├── .gitignore ├── README.md ├── app-monitor ├── .gitignore ├── build.gradle ├── proguard-rules.pro └── src │ └── main │ ├── AndroidManifest.xml │ └── java │ └── dev │ └── xesam │ └── android │ └── toolbox │ └── appmonitor │ ├── ProcessMonitor.java │ └── ScreenBroadcastReceiver.java ├── app ├── .gitignore ├── build.gradle ├── proguard-rules.pro └── src │ └── main │ ├── AndroidManifest.xml │ ├── java │ └── dev │ │ └── xesam │ │ └── android │ │ └── toolbox │ │ └── appmonitordemo │ │ └── MainActivity.java │ └── res │ ├── drawable │ └── ic_launcher.png │ ├── layout │ └── activity_main.xml │ └── values │ ├── colors.xml │ ├── dimens.xml │ ├── strings.xml │ └── styles.xml ├── app14 ├── .gitignore ├── build.gradle ├── proguard-rules.pro └── src │ └── main │ ├── AndroidManifest.xml │ ├── java │ └── dev │ │ └── xesam │ │ └── android │ │ └── app14 │ │ ├── App.java │ │ └── MainActivity.java │ └── res │ ├── drawable │ └── ic_launcher.png │ ├── layout │ └── activity_main.xml │ └── values │ ├── colors.xml │ ├── dimens.xml │ ├── strings.xml │ └── styles.xml ├── build.gradle ├── gradle.properties ├── gradlew ├── gradlew.bat └── settings.gradle /.gitignore: -------------------------------------------------------------------------------- 1 | *.iml 2 | *.idea 3 | .gradle 4 | /gradle 5 | /local.properties 6 | /.idea/workspace.xml 7 | /.idea/libraries 8 | .DS_Store 9 | /build 10 | /captures 11 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | 2 | # 【Android】前后台切换监听 3 | 4 | Android 本身并有提供这样的监听，所以就只能走偏门了。 5 | 6 | 首先，需要定义一下，什么叫“前台”，什么叫“后台”。本文定义如下： 7 | 8 | 前台 9 | 10 | Activity 处在 FOREGROUND 优先级 11 | 12 | 后台 13 | 14 | App进程没有停止，除去在“前台”的所有情况 15 | 16 | 所以，退到后台的方式太多了，大致有： 17 | 18 | 1. 按Home键 19 | 2. 按“最近任务”键 20 | 3. 从通知栏启动其他应用 21 | 4. 从应用内部启动其他应用 22 | 5. 关掉屏幕 23 | 24 | 既然是监听变化，所以肯定是在相关生命周期的回调中来进行处理。ActivityA 启动 ActivityB 的生命周期方法调用顺序如下： 25 | 26 | ActivityA#onPause -> ActivityB#onStart -> ActivityB#onResume -> ActivityA#onStop 27 | 28 | 从 ActivityB 回退到 ActivityA 的生命周期方法调用顺序如下： 29 | 30 | ActivityB#onPause -> ActivityA#onStart -> ActivityA#onResume -> ActivityB#onStop -> ActivityB#onDestroy 31 | 32 | 33 | 一个思路就是通过统计当前活动的 Activity 数目来计算。 34 | 35 | 在 Activity#onStart 中来检测前一个状态是否是“后台”，如果是，则触发“切换到前台”事件，并将活动 Activity 数目加1。 36 | 在 Activity#onStop 中并将活动 Activity 数目减1。如果活动的 Activity 数目等于0， 37 | 就认为当前应用处于“后台”状态， 并触发“切换到后台”事件。 38 | 39 | 所以，一个初步方案大致是，实现一个基类 BaseActivity，并重写以下 onStart 和 onStop 回调方法： 40 | 41 | ```java 42 | private static int compatStartCount = 0; 43 | private static boolean isCompatForeground = true; 44 | 45 | @Override 46 | public void onStart() { 47 | super.onStart(); 48 | compatStartCount++; 49 | if (!isCompatForeground) { 50 | isCompatForeground = true; 51 | onBackgroundToForeground(activity); 52 | } 53 | } 54 | 55 | @Override 56 | public void onStop() { 57 | super.onStop(); 58 | compatStartCount--; 59 | if (compatStartCount == 0) { 60 | isCompatForeground = false; 61 | onForegroundToBackground(activity); 62 | } 63 | } 64 | ``` 65 | 66 | ## 开始趟坑 67 | 68 | 1. 在关掉/点亮屏幕的情况下，android3 之前不会触发 onStart 和 onStop 回调。只会触发 onPause 和 onResume。所以以上代码失效。 69 | 按理来说，这应该是 Android 的含糊之处，onStop 的触发时机定义如下： 70 | 71 | Called when you are no longer visible to the user 72 | 73 | 按理来说，屏幕关闭的时候也符合条件，但是 android3 之前并未按照如此定义而来。所以需要 hack 一下： 74 | 75 | ```java 76 | private static boolean isCompatLockStop = false; 77 | 78 | private static boolean isStandard() { 79 | return Build.VERSION.SDK_INT >= Build.VERSION_CODES.HONEYCOMB; 80 | } 81 | 82 | public static boolean isInteractive(Context context) { 83 | PowerManager pm = (PowerManager) context.getSystemService(Context.POWER_SERVICE); 84 | if (Build.VERSION.SDK_INT >= VERSION_CODES.KITKAT_WATCH) { 85 | return pm.isInteractive(); 86 | } else { 87 | return pm.isScreenOn(); 88 | } 89 | } 90 | 91 | @Override 92 | protected void onResume() { 93 | super.onResume(); 94 | if (isStandard()) { 95 | //np 96 | } else { 97 | if (isCompatLockStop) { 98 | isCompatLockStop = false; 99 | onStart(); 100 | } 101 | } 102 | } 103 | 104 | @Override 105 | protected void onPause() { 106 | super.onPause(); 107 | if (isStandard()) { 108 | //np 109 | } else { 110 | if (!isInteractive(activity)) { //锁屏触发 111 | isCompatLockStop = true; 112 | onStop(); 113 | } 114 | } 115 | } 116 | ``` 117 | 118 | 对于 android3 之前的系统，我们在 onPause 中处理 锁屏问题，如果 onPause 被触发的时候，手机处于 “非交互” 状态，就认为是按下了电源键（或者其他锁屏方式），触发“后台”状态。 119 | 在 onResume 中判断如果是从锁屏界面恢复，则回到“前台”状态。 120 | 121 | 存在问题：点亮屏幕的时候就被认为回到“前台”状态，这个暂未找到好的方法避免。 122 | 123 | 2. 快速锁屏/点亮的情况下，会多次触发生命周期回调。 124 | 125 | 这个问题在 nexus 5 （Android 6.0） 上稳定重现，重现步骤：关掉屏幕后快速点亮再快速关闭。本来预期的表现应该是： 126 | 127 | onPause 128 | onStop 129 | 130 | 但是实际的表现如下： 131 | 132 | onPause 133 | onStop 134 | onStart 135 | onResume 136 | onPause 137 | onStop 138 | 139 | 所以，最终结果就是： 140 | 141 | 前台 -> 后台 142 | 后台 -> 前台 143 | 前台 -> 后台 144 | 145 | 多了一个周期。 146 | 147 | 这个问题我还没有解决。尝试过解决办法有： 148 | 149 | 1.在 onStart 中判断 inKeyguardRestrictedInputMode 状态： 150 | 151 | ```java 152 | public static boolean inKeyguardRestrictedInputMode(Context context) { 153 | KeyguardManager keyguardManager = (KeyguardManager) context.getSystemService(Context.KEYGUARD_SERVICE); 154 | return keyguardManager.inKeyguardRestrictedInputMode(); 155 | } 156 | ``` 157 | 158 | 在锁屏状态下就不触发计数。但是这个判断根本不可信，在快速切换的情况下，在非锁屏情况下返回 true 的几率也比较大。 159 | 160 | 2. 网上有一种判断应用是否在前台的方法 161 | 162 | ```java 163 | public boolean isAppOnForeground() { 164 | 165 | ActivityManager activityManager = (ActivityManager) getApplicationContext().getSystemService(Context.ACTIVITY_SERVICE); 166 | String packageName = getApplicationContext().getPackageName(); 167 | 168 | List appProcesses = activityManager 169 | .getRunningAppProcesses(); 170 | if (appProcesses == null) 171 | return false; 172 | 173 | for (ActivityManager.RunningAppProcessInfo appProcess : appProcesses) { 174 | // The name of the process that this object is associated with. 175 | if (appProcess.processName.equals(packageName) 176 | && appProcess.importance == ActivityManager.RunningAppProcessInfo.IMPORTANCE_FOREGROUND) { 177 | return true; 178 | } 179 | } 180 | return false; 181 | } 182 | ``` 183 | 184 | 但是这种测试方法并不靠谱，比如在魅族手机上，锁屏状态下也是返回 true。 185 | 186 | 3. 监听 ACTION_USER_PRESENT， ACTION_SCREEN_ON， ACTION_SCREEN_OFF 等事件。 187 | 188 | 回调事件比较晚，在生命周期中已经跑完好几圈之后，广播才接收到。而且在各个生命周期内无法判断是否因为锁屏导致的周期变化。 189 | 190 | 顺便说一下， ACTION_USER_PRESENT 和 ACTION_SCREEN_ON 存在下面几种情况: 191 | 192 | 1. 只触发 ACTION_SCREEN_ON 193 | 2. 先触发 ACTION_SCREEN_ON，再触发 ACTION_USER_PRESENT （电源键，然后解锁） 194 | 3. 先触发 ACTION_USER_PRESENT，再触发 ACTION_SCREEN_ON （指纹解锁） 195 | 196 | 这样的话，无法通过简单的计数来判断，需要加入 hashCode 来处理。 197 | 198 | 所以最终这种快速切换的情况被我忽略了，因为无非就是多了一个周期而已。 199 | 200 | ## 不完美实现 201 | 202 | 对于 API>=14 的系统上，可以直接增加 ActivityLifecycleCallbacks 监听，这样可以省去定义 BaseActivity 的步骤，减少侵入性。 203 | 204 | 所以在 API>=14 的系统上，直接使用 ActivityLifecycleCallbacks， 如果需要兼容 2.3，那么还是需要抽象出 BaseActivity。 205 | 206 | 演示代码地址 ： [https://github.com/xesam/AppMonitor](https://github.com/xesam/AppMonitor) 207 | 208 | -------------------------------------------------------------------------------- /app-monitor/.gitignore: -------------------------------------------------------------------------------- 1 | /build 2 | -------------------------------------------------------------------------------- /app-monitor/build.gradle: -------------------------------------------------------------------------------- 1 | apply plugin: 'com.android.library' 2 | 3 | android { 4 | compileSdkVersion 23 5 | buildToolsVersion "23.0.2" 6 | 7 | defaultConfig { 8 | minSdkVersion 9 9 | targetSdkVersion 23 10 | versionCode 1 11 | versionName "1.0" 12 | } 13 | buildTypes { 14 | release { 15 | minifyEnabled false 16 | proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro' 17 | } 18 | } 19 | } 20 | 21 | dependencies { 22 | compile fileTree(dir: 'libs', include: ['*.jar']) 23 | testCompile 'junit:junit:4.12' 24 | compile 'com.android.support:appcompat-v7:23.2.0' 25 | } 26 | -------------------------------------------------------------------------------- /app-monitor/proguard-rules.pro: -------------------------------------------------------------------------------- 1 | # Add project specific ProGuard rules here. 2 | # By default, the flags in this file are appended to flags specified 3 | # in /apps/android-sdk-linux/tools/proguard/proguard-android.txt 4 | # You can edit the include path and order by changing the proguardFiles 5 | # directive in build.gradle. 6 | # 7 | # For more details, see 8 | # http://developer.android.com/guide/developing/tools/proguard.html 9 | 10 | # Add any project specific keep options here: 11 | 12 | # If your project uses WebView with JS, uncomment the following 13 | # and specify the fully qualified class name to the JavaScript interface 14 | # class: 15 | #-keepclassmembers class fqcn.of.javascript.interface.for.webview { 16 | # public *; 17 | #} 18 | -------------------------------------------------------------------------------- /app-monitor/src/main/AndroidManifest.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | -------------------------------------------------------------------------------- /app-monitor/src/main/java/dev/xesam/android/toolbox/appmonitor/ProcessMonitor.java: -------------------------------------------------------------------------------- 1 | package dev.xesam.android.toolbox.appmonitor; 2 | 3 | import android.app.Activity; 4 | import android.app.Application; 5 | import android.content.Context; 6 | import android.os.Build; 7 | import android.os.Bundle; 8 | import android.os.PowerManager; 9 | import android.util.Log; 10 | 11 | 12 | /** 13 | * 前后台切换监听 14 | *

15 | * Created by xesamguo@gmail.com on 16-3-7. 16 | */ 17 | public class ProcessMonitor { 18 | 19 | private static final String TAG = "ProcessMonitor"; 20 | 21 | private static int compatStartCount = 0; 22 | 23 | private static boolean isCompatForeground = true; 24 | private static boolean isCompatLockStop = false; 25 | 26 | private static boolean isStandard() { 27 | return Build.VERSION.SDK_INT >= Build.VERSION_CODES.HONEYCOMB; 28 | } 29 | 30 | public static boolean isInteractive(Context context) { 31 | PowerManager pm = (PowerManager) context.getSystemService(Context.POWER_SERVICE); 32 | if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT_WATCH) { 33 | return pm.isInteractive(); 34 | } else { 35 | return pm.isScreenOn(); 36 | } 37 | } 38 | 39 | public static void onStart(Activity activity) { 40 | compatStartCount++; 41 | if (!isCompatForeground) { 42 | isCompatForeground = true; 43 | onBackgroundToForeground(activity); 44 | } 45 | } 46 | 47 | public static void onResume(Activity activity) { 48 | if (isStandard()) { 49 | //np 50 | } else { 51 | if (isCompatLockStop) { 52 | isCompatLockStop = false; 53 | onStart(activity); 54 | } 55 | } 56 | } 57 | 58 | public static void onPause(Activity activity) { 59 | if (isStandard()) { 60 | //np 61 | } else { 62 | if (!isInteractive(activity)) { //锁屏触发 63 | isCompatLockStop = true; 64 | onStop(activity); 65 | } 66 | } 67 | } 68 | 69 | public static void onStop(Activity activity) { 70 | compatStartCount--; 71 | if (compatStartCount == 0) { 72 | isCompatForeground = false; 73 | onForegroundToBackground(activity); 74 | } 75 | } 76 | 77 | public static void onForegroundToBackground(Activity activity) { 78 | Log.e(TAG, activity.getClass().getSimpleName() + ":前台->后台"); 79 | 80 | } 81 | 82 | public static void onBackgroundToForeground(Activity activity) { 83 | Log.e(TAG, activity.getClass().getSimpleName() + ":后台->前台"); 84 | } 85 | 86 | private static Application.ActivityLifecycleCallbacks activityLifecycleCallbacks; 87 | 88 | public static void attach(Application application) { 89 | if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) { 90 | if (activityLifecycleCallbacks == null) { 91 | activityLifecycleCallbacks = new Application.ActivityLifecycleCallbacks() { 92 | 93 | ScreenBroadcastReceiver screenBroadcastReceiver = new ScreenBroadcastReceiver(); 94 | 95 | private int mStartCount = 0; 96 | 97 | private boolean mIsForeground = true; 98 | 99 | @Override 100 | public void onActivityCreated(Activity activity, Bundle savedInstanceState) { 101 | screenBroadcastReceiver.register(activity); 102 | } 103 | 104 | @Override 105 | public void onActivityStarted(Activity activity) { 106 | mStartCount++; 107 | 108 | if (!mIsForeground) { 109 | mIsForeground = true; 110 | onBackgroundToForeground(activity); 111 | } 112 | } 113 | 114 | @Override 115 | public void onActivityResumed(Activity activity) { 116 | } 117 | 118 | @Override 119 | public void onActivityPaused(Activity activity) { 120 | } 121 | 122 | @Override 123 | public void onActivityStopped(Activity activity) { 124 | mStartCount--; 125 | if (mStartCount == 0) { 126 | mIsForeground = false; 127 | onForegroundToBackground(activity); 128 | } 129 | } 130 | 131 | @Override 132 | public void onActivitySaveInstanceState(Activity activity, Bundle outState) { 133 | 134 | } 135 | 136 | @Override 137 | public void onActivityDestroyed(Activity activity) { 138 | screenBroadcastReceiver.unRegister(activity); 139 | } 140 | }; 141 | } 142 | application.registerActivityLifecycleCallbacks(activityLifecycleCallbacks); 143 | } else { 144 | //np 145 | } 146 | } 147 | 148 | public static void detach(Application application) { 149 | if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) { 150 | if (activityLifecycleCallbacks != null) { 151 | application.unregisterActivityLifecycleCallbacks(activityLifecycleCallbacks); 152 | } 153 | } 154 | } 155 | } 156 | -------------------------------------------------------------------------------- /app-monitor/src/main/java/dev/xesam/android/toolbox/appmonitor/ScreenBroadcastReceiver.java: -------------------------------------------------------------------------------- 1 | package dev.xesam.android.toolbox.appmonitor; 2 | 3 | import android.content.BroadcastReceiver; 4 | import android.content.Context; 5 | import android.content.Intent; 6 | import android.content.IntentFilter; 7 | import android.os.Build; 8 | import android.util.Log; 9 | 10 | /** 11 | * Created by xesamguo@gmail.com on 16-3-8. 12 | */ 13 | public class ScreenBroadcastReceiver extends BroadcastReceiver { 14 | 15 | @Override 16 | public void onReceive(Context context, Intent intent) { 17 | final String action = intent.getAction(); 18 | Log.e("onReceive", action); 19 | } 20 | 21 | public void register(Context context) { 22 | IntentFilter filter = new IntentFilter(); 23 | filter.addAction(Intent.ACTION_SCREEN_ON); 24 | filter.addAction(Intent.ACTION_SCREEN_OFF); 25 | filter.addAction(Intent.ACTION_USER_PRESENT); 26 | if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.JELLY_BEAN_MR1) { 27 | filter.addAction(Intent.ACTION_USER_BACKGROUND); 28 | filter.addAction(Intent.ACTION_USER_FOREGROUND); 29 | filter.addAction(Intent.ACTION_USER_INITIALIZE); 30 | } 31 | context.registerReceiver(this, filter); 32 | } 33 | 34 | public void unRegister(Context context) { 35 | context.unregisterReceiver(this); 36 | } 37 | } 38 | -------------------------------------------------------------------------------- /app/.gitignore: -------------------------------------------------------------------------------- 1 | /build 2 | -------------------------------------------------------------------------------- /app/build.gradle: -------------------------------------------------------------------------------- 1 | apply plugin: 'com.android.application' 2 | 3 | android { 4 | compileSdkVersion 23 5 | buildToolsVersion "23.0.2" 6 | 7 | defaultConfig { 8 | applicationId "dev.xesam.android.toolbox.appmonitordemo" 9 | minSdkVersion 9 10 | targetSdkVersion 23 11 | versionCode 1 12 | versionName "1.0" 13 | } 14 | buildTypes { 15 | release { 16 | minifyEnabled false 17 | proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro' 18 | } 19 | } 20 | } 21 | 22 | dependencies { 23 | compile fileTree(include: ['*.jar'], dir: 'libs') 24 | testCompile 'junit:junit:4.12' 25 | compile 'com.android.support:appcompat-v7:23.2.0' 26 | compile project(':app-monitor') 27 | } 28 | -------------------------------------------------------------------------------- /app/proguard-rules.pro: -------------------------------------------------------------------------------- 1 | # Add project specific ProGuard rules here. 2 | # By default, the flags in this file are appended to flags specified 3 | # in /apps/android-sdk-linux/tools/proguard/proguard-android.txt 4 | # You can edit the include path and order by changing the proguardFiles 5 | # directive in build.gradle. 6 | # 7 | # For more details, see 8 | # http://developer.android.com/guide/developing/tools/proguard.html 9 | 10 | # Add any project specific keep options here: 11 | 12 | # If your project uses WebView with JS, uncomment the following 13 | # and specify the fully qualified class name to the JavaScript interface 14 | # class: 15 | #-keepclassmembers class fqcn.of.javascript.interface.for.webview { 16 | # public *; 17 | #} 18 | -------------------------------------------------------------------------------- /app/src/main/AndroidManifest.xml: -------------------------------------------------------------------------------- 1 | 2 | 4 | 5 | 6 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | -------------------------------------------------------------------------------- /app/src/main/java/dev/xesam/android/toolbox/appmonitordemo/MainActivity.java: -------------------------------------------------------------------------------- 1 | package dev.xesam.android.toolbox.appmonitordemo; 2 | 3 | import android.support.v7.app.AppCompatActivity; 4 | import android.os.Bundle; 5 | 6 | import dev.xesam.android.toolbox.appmonitor.ProcessMonitor; 7 | import dev.xesam.android.toolbox.appmonitor.ScreenBroadcastReceiver; 8 | 9 | public class MainActivity extends AppCompatActivity { 10 | 11 | ScreenBroadcastReceiver screenBroadcastReceiver = new ScreenBroadcastReceiver(); 12 | 13 | @Override 14 | protected void onCreate(Bundle savedInstanceState) { 15 | super.onCreate(savedInstanceState); 16 | setContentView(R.layout.activity_main); 17 | screenBroadcastReceiver.register(this); 18 | } 19 | 20 | @Override 21 | protected void onStart() { 22 | super.onStart(); 23 | ProcessMonitor.onStart(this); 24 | } 25 | 26 | @Override 27 | protected void onResume() { 28 | super.onResume(); 29 | ProcessMonitor.onResume(this); 30 | } 31 | 32 | @Override 33 | protected void onPause() { 34 | super.onPause(); 35 | ProcessMonitor.onPause(this); 36 | } 37 | 38 | @Override 39 | protected void onStop() { 40 | super.onStop(); 41 | ProcessMonitor.onStop(this); 42 | } 43 | 44 | @Override 45 | protected void onDestroy() { 46 | super.onDestroy(); 47 | screenBroadcastReceiver.unRegister(this); 48 | } 49 | } 50 | -------------------------------------------------------------------------------- /app/src/main/res/drawable/ic_launcher.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/xesam/AppMonitor/049bbef8d858fbcd6f328288437a6e2854927ef4/app/src/main/res/drawable/ic_launcher.png -------------------------------------------------------------------------------- /app/src/main/res/layout/activity_main.xml: -------------------------------------------------------------------------------- 1 | 2 | 11 | 12 | 16 | 17 | -------------------------------------------------------------------------------- /app/src/main/res/values/colors.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | #3F51B5 4 | #303F9F 5 | #FF4081 6 | 7 | -------------------------------------------------------------------------------- /app/src/main/res/values/dimens.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 16dp 4 | 16dp 5 | 6 | -------------------------------------------------------------------------------- /app/src/main/res/values/strings.xml: -------------------------------------------------------------------------------- 1 | 2 | AppMonitor 3 | 4 | -------------------------------------------------------------------------------- /app/src/main/res/values/styles.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 10 | 11 | 12 | -------------------------------------------------------------------------------- /app14/.gitignore: -------------------------------------------------------------------------------- 1 | /build 2 | -------------------------------------------------------------------------------- /app14/build.gradle: -------------------------------------------------------------------------------- 1 | apply plugin: 'com.android.application' 2 | 3 | android { 4 | compileSdkVersion 23 5 | buildToolsVersion "23.0.2" 6 | 7 | defaultConfig { 8 | applicationId "dev.xesam.android.app14" 9 | minSdkVersion 9 10 | targetSdkVersion 23 11 | versionCode 1 12 | versionName "1.0" 13 | } 14 | buildTypes { 15 | release { 16 | minifyEnabled false 17 | proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro' 18 | } 19 | } 20 | } 21 | 22 | dependencies { 23 | compile fileTree(include: ['*.jar'], dir: 'libs') 24 | testCompile 'junit:junit:4.12' 25 | compile 'com.android.support:appcompat-v7:23.2.0' 26 | compile project(':app-monitor') 27 | } 28 | -------------------------------------------------------------------------------- /app14/proguard-rules.pro: -------------------------------------------------------------------------------- 1 | # Add project specific ProGuard rules here. 2 | # By default, the flags in this file are appended to flags specified 3 | # in /apps/android-sdk-linux/tools/proguard/proguard-android.txt 4 | # You can edit the include path and order by changing the proguardFiles 5 | # directive in build.gradle. 6 | # 7 | # For more details, see 8 | # http://developer.android.com/guide/developing/tools/proguard.html 9 | 10 | # Add any project specific keep options here: 11 | 12 | # If your project uses WebView with JS, uncomment the following 13 | # and specify the fully qualified class name to the JavaScript interface 14 | # class: 15 | #-keepclassmembers class fqcn.of.javascript.interface.for.webview { 16 | # public *; 17 | #} 18 | -------------------------------------------------------------------------------- /app14/src/main/AndroidManifest.xml: -------------------------------------------------------------------------------- 1 | 2 | 4 | 5 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | -------------------------------------------------------------------------------- /app14/src/main/java/dev/xesam/android/app14/App.java: -------------------------------------------------------------------------------- 1 | package dev.xesam.android.app14; 2 | 3 | import android.app.Application; 4 | 5 | import dev.xesam.android.toolbox.appmonitor.ProcessMonitor; 6 | 7 | /** 8 | * Created by xesamguo@gmail.com on 16-3-7. 9 | */ 10 | public class App extends Application { 11 | @Override 12 | public void onCreate() { 13 | super.onCreate(); 14 | ProcessMonitor.attach(this); 15 | } 16 | 17 | @Override 18 | public void onTerminate() { 19 | super.onTerminate(); 20 | ProcessMonitor.detach(this); 21 | } 22 | } 23 | -------------------------------------------------------------------------------- /app14/src/main/java/dev/xesam/android/app14/MainActivity.java: -------------------------------------------------------------------------------- 1 | package dev.xesam.android.app14; 2 | 3 | import android.support.v7.app.AppCompatActivity; 4 | import android.os.Bundle; 5 | 6 | public class MainActivity extends AppCompatActivity { 7 | 8 | @Override 9 | protected void onCreate(Bundle savedInstanceState) { 10 | super.onCreate(savedInstanceState); 11 | setContentView(R.layout.activity_main); 12 | } 13 | } 14 | -------------------------------------------------------------------------------- /app14/src/main/res/drawable/ic_launcher.png: -------------------------------------------------------------------------------- https://raw.githubusercontent.com/xesam/AppMonitor/049bbef8d858fbcd6f328288437a6e2854927ef4/app14/src/main/res/drawable/ic_launcher.png -------------------------------------------------------------------------------- /app14/src/main/res/layout/activity_main.xml: -------------------------------------------------------------------------------- 1 | 2 | 11 | 12 | 16 | 17 | -------------------------------------------------------------------------------- /app14/src/main/res/values/colors.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | #3F51B5 4 | #303F9F 5 | #FF4081 6 | 7 | -------------------------------------------------------------------------------- /app14/src/main/res/values/dimens.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 16dp 4 | 16dp 5 | 6 | -------------------------------------------------------------------------------- /app14/src/main/res/values/strings.xml: -------------------------------------------------------------------------------- 1 | 2 | App14 3 | 4 | -------------------------------------------------------------------------------- /app14/src/main/res/values/styles.xml: -------------------------------------------------------------------------------- 1 | 2 | 3 | 4 | 10 | 11 | 12 | -------------------------------------------------------------------------------- /build.gradle: -------------------------------------------------------------------------------- 1 | // Top-level build file where you can add configuration options common to all sub-projects/modules. 2 | 3 | buildscript { 4 | repositories { 5 | jcenter() 6 | } 7 | dependencies { 8 | classpath 'com.android.tools.build:gradle:2.0.0-beta6' 9 | 10 | // NOTE: Do not place your application dependencies here; they belong 11 | // in the individual module build.gradle files 12 | } 13 | } 14 | 15 | allprojects { 16 | repositories { 17 | jcenter() 18 | } 19 | } 20 | 21 | task clean(type: Delete) { 22 | delete rootProject.buildDir 23 | } 24 | -------------------------------------------------------------------------------- /gradle.properties: -------------------------------------------------------------------------------- 1 | # Project-wide Gradle settings. 2 | 3 | # IDE (e.g. Android Studio) users: 4 | # Gradle settings configured through the IDE *will override* 5 | # any settings specified in this file. 6 | 7 | # For more details on how to configure your build environment visit 8 | # http://www.gradle.org/docs/current/userguide/build_environment.html 9 | 10 | # Specifies the JVM arguments used for the daemon process. 11 | # The setting is particularly useful for tweaking memory settings. 12 | # Default value: -Xmx10248m -XX:MaxPermSize=256m 13 | # org.gradle.jvmargs=-Xmx2048m -XX:MaxPermSize=512m -XX:+HeapDumpOnOutOfMemoryError -Dfile.encoding=UTF-8 14 | 15 | # When configured, Gradle will run in incubating parallel mode. 16 | # This option should only be used with decoupled projects. More details, visit 17 | # http://www.gradle.org/docs/current/userguide/multi_project_builds.html#sec:decoupled_projects 18 | # org.gradle.parallel=true -------------------------------------------------------------------------------- /gradlew: -------------------------------------------------------------------------------- 1 | #!/usr/bin/env bash 2 | 3 | ############################################################################## 4 | ## 5 | ## Gradle start up script for UN*X 6 | ## 7 | ############################################################################## 8 | 9 | # Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 10 | DEFAULT_JVM_OPTS="" 11 | 12 | APP_NAME="Gradle" 13 | APP_BASE_NAME=`basename "$0"` 14 | 15 | # Use the maximum available, or set MAX_FD != -1 to use that value. 16 | MAX_FD="maximum" 17 | 18 | warn ( ) { 19 | echo "$*" 20 | } 21 | 22 | die ( ) { 23 | echo 24 | echo "$*" 25 | echo 26 | exit 1 27 | } 28 | 29 | # OS specific support (must be 'true' or 'false'). 30 | cygwin=false 31 | msys=false 32 | darwin=false 33 | case "`uname`" in 34 | CYGWIN* ) 35 | cygwin=true 36 | ;; 37 | Darwin* ) 38 | darwin=true 39 | ;; 40 | MINGW* ) 41 | msys=true 42 | ;; 43 | esac 44 | 45 | # Attempt to set APP_HOME 46 | # Resolve links: $0 may be a link 47 | PRG="$0" 48 | # Need this for relative symlinks. 49 | while [ -h "$PRG" ] ; do 50 | ls=`ls -ld "$PRG"` 51 | link=`expr "$ls" : '.*-> \(.*\)$'` 52 | if expr "$link" : '/.*' > /dev/null; then 53 | PRG="$link" 54 | else 55 | PRG=`dirname "$PRG"`"/$link" 56 | fi 57 | done 58 | SAVED="`pwd`" 59 | cd "`dirname \"$PRG\"`/" >/dev/null 60 | APP_HOME="`pwd -P`" 61 | cd "$SAVED" >/dev/null 62 | 63 | CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar 64 | 65 | # Determine the Java command to use to start the JVM. 66 | if [ -n "$JAVA_HOME" ] ; then 67 | if [ -x "$JAVA_HOME/jre/sh/java" ] ; then 68 | # IBM's JDK on AIX uses strange locations for the executables 69 | JAVACMD="$JAVA_HOME/jre/sh/java" 70 | else 71 | JAVACMD="$JAVA_HOME/bin/java" 72 | fi 73 | if [ ! -x "$JAVACMD" ] ; then 74 | die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME 75 | 76 | Please set the JAVA_HOME variable in your environment to match the 77 | location of your Java installation." 78 | fi 79 | else 80 | JAVACMD="java" 81 | which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 82 | 83 | Please set the JAVA_HOME variable in your environment to match the 84 | location of your Java installation." 85 | fi 86 | 87 | # Increase the maximum file descriptors if we can. 88 | if [ "$cygwin" = "false" -a "$darwin" = "false" ] ; then 89 | MAX_FD_LIMIT=`ulimit -H -n` 90 | if [ $? -eq 0 ] ; then 91 | if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ] ; then 92 | MAX_FD="$MAX_FD_LIMIT" 93 | fi 94 | ulimit -n $MAX_FD 95 | if [ $? -ne 0 ] ; then 96 | warn "Could not set maximum file descriptor limit: $MAX_FD" 97 | fi 98 | else 99 | warn "Could not query maximum file descriptor limit: $MAX_FD_LIMIT" 100 | fi 101 | fi 102 | 103 | # For Darwin, add options to specify how the application appears in the dock 104 | if $darwin; then 105 | GRADLE_OPTS="$GRADLE_OPTS \"-Xdock:name=$APP_NAME\" \"-Xdock:icon=$APP_HOME/media/gradle.icns\"" 106 | fi 107 | 108 | # For Cygwin, switch paths to Windows format before running java 109 | if $cygwin ; then 110 | APP_HOME=`cygpath --path --mixed "$APP_HOME"` 111 | CLASSPATH=`cygpath --path --mixed "$CLASSPATH"` 112 | JAVACMD=`cygpath --unix "$JAVACMD"` 113 | 114 | # We build the pattern for arguments to be converted via cygpath 115 | ROOTDIRSRAW=`find -L / -maxdepth 1 -mindepth 1 -type d 2>/dev/null` 116 | SEP="" 117 | for dir in $ROOTDIRSRAW ; do 118 | ROOTDIRS="$ROOTDIRS$SEP$dir" 119 | SEP="|" 120 | done 121 | OURCYGPATTERN="(^($ROOTDIRS))" 122 | # Add a user-defined pattern to the cygpath arguments 123 | if [ "$GRADLE_CYGPATTERN" != "" ] ; then 124 | OURCYGPATTERN="$OURCYGPATTERN|($GRADLE_CYGPATTERN)" 125 | fi 126 | # Now convert the arguments - kludge to limit ourselves to /bin/sh 127 | i=0 128 | for arg in "$@" ; do 129 | CHECK=`echo "$arg"|egrep -c "$OURCYGPATTERN" -` 130 | CHECK2=`echo "$arg"|egrep -c "^-"` ### Determine if an option 131 | 132 | if [ $CHECK -ne 0 ] && [ $CHECK2 -eq 0 ] ; then ### Added a condition 133 | eval `echo args$i`=`cygpath --path --ignore --mixed "$arg"` 134 | else 135 | eval `echo args$i`="\"$arg\"" 136 | fi 137 | i=$((i+1)) 138 | done 139 | case $i in 140 | (0) set -- ;; 141 | (1) set -- "$args0" ;; 142 | (2) set -- "$args0" "$args1" ;; 143 | (3) set -- "$args0" "$args1" "$args2" ;; 144 | (4) set -- "$args0" "$args1" "$args2" "$args3" ;; 145 | (5) set -- "$args0" "$args1" "$args2" "$args3" "$args4" ;; 146 | (6) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" ;; 147 | (7) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" ;; 148 | (8) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" ;; 149 | (9) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" "$args8" ;; 150 | esac 151 | fi 152 | 153 | # Split up the JVM_OPTS And GRADLE_OPTS values into an array, following the shell quoting and substitution rules 154 | function splitJvmOpts() { 155 | JVM_OPTS=("$@") 156 | } 157 | eval splitJvmOpts $DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS 158 | JVM_OPTS[${#JVM_OPTS[*]}]="-Dorg.gradle.appname=$APP_BASE_NAME" 159 | 160 | exec "$JAVACMD" "${JVM_OPTS[@]}" -classpath "$CLASSPATH" org.gradle.wrapper.GradleWrapperMain "$@" 161 | -------------------------------------------------------------------------------- /gradlew.bat: -------------------------------------------------------------------------------- 1 | @if "%DEBUG%" == "" @echo off 2 | @rem ########################################################################## 3 | @rem 4 | @rem Gradle startup script for Windows 5 | @rem 6 | @rem ########################################################################## 7 | 8 | @rem Set local scope for the variables with windows NT shell 9 | if "%OS%"=="Windows_NT" setlocal 10 | 11 | @rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script. 12 | set DEFAULT_JVM_OPTS= 13 | 14 | set DIRNAME=%~dp0 15 | if "%DIRNAME%" == "" set DIRNAME=. 16 | set APP_BASE_NAME=%~n0 17 | set APP_HOME=%DIRNAME% 18 | 19 | @rem Find java.exe 20 | if defined JAVA_HOME goto findJavaFromJavaHome 21 | 22 | set JAVA_EXE=java.exe 23 | %JAVA_EXE% -version >NUL 2>&1 24 | if "%ERRORLEVEL%" == "0" goto init 25 | 26 | echo. 27 | echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 28 | echo. 29 | echo Please set the JAVA_HOME variable in your environment to match the 30 | echo location of your Java installation. 31 | 32 | goto fail 33 | 34 | :findJavaFromJavaHome 35 | set JAVA_HOME=%JAVA_HOME:"=% 36 | set JAVA_EXE=%JAVA_HOME%/bin/java.exe 37 | 38 | if exist "%JAVA_EXE%" goto init 39 | 40 | echo. 41 | echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 42 | echo. 43 | echo Please set the JAVA_HOME variable in your environment to match the 44 | echo location of your Java installation. 45 | 46 | goto fail 47 | 48 | :init 49 | @rem Get command-line arguments, handling Windowz variants 50 | 51 | if not "%OS%" == "Windows_NT" goto win9xME_args 52 | if "%@eval[2+2]" == "4" goto 4NT_args 53 | 54 | :win9xME_args 55 | @rem Slurp the command line arguments. 56 | set CMD_LINE_ARGS= 57 | set _SKIP=2 58 | 59 | :win9xME_args_slurp 60 | if "x%~1" == "x" goto execute 61 | 62 | set CMD_LINE_ARGS=%* 63 | goto execute 64 | 65 | :4NT_args 66 | @rem Get arguments from the 4NT Shell from JP Software 67 | set CMD_LINE_ARGS=%$ 68 | 69 | :execute 70 | @rem Setup the command line 71 | 72 | set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar 73 | 74 | @rem Execute Gradle 75 | "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" org.gradle.wrapper.GradleWrapperMain %CMD_LINE_ARGS% 76 | 77 | :end 78 | @rem End local scope for the variables with windows NT shell 79 | if "%ERRORLEVEL%"=="0" goto mainEnd 80 | 81 | :fail 82 | rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of 83 | rem the _cmd.exe /c_ return code! 84 | if not "" == "%GRADLE_EXIT_CONSOLE%" exit 1 85 | exit /b 1 86 | 87 | :mainEnd 88 | if "%OS%"=="Windows_NT" endlocal 89 | 90 | :omega 91 | -------------------------------------------------------------------------------- /settings.gradle: -------------------------------------------------------------------------------- 1 | include ':app', ':app-monitor', ':app14' 2 | --------------------------------------------------------------------------------