 110 | case "$( uname )" in #( 111 | CYGWIN* ) cygwin=true ;; #( 112 | Darwin* ) darwin=true ;; #( 113 | MSYS* | MINGW* ) msys=true ;; #( 114 | NONSTOP* ) nonstop=true ;; 115 | esac 116 | 117 | CLASSPATH="\\\"\\\"" 118 | 119 | 120 | # Determine the Java command to use to start the JVM. 121 | if [ -n "$JAVA_HOME" ] ; then 122 | if [ -x "$JAVA_HOME/jre/sh/java" ] ; then 123 | # IBM's JDK on AIX uses strange locations for the executables 124 | JAVACMD=$JAVA_HOME/jre/sh/java 125 | else 126 | JAVACMD=$JAVA_HOME/bin/java 127 | fi 128 | if [ ! -x "$JAVACMD" ] ; then 129 | die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME 130 | 131 | Please set the JAVA_HOME variable in your environment to match the 132 | location of your Java installation." 133 | fi 134 | else 135 | JAVACMD=java 136 | if ! command -v java >/dev/null 2>&1 137 | then 138 | die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 139 | 140 | Please set the JAVA_HOME variable in your environment to match the 141 | location of your Java installation." 142 | fi 143 | fi 144 | 145 | # Increase the maximum file descriptors if we can. 146 | if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then 147 | case $MAX_FD in #( 148 | max*) 149 | # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked. 150 | # shellcheck disable=SC2039,SC3045 151 | MAX_FD=$( ulimit -H -n ) || 152 | warn "Could not query maximum file descriptor limit" 153 | esac 154 | case $MAX_FD in #( 155 | '' | soft) :;; #( 156 | *) 157 | # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked. 158 | # shellcheck disable=SC2039,SC3045 159 | ulimit -n "$MAX_FD" || 160 | warn "Could not set maximum file descriptor limit to $MAX_FD" 161 | esac 162 | fi 163 | 164 | # Collect all arguments for the java command, stacking in reverse order: 165 | # * args from the command line 166 | # * the main class name 167 | # * -classpath 168 | # * -D...appname settings 169 | # * --module-path (only if needed) 170 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables. 171 | 172 | # For Cygwin or MSYS, switch paths to Windows format before running java 173 | if "$cygwin" || "$msys" ; then 174 | APP_HOME=$( cygpath --path --mixed "$APP_HOME" ) 175 | CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" ) 176 | 177 | JAVACMD=$( cygpath --unix "$JAVACMD" ) 178 | 179 | # Now convert the arguments - kludge to limit ourselves to /bin/sh 180 | for arg do 181 | if 182 | case $arg in #( 183 | -*) false ;; # don't mess with options #( 184 | /?*) t=${arg#/} t=/${t%%/*} # looks like a POSIX filepath 185 | [ -e "$t" ] ;; #( 186 | *) false ;; 187 | esac 188 | then 189 | arg=$( cygpath --path --ignore --mixed "$arg" ) 190 | fi 191 | # Roll the args list around exactly as many times as the number of 192 | # args, so each arg winds up back in the position where it started, but 193 | # possibly modified. 194 | # 195 | # NB: a `for` loop captures its iteration list before it begins, so 196 | # changing the positional parameters here affects neither the number of 197 | # iterations, nor the values presented in `arg`. 198 | shift # remove old arg 199 | set -- "$@" "$arg" # push replacement arg 200 | done 201 | fi 202 | 203 | 204 | # Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 205 | DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"' 206 | 207 | # Collect all arguments for the java command: 208 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments, 209 | # and any embedded shellness will be escaped. 210 | # * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be 211 | # treated as '${Hostname}' itself on the command line. 212 | 213 | set -- \ 214 | "-Dorg.gradle.appname=$APP_BASE_NAME" \ 215 | -classpath "$CLASSPATH" \ 216 | -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \ 217 | "$@" 218 | 219 | # Stop when "xargs" is not available. 220 | if ! command -v xargs >/dev/null 2>&1 221 | then 222 | die "xargs is not available" 223 | fi 224 | 225 | # Use "xargs" to parse quoted args. 226 | # 227 | # With -n1 it outputs one arg per line, with the quotes and backslashes removed. 228 | # 229 | # In Bash we could simply go: 230 | # 231 | # readarray ARGS < <( xargs -n1 <<<"$var" ) && 232 | # set -- "${ARGS[@]}" "$@" 233 | # 234 | # but POSIX shell has neither arrays nor command substitution, so instead we 235 | # post-process each arg (as a line of input to sed) to backslash-escape any 236 | # character that might be a shell metacharacter, then use eval to reverse 237 | # that process (while maintaining the separation between arguments), and wrap 238 | # the whole thing up as a single "set" statement. 239 | # 240 | # This will of course break if any of these variables contains a newline or 241 | # an unmatched quote. 242 | # 243 | 244 | eval "set -- $( 245 | printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" | 246 | xargs -n1 | 247 | sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' | 248 | tr '\n' ' ' 249 | )" '"$@"' 250 | 251 | exec "$JAVACMD" "$@" 252 | -------------------------------------------------------------------------------- /complete-kotlin/gradlew: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | # 4 | # Copyright © 2015-2021 the original authors. 5 | # 6 | # Licensed under the Apache License, Version 2.0 (the "License"); 7 | # you may not use this file except in compliance with the License. 8 | # You may obtain a copy of the License at 9 | # 10 | # https://www.apache.org/licenses/LICENSE-2.0 11 | # 12 | # Unless required by applicable law or agreed to in writing, software 13 | # distributed under the License is distributed on an "AS IS" BASIS, 14 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 | # See the License for the specific language governing permissions and 16 | # limitations under the License. 17 | # 18 | # SPDX-License-Identifier: Apache-2.0 19 | # 20 | 21 | ############################################################################## 22 | # 23 | # Gradle start up script for POSIX generated by Gradle. 24 | # 25 | # Important for running: 26 | # 27 | # (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is 28 | # noncompliant, but you have some other compliant shell such as ksh or 29 | # bash, then to run this script, type that shell name before the whole 30 | # command line, like: 31 | # 32 | # ksh Gradle 33 | # 34 | # Busybox and similar reduced shells will NOT work, because this script 35 | # requires all of these POSIX shell features: 36 | # * functions; 37 | # * expansions «$var», «${var}», «${var:-default}», «${var+SET}», 38 | # «${var#prefix}», «${var%suffix}», and «$( cmd )»; 39 | # * compound commands having a testable exit status, especially «case»; 40 | # * various built-in commands including «command», «set», and «ulimit». 41 | # 42 | # Important for patching: 43 | # 44 | # (2) This script targets any POSIX shell, so it avoids extensions provided 45 | # by Bash, Ksh, etc; in particular arrays are avoided. 46 | # 47 | # The "traditional" practice of packing multiple parameters into a 48 | # space-separated string is a well documented source of bugs and security 49 | # problems, so this is (mostly) avoided, by progressively accumulating 50 | # options in "$@", and eventually passing that to Java. 51 | # 52 | # Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS, 53 | # and GRADLE_OPTS) rely on word-splitting, this is performed explicitly; 54 | # see the in-line comments for details. 55 | # 56 | # There are tweaks for specific operating systems such as AIX, CygWin, 57 | # Darwin, MinGW, and NonStop. 58 | # 59 | # (3) This script is generated from the Groovy template 60 | # https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt 61 | # within the Gradle project. 62 | # 63 | # You can find Gradle at https://github.com/gradle/gradle/. 64 | # 65 | ############################################################################## 66 | 67 | # Attempt to set APP_HOME 68 | 69 | # Resolve links: $0 may be a link 70 | app_path=$0 71 | 72 | # Need this for daisy-chained symlinks. 73 | while 74 | APP_HOME=${app_path%"${app_path##*/}"} # leaves a trailing /; empty if no leading path 75 | [ -h "$app_path" ] 76 | do 77 | ls=$( ls -ld "$app_path" ) 78 | link=${ls#*' -> '} 79 | case $link in #( 80 | /*) app_path=$link ;; #( 81 | *) app_path=$APP_HOME$link ;; 82 | esac 83 | done 84 | 85 | # This is normally unused 86 | # shellcheck disable=SC2034 87 | APP_BASE_NAME=${0##*/} 88 | # Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036) 89 | APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit 90 | 91 | # Use the maximum available, or set MAX_FD != -1 to use that value. 92 | MAX_FD=maximum 93 | 94 | warn () { 95 | echo "$*" 96 | } >&2 97 | 98 | die () { 99 | echo 100 | echo "$*" 101 | echo 102 | exit 1 103 | } >&2 104 | 105 | # OS specific support (must be 'true' or 'false'). 106 | cygwin=false 107 | msys=false 108 | darwin=false 109 | nonstop=false 110 | case "$( uname )" in #( 111 | CYGWIN* ) cygwin=true ;; #( 112 | Darwin* ) darwin=true ;; #( 113 | MSYS* | MINGW* ) msys=true ;; #( 114 | NONSTOP* ) nonstop=true ;; 115 | esac 116 | 117 | CLASSPATH="\\\"\\\"" 118 | 119 | 120 | # Determine the Java command to use to start the JVM. 121 | if [ -n "$JAVA_HOME" ] ; then 122 | if [ -x "$JAVA_HOME/jre/sh/java" ] ; then 123 | # IBM's JDK on AIX uses strange locations for the executables 124 | JAVACMD=$JAVA_HOME/jre/sh/java 125 | else 126 | JAVACMD=$JAVA_HOME/bin/java 127 | fi 128 | if [ ! -x "$JAVACMD" ] ; then 129 | die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME 130 | 131 | Please set the JAVA_HOME variable in your environment to match the 132 | location of your Java installation." 133 | fi 134 | else 135 | JAVACMD=java 136 | if ! command -v java >/dev/null 2>&1 137 | then 138 | die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 139 | 140 | Please set the JAVA_HOME variable in your environment to match the 141 | location of your Java installation." 142 | fi 143 | fi 144 | 145 | # Increase the maximum file descriptors if we can. 146 | if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then 147 | case $MAX_FD in #( 148 | max*) 149 | # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked. 150 | # shellcheck disable=SC2039,SC3045 151 | MAX_FD=$( ulimit -H -n ) || 152 | warn "Could not query maximum file descriptor limit" 153 | esac 154 | case $MAX_FD in #( 155 | '' | soft) :;; #( 156 | *) 157 | # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked. 158 | # shellcheck disable=SC2039,SC3045 159 | ulimit -n "$MAX_FD" || 160 | warn "Could not set maximum file descriptor limit to $MAX_FD" 161 | esac 162 | fi 163 | 164 | # Collect all arguments for the java command, stacking in reverse order: 165 | # * args from the command line 166 | # * the main class name 167 | # * -classpath 168 | # * -D...appname settings 169 | # * --module-path (only if needed) 170 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables. 171 | 172 | # For Cygwin or MSYS, switch paths to Windows format before running java 173 | if "$cygwin" || "$msys" ; then 174 | APP_HOME=$( cygpath --path --mixed "$APP_HOME" ) 175 | CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" ) 176 | 177 | JAVACMD=$( cygpath --unix "$JAVACMD" ) 178 | 179 | # Now convert the arguments - kludge to limit ourselves to /bin/sh 180 | for arg do 181 | if 182 | case $arg in #( 183 | -*) false ;; # don't mess with options #( 184 | /?*) t=${arg#/} t=/${t%%/*} # looks like a POSIX filepath 185 | [ -e "$t" ] ;; #( 186 | *) false ;; 187 | esac 188 | then 189 | arg=$( cygpath --path --ignore --mixed "$arg" ) 190 | fi 191 | # Roll the args list around exactly as many times as the number of 192 | # args, so each arg winds up back in the position where it started, but 193 | # possibly modified. 194 | # 195 | # NB: a `for` loop captures its iteration list before it begins, so 196 | # changing the positional parameters here affects neither the number of 197 | # iterations, nor the values presented in `arg`. 198 | shift # remove old arg 199 | set -- "$@" "$arg" # push replacement arg 200 | done 201 | fi 202 | 203 | 204 | # Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 205 | DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"' 206 | 207 | # Collect all arguments for the java command: 208 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments, 209 | # and any embedded shellness will be escaped. 210 | # * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be 211 | # treated as '${Hostname}' itself on the command line. 212 | 213 | set -- \ 214 | "-Dorg.gradle.appname=$APP_BASE_NAME" \ 215 | -classpath "$CLASSPATH" \ 216 | -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \ 217 | "$@" 218 | 219 | # Stop when "xargs" is not available. 220 | if ! command -v xargs >/dev/null 2>&1 221 | then 222 | die "xargs is not available" 223 | fi 224 | 225 | # Use "xargs" to parse quoted args. 226 | # 227 | # With -n1 it outputs one arg per line, with the quotes and backslashes removed. 228 | # 229 | # In Bash we could simply go: 230 | # 231 | # readarray ARGS < <( xargs -n1 <<<"$var" ) && 232 | # set -- "${ARGS[@]}" "$@" 233 | # 234 | # but POSIX shell has neither arrays nor command substitution, so instead we 235 | # post-process each arg (as a line of input to sed) to backslash-escape any 236 | # character that might be a shell metacharacter, then use eval to reverse 237 | # that process (while maintaining the separation between arguments), and wrap 238 | # the whole thing up as a single "set" statement. 239 | # 240 | # This will of course break if any of these variables contains a newline or 241 | # an unmatched quote. 242 | # 243 | 244 | eval "set -- $( 245 | printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" | 246 | xargs -n1 | 247 | sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' | 248 | tr '\n' ' ' 249 | )" '"$@"' 250 | 251 | exec "$JAVACMD" "$@" 252 | -------------------------------------------------------------------------------- /initial-kotlin/gradlew: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | 3 | # 4 | # Copyright © 2015-2021 the original authors. 5 | # 6 | # Licensed under the Apache License, Version 2.0 (the "License"); 7 | # you may not use this file except in compliance with the License. 8 | # You may obtain a copy of the License at 9 | # 10 | # https://www.apache.org/licenses/LICENSE-2.0 11 | # 12 | # Unless required by applicable law or agreed to in writing, software 13 | # distributed under the License is distributed on an "AS IS" BASIS, 14 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15 | # See the License for the specific language governing permissions and 16 | # limitations under the License. 17 | # 18 | # SPDX-License-Identifier: Apache-2.0 19 | # 20 | 21 | ############################################################################## 22 | # 23 | # Gradle start up script for POSIX generated by Gradle. 24 | # 25 | # Important for running: 26 | # 27 | # (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is 28 | # noncompliant, but you have some other compliant shell such as ksh or 29 | # bash, then to run this script, type that shell name before the whole 30 | # command line, like: 31 | # 32 | # ksh Gradle 33 | # 34 | # Busybox and similar reduced shells will NOT work, because this script 35 | # requires all of these POSIX shell features: 36 | # * functions; 37 | # * expansions «$var», «${var}», «${var:-default}», «${var+SET}», 38 | # «${var#prefix}», «${var%suffix}», and «$( cmd )»; 39 | # * compound commands having a testable exit status, especially «case»; 40 | # * various built-in commands including «command», «set», and «ulimit». 41 | # 42 | # Important for patching: 43 | # 44 | # (2) This script targets any POSIX shell, so it avoids extensions provided 45 | # by Bash, Ksh, etc; in particular arrays are avoided. 46 | # 47 | # The "traditional" practice of packing multiple parameters into a 48 | # space-separated string is a well documented source of bugs and security 49 | # problems, so this is (mostly) avoided, by progressively accumulating 50 | # options in "$@", and eventually passing that to Java. 51 | # 52 | # Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS, 53 | # and GRADLE_OPTS) rely on word-splitting, this is performed explicitly; 54 | # see the in-line comments for details. 55 | # 56 | # There are tweaks for specific operating systems such as AIX, CygWin, 57 | # Darwin, MinGW, and NonStop. 58 | # 59 | # (3) This script is generated from the Groovy template 60 | # https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt 61 | # within the Gradle project. 62 | # 63 | # You can find Gradle at https://github.com/gradle/gradle/. 64 | # 65 | ############################################################################## 66 | 67 | # Attempt to set APP_HOME 68 | 69 | # Resolve links: $0 may be a link 70 | app_path=$0 71 | 72 | # Need this for daisy-chained symlinks. 73 | while 74 | APP_HOME=${app_path%"${app_path##*/}"} # leaves a trailing /; empty if no leading path 75 | [ -h "$app_path" ] 76 | do 77 | ls=$( ls -ld "$app_path" ) 78 | link=${ls#*' -> '} 79 | case $link in #( 80 | /*) app_path=$link ;; #( 81 | *) app_path=$APP_HOME$link ;; 82 | esac 83 | done 84 | 85 | # This is normally unused 86 | # shellcheck disable=SC2034 87 | APP_BASE_NAME=${0##*/} 88 | # Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036) 89 | APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit 90 | 91 | # Use the maximum available, or set MAX_FD != -1 to use that value. 92 | MAX_FD=maximum 93 | 94 | warn () { 95 | echo "$*" 96 | } >&2 97 | 98 | die () { 99 | echo 100 | echo "$*" 101 | echo 102 | exit 1 103 | } >&2 104 | 105 | # OS specific support (must be 'true' or 'false'). 106 | cygwin=false 107 | msys=false 108 | darwin=false 109 | nonstop=false 110 | case "$( uname )" in #( 111 | CYGWIN* ) cygwin=true ;; #( 112 | Darwin* ) darwin=true ;; #( 113 | MSYS* | MINGW* ) msys=true ;; #( 114 | NONSTOP* ) nonstop=true ;; 115 | esac 116 | 117 | CLASSPATH="\\\"\\\"" 118 | 119 | 120 | # Determine the Java command to use to start the JVM. 121 | if [ -n "$JAVA_HOME" ] ; then 122 | if [ -x "$JAVA_HOME/jre/sh/java" ] ; then 123 | # IBM's JDK on AIX uses strange locations for the executables 124 | JAVACMD=$JAVA_HOME/jre/sh/java 125 | else 126 | JAVACMD=$JAVA_HOME/bin/java 127 | fi 128 | if [ ! -x "$JAVACMD" ] ; then 129 | die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME 130 | 131 | Please set the JAVA_HOME variable in your environment to match the 132 | location of your Java installation." 133 | fi 134 | else 135 | JAVACMD=java 136 | if ! command -v java >/dev/null 2>&1 137 | then 138 | die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 139 | 140 | Please set the JAVA_HOME variable in your environment to match the 141 | location of your Java installation." 142 | fi 143 | fi 144 | 145 | # Increase the maximum file descriptors if we can. 146 | if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then 147 | case $MAX_FD in #( 148 | max*) 149 | # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked. 150 | # shellcheck disable=SC2039,SC3045 151 | MAX_FD=$( ulimit -H -n ) || 152 | warn "Could not query maximum file descriptor limit" 153 | esac 154 | case $MAX_FD in #( 155 | '' | soft) :;; #( 156 | *) 157 | # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked. 158 | # shellcheck disable=SC2039,SC3045 159 | ulimit -n "$MAX_FD" || 160 | warn "Could not set maximum file descriptor limit to $MAX_FD" 161 | esac 162 | fi 163 | 164 | # Collect all arguments for the java command, stacking in reverse order: 165 | # * args from the command line 166 | # * the main class name 167 | # * -classpath 168 | # * -D...appname settings 169 | # * --module-path (only if needed) 170 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables. 171 | 172 | # For Cygwin or MSYS, switch paths to Windows format before running java 173 | if "$cygwin" || "$msys" ; then 174 | APP_HOME=$( cygpath --path --mixed "$APP_HOME" ) 175 | CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" ) 176 | 177 | JAVACMD=$( cygpath --unix "$JAVACMD" ) 178 | 179 | # Now convert the arguments - kludge to limit ourselves to /bin/sh 180 | for arg do 181 | if 182 | case $arg in #( 183 | -*) false ;; # don't mess with options #( 184 | /?*) t=${arg#/} t=/${t%%/*} # looks like a POSIX filepath 185 | [ -e "$t" ] ;; #( 186 | *) false ;; 187 | esac 188 | then 189 | arg=$( cygpath --path --ignore --mixed "$arg" ) 190 | fi 191 | # Roll the args list around exactly as many times as the number of 192 | # args, so each arg winds up back in the position where it started, but 193 | # possibly modified. 194 | # 195 | # NB: a `for` loop captures its iteration list before it begins, so 196 | # changing the positional parameters here affects neither the number of 197 | # iterations, nor the values presented in `arg`. 198 | shift # remove old arg 199 | set -- "$@" "$arg" # push replacement arg 200 | done 201 | fi 202 | 203 | 204 | # Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 205 | DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"' 206 | 207 | # Collect all arguments for the java command: 208 | # * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments, 209 | # and any embedded shellness will be escaped. 210 | # * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be 211 | # treated as '${Hostname}' itself on the command line. 212 | 213 | set -- \ 214 | "-Dorg.gradle.appname=$APP_BASE_NAME" \ 215 | -classpath "$CLASSPATH" \ 216 | -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \ 217 | "$@" 218 | 219 | # Stop when "xargs" is not available. 220 | if ! command -v xargs >/dev/null 2>&1 221 | then 222 | die "xargs is not available" 223 | fi 224 | 225 | # Use "xargs" to parse quoted args. 226 | # 227 | # With -n1 it outputs one arg per line, with the quotes and backslashes removed. 228 | # 229 | # In Bash we could simply go: 230 | # 231 | # readarray ARGS < <( xargs -n1 <<<"$var" ) && 232 | # set -- "${ARGS[@]}" "$@" 233 | # 234 | # but POSIX shell has neither arrays nor command substitution, so instead we 235 | # post-process each arg (as a line of input to sed) to backslash-escape any 236 | # character that might be a shell metacharacter, then use eval to reverse 237 | # that process (while maintaining the separation between arguments), and wrap 238 | # the whole thing up as a single "set" statement. 239 | # 240 | # This will of course break if any of these variables contains a newline or 241 | # an unmatched quote. 242 | # 243 | 244 | eval "set -- $( 245 | printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" | 246 | xargs -n1 | 247 | sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' | 248 | tr '\n' ' ' 249 | )" '"$@"' 250 | 251 | exec "$JAVACMD" "$@" 252 | -------------------------------------------------------------------------------- /README.adoc: -------------------------------------------------------------------------------- 1 | :spring_version: current 2 | :DirtiesContext: https://docs.spring.io/spring/docs/{spring_version}/javadoc-api/org/springframework/test/annotation/DirtiesContext.html 3 | :toc: 4 | :icons: font 5 | :source-highlighter: prettify 6 | :project_id: gs-testing-web 7 | 8 | This guide walks you through the process of creating a Spring application and then testing it with JUnit. 9 | 10 | == What You Will Build 11 | 12 | You will build a simple Spring application and test it with JUnit. 13 | You probably already know how to write and run unit tests of the individual classes in your application, so, 14 | for this guide, we will concentrate on using Spring Test and Spring Boot features to test the interactions between Spring and your code. 15 | You will start with a simple test that the application context loads successfully and continue on to test only the web layer by using Spring's `MockMvc`. 16 | 17 | 18 | == What You Need 19 | 20 | :java_version: 17 21 | include::https://raw.githubusercontent.com/spring-guides/getting-started-macros/main/prereq_editor_jdk_buildtools.adoc[] 22 | 23 | include::https://raw.githubusercontent.com/spring-guides/getting-started-macros/main/how_to_complete_this_guide.adoc[] 24 | 25 | [[scratch]] 26 | == Starting with Spring Initializr 27 | 28 | You can use this https://start.spring.io/#!type=gradle-project&packaging=jar&jvmVersion=17&groupId=com.example&artifactId=testing-web&name=testing-web&packageName=com.example.testingweb&dependencies=web,spring-restclient[pre-initialized project] and click Generate to download a ZIP file. This project is configured to fit the examples in this tutorial. 29 | 30 | To manually initialize the project: 31 | 32 | . Navigate to https://start.spring.io. 33 | This service pulls in all the dependencies you need for an application and does most of the setup for you. 34 | . Choose either Gradle or Maven and the language you want to use. 35 | . Click *Dependencies* and select *Spring Web* and *HTTP Client*. 36 | . Click *Generate*. 37 | . Download the resulting ZIP file, which is an archive of a web application that is configured with your choices. 38 | 39 | NOTE: If your IDE has the Spring Initializr integration, you can complete this process from your IDE. 40 | 41 | NOTE: You can also fork the project from GitHub and open it in your IDE or other editor. 42 | 43 | [[initial]] 44 | == Create a Simple Application 45 | 46 | Create a new controller for your Spring application. The following listing shows how to do so: 47 | 48 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 49 | .Java 50 | ---- 51 | include::complete/src/main/java/com/example/testingweb/HomeController.java[] 52 | ---- 53 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 54 | .Kotlin 55 | ---- 56 | include::complete-kotlin/src/main/kotlin/com/example/testingweb/HomeController.kt[] 57 | ---- 58 | 59 | 60 | == Run the Application 61 | 62 | The Spring Initializr creates an application class (a class with a `main()` method) for you. 63 | For this guide, you need not modify this class. The following listing shows the application class that 64 | the Spring Initializr created: 65 | 66 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 67 | .Java 68 | ---- 69 | include::complete/src/main/java/com/example/testingweb/TestingWebApplication.java[] 70 | ---- 71 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 72 | .Kotlin 73 | ---- 74 | include::complete-kotlin/src/main/kotlin/com/example/testingweb/TestingWebApplication.kt[] 75 | ---- 76 | 77 | You can run this application class from your IDE directly, or from the command line using 78 | Gradle (`./gradlew :bootRun`) or Maven (`./mvwn spring-boot:run`). 79 | 80 | Now that the application is running, you can test it. You can load the home page at 81 | `http://localhost:8080`. However, to give yourself more confidence that the application 82 | works when you make changes, you want to automate the testing. 83 | 84 | 85 | == Test the Application 86 | 87 | Spring Boot assumes you plan to test your application, so it adds the necessary 88 | dependencies to your build file (`build.gradle` or `pom.xml`). 89 | 90 | The first thing you can do is write a simple sanity check test that will fail if the 91 | application context cannot start. The following listing shows how to do so: 92 | 93 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 94 | .Java 95 | ---- 96 | include::initial/src/test/java/com/example/testingweb/TestingWebApplicationTests.java[] 97 | ---- 98 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 99 | .Kotlin 100 | ---- 101 | include::initial-kotlin/src/test/kotlin/com/example/testingweb/TestingWebApplicationTests.kt[] 102 | ---- 103 | 104 | The `@SpringBootTest` annotation tells Spring Boot to look for a main configuration class 105 | (one with `@SpringBootApplication`, for instance) and use that to start a Spring 106 | application context. You can run this test in your IDE or on the command line (by running 107 | `./mvnw test` or `./gradlew check`), and it should pass. To convince yourself that the 108 | context is creating your controller, you could add an assertion, as the following example shows: 109 | 110 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 111 | .Java 112 | ---- 113 | include::complete/src/test/java/com/example/testingweb/SmokeTest.java[] 114 | ---- 115 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 116 | .Kotlin 117 | ---- 118 | include::complete-kotlin/src/test/kotlin/com/example/testingweb/SmokeTest.kt[] 119 | ---- 120 | 121 | Spring interprets the `@Autowired` annotation, and the controller is injected before the 122 | test methods are run. We use https://assertj.github.io/doc/[AssertJ] 123 | (which provides `assertThat()` and other methods) to express the test assertions. 124 | 125 | It is nice to have a sanity check, but you should also write some tests that assert the 126 | behavior of your application. To do that, you could start the application and listen for a 127 | connection (as it would do in production) and then send an HTTP request and assert the 128 | response. The following listing shows how to do so: 129 | 130 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 131 | .Java 132 | ---- 133 | include::complete/src/test/java/com/example/testingweb/HttpRequestTest.java[] 134 | ---- 135 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 136 | .Kotlin 137 | ---- 138 | include::complete-kotlin/src/test/kotlin/com/example/testingweb/HttpRequestTest.kt[] 139 | ---- 140 | 141 | Note the use of `webEnvironment=RANDOM_PORT` to start the server with a random port 142 | (useful to avoid conflicts in test environments) and the injection of the port with 143 | `@LocalServerPort`. Also, note that Spring Boot has automatically provided a 144 | `RestTestClient` for you because we expressed the need for it with `@AutoConfigureRestTestClient`. 145 | All you have to do after that is to add `@Autowired` to the field. 146 | 147 | Another useful approach is to not start the server at all but to test only the layer below 148 | that, where Spring handles the incoming HTTP request and hands it off to your controller. 149 | That way, almost all of the full stack is used, and your code will be called in exactly the 150 | same way as if it were processing a real HTTP request but without the cost of starting the 151 | server. To do that, we can reuse our previous test using `RestTestClient`, but this time 152 | leaving `@SpringBootTest` with its default, which is to start a mock server environment. 153 | The following listing shows how to do so: 154 | 155 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 156 | .Java 157 | ---- 158 | include::complete/src/test/java/com/example/testingweb/TestingWebApplicationTest.java[] 159 | ---- 160 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 161 | .Kotlin 162 | ---- 163 | include::complete-kotlin/src/test/kotlin/com/example/testingweb/TestingWebApplicationTest.kt[] 164 | ---- 165 | 166 | In this test, the full Spring application context is started but without the server. We 167 | can narrow the tests to only the web layer by using `@WebMvcTest`, as the following 168 | listing shows: 169 | 170 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 171 | .Java 172 | ---- 173 | include::complete/src/test/java/com/example/testingweb/WebLayerTest.java[] 174 | ---- 175 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 176 | .Kotlin 177 | ---- 178 | include::complete-kotlin/src/test/kotlin/com/example/testingweb/WebLayerTest.kt[] 179 | ---- 180 | 181 | The test assertion is the same as in the previous case. However, in this test, Spring Boot 182 | instantiates only the web layer rather than the whole context. In an application with 183 | multiple controllers, you can even ask for only one to be instantiated by using, for 184 | example, `@WebMvcTest(HomeController.class)`. 185 | 186 | So far, our `HomeController` is simple and has no dependencies. We could make it more 187 | realistic by introducing an extra component to store the greeting (perhaps in a new 188 | controller). The following example shows how to do so: 189 | 190 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 191 | .Java 192 | ---- 193 | include::complete/src/main/java/com/example/testingweb/GreetingController.java[] 194 | ---- 195 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 196 | .Kotlin 197 | ---- 198 | include::complete-kotlin/src/main/kotlin/com/example/testingweb/GreetingController.kt[] 199 | ---- 200 | 201 | Then create a greeting service, as the following listing shows: 202 | 203 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 204 | .Java 205 | ---- 206 | include::complete/src/main/java/com/example/testingweb/GreetingService.java[] 207 | ---- 208 | [source,kotlin,indent=0,subs="verbatim,quotes",role="secondary"] 209 | .Kotlin 210 | ---- 211 | include::complete-kotlin/src/main/kotlin/com/example/testingweb/GreetingService.kt[] 212 | ---- 213 | 214 | Spring automatically injects the service dependency into the controller (because of the 215 | constructor signature). The following listing shows how to test this controller 216 | with `@WebMvcTest`: 217 | 218 | [source,java,indent=0,subs="verbatim,quotes",role="primary"] 219 | .Java 220 | ---- 221 | include::complete/src/test/java/com/example/testingweb/WebMockTest.java[] 222 | ---- 223 | [source,kotlin,indent=0,subs="verbatim",role="secondary"] 224 | .Kotlin 225 | ---- 226 | include::complete-kotlin/src/test/kotlin/com/example/testingweb/WebMockTest.kt[] 227 | ---- 228 | 229 | We use `@MockitoBean` to create and inject a mock for the `GreetingService` (if you do not do 230 | so, the application context cannot start), and we set its expectations using `Mockito`. 231 | 232 | == Summary 233 | 234 | Congratulations! You have developed a Spring application and tested it with JUnit and 235 | Spring `MockMvc` and have used Spring Boot to isolate the web layer and load a special 236 | application context. 237 | 238 | == See Also 239 | 240 | The following guides may also be helpful: 241 | 242 | * https://spring.io/guides/gs/spring-boot/[Building an Application with Spring Boot] 243 | * https://spring.io/guides/gs/serving-web-content/[Serving Web Content with Spring MVC] 244 | 245 | include::https://raw.githubusercontent.com/spring-guides/getting-started-macros/main/footer.adoc[] 246 | -------------------------------------------------------------------------------- /LICENSE.txt: -------------------------------------------------------------------------------- 1 | 2 | Apache License 3 | Version 2.0, January 2004 4 | https://www.apache.org/licenses/ 5 | 6 | TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 7 | 8 | 1. Definitions. 9 | 10 | "License" shall mean the terms and conditions for use, reproduction, 11 | and distribution as defined by Sections 1 through 9 of this document. 12 | 13 | "Licensor" shall mean the copyright owner or entity authorized by 14 | the copyright owner that is granting the License. 15 | 16 | "Legal Entity" shall mean the union of the acting entity and all 17 | other entities that control, are controlled by, or are under common 18 | control with that entity. For the purposes of this definition, 19 | "control" means (i) the power, direct or indirect, to cause the 20 | direction or management of such entity, whether by contract or 21 | otherwise, or (ii) ownership of fifty percent (50%) or more of the 22 | outstanding shares, or (iii) beneficial ownership of such entity. 23 | 24 | "You" (or "Your") shall mean an individual or Legal Entity 25 | exercising permissions granted by this License. 26 | 27 | "Source" form shall mean the preferred form for making modifications, 28 | including but not limited to software source code, documentation 29 | source, and configuration files. 30 | 31 | "Object" form shall mean any form resulting from mechanical 32 | transformation or translation of a Source form, including but 33 | not limited to compiled object code, generated documentation, 34 | and conversions to other media types. 35 | 36 | "Work" shall mean the work of authorship, whether in Source or 37 | Object form, made available under the License, as indicated by a 38 | copyright notice that is included in or attached to the work 39 | (an example is provided in the Appendix below). 40 | 41 | "Derivative Works" shall mean any work, whether in Source or Object 42 | form, that is based on (or derived from) the Work and for which the 43 | editorial revisions, annotations, elaborations, or other modifications 44 | represent, as a whole, an original work of authorship. For the purposes 45 | of this License, Derivative Works shall not include works that remain 46 | separable from, or merely link (or bind by name) to the interfaces of, 47 | the Work and Derivative Works thereof. 48 | 49 | "Contribution" shall mean any work of authorship, including 50 | the original version of the Work and any modifications or additions 51 | to that Work or Derivative Works thereof, that is intentionally 52 | submitted to Licensor for inclusion in the Work by the copyright owner 53 | or by an individual or Legal Entity authorized to submit on behalf of 54 | the copyright owner. For the purposes of this definition, "submitted" 55 | means any form of electronic, verbal, or written communication sent 56 | to the Licensor or its representatives, including but not limited to 57 | communication on electronic mailing lists, source code control systems, 58 | and issue tracking systems that are managed by, or on behalf of, the 59 | Licensor for the purpose of discussing and improving the Work, but 60 | excluding communication that is conspicuously marked or otherwise 61 | designated in writing by the copyright owner as "Not a Contribution." 62 | 63 | "Contributor" shall mean Licensor and any individual or Legal Entity 64 | on behalf of whom a Contribution has been received by Licensor and 65 | subsequently incorporated within the Work. 66 | 67 | 2. Grant of Copyright License. Subject to the terms and conditions of 68 | this License, each Contributor hereby grants to You a perpetual, 69 | worldwide, non-exclusive, no-charge, royalty-free, irrevocable 70 | copyright license to reproduce, prepare Derivative Works of, 71 | publicly display, publicly perform, sublicense, and distribute the 72 | Work and such Derivative Works in Source or Object form. 73 | 74 | 3. Grant of Patent License. Subject to the terms and conditions of 75 | this License, each Contributor hereby grants to You a perpetual, 76 | worldwide, non-exclusive, no-charge, royalty-free, irrevocable 77 | (except as stated in this section) patent license to make, have made, 78 | use, offer to sell, sell, import, and otherwise transfer the Work, 79 | where such license applies only to those patent claims licensable 80 | by such Contributor that are necessarily infringed by their 81 | Contribution(s) alone or by combination of their Contribution(s) 82 | with the Work to which such Contribution(s) was submitted. If You 83 | institute patent litigation against any entity (including a 84 | cross-claim or counterclaim in a lawsuit) alleging that the Work 85 | or a Contribution incorporated within the Work constitutes direct 86 | or contributory patent infringement, then any patent licenses 87 | granted to You under this License for that Work shall terminate 88 | as of the date such litigation is filed. 89 | 90 | 4. Redistribution. You may reproduce and distribute copies of the 91 | Work or Derivative Works thereof in any medium, with or without 92 | modifications, and in Source or Object form, provided that You 93 | meet the following conditions: 94 | 95 | (a) You must give any other recipients of the Work or 96 | Derivative Works a copy of this License; and 97 | 98 | (b) You must cause any modified files to carry prominent notices 99 | stating that You changed the files; and 100 | 101 | (c) You must retain, in the Source form of any Derivative Works 102 | that You distribute, all copyright, patent, trademark, and 103 | attribution notices from the Source form of the Work, 104 | excluding those notices that do not pertain to any part of 105 | the Derivative Works; and 106 | 107 | (d) If the Work includes a "NOTICE" text file as part of its 108 | distribution, then any Derivative Works that You distribute must 109 | include a readable copy of the attribution notices contained 110 | within such NOTICE file, excluding those notices that do not 111 | pertain to any part of the Derivative Works, in at least one 112 | of the following places: within a NOTICE text file distributed 113 | as part of the Derivative Works; within the Source form or 114 | documentation, if provided along with the Derivative Works; or, 115 | within a display generated by the Derivative Works, if and 116 | wherever such third-party notices normally appear. The contents 117 | of the NOTICE file are for informational purposes only and 118 | do not modify the License. You may add Your own attribution 119 | notices within Derivative Works that You distribute, alongside 120 | or as an addendum to the NOTICE text from the Work, provided 121 | that such additional attribution notices cannot be construed 122 | as modifying the License. 123 | 124 | You may add Your own copyright statement to Your modifications and 125 | may provide additional or different license terms and conditions 126 | for use, reproduction, or distribution of Your modifications, or 127 | for any such Derivative Works as a whole, provided Your use, 128 | reproduction, and distribution of the Work otherwise complies with 129 | the conditions stated in this License. 130 | 131 | 5. Submission of Contributions. Unless You explicitly state otherwise, 132 | any Contribution intentionally submitted for inclusion in the Work 133 | by You to the Licensor shall be under the terms and conditions of 134 | this License, without any additional terms or conditions. 135 | Notwithstanding the above, nothing herein shall supersede or modify 136 | the terms of any separate license agreement you may have executed 137 | with Licensor regarding such Contributions. 138 | 139 | 6. Trademarks. This License does not grant permission to use the trade 140 | names, trademarks, service marks, or product names of the Licensor, 141 | except as required for reasonable and customary use in describing the 142 | origin of the Work and reproducing the content of the NOTICE file. 143 | 144 | 7. Disclaimer of Warranty. Unless required by applicable law or 145 | agreed to in writing, Licensor provides the Work (and each 146 | Contributor provides its Contributions) on an "AS IS" BASIS, 147 | WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or 148 | implied, including, without limitation, any warranties or conditions 149 | of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A 150 | PARTICULAR PURPOSE. You are solely responsible for determining the 151 | appropriateness of using or redistributing the Work and assume any 152 | risks associated with Your exercise of permissions under this License. 153 | 154 | 8. Limitation of Liability. In no event and under no legal theory, 155 | whether in tort (including negligence), contract, or otherwise, 156 | unless required by applicable law (such as deliberate and grossly 157 | negligent acts) or agreed to in writing, shall any Contributor be 158 | liable to You for damages, including any direct, indirect, special, 159 | incidental, or consequential damages of any character arising as a 160 | result of this License or out of the use or inability to use the 161 | Work (including but not limited to damages for loss of goodwill, 162 | work stoppage, computer failure or malfunction, or any and all 163 | other commercial damages or losses), even if such Contributor 164 | has been advised of the possibility of such damages. 165 | 166 | 9. Accepting Warranty or Additional Liability. While redistributing 167 | the Work or Derivative Works thereof, You may choose to offer, 168 | and charge a fee for, acceptance of support, warranty, indemnity, 169 | or other liability obligations and/or rights consistent with this 170 | License. However, in accepting such obligations, You may act only 171 | on Your own behalf and on Your sole responsibility, not on behalf 172 | of any other Contributor, and only if You agree to indemnify, 173 | defend, and hold each Contributor harmless for any liability 174 | incurred by, or claims asserted against, such Contributor by reason 175 | of your accepting any such warranty or additional liability. 176 | 177 | END OF TERMS AND CONDITIONS 178 | 179 | APPENDIX: How to apply the Apache License to your work. 180 | 181 | To apply the Apache License to your work, attach the following 182 | boilerplate notice, with the fields enclosed by brackets "{}" 183 | replaced with your own identifying information. (Don't include 184 | the brackets!) The text should be enclosed in the appropriate 185 | comment syntax for the file format. We also recommend that a 186 | file or class name and description of purpose be included on the 187 | same "printed page" as the copyright notice for easier 188 | identification within third-party archives. 189 | 190 | Copyright {yyyy} {name of copyright owner} 191 | 192 | Licensed under the Apache License, Version 2.0 (the "License"); 193 | you may not use this file except in compliance with the License. 194 | You may obtain a copy of the License at 195 | 196 | https://www.apache.org/licenses/LICENSE-2.0 197 | 198 | Unless required by applicable law or agreed to in writing, software 199 | distributed under the License is distributed on an "AS IS" BASIS, 200 | WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 201 | See the License for the specific language governing permissions and 202 | limitations under the License. 203 | -------------------------------------------------------------------------------- /complete/mvnw: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | # ---------------------------------------------------------------------------- 3 | # Licensed to the Apache Software Foundation (ASF) under one 4 | # or more contributor license agreements. See the NOTICE file 5 | # distributed with this work for additional information 6 | # regarding copyright ownership. The ASF licenses this file 7 | # to you under the Apache License, Version 2.0 (the 8 | # "License"); you may not use this file except in compliance 9 | # with the License. You may obtain a copy of the License at 10 | # 11 | # http://www.apache.org/licenses/LICENSE-2.0 12 | # 13 | # Unless required by applicable law or agreed to in writing, 14 | # software distributed under the License is distributed on an 15 | # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 | # KIND, either express or implied. See the License for the 17 | # specific language governing permissions and limitations 18 | # under the License. 19 | # ---------------------------------------------------------------------------- 20 | 21 | # ---------------------------------------------------------------------------- 22 | # Apache Maven Wrapper startup batch script, version 3.3.4 23 | # 24 | # Optional ENV vars 25 | # ----------------- 26 | # JAVA_HOME - location of a JDK home dir, required when download maven via java source 27 | # MVNW_REPOURL - repo url base for downloading maven distribution 28 | # MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven 29 | # MVNW_VERBOSE - true: enable verbose log; debug: trace the mvnw script; others: silence the output 30 | # ---------------------------------------------------------------------------- 31 | 32 | set -euf 33 | [ "${MVNW_VERBOSE-}" != debug ] || set -x 34 | 35 | # OS specific support. 36 | native_path() { printf %s\\n "$1"; } 37 | case "$(uname)" in 38 | CYGWIN* | MINGW*) 39 | [ -z "${JAVA_HOME-}" ] || JAVA_HOME="$(cygpath --unix "$JAVA_HOME")" 40 | native_path() { cygpath --path --windows "$1"; } 41 | ;; 42 | esac 43 | 44 | # set JAVACMD and JAVACCMD 45 | set_java_home() { 46 | # For Cygwin and MinGW, ensure paths are in Unix format before anything is touched 47 | if [ -n "${JAVA_HOME-}" ]; then 48 | if [ -x "$JAVA_HOME/jre/sh/java" ]; then 49 | # IBM's JDK on AIX uses strange locations for the executables 50 | JAVACMD="$JAVA_HOME/jre/sh/java" 51 | JAVACCMD="$JAVA_HOME/jre/sh/javac" 52 | else 53 | JAVACMD="$JAVA_HOME/bin/java" 54 | JAVACCMD="$JAVA_HOME/bin/javac" 55 | 56 | if [ ! -x "$JAVACMD" ] || [ ! -x "$JAVACCMD" ]; then 57 | echo "The JAVA_HOME environment variable is not defined correctly, so mvnw cannot run." >&2 58 | echo "JAVA_HOME is set to \"$JAVA_HOME\", but \"\$JAVA_HOME/bin/java\" or \"\$JAVA_HOME/bin/javac\" does not exist." >&2 59 | return 1 60 | fi 61 | fi 62 | else 63 | JAVACMD="$( 64 | 'set' +e 65 | 'unset' -f command 2>/dev/null 66 | 'command' -v java 67 | )" || : 68 | JAVACCMD="$( 69 | 'set' +e 70 | 'unset' -f command 2>/dev/null 71 | 'command' -v javac 72 | )" || : 73 | 74 | if [ ! -x "${JAVACMD-}" ] || [ ! -x "${JAVACCMD-}" ]; then 75 | echo "The java/javac command does not exist in PATH nor is JAVA_HOME set, so mvnw cannot run." >&2 76 | return 1 77 | fi 78 | fi 79 | } 80 | 81 | # hash string like Java String::hashCode 82 | hash_string() { 83 | str="${1:-}" h=0 84 | while [ -n "$str" ]; do 85 | char="${str%"${str#?}"}" 86 | h=$(((h * 31 + $(LC_CTYPE=C printf %d "'$char")) % 4294967296)) 87 | str="${str#?}" 88 | done 89 | printf %x\\n $h 90 | } 91 | 92 | verbose() { :; } 93 | [ "${MVNW_VERBOSE-}" != true ] || verbose() { printf %s\\n "${1-}"; } 94 | 95 | die() { 96 | printf %s\\n "$1" >&2 97 | exit 1 98 | } 99 | 100 | trim() { 101 | # MWRAPPER-139: 102 | # Trims trailing and leading whitespace, carriage returns, tabs, and linefeeds. 103 | # Needed for removing poorly interpreted newline sequences when running in more 104 | # exotic environments such as mingw bash on Windows. 105 | printf "%s" "${1}" | tr -d '[:space:]' 106 | } 107 | 108 | scriptDir="$(dirname "$0")" 109 | scriptName="$(basename "$0")" 110 | 111 | # parse distributionUrl and optional distributionSha256Sum, requires .mvn/wrapper/maven-wrapper.properties 112 | while IFS="=" read -r key value; do 113 | case "${key-}" in 114 | distributionUrl) distributionUrl=$(trim "${value-}") ;; 115 | distributionSha256Sum) distributionSha256Sum=$(trim "${value-}") ;; 116 | esac 117 | done <"$scriptDir/.mvn/wrapper/maven-wrapper.properties" 118 | [ -n "${distributionUrl-}" ] || die "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties" 119 | 120 | case "${distributionUrl##*/}" in 121 | maven-mvnd-*bin.*) 122 | MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ 123 | case "${PROCESSOR_ARCHITECTURE-}${PROCESSOR_ARCHITEW6432-}:$(uname -a)" in 124 | *AMD64:CYGWIN* | *AMD64:MINGW*) distributionPlatform=windows-amd64 ;; 125 | :Darwin*x86_64) distributionPlatform=darwin-amd64 ;; 126 | :Darwin*arm64) distributionPlatform=darwin-aarch64 ;; 127 | :Linux*x86_64*) distributionPlatform=linux-amd64 ;; 128 | *) 129 | echo "Cannot detect native platform for mvnd on $(uname)-$(uname -m), use pure java version" >&2 130 | distributionPlatform=linux-amd64 131 | ;; 132 | esac 133 | distributionUrl="${distributionUrl%-bin.*}-$distributionPlatform.zip" 134 | ;; 135 | maven-mvnd-*) MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ ;; 136 | *) MVN_CMD="mvn${scriptName#mvnw}" _MVNW_REPO_PATTERN=/org/apache/maven/ ;; 137 | esac 138 | 139 | # apply MVNW_REPOURL and calculate MAVEN_HOME 140 | # maven home pattern: ~/.m2/wrapper/dists/{apache-maven-,maven-mvnd--}/ 141 | [ -z "${MVNW_REPOURL-}" ] || distributionUrl="$MVNW_REPOURL$_MVNW_REPO_PATTERN${distributionUrl#*"$_MVNW_REPO_PATTERN"}" 142 | distributionUrlName="${distributionUrl##*/}" 143 | distributionUrlNameMain="${distributionUrlName%.*}" 144 | distributionUrlNameMain="${distributionUrlNameMain%-bin}" 145 | MAVEN_USER_HOME="${MAVEN_USER_HOME:-${HOME}/.m2}" 146 | MAVEN_HOME="${MAVEN_USER_HOME}/wrapper/dists/${distributionUrlNameMain-}/$(hash_string "$distributionUrl")" 147 | 148 | exec_maven() { 149 | unset MVNW_VERBOSE MVNW_USERNAME MVNW_PASSWORD MVNW_REPOURL || : 150 | exec "$MAVEN_HOME/bin/$MVN_CMD" "$@" || die "cannot exec $MAVEN_HOME/bin/$MVN_CMD" 151 | } 152 | 153 | if [ -d "$MAVEN_HOME" ]; then 154 | verbose "found existing MAVEN_HOME at $MAVEN_HOME" 155 | exec_maven "$@" 156 | fi 157 | 158 | case "${distributionUrl-}" in 159 | *?-bin.zip | *?maven-mvnd-?*-?*.zip) ;; 160 | *) die "distributionUrl is not valid, must match *-bin.zip or maven-mvnd-*.zip, but found '${distributionUrl-}'" ;; 161 | esac 162 | 163 | # prepare tmp dir 164 | if TMP_DOWNLOAD_DIR="$(mktemp -d)" && [ -d "$TMP_DOWNLOAD_DIR" ]; then 165 | clean() { rm -rf -- "$TMP_DOWNLOAD_DIR"; } 166 | trap clean HUP INT TERM EXIT 167 | else 168 | die "cannot create temp dir" 169 | fi 170 | 171 | mkdir -p -- "${MAVEN_HOME%/*}" 172 | 173 | # Download and Install Apache Maven 174 | verbose "Couldn't find MAVEN_HOME, downloading and installing it ..." 175 | verbose "Downloading from: $distributionUrl" 176 | verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName" 177 | 178 | # select .zip or .tar.gz 179 | if ! command -v unzip >/dev/null; then 180 | distributionUrl="${distributionUrl%.zip}.tar.gz" 181 | distributionUrlName="${distributionUrl##*/}" 182 | fi 183 | 184 | # verbose opt 185 | __MVNW_QUIET_WGET=--quiet __MVNW_QUIET_CURL=--silent __MVNW_QUIET_UNZIP=-q __MVNW_QUIET_TAR='' 186 | [ "${MVNW_VERBOSE-}" != true ] || __MVNW_QUIET_WGET='' __MVNW_QUIET_CURL='' __MVNW_QUIET_UNZIP='' __MVNW_QUIET_TAR=v 187 | 188 | # normalize http auth 189 | case "${MVNW_PASSWORD:+has-password}" in 190 | '') MVNW_USERNAME='' MVNW_PASSWORD='' ;; 191 | has-password) [ -n "${MVNW_USERNAME-}" ] || MVNW_USERNAME='' MVNW_PASSWORD='' ;; 192 | esac 193 | 194 | if [ -z "${MVNW_USERNAME-}" ] && command -v wget >/dev/null; then 195 | verbose "Found wget ... using wget" 196 | wget ${__MVNW_QUIET_WGET:+"$__MVNW_QUIET_WGET"} "$distributionUrl" -O "$TMP_DOWNLOAD_DIR/$distributionUrlName" || die "wget: Failed to fetch $distributionUrl" 197 | elif [ -z "${MVNW_USERNAME-}" ] && command -v curl >/dev/null; then 198 | verbose "Found curl ... using curl" 199 | curl ${__MVNW_QUIET_CURL:+"$__MVNW_QUIET_CURL"} -f -L -o "$TMP_DOWNLOAD_DIR/$distributionUrlName" "$distributionUrl" || die "curl: Failed to fetch $distributionUrl" 200 | elif set_java_home; then 201 | verbose "Falling back to use Java to download" 202 | javaSource="$TMP_DOWNLOAD_DIR/Downloader.java" 203 | targetZip="$TMP_DOWNLOAD_DIR/$distributionUrlName" 204 | cat >"$javaSource" <<-END 205 | public class Downloader extends java.net.Authenticator 206 | { 207 | protected java.net.PasswordAuthentication getPasswordAuthentication() 208 | { 209 | return new java.net.PasswordAuthentication( System.getenv( "MVNW_USERNAME" ), System.getenv( "MVNW_PASSWORD" ).toCharArray() ); 210 | } 211 | public static void main( String[] args ) throws Exception 212 | { 213 | setDefault( new Downloader() ); 214 | java.nio.file.Files.copy( java.net.URI.create( args[0] ).toURL().openStream(), java.nio.file.Paths.get( args[1] ).toAbsolutePath().normalize() ); 215 | } 216 | } 217 | END 218 | # For Cygwin/MinGW, switch paths to Windows format before running javac and java 219 | verbose " - Compiling Downloader.java ..." 220 | "$(native_path "$JAVACCMD")" "$(native_path "$javaSource")" || die "Failed to compile Downloader.java" 221 | verbose " - Running Downloader.java ..." 222 | "$(native_path "$JAVACMD")" -cp "$(native_path "$TMP_DOWNLOAD_DIR")" Downloader "$distributionUrl" "$(native_path "$targetZip")" 223 | fi 224 | 225 | # If specified, validate the SHA-256 sum of the Maven distribution zip file 226 | if [ -n "${distributionSha256Sum-}" ]; then 227 | distributionSha256Result=false 228 | if [ "$MVN_CMD" = mvnd.sh ]; then 229 | echo "Checksum validation is not supported for maven-mvnd." >&2 230 | echo "Please disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2 231 | exit 1 232 | elif command -v sha256sum >/dev/null; then 233 | if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" | sha256sum -c - >/dev/null 2>&1; then 234 | distributionSha256Result=true 235 | fi 236 | elif command -v shasum >/dev/null; then 237 | if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" | shasum -a 256 -c >/dev/null 2>&1; then 238 | distributionSha256Result=true 239 | fi 240 | else 241 | echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." >&2 242 | echo "Please install either command, or disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2 243 | exit 1 244 | fi 245 | if [ $distributionSha256Result = false ]; then 246 | echo "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised." >&2 247 | echo "If you updated your Maven version, you need to update the specified distributionSha256Sum property." >&2 248 | exit 1 249 | fi 250 | fi 251 | 252 | # unzip and move 253 | if command -v unzip >/dev/null; then 254 | unzip ${__MVNW_QUIET_UNZIP:+"$__MVNW_QUIET_UNZIP"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -d "$TMP_DOWNLOAD_DIR" || die "failed to unzip" 255 | else 256 | tar xzf${__MVNW_QUIET_TAR:+"$__MVNW_QUIET_TAR"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -C "$TMP_DOWNLOAD_DIR" || die "failed to untar" 257 | fi 258 | 259 | # Find the actual extracted directory name (handles snapshots where filename != directory name) 260 | actualDistributionDir="" 261 | 262 | # First try the expected directory name (for regular distributions) 263 | if [ -d "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" ]; then 264 | if [ -f "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain/bin/$MVN_CMD" ]; then 265 | actualDistributionDir="$distributionUrlNameMain" 266 | fi 267 | fi 268 | 269 | # If not found, search for any directory with the Maven executable (for snapshots) 270 | if [ -z "$actualDistributionDir" ]; then 271 | # enable globbing to iterate over items 272 | set +f 273 | for dir in "$TMP_DOWNLOAD_DIR"/*; do 274 | if [ -d "$dir" ]; then 275 | if [ -f "$dir/bin/$MVN_CMD" ]; then 276 | actualDistributionDir="$(basename "$dir")" 277 | break 278 | fi 279 | fi 280 | done 281 | set -f 282 | fi 283 | 284 | if [ -z "$actualDistributionDir" ]; then 285 | verbose "Contents of $TMP_DOWNLOAD_DIR:" 286 | verbose "$(ls -la "$TMP_DOWNLOAD_DIR")" 287 | die "Could not find Maven distribution directory in extracted archive" 288 | fi 289 | 290 | verbose "Found extracted Maven distribution directory: $actualDistributionDir" 291 | printf %s\\n "$distributionUrl" >"$TMP_DOWNLOAD_DIR/$actualDistributionDir/mvnw.url" 292 | mv -- "$TMP_DOWNLOAD_DIR/$actualDistributionDir" "$MAVEN_HOME" || [ -d "$MAVEN_HOME" ] || die "fail to move MAVEN_HOME" 293 | 294 | clean || : 295 | exec_maven "$@" 296 | -------------------------------------------------------------------------------- /initial/mvnw: -------------------------------------------------------------------------------- 1 | #!/bin/sh 2 | # ---------------------------------------------------------------------------- 3 | # Licensed to the Apache Software Foundation (ASF) under one 4 | # or more contributor license agreements. See the NOTICE file 5 | # distributed with this work for additional information 6 | # regarding copyright ownership. The ASF licenses this file 7 | # to you under the Apache License, Version 2.0 (the 8 | # "License"); you may not use this file except in compliance 9 | # with the License. You may obtain a copy of the License at 10 | # 11 | # http://www.apache.org/licenses/LICENSE-2.0 12 | # 13 | # Unless required by applicable law or agreed to in writing, 14 | # software distributed under the License is distributed on an 15 | # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 | # KIND, either express or implied. See the License for the 17 | # specific language governing permissions and limitations 18 | # under the License. 19 | # ---------------------------------------------------------------------------- 20 | 21 | # ---------------------------------------------------------------------------- 22 | # Apache Maven Wrapper startup batch script, version 3.3.4 23 | # 24 | # Optional ENV vars 25 | # ----------------- 26 | # JAVA_HOME - location of a JDK home dir, required when download maven via java source 27 | # MVNW_REPOURL - repo url base for downloading maven distribution 28 | # MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven 29 | # MVNW_VERBOSE - true: enable verbose log; debug: trace the mvnw script; others: silence the output 30 | # ---------------------------------------------------------------------------- 31 | 32 | set -euf 33 | [ "${MVNW_VERBOSE-}" != debug ] || set -x 34 | 35 | # OS specific support. 36 | native_path() { printf %s\\n "$1"; } 37 | case "$(uname)" in 38 | CYGWIN* | MINGW*) 39 | [ -z "${JAVA_HOME-}" ] || JAVA_HOME="$(cygpath --unix "$JAVA_HOME")" 40 | native_path() { cygpath --path --windows "$1"; } 41 | ;; 42 | esac 43 | 44 | # set JAVACMD and JAVACCMD 45 | set_java_home() { 46 | # For Cygwin and MinGW, ensure paths are in Unix format before anything is touched 47 | if [ -n "${JAVA_HOME-}" ]; then 48 | if [ -x "$JAVA_HOME/jre/sh/java" ]; then 49 | # IBM's JDK on AIX uses strange locations for the executables 50 | JAVACMD="$JAVA_HOME/jre/sh/java" 51 | JAVACCMD="$JAVA_HOME/jre/sh/javac" 52 | else 53 | JAVACMD="$JAVA_HOME/bin/java" 54 | JAVACCMD="$JAVA_HOME/bin/javac" 55 | 56 | if [ ! -x "$JAVACMD" ] || [ ! -x "$JAVACCMD" ]; then 57 | echo "The JAVA_HOME environment variable is not defined correctly, so mvnw cannot run." >&2 58 | echo "JAVA_HOME is set to \"$JAVA_HOME\", but \"\$JAVA_HOME/bin/java\" or \"\$JAVA_HOME/bin/javac\" does not exist." >&2 59 | return 1 60 | fi 61 | fi 62 | else 63 | JAVACMD="$( 64 | 'set' +e 65 | 'unset' -f command 2>/dev/null 66 | 'command' -v java 67 | )" || : 68 | JAVACCMD="$( 69 | 'set' +e 70 | 'unset' -f command 2>/dev/null 71 | 'command' -v javac 72 | )" || : 73 | 74 | if [ ! -x "${JAVACMD-}" ] || [ ! -x "${JAVACCMD-}" ]; then 75 | echo "The java/javac command does not exist in PATH nor is JAVA_HOME set, so mvnw cannot run." >&2 76 | return 1 77 | fi 78 | fi 79 | } 80 | 81 | # hash string like Java String::hashCode 82 | hash_string() { 83 | str="${1:-}" h=0 84 | while [ -n "$str" ]; do 85 | char="${str%"${str#?}"}" 86 | h=$(((h * 31 + $(LC_CTYPE=C printf %d "'$char")) % 4294967296)) 87 | str="${str#?}" 88 | done 89 | printf %x\\n $h 90 | } 91 | 92 | verbose() { :; } 93 | [ "${MVNW_VERBOSE-}" != true ] || verbose() { printf %s\\n "${1-}"; } 94 | 95 | die() { 96 | printf %s\\n "$1" >&2 97 | exit 1 98 | } 99 | 100 | trim() { 101 | # MWRAPPER-139: 102 | # Trims trailing and leading whitespace, carriage returns, tabs, and linefeeds. 103 | # Needed for removing poorly interpreted newline sequences when running in more 104 | # exotic environments such as mingw bash on Windows. 105 | printf "%s" "${1}" | tr -d '[:space:]' 106 | } 107 | 108 | scriptDir="$(dirname "$0")" 109 | scriptName="$(basename "$0")" 110 | 111 | # parse distributionUrl and optional distributionSha256Sum, requires .mvn/wrapper/maven-wrapper.properties 112 | while IFS="=" read -r key value; do 113 | case "${key-}" in 114 | distributionUrl) distributionUrl=$(trim "${value-}") ;; 115 | distributionSha256Sum) distributionSha256Sum=$(trim "${value-}") ;; 116 | esac 117 | done <"$scriptDir/.mvn/wrapper/maven-wrapper.properties" 118 | [ -n "${distributionUrl-}" ] || die "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties" 119 | 120 | case "${distributionUrl##*/}" in 121 | maven-mvnd-*bin.*) 122 | MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ 123 | case "${PROCESSOR_ARCHITECTURE-}${PROCESSOR_ARCHITEW6432-}:$(uname -a)" in 124 | *AMD64:CYGWIN* | *AMD64:MINGW*) distributionPlatform=windows-amd64 ;; 125 | :Darwin*x86_64) distributionPlatform=darwin-amd64 ;; 126 | :Darwin*arm64) distributionPlatform=darwin-aarch64 ;; 127 | :Linux*x86_64*) distributionPlatform=linux-amd64 ;; 128 | *) 129 | echo "Cannot detect native platform for mvnd on $(uname)-$(uname -m), use pure java version" >&2 130 | distributionPlatform=linux-amd64 131 | ;; 132 | esac 133 | distributionUrl="${distributionUrl%-bin.*}-$distributionPlatform.zip" 134 | ;; 135 | maven-mvnd-*) MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ ;; 136 | *) MVN_CMD="mvn${scriptName#mvnw}" _MVNW_REPO_PATTERN=/org/apache/maven/ ;; 137 | esac 138 | 139 | # apply MVNW_REPOURL and calculate MAVEN_HOME 140 | # maven home pattern: ~/.m2/wrapper/dists/{apache-maven-,maven-mvnd--}/ 141 | [ -z "${MVNW_REPOURL-}" ] || distributionUrl="$MVNW_REPOURL$_MVNW_REPO_PATTERN${distributionUrl#*"$_MVNW_REPO_PATTERN"}" 142 | distributionUrlName="${distributionUrl##*/}" 143 | distributionUrlNameMain="${distributionUrlName%.*}" 144 | distributionUrlNameMain="${distributionUrlNameMain%-bin}" 145 | MAVEN_USER_HOME="${MAVEN_USER_HOME:-${HOME}/.m2}" 146 | MAVEN_HOME="${MAVEN_USER_HOME}/wrapper/dists/${distributionUrlNameMain-}/$(hash_string "$distributionUrl")" 147 | 148 | exec_maven() { 149 | unset MVNW_VERBOSE MVNW_USERNAME MVNW_PASSWORD MVNW_REPOURL || : 150 | exec "$MAVEN_HOME/bin/$MVN_CMD" "$@" || die "cannot exec $MAVEN_HOME/bin/$MVN_CMD" 151 | } 152 | 153 | if [ -d "$MAVEN_HOME" ]; then 154 | verbose "found existing MAVEN_HOME at $MAVEN_HOME" 155 | exec_maven "$@" 156 | fi 157 | 158 | case "${distributionUrl-}" in 159 | *?-bin.zip | *?maven-mvnd-?*-?*.zip) ;; 160 | *) die "distributionUrl is not valid, must match *-bin.zip or maven-mvnd-*.zip, but found '${distributionUrl-}'" ;; 161 | esac 162 | 163 | # prepare tmp dir 164 | if TMP_DOWNLOAD_DIR="$(mktemp -d)" && [ -d "$TMP_DOWNLOAD_DIR" ]; then 165 | clean() { rm -rf -- "$TMP_DOWNLOAD_DIR"; } 166 | trap clean HUP INT TERM EXIT 167 | else 168 | die "cannot create temp dir" 169 | fi 170 | 171 | mkdir -p -- "${MAVEN_HOME%/*}" 172 | 173 | # Download and Install Apache Maven 174 | verbose "Couldn't find MAVEN_HOME, downloading and installing it ..." 175 | verbose "Downloading from: $distributionUrl" 176 | verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName" 177 | 178 | # select .zip or .tar.gz 179 | if ! command -v unzip >/dev/null; then 180 | distributionUrl="${distributionUrl%.zip}.tar.gz" 181 | distributionUrlName="${distributionUrl##*/}" 182 | fi 183 | 184 | # verbose opt 185 | __MVNW_QUIET_WGET=--quiet __MVNW_QUIET_CURL=--silent __MVNW_QUIET_UNZIP=-q __MVNW_QUIET_TAR='' 186 | [ "${MVNW_VERBOSE-}" != true ] || __MVNW_QUIET_WGET='' __MVNW_QUIET_CURL='' __MVNW_QUIET_UNZIP='' __MVNW_QUIET_TAR=v 187 | 188 | # normalize http auth 189 | case "${MVNW_PASSWORD:+has-password}" in 190 | '') MVNW_USERNAME='' MVNW_PASSWORD='' ;; 191 | has-password) [ -n "${MVNW_USERNAME-}" ] || MVNW_USERNAME='' MVNW_PASSWORD='' ;; 192 | esac 193 | 194 | if [ -z "${MVNW_USERNAME-}" ] && command -v wget >/dev/null; then 195 | verbose "Found wget ... using wget" 196 | wget ${__MVNW_QUIET_WGET:+"$__MVNW_QUIET_WGET"} "$distributionUrl" -O "$TMP_DOWNLOAD_DIR/$distributionUrlName" || die "wget: Failed to fetch $distributionUrl" 197 | elif [ -z "${MVNW_USERNAME-}" ] && command -v curl >/dev/null; then 198 | verbose "Found curl ... using curl" 199 | curl ${__MVNW_QUIET_CURL:+"$__MVNW_QUIET_CURL"} -f -L -o "$TMP_DOWNLOAD_DIR/$distributionUrlName" "$distributionUrl" || die "curl: Failed to fetch $distributionUrl" 200 | elif set_java_home; then 201 | verbose "Falling back to use Java to download" 202 | javaSource="$TMP_DOWNLOAD_DIR/Downloader.java" 203 | targetZip="$TMP_DOWNLOAD_DIR/$distributionUrlName" 204 | cat >"$javaSource" <<-END 205 | public class Downloader extends java.net.Authenticator 206 | { 207 | protected java.net.PasswordAuthentication getPasswordAuthentication() 208 | { 209 | return new java.net.PasswordAuthentication( System.getenv( "MVNW_USERNAME" ), System.getenv( "MVNW_PASSWORD" ).toCharArray() ); 210 | } 211 | public static void main( String[] args ) throws Exception 212 | { 213 | setDefault( new Downloader() ); 214 | java.nio.file.Files.copy( java.net.URI.create( args[0] ).toURL().openStream(), java.nio.file.Paths.get( args[1] ).toAbsolutePath().normalize() ); 215 | } 216 | } 217 | END 218 | # For Cygwin/MinGW, switch paths to Windows format before running javac and java 219 | verbose " - Compiling Downloader.java ..." 220 | "$(native_path "$JAVACCMD")" "$(native_path "$javaSource")" || die "Failed to compile Downloader.java" 221 | verbose " - Running Downloader.java ..." 222 | "$(native_path "$JAVACMD")" -cp "$(native_path "$TMP_DOWNLOAD_DIR")" Downloader "$distributionUrl" "$(native_path "$targetZip")" 223 | fi 224 | 225 | # If specified, validate the SHA-256 sum of the Maven distribution zip file 226 | if [ -n "${distributionSha256Sum-}" ]; then 227 | distributionSha256Result=false 228 | if [ "$MVN_CMD" = mvnd.sh ]; then 229 | echo "Checksum validation is not supported for maven-mvnd." >&2 230 | echo "Please disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2 231 | exit 1 232 | elif command -v sha256sum >/dev/null; then 233 | if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" | sha256sum -c - >/dev/null 2>&1; then 234 | distributionSha256Result=true 235 | fi 236 | elif command -v shasum >/dev/null; then 237 | if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" | shasum -a 256 -c >/dev/null 2>&1; then 238 | distributionSha256Result=true 239 | fi 240 | else 241 | echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." >&2 242 | echo "Please install either command, or disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2 243 | exit 1 244 | fi 245 | if [ $distributionSha256Result = false ]; then 246 | echo "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised." >&2 247 | echo "If you updated your Maven version, you need to update the specified distributionSha256Sum property." >&2 248 | exit 1 249 | fi 250 | fi 251 | 252 | # unzip and move 253 | if command -v unzip >/dev/null; then 254 | unzip ${__MVNW_QUIET_UNZIP:+"$__MVNW_QUIET_UNZIP"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -d "$TMP_DOWNLOAD_DIR" || die "failed to unzip" 255 | else 256 | tar xzf${__MVNW_QUIET_TAR:+"$__MVNW_QUIET_TAR"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -C "$TMP_DOWNLOAD_DIR" || die "failed to untar" 257 | fi 258 | 259 | # Find the actual extracted directory name (handles snapshots where filename != directory name) 260 | actualDistributionDir="" 261 | 262 | # First try the expected directory name (for regular distributions) 263 | if [ -d "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" ]; then 264 | if [ -f "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain/bin/$MVN_CMD" ]; then 265 | actualDistributionDir="$distributionUrlNameMain" 266 | fi 267 | fi 268 | 269 | # If not found, search for any directory with the Maven executable (for snapshots) 270 | if [ -z "$actualDistributionDir" ]; then 271 | # enable globbing to iterate over items 272 | set +f 273 | for dir in "$TMP_DOWNLOAD_DIR"/*; do 274 | if [ -d "$dir" ]; then 275 | if [ -f "$dir/bin/$MVN_CMD" ]; then 276 | actualDistributionDir="$(basename "$dir")" 277 | break 278 | fi 279 | fi 280 | done 281 | set -f 282 | fi 283 | 284 | if [ -z "$actualDistributionDir" ]; then 285 | verbose "Contents of $TMP_DOWNLOAD_DIR:" 286 | verbose "$(ls -la "$TMP_DOWNLOAD_DIR")" 287 | die "Could not find Maven distribution directory in extracted archive" 288 | fi 289 | 290 | verbose "Found extracted Maven distribution directory: $actualDistributionDir" 291 | printf %s\\n "$distributionUrl" >"$TMP_DOWNLOAD_DIR/$actualDistributionDir/mvnw.url" 292 | mv -- "$TMP_DOWNLOAD_DIR/$actualDistributionDir" "$MAVEN_HOME" || [ -d "$MAVEN_HOME" ] || die "fail to move MAVEN_HOME" 293 | 294 | clean || : 295 | exec_maven "$@" 296 | --------------------------------------------------------------------------------