├── .gitignore ├── LICENSE ├── README.md ├── config ├── nginx │ ├── fastcgi.conf │ ├── fastcgi_params │ ├── http.d │ │ ├── default.conf │ │ └── php.conf │ ├── mime.types │ ├── nginx.conf │ ├── scgi_params │ └── uwsgi_params └── php81 │ ├── conf.d │ ├── 00_curl.ini │ ├── 00_dom.ini │ ├── 00_gd.ini │ ├── 00_iconv.ini │ ├── 00_mbstring.ini │ ├── 00_openssl.ini │ ├── 00_pdo.ini │ ├── 00_zip.ini │ ├── 01_mysqlnd.ini │ ├── 01_xmlreader.ini │ ├── 02_mysqli.ini │ └── 02_pdo_mysql.ini │ ├── php-fpm.conf │ ├── php-fpm.d │ └── www.conf │ └── php.ini ├── docker-compose.yml ├── docker ├── apply-config.sh ├── build.sh ├── init.sh ├── nginx │ ├── Dockerfile │ ├── build.sh │ ├── ssh.sh │ └── start.sh └── up.sh └── www └── index.php /.gitignore: -------------------------------------------------------------------------------- 1 | # Logs 2 | logs 3 | *.log 4 | 5 | # Runtime data 6 | pids 7 | *.pid 8 | *.seed 9 | *.pid.lock 10 | 11 | # Output of 'npm pack' 12 | *.tgz 13 | *.tar.gz 14 | 15 | # Jetbrains IDE 16 | .idea 17 | .DS_Store 18 | .vscode 19 | -------------------------------------------------------------------------------- /LICENSE: -------------------------------------------------------------------------------- 1 | MIT License 2 | 3 | Copyright (c) 2022 Wesley Milan 4 | 5 | Permission is hereby granted, free of charge, to any person obtaining a copy 6 | of this software and associated documentation files (the "Software"), to deal 7 | in the Software without restriction, including without limitation the rights 8 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 9 | copies of the Software, and to permit persons to whom the Software is 10 | furnished to do so, subject to the following conditions: 11 | 12 | The above copyright notice and this permission notice shall be included in all 13 | copies or substantial portions of the Software. 14 | 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 18 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 19 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 20 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 21 | SOFTWARE. 22 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # nginx-for-php 2 | A Nginx config repository for PHP backed web server 3 | 4 | Full **portuguese** tutorial is here: [https://youtu.be/1Dt3ey-KnTk](https://youtu.be/1Dt3ey-KnTk) 5 | 6 | # 1st Step: Domain name 7 | In your local host machine add the following lines to your `/etc/hosts` file in order to find the application. 8 | ``` 9 | 127.0.0.1 www.php.dvp 10 | ``` 11 | 12 | # 2nd Step: Preparing the environment 13 | Build your custom Docker Image running `./docker/build.sh` 14 | 15 | # 3rd Step: Running Docker 16 | `docker-compose up`: Standalone version 17 | `docker-compose up -d`: Daemon version 18 | 19 | # 4th Step: Check your browser 20 | Open http://www.php.dvp/ and check the headers on your devtools, and you should see this entry `Server: nginx`. 21 | 22 | # Studying how it works 23 | The most important scripts are: 24 | - `docker/nginx/Dockerfile`: that compiles the Docker Image. Here you can find the packages installed on Linux to make 25 | this experiment work. 26 | - `docker/nginx/start.sh`: This is the startup script what is executed when the container is activated. 27 | - `docker/apply-config.sh`: Just a shortcut to apply your changes on NGinx config files. You should run this shell script 28 | from inside your container. 29 | - `docker/nginx/ssh.sh`: Easy way to into your container instance using SSH. This allows you to execute tests and apply 30 | your configuration experiments. 31 | - `pm2/pm2-development.json`: PM2 profile file. This files contains the information needed by PM2 to run your API as a 32 | service and keep it running in case of crash. 33 | - `config/nginx`: Where all NGinx config files resides and can be edited as your will. 34 | - `config/php8`: Where all PHP FPM config files resides and can be edited as your will. 35 | 36 | # Contact 37 | 38 | For more tutorials and content about applications, Cloud Computing, Security and performance please follow me on my 39 | channels/social media: 40 | 41 | YouTube: 42 | - Um Inventor Qualquer (Português): https://www.youtube.com/c/UmInventorQualquer 43 | - Wesley Milan (Português): https://www.youtube.com/c/WesleyMilan 44 | - Wesley Milan (English): https://www.youtube.com/channel/UCAyRxlnOwFi76XWKpT6k08g 45 | 46 | Social: 47 | - Linked-In: https://www.linkedin.com/in/wesleymilan/ 48 | - Instagram (Português): https://www.instagram.com/uminventorqualquer/ 49 | -------------------------------------------------------------------------------- /config/nginx/fastcgi.conf: -------------------------------------------------------------------------------- 1 | 2 | fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; 3 | fastcgi_param QUERY_STRING $query_string; 4 | fastcgi_param REQUEST_METHOD $request_method; 5 | fastcgi_param CONTENT_TYPE $content_type; 6 | fastcgi_param CONTENT_LENGTH $content_length; 7 | 8 | fastcgi_param SCRIPT_NAME $fastcgi_script_name; 9 | fastcgi_param REQUEST_URI $request_uri; 10 | fastcgi_param DOCUMENT_URI $document_uri; 11 | fastcgi_param DOCUMENT_ROOT $document_root; 12 | fastcgi_param SERVER_PROTOCOL $server_protocol; 13 | fastcgi_param REQUEST_SCHEME $scheme; 14 | fastcgi_param HTTPS $https if_not_empty; 15 | 16 | fastcgi_param GATEWAY_INTERFACE CGI/1.1; 17 | fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; 18 | 19 | fastcgi_param REMOTE_ADDR $remote_addr; 20 | fastcgi_param REMOTE_PORT $remote_port; 21 | fastcgi_param SERVER_ADDR $server_addr; 22 | fastcgi_param SERVER_PORT $server_port; 23 | fastcgi_param SERVER_NAME $server_name; 24 | 25 | # PHP only, required if PHP was built with --enable-force-cgi-redirect 26 | fastcgi_param REDIRECT_STATUS 200; 27 | -------------------------------------------------------------------------------- /config/nginx/fastcgi_params: -------------------------------------------------------------------------------- 1 | 2 | fastcgi_param QUERY_STRING $query_string; 3 | fastcgi_param REQUEST_METHOD $request_method; 4 | fastcgi_param CONTENT_TYPE $content_type; 5 | fastcgi_param CONTENT_LENGTH $content_length; 6 | 7 | fastcgi_param SCRIPT_NAME $fastcgi_script_name; 8 | fastcgi_param REQUEST_URI $request_uri; 9 | fastcgi_param DOCUMENT_URI $document_uri; 10 | fastcgi_param DOCUMENT_ROOT $document_root; 11 | fastcgi_param SERVER_PROTOCOL $server_protocol; 12 | fastcgi_param REQUEST_SCHEME $scheme; 13 | fastcgi_param HTTPS $https if_not_empty; 14 | 15 | fastcgi_param GATEWAY_INTERFACE CGI/1.1; 16 | fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; 17 | 18 | fastcgi_param REMOTE_ADDR $remote_addr; 19 | fastcgi_param REMOTE_PORT $remote_port; 20 | fastcgi_param SERVER_ADDR $server_addr; 21 | fastcgi_param SERVER_PORT $server_port; 22 | fastcgi_param SERVER_NAME $server_name; 23 | 24 | # PHP only, required if PHP was built with --enable-force-cgi-redirect 25 | fastcgi_param REDIRECT_STATUS 200; 26 | -------------------------------------------------------------------------------- /config/nginx/http.d/default.conf: -------------------------------------------------------------------------------- 1 | # This is a default site configuration which will simply return 404, preventing 2 | # chance access to any other virtualhost. 3 | 4 | server { 5 | listen 80 default_server; 6 | listen [::]:80 default_server; 7 | 8 | # Everything is a 404 9 | location / { 10 | return 404; 11 | } 12 | 13 | # You may need this to prevent return 404 recursion. 14 | location = /404.html { 15 | internal; 16 | } 17 | } 18 | -------------------------------------------------------------------------------- /config/nginx/http.d/php.conf: -------------------------------------------------------------------------------- 1 | # This is a default site configuration which will simply return 404, preventing 2 | # chance access to any other virtualhost. 3 | 4 | server { 5 | server_name www.php.dvp; 6 | 7 | listen 80; 8 | listen [::]:80; 9 | 10 | root /app/www/; 11 | index index.php index.html index.htm; 12 | 13 | location ~ /\. { 14 | log_not_found off; 15 | deny all; 16 | } 17 | 18 | location / { 19 | try_files $uri $uri/ /index.php?$query_string; 20 | } 21 | 22 | # Pass the PHP scripts to FastCGI server listening on socket 23 | location ~ \.php$ { 24 | fastcgi_split_path_info ^(.+?\.php)(/.*)$; 25 | if (!-f $document_root$fastcgi_script_name) { 26 | return 404; 27 | } 28 | 29 | # Mitigate https://httpoxy.org/ vulnerabilities 30 | fastcgi_param HTTP_PROXY ""; 31 | 32 | # fastcgi_pass unix:/run/php-fpm8/php-fpm.sock; 33 | fastcgi_pass 127.0.0.1:9000; 34 | 35 | fastcgi_index index.php; 36 | 37 | include fastcgi_params; 38 | 39 | fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; 40 | fastcgi_param PATH_INFO $fastcgi_path_info; 41 | } 42 | } 43 | -------------------------------------------------------------------------------- /config/nginx/mime.types: -------------------------------------------------------------------------------- 1 | 2 | types { 3 | text/html html htm shtml; 4 | text/css css; 5 | text/xml xml; 6 | image/gif gif; 7 | image/jpeg jpeg jpg; 8 | application/javascript js; 9 | application/atom+xml atom; 10 | application/rss+xml rss; 11 | 12 | text/mathml mml; 13 | text/plain txt; 14 | text/vnd.sun.j2me.app-descriptor jad; 15 | text/vnd.wap.wml wml; 16 | text/x-component htc; 17 | 18 | image/avif avif; 19 | image/png png; 20 | image/svg+xml svg svgz; 21 | image/tiff tif tiff; 22 | image/vnd.wap.wbmp wbmp; 23 | image/webp webp; 24 | image/x-icon ico; 25 | image/x-jng jng; 26 | image/x-ms-bmp bmp; 27 | 28 | font/woff woff; 29 | font/woff2 woff2; 30 | 31 | application/java-archive jar war ear; 32 | application/json json; 33 | application/mac-binhex40 hqx; 34 | application/msword doc; 35 | application/pdf pdf; 36 | application/postscript ps eps ai; 37 | application/rtf rtf; 38 | application/vnd.apple.mpegurl m3u8; 39 | application/vnd.google-earth.kml+xml kml; 40 | application/vnd.google-earth.kmz kmz; 41 | application/vnd.ms-excel xls; 42 | application/vnd.ms-fontobject eot; 43 | application/vnd.ms-powerpoint ppt; 44 | application/vnd.oasis.opendocument.graphics odg; 45 | application/vnd.oasis.opendocument.presentation odp; 46 | application/vnd.oasis.opendocument.spreadsheet ods; 47 | application/vnd.oasis.opendocument.text odt; 48 | application/vnd.openxmlformats-officedocument.presentationml.presentation 49 | pptx; 50 | application/vnd.openxmlformats-officedocument.spreadsheetml.sheet 51 | xlsx; 52 | application/vnd.openxmlformats-officedocument.wordprocessingml.document 53 | docx; 54 | application/vnd.wap.wmlc wmlc; 55 | application/wasm wasm; 56 | application/x-7z-compressed 7z; 57 | application/x-cocoa cco; 58 | application/x-java-archive-diff jardiff; 59 | application/x-java-jnlp-file jnlp; 60 | application/x-makeself run; 61 | application/x-perl pl pm; 62 | application/x-pilot prc pdb; 63 | application/x-rar-compressed rar; 64 | application/x-redhat-package-manager rpm; 65 | application/x-sea sea; 66 | application/x-shockwave-flash swf; 67 | application/x-stuffit sit; 68 | application/x-tcl tcl tk; 69 | application/x-x509-ca-cert der pem crt; 70 | application/x-xpinstall xpi; 71 | application/xhtml+xml xhtml; 72 | application/xspf+xml xspf; 73 | application/zip zip; 74 | 75 | application/octet-stream bin exe dll; 76 | application/octet-stream deb; 77 | application/octet-stream dmg; 78 | application/octet-stream iso img; 79 | application/octet-stream msi msp msm; 80 | 81 | audio/midi mid midi kar; 82 | audio/mpeg mp3; 83 | audio/ogg ogg; 84 | audio/x-m4a m4a; 85 | audio/x-realaudio ra; 86 | 87 | video/3gpp 3gpp 3gp; 88 | video/mp2t ts; 89 | video/mp4 mp4; 90 | video/mpeg mpeg mpg; 91 | video/quicktime mov; 92 | video/webm webm; 93 | video/x-flv flv; 94 | video/x-m4v m4v; 95 | video/x-mng mng; 96 | video/x-ms-asf asx asf; 97 | video/x-ms-wmv wmv; 98 | video/x-msvideo avi; 99 | } 100 | -------------------------------------------------------------------------------- /config/nginx/nginx.conf: -------------------------------------------------------------------------------- 1 | # /etc/nginx/nginx.conf 2 | 3 | user nginx; 4 | 5 | # Set number of worker processes automatically based on number of CPU cores. 6 | worker_processes auto; 7 | 8 | # Enables the use of JIT for regular expressions to speed-up their processing. 9 | pcre_jit on; 10 | 11 | # Configures default error logger. 12 | error_log /var/log/nginx/error.log warn; 13 | 14 | # Includes files with directives to load dynamic modules. 15 | include /etc/nginx/modules/*.conf; 16 | 17 | # Uncomment to include files with config snippets into the root context. 18 | # NOTE: This will be enabled by default in Alpine 3.15. 19 | #include /etc/nginx/conf.d/*.conf; 20 | 21 | events { 22 | # The maximum number of simultaneous connections that can be opened by 23 | # a worker process. 24 | worker_connections 1024; 25 | } 26 | 27 | http { 28 | # Includes mapping of file name extensions to MIME types of responses 29 | # and defines the default type. 30 | include /etc/nginx/mime.types; 31 | default_type application/octet-stream; 32 | 33 | # Name servers used to resolve names of upstream servers into addresses. 34 | # It's also needed when using tcpsocket and udpsocket in Lua modules. 35 | #resolver 1.1.1.1 1.0.0.1 2606:4700:4700::1111 2606:4700:4700::1001; 36 | 37 | # Don't tell nginx version to the clients. Default is 'on'. 38 | server_tokens off; 39 | 40 | # Specifies the maximum accepted body size of a client request, as 41 | # indicated by the request header Content-Length. If the stated content 42 | # length is greater than this size, then the client receives the HTTP 43 | # error code 413. Set to 0 to disable. Default is '1m'. 44 | client_max_body_size 1m; 45 | 46 | # Sendfile copies data between one FD and other from within the kernel, 47 | # which is more efficient than read() + write(). Default is off. 48 | sendfile off; 49 | 50 | # Causes nginx to attempt to send its HTTP response head in one packet, 51 | # instead of using partial frames. Default is 'off'. 52 | tcp_nopush on; 53 | 54 | 55 | # Enables the specified protocols. Default is TLSv1 TLSv1.1 TLSv1.2. 56 | # TIP: If you're not obligated to support ancient clients, remove TLSv1.1. 57 | ssl_protocols TLSv1.1 TLSv1.2 TLSv1.3; 58 | 59 | # Path of the file with Diffie-Hellman parameters for EDH ciphers. 60 | # TIP: Generate with: `openssl dhparam -out /etc/ssl/nginx/dh2048.pem 2048` 61 | #ssl_dhparam /etc/ssl/nginx/dh2048.pem; 62 | 63 | # Specifies that our cipher suits should be preferred over client ciphers. 64 | # Default is 'off'. 65 | ssl_prefer_server_ciphers on; 66 | 67 | # Enables a shared SSL cache with size that can hold around 8000 sessions. 68 | # Default is 'none'. 69 | ssl_session_cache shared:SSL:2m; 70 | 71 | # Specifies a time during which a client may reuse the session parameters. 72 | # Default is '5m'. 73 | ssl_session_timeout 1h; 74 | 75 | # Disable TLS session tickets (they are insecure). Default is 'on'. 76 | ssl_session_tickets off; 77 | 78 | 79 | # Enable gzipping of responses. 80 | #gzip on; 81 | 82 | # Set the Vary HTTP header as defined in the RFC 2616. Default is 'off'. 83 | gzip_vary on; 84 | 85 | 86 | # Helper variable for proxying websockets. 87 | map $http_upgrade $connection_upgrade { 88 | default upgrade; 89 | '' close; 90 | } 91 | 92 | 93 | # Specifies the main log format. 94 | log_format main '$remote_addr - $remote_user [$time_local] "$request" ' 95 | '$status $body_bytes_sent "$http_referer" ' 96 | '"$http_user_agent" "$http_x_forwarded_for"'; 97 | 98 | # Sets the path, format, and configuration for a buffered log write. 99 | access_log /var/log/nginx/access.log main; 100 | 101 | 102 | # Includes virtual hosts configs. 103 | include /etc/nginx/http.d/*.conf; 104 | } 105 | 106 | # TIP: Uncomment if you use stream module. 107 | #include /etc/nginx/stream.conf; 108 | -------------------------------------------------------------------------------- /config/nginx/scgi_params: -------------------------------------------------------------------------------- 1 | 2 | scgi_param REQUEST_METHOD $request_method; 3 | scgi_param REQUEST_URI $request_uri; 4 | scgi_param QUERY_STRING $query_string; 5 | scgi_param CONTENT_TYPE $content_type; 6 | 7 | scgi_param DOCUMENT_URI $document_uri; 8 | scgi_param DOCUMENT_ROOT $document_root; 9 | scgi_param SCGI 1; 10 | scgi_param SERVER_PROTOCOL $server_protocol; 11 | scgi_param REQUEST_SCHEME $scheme; 12 | scgi_param HTTPS $https if_not_empty; 13 | 14 | scgi_param REMOTE_ADDR $remote_addr; 15 | scgi_param REMOTE_PORT $remote_port; 16 | scgi_param SERVER_PORT $server_port; 17 | scgi_param SERVER_NAME $server_name; 18 | -------------------------------------------------------------------------------- /config/nginx/uwsgi_params: -------------------------------------------------------------------------------- 1 | 2 | uwsgi_param QUERY_STRING $query_string; 3 | uwsgi_param REQUEST_METHOD $request_method; 4 | uwsgi_param CONTENT_TYPE $content_type; 5 | uwsgi_param CONTENT_LENGTH $content_length; 6 | 7 | uwsgi_param REQUEST_URI $request_uri; 8 | uwsgi_param PATH_INFO $document_uri; 9 | uwsgi_param DOCUMENT_ROOT $document_root; 10 | uwsgi_param SERVER_PROTOCOL $server_protocol; 11 | uwsgi_param REQUEST_SCHEME $scheme; 12 | uwsgi_param HTTPS $https if_not_empty; 13 | 14 | uwsgi_param REMOTE_ADDR $remote_addr; 15 | uwsgi_param REMOTE_PORT $remote_port; 16 | uwsgi_param SERVER_PORT $server_port; 17 | uwsgi_param SERVER_NAME $server_name; 18 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_curl.ini: -------------------------------------------------------------------------------- 1 | extension=curl 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_dom.ini: -------------------------------------------------------------------------------- 1 | extension=dom 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_gd.ini: -------------------------------------------------------------------------------- 1 | extension=gd 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_iconv.ini: -------------------------------------------------------------------------------- 1 | extension=iconv 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_mbstring.ini: -------------------------------------------------------------------------------- 1 | extension=mbstring 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_openssl.ini: -------------------------------------------------------------------------------- 1 | extension=openssl 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_pdo.ini: -------------------------------------------------------------------------------- 1 | extension=pdo 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/00_zip.ini: -------------------------------------------------------------------------------- 1 | extension=zip 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/01_mysqlnd.ini: -------------------------------------------------------------------------------- 1 | extension=mysqlnd 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/01_xmlreader.ini: -------------------------------------------------------------------------------- 1 | extension=xmlreader 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/02_mysqli.ini: -------------------------------------------------------------------------------- 1 | extension=mysqli 2 | -------------------------------------------------------------------------------- /config/php81/conf.d/02_pdo_mysql.ini: -------------------------------------------------------------------------------- 1 | extension=pdo_mysql 2 | -------------------------------------------------------------------------------- /config/php81/php-fpm.conf: -------------------------------------------------------------------------------- 1 | ;;;;;;;;;;;;;;;;;;;;; 2 | ; FPM Configuration ; 3 | ;;;;;;;;;;;;;;;;;;;;; 4 | 5 | ; All relative paths in this configuration file are relative to PHP's install 6 | ; prefix (/usr). This prefix can be dynamically changed by using the 7 | ; '-p' argument from the command line. 8 | 9 | ;;;;;;;;;;;;;;;;;; 10 | ; Global Options ; 11 | ;;;;;;;;;;;;;;;;;; 12 | 13 | [global] 14 | ; Pid file 15 | ; Note: the default prefix is /var 16 | ; Default Value: none 17 | ;pid = run/php-fpm81.pid 18 | 19 | ; Error log file 20 | ; If it's set to "syslog", log is sent to syslogd instead of being written 21 | ; into a local file. 22 | ; Note: the default prefix is /var 23 | ; Default Value: log/php81/error.log 24 | ;error_log = log/php81/error.log 25 | 26 | ; syslog_facility is used to specify what type of program is logging the 27 | ; message. This lets syslogd specify that messages from different facilities 28 | ; will be handled differently. 29 | ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON) 30 | ; Default Value: daemon 31 | ;syslog.facility = daemon 32 | 33 | ; syslog_ident is prepended to every message. If you have multiple FPM 34 | ; instances running on the same server, you can change the default value 35 | ; which must suit common needs. 36 | ; Default Value: php-fpm81 37 | ;syslog.ident = php-fpm81 38 | 39 | ; Log level 40 | ; Possible Values: alert, error, warning, notice, debug 41 | ; Default Value: notice 42 | ;log_level = notice 43 | 44 | ; Log limit on number of characters in the single line (log entry). If the 45 | ; line is over the limit, it is wrapped on multiple lines. The limit is for 46 | ; all logged characters including message prefix and suffix if present. However 47 | ; the new line character does not count into it as it is present only when 48 | ; logging to a file descriptor. It means the new line character is not present 49 | ; when logging to syslog. 50 | ; Default Value: 1024 51 | ;log_limit = 4096 52 | 53 | ; Log buffering specifies if the log line is buffered which means that the 54 | ; line is written in a single write operation. If the value is false, then the 55 | ; data is written directly into the file descriptor. It is an experimental 56 | ; option that can potentially improve logging performance and memory usage 57 | ; for some heavy logging scenarios. This option is ignored if logging to syslog 58 | ; as it has to be always buffered. 59 | ; Default value: yes 60 | ;log_buffering = no 61 | 62 | ; If this number of child processes exit with SIGSEGV or SIGBUS within the time 63 | ; interval set by emergency_restart_interval then FPM will restart. A value 64 | ; of '0' means 'Off'. 65 | ; Default Value: 0 66 | ;emergency_restart_threshold = 0 67 | 68 | ; Interval of time used by emergency_restart_interval to determine when 69 | ; a graceful restart will be initiated. This can be useful to work around 70 | ; accidental corruptions in an accelerator's shared memory. 71 | ; Available Units: s(econds), m(inutes), h(ours), or d(ays) 72 | ; Default Unit: seconds 73 | ; Default Value: 0 74 | ;emergency_restart_interval = 0 75 | 76 | ; Time limit for child processes to wait for a reaction on signals from master. 77 | ; Available units: s(econds), m(inutes), h(ours), or d(ays) 78 | ; Default Unit: seconds 79 | ; Default Value: 0 80 | ;process_control_timeout = 0 81 | 82 | ; The maximum number of processes FPM will fork. This has been designed to control 83 | ; the global number of processes when using dynamic PM within a lot of pools. 84 | ; Use it with caution. 85 | ; Note: A value of 0 indicates no limit 86 | ; Default Value: 0 87 | ; process.max = 128 88 | 89 | ; Specify the nice(2) priority to apply to the master process (only if set) 90 | ; The value can vary from -19 (highest priority) to 20 (lowest priority) 91 | ; Note: - It will only work if the FPM master process is launched as root 92 | ; - The pool process will inherit the master process priority 93 | ; unless specified otherwise 94 | ; Default Value: no set 95 | ; process.priority = -19 96 | 97 | ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. 98 | ; Default Value: yes 99 | ;daemonize = yes 100 | 101 | ; Set open file descriptor rlimit for the master process. 102 | ; Default Value: system defined value 103 | ;rlimit_files = 1024 104 | 105 | ; Set max core size rlimit for the master process. 106 | ; Possible Values: 'unlimited' or an integer greater or equal to 0 107 | ; Default Value: system defined value 108 | ;rlimit_core = 0 109 | 110 | ; Specify the event mechanism FPM will use. The following is available: 111 | ; - select (any POSIX os) 112 | ; - poll (any POSIX os) 113 | ; - epoll (linux >= 2.5.44) 114 | ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0) 115 | ; - /dev/poll (Solaris >= 7) 116 | ; - port (Solaris >= 10) 117 | ; Default Value: not set (auto detection) 118 | ;events.mechanism = epoll 119 | 120 | ; When FPM is built with systemd integration, specify the interval, 121 | ; in seconds, between health report notification to systemd. 122 | ; Set to 0 to disable. 123 | ; Available Units: s(econds), m(inutes), h(ours) 124 | ; Default Unit: seconds 125 | ; Default value: 10 126 | ;systemd_interval = 10 127 | 128 | ;;;;;;;;;;;;;;;;;;;; 129 | ; Pool Definitions ; 130 | ;;;;;;;;;;;;;;;;;;;; 131 | 132 | ; Multiple pools of child processes may be started with different listening 133 | ; ports and different management options. The name of the pool will be 134 | ; used in logs and stats. There is no limitation on the number of pools which 135 | ; FPM can handle. Your system will tell you anyway :) 136 | 137 | ; Include one or more files. If glob(3) exists, it is used to include a bunch of 138 | ; files from a glob(3) pattern. This directive can be used everywhere in the 139 | ; file. 140 | ; Relative path can also be used. They will be prefixed by: 141 | ; - the global prefix if it's been set (-p argument) 142 | ; - /usr otherwise 143 | include=/etc/php81/php-fpm.d/*.conf 144 | -------------------------------------------------------------------------------- /config/php81/php-fpm.d/www.conf: -------------------------------------------------------------------------------- 1 | ; Start a new pool named 'www'. 2 | ; the variable $pool can be used in any directive and will be replaced by the 3 | ; pool name ('www' here) 4 | [www] 5 | 6 | ; Per pool prefix 7 | ; It only applies on the following directives: 8 | ; - 'access.log' 9 | ; - 'slowlog' 10 | ; - 'listen' (unixsocket) 11 | ; - 'chroot' 12 | ; - 'chdir' 13 | ; - 'php_values' 14 | ; - 'php_admin_values' 15 | ; When not set, the global prefix (or /usr) applies instead. 16 | ; Note: This directive can also be relative to the global prefix. 17 | ; Default Value: none 18 | ;prefix = /path/to/pools/$pool 19 | 20 | ; Unix user/group of the child processes. This can be used only if the master 21 | ; process running user is root. It is set after the child process is created. 22 | ; The user and group can be specified either by their name or by their numeric 23 | ; IDs. 24 | ; Note: If the user is root, the executable needs to be started with 25 | ; --allow-to-run-as-root option to work. 26 | ; Default Values: The user is set to master process running user by default. 27 | ; If the group is not set, the user's group is used. 28 | user = nobody 29 | group = nobody 30 | 31 | ; The address on which to accept FastCGI requests. 32 | ; Valid syntaxes are: 33 | ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on 34 | ; a specific port; 35 | ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on 36 | ; a specific port; 37 | ; 'port' - to listen on a TCP socket to all addresses 38 | ; (IPv6 and IPv4-mapped) on a specific port; 39 | ; '/path/to/unix/socket' - to listen on a unix socket. 40 | ; Note: This value is mandatory. 41 | listen = 127.0.0.1:9000 42 | 43 | ; Set listen(2) backlog. 44 | ; Default Value: 511 (-1 on FreeBSD and OpenBSD) 45 | ;listen.backlog = 511 46 | 47 | ; Set permissions for unix socket, if one is used. In Linux, read/write 48 | ; permissions must be set in order to allow connections from a web server. Many 49 | ; BSD-derived systems allow connections regardless of permissions. The owner 50 | ; and group can be specified either by name or by their numeric IDs. 51 | ; Default Values: Owner is set to the master process running user. If the group 52 | ; is not set, the owner's group is used. Mode is set to 0660. 53 | ;listen.owner = nobody 54 | ;listen.group = nobody 55 | ;listen.mode = 0660 56 | 57 | ; When POSIX Access Control Lists are supported you can set them using 58 | ; these options, value is a comma separated list of user/group names. 59 | ; When set, listen.owner and listen.group are ignored 60 | ;listen.acl_users = 61 | ;listen.acl_groups = 62 | 63 | ; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. 64 | ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original 65 | ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address 66 | ; must be separated by a comma. If this value is left blank, connections will be 67 | ; accepted from any ip address. 68 | ; Default Value: any 69 | ;listen.allowed_clients = 127.0.0.1 70 | 71 | ; Specify the nice(2) priority to apply to the pool processes (only if set) 72 | ; The value can vary from -19 (highest priority) to 20 (lower priority) 73 | ; Note: - It will only work if the FPM master process is launched as root 74 | ; - The pool processes will inherit the master process priority 75 | ; unless it specified otherwise 76 | ; Default Value: no set 77 | ; process.priority = -19 78 | 79 | ; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user 80 | ; or group is different than the master process user. It allows to create process 81 | ; core dump and ptrace the process for the pool user. 82 | ; Default Value: no 83 | ; process.dumpable = yes 84 | 85 | ; Choose how the process manager will control the number of child processes. 86 | ; Possible Values: 87 | ; static - a fixed number (pm.max_children) of child processes; 88 | ; dynamic - the number of child processes are set dynamically based on the 89 | ; following directives. With this process management, there will be 90 | ; always at least 1 children. 91 | ; pm.max_children - the maximum number of children that can 92 | ; be alive at the same time. 93 | ; pm.start_servers - the number of children created on startup. 94 | ; pm.min_spare_servers - the minimum number of children in 'idle' 95 | ; state (waiting to process). If the number 96 | ; of 'idle' processes is less than this 97 | ; number then some children will be created. 98 | ; pm.max_spare_servers - the maximum number of children in 'idle' 99 | ; state (waiting to process). If the number 100 | ; of 'idle' processes is greater than this 101 | ; number then some children will be killed. 102 | ; pm.max_spawn_rate - the maximum number of rate to spawn child 103 | ; processes at once. 104 | ; ondemand - no children are created at startup. Children will be forked when 105 | ; new requests will connect. The following parameter are used: 106 | ; pm.max_children - the maximum number of children that 107 | ; can be alive at the same time. 108 | ; pm.process_idle_timeout - The number of seconds after which 109 | ; an idle process will be killed. 110 | ; Note: This value is mandatory. 111 | pm = dynamic 112 | 113 | ; The number of child processes to be created when pm is set to 'static' and the 114 | ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. 115 | ; This value sets the limit on the number of simultaneous requests that will be 116 | ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. 117 | ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP 118 | ; CGI. The below defaults are based on a server without much resources. Don't 119 | ; forget to tweak pm.* to fit your needs. 120 | ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' 121 | ; Note: This value is mandatory. 122 | pm.max_children = 5 123 | 124 | ; The number of child processes created on startup. 125 | ; Note: Used only when pm is set to 'dynamic' 126 | ; Default Value: (min_spare_servers + max_spare_servers) / 2 127 | pm.start_servers = 2 128 | 129 | ; The desired minimum number of idle server processes. 130 | ; Note: Used only when pm is set to 'dynamic' 131 | ; Note: Mandatory when pm is set to 'dynamic' 132 | pm.min_spare_servers = 1 133 | 134 | ; The desired maximum number of idle server processes. 135 | ; Note: Used only when pm is set to 'dynamic' 136 | ; Note: Mandatory when pm is set to 'dynamic' 137 | pm.max_spare_servers = 3 138 | 139 | ; The number of rate to spawn child processes at once. 140 | ; Note: Used only when pm is set to 'dynamic' 141 | ; Note: Mandatory when pm is set to 'dynamic' 142 | ; Default Value: 32 143 | ;pm.max_spawn_rate = 32 144 | 145 | ; The number of seconds after which an idle process will be killed. 146 | ; Note: Used only when pm is set to 'ondemand' 147 | ; Default Value: 10s 148 | ;pm.process_idle_timeout = 10s; 149 | 150 | ; The number of requests each child process should execute before respawning. 151 | ; This can be useful to work around memory leaks in 3rd party libraries. For 152 | ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. 153 | ; Default Value: 0 154 | ;pm.max_requests = 500 155 | 156 | ; The URI to view the FPM status page. If this value is not set, no URI will be 157 | ; recognized as a status page. It shows the following information: 158 | ; pool - the name of the pool; 159 | ; process manager - static, dynamic or ondemand; 160 | ; start time - the date and time FPM has started; 161 | ; start since - number of seconds since FPM has started; 162 | ; accepted conn - the number of request accepted by the pool; 163 | ; listen queue - the number of request in the queue of pending 164 | ; connections (see backlog in listen(2)); 165 | ; max listen queue - the maximum number of requests in the queue 166 | ; of pending connections since FPM has started; 167 | ; listen queue len - the size of the socket queue of pending connections; 168 | ; idle processes - the number of idle processes; 169 | ; active processes - the number of active processes; 170 | ; total processes - the number of idle + active processes; 171 | ; max active processes - the maximum number of active processes since FPM 172 | ; has started; 173 | ; max children reached - number of times, the process limit has been reached, 174 | ; when pm tries to start more children (works only for 175 | ; pm 'dynamic' and 'ondemand'); 176 | ; Value are updated in real time. 177 | ; Example output: 178 | ; pool: www 179 | ; process manager: static 180 | ; start time: 01/Jul/2011:17:53:49 +0200 181 | ; start since: 62636 182 | ; accepted conn: 190460 183 | ; listen queue: 0 184 | ; max listen queue: 1 185 | ; listen queue len: 42 186 | ; idle processes: 4 187 | ; active processes: 11 188 | ; total processes: 15 189 | ; max active processes: 12 190 | ; max children reached: 0 191 | ; 192 | ; By default the status page output is formatted as text/plain. Passing either 193 | ; 'html', 'xml' or 'json' in the query string will return the corresponding 194 | ; output syntax. Example: 195 | ; http://www.foo.bar/status 196 | ; http://www.foo.bar/status?json 197 | ; http://www.foo.bar/status?html 198 | ; http://www.foo.bar/status?xml 199 | ; 200 | ; By default the status page only outputs short status. Passing 'full' in the 201 | ; query string will also return status for each pool process. 202 | ; Example: 203 | ; http://www.foo.bar/status?full 204 | ; http://www.foo.bar/status?json&full 205 | ; http://www.foo.bar/status?html&full 206 | ; http://www.foo.bar/status?xml&full 207 | ; The Full status returns for each process: 208 | ; pid - the PID of the process; 209 | ; state - the state of the process (Idle, Running, ...); 210 | ; start time - the date and time the process has started; 211 | ; start since - the number of seconds since the process has started; 212 | ; requests - the number of requests the process has served; 213 | ; request duration - the duration in µs of the requests; 214 | ; request method - the request method (GET, POST, ...); 215 | ; request URI - the request URI with the query string; 216 | ; content length - the content length of the request (only with POST); 217 | ; user - the user (PHP_AUTH_USER) (or '-' if not set); 218 | ; script - the main script called (or '-' if not set); 219 | ; last request cpu - the %cpu the last request consumed 220 | ; it's always 0 if the process is not in Idle state 221 | ; because CPU calculation is done when the request 222 | ; processing has terminated; 223 | ; last request memory - the max amount of memory the last request consumed 224 | ; it's always 0 if the process is not in Idle state 225 | ; because memory calculation is done when the request 226 | ; processing has terminated; 227 | ; If the process is in Idle state, then informations are related to the 228 | ; last request the process has served. Otherwise informations are related to 229 | ; the current request being served. 230 | ; Example output: 231 | ; ************************ 232 | ; pid: 31330 233 | ; state: Running 234 | ; start time: 01/Jul/2011:17:53:49 +0200 235 | ; start since: 63087 236 | ; requests: 12808 237 | ; request duration: 1250261 238 | ; request method: GET 239 | ; request URI: /test_mem.php?N=10000 240 | ; content length: 0 241 | ; user: - 242 | ; script: /home/fat/web/docs/php/test_mem.php 243 | ; last request cpu: 0.00 244 | ; last request memory: 0 245 | ; 246 | ; Note: There is a real-time FPM status monitoring sample web page available 247 | ; It's available in: /usr/share/php81/fpm/status.html 248 | ; 249 | ; Note: The value must start with a leading slash (/). The value can be 250 | ; anything, but it may not be a good idea to use the .php extension or it 251 | ; may conflict with a real PHP file. 252 | ; Default Value: not set 253 | ;pm.status_path = /status 254 | 255 | ; The address on which to accept FastCGI status request. This creates a new 256 | ; invisible pool that can handle requests independently. This is useful 257 | ; if the main pool is busy with long running requests because it is still possible 258 | ; to get the status before finishing the long running requests. 259 | ; 260 | ; Valid syntaxes are: 261 | ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on 262 | ; a specific port; 263 | ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on 264 | ; a specific port; 265 | ; 'port' - to listen on a TCP socket to all addresses 266 | ; (IPv6 and IPv4-mapped) on a specific port; 267 | ; '/path/to/unix/socket' - to listen on a unix socket. 268 | ; Default Value: value of the listen option 269 | ;pm.status_listen = 127.0.0.1:9001 270 | 271 | ; The ping URI to call the monitoring page of FPM. If this value is not set, no 272 | ; URI will be recognized as a ping page. This could be used to test from outside 273 | ; that FPM is alive and responding, or to 274 | ; - create a graph of FPM availability (rrd or such); 275 | ; - remove a server from a group if it is not responding (load balancing); 276 | ; - trigger alerts for the operating team (24/7). 277 | ; Note: The value must start with a leading slash (/). The value can be 278 | ; anything, but it may not be a good idea to use the .php extension or it 279 | ; may conflict with a real PHP file. 280 | ; Default Value: not set 281 | ;ping.path = /ping 282 | 283 | ; This directive may be used to customize the response of a ping request. The 284 | ; response is formatted as text/plain with a 200 response code. 285 | ; Default Value: pong 286 | ;ping.response = pong 287 | 288 | ; The access log file 289 | ; Default: not set 290 | ;access.log = log/php81/$pool.access.log 291 | 292 | ; The access log format. 293 | ; The following syntax is allowed 294 | ; %%: the '%' character 295 | ; %C: %CPU used by the request 296 | ; it can accept the following format: 297 | ; - %{user}C for user CPU only 298 | ; - %{system}C for system CPU only 299 | ; - %{total}C for user + system CPU (default) 300 | ; %d: time taken to serve the request 301 | ; it can accept the following format: 302 | ; - %{seconds}d (default) 303 | ; - %{milliseconds}d 304 | ; - %{milli}d 305 | ; - %{microseconds}d 306 | ; - %{micro}d 307 | ; %e: an environment variable (same as $_ENV or $_SERVER) 308 | ; it must be associated with embraces to specify the name of the env 309 | ; variable. Some examples: 310 | ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e 311 | ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e 312 | ; %f: script filename 313 | ; %l: content-length of the request (for POST request only) 314 | ; %m: request method 315 | ; %M: peak of memory allocated by PHP 316 | ; it can accept the following format: 317 | ; - %{bytes}M (default) 318 | ; - %{kilobytes}M 319 | ; - %{kilo}M 320 | ; - %{megabytes}M 321 | ; - %{mega}M 322 | ; %n: pool name 323 | ; %o: output header 324 | ; it must be associated with embraces to specify the name of the header: 325 | ; - %{Content-Type}o 326 | ; - %{X-Powered-By}o 327 | ; - %{Transfert-Encoding}o 328 | ; - .... 329 | ; %p: PID of the child that serviced the request 330 | ; %P: PID of the parent of the child that serviced the request 331 | ; %q: the query string 332 | ; %Q: the '?' character if query string exists 333 | ; %r: the request URI (without the query string, see %q and %Q) 334 | ; %R: remote IP address 335 | ; %s: status (response code) 336 | ; %t: server time the request was received 337 | ; it can accept a strftime(3) format: 338 | ; %d/%b/%Y:%H:%M:%S %z (default) 339 | ; The strftime(3) format must be encapsulated in a %{}t tag 340 | ; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 341 | ; %T: time the log has been written (the request has finished) 342 | ; it can accept a strftime(3) format: 343 | ; %d/%b/%Y:%H:%M:%S %z (default) 344 | ; The strftime(3) format must be encapsulated in a %{}t tag 345 | ; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t 346 | ; %u: remote user 347 | ; 348 | ; Default: "%R - %u %t \"%m %r\" %s" 349 | ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{milli}d %{kilo}M %C%%" 350 | 351 | ; The log file for slow requests 352 | ; Default Value: not set 353 | ; Note: slowlog is mandatory if request_slowlog_timeout is set 354 | ;slowlog = log/php81/$pool.slow.log 355 | 356 | ; The timeout for serving a single request after which a PHP backtrace will be 357 | ; dumped to the 'slowlog' file. A value of '0s' means 'off'. 358 | ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 359 | ; Default Value: 0 360 | ;request_slowlog_timeout = 0 361 | 362 | ; Depth of slow log stack trace. 363 | ; Default Value: 20 364 | ;request_slowlog_trace_depth = 20 365 | 366 | ; The timeout for serving a single request after which the worker process will 367 | ; be killed. This option should be used when the 'max_execution_time' ini option 368 | ; does not stop script execution for some reason. A value of '0' means 'off'. 369 | ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) 370 | ; Default Value: 0 371 | ;request_terminate_timeout = 0 372 | 373 | ; The timeout set by 'request_terminate_timeout' ini option is not engaged after 374 | ; application calls 'fastcgi_finish_request' or when application has finished and 375 | ; shutdown functions are being called (registered via register_shutdown_function). 376 | ; This option will enable timeout limit to be applied unconditionally 377 | ; even in such cases. 378 | ; Default Value: no 379 | ;request_terminate_timeout_track_finished = no 380 | 381 | ; Set open file descriptor rlimit. 382 | ; Default Value: system defined value 383 | ;rlimit_files = 1024 384 | 385 | ; Set max core size rlimit. 386 | ; Possible Values: 'unlimited' or an integer greater or equal to 0 387 | ; Default Value: system defined value 388 | ;rlimit_core = 0 389 | 390 | ; Chroot to this directory at the start. This value must be defined as an 391 | ; absolute path. When this value is not set, chroot is not used. 392 | ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one 393 | ; of its subdirectories. If the pool prefix is not set, the global prefix 394 | ; will be used instead. 395 | ; Note: chrooting is a great security feature and should be used whenever 396 | ; possible. However, all PHP paths will be relative to the chroot 397 | ; (error_log, sessions.save_path, ...). 398 | ; Default Value: not set 399 | ;chroot = 400 | 401 | ; Chdir to this directory at the start. 402 | ; Note: relative path can be used. 403 | ; Default Value: current directory or / when chroot 404 | ;chdir = /var/www 405 | 406 | ; Redirect worker stdout and stderr into main error log. If not set, stdout and 407 | ; stderr will be redirected to /dev/null according to FastCGI specs. 408 | ; Note: on highloaded environment, this can cause some delay in the page 409 | ; process time (several ms). 410 | ; Default Value: no 411 | ;catch_workers_output = yes 412 | 413 | ; Decorate worker output with prefix and suffix containing information about 414 | ; the child that writes to the log and if stdout or stderr is used as well as 415 | ; log level and time. This options is used only if catch_workers_output is yes. 416 | ; Settings to "no" will output data as written to the stdout or stderr. 417 | ; Default value: yes 418 | ;decorate_workers_output = no 419 | 420 | ; Clear environment in FPM workers 421 | ; Prevents arbitrary environment variables from reaching FPM worker processes 422 | ; by clearing the environment in workers before env vars specified in this 423 | ; pool configuration are added. 424 | ; Setting to "no" will make all environment variables available to PHP code 425 | ; via getenv(), $_ENV and $_SERVER. 426 | ; Default Value: yes 427 | ;clear_env = no 428 | 429 | ; Limits the extensions of the main script FPM will allow to parse. This can 430 | ; prevent configuration mistakes on the web server side. You should only limit 431 | ; FPM to .php extensions to prevent malicious users to use other extensions to 432 | ; execute php code. 433 | ; Note: set an empty value to allow all extensions. 434 | ; Default Value: .php 435 | ;security.limit_extensions = .php .php3 .php4 .php5 .php7 436 | 437 | ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from 438 | ; the current environment. 439 | ; Default Value: clean env 440 | ;env[HOSTNAME] = $HOSTNAME 441 | ;env[PATH] = /usr/local/bin:/usr/bin:/bin 442 | ;env[TMP] = /tmp 443 | ;env[TMPDIR] = /tmp 444 | ;env[TEMP] = /tmp 445 | 446 | ; Additional php.ini defines, specific to this pool of workers. These settings 447 | ; overwrite the values previously defined in the php.ini. The directives are the 448 | ; same as the PHP SAPI: 449 | ; php_value/php_flag - you can set classic ini defines which can 450 | ; be overwritten from PHP call 'ini_set'. 451 | ; php_admin_value/php_admin_flag - these directives won't be overwritten by 452 | ; PHP call 'ini_set' 453 | ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. 454 | 455 | ; Defining 'extension' will load the corresponding shared extension from 456 | ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not 457 | ; overwrite previously defined php.ini values, but will append the new value 458 | ; instead. 459 | 460 | ; Note: path INI options can be relative and will be expanded with the prefix 461 | ; (pool, global or /usr) 462 | 463 | ; Default Value: nothing is defined by default except the values in php.ini and 464 | ; specified at startup with the -d argument 465 | ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com 466 | ;php_flag[display_errors] = off 467 | ;php_admin_value[error_log] = /var/log/php81/$pool.error.log 468 | ;php_admin_flag[log_errors] = on 469 | ;php_admin_value[memory_limit] = 32M 470 | -------------------------------------------------------------------------------- /config/php81/php.ini: -------------------------------------------------------------------------------- 1 | [PHP] 2 | 3 | ;;;;;;;;;;;;;;;;;;; 4 | ; About php.ini ; 5 | ;;;;;;;;;;;;;;;;;;; 6 | ; PHP's initialization file, generally called php.ini, is responsible for 7 | ; configuring many of the aspects of PHP's behavior. 8 | 9 | ; PHP attempts to find and load this configuration from a number of locations. 10 | ; The following is a summary of its search order: 11 | ; 1. SAPI module specific location. 12 | ; 2. The PHPRC environment variable. (As of PHP 5.2.0) 13 | ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) 14 | ; 4. Current working directory (except CLI) 15 | ; 5. The web server's directory (for SAPI modules), or directory of PHP 16 | ; (otherwise in Windows) 17 | ; 6. The directory from the --with-config-file-path compile time option, or the 18 | ; Windows directory (usually C:\windows) 19 | ; See the PHP docs for more specific information. 20 | ; https://php.net/configuration.file 21 | 22 | ; The syntax of the file is extremely simple. Whitespace and lines 23 | ; beginning with a semicolon are silently ignored (as you probably guessed). 24 | ; Section headers (e.g. [Foo]) are also silently ignored, even though 25 | ; they might mean something in the future. 26 | 27 | ; Directives following the section heading [PATH=/www/mysite] only 28 | ; apply to PHP files in the /www/mysite directory. Directives 29 | ; following the section heading [HOST=www.example.com] only apply to 30 | ; PHP files served from www.example.com. Directives set in these 31 | ; special sections cannot be overridden by user-defined INI files or 32 | ; at runtime. Currently, [PATH=] and [HOST=] sections only work under 33 | ; CGI/FastCGI. 34 | ; https://php.net/ini.sections 35 | 36 | ; Directives are specified using the following syntax: 37 | ; directive = value 38 | ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. 39 | ; Directives are variables used to configure PHP or PHP extensions. 40 | ; There is no name validation. If PHP can't find an expected 41 | ; directive because it is not set or is mistyped, a default value will be used. 42 | 43 | ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one 44 | ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression 45 | ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a 46 | ; previously set variable or directive (e.g. ${foo}) 47 | 48 | ; Expressions in the INI file are limited to bitwise operators and parentheses: 49 | ; | bitwise OR 50 | ; ^ bitwise XOR 51 | ; & bitwise AND 52 | ; ~ bitwise NOT 53 | ; ! boolean NOT 54 | 55 | ; Boolean flags can be turned on using the values 1, On, True or Yes. 56 | ; They can be turned off using the values 0, Off, False or No. 57 | 58 | ; An empty string can be denoted by simply not writing anything after the equal 59 | ; sign, or by using the None keyword: 60 | 61 | ; foo = ; sets foo to an empty string 62 | ; foo = None ; sets foo to an empty string 63 | ; foo = "None" ; sets foo to the string 'None' 64 | 65 | ; If you use constants in your value, and these constants belong to a 66 | ; dynamically loaded extension (either a PHP extension or a Zend extension), 67 | ; you may only use these constants *after* the line that loads the extension. 68 | 69 | ;;;;;;;;;;;;;;;;;;; 70 | ; About this file ; 71 | ;;;;;;;;;;;;;;;;;;; 72 | ; PHP comes packaged with two INI files. One that is recommended to be used 73 | ; in production environments and one that is recommended to be used in 74 | ; development environments. 75 | 76 | ; php.ini-production contains settings which hold security, performance and 77 | ; best practices at its core. But please be aware, these settings may break 78 | ; compatibility with older or less security conscience applications. We 79 | ; recommending using the production ini in production and testing environments. 80 | 81 | ; php.ini-development is very similar to its production variant, except it is 82 | ; much more verbose when it comes to errors. We recommend using the 83 | ; development version only in development environments, as errors shown to 84 | ; application users can inadvertently leak otherwise secure information. 85 | 86 | ; This is the php.ini-production INI file. 87 | 88 | ;;;;;;;;;;;;;;;;;;; 89 | ; Quick Reference ; 90 | ;;;;;;;;;;;;;;;;;;; 91 | 92 | ; The following are all the settings which are different in either the production 93 | ; or development versions of the INIs with respect to PHP's default behavior. 94 | ; Please see the actual settings later in the document for more details as to why 95 | ; we recommend these changes in PHP's behavior. 96 | 97 | ; display_errors 98 | ; Default Value: On 99 | ; Development Value: On 100 | ; Production Value: Off 101 | 102 | ; display_startup_errors 103 | ; Default Value: On 104 | ; Development Value: On 105 | ; Production Value: Off 106 | 107 | ; error_reporting 108 | ; Default Value: E_ALL 109 | ; Development Value: E_ALL 110 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT 111 | 112 | ; log_errors 113 | ; Default Value: Off 114 | ; Development Value: On 115 | ; Production Value: On 116 | 117 | ; max_input_time 118 | ; Default Value: -1 (Unlimited) 119 | ; Development Value: 60 (60 seconds) 120 | ; Production Value: 60 (60 seconds) 121 | 122 | ; output_buffering 123 | ; Default Value: Off 124 | ; Development Value: 4096 125 | ; Production Value: 4096 126 | 127 | ; register_argc_argv 128 | ; Default Value: On 129 | ; Development Value: Off 130 | ; Production Value: Off 131 | 132 | ; request_order 133 | ; Default Value: None 134 | ; Development Value: "GP" 135 | ; Production Value: "GP" 136 | 137 | ; session.gc_divisor 138 | ; Default Value: 100 139 | ; Development Value: 1000 140 | ; Production Value: 1000 141 | 142 | ; session.sid_bits_per_character 143 | ; Default Value: 4 144 | ; Development Value: 5 145 | ; Production Value: 5 146 | 147 | ; short_open_tag 148 | ; Default Value: On 149 | ; Development Value: Off 150 | ; Production Value: Off 151 | 152 | ; variables_order 153 | ; Default Value: "EGPCS" 154 | ; Development Value: "GPCS" 155 | ; Production Value: "GPCS" 156 | 157 | ; zend.exception_ignore_args 158 | ; Default Value: Off 159 | ; Development Value: Off 160 | ; Production Value: On 161 | 162 | ; zend.exception_string_param_max_len 163 | ; Default Value: 15 164 | ; Development Value: 15 165 | ; Production Value: 0 166 | 167 | ;;;;;;;;;;;;;;;;;;;; 168 | ; php.ini Options ; 169 | ;;;;;;;;;;;;;;;;;;;; 170 | ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" 171 | ;user_ini.filename = ".user.ini" 172 | 173 | ; To disable this feature set this option to an empty value 174 | ;user_ini.filename = 175 | 176 | ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) 177 | ;user_ini.cache_ttl = 300 178 | 179 | ;;;;;;;;;;;;;;;;;;;; 180 | ; Language Options ; 181 | ;;;;;;;;;;;;;;;;;;;; 182 | 183 | ; Enable the PHP scripting language engine under Apache. 184 | ; https://php.net/engine 185 | engine = On 186 | 187 | ; This directive determines whether or not PHP will recognize code between 188 | ; tags as PHP source which should be processed as such. It is 189 | ; generally recommended that should be used and that this feature 190 | ; should be disabled, as enabling it may result in issues when generating XML 191 | ; documents, however this remains supported for backward compatibility reasons. 192 | ; Note that this directive does not control the would work. 332 | ; https://php.net/syntax-highlighting 333 | ;highlight.string = #DD0000 334 | ;highlight.comment = #FF9900 335 | ;highlight.keyword = #007700 336 | ;highlight.default = #0000BB 337 | ;highlight.html = #000000 338 | 339 | ; If enabled, the request will be allowed to complete even if the user aborts 340 | ; the request. Consider enabling it if executing long requests, which may end up 341 | ; being interrupted by the user or a browser timing out. PHP's default behavior 342 | ; is to disable this feature. 343 | ; https://php.net/ignore-user-abort 344 | ;ignore_user_abort = On 345 | 346 | ; Determines the size of the realpath cache to be used by PHP. This value should 347 | ; be increased on systems where PHP opens many files to reflect the quantity of 348 | ; the file operations performed. 349 | ; Note: if open_basedir is set, the cache is disabled 350 | ; https://php.net/realpath-cache-size 351 | ;realpath_cache_size = 4096k 352 | 353 | ; Duration of time, in seconds for which to cache realpath information for a given 354 | ; file or directory. For systems with rarely changing files, consider increasing this 355 | ; value. 356 | ; https://php.net/realpath-cache-ttl 357 | ;realpath_cache_ttl = 120 358 | 359 | ; Enables or disables the circular reference collector. 360 | ; https://php.net/zend.enable-gc 361 | zend.enable_gc = On 362 | 363 | ; If enabled, scripts may be written in encodings that are incompatible with 364 | ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such 365 | ; encodings. To use this feature, mbstring extension must be enabled. 366 | ;zend.multibyte = Off 367 | 368 | ; Allows to set the default encoding for the scripts. This value will be used 369 | ; unless "declare(encoding=...)" directive appears at the top of the script. 370 | ; Only affects if zend.multibyte is set. 371 | ;zend.script_encoding = 372 | 373 | ; Allows to include or exclude arguments from stack traces generated for exceptions. 374 | ; In production, it is recommended to turn this setting on to prohibit the output 375 | ; of sensitive information in stack traces 376 | ; Default Value: Off 377 | ; Development Value: Off 378 | ; Production Value: On 379 | zend.exception_ignore_args = On 380 | 381 | ; Allows setting the maximum string length in an argument of a stringified stack trace 382 | ; to a value between 0 and 1000000. 383 | ; This has no effect when zend.exception_ignore_args is enabled. 384 | ; Default Value: 15 385 | ; Development Value: 15 386 | ; Production Value: 0 387 | ; In production, it is recommended to set this to 0 to reduce the output 388 | ; of sensitive information in stack traces. 389 | zend.exception_string_param_max_len = 0 390 | 391 | ;;;;;;;;;;;;;;;;; 392 | ; Miscellaneous ; 393 | ;;;;;;;;;;;;;;;;; 394 | 395 | ; Decides whether PHP may expose the fact that it is installed on the server 396 | ; (e.g. by adding its signature to the Web server header). It is no security 397 | ; threat in any way, but it makes it possible to determine whether you use PHP 398 | ; on your server or not. 399 | ; https://php.net/expose-php 400 | expose_php = On 401 | 402 | ;;;;;;;;;;;;;;;;;;; 403 | ; Resource Limits ; 404 | ;;;;;;;;;;;;;;;;;;; 405 | 406 | ; Maximum execution time of each script, in seconds 407 | ; https://php.net/max-execution-time 408 | ; Note: This directive is hardcoded to 0 for the CLI SAPI 409 | max_execution_time = 30 410 | 411 | ; Maximum amount of time each script may spend parsing request data. It's a good 412 | ; idea to limit this time on productions servers in order to eliminate unexpectedly 413 | ; long running scripts. 414 | ; Note: This directive is hardcoded to -1 for the CLI SAPI 415 | ; Default Value: -1 (Unlimited) 416 | ; Development Value: 60 (60 seconds) 417 | ; Production Value: 60 (60 seconds) 418 | ; https://php.net/max-input-time 419 | max_input_time = 60 420 | 421 | ; Maximum input variable nesting level 422 | ; https://php.net/max-input-nesting-level 423 | ;max_input_nesting_level = 64 424 | 425 | ; How many GET/POST/COOKIE input variables may be accepted 426 | ;max_input_vars = 1000 427 | 428 | ; Maximum amount of memory a script may consume 429 | ; https://php.net/memory-limit 430 | memory_limit = 128M 431 | 432 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 433 | ; Error handling and logging ; 434 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 435 | 436 | ; This directive informs PHP of which errors, warnings and notices you would like 437 | ; it to take action for. The recommended way of setting values for this 438 | ; directive is through the use of the error level constants and bitwise 439 | ; operators. The error level constants are below here for convenience as well as 440 | ; some common settings and their meanings. 441 | ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT 442 | ; those related to E_NOTICE and E_STRICT, which together cover best practices and 443 | ; recommended coding standards in PHP. For performance reasons, this is the 444 | ; recommend error reporting setting. Your production server shouldn't be wasting 445 | ; resources complaining about best practices and coding standards. That's what 446 | ; development servers and development settings are for. 447 | ; Note: The php.ini-development file has this setting as E_ALL. This 448 | ; means it pretty much reports everything which is exactly what you want during 449 | ; development and early testing. 450 | ; 451 | ; Error Level Constants: 452 | ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) 453 | ; E_ERROR - fatal run-time errors 454 | ; E_RECOVERABLE_ERROR - almost fatal run-time errors 455 | ; E_WARNING - run-time warnings (non-fatal errors) 456 | ; E_PARSE - compile-time parse errors 457 | ; E_NOTICE - run-time notices (these are warnings which often result 458 | ; from a bug in your code, but it's possible that it was 459 | ; intentional (e.g., using an uninitialized variable and 460 | ; relying on the fact it is automatically initialized to an 461 | ; empty string) 462 | ; E_STRICT - run-time notices, enable to have PHP suggest changes 463 | ; to your code which will ensure the best interoperability 464 | ; and forward compatibility of your code 465 | ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup 466 | ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's 467 | ; initial startup 468 | ; E_COMPILE_ERROR - fatal compile-time errors 469 | ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) 470 | ; E_USER_ERROR - user-generated error message 471 | ; E_USER_WARNING - user-generated warning message 472 | ; E_USER_NOTICE - user-generated notice message 473 | ; E_DEPRECATED - warn about code that will not work in future versions 474 | ; of PHP 475 | ; E_USER_DEPRECATED - user-generated deprecation warnings 476 | ; 477 | ; Common Values: 478 | ; E_ALL (Show all errors, warnings and notices including coding standards.) 479 | ; E_ALL & ~E_NOTICE (Show all errors, except for notices) 480 | ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) 481 | ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) 482 | ; Default Value: E_ALL 483 | ; Development Value: E_ALL 484 | ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT 485 | ; https://php.net/error-reporting 486 | error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT 487 | 488 | ; This directive controls whether or not and where PHP will output errors, 489 | ; notices and warnings too. Error output is very useful during development, but 490 | ; it could be very dangerous in production environments. Depending on the code 491 | ; which is triggering the error, sensitive information could potentially leak 492 | ; out of your application such as database usernames and passwords or worse. 493 | ; For production environments, we recommend logging errors rather than 494 | ; sending them to STDOUT. 495 | ; Possible Values: 496 | ; Off = Do not display any errors 497 | ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) 498 | ; On or stdout = Display errors to STDOUT 499 | ; Default Value: On 500 | ; Development Value: On 501 | ; Production Value: Off 502 | ; https://php.net/display-errors 503 | display_errors = Off 504 | 505 | ; The display of errors which occur during PHP's startup sequence are handled 506 | ; separately from display_errors. We strongly recommend you set this to 'off' 507 | ; for production servers to avoid leaking configuration details. 508 | ; Default Value: On 509 | ; Development Value: On 510 | ; Production Value: Off 511 | ; https://php.net/display-startup-errors 512 | display_startup_errors = Off 513 | 514 | ; Besides displaying errors, PHP can also log errors to locations such as a 515 | ; server-specific log, STDERR, or a location specified by the error_log 516 | ; directive found below. While errors should not be displayed on productions 517 | ; servers they should still be monitored and logging is a great way to do that. 518 | ; Default Value: Off 519 | ; Development Value: On 520 | ; Production Value: On 521 | ; https://php.net/log-errors 522 | log_errors = On 523 | 524 | ; Do not log repeated messages. Repeated errors must occur in same file on same 525 | ; line unless ignore_repeated_source is set true. 526 | ; https://php.net/ignore-repeated-errors 527 | ignore_repeated_errors = Off 528 | 529 | ; Ignore source of message when ignoring repeated messages. When this setting 530 | ; is On you will not log errors with repeated messages from different files or 531 | ; source lines. 532 | ; https://php.net/ignore-repeated-source 533 | ignore_repeated_source = Off 534 | 535 | ; If this parameter is set to Off, then memory leaks will not be shown (on 536 | ; stdout or in the log). This is only effective in a debug compile, and if 537 | ; error reporting includes E_WARNING in the allowed list 538 | ; https://php.net/report-memleaks 539 | report_memleaks = On 540 | 541 | ; This setting is off by default. 542 | ;report_zend_debug = 0 543 | 544 | ; Turn off normal error reporting and emit XML-RPC error XML 545 | ; https://php.net/xmlrpc-errors 546 | ;xmlrpc_errors = 0 547 | 548 | ; An XML-RPC faultCode 549 | ;xmlrpc_error_number = 0 550 | 551 | ; When PHP displays or logs an error, it has the capability of formatting the 552 | ; error message as HTML for easier reading. This directive controls whether 553 | ; the error message is formatted as HTML or not. 554 | ; Note: This directive is hardcoded to Off for the CLI SAPI 555 | ; https://php.net/html-errors 556 | ;html_errors = On 557 | 558 | ; If html_errors is set to On *and* docref_root is not empty, then PHP 559 | ; produces clickable error messages that direct to a page describing the error 560 | ; or function causing the error in detail. 561 | ; You can download a copy of the PHP manual from https://php.net/docs 562 | ; and change docref_root to the base URL of your local copy including the 563 | ; leading '/'. You must also specify the file extension being used including 564 | ; the dot. PHP's default behavior is to leave these settings empty, in which 565 | ; case no links to documentation are generated. 566 | ; Note: Never use this feature for production boxes. 567 | ; https://php.net/docref-root 568 | ; Examples 569 | ;docref_root = "/phpmanual/" 570 | 571 | ; https://php.net/docref-ext 572 | ;docref_ext = .html 573 | 574 | ; String to output before an error message. PHP's default behavior is to leave 575 | ; this setting blank. 576 | ; https://php.net/error-prepend-string 577 | ; Example: 578 | ;error_prepend_string = "" 579 | 580 | ; String to output after an error message. PHP's default behavior is to leave 581 | ; this setting blank. 582 | ; https://php.net/error-append-string 583 | ; Example: 584 | ;error_append_string = "" 585 | 586 | ; Log errors to specified file. PHP's default behavior is to leave this value 587 | ; empty. 588 | ; https://php.net/error-log 589 | ; Example: 590 | ;error_log = php_errors.log 591 | ; Log errors to syslog (Event Log on Windows). 592 | ;error_log = syslog 593 | 594 | ; The syslog ident is a string which is prepended to every message logged 595 | ; to syslog. Only used when error_log is set to syslog. 596 | ;syslog.ident = php 597 | 598 | ; The syslog facility is used to specify what type of program is logging 599 | ; the message. Only used when error_log is set to syslog. 600 | ;syslog.facility = user 601 | 602 | ; Set this to disable filtering control characters (the default). 603 | ; Some loggers only accept NVT-ASCII, others accept anything that's not 604 | ; control characters. If your logger accepts everything, then no filtering 605 | ; is needed at all. 606 | ; Allowed values are: 607 | ; ascii (all printable ASCII characters and NL) 608 | ; no-ctrl (all characters except control characters) 609 | ; all (all characters) 610 | ; raw (like "all", but messages are not split at newlines) 611 | ; https://php.net/syslog.filter 612 | ;syslog.filter = ascii 613 | 614 | ;windows.show_crt_warning 615 | ; Default value: 0 616 | ; Development value: 0 617 | ; Production value: 0 618 | 619 | ;;;;;;;;;;;;;;;;; 620 | ; Data Handling ; 621 | ;;;;;;;;;;;;;;;;; 622 | 623 | ; The separator used in PHP generated URLs to separate arguments. 624 | ; PHP's default setting is "&". 625 | ; https://php.net/arg-separator.output 626 | ; Example: 627 | ;arg_separator.output = "&" 628 | 629 | ; List of separator(s) used by PHP to parse input URLs into variables. 630 | ; PHP's default setting is "&". 631 | ; NOTE: Every character in this directive is considered as separator! 632 | ; https://php.net/arg-separator.input 633 | ; Example: 634 | ;arg_separator.input = ";&" 635 | 636 | ; This directive determines which super global arrays are registered when PHP 637 | ; starts up. G,P,C,E & S are abbreviations for the following respective super 638 | ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty 639 | ; paid for the registration of these arrays and because ENV is not as commonly 640 | ; used as the others, ENV is not recommended on productions servers. You 641 | ; can still get access to the environment variables through getenv() should you 642 | ; need to. 643 | ; Default Value: "EGPCS" 644 | ; Development Value: "GPCS" 645 | ; Production Value: "GPCS"; 646 | ; https://php.net/variables-order 647 | variables_order = "GPCS" 648 | 649 | ; This directive determines which super global data (G,P & C) should be 650 | ; registered into the super global array REQUEST. If so, it also determines 651 | ; the order in which that data is registered. The values for this directive 652 | ; are specified in the same manner as the variables_order directive, 653 | ; EXCEPT one. Leaving this value empty will cause PHP to use the value set 654 | ; in the variables_order directive. It does not mean it will leave the super 655 | ; globals array REQUEST empty. 656 | ; Default Value: None 657 | ; Development Value: "GP" 658 | ; Production Value: "GP" 659 | ; https://php.net/request-order 660 | request_order = "GP" 661 | 662 | ; This directive determines whether PHP registers $argv & $argc each time it 663 | ; runs. $argv contains an array of all the arguments passed to PHP when a script 664 | ; is invoked. $argc contains an integer representing the number of arguments 665 | ; that were passed when the script was invoked. These arrays are extremely 666 | ; useful when running scripts from the command line. When this directive is 667 | ; enabled, registering these variables consumes CPU cycles and memory each time 668 | ; a script is executed. For performance reasons, this feature should be disabled 669 | ; on production servers. 670 | ; Note: This directive is hardcoded to On for the CLI SAPI 671 | ; Default Value: On 672 | ; Development Value: Off 673 | ; Production Value: Off 674 | ; https://php.net/register-argc-argv 675 | register_argc_argv = Off 676 | 677 | ; When enabled, the ENV, REQUEST and SERVER variables are created when they're 678 | ; first used (Just In Time) instead of when the script starts. If these 679 | ; variables are not used within a script, having this directive on will result 680 | ; in a performance gain. The PHP directive register_argc_argv must be disabled 681 | ; for this directive to have any effect. 682 | ; https://php.net/auto-globals-jit 683 | auto_globals_jit = On 684 | 685 | ; Whether PHP will read the POST data. 686 | ; This option is enabled by default. 687 | ; Most likely, you won't want to disable this option globally. It causes $_POST 688 | ; and $_FILES to always be empty; the only way you will be able to read the 689 | ; POST data will be through the php://input stream wrapper. This can be useful 690 | ; to proxy requests or to process the POST data in a memory efficient fashion. 691 | ; https://php.net/enable-post-data-reading 692 | ;enable_post_data_reading = Off 693 | 694 | ; Maximum size of POST data that PHP will accept. 695 | ; Its value may be 0 to disable the limit. It is ignored if POST data reading 696 | ; is disabled through enable_post_data_reading. 697 | ; https://php.net/post-max-size 698 | post_max_size = 8M 699 | 700 | ; Automatically add files before PHP document. 701 | ; https://php.net/auto-prepend-file 702 | auto_prepend_file = 703 | 704 | ; Automatically add files after PHP document. 705 | ; https://php.net/auto-append-file 706 | auto_append_file = 707 | 708 | ; By default, PHP will output a media type using the Content-Type header. To 709 | ; disable this, simply set it to be empty. 710 | ; 711 | ; PHP's built-in default media type is set to text/html. 712 | ; https://php.net/default-mimetype 713 | default_mimetype = "text/html" 714 | 715 | ; PHP's default character set is set to UTF-8. 716 | ; https://php.net/default-charset 717 | default_charset = "UTF-8" 718 | 719 | ; PHP internal character encoding is set to empty. 720 | ; If empty, default_charset is used. 721 | ; https://php.net/internal-encoding 722 | ;internal_encoding = 723 | 724 | ; PHP input character encoding is set to empty. 725 | ; If empty, default_charset is used. 726 | ; https://php.net/input-encoding 727 | ;input_encoding = 728 | 729 | ; PHP output character encoding is set to empty. 730 | ; If empty, default_charset is used. 731 | ; See also output_buffer. 732 | ; https://php.net/output-encoding 733 | ;output_encoding = 734 | 735 | ;;;;;;;;;;;;;;;;;;;;;;;;; 736 | ; Paths and Directories ; 737 | ;;;;;;;;;;;;;;;;;;;;;;;;; 738 | 739 | ; UNIX: "/path1:/path2" 740 | include_path = ".:/usr/share/php81" 741 | ; 742 | ; Windows: "\path1;\path2" 743 | ;include_path = ".;c:\php\includes" 744 | ; 745 | ; PHP's default setting for include_path is ".;/path/to/php/pear" 746 | ; https://php.net/include-path 747 | 748 | ; The root of the PHP pages, used only if nonempty. 749 | ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root 750 | ; if you are running php as a CGI under any web server (other than IIS) 751 | ; see documentation for security issues. The alternate is to use the 752 | ; cgi.force_redirect configuration below 753 | ; https://php.net/doc-root 754 | doc_root = 755 | 756 | ; The directory under which PHP opens the script using /~username used only 757 | ; if nonempty. 758 | ; https://php.net/user-dir 759 | user_dir = 760 | 761 | ; Directory in which the loadable extensions (modules) reside. 762 | ; https://php.net/extension-dir 763 | ;extension_dir = "./" 764 | ; On windows: 765 | ;extension_dir = "ext" 766 | 767 | ; Directory where the temporary files should be placed. 768 | ; Defaults to the system default (see sys_get_temp_dir) 769 | ;sys_temp_dir = "/tmp" 770 | 771 | ; Whether or not to enable the dl() function. The dl() function does NOT work 772 | ; properly in multithreaded servers, such as IIS or Zeus, and is automatically 773 | ; disabled on them. 774 | ; https://php.net/enable-dl 775 | enable_dl = Off 776 | 777 | ; cgi.force_redirect is necessary to provide security running PHP as a CGI under 778 | ; most web servers. Left undefined, PHP turns this on by default. You can 779 | ; turn it off here AT YOUR OWN RISK 780 | ; **You CAN safely turn this off for IIS, in fact, you MUST.** 781 | ; https://php.net/cgi.force-redirect 782 | ;cgi.force_redirect = 1 783 | 784 | ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with 785 | ; every request. PHP's default behavior is to disable this feature. 786 | ;cgi.nph = 1 787 | 788 | ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 789 | ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP 790 | ; will look for to know it is OK to continue execution. Setting this variable MAY 791 | ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. 792 | ; https://php.net/cgi.redirect-status-env 793 | ;cgi.redirect_status_env = 794 | 795 | ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's 796 | ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok 797 | ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting 798 | ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting 799 | ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts 800 | ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. 801 | ; https://php.net/cgi.fix-pathinfo 802 | ;cgi.fix_pathinfo=1 803 | 804 | ; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside 805 | ; of the web tree and people will not be able to circumvent .htaccess security. 806 | ;cgi.discard_path=1 807 | 808 | ; FastCGI under IIS supports the ability to impersonate 809 | ; security tokens of the calling client. This allows IIS to define the 810 | ; security context that the request runs under. mod_fastcgi under Apache 811 | ; does not currently support this feature (03/17/2002) 812 | ; Set to 1 if running under IIS. Default is zero. 813 | ; https://php.net/fastcgi.impersonate 814 | ;fastcgi.impersonate = 1 815 | 816 | ; Disable logging through FastCGI connection. PHP's default behavior is to enable 817 | ; this feature. 818 | ;fastcgi.logging = 0 819 | 820 | ; cgi.rfc2616_headers configuration option tells PHP what type of headers to 821 | ; use when sending HTTP response code. If set to 0, PHP sends Status: header that 822 | ; is supported by Apache. When this option is set to 1, PHP will send 823 | ; RFC2616 compliant header. 824 | ; Default is zero. 825 | ; https://php.net/cgi.rfc2616-headers 826 | ;cgi.rfc2616_headers = 0 827 | 828 | ; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! 829 | ; (shebang) at the top of the running script. This line might be needed if the 830 | ; script support running both as stand-alone script and via PHP CGI<. PHP in CGI 831 | ; mode skips this line and ignores its content if this directive is turned on. 832 | ; https://php.net/cgi.check-shebang-line 833 | ;cgi.check_shebang_line=1 834 | 835 | ;;;;;;;;;;;;;;;; 836 | ; File Uploads ; 837 | ;;;;;;;;;;;;;;;; 838 | 839 | ; Whether to allow HTTP file uploads. 840 | ; https://php.net/file-uploads 841 | file_uploads = On 842 | 843 | ; Temporary directory for HTTP uploaded files (will use system default if not 844 | ; specified). 845 | ; https://php.net/upload-tmp-dir 846 | ;upload_tmp_dir = 847 | 848 | ; Maximum allowed size for uploaded files. 849 | ; https://php.net/upload-max-filesize 850 | upload_max_filesize = 2M 851 | 852 | ; Maximum number of files that can be uploaded via a single request 853 | max_file_uploads = 20 854 | 855 | ;;;;;;;;;;;;;;;;;; 856 | ; Fopen wrappers ; 857 | ;;;;;;;;;;;;;;;;;; 858 | 859 | ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. 860 | ; https://php.net/allow-url-fopen 861 | allow_url_fopen = On 862 | 863 | ; Whether to allow include/require to open URLs (like https:// or ftp://) as files. 864 | ; https://php.net/allow-url-include 865 | allow_url_include = Off 866 | 867 | ; Define the anonymous ftp password (your email address). PHP's default setting 868 | ; for this is empty. 869 | ; https://php.net/from 870 | ;from="john@doe.com" 871 | 872 | ; Define the User-Agent string. PHP's default setting for this is empty. 873 | ; https://php.net/user-agent 874 | ;user_agent="PHP" 875 | 876 | ; Default timeout for socket based streams (seconds) 877 | ; https://php.net/default-socket-timeout 878 | default_socket_timeout = 60 879 | 880 | ; If your scripts have to deal with files from Macintosh systems, 881 | ; or you are running on a Mac and need to deal with files from 882 | ; unix or win32 systems, setting this flag will cause PHP to 883 | ; automatically detect the EOL character in those files so that 884 | ; fgets() and file() will work regardless of the source of the file. 885 | ; https://php.net/auto-detect-line-endings 886 | ;auto_detect_line_endings = Off 887 | 888 | ;;;;;;;;;;;;;;;;;;;;;; 889 | ; Dynamic Extensions ; 890 | ;;;;;;;;;;;;;;;;;;;;;; 891 | 892 | ; If you wish to have an extension loaded automatically, use the following 893 | ; syntax: 894 | ; 895 | ; extension=modulename 896 | ; 897 | ; For example: 898 | ; 899 | ; extension=mysqli 900 | ; 901 | ; When the extension library to load is not located in the default extension 902 | ; directory, You may specify an absolute path to the library file: 903 | ; 904 | ; extension=/path/to/extension/mysqli.so 905 | ; 906 | ; Note : The syntax used in previous PHP versions ('extension=.so' and 907 | ; 'extension='php_.dll') is supported for legacy reasons and may be 908 | ; deprecated in a future PHP major version. So, when it is possible, please 909 | ; move to the new ('extension=) syntax. 910 | ; 911 | ; Notes for Windows environments : 912 | ; 913 | ; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+) 914 | ; extension folders as well as the separate PECL DLL download (PHP 5+). 915 | ; Be sure to appropriately set the extension_dir directive. 916 | ; 917 | ;extension=bz2 918 | 919 | ; The ldap extension must be before curl if OpenSSL 1.0.2 and OpenLDAP is used 920 | ; otherwise it results in segfault when unloading after using SASL. 921 | ; See https://github.com/php/php-src/issues/8620 for more info. 922 | ;extension=ldap 923 | 924 | ;extension=curl 925 | ;extension=ffi 926 | ;extension=ftp 927 | ;extension=fileinfo 928 | ;extension=gd 929 | ;extension=gettext 930 | ;extension=gmp 931 | ;extension=intl 932 | ;extension=imap 933 | ;extension=mbstring 934 | ;extension=exif ; Must be after mbstring as it depends on it 935 | ;extension=mysqli 936 | ;extension=oci8_12c ; Use with Oracle Database 12c Instant Client 937 | ;extension=oci8_19 ; Use with Oracle Database 19 Instant Client 938 | ;extension=odbc 939 | ;extension=openssl 940 | ;extension=pdo_firebird 941 | ;extension=pdo_mysql 942 | ;extension=pdo_oci 943 | ;extension=pdo_odbc 944 | ;extension=pdo_pgsql 945 | ;extension=pdo_sqlite 946 | ;extension=pgsql 947 | ;extension=shmop 948 | 949 | ; The MIBS data available in the PHP distribution must be installed. 950 | ; See https://www.php.net/manual/en/snmp.installation.php 951 | ;extension=snmp 952 | 953 | ;extension=soap 954 | ;extension=sockets 955 | ;extension=sodium 956 | ;extension=sqlite3 957 | ;extension=tidy 958 | ;extension=xsl 959 | 960 | ;zend_extension=opcache 961 | 962 | ;;;;;;;;;;;;;;;;;;; 963 | ; Module Settings ; 964 | ;;;;;;;;;;;;;;;;;;; 965 | 966 | [CLI Server] 967 | ; Whether the CLI web server uses ANSI color coding in its terminal output. 968 | cli_server.color = On 969 | 970 | [Date] 971 | ; Defines the default timezone used by the date functions 972 | ; https://php.net/date.timezone 973 | ;date.timezone = 974 | 975 | ; https://php.net/date.default-latitude 976 | ;date.default_latitude = 31.7667 977 | 978 | ; https://php.net/date.default-longitude 979 | ;date.default_longitude = 35.2333 980 | 981 | ; https://php.net/date.sunrise-zenith 982 | ;date.sunrise_zenith = 90.833333 983 | 984 | ; https://php.net/date.sunset-zenith 985 | ;date.sunset_zenith = 90.833333 986 | 987 | [filter] 988 | ; https://php.net/filter.default 989 | ;filter.default = unsafe_raw 990 | 991 | ; https://php.net/filter.default-flags 992 | ;filter.default_flags = 993 | 994 | [iconv] 995 | ; Use of this INI entry is deprecated, use global input_encoding instead. 996 | ; If empty, default_charset or input_encoding or iconv.input_encoding is used. 997 | ; The precedence is: default_charset < input_encoding < iconv.input_encoding 998 | ;iconv.input_encoding = 999 | 1000 | ; Use of this INI entry is deprecated, use global internal_encoding instead. 1001 | ; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. 1002 | ; The precedence is: default_charset < internal_encoding < iconv.internal_encoding 1003 | ;iconv.internal_encoding = 1004 | 1005 | ; Use of this INI entry is deprecated, use global output_encoding instead. 1006 | ; If empty, default_charset or output_encoding or iconv.output_encoding is used. 1007 | ; The precedence is: default_charset < output_encoding < iconv.output_encoding 1008 | ; To use an output encoding conversion, iconv's output handler must be set 1009 | ; otherwise output encoding conversion cannot be performed. 1010 | ;iconv.output_encoding = 1011 | 1012 | [imap] 1013 | ; rsh/ssh logins are disabled by default. Use this INI entry if you want to 1014 | ; enable them. Note that the IMAP library does not filter mailbox names before 1015 | ; passing them to rsh/ssh command, thus passing untrusted data to this function 1016 | ; with rsh/ssh enabled is insecure. 1017 | ;imap.enable_insecure_rsh=0 1018 | 1019 | [intl] 1020 | ;intl.default_locale = 1021 | ; This directive allows you to produce PHP errors when some error 1022 | ; happens within intl functions. The value is the level of the error produced. 1023 | ; Default is 0, which does not produce any errors. 1024 | ;intl.error_level = E_WARNING 1025 | ;intl.use_exceptions = 0 1026 | 1027 | [sqlite3] 1028 | ; Directory pointing to SQLite3 extensions 1029 | ; https://php.net/sqlite3.extension-dir 1030 | ;sqlite3.extension_dir = 1031 | 1032 | ; SQLite defensive mode flag (only available from SQLite 3.26+) 1033 | ; When the defensive flag is enabled, language features that allow ordinary 1034 | ; SQL to deliberately corrupt the database file are disabled. This forbids 1035 | ; writing directly to the schema, shadow tables (eg. FTS data tables), or 1036 | ; the sqlite_dbpage virtual table. 1037 | ; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html 1038 | ; (for older SQLite versions, this flag has no use) 1039 | ;sqlite3.defensive = 1 1040 | 1041 | [Pcre] 1042 | ; PCRE library backtracking limit. 1043 | ; https://php.net/pcre.backtrack-limit 1044 | ;pcre.backtrack_limit=100000 1045 | 1046 | ; PCRE library recursion limit. 1047 | ; Please note that if you set this value to a high number you may consume all 1048 | ; the available process stack and eventually crash PHP (due to reaching the 1049 | ; stack size limit imposed by the Operating System). 1050 | ; https://php.net/pcre.recursion-limit 1051 | ;pcre.recursion_limit=100000 1052 | 1053 | ; Enables or disables JIT compilation of patterns. This requires the PCRE 1054 | ; library to be compiled with JIT support. 1055 | ;pcre.jit=1 1056 | 1057 | [Pdo] 1058 | ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" 1059 | ; https://php.net/pdo-odbc.connection-pooling 1060 | ;pdo_odbc.connection_pooling=strict 1061 | 1062 | [Pdo_mysql] 1063 | ; Default socket name for local MySQL connects. If empty, uses the built-in 1064 | ; MySQL defaults. 1065 | pdo_mysql.default_socket= 1066 | 1067 | [Phar] 1068 | ; https://php.net/phar.readonly 1069 | ;phar.readonly = On 1070 | 1071 | ; https://php.net/phar.require-hash 1072 | ;phar.require_hash = On 1073 | 1074 | ;phar.cache_list = 1075 | 1076 | [mail function] 1077 | ; For Win32 only. 1078 | ; https://php.net/smtp 1079 | SMTP = localhost 1080 | ; https://php.net/smtp-port 1081 | smtp_port = 25 1082 | 1083 | ; For Win32 only. 1084 | ; https://php.net/sendmail-from 1085 | ;sendmail_from = me@example.com 1086 | 1087 | ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). 1088 | ; https://php.net/sendmail-path 1089 | ;sendmail_path = 1090 | 1091 | ; Force the addition of the specified parameters to be passed as extra parameters 1092 | ; to the sendmail binary. These parameters will always replace the value of 1093 | ; the 5th parameter to mail(). 1094 | ;mail.force_extra_parameters = 1095 | 1096 | ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename 1097 | mail.add_x_header = Off 1098 | 1099 | ; The path to a log file that will log all mail() calls. Log entries include 1100 | ; the full path of the script, line number, To address and headers. 1101 | ;mail.log = 1102 | ; Log mail to syslog (Event Log on Windows). 1103 | ;mail.log = syslog 1104 | 1105 | [ODBC] 1106 | ; https://php.net/odbc.default-db 1107 | ;odbc.default_db = Not yet implemented 1108 | 1109 | ; https://php.net/odbc.default-user 1110 | ;odbc.default_user = Not yet implemented 1111 | 1112 | ; https://php.net/odbc.default-pw 1113 | ;odbc.default_pw = Not yet implemented 1114 | 1115 | ; Controls the ODBC cursor model. 1116 | ; Default: SQL_CURSOR_STATIC (default). 1117 | ;odbc.default_cursortype 1118 | 1119 | ; Allow or prevent persistent links. 1120 | ; https://php.net/odbc.allow-persistent 1121 | odbc.allow_persistent = On 1122 | 1123 | ; Check that a connection is still valid before reuse. 1124 | ; https://php.net/odbc.check-persistent 1125 | odbc.check_persistent = On 1126 | 1127 | ; Maximum number of persistent links. -1 means no limit. 1128 | ; https://php.net/odbc.max-persistent 1129 | odbc.max_persistent = -1 1130 | 1131 | ; Maximum number of links (persistent + non-persistent). -1 means no limit. 1132 | ; https://php.net/odbc.max-links 1133 | odbc.max_links = -1 1134 | 1135 | ; Handling of LONG fields. Returns number of bytes to variables. 0 means 1136 | ; passthru. 1137 | ; https://php.net/odbc.defaultlrl 1138 | odbc.defaultlrl = 4096 1139 | 1140 | ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. 1141 | ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation 1142 | ; of odbc.defaultlrl and odbc.defaultbinmode 1143 | ; https://php.net/odbc.defaultbinmode 1144 | odbc.defaultbinmode = 1 1145 | 1146 | [MySQLi] 1147 | 1148 | ; Maximum number of persistent links. -1 means no limit. 1149 | ; https://php.net/mysqli.max-persistent 1150 | mysqli.max_persistent = -1 1151 | 1152 | ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements 1153 | ; https://php.net/mysqli.allow_local_infile 1154 | ;mysqli.allow_local_infile = On 1155 | 1156 | ; It allows the user to specify a folder where files that can be sent via LOAD DATA 1157 | ; LOCAL can exist. It is ignored if mysqli.allow_local_infile is enabled. 1158 | ;mysqli.local_infile_directory = 1159 | 1160 | ; Allow or prevent persistent links. 1161 | ; https://php.net/mysqli.allow-persistent 1162 | mysqli.allow_persistent = On 1163 | 1164 | ; Maximum number of links. -1 means no limit. 1165 | ; https://php.net/mysqli.max-links 1166 | mysqli.max_links = -1 1167 | 1168 | ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use 1169 | ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the 1170 | ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look 1171 | ; at MYSQL_PORT. 1172 | ; https://php.net/mysqli.default-port 1173 | mysqli.default_port = 3306 1174 | 1175 | ; Default socket name for local MySQL connects. If empty, uses the built-in 1176 | ; MySQL defaults. 1177 | ; https://php.net/mysqli.default-socket 1178 | mysqli.default_socket = 1179 | 1180 | ; Default host for mysqli_connect() (doesn't apply in safe mode). 1181 | ; https://php.net/mysqli.default-host 1182 | mysqli.default_host = 1183 | 1184 | ; Default user for mysqli_connect() (doesn't apply in safe mode). 1185 | ; https://php.net/mysqli.default-user 1186 | mysqli.default_user = 1187 | 1188 | ; Default password for mysqli_connect() (doesn't apply in safe mode). 1189 | ; Note that this is generally a *bad* idea to store passwords in this file. 1190 | ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") 1191 | ; and reveal this password! And of course, any users with read access to this 1192 | ; file will be able to reveal the password as well. 1193 | ; https://php.net/mysqli.default-pw 1194 | mysqli.default_pw = 1195 | 1196 | ; Allow or prevent reconnect 1197 | mysqli.reconnect = Off 1198 | 1199 | ; If this option is enabled, closing a persistent connection will rollback 1200 | ; any pending transactions of this connection, before it is put back 1201 | ; into the persistent connection pool. 1202 | ;mysqli.rollback_on_cached_plink = Off 1203 | 1204 | [mysqlnd] 1205 | ; Enable / Disable collection of general statistics by mysqlnd which can be 1206 | ; used to tune and monitor MySQL operations. 1207 | mysqlnd.collect_statistics = On 1208 | 1209 | ; Enable / Disable collection of memory usage statistics by mysqlnd which can be 1210 | ; used to tune and monitor MySQL operations. 1211 | mysqlnd.collect_memory_statistics = Off 1212 | 1213 | ; Records communication from all extensions using mysqlnd to the specified log 1214 | ; file. 1215 | ; https://php.net/mysqlnd.debug 1216 | ;mysqlnd.debug = 1217 | 1218 | ; Defines which queries will be logged. 1219 | ;mysqlnd.log_mask = 0 1220 | 1221 | ; Default size of the mysqlnd memory pool, which is used by result sets. 1222 | ;mysqlnd.mempool_default_size = 16000 1223 | 1224 | ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. 1225 | ;mysqlnd.net_cmd_buffer_size = 2048 1226 | 1227 | ; Size of a pre-allocated buffer used for reading data sent by the server in 1228 | ; bytes. 1229 | ;mysqlnd.net_read_buffer_size = 32768 1230 | 1231 | ; Timeout for network requests in seconds. 1232 | ;mysqlnd.net_read_timeout = 31536000 1233 | 1234 | ; SHA-256 Authentication Plugin related. File with the MySQL server public RSA 1235 | ; key. 1236 | ;mysqlnd.sha256_server_public_key = 1237 | 1238 | [OCI8] 1239 | 1240 | ; Connection: Enables privileged connections using external 1241 | ; credentials (OCI_SYSOPER, OCI_SYSDBA) 1242 | ; https://php.net/oci8.privileged-connect 1243 | ;oci8.privileged_connect = Off 1244 | 1245 | ; Connection: The maximum number of persistent OCI8 connections per 1246 | ; process. Using -1 means no limit. 1247 | ; https://php.net/oci8.max-persistent 1248 | ;oci8.max_persistent = -1 1249 | 1250 | ; Connection: The maximum number of seconds a process is allowed to 1251 | ; maintain an idle persistent connection. Using -1 means idle 1252 | ; persistent connections will be maintained forever. 1253 | ; https://php.net/oci8.persistent-timeout 1254 | ;oci8.persistent_timeout = -1 1255 | 1256 | ; Connection: The number of seconds that must pass before issuing a 1257 | ; ping during oci_pconnect() to check the connection validity. When 1258 | ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables 1259 | ; pings completely. 1260 | ; https://php.net/oci8.ping-interval 1261 | ;oci8.ping_interval = 60 1262 | 1263 | ; Connection: Set this to a user chosen connection class to be used 1264 | ; for all pooled server requests with Oracle 11g Database Resident 1265 | ; Connection Pooling (DRCP). To use DRCP, this value should be set to 1266 | ; the same string for all web servers running the same application, 1267 | ; the database pool must be configured, and the connection string must 1268 | ; specify to use a pooled server. 1269 | ;oci8.connection_class = 1270 | 1271 | ; High Availability: Using On lets PHP receive Fast Application 1272 | ; Notification (FAN) events generated when a database node fails. The 1273 | ; database must also be configured to post FAN events. 1274 | ;oci8.events = Off 1275 | 1276 | ; Tuning: This option enables statement caching, and specifies how 1277 | ; many statements to cache. Using 0 disables statement caching. 1278 | ; https://php.net/oci8.statement-cache-size 1279 | ;oci8.statement_cache_size = 20 1280 | 1281 | ; Tuning: Enables statement prefetching and sets the default number of 1282 | ; rows that will be fetched automatically after statement execution. 1283 | ; https://php.net/oci8.default-prefetch 1284 | ;oci8.default_prefetch = 100 1285 | 1286 | ; Compatibility. Using On means oci_close() will not close 1287 | ; oci_connect() and oci_new_connect() connections. 1288 | ; https://php.net/oci8.old-oci-close-semantics 1289 | ;oci8.old_oci_close_semantics = Off 1290 | 1291 | [PostgreSQL] 1292 | ; Allow or prevent persistent links. 1293 | ; https://php.net/pgsql.allow-persistent 1294 | pgsql.allow_persistent = On 1295 | 1296 | ; Detect broken persistent links always with pg_pconnect(). 1297 | ; Auto reset feature requires a little overheads. 1298 | ; https://php.net/pgsql.auto-reset-persistent 1299 | pgsql.auto_reset_persistent = Off 1300 | 1301 | ; Maximum number of persistent links. -1 means no limit. 1302 | ; https://php.net/pgsql.max-persistent 1303 | pgsql.max_persistent = -1 1304 | 1305 | ; Maximum number of links (persistent+non persistent). -1 means no limit. 1306 | ; https://php.net/pgsql.max-links 1307 | pgsql.max_links = -1 1308 | 1309 | ; Ignore PostgreSQL backends Notice message or not. 1310 | ; Notice message logging require a little overheads. 1311 | ; https://php.net/pgsql.ignore-notice 1312 | pgsql.ignore_notice = 0 1313 | 1314 | ; Log PostgreSQL backends Notice message or not. 1315 | ; Unless pgsql.ignore_notice=0, module cannot log notice message. 1316 | ; https://php.net/pgsql.log-notice 1317 | pgsql.log_notice = 0 1318 | 1319 | [bcmath] 1320 | ; Number of decimal digits for all bcmath functions. 1321 | ; https://php.net/bcmath.scale 1322 | bcmath.scale = 0 1323 | 1324 | [browscap] 1325 | ; https://php.net/browscap 1326 | ;browscap = extra/browscap.ini 1327 | 1328 | [Session] 1329 | ; Handler used to store/retrieve data. 1330 | ; https://php.net/session.save-handler 1331 | session.save_handler = files 1332 | 1333 | ; Argument passed to save_handler. In the case of files, this is the path 1334 | ; where data files are stored. Note: Windows users have to change this 1335 | ; variable in order to use PHP's session functions. 1336 | ; 1337 | ; The path can be defined as: 1338 | ; 1339 | ; session.save_path = "N;/path" 1340 | ; 1341 | ; where N is an integer. Instead of storing all the session files in 1342 | ; /path, what this will do is use subdirectories N-levels deep, and 1343 | ; store the session data in those directories. This is useful if 1344 | ; your OS has problems with many files in one directory, and is 1345 | ; a more efficient layout for servers that handle many sessions. 1346 | ; 1347 | ; NOTE 1: PHP will not create this directory structure automatically. 1348 | ; You can use the script in the ext/session dir for that purpose. 1349 | ; NOTE 2: See the section on garbage collection below if you choose to 1350 | ; use subdirectories for session storage 1351 | ; 1352 | ; The file storage module creates files using mode 600 by default. 1353 | ; You can change that by using 1354 | ; 1355 | ; session.save_path = "N;MODE;/path" 1356 | ; 1357 | ; where MODE is the octal representation of the mode. Note that this 1358 | ; does not overwrite the process's umask. 1359 | ; https://php.net/session.save-path 1360 | ;session.save_path = "/tmp" 1361 | 1362 | ; Whether to use strict session mode. 1363 | ; Strict session mode does not accept an uninitialized session ID, and 1364 | ; regenerates the session ID if the browser sends an uninitialized session ID. 1365 | ; Strict mode protects applications from session fixation via a session adoption 1366 | ; vulnerability. It is disabled by default for maximum compatibility, but 1367 | ; enabling it is encouraged. 1368 | ; https://wiki.php.net/rfc/strict_sessions 1369 | session.use_strict_mode = 0 1370 | 1371 | ; Whether to use cookies. 1372 | ; https://php.net/session.use-cookies 1373 | session.use_cookies = 1 1374 | 1375 | ; https://php.net/session.cookie-secure 1376 | ;session.cookie_secure = 1377 | 1378 | ; This option forces PHP to fetch and use a cookie for storing and maintaining 1379 | ; the session id. We encourage this operation as it's very helpful in combating 1380 | ; session hijacking when not specifying and managing your own session id. It is 1381 | ; not the be-all and end-all of session hijacking defense, but it's a good start. 1382 | ; https://php.net/session.use-only-cookies 1383 | session.use_only_cookies = 1 1384 | 1385 | ; Name of the session (used as cookie name). 1386 | ; https://php.net/session.name 1387 | session.name = PHPSESSID 1388 | 1389 | ; Initialize session on request startup. 1390 | ; https://php.net/session.auto-start 1391 | session.auto_start = 0 1392 | 1393 | ; Lifetime in seconds of cookie or, if 0, until browser is restarted. 1394 | ; https://php.net/session.cookie-lifetime 1395 | session.cookie_lifetime = 0 1396 | 1397 | ; The path for which the cookie is valid. 1398 | ; https://php.net/session.cookie-path 1399 | session.cookie_path = / 1400 | 1401 | ; The domain for which the cookie is valid. 1402 | ; https://php.net/session.cookie-domain 1403 | session.cookie_domain = 1404 | 1405 | ; Whether or not to add the httpOnly flag to the cookie, which makes it 1406 | ; inaccessible to browser scripting languages such as JavaScript. 1407 | ; https://php.net/session.cookie-httponly 1408 | session.cookie_httponly = 1409 | 1410 | ; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF) 1411 | ; Current valid values are "Strict", "Lax" or "None". When using "None", 1412 | ; make sure to include the quotes, as `none` is interpreted like `false` in ini files. 1413 | ; https://tools.ietf.org/html/draft-west-first-party-cookies-07 1414 | session.cookie_samesite = 1415 | 1416 | ; Handler used to serialize data. php is the standard serializer of PHP. 1417 | ; https://php.net/session.serialize-handler 1418 | session.serialize_handler = php 1419 | 1420 | ; Defines the probability that the 'garbage collection' process is started on every 1421 | ; session initialization. The probability is calculated by using gc_probability/gc_divisor, 1422 | ; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. 1423 | ; Default Value: 1 1424 | ; Development Value: 1 1425 | ; Production Value: 1 1426 | ; https://php.net/session.gc-probability 1427 | session.gc_probability = 1 1428 | 1429 | ; Defines the probability that the 'garbage collection' process is started on every 1430 | ; session initialization. The probability is calculated by using gc_probability/gc_divisor, 1431 | ; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. 1432 | ; For high volume production servers, using a value of 1000 is a more efficient approach. 1433 | ; Default Value: 100 1434 | ; Development Value: 1000 1435 | ; Production Value: 1000 1436 | ; https://php.net/session.gc-divisor 1437 | session.gc_divisor = 1000 1438 | 1439 | ; After this number of seconds, stored data will be seen as 'garbage' and 1440 | ; cleaned up by the garbage collection process. 1441 | ; https://php.net/session.gc-maxlifetime 1442 | session.gc_maxlifetime = 1440 1443 | 1444 | ; NOTE: If you are using the subdirectory option for storing session files 1445 | ; (see session.save_path above), then garbage collection does *not* 1446 | ; happen automatically. You will need to do your own garbage 1447 | ; collection through a shell script, cron entry, or some other method. 1448 | ; For example, the following script is the equivalent of setting 1449 | ; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): 1450 | ; find /path/to/sessions -cmin +24 -type f | xargs rm 1451 | 1452 | ; Check HTTP Referer to invalidate externally stored URLs containing ids. 1453 | ; HTTP_REFERER has to contain this substring for the session to be 1454 | ; considered as valid. 1455 | ; https://php.net/session.referer-check 1456 | session.referer_check = 1457 | 1458 | ; Set to {nocache,private,public,} to determine HTTP caching aspects 1459 | ; or leave this empty to avoid sending anti-caching headers. 1460 | ; https://php.net/session.cache-limiter 1461 | session.cache_limiter = nocache 1462 | 1463 | ; Document expires after n minutes. 1464 | ; https://php.net/session.cache-expire 1465 | session.cache_expire = 180 1466 | 1467 | ; trans sid support is disabled by default. 1468 | ; Use of trans sid may risk your users' security. 1469 | ; Use this option with caution. 1470 | ; - User may send URL contains active session ID 1471 | ; to other person via. email/irc/etc. 1472 | ; - URL that contains active session ID may be stored 1473 | ; in publicly accessible computer. 1474 | ; - User may access your site with the same session ID 1475 | ; always using URL stored in browser's history or bookmarks. 1476 | ; https://php.net/session.use-trans-sid 1477 | session.use_trans_sid = 0 1478 | 1479 | ; Set session ID character length. This value could be between 22 to 256. 1480 | ; Shorter length than default is supported only for compatibility reason. 1481 | ; Users should use 32 or more chars. 1482 | ; https://php.net/session.sid-length 1483 | ; Default Value: 32 1484 | ; Development Value: 26 1485 | ; Production Value: 26 1486 | session.sid_length = 26 1487 | 1488 | ; The URL rewriter will look for URLs in a defined set of HTML tags. 1489 | ;
is special; if you include them here, the rewriter will 1490 | ; add a hidden field with the info which is otherwise appended 1491 | ; to URLs. tag's action attribute URL will not be modified 1492 | ; unless it is specified. 1493 | ; Note that all valid entries require a "=", even if no value follows. 1494 | ; Default Value: "a=href,area=href,frame=src,form=" 1495 | ; Development Value: "a=href,area=href,frame=src,form=" 1496 | ; Production Value: "a=href,area=href,frame=src,form=" 1497 | ; https://php.net/url-rewriter.tags 1498 | session.trans_sid_tags = "a=href,area=href,frame=src,form=" 1499 | 1500 | ; URL rewriter does not rewrite absolute URLs by default. 1501 | ; To enable rewrites for absolute paths, target hosts must be specified 1502 | ; at RUNTIME. i.e. use ini_set() 1503 | ; tags is special. PHP will check action attribute's URL regardless 1504 | ; of session.trans_sid_tags setting. 1505 | ; If no host is defined, HTTP_HOST will be used for allowed host. 1506 | ; Example value: php.net,www.php.net,wiki.php.net 1507 | ; Use "," for multiple hosts. No spaces are allowed. 1508 | ; Default Value: "" 1509 | ; Development Value: "" 1510 | ; Production Value: "" 1511 | ;session.trans_sid_hosts="" 1512 | 1513 | ; Define how many bits are stored in each character when converting 1514 | ; the binary hash data to something readable. 1515 | ; Possible values: 1516 | ; 4 (4 bits: 0-9, a-f) 1517 | ; 5 (5 bits: 0-9, a-v) 1518 | ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") 1519 | ; Default Value: 4 1520 | ; Development Value: 5 1521 | ; Production Value: 5 1522 | ; https://php.net/session.hash-bits-per-character 1523 | session.sid_bits_per_character = 5 1524 | 1525 | ; Enable upload progress tracking in $_SESSION 1526 | ; Default Value: On 1527 | ; Development Value: On 1528 | ; Production Value: On 1529 | ; https://php.net/session.upload-progress.enabled 1530 | ;session.upload_progress.enabled = On 1531 | 1532 | ; Cleanup the progress information as soon as all POST data has been read 1533 | ; (i.e. upload completed). 1534 | ; Default Value: On 1535 | ; Development Value: On 1536 | ; Production Value: On 1537 | ; https://php.net/session.upload-progress.cleanup 1538 | ;session.upload_progress.cleanup = On 1539 | 1540 | ; A prefix used for the upload progress key in $_SESSION 1541 | ; Default Value: "upload_progress_" 1542 | ; Development Value: "upload_progress_" 1543 | ; Production Value: "upload_progress_" 1544 | ; https://php.net/session.upload-progress.prefix 1545 | ;session.upload_progress.prefix = "upload_progress_" 1546 | 1547 | ; The index name (concatenated with the prefix) in $_SESSION 1548 | ; containing the upload progress information 1549 | ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" 1550 | ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" 1551 | ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" 1552 | ; https://php.net/session.upload-progress.name 1553 | ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" 1554 | 1555 | ; How frequently the upload progress should be updated. 1556 | ; Given either in percentages (per-file), or in bytes 1557 | ; Default Value: "1%" 1558 | ; Development Value: "1%" 1559 | ; Production Value: "1%" 1560 | ; https://php.net/session.upload-progress.freq 1561 | ;session.upload_progress.freq = "1%" 1562 | 1563 | ; The minimum delay between updates, in seconds 1564 | ; Default Value: 1 1565 | ; Development Value: 1 1566 | ; Production Value: 1 1567 | ; https://php.net/session.upload-progress.min-freq 1568 | ;session.upload_progress.min_freq = "1" 1569 | 1570 | ; Only write session data when session data is changed. Enabled by default. 1571 | ; https://php.net/session.lazy-write 1572 | ;session.lazy_write = On 1573 | 1574 | [Assertion] 1575 | ; Switch whether to compile assertions at all (to have no overhead at run-time) 1576 | ; -1: Do not compile at all 1577 | ; 0: Jump over assertion at run-time 1578 | ; 1: Execute assertions 1579 | ; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) 1580 | ; Default Value: 1 1581 | ; Development Value: 1 1582 | ; Production Value: -1 1583 | ; https://php.net/zend.assertions 1584 | zend.assertions = -1 1585 | 1586 | ; Assert(expr); active by default. 1587 | ; https://php.net/assert.active 1588 | ;assert.active = On 1589 | 1590 | ; Throw an AssertionError on failed assertions 1591 | ; https://php.net/assert.exception 1592 | ;assert.exception = On 1593 | 1594 | ; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) 1595 | ; https://php.net/assert.warning 1596 | ;assert.warning = On 1597 | 1598 | ; Don't bail out by default. 1599 | ; https://php.net/assert.bail 1600 | ;assert.bail = Off 1601 | 1602 | ; User-function to be called if an assertion fails. 1603 | ; https://php.net/assert.callback 1604 | ;assert.callback = 0 1605 | 1606 | [COM] 1607 | ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs 1608 | ; https://php.net/com.typelib-file 1609 | ;com.typelib_file = 1610 | 1611 | ; allow Distributed-COM calls 1612 | ; https://php.net/com.allow-dcom 1613 | ;com.allow_dcom = true 1614 | 1615 | ; autoregister constants of a component's typelib on com_load() 1616 | ; https://php.net/com.autoregister-typelib 1617 | ;com.autoregister_typelib = true 1618 | 1619 | ; register constants casesensitive 1620 | ; https://php.net/com.autoregister-casesensitive 1621 | ;com.autoregister_casesensitive = false 1622 | 1623 | ; show warnings on duplicate constant registrations 1624 | ; https://php.net/com.autoregister-verbose 1625 | ;com.autoregister_verbose = true 1626 | 1627 | ; The default character set code-page to use when passing strings to and from COM objects. 1628 | ; Default: system ANSI code page 1629 | ;com.code_page= 1630 | 1631 | ; The version of the .NET framework to use. The value of the setting are the first three parts 1632 | ; of the framework's version number, separated by dots, and prefixed with "v", e.g. "v4.0.30319". 1633 | ;com.dotnet_version= 1634 | 1635 | [mbstring] 1636 | ; language for internal character representation. 1637 | ; This affects mb_send_mail() and mbstring.detect_order. 1638 | ; https://php.net/mbstring.language 1639 | ;mbstring.language = Japanese 1640 | 1641 | ; Use of this INI entry is deprecated, use global internal_encoding instead. 1642 | ; internal/script encoding. 1643 | ; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) 1644 | ; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. 1645 | ; The precedence is: default_charset < internal_encoding < iconv.internal_encoding 1646 | ;mbstring.internal_encoding = 1647 | 1648 | ; Use of this INI entry is deprecated, use global input_encoding instead. 1649 | ; http input encoding. 1650 | ; mbstring.encoding_translation = On is needed to use this setting. 1651 | ; If empty, default_charset or input_encoding or mbstring.input is used. 1652 | ; The precedence is: default_charset < input_encoding < mbstring.http_input 1653 | ; https://php.net/mbstring.http-input 1654 | ;mbstring.http_input = 1655 | 1656 | ; Use of this INI entry is deprecated, use global output_encoding instead. 1657 | ; http output encoding. 1658 | ; mb_output_handler must be registered as output buffer to function. 1659 | ; If empty, default_charset or output_encoding or mbstring.http_output is used. 1660 | ; The precedence is: default_charset < output_encoding < mbstring.http_output 1661 | ; To use an output encoding conversion, mbstring's output handler must be set 1662 | ; otherwise output encoding conversion cannot be performed. 1663 | ; https://php.net/mbstring.http-output 1664 | ;mbstring.http_output = 1665 | 1666 | ; enable automatic encoding translation according to 1667 | ; mbstring.internal_encoding setting. Input chars are 1668 | ; converted to internal encoding by setting this to On. 1669 | ; Note: Do _not_ use automatic encoding translation for 1670 | ; portable libs/applications. 1671 | ; https://php.net/mbstring.encoding-translation 1672 | ;mbstring.encoding_translation = Off 1673 | 1674 | ; automatic encoding detection order. 1675 | ; "auto" detect order is changed according to mbstring.language 1676 | ; https://php.net/mbstring.detect-order 1677 | ;mbstring.detect_order = auto 1678 | 1679 | ; substitute_character used when character cannot be converted 1680 | ; one from another 1681 | ; https://php.net/mbstring.substitute-character 1682 | ;mbstring.substitute_character = none 1683 | 1684 | ; Enable strict encoding detection. 1685 | ;mbstring.strict_detection = Off 1686 | 1687 | ; This directive specifies the regex pattern of content types for which mb_output_handler() 1688 | ; is activated. 1689 | ; Default: mbstring.http_output_conv_mimetypes=^(text/|application/xhtml\+xml) 1690 | ;mbstring.http_output_conv_mimetypes= 1691 | 1692 | ; This directive specifies maximum stack depth for mbstring regular expressions. It is similar 1693 | ; to the pcre.recursion_limit for PCRE. 1694 | ;mbstring.regex_stack_limit=100000 1695 | 1696 | ; This directive specifies maximum retry count for mbstring regular expressions. It is similar 1697 | ; to the pcre.backtrack_limit for PCRE. 1698 | ;mbstring.regex_retry_limit=1000000 1699 | 1700 | [gd] 1701 | ; Tell the jpeg decode to ignore warnings and try to create 1702 | ; a gd image. The warning will then be displayed as notices 1703 | ; disabled by default 1704 | ; https://php.net/gd.jpeg-ignore-warning 1705 | ;gd.jpeg_ignore_warning = 1 1706 | 1707 | [exif] 1708 | ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 1709 | ; With mbstring support this will automatically be converted into the encoding 1710 | ; given by corresponding encode setting. When empty mbstring.internal_encoding 1711 | ; is used. For the decode settings you can distinguish between motorola and 1712 | ; intel byte order. A decode setting cannot be empty. 1713 | ; https://php.net/exif.encode-unicode 1714 | ;exif.encode_unicode = ISO-8859-15 1715 | 1716 | ; https://php.net/exif.decode-unicode-motorola 1717 | ;exif.decode_unicode_motorola = UCS-2BE 1718 | 1719 | ; https://php.net/exif.decode-unicode-intel 1720 | ;exif.decode_unicode_intel = UCS-2LE 1721 | 1722 | ; https://php.net/exif.encode-jis 1723 | ;exif.encode_jis = 1724 | 1725 | ; https://php.net/exif.decode-jis-motorola 1726 | ;exif.decode_jis_motorola = JIS 1727 | 1728 | ; https://php.net/exif.decode-jis-intel 1729 | ;exif.decode_jis_intel = JIS 1730 | 1731 | [Tidy] 1732 | ; The path to a default tidy configuration file to use when using tidy 1733 | ; https://php.net/tidy.default-config 1734 | ;tidy.default_config = /usr/local/lib/php/default.tcfg 1735 | 1736 | ; Should tidy clean and repair output automatically? 1737 | ; WARNING: Do not use this option if you are generating non-html content 1738 | ; such as dynamic images 1739 | ; https://php.net/tidy.clean-output 1740 | tidy.clean_output = Off 1741 | 1742 | [soap] 1743 | ; Enables or disables WSDL caching feature. 1744 | ; https://php.net/soap.wsdl-cache-enabled 1745 | soap.wsdl_cache_enabled=1 1746 | 1747 | ; Sets the directory name where SOAP extension will put cache files. 1748 | ; https://php.net/soap.wsdl-cache-dir 1749 | soap.wsdl_cache_dir="/tmp" 1750 | 1751 | ; (time to live) Sets the number of second while cached file will be used 1752 | ; instead of original one. 1753 | ; https://php.net/soap.wsdl-cache-ttl 1754 | soap.wsdl_cache_ttl=86400 1755 | 1756 | ; Sets the size of the cache limit. (Max. number of WSDL files to cache) 1757 | soap.wsdl_cache_limit = 5 1758 | 1759 | [sysvshm] 1760 | ; A default size of the shared memory segment 1761 | ;sysvshm.init_mem = 10000 1762 | 1763 | [ldap] 1764 | ; Sets the maximum number of open links or -1 for unlimited. 1765 | ldap.max_links = -1 1766 | 1767 | [dba] 1768 | ;dba.default_handler= 1769 | 1770 | [opcache] 1771 | ; Determines if Zend OPCache is enabled 1772 | ;opcache.enable=1 1773 | 1774 | ; Determines if Zend OPCache is enabled for the CLI version of PHP 1775 | ;opcache.enable_cli=0 1776 | 1777 | ; The OPcache shared memory storage size. 1778 | ;opcache.memory_consumption=128 1779 | 1780 | ; The amount of memory for interned strings in Mbytes. 1781 | ;opcache.interned_strings_buffer=8 1782 | 1783 | ; The maximum number of keys (scripts) in the OPcache hash table. 1784 | ; Only numbers between 200 and 1000000 are allowed. 1785 | ;opcache.max_accelerated_files=10000 1786 | 1787 | ; The maximum percentage of "wasted" memory until a restart is scheduled. 1788 | ;opcache.max_wasted_percentage=5 1789 | 1790 | ; When this directive is enabled, the OPcache appends the current working 1791 | ; directory to the script key, thus eliminating possible collisions between 1792 | ; files with the same name (basename). Disabling the directive improves 1793 | ; performance, but may break existing applications. 1794 | ;opcache.use_cwd=1 1795 | 1796 | ; When disabled, you must reset the OPcache manually or restart the 1797 | ; webserver for changes to the filesystem to take effect. 1798 | ;opcache.validate_timestamps=1 1799 | 1800 | ; How often (in seconds) to check file timestamps for changes to the shared 1801 | ; memory storage allocation. ("1" means validate once per second, but only 1802 | ; once per request. "0" means always validate) 1803 | ;opcache.revalidate_freq=2 1804 | 1805 | ; Enables or disables file search in include_path optimization 1806 | ;opcache.revalidate_path=0 1807 | 1808 | ; If disabled, all PHPDoc comments are dropped from the code to reduce the 1809 | ; size of the optimized code. 1810 | ;opcache.save_comments=1 1811 | 1812 | ; If enabled, compilation warnings (including notices and deprecations) will 1813 | ; be recorded and replayed each time a file is included. Otherwise, compilation 1814 | ; warnings will only be emitted when the file is first cached. 1815 | ;opcache.record_warnings=0 1816 | 1817 | ; Allow file existence override (file_exists, etc.) performance feature. 1818 | ;opcache.enable_file_override=0 1819 | 1820 | ; A bitmask, where each bit enables or disables the appropriate OPcache 1821 | ; passes 1822 | ;opcache.optimization_level=0x7FFFBFFF 1823 | 1824 | ;opcache.dups_fix=0 1825 | 1826 | ; The location of the OPcache blacklist file (wildcards allowed). 1827 | ; Each OPcache blacklist file is a text file that holds the names of files 1828 | ; that should not be accelerated. The file format is to add each filename 1829 | ; to a new line. The filename may be a full path or just a file prefix 1830 | ; (i.e., /var/www/x blacklists all the files and directories in /var/www 1831 | ; that start with 'x'). Line starting with a ; are ignored (comments). 1832 | ;opcache.blacklist_filename= 1833 | 1834 | ; Allows exclusion of large files from being cached. By default all files 1835 | ; are cached. 1836 | ;opcache.max_file_size=0 1837 | 1838 | ; Check the cache checksum each N requests. 1839 | ; The default value of "0" means that the checks are disabled. 1840 | ;opcache.consistency_checks=0 1841 | 1842 | ; How long to wait (in seconds) for a scheduled restart to begin if the cache 1843 | ; is not being accessed. 1844 | ;opcache.force_restart_timeout=180 1845 | 1846 | ; OPcache error_log file name. Empty string assumes "stderr". 1847 | ;opcache.error_log= 1848 | 1849 | ; All OPcache errors go to the Web server log. 1850 | ; By default, only fatal errors (level 0) or errors (level 1) are logged. 1851 | ; You can also enable warnings (level 2), info messages (level 3) or 1852 | ; debug messages (level 4). 1853 | ;opcache.log_verbosity_level=1 1854 | 1855 | ; Preferred Shared Memory back-end. Leave empty and let the system decide. 1856 | ;opcache.preferred_memory_model= 1857 | 1858 | ; Protect the shared memory from unexpected writing during script execution. 1859 | ; Useful for internal debugging only. 1860 | ;opcache.protect_memory=0 1861 | 1862 | ; Allows calling OPcache API functions only from PHP scripts which path is 1863 | ; started from specified string. The default "" means no restriction 1864 | ;opcache.restrict_api= 1865 | 1866 | ; Mapping base of shared memory segments (for Windows only). All the PHP 1867 | ; processes have to map shared memory into the same address space. This 1868 | ; directive allows to manually fix the "Unable to reattach to base address" 1869 | ; errors. 1870 | ;opcache.mmap_base= 1871 | 1872 | ; Facilitates multiple OPcache instances per user (for Windows only). All PHP 1873 | ; processes with the same cache ID and user share an OPcache instance. 1874 | ;opcache.cache_id= 1875 | 1876 | ; Enables and sets the second level cache directory. 1877 | ; It should improve performance when SHM memory is full, at server restart or 1878 | ; SHM reset. The default "" disables file based caching. 1879 | ;opcache.file_cache= 1880 | 1881 | ; Enables or disables opcode caching in shared memory. 1882 | ;opcache.file_cache_only=0 1883 | 1884 | ; Enables or disables checksum validation when script loaded from file cache. 1885 | ;opcache.file_cache_consistency_checks=1 1886 | 1887 | ; Implies opcache.file_cache_only=1 for a certain process that failed to 1888 | ; reattach to the shared memory (for Windows only). Explicitly enabled file 1889 | ; cache is required. 1890 | ;opcache.file_cache_fallback=1 1891 | 1892 | ; Enables or disables copying of PHP code (text segment) into HUGE PAGES. 1893 | ; This should improve performance, but requires appropriate OS configuration. 1894 | ;opcache.huge_code_pages=1 1895 | 1896 | ; Validate cached file permissions. 1897 | ;opcache.validate_permission=0 1898 | 1899 | ; Prevent name collisions in chroot'ed environment. 1900 | ;opcache.validate_root=0 1901 | 1902 | ; If specified, it produces opcode dumps for debugging different stages of 1903 | ; optimizations. 1904 | ;opcache.opt_debug_level=0 1905 | 1906 | ; Specifies a PHP script that is going to be compiled and executed at server 1907 | ; start-up. 1908 | ; https://php.net/opcache.preload 1909 | ;opcache.preload= 1910 | 1911 | ; Preloading code as root is not allowed for security reasons. This directive 1912 | ; facilitates to let the preloading to be run as another user. 1913 | ; https://php.net/opcache.preload_user 1914 | ;opcache.preload_user= 1915 | 1916 | ; Prevents caching files that are less than this number of seconds old. It 1917 | ; protects from caching of incompletely updated files. In case all file updates 1918 | ; on your site are atomic, you may increase performance by setting it to "0". 1919 | ;opcache.file_update_protection=2 1920 | 1921 | ; Absolute path used to store shared lockfiles (for *nix only). 1922 | ;opcache.lockfile_path=/tmp 1923 | 1924 | [curl] 1925 | ; A default value for the CURLOPT_CAINFO option. This is required to be an 1926 | ; absolute path. 1927 | ;curl.cainfo = 1928 | 1929 | [openssl] 1930 | ; The location of a Certificate Authority (CA) file on the local filesystem 1931 | ; to use when verifying the identity of SSL/TLS peers. Most users should 1932 | ; not specify a value for this directive as PHP will attempt to use the 1933 | ; OS-managed cert stores in its absence. If specified, this value may still 1934 | ; be overridden on a per-stream basis via the "cafile" SSL stream context 1935 | ; option. 1936 | ;openssl.cafile= 1937 | 1938 | ; If openssl.cafile is not specified or if the CA file is not found, the 1939 | ; directory pointed to by openssl.capath is searched for a suitable 1940 | ; certificate. This value must be a correctly hashed certificate directory. 1941 | ; Most users should not specify a value for this directive as PHP will 1942 | ; attempt to use the OS-managed cert stores in its absence. If specified, 1943 | ; this value may still be overridden on a per-stream basis via the "capath" 1944 | ; SSL stream context option. 1945 | ;openssl.capath= 1946 | 1947 | [ffi] 1948 | ; FFI API restriction. Possible values: 1949 | ; "preload" - enabled in CLI scripts and preloaded files (default) 1950 | ; "false" - always disabled 1951 | ; "true" - always enabled 1952 | ;ffi.enable=preload 1953 | 1954 | ; List of headers files to preload, wildcard patterns allowed. 1955 | ;ffi.preload= 1956 | -------------------------------------------------------------------------------- /docker-compose.yml: -------------------------------------------------------------------------------- 1 | version: "3" 2 | services: 3 | 4 | nginx.docker: 5 | container_name: "php_nginx" 6 | image: php_nginx 7 | user: root 8 | working_dir: /app/ 9 | volumes: 10 | - ./:/app/ 11 | expose: 12 | - 3000 13 | - 80 14 | ports: 15 | - 3000:3000 16 | - 80:80 17 | command: "/./app/docker/nginx/start.sh" 18 | -------------------------------------------------------------------------------- /docker/apply-config.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | rm -rf /etc/nginx 4 | cp -R /app/config/nginx /etc 5 | service nginx restart 6 | 7 | rm -rf /etc/php81 8 | cp -R /app/config/php81 /etc/php81 9 | service php-fpm81 restart 10 | 11 | -------------------------------------------------------------------------------- /docker/build.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | # NGinx 4 | ./docker/nginx/build.sh 5 | -------------------------------------------------------------------------------- /docker/init.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | # Build Docker images 4 | echo "Building Docker Images..." 5 | ./docker/build.sh 6 | 7 | echo "Starting up Docker Containers..." 8 | ./docker/up.sh 9 | -------------------------------------------------------------------------------- /docker/nginx/Dockerfile: -------------------------------------------------------------------------------- 1 | # our base image 2 | FROM alpine:latest 3 | 4 | # specify the port number the container should expose 5 | EXPOSE 3000 6 | EXPOSE 80 7 | 8 | # User user as root 9 | USER root 10 | 11 | # Create App 12 | RUN mkdir /app 13 | 14 | # Installing Services 15 | RUN apk update 16 | RUN apk add bash 17 | RUN apk add openrc 18 | RUN mkdir /run/openrc && touch /run/openrc/softlevel 19 | RUN rc-status 20 | 21 | #NGinx 22 | RUN apk add nginx 23 | RUN rc-update add nginx 24 | 25 | # PHP 26 | RUN apk add php81 27 | RUN apk add php81-fpm 28 | RUN apk add php81-pdo_mysql 29 | RUN apk add php81-mysqli 30 | RUN apk add php81-mbstring 31 | RUN apk add php81-xmlreader 32 | RUN apk add php81-curl 33 | RUN apk add php81-iconv 34 | RUN apk add php81-zip 35 | RUN apk add php81-gd 36 | RUN apk add php81-fpm 37 | -------------------------------------------------------------------------------- /docker/nginx/build.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | # Remove Old Image 4 | docker rm -f php_nginx 5 | 6 | # No Cache Build 7 | docker build --no-cache -t php_nginx -f docker/nginx/Dockerfile . 8 | 9 | -------------------------------------------------------------------------------- /docker/nginx/ssh.sh: -------------------------------------------------------------------------------- 1 | #!/bin/bash 2 | 3 | bash -c "clear && docker exec -it php_nginx bash" 4 | -------------------------------------------------------------------------------- /docker/nginx/start.sh: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | rm -rf /etc/nginx 4 | cp -R /app/config/nginx /etc 5 | service nginx restart 6 | 7 | rm -rf /etc/php81 8 | cp -R /app/config/php81 /etc/php81 9 | service php-fpm81 restart 10 | 11 | # Keep Container Running 12 | tail -f /dev/null 13 | -------------------------------------------------------------------------------- /docker/up.sh: -------------------------------------------------------------------------------- 1 | docker-compose up -d 2 | -------------------------------------------------------------------------------- /www/index.php: -------------------------------------------------------------------------------- 1 | 
2 | 
5 |
6 | --------------------------------------------------------------------------------