├── .github └── workflows │ ├── build-padavan-mi3.yml │ ├── build-padavan-r3g.yml │ └── build-padavan-rm2100.yml └── README.md /.github/workflows/build-padavan-mi3.yml: -------------------------------------------------------------------------------- 1 | #修改TNAME: K2P-5.0 中的K2P-5.0为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同 2 | name: Build Padavan mi3 3 | 4 | on: 5 | release: 6 | types: [published] 7 | push: 8 | tags: 9 | - 'v*' 10 | # branches: 11 | # - master 12 | # schedule: 13 | # - cron: 0 8 * * 5 14 | watch: 15 | types: [started] 16 | 17 | jobs: 18 | build: 19 | runs-on: ubuntu-18.04 20 | if: github.event.repository.owner.id == github.event.sender.id 21 | 22 | steps: 23 | - name: Checkout 24 | uses: actions/checkout@master 25 | - name: Initialization environment 26 | env: 27 | DEBIAN_FRONTEND: noninteractive 28 | run: | 29 | sudo apt-get update 30 | sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \ 31 | cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \ 32 | pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget 33 | - name: Clone source code 34 | run: | 35 | git clone --depth=1 https://github.com/xumng123/rt-n56u.git /opt/rt-n56u 36 | cd /opt/rt-n56u/toolchain-mipsel 37 | sh dl_toolchain.sh 38 | mkdir -p /opt/images/ 39 | - name: Build Firmware 40 | env: 41 | #TNAME: RM2100 42 | TNAME: MI-3 43 | run: | 44 | cd /opt/rt-n56u/trunk 45 | if [ ! -f configs/templates/$TNAME.config ] ; then 46 | echo "configs/templates/$TNAME.config not found " 47 | exit 1 48 | fi 49 | cp -f configs/templates/$TNAME.config .config 50 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 51 | ################################################################################################ 52 | #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！ 53 | ################################################################################################ 54 | sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST 55 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT 56 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+ 57 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server 58 | sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER 59 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+ 60 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项adbyby plus+ 61 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项adbyby plus+ 62 | sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项adbyby plus+ 63 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS 64 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config 65 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config 66 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 67 | ###################################################################### 68 | #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件 69 | ###################################################################### 70 | echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST 71 | echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT 72 | echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+ 73 | echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件 74 | echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server 75 | echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER 76 | echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=n" >> .config #adbyby plus+ 77 | echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC 78 | echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS 79 | echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE 80 | echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=n" >> .config #阿里DDNS 81 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=n" >> .config #smartdns 82 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=n" >> .config #smartdns二进制文件 83 | echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=y" >> .config #集成v2ray执行文件（3.8M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 84 | echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config #集成trojan执行文件(1.1M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 85 | echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=n" >> .config #KP广告过滤 86 | echo "CONFIG_FIRMWARE_INCLUDE_CADDY=n" >> .config #在线文件管理服务 87 | echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用 88 | echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=n" >> .config 89 | echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成 90 | echo "CONFIG_FIRMWARE_INCLUDE_WYY=n" >> .config #网易云解锁 91 | echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载 92 | echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=y" >> .config #zerotier ~1.3M 93 | ######################################################################################### 94 | #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可 95 | #格式如下： 96 | #sed -i '/自定义项/d' .config 97 | #echo "自定义项=y" >> .config 98 | ######################################################################################### 99 | sudo ./clear_tree 100 | sudo ./build_firmware_modify $TNAME 0 101 | sudo mv -f images/*.trx /opt/images/ 102 | - name : Upload packages 103 | uses: actions/upload-artifact@master 104 | if: always() 105 | with: 106 | name: Padavan-packages 107 | path: /opt/images 108 | -------------------------------------------------------------------------------- /.github/workflows/build-padavan-r3g.yml: -------------------------------------------------------------------------------- 1 | #修改TNAME: K2P-5.0 中的K2P-5.0为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同 2 | name: Build Padavan r3g 3 | 4 | on: 5 | release: 6 | types: [published] 7 | push: 8 | tags: 9 | - 'v*' 10 | # branches: 11 | # - master 12 | # schedule: 13 | # - cron: 0 8 * * 5 14 | watch: 15 | types: [started] 16 | 17 | jobs: 18 | build: 19 | runs-on: ubuntu-18.04 20 | if: github.event.repository.owner.id == github.event.sender.id 21 | 22 | steps: 23 | - name: Checkout 24 | uses: actions/checkout@master 25 | - name: Initialization environment 26 | env: 27 | DEBIAN_FRONTEND: noninteractive 28 | run: | 29 | sudo apt-get update 30 | sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \ 31 | cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \ 32 | pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget 33 | - name: Clone source code 34 | run: | 35 | git clone --depth=1 https://github.com/xumng123/rt-n56u.git /opt/rt-n56u 36 | cd /opt/rt-n56u/toolchain-mipsel 37 | sh dl_toolchain.sh 38 | mkdir -p /opt/images/ 39 | - name: Build Firmware 40 | env: 41 | #TNAME: RM2100 42 | TNAME: MI-R3G 43 | run: | 44 | cd /opt/rt-n56u/trunk 45 | if [ ! -f configs/templates/$TNAME.config ] ; then 46 | echo "configs/templates/$TNAME.config not found " 47 | exit 1 48 | fi 49 | cp -f configs/templates/$TNAME.config .config 50 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 51 | ################################################################################################ 52 | #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！ 53 | ################################################################################################ 54 | sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST 55 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT 56 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+ 57 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server 58 | sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER 59 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+ 60 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项adbyby plus+ 61 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项adbyby plus+ 62 | sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项adbyby plus+ 63 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS 64 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config 65 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config 66 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 67 | ###################################################################### 68 | #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件 69 | ###################################################################### 70 | echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST 71 | echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT 72 | echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+ 73 | echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件 74 | echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server 75 | echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER 76 | echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=n" >> .config #adbyby plus+ 77 | echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC 78 | echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS 79 | echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE 80 | echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=n" >> .config #阿里DDNS 81 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=n" >> .config #smartdns 82 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=n" >> .config #smartdns二进制文件 83 | echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=y" >> .config #集成v2ray执行文件（3.8M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 84 | echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config #集成trojan执行文件(1.1M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 85 | echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=n" >> .config #KP广告过滤 86 | echo "CONFIG_FIRMWARE_INCLUDE_CADDY=y" >> .config #在线文件管理服务 87 | echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用 88 | echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=y" >> .config 89 | echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成 90 | echo "CONFIG_FIRMWARE_INCLUDE_WYY=n" >> .config #网易云解锁 91 | echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载 92 | echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=y" >> .config #zerotier ~1.3M 93 | ######################################################################################### 94 | #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可 95 | #格式如下： 96 | #sed -i '/自定义项/d' .config 97 | #echo "自定义项=y" >> .config 98 | ######################################################################################### 99 | sudo ./clear_tree 100 | sudo ./build_firmware_modify $TNAME 0 101 | sudo mv -f images/*.trx /opt/images/ 102 | - name : Upload packages 103 | uses: actions/upload-artifact@master 104 | if: always() 105 | with: 106 | name: Padavan-packages 107 | path: /opt/images 108 | -------------------------------------------------------------------------------- /.github/workflows/build-padavan-rm2100.yml: -------------------------------------------------------------------------------- 1 | #修改TNAME: K2P-5.0 中的K2P-5.0为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同 2 | name: Build Padavan rm2100 3 | 4 | on: 5 | release: 6 | types: [published] 7 | push: 8 | tags: 9 | - 'v*' 10 | # branches: 11 | # - master 12 | # schedule: 13 | # - cron: 0 8 * * 5 14 | watch: 15 | types: [started] 16 | 17 | jobs: 18 | build: 19 | runs-on: ubuntu-18.04 20 | if: github.event.repository.owner.id == github.event.sender.id 21 | 22 | steps: 23 | - name: Checkout 24 | uses: actions/checkout@master 25 | - name: Initialization environment 26 | env: 27 | DEBIAN_FRONTEND: noninteractive 28 | run: | 29 | sudo apt-get update 30 | sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \ 31 | cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \ 32 | pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget 33 | - name: Clone source code 34 | run: | 35 | git clone --depth=1 https://github.com/xumng123/rt-n56u.git /opt/rt-n56u 36 | cd /opt/rt-n56u/toolchain-mipsel 37 | sh dl_toolchain.sh 38 | mkdir -p /opt/images/ 39 | - name: Build Firmware 40 | env: 41 | TNAME: RM2100 42 | #TNAME: MI-R3G 43 | run: | 44 | cd /opt/rt-n56u/trunk 45 | if [ ! -f configs/templates/$TNAME.config ] ; then 46 | echo "configs/templates/$TNAME.config not found " 47 | exit 1 48 | fi 49 | cp -f configs/templates/$TNAME.config .config 50 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 51 | ################################################################################################ 52 | #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！ 53 | ################################################################################################ 54 | sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST 55 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT 56 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+ 57 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server 58 | sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER 59 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+ 60 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项adbyby plus+ 61 | sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项adbyby plus+ 62 | sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项adbyby plus+ 63 | sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS 64 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config 65 | sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config 66 | sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config 67 | ###################################################################### 68 | #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件 69 | ###################################################################### 70 | echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST 71 | echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT 72 | echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+ 73 | echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件 74 | echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server 75 | echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER 76 | echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=n" >> .config #adbyby plus+ 77 | echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC 78 | echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS 79 | echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE 80 | echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=n" >> .config #阿里DDNS 81 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=n" >> .config #smartdns 82 | echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=n" >> .config #smartdns二进制文件 83 | echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=y" >> .config #集成v2ray执行文件（3.8M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 84 | echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config #集成trojan执行文件(1.1M左右)，如果不集成，会从网上下载下来执行，不影响正常使用 85 | echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=n" >> .config #KP广告过滤 86 | echo "CONFIG_FIRMWARE_INCLUDE_CADDY=y" >> .config #在线文件管理服务 87 | echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用 88 | echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=y" >> .config 89 | echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成 90 | echo "CONFIG_FIRMWARE_INCLUDE_WYY=n" >> .config #网易云解锁 91 | echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载 92 | echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=y" >> .config #zerotier ~1.3M 93 | ######################################################################################### 94 | #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可 95 | #格式如下： 96 | #sed -i '/自定义项/d' .config 97 | #echo "自定义项=y" >> .config 98 | ######################################################################################### 99 | sudo ./clear_tree 100 | sudo ./build_firmware_modify $TNAME 0 101 | sudo mv -f images/*.trx /opt/images/ 102 | - name : Upload packages 103 | uses: actions/upload-artifact@master 104 | if: always() 105 | with: 106 | name: Padavan-packages 107 | path: /opt/images 108 | -------------------------------------------------------------------------------- /README.md: -------------------------------------------------------------------------------- 1 | # Padavan-build说明 2 | 现在不需要新建Release了，已经更改了脚本，直接fork，修改好之后，点击右上角的 Star 星星按钮即可开始自动编译（自己点击才会编译）。 3 | 4 | 只保留了adguardhome dns服务器，并默认配置了ali doh和dnspod的doh。 5 | 6 | 更新xray为1.4.3。 7 | --------------------------------------------------------------------------------